/* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #ifndef _I915_REG_H_ #define _I915_REG_H_ #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) #define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a))) #define _PORT(port, a, b) ((a) + (port)*((b)-(a))) #define _PIPE3(pipe, a, b, c) ((pipe) == PIPE_A ? (a) : \ (pipe) == PIPE_B ? (b) : (c)) #define _MASKED_BIT_ENABLE(a) (((a) << 16) | (a)) #define _MASKED_BIT_DISABLE(a) ((a) << 16) /* PCI config space */ #define HPLLCC 0xc0 /* 855 only */ #define GC_CLOCK_CONTROL_MASK (0xf << 0) #define GC_CLOCK_133_200 (0 << 0) #define GC_CLOCK_100_200 (1 << 0) #define GC_CLOCK_100_133 (2 << 0) #define GC_CLOCK_166_250 (3 << 0) #define GCFGC2 0xda #define GCFGC 0xf0 /* 915+ only */ #define GC_LOW_FREQUENCY_ENABLE (1 << 7) #define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) #define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) #define GC_DISPLAY_CLOCK_267_MHZ_PNV (0 << 4) #define GC_DISPLAY_CLOCK_333_MHZ_PNV (1 << 4) #define GC_DISPLAY_CLOCK_444_MHZ_PNV (2 << 4) #define GC_DISPLAY_CLOCK_200_MHZ_PNV (5 << 4) #define GC_DISPLAY_CLOCK_133_MHZ_PNV (6 << 4) #define GC_DISPLAY_CLOCK_167_MHZ_PNV (7 << 4) #define GC_DISPLAY_CLOCK_MASK (7 << 4) #define GM45_GC_RENDER_CLOCK_MASK (0xf << 0) #define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0) #define GM45_GC_RENDER_CLOCK_320_MHZ (9 << 0) #define GM45_GC_RENDER_CLOCK_400_MHZ (0xb << 0) #define GM45_GC_RENDER_CLOCK_533_MHZ (0xc << 0) #define I965_GC_RENDER_CLOCK_MASK (0xf << 0) #define I965_GC_RENDER_CLOCK_267_MHZ (2 << 0) #define I965_GC_RENDER_CLOCK_333_MHZ (3 << 0) #define I965_GC_RENDER_CLOCK_444_MHZ (4 << 0) #define I965_GC_RENDER_CLOCK_533_MHZ (5 << 0) #define I945_GC_RENDER_CLOCK_MASK (7 << 0) #define I945_GC_RENDER_CLOCK_166_MHZ (0 << 0) #define I945_GC_RENDER_CLOCK_200_MHZ (1 << 0) #define I945_GC_RENDER_CLOCK_250_MHZ (3 << 0) #define I945_GC_RENDER_CLOCK_400_MHZ (5 << 0) #define I915_GC_RENDER_CLOCK_MASK (7 << 0) #define I915_GC_RENDER_CLOCK_166_MHZ (0 << 0) #define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0) #define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0) #define PCI_LBPC 0xf4 /* legacy/combination backlight modes, also called LBB */ /* Graphics reset regs */ #define I965_GDRST 0xc0 /* PCI config register */ #define GRDOM_FULL (0<<2) #define GRDOM_RENDER (1<<2) #define GRDOM_MEDIA (3<<2) #define GRDOM_MASK (3<<2) #define GRDOM_RESET_ENABLE (1<<0) #define ILK_GDSR 0x2ca4 /* MCHBAR offset */ #define ILK_GRDOM_FULL (0<<1) #define ILK_GRDOM_RENDER (1<<1) #define ILK_GRDOM_MEDIA (3<<1) #define ILK_GRDOM_MASK (3<<1) #define ILK_GRDOM_RESET_ENABLE (1<<0) #define GEN6_MBCUNIT_SNPCR 0x900c /* for LLC config */ #define GEN6_MBC_SNPCR_SHIFT 21 #define GEN6_MBC_SNPCR_MASK (3<<21) #define GEN6_MBC_SNPCR_MAX (0<<21) #define GEN6_MBC_SNPCR_MED (1<<21) #define GEN6_MBC_SNPCR_LOW (2<<21) #define GEN6_MBC_SNPCR_MIN (3<<21) /* only 1/16th of the cache is shared */ #define VLV_G3DCTL 0x9024 #define VLV_GSCKGCTL 0x9028 #define GEN6_MBCTL 0x0907c #define GEN6_MBCTL_ENABLE_BOOT_FETCH (1 << 4) #define GEN6_MBCTL_CTX_FETCH_NEEDED (1 << 3) #define GEN6_MBCTL_BME_UPDATE_ENABLE (1 << 2) #define GEN6_MBCTL_MAE_UPDATE_ENABLE (1 << 1) #define GEN6_MBCTL_BOOT_FETCH_MECH (1 << 0) #define GEN6_GDRST 0x941c #define GEN6_GRDOM_FULL (1 << 0) #define GEN6_GRDOM_RENDER (1 << 1) #define GEN6_GRDOM_MEDIA (1 << 2) #define GEN6_GRDOM_BLT (1 << 3) #define RING_PP_DIR_BASE(ring) ((ring)->mmio_base+0x228) #define RING_PP_DIR_BASE_READ(ring) ((ring)->mmio_base+0x518) #define RING_PP_DIR_DCLV(ring) ((ring)->mmio_base+0x220) #define PP_DIR_DCLV_2G 0xffffffff #define GEN8_RING_PDP_UDW(ring, n) ((ring)->mmio_base+0x270 + ((n) * 8 + 4)) #define GEN8_RING_PDP_LDW(ring, n) ((ring)->mmio_base+0x270 + (n) * 8) #define GAM_ECOCHK 0x4090 #define ECOCHK_SNB_BIT (1<<10) #define HSW_ECOCHK_ARB_PRIO_SOL (1<<6) #define ECOCHK_PPGTT_CACHE64B (0x3<<3) #define ECOCHK_PPGTT_CACHE4B (0x0<<3) #define ECOCHK_PPGTT_GFDT_IVB (0x1<<4) #define ECOCHK_PPGTT_LLC_IVB (0x1<<3) #define ECOCHK_PPGTT_UC_HSW (0x1<<3) #define ECOCHK_PPGTT_WT_HSW (0x2<<3) #define ECOCHK_PPGTT_WB_HSW (0x3<<3) #define GAC_ECO_BITS 0x14090 #define ECOBITS_SNB_BIT (1<<13) #define ECOBITS_PPGTT_CACHE64B (3<<8) #define ECOBITS_PPGTT_CACHE4B (0<<8) #define GAB_CTL 0x24000 #define GAB_CTL_CONT_AFTER_PAGEFAULT (1<<8) /* VGA stuff */ #define VGA_ST01_MDA 0x3ba #define VGA_ST01_CGA 0x3da #define VGA_MSR_WRITE 0x3c2 #define VGA_MSR_READ 0x3cc #define VGA_MSR_MEM_EN (1<<1) #define VGA_MSR_CGA_MODE (1<<0) #define VGA_SR_INDEX 0x3c4 #define SR01 1 #define VGA_SR_DATA 0x3c5 #define VGA_AR_INDEX 0x3c0 #define VGA_AR_VID_EN (1<<5) #define VGA_AR_DATA_WRITE 0x3c0 #define VGA_AR_DATA_READ 0x3c1 #define VGA_GR_INDEX 0x3ce #define VGA_GR_DATA 0x3cf /* GR05 */ #define VGA_GR_MEM_READ_MODE_SHIFT 3 #define VGA_GR_MEM_READ_MODE_PLANE 1 /* GR06 */ #define VGA_GR_MEM_MODE_MASK 0xc #define VGA_GR_MEM_MODE_SHIFT 2 #define VGA_GR_MEM_A0000_AFFFF 0 #define VGA_GR_MEM_A0000_BFFFF 1 #define VGA_GR_MEM_B0000_B7FFF 2 #define VGA_GR_MEM_B0000_BFFFF 3 #define VGA_DACMASK 0x3c6 #define VGA_DACRX 0x3c7 #define VGA_DACWX 0x3c8 #define VGA_DACDATA 0x3c9 #define VGA_CR_INDEX_MDA 0x3b4 #define VGA_CR_DATA_MDA 0x3b5 #define VGA_CR_INDEX_CGA 0x3d4 #define VGA_CR_DATA_CGA 0x3d5 /* * Instruction field definitions used by the command parser */ #define INSTR_CLIENT_SHIFT 29 #define INSTR_CLIENT_MASK 0xE0000000 #define INSTR_MI_CLIENT 0x0 #define INSTR_BC_CLIENT 0x2 #define INSTR_RC_CLIENT 0x3 #define INSTR_SUBCLIENT_SHIFT 27 #define INSTR_SUBCLIENT_MASK 0x18000000 #define INSTR_MEDIA_SUBCLIENT 0x2 /* * Memory interface instructions used by the kernel */ #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) /* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */ #define MI_GLOBAL_GTT (1<<22) #define MI_NOOP MI_INSTR(0, 0) #define MI_USER_INTERRUPT MI_INSTR(0x02, 0) #define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0) #define MI_WAIT_FOR_OVERLAY_FLIP (1<<16) #define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) #define MI_FLUSH MI_INSTR(0x04, 0) #define MI_READ_FLUSH (1 << 0) #define MI_EXE_FLUSH (1 << 1) #define MI_NO_WRITE_FLUSH (1 << 2) #define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ #define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ #define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */ #define MI_REPORT_HEAD MI_INSTR(0x07, 0) #define MI_ARB_ON_OFF MI_INSTR(0x08, 0) #define MI_ARB_ENABLE (1<<0) #define MI_ARB_DISABLE (0<<0) #define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) #define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0) #define MI_SUSPEND_FLUSH_EN (1<<0) #define MI_OVERLAY_FLIP MI_INSTR(0x11, 0) #define MI_OVERLAY_CONTINUE (0x0<<21) #define MI_OVERLAY_ON (0x1<<21) #define MI_OVERLAY_OFF (0x2<<21) #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0) #define MI_DISPLAY_FLIP MI_INSTR(0x14, 2) #define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1) #define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20) /* IVB has funny definitions for which plane to flip. */ #define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19) #define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19) #define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19) #define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19) #define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19) #define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) #define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1) /* gen6, gen7 */ #define MI_SEMAPHORE_GLOBAL_GTT (1<<22) #define MI_SEMAPHORE_UPDATE (1<<21) #define MI_SEMAPHORE_COMPARE (1<<20) #define MI_SEMAPHORE_REGISTER (1<<18) #define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */ #define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */ #define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */ #define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */ #define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */ #define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */ #define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */ #define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */ #define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */ #define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ #define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ #define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ #define MI_SEMAPHORE_SYNC_INVALID (3<<16) #define MI_SEMAPHORE_SYNC_MASK (3<<16) #define MI_SET_CONTEXT MI_INSTR(0x18, 0) #define MI_MM_SPACE_GTT (1<<8) #define MI_MM_SPACE_PHYSICAL (0<<8) #define MI_SAVE_EXT_STATE_EN (1<<3) #define MI_RESTORE_EXT_STATE_EN (1<<2) #define MI_FORCE_RESTORE (1<<1) #define MI_RESTORE_INHIBIT (1<<0) #define MI_SEMAPHORE_SIGNAL MI_INSTR(0x1b, 0) /* GEN8+ */ #define MI_SEMAPHORE_TARGET(engine) ((engine)<<15) #define MI_SEMAPHORE_WAIT MI_INSTR(0x1c, 2) /* GEN8+ */ #define MI_SEMAPHORE_POLL (1<<15) #define MI_SEMAPHORE_SAD_GTE_SDD (1<<12) #define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) #define MI_STORE_DWORD_IMM_GEN8 MI_INSTR(0x20, 2) #define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */ #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) #define MI_STORE_DWORD_INDEX_SHIFT 2 /* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM: * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw * simply ignores the register load under certain conditions. * - One can actually load arbitrary many arbitrary registers: Simply issue x * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! */ #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1) #define MI_LRI_FORCE_POSTED (1<<12) #define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*(x)-1) #define MI_STORE_REGISTER_MEM_GEN8(x) MI_INSTR(0x24, 3*(x)-1) #define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) #define MI_FLUSH_DW_OP_STOREDW (1<<14) #define MI_FLUSH_DW_OP_MASK (3<<14) #define MI_FLUSH_DW_NOTIFY (1<<8) #define MI_INVALIDATE_BSD (1<<7) #define MI_FLUSH_DW_USE_GTT (1<<2) #define MI_FLUSH_DW_USE_PPGTT (0<<2) #define MI_BATCH_BUFFER MI_INSTR(0x30, 1) #define MI_BATCH_NON_SECURE (1) /* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */ #define MI_BATCH_NON_SECURE_I965 (1<<8) #define MI_BATCH_PPGTT_HSW (1<<8) #define MI_BATCH_NON_SECURE_HSW (1<<13) #define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) #define MI_BATCH_GTT (2<<6) /* aliased with (1<<7) on gen4 */ #define MI_BATCH_BUFFER_START_GEN8 MI_INSTR(0x31, 1) #define MI_PREDICATE_RESULT_2 (0x2214) #define LOWER_SLICE_ENABLED (1<<0) #define LOWER_SLICE_DISABLED (0<<0) /* * 3D instructions used by the kernel */ #define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags)) #define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) #define SC_ENABLE_MASK (0x1<<0) #define SC_ENABLE (0x1<<0) #define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) #define SCI_YMIN_MASK (0xffff<<16) #define SCI_XMIN_MASK (0xffff<<0) #define SCI_YMAX_MASK (0xffff<<16) #define SCI_XMAX_MASK (0xffff<<0) #define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) #define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) #define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) #define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) #define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) #define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) #define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) #define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) #define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) #define BLT_DEPTH_8 (0<<24) #define BLT_DEPTH_16_565 (1<<24) #define BLT_DEPTH_16_1555 (2<<24) #define BLT_DEPTH_32 (3<<24) #define BLT_ROP_GXCOPY (0xcc<<16) #define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */ #define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */ #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) #define ASYNC_FLIP (1<<22) #define DISPLAY_PLANE_A (0<<20) #define DISPLAY_PLANE_B (1<<20) #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) #define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ #define PIPE_CONTROL_MMIO_WRITE (1<<23) #define PIPE_CONTROL_STORE_DATA_INDEX (1<<21) #define PIPE_CONTROL_CS_STALL (1<<20) #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) #define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14) #define PIPE_CONTROL_DEPTH_STALL (1<<13) #define PIPE_CONTROL_WRITE_FLUSH (1<<12) #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */ #define PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE (1<<11) /* MBZ on Ironlake */ #define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1<<10) /* GM45+ only */ #define PIPE_CONTROL_INDIRECT_STATE_DISABLE (1<<9) #define PIPE_CONTROL_NOTIFY (1<<8) #define PIPE_CONTROL_FLUSH_ENABLE (1<<7) /* gen7+ */ #define PIPE_CONTROL_VF_CACHE_INVALIDATE (1<<4) #define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1<<3) #define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1<<2) #define PIPE_CONTROL_STALL_AT_SCOREBOARD (1<<1) #define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0) #define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */ /* * Commands used only by the command parser */ #define MI_SET_PREDICATE MI_INSTR(0x01, 0) #define MI_ARB_CHECK MI_INSTR(0x05, 0) #define MI_RS_CONTROL MI_INSTR(0x06, 0) #define MI_URB_ATOMIC_ALLOC MI_INSTR(0x09, 0) #define MI_PREDICATE MI_INSTR(0x0C, 0) #define MI_RS_CONTEXT MI_INSTR(0x0F, 0) #define MI_TOPOLOGY_FILTER MI_INSTR(0x0D, 0) #define MI_LOAD_SCAN_LINES_EXCL MI_INSTR(0x13, 0) #define MI_URB_CLEAR MI_INSTR(0x19, 0) #define MI_UPDATE_GTT MI_INSTR(0x23, 0) #define MI_CLFLUSH MI_INSTR(0x27, 0) #define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0) #define MI_REPORT_PERF_COUNT_GGTT (1<<0) #define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0) #define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0) #define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0) #define MI_LOAD_URB_MEM MI_INSTR(0x2C, 0) #define MI_STORE_URB_MEM MI_INSTR(0x2D, 0) #define MI_CONDITIONAL_BATCH_BUFFER_END MI_INSTR(0x36, 0) #define PIPELINE_SELECT ((0x3<<29)|(0x1<<27)|(0x1<<24)|(0x4<<16)) #define GFX_OP_3DSTATE_VF_STATISTICS ((0x3<<29)|(0x1<<27)|(0x0<<24)|(0xB<<16)) #define MEDIA_VFE_STATE ((0x3<<29)|(0x2<<27)|(0x0<<24)|(0x0<<16)) #define MEDIA_VFE_STATE_MMIO_ACCESS_MASK (0x18) #define GPGPU_OBJECT ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16)) #define GPGPU_WALKER ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16)) #define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x39<<16)) #define GFX_OP_3DSTATE_DX9_CONSTANTF_PS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x3A<<16)) #define GFX_OP_3DSTATE_SO_DECL_LIST \ ((0x3<<29)|(0x3<<27)|(0x1<<24)|(0x17<<16)) #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x43<<16)) #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x44<<16)) #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x45<<16)) #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x46<<16)) #define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS \ ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x47<<16)) #define MFX_WAIT ((0x3<<29)|(0x1<<27)|(0x0<<16)) #define COLOR_BLT ((0x2<<29)|(0x40<<22)) #define SRC_COPY_BLT ((0x2<<29)|(0x43<<22)) /* * Registers used only by the command parser */ #define BCS_SWCTRL 0x22200 #define HS_INVOCATION_COUNT 0x2300 #define DS_INVOCATION_COUNT 0x2308 #define IA_VERTICES_COUNT 0x2310 #define IA_PRIMITIVES_COUNT 0x2318 #define VS_INVOCATION_COUNT 0x2320 #define GS_INVOCATION_COUNT 0x2328 #define GS_PRIMITIVES_COUNT 0x2330 #define CL_INVOCATION_COUNT 0x2338 #define CL_PRIMITIVES_COUNT 0x2340 #define PS_INVOCATION_COUNT 0x2348 #define PS_DEPTH_COUNT 0x2350 /* There are the 4 64-bit counter registers, one for each stream output */ #define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) #define GEN7_SO_PRIM_STORAGE_NEEDED(n) (0x5240 + (n) * 8) #define GEN7_3DPRIM_END_OFFSET 0x2420 #define GEN7_3DPRIM_START_VERTEX 0x2430 #define GEN7_3DPRIM_VERTEX_COUNT 0x2434 #define GEN7_3DPRIM_INSTANCE_COUNT 0x2438 #define GEN7_3DPRIM_START_INSTANCE 0x243C #define GEN7_3DPRIM_BASE_VERTEX 0x2440 #define OACONTROL 0x2360 #define _GEN7_PIPEA_DE_LOAD_SL 0x70068 #define _GEN7_PIPEB_DE_LOAD_SL 0x71068 #define GEN7_PIPE_DE_LOAD_SL(pipe) _PIPE(pipe, \ _GEN7_PIPEA_DE_LOAD_SL, \ _GEN7_PIPEB_DE_LOAD_SL) /* * Reset registers */ #define DEBUG_RESET_I830 0x6070 #define DEBUG_RESET_FULL (1<<7) #define DEBUG_RESET_RENDER (1<<8) #define DEBUG_RESET_DISPLAY (1<<9) /* * IOSF sideband */ #define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100) #define IOSF_DEVFN_SHIFT 24 #define IOSF_OPCODE_SHIFT 16 #define IOSF_PORT_SHIFT 8 #define IOSF_BYTE_ENABLES_SHIFT 4 #define IOSF_BAR_SHIFT 1 #define IOSF_SB_BUSY (1<<0) #define IOSF_PORT_BUNIT 0x3 #define IOSF_PORT_PUNIT 0x4 #define IOSF_PORT_NC 0x11 #define IOSF_PORT_DPIO 0x12 #define IOSF_PORT_DPIO_2 0x1a #define IOSF_PORT_GPIO_NC 0x13 #define IOSF_PORT_CCK 0x14 #define IOSF_PORT_CCU 0xA9 #define IOSF_PORT_GPS_CORE 0x48 #define IOSF_PORT_FLISDSI 0x1B #define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104) #define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108) /* See configdb bunit SB addr map */ #define BUNIT_REG_BISOC 0x11 #define PUNIT_REG_DSPFREQ 0x36 #define DSPFREQSTAT_SHIFT_CHV 24 #define DSPFREQSTAT_MASK_CHV (0x1f << DSPFREQSTAT_SHIFT_CHV) #define DSPFREQGUAR_SHIFT_CHV 8 #define DSPFREQGUAR_MASK_CHV (0x1f << DSPFREQGUAR_SHIFT_CHV) #define DSPFREQSTAT_SHIFT 30 #define DSPFREQSTAT_MASK (0x3 << DSPFREQSTAT_SHIFT) #define DSPFREQGUAR_SHIFT 14 #define DSPFREQGUAR_MASK (0x3 << DSPFREQGUAR_SHIFT) #define _DP_SSC(val, pipe) ((val) << (2 * (pipe))) #define DP_SSC_MASK(pipe) _DP_SSC(0x3, (pipe)) #define DP_SSC_PWR_ON(pipe) _DP_SSC(0x0, (pipe)) #define DP_SSC_CLK_GATE(pipe) _DP_SSC(0x1, (pipe)) #define DP_SSC_RESET(pipe) _DP_SSC(0x2, (pipe)) #define DP_SSC_PWR_GATE(pipe) _DP_SSC(0x3, (pipe)) #define _DP_SSS(val, pipe) ((val) << (2 * (pipe) + 16)) #define DP_SSS_MASK(pipe) _DP_SSS(0x3, (pipe)) #define DP_SSS_PWR_ON(pipe) _DP_SSS(0x0, (pipe)) #define DP_SSS_CLK_GATE(pipe) _DP_SSS(0x1, (pipe)) #define DP_SSS_RESET(pipe) _DP_SSS(0x2, (pipe)) #define DP_SSS_PWR_GATE(pipe) _DP_SSS(0x3, (pipe)) /* See the PUNIT HAS v0.8 for the below bits */ enum punit_power_well { PUNIT_POWER_WELL_RENDER = 0, PUNIT_POWER_WELL_MEDIA = 1, PUNIT_POWER_WELL_DISP2D = 3, PUNIT_POWER_WELL_DPIO_CMN_BC = 5, PUNIT_POWER_WELL_DPIO_TX_B_LANES_01 = 6, PUNIT_POWER_WELL_DPIO_TX_B_LANES_23 = 7, PUNIT_POWER_WELL_DPIO_TX_C_LANES_01 = 8, PUNIT_POWER_WELL_DPIO_TX_C_LANES_23 = 9, PUNIT_POWER_WELL_DPIO_RX0 = 10, PUNIT_POWER_WELL_DPIO_RX1 = 11, PUNIT_POWER_WELL_DPIO_CMN_D = 12, /* FIXME: guesswork below */ PUNIT_POWER_WELL_DPIO_TX_D_LANES_01 = 13, PUNIT_POWER_WELL_DPIO_TX_D_LANES_23 = 14, PUNIT_POWER_WELL_DPIO_RX2 = 15, PUNIT_POWER_WELL_NUM, }; #define PUNIT_REG_PWRGT_CTRL 0x60 #define PUNIT_REG_PWRGT_STATUS 0x61 #define PUNIT_PWRGT_MASK(power_well) (3 << ((power_well) * 2)) #define PUNIT_PWRGT_PWR_ON(power_well) (0 << ((power_well) * 2)) #define PUNIT_PWRGT_CLK_GATE(power_well) (1 << ((power_well) * 2)) #define PUNIT_PWRGT_RESET(power_well) (2 << ((power_well) * 2)) #define PUNIT_PWRGT_PWR_GATE(power_well) (3 << ((power_well) * 2)) #define PUNIT_REG_GPU_LFM 0xd3 #define PUNIT_REG_GPU_FREQ_REQ 0xd4 #define PUNIT_REG_GPU_FREQ_STS 0xd8 #define GENFREQSTATUS (1<<0) #define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc #define PUNIT_REG_CZ_TIMESTAMP 0xce #define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */ #define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */ #define PUNIT_GPU_STATUS_REG 0xdb #define PUNIT_GPU_STATUS_MAX_FREQ_SHIFT 16 #define PUNIT_GPU_STATUS_MAX_FREQ_MASK 0xff #define PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT 8 #define PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK 0xff #define PUNIT_GPU_DUTYCYCLE_REG 0xdf #define PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT 8 #define PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK 0xff #define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c #define FB_GFX_MAX_FREQ_FUSE_SHIFT 3 #define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8 #define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11 #define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800 #define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34 #define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007 #define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30 #define FB_FMAX_VMIN_FREQ_LO_SHIFT 27 #define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000 #define VLV_CZ_CLOCK_TO_MILLI_SEC 100000 #define VLV_RP_UP_EI_THRESHOLD 90 #define VLV_RP_DOWN_EI_THRESHOLD 70 #define VLV_INT_COUNT_FOR_DOWN_EI 5 /* vlv2 north clock has */ #define CCK_FUSE_REG 0x8 #define CCK_FUSE_HPLL_FREQ_MASK 0x3 #define CCK_REG_DSI_PLL_FUSE 0x44 #define CCK_REG_DSI_PLL_CONTROL 0x48 #define DSI_PLL_VCO_EN (1 << 31) #define DSI_PLL_LDO_GATE (1 << 30) #define DSI_PLL_P1_POST_DIV_SHIFT 17 #define DSI_PLL_P1_POST_DIV_MASK (0x1ff << 17) #define DSI_PLL_P2_MUX_DSI0_DIV2 (1 << 13) #define DSI_PLL_P3_MUX_DSI1_DIV2 (1 << 12) #define DSI_PLL_MUX_MASK (3 << 9) #define DSI_PLL_MUX_DSI0_DSIPLL (0 << 10) #define DSI_PLL_MUX_DSI0_CCK (1 << 10) #define DSI_PLL_MUX_DSI1_DSIPLL (0 << 9) #define DSI_PLL_MUX_DSI1_CCK (1 << 9) #define DSI_PLL_CLK_GATE_MASK (0xf << 5) #define DSI_PLL_CLK_GATE_DSI0_DSIPLL (1 << 8) #define DSI_PLL_CLK_GATE_DSI1_DSIPLL (1 << 7) #define DSI_PLL_CLK_GATE_DSI0_CCK (1 << 6) #define DSI_PLL_CLK_GATE_DSI1_CCK (1 << 5) #define DSI_PLL_LOCK (1 << 0) #define CCK_REG_DSI_PLL_DIVIDER 0x4c #define DSI_PLL_LFSR (1 << 31) #define DSI_PLL_FRACTION_EN (1 << 30) #define DSI_PLL_FRAC_COUNTER_SHIFT 27 #define DSI_PLL_FRAC_COUNTER_MASK (7 << 27) #define DSI_PLL_USYNC_CNT_SHIFT 18 #define DSI_PLL_USYNC_CNT_MASK (0x1ff << 18) #define DSI_PLL_N1_DIV_SHIFT 16 #define DSI_PLL_N1_DIV_MASK (3 << 16) #define DSI_PLL_M1_DIV_SHIFT 0 #define DSI_PLL_M1_DIV_MASK (0x1ff << 0) #define CCK_DISPLAY_CLOCK_CONTROL 0x6b #define DISPLAY_TRUNK_FORCE_ON (1 << 17) #define DISPLAY_TRUNK_FORCE_OFF (1 << 16) #define DISPLAY_FREQUENCY_STATUS (0x1f << 8) #define DISPLAY_FREQUENCY_STATUS_SHIFT 8 #define DISPLAY_FREQUENCY_VALUES (0x1f << 0) /** * DOC: DPIO * * VLV and CHV have slightly peculiar display PHYs for driving DP/HDMI * ports. DPIO is the name given to such a display PHY. These PHYs * don't follow the standard programming model using direct MMIO * registers, and instead their registers must be accessed trough IOSF * sideband. VLV has one such PHY for driving ports B and C, and CHV * adds another PHY for driving port D. Each PHY responds to specific * IOSF-SB port. * * Each display PHY is made up of one or two channels. Each channel * houses a common lane part which contains the PLL and other common * logic. CH0 common lane also contains the IOSF-SB logic for the * Common Register Interface (CRI) ie. the DPIO registers. CRI clock * must be running when any DPIO registers are accessed. * * In addition to having their own registers, the PHYs are also * controlled through some dedicated signals from the display * controller. These include PLL reference clock enable, PLL enable, * and CRI clock selection, for example. * * Eeach channel also has two splines (also called data lanes), and * each spline is made up of one Physical Access Coding Sub-Layer * (PCS) block and two TX lanes. So each channel has two PCS blocks * and four TX lanes. The TX lanes are used as DP lanes or TMDS * data/clock pairs depending on the output type. * * Additionally the PHY also contains an AUX lane with AUX blocks * for each channel. This is used for DP AUX communication, but * this fact isn't really relevant for the driver since AUX is * controlled from the display controller side. No DPIO registers * need to be accessed during AUX communication, * * Generally the common lane corresponds to the pipe and * the spline (PCS/TX) correponds to the port. * * For dual channel PHY (VLV/CHV): * * pipe A == CMN/PLL/REF CH0 * * pipe B == CMN/PLL/REF CH1 * * port B == PCS/TX CH0 * * port C == PCS/TX CH1 * * This is especially important when we cross the streams * ie. drive port B with pipe B, or port C with pipe A. * * For single channel PHY (CHV): * * pipe C == CMN/PLL/REF CH0 * * port D == PCS/TX CH0 * * Note: digital port B is DDI0, digital port C is DDI1, * digital port D is DDI2 */ /* * Dual channel PHY (VLV/CHV) * --------------------------------- * | CH0 | CH1 | * | CMN/PLL/REF | CMN/PLL/REF | * |---------------|---------------| Display PHY * | PCS01 | PCS23 | PCS01 | PCS23 | * |-------|-------|-------|-------| * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| * --------------------------------- * | DDI0 | DDI1 | DP/HDMI ports * --------------------------------- * * Single channel PHY (CHV) * ----------------- * | CH0 | * | CMN/PLL/REF | * |---------------| Display PHY * | PCS01 | PCS23 | * |-------|-------| * |TX0|TX1|TX2|TX3| * ----------------- * | DDI2 | DP/HDMI port * ----------------- */ #define DPIO_DEVFN 0 #define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110) #define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ #define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ #define DPIO_SFR_BYPASS (1<<1) #define DPIO_CMNRST (1<<0) #define DPIO_PHY(pipe) ((pipe) >> 1) #define DPIO_PHY_IOSF_PORT(phy) (dev_priv->dpio_phy_iosf_port[phy]) /* * Per pipe/PLL DPIO regs */ #define _VLV_PLL_DW3_CH0 0x800c #define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ #define DPIO_POST_DIV_DAC 0 #define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */ #define DPIO_POST_DIV_LVDS1 2 #define DPIO_POST_DIV_LVDS2 3 #define DPIO_K_SHIFT (24) /* 4 bits */ #define DPIO_P1_SHIFT (21) /* 3 bits */ #define DPIO_P2_SHIFT (16) /* 5 bits */ #define DPIO_N_SHIFT (12) /* 4 bits */ #define DPIO_ENABLE_CALIBRATION (1<<11) #define DPIO_M1DIV_SHIFT (8) /* 3 bits */ #define DPIO_M2DIV_MASK 0xff #define _VLV_PLL_DW3_CH1 0x802c #define VLV_PLL_DW3(ch) _PIPE(ch, _VLV_PLL_DW3_CH0, _VLV_PLL_DW3_CH1) #define _VLV_PLL_DW5_CH0 0x8014 #define DPIO_REFSEL_OVERRIDE 27 #define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */ #define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */ #define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */ #define DPIO_PLL_REFCLK_SEL_MASK 3 #define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */ #define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */ #define _VLV_PLL_DW5_CH1 0x8034 #define VLV_PLL_DW5(ch) _PIPE(ch, _VLV_PLL_DW5_CH0, _VLV_PLL_DW5_CH1) #define _VLV_PLL_DW7_CH0 0x801c #define _VLV_PLL_DW7_CH1 0x803c #define VLV_PLL_DW7(ch) _PIPE(ch, _VLV_PLL_DW7_CH0, _VLV_PLL_DW7_CH1) #define _VLV_PLL_DW8_CH0 0x8040 #define _VLV_PLL_DW8_CH1 0x8060 #define VLV_PLL_DW8(ch) _PIPE(ch, _VLV_PLL_DW8_CH0, _VLV_PLL_DW8_CH1) #define VLV_PLL_DW9_BCAST 0xc044 #define _VLV_PLL_DW9_CH0 0x8044 #define _VLV_PLL_DW9_CH1 0x8064 #define VLV_PLL_DW9(ch) _PIPE(ch, _VLV_PLL_DW9_CH0, _VLV_PLL_DW9_CH1) #define _VLV_PLL_DW10_CH0 0x8048 #define _VLV_PLL_DW10_CH1 0x8068 #define VLV_PLL_DW10(ch) _PIPE(ch, _VLV_PLL_DW10_CH0, _VLV_PLL_DW10_CH1) #define _VLV_PLL_DW11_CH0 0x804c #define _VLV_PLL_DW11_CH1 0x806c #define VLV_PLL_DW11(ch) _PIPE(ch, _VLV_PLL_DW11_CH0, _VLV_PLL_DW11_CH1) /* Spec for ref block start counts at DW10 */ #define VLV_REF_DW13 0x80ac #define VLV_CMN_DW0 0x8100 /* * Per DDI channel DPIO regs */ #define _VLV_PCS_DW0_CH0 0x8200 #define _VLV_PCS_DW0_CH1 0x8400 #define DPIO_PCS_TX_LANE2_RESET (1<<16) #define DPIO_PCS_TX_LANE1_RESET (1<<7) #define VLV_PCS_DW0(ch) _PORT(ch, _VLV_PCS_DW0_CH0, _VLV_PCS_DW0_CH1) #define _VLV_PCS01_DW0_CH0 0x200 #define _VLV_PCS23_DW0_CH0 0x400 #define _VLV_PCS01_DW0_CH1 0x2600 #define _VLV_PCS23_DW0_CH1 0x2800 #define VLV_PCS01_DW0(ch) _PORT(ch, _VLV_PCS01_DW0_CH0, _VLV_PCS01_DW0_CH1) #define VLV_PCS23_DW0(ch) _PORT(ch, _VLV_PCS23_DW0_CH0, _VLV_PCS23_DW0_CH1) #define _VLV_PCS_DW1_CH0 0x8204 #define _VLV_PCS_DW1_CH1 0x8404 #define CHV_PCS_REQ_SOFTRESET_EN (1<<23) #define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22) #define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21) #define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6) #define DPIO_PCS_CLK_SOFT_RESET (1<<5) #define VLV_PCS_DW1(ch) _PORT(ch, _VLV_PCS_DW1_CH0, _VLV_PCS_DW1_CH1) #define _VLV_PCS01_DW1_CH0 0x204 #define _VLV_PCS23_DW1_CH0 0x404 #define _VLV_PCS01_DW1_CH1 0x2604 #define _VLV_PCS23_DW1_CH1 0x2804 #define VLV_PCS01_DW1(ch) _PORT(ch, _VLV_PCS01_DW1_CH0, _VLV_PCS01_DW1_CH1) #define VLV_PCS23_DW1(ch) _PORT(ch, _VLV_PCS23_DW1_CH0, _VLV_PCS23_DW1_CH1) #define _VLV_PCS_DW8_CH0 0x8220 #define _VLV_PCS_DW8_CH1 0x8420 #define CHV_PCS_USEDCLKCHANNEL_OVRRIDE (1 << 20) #define CHV_PCS_USEDCLKCHANNEL (1 << 21) #define VLV_PCS_DW8(ch) _PORT(ch, _VLV_PCS_DW8_CH0, _VLV_PCS_DW8_CH1) #define _VLV_PCS01_DW8_CH0 0x0220 #define _VLV_PCS23_DW8_CH0 0x0420 #define _VLV_PCS01_DW8_CH1 0x2620 #define _VLV_PCS23_DW8_CH1 0x2820 #define VLV_PCS01_DW8(port) _PORT(port, _VLV_PCS01_DW8_CH0, _VLV_PCS01_DW8_CH1) #define VLV_PCS23_DW8(port) _PORT(port, _VLV_PCS23_DW8_CH0, _VLV_PCS23_DW8_CH1) #define _VLV_PCS_DW9_CH0 0x8224 #define _VLV_PCS_DW9_CH1 0x8424 #define VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1) #define _CHV_PCS_DW10_CH0 0x8228 #define _CHV_PCS_DW10_CH1 0x8428 #define DPIO_PCS_SWING_CALC_TX0_TX2 (1<<30) #define DPIO_PCS_SWING_CALC_TX1_TX3 (1<<31) #define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1) #define _VLV_PCS01_DW10_CH0 0x0228 #define _VLV_PCS23_DW10_CH0 0x0428 #define _VLV_PCS01_DW10_CH1 0x2628 #define _VLV_PCS23_DW10_CH1 0x2828 #define VLV_PCS01_DW10(port) _PORT(port, _VLV_PCS01_DW10_CH0, _VLV_PCS01_DW10_CH1) #define VLV_PCS23_DW10(port) _PORT(port, _VLV_PCS23_DW10_CH0, _VLV_PCS23_DW10_CH1) #define _VLV_PCS_DW11_CH0 0x822c #define _VLV_PCS_DW11_CH1 0x842c #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1) #define _VLV_PCS_DW12_CH0 0x8230 #define _VLV_PCS_DW12_CH1 0x8430 #define VLV_PCS_DW12(ch) _PORT(ch, _VLV_PCS_DW12_CH0, _VLV_PCS_DW12_CH1) #define _VLV_PCS_DW14_CH0 0x8238 #define _VLV_PCS_DW14_CH1 0x8438 #define VLV_PCS_DW14(ch) _PORT(ch, _VLV_PCS_DW14_CH0, _VLV_PCS_DW14_CH1) #define _VLV_PCS_DW23_CH0 0x825c #define _VLV_PCS_DW23_CH1 0x845c #define VLV_PCS_DW23(ch) _PORT(ch, _VLV_PCS_DW23_CH0, _VLV_PCS_DW23_CH1) #define _VLV_TX_DW2_CH0 0x8288 #define _VLV_TX_DW2_CH1 0x8488 #define DPIO_SWING_MARGIN000_SHIFT 16 #define DPIO_SWING_MARGIN000_MASK (0xff << DPIO_SWING_MARGIN000_SHIFT) #define DPIO_UNIQ_TRANS_SCALE_SHIFT 8 #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1) #define _VLV_TX_DW3_CH0 0x828c #define _VLV_TX_DW3_CH1 0x848c /* The following bit for CHV phy */ #define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27) #define DPIO_SWING_MARGIN101_SHIFT 16 #define DPIO_SWING_MARGIN101_MASK (0xff << DPIO_SWING_MARGIN101_SHIFT) #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1) #define _VLV_TX_DW4_CH0 0x8290 #define _VLV_TX_DW4_CH1 0x8490 #define DPIO_SWING_DEEMPH9P5_SHIFT 24 #define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT) #define DPIO_SWING_DEEMPH6P0_SHIFT 16 #define DPIO_SWING_DEEMPH6P0_MASK (0xff << DPIO_SWING_DEEMPH6P0_SHIFT) #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1) #define _VLV_TX3_DW4_CH0 0x690 #define _VLV_TX3_DW4_CH1 0x2a90 #define VLV_TX3_DW4(ch) _PORT(ch, _VLV_TX3_DW4_CH0, _VLV_TX3_DW4_CH1) #define _VLV_TX_DW5_CH0 0x8294 #define _VLV_TX_DW5_CH1 0x8494 #define DPIO_TX_OCALINIT_EN (1<<31) #define VLV_TX_DW5(ch) _PORT(ch, _VLV_TX_DW5_CH0, _VLV_TX_DW5_CH1) #define _VLV_TX_DW11_CH0 0x82ac #define _VLV_TX_DW11_CH1 0x84ac #define VLV_TX_DW11(ch) _PORT(ch, _VLV_TX_DW11_CH0, _VLV_TX_DW11_CH1) #define _VLV_TX_DW14_CH0 0x82b8 #define _VLV_TX_DW14_CH1 0x84b8 #define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1) /* CHV dpPhy registers */ #define _CHV_PLL_DW0_CH0 0x8000 #define _CHV_PLL_DW0_CH1 0x8180 #define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1) #define _CHV_PLL_DW1_CH0 0x8004 #define _CHV_PLL_DW1_CH1 0x8184 #define DPIO_CHV_N_DIV_SHIFT 8 #define DPIO_CHV_M1_DIV_BY_2 (0 << 0) #define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1) #define _CHV_PLL_DW2_CH0 0x8008 #define _CHV_PLL_DW2_CH1 0x8188 #define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1) #define _CHV_PLL_DW3_CH0 0x800c #define _CHV_PLL_DW3_CH1 0x818c #define DPIO_CHV_FRAC_DIV_EN (1 << 16) #define DPIO_CHV_FIRST_MOD (0 << 8) #define DPIO_CHV_SECOND_MOD (1 << 8) #define DPIO_CHV_FEEDFWD_GAIN_SHIFT 0 #define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1) #define _CHV_PLL_DW6_CH0 0x8018 #define _CHV_PLL_DW6_CH1 0x8198 #define DPIO_CHV_GAIN_CTRL_SHIFT 16 #define DPIO_CHV_INT_COEFF_SHIFT 8 #define DPIO_CHV_PROP_COEFF_SHIFT 0 #define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1) #define _CHV_CMN_DW5_CH0 0x8114 #define CHV_BUFRIGHTENA1_DISABLE (0 << 20) #define CHV_BUFRIGHTENA1_NORMAL (1 << 20) #define CHV_BUFRIGHTENA1_FORCE (3 << 20) #define CHV_BUFRIGHTENA1_MASK (3 << 20) #define CHV_BUFLEFTENA1_DISABLE (0 << 22) #define CHV_BUFLEFTENA1_NORMAL (1 << 22) #define CHV_BUFLEFTENA1_FORCE (3 << 22) #define CHV_BUFLEFTENA1_MASK (3 << 22) #define _CHV_CMN_DW13_CH0 0x8134 #define _CHV_CMN_DW0_CH1 0x8080 #define DPIO_CHV_S1_DIV_SHIFT 21 #define DPIO_CHV_P1_DIV_SHIFT 13 /* 3 bits */ #define DPIO_CHV_P2_DIV_SHIFT 8 /* 5 bits */ #define DPIO_CHV_K_DIV_SHIFT 4 #define DPIO_PLL_FREQLOCK (1 << 1) #define DPIO_PLL_LOCK (1 << 0) #define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1) #define _CHV_CMN_DW14_CH0 0x8138 #define _CHV_CMN_DW1_CH1 0x8084 #define DPIO_AFC_RECAL (1 << 14) #define DPIO_DCLKP_EN (1 << 13) #define CHV_BUFLEFTENA2_DISABLE (0 << 17) /* CL2 DW1 only */ #define CHV_BUFLEFTENA2_NORMAL (1 << 17) /* CL2 DW1 only */ #define CHV_BUFLEFTENA2_FORCE (3 << 17) /* CL2 DW1 only */ #define CHV_BUFLEFTENA2_MASK (3 << 17) /* CL2 DW1 only */ #define CHV_BUFRIGHTENA2_DISABLE (0 << 19) /* CL2 DW1 only */ #define CHV_BUFRIGHTENA2_NORMAL (1 << 19) /* CL2 DW1 only */ #define CHV_BUFRIGHTENA2_FORCE (3 << 19) /* CL2 DW1 only */ #define CHV_BUFRIGHTENA2_MASK (3 << 19) /* CL2 DW1 only */ #define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1) #define _CHV_CMN_DW19_CH0 0x814c #define _CHV_CMN_DW6_CH1 0x8098 #define CHV_CMN_USEDCLKCHANNEL (1 << 13) #define CHV_CMN_DW19(ch) _PIPE(ch, _CHV_CMN_DW19_CH0, _CHV_CMN_DW6_CH1) #define CHV_CMN_DW30 0x8178 #define DPIO_LRC_BYPASS (1 << 3) #define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \ (lane) * 0x200 + (offset)) #define CHV_TX_DW0(ch, lane) _TXLANE(ch, lane, 0x80) #define CHV_TX_DW1(ch, lane) _TXLANE(ch, lane, 0x84) #define CHV_TX_DW2(ch, lane) _TXLANE(ch, lane, 0x88) #define CHV_TX_DW3(ch, lane) _TXLANE(ch, lane, 0x8c) #define CHV_TX_DW4(ch, lane) _TXLANE(ch, lane, 0x90) #define CHV_TX_DW5(ch, lane) _TXLANE(ch, lane, 0x94) #define CHV_TX_DW6(ch, lane) _TXLANE(ch, lane, 0x98) #define CHV_TX_DW7(ch, lane) _TXLANE(ch, lane, 0x9c) #define CHV_TX_DW8(ch, lane) _TXLANE(ch, lane, 0xa0) #define CHV_TX_DW9(ch, lane) _TXLANE(ch, lane, 0xa4) #define CHV_TX_DW10(ch, lane) _TXLANE(ch, lane, 0xa8) #define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac) #define DPIO_FRC_LATENCY_SHFIT 8 #define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8) #define DPIO_UPAR_SHIFT 30 /* * Fence registers */ #define FENCE_REG_830_0 0x2000 #define FENCE_REG_945_8 0x3000 #define I830_FENCE_START_MASK 0x07f80000 #define I830_FENCE_TILING_Y_SHIFT 12 #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) #define I915_FENCE_MAX_PITCH_VAL 4 #define I830_FENCE_MAX_PITCH_VAL 6 #define I830_FENCE_MAX_SIZE_VAL (1<<8) #define I915_FENCE_START_MASK 0x0ff00000 #define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8) #define FENCE_REG_965_0 0x03000 #define I965_FENCE_PITCH_SHIFT 2 #define I965_FENCE_TILING_Y_SHIFT 1 #define I965_FENCE_REG_VALID (1<<0) #define I965_FENCE_MAX_PITCH_VAL 0x0400 #define FENCE_REG_SANDYBRIDGE_0 0x100000 #define SANDYBRIDGE_FENCE_PITCH_SHIFT 32 #define GEN7_FENCE_MAX_PITCH_VAL 0x0800 /* control register for cpu gtt access */ #define TILECTL 0x101000 #define TILECTL_SWZCTL (1 << 0) #define TILECTL_TLB_PREFETCH_DIS (1 << 2) #define TILECTL_BACKSNOOP_DIS (1 << 3) /* * Instruction and interrupt control regs */ #define PGTBL_CTL 0x02020 #define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */ #define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */ #define PGTBL_ER 0x02024 #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 #define GEN6_BSD_RING_BASE 0x12000 #define GEN8_BSD2_RING_BASE 0x1c000 #define VEBOX_RING_BASE 0x1a000 #define BLT_RING_BASE 0x22000 #define RING_TAIL(base) ((base)+0x30) #define RING_HEAD(base) ((base)+0x34) #define RING_START(base) ((base)+0x38) #define RING_CTL(base) ((base)+0x3c) #define RING_SYNC_0(base) ((base)+0x40) #define RING_SYNC_1(base) ((base)+0x44) #define RING_SYNC_2(base) ((base)+0x48) #define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE)) #define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE)) #define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE)) #define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE)) #define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE)) #define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE)) #define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE)) #define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE)) #define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE)) #define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE)) #define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE)) #define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE)) #define GEN6_NOSYNC 0 #define RING_MAX_IDLE(base) ((base)+0x54) #define RING_HWS_PGA(base) ((base)+0x80) #define RING_HWS_PGA_GEN6(base) ((base)+0x2080) #define GEN7_WR_WATERMARK 0x4028 #define GEN7_GFX_PRIO_CTRL 0x402C #define ARB_MODE 0x4030 #define ARB_MODE_SWIZZLE_SNB (1<<4) #define ARB_MODE_SWIZZLE_IVB (1<<5) #define GEN7_GFX_PEND_TLB0 0x4034 #define GEN7_GFX_PEND_TLB1 0x4038 /* L3, CVS, ZTLB, RCC, CASC LRA min, max values */ #define GEN7_LRA_LIMITS_BASE 0x403C #define GEN7_LRA_LIMITS_REG_NUM 13 #define GEN7_MEDIA_MAX_REQ_COUNT 0x4070 #define GEN7_GFX_MAX_REQ_COUNT 0x4074 #define GAMTARBMODE 0x04a08 #define ARB_MODE_BWGTLB_DISABLE (1<<9) #define ARB_MODE_SWIZZLE_BDW (1<<1) #define RENDER_HWS_PGA_GEN7 (0x04080) #define RING_FAULT_REG(ring) (0x4094 + 0x100*(ring)->id) #define RING_FAULT_GTTSEL_MASK (1<<11) #define RING_FAULT_SRCID(x) ((x >> 3) & 0xff) #define RING_FAULT_FAULT_TYPE(x) ((x >> 1) & 0x3) #define RING_FAULT_VALID (1<<0) #define DONE_REG 0x40b0 #define GEN8_PRIVATE_PAT 0x40e0 #define BSD_HWS_PGA_GEN7 (0x04180) #define BLT_HWS_PGA_GEN7 (0x04280) #define VEBOX_HWS_PGA_GEN7 (0x04380) #define RING_ACTHD(base) ((base)+0x74) #define RING_ACTHD_UDW(base) ((base)+0x5c) #define RING_NOPID(base) ((base)+0x94) #define RING_IMR(base) ((base)+0xa8) #define RING_HWSTAM(base) ((base)+0x98) #define RING_TIMESTAMP(base) ((base)+0x358) #define TAIL_ADDR 0x001FFFF8 #define HEAD_WRAP_COUNT 0xFFE00000 #define HEAD_WRAP_ONE 0x00200000 #define HEAD_ADDR 0x001FFFFC #define RING_NR_PAGES 0x001FF000 #define RING_REPORT_MASK 0x00000006 #define RING_REPORT_64K 0x00000002 #define RING_REPORT_128K 0x00000004 #define RING_NO_REPORT 0x00000000 #define RING_VALID_MASK 0x00000001 #define RING_VALID 0x00000001 #define RING_INVALID 0x00000000 #define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */ #define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */ #define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */ #define GEN7_TLB_RD_ADDR 0x4700 #if 0 #define PRB0_TAIL 0x02030 #define PRB0_HEAD 0x02034 #define PRB0_START 0x02038 #define PRB0_CTL 0x0203c #define PRB1_TAIL 0x02040 /* 915+ only */ #define PRB1_HEAD 0x02044 /* 915+ only */ #define PRB1_START 0x02048 /* 915+ only */ #define PRB1_CTL 0x0204c /* 915+ only */ #endif #define IPEIR_I965 0x02064 #define IPEHR_I965 0x02068 #define INSTDONE_I965 0x0206c #define GEN7_INSTDONE_1 0x0206c #define GEN7_SC_INSTDONE 0x07100 #define GEN7_SAMPLER_INSTDONE 0x0e160 #define GEN7_ROW_INSTDONE 0x0e164 #define I915_NUM_INSTDONE_REG 4 #define RING_IPEIR(base) ((base)+0x64) #define RING_IPEHR(base) ((base)+0x68) #define RING_INSTDONE(base) ((base)+0x6c) #define RING_INSTPS(base) ((base)+0x70) #define RING_DMA_FADD(base) ((base)+0x78) #define RING_DMA_FADD_UDW(base) ((base)+0x60) /* gen8+ */ #define RING_INSTPM(base) ((base)+0xc0) #define RING_MI_MODE(base) ((base)+0x9c) #define INSTPS 0x02070 /* 965+ only */ #define INSTDONE1 0x0207c /* 965+ only */ #define ACTHD_I965 0x02074 #define HWS_PGA 0x02080 #define HWS_ADDRESS_MASK 0xfffff000 #define HWS_START_ADDRESS_SHIFT 4 #define PWRCTXA 0x2088 /* 965GM+ only */ #define PWRCTX_EN (1<<0) #define IPEIR 0x02088 #define IPEHR 0x0208c #define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 #define DMA_FADD_I8XX 0x020d0 #define RING_BBSTATE(base) ((base)+0x110) #define RING_BBADDR(base) ((base)+0x140) #define RING_BBADDR_UDW(base) ((base)+0x168) /* gen8+ */ #define ERROR_GEN6 0x040a0 #define GEN7_ERR_INT 0x44040 #define ERR_INT_POISON (1<<31) #define ERR_INT_MMIO_UNCLAIMED (1<<13) #define ERR_INT_PIPE_CRC_DONE_C (1<<8) #define ERR_INT_FIFO_UNDERRUN_C (1<<6) #define ERR_INT_PIPE_CRC_DONE_B (1<<5) #define ERR_INT_FIFO_UNDERRUN_B (1<<3) #define ERR_INT_PIPE_CRC_DONE_A (1<<2) #define ERR_INT_PIPE_CRC_DONE(pipe) (1<<(2 + pipe*3)) #define ERR_INT_FIFO_UNDERRUN_A (1<<0) #define ERR_INT_FIFO_UNDERRUN(pipe) (1<<(pipe*3)) #define FPGA_DBG 0x42300 #define FPGA_DBG_RM_NOCLAIM (1<<31) #define DERRMR 0x44050 /* Note that HBLANK events are reserved on bdw+ */ #define DERRMR_PIPEA_SCANLINE (1<<0) #define DERRMR_PIPEA_PRI_FLIP_DONE (1<<1) #define DERRMR_PIPEA_SPR_FLIP_DONE (1<<2) #define DERRMR_PIPEA_VBLANK (1<<3) #define DERRMR_PIPEA_HBLANK (1<<5) #define DERRMR_PIPEB_SCANLINE (1<<8) #define DERRMR_PIPEB_PRI_FLIP_DONE (1<<9) #define DERRMR_PIPEB_SPR_FLIP_DONE (1<<10) #define DERRMR_PIPEB_VBLANK (1<<11) #define DERRMR_PIPEB_HBLANK (1<<13) /* Note that PIPEC is not a simple translation of PIPEA/PIPEB */ #define DERRMR_PIPEC_SCANLINE (1<<14) #define DERRMR_PIPEC_PRI_FLIP_DONE (1<<15) #define DERRMR_PIPEC_SPR_FLIP_DONE (1<<20) #define DERRMR_PIPEC_VBLANK (1<<21) #define DERRMR_PIPEC_HBLANK (1<<22) /* GM45+ chicken bits -- debug workaround bits that may be required * for various sorts of correct behavior. The top 16 bits of each are * the enables for writing to the corresponding low bit. */ #define _3D_CHICKEN 0x02084 #define _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB (1 << 10) #define _3D_CHICKEN2 0x0208c /* Disables pipelining of read flushes past the SF-WIZ interface. * Required on all Ironlake steppings according to the B-Spec, but the * particular danger of not doing so is not specified. */ # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) #define _3D_CHICKEN3 0x02090 #define _3D_CHICKEN_SF_DISABLE_OBJEND_CULL (1 << 10) #define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) #define _3D_CHICKEN_SDE_LIMIT_FIFO_POLY_DEPTH(x) ((x)<<1) /* gen8+ */ #define _3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH (1 << 1) /* gen6 */ #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) # define MI_FLUSH_ENABLE (1 << 12) # define ASYNC_FLIP_PERF_DISABLE (1 << 14) # define MODE_IDLE (1 << 9) # define STOP_RING (1 << 8) #define GEN6_GT_MODE 0x20d0 #define GEN7_GT_MODE 0x7008 #define GEN6_WIZ_HASHING(hi, lo) (((hi) << 9) | ((lo) << 7)) #define GEN6_WIZ_HASHING_8x8 GEN6_WIZ_HASHING(0, 0) #define GEN6_WIZ_HASHING_8x4 GEN6_WIZ_HASHING(0, 1) #define GEN6_WIZ_HASHING_16x4 GEN6_WIZ_HASHING(1, 0) #define GEN6_WIZ_HASHING_MASK (GEN6_WIZ_HASHING(1, 1) << 16) #define GEN6_TD_FOUR_ROW_DISPATCH_DISABLE (1 << 5) #define GFX_MODE 0x02520 #define GFX_MODE_GEN7 0x0229c #define RING_MODE_GEN7(ring) ((ring)->mmio_base+0x29c) #define GFX_RUN_LIST_ENABLE (1<<15) #define GFX_TLB_INVALIDATE_EXPLICIT (1<<13) #define GFX_SURFACE_FAULT_ENABLE (1<<12) #define GFX_REPLAY_MODE (1<<11) #define GFX_PSMI_GRANULARITY (1<<10) #define GFX_PPGTT_ENABLE (1<<9) #define VLV_DISPLAY_BASE 0x180000 #define VLV_MIPI_BASE VLV_DISPLAY_BASE #define VLV_GU_CTL0 (VLV_DISPLAY_BASE + 0x2030) #define VLV_GU_CTL1 (VLV_DISPLAY_BASE + 0x2034) #define SCPD0 0x0209c /* 915+ only */ #define IER 0x020a0 #define IIR 0x020a4 #define IMR 0x020a8 #define ISR 0x020ac #define VLV_GUNIT_CLOCK_GATE (VLV_DISPLAY_BASE + 0x2060) #define GINT_DIS (1<<22) #define GCFG_DIS (1<<8) #define VLV_GUNIT_CLOCK_GATE2 (VLV_DISPLAY_BASE + 0x2064) #define VLV_IIR_RW (VLV_DISPLAY_BASE + 0x2084) #define VLV_IER (VLV_DISPLAY_BASE + 0x20a0) #define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4) #define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8) #define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac) #define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120) #define VLV_PCBR_ADDR_SHIFT 12 #define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */ #define EIR 0x020b0 #define EMR 0x020b4 #define ESR 0x020b8 #define GM45_ERROR_PAGE_TABLE (1<<5) #define GM45_ERROR_MEM_PRIV (1<<4) #define I915_ERROR_PAGE_TABLE (1<<4) #define GM45_ERROR_CP_PRIV (1<<3) #define I915_ERROR_MEMORY_REFRESH (1<<1) #define I915_ERROR_INSTRUCTION (1<<0) #define INSTPM 0x020c0 #define INSTPM_SELF_EN (1<<12) /* 915GM only */ #define INSTPM_AGPBUSY_INT_EN (1<<11) /* gen3: when disabled, pending interrupts will not assert AGPBUSY# and will only be delivered when out of C3. */ #define INSTPM_FORCE_ORDERING (1<<7) /* GEN6+ */ #define INSTPM_TLB_INVALIDATE (1<<9) #define INSTPM_SYNC_FLUSH (1<<5) #define ACTHD 0x020c8 #define FW_BLC 0x020d8 #define FW_BLC2 0x020dc #define FW_BLC_SELF 0x020e0 /* 915+ only */ #define FW_BLC_SELF_EN_MASK (1<<31) #define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */ #define FW_BLC_SELF_EN (1<<15) /* 945 only */ #define MM_BURST_LENGTH 0x00700000 #define MM_FIFO_WATERMARK 0x0001F000 #define LM_BURST_LENGTH 0x00000700 #define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ /* Make render/texture TLB fetches lower priorty than associated data * fetches. This is not turned on by default */ #define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15) /* Isoch request wait on GTT enable (Display A/B/C streams). * Make isoch requests stall on the TLB update. May cause * display underruns (test mode only) */ #define MI_ARB_ISOCH_WAIT_GTT (1 << 14) /* Block grant count for isoch requests when block count is * set to a finite value. */ #define MI_ARB_BLOCK_GRANT_MASK (3 << 12) #define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */ #define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */ #define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */ #define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */ /* Enable render writes to complete in C2/C3/C4 power states. * If this isn't enabled, render writes are prevented in low * power states. That seems bad to me. */ #define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11) /* This acknowledges an async flip immediately instead * of waiting for 2TLB fetches. */ #define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10) /* Enables non-sequential data reads through arbiter */ #define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9) /* Disable FSB snooping of cacheable write cycles from binner/render * command stream */ #define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8) /* Arbiter time slice for non-isoch streams */ #define MI_ARB_TIME_SLICE_MASK (7 << 5) #define MI_ARB_TIME_SLICE_1 (0 << 5) #define MI_ARB_TIME_SLICE_2 (1 << 5) #define MI_ARB_TIME_SLICE_4 (2 << 5) #define MI_ARB_TIME_SLICE_6 (3 << 5) #define MI_ARB_TIME_SLICE_8 (4 << 5) #define MI_ARB_TIME_SLICE_10 (5 << 5) #define MI_ARB_TIME_SLICE_14 (6 << 5) #define MI_ARB_TIME_SLICE_16 (7 << 5) /* Low priority grace period page size */ #define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */ #define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4) /* Disable display A/B trickle feed */ #define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2) /* Set display plane priority */ #define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */ #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ #define MI_STATE 0x020e4 /* gen2 only */ #define MI_AGPBUSY_INT_EN (1 << 1) /* 85x only */ #define MI_AGPBUSY_830_MODE (1 << 0) /* 85x only */ #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_PIPELINED_RENDER_FLUSH_DISABLE (1<<8) #define CM0_IZ_OPT_DISABLE (1<<6) #define CM0_ZR_OPT_DISABLE (1<<5) #define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) #define CM0_DEPTH_EVICT_DISABLE (1<<4) #define CM0_COLOR_EVICT_DISABLE (1<<3) #define CM0_DEPTH_WRITE_DISABLE (1<<1) #define CM0_RC_OP_FLUSH_DISABLE (1<<0) #define GFX_FLSH_CNTL 0x02170 /* 915+ only */ #define GFX_FLSH_CNTL_GEN6 0x101008 #define GFX_FLSH_CNTL_EN (1<<0) #define ECOSKPD 0x021d0 #define ECO_GATING_CX_ONLY (1<<3) #define ECO_FLIP_DONE (1<<0) #define CACHE_MODE_0_GEN7 0x7000 /* IVB+ */ #define RC_OP_FLUSH_ENABLE (1<<0) #define HIZ_RAW_STALL_OPT_DISABLE (1<<2) #define CACHE_MODE_1 0x7004 /* IVB+ */ #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) #define GEN8_4x4_STC_OPTIMIZATION_DISABLE (1<<6) #define GEN6_BLITTER_ECOSKPD 0x221d0 #define GEN6_BLITTER_LOCK_SHIFT 16 #define GEN6_BLITTER_FBC_NOTIFY (1<<3) #define GEN6_RC_SLEEP_PSMI_CONTROL 0x2050 #define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12) #define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10) #define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050 #define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0) #define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2) #define GEN6_BSD_SLEEP_INDICATOR (1 << 3) #define GEN6_BSD_GO_INDICATOR (1 << 4) /* On modern GEN architectures interrupt control consists of two sets * of registers. The first set pertains to the ring generating the * interrupt. The second control is for the functional block generating the * interrupt. These are PM, GT, DE, etc. * * Luckily *knocks on wood* all the ring interrupt bits match up with the * GT interrupt bits, so we don't need to duplicate the defines. * * These defines should cover us well from SNB->HSW with minor exceptions * it can also work on ILK. */ #define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) #define GT_BLT_CS_ERROR_INTERRUPT (1 << 25) #define GT_BLT_USER_INTERRUPT (1 << 22) #define GT_BSD_CS_ERROR_INTERRUPT (1 << 15) #define GT_BSD_USER_INTERRUPT (1 << 12) #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 (1 << 11) /* hsw+; rsvd on snb, ivb, vlv */ #define GT_CONTEXT_SWITCH_INTERRUPT (1 << 8) #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */ #define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4) #define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3) #define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2) #define GT_RENDER_DEBUG_INTERRUPT (1 << 1) #define GT_RENDER_USER_INTERRUPT (1 << 0) #define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */ #define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */ #define GT_PARITY_ERROR(dev) \ (GT_RENDER_L3_PARITY_ERROR_INTERRUPT | \ (IS_HASWELL(dev) ? GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 : 0)) /* These are all the "old" interrupts */ #define ILK_BSD_USER_INTERRUPT (1<<5) #define I915_PM_INTERRUPT (1<<31) #define I915_ISP_INTERRUPT (1<<22) #define I915_LPE_PIPE_B_INTERRUPT (1<<21) #define I915_LPE_PIPE_A_INTERRUPT (1<<20) #define I915_MIPIB_INTERRUPT (1<<19) #define I915_MIPIA_INTERRUPT (1<<18) #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) #define I915_DISPLAY_PORT_INTERRUPT (1<<17) #define I915_DISPLAY_PIPE_C_HBLANK_INTERRUPT (1<<16) #define I915_MASTER_ERROR_INTERRUPT (1<<15) #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) #define I915_DISPLAY_PIPE_B_HBLANK_INTERRUPT (1<<14) #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ #define I915_DISPLAY_PIPE_A_HBLANK_INTERRUPT (1<<13) #define I915_HWB_OOM_INTERRUPT (1<<13) #define I915_LPE_PIPE_C_INTERRUPT (1<<12) #define I915_SYNC_STATUS_INTERRUPT (1<<12) #define I915_MISC_INTERRUPT (1<<11) #define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) #define I915_DISPLAY_PIPE_C_VBLANK_INTERRUPT (1<<10) #define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) #define I915_DISPLAY_PIPE_C_EVENT_INTERRUPT (1<<9) #define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) #define I915_DISPLAY_PIPE_C_DPBM_INTERRUPT (1<<8) #define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) #define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) #define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) #define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) #define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) #define I915_DISPLAY_PIPE_A_DPBM_INTERRUPT (1<<3) #define I915_DISPLAY_PIPE_B_DPBM_INTERRUPT (1<<2) #define I915_DEBUG_INTERRUPT (1<<2) #define I915_WINVALID_INTERRUPT (1<<1) #define I915_USER_INTERRUPT (1<<1) #define I915_ASLE_INTERRUPT (1<<0) #define I915_BSD_USER_INTERRUPT (1<<25) #define GEN6_BSD_RNCID 0x12198 #define GEN7_FF_THREAD_MODE 0x20a0 #define GEN7_FF_SCHED_MASK 0x0077070 #define GEN8_FF_DS_REF_CNT_FFME (1 << 19) #define GEN7_FF_TS_SCHED_HS1 (0x5<<16) #define GEN7_FF_TS_SCHED_HS0 (0x3<<16) #define GEN7_FF_TS_SCHED_LOAD_BALANCE (0x1<<16) #define GEN7_FF_TS_SCHED_HW (0x0<<16) /* Default */ #define GEN7_FF_VS_REF_CNT_FFME (1 << 15) #define GEN7_FF_VS_SCHED_HS1 (0x5<<12) #define GEN7_FF_VS_SCHED_HS0 (0x3<<12) #define GEN7_FF_VS_SCHED_LOAD_BALANCE (0x1<<12) /* Default */ #define GEN7_FF_VS_SCHED_HW (0x0<<12) #define GEN7_FF_DS_SCHED_HS1 (0x5<<4) #define GEN7_FF_DS_SCHED_HS0 (0x3<<4) #define GEN7_FF_DS_SCHED_LOAD_BALANCE (0x1<<4) /* Default */ #define GEN7_FF_DS_SCHED_HW (0x0<<4) /* * Framebuffer compression (915+ only) */ #define FBC_CFB_BASE 0x03200 /* 4k page aligned */ #define FBC_LL_BASE 0x03204 /* 4k page aligned */ #define FBC_CONTROL 0x03208 #define FBC_CTL_EN (1<<31) #define FBC_CTL_PERIODIC (1<<30) #define FBC_CTL_INTERVAL_SHIFT (16) #define FBC_CTL_UNCOMPRESSIBLE (1<<14) #define FBC_CTL_C3_IDLE (1<<13) #define FBC_CTL_STRIDE_SHIFT (5) #define FBC_CTL_FENCENO_SHIFT (0) #define FBC_COMMAND 0x0320c #define FBC_CMD_COMPRESS (1<<0) #define FBC_STATUS 0x03210 #define FBC_STAT_COMPRESSING (1<<31) #define FBC_STAT_COMPRESSED (1<<30) #define FBC_STAT_MODIFIED (1<<29) #define FBC_STAT_CURRENT_LINE_SHIFT (0) #define FBC_CONTROL2 0x03214 #define FBC_CTL_FENCE_DBL (0<<4) #define FBC_CTL_IDLE_IMM (0<<2) #define FBC_CTL_IDLE_FULL (1<<2) #define FBC_CTL_IDLE_LINE (2<<2) #define FBC_CTL_IDLE_DEBUG (3<<2) #define FBC_CTL_CPU_FENCE (1<<1) #define FBC_CTL_PLANE(plane) ((plane)<<0) #define FBC_FENCE_OFF 0x03218 /* BSpec typo has 321Bh */ #define FBC_TAG 0x03300 #define FBC_LL_SIZE (1536) /* Framebuffer compression for GM45+ */ #define DPFC_CB_BASE 0x3200 #define DPFC_CONTROL 0x3208 #define DPFC_CTL_EN (1<<31) #define DPFC_CTL_PLANE(plane) ((plane)<<30) #define IVB_DPFC_CTL_PLANE(plane) ((plane)<<29) #define DPFC_CTL_FENCE_EN (1<<29) #define IVB_DPFC_CTL_FENCE_EN (1<<28) #define DPFC_CTL_PERSISTENT_MODE (1<<25) #define DPFC_SR_EN (1<<10) #define DPFC_CTL_LIMIT_1X (0<<6) #define DPFC_CTL_LIMIT_2X (1<<6) #define DPFC_CTL_LIMIT_4X (2<<6) #define DPFC_RECOMP_CTL 0x320c #define DPFC_RECOMP_STALL_EN (1<<27) #define DPFC_RECOMP_STALL_WM_SHIFT (16) #define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000) #define DPFC_RECOMP_TIMER_COUNT_SHIFT (0) #define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f) #define DPFC_STATUS 0x3210 #define DPFC_INVAL_SEG_SHIFT (16) #define DPFC_INVAL_SEG_MASK (0x07ff0000) #define DPFC_COMP_SEG_SHIFT (0) #define DPFC_COMP_SEG_MASK (0x000003ff) #define DPFC_STATUS2 0x3214 #define DPFC_FENCE_YOFF 0x3218 #define DPFC_CHICKEN 0x3224 #define DPFC_HT_MODIFY (1<<31) /* Framebuffer compression for Ironlake */ #define ILK_DPFC_CB_BASE 0x43200 #define ILK_DPFC_CONTROL 0x43208 #define FBC_CTL_FALSE_COLOR (1<<10) /* The bit 28-8 is reserved */ #define DPFC_RESERVED (0x1FFFFF00) #define ILK_DPFC_RECOMP_CTL 0x4320c #define ILK_DPFC_STATUS 0x43210 #define ILK_DPFC_FENCE_YOFF 0x43218 #define ILK_DPFC_CHICKEN 0x43224 #define ILK_FBC_RT_BASE 0x2128 #define ILK_FBC_RT_VALID (1<<0) #define SNB_FBC_FRONT_BUFFER (1<<1) #define ILK_DISPLAY_CHICKEN1 0x42000 #define ILK_FBCQ_DIS (1<<22) #define ILK_PABSTRETCH_DIS (1<<21) /* * Framebuffer compression for Sandybridge * * The following two registers are of type GTTMMADR */ #define SNB_DPFC_CTL_SA 0x100100 #define SNB_CPU_FENCE_ENABLE (1<<29) #define DPFC_CPU_FENCE_OFFSET 0x100104 /* Framebuffer compression for Ivybridge */ #define IVB_FBC_RT_BASE 0x7020 #define IPS_CTL 0x43408 #define IPS_ENABLE (1 << 31) #define MSG_FBC_REND_STATE 0x50380 #define FBC_REND_NUKE (1<<2) #define FBC_REND_CACHE_CLEAN (1<<1) /* * GPIO regs */ #define GPIOA 0x5010 #define GPIOB 0x5014 #define GPIOC 0x5018 #define GPIOD 0x501c #define GPIOE 0x5020 #define GPIOF 0x5024 #define GPIOG 0x5028 #define GPIOH 0x502c # define GPIO_CLOCK_DIR_MASK (1 << 0) # define GPIO_CLOCK_DIR_IN (0 << 1) # define GPIO_CLOCK_DIR_OUT (1 << 1) # define GPIO_CLOCK_VAL_MASK (1 << 2) # define GPIO_CLOCK_VAL_OUT (1 << 3) # define GPIO_CLOCK_VAL_IN (1 << 4) # define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) # define GPIO_DATA_DIR_MASK (1 << 8) # define GPIO_DATA_DIR_IN (0 << 9) # define GPIO_DATA_DIR_OUT (1 << 9) # define GPIO_DATA_VAL_MASK (1 << 10) # define GPIO_DATA_VAL_OUT (1 << 11) # define GPIO_DATA_VAL_IN (1 << 12) # define GPIO_DATA_PULLUP_DISABLE (1 << 13) #define GMBUS0 0x5100 /* clock/port select */ #define GMBUS_RATE_100KHZ (0<<8) #define GMBUS_RATE_50KHZ (1<<8) #define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ #define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */ #define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */ #define GMBUS_PORT_DISABLED 0 #define GMBUS_PORT_SSC 1 #define GMBUS_PORT_VGADDC 2 #define GMBUS_PORT_PANEL 3 #define GMBUS_PORT_DPD_CHV 3 /* HDMID_CHV */ #define GMBUS_PORT_DPC 4 /* HDMIC */ #define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ #define GMBUS_PORT_DPD 6 /* HDMID */ #define GMBUS_PORT_RESERVED 7 /* 7 reserved */ #define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1) #define GMBUS1 0x5104 /* command/status */ #define GMBUS_SW_CLR_INT (1<<31) #define GMBUS_SW_RDY (1<<30) #define GMBUS_ENT (1<<29) /* enable timeout */ #define GMBUS_CYCLE_NONE (0<<25) #define GMBUS_CYCLE_WAIT (1<<25) #define GMBUS_CYCLE_INDEX (2<<25) #define GMBUS_CYCLE_STOP (4<<25) #define GMBUS_BYTE_COUNT_SHIFT 16 #define GMBUS_SLAVE_INDEX_SHIFT 8 #define GMBUS_SLAVE_ADDR_SHIFT 1 #define GMBUS_SLAVE_READ (1<<0) #define GMBUS_SLAVE_WRITE (0<<0) #define GMBUS2 0x5108 /* status */ #define GMBUS_INUSE (1<<15) #define GMBUS_HW_WAIT_PHASE (1<<14) #define GMBUS_STALL_TIMEOUT (1<<13) #define GMBUS_INT (1<<12) #define GMBUS_HW_RDY (1<<11) #define GMBUS_SATOER (1<<10) #define GMBUS_ACTIVE (1<<9) #define GMBUS3 0x510c /* data buffer bytes 3-0 */ #define GMBUS4 0x5110 /* interrupt mask (Pineview+) */ #define GMBUS_SLAVE_TIMEOUT_EN (1<<4) #define GMBUS_NAK_EN (1<<3) #define GMBUS_IDLE_EN (1<<2) #define GMBUS_HW_WAIT_EN (1<<1) #define GMBUS_HW_RDY_EN (1<<0) #define GMBUS5 0x5120 /* byte index */ #define GMBUS_2BYTE_INDEX_EN (1<<31) /* * Clock control & power management */ #define _DPLL_A (dev_priv->info.display_mmio_offset + 0x6014) #define _DPLL_B (dev_priv->info.display_mmio_offset + 0x6018) #define _CHV_DPLL_C (dev_priv->info.display_mmio_offset + 0x6030) #define DPLL(pipe) _PIPE3((pipe), _DPLL_A, _DPLL_B, _CHV_DPLL_C) #define VGA0 0x6000 #define VGA1 0x6004 #define VGA_PD 0x6010 #define VGA0_PD_P2_DIV_4 (1 << 7) #define VGA0_PD_P1_DIV_2 (1 << 5) #define VGA0_PD_P1_SHIFT 0 #define VGA0_PD_P1_MASK (0x1f << 0) #define VGA1_PD_P2_DIV_4 (1 << 15) #define VGA1_PD_P1_DIV_2 (1 << 13) #define VGA1_PD_P1_SHIFT 8 #define VGA1_PD_P1_MASK (0x1f << 8) #define DPLL_VCO_ENABLE (1 << 31) #define DPLL_SDVO_HIGH_SPEED (1 << 30) #define DPLL_DVO_2X_MODE (1 << 30) #define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) #define DPLL_REFA_CLK_ENABLE_VLV (1 << 29) #define DPLL_VGA_MODE_DIS (1 << 28) #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ #define DPLLB_MODE_LVDS (2 << 26) /* i915 */ #define DPLL_MODE_MASK (3 << 26) #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ #define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ #define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ #define DPLL_LOCK_VLV (1<<15) #define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) #define DPLL_INTEGRATED_CLOCK_VLV (1<<13) #define DPLL_SSC_REF_CLOCK_CHV (1<<13) #define DPLL_PORTC_READY_MASK (0xf << 4) #define DPLL_PORTB_READY_MASK (0xf) #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 /* Additional CHV pll/phy registers */ #define DPIO_PHY_STATUS (VLV_DISPLAY_BASE + 0x6240) #define DPLL_PORTD_READY_MASK (0xf) #define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100) #define PHY_COM_LANE_RESET_DEASSERT(phy) (1 << (phy)) #define DISPLAY_PHY_STATUS (VLV_DISPLAY_BASE + 0x60104) #define PHY_POWERGOOD(phy) (((phy) == DPIO_PHY0) ? (1<<31) : (1<<30)) /* * The i830 generation, in LVDS mode, defines P1 as the bit number set within * this field (only one bit may be set). */ #define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 #define DPLL_FPA01_P1_POST_DIV_SHIFT 16 #define DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15 /* i830, required in DVO non-gang */ #define PLL_P2_DIVIDE_BY_4 (1 << 23) #define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ #define PLL_REF_INPUT_DREFCLK (0 << 13) #define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ #define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ #define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) #define PLL_REF_INPUT_MASK (3 << 13) #define PLL_LOAD_PULSE_PHASE_SHIFT 9 /* Ironlake */ # define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9 # define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9) # define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9) # define DPLL_FPA1_P1_POST_DIV_SHIFT 0 # define DPLL_FPA1_P1_POST_DIV_MASK 0xff /* * Parallel to Serial Load Pulse phase selection. * Selects the phase for the 10X DPLL clock for the PCIe * digital display port. The range is 4 to 13; 10 or more * is just a flip delay. The default is 6 */ #define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) #define DISPLAY_RATE_SELECT_FPA1 (1 << 8) /* * SDVO multiplier for 945G/GM. Not used on 965. */ #define SDVO_MULTIPLIER_MASK 0x000000ff #define SDVO_MULTIPLIER_SHIFT_HIRES 4 #define SDVO_MULTIPLIER_SHIFT_VGA 0 #define _DPLL_A_MD (dev_priv->info.display_mmio_offset + 0x601c) #define _DPLL_B_MD (dev_priv->info.display_mmio_offset + 0x6020) #define _CHV_DPLL_C_MD (dev_priv->info.display_mmio_offset + 0x603c) #define DPLL_MD(pipe) _PIPE3((pipe), _DPLL_A_MD, _DPLL_B_MD, _CHV_DPLL_C_MD) /* * UDI pixel divider, controlling how many pixels are stuffed into a packet. * * Value is pixels minus 1. Must be set to 1 pixel for SDVO. */ #define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 #define DPLL_MD_UDI_DIVIDER_SHIFT 24 /* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ #define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 #define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 /* * SDVO/UDI pixel multiplier. * * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus * clock rate is 10 times the DPLL clock. At low resolution/refresh rate * modes, the bus rate would be below the limits, so SDVO allows for stuffing * dummy bytes in the datastream at an increased clock rate, with both sides of * the link knowing how many bytes are fill. * * So, for a mode with a dotclock of 65Mhz, we would want to double the clock * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be * set to 130Mhz, and the SDVO multiplier set to 2x in this register and * through an SDVO command. * * This register field has values of multiplication factor minus 1, with * a maximum multiplier of 5 for SDVO. */ #define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 #define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 /* * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. * This best be set to the default value (3) or the CRT won't work. No, * I don't entirely understand what this does... */ #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 #define _FPA0 0x06040 #define _FPA1 0x06044 #define _FPB0 0x06048 #define _FPB1 0x0604c #define FP0(pipe) _PIPE(pipe, _FPA0, _FPB0) #define FP1(pipe) _PIPE(pipe, _FPA1, _FPB1) #define FP_N_DIV_MASK 0x003f0000 #define FP_N_PINEVIEW_DIV_MASK 0x00ff0000 #define FP_N_DIV_SHIFT 16 #define FP_M1_DIV_MASK 0x00003f00 #define FP_M1_DIV_SHIFT 8 #define FP_M2_DIV_MASK 0x0000003f #define FP_M2_PINEVIEW_DIV_MASK 0x000000ff #define FP_M2_DIV_SHIFT 0 #define DPLL_TEST 0x606c #define DPLLB_TEST_SDVO_DIV_1 (0 << 22) #define DPLLB_TEST_SDVO_DIV_2 (1 << 22) #define DPLLB_TEST_SDVO_DIV_4 (2 << 22) #define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) #define DPLLB_TEST_N_BYPASS (1 << 19) #define DPLLB_TEST_M_BYPASS (1 << 18) #define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) #define DPLLA_TEST_N_BYPASS (1 << 3) #define DPLLA_TEST_M_BYPASS (1 << 2) #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) #define D_STATE 0x6104 #define DSTATE_GFX_RESET_I830 (1<<6) #define DSTATE_PLL_D3_OFF (1<<3) #define DSTATE_GFX_CLOCK_GATING (1<<1) #define DSTATE_DOT_CLOCK_GATING (1<<0) #define DSPCLK_GATE_D (dev_priv->info.display_mmio_offset + 0x6200) # define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */ # define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */ # define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */ # define VRDUNIT_CLOCK_GATE_DISABLE (1 << 27) /* 965 */ # define AUDUNIT_CLOCK_GATE_DISABLE (1 << 26) /* 965 */ # define DPUNIT_A_CLOCK_GATE_DISABLE (1 << 25) /* 965 */ # define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) /* 965 */ # define TVRUNIT_CLOCK_GATE_DISABLE (1 << 23) /* 915-945 */ # define TVCUNIT_CLOCK_GATE_DISABLE (1 << 22) /* 915-945 */ # define TVFUNIT_CLOCK_GATE_DISABLE (1 << 21) /* 915-945 */ # define TVEUNIT_CLOCK_GATE_DISABLE (1 << 20) /* 915-945 */ # define DVSUNIT_CLOCK_GATE_DISABLE (1 << 19) /* 915-945 */ # define DSSUNIT_CLOCK_GATE_DISABLE (1 << 18) /* 915-945 */ # define DDBUNIT_CLOCK_GATE_DISABLE (1 << 17) /* 915-945 */ # define DPRUNIT_CLOCK_GATE_DISABLE (1 << 16) /* 915-945 */ # define DPFUNIT_CLOCK_GATE_DISABLE (1 << 15) /* 915-945 */ # define DPBMUNIT_CLOCK_GATE_DISABLE (1 << 14) /* 915-945 */ # define DPLSUNIT_CLOCK_GATE_DISABLE (1 << 13) /* 915-945 */ # define DPLUNIT_CLOCK_GATE_DISABLE (1 << 12) /* 915-945 */ # define DPOUNIT_CLOCK_GATE_DISABLE (1 << 11) # define DPBUNIT_CLOCK_GATE_DISABLE (1 << 10) # define DCUNIT_CLOCK_GATE_DISABLE (1 << 9) # define DPUNIT_CLOCK_GATE_DISABLE (1 << 8) # define VRUNIT_CLOCK_GATE_DISABLE (1 << 7) /* 915+: reserved */ # define OVHUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 830-865 */ # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) /* * This bit must be set on the 830 to prevent hangs when turning off the * overlay scaler. */ # define OVRUNIT_CLOCK_GATE_DISABLE (1 << 3) # define OVCUNIT_CLOCK_GATE_DISABLE (1 << 2) # define OVUUNIT_CLOCK_GATE_DISABLE (1 << 1) # define ZVUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 830 */ # define OVLUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 845,865 */ #define RENCLK_GATE_D1 0x6204 # define BLITTER_CLOCK_GATE_DISABLE (1 << 13) /* 945GM only */ # define MPEG_CLOCK_GATE_DISABLE (1 << 12) /* 945GM only */ # define PC_FE_CLOCK_GATE_DISABLE (1 << 11) # define PC_BE_CLOCK_GATE_DISABLE (1 << 10) # define WINDOWER_CLOCK_GATE_DISABLE (1 << 9) # define INTERPOLATOR_CLOCK_GATE_DISABLE (1 << 8) # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) # define MAG_CLOCK_GATE_DISABLE (1 << 5) /* This bit must be unset on 855,865 */ # define MECI_CLOCK_GATE_DISABLE (1 << 4) # define DCMP_CLOCK_GATE_DISABLE (1 << 3) # define MEC_CLOCK_GATE_DISABLE (1 << 2) # define MECO_CLOCK_GATE_DISABLE (1 << 1) /* This bit must be set on 855,865. */ # define SV_CLOCK_GATE_DISABLE (1 << 0) # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) # define I915_MOTION_COMP_CLOCK_GATE_DISABLE (1 << 14) # define I915_BD_BF_CLOCK_GATE_DISABLE (1 << 13) # define I915_SF_SE_CLOCK_GATE_DISABLE (1 << 12) # define I915_WM_CLOCK_GATE_DISABLE (1 << 11) # define I915_IZ_CLOCK_GATE_DISABLE (1 << 10) # define I915_PI_CLOCK_GATE_DISABLE (1 << 9) # define I915_DI_CLOCK_GATE_DISABLE (1 << 8) # define I915_SH_SV_CLOCK_GATE_DISABLE (1 << 7) # define I915_PL_DG_QC_FT_CLOCK_GATE_DISABLE (1 << 6) # define I915_SC_CLOCK_GATE_DISABLE (1 << 5) # define I915_FL_CLOCK_GATE_DISABLE (1 << 4) # define I915_DM_CLOCK_GATE_DISABLE (1 << 3) # define I915_PS_CLOCK_GATE_DISABLE (1 << 2) # define I915_CC_CLOCK_GATE_DISABLE (1 << 1) # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) /* This bit must always be set on 965G/965GM */ # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) /* This bit must always be set on 965G */ # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) # define I965_IF_CLOCK_GATE_DISABLE (1 << 20) # define I965_TC_CLOCK_GATE_DISABLE (1 << 19) # define I965_SO_CLOCK_GATE_DISABLE (1 << 17) # define I965_FBC_CLOCK_GATE_DISABLE (1 << 16) # define I965_MARI_CLOCK_GATE_DISABLE (1 << 15) # define I965_MASF_CLOCK_GATE_DISABLE (1 << 14) # define I965_MAWB_CLOCK_GATE_DISABLE (1 << 13) # define I965_EM_CLOCK_GATE_DISABLE (1 << 12) # define I965_UC_CLOCK_GATE_DISABLE (1 << 11) # define I965_SI_CLOCK_GATE_DISABLE (1 << 6) # define I965_MT_CLOCK_GATE_DISABLE (1 << 5) # define I965_PL_CLOCK_GATE_DISABLE (1 << 4) # define I965_DG_CLOCK_GATE_DISABLE (1 << 3) # define I965_QC_CLOCK_GATE_DISABLE (1 << 2) # define I965_FT_CLOCK_GATE_DISABLE (1 << 1) # define I965_DM_CLOCK_GATE_DISABLE (1 << 0) #define RENCLK_GATE_D2 0x6208 #define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9) #define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7) #define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6) #define VDECCLK_GATE_D 0x620C /* g4x only */ #define VCP_UNIT_CLOCK_GATE_DISABLE (1 << 4) #define RAMCLK_GATE_D 0x6210 /* CRL only */ #define DEUC 0x6214 /* CRL only */ #define FW_BLC_SELF_VLV (VLV_DISPLAY_BASE + 0x6500) #define FW_CSPWRDWNEN (1<<15) #define MI_ARB_VLV (VLV_DISPLAY_BASE + 0x6504) #define CZCLK_CDCLK_FREQ_RATIO (VLV_DISPLAY_BASE + 0x6508) #define CDCLK_FREQ_SHIFT 4 #define CDCLK_FREQ_MASK (0x1f << CDCLK_FREQ_SHIFT) #define CZCLK_FREQ_MASK 0xf #define GMBUSFREQ_VLV (VLV_DISPLAY_BASE + 0x6510) /* * Palette regs */ #define PALETTE_A_OFFSET 0xa000 #define PALETTE_B_OFFSET 0xa800 #define CHV_PALETTE_C_OFFSET 0xc000 #define PALETTE(pipe) (dev_priv->info.palette_offsets[pipe] + \ dev_priv->info.display_mmio_offset) /* MCH MMIO space */ /* * MCHBAR mirror. * * This mirrors the MCHBAR MMIO space whose location is determined by * device 0 function 0's pci config register 0x44 or 0x48 and matches it in * every way. It is not accessible from the CP register read instructions. * * Starting from Haswell, you can't write registers using the MCHBAR mirror, * just read. */ #define MCHBAR_MIRROR_BASE 0x10000 #define MCHBAR_MIRROR_BASE_SNB 0x140000 /* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */ #define DCLK (MCHBAR_MIRROR_BASE_SNB + 0x5e04) /* 915-945 and GM965 MCH register controlling DRAM channel access */ #define DCC 0x10200 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) #define DCC_ADDRESSING_MODE_MASK (3 << 0) #define DCC_CHANNEL_XOR_DISABLE (1 << 10) #define DCC_CHANNEL_XOR_BIT_17 (1 << 9) /* Pineview MCH register contains DDR3 setting */ #define CSHRDDR3CTL 0x101a8 #define CSHRDDR3CTL_DDR3 (1 << 2) /* 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 #define C1DRB3 0x10606 /* snb MCH registers for reading the DRAM channel configuration */ #define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004) #define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008) #define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C) #define MAD_DIMM_ECC_MASK (0x3 << 24) #define MAD_DIMM_ECC_OFF (0x0 << 24) #define MAD_DIMM_ECC_IO_ON_LOGIC_OFF (0x1 << 24) #define MAD_DIMM_ECC_IO_OFF_LOGIC_ON (0x2 << 24) #define MAD_DIMM_ECC_ON (0x3 << 24) #define MAD_DIMM_ENH_INTERLEAVE (0x1 << 22) #define MAD_DIMM_RANK_INTERLEAVE (0x1 << 21) #define MAD_DIMM_B_WIDTH_X16 (0x1 << 20) /* X8 chips if unset */ #define MAD_DIMM_A_WIDTH_X16 (0x1 << 19) /* X8 chips if unset */ #define MAD_DIMM_B_DUAL_RANK (0x1 << 18) #define MAD_DIMM_A_DUAL_RANK (0x1 << 17) #define MAD_DIMM_A_SELECT (0x1 << 16) /* DIMM sizes are in multiples of 256mb. */ #define MAD_DIMM_B_SIZE_SHIFT 8 #define MAD_DIMM_B_SIZE_MASK (0xff << MAD_DIMM_B_SIZE_SHIFT) #define MAD_DIMM_A_SIZE_SHIFT 0 #define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) /* snb MCH registers for priority tuning */ #define MCH_SSKPD (MCHBAR_MIRROR_BASE_SNB + 0x5d10) #define MCH_SSKPD_WM0_MASK 0x3f #define MCH_SSKPD_WM0_VAL 0xc #define MCH_SECP_NRG_STTS (MCHBAR_MIRROR_BASE_SNB + 0x592c) /* Clocking configuration register */ #define CLKCFG 0x10c00 #define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ #define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ /* Note, below two are guess */ #define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ #define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ #define CLKCFG_FSB_MASK (7 << 0) #define CLKCFG_MEM_533 (1 << 4) #define CLKCFG_MEM_667 (2 << 4) #define CLKCFG_MEM_800 (3 << 4) #define CLKCFG_MEM_MASK (7 << 4) #define TSC1 0x11001 #define TSE (1<<0) #define TR1 0x11006 #define TSFS 0x11020 #define TSFS_SLOPE_MASK 0x0000ff00 #define TSFS_SLOPE_SHIFT 8 #define TSFS_INTR_MASK 0x000000ff #define CRSTANDVID 0x11100 #define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */ #define PXVFREQ_PX_MASK 0x7f000000 #define PXVFREQ_PX_SHIFT 24 #define VIDFREQ_BASE 0x11110 #define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */ #define VIDFREQ2 0x11114 #define VIDFREQ3 0x11118 #define VIDFREQ4 0x1111c #define VIDFREQ_P0_MASK 0x1f000000 #define VIDFREQ_P0_SHIFT 24 #define VIDFREQ_P0_CSCLK_MASK 0x00f00000 #define VIDFREQ_P0_CSCLK_SHIFT 20 #define VIDFREQ_P0_CRCLK_MASK 0x000f0000 #define VIDFREQ_P0_CRCLK_SHIFT 16 #define VIDFREQ_P1_MASK 0x00001f00 #define VIDFREQ_P1_SHIFT 8 #define VIDFREQ_P1_CSCLK_MASK 0x000000f0 #define VIDFREQ_P1_CSCLK_SHIFT 4 #define VIDFREQ_P1_CRCLK_MASK 0x0000000f #define INTTOEXT_BASE_ILK 0x11300 #define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */ #define INTTOEXT_MAP3_SHIFT 24 #define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT) #define INTTOEXT_MAP2_SHIFT 16 #define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT) #define INTTOEXT_MAP1_SHIFT 8 #define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT) #define INTTOEXT_MAP0_SHIFT 0 #define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT) #define MEMSWCTL 0x11170 /* Ironlake only */ #define MEMCTL_CMD_MASK 0xe000 #define MEMCTL_CMD_SHIFT 13 #define MEMCTL_CMD_RCLK_OFF 0 #define MEMCTL_CMD_RCLK_ON 1 #define MEMCTL_CMD_CHFREQ 2 #define MEMCTL_CMD_CHVID 3 #define MEMCTL_CMD_VMMOFF 4 #define MEMCTL_CMD_VMMON 5 #define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears when command complete */ #define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */ #define MEMCTL_FREQ_SHIFT 8 #define MEMCTL_SFCAVM (1<<7) #define MEMCTL_TGT_VID_MASK 0x007f #define MEMIHYST 0x1117c #define MEMINTREN 0x11180 /* 16 bits */ #define MEMINT_RSEXIT_EN (1<<8) #define MEMINT_CX_SUPR_EN (1<<7) #define MEMINT_CONT_BUSY_EN (1<<6) #define MEMINT_AVG_BUSY_EN (1<<5) #define MEMINT_EVAL_CHG_EN (1<<4) #define MEMINT_MON_IDLE_EN (1<<3) #define MEMINT_UP_EVAL_EN (1<<2) #define MEMINT_DOWN_EVAL_EN (1<<1) #define MEMINT_SW_CMD_EN (1<<0) #define MEMINTRSTR 0x11182 /* 16 bits */ #define MEM_RSEXIT_MASK 0xc000 #define MEM_RSEXIT_SHIFT 14 #define MEM_CONT_BUSY_MASK 0x3000 #define MEM_CONT_BUSY_SHIFT 12 #define MEM_AVG_BUSY_MASK 0x0c00 #define MEM_AVG_BUSY_SHIFT 10 #define MEM_EVAL_CHG_MASK 0x0300 #define MEM_EVAL_BUSY_SHIFT 8 #define MEM_MON_IDLE_MASK 0x00c0 #define MEM_MON_IDLE_SHIFT 6 #define MEM_UP_EVAL_MASK 0x0030 #define MEM_UP_EVAL_SHIFT 4 #define MEM_DOWN_EVAL_MASK 0x000c #define MEM_DOWN_EVAL_SHIFT 2 #define MEM_SW_CMD_MASK 0x0003 #define MEM_INT_STEER_GFX 0 #define MEM_INT_STEER_CMR 1 #define MEM_INT_STEER_SMI 2 #define MEM_INT_STEER_SCI 3 #define MEMINTRSTS 0x11184 #define MEMINT_RSEXIT (1<<7) #define MEMINT_CONT_BUSY (1<<6) #define MEMINT_AVG_BUSY (1<<5) #define MEMINT_EVAL_CHG (1<<4) #define MEMINT_MON_IDLE (1<<3) #define MEMINT_UP_EVAL (1<<2) #define MEMINT_DOWN_EVAL (1<<1) #define MEMINT_SW_CMD (1<<0) #define MEMMODECTL 0x11190 #define MEMMODE_BOOST_EN (1<<31) #define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */ #define MEMMODE_BOOST_FREQ_SHIFT 24 #define MEMMODE_IDLE_MODE_MASK 0x00030000 #define MEMMODE_IDLE_MODE_SHIFT 16 #define MEMMODE_IDLE_MODE_EVAL 0 #define MEMMODE_IDLE_MODE_CONT 1 #define MEMMODE_HWIDLE_EN (1<<15) #define MEMMODE_SWMODE_EN (1<<14) #define MEMMODE_RCLK_GATE (1<<13) #define MEMMODE_HW_UPDATE (1<<12) #define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */ #define MEMMODE_FSTART_SHIFT 8 #define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */ #define MEMMODE_FMAX_SHIFT 4 #define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */ #define RCBMAXAVG 0x1119c #define MEMSWCTL2 0x1119e /* Cantiga only */ #define SWMEMCMD_RENDER_OFF (0 << 13) #define SWMEMCMD_RENDER_ON (1 << 13) #define SWMEMCMD_SWFREQ (2 << 13) #define SWMEMCMD_TARVID (3 << 13) #define SWMEMCMD_VRM_OFF (4 << 13) #define SWMEMCMD_VRM_ON (5 << 13) #define CMDSTS (1<<12) #define SFCAVM (1<<11) #define SWFREQ_MASK 0x0380 /* P0-7 */ #define SWFREQ_SHIFT 7 #define TARVID_MASK 0x001f #define MEMSTAT_CTG 0x111a0 #define RCBMINAVG 0x111a0 #define RCUPEI 0x111b0 #define RCDNEI 0x111b4 #define RSTDBYCTL 0x111b8 #define RS1EN (1<<31) #define RS2EN (1<<30) #define RS3EN (1<<29) #define D3RS3EN (1<<28) /* Display D3 imlies RS3 */ #define SWPROMORSX (1<<27) /* RSx promotion timers ignored */ #define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */ #define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */ #define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */ #define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */ #define RSX_STATUS_MASK (7<<20) #define RSX_STATUS_ON (0<<20) #define RSX_STATUS_RC1 (1<<20) #define RSX_STATUS_RC1E (2<<20) #define RSX_STATUS_RS1 (3<<20) #define RSX_STATUS_RS2 (4<<20) /* aka rc6 */ #define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */ #define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */ #define RSX_STATUS_RSVD2 (7<<20) #define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */ #define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */ #define JRSC (1<<17) /* rsx coupled to cpu c-state */ #define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */ #define RS1CONTSAV_MASK (3<<14) #define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */ #define RS1CONTSAV_RSVD (1<<14) #define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */ #define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */ #define NORMSLEXLAT_MASK (3<<12) #define SLOW_RS123 (0<<12) #define SLOW_RS23 (1<<12) #define SLOW_RS3 (2<<12) #define NORMAL_RS123 (3<<12) #define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */ #define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */ #define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */ #define STATELOCK (1<<7) /* locked to rs_cstate if 0 */ #define RS_CSTATE_MASK (3<<4) #define RS_CSTATE_C367_RS1 (0<<4) #define RS_CSTATE_C36_RS1_C7_RS2 (1<<4) #define RS_CSTATE_RSVD (2<<4) #define RS_CSTATE_C367_RS2 (3<<4) #define REDSAVES (1<<3) /* no context save if was idle during rs0 */ #define REDRESTORES (1<<2) /* no restore if was idle during rs0 */ #define VIDCTL 0x111c0 #define VIDSTS 0x111c8 #define VIDSTART 0x111cc /* 8 bits */ #define MEMSTAT_ILK 0x111f8 #define MEMSTAT_VID_MASK 0x7f00 #define MEMSTAT_VID_SHIFT 8 #define MEMSTAT_PSTATE_MASK 0x00f8 #define MEMSTAT_PSTATE_SHIFT 3 #define MEMSTAT_MON_ACTV (1<<2) #define MEMSTAT_SRC_CTL_MASK 0x0003 #define MEMSTAT_SRC_CTL_CORE 0 #define MEMSTAT_SRC_CTL_TRB 1 #define MEMSTAT_SRC_CTL_THM 2 #define MEMSTAT_SRC_CTL_STDBY 3 #define RCPREVBSYTUPAVG 0x113b8 #define RCPREVBSYTDNAVG 0x113bc #define PMMISC 0x11214 #define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */ #define SDEW 0x1124c #define CSIEW0 0x11250 #define CSIEW1 0x11254 #define CSIEW2 0x11258 #define PEW 0x1125c #define DEW 0x11270 #define MCHAFE 0x112c0 #define CSIEC 0x112e0 #define DMIEC 0x112e4 #define DDREC 0x112e8 #define PEG0EC 0x112ec #define PEG1EC 0x112f0 #define GFXEC 0x112f4 #define RPPREVBSYTUPAVG 0x113b8 #define RPPREVBSYTDNAVG 0x113bc #define ECR 0x11600 #define ECR_GPFE (1<<31) #define ECR_IMONE (1<<30) #define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */ #define OGW0 0x11608 #define OGW1 0x1160c #define EG0 0x11610 #define EG1 0x11614 #define EG2 0x11618 #define EG3 0x1161c #define EG4 0x11620 #define EG5 0x11624 #define EG6 0x11628 #define EG7 0x1162c #define PXW 0x11664 #define PXWL 0x11680 #define LCFUSE02 0x116c0 #define LCFUSE_HIV_MASK 0x000000ff #define CSIPLL0 0x12c10 #define DDRMPLL1 0X12c20 #define PEG_BAND_GAP_DATA 0x14d68 #define GEN6_GT_THREAD_STATUS_REG 0x13805c #define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 #define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16)) #define GEN6_GT_PERF_STATUS (MCHBAR_MIRROR_BASE_SNB + 0x5948) #define GEN6_RP_STATE_LIMITS (MCHBAR_MIRROR_BASE_SNB + 0x5994) #define GEN6_RP_STATE_CAP (MCHBAR_MIRROR_BASE_SNB + 0x5998) /* * Logical Context regs */ #define CCID 0x2180 #define CCID_EN (1<<0) /* * Notes on SNB/IVB/VLV context size: * - Power context is saved elsewhere (LLC or stolen) * - Ring/execlist context is saved on SNB, not on IVB * - Extended context size already includes render context size * - We always need to follow the extended context size. * SNB BSpec has comments indicating that we should use the * render context size instead if execlists are disabled, but * based on empirical testing that's just nonsense. * - Pipelined/VF state is saved on SNB/IVB respectively * - GT1 size just indicates how much of render context * doesn't need saving on GT1 */ #define CXT_SIZE 0x21a0 #define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f) #define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f) #define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f) #define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f) #define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f) #define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_RING_SIZE(cxt_reg) + \ GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \ GEN6_CXT_PIPELINE_SIZE(cxt_reg)) #define GEN7_CXT_SIZE 0x21a8 #define GEN7_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 25) & 0x7f) #define GEN7_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 22) & 0x7) #define GEN7_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f) #define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f) #define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7) #define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f) #define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ GEN7_CXT_VFSTATE_SIZE(ctx_reg)) /* Haswell does have the CXT_SIZE register however it does not appear to be * valid. Now, docs explain in dwords what is in the context object. The full * size is 70720 bytes, however, the power context and execlist context will * never be saved (power context is stored elsewhere, and execlists don't work * on HSW) - so the final size is 66944 bytes, which rounds to 17 pages. */ #define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE) /* Same as Haswell, but 72064 bytes now. */ #define GEN8_CXT_TOTAL_SIZE (18 * PAGE_SIZE) #define CHV_CLK_CTL1 0x101100 #define VLV_CLK_CTL2 0x101104 #define CLK_CTL2_CZCOUNT_30NS_SHIFT 28 /* * Overlay regs */ #define OVADD 0x30000 #define DOVSTA 0x30008 #define OC_BUF (0x3<<20) #define OGAMC5 0x30010 #define OGAMC4 0x30014 #define OGAMC3 0x30018 #define OGAMC2 0x3001c #define OGAMC1 0x30020 #define OGAMC0 0x30024 /* * Display engine regs */ /* Pipe A CRC regs */ #define _PIPE_CRC_CTL_A 0x60050 #define PIPE_CRC_ENABLE (1 << 31) /* ivb+ source selection */ #define PIPE_CRC_SOURCE_PRIMARY_IVB (0 << 29) #define PIPE_CRC_SOURCE_SPRITE_IVB (1 << 29) #define PIPE_CRC_SOURCE_PF_IVB (2 << 29) /* ilk+ source selection */ #define PIPE_CRC_SOURCE_PRIMARY_ILK (0 << 28) #define PIPE_CRC_SOURCE_SPRITE_ILK (1 << 28) #define PIPE_CRC_SOURCE_PIPE_ILK (2 << 28) /* embedded DP port on the north display block, reserved on ivb */ #define PIPE_CRC_SOURCE_PORT_A_ILK (4 << 28) #define PIPE_CRC_SOURCE_FDI_ILK (5 << 28) /* reserved on ivb */ /* vlv source selection */ #define PIPE_CRC_SOURCE_PIPE_VLV (0 << 27) #define PIPE_CRC_SOURCE_HDMIB_VLV (1 << 27) #define PIPE_CRC_SOURCE_HDMIC_VLV (2 << 27) /* with DP port the pipe source is invalid */ #define PIPE_CRC_SOURCE_DP_D_VLV (3 << 27) #define PIPE_CRC_SOURCE_DP_B_VLV (6 << 27) #define PIPE_CRC_SOURCE_DP_C_VLV (7 << 27) /* gen3+ source selection */ #define PIPE_CRC_SOURCE_PIPE_I9XX (0 << 28) #define PIPE_CRC_SOURCE_SDVOB_I9XX (1 << 28) #define PIPE_CRC_SOURCE_SDVOC_I9XX (2 << 28) /* with DP/TV port the pipe source is invalid */ #define PIPE_CRC_SOURCE_DP_D_G4X (3 << 28) #define PIPE_CRC_SOURCE_TV_PRE (4 << 28) #define PIPE_CRC_SOURCE_TV_POST (5 << 28) #define PIPE_CRC_SOURCE_DP_B_G4X (6 << 28) #define PIPE_CRC_SOURCE_DP_C_G4X (7 << 28) /* gen2 doesn't have source selection bits */ #define PIPE_CRC_INCLUDE_BORDER_I8XX (1 << 30) #define _PIPE_CRC_RES_1_A_IVB 0x60064 #define _PIPE_CRC_RES_2_A_IVB 0x60068 #define _PIPE_CRC_RES_3_A_IVB 0x6006c #define _PIPE_CRC_RES_4_A_IVB 0x60070 #define _PIPE_CRC_RES_5_A_IVB 0x60074 #define _PIPE_CRC_RES_RED_A 0x60060 #define _PIPE_CRC_RES_GREEN_A 0x60064 #define _PIPE_CRC_RES_BLUE_A 0x60068 #define _PIPE_CRC_RES_RES1_A_I915 0x6006c #define _PIPE_CRC_RES_RES2_A_G4X 0x60080 /* Pipe B CRC regs */ #define _PIPE_CRC_RES_1_B_IVB 0x61064 #define _PIPE_CRC_RES_2_B_IVB 0x61068 #define _PIPE_CRC_RES_3_B_IVB 0x6106c #define _PIPE_CRC_RES_4_B_IVB 0x61070 #define _PIPE_CRC_RES_5_B_IVB 0x61074 #define PIPE_CRC_CTL(pipe) _TRANSCODER2(pipe, _PIPE_CRC_CTL_A) #define PIPE_CRC_RES_1_IVB(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_1_A_IVB) #define PIPE_CRC_RES_2_IVB(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_2_A_IVB) #define PIPE_CRC_RES_3_IVB(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_3_A_IVB) #define PIPE_CRC_RES_4_IVB(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_4_A_IVB) #define PIPE_CRC_RES_5_IVB(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_5_A_IVB) #define PIPE_CRC_RES_RED(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_RED_A) #define PIPE_CRC_RES_GREEN(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_GREEN_A) #define PIPE_CRC_RES_BLUE(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_BLUE_A) #define PIPE_CRC_RES_RES1_I915(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_RES1_A_I915) #define PIPE_CRC_RES_RES2_G4X(pipe) \ _TRANSCODER2(pipe, _PIPE_CRC_RES_RES2_A_G4X) /* Pipe A timing regs */ #define _HTOTAL_A 0x60000 #define _HBLANK_A 0x60004 #define _HSYNC_A 0x60008 #define _VTOTAL_A 0x6000c #define _VBLANK_A 0x60010 #define _VSYNC_A 0x60014 #define _PIPEASRC 0x6001c #define _BCLRPAT_A 0x60020 #define _VSYNCSHIFT_A 0x60028 /* Pipe B timing regs */ #define _HTOTAL_B 0x61000 #define _HBLANK_B 0x61004 #define _HSYNC_B 0x61008 #define _VTOTAL_B 0x6100c #define _VBLANK_B 0x61010 #define _VSYNC_B 0x61014 #define _PIPEBSRC 0x6101c #define _BCLRPAT_B 0x61020 #define _VSYNCSHIFT_B 0x61028 #define TRANSCODER_A_OFFSET 0x60000 #define TRANSCODER_B_OFFSET 0x61000 #define TRANSCODER_C_OFFSET 0x62000 #define CHV_TRANSCODER_C_OFFSET 0x63000 #define TRANSCODER_EDP_OFFSET 0x6f000 #define _TRANSCODER2(pipe, reg) (dev_priv->info.trans_offsets[(pipe)] - \ dev_priv->info.trans_offsets[TRANSCODER_A] + (reg) + \ dev_priv->info.display_mmio_offset) #define HTOTAL(trans) _TRANSCODER2(trans, _HTOTAL_A) #define HBLANK(trans) _TRANSCODER2(trans, _HBLANK_A) #define HSYNC(trans) _TRANSCODER2(trans, _HSYNC_A) #define VTOTAL(trans) _TRANSCODER2(trans, _VTOTAL_A) #define VBLANK(trans) _TRANSCODER2(trans, _VBLANK_A) #define VSYNC(trans) _TRANSCODER2(trans, _VSYNC_A) #define BCLRPAT(trans) _TRANSCODER2(trans, _BCLRPAT_A) #define VSYNCSHIFT(trans) _TRANSCODER2(trans, _VSYNCSHIFT_A) #define PIPESRC(trans) _TRANSCODER2(trans, _PIPEASRC) /* HSW+ eDP PSR registers */ #define EDP_PSR_BASE(dev) (IS_HASWELL(dev) ? 0x64800 : 0x6f800) #define EDP_PSR_CTL(dev) (EDP_PSR_BASE(dev) + 0) #define EDP_PSR_ENABLE (1<<31) #define BDW_PSR_SINGLE_FRAME (1<<30) #define EDP_PSR_LINK_DISABLE (0<<27) #define EDP_PSR_LINK_STANDBY (1<<27) #define EDP_PSR_MIN_LINK_ENTRY_TIME_MASK (3<<25) #define EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES (0<<25) #define EDP_PSR_MIN_LINK_ENTRY_TIME_4_LINES (1<<25) #define EDP_PSR_MIN_LINK_ENTRY_TIME_2_LINES (2<<25) #define EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES (3<<25) #define EDP_PSR_MAX_SLEEP_TIME_SHIFT 20 #define EDP_PSR_SKIP_AUX_EXIT (1<<12) #define EDP_PSR_TP1_TP2_SEL (0<<11) #define EDP_PSR_TP1_TP3_SEL (1<<11) #define EDP_PSR_TP2_TP3_TIME_500us (0<<8) #define EDP_PSR_TP2_TP3_TIME_100us (1<<8) #define EDP_PSR_TP2_TP3_TIME_2500us (2<<8) #define EDP_PSR_TP2_TP3_TIME_0us (3<<8) #define EDP_PSR_TP1_TIME_500us (0<<4) #define EDP_PSR_TP1_TIME_100us (1<<4) #define EDP_PSR_TP1_TIME_2500us (2<<4) #define EDP_PSR_TP1_TIME_0us (3<<4) #define EDP_PSR_IDLE_FRAME_SHIFT 0 #define EDP_PSR_AUX_CTL(dev) (EDP_PSR_BASE(dev) + 0x10) #define EDP_PSR_AUX_DATA1(dev) (EDP_PSR_BASE(dev) + 0x14) #define EDP_PSR_DPCD_COMMAND 0x80060000 #define EDP_PSR_AUX_DATA2(dev) (EDP_PSR_BASE(dev) + 0x18) #define EDP_PSR_DPCD_NORMAL_OPERATION (1<<24) #define EDP_PSR_AUX_DATA3(dev) (EDP_PSR_BASE(dev) + 0x1c) #define EDP_PSR_AUX_DATA4(dev) (EDP_PSR_BASE(dev) + 0x20) #define EDP_PSR_AUX_DATA5(dev) (EDP_PSR_BASE(dev) + 0x24) #define EDP_PSR_STATUS_CTL(dev) (EDP_PSR_BASE(dev) + 0x40) #define EDP_PSR_STATUS_STATE_MASK (7<<29) #define EDP_PSR_STATUS_STATE_IDLE (0<<29) #define EDP_PSR_STATUS_STATE_SRDONACK (1<<29) #define EDP_PSR_STATUS_STATE_SRDENT (2<<29) #define EDP_PSR_STATUS_STATE_BUFOFF (3<<29) #define EDP_PSR_STATUS_STATE_BUFON (4<<29) #define EDP_PSR_STATUS_STATE_AUXACK (5<<29) #define EDP_PSR_STATUS_STATE_SRDOFFACK (6<<29) #define EDP_PSR_STATUS_LINK_MASK (3<<26) #define EDP_PSR_STATUS_LINK_FULL_OFF (0<<26) #define EDP_PSR_STATUS_LINK_FULL_ON (1<<26) #define EDP_PSR_STATUS_LINK_STANDBY (2<<26) #define EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT 20 #define EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK 0x1f #define EDP_PSR_STATUS_COUNT_SHIFT 16 #define EDP_PSR_STATUS_COUNT_MASK 0xf #define EDP_PSR_STATUS_AUX_ERROR (1<<15) #define EDP_PSR_STATUS_AUX_SENDING (1<<12) #define EDP_PSR_STATUS_SENDING_IDLE (1<<9) #define EDP_PSR_STATUS_SENDING_TP2_TP3 (1<<8) #define EDP_PSR_STATUS_SENDING_TP1 (1<<4) #define EDP_PSR_STATUS_IDLE_MASK 0xf #define EDP_PSR_PERF_CNT(dev) (EDP_PSR_BASE(dev) + 0x44) #define EDP_PSR_PERF_CNT_MASK 0xffffff #define EDP_PSR_DEBUG_CTL(dev) (EDP_PSR_BASE(dev) + 0x60) #define EDP_PSR_DEBUG_MASK_LPSP (1<<27) #define EDP_PSR_DEBUG_MASK_MEMUP (1<<26) #define EDP_PSR_DEBUG_MASK_HPD (1<<25) /* VGA port control */ #define ADPA 0x61100 #define PCH_ADPA 0xe1100 #define VLV_ADPA (VLV_DISPLAY_BASE + ADPA) #define ADPA_DAC_ENABLE (1<<31) #define ADPA_DAC_DISABLE 0 #define ADPA_PIPE_SELECT_MASK (1<<30) #define ADPA_PIPE_A_SELECT 0 #define ADPA_PIPE_B_SELECT (1<<30) #define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) /* CPT uses bits 29:30 for pch transcoder select */ #define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ #define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) #define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) #define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) #define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) #define ADPA_CRT_HOTPLUG_ENABLE (1<<23) #define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) #define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) #define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) #define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) #define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) #define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) #define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) #define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) #define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) #define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) #define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) #define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) #define ADPA_USE_VGA_HVPOLARITY (1<<15) #define ADPA_SETS_HVPOLARITY 0 #define ADPA_VSYNC_CNTL_DISABLE (1<<10) #define ADPA_VSYNC_CNTL_ENABLE 0 #define ADPA_HSYNC_CNTL_DISABLE (1<<11) #define ADPA_HSYNC_CNTL_ENABLE 0 #define ADPA_VSYNC_ACTIVE_HIGH (1<<4) #define ADPA_VSYNC_ACTIVE_LOW 0 #define ADPA_HSYNC_ACTIVE_HIGH (1<<3) #define ADPA_HSYNC_ACTIVE_LOW 0 #define ADPA_DPMS_MASK (~(3<<10)) #define ADPA_DPMS_ON (0<<10) #define ADPA_DPMS_SUSPEND (1<<10) #define ADPA_DPMS_STANDBY (2<<10) #define ADPA_DPMS_OFF (3<<10) /* Hotplug control (945+ only) */ #define PORT_HOTPLUG_EN (dev_priv->info.display_mmio_offset + 0x61110) #define PORTB_HOTPLUG_INT_EN (1 << 29) #define PORTC_HOTPLUG_INT_EN (1 << 28) #define PORTD_HOTPLUG_INT_EN (1 << 27) #define SDVOB_HOTPLUG_INT_EN (1 << 26) #define SDVOC_HOTPLUG_INT_EN (1 << 25) #define TV_HOTPLUG_INT_EN (1 << 18) #define CRT_HOTPLUG_INT_EN (1 << 9) #define HOTPLUG_INT_EN_MASK (PORTB_HOTPLUG_INT_EN | \ PORTC_HOTPLUG_INT_EN | \ PORTD_HOTPLUG_INT_EN | \ SDVOC_HOTPLUG_INT_EN | \ SDVOB_HOTPLUG_INT_EN | \ CRT_HOTPLUG_INT_EN) #define CRT_HOTPLUG_FORCE_DETECT (1 << 3) #define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) /* must use period 64 on GM45 according to docs */ #define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) #define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) #define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) #define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) #define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) #define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) #define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) #define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) #define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) #define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define PORT_HOTPLUG_STAT (dev_priv->info.display_mmio_offset + 0x61114) /* * HDMI/DP bits are gen4+ * * WARNING: Bspec for hpd status bits on gen4 seems to be completely confused. * Please check the detailed lore in the commit message for for experimental * evidence. */ #define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 29) #define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28) #define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 27) /* VLV DP/HDMI bits again match Bspec */ #define PORTD_HOTPLUG_LIVE_STATUS_VLV (1 << 27) #define PORTC_HOTPLUG_LIVE_STATUS_VLV (1 << 28) #define PORTB_HOTPLUG_LIVE_STATUS_VLV (1 << 29) #define PORTD_HOTPLUG_INT_STATUS (3 << 21) #define PORTD_HOTPLUG_INT_LONG_PULSE (2 << 21) #define PORTD_HOTPLUG_INT_SHORT_PULSE (1 << 21) #define PORTC_HOTPLUG_INT_STATUS (3 << 19) #define PORTC_HOTPLUG_INT_LONG_PULSE (2 << 19) #define PORTC_HOTPLUG_INT_SHORT_PULSE (1 << 19) #define PORTB_HOTPLUG_INT_STATUS (3 << 17) #define PORTB_HOTPLUG_INT_LONG_PULSE (2 << 17) #define PORTB_HOTPLUG_INT_SHORT_PLUSE (1 << 17) /* CRT/TV common between gen3+ */ #define CRT_HOTPLUG_INT_STATUS (1 << 11) #define TV_HOTPLUG_INT_STATUS (1 << 10) #define CRT_HOTPLUG_MONITOR_MASK (3 << 8) #define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) #define CRT_HOTPLUG_MONITOR_MONO (2 << 8) #define CRT_HOTPLUG_MONITOR_NONE (0 << 8) #define DP_AUX_CHANNEL_D_INT_STATUS_G4X (1 << 6) #define DP_AUX_CHANNEL_C_INT_STATUS_G4X (1 << 5) #define DP_AUX_CHANNEL_B_INT_STATUS_G4X (1 << 4) #define DP_AUX_CHANNEL_MASK_INT_STATUS_G4X (7 << 4) /* SDVO is different across gen3/4 */ #define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3) #define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2) /* * Bspec seems to be seriously misleaded about the SDVO hpd bits on i965g/gm, * since reality corrobates that they're the same as on gen3. But keep these * bits here (and the comment!) to help any other lost wanderers back onto the * right tracks. */ #define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4) #define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2) #define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7) #define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6) #define HOTPLUG_INT_STATUS_G4X (CRT_HOTPLUG_INT_STATUS | \ SDVOB_HOTPLUG_INT_STATUS_G4X | \ SDVOC_HOTPLUG_INT_STATUS_G4X | \ PORTB_HOTPLUG_INT_STATUS | \ PORTC_HOTPLUG_INT_STATUS | \ PORTD_HOTPLUG_INT_STATUS) #define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \ SDVOB_HOTPLUG_INT_STATUS_I915 | \ SDVOC_HOTPLUG_INT_STATUS_I915 | \ PORTB_HOTPLUG_INT_STATUS | \ PORTC_HOTPLUG_INT_STATUS | \ PORTD_HOTPLUG_INT_STATUS) /* SDVO and HDMI port control. * The same register may be used for SDVO or HDMI */ #define GEN3_SDVOB 0x61140 #define GEN3_SDVOC 0x61160 #define GEN4_HDMIB GEN3_SDVOB #define GEN4_HDMIC GEN3_SDVOC #define CHV_HDMID 0x6116C #define PCH_SDVOB 0xe1140 #define PCH_HDMIB PCH_SDVOB #define PCH_HDMIC 0xe1150 #define PCH_HDMID 0xe1160 #define PORT_DFT_I9XX 0x61150 #define DC_BALANCE_RESET (1 << 25) #define PORT_DFT2_G4X (dev_priv->info.display_mmio_offset + 0x61154) #define DC_BALANCE_RESET_VLV (1 << 31) #define PIPE_SCRAMBLE_RESET_MASK (0x3 << 0) #define PIPE_B_SCRAMBLE_RESET (1 << 1) #define PIPE_A_SCRAMBLE_RESET (1 << 0) /* Gen 3 SDVO bits: */ #define SDVO_ENABLE (1 << 31) #define SDVO_PIPE_SEL(pipe) ((pipe) << 30) #define SDVO_PIPE_SEL_MASK (1 << 30) #define SDVO_PIPE_B_SELECT (1 << 30) #define SDVO_STALL_SELECT (1 << 29) #define SDVO_INTERRUPT_ENABLE (1 << 26) /* * 915G/GM SDVO pixel multiplier. * Programmed value is multiplier - 1, up to 5x. * \sa DPLL_MD_UDI_MULTIPLIER_MASK */ #define SDVO_PORT_MULTIPLY_MASK (7 << 23) #define SDVO_PORT_MULTIPLY_SHIFT 23 #define SDVO_PHASE_SELECT_MASK (15 << 19) #define SDVO_PHASE_SELECT_DEFAULT (6 << 19) #define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) #define SDVOC_GANG_MODE (1 << 16) /* Port C only */ #define SDVO_BORDER_ENABLE (1 << 7) /* SDVO only */ #define SDVOB_PCIE_CONCURRENCY (1 << 3) /* Port B only */ #define SDVO_DETECTED (1 << 2) /* Bits to be preserved when writing */ #define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | \ SDVO_INTERRUPT_ENABLE) #define SDVOC_PRESERVE_MASK ((1 << 17) | SDVO_INTERRUPT_ENABLE) /* Gen 4 SDVO/HDMI bits: */ #define SDVO_COLOR_FORMAT_8bpc (0 << 26) #define SDVO_COLOR_FORMAT_MASK (7 << 26) #define SDVO_ENCODING_SDVO (0 << 10) #define SDVO_ENCODING_HDMI (2 << 10) #define HDMI_MODE_SELECT_HDMI (1 << 9) /* HDMI only */ #define HDMI_MODE_SELECT_DVI (0 << 9) /* HDMI only */ #define HDMI_COLOR_RANGE_16_235 (1 << 8) /* HDMI only */ #define SDVO_AUDIO_ENABLE (1 << 6) /* VSYNC/HSYNC bits new with 965, default is to be set */ #define SDVO_VSYNC_ACTIVE_HIGH (1 << 4) #define SDVO_HSYNC_ACTIVE_HIGH (1 << 3) /* Gen 5 (IBX) SDVO/HDMI bits: */ #define HDMI_COLOR_FORMAT_12bpc (3 << 26) /* HDMI only */ #define SDVOB_HOTPLUG_ENABLE (1 << 23) /* SDVO only */ /* Gen 6 (CPT) SDVO/HDMI bits: */ #define SDVO_PIPE_SEL_CPT(pipe) ((pipe) << 29) #define SDVO_PIPE_SEL_MASK_CPT (3 << 29) /* CHV SDVO/HDMI bits: */ #define SDVO_PIPE_SEL_CHV(pipe) ((pipe) << 24) #define SDVO_PIPE_SEL_MASK_CHV (3 << 24) /* DVO port control */ #define DVOA 0x61120 #define DVOB 0x61140 #define DVOC 0x61160 #define DVO_ENABLE (1 << 31) #define DVO_PIPE_B_SELECT (1 << 30) #define DVO_PIPE_STALL_UNUSED (0 << 28) #define DVO_PIPE_STALL (1 << 28) #define DVO_PIPE_STALL_TV (2 << 28) #define DVO_PIPE_STALL_MASK (3 << 28) #define DVO_USE_VGA_SYNC (1 << 15) #define DVO_DATA_ORDER_I740 (0 << 14) #define DVO_DATA_ORDER_FP (1 << 14) #define DVO_VSYNC_DISABLE (1 << 11) #define DVO_HSYNC_DISABLE (1 << 10) #define DVO_VSYNC_TRISTATE (1 << 9) #define DVO_HSYNC_TRISTATE (1 << 8) #define DVO_BORDER_ENABLE (1 << 7) #define DVO_DATA_ORDER_GBRG (1 << 6) #define DVO_DATA_ORDER_RGGB (0 << 6) #define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) #define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) #define DVO_VSYNC_ACTIVE_HIGH (1 << 4) #define DVO_HSYNC_ACTIVE_HIGH (1 << 3) #define DVO_BLANK_ACTIVE_HIGH (1 << 2) #define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ #define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ #define DVO_PRESERVE_MASK (0x7<<24) #define DVOA_SRCDIM 0x61124 #define DVOB_SRCDIM 0x61144 #define DVOC_SRCDIM 0x61164 #define DVO_SRCDIM_HORIZONTAL_SHIFT 12 #define DVO_SRCDIM_VERTICAL_SHIFT 0 /* LVDS port control */ #define LVDS 0x61180 /* * Enables the LVDS port. This bit must be set before DPLLs are enabled, as * the DPLL semantics change when the LVDS is assigned to that pipe. */ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) #define LVDS_PIPE_MASK (1 << 30) #define LVDS_PIPE(pipe) ((pipe) << 30) /* LVDS dithering flag on 965/g4x platform */ #define LVDS_ENABLE_DITHER (1 << 25) /* LVDS sync polarity flags. Set to invert (i.e. negative) */ #define LVDS_VSYNC_POLARITY (1 << 21) #define LVDS_HSYNC_POLARITY (1 << 20) /* Enable border for unscaled (or aspect-scaled) display */ #define LVDS_BORDER_ENABLE (1 << 15) /* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. */ #define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) #define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) #define LVDS_A0A2_CLKA_POWER_UP (3 << 8) /* * Controls the A3 data pair, which contains the additional LSBs for 24 bit * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be * on. */ #define LVDS_A3_POWER_MASK (3 << 6) #define LVDS_A3_POWER_DOWN (0 << 6) #define LVDS_A3_POWER_UP (3 << 6) /* * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP * is set. */ #define LVDS_CLKB_POWER_MASK (3 << 4) #define LVDS_CLKB_POWER_DOWN (0 << 4) #define LVDS_CLKB_POWER_UP (3 << 4) /* * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 * setting for whether we are in dual-channel mode. The B3 pair will * additionally only be powered up when LVDS_A3_POWER_UP is set. */ #define LVDS_B0B3_POWER_MASK (3 << 2) #define LVDS_B0B3_POWER_DOWN (0 << 2) #define LVDS_B0B3_POWER_UP (3 << 2) /* Video Data Island Packet control */ #define VIDEO_DIP_DATA 0x61178 /* Read the description of VIDEO_DIP_DATA (before Haswel) or VIDEO_DIP_ECC * (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte * of the infoframe structure specified by CEA-861. */ #define VIDEO_DIP_DATA_SIZE 32 #define VIDEO_DIP_VSC_DATA_SIZE 36 #define VIDEO_DIP_CTL 0x61170 /* Pre HSW: */ #define VIDEO_DIP_ENABLE (1 << 31) #define VIDEO_DIP_PORT(port) ((port) << 29) #define VIDEO_DIP_PORT_MASK (3 << 29) #define VIDEO_DIP_ENABLE_GCP (1 << 25) #define VIDEO_DIP_ENABLE_AVI (1 << 21) #define VIDEO_DIP_ENABLE_VENDOR (2 << 21) #define VIDEO_DIP_ENABLE_GAMUT (4 << 21) #define VIDEO_DIP_ENABLE_SPD (8 << 21) #define VIDEO_DIP_SELECT_AVI (0 << 19) #define VIDEO_DIP_SELECT_VENDOR (1 << 19) #define VIDEO_DIP_SELECT_SPD (3 << 19) #define VIDEO_DIP_SELECT_MASK (3 << 19) #define VIDEO_DIP_FREQ_ONCE (0 << 16) #define VIDEO_DIP_FREQ_VSYNC (1 << 16) #define VIDEO_DIP_FREQ_2VSYNC (2 << 16) #define VIDEO_DIP_FREQ_MASK (3 << 16) /* HSW and later: */ #define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20) #define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16) #define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12) #define VIDEO_DIP_ENABLE_VS_HSW (1 << 8) #define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4) #define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) /* Panel power sequencing */ #define PP_STATUS 0x61200 #define PP_ON (1 << 31) /* * Indicates that all dependencies of the panel are on: * * - PLL enabled * - pipe enabled * - LVDS/DVOB/DVOC on */ #define PP_READY (1 << 30) #define PP_SEQUENCE_NONE (0 << 28) #define PP_SEQUENCE_POWER_UP (1 << 28) #define PP_SEQUENCE_POWER_DOWN (2 << 28) #define PP_SEQUENCE_MASK (3 << 28) #define PP_SEQUENCE_SHIFT 28 #define PP_CYCLE_DELAY_ACTIVE (1 << 27) #define PP_SEQUENCE_STATE_MASK 0x0000000f #define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) #define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) #define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) #define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) #define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) #define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) #define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) #define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) #define PP_SEQUENCE_STATE_RESET (0xf << 0) #define PP_CONTROL 0x61204 #define POWER_TARGET_ON (1 << 0) #define PP_ON_DELAYS 0x61208 #define PP_OFF_DELAYS 0x6120c #define PP_DIVISOR 0x61210 /* Panel fitting */ #define PFIT_CONTROL (dev_priv->info.display_mmio_offset + 0x61230) #define PFIT_ENABLE (1 << 31) #define PFIT_PIPE_MASK (3 << 29) #define PFIT_PIPE_SHIFT 29 #define VERT_INTERP_DISABLE (0 << 10) #define VERT_INTERP_BILINEAR (1 << 10) #define VERT_INTERP_MASK (3 << 10) #define VERT_AUTO_SCALE (1 << 9) #define HORIZ_INTERP_DISABLE (0 << 6) #define HORIZ_INTERP_BILINEAR (1 << 6) #define HORIZ_INTERP_MASK (3 << 6) #define HORIZ_AUTO_SCALE (1 << 5) #define PANEL_8TO6_DITHER_ENABLE (1 << 3) #define PFIT_FILTER_FUZZY (0 << 24) #define PFIT_SCALING_AUTO (0 << 26) #define PFIT_SCALING_PROGRAMMED (1 << 26) #define PFIT_SCALING_PILLAR (2 << 26) #define PFIT_SCALING_LETTER (3 << 26) #define PFIT_PGM_RATIOS (dev_priv->info.display_mmio_offset + 0x61234) /* Pre-965 */ #define PFIT_VERT_SCALE_SHIFT 20 #define PFIT_VERT_SCALE_MASK 0xfff00000 #define PFIT_HORIZ_SCALE_SHIFT 4 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0 /* 965+ */ #define PFIT_VERT_SCALE_SHIFT_965 16 #define PFIT_VERT_SCALE_MASK_965 0x1fff0000 #define PFIT_HORIZ_SCALE_SHIFT_965 0 #define PFIT_HORIZ_SCALE_MASK_965 0x00001fff #define PFIT_AUTO_RATIOS (dev_priv->info.display_mmio_offset + 0x61238) #define _VLV_BLC_PWM_CTL2_A (dev_priv->info.display_mmio_offset + 0x61250) #define _VLV_BLC_PWM_CTL2_B (dev_priv->info.display_mmio_offset + 0x61350) #define VLV_BLC_PWM_CTL2(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \ _VLV_BLC_PWM_CTL2_B) #define _VLV_BLC_PWM_CTL_A (dev_priv->info.display_mmio_offset + 0x61254) #define _VLV_BLC_PWM_CTL_B (dev_priv->info.display_mmio_offset + 0x61354) #define VLV_BLC_PWM_CTL(pipe) _PIPE(pipe, _VLV_BLC_PWM_CTL_A, \ _VLV_BLC_PWM_CTL_B) #define _VLV_BLC_HIST_CTL_A (dev_priv->info.display_mmio_offset + 0x61260) #define _VLV_BLC_HIST_CTL_B (dev_priv->info.display_mmio_offset + 0x61360) #define VLV_BLC_HIST_CTL(pipe) _PIPE(pipe, _VLV_BLC_HIST_CTL_A, \ _VLV_BLC_HIST_CTL_B) /* Backlight control */ #define BLC_PWM_CTL2 (dev_priv->info.display_mmio_offset + 0x61250) /* 965+ only */ #define BLM_PWM_ENABLE (1 << 31) #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ #define BLM_PIPE_SELECT (1 << 29) #define BLM_PIPE_SELECT_IVB (3 << 29) #define BLM_PIPE_A (0 << 29) #define BLM_PIPE_B (1 << 29) #define BLM_PIPE_C (2 << 29) /* ivb + */ #define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ #define BLM_TRANSCODER_B BLM_PIPE_B #define BLM_TRANSCODER_C BLM_PIPE_C #define BLM_TRANSCODER_EDP (3 << 29) #define BLM_PIPE(pipe) ((pipe) << 29) #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) #define BLM_PHASE_IN_ENABLE (1 << 25) #define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) #define BLM_PHASE_IN_TIME_BASE_SHIFT (16) #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) #define BLM_PHASE_IN_COUNT_SHIFT (8) #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) #define BLM_PHASE_IN_INCR_SHIFT (0) #define BLM_PHASE_IN_INCR_MASK (0xff << 0) #define BLC_PWM_CTL (dev_priv->info.display_mmio_offset + 0x61254) /* * This is the most significant 15 bits of the number of backlight cycles in a * complete cycle of the modulated backlight control. * * The actual value is this field multiplied by two. */ #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) #define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ /* * This is the number of cycles out of the backlight modulation cycle for which * the backlight is on. * * This field must be no greater than the number of cycles in the complete * backlight modulation cycle. */ #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ #define BLC_HIST_CTL (dev_priv->info.display_mmio_offset + 0x61260) /* New registers for PCH-split platforms. Safe where new bits show up, the * register layout machtes with gen4 BLC_PWM_CTL[12]. */ #define BLC_PWM_CPU_CTL2 0x48250 #define BLC_PWM_CPU_CTL 0x48254 #define HSW_BLC_PWM2_CTL 0x48350 /* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ #define BLC_PWM_PCH_CTL1 0xc8250 #define BLM_PCH_PWM_ENABLE (1 << 31) #define BLM_PCH_OVERRIDE_ENABLE (1 << 30) #define BLM_PCH_POLARITY (1 << 29) #define BLC_PWM_PCH_CTL2 0xc8254 #define UTIL_PIN_CTL 0x48400 #define UTIL_PIN_ENABLE (1 << 31) #define PCH_GTC_CTL 0xe7000 #define PCH_GTC_ENABLE (1 << 31) /* TV port control */ #define TV_CTL 0x68000 /* Enables the TV encoder */ # define TV_ENC_ENABLE (1 << 31) /* Sources the TV encoder input from pipe B instead of A. */ # define TV_ENC_PIPEB_SELECT (1 << 30) /* Outputs composite video (DAC A only) */ # define TV_ENC_OUTPUT_COMPOSITE (0 << 28) /* Outputs SVideo video (DAC B/C) */ # define TV_ENC_OUTPUT_SVIDEO (1 << 28) /* Outputs Component video (DAC A/B/C) */ # define TV_ENC_OUTPUT_COMPONENT (2 << 28) /* Outputs Composite and SVideo (DAC A/B/C) */ # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) # define TV_TRILEVEL_SYNC (1 << 21) /* Enables slow sync generation (945GM only) */ # define TV_SLOW_SYNC (1 << 20) /* Selects 4x oversampling for 480i and 576p */ # define TV_OVERSAMPLE_4X (0 << 18) /* Selects 2x oversampling for 720p and 1080i */ # define TV_OVERSAMPLE_2X (1 << 18) /* Selects no oversampling for 1080p */ # define TV_OVERSAMPLE_NONE (2 << 18) /* Selects 8x oversampling */ # define TV_OVERSAMPLE_8X (3 << 18) /* Selects progressive mode rather than interlaced */ # define TV_PROGRESSIVE (1 << 17) /* Sets the colorburst to PAL mode. Required for non-M PAL modes. */ # define TV_PAL_BURST (1 << 16) /* Field for setting delay of Y compared to C */ # define TV_YC_SKEW_MASK (7 << 12) /* Enables a fix for 480p/576p standard definition modes on the 915GM only */ # define TV_ENC_SDP_FIX (1 << 11) /* * Enables a fix for the 915GM only. * * Not sure what it does. */ # define TV_ENC_C0_FIX (1 << 10) /* Bits that must be preserved by software */ # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) # define TV_FUSE_STATE_MASK (3 << 4) /* Read-only state that reports all features enabled */ # define TV_FUSE_STATE_ENABLED (0 << 4) /* Read-only state that reports that Macrovision is disabled in hardware*/ # define TV_FUSE_STATE_NO_MACROVISION (1 << 4) /* Read-only state that reports that TV-out is disabled in hardware. */ # define TV_FUSE_STATE_DISABLED (2 << 4) /* Normal operation */ # define TV_TEST_MODE_NORMAL (0 << 0) /* Encoder test pattern 1 - combo pattern */ # define TV_TEST_MODE_PATTERN_1 (1 << 0) /* Encoder test pattern 2 - full screen vertical 75% color bars */ # define TV_TEST_MODE_PATTERN_2 (2 << 0) /* Encoder test pattern 3 - full screen horizontal 75% color bars */ # define TV_TEST_MODE_PATTERN_3 (3 << 0) /* Encoder test pattern 4 - random noise */ # define TV_TEST_MODE_PATTERN_4 (4 << 0) /* Encoder test pattern 5 - linear color ramps */ # define TV_TEST_MODE_PATTERN_5 (5 << 0) /* * This test mode forces the DACs to 50% of full output. * * This is used for load detection in combination with TVDAC_SENSE_MASK */ # define TV_TEST_MODE_MONITOR_DETECT (7 << 0) # define TV_TEST_MODE_MASK (7 << 0) #define TV_DAC 0x68004 # define TV_DAC_SAVE 0x00ffff00 /* * Reports that DAC state change logic has reported change (RO). * * This gets cleared when TV_DAC_STATE_EN is cleared */ # define TVDAC_STATE_CHG (1 << 31) # define TVDAC_SENSE_MASK (7 << 28) /* Reports that DAC A voltage is above the detect threshold */ # define TVDAC_A_SENSE (1 << 30) /* Reports that DAC B voltage is above the detect threshold */ # define TVDAC_B_SENSE (1 << 29) /* Reports that DAC C voltage is above the detect threshold */ # define TVDAC_C_SENSE (1 << 28) /* * Enables DAC state detection logic, for load-based TV detection. * * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set * to off, for load detection to work. */ # define TVDAC_STATE_CHG_EN (1 << 27) /* Sets the DAC A sense value to high */ # define TVDAC_A_SENSE_CTL (1 << 26) /* Sets the DAC B sense value to high */ # define TVDAC_B_SENSE_CTL (1 << 25) /* Sets the DAC C sense value to high */ # define TVDAC_C_SENSE_CTL (1 << 24) /* Overrides the ENC_ENABLE and DAC voltage levels */ # define DAC_CTL_OVERRIDE (1 << 7) /* Sets the slew rate. Must be preserved in software */ # define ENC_TVDAC_SLEW_FAST (1 << 6) # define DAC_A_1_3_V (0 << 4) # define DAC_A_1_1_V (1 << 4) # define DAC_A_0_7_V (2 << 4) # define DAC_A_MASK (3 << 4) # define DAC_B_1_3_V (0 << 2) # define DAC_B_1_1_V (1 << 2) # define DAC_B_0_7_V (2 << 2) # define DAC_B_MASK (3 << 2) # define DAC_C_1_3_V (0 << 0) # define DAC_C_1_1_V (1 << 0) # define DAC_C_0_7_V (2 << 0) # define DAC_C_MASK (3 << 0) /* * CSC coefficients are stored in a floating point format with 9 bits of * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with * -1 (0x3) being the only legal negative value. */ #define TV_CSC_Y 0x68010 # define TV_RY_MASK 0x07ff0000 # define TV_RY_SHIFT 16 # define TV_GY_MASK 0x00000fff # define TV_GY_SHIFT 0 #define TV_CSC_Y2 0x68014 # define TV_BY_MASK 0x07ff0000 # define TV_BY_SHIFT 16 /* * Y attenuation for component video. * * Stored in 1.9 fixed point. */ # define TV_AY_MASK 0x000003ff # define TV_AY_SHIFT 0 #define TV_CSC_U 0x68018 # define TV_RU_MASK 0x07ff0000 # define TV_RU_SHIFT 16 # define TV_GU_MASK 0x000007ff # define TV_GU_SHIFT 0 #define TV_CSC_U2 0x6801c # define TV_BU_MASK 0x07ff0000 # define TV_BU_SHIFT 16 /* * U attenuation for component video. * * Stored in 1.9 fixed point. */ # define TV_AU_MASK 0x000003ff # define TV_AU_SHIFT 0 #define TV_CSC_V 0x68020 # define TV_RV_MASK 0x0fff0000 # define TV_RV_SHIFT 16 # define TV_GV_MASK 0x000007ff # define TV_GV_SHIFT 0 #define TV_CSC_V2 0x68024 # define TV_BV_MASK 0x07ff0000 # define TV_BV_SHIFT 16 /* * V attenuation for component video. * * Stored in 1.9 fixed point. */ # define TV_AV_MASK 0x000007ff # define TV_AV_SHIFT 0 #define TV_CLR_KNOBS 0x68028 /* 2s-complement brightness adjustment */ # define TV_BRIGHTNESS_MASK 0xff000000 # define TV_BRIGHTNESS_SHIFT 24 /* Contrast adjustment, as a 2.6 unsigned floating point number */ # define TV_CONTRAST_MASK 0x00ff0000 # define TV_CONTRAST_SHIFT 16 /* Saturation adjustment, as a 2.6 unsigned floating point number */ # define TV_SATURATION_MASK 0x0000ff00 # define TV_SATURATION_SHIFT 8 /* Hue adjustment, as an integer phase angle in degrees */ # define TV_HUE_MASK 0x000000ff # define TV_HUE_SHIFT 0 #define TV_CLR_LEVEL 0x6802c /* Controls the DAC level for black */ # define TV_BLACK_LEVEL_MASK 0x01ff0000 # define TV_BLACK_LEVEL_SHIFT 16 /* Controls the DAC level for blanking */ # define TV_BLANK_LEVEL_MASK 0x000001ff # define TV_BLANK_LEVEL_SHIFT 0 #define TV_H_CTL_1 0x68030 /* Number of pixels in the hsync. */ # define TV_HSYNC_END_MASK 0x1fff0000 # define TV_HSYNC_END_SHIFT 16 /* Total number of pixels minus one in the line (display and blanking). */ # define TV_HTOTAL_MASK 0x00001fff # define TV_HTOTAL_SHIFT 0 #define TV_H_CTL_2 0x68034 /* Enables the colorburst (needed for non-component color) */ # define TV_BURST_ENA (1 << 31) /* Offset of the colorburst from the start of hsync, in pixels minus one. */ # define TV_HBURST_START_SHIFT 16 # define TV_HBURST_START_MASK 0x1fff0000 /* Length of the colorburst */ # define TV_HBURST_LEN_SHIFT 0 # define TV_HBURST_LEN_MASK 0x0001fff #define TV_H_CTL_3 0x68038 /* End of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_END_SHIFT 16 # define TV_HBLANK_END_MASK 0x1fff0000 /* Start of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_START_SHIFT 0 # define TV_HBLANK_START_MASK 0x0001fff #define TV_V_CTL_1 0x6803c /* XXX */ # define TV_NBR_END_SHIFT 16 # define TV_NBR_END_MASK 0x07ff0000 /* XXX */ # define TV_VI_END_F1_SHIFT 8 # define TV_VI_END_F1_MASK 0x00003f00 /* XXX */ # define TV_VI_END_F2_SHIFT 0 # define TV_VI_END_F2_MASK 0x0000003f #define TV_V_CTL_2 0x68040 /* Length of vsync, in half lines */ # define TV_VSYNC_LEN_MASK 0x07ff0000 # define TV_VSYNC_LEN_SHIFT 16 /* Offset of the start of vsync in field 1, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F1_MASK 0x00007f00 # define TV_VSYNC_START_F1_SHIFT 8 /* * Offset of the start of vsync in field 2, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F2_MASK 0x0000007f # define TV_VSYNC_START_F2_SHIFT 0 #define TV_V_CTL_3 0x68044 /* Enables generation of the equalization signal */ # define TV_EQUAL_ENA (1 << 31) /* Length of vsync, in half lines */ # define TV_VEQ_LEN_MASK 0x007f0000 # define TV_VEQ_LEN_SHIFT 16 /* Offset of the start of equalization in field 1, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F1_MASK 0x0007f00 # define TV_VEQ_START_F1_SHIFT 8 /* * Offset of the start of equalization in field 2, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F2_MASK 0x000007f # define TV_VEQ_START_F2_SHIFT 0 #define TV_V_CTL_4 0x68048 /* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F1_MASK 0x003f0000 # define TV_VBURST_START_F1_SHIFT 16 /* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F1_MASK 0x000000ff # define TV_VBURST_END_F1_SHIFT 0 #define TV_V_CTL_5 0x6804c /* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F2_MASK 0x003f0000 # define TV_VBURST_START_F2_SHIFT 16 /* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F2_MASK 0x000000ff # define TV_VBURST_END_F2_SHIFT 0 #define TV_V_CTL_6 0x68050 /* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F3_MASK 0x003f0000 # define TV_VBURST_START_F3_SHIFT 16 /* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F3_MASK 0x000000ff # define TV_VBURST_END_F3_SHIFT 0 #define TV_V_CTL_7 0x68054 /* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F4_MASK 0x003f0000 # define TV_VBURST_START_F4_SHIFT 16 /* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F4_MASK 0x000000ff # define TV_VBURST_END_F4_SHIFT 0 #define TV_SC_CTL_1 0x68060 /* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA1_EN (1 << 31) /* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA2_EN (1 << 30) /* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA3_EN (1 << 29) /* Sets the subcarrier DDA to reset frequency every other field */ # define TV_SC_RESET_EVERY_2 (0 << 24) /* Sets the subcarrier DDA to reset frequency every fourth field */ # define TV_SC_RESET_EVERY_4 (1 << 24) /* Sets the subcarrier DDA to reset frequency every eighth field */ # define TV_SC_RESET_EVERY_8 (2 << 24) /* Sets the subcarrier DDA to never reset the frequency */ # define TV_SC_RESET_NEVER (3 << 24) /* Sets the peak amplitude of the colorburst.*/ # define TV_BURST_LEVEL_MASK 0x00ff0000 # define TV_BURST_LEVEL_SHIFT 16 /* Sets the increment of the first subcarrier phase generation DDA */ # define TV_SCDDA1_INC_MASK 0x00000fff # define TV_SCDDA1_INC_SHIFT 0 #define TV_SC_CTL_2 0x68064 /* Sets the rollover for the second subcarrier phase generation DDA */ # define TV_SCDDA2_SIZE_MASK 0x7fff0000 # define TV_SCDDA2_SIZE_SHIFT 16 /* Sets the increent of the second subcarrier phase generation DDA */ # define TV_SCDDA2_INC_MASK 0x00007fff # define TV_SCDDA2_INC_SHIFT 0 #define TV_SC_CTL_3 0x68068 /* Sets the rollover for the third subcarrier phase generation DDA */ # define TV_SCDDA3_SIZE_MASK 0x7fff0000 # define TV_SCDDA3_SIZE_SHIFT 16 /* Sets the increent of the third subcarrier phase generation DDA */ # define TV_SCDDA3_INC_MASK 0x00007fff # define TV_SCDDA3_INC_SHIFT 0 #define TV_WIN_POS 0x68070 /* X coordinate of the display from the start of horizontal active */ # define TV_XPOS_MASK 0x1fff0000 # define TV_XPOS_SHIFT 16 /* Y coordinate of the display from the start of vertical active (NBR) */ # define TV_YPOS_MASK 0x00000fff # define TV_YPOS_SHIFT 0 #define TV_WIN_SIZE 0x68074 /* Horizontal size of the display window, measured in pixels*/ # define TV_XSIZE_MASK 0x1fff0000 # define TV_XSIZE_SHIFT 16 /* * Vertical size of the display window, measured in pixels. * * Must be even for interlaced modes. */ # define TV_YSIZE_MASK 0x00000fff # define TV_YSIZE_SHIFT 0 #define TV_FILTER_CTL_1 0x68080 /* * Enables automatic scaling calculation. * * If set, the rest of the registers are ignored, and the calculated values can * be read back from the register. */ # define TV_AUTO_SCALE (1 << 31) /* * Disables the vertical filter. * * This is required on modes more than 1024 pixels wide */ # define TV_V_FILTER_BYPASS (1 << 29) /* Enables adaptive vertical filtering */ # define TV_VADAPT (1 << 28) # define TV_VADAPT_MODE_MASK (3 << 26) /* Selects the least adaptive vertical filtering mode */ # define TV_VADAPT_MODE_LEAST (0 << 26) /* Selects the moderately adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MODERATE (1 << 26) /* Selects the most adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MOST (3 << 26) /* * Sets the horizontal scaling factor. * * This should be the fractional part of the horizontal scaling factor divided * by the oversampling rate. TV_HSCALE should be less than 1, and set to: * * (src width - 1) / ((oversample * dest width) - 1) */ # define TV_HSCALE_FRAC_MASK 0x00003fff # define TV_HSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_2 0x68084 /* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) */ # define TV_VSCALE_INT_MASK 0x00038000 # define TV_VSCALE_INT_SHIFT 15 /* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * \sa TV_VSCALE_INT_MASK */ # define TV_VSCALE_FRAC_MASK 0x00007fff # define TV_VSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_3 0x68088 /* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) * * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. */ # define TV_VSCALE_IP_INT_MASK 0x00038000 # define TV_VSCALE_IP_INT_SHIFT 15 /* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. * * \sa TV_VSCALE_IP_INT_MASK */ # define TV_VSCALE_IP_FRAC_MASK 0x00007fff # define TV_VSCALE_IP_FRAC_SHIFT 0 #define TV_CC_CONTROL 0x68090 # define TV_CC_ENABLE (1 << 31) /* * Specifies which field to send the CC data in. * * CC data is usually sent in field 0. */ # define TV_CC_FID_MASK (1 << 27) # define TV_CC_FID_SHIFT 27 /* Sets the horizontal position of the CC data. Usually 135. */ # define TV_CC_HOFF_MASK 0x03ff0000 # define TV_CC_HOFF_SHIFT 16 /* Sets the vertical position of the CC data. Usually 21 */ # define TV_CC_LINE_MASK 0x0000003f # define TV_CC_LINE_SHIFT 0 #define TV_CC_DATA 0x68094 # define TV_CC_RDY (1 << 31) /* Second word of CC data to be transmitted. */ # define TV_CC_DATA_2_MASK 0x007f0000 # define TV_CC_DATA_2_SHIFT 16 /* First word of CC data to be transmitted. */ # define TV_CC_DATA_1_MASK 0x0000007f # define TV_CC_DATA_1_SHIFT 0 #define TV_H_LUMA_0 0x68100 #define TV_H_LUMA_59 0x681ec #define TV_H_CHROMA_0 0x68200 #define TV_H_CHROMA_59 0x682ec #define TV_V_LUMA_0 0x68300 #define TV_V_LUMA_42 0x683a8 #define TV_V_CHROMA_0 0x68400 #define TV_V_CHROMA_42 0x684a8 /* Display Port */ #define DP_A 0x64000 /* eDP */ #define DP_B 0x64100 #define DP_C 0x64200 #define DP_D 0x64300 #define DP_PORT_EN (1 << 31) #define DP_PIPEB_SELECT (1 << 30) #define DP_PIPE_MASK (1 << 30) #define DP_PIPE_SELECT_CHV(pipe) ((pipe) << 16) #define DP_PIPE_MASK_CHV (3 << 16) /* Link training mode - select a suitable mode for each stage */ #define DP_LINK_TRAIN_PAT_1 (0 << 28) #define DP_LINK_TRAIN_PAT_2 (1 << 28) #define DP_LINK_TRAIN_PAT_IDLE (2 << 28) #define DP_LINK_TRAIN_OFF (3 << 28) #define DP_LINK_TRAIN_MASK (3 << 28) #define DP_LINK_TRAIN_SHIFT 28 #define DP_LINK_TRAIN_PAT_3_CHV (1 << 14) #define DP_LINK_TRAIN_MASK_CHV ((3 << 28)|(1<<14)) /* CPT Link training mode */ #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8) #define DP_LINK_TRAIN_PAT_2_CPT (1 << 8) #define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8) #define DP_LINK_TRAIN_OFF_CPT (3 << 8) #define DP_LINK_TRAIN_MASK_CPT (7 << 8) #define DP_LINK_TRAIN_SHIFT_CPT 8 /* Signal voltages. These are mostly controlled by the other end */ #define DP_VOLTAGE_0_4 (0 << 25) #define DP_VOLTAGE_0_6 (1 << 25) #define DP_VOLTAGE_0_8 (2 << 25) #define DP_VOLTAGE_1_2 (3 << 25) #define DP_VOLTAGE_MASK (7 << 25) #define DP_VOLTAGE_SHIFT 25 /* Signal pre-emphasis levels, like voltages, the other end tells us what * they want */ #define DP_PRE_EMPHASIS_0 (0 << 22) #define DP_PRE_EMPHASIS_3_5 (1 << 22) #define DP_PRE_EMPHASIS_6 (2 << 22) #define DP_PRE_EMPHASIS_9_5 (3 << 22) #define DP_PRE_EMPHASIS_MASK (7 << 22) #define DP_PRE_EMPHASIS_SHIFT 22 /* How many wires to use. I guess 3 was too hard */ #define DP_PORT_WIDTH(width) (((width) - 1) << 19) #define DP_PORT_WIDTH_MASK (7 << 19) /* Mystic DPCD version 1.1 special mode */ #define DP_ENHANCED_FRAMING (1 << 18) /* eDP */ #define DP_PLL_FREQ_270MHZ (0 << 16) #define DP_PLL_FREQ_160MHZ (1 << 16) #define DP_PLL_FREQ_MASK (3 << 16) /* locked once port is enabled */ #define DP_PORT_REVERSAL (1 << 15) /* eDP */ #define DP_PLL_ENABLE (1 << 14) /* sends the clock on lane 15 of the PEG for debug */ #define DP_CLOCK_OUTPUT_ENABLE (1 << 13) #define DP_SCRAMBLING_DISABLE (1 << 12) #define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) /* limit RGB values to avoid confusing TVs */ #define DP_COLOR_RANGE_16_235 (1 << 8) /* Turn on the audio link */ #define DP_AUDIO_OUTPUT_ENABLE (1 << 6) /* vs and hs sync polarity */ #define DP_SYNC_VS_HIGH (1 << 4) #define DP_SYNC_HS_HIGH (1 << 3) /* A fantasy */ #define DP_DETECTED (1 << 2) /* The aux channel provides a way to talk to the * signal sink for DDC etc. Max packet size supported * is 20 bytes in each direction, hence the 5 fixed * data registers */ #define DPA_AUX_CH_CTL 0x64010 #define DPA_AUX_CH_DATA1 0x64014 #define DPA_AUX_CH_DATA2 0x64018 #define DPA_AUX_CH_DATA3 0x6401c #define DPA_AUX_CH_DATA4 0x64020 #define DPA_AUX_CH_DATA5 0x64024 #define DPB_AUX_CH_CTL 0x64110 #define DPB_AUX_CH_DATA1 0x64114 #define DPB_AUX_CH_DATA2 0x64118 #define DPB_AUX_CH_DATA3 0x6411c #define DPB_AUX_CH_DATA4 0x64120 #define DPB_AUX_CH_DATA5 0x64124 #define DPC_AUX_CH_CTL 0x64210 #define DPC_AUX_CH_DATA1 0x64214 #define DPC_AUX_CH_DATA2 0x64218 #define DPC_AUX_CH_DATA3 0x6421c #define DPC_AUX_CH_DATA4 0x64220 #define DPC_AUX_CH_DATA5 0x64224 #define DPD_AUX_CH_CTL 0x64310 #define DPD_AUX_CH_DATA1 0x64314 #define DPD_AUX_CH_DATA2 0x64318 #define DPD_AUX_CH_DATA3 0x6431c #define DPD_AUX_CH_DATA4 0x64320 #define DPD_AUX_CH_DATA5 0x64324 #define DP_AUX_CH_CTL_SEND_BUSY (1 << 31) #define DP_AUX_CH_CTL_DONE (1 << 30) #define DP_AUX_CH_CTL_INTERRUPT (1 << 29) #define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28) #define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26) #define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26) #define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26) #define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26) #define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26) #define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25) #define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20) #define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20 #define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16) #define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16 #define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15) #define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14) #define DP_AUX_CH_CTL_SYNC_TEST (1 << 13) #define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12) #define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11) #define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff) #define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0 /* * Computing GMCH M and N values for the Display Port link * * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes * * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) * * The GMCH value is used internally * * bytes_per_pixel is the number of bytes coming out of the plane, * which is after the LUTs, so we want the bytes for our color format. * For our current usage, this is always 3, one byte for R, G and B. */ #define _PIPEA_DATA_M_G4X 0x70050 #define _PIPEB_DATA_M_G4X 0x71050 /* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ #define TU_SIZE_SHIFT 25 #define TU_SIZE_MASK (0x3f << 25) #define DATA_LINK_M_N_MASK (0xffffff) #define DATA_LINK_N_MAX (0x800000) #define _PIPEA_DATA_N_G4X 0x70054 #define _PIPEB_DATA_N_G4X 0x71054 #define PIPE_GMCH_DATA_N_MASK (0xffffff) /* * Computing Link M and N values for the Display Port link * * Link M / N = pixel_clock / ls_clk * * (the DP spec calls pixel_clock the 'strm_clk') * * The Link value is transmitted in the Main Stream * Attributes and VB-ID. */ #define _PIPEA_LINK_M_G4X 0x70060 #define _PIPEB_LINK_M_G4X 0x71060 #define PIPEA_DP_LINK_M_MASK (0xffffff) #define _PIPEA_LINK_N_G4X 0x70064 #define _PIPEB_LINK_N_G4X 0x71064 #define PIPEA_DP_LINK_N_MASK (0xffffff) #define PIPE_DATA_M_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_M_G4X, _PIPEB_DATA_M_G4X) #define PIPE_DATA_N_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_N_G4X, _PIPEB_DATA_N_G4X) #define PIPE_LINK_M_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_M_G4X, _PIPEB_LINK_M_G4X) #define PIPE_LINK_N_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_N_G4X, _PIPEB_LINK_N_G4X) /* Display & cursor control */ /* Pipe A */ #define _PIPEADSL 0x70000 #define DSL_LINEMASK_GEN2 0x00000fff #define DSL_LINEMASK_GEN3 0x00001fff #define _PIPEACONF 0x70008 #define PIPECONF_ENABLE (1<<31) #define PIPECONF_DISABLE 0 #define PIPECONF_DOUBLE_WIDE (1<<30) #define I965_PIPECONF_ACTIVE (1<<30) #define PIPECONF_DSI_PLL_LOCKED (1<<29) /* vlv & pipe A only */ #define PIPECONF_FRAME_START_DELAY_MASK (3<<27) #define PIPECONF_SINGLE_WIDE 0 #define PIPECONF_PIPE_UNLOCKED 0 #define PIPECONF_PIPE_LOCKED (1<<25) #define PIPECONF_PALETTE 0 #define PIPECONF_GAMMA (1<<24) #define PIPECONF_FORCE_BORDER (1<<25) #define PIPECONF_INTERLACE_MASK (7 << 21) #define PIPECONF_INTERLACE_MASK_HSW (3 << 21) /* Note that pre-gen3 does not support interlaced display directly. Panel * fitting must be disabled on pre-ilk for interlaced. */ #define PIPECONF_PROGRESSIVE (0 << 21) #define PIPECONF_INTERLACE_W_SYNC_SHIFT_PANEL (4 << 21) /* gen4 only */ #define PIPECONF_INTERLACE_W_SYNC_SHIFT (5 << 21) /* gen4 only */ #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) #define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) /* gen3 only */ /* Ironlake and later have a complete new set of values for interlaced. PFIT * means panel fitter required, PF means progressive fetch, DBL means power * saving pixel doubling. */ #define PIPECONF_PFIT_PF_INTERLACED_ILK (1 << 21) #define PIPECONF_INTERLACED_ILK (3 << 21) #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ #define PIPECONF_INTERLACE_MODE_MASK (7 << 21) #define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20) #define PIPECONF_CXSR_DOWNCLOCK (1<<16) #define PIPECONF_COLOR_RANGE_SELECT (1 << 13) #define PIPECONF_BPC_MASK (0x7 << 5) #define PIPECONF_8BPC (0<<5) #define PIPECONF_10BPC (1<<5) #define PIPECONF_6BPC (2<<5) #define PIPECONF_12BPC (3<<5) #define PIPECONF_DITHER_EN (1<<4) #define PIPECONF_DITHER_TYPE_MASK (0x0000000c) #define PIPECONF_DITHER_TYPE_SP (0<<2) #define PIPECONF_DITHER_TYPE_ST1 (1<<2) #define PIPECONF_DITHER_TYPE_ST2 (2<<2) #define PIPECONF_DITHER_TYPE_TEMP (3<<2) #define _PIPEASTAT 0x70024 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) #define SPRITE1_FLIP_DONE_INT_EN_VLV (1UL<<30) #define PIPE_CRC_ERROR_ENABLE (1UL<<29) #define PIPE_CRC_DONE_ENABLE (1UL<<28) #define PERF_COUNTER2_INTERRUPT_EN (1UL<<27) #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) #define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) #define PIPE_DPST_EVENT_ENABLE (1UL<<23) #define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<22) #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) #define PIPE_B_PSR_INTERRUPT_ENABLE_VLV (1UL<<19) #define PERF_COUNTER_INTERRUPT_EN (1UL<<19) #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ #define PIPE_FRAMESTART_INTERRUPT_ENABLE (1UL<<17) #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) #define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) #define SPRITE1_FLIP_DONE_INT_STATUS_VLV (1UL<<15) #define SPRITE0_FLIP_DONE_INT_STATUS_VLV (1UL<<14) #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) #define PERF_COUNTER2_INTERRUPT_STATUS (1UL<<11) #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) #define PLANE_FLIP_DONE_INT_STATUS_VLV (1UL<<10) #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) #define PIPE_DPST_EVENT_STATUS (1UL<<7) #define PIPE_A_PSR_STATUS_VLV (1UL<<6) #define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) #define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) #define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) #define PIPE_B_PSR_STATUS_VLV (1UL<<3) #define PERF_COUNTER_INTERRUPT_STATUS (1UL<<3) #define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ #define PIPE_FRAMESTART_INTERRUPT_STATUS (1UL<<1) #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) #define PIPE_HBLANK_INT_STATUS (1UL<<0) #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) #define PIPESTAT_INT_ENABLE_MASK 0x7fff0000 #define PIPESTAT_INT_STATUS_MASK 0x0000ffff #define PIPE_A_OFFSET 0x70000 #define PIPE_B_OFFSET 0x71000 #define PIPE_C_OFFSET 0x72000 #define CHV_PIPE_C_OFFSET 0x74000 /* * There's actually no pipe EDP. Some pipe registers have * simply shifted from the pipe to the transcoder, while * keeping their original offset. Thus we need PIPE_EDP_OFFSET * to access such registers in transcoder EDP. */ #define PIPE_EDP_OFFSET 0x7f000 #define _PIPE2(pipe, reg) (dev_priv->info.pipe_offsets[pipe] - \ dev_priv->info.pipe_offsets[PIPE_A] + (reg) + \ dev_priv->info.display_mmio_offset) #define PIPECONF(pipe) _PIPE2(pipe, _PIPEACONF) #define PIPEDSL(pipe) _PIPE2(pipe, _PIPEADSL) #define PIPEFRAME(pipe) _PIPE2(pipe, _PIPEAFRAMEHIGH) #define PIPEFRAMEPIXEL(pipe) _PIPE2(pipe, _PIPEAFRAMEPIXEL) #define PIPESTAT(pipe) _PIPE2(pipe, _PIPEASTAT) #define _PIPE_MISC_A 0x70030 #define _PIPE_MISC_B 0x71030 #define PIPEMISC_DITHER_BPC_MASK (7<<5) #define PIPEMISC_DITHER_8_BPC (0<<5) #define PIPEMISC_DITHER_10_BPC (1<<5) #define PIPEMISC_DITHER_6_BPC (2<<5) #define PIPEMISC_DITHER_12_BPC (3<<5) #define PIPEMISC_DITHER_ENABLE (1<<4) #define PIPEMISC_DITHER_TYPE_MASK (3<<2) #define PIPEMISC_DITHER_TYPE_SP (0<<2) #define PIPEMISC(pipe) _PIPE2(pipe, _PIPE_MISC_A) #define VLV_DPFLIPSTAT (VLV_DISPLAY_BASE + 0x70028) #define PIPEB_LINE_COMPARE_INT_EN (1<<29) #define PIPEB_HLINE_INT_EN (1<<28) #define PIPEB_VBLANK_INT_EN (1<<27) #define SPRITED_FLIP_DONE_INT_EN (1<<26) #define SPRITEC_FLIP_DONE_INT_EN (1<<25) #define PLANEB_FLIP_DONE_INT_EN (1<<24) #define PIPE_PSR_INT_EN (1<<22) #define PIPEA_LINE_COMPARE_INT_EN (1<<21) #define PIPEA_HLINE_INT_EN (1<<20) #define PIPEA_VBLANK_INT_EN (1<<19) #define SPRITEB_FLIP_DONE_INT_EN (1<<18) #define SPRITEA_FLIP_DONE_INT_EN (1<<17) #define PLANEA_FLIPDONE_INT_EN (1<<16) #define PIPEC_LINE_COMPARE_INT_EN (1<<13) #define PIPEC_HLINE_INT_EN (1<<12) #define PIPEC_VBLANK_INT_EN (1<<11) #define SPRITEF_FLIPDONE_INT_EN (1<<10) #define SPRITEE_FLIPDONE_INT_EN (1<<9) #define PLANEC_FLIPDONE_INT_EN (1<<8) #define DPINVGTT (VLV_DISPLAY_BASE + 0x7002c) /* VLV/CHV only */ #define SPRITEF_INVALID_GTT_INT_EN (1<<27) #define SPRITEE_INVALID_GTT_INT_EN (1<<26) #define PLANEC_INVALID_GTT_INT_EN (1<<25) #define CURSORC_INVALID_GTT_INT_EN (1<<24) #define CURSORB_INVALID_GTT_INT_EN (1<<23) #define CURSORA_INVALID_GTT_INT_EN (1<<22) #define SPRITED_INVALID_GTT_INT_EN (1<<21) #define SPRITEC_INVALID_GTT_INT_EN (1<<20) #define PLANEB_INVALID_GTT_INT_EN (1<<19) #define SPRITEB_INVALID_GTT_INT_EN (1<<18) #define SPRITEA_INVALID_GTT_INT_EN (1<<17) #define PLANEA_INVALID_GTT_INT_EN (1<<16) #define DPINVGTT_EN_MASK 0xff0000 #define DPINVGTT_EN_MASK_CHV 0xfff0000 #define SPRITEF_INVALID_GTT_STATUS (1<<11) #define SPRITEE_INVALID_GTT_STATUS (1<<10) #define PLANEC_INVALID_GTT_STATUS (1<<9) #define CURSORC_INVALID_GTT_STATUS (1<<8) #define CURSORB_INVALID_GTT_STATUS (1<<7) #define CURSORA_INVALID_GTT_STATUS (1<<6) #define SPRITED_INVALID_GTT_STATUS (1<<5) #define SPRITEC_INVALID_GTT_STATUS (1<<4) #define PLANEB_INVALID_GTT_STATUS (1<<3) #define SPRITEB_INVALID_GTT_STATUS (1<<2) #define SPRITEA_INVALID_GTT_STATUS (1<<1) #define PLANEA_INVALID_GTT_STATUS (1<<0) #define DPINVGTT_STATUS_MASK 0xff #define DPINVGTT_STATUS_MASK_CHV 0xfff #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) #define DSPARB_CSTART_SHIFT 7 #define DSPARB_BSTART_MASK (0x7f) #define DSPARB_BSTART_SHIFT 0 #define DSPARB_BEND_SHIFT 9 /* on 855 */ #define DSPARB_AEND_SHIFT 0 /* pnv/gen4/g4x/vlv/chv */ #define DSPFW1 (dev_priv->info.display_mmio_offset + 0x70034) #define DSPFW_SR_SHIFT 23 #define DSPFW_SR_MASK (0x1ff<<23) #define DSPFW_CURSORB_SHIFT 16 #define DSPFW_CURSORB_MASK (0x3f<<16) #define DSPFW_PLANEB_SHIFT 8 #define DSPFW_PLANEB_MASK (0x7f<<8) #define DSPFW_PLANEB_MASK_VLV (0xff<<8) /* vlv/chv */ #define DSPFW_PLANEA_SHIFT 0 #define DSPFW_PLANEA_MASK (0x7f<<0) #define DSPFW_PLANEA_MASK_VLV (0xff<<0) /* vlv/chv */ #define DSPFW2 (dev_priv->info.display_mmio_offset + 0x70038) #define DSPFW_FBC_SR_EN (1<<31) /* g4x */ #define DSPFW_FBC_SR_SHIFT 28 #define DSPFW_FBC_SR_MASK (0x7<<28) /* g4x */ #define DSPFW_FBC_HPLL_SR_SHIFT 24 #define DSPFW_FBC_HPLL_SR_MASK (0xf<<24) /* g4x */ #define DSPFW_SPRITEB_SHIFT (16) #define DSPFW_SPRITEB_MASK (0x7f<<16) /* g4x */ #define DSPFW_SPRITEB_MASK_VLV (0xff<<16) /* vlv/chv */ #define DSPFW_CURSORA_SHIFT 8 #define DSPFW_CURSORA_MASK (0x3f<<8) #define DSPFW_PLANEC_SHIFT_OLD 0 #define DSPFW_PLANEC_MASK_OLD (0x7f<<0) /* pre-gen4 sprite C */ #define DSPFW_SPRITEA_SHIFT 0 #define DSPFW_SPRITEA_MASK (0x7f<<0) /* g4x */ #define DSPFW_SPRITEA_MASK_VLV (0xff<<0) /* vlv/chv */ #define DSPFW3 (dev_priv->info.display_mmio_offset + 0x7003c) #define DSPFW_HPLL_SR_EN (1<<31) #define PINEVIEW_SELF_REFRESH_EN (1<<30) #define DSPFW_CURSOR_SR_SHIFT 24 #define DSPFW_CURSOR_SR_MASK (0x3f<<24) #define DSPFW_HPLL_CURSOR_SHIFT 16 #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) #define DSPFW_HPLL_SR_SHIFT 0 #define DSPFW_HPLL_SR_MASK (0x1ff<<0) /* vlv/chv */ #define DSPFW4 (VLV_DISPLAY_BASE + 0x70070) #define DSPFW_SPRITEB_WM1_SHIFT 16 #define DSPFW_SPRITEB_WM1_MASK (0xff<<16) #define DSPFW_CURSORA_WM1_SHIFT 8 #define DSPFW_CURSORA_WM1_MASK (0x3f<<8) #define DSPFW_SPRITEA_WM1_SHIFT 0 #define DSPFW_SPRITEA_WM1_MASK (0xff<<0) #define DSPFW5 (VLV_DISPLAY_BASE + 0x70074) #define DSPFW_PLANEB_WM1_SHIFT 24 #define DSPFW_PLANEB_WM1_MASK (0xff<<24) #define DSPFW_PLANEA_WM1_SHIFT 16 #define DSPFW_PLANEA_WM1_MASK (0xff<<16) #define DSPFW_CURSORB_WM1_SHIFT 8 #define DSPFW_CURSORB_WM1_MASK (0x3f<<8) #define DSPFW_CURSOR_SR_WM1_SHIFT 0 #define DSPFW_CURSOR_SR_WM1_MASK (0x3f<<0) #define DSPFW6 (VLV_DISPLAY_BASE + 0x70078) #define DSPFW_SR_WM1_SHIFT 0 #define DSPFW_SR_WM1_MASK (0x1ff<<0) #define DSPFW7 (VLV_DISPLAY_BASE + 0x7007c) #define DSPFW7_CHV (VLV_DISPLAY_BASE + 0x700b4) /* wtf #1? */ #define DSPFW_SPRITED_WM1_SHIFT 24 #define DSPFW_SPRITED_WM1_MASK (0xff<<24) #define DSPFW_SPRITED_SHIFT 16 #define DSPFW_SPRITED_MASK (0xff<<16) #define DSPFW_SPRITEC_WM1_SHIFT 8 #define DSPFW_SPRITEC_WM1_MASK (0xff<<8) #define DSPFW_SPRITEC_SHIFT 0 #define DSPFW_SPRITEC_MASK (0xff<<0) #define DSPFW8_CHV (VLV_DISPLAY_BASE + 0x700b8) #define DSPFW_SPRITEF_WM1_SHIFT 24 #define DSPFW_SPRITEF_WM1_MASK (0xff<<24) #define DSPFW_SPRITEF_SHIFT 16 #define DSPFW_SPRITEF_MASK (0xff<<16) #define DSPFW_SPRITEE_WM1_SHIFT 8 #define DSPFW_SPRITEE_WM1_MASK (0xff<<8) #define DSPFW_SPRITEE_SHIFT 0 #define DSPFW_SPRITEE_MASK (0xff<<0) #define DSPFW9_CHV (VLV_DISPLAY_BASE + 0x7007c) /* wtf #2? */ #define DSPFW_PLANEC_WM1_SHIFT 24 #define DSPFW_PLANEC_WM1_MASK (0xff<<24) #define DSPFW_PLANEC_SHIFT 16 #define DSPFW_PLANEC_MASK (0xff<<16) #define DSPFW_CURSORC_WM1_SHIFT 8 #define DSPFW_CURSORC_WM1_MASK (0x3f<<16) #define DSPFW_CURSORC_SHIFT 0 #define DSPFW_CURSORC_MASK (0x3f<<0) /* vlv/chv high order bits */ #define DSPHOWM (VLV_DISPLAY_BASE + 0x70064) #define DSPFW_SR_HI_SHIFT 24 #define DSPFW_SR_HI_MASK (1<<24) #define DSPFW_SPRITEF_HI_SHIFT 23 #define DSPFW_SPRITEF_HI_MASK (1<<23) #define DSPFW_SPRITEE_HI_SHIFT 22 #define DSPFW_SPRITEE_HI_MASK (1<<22) #define DSPFW_PLANEC_HI_SHIFT 21 #define DSPFW_PLANEC_HI_MASK (1<<21) #define DSPFW_SPRITED_HI_SHIFT 20 #define DSPFW_SPRITED_HI_MASK (1<<20) #define DSPFW_SPRITEC_HI_SHIFT 16 #define DSPFW_SPRITEC_HI_MASK (1<<16) #define DSPFW_PLANEB_HI_SHIFT 12 #define DSPFW_PLANEB_HI_MASK (1<<12) #define DSPFW_SPRITEB_HI_SHIFT 8 #define DSPFW_SPRITEB_HI_MASK (1<<8) #define DSPFW_SPRITEA_HI_SHIFT 4 #define DSPFW_SPRITEA_HI_MASK (1<<4) #define DSPFW_PLANEA_HI_SHIFT 0 #define DSPFW_PLANEA_HI_MASK (1<<0) #define DSPHOWM1 (VLV_DISPLAY_BASE + 0x70068) #define DSPFW_SR_WM1_HI_SHIFT 24 #define DSPFW_SR_WM1_HI_MASK (1<<24) #define DSPFW_SPRITEF_WM1_HI_SHIFT 23 #define DSPFW_SPRITEF_WM1_HI_MASK (1<<23) #define DSPFW_SPRITEE_WM1_HI_SHIFT 22 #define DSPFW_SPRITEE_WM1_HI_MASK (1<<22) #define DSPFW_PLANEC_WM1_HI_SHIFT 21 #define DSPFW_PLANEC_WM1_HI_MASK (1<<21) #define DSPFW_SPRITED_WM1_HI_SHIFT 20 #define DSPFW_SPRITED_WM1_HI_MASK (1<<20) #define DSPFW_SPRITEC_WM1_HI_SHIFT 16 #define DSPFW_SPRITEC_WM1_HI_MASK (1<<16) #define DSPFW_PLANEB_WM1_HI_SHIFT 12 #define DSPFW_PLANEB_WM1_HI_MASK (1<<12) #define DSPFW_SPRITEB_WM1_HI_SHIFT 8 #define DSPFW_SPRITEB_WM1_HI_MASK (1<<8) #define DSPFW_SPRITEA_WM1_HI_SHIFT 4 #define DSPFW_SPRITEA_WM1_HI_MASK (1<<4) #define DSPFW_PLANEA_WM1_HI_SHIFT 0 #define DSPFW_PLANEA_WM1_HI_MASK (1<<0) /* drain latency register values*/ #define DRAIN_LATENCY_PRECISION_32 32 #define DRAIN_LATENCY_PRECISION_64 64 #define VLV_DDL(pipe) (VLV_DISPLAY_BASE + 0x70050 + 4 * (pipe)) #define DDL_CURSOR_PRECISION_64 (1<<31) #define DDL_CURSOR_PRECISION_32 (0<<31) #define DDL_CURSOR_SHIFT 24 #define DDL_SPRITE_PRECISION_64(sprite) (1<<(15+8*(sprite))) #define DDL_SPRITE_PRECISION_32(sprite) (0<<(15+8*(sprite))) #define DDL_SPRITE_SHIFT(sprite) (8+8*(sprite)) #define DDL_PLANE_PRECISION_64 (1<<7) #define DDL_PLANE_PRECISION_32 (0<<7) #define DDL_PLANE_SHIFT 0 #define DRAIN_LATENCY_MASK 0x7f /* FIFO watermark sizes etc */ #define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 #define VALLEYVIEW_FIFO_SIZE 255 #define G4X_FIFO_SIZE 127 #define I965_FIFO_SIZE 512 #define I945_FIFO_SIZE 127 #define I915_FIFO_SIZE 95 #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 #define VALLEYVIEW_MAX_WM 0xff #define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f #define PINEVIEW_DISPLAY_FIFO 512 /* in 64byte unit */ #define PINEVIEW_FIFO_LINE_SIZE 64 #define PINEVIEW_MAX_WM 0x1ff #define PINEVIEW_DFT_WM 0x3f #define PINEVIEW_DFT_HPLLOFF_WM 0 #define PINEVIEW_GUARD_WM 10 #define PINEVIEW_CURSOR_FIFO 64 #define PINEVIEW_CURSOR_MAX_WM 0x3f #define PINEVIEW_CURSOR_DFT_WM 0 #define PINEVIEW_CURSOR_GUARD_WM 5 #define VALLEYVIEW_CURSOR_MAX_WM 64 #define I965_CURSOR_FIFO 64 #define I965_CURSOR_MAX_WM 32 #define I965_CURSOR_DFT_WM 8 /* define the Watermark register on Ironlake */ #define WM0_PIPEA_ILK 0x45100 #define WM0_PIPE_PLANE_MASK (0xffff<<16) #define WM0_PIPE_PLANE_SHIFT 16 #define WM0_PIPE_SPRITE_MASK (0xff<<8) #define WM0_PIPE_SPRITE_SHIFT 8 #define WM0_PIPE_CURSOR_MASK (0xff) #define WM0_PIPEB_ILK 0x45104 #define WM0_PIPEC_IVB 0x45200 #define WM1_LP_ILK 0x45108 #define WM1_LP_SR_EN (1<<31) #define WM1_LP_LATENCY_SHIFT 24 #define WM1_LP_LATENCY_MASK (0x7f<<24) #define WM1_LP_FBC_MASK (0xf<<20) #define WM1_LP_FBC_SHIFT 20 #define WM1_LP_FBC_SHIFT_BDW 19 #define WM1_LP_SR_MASK (0x7ff<<8) #define WM1_LP_SR_SHIFT 8 #define WM1_LP_CURSOR_MASK (0xff) #define WM2_LP_ILK 0x4510c #define WM2_LP_EN (1<<31) #define WM3_LP_ILK 0x45110 #define WM3_LP_EN (1<<31) #define WM1S_LP_ILK 0x45120 #define WM2S_LP_IVB 0x45124 #define WM3S_LP_IVB 0x45128 #define WM1S_LP_EN (1<<31) #define HSW_WM_LP_VAL(lat, fbc, pri, cur) \ (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \ ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur)) /* Memory latency timer register */ #define MLTR_ILK 0x11222 #define MLTR_WM1_SHIFT 0 #define MLTR_WM2_SHIFT 8 /* the unit of memory self-refresh latency time is 0.5us */ #define ILK_SRLT_MASK 0x3f /* the address where we get all kinds of latency value */ #define SSKPD 0x5d10 #define SSKPD_WM_MASK 0x3f #define SSKPD_WM0_SHIFT 0 #define SSKPD_WM1_SHIFT 8 #define SSKPD_WM2_SHIFT 16 #define SSKPD_WM3_SHIFT 24 /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code * should work: * * do { * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> * PIPE_FRAME_HIGH_SHIFT; * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> * PIPE_FRAME_LOW_SHIFT); * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> * PIPE_FRAME_HIGH_SHIFT); * } while (high1 != high2); * frame = (high1 << 8) | low1; */ #define _PIPEAFRAMEHIGH 0x70040 #define PIPE_FRAME_HIGH_MASK 0x0000ffff #define PIPE_FRAME_HIGH_SHIFT 0 #define _PIPEAFRAMEPIXEL 0x70044 #define PIPE_FRAME_LOW_MASK 0xff000000 #define PIPE_FRAME_LOW_SHIFT 24 #define PIPE_PIXEL_MASK 0x00ffffff #define PIPE_PIXEL_SHIFT 0 /* GM45+ just has to be different */ #define _PIPEA_FRMCOUNT_GM45 0x70040 #define _PIPEA_FLIPCOUNT_GM45 0x70044 #define PIPE_FRMCOUNT_GM45(pipe) _PIPE2(pipe, _PIPEA_FRMCOUNT_GM45) #define PIPE_FLIPCOUNT_GM45(pipe) _PIPE2(pipe, _PIPEA_FLIPCOUNT_GM45) /* Cursor A & B regs */ #define _CURACNTR 0x70080 /* Old style CUR*CNTR flags (desktop 8xx) */ #define CURSOR_ENABLE 0x80000000 #define CURSOR_GAMMA_ENABLE 0x40000000 #define CURSOR_STRIDE_SHIFT 28 #define CURSOR_STRIDE(x) ((ffs(x)-9) << CURSOR_STRIDE_SHIFT) /* 256,512,1k,2k */ #define CURSOR_PIPE_CSC_ENABLE (1<<24) #define CURSOR_FORMAT_SHIFT 24 #define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) #define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) #define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) #define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) #define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) #define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) /* New style CUR*CNTR flags */ #define CURSOR_MODE 0x27 #define CURSOR_MODE_DISABLE 0x00 #define CURSOR_MODE_128_32B_AX 0x02 #define CURSOR_MODE_256_32B_AX 0x03 #define CURSOR_MODE_64_32B_AX 0x07 #define CURSOR_MODE_128_ARGB_AX ((1 << 5) | CURSOR_MODE_128_32B_AX) #define CURSOR_MODE_256_ARGB_AX ((1 << 5) | CURSOR_MODE_256_32B_AX) #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) #define MCURSOR_PIPE_SELECT (1 << 28) #define MCURSOR_PIPE_A 0x00 #define MCURSOR_PIPE_B (1 << 28) #define MCURSOR_GAMMA_ENABLE (1 << 26) #define CURSOR_TRICKLE_FEED_DISABLE (1 << 14) #define _CURABASE 0x70084 #define _CURAPOS 0x70088 #define CURSOR_POS_MASK 0x007FF #define CURSOR_POS_SIGN 0x8000 #define CURSOR_X_SHIFT 0 #define CURSOR_Y_SHIFT 16 #define CURSIZE 0x700a0 #define _CURBCNTR 0x700c0 #define _CURBBASE 0x700c4 #define _CURBPOS 0x700c8 #define _CURBCNTR_IVB 0x71080 #define _CURBBASE_IVB 0x71084 #define _CURBPOS_IVB 0x71088 #define _CURSOR2(pipe, reg) (dev_priv->info.cursor_offsets[(pipe)] - \ dev_priv->info.cursor_offsets[PIPE_A] + (reg) + \ dev_priv->info.display_mmio_offset) #define CURCNTR(pipe) _CURSOR2(pipe, _CURACNTR) #define CURBASE(pipe) _CURSOR2(pipe, _CURABASE) #define CURPOS(pipe) _CURSOR2(pipe, _CURAPOS) #define CURSOR_A_OFFSET 0x70080 #define CURSOR_B_OFFSET 0x700c0 #define CHV_CURSOR_C_OFFSET 0x700e0 #define IVB_CURSOR_B_OFFSET 0x71080 #define IVB_CURSOR_C_OFFSET 0x72080 /* Display A control */ #define _DSPACNTR 0x70180 #define DISPLAY_PLANE_ENABLE (1<<31) #define DISPLAY_PLANE_DISABLE 0 #define DISPPLANE_GAMMA_ENABLE (1<<30) #define DISPPLANE_GAMMA_DISABLE 0 #define DISPPLANE_PIXFORMAT_MASK (0xf<<26) #define DISPPLANE_YUV422 (0x0<<26) #define DISPPLANE_8BPP (0x2<<26) #define DISPPLANE_BGRA555 (0x3<<26) #define DISPPLANE_BGRX555 (0x4<<26) #define DISPPLANE_BGRX565 (0x5<<26) #define DISPPLANE_BGRX888 (0x6<<26) #define DISPPLANE_BGRA888 (0x7<<26) #define DISPPLANE_RGBX101010 (0x8<<26) #define DISPPLANE_RGBA101010 (0x9<<26) #define DISPPLANE_BGRX101010 (0xa<<26) #define DISPPLANE_RGBX161616 (0xc<<26) #define DISPPLANE_RGBX888 (0xe<<26) #define DISPPLANE_RGBA888 (0xf<<26) #define DISPPLANE_STEREO_ENABLE (1<<25) #define DISPPLANE_STEREO_DISABLE 0 #define DISPPLANE_PIPE_CSC_ENABLE (1<<24) #define DISPPLANE_SEL_PIPE_SHIFT 24 #define DISPPLANE_SEL_PIPE_MASK (3<info.display_mmio_offset + 0x71410) #define SWF01 (dev_priv->info.display_mmio_offset + 0x71414) #define SWF02 (dev_priv->info.display_mmio_offset + 0x71418) #define SWF03 (dev_priv->info.display_mmio_offset + 0x7141c) #define SWF04 (dev_priv->info.display_mmio_offset + 0x71420) #define SWF05 (dev_priv->info.display_mmio_offset + 0x71424) #define SWF06 (dev_priv->info.display_mmio_offset + 0x71428) #define SWF10 (dev_priv->info.display_mmio_offset + 0x70410) #define SWF11 (dev_priv->info.display_mmio_offset + 0x70414) #define SWF14 (dev_priv->info.display_mmio_offset + 0x71420) #define SWF30 (dev_priv->info.display_mmio_offset + 0x72414) #define SWF31 (dev_priv->info.display_mmio_offset + 0x72418) #define SWF32 (dev_priv->info.display_mmio_offset + 0x7241c) /* Pipe B */ #define _PIPEBDSL (dev_priv->info.display_mmio_offset + 0x71000) #define _PIPEBCONF (dev_priv->info.display_mmio_offset + 0x71008) #define _PIPEBSTAT (dev_priv->info.display_mmio_offset + 0x71024) #define _PIPEBFRAMEHIGH 0x71040 #define _PIPEBFRAMEPIXEL 0x71044 #define _PIPEB_FRMCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x71040) #define _PIPEB_FLIPCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x71044) /* Display B control */ #define _DSPBCNTR (dev_priv->info.display_mmio_offset + 0x71180) #define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) #define DISPPLANE_ALPHA_TRANS_DISABLE 0 #define DISPPLANE_SPRITE_ABOVE_DISPLAY 0 #define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) #define _DSPBADDR (dev_priv->info.display_mmio_offset + 0x71184) #define _DSPBSTRIDE (dev_priv->info.display_mmio_offset + 0x71188) #define _DSPBPOS (dev_priv->info.display_mmio_offset + 0x7118C) #define _DSPBSIZE (dev_priv->info.display_mmio_offset + 0x71190) #define _DSPBSURF (dev_priv->info.display_mmio_offset + 0x7119C) #define _DSPBTILEOFF (dev_priv->info.display_mmio_offset + 0x711A4) #define _DSPBOFFSET (dev_priv->info.display_mmio_offset + 0x711A4) #define _DSPBSURFLIVE (dev_priv->info.display_mmio_offset + 0x711AC) /* Sprite A control */ #define _DVSACNTR 0x72180 #define DVS_ENABLE (1<<31) #define DVS_GAMMA_ENABLE (1<<30) #define DVS_PIXFORMAT_MASK (3<<25) #define DVS_FORMAT_YUV422 (0<<25) #define DVS_FORMAT_RGBX101010 (1<<25) #define DVS_FORMAT_RGBX888 (2<<25) #define DVS_FORMAT_RGBX161616 (3<<25) #define DVS_PIPE_CSC_ENABLE (1<<24) #define DVS_SOURCE_KEY (1<<22) #define DVS_RGB_ORDER_XBGR (1<<20) #define DVS_YUV_BYTE_ORDER_MASK (3<<16) #define DVS_YUV_ORDER_YUYV (0<<16) #define DVS_YUV_ORDER_UYVY (1<<16) #define DVS_YUV_ORDER_YVYU (2<<16) #define DVS_YUV_ORDER_VYUY (3<<16) #define DVS_ROTATE_180 (1<<15) #define DVS_DEST_KEY (1<<2) #define DVS_TRICKLE_FEED_DISABLE (1<<14) #define DVS_TILED (1<<10) #define _DVSALINOFF 0x72184 #define _DVSASTRIDE 0x72188 #define _DVSAPOS 0x7218c #define _DVSASIZE 0x72190 #define _DVSAKEYVAL 0x72194 #define _DVSAKEYMSK 0x72198 #define _DVSASURF 0x7219c #define _DVSAKEYMAXVAL 0x721a0 #define _DVSATILEOFF 0x721a4 #define _DVSASURFLIVE 0x721ac #define _DVSASCALE 0x72204 #define DVS_SCALE_ENABLE (1<<31) #define DVS_FILTER_MASK (3<<29) #define DVS_FILTER_MEDIUM (0<<29) #define DVS_FILTER_ENHANCING (1<<29) #define DVS_FILTER_SOFTENING (2<<29) #define DVS_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ #define DVS_VERTICAL_OFFSET_ENABLE (1<<27) #define _DVSAGAMC 0x72300 #define _DVSBCNTR 0x73180 #define _DVSBLINOFF 0x73184 #define _DVSBSTRIDE 0x73188 #define _DVSBPOS 0x7318c #define _DVSBSIZE 0x73190 #define _DVSBKEYVAL 0x73194 #define _DVSBKEYMSK 0x73198 #define _DVSBSURF 0x7319c #define _DVSBKEYMAXVAL 0x731a0 #define _DVSBTILEOFF 0x731a4 #define _DVSBSURFLIVE 0x731ac #define _DVSBSCALE 0x73204 #define _DVSBGAMC 0x73300 #define DVSCNTR(pipe) _PIPE(pipe, _DVSACNTR, _DVSBCNTR) #define DVSLINOFF(pipe) _PIPE(pipe, _DVSALINOFF, _DVSBLINOFF) #define DVSSTRIDE(pipe) _PIPE(pipe, _DVSASTRIDE, _DVSBSTRIDE) #define DVSPOS(pipe) _PIPE(pipe, _DVSAPOS, _DVSBPOS) #define DVSSURF(pipe) _PIPE(pipe, _DVSASURF, _DVSBSURF) #define DVSKEYMAX(pipe) _PIPE(pipe, _DVSAKEYMAXVAL, _DVSBKEYMAXVAL) #define DVSSIZE(pipe) _PIPE(pipe, _DVSASIZE, _DVSBSIZE) #define DVSSCALE(pipe) _PIPE(pipe, _DVSASCALE, _DVSBSCALE) #define DVSTILEOFF(pipe) _PIPE(pipe, _DVSATILEOFF, _DVSBTILEOFF) #define DVSKEYVAL(pipe) _PIPE(pipe, _DVSAKEYVAL, _DVSBKEYVAL) #define DVSKEYMSK(pipe) _PIPE(pipe, _DVSAKEYMSK, _DVSBKEYMSK) #define DVSSURFLIVE(pipe) _PIPE(pipe, _DVSASURFLIVE, _DVSBSURFLIVE) #define _SPRA_CTL 0x70280 #define SPRITE_ENABLE (1<<31) #define SPRITE_GAMMA_ENABLE (1<<30) #define SPRITE_PIXFORMAT_MASK (7<<25) #define SPRITE_FORMAT_YUV422 (0<<25) #define SPRITE_FORMAT_RGBX101010 (1<<25) #define SPRITE_FORMAT_RGBX888 (2<<25) #define SPRITE_FORMAT_RGBX161616 (3<<25) #define SPRITE_FORMAT_YUV444 (4<<25) #define SPRITE_FORMAT_XR_BGR101010 (5<<25) /* Extended range */ #define SPRITE_PIPE_CSC_ENABLE (1<<24) #define SPRITE_SOURCE_KEY (1<<22) #define SPRITE_RGB_ORDER_RGBX (1<<20) /* only for 888 and 161616 */ #define SPRITE_YUV_TO_RGB_CSC_DISABLE (1<<19) #define SPRITE_YUV_CSC_FORMAT_BT709 (1<<18) /* 0 is BT601 */ #define SPRITE_YUV_BYTE_ORDER_MASK (3<<16) #define SPRITE_YUV_ORDER_YUYV (0<<16) #define SPRITE_YUV_ORDER_UYVY (1<<16) #define SPRITE_YUV_ORDER_YVYU (2<<16) #define SPRITE_YUV_ORDER_VYUY (3<<16) #define SPRITE_ROTATE_180 (1<<15) #define SPRITE_TRICKLE_FEED_DISABLE (1<<14) #define SPRITE_INT_GAMMA_ENABLE (1<<13) #define SPRITE_TILED (1<<10) #define SPRITE_DEST_KEY (1<<2) #define _SPRA_LINOFF 0x70284 #define _SPRA_STRIDE 0x70288 #define _SPRA_POS 0x7028c #define _SPRA_SIZE 0x70290 #define _SPRA_KEYVAL 0x70294 #define _SPRA_KEYMSK 0x70298 #define _SPRA_SURF 0x7029c #define _SPRA_KEYMAX 0x702a0 #define _SPRA_TILEOFF 0x702a4 #define _SPRA_OFFSET 0x702a4 #define _SPRA_SURFLIVE 0x702ac #define _SPRA_SCALE 0x70304 #define SPRITE_SCALE_ENABLE (1<<31) #define SPRITE_FILTER_MASK (3<<29) #define SPRITE_FILTER_MEDIUM (0<<29) #define SPRITE_FILTER_ENHANCING (1<<29) #define SPRITE_FILTER_SOFTENING (2<<29) #define SPRITE_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ #define SPRITE_VERTICAL_OFFSET_ENABLE (1<<27) #define _SPRA_GAMC 0x70400 #define _SPRB_CTL 0x71280 #define _SPRB_LINOFF 0x71284 #define _SPRB_STRIDE 0x71288 #define _SPRB_POS 0x7128c #define _SPRB_SIZE 0x71290 #define _SPRB_KEYVAL 0x71294 #define _SPRB_KEYMSK 0x71298 #define _SPRB_SURF 0x7129c #define _SPRB_KEYMAX 0x712a0 #define _SPRB_TILEOFF 0x712a4 #define _SPRB_OFFSET 0x712a4 #define _SPRB_SURFLIVE 0x712ac #define _SPRB_SCALE 0x71304 #define _SPRB_GAMC 0x71400 #define SPRCTL(pipe) _PIPE(pipe, _SPRA_CTL, _SPRB_CTL) #define SPRLINOFF(pipe) _PIPE(pipe, _SPRA_LINOFF, _SPRB_LINOFF) #define SPRSTRIDE(pipe) _PIPE(pipe, _SPRA_STRIDE, _SPRB_STRIDE) #define SPRPOS(pipe) _PIPE(pipe, _SPRA_POS, _SPRB_POS) #define SPRSIZE(pipe) _PIPE(pipe, _SPRA_SIZE, _SPRB_SIZE) #define SPRKEYVAL(pipe) _PIPE(pipe, _SPRA_KEYVAL, _SPRB_KEYVAL) #define SPRKEYMSK(pipe) _PIPE(pipe, _SPRA_KEYMSK, _SPRB_KEYMSK) #define SPRSURF(pipe) _PIPE(pipe, _SPRA_SURF, _SPRB_SURF) #define SPRKEYMAX(pipe) _PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX) #define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF) #define SPROFFSET(pipe) _PIPE(pipe, _SPRA_OFFSET, _SPRB_OFFSET) #define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE) #define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC) #define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE) #define _SPACNTR (VLV_DISPLAY_BASE + 0x72180) #define SP_ENABLE (1<<31) #define SP_GAMMA_ENABLE (1<<30) #define SP_PIXFORMAT_MASK (0xf<<26) #define SP_FORMAT_YUV422 (0<<26) #define SP_FORMAT_BGR565 (5<<26) #define SP_FORMAT_BGRX8888 (6<<26) #define SP_FORMAT_BGRA8888 (7<<26) #define SP_FORMAT_RGBX1010102 (8<<26) #define SP_FORMAT_RGBA1010102 (9<<26) #define SP_FORMAT_RGBX8888 (0xe<<26) #define SP_FORMAT_RGBA8888 (0xf<<26) #define SP_SOURCE_KEY (1<<22) #define SP_YUV_BYTE_ORDER_MASK (3<<16) #define SP_YUV_ORDER_YUYV (0<<16) #define SP_YUV_ORDER_UYVY (1<<16) #define SP_YUV_ORDER_YVYU (2<<16) #define SP_YUV_ORDER_VYUY (3<<16) #define SP_ROTATE_180 (1<<15) #define SP_TILED (1<<10) #define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184) #define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188) #define _SPAPOS (VLV_DISPLAY_BASE + 0x7218c) #define _SPASIZE (VLV_DISPLAY_BASE + 0x72190) #define _SPAKEYMINVAL (VLV_DISPLAY_BASE + 0x72194) #define _SPAKEYMSK (VLV_DISPLAY_BASE + 0x72198) #define _SPASURF (VLV_DISPLAY_BASE + 0x7219c) #define _SPAKEYMAXVAL (VLV_DISPLAY_BASE + 0x721a0) #define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4) #define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8) #define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4) #define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280) #define _SPBLINOFF (VLV_DISPLAY_BASE + 0x72284) #define _SPBSTRIDE (VLV_DISPLAY_BASE + 0x72288) #define _SPBPOS (VLV_DISPLAY_BASE + 0x7228c) #define _SPBSIZE (VLV_DISPLAY_BASE + 0x72290) #define _SPBKEYMINVAL (VLV_DISPLAY_BASE + 0x72294) #define _SPBKEYMSK (VLV_DISPLAY_BASE + 0x72298) #define _SPBSURF (VLV_DISPLAY_BASE + 0x7229c) #define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0) #define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4) #define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8) #define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4) #define SPCNTR(pipe, plane) _PIPE(pipe * 2 + plane, _SPACNTR, _SPBCNTR) #define SPLINOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPALINOFF, _SPBLINOFF) #define SPSTRIDE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASTRIDE, _SPBSTRIDE) #define SPPOS(pipe, plane) _PIPE(pipe * 2 + plane, _SPAPOS, _SPBPOS) #define SPSIZE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASIZE, _SPBSIZE) #define SPKEYMINVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMINVAL, _SPBKEYMINVAL) #define SPKEYMSK(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMSK, _SPBKEYMSK) #define SPSURF(pipe, plane) _PIPE(pipe * 2 + plane, _SPASURF, _SPBSURF) #define SPKEYMAXVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMAXVAL, _SPBKEYMAXVAL) #define SPTILEOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPATILEOFF, _SPBTILEOFF) #define SPCONSTALPHA(pipe, plane) _PIPE(pipe * 2 + plane, _SPACONSTALPHA, _SPBCONSTALPHA) #define SPGAMC(pipe, plane) _PIPE(pipe * 2 + plane, _SPAGAMC, _SPBGAMC) /* VBIOS regs */ #define VGACNTRL 0x71400 # define VGA_DISP_DISABLE (1 << 31) # define VGA_2X_MODE (1 << 30) # define VGA_PIPE_B_SELECT (1 << 29) #define VLV_VGACNTRL (VLV_DISPLAY_BASE + 0x71400) /* Ironlake */ #define CPU_VGACNTRL 0x41000 #define DIGITAL_PORT_HOTPLUG_CNTRL 0x44030 #define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4) #define DIGITAL_PORTA_SHORT_PULSE_2MS (0 << 2) #define DIGITAL_PORTA_SHORT_PULSE_4_5MS (1 << 2) #define DIGITAL_PORTA_SHORT_PULSE_6MS (2 << 2) #define DIGITAL_PORTA_SHORT_PULSE_100MS (3 << 2) #define DIGITAL_PORTA_NO_DETECT (0 << 0) #define DIGITAL_PORTA_LONG_PULSE_DETECT_MASK (1 << 1) #define DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK (1 << 0) /* refresh rate hardware control */ #define RR_HW_CTL 0x45300 #define RR_HW_LOW_POWER_FRAMES_MASK 0xff #define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 #define FDI_PLL_BIOS_0 0x46000 #define FDI_PLL_FB_CLOCK_MASK 0xff #define FDI_PLL_BIOS_1 0x46004 #define FDI_PLL_BIOS_2 0x46008 #define DISPLAY_PORT_PLL_BIOS_0 0x4600c #define DISPLAY_PORT_PLL_BIOS_1 0x46010 #define DISPLAY_PORT_PLL_BIOS_2 0x46014 #define PCH_3DCGDIS0 0x46020 # define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18) # define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1) #define PCH_3DCGDIS1 0x46024 # define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11) #define FDI_PLL_FREQ_CTL 0x46030 #define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) #define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 #define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff #define _PIPEA_DATA_M1 0x60030 #define PIPE_DATA_M1_OFFSET 0 #define _PIPEA_DATA_N1 0x60034 #define PIPE_DATA_N1_OFFSET 0 #define _PIPEA_DATA_M2 0x60038 #define PIPE_DATA_M2_OFFSET 0 #define _PIPEA_DATA_N2 0x6003c #define PIPE_DATA_N2_OFFSET 0 #define _PIPEA_LINK_M1 0x60040 #define PIPE_LINK_M1_OFFSET 0 #define _PIPEA_LINK_N1 0x60044 #define PIPE_LINK_N1_OFFSET 0 #define _PIPEA_LINK_M2 0x60048 #define PIPE_LINK_M2_OFFSET 0 #define _PIPEA_LINK_N2 0x6004c #define PIPE_LINK_N2_OFFSET 0 /* PIPEB timing regs are same start from 0x61000 */ #define _PIPEB_DATA_M1 0x61030 #define _PIPEB_DATA_N1 0x61034 #define _PIPEB_DATA_M2 0x61038 #define _PIPEB_DATA_N2 0x6103c #define _PIPEB_LINK_M1 0x61040 #define _PIPEB_LINK_N1 0x61044 #define _PIPEB_LINK_M2 0x61048 #define _PIPEB_LINK_N2 0x6104c #define PIPE_DATA_M1(tran) _TRANSCODER2(tran, _PIPEA_DATA_M1) #define PIPE_DATA_N1(tran) _TRANSCODER2(tran, _PIPEA_DATA_N1) #define PIPE_DATA_M2(tran) _TRANSCODER2(tran, _PIPEA_DATA_M2) #define PIPE_DATA_N2(tran) _TRANSCODER2(tran, _PIPEA_DATA_N2) #define PIPE_LINK_M1(tran) _TRANSCODER2(tran, _PIPEA_LINK_M1) #define PIPE_LINK_N1(tran) _TRANSCODER2(tran, _PIPEA_LINK_N1) #define PIPE_LINK_M2(tran) _TRANSCODER2(tran, _PIPEA_LINK_M2) #define PIPE_LINK_N2(tran) _TRANSCODER2(tran, _PIPEA_LINK_N2) /* CPU panel fitter */ /* IVB+ has 3 fitters, 0 is 7x5 capable, the other two only 3x3 */ #define _PFA_CTL_1 0x68080 #define _PFB_CTL_1 0x68880 #define PF_ENABLE (1<<31) #define PF_PIPE_SEL_MASK_IVB (3<<29) #define PF_PIPE_SEL_IVB(pipe) ((pipe)<<29) #define PF_FILTER_MASK (3<<23) #define PF_FILTER_PROGRAMMED (0<<23) #define PF_FILTER_MED_3x3 (1<<23) #define PF_FILTER_EDGE_ENHANCE (2<<23) #define PF_FILTER_EDGE_SOFTEN (3<<23) #define _PFA_WIN_SZ 0x68074 #define _PFB_WIN_SZ 0x68874 #define _PFA_WIN_POS 0x68070 #define _PFB_WIN_POS 0x68870 #define _PFA_VSCALE 0x68084 #define _PFB_VSCALE 0x68884 #define _PFA_HSCALE 0x68090 #define _PFB_HSCALE 0x68890 #define PF_CTL(pipe) _PIPE(pipe, _PFA_CTL_1, _PFB_CTL_1) #define PF_WIN_SZ(pipe) _PIPE(pipe, _PFA_WIN_SZ, _PFB_WIN_SZ) #define PF_WIN_POS(pipe) _PIPE(pipe, _PFA_WIN_POS, _PFB_WIN_POS) #define PF_VSCALE(pipe) _PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE) #define PF_HSCALE(pipe) _PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE) /* legacy palette */ #define _LGC_PALETTE_A 0x4a000 #define _LGC_PALETTE_B 0x4a800 #define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B) #define _GAMMA_MODE_A 0x4a480 #define _GAMMA_MODE_B 0x4ac80 #define GAMMA_MODE(pipe) _PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B) #define GAMMA_MODE_MODE_MASK (3 << 0) #define GAMMA_MODE_MODE_8BIT (0 << 0) #define GAMMA_MODE_MODE_10BIT (1 << 0) #define GAMMA_MODE_MODE_12BIT (2 << 0) #define GAMMA_MODE_MODE_SPLIT (3 << 0) /* interrupts */ #define DE_MASTER_IRQ_CONTROL (1 << 31) #define DE_SPRITEB_FLIP_DONE (1 << 29) #define DE_SPRITEA_FLIP_DONE (1 << 28) #define DE_PLANEB_FLIP_DONE (1 << 27) #define DE_PLANEA_FLIP_DONE (1 << 26) #define DE_PLANE_FLIP_DONE(plane) (1 << (26 + (plane))) #define DE_PCU_EVENT (1 << 25) #define DE_GTT_FAULT (1 << 24) #define DE_POISON (1 << 23) #define DE_PERFORM_COUNTER (1 << 22) #define DE_PCH_EVENT (1 << 21) #define DE_AUX_CHANNEL_A (1 << 20) #define DE_DP_A_HOTPLUG (1 << 19) #define DE_GSE (1 << 18) #define DE_PIPEB_VBLANK (1 << 15) #define DE_PIPEB_EVEN_FIELD (1 << 14) #define DE_PIPEB_ODD_FIELD (1 << 13) #define DE_PIPEB_LINE_COMPARE (1 << 12) #define DE_PIPEB_VSYNC (1 << 11) #define DE_PIPEB_CRC_DONE (1 << 10) #define DE_PIPEB_FIFO_UNDERRUN (1 << 8) #define DE_PIPEA_VBLANK (1 << 7) #define DE_PIPE_VBLANK(pipe) (1 << (7 + 8*(pipe))) #define DE_PIPEA_EVEN_FIELD (1 << 6) #define DE_PIPEA_ODD_FIELD (1 << 5) #define DE_PIPEA_LINE_COMPARE (1 << 4) #define DE_PIPEA_VSYNC (1 << 3) #define DE_PIPEA_CRC_DONE (1 << 2) #define DE_PIPE_CRC_DONE(pipe) (1 << (2 + 8*(pipe))) #define DE_PIPEA_FIFO_UNDERRUN (1 << 0) #define DE_PIPE_FIFO_UNDERRUN(pipe) (1 << (8*(pipe))) /* More Ivybridge lolz */ #define DE_ERR_INT_IVB (1<<30) #define DE_GSE_IVB (1<<29) #define DE_PCH_EVENT_IVB (1<<28) #define DE_DP_A_HOTPLUG_IVB (1<<27) #define DE_AUX_CHANNEL_A_IVB (1<<26) #define DE_SPRITEC_FLIP_DONE_IVB (1<<14) #define DE_PLANEC_FLIP_DONE_IVB (1<<13) #define DE_PIPEC_VBLANK_IVB (1<<10) #define DE_SPRITEB_FLIP_DONE_IVB (1<<9) #define DE_PLANEB_FLIP_DONE_IVB (1<<8) #define DE_PIPEB_VBLANK_IVB (1<<5) #define DE_SPRITEA_FLIP_DONE_IVB (1<<4) #define DE_PLANEA_FLIP_DONE_IVB (1<<3) #define DE_PLANE_FLIP_DONE_IVB(plane) (1<< (3 + 5*(plane))) #define DE_PIPEA_VBLANK_IVB (1<<0) #define DE_PIPE_VBLANK_IVB(pipe) (1 << (pipe * 5)) #define VLV_MASTER_IER 0x4400c /* Gunit master IER */ #define MASTER_INTERRUPT_ENABLE (1<<31) #define DEISR 0x44000 #define DEIMR 0x44004 #define DEIIR 0x44008 #define DEIER 0x4400c #define GTISR 0x44010 #define GTIMR 0x44014 #define GTIIR 0x44018 #define GTIER 0x4401c #define GEN8_MASTER_IRQ 0x44200 #define GEN8_MASTER_IRQ_CONTROL (1<<31) #define GEN8_PCU_IRQ (1<<30) #define GEN8_DE_PCH_IRQ (1<<23) #define GEN8_DE_MISC_IRQ (1<<22) #define GEN8_DE_PORT_IRQ (1<<20) #define GEN8_DE_PIPE_C_IRQ (1<<18) #define GEN8_DE_PIPE_B_IRQ (1<<17) #define GEN8_DE_PIPE_A_IRQ (1<<16) #define GEN8_DE_PIPE_IRQ(pipe) (1<<(16+pipe)) #define GEN8_GT_VECS_IRQ (1<<6) #define GEN8_GT_PM_IRQ (1<<4) #define GEN8_GT_VCS2_IRQ (1<<3) #define GEN8_GT_VCS1_IRQ (1<<2) #define GEN8_GT_BCS_IRQ (1<<1) #define GEN8_GT_RCS_IRQ (1<<0) #define GEN8_GT_ISR(which) (0x44300 + (0x10 * (which))) #define GEN8_GT_IMR(which) (0x44304 + (0x10 * (which))) #define GEN8_GT_IIR(which) (0x44308 + (0x10 * (which))) #define GEN8_GT_IER(which) (0x4430c + (0x10 * (which))) #define GEN8_BCS_IRQ_SHIFT 16 #define GEN8_RCS_IRQ_SHIFT 0 #define GEN8_VCS2_IRQ_SHIFT 16 #define GEN8_VCS1_IRQ_SHIFT 0 #define GEN8_VECS_IRQ_SHIFT 0 #define GEN8_DE_PIPE_ISR(pipe) (0x44400 + (0x10 * (pipe))) #define GEN8_DE_PIPE_IMR(pipe) (0x44404 + (0x10 * (pipe))) #define GEN8_DE_PIPE_IIR(pipe) (0x44408 + (0x10 * (pipe))) #define GEN8_DE_PIPE_IER(pipe) (0x4440c + (0x10 * (pipe))) #define GEN8_PIPE_FIFO_UNDERRUN (1 << 31) #define GEN8_PIPE_CDCLK_CRC_ERROR (1 << 29) #define GEN8_PIPE_CDCLK_CRC_DONE (1 << 28) #define GEN8_PIPE_CURSOR_FAULT (1 << 10) #define GEN8_PIPE_SPRITE_FAULT (1 << 9) #define GEN8_PIPE_PRIMARY_FAULT (1 << 8) #define GEN8_PIPE_SPRITE_FLIP_DONE (1 << 5) #define GEN8_PIPE_PRIMARY_FLIP_DONE (1 << 4) #define GEN8_PIPE_SCAN_LINE_EVENT (1 << 2) #define GEN8_PIPE_VSYNC (1 << 1) #define GEN8_PIPE_VBLANK (1 << 0) #define GEN8_DE_PIPE_IRQ_FAULT_ERRORS \ (GEN8_PIPE_CURSOR_FAULT | \ GEN8_PIPE_SPRITE_FAULT | \ GEN8_PIPE_PRIMARY_FAULT) #define GEN8_DE_PORT_ISR 0x44440 #define GEN8_DE_PORT_IMR 0x44444 #define GEN8_DE_PORT_IIR 0x44448 #define GEN8_DE_PORT_IER 0x4444c #define GEN8_PORT_DP_A_HOTPLUG (1 << 3) #define GEN8_AUX_CHANNEL_A (1 << 0) #define GEN8_DE_MISC_ISR 0x44460 #define GEN8_DE_MISC_IMR 0x44464 #define GEN8_DE_MISC_IIR 0x44468 #define GEN8_DE_MISC_IER 0x4446c #define GEN8_DE_MISC_GSE (1 << 27) #define GEN8_PCU_ISR 0x444e0 #define GEN8_PCU_IMR 0x444e4 #define GEN8_PCU_IIR 0x444e8 #define GEN8_PCU_IER 0x444ec #define ILK_DISPLAY_CHICKEN2 0x42004 /* Required on all Ironlake and Sandybridge according to the B-Spec. */ #define ILK_ELPIN_409_SELECT (1 << 25) #define ILK_DPARB_GATE (1<<22) #define ILK_VSDPFD_FULL (1<<21) #define FUSE_STRAP 0x42014 #define ILK_INTERNAL_GRAPHICS_DISABLE (1 << 31) #define ILK_INTERNAL_DISPLAY_DISABLE (1 << 30) #define ILK_DISPLAY_DEBUG_DISABLE (1 << 29) #define ILK_HDCP_DISABLE (1 << 25) #define ILK_eDP_A_DISABLE (1 << 24) #define HSW_CDCLK_LIMIT (1 << 24) #define ILK_DESKTOP (1 << 23) #define ILK_DSPCLK_GATE_D 0x42020 #define ILK_VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) #define ILK_DPFCUNIT_CLOCK_GATE_DISABLE (1 << 9) #define ILK_DPFCRUNIT_CLOCK_GATE_DISABLE (1 << 8) #define ILK_DPFDUNIT_CLOCK_GATE_ENABLE (1 << 7) #define ILK_DPARBUNIT_CLOCK_GATE_ENABLE (1 << 5) #define IVB_CHICKEN3 0x4200c # define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5) # define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2) #define CHICKEN_PAR1_1 0x42080 #define DPA_MASK_VBLANK_SRD (1 << 15) #define FORCE_ARB_IDLE_PLANES (1 << 14) #define _CHICKEN_PIPESL_1_A 0x420b0 #define _CHICKEN_PIPESL_1_B 0x420b4 #define HSW_FBCQ_DIS (1 << 22) #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0) #define CHICKEN_PIPESL_1(pipe) _PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) #define DISP_ARB_CTL 0x45000 #define DISP_TILE_SURFACE_SWIZZLING (1<<13) #define DISP_FBC_WM_DIS (1<<15) #define DISP_ARB_CTL2 0x45004 #define DISP_DATA_PARTITION_5_6 (1<<6) #define GEN7_MSG_CTL 0x45010 #define WAIT_FOR_PCH_RESET_ACK (1<<1) #define WAIT_FOR_PCH_FLR_ACK (1<<0) #define HSW_NDE_RSTWRN_OPT 0x46408 #define RESET_PCH_HANDSHAKE_ENABLE (1<<4) /* GEN7 chicken */ #define GEN7_COMMON_SLICE_CHICKEN1 0x7010 # define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) #define COMMON_SLICE_CHICKEN2 0x7014 # define GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE (1<<0) #define GEN7_L3SQCREG1 0xB010 #define VLV_B0_WA_L3SQCREG1_VALUE 0x00D30000 #define GEN7_L3CNTLREG1 0xB01C #define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C47FF8C #define GEN7_L3AGDIS (1<<19) #define GEN7_L3CNTLREG2 0xB020 #define GEN7_L3CNTLREG3 0xB024 #define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030 #define GEN7_WA_L3_CHICKEN_MODE 0x20000000 #define GEN7_L3SQCREG4 0xb034 #define L3SQ_URB_READ_CAM_MATCH_DISABLE (1<<27) /* GEN8 chicken */ #define HDC_CHICKEN0 0x7300 #define HDC_FORCE_NON_COHERENT (1<<4) /* WaCatErrorRejectionIssue */ #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) #define HSW_SCRATCH1 0xb038 #define HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE (1<<27) /* PCH */ /* south display engine interrupt: IBX */ #define SDE_AUDIO_POWER_D (1 << 27) #define SDE_AUDIO_POWER_C (1 << 26) #define SDE_AUDIO_POWER_B (1 << 25) #define SDE_AUDIO_POWER_SHIFT (25) #define SDE_AUDIO_POWER_MASK (7 << SDE_AUDIO_POWER_SHIFT) #define SDE_GMBUS (1 << 24) #define SDE_AUDIO_HDCP_TRANSB (1 << 23) #define SDE_AUDIO_HDCP_TRANSA (1 << 22) #define SDE_AUDIO_HDCP_MASK (3 << 22) #define SDE_AUDIO_TRANSB (1 << 21) #define SDE_AUDIO_TRANSA (1 << 20) #define SDE_AUDIO_TRANS_MASK (3 << 20) #define SDE_POISON (1 << 19) /* 18 reserved */ #define SDE_FDI_RXB (1 << 17) #define SDE_FDI_RXA (1 << 16) #define SDE_FDI_MASK (3 << 16) #define SDE_AUXD (1 << 15) #define SDE_AUXC (1 << 14) #define SDE_AUXB (1 << 13) #define SDE_AUX_MASK (7 << 13) /* 12 reserved */ #define SDE_CRT_HOTPLUG (1 << 11) #define SDE_PORTD_HOTPLUG (1 << 10) #define SDE_PORTC_HOTPLUG (1 << 9) #define SDE_PORTB_HOTPLUG (1 << 8) #define SDE_SDVOB_HOTPLUG (1 << 6) #define SDE_HOTPLUG_MASK (SDE_CRT_HOTPLUG | \ SDE_SDVOB_HOTPLUG | \ SDE_PORTB_HOTPLUG | \ SDE_PORTC_HOTPLUG | \ SDE_PORTD_HOTPLUG) #define SDE_TRANSB_CRC_DONE (1 << 5) #define SDE_TRANSB_CRC_ERR (1 << 4) #define SDE_TRANSB_FIFO_UNDER (1 << 3) #define SDE_TRANSA_CRC_DONE (1 << 2) #define SDE_TRANSA_CRC_ERR (1 << 1) #define SDE_TRANSA_FIFO_UNDER (1 << 0) #define SDE_TRANS_MASK (0x3f) /* south display engine interrupt: CPT/PPT */ #define SDE_AUDIO_POWER_D_CPT (1 << 31) #define SDE_AUDIO_POWER_C_CPT (1 << 30) #define SDE_AUDIO_POWER_B_CPT (1 << 29) #define SDE_AUDIO_POWER_SHIFT_CPT 29 #define SDE_AUDIO_POWER_MASK_CPT (7 << 29) #define SDE_AUXD_CPT (1 << 27) #define SDE_AUXC_CPT (1 << 26) #define SDE_AUXB_CPT (1 << 25) #define SDE_AUX_MASK_CPT (7 << 25) #define SDE_PORTD_HOTPLUG_CPT (1 << 23) #define SDE_PORTC_HOTPLUG_CPT (1 << 22) #define SDE_PORTB_HOTPLUG_CPT (1 << 21) #define SDE_CRT_HOTPLUG_CPT (1 << 19) #define SDE_SDVOB_HOTPLUG_CPT (1 << 18) #define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \ SDE_SDVOB_HOTPLUG_CPT | \ SDE_PORTD_HOTPLUG_CPT | \ SDE_PORTC_HOTPLUG_CPT | \ SDE_PORTB_HOTPLUG_CPT) #define SDE_GMBUS_CPT (1 << 17) #define SDE_ERROR_CPT (1 << 16) #define SDE_AUDIO_CP_REQ_C_CPT (1 << 10) #define SDE_AUDIO_CP_CHG_C_CPT (1 << 9) #define SDE_FDI_RXC_CPT (1 << 8) #define SDE_AUDIO_CP_REQ_B_CPT (1 << 6) #define SDE_AUDIO_CP_CHG_B_CPT (1 << 5) #define SDE_FDI_RXB_CPT (1 << 4) #define SDE_AUDIO_CP_REQ_A_CPT (1 << 2) #define SDE_AUDIO_CP_CHG_A_CPT (1 << 1) #define SDE_FDI_RXA_CPT (1 << 0) #define SDE_AUDIO_CP_REQ_CPT (SDE_AUDIO_CP_REQ_C_CPT | \ SDE_AUDIO_CP_REQ_B_CPT | \ SDE_AUDIO_CP_REQ_A_CPT) #define SDE_AUDIO_CP_CHG_CPT (SDE_AUDIO_CP_CHG_C_CPT | \ SDE_AUDIO_CP_CHG_B_CPT | \ SDE_AUDIO_CP_CHG_A_CPT) #define SDE_FDI_MASK_CPT (SDE_FDI_RXC_CPT | \ SDE_FDI_RXB_CPT | \ SDE_FDI_RXA_CPT) #define SDEISR 0xc4000 #define SDEIMR 0xc4004 #define SDEIIR 0xc4008 #define SDEIER 0xc400c #define SERR_INT 0xc4040 #define SERR_INT_POISON (1<<31) #define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6) #define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3) #define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0) #define SERR_INT_TRANS_FIFO_UNDERRUN(pipe) (1<<(pipe*3)) /* digital port hotplug */ #define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ #define PORTD_HOTPLUG_ENABLE (1 << 20) #define PORTD_PULSE_DURATION_2ms (0) #define PORTD_PULSE_DURATION_4_5ms (1 << 18) #define PORTD_PULSE_DURATION_6ms (2 << 18) #define PORTD_PULSE_DURATION_100ms (3 << 18) #define PORTD_PULSE_DURATION_MASK (3 << 18) #define PORTD_HOTPLUG_STATUS_MASK (0x3 << 16) #define PORTD_HOTPLUG_NO_DETECT (0 << 16) #define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) #define PORTD_HOTPLUG_LONG_DETECT (2 << 16) #define PORTC_HOTPLUG_ENABLE (1 << 12) #define PORTC_PULSE_DURATION_2ms (0) #define PORTC_PULSE_DURATION_4_5ms (1 << 10) #define PORTC_PULSE_DURATION_6ms (2 << 10) #define PORTC_PULSE_DURATION_100ms (3 << 10) #define PORTC_PULSE_DURATION_MASK (3 << 10) #define PORTC_HOTPLUG_STATUS_MASK (0x3 << 8) #define PORTC_HOTPLUG_NO_DETECT (0 << 8) #define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) #define PORTC_HOTPLUG_LONG_DETECT (2 << 8) #define PORTB_HOTPLUG_ENABLE (1 << 4) #define PORTB_PULSE_DURATION_2ms (0) #define PORTB_PULSE_DURATION_4_5ms (1 << 2) #define PORTB_PULSE_DURATION_6ms (2 << 2) #define PORTB_PULSE_DURATION_100ms (3 << 2) #define PORTB_PULSE_DURATION_MASK (3 << 2) #define PORTB_HOTPLUG_STATUS_MASK (0x3 << 0) #define PORTB_HOTPLUG_NO_DETECT (0 << 0) #define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) #define PORTB_HOTPLUG_LONG_DETECT (2 << 0) #define PCH_GPIOA 0xc5010 #define PCH_GPIOB 0xc5014 #define PCH_GPIOC 0xc5018 #define PCH_GPIOD 0xc501c #define PCH_GPIOE 0xc5020 #define PCH_GPIOF 0xc5024 #define PCH_GMBUS0 0xc5100 #define PCH_GMBUS1 0xc5104 #define PCH_GMBUS2 0xc5108 #define PCH_GMBUS3 0xc510c #define PCH_GMBUS4 0xc5110 #define PCH_GMBUS5 0xc5120 #define _PCH_DPLL_A 0xc6014 #define _PCH_DPLL_B 0xc6018 #define PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) #define _PCH_FPA0 0xc6040 #define FP_CB_TUNE (0x3<<22) #define _PCH_FPA1 0xc6044 #define _PCH_FPB0 0xc6048 #define _PCH_FPB1 0xc604c #define PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) #define PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) #define PCH_DPLL_TEST 0xc606c #define PCH_DREF_CONTROL 0xC6200 #define DREF_CONTROL_MASK 0x7fc3 #define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) #define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) #define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) #define DREF_SSC_SOURCE_DISABLE (0<<11) #define DREF_SSC_SOURCE_ENABLE (2<<11) #define DREF_SSC_SOURCE_MASK (3<<11) #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) #define DREF_NONSPREAD_CK505_ENABLE (1<<9) #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) #define DREF_NONSPREAD_SOURCE_MASK (3<<9) #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) #define DREF_SUPERSPREAD_SOURCE_MASK (3<<7) #define DREF_SSC4_DOWNSPREAD (0<<6) #define DREF_SSC4_CENTERSPREAD (1<<6) #define DREF_SSC1_DISABLE (0<<1) #define DREF_SSC1_ENABLE (1<<1) #define DREF_SSC4_DISABLE (0) #define DREF_SSC4_ENABLE (1) #define PCH_RAWCLK_FREQ 0xc6204 #define FDL_TP1_TIMER_SHIFT 12 #define FDL_TP1_TIMER_MASK (3<<12) #define FDL_TP2_TIMER_SHIFT 10 #define FDL_TP2_TIMER_MASK (3<<10) #define RAWCLK_FREQ_MASK 0x3ff #define PCH_DPLL_TMR_CFG 0xc6208 #define PCH_SSC4_PARMS 0xc6210 #define PCH_SSC4_AUX_PARMS 0xc6214 #define PCH_DPLL_SEL 0xc7000 #define TRANS_DPLLB_SEL(pipe) (1 << (pipe * 4)) #define TRANS_DPLLA_SEL(pipe) 0 #define TRANS_DPLL_ENABLE(pipe) (1 << (pipe * 4 + 3)) /* transcoder */ #define _PCH_TRANS_HTOTAL_A 0xe0000 #define TRANS_HTOTAL_SHIFT 16 #define TRANS_HACTIVE_SHIFT 0 #define _PCH_TRANS_HBLANK_A 0xe0004 #define TRANS_HBLANK_END_SHIFT 16 #define TRANS_HBLANK_START_SHIFT 0 #define _PCH_TRANS_HSYNC_A 0xe0008 #define TRANS_HSYNC_END_SHIFT 16 #define TRANS_HSYNC_START_SHIFT 0 #define _PCH_TRANS_VTOTAL_A 0xe000c #define TRANS_VTOTAL_SHIFT 16 #define TRANS_VACTIVE_SHIFT 0 #define _PCH_TRANS_VBLANK_A 0xe0010 #define TRANS_VBLANK_END_SHIFT 16 #define TRANS_VBLANK_START_SHIFT 0 #define _PCH_TRANS_VSYNC_A 0xe0014 #define TRANS_VSYNC_END_SHIFT 16 #define TRANS_VSYNC_START_SHIFT 0 #define _PCH_TRANS_VSYNCSHIFT_A 0xe0028 #define _PCH_TRANSA_DATA_M1 0xe0030 #define _PCH_TRANSA_DATA_N1 0xe0034 #define _PCH_TRANSA_DATA_M2 0xe0038 #define _PCH_TRANSA_DATA_N2 0xe003c #define _PCH_TRANSA_LINK_M1 0xe0040 #define _PCH_TRANSA_LINK_N1 0xe0044 #define _PCH_TRANSA_LINK_M2 0xe0048 #define _PCH_TRANSA_LINK_N2 0xe004c /* Per-transcoder DIP controls (PCH) */ #define _VIDEO_DIP_CTL_A 0xe0200 #define _VIDEO_DIP_DATA_A 0xe0208 #define _VIDEO_DIP_GCP_A 0xe0210 #define _VIDEO_DIP_CTL_B 0xe1200 #define _VIDEO_DIP_DATA_B 0xe1208 #define _VIDEO_DIP_GCP_B 0xe1210 #define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B) #define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) #define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) /* Per-transcoder DIP controls (VLV) */ #define VLV_VIDEO_DIP_CTL_A (VLV_DISPLAY_BASE + 0x60200) #define VLV_VIDEO_DIP_DATA_A (VLV_DISPLAY_BASE + 0x60208) #define VLV_VIDEO_DIP_GDCP_PAYLOAD_A (VLV_DISPLAY_BASE + 0x60210) #define VLV_VIDEO_DIP_CTL_B (VLV_DISPLAY_BASE + 0x61170) #define VLV_VIDEO_DIP_DATA_B (VLV_DISPLAY_BASE + 0x61174) #define VLV_VIDEO_DIP_GDCP_PAYLOAD_B (VLV_DISPLAY_BASE + 0x61178) #define CHV_VIDEO_DIP_CTL_C (VLV_DISPLAY_BASE + 0x611f0) #define CHV_VIDEO_DIP_DATA_C (VLV_DISPLAY_BASE + 0x611f4) #define CHV_VIDEO_DIP_GDCP_PAYLOAD_C (VLV_DISPLAY_BASE + 0x611f8) #define VLV_TVIDEO_DIP_CTL(pipe) \ _PIPE3((pipe), VLV_VIDEO_DIP_CTL_A, \ VLV_VIDEO_DIP_CTL_B, CHV_VIDEO_DIP_CTL_C) #define VLV_TVIDEO_DIP_DATA(pipe) \ _PIPE3((pipe), VLV_VIDEO_DIP_DATA_A, \ VLV_VIDEO_DIP_DATA_B, CHV_VIDEO_DIP_DATA_C) #define VLV_TVIDEO_DIP_GCP(pipe) \ _PIPE3((pipe), VLV_VIDEO_DIP_GDCP_PAYLOAD_A, \ VLV_VIDEO_DIP_GDCP_PAYLOAD_B, CHV_VIDEO_DIP_GDCP_PAYLOAD_C) /* Haswell DIP controls */ #define HSW_VIDEO_DIP_CTL_A 0x60200 #define HSW_VIDEO_DIP_AVI_DATA_A 0x60220 #define HSW_VIDEO_DIP_VS_DATA_A 0x60260 #define HSW_VIDEO_DIP_SPD_DATA_A 0x602A0 #define HSW_VIDEO_DIP_GMP_DATA_A 0x602E0 #define HSW_VIDEO_DIP_VSC_DATA_A 0x60320 #define HSW_VIDEO_DIP_AVI_ECC_A 0x60240 #define HSW_VIDEO_DIP_VS_ECC_A 0x60280 #define HSW_VIDEO_DIP_SPD_ECC_A 0x602C0 #define HSW_VIDEO_DIP_GMP_ECC_A 0x60300 #define HSW_VIDEO_DIP_VSC_ECC_A 0x60344 #define HSW_VIDEO_DIP_GCP_A 0x60210 #define HSW_VIDEO_DIP_CTL_B 0x61200 #define HSW_VIDEO_DIP_AVI_DATA_B 0x61220 #define HSW_VIDEO_DIP_VS_DATA_B 0x61260 #define HSW_VIDEO_DIP_SPD_DATA_B 0x612A0 #define HSW_VIDEO_DIP_GMP_DATA_B 0x612E0 #define HSW_VIDEO_DIP_VSC_DATA_B 0x61320 #define HSW_VIDEO_DIP_BVI_ECC_B 0x61240 #define HSW_VIDEO_DIP_VS_ECC_B 0x61280 #define HSW_VIDEO_DIP_SPD_ECC_B 0x612C0 #define HSW_VIDEO_DIP_GMP_ECC_B 0x61300 #define HSW_VIDEO_DIP_VSC_ECC_B 0x61344 #define HSW_VIDEO_DIP_GCP_B 0x61210 #define HSW_TVIDEO_DIP_CTL(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_CTL_A) #define HSW_TVIDEO_DIP_AVI_DATA(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_AVI_DATA_A) #define HSW_TVIDEO_DIP_VS_DATA(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_VS_DATA_A) #define HSW_TVIDEO_DIP_SPD_DATA(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_SPD_DATA_A) #define HSW_TVIDEO_DIP_GCP(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_GCP_A) #define HSW_TVIDEO_DIP_VSC_DATA(trans) \ _TRANSCODER2(trans, HSW_VIDEO_DIP_VSC_DATA_A) #define HSW_STEREO_3D_CTL_A 0x70020 #define S3D_ENABLE (1<<31) #define HSW_STEREO_3D_CTL_B 0x71020 #define HSW_STEREO_3D_CTL(trans) \ _PIPE2(trans, HSW_STEREO_3D_CTL_A) #define _PCH_TRANS_HTOTAL_B 0xe1000 #define _PCH_TRANS_HBLANK_B 0xe1004 #define _PCH_TRANS_HSYNC_B 0xe1008 #define _PCH_TRANS_VTOTAL_B 0xe100c #define _PCH_TRANS_VBLANK_B 0xe1010 #define _PCH_TRANS_VSYNC_B 0xe1014 #define _PCH_TRANS_VSYNCSHIFT_B 0xe1028 #define PCH_TRANS_HTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B) #define PCH_TRANS_HBLANK(pipe) _PIPE(pipe, _PCH_TRANS_HBLANK_A, _PCH_TRANS_HBLANK_B) #define PCH_TRANS_HSYNC(pipe) _PIPE(pipe, _PCH_TRANS_HSYNC_A, _PCH_TRANS_HSYNC_B) #define PCH_TRANS_VTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_VTOTAL_A, _PCH_TRANS_VTOTAL_B) #define PCH_TRANS_VBLANK(pipe) _PIPE(pipe, _PCH_TRANS_VBLANK_A, _PCH_TRANS_VBLANK_B) #define PCH_TRANS_VSYNC(pipe) _PIPE(pipe, _PCH_TRANS_VSYNC_A, _PCH_TRANS_VSYNC_B) #define PCH_TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _PCH_TRANS_VSYNCSHIFT_A, \ _PCH_TRANS_VSYNCSHIFT_B) #define _PCH_TRANSB_DATA_M1 0xe1030 #define _PCH_TRANSB_DATA_N1 0xe1034 #define _PCH_TRANSB_DATA_M2 0xe1038 #define _PCH_TRANSB_DATA_N2 0xe103c #define _PCH_TRANSB_LINK_M1 0xe1040 #define _PCH_TRANSB_LINK_N1 0xe1044 #define _PCH_TRANSB_LINK_M2 0xe1048 #define _PCH_TRANSB_LINK_N2 0xe104c #define PCH_TRANS_DATA_M1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M1, _PCH_TRANSB_DATA_M1) #define PCH_TRANS_DATA_N1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N1, _PCH_TRANSB_DATA_N1) #define PCH_TRANS_DATA_M2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M2, _PCH_TRANSB_DATA_M2) #define PCH_TRANS_DATA_N2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N2, _PCH_TRANSB_DATA_N2) #define PCH_TRANS_LINK_M1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M1, _PCH_TRANSB_LINK_M1) #define PCH_TRANS_LINK_N1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N1, _PCH_TRANSB_LINK_N1) #define PCH_TRANS_LINK_M2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M2, _PCH_TRANSB_LINK_M2) #define PCH_TRANS_LINK_N2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N2, _PCH_TRANSB_LINK_N2) #define _PCH_TRANSACONF 0xf0008 #define _PCH_TRANSBCONF 0xf1008 #define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF) #define LPT_TRANSCONF _PCH_TRANSACONF /* lpt has only one transcoder */ #define TRANS_DISABLE (0<<31) #define TRANS_ENABLE (1<<31) #define TRANS_STATE_MASK (1<<30) #define TRANS_STATE_DISABLE (0<<30) #define TRANS_STATE_ENABLE (1<<30) #define TRANS_FSYNC_DELAY_HB1 (0<<27) #define TRANS_FSYNC_DELAY_HB2 (1<<27) #define TRANS_FSYNC_DELAY_HB3 (2<<27) #define TRANS_FSYNC_DELAY_HB4 (3<<27) #define TRANS_INTERLACE_MASK (7<<21) #define TRANS_PROGRESSIVE (0<<21) #define TRANS_INTERLACED (3<<21) #define TRANS_LEGACY_INTERLACED_ILK (2<<21) #define TRANS_8BPC (0<<5) #define TRANS_10BPC (1<<5) #define TRANS_6BPC (2<<5) #define TRANS_12BPC (3<<5) #define _TRANSA_CHICKEN1 0xf0060 #define _TRANSB_CHICKEN1 0xf1060 #define TRANS_CHICKEN1(pipe) _PIPE(pipe, _TRANSA_CHICKEN1, _TRANSB_CHICKEN1) #define TRANS_CHICKEN1_DP0UNIT_GC_DISABLE (1<<4) #define _TRANSA_CHICKEN2 0xf0064 #define _TRANSB_CHICKEN2 0xf1064 #define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2) #define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31) #define TRANS_CHICKEN2_FDI_POLARITY_REVERSED (1<<29) #define TRANS_CHICKEN2_FRAME_START_DELAY_MASK (3<<27) #define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER (1<<26) #define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH (1<<25) #define SOUTH_CHICKEN1 0xc2000 #define FDIA_PHASE_SYNC_SHIFT_OVR 19 #define FDIA_PHASE_SYNC_SHIFT_EN 18 #define FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2))) #define FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2))) #define FDI_BC_BIFURCATION_SELECT (1 << 12) #define SOUTH_CHICKEN2 0xc2004 #define FDI_MPHY_IOSFSB_RESET_STATUS (1<<13) #define FDI_MPHY_IOSFSB_RESET_CTL (1<<12) #define DPLS_EDP_PPS_FIX_DIS (1<<0) #define _FDI_RXA_CHICKEN 0xc200c #define _FDI_RXB_CHICKEN 0xc2010 #define FDI_RX_PHASE_SYNC_POINTER_OVR (1<<1) #define FDI_RX_PHASE_SYNC_POINTER_EN (1<<0) #define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN) #define SOUTH_DSPCLK_GATE_D 0xc2020 #define PCH_DPLUNIT_CLOCK_GATE_DISABLE (1<<30) #define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29) #define PCH_CPUNIT_CLOCK_GATE_DISABLE (1<<14) #define PCH_LP_PARTITION_LEVEL_DISABLE (1<<12) /* CPU: FDI_TX */ #define _FDI_TXA_CTL 0x60100 #define _FDI_TXB_CTL 0x61100 #define FDI_TX_CTL(pipe) _PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL) #define FDI_TX_DISABLE (0<<31) #define FDI_TX_ENABLE (1<<31) #define FDI_LINK_TRAIN_PATTERN_1 (0<<28) #define FDI_LINK_TRAIN_PATTERN_2 (1<<28) #define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28) #define FDI_LINK_TRAIN_NONE (3<<28) #define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25) #define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25) #define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25) #define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25) #define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22) #define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22) #define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22) #define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22) /* ILK always use 400mV 0dB for voltage swing and pre-emphasis level. SNB has different settings. */ /* SNB A-stepping */ #define FDI_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) #define FDI_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) #define FDI_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) /* SNB B-stepping */ #define FDI_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22) #define FDI_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22) #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22) #define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22) #define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22) #define FDI_DP_PORT_WIDTH_SHIFT 19 #define FDI_DP_PORT_WIDTH_MASK (7 << FDI_DP_PORT_WIDTH_SHIFT) #define FDI_DP_PORT_WIDTH(width) (((width) - 1) << FDI_DP_PORT_WIDTH_SHIFT) #define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) /* Ironlake: hardwired to 1 */ #define FDI_TX_PLL_ENABLE (1<<14) /* Ivybridge has different bits for lolz */ #define FDI_LINK_TRAIN_PATTERN_1_IVB (0<<8) #define FDI_LINK_TRAIN_PATTERN_2_IVB (1<<8) #define FDI_LINK_TRAIN_PATTERN_IDLE_IVB (2<<8) #define FDI_LINK_TRAIN_NONE_IVB (3<<8) /* both Tx and Rx */ #define FDI_COMPOSITE_SYNC (1<<11) #define FDI_LINK_TRAIN_AUTO (1<<10) #define FDI_SCRAMBLING_ENABLE (0<<7) #define FDI_SCRAMBLING_DISABLE (1<<7) /* FDI_RX, FDI_X is hard-wired to Transcoder_X */ #define _FDI_RXA_CTL 0xf000c #define _FDI_RXB_CTL 0xf100c #define FDI_RX_CTL(pipe) _PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL) #define FDI_RX_ENABLE (1<<31) /* train, dp width same as FDI_TX */ #define FDI_FS_ERRC_ENABLE (1<<27) #define FDI_FE_ERRC_ENABLE (1<<26) #define FDI_RX_POLARITY_REVERSED_LPT (1<<16) #define FDI_8BPC (0<<16) #define FDI_10BPC (1<<16) #define FDI_6BPC (2<<16) #define FDI_12BPC (3<<16) #define FDI_RX_LINK_REVERSAL_OVERRIDE (1<<15) #define FDI_DMI_LINK_REVERSE_MASK (1<<14) #define FDI_RX_PLL_ENABLE (1<<13) #define FDI_FS_ERR_CORRECT_ENABLE (1<<11) #define FDI_FE_ERR_CORRECT_ENABLE (1<<10) #define FDI_FS_ERR_REPORT_ENABLE (1<<9) #define FDI_FE_ERR_REPORT_ENABLE (1<<8) #define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) #define FDI_PCDCLK (1<<4) /* CPT */ #define FDI_AUTO_TRAINING (1<<10) #define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8) #define FDI_LINK_TRAIN_PATTERN_2_CPT (1<<8) #define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8) #define FDI_LINK_TRAIN_NORMAL_CPT (3<<8) #define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8) #define _FDI_RXA_MISC 0xf0010 #define _FDI_RXB_MISC 0xf1010 #define FDI_RX_PWRDN_LANE1_MASK (3<<26) #define FDI_RX_PWRDN_LANE1_VAL(x) ((x)<<26) #define FDI_RX_PWRDN_LANE0_MASK (3<<24) #define FDI_RX_PWRDN_LANE0_VAL(x) ((x)<<24) #define FDI_RX_TP1_TO_TP2_48 (2<<20) #define FDI_RX_TP1_TO_TP2_64 (3<<20) #define FDI_RX_FDI_DELAY_90 (0x90<<0) #define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC) #define _FDI_RXA_TUSIZE1 0xf0030 #define _FDI_RXA_TUSIZE2 0xf0038 #define _FDI_RXB_TUSIZE1 0xf1030 #define _FDI_RXB_TUSIZE2 0xf1038 #define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1) #define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2) /* FDI_RX interrupt register format */ #define FDI_RX_INTER_LANE_ALIGN (1<<10) #define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */ #define FDI_RX_BIT_LOCK (1<<8) /* train 1 */ #define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7) #define FDI_RX_FS_CODE_ERR (1<<6) #define FDI_RX_FE_CODE_ERR (1<<5) #define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4) #define FDI_RX_HDCP_LINK_FAIL (1<<3) #define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2) #define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1) #define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0) #define _FDI_RXA_IIR 0xf0014 #define _FDI_RXA_IMR 0xf0018 #define _FDI_RXB_IIR 0xf1014 #define _FDI_RXB_IMR 0xf1018 #define FDI_RX_IIR(pipe) _PIPE(pipe, _FDI_RXA_IIR, _FDI_RXB_IIR) #define FDI_RX_IMR(pipe) _PIPE(pipe, _FDI_RXA_IMR, _FDI_RXB_IMR) #define FDI_PLL_CTL_1 0xfe000 #define FDI_PLL_CTL_2 0xfe004 #define PCH_LVDS 0xe1180 #define LVDS_DETECTED (1 << 1) /* vlv has 2 sets of panel control regs. */ #define PIPEA_PP_STATUS (VLV_DISPLAY_BASE + 0x61200) #define PIPEA_PP_CONTROL (VLV_DISPLAY_BASE + 0x61204) #define PIPEA_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61208) #define PANEL_PORT_SELECT_DPB_VLV (1 << 30) #define PANEL_PORT_SELECT_DPC_VLV (2 << 30) #define PIPEA_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6120c) #define PIPEA_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61210) #define PIPEB_PP_STATUS (VLV_DISPLAY_BASE + 0x61300) #define PIPEB_PP_CONTROL (VLV_DISPLAY_BASE + 0x61304) #define PIPEB_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61308) #define PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c) #define PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310) #define VLV_PIPE_PP_STATUS(pipe) _PIPE(pipe, PIPEA_PP_STATUS, PIPEB_PP_STATUS) #define VLV_PIPE_PP_CONTROL(pipe) _PIPE(pipe, PIPEA_PP_CONTROL, PIPEB_PP_CONTROL) #define VLV_PIPE_PP_ON_DELAYS(pipe) \ _PIPE(pipe, PIPEA_PP_ON_DELAYS, PIPEB_PP_ON_DELAYS) #define VLV_PIPE_PP_OFF_DELAYS(pipe) \ _PIPE(pipe, PIPEA_PP_OFF_DELAYS, PIPEB_PP_OFF_DELAYS) #define VLV_PIPE_PP_DIVISOR(pipe) \ _PIPE(pipe, PIPEA_PP_DIVISOR, PIPEB_PP_DIVISOR) #define PCH_PP_STATUS 0xc7200 #define PCH_PP_CONTROL 0xc7204 #define PANEL_UNLOCK_REGS (0xabcd << 16) #define PANEL_UNLOCK_MASK (0xffff << 16) #define EDP_FORCE_VDD (1 << 3) #define EDP_BLC_ENABLE (1 << 2) #define PANEL_POWER_RESET (1 << 1) #define PANEL_POWER_OFF (0 << 0) #define PANEL_POWER_ON (1 << 0) #define PCH_PP_ON_DELAYS 0xc7208 #define PANEL_PORT_SELECT_MASK (3 << 30) #define PANEL_PORT_SELECT_LVDS (0 << 30) #define PANEL_PORT_SELECT_DPA (1 << 30) #define PANEL_PORT_SELECT_DPC (2 << 30) #define PANEL_PORT_SELECT_DPD (3 << 30) #define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) #define PANEL_POWER_UP_DELAY_SHIFT 16 #define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) #define PANEL_LIGHT_ON_DELAY_SHIFT 0 #define PCH_PP_OFF_DELAYS 0xc720c #define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) #define PANEL_POWER_DOWN_DELAY_SHIFT 16 #define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) #define PANEL_LIGHT_OFF_DELAY_SHIFT 0 #define PCH_PP_DIVISOR 0xc7210 #define PP_REFERENCE_DIVIDER_MASK (0xffffff00) #define PP_REFERENCE_DIVIDER_SHIFT 8 #define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) #define PANEL_POWER_CYCLE_DELAY_SHIFT 0 #define PCH_DP_B 0xe4100 #define PCH_DPB_AUX_CH_CTL 0xe4110 #define PCH_DPB_AUX_CH_DATA1 0xe4114 #define PCH_DPB_AUX_CH_DATA2 0xe4118 #define PCH_DPB_AUX_CH_DATA3 0xe411c #define PCH_DPB_AUX_CH_DATA4 0xe4120 #define PCH_DPB_AUX_CH_DATA5 0xe4124 #define PCH_DP_C 0xe4200 #define PCH_DPC_AUX_CH_CTL 0xe4210 #define PCH_DPC_AUX_CH_DATA1 0xe4214 #define PCH_DPC_AUX_CH_DATA2 0xe4218 #define PCH_DPC_AUX_CH_DATA3 0xe421c #define PCH_DPC_AUX_CH_DATA4 0xe4220 #define PCH_DPC_AUX_CH_DATA5 0xe4224 #define PCH_DP_D 0xe4300 #define PCH_DPD_AUX_CH_CTL 0xe4310 #define PCH_DPD_AUX_CH_DATA1 0xe4314 #define PCH_DPD_AUX_CH_DATA2 0xe4318 #define PCH_DPD_AUX_CH_DATA3 0xe431c #define PCH_DPD_AUX_CH_DATA4 0xe4320 #define PCH_DPD_AUX_CH_DATA5 0xe4324 /* CPT */ #define PORT_TRANS_A_SEL_CPT 0 #define PORT_TRANS_B_SEL_CPT (1<<29) #define PORT_TRANS_C_SEL_CPT (2<<29) #define PORT_TRANS_SEL_MASK (3<<29) #define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) #define PORT_TO_PIPE(val) (((val) & (1<<30)) >> 30) #define PORT_TO_PIPE_CPT(val) (((val) & PORT_TRANS_SEL_MASK) >> 29) #define SDVO_PORT_TO_PIPE_CHV(val) (((val) & (3<<24)) >> 24) #define DP_PORT_TO_PIPE_CHV(val) (((val) & (3<<16)) >> 16) #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 #define TRANS_DP_CTL_C 0xe2300 #define TRANS_DP_CTL(pipe) _PIPE(pipe, TRANS_DP_CTL_A, TRANS_DP_CTL_B) #define TRANS_DP_OUTPUT_ENABLE (1<<31) #define TRANS_DP_PORT_SEL_B (0<<29) #define TRANS_DP_PORT_SEL_C (1<<29) #define TRANS_DP_PORT_SEL_D (2<<29) #define TRANS_DP_PORT_SEL_NONE (3<<29) #define TRANS_DP_PORT_SEL_MASK (3<<29) #define TRANS_DP_AUDIO_ONLY (1<<26) #define TRANS_DP_ENH_FRAMING (1<<18) #define TRANS_DP_8BPC (0<<9) #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) #define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) #define TRANS_DP_HSYNC_ACTIVE_LOW 0 #define TRANS_DP_SYNC_MASK (3<<3) /* SNB eDP training params */ /* SNB A-stepping */ #define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) #define EDP_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) #define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) #define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) /* SNB B-stepping */ #define EDP_LINK_TRAIN_400_600MV_0DB_SNB_B (0x0<<22) #define EDP_LINK_TRAIN_400MV_3_5DB_SNB_B (0x1<<22) #define EDP_LINK_TRAIN_400_600MV_6DB_SNB_B (0x3a<<22) #define EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B (0x39<<22) #define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22) #define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22) /* IVB */ #define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22) #define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22) #define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22) #define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22) #define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22) #define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22) #define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x3e <<22) /* legacy values */ #define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22) #define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22) #define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22) #define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22) #define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22) #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) #define VLV_PMWGICZ 0x1300a4 #define FORCEWAKE 0xA18C #define FORCEWAKE_VLV 0x1300b0 #define FORCEWAKE_ACK_VLV 0x1300b4 #define FORCEWAKE_MEDIA_VLV 0x1300b8 #define FORCEWAKE_ACK_MEDIA_VLV 0x1300bc #define FORCEWAKE_ACK_HSW 0x130044 #define FORCEWAKE_ACK 0x130090 #define VLV_GTLC_WAKE_CTRL 0x130090 #define VLV_GTLC_RENDER_CTX_EXISTS (1 << 25) #define VLV_GTLC_MEDIA_CTX_EXISTS (1 << 24) #define VLV_GTLC_ALLOWWAKEREQ (1 << 0) #define VLV_GTLC_PW_STATUS 0x130094 #define VLV_GTLC_ALLOWWAKEACK (1 << 0) #define VLV_GTLC_ALLOWWAKEERR (1 << 1) #define VLV_GTLC_PW_MEDIA_STATUS_MASK (1 << 5) #define VLV_GTLC_PW_RENDER_STATUS_MASK (1 << 7) #define FORCEWAKE_MT 0xa188 /* multi-threaded */ #define FORCEWAKE_KERNEL 0x1 #define FORCEWAKE_USER 0x2 #define FORCEWAKE_MT_ACK 0x130040 #define ECOBUS 0xa180 #define FORCEWAKE_MT_ENABLE (1<<5) #define VLV_SPAREG2H 0xA194 #define GTFIFODBG 0x120000 #define GT_FIFO_SBDROPERR (1<<6) #define GT_FIFO_BLOBDROPERR (1<<5) #define GT_FIFO_SB_READ_ABORTERR (1<<4) #define GT_FIFO_DROPERR (1<<3) #define GT_FIFO_OVFERR (1<<2) #define GT_FIFO_IAWRERR (1<<1) #define GT_FIFO_IARDERR (1<<0) #define GTFIFOCTL 0x120008 #define GT_FIFO_FREE_ENTRIES_MASK 0x7f #define GT_FIFO_NUM_RESERVED_ENTRIES 20 #define HSW_IDICR 0x9008 #define IDIHASHMSK(x) (((x) & 0x3f) << 16) #define HSW_EDRAM_PRESENT 0x120010 #define GEN6_UCGCTL1 0x9400 # define GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE (1 << 16) # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) #define GEN6_UCGCTL2 0x9404 # define GEN7_VDSUNIT_CLOCK_GATE_DISABLE (1 << 30) # define GEN7_TDLUNIT_CLOCK_GATE_DISABLE (1 << 22) # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) #define GEN6_UCGCTL3 0x9408 #define GEN7_UCGCTL4 0x940c #define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) #define GEN6_RCGCTL1 0x9410 #define GEN6_RCGCTL2 0x9414 #define GEN6_RSTCTL 0x9420 #define GEN8_UCGCTL6 0x9430 #define GEN8_SDEUNIT_CLOCK_GATE_DISABLE (1<<14) #define GEN6_GFXPAUSE 0xA000 #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) #define HSW_FREQUENCY(x) ((x)<<24) #define GEN6_OFFSET(x) ((x)<<19) #define GEN6_AGGRESSIVE_TURBO (0<<15) #define GEN6_RC_VIDEO_FREQ 0xA00C #define GEN6_RC_CONTROL 0xA090 #define GEN6_RC_CTL_RC6pp_ENABLE (1<<16) #define GEN6_RC_CTL_RC6p_ENABLE (1<<17) #define GEN6_RC_CTL_RC6_ENABLE (1<<18) #define GEN6_RC_CTL_RC1e_ENABLE (1<<20) #define GEN6_RC_CTL_RC7_ENABLE (1<<22) #define VLV_RC_CTL_CTX_RST_PARALLEL (1<<24) #define GEN7_RC_CTL_TO_MODE (1<<28) #define GEN6_RC_CTL_EI_MODE(x) ((x)<<27) #define GEN6_RC_CTL_HW_ENABLE (1<<31) #define GEN6_RP_DOWN_TIMEOUT 0xA010 #define GEN6_RP_INTERRUPT_LIMITS 0xA014 #define GEN6_RPSTAT1 0xA01C #define GEN6_CAGF_SHIFT 8 #define HSW_CAGF_SHIFT 7 #define GEN6_CAGF_MASK (0x7f << GEN6_CAGF_SHIFT) #define HSW_CAGF_MASK (0x7f << HSW_CAGF_SHIFT) #define GEN6_RP_CONTROL 0xA024 #define GEN6_RP_MEDIA_TURBO (1<<11) #define GEN6_RP_MEDIA_MODE_MASK (3<<9) #define GEN6_RP_MEDIA_HW_TURBO_MODE (3<<9) #define GEN6_RP_MEDIA_HW_NORMAL_MODE (2<<9) #define GEN6_RP_MEDIA_HW_MODE (1<<9) #define GEN6_RP_MEDIA_SW_MODE (0<<9) #define GEN6_RP_MEDIA_IS_GFX (1<<8) #define GEN6_RP_ENABLE (1<<7) #define GEN6_RP_UP_IDLE_MIN (0x1<<3) #define GEN6_RP_UP_BUSY_AVG (0x2<<3) #define GEN6_RP_UP_BUSY_CONT (0x4<<3) #define GEN6_RP_DOWN_IDLE_AVG (0x2<<0) #define GEN6_RP_DOWN_IDLE_CONT (0x1<<0) #define GEN6_RP_UP_THRESHOLD 0xA02C #define GEN6_RP_DOWN_THRESHOLD 0xA030 #define GEN6_RP_CUR_UP_EI 0xA050 #define GEN6_CURICONT_MASK 0xffffff #define GEN6_RP_CUR_UP 0xA054 #define GEN6_CURBSYTAVG_MASK 0xffffff #define GEN6_RP_PREV_UP 0xA058 #define GEN6_RP_CUR_DOWN_EI 0xA05C #define GEN6_CURIAVG_MASK 0xffffff #define GEN6_RP_CUR_DOWN 0xA060 #define GEN6_RP_PREV_DOWN 0xA064 #define GEN6_RP_UP_EI 0xA068 #define GEN6_RP_DOWN_EI 0xA06C #define GEN6_RP_IDLE_HYSTERSIS 0xA070 #define GEN6_RPDEUHWTC 0xA080 #define GEN6_RPDEUC 0xA084 #define GEN6_RPDEUCSW 0xA088 #define GEN6_RC_STATE 0xA094 #define GEN6_RC1_WAKE_RATE_LIMIT 0xA098 #define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C #define GEN6_RC6pp_WAKE_RATE_LIMIT 0xA0A0 #define GEN6_RC_EVALUATION_INTERVAL 0xA0A8 #define GEN6_RC_IDLE_HYSTERSIS 0xA0AC #define GEN6_RC_SLEEP 0xA0B0 #define GEN6_RCUBMABDTMR 0xA0B0 #define GEN6_RC1e_THRESHOLD 0xA0B4 #define GEN6_RC6_THRESHOLD 0xA0B8 #define GEN6_RC6p_THRESHOLD 0xA0BC #define VLV_RCEDATA 0xA0BC #define GEN6_RC6pp_THRESHOLD 0xA0C0 #define GEN6_PMINTRMSK 0xA168 #define GEN8_PMINTR_REDIRECT_TO_NON_DISP (1<<31) #define VLV_PWRDWNUPCTL 0xA294 #define GEN6_PMISR 0x44020 #define GEN6_PMIMR 0x44024 /* rps_lock */ #define GEN6_PMIIR 0x44028 #define GEN6_PMIER 0x4402C #define GEN6_PM_MBOX_EVENT (1<<25) #define GEN6_PM_THERMAL_EVENT (1<<24) #define GEN6_PM_RP_DOWN_TIMEOUT (1<<6) #define GEN6_PM_RP_UP_THRESHOLD (1<<5) #define GEN6_PM_RP_DOWN_THRESHOLD (1<<4) #define GEN6_PM_RP_UP_EI_EXPIRED (1<<2) #define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1) #define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \ GEN6_PM_RP_DOWN_THRESHOLD | \ GEN6_PM_RP_DOWN_TIMEOUT) #define CHV_CZ_CLOCK_FREQ_MODE_200 200 #define CHV_CZ_CLOCK_FREQ_MODE_267 267 #define CHV_CZ_CLOCK_FREQ_MODE_320 320 #define CHV_CZ_CLOCK_FREQ_MODE_333 333 #define CHV_CZ_CLOCK_FREQ_MODE_400 400 #define GEN7_GT_SCRATCH_BASE 0x4F100 #define GEN7_GT_SCRATCH_REG_NUM 8 #define VLV_GTLC_SURVIVABILITY_REG 0x130098 #define VLV_GFX_CLK_STATUS_BIT (1<<3) #define VLV_GFX_CLK_FORCE_ON_BIT (1<<2) #define GEN6_GT_GFX_RC6_LOCKED 0x138104 #define VLV_COUNTER_CONTROL 0x138104 #define VLV_COUNT_RANGE_HIGH (1<<15) #define VLV_MEDIA_RC0_COUNT_EN (1<<5) #define VLV_RENDER_RC0_COUNT_EN (1<<4) #define VLV_MEDIA_RC6_COUNT_EN (1<<1) #define VLV_RENDER_RC6_COUNT_EN (1<<0) #define GEN6_GT_GFX_RC6 0x138108 #define VLV_GT_RENDER_RC6 0x138108 #define VLV_GT_MEDIA_RC6 0x13810C #define GEN6_GT_GFX_RC6p 0x13810C #define GEN6_GT_GFX_RC6pp 0x138110 #define VLV_RENDER_C0_COUNT_REG 0x138118 #define VLV_MEDIA_C0_COUNT_REG 0x13811C #define GEN6_PCODE_MAILBOX 0x138124 #define GEN6_PCODE_READY (1<<31) #define GEN6_READ_OC_PARAMS 0xc #define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8 #define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9 #define GEN6_PCODE_WRITE_RC6VIDS 0x4 #define GEN6_PCODE_READ_RC6VIDS 0x5 #define GEN6_PCODE_READ_D_COMP 0x10 #define GEN6_PCODE_WRITE_D_COMP 0x11 #define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5) #define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245) #define DISPLAY_IPS_CONTROL 0x19 #define GEN6_PCODE_DATA 0x138128 #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 #define GEN6_GT_CORE_STATUS 0x138060 #define GEN6_CORE_CPD_STATE_MASK (7<<4) #define GEN6_RCn_MASK 7 #define GEN6_RC0 0 #define GEN6_RC3 2 #define GEN6_RC6 3 #define GEN6_RC7 4 #define GEN7_MISCCPCTL (0x9424) #define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0) /* IVYBRIDGE DPF */ #define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */ #define HSW_L3CDERRST11 0xB208 /* L3CD Error Status register 1 slice 1 */ #define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14) #define GEN7_PARITY_ERROR_VALID (1<<13) #define GEN7_L3CDERRST1_BANK_MASK (3<<11) #define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8) #define GEN7_PARITY_ERROR_ROW(reg) \ ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14) #define GEN7_PARITY_ERROR_BANK(reg) \ ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11) #define GEN7_PARITY_ERROR_SUBBANK(reg) \ ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8) #define GEN7_L3CDERRST1_ENABLE (1<<7) #define GEN7_L3LOG_BASE 0xB070 #define HSW_L3LOG_BASE_SLICE1 0xB270 #define GEN7_L3LOG_SIZE 0x80 #define GEN7_HALF_SLICE_CHICKEN1 0xe100 /* IVB GT1 + VLV */ #define GEN7_HALF_SLICE_CHICKEN1_GT2 0xf100 #define GEN7_MAX_PS_THREAD_DEP (8<<12) #define GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE (1<<10) #define GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE (1<<3) #define GEN8_ROW_CHICKEN 0xe4f0 #define PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE (1<<8) #define STALL_DOP_GATING_DISABLE (1<<5) #define GEN7_ROW_CHICKEN2 0xe4f4 #define GEN7_ROW_CHICKEN2_GT2 0xf4f4 #define DOP_CLOCK_GATING_DISABLE (1<<0) #define HSW_ROW_CHICKEN3 0xe49c #define HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE (1 << 6) #define HALF_SLICE_CHICKEN3 0xe184 #define GEN8_CENTROID_PIXEL_OPT_DIS (1<<8) #define GEN8_SAMPLER_POWER_BYPASS_DIS (1<<1) #define G4X_AUD_VID_DID (dev_priv->info.display_mmio_offset + 0x62020) #define INTEL_AUDIO_DEVCL 0x808629FB #define INTEL_AUDIO_DEVBLC 0x80862801 #define INTEL_AUDIO_DEVCTG 0x80862802 #define G4X_AUD_CNTL_ST 0x620B4 #define G4X_ELDV_DEVCL_DEVBLC (1 << 13) #define G4X_ELDV_DEVCTG (1 << 14) #define G4X_ELD_ADDR (0xf << 5) #define G4X_ELD_ACK (1 << 4) #define G4X_HDMIW_HDMIEDID 0x6210C #define IBX_HDMIW_HDMIEDID_A 0xE2050 #define IBX_HDMIW_HDMIEDID_B 0xE2150 #define IBX_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \ IBX_HDMIW_HDMIEDID_A, \ IBX_HDMIW_HDMIEDID_B) #define IBX_AUD_CNTL_ST_A 0xE20B4 #define IBX_AUD_CNTL_ST_B 0xE21B4 #define IBX_AUD_CNTL_ST(pipe) _PIPE(pipe, \ IBX_AUD_CNTL_ST_A, \ IBX_AUD_CNTL_ST_B) #define IBX_ELD_BUFFER_SIZE (0x1f << 10) #define IBX_ELD_ADDRESS (0x1f << 5) #define IBX_ELD_ACK (1 << 4) #define IBX_AUD_CNTL_ST2 0xE20C0 #define IBX_ELD_VALIDB (1 << 0) #define IBX_CP_READYB (1 << 1) #define CPT_HDMIW_HDMIEDID_A 0xE5050 #define CPT_HDMIW_HDMIEDID_B 0xE5150 #define CPT_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \ CPT_HDMIW_HDMIEDID_A, \ CPT_HDMIW_HDMIEDID_B) #define CPT_AUD_CNTL_ST_A 0xE50B4 #define CPT_AUD_CNTL_ST_B 0xE51B4 #define CPT_AUD_CNTL_ST(pipe) _PIPE(pipe, \ CPT_AUD_CNTL_ST_A, \ CPT_AUD_CNTL_ST_B) #define CPT_AUD_CNTRL_ST2 0xE50C0 #define VLV_HDMIW_HDMIEDID_A (VLV_DISPLAY_BASE + 0x62050) #define VLV_HDMIW_HDMIEDID_B (VLV_DISPLAY_BASE + 0x62150) #define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \ VLV_HDMIW_HDMIEDID_A, \ VLV_HDMIW_HDMIEDID_B) #define VLV_AUD_CNTL_ST_A (VLV_DISPLAY_BASE + 0x620B4) #define VLV_AUD_CNTL_ST_B (VLV_DISPLAY_BASE + 0x621B4) #define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \ VLV_AUD_CNTL_ST_A, \ VLV_AUD_CNTL_ST_B) #define VLV_AUD_CNTL_ST2 (VLV_DISPLAY_BASE + 0x620C0) /* These are the 4 32-bit write offset registers for each stream * output buffer. It determines the offset from the * 3DSTATE_SO_BUFFERs that the next streamed vertex output goes to. */ #define GEN7_SO_WRITE_OFFSET(n) (0x5280 + (n) * 4) #define IBX_AUD_CONFIG_A 0xe2000 #define IBX_AUD_CONFIG_B 0xe2100 #define IBX_AUD_CFG(pipe) _PIPE(pipe, \ IBX_AUD_CONFIG_A, \ IBX_AUD_CONFIG_B) #define CPT_AUD_CONFIG_A 0xe5000 #define CPT_AUD_CONFIG_B 0xe5100 #define CPT_AUD_CFG(pipe) _PIPE(pipe, \ CPT_AUD_CONFIG_A, \ CPT_AUD_CONFIG_B) #define VLV_AUD_CONFIG_A (VLV_DISPLAY_BASE + 0x62000) #define VLV_AUD_CONFIG_B (VLV_DISPLAY_BASE + 0x62100) #define VLV_AUD_CFG(pipe) _PIPE(pipe, \ VLV_AUD_CONFIG_A, \ VLV_AUD_CONFIG_B) #define AUD_CONFIG_N_VALUE_INDEX (1 << 29) #define AUD_CONFIG_N_PROG_ENABLE (1 << 28) #define AUD_CONFIG_UPPER_N_SHIFT 20 #define AUD_CONFIG_UPPER_N_VALUE (0xff << 20) #define AUD_CONFIG_LOWER_N_SHIFT 4 #define AUD_CONFIG_LOWER_N_VALUE (0xfff << 4) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_SHIFT 16 #define AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK (0xf << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 (0 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 (1 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 (2 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 (3 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 (4 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 (5 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 (6 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 (7 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 (8 << 16) #define AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 (9 << 16) #define AUD_CONFIG_DISABLE_NCTS (1 << 3) /* HSW Audio */ #define HSW_AUD_CONFIG_A 0x65000 /* Audio Configuration Transcoder A */ #define HSW_AUD_CONFIG_B 0x65100 /* Audio Configuration Transcoder B */ #define HSW_AUD_CFG(pipe) _PIPE(pipe, \ HSW_AUD_CONFIG_A, \ HSW_AUD_CONFIG_B) #define HSW_AUD_MISC_CTRL_A 0x65010 /* Audio Misc Control Convert 1 */ #define HSW_AUD_MISC_CTRL_B 0x65110 /* Audio Misc Control Convert 2 */ #define HSW_AUD_MISC_CTRL(pipe) _PIPE(pipe, \ HSW_AUD_MISC_CTRL_A, \ HSW_AUD_MISC_CTRL_B) #define HSW_AUD_DIP_ELD_CTRL_ST_A 0x650b4 /* Audio DIP and ELD Control State Transcoder A */ #define HSW_AUD_DIP_ELD_CTRL_ST_B 0x651b4 /* Audio DIP and ELD Control State Transcoder B */ #define HSW_AUD_DIP_ELD_CTRL(pipe) _PIPE(pipe, \ HSW_AUD_DIP_ELD_CTRL_ST_A, \ HSW_AUD_DIP_ELD_CTRL_ST_B) /* Audio Digital Converter */ #define HSW_AUD_DIG_CNVT_1 0x65080 /* Audio Converter 1 */ #define HSW_AUD_DIG_CNVT_2 0x65180 /* Audio Converter 1 */ #define AUD_DIG_CNVT(pipe) _PIPE(pipe, \ HSW_AUD_DIG_CNVT_1, \ HSW_AUD_DIG_CNVT_2) #define DIP_PORT_SEL_MASK 0x3 #define HSW_AUD_EDID_DATA_A 0x65050 #define HSW_AUD_EDID_DATA_B 0x65150 #define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \ HSW_AUD_EDID_DATA_A, \ HSW_AUD_EDID_DATA_B) #define HSW_AUD_PIPE_CONV_CFG 0x6507c /* Audio pipe and converter configs */ #define HSW_AUD_PIN_ELD_CP_VLD 0x650c0 /* Audio ELD and CP Ready Status */ #define AUDIO_INACTIVE_C (1<<11) #define AUDIO_INACTIVE_B (1<<7) #define AUDIO_INACTIVE_A (1<<3) #define AUDIO_OUTPUT_ENABLE_A (1<<2) #define AUDIO_OUTPUT_ENABLE_B (1<<6) #define AUDIO_OUTPUT_ENABLE_C (1<<10) #define AUDIO_ELD_VALID_A (1<<0) #define AUDIO_ELD_VALID_B (1<<4) #define AUDIO_ELD_VALID_C (1<<8) #define AUDIO_CP_READY_A (1<<1) #define AUDIO_CP_READY_B (1<<5) #define AUDIO_CP_READY_C (1<<9) /* HSW Power Wells */ #define HSW_PWR_WELL_BIOS 0x45400 /* CTL1 */ #define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */ #define HSW_PWR_WELL_KVMR 0x45408 /* CTL3 */ #define HSW_PWR_WELL_DEBUG 0x4540C /* CTL4 */ #define HSW_PWR_WELL_ENABLE_REQUEST (1<<31) #define HSW_PWR_WELL_STATE_ENABLED (1<<30) #define HSW_PWR_WELL_CTL5 0x45410 #define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) #define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) #define HSW_PWR_WELL_FORCE_ON (1<<19) #define HSW_PWR_WELL_CTL6 0x45414 /* Per-pipe DDI Function Control */ #define TRANS_DDI_FUNC_CTL_A 0x60400 #define TRANS_DDI_FUNC_CTL_B 0x61400 #define TRANS_DDI_FUNC_CTL_C 0x62400 #define TRANS_DDI_FUNC_CTL_EDP 0x6F400 #define TRANS_DDI_FUNC_CTL(tran) _TRANSCODER2(tran, TRANS_DDI_FUNC_CTL_A) #define TRANS_DDI_FUNC_ENABLE (1<<31) /* Those bits are ignored by pipe EDP since it can only connect to DDI A */ #define TRANS_DDI_PORT_MASK (7<<28) #define TRANS_DDI_PORT_SHIFT 28 #define TRANS_DDI_SELECT_PORT(x) ((x)<<28) #define TRANS_DDI_PORT_NONE (0<<28) #define TRANS_DDI_MODE_SELECT_MASK (7<<24) #define TRANS_DDI_MODE_SELECT_HDMI (0<<24) #define TRANS_DDI_MODE_SELECT_DVI (1<<24) #define TRANS_DDI_MODE_SELECT_DP_SST (2<<24) #define TRANS_DDI_MODE_SELECT_DP_MST (3<<24) #define TRANS_DDI_MODE_SELECT_FDI (4<<24) #define TRANS_DDI_BPC_MASK (7<<20) #define TRANS_DDI_BPC_8 (0<<20) #define TRANS_DDI_BPC_10 (1<<20) #define TRANS_DDI_BPC_6 (2<<20) #define TRANS_DDI_BPC_12 (3<<20) #define TRANS_DDI_PVSYNC (1<<17) #define TRANS_DDI_PHSYNC (1<<16) #define TRANS_DDI_EDP_INPUT_MASK (7<<12) #define TRANS_DDI_EDP_INPUT_A_ON (0<<12) #define TRANS_DDI_EDP_INPUT_A_ONOFF (4<<12) #define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12) #define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12) #define TRANS_DDI_DP_VC_PAYLOAD_ALLOC (1<<8) #define TRANS_DDI_BFI_ENABLE (1<<4) /* DisplayPort Transport Control */ #define DP_TP_CTL_A 0x64040 #define DP_TP_CTL_B 0x64140 #define DP_TP_CTL(port) _PORT(port, DP_TP_CTL_A, DP_TP_CTL_B) #define DP_TP_CTL_ENABLE (1<<31) #define DP_TP_CTL_MODE_SST (0<<27) #define DP_TP_CTL_MODE_MST (1<<27) #define DP_TP_CTL_FORCE_ACT (1<<25) #define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18) #define DP_TP_CTL_FDI_AUTOTRAIN (1<<15) #define DP_TP_CTL_LINK_TRAIN_MASK (7<<8) #define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8) #define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8) #define DP_TP_CTL_LINK_TRAIN_PAT3 (4<<8) #define DP_TP_CTL_LINK_TRAIN_IDLE (2<<8) #define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8) #define DP_TP_CTL_SCRAMBLE_DISABLE (1<<7) /* DisplayPort Transport Status */ #define DP_TP_STATUS_A 0x64044 #define DP_TP_STATUS_B 0x64144 #define DP_TP_STATUS(port) _PORT(port, DP_TP_STATUS_A, DP_TP_STATUS_B) #define DP_TP_STATUS_IDLE_DONE (1<<25) #define DP_TP_STATUS_ACT_SENT (1<<24) #define DP_TP_STATUS_MODE_STATUS_MST (1<<23) #define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12) #define DP_TP_STATUS_PAYLOAD_MAPPING_VC2 (3 << 8) #define DP_TP_STATUS_PAYLOAD_MAPPING_VC1 (3 << 4) #define DP_TP_STATUS_PAYLOAD_MAPPING_VC0 (3 << 0) /* DDI Buffer Control */ #define DDI_BUF_CTL_A 0x64000 #define DDI_BUF_CTL_B 0x64100 #define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B) #define DDI_BUF_CTL_ENABLE (1<<31) #define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */ #define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */ #define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */ #define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */ #define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */ #define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */ #define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */ #define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */ #define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */ #define DDI_BUF_EMP_MASK (0xf<<24) #define DDI_BUF_PORT_REVERSAL (1<<16) #define DDI_BUF_IS_IDLE (1<<7) #define DDI_A_4_LANES (1<<4) #define DDI_PORT_WIDTH(width) (((width) - 1) << 1) #define DDI_INIT_DISPLAY_DETECTED (1<<0) /* DDI Buffer Translations */ #define DDI_BUF_TRANS_A 0x64E00 #define DDI_BUF_TRANS_B 0x64E60 #define DDI_BUF_TRANS(port) _PORT(port, DDI_BUF_TRANS_A, DDI_BUF_TRANS_B) /* Sideband Interface (SBI) is programmed indirectly, via * SBI_ADDR, which contains the register offset; and SBI_DATA, * which contains the payload */ #define SBI_ADDR 0xC6000 #define SBI_DATA 0xC6004 #define SBI_CTL_STAT 0xC6008 #define SBI_CTL_DEST_ICLK (0x0<<16) #define SBI_CTL_DEST_MPHY (0x1<<16) #define SBI_CTL_OP_IORD (0x2<<8) #define SBI_CTL_OP_IOWR (0x3<<8) #define SBI_CTL_OP_CRRD (0x6<<8) #define SBI_CTL_OP_CRWR (0x7<<8) #define SBI_RESPONSE_FAIL (0x1<<1) #define SBI_RESPONSE_SUCCESS (0x0<<1) #define SBI_BUSY (0x1<<0) #define SBI_READY (0x0<<0) /* SBI offsets */ #define SBI_SSCDIVINTPHASE6 0x0600 #define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1) #define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1) #define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8) #define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8) #define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15) #define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0) #define SBI_SSCCTL 0x020c #define SBI_SSCCTL6 0x060C #define SBI_SSCCTL_PATHALT (1<<3) #define SBI_SSCCTL_DISABLE (1<<0) #define SBI_SSCAUXDIV6 0x0610 #define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) #define SBI_DBUFF0 0x2a00 #define SBI_GEN0 0x1f00 #define SBI_GEN0_CFG_BUFFENABLE_DISABLE (1<<0) /* LPT PIXCLK_GATE */ #define PIXCLK_GATE 0xC6020 #define PIXCLK_GATE_UNGATE (1<<0) #define PIXCLK_GATE_GATE (0<<0) /* SPLL */ #define SPLL_CTL 0x46020 #define SPLL_PLL_ENABLE (1<<31) #define SPLL_PLL_SSC (1<<28) #define SPLL_PLL_NON_SSC (2<<28) #define SPLL_PLL_LCPLL (3<<28) #define SPLL_PLL_REF_MASK (3<<28) #define SPLL_PLL_FREQ_810MHz (0<<26) #define SPLL_PLL_FREQ_1350MHz (1<<26) #define SPLL_PLL_FREQ_2700MHz (2<<26) #define SPLL_PLL_FREQ_MASK (3<<26) /* WRPLL */ #define WRPLL_CTL1 0x46040 #define WRPLL_CTL2 0x46060 #define WRPLL_CTL(pll) (pll == 0 ? WRPLL_CTL1 : WRPLL_CTL2) #define WRPLL_PLL_ENABLE (1<<31) #define WRPLL_PLL_SSC (1<<28) #define WRPLL_PLL_NON_SSC (2<<28) #define WRPLL_PLL_LCPLL (3<<28) #define WRPLL_PLL_REF_MASK (3<<28) /* WRPLL divider programming */ #define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0) #define WRPLL_DIVIDER_REF_MASK (0xff) #define WRPLL_DIVIDER_POST(x) ((x)<<8) #define WRPLL_DIVIDER_POST_MASK (0x3f<<8) #define WRPLL_DIVIDER_POST_SHIFT 8 #define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16) #define WRPLL_DIVIDER_FB_SHIFT 16 #define WRPLL_DIVIDER_FB_MASK (0xff<<16) /* Port clock selection */ #define PORT_CLK_SEL_A 0x46100 #define PORT_CLK_SEL_B 0x46104 #define PORT_CLK_SEL(port) _PORT(port, PORT_CLK_SEL_A, PORT_CLK_SEL_B) #define PORT_CLK_SEL_LCPLL_2700 (0<<29) #define PORT_CLK_SEL_LCPLL_1350 (1<<29) #define PORT_CLK_SEL_LCPLL_810 (2<<29) #define PORT_CLK_SEL_SPLL (3<<29) #define PORT_CLK_SEL_WRPLL(pll) (((pll)+4)<<29) #define PORT_CLK_SEL_WRPLL1 (4<<29) #define PORT_CLK_SEL_WRPLL2 (5<<29) #define PORT_CLK_SEL_NONE (7<<29) #define PORT_CLK_SEL_MASK (7<<29) /* Transcoder clock selection */ #define TRANS_CLK_SEL_A 0x46140 #define TRANS_CLK_SEL_B 0x46144 #define TRANS_CLK_SEL(tran) _TRANSCODER(tran, TRANS_CLK_SEL_A, TRANS_CLK_SEL_B) /* For each transcoder, we need to select the corresponding port clock */ #define TRANS_CLK_SEL_DISABLED (0x0<<29) #define TRANS_CLK_SEL_PORT(x) ((x+1)<<29) #define TRANSA_MSA_MISC 0x60410 #define TRANSB_MSA_MISC 0x61410 #define TRANSC_MSA_MISC 0x62410 #define TRANS_EDP_MSA_MISC 0x6f410 #define TRANS_MSA_MISC(tran) _TRANSCODER2(tran, TRANSA_MSA_MISC) #define TRANS_MSA_SYNC_CLK (1<<0) #define TRANS_MSA_6_BPC (0<<5) #define TRANS_MSA_8_BPC (1<<5) #define TRANS_MSA_10_BPC (2<<5) #define TRANS_MSA_12_BPC (3<<5) #define TRANS_MSA_16_BPC (4<<5) /* LCPLL Control */ #define LCPLL_CTL 0x130040 #define LCPLL_PLL_DISABLE (1<<31) #define LCPLL_PLL_LOCK (1<<30) #define LCPLL_CLK_FREQ_MASK (3<<26) #define LCPLL_CLK_FREQ_450 (0<<26) #define LCPLL_CLK_FREQ_54O_BDW (1<<26) #define LCPLL_CLK_FREQ_337_5_BDW (2<<26) #define LCPLL_CLK_FREQ_675_BDW (3<<26) #define LCPLL_CD_CLOCK_DISABLE (1<<25) #define LCPLL_CD2X_CLOCK_DISABLE (1<<23) #define LCPLL_POWER_DOWN_ALLOW (1<<22) #define LCPLL_CD_SOURCE_FCLK (1<<21) #define LCPLL_CD_SOURCE_FCLK_DONE (1<<19) /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register, * since on HSW we can't write to it using I915_WRITE. */ #define D_COMP_HSW (MCHBAR_MIRROR_BASE_SNB + 0x5F0C) #define D_COMP_BDW 0x138144 #define D_COMP_RCOMP_IN_PROGRESS (1<<9) #define D_COMP_COMP_FORCE (1<<8) #define D_COMP_COMP_DISABLE (1<<0) /* Pipe WM_LINETIME - watermark line time */ #define PIPE_WM_LINETIME_A 0x45270 #define PIPE_WM_LINETIME_B 0x45274 #define PIPE_WM_LINETIME(pipe) _PIPE(pipe, PIPE_WM_LINETIME_A, \ PIPE_WM_LINETIME_B) #define PIPE_WM_LINETIME_MASK (0x1ff) #define PIPE_WM_LINETIME_TIME(x) ((x)) #define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) #define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16) /* SFUSE_STRAP */ #define SFUSE_STRAP 0xc2014 #define SFUSE_STRAP_FUSE_LOCK (1<<13) #define SFUSE_STRAP_DISPLAY_DISABLED (1<<7) #define SFUSE_STRAP_DDIB_DETECTED (1<<2) #define SFUSE_STRAP_DDIC_DETECTED (1<<1) #define SFUSE_STRAP_DDID_DETECTED (1<<0) #define WM_MISC 0x45260 #define WM_MISC_DATA_PARTITION_5_6 (1 << 0) #define WM_DBG 0x45280 #define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0) #define WM_DBG_DISALLOW_MAXFIFO (1<<1) #define WM_DBG_DISALLOW_SPRITE (1<<2) /* pipe CSC */ #define _PIPE_A_CSC_COEFF_RY_GY 0x49010 #define _PIPE_A_CSC_COEFF_BY 0x49014 #define _PIPE_A_CSC_COEFF_RU_GU 0x49018 #define _PIPE_A_CSC_COEFF_BU 0x4901c #define _PIPE_A_CSC_COEFF_RV_GV 0x49020 #define _PIPE_A_CSC_COEFF_BV 0x49024 #define _PIPE_A_CSC_MODE 0x49028 #define CSC_BLACK_SCREEN_OFFSET (1 << 2) #define CSC_POSITION_BEFORE_GAMMA (1 << 1) #define CSC_MODE_YUV_TO_RGB (1 << 0) #define _PIPE_A_CSC_PREOFF_HI 0x49030 #define _PIPE_A_CSC_PREOFF_ME 0x49034 #define _PIPE_A_CSC_PREOFF_LO 0x49038 #define _PIPE_A_CSC_POSTOFF_HI 0x49040 #define _PIPE_A_CSC_POSTOFF_ME 0x49044 #define _PIPE_A_CSC_POSTOFF_LO 0x49048 #define _PIPE_B_CSC_COEFF_RY_GY 0x49110 #define _PIPE_B_CSC_COEFF_BY 0x49114 #define _PIPE_B_CSC_COEFF_RU_GU 0x49118 #define _PIPE_B_CSC_COEFF_BU 0x4911c #define _PIPE_B_CSC_COEFF_RV_GV 0x49120 #define _PIPE_B_CSC_COEFF_BV 0x49124 #define _PIPE_B_CSC_MODE 0x49128 #define _PIPE_B_CSC_PREOFF_HI 0x49130 #define _PIPE_B_CSC_PREOFF_ME 0x49134 #define _PIPE_B_CSC_PREOFF_LO 0x49138 #define _PIPE_B_CSC_POSTOFF_HI 0x49140 #define _PIPE_B_CSC_POSTOFF_ME 0x49144 #define _PIPE_B_CSC_POSTOFF_LO 0x49148 #define PIPE_CSC_COEFF_RY_GY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RY_GY, _PIPE_B_CSC_COEFF_RY_GY) #define PIPE_CSC_COEFF_BY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BY, _PIPE_B_CSC_COEFF_BY) #define PIPE_CSC_COEFF_RU_GU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RU_GU, _PIPE_B_CSC_COEFF_RU_GU) #define PIPE_CSC_COEFF_BU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BU, _PIPE_B_CSC_COEFF_BU) #define PIPE_CSC_COEFF_RV_GV(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RV_GV, _PIPE_B_CSC_COEFF_RV_GV) #define PIPE_CSC_COEFF_BV(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BV, _PIPE_B_CSC_COEFF_BV) #define PIPE_CSC_MODE(pipe) _PIPE(pipe, _PIPE_A_CSC_MODE, _PIPE_B_CSC_MODE) #define PIPE_CSC_PREOFF_HI(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_HI, _PIPE_B_CSC_PREOFF_HI) #define PIPE_CSC_PREOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_ME, _PIPE_B_CSC_PREOFF_ME) #define PIPE_CSC_PREOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_LO, _PIPE_B_CSC_PREOFF_LO) #define PIPE_CSC_POSTOFF_HI(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_HI, _PIPE_B_CSC_POSTOFF_HI) #define PIPE_CSC_POSTOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME) #define PIPE_CSC_POSTOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO) /* VLV MIPI registers */ #define _MIPIA_PORT_CTRL (VLV_DISPLAY_BASE + 0x61190) #define _MIPIB_PORT_CTRL (VLV_DISPLAY_BASE + 0x61700) #define MIPI_PORT_CTRL(tc) _TRANSCODER(tc, _MIPIA_PORT_CTRL, \ _MIPIB_PORT_CTRL) #define DPI_ENABLE (1 << 31) /* A + B */ #define MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT 27 #define MIPIA_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 27) #define DUAL_LINK_MODE_MASK (1 << 26) #define DUAL_LINK_MODE_FRONT_BACK (0 << 26) #define DUAL_LINK_MODE_PIXEL_ALTERNATIVE (1 << 26) #define DITHERING_ENABLE (1 << 25) /* A + B */ #define FLOPPED_HSTX (1 << 23) #define DE_INVERT (1 << 19) /* XXX */ #define MIPIA_FLISDSI_DELAY_COUNT_SHIFT 18 #define MIPIA_FLISDSI_DELAY_COUNT_MASK (0xf << 18) #define AFE_LATCHOUT (1 << 17) #define LP_OUTPUT_HOLD (1 << 16) #define MIPIB_FLISDSI_DELAY_COUNT_HIGH_SHIFT 15 #define MIPIB_FLISDSI_DELAY_COUNT_HIGH_MASK (1 << 15) #define MIPIB_MIPI4DPHY_DELAY_COUNT_SHIFT 11 #define MIPIB_MIPI4DPHY_DELAY_COUNT_MASK (0xf << 11) #define CSB_SHIFT 9 #define CSB_MASK (3 << 9) #define CSB_20MHZ (0 << 9) #define CSB_10MHZ (1 << 9) #define CSB_40MHZ (2 << 9) #define BANDGAP_MASK (1 << 8) #define BANDGAP_PNW_CIRCUIT (0 << 8) #define BANDGAP_LNC_CIRCUIT (1 << 8) #define MIPIB_FLISDSI_DELAY_COUNT_LOW_SHIFT 5 #define MIPIB_FLISDSI_DELAY_COUNT_LOW_MASK (7 << 5) #define TEARING_EFFECT_DELAY (1 << 4) /* A + B */ #define TEARING_EFFECT_SHIFT 2 /* A + B */ #define TEARING_EFFECT_MASK (3 << 2) #define TEARING_EFFECT_OFF (0 << 2) #define TEARING_EFFECT_DSI (1 << 2) #define TEARING_EFFECT_GPIO (2 << 2) #define LANE_CONFIGURATION_SHIFT 0 #define LANE_CONFIGURATION_MASK (3 << 0) #define LANE_CONFIGURATION_4LANE (0 << 0) #define LANE_CONFIGURATION_DUAL_LINK_A (1 << 0) #define LANE_CONFIGURATION_DUAL_LINK_B (2 << 0) #define _MIPIA_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61194) #define _MIPIB_TEARING_CTRL (VLV_DISPLAY_BASE + 0x61704) #define MIPI_TEARING_CTRL(tc) _TRANSCODER(tc, \ _MIPIA_TEARING_CTRL, _MIPIB_TEARING_CTRL) #define TEARING_EFFECT_DELAY_SHIFT 0 #define TEARING_EFFECT_DELAY_MASK (0xffff << 0) /* XXX: all bits reserved */ #define _MIPIA_AUTOPWG (VLV_DISPLAY_BASE + 0x611a0) /* MIPI DSI Controller and D-PHY registers */ #define _MIPIA_DEVICE_READY (dev_priv->mipi_mmio_base + 0xb000) #define _MIPIB_DEVICE_READY (dev_priv->mipi_mmio_base + 0xb800) #define MIPI_DEVICE_READY(tc) _TRANSCODER(tc, _MIPIA_DEVICE_READY, \ _MIPIB_DEVICE_READY) #define BUS_POSSESSION (1 << 3) /* set to give bus to receiver */ #define ULPS_STATE_MASK (3 << 1) #define ULPS_STATE_ENTER (2 << 1) #define ULPS_STATE_EXIT (1 << 1) #define ULPS_STATE_NORMAL_OPERATION (0 << 1) #define DEVICE_READY (1 << 0) #define _MIPIA_INTR_STAT (dev_priv->mipi_mmio_base + 0xb004) #define _MIPIB_INTR_STAT (dev_priv->mipi_mmio_base + 0xb804) #define MIPI_INTR_STAT(tc) _TRANSCODER(tc, _MIPIA_INTR_STAT, \ _MIPIB_INTR_STAT) #define _MIPIA_INTR_EN (dev_priv->mipi_mmio_base + 0xb008) #define _MIPIB_INTR_EN (dev_priv->mipi_mmio_base + 0xb808) #define MIPI_INTR_EN(tc) _TRANSCODER(tc, _MIPIA_INTR_EN, \ _MIPIB_INTR_EN) #define TEARING_EFFECT (1 << 31) #define SPL_PKT_SENT_INTERRUPT (1 << 30) #define GEN_READ_DATA_AVAIL (1 << 29) #define LP_GENERIC_WR_FIFO_FULL (1 << 28) #define HS_GENERIC_WR_FIFO_FULL (1 << 27) #define RX_PROT_VIOLATION (1 << 26) #define RX_INVALID_TX_LENGTH (1 << 25) #define ACK_WITH_NO_ERROR (1 << 24) #define TURN_AROUND_ACK_TIMEOUT (1 << 23) #define LP_RX_TIMEOUT (1 << 22) #define HS_TX_TIMEOUT (1 << 21) #define DPI_FIFO_UNDERRUN (1 << 20) #define LOW_CONTENTION (1 << 19) #define HIGH_CONTENTION (1 << 18) #define TXDSI_VC_ID_INVALID (1 << 17) #define TXDSI_DATA_TYPE_NOT_RECOGNISED (1 << 16) #define TXCHECKSUM_ERROR (1 << 15) #define TXECC_MULTIBIT_ERROR (1 << 14) #define TXECC_SINGLE_BIT_ERROR (1 << 13) #define TXFALSE_CONTROL_ERROR (1 << 12) #define RXDSI_VC_ID_INVALID (1 << 11) #define RXDSI_DATA_TYPE_NOT_REGOGNISED (1 << 10) #define RXCHECKSUM_ERROR (1 << 9) #define RXECC_MULTIBIT_ERROR (1 << 8) #define RXECC_SINGLE_BIT_ERROR (1 << 7) #define RXFALSE_CONTROL_ERROR (1 << 6) #define RXHS_RECEIVE_TIMEOUT_ERROR (1 << 5) #define RX_LP_TX_SYNC_ERROR (1 << 4) #define RXEXCAPE_MODE_ENTRY_ERROR (1 << 3) #define RXEOT_SYNC_ERROR (1 << 2) #define RXSOT_SYNC_ERROR (1 << 1) #define RXSOT_ERROR (1 << 0) #define _MIPIA_DSI_FUNC_PRG (dev_priv->mipi_mmio_base + 0xb00c) #define _MIPIB_DSI_FUNC_PRG (dev_priv->mipi_mmio_base + 0xb80c) #define MIPI_DSI_FUNC_PRG(tc) _TRANSCODER(tc, _MIPIA_DSI_FUNC_PRG, \ _MIPIB_DSI_FUNC_PRG) #define CMD_MODE_DATA_WIDTH_MASK (7 << 13) #define CMD_MODE_NOT_SUPPORTED (0 << 13) #define CMD_MODE_DATA_WIDTH_16_BIT (1 << 13) #define CMD_MODE_DATA_WIDTH_9_BIT (2 << 13) #define CMD_MODE_DATA_WIDTH_8_BIT (3 << 13) #define CMD_MODE_DATA_WIDTH_OPTION1 (4 << 13) #define CMD_MODE_DATA_WIDTH_OPTION2 (5 << 13) #define VID_MODE_FORMAT_MASK (0xf << 7) #define VID_MODE_NOT_SUPPORTED (0 << 7) #define VID_MODE_FORMAT_RGB565 (1 << 7) #define VID_MODE_FORMAT_RGB666 (2 << 7) #define VID_MODE_FORMAT_RGB666_LOOSE (3 << 7) #define VID_MODE_FORMAT_RGB888 (4 << 7) #define CMD_MODE_CHANNEL_NUMBER_SHIFT 5 #define CMD_MODE_CHANNEL_NUMBER_MASK (3 << 5) #define VID_MODE_CHANNEL_NUMBER_SHIFT 3 #define VID_MODE_CHANNEL_NUMBER_MASK (3 << 3) #define DATA_LANES_PRG_REG_SHIFT 0 #define DATA_LANES_PRG_REG_MASK (7 << 0) #define _MIPIA_HS_TX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb010) #define _MIPIB_HS_TX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb810) #define MIPI_HS_TX_TIMEOUT(tc) _TRANSCODER(tc, _MIPIA_HS_TX_TIMEOUT, \ _MIPIB_HS_TX_TIMEOUT) #define HIGH_SPEED_TX_TIMEOUT_COUNTER_MASK 0xffffff #define _MIPIA_LP_RX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb014) #define _MIPIB_LP_RX_TIMEOUT (dev_priv->mipi_mmio_base + 0xb814) #define MIPI_LP_RX_TIMEOUT(tc) _TRANSCODER(tc, _MIPIA_LP_RX_TIMEOUT, \ _MIPIB_LP_RX_TIMEOUT) #define LOW_POWER_RX_TIMEOUT_COUNTER_MASK 0xffffff #define _MIPIA_TURN_AROUND_TIMEOUT (dev_priv->mipi_mmio_base + 0xb018) #define _MIPIB_TURN_AROUND_TIMEOUT (dev_priv->mipi_mmio_base + 0xb818) #define MIPI_TURN_AROUND_TIMEOUT(tc) _TRANSCODER(tc, \ _MIPIA_TURN_AROUND_TIMEOUT, _MIPIB_TURN_AROUND_TIMEOUT) #define TURN_AROUND_TIMEOUT_MASK 0x3f #define _MIPIA_DEVICE_RESET_TIMER (dev_priv->mipi_mmio_base + 0xb01c) #define _MIPIB_DEVICE_RESET_TIMER (dev_priv->mipi_mmio_base + 0xb81c) #define MIPI_DEVICE_RESET_TIMER(tc) _TRANSCODER(tc, \ _MIPIA_DEVICE_RESET_TIMER, _MIPIB_DEVICE_RESET_TIMER) #define DEVICE_RESET_TIMER_MASK 0xffff #define _MIPIA_DPI_RESOLUTION (dev_priv->mipi_mmio_base + 0xb020) #define _MIPIB_DPI_RESOLUTION (dev_priv->mipi_mmio_base + 0xb820) #define MIPI_DPI_RESOLUTION(tc) _TRANSCODER(tc, _MIPIA_DPI_RESOLUTION, \ _MIPIB_DPI_RESOLUTION) #define VERTICAL_ADDRESS_SHIFT 16 #define VERTICAL_ADDRESS_MASK (0xffff << 16) #define HORIZONTAL_ADDRESS_SHIFT 0 #define HORIZONTAL_ADDRESS_MASK 0xffff #define _MIPIA_DBI_FIFO_THROTTLE (dev_priv->mipi_mmio_base + 0xb024) #define _MIPIB_DBI_FIFO_THROTTLE (dev_priv->mipi_mmio_base + 0xb824) #define MIPI_DBI_FIFO_THROTTLE(tc) _TRANSCODER(tc, \ _MIPIA_DBI_FIFO_THROTTLE, _MIPIB_DBI_FIFO_THROTTLE) #define DBI_FIFO_EMPTY_HALF (0 << 0) #define DBI_FIFO_EMPTY_QUARTER (1 << 0) #define DBI_FIFO_EMPTY_7_LOCATIONS (2 << 0) /* regs below are bits 15:0 */ #define _MIPIA_HSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb028) #define _MIPIB_HSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb828) #define MIPI_HSYNC_PADDING_COUNT(tc) _TRANSCODER(tc, \ _MIPIA_HSYNC_PADDING_COUNT, _MIPIB_HSYNC_PADDING_COUNT) #define _MIPIA_HBP_COUNT (dev_priv->mipi_mmio_base + 0xb02c) #define _MIPIB_HBP_COUNT (dev_priv->mipi_mmio_base + 0xb82c) #define MIPI_HBP_COUNT(tc) _TRANSCODER(tc, _MIPIA_HBP_COUNT, \ _MIPIB_HBP_COUNT) #define _MIPIA_HFP_COUNT (dev_priv->mipi_mmio_base + 0xb030) #define _MIPIB_HFP_COUNT (dev_priv->mipi_mmio_base + 0xb830) #define MIPI_HFP_COUNT(tc) _TRANSCODER(tc, _MIPIA_HFP_COUNT, \ _MIPIB_HFP_COUNT) #define _MIPIA_HACTIVE_AREA_COUNT (dev_priv->mipi_mmio_base + 0xb034) #define _MIPIB_HACTIVE_AREA_COUNT (dev_priv->mipi_mmio_base + 0xb834) #define MIPI_HACTIVE_AREA_COUNT(tc) _TRANSCODER(tc, \ _MIPIA_HACTIVE_AREA_COUNT, _MIPIB_HACTIVE_AREA_COUNT) #define _MIPIA_VSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb038) #define _MIPIB_VSYNC_PADDING_COUNT (dev_priv->mipi_mmio_base + 0xb838) #define MIPI_VSYNC_PADDING_COUNT(tc) _TRANSCODER(tc, \ _MIPIA_VSYNC_PADDING_COUNT, _MIPIB_VSYNC_PADDING_COUNT) #define _MIPIA_VBP_COUNT (dev_priv->mipi_mmio_base + 0xb03c) #define _MIPIB_VBP_COUNT (dev_priv->mipi_mmio_base + 0xb83c) #define MIPI_VBP_COUNT(tc) _TRANSCODER(tc, _MIPIA_VBP_COUNT, \ _MIPIB_VBP_COUNT) #define _MIPIA_VFP_COUNT (dev_priv->mipi_mmio_base + 0xb040) #define _MIPIB_VFP_COUNT (dev_priv->mipi_mmio_base + 0xb840) #define MIPI_VFP_COUNT(tc) _TRANSCODER(tc, _MIPIA_VFP_COUNT, \ _MIPIB_VFP_COUNT) #define _MIPIA_HIGH_LOW_SWITCH_COUNT (dev_priv->mipi_mmio_base + 0xb044) #define _MIPIB_HIGH_LOW_SWITCH_COUNT (dev_priv->mipi_mmio_base + 0xb844) #define MIPI_HIGH_LOW_SWITCH_COUNT(tc) _TRANSCODER(tc, \ _MIPIA_HIGH_LOW_SWITCH_COUNT, _MIPIB_HIGH_LOW_SWITCH_COUNT) /* regs above are bits 15:0 */ #define _MIPIA_DPI_CONTROL (dev_priv->mipi_mmio_base + 0xb048) #define _MIPIB_DPI_CONTROL (dev_priv->mipi_mmio_base + 0xb848) #define MIPI_DPI_CONTROL(tc) _TRANSCODER(tc, _MIPIA_DPI_CONTROL, \ _MIPIB_DPI_CONTROL) #define DPI_LP_MODE (1 << 6) #define BACKLIGHT_OFF (1 << 5) #define BACKLIGHT_ON (1 << 4) #define COLOR_MODE_OFF (1 << 3) #define COLOR_MODE_ON (1 << 2) #define TURN_ON (1 << 1) #define SHUTDOWN (1 << 0) #define _MIPIA_DPI_DATA (dev_priv->mipi_mmio_base + 0xb04c) #define _MIPIB_DPI_DATA (dev_priv->mipi_mmio_base + 0xb84c) #define MIPI_DPI_DATA(tc) _TRANSCODER(tc, _MIPIA_DPI_DATA, \ _MIPIB_DPI_DATA) #define COMMAND_BYTE_SHIFT 0 #define COMMAND_BYTE_MASK (0x3f << 0) #define _MIPIA_INIT_COUNT (dev_priv->mipi_mmio_base + 0xb050) #define _MIPIB_INIT_COUNT (dev_priv->mipi_mmio_base + 0xb850) #define MIPI_INIT_COUNT(tc) _TRANSCODER(tc, _MIPIA_INIT_COUNT, \ _MIPIB_INIT_COUNT) #define MASTER_INIT_TIMER_SHIFT 0 #define MASTER_INIT_TIMER_MASK (0xffff << 0) #define _MIPIA_MAX_RETURN_PKT_SIZE (dev_priv->mipi_mmio_base + 0xb054) #define _MIPIB_MAX_RETURN_PKT_SIZE (dev_priv->mipi_mmio_base + 0xb854) #define MIPI_MAX_RETURN_PKT_SIZE(tc) _TRANSCODER(tc, \ _MIPIA_MAX_RETURN_PKT_SIZE, _MIPIB_MAX_RETURN_PKT_SIZE) #define MAX_RETURN_PKT_SIZE_SHIFT 0 #define MAX_RETURN_PKT_SIZE_MASK (0x3ff << 0) #define _MIPIA_VIDEO_MODE_FORMAT (dev_priv->mipi_mmio_base + 0xb058) #define _MIPIB_VIDEO_MODE_FORMAT (dev_priv->mipi_mmio_base + 0xb858) #define MIPI_VIDEO_MODE_FORMAT(tc) _TRANSCODER(tc, \ _MIPIA_VIDEO_MODE_FORMAT, _MIPIB_VIDEO_MODE_FORMAT) #define RANDOM_DPI_DISPLAY_RESOLUTION (1 << 4) #define DISABLE_VIDEO_BTA (1 << 3) #define IP_TG_CONFIG (1 << 2) #define VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE (1 << 0) #define VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS (2 << 0) #define VIDEO_MODE_BURST (3 << 0) #define _MIPIA_EOT_DISABLE (dev_priv->mipi_mmio_base + 0xb05c) #define _MIPIB_EOT_DISABLE (dev_priv->mipi_mmio_base + 0xb85c) #define MIPI_EOT_DISABLE(tc) _TRANSCODER(tc, _MIPIA_EOT_DISABLE, \ _MIPIB_EOT_DISABLE) #define LP_RX_TIMEOUT_ERROR_RECOVERY_DISABLE (1 << 7) #define HS_RX_TIMEOUT_ERROR_RECOVERY_DISABLE (1 << 6) #define LOW_CONTENTION_RECOVERY_DISABLE (1 << 5) #define HIGH_CONTENTION_RECOVERY_DISABLE (1 << 4) #define TXDSI_TYPE_NOT_RECOGNISED_ERROR_RECOVERY_DISABLE (1 << 3) #define TXECC_MULTIBIT_ERROR_RECOVERY_DISABLE (1 << 2) #define CLOCKSTOP (1 << 1) #define EOT_DISABLE (1 << 0) #define _MIPIA_LP_BYTECLK (dev_priv->mipi_mmio_base + 0xb060) #define _MIPIB_LP_BYTECLK (dev_priv->mipi_mmio_base + 0xb860) #define MIPI_LP_BYTECLK(tc) _TRANSCODER(tc, _MIPIA_LP_BYTECLK, \ _MIPIB_LP_BYTECLK) #define LP_BYTECLK_SHIFT 0 #define LP_BYTECLK_MASK (0xffff << 0) /* bits 31:0 */ #define _MIPIA_LP_GEN_DATA (dev_priv->mipi_mmio_base + 0xb064) #define _MIPIB_LP_GEN_DATA (dev_priv->mipi_mmio_base + 0xb864) #define MIPI_LP_GEN_DATA(tc) _TRANSCODER(tc, _MIPIA_LP_GEN_DATA, \ _MIPIB_LP_GEN_DATA) /* bits 31:0 */ #define _MIPIA_HS_GEN_DATA (dev_priv->mipi_mmio_base + 0xb068) #define _MIPIB_HS_GEN_DATA (dev_priv->mipi_mmio_base + 0xb868) #define MIPI_HS_GEN_DATA(tc) _TRANSCODER(tc, _MIPIA_HS_GEN_DATA, \ _MIPIB_HS_GEN_DATA) #define _MIPIA_LP_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb06c) #define _MIPIB_LP_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb86c) #define MIPI_LP_GEN_CTRL(tc) _TRANSCODER(tc, _MIPIA_LP_GEN_CTRL, \ _MIPIB_LP_GEN_CTRL) #define _MIPIA_HS_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb070) #define _MIPIB_HS_GEN_CTRL (dev_priv->mipi_mmio_base + 0xb870) #define MIPI_HS_GEN_CTRL(tc) _TRANSCODER(tc, _MIPIA_HS_GEN_CTRL, \ _MIPIB_HS_GEN_CTRL) #define LONG_PACKET_WORD_COUNT_SHIFT 8 #define LONG_PACKET_WORD_COUNT_MASK (0xffff << 8) #define SHORT_PACKET_PARAM_SHIFT 8 #define SHORT_PACKET_PARAM_MASK (0xffff << 8) #define VIRTUAL_CHANNEL_SHIFT 6 #define VIRTUAL_CHANNEL_MASK (3 << 6) #define DATA_TYPE_SHIFT 0 #define DATA_TYPE_MASK (3f << 0) /* data type values, see include/video/mipi_display.h */ #define _MIPIA_GEN_FIFO_STAT (dev_priv->mipi_mmio_base + 0xb074) #define _MIPIB_GEN_FIFO_STAT (dev_priv->mipi_mmio_base + 0xb874) #define MIPI_GEN_FIFO_STAT(tc) _TRANSCODER(tc, _MIPIA_GEN_FIFO_STAT, \ _MIPIB_GEN_FIFO_STAT) #define DPI_FIFO_EMPTY (1 << 28) #define DBI_FIFO_EMPTY (1 << 27) #define LP_CTRL_FIFO_EMPTY (1 << 26) #define LP_CTRL_FIFO_HALF_EMPTY (1 << 25) #define LP_CTRL_FIFO_FULL (1 << 24) #define HS_CTRL_FIFO_EMPTY (1 << 18) #define HS_CTRL_FIFO_HALF_EMPTY (1 << 17) #define HS_CTRL_FIFO_FULL (1 << 16) #define LP_DATA_FIFO_EMPTY (1 << 10) #define LP_DATA_FIFO_HALF_EMPTY (1 << 9) #define LP_DATA_FIFO_FULL (1 << 8) #define HS_DATA_FIFO_EMPTY (1 << 2) #define HS_DATA_FIFO_HALF_EMPTY (1 << 1) #define HS_DATA_FIFO_FULL (1 << 0) #define _MIPIA_HS_LS_DBI_ENABLE (dev_priv->mipi_mmio_base + 0xb078) #define _MIPIB_HS_LS_DBI_ENABLE (dev_priv->mipi_mmio_base + 0xb878) #define MIPI_HS_LP_DBI_ENABLE(tc) _TRANSCODER(tc, \ _MIPIA_HS_LS_DBI_ENABLE, _MIPIB_HS_LS_DBI_ENABLE) #define DBI_HS_LP_MODE_MASK (1 << 0) #define DBI_LP_MODE (1 << 0) #define DBI_HS_MODE (0 << 0) #define _MIPIA_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb080) #define _MIPIB_DPHY_PARAM (dev_priv->mipi_mmio_base + 0xb880) #define MIPI_DPHY_PARAM(tc) _TRANSCODER(tc, _MIPIA_DPHY_PARAM, \ _MIPIB_DPHY_PARAM) #define EXIT_ZERO_COUNT_SHIFT 24 #define EXIT_ZERO_COUNT_MASK (0x3f << 24) #define TRAIL_COUNT_SHIFT 16 #define TRAIL_COUNT_MASK (0x1f << 16) #define CLK_ZERO_COUNT_SHIFT 8 #define CLK_ZERO_COUNT_MASK (0xff << 8) #define PREPARE_COUNT_SHIFT 0 #define PREPARE_COUNT_MASK (0x3f << 0) /* bits 31:0 */ #define _MIPIA_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb084) #define _MIPIB_DBI_BW_CTRL (dev_priv->mipi_mmio_base + 0xb884) #define MIPI_DBI_BW_CTRL(tc) _TRANSCODER(tc, _MIPIA_DBI_BW_CTRL, \ _MIPIB_DBI_BW_CTRL) #define _MIPIA_CLK_LANE_SWITCH_TIME_CNT (dev_priv->mipi_mmio_base \ + 0xb088) #define _MIPIB_CLK_LANE_SWITCH_TIME_CNT (dev_priv->mipi_mmio_base \ + 0xb888) #define MIPI_CLK_LANE_SWITCH_TIME_CNT(tc) _TRANSCODER(tc, \ _MIPIA_CLK_LANE_SWITCH_TIME_CNT, _MIPIB_CLK_LANE_SWITCH_TIME_CNT) #define LP_HS_SSW_CNT_SHIFT 16 #define LP_HS_SSW_CNT_MASK (0xffff << 16) #define HS_LP_PWR_SW_CNT_SHIFT 0 #define HS_LP_PWR_SW_CNT_MASK (0xffff << 0) #define _MIPIA_STOP_STATE_STALL (dev_priv->mipi_mmio_base + 0xb08c) #define _MIPIB_STOP_STATE_STALL (dev_priv->mipi_mmio_base + 0xb88c) #define MIPI_STOP_STATE_STALL(tc) _TRANSCODER(tc, \ _MIPIA_STOP_STATE_STALL, _MIPIB_STOP_STATE_STALL) #define STOP_STATE_STALL_COUNTER_SHIFT 0 #define STOP_STATE_STALL_COUNTER_MASK (0xff << 0) #define _MIPIA_INTR_STAT_REG_1 (dev_priv->mipi_mmio_base + 0xb090) #define _MIPIB_INTR_STAT_REG_1 (dev_priv->mipi_mmio_base + 0xb890) #define MIPI_INTR_STAT_REG_1(tc) _TRANSCODER(tc, \ _MIPIA_INTR_STAT_REG_1, _MIPIB_INTR_STAT_REG_1) #define _MIPIA_INTR_EN_REG_1 (dev_priv->mipi_mmio_base + 0xb094) #define _MIPIB_INTR_EN_REG_1 (dev_priv->mipi_mmio_base + 0xb894) #define MIPI_INTR_EN_REG_1(tc) _TRANSCODER(tc, _MIPIA_INTR_EN_REG_1, \ _MIPIB_INTR_EN_REG_1) #define RX_CONTENTION_DETECTED (1 << 0) /* XXX: only pipe A ?!? */ #define MIPIA_DBI_TYPEC_CTRL (dev_priv->mipi_mmio_base + 0xb100) #define DBI_TYPEC_ENABLE (1 << 31) #define DBI_TYPEC_WIP (1 << 30) #define DBI_TYPEC_OPTION_SHIFT 28 #define DBI_TYPEC_OPTION_MASK (3 << 28) #define DBI_TYPEC_FREQ_SHIFT 24 #define DBI_TYPEC_FREQ_MASK (0xf << 24) #define DBI_TYPEC_OVERRIDE (1 << 8) #define DBI_TYPEC_OVERRIDE_COUNTER_SHIFT 0 #define DBI_TYPEC_OVERRIDE_COUNTER_MASK (0xff << 0) /* MIPI adapter registers */ #define _MIPIA_CTRL (dev_priv->mipi_mmio_base + 0xb104) #define _MIPIB_CTRL (dev_priv->mipi_mmio_base + 0xb904) #define MIPI_CTRL(tc) _TRANSCODER(tc, _MIPIA_CTRL, \ _MIPIB_CTRL) #define ESCAPE_CLOCK_DIVIDER_SHIFT 5 /* A only */ #define ESCAPE_CLOCK_DIVIDER_MASK (3 << 5) #define ESCAPE_CLOCK_DIVIDER_1 (0 << 5) #define ESCAPE_CLOCK_DIVIDER_2 (1 << 5) #define ESCAPE_CLOCK_DIVIDER_4 (2 << 5) #define READ_REQUEST_PRIORITY_SHIFT 3 #define READ_REQUEST_PRIORITY_MASK (3 << 3) #define READ_REQUEST_PRIORITY_LOW (0 << 3) #define READ_REQUEST_PRIORITY_HIGH (3 << 3) #define RGB_FLIP_TO_BGR (1 << 2) #define _MIPIA_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb108) #define _MIPIB_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb908) #define MIPI_DATA_ADDRESS(tc) _TRANSCODER(tc, _MIPIA_DATA_ADDRESS, \ _MIPIB_DATA_ADDRESS) #define DATA_MEM_ADDRESS_SHIFT 5 #define DATA_MEM_ADDRESS_MASK (0x7ffffff << 5) #define DATA_VALID (1 << 0) #define _MIPIA_DATA_LENGTH (dev_priv->mipi_mmio_base + 0xb10c) #define _MIPIB_DATA_LENGTH (dev_priv->mipi_mmio_base + 0xb90c) #define MIPI_DATA_LENGTH(tc) _TRANSCODER(tc, _MIPIA_DATA_LENGTH, \ _MIPIB_DATA_LENGTH) #define DATA_LENGTH_SHIFT 0 #define DATA_LENGTH_MASK (0xfffff << 0) #define _MIPIA_COMMAND_ADDRESS (dev_priv->mipi_mmio_base + 0xb110) #define _MIPIB_COMMAND_ADDRESS (dev_priv->mipi_mmio_base + 0xb910) #define MIPI_COMMAND_ADDRESS(tc) _TRANSCODER(tc, \ _MIPIA_COMMAND_ADDRESS, _MIPIB_COMMAND_ADDRESS) #define COMMAND_MEM_ADDRESS_SHIFT 5 #define COMMAND_MEM_ADDRESS_MASK (0x7ffffff << 5) #define AUTO_PWG_ENABLE (1 << 2) #define MEMORY_WRITE_DATA_FROM_PIPE_RENDERING (1 << 1) #define COMMAND_VALID (1 << 0) #define _MIPIA_COMMAND_LENGTH (dev_priv->mipi_mmio_base + 0xb114) #define _MIPIB_COMMAND_LENGTH (dev_priv->mipi_mmio_base + 0xb914) #define MIPI_COMMAND_LENGTH(tc) _TRANSCODER(tc, _MIPIA_COMMAND_LENGTH, \ _MIPIB_COMMAND_LENGTH) #define COMMAND_LENGTH_SHIFT(n) (8 * (n)) /* n: 0...3 */ #define COMMAND_LENGTH_MASK(n) (0xff << (8 * (n))) #define _MIPIA_READ_DATA_RETURN0 (dev_priv->mipi_mmio_base + 0xb118) #define _MIPIB_READ_DATA_RETURN0 (dev_priv->mipi_mmio_base + 0xb918) #define MIPI_READ_DATA_RETURN(tc, n) \ (_TRANSCODER(tc, _MIPIA_READ_DATA_RETURN0, _MIPIB_READ_DATA_RETURN0) \ + 4 * (n)) /* n: 0...7 */ #define _MIPIA_READ_DATA_VALID (dev_priv->mipi_mmio_base + 0xb138) #define _MIPIB_READ_DATA_VALID (dev_priv->mipi_mmio_base + 0xb938) #define MIPI_READ_DATA_VALID(tc) _TRANSCODER(tc, \ _MIPIA_READ_DATA_VALID, _MIPIB_READ_DATA_VALID) #define READ_DATA_VALID(n) (1 << (n)) /* For UMS only (deprecated): */ #define _PALETTE_A (dev_priv->info.display_mmio_offset + 0xa000) #define _PALETTE_B (dev_priv->info.display_mmio_offset + 0xa800) #endif /* _I915_REG_H_ */