1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Fixed partitions
description: |
This binding can be used on platforms which have strong conventions about
which portions of a flash are used for what purposes, but which don't use an
on-flash partition table such as RedBoot.
The partition table should be a node named "partitions". Partitions are then
defined as subnodes.
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
properties:
compatible:
oneOf:
- const: fixed-partitions
- items:
- const: sercomm,sc-partitions
- const: fixed-partitions
"#address-cells": true
"#size-cells": true
patternProperties:
"@[0-9a-f]+$":
allOf:
- $ref: "partition.yaml#"
- if:
properties:
compatible:
contains:
const: sercomm,sc-partitions
then:
properties:
sercomm,scpart-id:
description: Partition id in Sercomm partition map. Mtd
parser uses this id to find a record in the partition map
containing offset and size of the current partition. The
values from partition map overrides partition offset and
size defined in reg property of the dts. Frequently these
values are the same, but may differ if device has bad
eraseblocks on a flash.
$ref: /schemas/types.yaml#/definitions/uint32
required:
- "#address-cells"
- "#size-cells"
additionalProperties: true
examples:
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
uimage@100000 {
reg = <0x0100000 0x200000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <2>;
/* a 4 GiB partition */
partition@0 {
label = "filesystem";
reg = <0x00000000 0x1 0x00000000>;
linux,rootfs;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
#size-cells = <2>;
/* an 8 GiB partition */
partition@0 {
label = "filesystem #1";
reg = <0x0 0x00000000 0x2 0x00000000>;
};
/* a 4 GiB partition */
partition@200000000 {
label = "filesystem #2";
reg = <0x2 0x00000000 0x1 0x00000000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x100000>;
read-only;
};
firmware@100000 {
compatible = "brcm,trx";
label = "firmware";
reg = <0x100000 0xe00000>;
};
calibration@f00000 {
compatible = "fixed-partitions";
label = "calibration";
reg = <0xf00000 0x100000>;
ranges = <0 0xf00000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "wifi0";
reg = <0x000000 0x080000>;
};
partition@80000 {
label = "wifi1";
reg = <0x080000 0x080000>;
};
};
};
- |
partitions {
compatible = "sercomm,sc-partitions", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
sercomm,scpart-id = <0>;
read-only;
};
partition@100000 {
label = "dynamic partition map";
reg = <0x100000 0x100000>;
sercomm,scpart-id = <1>;
};
partition@200000 {
label = "Factory";
reg = <0x200000 0x100000>;
sercomm,scpart-id = <2>;
read-only;
};
};
|
