/* * usb-serial driver for Quatech SSU-100 * * based on ftdi_sio.c and the original serqt_usb.c from Quatech * */ #include #include #include #include #include #include #include #include #include #include #include #include #define QT_OPEN_CLOSE_CHANNEL 0xca #define QT_SET_GET_DEVICE 0xc2 #define QT_SET_GET_REGISTER 0xc0 #define QT_GET_SET_PREBUF_TRIG_LVL 0xcc #define QT_SET_ATF 0xcd #define QT_GET_SET_UART 0xc1 #define QT_TRANSFER_IN 0xc0 #define QT_HW_FLOW_CONTROL_MASK 0xc5 #define QT_SW_FLOW_CONTROL_MASK 0xc6 #define SERIAL_MSR_MASK 0xf0 #define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) #define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) #define MAX_BAUD_RATE 460800 #define ATC_DISABLED 0x00 #define DUPMODE_BITS 0xc0 #define RR_BITS 0x03 #define LOOPMODE_BITS 0x41 #define RS232_MODE 0x00 #define RTSCTS_TO_CONNECTOR 0x40 #define CLKS_X4 0x02 #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" #define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ #define QUATECH_SSU100 0xC020 /* SSU100 */ static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); struct ssu100_port_private { spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ struct async_icount icount; }; static inline int ssu100_control_msg(struct usb_device *dev, u8 request, u16 data, u16 index) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, 0x40, data, index, NULL, 0, 300); } static inline int ssu100_setdevice(struct usb_device *dev, u8 *data) { u16 x = ((u16)(data[1] << 8) | (u16)(data[0])); return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0); } static inline int ssu100_getdevice(struct usb_device *dev, u8 *data) { return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), QT_SET_GET_DEVICE, 0xc0, 0, 0, data, 3, 300); } static inline int ssu100_getregister(struct usb_device *dev, unsigned short uart, unsigned short reg, u8 *data) { return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), QT_SET_GET_REGISTER, 0xc0, reg, uart, data, sizeof(*data), 300); } static inline int ssu100_setregister(struct usb_device *dev, unsigned short uart, unsigned short reg, u16 data) { u16 value = (data << 8) | reg; return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), QT_SET_GET_REGISTER, 0x40, value, uart, NULL, 0, 300); } #define set_mctrl(dev, set) update_mctrl((dev), (set), 0) #define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear)) /* these do not deal with device that have more than 1 port */ static inline int update_mctrl(struct usb_device *dev, unsigned int set, unsigned int clear) { unsigned urb_value; int result; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (set & TIOCM_DTR) urb_value |= UART_MCR_DTR; if (set & TIOCM_RTS) urb_value |= UART_MCR_RTS; result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__); return result; } static int ssu100_initdevice(struct usb_device *dev) { u8 *data; int result = 0; data = kzalloc(3, GFP_KERNEL); if (!data) return -ENOMEM; result = ssu100_getdevice(dev, data); if (result < 0) { dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } data[1] &= ~FULLPWRBIT; result = ssu100_setdevice(dev, data); if (result < 0) { dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); if (result < 0) { dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); if (result < 0) { dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_getdevice(dev, data); if (result < 0) { dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } data[0] &= ~(RR_BITS | DUPMODE_BITS); data[0] |= CLKS_X4; data[1] &= ~(LOOPMODE_BITS); data[1] |= RS232_MODE; result = ssu100_setdevice(dev, data); if (result < 0) { dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } out: kfree(data); return result; } static void ssu100_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_device *dev = port->serial->dev; struct ktermios *termios = &tty->termios; u16 baud, divisor, remainder; unsigned int cflag = termios->c_cflag; u16 urb_value = 0; /* will hold the new flags */ int result; if (cflag & PARENB) { if (cflag & PARODD) urb_value |= UART_LCR_PARITY; else urb_value |= SERIAL_EVEN_PARITY; } switch (cflag & CSIZE) { case CS5: urb_value |= UART_LCR_WLEN5; break; case CS6: urb_value |= UART_LCR_WLEN6; break; case CS7: urb_value |= UART_LCR_WLEN7; break; default: case CS8: urb_value |= UART_LCR_WLEN8; break; } baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); divisor = MAX_BAUD_RATE / baud; remainder = MAX_BAUD_RATE % baud; if (((remainder * 2) >= baud) && (baud != 110)) divisor++; urb_value = urb_value << 8; result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); if (result < 0) dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (cflag & CRTSCTS) result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, SERIAL_CRTSCTS, 0); else result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, 0, 0); if (result < 0) dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__); if (I_IXOFF(tty) || I_IXON(tty)) { u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, x, 0); } else result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, 0, 0); if (result < 0) dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__); } static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_device *dev = port->serial->dev; struct ssu100_port_private *priv = usb_get_serial_port_data(port); u8 *data; int result; unsigned long flags; data = kzalloc(2, GFP_KERNEL); if (!data) return -ENOMEM; result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), QT_OPEN_CLOSE_CHANNEL, QT_TRANSFER_IN, 0x01, 0, data, 2, 300); if (result < 0) { dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result); kfree(data); return result; } spin_lock_irqsave(&priv->status_lock, flags); priv->shadowLSR = data[0]; priv->shadowMSR = data[1]; spin_unlock_irqrestore(&priv->status_lock, flags); kfree(data); /* set to 9600 */ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); if (result < 0) dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (tty) ssu100_set_termios(tty, port, &tty->termios); return usb_serial_generic_open(tty, port); } static void ssu100_close(struct usb_serial_port *port) { usb_serial_generic_close(port); } static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) { struct serial_struct tmp; if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); tmp.line = port->serial->minor; tmp.port = 0; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = port->bulk_out_size; tmp.baud_base = 9600; tmp.close_delay = 5*HZ; tmp.closing_wait = 30*HZ; if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; return 0; } static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct ssu100_port_private *priv = usb_get_serial_port_data(port); struct async_icount prev, cur; unsigned long flags; spin_lock_irqsave(&priv->status_lock, flags); prev = priv->icount; spin_unlock_irqrestore(&priv->status_lock, flags); while (1) { wait_event_interruptible(priv->delta_msr_wait, ((priv->icount.rng != prev.rng) || (priv->icount.dsr != prev.dsr) || (priv->icount.dcd != prev.dcd) || (priv->icount.cts != prev.cts))); if (signal_pending(current)) return -ERESTARTSYS; spin_lock_irqsave(&priv->status_lock, flags); cur = priv->icount; spin_unlock_irqrestore(&priv->status_lock, flags); if ((prev.rng == cur.rng) && (prev.dsr == cur.dsr) && (prev.dcd == cur.dcd) && (prev.cts == cur.cts)) return -EIO; if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || (arg & TIOCM_CTS && (prev.cts != cur.cts))) return 0; } return 0; } static int ssu100_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount) { struct usb_serial_port *port = tty->driver_data; struct ssu100_port_private *priv = usb_get_serial_port_data(port); struct async_icount cnow = priv->icount; icount->cts = cnow.cts; icount->dsr = cnow.dsr; icount->rng = cnow.rng; icount->dcd = cnow.dcd; icount->rx = cnow.rx; icount->tx = cnow.tx; icount->frame = cnow.frame; icount->overrun = cnow.overrun; icount->parity = cnow.parity; icount->brk = cnow.brk; icount->buf_overrun = cnow.buf_overrun; return 0; } static int ssu100_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: return get_serial_info(port, (struct serial_struct __user *) arg); case TIOCMIWAIT: return wait_modem_info(port, arg); default: break; } dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } static int ssu100_attach(struct usb_serial *serial) { return ssu100_initdevice(serial->dev); } static int ssu100_port_probe(struct usb_serial_port *port) { struct ssu100_port_private *priv; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; spin_lock_init(&priv->status_lock); init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); return 0; } static int ssu100_port_remove(struct usb_serial_port *port) { struct ssu100_port_private *priv; priv = usb_get_serial_port_data(port); kfree(priv); return 0; } static int ssu100_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct usb_device *dev = port->serial->dev; u8 *d; int r; d = kzalloc(2, GFP_KERNEL); if (!d) return -ENOMEM; r = ssu100_getregister(dev, 0, UART_MCR, d); if (r < 0) goto mget_out; r = ssu100_getregister(dev, 0, UART_MSR, d+1); if (r < 0) goto mget_out; r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); mget_out: kfree(d); return r; } static int ssu100_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct usb_device *dev = port->serial->dev; return update_mctrl(dev, set, clear); } static void ssu100_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* Disable flow control */ if (!on && ssu100_setregister(dev, 0, UART_MCR, 0) < 0) dev_err(&port->dev, "error from flowcontrol urb\n"); /* drop RTS and DTR */ if (on) set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); else clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); } mutex_unlock(&port->serial->disc_mutex); } static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) { struct ssu100_port_private *priv = usb_get_serial_port_data(port); unsigned long flags; spin_lock_irqsave(&priv->status_lock, flags); priv->shadowMSR = msr; spin_unlock_irqrestore(&priv->status_lock, flags); if (msr & UART_MSR_ANY_DELTA) { /* update input line counters */ if (msr & UART_MSR_DCTS) priv->icount.cts++; if (msr & UART_MSR_DDSR) priv->icount.dsr++; if (msr & UART_MSR_DDCD) priv->icount.dcd++; if (msr & UART_MSR_TERI) priv->icount.rng++; wake_up_interruptible(&priv->delta_msr_wait); } } static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, char *tty_flag) { struct ssu100_port_private *priv = usb_get_serial_port_data(port); unsigned long flags; spin_lock_irqsave(&priv->status_lock, flags); priv->shadowLSR = lsr; spin_unlock_irqrestore(&priv->status_lock, flags); *tty_flag = TTY_NORMAL; if (lsr & UART_LSR_BRK_ERROR_BITS) { /* we always want to update icount, but we only want to * update tty_flag for one case */ if (lsr & UART_LSR_BI) { priv->icount.brk++; *tty_flag = TTY_BREAK; usb_serial_handle_break(port); } if (lsr & UART_LSR_PE) { priv->icount.parity++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_PARITY; } if (lsr & UART_LSR_FE) { priv->icount.frame++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_FRAME; } if (lsr & UART_LSR_OE){ priv->icount.overrun++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_OVERRUN; } } } static void ssu100_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; char *packet = (char *)urb->transfer_buffer; char flag = TTY_NORMAL; u32 len = urb->actual_length; int i; char *ch; if ((len >= 4) && (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { if (packet[2] == 0x00) { ssu100_update_lsr(port, packet[3], &flag); if (flag == TTY_OVERRUN) tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } if (packet[2] == 0x01) ssu100_update_msr(port, packet[3]); len -= 4; ch = packet + 4; } else ch = packet; if (!len) return; /* status only */ if (port->port.console && port->sysrq) { for (i = 0; i < len; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) tty_insert_flip_char(&port->port, *ch, flag); } } else tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); tty_flip_buffer_push(&port->port); } static struct usb_serial_driver ssu100_device = { .driver = { .owner = THIS_MODULE, .name = "ssu100", }, .description = DRIVER_DESC, .id_table = id_table, .num_ports = 1, .open = ssu100_open, .close = ssu100_close, .attach = ssu100_attach, .port_probe = ssu100_port_probe, .port_remove = ssu100_port_remove, .dtr_rts = ssu100_dtr_rts, .process_read_urb = ssu100_process_read_urb, .tiocmget = ssu100_tiocmget, .tiocmset = ssu100_tiocmset, .get_icount = ssu100_get_icount, .ioctl = ssu100_ioctl, .set_termios = ssu100_set_termios, .disconnect = usb_serial_generic_disconnect, }; static struct usb_serial_driver * const serial_drivers[] = { &ssu100_device, NULL }; module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");