1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
- Ulf Hansson <ulf.hansson@linaro.org>
description:
The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
reading and writing to MultiMedia and SD cards alike. Over the years
vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
host controllers with very similar characteristics.
allOf:
- $ref: /schemas/arm/primecell.yaml#
- $ref: mmc-controller.yaml#
# We need a select here so we don't match all nodes with 'arm,primecell'
select:
properties:
compatible:
contains:
enum:
- arm,pl180
- arm,pl181
- arm,pl18x
required:
- compatible
properties:
compatible:
oneOf:
- description: The first version of the block, simply called
PL180 and found in the ARM Integrator IM/PD1 logic module.
items:
- const: arm,pl180
- const: arm,primecell
- description: The improved version of the block, found in the
ARM Versatile and later reference designs. Further revisions
exist but get detected at runtime by reading some magic numbers
in the PrimeCell ID registers.
items:
- const: arm,pl181
- const: arm,primecell
- description: Wildcard entry that will let the operating system
inspect the PrimeCell ID registers to determine which hardware
variant of PL180 or PL181 this is.
items:
- const: arm,pl18x
- const: arm,primecell
- description: Entries for STMicroelectronics variant of PL18x.
items:
- enum:
- st,stm32-sdmmc2
- st,stm32mp25-sdmmc2
- const: arm,pl18x
- const: arm,primecell
clocks:
description: One or two clocks, the "apb_pclk" and the "MCLK"
which is the core block clock. The names are not compulsory.
minItems: 1
maxItems: 2
dmas:
maxItems: 2
dma-names:
oneOf:
- items:
- const: tx
- const: rx
- items:
- const: rx
- const: tx
access-controllers:
minItems: 1
maxItems: 2
power-domains: true
resets:
maxItems: 1
reg:
description: the MMIO memory window must be exactly 4KB (0x1000) and the
layout should provide the PrimeCell ID registers so that the device can
be discovered. On ST Micro variants, a second register window may be
defined if a delay block is present and used for tuning.
interrupts:
description: The first interrupt is the command interrupt and corresponds
to the event at the end of a command. The second interrupt is the
PIO (polled I/O) interrupt and occurs when the FIFO needs to be
emptied as part of a bulk read from the card. Some variants have these
two interrupts wired into the same line (logic OR) and in that case
only one interrupt may be provided. The interrupt-names property is
not used due to inconsistency of existing DTs regarding its content.
deprecated: false
minItems: 1
maxItems: 2
st,sig-dir-dat0:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, bus signal direction pins used for
DAT[0].
st,sig-dir-dat2:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, bus signal direction pins used for
DAT[2].
st,sig-dir-dat31:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, bus signal direction pins used for
DAT[3] and DAT[1].
st,sig-dir-dat74:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, bus signal direction pins used for
DAT[7] and DAT[4].
st,sig-dir-cmd:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, CMD signal direction used for
pin CMD.
st,sig-pin-fbclk:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, feedback clock FBCLK signal pin
in use.
st,sig-dir:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, signal direction polarity used for
pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
st,neg-edge:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, data and command phase relation,
generated on the sd clock falling edge.
st,use-ckin:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, use CKIN pin from an external
driver to sample the receive data (for example with a voltage switch
transceiver).
st,cmd-gpios:
maxItems: 1
description:
The GPIO matching the CMD pin.
st,ck-gpios:
maxItems: 1
description:
The GPIO matching the CK pin.
st,ckin-gpios:
maxItems: 1
description:
The GPIO matching the CKIN pin.
dependencies:
st,cmd-gpios: [ "st,use-ckin" ]
st,ck-gpios: [ "st,use-ckin" ]
st,ckin-gpios: [ "st,use-ckin" ]
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
mmc@5000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x5000 0x1000>;
interrupts-extended = <&vic 22 &sic 1>;
clocks = <&xtal24mhz>, <&pclk>;
clock-names = "mclk", "apb_pclk";
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
mmc@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
dma-names = "rx", "tx";
clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
clock-names = "sdi", "apb_pclk";
max-frequency = <100000000>;
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
cd-gpios = <&gpio2 31 0x4>;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
st,sig-pin-fbclk;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
};
- |
mmc@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
clocks = <&sdiclk>, <&pclksdi>;
clock-names = "mclk", "apb_pclk";
interrupts = <22>;
max-frequency = <400000>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
full-pwr-cycle;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-dat31;
st,sig-dir-cmd;
st,sig-pin-fbclk;
vmmc-supply = <&vmmc_regulator>;
};
- |
mmc@52007000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x10153180>;
reg = <0x52007000 0x1000>;
interrupts = <49>;
clocks = <&rcc 0>;
clock-names = "apb_pclk";
resets = <&rcc 1>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <120000000>;
};
|
