1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Actions Semi S500 SoC pinmux & GPIO controller
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
description: |
Pinmux & GPIO controller manages pin multiplexing & configuration including
GPIO function selection & GPIO attributes configuration. Please refer to
pinctrl-bindings.txt in this directory for common binding part and usage.
properties:
compatible:
const: actions,s500-pinctrl
reg:
items:
- description: GPIO Output + GPIO Input + GPIO Data
- description: Multiplexing Control
- description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
- description: PAD Drive Capacity Select
minItems: 1
clocks:
maxItems: 1
gpio-controller: true
gpio-ranges:
maxItems: 1
'#gpio-cells':
description:
Specifies the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
interrupt-controller: true
'#interrupt-cells':
description:
Specifies the pin number and flags, as defined in
include/dt-bindings/interrupt-controller/irq.h
const: 2
interrupts:
description:
One interrupt per each of the 5 GPIO ports supported by the controller,
sorted by port number ascending order.
minItems: 5
maxItems: 5
patternProperties:
'-pins$':
type: object
patternProperties:
'^(.*-)?pinmux$':
type: object
description:
Pinctrl node's client devices specify pin muxes using subnodes,
which in turn use the standard properties below.
$ref: pinmux-node.yaml#
properties:
groups:
description:
List of gpio pin groups affected by the functions specified in
this subnode.
items:
oneOf:
- enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
nand_ceb3_mfp]
minItems: 1
maxItems: 32
function:
description:
Specify the alternative function to be configured for the
given gpio pin groups.
enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
mipi_csi, nand, spdif, ts, lcd0]
required:
- groups
- function
additionalProperties: false
'^(.*-)?pinconf$':
type: object
description:
Pinctrl node's client devices specify pin configurations using
subnodes, which in turn use the standard properties below.
$ref: pincfg-node.yaml#
properties:
groups:
description:
List of gpio pin groups affected by the drive-strength property
specified in this subnode.
items:
oneOf:
- enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
sens0_ckout_drv, uart3_all_drv]
minItems: 1
maxItems: 32
pins:
description:
List of gpio pins affected by the bias-pull-* and
input-schmitt-* properties specified in this subnode.
items:
oneOf:
- enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
pkg2, pkg3]
minItems: 1
maxItems: 64
bias-pull-up: true
bias-pull-down: true
drive-strength:
description:
Selects the drive strength for the specified pins, in mA.
enum: [2, 4, 8, 12]
input-schmitt-enable: true
input-schmitt-disable: true
additionalProperties: false
additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- clocks
- gpio-controller
- gpio-ranges
- '#gpio-cells'
- interrupt-controller
- '#interrupt-cells'
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
pinctrl: pinctrl@b01b0000 {
compatible = "actions,s500-pinctrl";
reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
<0xb01b0060 0x18>, <0xb01b0080 0xc>;
clocks = <&cmu 55>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 132>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
mmc0_pins: mmc0-pins {
pinmux {
groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
"sd0_cmd_mfp", "sd0_clk_mfp";
function = "sd0";
};
drv-pinconf {
groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
drive-strength = <8>;
};
bias-pinconf {
pins = "sd0_d0", "sd0_d1", "sd0_d2",
"sd0_d3", "sd0_cmd";
bias-pull-up;
};
};
};
...
|
