#define PSEUDO_DMA /* * Trantor T128/T128F/T228 driver * Note : architecturally, the T100 and T130 are different and won't * work * * Copyright 1993, Drew Eckhardt * Visionary Computing * (Unix and Linux consulting and custom programming) * drew@colorado.edu * +1 (303) 440-4894 * * DISTRIBUTION RELEASE 3. * * For more information, please consult * * Trantor Systems, Ltd. * T128/T128F/T228 SCSI Host Adapter * Hardware Specifications * * Trantor Systems, Ltd. * 5415 Randall Place * Fremont, CA 94538 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910 */ /* * The card is detected and initialized in one of several ways : * 1. Autoprobe (default) - since the board is memory mapped, * a BIOS signature is scanned for to locate the registers. * An interrupt is triggered to autoprobe for the interrupt * line. * * 2. With command line overrides - t128=address,irq may be * used on the LILO command line to override the defaults. * * 3. With the T128_OVERRIDE compile time define. This is * specified as an array of address, irq tuples. Ie, for * one board at the default 0xcc000 address, IRQ5, I could say * -DT128_OVERRIDE={{0xcc000, 5}} * * Note that if the override methods are used, place holders must * be specified for other boards in the system. * * T128/T128F jumper/dipswitch settings (note : on my sample, the switches * were epoxy'd shut, meaning I couldn't change the 0xcc000 base address) : * * T128 Sw7 Sw8 Sw6 = 0ws Sw5 = boot * T128F Sw6 Sw7 Sw5 = 0ws Sw4 = boot Sw8 = floppy disable * cc000 off off * c8000 off on * dc000 on off * d8000 on on * * * Interrupts * There is a 12 pin jumper block, jp1, numbered as follows : * T128 (JP1) T128F (J5) * 2 4 6 8 10 12 11 9 7 5 3 1 * 1 3 5 7 9 11 12 10 8 6 4 2 * * 3 2-4 * 5 1-3 * 7 3-5 * T128F only * 10 8-10 * 12 7-9 * 14 10-12 * 15 9-11 */ #include #include #include #include #include #include #include #include #include "scsi.h" #include #include "t128.h" #define AUTOPROBE_IRQ #include "NCR5380.h" static struct override { unsigned long address; int irq; } overrides #ifdef T128_OVERRIDE [] __initdata = T128_OVERRIDE; #else [4] __initdata = {{0, IRQ_AUTO}, {0, IRQ_AUTO}, {0 ,IRQ_AUTO}, {0, IRQ_AUTO}}; #endif #define NO_OVERRIDES ARRAY_SIZE(overrides) static struct base { unsigned int address; int noauto; } bases[] __initdata = { { 0xcc000, 0}, { 0xc8000, 0}, { 0xdc000, 0}, { 0xd8000, 0} }; #define NO_BASES ARRAY_SIZE(bases) static struct signature { const char *string; int offset; } signatures[] __initdata = { {"TSROM: SCSI BIOS, Version 1.12", 0x36}, }; #define NO_SIGNATURES ARRAY_SIZE(signatures) #ifndef MODULE /* * Function : t128_setup(char *str, int *ints) * * Purpose : LILO command line initialization of the overrides array, * * Inputs : str - unused, ints - array of integer parameters with ints[0] * equal to the number of ints. * */ static int __init t128_setup(char *str) { static int commandline_current = 0; int i; int ints[10]; get_options(str, ARRAY_SIZE(ints), ints); if (ints[0] != 2) printk("t128_setup : usage t128=address,irq\n"); else if (commandline_current < NO_OVERRIDES) { overrides[commandline_current].address = ints[1]; overrides[commandline_current].irq = ints[2]; for (i = 0; i < NO_BASES; ++i) if (bases[i].address == ints[1]) { bases[i].noauto = 1; break; } ++commandline_current; } return 1; } __setup("t128=", t128_setup); #endif /* * Function : int t128_detect(struct scsi_host_template * tpnt) * * Purpose : detects and initializes T128,T128F, or T228 controllers * that were autoprobed, overridden on the LILO command line, * or specified at compile time. * * Inputs : tpnt - template for this SCSI adapter. * * Returns : 1 if a host adapter was found, 0 if not. * */ static int __init t128_detect(struct scsi_host_template *tpnt) { static int current_override = 0, current_base = 0; struct Scsi_Host *instance; unsigned long base; void __iomem *p; int sig, count; for (count = 0; current_override < NO_OVERRIDES; ++current_override) { base = 0; p = NULL; if (overrides[current_override].address) { base = overrides[current_override].address; p = ioremap(bases[current_base].address, 0x2000); if (!p) base = 0; } else for (; !base && (current_base < NO_BASES); ++current_base) { #if (TDEBUG & TDEBUG_INIT) printk("scsi-t128 : probing address %08x\n", bases[current_base].address); #endif if (bases[current_base].noauto) continue; p = ioremap(bases[current_base].address, 0x2000); if (!p) continue; for (sig = 0; sig < NO_SIGNATURES; ++sig) if (check_signature(p + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) { base = bases[current_base].address; #if (TDEBUG & TDEBUG_INIT) printk("scsi-t128 : detected board.\n"); #endif goto found; } iounmap(p); } #if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) printk("scsi-t128 : base = %08x\n", (unsigned int) base); #endif if (!base) break; found: instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); if(instance == NULL) break; instance->base = base; ((struct NCR5380_hostdata *)instance->hostdata)->base = p; NCR5380_init(instance, 0); if (overrides[current_override].irq != IRQ_AUTO) instance->irq = overrides[current_override].irq; else instance->irq = NCR5380_probe_irq(instance, T128_IRQS); /* Compatibility with documented NCR5380 kernel parameters */ if (instance->irq == 255) instance->irq = NO_IRQ; if (instance->irq != NO_IRQ) if (request_irq(instance->irq, t128_intr, 0, "t128", instance)) { printk("scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = NO_IRQ; } if (instance->irq == NO_IRQ) { printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); } #if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT) printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); #endif printk("scsi%d : at 0x%08lx", instance->host_no, instance->base); if (instance->irq == NO_IRQ) printk (" interrupts disabled"); else printk (" irq %d", instance->irq); printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, T128_PUBLIC_RELEASE); NCR5380_print_options(instance); printk("\n"); ++current_override; ++count; } return count; } static int t128_release(struct Scsi_Host *shost) { NCR5380_local_declare(); NCR5380_setup(shost); if (shost->irq != NO_IRQ) free_irq(shost->irq, shost); NCR5380_exit(shost); if (shost->io_port && shost->n_io_port) release_region(shost->io_port, shost->n_io_port); scsi_unregister(shost); iounmap(base); return 0; } /* * Function : int t128_biosparam(Disk * disk, struct block_device *dev, int *ip) * * Purpose : Generates a BIOS / DOS compatible H-C-S mapping for * the specified device / size. * * Inputs : size = size of device in sectors (512 bytes), dev = block device * major / minor, ip[] = {heads, sectors, cylinders} * * Returns : always 0 (success), initializes ip * */ /* * XXX Most SCSI boards use this mapping, I could be incorrect. Some one * using hard disks on a trantor should verify that this mapping corresponds * to that used by the BIOS / ASPI driver by running the linux fdisk program * and matching the H_C_S coordinates to what DOS uses. */ static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *ip) { ip[0] = 64; ip[1] = 32; ip[2] = capacity >> 11; return 0; } /* * Function : int NCR5380_pread (struct Scsi_Host *instance, * unsigned char *dst, int len) * * Purpose : Fast 5380 pseudo-dma read function, transfers len bytes to * dst * * Inputs : dst = destination, len = length in bytes * * Returns : 0 on success, non zero on a failure such as a watchdog * timeout. */ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, int len) { NCR5380_local_declare(); void __iomem *reg; unsigned char *d = dst; register int i = len; NCR5380_setup(instance); reg = base + T_DATA_REG_OFFSET; #if 0 for (; i; --i) { while (!(readb(base+T_STATUS_REG_OFFSET) & T_ST_RDY)) barrier(); #else while (!(readb(base+T_STATUS_REG_OFFSET) & T_ST_RDY)) barrier(); for (; i; --i) { #endif *d++ = readb(reg); } if (readb(base + T_STATUS_REG_OFFSET) & T_ST_TIM) { unsigned char tmp; void __iomem *foo = base + T_CONTROL_REG_OFFSET; tmp = readb(foo); writeb(tmp | T_CR_CT, foo); writeb(tmp, foo); printk("scsi%d : watchdog timer fired in NCR5380_pread()\n", instance->host_no); return -1; } else return 0; } /* * Function : int NCR5380_pwrite (struct Scsi_Host *instance, * unsigned char *src, int len) * * Purpose : Fast 5380 pseudo-dma write function, transfers len bytes from * src * * Inputs : src = source, len = length in bytes * * Returns : 0 on success, non zero on a failure such as a watchdog * timeout. */ static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src, int len) { NCR5380_local_declare(); void __iomem *reg; unsigned char *s = src; register int i = len; NCR5380_setup(instance); reg = base + T_DATA_REG_OFFSET; #if 0 for (; i; --i) { while (!(readb(base+T_STATUS_REG_OFFSET) & T_ST_RDY)) barrier(); #else while (!(readb(base+T_STATUS_REG_OFFSET) & T_ST_RDY)) barrier(); for (; i; --i) { #endif writeb(*s++, reg); } if (readb(base + T_STATUS_REG_OFFSET) & T_ST_TIM) { unsigned char tmp; void __iomem *foo = base + T_CONTROL_REG_OFFSET; tmp = readb(foo); writeb(tmp | T_CR_CT, foo); writeb(tmp, foo); printk("scsi%d : watchdog timer fired in NCR5380_pwrite()\n", instance->host_no); return -1; } else return 0; } MODULE_LICENSE("GPL"); #include "NCR5380.c" static struct scsi_host_template driver_template = { .name = "Trantor T128/T128F/T228", .detect = t128_detect, .release = t128_release, .proc_name = "t128", .show_info = t128_show_info, .write_info = t128_write_info, .queuecommand = t128_queue_command, .eh_abort_handler = t128_abort, .eh_bus_reset_handler = t128_bus_reset, .bios_param = t128_biosparam, .can_queue = CAN_QUEUE, .this_id = 7, .sg_tablesize = SG_ALL, .cmd_per_lun = CMD_PER_LUN, .use_clustering = DISABLE_CLUSTERING, }; #include "scsi_module.c"