/* * ImgTec IR Hardware Decoder found in PowerDown Controller. * * Copyright 2010-2014 Imagination Technologies Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #ifndef _IMG_IR_HW_H_ #define _IMG_IR_HW_H_ #include #include /* constants */ #define IMG_IR_CODETYPE_PULSELEN 0x0 /* Sony */ #define IMG_IR_CODETYPE_PULSEDIST 0x1 /* NEC, Toshiba, Micom, Sharp */ #define IMG_IR_CODETYPE_BIPHASE 0x2 /* RC-5/6 */ #define IMG_IR_CODETYPE_2BITPULSEPOS 0x3 /* RC-MM */ /* Timing information */ /** * struct img_ir_control - Decoder control settings * @decoden: Primary decoder enable * @code_type: Decode type (see IMG_IR_CODETYPE_*) * @hdrtog: Detect header toggle symbol after leader symbol * @ldrdec: Don't discard leader if maximum width reached * @decodinpol: Decoder input polarity (1=active high) * @bitorien: Bit orientation (1=MSB first) * @d1validsel: Decoder 2 takes over if it detects valid data * @bitinv: Bit inversion switch (1=don't invert) * @decodend2: Secondary decoder enable (no leader symbol) * @bitoriend2: Bit orientation (1=MSB first) * @bitinvd2: Secondary decoder bit inversion switch (1=don't invert) */ struct img_ir_control { unsigned decoden:1; unsigned code_type:2; unsigned hdrtog:1; unsigned ldrdec:1; unsigned decodinpol:1; unsigned bitorien:1; unsigned d1validsel:1; unsigned bitinv:1; unsigned decodend2:1; unsigned bitoriend2:1; unsigned bitinvd2:1; }; /** * struct img_ir_timing_range - range of timing values * @min: Minimum timing value * @max: Maximum timing value (if < @min, this will be set to @min during * preprocessing step, so it is normally not explicitly initialised * and is taken care of by the tolerance) */ struct img_ir_timing_range { u16 min; u16 max; }; /** * struct img_ir_symbol_timing - timing data for a symbol * @pulse: Timing range for the length of the pulse in this symbol * @space: Timing range for the length of the space in this symbol */ struct img_ir_symbol_timing { struct img_ir_timing_range pulse; struct img_ir_timing_range space; }; /** * struct img_ir_free_timing - timing data for free time symbol * @minlen: Minimum number of bits of data * @maxlen: Maximum number of bits of data * @ft_min: Minimum free time after message */ struct img_ir_free_timing { /* measured in bits */ u8 minlen; u8 maxlen; u16 ft_min; }; /** * struct img_ir_timings - Timing values. * @ldr: Leader symbol timing data * @s00: Zero symbol timing data for primary decoder * @s01: One symbol timing data for primary decoder * @s10: Zero symbol timing data for secondary (no leader symbol) decoder * @s11: One symbol timing data for secondary (no leader symbol) decoder * @ft: Free time symbol timing data */ struct img_ir_timings { struct img_ir_symbol_timing ldr, s00, s01, s10, s11; struct img_ir_free_timing ft; }; /** * struct img_ir_filter - Filter IR events. * @data: Data to match. * @mask: Mask of bits to compare. * @minlen: Additional minimum number of bits. * @maxlen: Additional maximum number of bits. */ struct img_ir_filter { u64 data; u64 mask; u8 minlen; u8 maxlen; }; /** * struct img_ir_timing_regvals - Calculated timing register values. * @ldr: Leader symbol timing register value * @s00: Zero symbol timing register value for primary decoder * @s01: One symbol timing register value for primary decoder * @s10: Zero symbol timing register value for secondary decoder * @s11: One symbol timing register value for secondary decoder * @ft: Free time symbol timing register value */ struct img_ir_timing_regvals { u32 ldr, s00, s01, s10, s11, ft; }; #define IMG_IR_SCANCODE 0 /* new scancode */ #define IMG_IR_REPEATCODE 1 /* repeat the previous code */ /** * struct img_ir_decoder - Decoder settings for an IR protocol. * @type: Protocol types bitmap. * @tolerance: Timing tolerance as a percentage (default 10%). * @unit: Unit of timings in nanoseconds (default 1 us). * @timings: Primary timings * @rtimings: Additional override timings while waiting for repeats. * @repeat: Maximum repeat interval (always in milliseconds). * @control: Control flags. * * @scancode: Pointer to function to convert the IR data into a scancode (it * must be safe to execute in interrupt context). * Returns IMG_IR_SCANCODE to emit new scancode. * Returns IMG_IR_REPEATCODE to repeat previous code. * Returns -errno (e.g. -EINVAL) on error. * @filter: Pointer to function to convert scancode filter to raw hardware * filter. The minlen and maxlen fields will have been initialised * to the maximum range. */ struct img_ir_decoder { /* core description */ u64 type; unsigned int tolerance; unsigned int unit; struct img_ir_timings timings; struct img_ir_timings rtimings; unsigned int repeat; struct img_ir_control control; /* scancode logic */ int (*scancode)(int len, u64 raw, enum rc_type *protocol, u32 *scancode, u64 enabled_protocols); int (*filter)(const struct rc_scancode_filter *in, struct img_ir_filter *out, u64 protocols); }; /** * struct img_ir_reg_timings - Reg values for decoder timings at clock rate. * @ctrl: Processed control register value. * @timings: Processed primary timings. * @rtimings: Processed repeat timings. */ struct img_ir_reg_timings { u32 ctrl; struct img_ir_timing_regvals timings; struct img_ir_timing_regvals rtimings; }; int img_ir_register_decoder(struct img_ir_decoder *dec); void img_ir_unregister_decoder(struct img_ir_decoder *dec); struct img_ir_priv; #ifdef CONFIG_IR_IMG_HW enum img_ir_mode { IMG_IR_M_NORMAL, IMG_IR_M_REPEATING, #ifdef CONFIG_PM_SLEEP IMG_IR_M_WAKE, #endif }; /** * struct img_ir_priv_hw - Private driver data for hardware decoder. * @ct_quirks: Quirk bits for each code type. * @rdev: Remote control device * @clk_nb: Notifier block for clock notify events. * @end_timer: Timer until repeat timeout. * @decoder: Current decoder settings. * @enabled_protocols: Currently enabled protocols. * @clk_hz: Current core clock rate in Hz. * @reg_timings: Timing reg values for decoder at clock rate. * @flags: IMG_IR_F_*. * @filters: HW filters (derived from scancode filters). * @mode: Current decode mode. * @suspend_irqen: Saved IRQ enable mask over suspend. */ struct img_ir_priv_hw { unsigned int ct_quirks[4]; struct rc_dev *rdev; struct notifier_block clk_nb; struct timer_list end_timer; const struct img_ir_decoder *decoder; u64 enabled_protocols; unsigned long clk_hz; struct img_ir_reg_timings reg_timings; unsigned int flags; struct img_ir_filter filters[RC_FILTER_MAX]; enum img_ir_mode mode; u32 suspend_irqen; }; static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) { return hw->rdev; }; void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status); void img_ir_setup_hw(struct img_ir_priv *priv); int img_ir_probe_hw(struct img_ir_priv *priv); void img_ir_remove_hw(struct img_ir_priv *priv); #ifdef CONFIG_PM_SLEEP int img_ir_suspend(struct device *dev); int img_ir_resume(struct device *dev); #else #define img_ir_suspend NULL #define img_ir_resume NULL #endif #else struct img_ir_priv_hw { }; static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) { return false; }; static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) { } static inline void img_ir_setup_hw(struct img_ir_priv *priv) { } static inline int img_ir_probe_hw(struct img_ir_priv *priv) { return -ENODEV; } static inline void img_ir_remove_hw(struct img_ir_priv *priv) { } #define img_ir_suspend NULL #define img_ir_resume NULL #endif /* CONFIG_IR_IMG_HW */ #endif /* _IMG_IR_HW_H_ */