// SPDX-License-Identifier: GPL-2.0+ /* * *************************************************************************** * Marvell Armada-3700 Serial Driver * Author: Wilson Ding * Copyright (C) 2015 Marvell International Ltd. * *************************************************************************** * This program is free software: you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, either version 2 of the License, or any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * *************************************************************************** */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Register Map */ #define UART_STD_RBR 0x00 #define UART_EXT_RBR 0x18 #define UART_STD_TSH 0x04 #define UART_EXT_TSH 0x1C #define UART_STD_CTRL1 0x08 #define UART_EXT_CTRL1 0x04 #define CTRL_SOFT_RST BIT(31) #define CTRL_TXFIFO_RST BIT(15) #define CTRL_RXFIFO_RST BIT(14) #define CTRL_SND_BRK_SEQ BIT(11) #define CTRL_BRK_DET_INT BIT(3) #define CTRL_FRM_ERR_INT BIT(2) #define CTRL_PAR_ERR_INT BIT(1) #define CTRL_OVR_ERR_INT BIT(0) #define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \ CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT) #define UART_STD_CTRL2 UART_STD_CTRL1 #define UART_EXT_CTRL2 0x20 #define CTRL_STD_TX_RDY_INT BIT(5) #define CTRL_EXT_TX_RDY_INT BIT(6) #define CTRL_STD_RX_RDY_INT BIT(4) #define CTRL_EXT_RX_RDY_INT BIT(5) #define UART_STAT 0x0C #define STAT_TX_FIFO_EMP BIT(13) #define STAT_TX_FIFO_FUL BIT(11) #define STAT_TX_EMP BIT(6) #define STAT_STD_TX_RDY BIT(5) #define STAT_EXT_TX_RDY BIT(15) #define STAT_STD_RX_RDY BIT(4) #define STAT_EXT_RX_RDY BIT(14) #define STAT_BRK_DET BIT(3) #define STAT_FRM_ERR BIT(2) #define STAT_PAR_ERR BIT(1) #define STAT_OVR_ERR BIT(0) #define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR | STAT_FRM_ERR\ | STAT_PAR_ERR | STAT_OVR_ERR) #define UART_BRDV 0x10 #define BRDV_BAUD_MASK 0x3FF #define MVEBU_NR_UARTS 2 #define MVEBU_UART_TYPE "mvebu-uart" #define DRIVER_NAME "mvebu_serial" enum { /* Either there is only one summed IRQ... */ UART_IRQ_SUM = 0, /* ...or there are two separate IRQ for RX and TX */ UART_RX_IRQ = 0, UART_TX_IRQ, UART_IRQ_COUNT }; /* Diverging register offsets */ struct uart_regs_layout { unsigned int rbr; unsigned int tsh; unsigned int ctrl; unsigned int intr; }; /* Diverging flags */ struct uart_flags { unsigned int ctrl_tx_rdy_int; unsigned int ctrl_rx_rdy_int; unsigned int stat_tx_rdy; unsigned int stat_rx_rdy; }; /* Driver data, a structure for each UART port */ struct mvebu_uart_driver_data { bool is_ext; struct uart_regs_layout regs; struct uart_flags flags; }; /* MVEBU UART driver structure */ struct mvebu_uart { struct uart_port *port; struct clk *clk; int irq[UART_IRQ_COUNT]; unsigned char __iomem *nb; struct mvebu_uart_driver_data *data; }; static struct mvebu_uart *to_mvuart(struct uart_port *port) { return (struct mvebu_uart *)port->private_data; } #define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext) #define UART_RBR(port) (to_mvuart(port)->data->regs.rbr) #define UART_TSH(port) (to_mvuart(port)->data->regs.tsh) #define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl) #define UART_INTR(port) (to_mvuart(port)->data->regs.intr) #define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int) #define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int) #define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy) #define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy) static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS]; /* Core UART Driver Operations */ static unsigned int mvebu_uart_tx_empty(struct uart_port *port) { unsigned long flags; unsigned int st; spin_lock_irqsave(&port->lock, flags); st = readl(port->membase + UART_STAT); spin_unlock_irqrestore(&port->lock, flags); return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0; } static unsigned int mvebu_uart_get_mctrl(struct uart_port *port) { return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; } static void mvebu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { /* * Even if we do not support configuring the modem control lines, this * function must be proided to the serial core */ } static void mvebu_uart_stop_tx(struct uart_port *port) { unsigned int ctl = readl(port->membase + UART_INTR(port)); ctl &= ~CTRL_TX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_start_tx(struct uart_port *port) { unsigned int ctl; struct circ_buf *xmit = &port->state->xmit; if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) { writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; } ctl = readl(port->membase + UART_INTR(port)); ctl |= CTRL_TX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_stop_rx(struct uart_port *port) { unsigned int ctl; ctl = readl(port->membase + UART_CTRL(port)); ctl &= ~CTRL_BRK_INT; writel(ctl, port->membase + UART_CTRL(port)); ctl = readl(port->membase + UART_INTR(port)); ctl &= ~CTRL_RX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); } static void mvebu_uart_break_ctl(struct uart_port *port, int brk) { unsigned int ctl; unsigned long flags; spin_lock_irqsave(&port->lock, flags); ctl = readl(port->membase + UART_CTRL(port)); if (brk == -1) ctl |= CTRL_SND_BRK_SEQ; else ctl &= ~CTRL_SND_BRK_SEQ; writel(ctl, port->membase + UART_CTRL(port)); spin_unlock_irqrestore(&port->lock, flags); } static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status) { struct tty_port *tport = &port->state->port; unsigned char ch = 0; char flag = 0; do { if (status & STAT_RX_RDY(port)) { ch = readl(port->membase + UART_RBR(port)); ch &= 0xff; flag = TTY_NORMAL; port->icount.rx++; if (status & STAT_PAR_ERR) port->icount.parity++; } if (status & STAT_BRK_DET) { port->icount.brk++; status &= ~(STAT_FRM_ERR | STAT_PAR_ERR); if (uart_handle_break(port)) goto ignore_char; } if (status & STAT_OVR_ERR) port->icount.overrun++; if (status & STAT_FRM_ERR) port->icount.frame++; if (uart_handle_sysrq_char(port, ch)) goto ignore_char; if (status & port->ignore_status_mask & STAT_PAR_ERR) status &= ~STAT_RX_RDY(port); status &= port->read_status_mask; if (status & STAT_PAR_ERR) flag = TTY_PARITY; status &= ~port->ignore_status_mask; if (status & STAT_RX_RDY(port)) tty_insert_flip_char(tport, ch, flag); if (status & STAT_BRK_DET) tty_insert_flip_char(tport, 0, TTY_BREAK); if (status & STAT_FRM_ERR) tty_insert_flip_char(tport, 0, TTY_FRAME); if (status & STAT_OVR_ERR) tty_insert_flip_char(tport, 0, TTY_OVERRUN); ignore_char: status = readl(port->membase + UART_STAT); } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET)); tty_flip_buffer_push(tport); } static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status) { struct circ_buf *xmit = &port->state->xmit; unsigned int count; unsigned int st; if (port->x_char) { writel(port->x_char, port->membase + UART_TSH(port)); port->icount.tx++; port->x_char = 0; return; } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { mvebu_uart_stop_tx(port); return; } for (count = 0; count < port->fifosize; count++) { writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port)); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; if (uart_circ_empty(xmit)) break; st = readl(port->membase + UART_STAT); if (st & STAT_TX_FIFO_FUL) break; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (uart_circ_empty(xmit)) mvebu_uart_stop_tx(port); } static irqreturn_t mvebu_uart_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET)) mvebu_uart_rx_chars(port, st); if (st & STAT_TX_RDY(port)) mvebu_uart_tx_chars(port, st); return IRQ_HANDLED; } static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET)) mvebu_uart_rx_chars(port, st); return IRQ_HANDLED; } static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned int st = readl(port->membase + UART_STAT); if (st & STAT_TX_RDY(port)) mvebu_uart_tx_chars(port, st); return IRQ_HANDLED; } static int mvebu_uart_startup(struct uart_port *port) { struct mvebu_uart *mvuart = to_mvuart(port); unsigned int ctl; int ret; writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST, port->membase + UART_CTRL(port)); udelay(1); /* Clear the error bits of state register before IRQ request */ ret = readl(port->membase + UART_STAT); ret |= STAT_BRK_ERR; writel(ret, port->membase + UART_STAT); writel(CTRL_BRK_INT, port->membase + UART_CTRL(port)); ctl = readl(port->membase + UART_INTR(port)); ctl |= CTRL_RX_RDY_INT(port); writel(ctl, port->membase + UART_INTR(port)); if (!mvuart->irq[UART_TX_IRQ]) { /* Old bindings with just one interrupt (UART0 only) */ ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM], mvebu_uart_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_IRQ_SUM]); return ret; } } else { /* New bindings with an IRQ for RX and TX (both UART) */ ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ], mvebu_uart_rx_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_RX_IRQ]); return ret; } ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ], mvebu_uart_tx_isr, port->irqflags, dev_name(port->dev), port); if (ret) { dev_err(port->dev, "unable to request IRQ %d\n", mvuart->irq[UART_TX_IRQ]); devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); return ret; } } return 0; } static void mvebu_uart_shutdown(struct uart_port *port) { struct mvebu_uart *mvuart = to_mvuart(port); writel(0, port->membase + UART_INTR(port)); if (!mvuart->irq[UART_TX_IRQ]) { devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port); } else { devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port); devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port); } } static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud) { struct mvebu_uart *mvuart = to_mvuart(port); unsigned int baud_rate_div; u32 brdv; if (IS_ERR(mvuart->clk)) return -PTR_ERR(mvuart->clk); /* * The UART clock is divided by the value of the divisor to generate * UCLK_OUT clock, which is 16 times faster than the baudrate. * This prescaler can achieve all standard baudrates until 230400. * Higher baudrates could be achieved for the extended UART by using the * programmable oversampling stack (also called fractional divisor). */ baud_rate_div = DIV_ROUND_UP(port->uartclk, baud * 16); brdv = readl(port->membase + UART_BRDV); brdv &= ~BRDV_BAUD_MASK; brdv |= baud_rate_div; writel(brdv, port->membase + UART_BRDV); return 0; } static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; unsigned int baud; spin_lock_irqsave(&port->lock, flags); port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_TX_RDY(port) | STAT_TX_FIFO_FUL; if (termios->c_iflag & INPCK) port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR; port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR; if ((termios->c_cflag & CREAD) == 0) port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* * Maximum achievable frequency with simple baudrate divisor is 230400. * Since the error per bit frame would be of more than 15%, achieving * higher frequencies would require to implement the fractional divisor * feature. */ baud = uart_get_baud_rate(port, termios, old, 0, 230400); if (mvebu_uart_baud_rate_set(port, baud)) { /* No clock available, baudrate cannot be changed */ if (old) baud = uart_get_baud_rate(port, old, NULL, 0, 230400); } else { tty_termios_encode_baud_rate(termios, baud, baud); uart_update_timeout(port, termios->c_cflag, baud); } /* Only the following flag changes are supported */ if (old) { termios->c_iflag &= INPCK | IGNPAR; termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); termios->c_cflag &= CREAD | CBAUD; termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); termios->c_lflag = old->c_lflag; } spin_unlock_irqrestore(&port->lock, flags); } static const char *mvebu_uart_type(struct uart_port *port) { return MVEBU_UART_TYPE; } static void mvebu_uart_release_port(struct uart_port *port) { /* Nothing to do here */ } static int mvebu_uart_request_port(struct uart_port *port) { return 0; } #ifdef CONFIG_CONSOLE_POLL static int mvebu_uart_get_poll_char(struct uart_port *port) { unsigned int st = readl(port->membase + UART_STAT); if (!(st & STAT_RX_RDY(port))) return NO_POLL_CHAR; return readl(port->membase + UART_RBR(port)); } static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c) { unsigned int st; for (;;) { st = readl(port->membase + UART_STAT); if (!(st & STAT_TX_FIFO_FUL)) break; udelay(1); } writel(c, port->membase + UART_TSH(port)); } #endif static const struct uart_ops mvebu_uart_ops = { .tx_empty = mvebu_uart_tx_empty, .set_mctrl = mvebu_uart_set_mctrl, .get_mctrl = mvebu_uart_get_mctrl, .stop_tx = mvebu_uart_stop_tx, .start_tx = mvebu_uart_start_tx, .stop_rx = mvebu_uart_stop_rx, .break_ctl = mvebu_uart_break_ctl, .startup = mvebu_uart_startup, .shutdown = mvebu_uart_shutdown, .set_termios = mvebu_uart_set_termios, .type = mvebu_uart_type, .release_port = mvebu_uart_release_port, .request_port = mvebu_uart_request_port, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = mvebu_uart_get_poll_char, .poll_put_char = mvebu_uart_put_poll_char, #endif }; /* Console Driver Operations */ #ifdef CONFIG_SERIAL_MVEBU_CONSOLE /* Early Console */ static void mvebu_uart_putc(struct uart_port *port, int c) { unsigned int st; for (;;) { st = readl(port->membase + UART_STAT); if (!(st & STAT_TX_FIFO_FUL)) break; } /* At early stage, DT is not parsed yet, only use UART0 */ writel(c, port->membase + UART_STD_TSH); for (;;) { st = readl(port->membase + UART_STAT); if (st & STAT_TX_FIFO_EMP) break; } } static void mvebu_uart_putc_early_write(struct console *con, const char *s, unsigned n) { struct earlycon_device *dev = con->data; uart_console_write(&dev->port, s, n, mvebu_uart_putc); } static int __init mvebu_uart_early_console_setup(struct earlycon_device *device, const char *opt) { if (!device->port.membase) return -ENODEV; device->con->write = mvebu_uart_putc_early_write; return 0; } EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup); OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart", mvebu_uart_early_console_setup); static void wait_for_xmitr(struct uart_port *port) { u32 val; readl_poll_timeout_atomic(port->membase + UART_STAT, val, (val & STAT_TX_EMP), 1, 10000); } static void mvebu_uart_console_putchar(struct uart_port *port, int ch) { wait_for_xmitr(port); writel(ch, port->membase + UART_TSH(port)); } static void mvebu_uart_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *port = &mvebu_uart_ports[co->index]; unsigned long flags; unsigned int ier, intr, ctl; int locked = 1; if (oops_in_progress) locked = spin_trylock_irqsave(&port->lock, flags); else spin_lock_irqsave(&port->lock, flags); ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT; intr = readl(port->membase + UART_INTR(port)) & (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port)); writel(0, port->membase + UART_CTRL(port)); writel(0, port->membase + UART_INTR(port)); uart_console_write(port, s, count, mvebu_uart_console_putchar); wait_for_xmitr(port); if (ier) writel(ier, port->membase + UART_CTRL(port)); if (intr) { ctl = intr | readl(port->membase + UART_INTR(port)); writel(ctl, port->membase + UART_INTR(port)); } if (locked) spin_unlock_irqrestore(&port->lock, flags); } static int mvebu_uart_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; if (co->index < 0 || co->index >= MVEBU_NR_UARTS) return -EINVAL; port = &mvebu_uart_ports[co->index]; if (!port->mapbase || !port->membase) { pr_debug("console on ttyMV%i not present\n", co->index); return -ENODEV; } if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, co, baud, parity, bits, flow); } static struct uart_driver mvebu_uart_driver; static struct console mvebu_uart_console = { .name = "ttyMV", .write = mvebu_uart_console_write, .device = uart_console_device, .setup = mvebu_uart_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &mvebu_uart_driver, }; static int __init mvebu_uart_console_init(void) { register_console(&mvebu_uart_console); return 0; } console_initcall(mvebu_uart_console_init); #endif /* CONFIG_SERIAL_MVEBU_CONSOLE */ static struct uart_driver mvebu_uart_driver = { .owner = THIS_MODULE, .driver_name = DRIVER_NAME, .dev_name = "ttyMV", .nr = MVEBU_NR_UARTS, #ifdef CONFIG_SERIAL_MVEBU_CONSOLE .cons = &mvebu_uart_console, #endif }; static const struct of_device_id mvebu_uart_of_match[]; /* Counter to keep track of each UART port id when not using CONFIG_OF */ static int uart_num_counter; static int mvebu_uart_probe(struct platform_device *pdev) { struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); const struct of_device_id *match = of_match_device(mvebu_uart_of_match, &pdev->dev); struct uart_port *port; struct mvebu_uart *mvuart; int ret, id, irq; if (!reg) { dev_err(&pdev->dev, "no registers defined\n"); return -EINVAL; } /* Assume that all UART ports have a DT alias or none has */ id = of_alias_get_id(pdev->dev.of_node, "serial"); if (!pdev->dev.of_node || id < 0) pdev->id = uart_num_counter++; else pdev->id = id; if (pdev->id >= MVEBU_NR_UARTS) { dev_err(&pdev->dev, "cannot have more than %d UART ports\n", MVEBU_NR_UARTS); return -EINVAL; } port = &mvebu_uart_ports[pdev->id]; spin_lock_init(&port->lock); port->dev = &pdev->dev; port->type = PORT_MVEBU; port->ops = &mvebu_uart_ops; port->regshift = 0; port->fifosize = 32; port->iotype = UPIO_MEM32; port->flags = UPF_FIXED_PORT; port->line = pdev->id; /* * IRQ number is not stored in this structure because we may have two of * them per port (RX and TX). Instead, use the driver UART structure * array so called ->irq[]. */ port->irq = 0; port->irqflags = 0; port->mapbase = reg->start; port->membase = devm_ioremap_resource(&pdev->dev, reg); if (IS_ERR(port->membase)) return -PTR_ERR(port->membase); mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart), GFP_KERNEL); if (!mvuart) return -ENOMEM; /* Get controller data depending on the compatible string */ mvuart->data = (struct mvebu_uart_driver_data *)match->data; mvuart->port = port; port->private_data = mvuart; platform_set_drvdata(pdev, mvuart); /* Get fixed clock frequency */ mvuart->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(mvuart->clk)) { if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER) return PTR_ERR(mvuart->clk); if (IS_EXTENDED(port)) { dev_err(&pdev->dev, "unable to get UART clock\n"); return PTR_ERR(mvuart->clk); } } else { if (!clk_prepare_enable(mvuart->clk)) port->uartclk = clk_get_rate(mvuart->clk); } /* Manage interrupts */ if (platform_irq_count(pdev) == 1) { /* Old bindings: no name on the single unamed UART0 IRQ */ irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "unable to get UART IRQ\n"); return irq; } mvuart->irq[UART_IRQ_SUM] = irq; } else { /* * New bindings: named interrupts (RX, TX) for both UARTS, * only make use of uart-rx and uart-tx interrupts, do not use * uart-sum of UART0 port. */ irq = platform_get_irq_byname(pdev, "uart-rx"); if (irq < 0) { dev_err(&pdev->dev, "unable to get 'uart-rx' IRQ\n"); return irq; } mvuart->irq[UART_RX_IRQ] = irq; irq = platform_get_irq_byname(pdev, "uart-tx"); if (irq < 0) { dev_err(&pdev->dev, "unable to get 'uart-tx' IRQ\n"); return irq; } mvuart->irq[UART_TX_IRQ] = irq; } /* UART Soft Reset*/ writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port)); udelay(1); writel(0, port->membase + UART_CTRL(port)); ret = uart_add_one_port(&mvebu_uart_driver, port); if (ret) return ret; return 0; } static struct mvebu_uart_driver_data uart_std_driver_data = { .is_ext = false, .regs.rbr = UART_STD_RBR, .regs.tsh = UART_STD_TSH, .regs.ctrl = UART_STD_CTRL1, .regs.intr = UART_STD_CTRL2, .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT, .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT, .flags.stat_tx_rdy = STAT_STD_TX_RDY, .flags.stat_rx_rdy = STAT_STD_RX_RDY, }; static struct mvebu_uart_driver_data uart_ext_driver_data = { .is_ext = true, .regs.rbr = UART_EXT_RBR, .regs.tsh = UART_EXT_TSH, .regs.ctrl = UART_EXT_CTRL1, .regs.intr = UART_EXT_CTRL2, .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT, .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT, .flags.stat_tx_rdy = STAT_EXT_TX_RDY, .flags.stat_rx_rdy = STAT_EXT_RX_RDY, }; /* Match table for of_platform binding */ static const struct of_device_id mvebu_uart_of_match[] = { { .compatible = "marvell,armada-3700-uart", .data = (void *)&uart_std_driver_data, }, { .compatible = "marvell,armada-3700-uart-ext", .data = (void *)&uart_ext_driver_data, }, {} }; static struct platform_driver mvebu_uart_platform_driver = { .probe = mvebu_uart_probe, .driver = { .name = "mvebu-uart", .of_match_table = of_match_ptr(mvebu_uart_of_match), .suppress_bind_attrs = true, }, }; static int __init mvebu_uart_init(void) { int ret; ret = uart_register_driver(&mvebu_uart_driver); if (ret) return ret; ret = platform_driver_register(&mvebu_uart_platform_driver); if (ret) uart_unregister_driver(&mvebu_uart_driver); return ret; } arch_initcall(mvebu_uart_init);