blob: 542193d77cdf3f05ff817b7fd440c15d22dc26fe (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DLPC3433 MIPI DSI to DMD bridge
maintainers:
- Jagan Teki <jagan@amarulasolutions.com>
- Christopher Vollo <chris@renewoutreach.org>
description: |
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.
It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.
It supports upto 720p resolution with 60 and 120 Hz refresh
rates.
properties:
compatible:
const: ti,dlpc3433
reg:
enum:
- 0x1b
- 0x1d
enable-gpios:
description: PROJ_ON pin, chip powers up PROJ_ON is high.
vcc_intf-supply:
description: A 1.8V/3.3V supply that power the Host I/O.
vcc_flsh-supply:
description: A 1.8V/3.3V supply that power the Flash I/O.
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: Video port for MIPI DSI input.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description: array of physical DSI data lane indexes.
minItems: 1
items:
- const: 1
- const: 2
- const: 3
- const: 4
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: Video port for DMD output.
required:
- port@0
- port@1
required:
- compatible
- reg
- enable-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c1 {
#address-cells = <1>;
#size-cells = <0>;
bridge@1b {
compatible = "ti,dlpc3433";
reg = <0x1b>;
enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2 3 4>;
};
};
port@1 {
reg = <1>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
|
