#ifndef _IEEE1394_HOSTS_H #define _IEEE1394_HOSTS_H #include <linux/device.h> #include <linux/list.h> #include <linux/timer.h> #include <linux/types.h> #include <linux/workqueue.h> #include <asm/atomic.h> struct pci_dev; struct module; #include "ieee1394_types.h" #include "csr.h" struct hpsb_packet; struct hpsb_iso; struct hpsb_host { struct list_head host_list; void *hostdata; atomic_t generation; struct list_head pending_packets; struct timer_list timeout; unsigned long timeout_interval; int node_count; /* number of identified nodes on this bus */ int selfid_count; /* total number of SelfIDs received */ int nodes_active; /* number of nodes with active link layer */ nodeid_t node_id; /* node ID of this host */ nodeid_t irm_id; /* ID of this bus' isochronous resource manager */ nodeid_t busmgr_id; /* ID of this bus' bus manager */ /* this nodes state */ unsigned in_bus_reset:1; unsigned is_shutdown:1; unsigned resume_packet_sent:1; /* this nodes' duties on the bus */ unsigned is_root:1; unsigned is_cycmst:1; unsigned is_irm:1; unsigned is_busmgr:1; int reset_retries; quadlet_t *topology_map; u8 *speed_map; int id; struct hpsb_host_driver *driver; struct pci_dev *pdev; struct device device; struct device host_dev; struct delayed_work delayed_reset; unsigned config_roms:31; unsigned update_config_rom:1; struct list_head addr_space; u64 low_addr_space; /* upper bound of physical DMA area */ u64 middle_addr_space; /* upper bound of posted write area */ u8 speed[ALL_NODES]; /* speed between each node and local node */ /* per node tlabel allocation */ u8 next_tl[ALL_NODES]; struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES]; struct csr_control csr; }; enum devctl_cmd { /* Host is requested to reset its bus and cancel all outstanding async * requests. If arg == 1, it shall also attempt to become root on the * bus. Return void. */ RESET_BUS, /* Arg is void, return value is the hardware cycle counter value. */ GET_CYCLE_COUNTER, /* Set the hardware cycle counter to the value in arg, return void. * FIXME - setting is probably not required. */ SET_CYCLE_COUNTER, /* Configure hardware for new bus ID in arg, return void. */ SET_BUS_ID, /* If arg true, start sending cycle start packets, stop if arg == 0. * Return void. */ ACT_CYCLE_MASTER, /* Cancel all outstanding async requests without resetting the bus. * Return void. */ CANCEL_REQUESTS, }; enum isoctl_cmd { /* rawiso API - see iso.h for the meanings of these commands * (they correspond exactly to the hpsb_iso_* API functions) * INIT = allocate resources * START = begin transmission/reception * STOP = halt transmission/reception * QUEUE/RELEASE = produce/consume packets * SHUTDOWN = deallocate resources */ XMIT_INIT, XMIT_START, XMIT_STOP, XMIT_QUEUE, XMIT_SHUTDOWN, RECV_INIT, RECV_LISTEN_CHANNEL, /* multi-channel only */ RECV_UNLISTEN_CHANNEL, /* multi-channel only */ RECV_SET_CHANNEL_MASK, /* multi-channel only; arg is a *u64 */ RECV_START, RECV_STOP, RECV_RELEASE, RECV_SHUTDOWN, RECV_FLUSH }; enum reset_types { /* 166 microsecond reset -- only type of reset available on non-1394a capable controllers */ LONG_RESET, /* Short (arbitrated) reset -- only available on 1394a capable controllers */ SHORT_RESET, /* Variants that set force_root before issueing the bus reset */ LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT, /* Variants that clear force_root before issueing the bus reset */ LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT }; struct hpsb_host_driver { struct module *owner; const char *name; /* The hardware driver may optionally support a function that is used * to set the hardware ConfigROM if the hardware supports handling * reads to the ConfigROM on its own. */ void (*set_hw_config_rom)(struct hpsb_host *host, quadlet_t *config_rom); /* This function shall implement packet transmission based on * packet->type. It shall CRC both parts of the packet (unless * packet->type == raw) and do byte-swapping as necessary or instruct * the hardware to do so. It can return immediately after the packet * was queued for sending. After sending, hpsb_sent_packet() has to be * called. Return 0 on success, negative errno on failure. * NOTE: The function must be callable in interrupt context. */ int (*transmit_packet)(struct hpsb_host *host, struct hpsb_packet *packet); /* This function requests miscellanous services from the driver, see * above for command codes and expected actions. Return -1 for unknown * command, though that should never happen. */ int (*devctl)(struct hpsb_host *host, enum devctl_cmd command, int arg); /* ISO transmission/reception functions. Return 0 on success, -1 * (or -EXXX errno code) on failure. If the low-level driver does not * support the new ISO API, set isoctl to NULL. */ int (*isoctl)(struct hpsb_iso *iso, enum isoctl_cmd command, unsigned long arg); /* This function is mainly to redirect local CSR reads/locks to the iso * management registers (bus manager id, bandwidth available, channels * available) to the hardware registers in OHCI. reg is 0,1,2,3 for bus * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids * as OHCI uses). data and compare are the new data and expected data * respectively, return value is the old value. */ quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg, quadlet_t data, quadlet_t compare); }; struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra, struct device *dev); int hpsb_add_host(struct hpsb_host *host); void hpsb_resume_host(struct hpsb_host *host); void hpsb_remove_host(struct hpsb_host *host); int hpsb_update_config_rom_image(struct hpsb_host *host); #endif /* _IEEE1394_HOSTS_H */