/* * SAS structures and definitions header file * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> * * This file is licensed under GPLv2. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA * */ #ifndef _SAS_H_ #define _SAS_H_ #include <linux/types.h> #include <asm/byteorder.h> #define SAS_ADDR_SIZE 8 #define HASHED_SAS_ADDR_SIZE 3 #define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa))) #define SMP_REQUEST 0x40 #define SMP_RESPONSE 0x41 #define SSP_DATA 0x01 #define SSP_XFER_RDY 0x05 #define SSP_COMMAND 0x06 #define SSP_RESPONSE 0x07 #define SSP_TASK 0x16 #define SMP_REPORT_GENERAL 0x00 #define SMP_REPORT_MANUF_INFO 0x01 #define SMP_READ_GPIO_REG 0x02 #define SMP_DISCOVER 0x10 #define SMP_REPORT_PHY_ERR_LOG 0x11 #define SMP_REPORT_PHY_SATA 0x12 #define SMP_REPORT_ROUTE_INFO 0x13 #define SMP_WRITE_GPIO_REG 0x82 #define SMP_CONF_ROUTE_INFO 0x90 #define SMP_PHY_CONTROL 0x91 #define SMP_PHY_TEST_FUNCTION 0x92 #define SMP_RESP_FUNC_ACC 0x00 #define SMP_RESP_FUNC_UNK 0x01 #define SMP_RESP_FUNC_FAILED 0x02 #define SMP_RESP_INV_FRM_LEN 0x03 #define SMP_RESP_NO_PHY 0x10 #define SMP_RESP_NO_INDEX 0x11 #define SMP_RESP_PHY_NO_SATA 0x12 #define SMP_RESP_PHY_UNK_OP 0x13 #define SMP_RESP_PHY_UNK_TESTF 0x14 #define SMP_RESP_PHY_TEST_INPROG 0x15 #define SMP_RESP_PHY_VACANT 0x16 /* SAM TMFs */ #define TMF_ABORT_TASK 0x01 #define TMF_ABORT_TASK_SET 0x02 #define TMF_CLEAR_TASK_SET 0x04 #define TMF_LU_RESET 0x08 #define TMF_CLEAR_ACA 0x40 #define TMF_QUERY_TASK 0x80 /* SAS TMF responses */ #define TMF_RESP_FUNC_COMPLETE 0x00 #define TMF_RESP_INVALID_FRAME 0x02 #define TMF_RESP_FUNC_ESUPP 0x04 #define TMF_RESP_FUNC_FAILED 0x05 #define TMF_RESP_FUNC_SUCC 0x08 #define TMF_RESP_NO_LUN 0x09 #define TMF_RESP_OVERLAPPED_TAG 0x0A enum sas_oob_mode { OOB_NOT_CONNECTED, SATA_OOB_MODE, SAS_OOB_MODE }; /* See sas_discover.c if you plan on changing these. */ enum sas_dev_type { NO_DEVICE = 0, /* protocol */ SAS_END_DEV = 1, /* protocol */ EDGE_DEV = 2, /* protocol */ FANOUT_DEV = 3, /* protocol */ SAS_HA = 4, SATA_DEV = 5, SATA_PM = 7, SATA_PM_PORT= 8, }; /* Partly from IDENTIFY address frame. */ enum sas_proto { SATA_PROTO = 1, SAS_PROTO_SMP = 2, /* protocol */ SAS_PROTO_STP = 4, /* protocol */ SAS_PROTO_SSP = 8, /* protocol */ SAS_PROTO_ALL = 0xE, }; /* From the spec; local phys only */ enum phy_func { PHY_FUNC_NOP, PHY_FUNC_LINK_RESET, /* Enables the phy */ PHY_FUNC_HARD_RESET, PHY_FUNC_DISABLE, PHY_FUNC_CLEAR_ERROR_LOG = 5, PHY_FUNC_CLEAR_AFFIL, PHY_FUNC_TX_SATA_PS_SIGNAL, PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */ PHY_FUNC_SET_LINK_RATE, }; /* SAS LLDD would need to report only _very_few_ of those, like BROADCAST. * Most of those are here for completeness. */ enum sas_prim { SAS_PRIM_AIP_NORMAL = 1, SAS_PRIM_AIP_R0 = 2, SAS_PRIM_AIP_R1 = 3, SAS_PRIM_AIP_R2 = 4, SAS_PRIM_AIP_WC = 5, SAS_PRIM_AIP_WD = 6, SAS_PRIM_AIP_WP = 7, SAS_PRIM_AIP_RWP = 8, SAS_PRIM_BC_CH = 9, SAS_PRIM_BC_RCH0 = 10, SAS_PRIM_BC_RCH1 = 11, SAS_PRIM_BC_R0 = 12, SAS_PRIM_BC_R1 = 13, SAS_PRIM_BC_R2 = 14, SAS_PRIM_BC_R3 = 15, SAS_PRIM_BC_R4 = 16, SAS_PRIM_NOTIFY_ENSP= 17, SAS_PRIM_NOTIFY_R0 = 18, SAS_PRIM_NOTIFY_R1 = 19, SAS_PRIM_NOTIFY_R2 = 20, SAS_PRIM_CLOSE_CLAF = 21, SAS_PRIM_CLOSE_NORM = 22, SAS_PRIM_CLOSE_R0 = 23, SAS_PRIM_CLOSE_R1 = 24, SAS_PRIM_OPEN_RTRY = 25, SAS_PRIM_OPEN_RJCT = 26, SAS_PRIM_OPEN_ACPT = 27, SAS_PRIM_DONE = 28, SAS_PRIM_BREAK = 29, SATA_PRIM_DMAT = 33, SATA_PRIM_PMNAK = 34, SATA_PRIM_PMACK = 35, SATA_PRIM_PMREQ_S = 36, SATA_PRIM_PMREQ_P = 37, SATA_SATA_R_ERR = 38, }; enum sas_open_rej_reason { /* Abandon open */ SAS_OREJ_UNKNOWN = 0, SAS_OREJ_BAD_DEST = 1, SAS_OREJ_CONN_RATE = 2, SAS_OREJ_EPROTO = 3, SAS_OREJ_RESV_AB0 = 4, SAS_OREJ_RESV_AB1 = 5, SAS_OREJ_RESV_AB2 = 6, SAS_OREJ_RESV_AB3 = 7, SAS_OREJ_WRONG_DEST= 8, SAS_OREJ_STP_NORES = 9, /* Retry open */ SAS_OREJ_NO_DEST = 10, SAS_OREJ_PATH_BLOCKED = 11, SAS_OREJ_RSVD_CONT0 = 12, SAS_OREJ_RSVD_CONT1 = 13, SAS_OREJ_RSVD_INIT0 = 14, SAS_OREJ_RSVD_INIT1 = 15, SAS_OREJ_RSVD_STOP0 = 16, SAS_OREJ_RSVD_STOP1 = 17, SAS_OREJ_RSVD_RETRY = 18, }; struct dev_to_host_fis { u8 fis_type; /* 0x34 */ u8 flags; u8 status; u8 error; u8 lbal; union { u8 lbam; u8 byte_count_low; }; union { u8 lbah; u8 byte_count_high; }; u8 device; u8 lbal_exp; u8 lbam_exp; u8 lbah_exp; u8 _r_a; union { u8 sector_count; u8 interrupt_reason; }; u8 sector_count_exp; u8 _r_b; u8 _r_c; u32 _r_d; } __attribute__ ((packed)); struct host_to_dev_fis { u8 fis_type; /* 0x27 */ u8 flags; u8 command; u8 features; u8 lbal; union { u8 lbam; u8 byte_count_low; }; union { u8 lbah; u8 byte_count_high; }; u8 device; u8 lbal_exp; u8 lbam_exp; u8 lbah_exp; u8 features_exp; union { u8 sector_count; u8 interrupt_reason; }; u8 sector_count_exp; u8 _r_a; u8 control; u32 _r_b; } __attribute__ ((packed)); /* Prefer to have code clarity over header file clarity. */ #ifdef __LITTLE_ENDIAN_BITFIELD struct sas_identify_frame { /* Byte 0 */ u8 frame_type:4; u8 dev_type:3; u8 _un0:1; /* Byte 1 */ u8 _un1; /* Byte 2 */ union { struct { u8 _un20:1; u8 smp_iport:1; u8 stp_iport:1; u8 ssp_iport:1; u8 _un247:4; }; u8 initiator_bits; }; /* Byte 3 */ union { struct { u8 _un30:1; u8 smp_tport:1; u8 stp_tport:1; u8 ssp_tport:1; u8 _un347:4; }; u8 target_bits; }; /* Byte 4 - 11 */ u8 _un4_11[8]; /* Byte 12 - 19 */ u8 sas_addr[SAS_ADDR_SIZE]; /* Byte 20 */ u8 phy_id; u8 _un21_27[7]; __be32 crc; } __attribute__ ((packed)); struct ssp_frame_hdr { u8 frame_type; u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE]; u8 _r_a; u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE]; __be16 _r_b; u8 changing_data_ptr:1; u8 retransmit:1; u8 retry_data_frames:1; u8 _r_c:5; u8 num_fill_bytes:2; u8 _r_d:6; u32 _r_e; __be16 tag; __be16 tptt; __be32 data_offs; } __attribute__ ((packed)); struct ssp_response_iu { u8 _r_a[10]; u8 datapres:2; u8 _r_b:6; u8 status; u32 _r_c; __be32 sense_data_len; __be32 response_data_len; u8 resp_data[0]; u8 sense_data[0]; } __attribute__ ((packed)); /* ---------- SMP ---------- */ struct report_general_resp { __be16 change_count; __be16 route_indexes; u8 _r_a; u8 num_phys; u8 conf_route_table:1; u8 configuring:1; u8 _r_b:6; u8 _r_c; u8 enclosure_logical_id[8]; u8 _r_d[12]; } __attribute__ ((packed)); struct discover_resp { u8 _r_a[5]; u8 phy_id; __be16 _r_b; u8 _r_c:4; u8 attached_dev_type:3; u8 _r_d:1; u8 linkrate:4; u8 _r_e:4; u8 attached_sata_host:1; u8 iproto:3; u8 _r_f:4; u8 attached_sata_dev:1; u8 tproto:3; u8 _r_g:3; u8 attached_sata_ps:1; u8 sas_addr[8]; u8 attached_sas_addr[8]; u8 attached_phy_id; u8 _r_h[7]; u8 hmin_linkrate:4; u8 pmin_linkrate:4; u8 hmax_linkrate:4; u8 pmax_linkrate:4; u8 change_count; u8 pptv:4; u8 _r_i:3; u8 virtual:1; u8 routing_attr:4; u8 _r_j:4; u8 conn_type; u8 conn_el_index; u8 conn_phy_link; u8 _r_k[8]; } __attribute__ ((packed)); struct report_phy_sata_resp { u8 _r_a[5]; u8 phy_id; u8 _r_b; u8 affil_valid:1; u8 affil_supp:1; u8 _r_c:6; u32 _r_d; u8 stp_sas_addr[8]; struct dev_to_host_fis fis; u32 _r_e; u8 affil_stp_ini_addr[8]; __be32 crc; } __attribute__ ((packed)); struct smp_resp { u8 frame_type; u8 function; u8 result; u8 reserved; union { struct report_general_resp rg; struct discover_resp disc; struct report_phy_sata_resp rps; }; } __attribute__ ((packed)); #elif defined(__BIG_ENDIAN_BITFIELD) struct sas_identify_frame { /* Byte 0 */ u8 _un0:1; u8 dev_type:3; u8 frame_type:4; /* Byte 1 */ u8 _un1; /* Byte 2 */ union { struct { u8 _un247:4; u8 ssp_iport:1; u8 stp_iport:1; u8 smp_iport:1; u8 _un20:1; }; u8 initiator_bits; }; /* Byte 3 */ union { struct { u8 _un347:4; u8 ssp_tport:1; u8 stp_tport:1; u8 smp_tport:1; u8 _un30:1; }; u8 target_bits; }; /* Byte 4 - 11 */ u8 _un4_11[8]; /* Byte 12 - 19 */ u8 sas_addr[SAS_ADDR_SIZE]; /* Byte 20 */ u8 phy_id; u8 _un21_27[7]; __be32 crc; } __attribute__ ((packed)); struct ssp_frame_hdr { u8 frame_type; u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE]; u8 _r_a; u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE]; __be16 _r_b; u8 _r_c:5; u8 retry_data_frames:1; u8 retransmit:1; u8 changing_data_ptr:1; u8 _r_d:6; u8 num_fill_bytes:2; u32 _r_e; __be16 tag; __be16 tptt; __be32 data_offs; } __attribute__ ((packed)); struct ssp_response_iu { u8 _r_a[10]; u8 _r_b:6; u8 datapres:2; u8 status; u32 _r_c; __be32 sense_data_len; __be32 response_data_len; u8 resp_data[0]; u8 sense_data[0]; } __attribute__ ((packed)); /* ---------- SMP ---------- */ struct report_general_resp { __be16 change_count; __be16 route_indexes; u8 _r_a; u8 num_phys; u8 _r_b:6; u8 configuring:1; u8 conf_route_table:1; u8 _r_c; u8 enclosure_logical_id[8]; u8 _r_d[12]; } __attribute__ ((packed)); struct discover_resp { u8 _r_a[5]; u8 phy_id; __be16 _r_b; u8 _r_d:1; u8 attached_dev_type:3; u8 _r_c:4; u8 _r_e:4; u8 linkrate:4; u8 _r_f:4; u8 iproto:3; u8 attached_sata_host:1; u8 attached_sata_ps:1; u8 _r_g:3; u8 tproto:3; u8 attached_sata_dev:1; u8 sas_addr[8]; u8 attached_sas_addr[8]; u8 attached_phy_id; u8 _r_h[7]; u8 pmin_linkrate:4; u8 hmin_linkrate:4; u8 pmax_linkrate:4; u8 hmax_linkrate:4; u8 change_count; u8 virtual:1; u8 _r_i:3; u8 pptv:4; u8 _r_j:4; u8 routing_attr:4; u8 conn_type; u8 conn_el_index; u8 conn_phy_link; u8 _r_k[8]; } __attribute__ ((packed)); struct report_phy_sata_resp { u8 _r_a[5]; u8 phy_id; u8 _r_b; u8 _r_c:6; u8 affil_supp:1; u8 affil_valid:1; u32 _r_d; u8 stp_sas_addr[8]; struct dev_to_host_fis fis; u32 _r_e; u8 affil_stp_ini_addr[8]; __be32 crc; } __attribute__ ((packed)); struct smp_resp { u8 frame_type; u8 function; u8 result; u8 reserved; union { struct report_general_resp rg; struct discover_resp disc; struct report_phy_sata_resp rps; }; } __attribute__ ((packed)); #else #error "Bitfield order not defined!" #endif #endif /* _SAS_H_ */