/* * Nano River Technologies viperboard driver * * This is the core driver for the viperboard. There are cell drivers * available for I2C, ADC and both GPIOs. SPI is not yet supported. * The drivers do not support all features the board exposes. See user * manual of the viperboard. * * (C) 2012 by Lemonage GmbH * Author: Lars Poeschel <poeschel@lemonage.de> * All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/mutex.h> #include <linux/mfd/core.h> #include <linux/mfd/viperboard.h> #include <linux/usb.h> static const struct usb_device_id vprbrd_table[] = { { USB_DEVICE(0x2058, 0x1005) }, /* Nano River Technologies */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, vprbrd_table); static struct mfd_cell vprbrd_devs[] = { { .name = "viperboard-gpio", }, { .name = "viperboard-i2c", }, { .name = "viperboard-adc", }, }; static int vprbrd_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct vprbrd *vb; u16 version = 0; int pipe, ret; /* allocate memory for our device state and initialize it */ vb = kzalloc(sizeof(*vb), GFP_KERNEL); if (vb == NULL) { dev_err(&interface->dev, "Out of memory\n"); return -ENOMEM; } mutex_init(&vb->lock); vb->usb_dev = usb_get_dev(interface_to_usbdev(interface)); /* save our data pointer in this interface device */ usb_set_intfdata(interface, vb); dev_set_drvdata(&vb->pdev.dev, vb); /* get version information, major first, minor then */ pipe = usb_rcvctrlpipe(vb->usb_dev, 0); ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MAJOR, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, VPRBRD_USB_TIMEOUT_MS); if (ret == 1) version = vb->buf[0]; ret = usb_control_msg(vb->usb_dev, pipe, VPRBRD_USB_REQUEST_MINOR, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, vb->buf, 1, VPRBRD_USB_TIMEOUT_MS); if (ret == 1) { version <<= 8; version = version | vb->buf[0]; } dev_info(&interface->dev, "version %x.%02x found at bus %03d address %03d\n", version >> 8, version & 0xff, vb->usb_dev->bus->busnum, vb->usb_dev->devnum); ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL); if (ret != 0) { dev_err(&interface->dev, "Failed to add mfd devices to core."); goto error; } return 0; error: if (vb) { usb_put_dev(vb->usb_dev); kfree(vb); } return ret; } static void vprbrd_disconnect(struct usb_interface *interface) { struct vprbrd *vb = usb_get_intfdata(interface); mfd_remove_devices(&interface->dev); usb_set_intfdata(interface, NULL); usb_put_dev(vb->usb_dev); kfree(vb); dev_dbg(&interface->dev, "disconnected\n"); } static struct usb_driver vprbrd_driver = { .name = "viperboard", .probe = vprbrd_probe, .disconnect = vprbrd_disconnect, .id_table = vprbrd_table, }; module_usb_driver(vprbrd_driver); MODULE_DESCRIPTION("Nano River Technologies viperboard mfd core driver"); MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>"); MODULE_LICENSE("GPL");