1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
* Broadcom Starfighter 2 integrated swich
Required properties:
- compatible: should be "brcm,bcm7445-switch-v4.0"
- reg: addresses and length of the register sets for the device, must be 6
pairs of register addresses and lengths
- interrupts: interrupts for the devices, must be two interrupts
- #address-cells: must be 1, see dsa/dsa.txt
- #size-cells: must be 0, see dsa/dsa.txt
Deprecated binding required properties:
- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
- #address-cells: must be 2, see dsa/dsa.txt
Subnodes:
The integrated switch subnode should be specified according to the binding
described in dsa/dsa.txt.
Optional properties:
- reg-names: litteral names for the device base register addresses, when present
must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
- interrupt-names: litternal names for the device interrupt lines, when present
must be: "switch_0" and "switch_1"
- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
switch
- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
by the switch
- brcm,fcb-pause-override: boolean property, if present indicates that the switch
supports Failover Control Block pause override capability
- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
Admission Control Block supports reporting the number of packets in-flight in a
switch queue
Example:
switch_top@f0b00000 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0 0xf0b00000 0x40804>;
ethernet_switch@0 {
compatible = "brcm,bcm7445-switch-v4.0";
#size-cells = <0>;
#address-cells = <1>;
reg = <0x0 0x40000
0x40000 0x110
0x40340 0x30
0x40380 0x30
0x40400 0x34
0x40600 0x208>;
reg-names = "core", "reg", intrl2_0", "intrl2_1",
"fcb, "acb";
interrupts = <0 0x18 0
0 0x19 0>;
brcm,num-gphy = <1>;
brcm,num-rgmii-ports = <2>;
brcm,fcb-pause-override;
brcm,acb-packets-inflight;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
label = "gphy";
reg = <0>;
};
};
};
};
Example using the old DSA DeviceTree binding:
switch_top@f0b00000 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0 0xf0b00000 0x40804>;
ethernet_switch@0 {
compatible = "brcm,bcm7445-switch-v4.0";
#size-cells = <0>;
#address-cells = <2>;
reg = <0x0 0x40000
0x40000 0x110
0x40340 0x30
0x40380 0x30
0x40400 0x34
0x40600 0x208>;
interrupts = <0 0x18 0
0 0x19 0>;
brcm,num-gphy = <1>;
brcm,num-rgmii-ports = <2>;
brcm,fcb-pause-override;
brcm,acb-packets-inflight;
...
switch@0 {
reg = <0 0>;
#size-cells = <0>;
#address-cells <1>;
port@0 {
label = "gphy";
reg = <0>;
};
...
};
};
};
|
