/* * Copyright (c) 2015-2016 Quantenna Communications, Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef _QTN_QLINK_H_ #define _QTN_QLINK_H_ #include #define QLINK_PROTO_VER 5 #define QLINK_MACID_RSVD 0xFF #define QLINK_VIFID_RSVD 0xFF /* Common QLINK protocol messages definitions. */ /** * enum qlink_msg_type - QLINK message types * * Used to distinguish between message types of QLINK protocol. * * @QLINK_MSG_TYPE_CMD: Message is carrying data of a command sent from * driver to wireless hardware. * @QLINK_MSG_TYPE_CMDRSP: Message is carrying data of a response to a command. * Sent from wireless HW to driver in reply to previously issued command. * @QLINK_MSG_TYPE_EVENT: Data for an event originated in wireless hardware and * sent asynchronously to driver. */ enum qlink_msg_type { QLINK_MSG_TYPE_CMD = 1, QLINK_MSG_TYPE_CMDRSP = 2, QLINK_MSG_TYPE_EVENT = 3 }; /** * struct qlink_msg_header - common QLINK protocol message header * * Portion of QLINK protocol header common for all message types. * * @type: Message type, one of &enum qlink_msg_type. * @len: Total length of message including all headers. */ struct qlink_msg_header { __le16 type; __le16 len; } __packed; /* Generic definitions of data and information carried in QLINK messages */ enum qlink_hw_capab { QLINK_HW_SUPPORTS_REG_UPDATE = BIT(0), }; enum qlink_phy_mode { QLINK_PHYMODE_BGN = BIT(0), QLINK_PHYMODE_AN = BIT(1), QLINK_PHYMODE_AC = BIT(2), }; enum qlink_iface_type { QLINK_IFTYPE_AP = 1, QLINK_IFTYPE_STATION = 2, QLINK_IFTYPE_ADHOC = 3, QLINK_IFTYPE_MONITOR = 4, QLINK_IFTYPE_WDS = 5, QLINK_IFTYPE_AP_VLAN = 6, }; /** * struct qlink_intf_info - information on virtual interface. * * Data describing a single virtual interface. * * @if_type: Mode of interface operation, one of &enum qlink_iface_type * @vlanid: VLAN ID for AP_VLAN interface type * @mac_addr: MAC address of virtual interface. */ struct qlink_intf_info { __le16 if_type; __le16 vlanid; u8 mac_addr[ETH_ALEN]; u8 rsvd[2]; } __packed; enum qlink_sta_flags { QLINK_STA_FLAG_INVALID = 0, QLINK_STA_FLAG_AUTHORIZED = BIT(0), QLINK_STA_FLAG_SHORT_PREAMBLE = BIT(1), QLINK_STA_FLAG_WME = BIT(2), QLINK_STA_FLAG_MFP = BIT(3), QLINK_STA_FLAG_AUTHENTICATED = BIT(4), QLINK_STA_FLAG_TDLS_PEER = BIT(5), QLINK_STA_FLAG_ASSOCIATED = BIT(6), }; enum qlink_channel_width { QLINK_CHAN_WIDTH_5 = BIT(0), QLINK_CHAN_WIDTH_10 = BIT(1), QLINK_CHAN_WIDTH_20_NOHT = BIT(2), QLINK_CHAN_WIDTH_20 = BIT(3), QLINK_CHAN_WIDTH_40 = BIT(4), QLINK_CHAN_WIDTH_80 = BIT(5), QLINK_CHAN_WIDTH_80P80 = BIT(6), QLINK_CHAN_WIDTH_160 = BIT(7), }; /* QLINK Command messages related definitions */ /** * enum qlink_cmd_type - list of supported commands * * Commands are QLINK messages of type @QLINK_MSG_TYPE_CMD, sent by driver to * wireless network device for processing. Device is expected to send back a * reply message of type &QLINK_MSG_TYPE_CMDRSP, containing at least command * execution status (one of &enum qlink_cmd_result) at least. Reply message * may also contain data payload specific to the command type. * * @QLINK_CMD_CHANS_INFO_GET: for the specified MAC and specified band, get * number of operational channels and information on each of the channel. * This command is generic to a specified MAC, interface index must be set * to QLINK_VIFID_RSVD in command header. * @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This * command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE * capability. */ enum qlink_cmd_type { QLINK_CMD_FW_INIT = 0x0001, QLINK_CMD_FW_DEINIT = 0x0002, QLINK_CMD_REGISTER_MGMT = 0x0003, QLINK_CMD_SEND_MGMT_FRAME = 0x0004, QLINK_CMD_MGMT_SET_APPIE = 0x0005, QLINK_CMD_PHY_PARAMS_GET = 0x0011, QLINK_CMD_PHY_PARAMS_SET = 0x0012, QLINK_CMD_GET_HW_INFO = 0x0013, QLINK_CMD_MAC_INFO = 0x0014, QLINK_CMD_ADD_INTF = 0x0015, QLINK_CMD_DEL_INTF = 0x0016, QLINK_CMD_CHANGE_INTF = 0x0017, QLINK_CMD_UPDOWN_INTF = 0x0018, QLINK_CMD_REG_NOTIFY = 0x0019, QLINK_CMD_CHANS_INFO_GET = 0x001A, QLINK_CMD_CHAN_SWITCH = 0x001B, QLINK_CMD_CONFIG_AP = 0x0020, QLINK_CMD_START_AP = 0x0021, QLINK_CMD_STOP_AP = 0x0022, QLINK_CMD_GET_STA_INFO = 0x0030, QLINK_CMD_ADD_KEY = 0x0040, QLINK_CMD_DEL_KEY = 0x0041, QLINK_CMD_SET_DEFAULT_KEY = 0x0042, QLINK_CMD_SET_DEFAULT_MGMT_KEY = 0x0043, QLINK_CMD_CHANGE_STA = 0x0051, QLINK_CMD_DEL_STA = 0x0052, QLINK_CMD_SCAN = 0x0053, QLINK_CMD_CHAN_STATS = 0x0054, QLINK_CMD_CONNECT = 0x0060, QLINK_CMD_DISCONNECT = 0x0061, }; /** * struct qlink_cmd - QLINK command message header * * Header used for QLINK messages of QLINK_MSG_TYPE_CMD type. * * @mhdr: Common QLINK message header. * @cmd_id: command id, one of &enum qlink_cmd_type. * @seq_num: sequence number of command message, used for matching with * response message. * @macid: index of physical radio device the command is destined to or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the command * is destined to or QLINK_VIFID_RSVD if not applicable. */ struct qlink_cmd { struct qlink_msg_header mhdr; __le16 cmd_id; __le16 seq_num; u8 rsvd[2]; u8 macid; u8 vifid; } __packed; /** * struct qlink_cmd_manage_intf - interface management command * * Data for interface management commands QLINK_CMD_ADD_INTF, QLINK_CMD_DEL_INTF * and QLINK_CMD_CHANGE_INTF. * * @intf_info: interface description. */ struct qlink_cmd_manage_intf { struct qlink_cmd chdr; struct qlink_intf_info intf_info; } __packed; enum qlink_mgmt_frame_type { QLINK_MGMT_FRAME_ASSOC_REQ = 0x00, QLINK_MGMT_FRAME_ASSOC_RESP = 0x01, QLINK_MGMT_FRAME_REASSOC_REQ = 0x02, QLINK_MGMT_FRAME_REASSOC_RESP = 0x03, QLINK_MGMT_FRAME_PROBE_REQ = 0x04, QLINK_MGMT_FRAME_PROBE_RESP = 0x05, QLINK_MGMT_FRAME_BEACON = 0x06, QLINK_MGMT_FRAME_ATIM = 0x07, QLINK_MGMT_FRAME_DISASSOC = 0x08, QLINK_MGMT_FRAME_AUTH = 0x09, QLINK_MGMT_FRAME_DEAUTH = 0x0A, QLINK_MGMT_FRAME_ACTION = 0x0B, QLINK_MGMT_FRAME_TYPE_COUNT }; /** * struct qlink_cmd_mgmt_frame_register - data for QLINK_CMD_REGISTER_MGMT * * @frame_type: MGMT frame type the registration request describes, one of * &enum qlink_mgmt_frame_type. * @do_register: 0 - unregister, otherwise register for reception of specified * MGMT frame type. */ struct qlink_cmd_mgmt_frame_register { struct qlink_cmd chdr; __le16 frame_type; u8 do_register; } __packed; enum qlink_mgmt_frame_tx_flags { QLINK_MGMT_FRAME_TX_FLAG_NONE = 0, QLINK_MGMT_FRAME_TX_FLAG_OFFCHAN = BIT(0), QLINK_MGMT_FRAME_TX_FLAG_NO_CCK = BIT(1), QLINK_MGMT_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2), }; /** * struct qlink_cmd_mgmt_frame_tx - data for QLINK_CMD_SEND_MGMT_FRAME command * * @cookie: opaque request identifier. * @freq: Frequency to use for frame transmission. * @flags: Transmission flags, one of &enum qlink_mgmt_frame_tx_flags. * @frame_data: frame to transmit. */ struct qlink_cmd_mgmt_frame_tx { struct qlink_cmd chdr; __le32 cookie; __le16 freq; __le16 flags; u8 frame_data[0]; } __packed; /** * struct qlink_cmd_mgmt_append_ie - data for QLINK_CMD_MGMT_SET_APPIE command * * @type: type of MGMT frame to appent requested IEs to, one of * &enum qlink_mgmt_frame_type. * @flags: for future use. * @ie_data: IEs data to append. */ struct qlink_cmd_mgmt_append_ie { struct qlink_cmd chdr; u8 type; u8 flags; u8 ie_data[0]; } __packed; /** * struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command * * @sta_addr: MAC address of the STA statistics is requested for. */ struct qlink_cmd_get_sta_info { struct qlink_cmd chdr; u8 sta_addr[ETH_ALEN]; } __packed; /** * struct qlink_cmd_add_key - data for QLINK_CMD_ADD_KEY command. * * @key_index: index of the key being installed. * @pairwise: whether to use pairwise key. * @addr: MAC address of a STA key is being installed to. * @cipher: cipher suite. * @vlanid: VLAN ID for AP_VLAN interface type * @key_data: key data itself. */ struct qlink_cmd_add_key { struct qlink_cmd chdr; u8 key_index; u8 pairwise; u8 addr[ETH_ALEN]; __le32 cipher; __le16 vlanid; u8 key_data[0]; } __packed; /** * struct qlink_cmd_del_key_req - data for QLINK_CMD_DEL_KEY command * * @key_index: index of the key being removed. * @pairwise: whether to use pairwise key. * @addr: MAC address of a STA for which a key is removed. */ struct qlink_cmd_del_key { struct qlink_cmd chdr; u8 key_index; u8 pairwise; u8 addr[ETH_ALEN]; } __packed; /** * struct qlink_cmd_set_def_key - data for QLINK_CMD_SET_DEFAULT_KEY command * * @key_index: index of the key to be set as default one. * @unicast: key is unicast. * @multicast: key is multicast. */ struct qlink_cmd_set_def_key { struct qlink_cmd chdr; u8 key_index; u8 unicast; u8 multicast; } __packed; /** * struct qlink_cmd_set_def_mgmt_key - data for QLINK_CMD_SET_DEFAULT_MGMT_KEY * * @key_index: index of the key to be set as default MGMT key. */ struct qlink_cmd_set_def_mgmt_key { struct qlink_cmd chdr; u8 key_index; } __packed; /** * struct qlink_cmd_change_sta - data for QLINK_CMD_CHANGE_STA command * * @sta_flags_mask: STA flags mask, bitmap of &enum qlink_sta_flags * @sta_flags_set: STA flags values, bitmap of &enum qlink_sta_flags * @if_type: Mode of interface operation, one of &enum qlink_iface_type * @vlanid: VLAN ID to assign to specific STA * @sta_addr: address of the STA for which parameters are set. */ struct qlink_cmd_change_sta { struct qlink_cmd chdr; __le32 sta_flags_mask; __le32 sta_flags_set; __le16 if_type; __le16 vlanid; u8 sta_addr[ETH_ALEN]; } __packed; /** * struct qlink_cmd_del_sta - data for QLINK_CMD_DEL_STA command. * * See &struct station_del_parameters */ struct qlink_cmd_del_sta { struct qlink_cmd chdr; __le16 reason_code; u8 subtype; u8 sta_addr[ETH_ALEN]; } __packed; enum qlink_sta_connect_flags { QLINK_STA_CONNECT_DISABLE_HT = BIT(0), QLINK_STA_CONNECT_DISABLE_VHT = BIT(1), QLINK_STA_CONNECT_USE_RRM = BIT(2), }; /** * struct qlink_cmd_connect - data for QLINK_CMD_CONNECT command * * @flags: for future use. * @freq: center frequence of a channel which should be used to connect. * @bg_scan_period: period of background scan. * @bssid: BSSID of the BSS to connect to. * @payload: variable portion of connection request. */ struct qlink_cmd_connect { struct qlink_cmd chdr; __le32 flags; __le16 channel; __le16 bg_scan_period; u8 bssid[ETH_ALEN]; u8 payload[0]; } __packed; /** * struct qlink_cmd_disconnect - data for QLINK_CMD_DISCONNECT command * * @reason: code of the reason of disconnect, see &enum ieee80211_reasoncode. */ struct qlink_cmd_disconnect { struct qlink_cmd chdr; __le16 reason; } __packed; /** * struct qlink_cmd_updown - data for QLINK_CMD_UPDOWN_INTF command * * @if_up: bring specified interface DOWN (if_up==0) or UP (otherwise). * Interface is specified in common command header @chdr. */ struct qlink_cmd_updown { struct qlink_cmd chdr; u8 if_up; } __packed; /** * enum qlink_band - a list of frequency bands * * @QLINK_BAND_2GHZ: 2.4GHz band * @QLINK_BAND_5GHZ: 5GHz band * @QLINK_BAND_60GHZ: 60GHz band */ enum qlink_band { QLINK_BAND_2GHZ = BIT(0), QLINK_BAND_5GHZ = BIT(1), QLINK_BAND_60GHZ = BIT(2), }; /** * struct qlink_cmd_chans_info_get - data for QLINK_CMD_CHANS_INFO_GET command * * @band: a PHY band for which channels info is needed, one of @enum qlink_band */ struct qlink_cmd_chans_info_get { struct qlink_cmd chdr; u8 band; } __packed; /** * struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command * * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J */ struct qlink_cmd_get_chan_stats { struct qlink_cmd chdr; __le16 channel; } __packed; /** * enum qlink_reg_initiator - Indicates the initiator of a reg domain request * * See &enum nl80211_reg_initiator for more info. */ enum qlink_reg_initiator { QLINK_REGDOM_SET_BY_CORE, QLINK_REGDOM_SET_BY_USER, QLINK_REGDOM_SET_BY_DRIVER, QLINK_REGDOM_SET_BY_COUNTRY_IE, }; /** * enum qlink_user_reg_hint_type - type of user regulatory hint * * See &enum nl80211_user_reg_hint_type for more info. */ enum qlink_user_reg_hint_type { QLINK_USER_REG_HINT_USER = 0, QLINK_USER_REG_HINT_CELL_BASE = 1, QLINK_USER_REG_HINT_INDOOR = 2, }; /** * struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command * * @alpha2: the ISO / IEC 3166 alpha2 country code. * @initiator: which entity sent the request, one of &enum qlink_reg_initiator. * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one * of &enum qlink_user_reg_hint_type. */ struct qlink_cmd_reg_notify { struct qlink_cmd chdr; u8 alpha2[2]; u8 initiator; u8 user_reg_hint_type; } __packed; /** * struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command * * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J * @radar_required: whether radar detection is required on the new channel * @block_tx: whether transmissions should be blocked while changing * @beacon_count: number of beacons until switch */ struct qlink_cmd_chan_switch { struct qlink_cmd chdr; __le16 channel; u8 radar_required; u8 block_tx; u8 beacon_count; } __packed; /* QLINK Command Responses messages related definitions */ enum qlink_cmd_result { QLINK_CMD_RESULT_OK = 0, QLINK_CMD_RESULT_INVALID, QLINK_CMD_RESULT_ENOTSUPP, QLINK_CMD_RESULT_ENOTFOUND, QLINK_CMD_RESULT_EALREADY, }; /** * struct qlink_resp - QLINK command response message header * * Header used for QLINK messages of QLINK_MSG_TYPE_CMDRSP type. * * @mhdr: see &struct qlink_msg_header. * @cmd_id: command ID the response corresponds to, one of &enum qlink_cmd_type. * @seq_num: sequence number of command message, used for matching with * response message. * @result: result of the command execution, one of &enum qlink_cmd_result. * @macid: index of physical radio device the response is sent from or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the response * is sent from or QLINK_VIFID_RSVD if not applicable. */ struct qlink_resp { struct qlink_msg_header mhdr; __le16 cmd_id; __le16 seq_num; __le16 result; u8 macid; u8 vifid; } __packed; /** * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command * * Data describing specific physical device providing wireless MAC * functionality. * * @dev_mac: MAC address of physical WMAC device (used for first BSS on * specified WMAC). * @num_tx_chain: Number of transmit chains used by WMAC. * @num_rx_chain: Number of receive chains used by WMAC. * @vht_cap: VHT capabilities. * @ht_cap: HT capabilities. * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band. * @phymode_cap: PHY modes WMAC can operate in, bitmap of &enum qlink_phy_mode. * @max_ap_assoc_sta: Maximum number of associations supported by WMAC. * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar. * @var_info: variable-length WMAC info data. */ struct qlink_resp_get_mac_info { struct qlink_resp rhdr; u8 dev_mac[ETH_ALEN]; u8 num_tx_chain; u8 num_rx_chain; struct ieee80211_vht_cap vht_cap; struct ieee80211_ht_cap ht_cap; u8 bands_cap; u8 phymode_cap; __le16 max_ap_assoc_sta; __le16 radar_detect_widths; u8 var_info[0]; } __packed; /** * enum qlink_dfs_regions - regulatory DFS regions * * Corresponds to &enum nl80211_dfs_regions. */ enum qlink_dfs_regions { QLINK_DFS_UNSET = 0, QLINK_DFS_FCC = 1, QLINK_DFS_ETSI = 2, QLINK_DFS_JP = 3, }; /** * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command * * Description of wireless hardware capabilities and features. * * @fw_ver: wireless hardware firmware version. * @hw_capab: Bitmap of capabilities supported by firmware. * @ql_proto_ver: Version of QLINK protocol used by firmware. * @num_mac: Number of separate physical radio devices provided by hardware. * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware. * @total_tx_chains: total number of transmit chains used by device. * @total_rx_chains: total number of receive chains. * @alpha2: country code ID firmware is configured to. * @n_reg_rules: number of regulatory rules TLVs in variable portion of the * message. * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region. * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE. */ struct qlink_resp_get_hw_info { struct qlink_resp rhdr; __le32 fw_ver; __le32 hw_capab; __le16 ql_proto_ver; u8 num_mac; u8 mac_bitmap; u8 total_tx_chain; u8 total_rx_chain; u8 alpha2[2]; u8 n_reg_rules; u8 dfs_region; u8 info[0]; } __packed; /** * struct qlink_resp_manage_intf - response for interface management commands * * Response data for QLINK_CMD_ADD_INTF and QLINK_CMD_CHANGE_INTF commands. * * @rhdr: Common Command Response message header. * @intf_info: interface description. */ struct qlink_resp_manage_intf { struct qlink_resp rhdr; struct qlink_intf_info intf_info; } __packed; /** * struct qlink_resp_get_sta_info - response for QLINK_CMD_GET_STA_INFO command * * Response data containing statistics for specified STA. * * @sta_addr: MAC address of STA the response carries statistic for. * @info: statistics for specified STA. */ struct qlink_resp_get_sta_info { struct qlink_resp rhdr; u8 sta_addr[ETH_ALEN]; u8 info[0]; } __packed; /** * struct qlink_resp_get_chan_info - response for QLINK_CMD_CHANS_INFO_GET cmd * * @band: frequency band to which channels belong to, one of @enum qlink_band. * @num_chans: total number of channels info data contained in reply data. * @info: variable-length channels info. */ struct qlink_resp_get_chan_info { struct qlink_resp rhdr; u8 band; u8 num_chans; u8 rsvd[2]; u8 info[0]; } __packed; /** * struct qlink_resp_phy_params - response for QLINK_CMD_PHY_PARAMS_GET command * * @info: variable-length array of PHY params. */ struct qlink_resp_phy_params { struct qlink_resp rhdr; u8 info[0]; } __packed; /** * struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd * * @info: variable-length channel info. */ struct qlink_resp_get_chan_stats { struct qlink_cmd rhdr; u8 info[0]; } __packed; /* QLINK Events messages related definitions */ enum qlink_event_type { QLINK_EVENT_STA_ASSOCIATED = 0x0021, QLINK_EVENT_STA_DEAUTH = 0x0022, QLINK_EVENT_MGMT_RECEIVED = 0x0023, QLINK_EVENT_SCAN_RESULTS = 0x0024, QLINK_EVENT_SCAN_COMPLETE = 0x0025, QLINK_EVENT_BSS_JOIN = 0x0026, QLINK_EVENT_BSS_LEAVE = 0x0027, QLINK_EVENT_FREQ_CHANGE = 0x0028, }; /** * struct qlink_event - QLINK event message header * * Header used for QLINK messages of QLINK_MSG_TYPE_EVENT type. * * @mhdr: Common QLINK message header. * @event_id: Specifies specific event ID, one of &enum qlink_event_type. * @macid: index of physical radio device the event was generated on or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the event * was generated on or QLINK_VIFID_RSVD if not applicable. */ struct qlink_event { struct qlink_msg_header mhdr; __le16 event_id; u8 macid; u8 vifid; } __packed; /** * struct qlink_event_sta_assoc - data for QLINK_EVENT_STA_ASSOCIATED event * * @sta_addr: Address of a STA for which new association event was generated * @frame_control: control bits from 802.11 ASSOC_REQUEST header. * @payload: IEs from association request. */ struct qlink_event_sta_assoc { struct qlink_event ehdr; u8 sta_addr[ETH_ALEN]; __le16 frame_control; u8 ies[0]; } __packed; /** * struct qlink_event_sta_deauth - data for QLINK_EVENT_STA_DEAUTH event * * @sta_addr: Address of a deauthenticated STA. * @reason: reason for deauthentication. */ struct qlink_event_sta_deauth { struct qlink_event ehdr; u8 sta_addr[ETH_ALEN]; __le16 reason; } __packed; /** * struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event * * @bssid: BSSID of a BSS which interface tried to joined. * @status: status of joining attempt, see &enum ieee80211_statuscode. */ struct qlink_event_bss_join { struct qlink_event ehdr; u8 bssid[ETH_ALEN]; __le16 status; } __packed; /** * struct qlink_event_bss_leave - data for QLINK_EVENT_BSS_LEAVE event * * @reason: reason of disconnecting from BSS. */ struct qlink_event_bss_leave { struct qlink_event ehdr; __le16 reason; } __packed; /** * struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event * * @freq: new operating frequency in MHz */ struct qlink_event_freq_change { struct qlink_event ehdr; __le32 freq; } __packed; enum qlink_rxmgmt_flags { QLINK_RXMGMT_FLAG_ANSWERED = 1 << 0, }; /** * struct qlink_event_rxmgmt - data for QLINK_EVENT_MGMT_RECEIVED event * * @freq: Frequency on which the frame was received in MHz. * @sig_dbm: signal strength in dBm. * @flags: bitmap of &enum qlink_rxmgmt_flags. * @frame_data: data of Rx'd frame itself. */ struct qlink_event_rxmgmt { struct qlink_event ehdr; __le32 freq; __le32 sig_dbm; __le32 flags; u8 frame_data[0]; } __packed; enum qlink_frame_type { QLINK_BSS_FTYPE_UNKNOWN, QLINK_BSS_FTYPE_BEACON, QLINK_BSS_FTYPE_PRESP, }; /** * struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event * * @tsf: TSF timestamp indicating when scan results were generated. * @freq: Center frequency of the channel where BSS for which the scan result * event was generated was discovered. * @capab: capabilities field. * @bintval: beacon interval announced by discovered BSS. * @signal: signal strength. * @frame_type: frame type used to get scan result, see &enum qlink_frame_type. * @bssid: BSSID announced by discovered BSS. * @ssid_len: length of SSID announced by BSS. * @ssid: SSID announced by discovered BSS. * @payload: IEs that are announced by discovered BSS in its MGMt frames. */ struct qlink_event_scan_result { struct qlink_event ehdr; __le64 tsf; __le16 freq; __le16 capab; __le16 bintval; s8 signal; u8 frame_type; u8 bssid[ETH_ALEN]; u8 ssid_len; u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 payload[0]; } __packed; /** * enum qlink_scan_complete_flags - indicates result of scan request. * * @QLINK_SCAN_NONE: Scan request was processed. * @QLINK_SCAN_ABORTED: Scan was aborted. */ enum qlink_scan_complete_flags { QLINK_SCAN_NONE = 0, QLINK_SCAN_ABORTED = BIT(0), }; /** * struct qlink_event_scan_complete - data for QLINK_EVENT_SCAN_COMPLETE event * * @flags: flags indicating the status of pending scan request, * see &enum qlink_scan_complete_flags. */ struct qlink_event_scan_complete { struct qlink_event ehdr; __le32 flags; } __packed; /* QLINK TLVs (Type-Length Values) definitions */ enum qlink_tlv_id { QTN_TLV_ID_FRAG_THRESH = 0x0201, QTN_TLV_ID_RTS_THRESH = 0x0202, QTN_TLV_ID_SRETRY_LIMIT = 0x0203, QTN_TLV_ID_LRETRY_LIMIT = 0x0204, QTN_TLV_ID_BCN_PERIOD = 0x0205, QTN_TLV_ID_DTIM = 0x0206, QTN_TLV_ID_REG_RULE = 0x0207, QTN_TLV_ID_CHANNEL = 0x020F, QTN_TLV_ID_COVERAGE_CLASS = 0x0213, QTN_TLV_ID_IFACE_LIMIT = 0x0214, QTN_TLV_ID_NUM_IFACE_COMB = 0x0215, QTN_TLV_ID_CHANNEL_STATS = 0x0216, QTN_TLV_ID_STA_BASIC_COUNTERS = 0x0300, QTN_TLV_ID_STA_GENERIC_INFO = 0x0301, QTN_TLV_ID_KEY = 0x0302, QTN_TLV_ID_SEQ = 0x0303, QTN_TLV_ID_CRYPTO = 0x0304, QTN_TLV_ID_IE_SET = 0x0305, }; struct qlink_tlv_hdr { __le16 type; __le16 len; u8 val[0]; } __packed; struct qlink_iface_limit { __le16 max_num; __le16 type; } __packed; struct qlink_iface_comb_num { __le16 iface_comb_num; } __packed; struct qlink_sta_stat_basic_counters { __le64 rx_bytes; __le64 tx_bytes; __le64 rx_beacons; __le32 rx_packets; __le32 tx_packets; __le32 rx_dropped; __le32 tx_failed; } __packed; enum qlink_sta_info_rate_flags { QLINK_STA_INFO_RATE_FLAG_INVALID = 0, QLINK_STA_INFO_RATE_FLAG_HT_MCS = BIT(0), QLINK_STA_INFO_RATE_FLAG_VHT_MCS = BIT(1), QLINK_STA_INFO_RATE_FLAG_SHORT_GI = BIT(2), QLINK_STA_INFO_RATE_FLAG_60G = BIT(3), }; enum qlink_sta_info_rate_bw { QLINK_STA_INFO_RATE_BW_5 = 0, QLINK_STA_INFO_RATE_BW_10 = 1, QLINK_STA_INFO_RATE_BW_20 = 2, QLINK_STA_INFO_RATE_BW_40 = 3, QLINK_STA_INFO_RATE_BW_80 = 4, QLINK_STA_INFO_RATE_BW_160 = 5, }; /** * struct qlink_sta_info_rate - STA rate statistics * * @rate: data rate in Mbps. * @flags: bitmap of &enum qlink_sta_flags. * @mcs: 802.11-defined MCS index. * nss: Number of Spatial Streams. * @bw: bandwidth, one of &enum qlink_sta_info_rate_bw. */ struct qlink_sta_info_rate { __le16 rate; u8 flags; u8 mcs; u8 nss; u8 bw; } __packed; struct qlink_sta_info_state { __le32 mask; __le32 value; } __packed; #define QLINK_RSSI_OFFSET 120 struct qlink_sta_info_generic { struct qlink_sta_info_state state; __le32 connected_time; __le32 inactive_time; struct qlink_sta_info_rate rx_rate; struct qlink_sta_info_rate tx_rate; u8 rssi; u8 rssi_avg; } __packed; struct qlink_tlv_frag_rts_thr { struct qlink_tlv_hdr hdr; __le16 thr; } __packed; struct qlink_tlv_rlimit { struct qlink_tlv_hdr hdr; u8 rlimit; } __packed; struct qlink_tlv_cclass { struct qlink_tlv_hdr hdr; u8 cclass; } __packed; /** * enum qlink_reg_rule_flags - regulatory rule flags * * See description of &enum nl80211_reg_rule_flags */ enum qlink_reg_rule_flags { QLINK_RRF_NO_OFDM = BIT(0), QLINK_RRF_NO_CCK = BIT(1), QLINK_RRF_NO_INDOOR = BIT(2), QLINK_RRF_NO_OUTDOOR = BIT(3), QLINK_RRF_DFS = BIT(4), QLINK_RRF_PTP_ONLY = BIT(5), QLINK_RRF_PTMP_ONLY = BIT(6), QLINK_RRF_NO_IR = BIT(7), QLINK_RRF_AUTO_BW = BIT(8), QLINK_RRF_IR_CONCURRENT = BIT(9), QLINK_RRF_NO_HT40MINUS = BIT(10), QLINK_RRF_NO_HT40PLUS = BIT(11), QLINK_RRF_NO_80MHZ = BIT(12), QLINK_RRF_NO_160MHZ = BIT(13), }; /** * struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV * * Regulatory rule description. * * @start_freq_khz: start frequency of the range the rule is attributed to. * @end_freq_khz: end frequency of the range the rule is attributed to. * @max_bandwidth_khz: max bandwidth that channels in specified range can be * configured to. * @max_antenna_gain: max antenna gain that can be used in the specified * frequency range, dBi. * @max_eirp: maximum EIRP. * @flags: regulatory rule flags in &enum qlink_reg_rule_flags. * @dfs_cac_ms: DFS CAC period. */ struct qlink_tlv_reg_rule { struct qlink_tlv_hdr hdr; __le32 start_freq_khz; __le32 end_freq_khz; __le32 max_bandwidth_khz; __le32 max_antenna_gain; __le32 max_eirp; __le32 flags; __le32 dfs_cac_ms; } __packed; enum qlink_channel_flags { QLINK_CHAN_DISABLED = BIT(0), QLINK_CHAN_NO_IR = BIT(1), QLINK_CHAN_RADAR = BIT(3), QLINK_CHAN_NO_HT40PLUS = BIT(4), QLINK_CHAN_NO_HT40MINUS = BIT(5), QLINK_CHAN_NO_OFDM = BIT(6), QLINK_CHAN_NO_80MHZ = BIT(7), QLINK_CHAN_NO_160MHZ = BIT(8), QLINK_CHAN_INDOOR_ONLY = BIT(9), QLINK_CHAN_IR_CONCURRENT = BIT(10), QLINK_CHAN_NO_20MHZ = BIT(11), QLINK_CHAN_NO_10MHZ = BIT(12), }; enum qlink_dfs_state { QLINK_DFS_USABLE, QLINK_DFS_UNAVAILABLE, QLINK_DFS_AVAILABLE, }; struct qlink_tlv_channel { struct qlink_tlv_hdr hdr; __le16 hw_value; __le16 center_freq; __le32 flags; u8 band; u8 max_antenna_gain; u8 max_power; u8 max_reg_power; __le32 dfs_cac_ms; u8 dfs_state; u8 beacon_found; u8 rsvd[2]; } __packed; #define QLINK_MAX_NR_CIPHER_SUITES 5 #define QLINK_MAX_NR_AKM_SUITES 2 struct qlink_auth_encr { __le32 wpa_versions; __le32 cipher_group; __le32 n_ciphers_pairwise; __le32 ciphers_pairwise[QLINK_MAX_NR_CIPHER_SUITES]; __le32 n_akm_suites; __le32 akm_suites[QLINK_MAX_NR_AKM_SUITES]; __le16 control_port_ethertype; u8 auth_type; u8 privacy; u8 mfp; u8 control_port; u8 control_port_no_encrypt; } __packed; struct qlink_chan_stats { __le32 chan_num; __le32 cca_tx; __le32 cca_rx; __le32 cca_busy; __le32 cca_try; s8 chan_noise; } __packed; #endif /* _QTN_QLINK_H_ */