1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
STMicroelectronics stih4xx platforms
- sti-vtg: video timing generator
Required properties:
- compatible: "st,vtg"
- reg: Physical base address of the IP registers and length of memory mapped region.
Optional properties:
- interrupts : VTG interrupt number to the CPU.
- st,slave: phandle on a slave vtg
- sti-vtac: video timing advanced inter dye communication Rx and TX
Required properties:
- compatible: "st,vtac-main" or "st,vtac-aux"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- sti-display-subsystem: Master device for DRM sub-components
This device must be the parent of all the sub-components and is responsible
of bind them.
Required properties:
- compatible: "st,sti-display-subsystem"
- ranges: to allow probing of subdevices
- sti-compositor: frame compositor engine
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-compositor"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- st,vtg: phandle(s) on vtg device (main and aux) nodes.
- sti-tvout: video out hardware block
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-tvout"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- sti-hdmi: hdmi output block
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-hdmi";
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- interrupts : HDMI interrupt number to the CPU.
- interrupt-names: name of the interrupts listed in interrupts property in
the same order
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
- clock-names: names of the clocks listed in clocks property in the same
order.
- ddc: phandle of an I2C controller used for DDC EDID probing
sti-hda:
Required properties:
must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-hda"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
sti-dvo:
Required properties:
must be a child of sti-display-subsystem
- compatible: "st,stih<chip>-dvo"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- pinctrl-0: pin control handle
- pinctrl-name: names of the pin control to use
- sti,panel: phandle of the panel connected to the DVO output
sti-hqvdp:
must be a child of sti-display-subsystem
Required properties:
- compatible: "st,stih<chip>-hqvdp"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- resets: resets to be used by the device
See ../reset/reset.txt for details.
- reset-names: names of the resets listed in resets property in the same
order.
- st,vtg: phandle on vtg main device node.
Example:
/ {
...
vtg_main_slave: sti-vtg-main-slave@fe85A800 {
compatible = "st,vtg";
reg = <0xfe85A800 0x300>;
interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
};
vtg_main: sti-vtg-main-master@fd348000 {
compatible = "st,vtg";
reg = <0xfd348000 0x400>;
st,slave = <&vtg_main_slave>;
};
vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
compatible = "st,vtg";
reg = <0xfe858200 0x300>;
interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
};
vtg_aux: sti-vtg-aux-master@fd348400 {
compatible = "st,vtg";
reg = <0xfd348400 0x400>;
st,slave = <&vtg_aux_slave>;
};
sti-vtac-rx-main@fee82800 {
compatible = "st,vtac-main";
reg = <0xfee82800 0x200>;
clock-names = "vtac";
clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
};
sti-vtac-rx-aux@fee82a00 {
compatible = "st,vtac-aux";
reg = <0xfee82a00 0x200>;
clock-names = "vtac";
clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
};
sti-vtac-tx-main@fd349000 {
compatible = "st,vtac-main";
reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
clock-names = "vtac";
clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
};
sti-vtac-tx-aux@fd349200 {
compatible = "st,vtac-aux";
reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
clock-names = "vtac";
clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
};
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
ranges;
sti-compositor@fd340000 {
compatible = "st,stih416-compositor";
reg = <0xfd340000 0x1000>;
clock-names = "compo_main", "compo_aux",
"pix_main", "pix_aux";
clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
<&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
reset-names = "compo-main", "compo-aux";
resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
st,vtg = <&vtg_main>, <&vtg_aux>;
};
sti-tvout@fe000000 {
compatible = "st,stih416-tvout";
reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
reg-names = "tvout-reg", "hda-reg", "syscfg";
reset-names = "tvout";
resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
};
sti-hdmi@fe85c000 {
compatible = "st,stih416-hdmi";
reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
reg-names = "hdmi-reg", "syscfg";
interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
interrupt-names = "irq";
clock-names = "pix", "tmds", "phy", "audio";
clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
};
sti-hda@fe85a000 {
compatible = "st,stih416-hda";
reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
reg-names = "hda-reg", "video-dacs-ctrl";
clock-names = "pix", "hddac";
clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
};
sti-dvo@8d00400 {
compatible = "st,stih407-dvo";
reg = <0x8d00400 0x200>;
reg-names = "dvo-reg";
clock-names = "dvo_pix", "dvo",
"main_parent", "aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
<&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvo>;
sti,panel = <&panel_dvo>;
};
sti-hqvdp@9c000000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
reset-names = "hqvdp";
resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
st,vtg = <&vtg_main>;
};
};
...
};
|
