/* * bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform * (derived from bytcr_rt5640.c) * * Copyright (C) 2015 Intel Corp * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../../codecs/rt5651.h" #include "../atom/sst-atom-controls.h" enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, BYT_RT5651_IN2_MAP, BYT_RT5651_IN1_IN2_MAP, }; enum { BYT_RT5651_JD_NULL = (RT5651_JD_NULL << 4), BYT_RT5651_JD1_1 = (RT5651_JD1_1 << 4), BYT_RT5651_JD1_2 = (RT5651_JD1_2 << 4), BYT_RT5651_JD2 = (RT5651_JD2 << 4), }; enum { BYT_RT5651_OVCD_TH_600UA = (6 << 8), BYT_RT5651_OVCD_TH_1500UA = (15 << 8), BYT_RT5651_OVCD_TH_2000UA = (20 << 8), }; enum { BYT_RT5651_OVCD_SF_0P5 = (RT5651_OVCD_SF_0P5 << 13), BYT_RT5651_OVCD_SF_0P75 = (RT5651_OVCD_SF_0P75 << 13), BYT_RT5651_OVCD_SF_1P0 = (RT5651_OVCD_SF_1P0 << 13), BYT_RT5651_OVCD_SF_1P5 = (RT5651_OVCD_SF_1P5 << 13), }; #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(3, 0)) #define BYT_RT5651_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4) #define BYT_RT5651_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8) #define BYT_RT5651_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13) #define BYT_RT5651_DMIC_EN BIT(16) #define BYT_RT5651_MCLK_EN BIT(17) #define BYT_RT5651_MCLK_25MHZ BIT(18) #define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */ #define BYT_RT5651_SSP0_AIF1 BIT(20) #define BYT_RT5651_SSP0_AIF2 BIT(21) #define BYT_RT5651_HP_LR_SWAPPED BIT(22) #define BYT_RT5651_MONO_SPEAKER BIT(23) #define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ BYT_RT5651_JD1_1 | \ BYT_RT5651_OVCD_TH_2000UA | \ BYT_RT5651_OVCD_SF_0P75) /* jack-detect-source + dmic-en + ovcd-th + -sf + terminating empty entry */ #define MAX_NO_PROPS 5 struct byt_rt5651_private { struct clk *mclk; struct gpio_desc *ext_amp_gpio; struct snd_soc_jack jack; }; /* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP; static void log_quirks(struct device *dev) { if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) dev_info(dev, "quirk IN2_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) dev_info(dev, "quirk IN1_IN2_MAP enabled"); if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { dev_info(dev, "quirk realtek,jack-detect-source %ld\n", BYT_RT5651_JDSRC(byt_rt5651_quirk)); dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); } if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) dev_info(dev, "quirk DMIC enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) dev_info(dev, "quirk MCLK_EN enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) dev_info(dev, "quirk MCLK_25MHZ enabled"); if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) dev_info(dev, "quirk SSP2_AIF2 enabled\n"); if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) dev_info(dev, "quirk SSP0_AIF1 enabled\n"); if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) dev_info(dev, "quirk SSP0_AIF2 enabled\n"); if (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); } #define BYT_CODEC_DAI1 "rt5651-aif1" #define BYT_CODEC_DAI2 "rt5651-aif2" static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, int rate, int bclk_ratio) { int clk_id, clk_freq, ret; /* Configure the PLL before selecting it */ if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { clk_id = RT5651_PLL1_S_BCLK1, clk_freq = rate * bclk_ratio; } else { clk_id = RT5651_PLL1_S_MCLK; if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) clk_freq = 25000000; else clk_freq = 19200000; } ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, rate * 512); if (ret < 0) { dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); return ret; } ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, rate * 512, SND_SOC_CLOCK_IN); if (ret < 0) { dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); return ret; } return 0; } static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); int ret; codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); if (!codec_dai) codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; } if (SND_SOC_DAPM_EVENT_ON(event)) { if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(card->dev, "could not configure MCLK state"); return ret; } } ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50); } else { /* * Set codec clock source to internal clock before * turning off the platform clock. Codec needs clock * for Jack detection and button press */ ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, 48000 * 512, SND_SOC_CLOCK_IN); if (!ret) if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) clk_disable_unprepare(priv->mclk); } if (ret < 0) { dev_err(card->dev, "can't set codec sysclk: %d\n", ret); return ret; } return 0; } static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_card *card = w->dapm->card; struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); if (SND_SOC_DAPM_EVENT_ON(event)) gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); else gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); return 0; } static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Internal Mic", NULL), SND_SOC_DAPM_SPK("Speaker", NULL), SND_SOC_DAPM_LINE("Line In", NULL), SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, rt5651_ext_amp_power_event, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), }; static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Headphone", NULL, "Platform Clock"}, {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"}, {"Speaker", NULL, "Ext Amp Power"}, {"Line In", NULL, "Platform Clock"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, {"Speaker", NULL, "LOUTR"}, {"IN2P", NULL, "Line In"}, {"IN2N", NULL, "Line In"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN1P", NULL, "Internal Mic"}, {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN2P", NULL, "Internal Mic"}, {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN1P", NULL, "Internal Mic"}, {"IN2P", NULL, "Internal Mic"}, {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { {"ssp0 Tx", NULL, "modem_out"}, {"modem_in", NULL, "ssp0 Rx"}, {"AIF1 Playback", NULL, "ssp0 Tx"}, {"ssp0 Rx", NULL, "AIF1 Capture"}, }; static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = { {"ssp0 Tx", NULL, "modem_out"}, {"modem_in", NULL, "ssp0 Rx"}, {"AIF2 Playback", NULL, "ssp0 Tx"}, {"ssp0 Rx", NULL, "AIF2 Capture"}, }; static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = { {"ssp2 Tx", NULL, "codec_out0"}, {"ssp2 Tx", NULL, "codec_out1"}, {"codec_in0", NULL, "ssp2 Rx"}, {"codec_in1", NULL, "ssp2 Rx"}, {"AIF1 Playback", NULL, "ssp2 Tx"}, {"ssp2 Rx", NULL, "AIF1 Capture"}, }; static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = { {"ssp2 Tx", NULL, "codec_out0"}, {"ssp2 Tx", NULL, "codec_out1"}, {"codec_in0", NULL, "ssp2 Rx"}, {"codec_in1", NULL, "ssp2 Rx"}, {"AIF2 Playback", NULL, "ssp2 Tx"}, {"ssp2 Rx", NULL, "AIF2 Capture"}, }; static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), SOC_DAPM_PIN_SWITCH("Internal Mic"), SOC_DAPM_PIN_SWITCH("Speaker"), SOC_DAPM_PIN_SWITCH("Line In"), }; static struct snd_soc_jack_pin bytcr_jack_pins[] = { { .pin = "Headphone", .mask = SND_JACK_HEADPHONE, }, { .pin = "Headset Mic", .mask = SND_JACK_MICROPHONE, }, }; static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->codec_dai; snd_pcm_format_t format = params_format(params); int rate = params_rate(params); int bclk_ratio; if (format == SNDRV_PCM_FORMAT_S16_LE) bclk_ratio = 32; else bclk_ratio = 50; return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio); } static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) { byt_rt5651_quirk = (unsigned long)id->driver_data; return 1; } static const struct dmi_system_id byt_rt5651_quirk_table[] = { { /* Chuwi Hi8 Pro (CWI513) */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | BYT_RT5651_HP_LR_SWAPPED | BYT_RT5651_MONO_SPEAKER), }, { /* Chuwi Vi8 Plus (CWI519) */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | BYT_RT5651_HP_LR_SWAPPED | BYT_RT5651_MONO_SPEAKER), }, { /* I.T.Works TW701, Ployer Momo7w and Trekstor ST70416-6 * (these all use the same mainboard) */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), /* Partial match for all of itWORKS.G.WI71C.JGBMRBA, * TREK.G.WI71C.JGBMRBA0x and MOMO.G.WI71C.MABMRBA02 */ DMI_MATCH(DMI_BIOS_VERSION, ".G.WI71C."), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | BYT_RT5651_SSP0_AIF1 | BYT_RT5651_MONO_SPEAKER), }, { /* KIANO SlimNote 14.2 */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN1_IN2_MAP), }, { /* Minnowboard Max B3 */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), }, .driver_data = (void *)(BYT_RT5651_IN1_MAP), }, { /* Minnowboard Turbot */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ADI"), DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), }, .driver_data = (void *)(BYT_RT5651_MCLK_EN | BYT_RT5651_IN1_MAP), }, { /* VIOS LTH17 */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), }, .driver_data = (void *)(BYT_RT5651_IN1_IN2_MAP | BYT_RT5651_JD1_1 | BYT_RT5651_OVCD_TH_2000UA | BYT_RT5651_OVCD_SF_1P0 | BYT_RT5651_MCLK_EN), }, { /* Yours Y8W81 (and others using the same mainboard) */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), /* Partial match for all devs with a W86C mainboard */ DMI_MATCH(DMI_BIOS_VERSION, ".F.W86C."), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | BYT_RT5651_SSP0_AIF1 | BYT_RT5651_MONO_SPEAKER), }, {} }; /* * Note this MUST be called before snd_soc_register_card(), so that the props * are in place before the codec component driver's probe function parses them. */ static int byt_rt5651_add_codec_device_props(struct device *i2c_dev) { struct property_entry props[MAX_NO_PROPS] = {}; int cnt = 0; props[cnt++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source", BYT_RT5651_JDSRC(byt_rt5651_quirk)); props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-threshold-microamp", BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-scale-factor", BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,dmic-en"); return device_add_properties(i2c_dev, props); } static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) { struct snd_soc_card *card = runtime->card; struct snd_soc_component *codec = runtime->codec_dai->component; struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); const struct snd_soc_dapm_route *custom_map; int num_routes; int ret; card->dapm.idle_bias_off = true; /* Start with RC clk for jack-detect (we disable MCLK below) */ if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) snd_soc_component_update_bits(codec, RT5651_GLB_CLK, RT5651_SCLK_SRC_MASK, RT5651_SCLK_SRC_RCCLK); switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { case BYT_RT5651_IN1_MAP: custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; case BYT_RT5651_IN2_MAP: custom_map = byt_rt5651_intmic_in2_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); break; case BYT_RT5651_IN1_IN2_MAP: custom_map = byt_rt5651_intmic_in1_in2_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); } ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); if (ret) return ret; if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5651_ssp2_aif2_map, ARRAY_SIZE(byt_rt5651_ssp2_aif2_map)); } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5651_ssp0_aif1_map, ARRAY_SIZE(byt_rt5651_ssp0_aif1_map)); } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5651_ssp0_aif2_map, ARRAY_SIZE(byt_rt5651_ssp0_aif2_map)); } else { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5651_ssp2_aif1_map, ARRAY_SIZE(byt_rt5651_ssp2_aif1_map)); } if (ret) return ret; ret = snd_soc_add_card_controls(card, byt_rt5651_controls, ARRAY_SIZE(byt_rt5651_controls)); if (ret) { dev_err(card->dev, "unable to add card controls\n"); return ret; } snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { /* * The firmware might enable the clock at * boot (this information may or may not * be reflected in the enable clock register). * To change the rate we must disable the clock * first to cover these cases. Due to common * clock framework restrictions that do not allow * to disable a clock that has not been enabled, * we need to enable the clock first. */ ret = clk_prepare_enable(priv->mclk); if (!ret) clk_disable_unprepare(priv->mclk); if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) ret = clk_set_rate(priv->mclk, 25000000); else ret = clk_set_rate(priv->mclk, 19200000); if (ret) dev_err(card->dev, "unable to set MCLK rate\n"); } if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { ret = snd_soc_card_jack_new(runtime->card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, &priv->jack, bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins)); if (ret) { dev_err(runtime->dev, "jack creation failed %d\n", ret); return ret; } snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); ret = snd_soc_component_set_jack(codec, &priv->jack, NULL); if (ret) return ret; } return 0; } static const struct snd_soc_pcm_stream byt_rt5651_dai_params = { .formats = SNDRV_PCM_FMTBIT_S24_LE, .rate_min = 48000, .rate_max = 48000, .channels_min = 2, .channels_max = 2, }; static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) { struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); int ret, bits; /* The DSP will covert the FE rate to 48k, stereo */ rate->min = rate->max = 48000; channels->min = channels->max = 2; if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { /* set SSP0 to 16-bit */ params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); bits = 16; } else { /* set SSP2 to 24-bit */ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); bits = 24; } /* * Default mode for SSP configuration is TDM 4 slot, override config * with explicit setting to I2S 2ch. The word length is set with * dai_set_tdm_slot() since there is no other API exposed */ ret = snd_soc_dai_set_fmt(rtd->cpu_dai, SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS ); if (ret < 0) { dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; } ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits); if (ret < 0) { dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); return ret; } return 0; } static const unsigned int rates_48000[] = { 48000, }; static const struct snd_pcm_hw_constraint_list constraints_48000 = { .count = ARRAY_SIZE(rates_48000), .list = rates_48000, }; static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream) { return snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_48000); } static const struct snd_soc_ops byt_rt5651_aif1_ops = { .startup = byt_rt5651_aif1_startup, }; static const struct snd_soc_ops byt_rt5651_be_ssp2_ops = { .hw_params = byt_rt5651_aif1_hw_params, }; static struct snd_soc_dai_link byt_rt5651_dais[] = { [MERR_DPCM_AUDIO] = { .name = "Audio Port", .stream_name = "Audio", .cpu_dai_name = "media-cpu-dai", .codec_dai_name = "snd-soc-dummy-dai", .codec_name = "snd-soc-dummy", .platform_name = "sst-mfld-platform", .nonatomic = true, .dynamic = 1, .dpcm_playback = 1, .dpcm_capture = 1, .ops = &byt_rt5651_aif1_ops, }, [MERR_DPCM_DEEP_BUFFER] = { .name = "Deep-Buffer Audio Port", .stream_name = "Deep-Buffer Audio", .cpu_dai_name = "deepbuffer-cpu-dai", .codec_dai_name = "snd-soc-dummy-dai", .codec_name = "snd-soc-dummy", .platform_name = "sst-mfld-platform", .nonatomic = true, .dynamic = 1, .dpcm_playback = 1, .ops = &byt_rt5651_aif1_ops, }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, .codec_dai_name = "rt5651-aif1", .codec_name = "i2c-10EC5651:00", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .be_hw_params_fixup = byt_rt5651_codec_fixup, .ignore_suspend = 1, .nonatomic = true, .dpcm_playback = 1, .dpcm_capture = 1, .init = byt_rt5651_init, .ops = &byt_rt5651_be_ssp2_ops, }, }; /* SoC card */ static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */ static int byt_rt5651_suspend(struct snd_soc_card *card) { struct snd_soc_component *component; if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) return 0; for_each_card_components(card, component) { if (!strcmp(component->name, byt_rt5651_codec_name)) { dev_dbg(component->dev, "disabling jack detect before suspend\n"); snd_soc_component_set_jack(component, NULL, NULL); break; } } return 0; } static int byt_rt5651_resume(struct snd_soc_card *card) { struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); struct snd_soc_component *component; if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) return 0; for_each_card_components(card, component) { if (!strcmp(component->name, byt_rt5651_codec_name)) { dev_dbg(component->dev, "re-enabling jack detect after resume\n"); snd_soc_component_set_jack(component, &priv->jack, NULL); break; } } return 0; } static struct snd_soc_card byt_rt5651_card = { .name = "bytcr-rt5651", .owner = THIS_MODULE, .dai_link = byt_rt5651_dais, .num_links = ARRAY_SIZE(byt_rt5651_dais), .dapm_widgets = byt_rt5651_widgets, .num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets), .dapm_routes = byt_rt5651_audio_map, .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), .fully_routed = true, .suspend_pre = byt_rt5651_suspend, .resume_post = byt_rt5651_resume, }; static const struct x86_cpu_id baytrail_cpu_ids[] = { { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 }, /* Valleyview */ {} }; static const struct x86_cpu_id cherrytrail_cpu_ids[] = { { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT }, /* Braswell */ {} }; static const struct acpi_gpio_params first_gpio = { 0, 0, false }; static const struct acpi_gpio_params second_gpio = { 1, 0, false }; static const struct acpi_gpio_mapping byt_rt5651_amp_en_first[] = { { "ext-amp-enable-gpios", &first_gpio, 1 }, { }, }; static const struct acpi_gpio_mapping byt_rt5651_amp_en_second[] = { { "ext-amp-enable-gpios", &second_gpio, 1 }, { }, }; /* * Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, other * boards may have I2cSerialBusV2, GpioInt, GpioIo instead. We want the * GpioIo one for the ext-amp-enable-gpio and both count for the index in * acpi_gpio_params index. So we have 2 different mappings and the code * below figures out which one to use. */ struct byt_rt5651_acpi_resource_data { int gpio_count; int gpio_int_idx; }; static int snd_byt_rt5651_acpi_resource(struct acpi_resource *ares, void *arg) { struct byt_rt5651_acpi_resource_data *data = arg; if (ares->type != ACPI_RESOURCE_TYPE_GPIO) return 0; if (ares->data.gpio.connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) data->gpio_int_idx = data->gpio_count; data->gpio_count++; return 0; } static void snd_byt_rt5651_mc_add_amp_en_gpio_mapping(struct device *codec) { struct byt_rt5651_acpi_resource_data data = { 0, -1 }; LIST_HEAD(resources); int ret; ret = acpi_dev_get_resources(ACPI_COMPANION(codec), &resources, snd_byt_rt5651_acpi_resource, &data); if (ret < 0) { dev_warn(codec, "Failed to get ACPI resources, not adding external amplifier GPIO mapping\n"); return; } /* All info we need is gathered during the walk */ acpi_dev_free_resource_list(&resources); switch (data.gpio_int_idx) { case 0: devm_acpi_dev_add_driver_gpios(codec, byt_rt5651_amp_en_second); break; case 1: devm_acpi_dev_add_driver_gpios(codec, byt_rt5651_amp_en_first); break; default: dev_warn(codec, "Unknown GpioInt index %d, not adding external amplifier GPIO mapping\n", data.gpio_int_idx); } } struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ }; static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { const char * const mic_name[] = { "dmic", "in1", "in2", "in12" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; struct device *codec_dev; const char *i2c_name = NULL; const char *hp_swapped; bool is_bytcr = false; int ret_val = 0; int dai_index = 0; int i; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; /* register the soc card */ byt_rt5651_card.dev = &pdev->dev; mach = byt_rt5651_card.dev->platform_data; snd_soc_card_set_drvdata(&byt_rt5651_card, priv); /* fix index of codec dai */ for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { if (!strcmp(byt_rt5651_dais[i].codec_name, "i2c-10EC5651:00")) { dai_index = i; break; } } /* fixup codec name based on HID */ i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); if (!i2c_name) { dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); return -ENODEV; } snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), "%s%s", "i2c-", i2c_name); byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, byt_rt5651_codec_name); if (!codec_dev) return -EPROBE_DEFER; /* * swap SSP0 if bytcr is detected * (will be overridden if DMI quirk is detected) */ if (x86_match_cpu(baytrail_cpu_ids)) { struct sst_platform_info *p_info = mach->pdata; const struct sst_res_info *res_info = p_info->res_info; if (res_info->acpi_ipc_irq_index == 0) is_bytcr = true; } if (is_bytcr) { /* * Baytrail CR platforms may have CHAN package in BIOS, try * to find relevant routing quirk based as done on Windows * platforms. We have to read the information directly from the * BIOS, at this stage the card is not created and the links * with the codec driver/pdata are non-existent */ struct acpi_chan_package chan_package; /* format specified: 2 64-bit integers */ struct acpi_buffer format = {sizeof("NN"), "NN"}; struct acpi_buffer state = {0, NULL}; struct snd_soc_acpi_package_context pkg_ctx; bool pkg_found = false; state.length = sizeof(chan_package); state.pointer = &chan_package; pkg_ctx.name = "CHAN"; pkg_ctx.length = 2; pkg_ctx.format = &format; pkg_ctx.state = &state; pkg_ctx.data_valid = false; pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1; } else if (chan_package.aif_value == 2) { dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; } else { dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); pkg_found = false; } } if (!pkg_found) { /* no BIOS indications, assume SSP0-AIF2 connection */ byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; } } /* check quirks before creating card */ dmi_check_system(byt_rt5651_quirk_table); /* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5651_add_codec_device_props(codec_dev); if (ret_val) { put_device(codec_dev); return ret_val; } /* Cherry Trail devices use an external amplifier enable gpio */ if (x86_match_cpu(cherrytrail_cpu_ids)) { snd_byt_rt5651_mc_add_amp_en_gpio_mapping(codec_dev); priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child( &pdev->dev, "ext-amp-enable", 0, codec_dev->fwnode, GPIOD_OUT_LOW, "speaker-amp"); if (IS_ERR(priv->ext_amp_gpio)) { ret_val = PTR_ERR(priv->ext_amp_gpio); switch (ret_val) { case -ENOENT: priv->ext_amp_gpio = NULL; break; default: dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", ret_val); /* fall through */ case -EPROBE_DEFER: put_device(codec_dev); return ret_val; } } } put_device(codec_dev); log_quirks(&pdev->dev); if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) || (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { /* fixup codec aif name */ snprintf(byt_rt5651_codec_aif_name, sizeof(byt_rt5651_codec_aif_name), "%s", "rt5651-aif2"); byt_rt5651_dais[dai_index].codec_dai_name = byt_rt5651_codec_aif_name; } if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { /* fixup cpu dai name name */ snprintf(byt_rt5651_cpu_dai_name, sizeof(byt_rt5651_cpu_dai_name), "%s", "ssp0-port"); byt_rt5651_dais[dai_index].cpu_dai_name = byt_rt5651_cpu_dai_name; } if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { ret_val = PTR_ERR(priv->mclk); dev_err(&pdev->dev, "Failed to get MCLK from pmc_plt_clk_3: %d\n", ret_val); /* * Fall back to bit clock usage for -ENOENT (clock not * available likely due to missing dependencies), bail * for all other errors, including -EPROBE_DEFER */ if (ret_val != -ENOENT) return ret_val; byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; } } if (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) hp_swapped = "-hp-swapped"; else hp_swapped = ""; snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), "bytcr-rt5651-%s-spk-%s-mic%s", (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? "mono" : "stereo", mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], hp_swapped); byt_rt5651_card.long_name = byt_rt5651_long_name; ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); if (ret_val) { dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", ret_val); return ret_val; } platform_set_drvdata(pdev, &byt_rt5651_card); return ret_val; } static struct platform_driver snd_byt_rt5651_mc_driver = { .driver = { .name = "bytcr_rt5651", }, .probe = snd_byt_rt5651_mc_probe, }; module_platform_driver(snd_byt_rt5651_mc_driver); MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651"); MODULE_AUTHOR("Pierre-Louis Bossart "); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:bytcr_rt5651");