// SPDX-License-Identifier: GPL-2.0-only /* * Designware SPI core controller driver (refer pxa2xx_spi.c) * * Copyright (c) 2009, Intel Corporation. */ #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/highmem.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include "spi-dw.h" #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> #endif /* Slave spi_dev related */ struct chip_data { u8 tmode; /* TR/TO/RO/EEPROM */ u8 type; /* SPI/SSP/MicroWire */ u8 poll_mode; /* 1 means use poll mode */ u16 clk_div; /* baud rate divider */ u32 speed_hz; /* baud rate */ void (*cs_control)(u32 command); }; #ifdef CONFIG_DEBUG_FS #define SPI_REGS_BUFSIZE 1024 static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { struct dw_spi *dws = file->private_data; char *buf; u32 len = 0; ssize_t ret; buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); if (!buf) return 0; len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "%s registers:\n", dev_name(&dws->master->dev)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR)); len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len, "=================================\n"); ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); kfree(buf); return ret; } static const struct file_operations dw_spi_regs_ops = { .owner = THIS_MODULE, .open = simple_open, .read = dw_spi_show_regs, .llseek = default_llseek, }; static int dw_spi_debugfs_init(struct dw_spi *dws) { char name[32]; snprintf(name, 32, "dw_spi%d", dws->master->bus_num); dws->debugfs = debugfs_create_dir(name, NULL); if (!dws->debugfs) return -ENOMEM; debugfs_create_file("registers", S_IFREG | S_IRUGO, dws->debugfs, (void *)dws, &dw_spi_regs_ops); return 0; } static void dw_spi_debugfs_remove(struct dw_spi *dws) { debugfs_remove_recursive(dws->debugfs); } #else static inline int dw_spi_debugfs_init(struct dw_spi *dws) { return 0; } static inline void dw_spi_debugfs_remove(struct dw_spi *dws) { } #endif /* CONFIG_DEBUG_FS */ void dw_spi_set_cs(struct spi_device *spi, bool enable) { struct dw_spi *dws = spi_controller_get_devdata(spi->controller); struct chip_data *chip = spi_get_ctldata(spi); if (chip && chip->cs_control) chip->cs_control(enable); if (enable) dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select)); else if (dws->cs_override) dw_writel(dws, DW_SPI_SER, 0); } EXPORT_SYMBOL_GPL(dw_spi_set_cs); /* Return the max entries we can fill into tx fifo */ static inline u32 tx_max(struct dw_spi *dws) { u32 tx_left, tx_room, rxtx_gap; tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR); /* * Another concern is about the tx/rx mismatch, we * though to use (dws->fifo_len - rxflr - txflr) as * one maximum value for tx, but it doesn't cover the * data which is out of tx/rx fifo and inside the * shift registers. So a control from sw point of * view is taken. */ rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx)) / dws->n_bytes; return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap)); } /* Return the max entries we should read out of rx fifo */ static inline u32 rx_max(struct dw_spi *dws) { u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; return min_t(u32, rx_left, dw_readl(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) { u32 max = tx_max(dws); u16 txw = 0; while (max--) { /* Set the tx word if the transfer's original "tx" is not null */ if (dws->tx_end - dws->len) { if (dws->n_bytes == 1) txw = *(u8 *)(dws->tx); else txw = *(u16 *)(dws->tx); } dw_write_io_reg(dws, DW_SPI_DR, txw); dws->tx += dws->n_bytes; } } static void dw_reader(struct dw_spi *dws) { u32 max = rx_max(dws); u16 rxw; while (max--) { rxw = dw_read_io_reg(dws, DW_SPI_DR); /* Care rx only if the transfer's original "rx" is not null */ if (dws->rx_end - dws->len) { if (dws->n_bytes == 1) *(u8 *)(dws->rx) = rxw; else *(u16 *)(dws->rx) = rxw; } dws->rx += dws->n_bytes; } } static void int_error_stop(struct dw_spi *dws, const char *msg) { spi_reset_chip(dws); dev_err(&dws->master->dev, "%s\n", msg); dws->master->cur_msg->status = -EIO; spi_finalize_current_transfer(dws->master); } static irqreturn_t interrupt_transfer(struct dw_spi *dws) { u16 irq_status = dw_readl(dws, DW_SPI_ISR); /* Error handling */ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { dw_readl(dws, DW_SPI_ICR); int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); return IRQ_HANDLED; } dw_reader(dws); if (dws->rx_end == dws->rx) { spi_mask_intr(dws, SPI_INT_TXEI); spi_finalize_current_transfer(dws->master); return IRQ_HANDLED; } if (irq_status & SPI_INT_TXEI) { spi_mask_intr(dws, SPI_INT_TXEI); dw_writer(dws); /* Enable TX irq always, it will be disabled when RX finished */ spi_umask_intr(dws, SPI_INT_TXEI); } return IRQ_HANDLED; } static irqreturn_t dw_spi_irq(int irq, void *dev_id) { struct spi_controller *master = dev_id; struct dw_spi *dws = spi_controller_get_devdata(master); u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f; if (!irq_status) return IRQ_NONE; if (!master->cur_msg) { spi_mask_intr(dws, SPI_INT_TXEI); return IRQ_HANDLED; } return dws->transfer_handler(dws); } /* Must be called inside pump_transfers() */ static int poll_transfer(struct dw_spi *dws) { do { dw_writer(dws); dw_reader(dws); cpu_relax(); } while (dws->rx_end > dws->rx); return 0; } static int dw_spi_transfer_one(struct spi_controller *master, struct spi_device *spi, struct spi_transfer *transfer) { struct dw_spi *dws = spi_controller_get_devdata(master); struct chip_data *chip = spi_get_ctldata(spi); u8 imask = 0; u16 txlevel = 0; u32 cr0; int ret; dws->dma_mapped = 0; dws->tx = (void *)transfer->tx_buf; dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; dws->rx_end = dws->rx + transfer->len; dws->len = transfer->len; spi_enable_chip(dws, 0); /* Handle per transfer options for bpw and speed */ if (transfer->speed_hz != dws->current_freq) { if (transfer->speed_hz != chip->speed_hz) { /* clk_div doesn't support odd number */ chip->clk_div = (DIV_ROUND_UP(dws->max_freq, transfer->speed_hz) + 1) & 0xfffe; chip->speed_hz = transfer->speed_hz; } dws->current_freq = transfer->speed_hz; spi_set_clk(dws, chip->clk_div); } dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE); dws->dma_width = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE); /* Default SPI mode is SCPOL = 0, SCPH = 0 */ cr0 = (transfer->bits_per_word - 1) | (chip->type << SPI_FRF_OFFSET) | ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) | (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET)) | (chip->tmode << SPI_TMOD_OFFSET); /* * Adjust transfer mode if necessary. Requires platform dependent * chipselect mechanism. */ if (chip->cs_control) { if (dws->rx && dws->tx) chip->tmode = SPI_TMOD_TR; else if (dws->rx) chip->tmode = SPI_TMOD_RO; else chip->tmode = SPI_TMOD_TO; cr0 &= ~SPI_TMOD_MASK; cr0 |= (chip->tmode << SPI_TMOD_OFFSET); } dw_writel(dws, DW_SPI_CTRL0, cr0); /* Check if current transfer is a DMA transaction */ if (master->can_dma && master->can_dma(master, spi, transfer)) dws->dma_mapped = master->cur_msg_mapped; /* For poll mode just disable all interrupts */ spi_mask_intr(dws, 0xff); /* * Interrupt mode * we only need set the TXEI IRQ, as TX/RX always happen syncronizely */ if (dws->dma_mapped) { ret = dws->dma_ops->dma_setup(dws, transfer); if (ret < 0) { spi_enable_chip(dws, 1); return ret; } } else if (!chip->poll_mode) { txlevel = min_t(u16, dws->fifo_len / 2, dws->len / dws->n_bytes); dw_writel(dws, DW_SPI_TXFLTR, txlevel); /* Set the interrupt mask */ imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; spi_umask_intr(dws, imask); dws->transfer_handler = interrupt_transfer; } spi_enable_chip(dws, 1); if (dws->dma_mapped) { ret = dws->dma_ops->dma_transfer(dws, transfer); if (ret < 0) return ret; } if (chip->poll_mode) return poll_transfer(dws); return 1; } static void dw_spi_handle_err(struct spi_controller *master, struct spi_message *msg) { struct dw_spi *dws = spi_controller_get_devdata(master); if (dws->dma_mapped) dws->dma_ops->dma_stop(dws); spi_reset_chip(dws); } /* This may be called twice for each spi dev */ static int dw_spi_setup(struct spi_device *spi) { struct dw_spi_chip *chip_info = NULL; struct chip_data *chip; /* Only alloc on first setup */ chip = spi_get_ctldata(spi); if (!chip) { chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); if (!chip) return -ENOMEM; spi_set_ctldata(spi, chip); } /* * Protocol drivers may change the chip settings, so... * if chip_info exists, use it */ chip_info = spi->controller_data; /* chip_info doesn't always exist */ if (chip_info) { if (chip_info->cs_control) chip->cs_control = chip_info->cs_control; chip->poll_mode = chip_info->poll_mode; chip->type = chip_info->type; } chip->tmode = SPI_TMOD_TR; return 0; } static void dw_spi_cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); kfree(chip); spi_set_ctldata(spi, NULL); } /* Restart the controller, disable all interrupts, clean rx fifo */ static void spi_hw_init(struct device *dev, struct dw_spi *dws) { spi_reset_chip(dws); /* * Try to detect the FIFO depth if not set by interface driver, * the depth could be from 2 to 256 from HW spec */ if (!dws->fifo_len) { u32 fifo; for (fifo = 1; fifo < 256; fifo++) { dw_writel(dws, DW_SPI_TXFLTR, fifo); if (fifo != dw_readl(dws, DW_SPI_TXFLTR)) break; } dw_writel(dws, DW_SPI_TXFLTR, 0); dws->fifo_len = (fifo == 1) ? 0 : fifo; dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len); } /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */ if (dws->cs_override) dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF); } int dw_spi_add_host(struct device *dev, struct dw_spi *dws) { struct spi_controller *master; int ret; BUG_ON(dws == NULL); master = spi_alloc_master(dev, 0); if (!master) return -ENOMEM; dws->master = master; dws->type = SSI_MOTO_SPI; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR); spi_controller_set_devdata(master, dws); ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev), master); if (ret < 0) { dev_err(dev, "can not get IRQ\n"); goto err_free_master; } master->use_gpio_descriptors = true; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; master->setup = dw_spi_setup; master->cleanup = dw_spi_cleanup; master->set_cs = dw_spi_set_cs; master->transfer_one = dw_spi_transfer_one; master->handle_err = dw_spi_handle_err; master->max_speed_hz = dws->max_freq; master->dev.of_node = dev->of_node; master->dev.fwnode = dev->fwnode; master->flags = SPI_MASTER_GPIO_SS; if (dws->set_cs) master->set_cs = dws->set_cs; /* Basic HW init */ spi_hw_init(dev, dws); if (dws->dma_ops && dws->dma_ops->dma_init) { ret = dws->dma_ops->dma_init(dws); if (ret) { dev_warn(dev, "DMA init failed\n"); dws->dma_inited = 0; } else { master->can_dma = dws->dma_ops->can_dma; } } ret = devm_spi_register_controller(dev, master); if (ret) { dev_err(&master->dev, "problem registering spi master\n"); goto err_dma_exit; } dw_spi_debugfs_init(dws); return 0; err_dma_exit: if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); spi_enable_chip(dws, 0); free_irq(dws->irq, master); err_free_master: spi_controller_put(master); return ret; } EXPORT_SYMBOL_GPL(dw_spi_add_host); void dw_spi_remove_host(struct dw_spi *dws) { dw_spi_debugfs_remove(dws); if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); spi_shutdown_chip(dws); free_irq(dws->irq, dws->master); } EXPORT_SYMBOL_GPL(dw_spi_remove_host); int dw_spi_suspend_host(struct dw_spi *dws) { int ret; ret = spi_controller_suspend(dws->master); if (ret) return ret; spi_shutdown_chip(dws); return 0; } EXPORT_SYMBOL_GPL(dw_spi_suspend_host); int dw_spi_resume_host(struct dw_spi *dws) { spi_hw_init(&dws->master->dev, dws); return spi_controller_resume(dws->master); } EXPORT_SYMBOL_GPL(dw_spi_resume_host); MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); MODULE_LICENSE("GPL v2");