/* * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini * Copyright (C) 2010 Linus Walleij for ST-Ericsson * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as * published by the Free Software Foundation. */ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/clockchips.h> #include <linux/clocksource.h> #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> /* * The MTU device hosts four different counters, with 4 set of * registers. These are register names. */ #define MTU_IMSC 0x00 /* Interrupt mask set/clear */ #define MTU_RIS 0x04 /* Raw interrupt status */ #define MTU_MIS 0x08 /* Masked interrupt status */ #define MTU_ICR 0x0C /* Interrupt clear register */ /* per-timer registers take 0..3 as argument */ #define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ #define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ #define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ #define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ /* bits for the control register */ #define MTU_CRn_ENA 0x80 #define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ #define MTU_CRn_PRESCALE_MASK 0x0c #define MTU_CRn_PRESCALE_1 0x00 #define MTU_CRn_PRESCALE_16 0x04 #define MTU_CRn_PRESCALE_256 0x08 #define MTU_CRn_32BITS 0x02 #define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ /* Other registers are usual amba/primecell registers, currently not used */ #define MTU_ITCR 0xff0 #define MTU_ITOP 0xff4 #define MTU_PERIPH_ID0 0xfe0 #define MTU_PERIPH_ID1 0xfe4 #define MTU_PERIPH_ID2 0xfe8 #define MTU_PERIPH_ID3 0xfeC #define MTU_PCELL0 0xff0 #define MTU_PCELL1 0xff4 #define MTU_PCELL2 0xff8 #define MTU_PCELL3 0xffC static void __iomem *mtu_base; static bool clkevt_periodic; static u32 clk_prescale; static u32 nmdk_cycle; /* write-once */ #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ static u32 notrace nomadik_read_sched_clock(void) { if (unlikely(!mtu_base)) return 0; return -readl(mtu_base + MTU_VAL(0)); } #endif /* Clockevent device: use one-shot mode */ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) { writel(1 << 1, mtu_base + MTU_IMSC); writel(evt, mtu_base + MTU_LR(1)); /* Load highest value, enable device, enable interrupts */ writel(MTU_CRn_ONESHOT | clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, mtu_base + MTU_CR(1)); return 0; } void nmdk_clkevt_reset(void) { if (clkevt_periodic) { /* Timer: configure load and background-load, and fire it up */ writel(nmdk_cycle, mtu_base + MTU_LR(1)); writel(nmdk_cycle, mtu_base + MTU_BGLR(1)); writel(MTU_CRn_PERIODIC | clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, mtu_base + MTU_CR(1)); writel(1 << 1, mtu_base + MTU_IMSC); } else { /* Generate an interrupt to start the clockevent again */ (void) nmdk_clkevt_next(nmdk_cycle, NULL); } } static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: clkevt_periodic = true; nmdk_clkevt_reset(); break; case CLOCK_EVT_MODE_ONESHOT: clkevt_periodic = false; break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: writel(0, mtu_base + MTU_IMSC); /* disable timer */ writel(0, mtu_base + MTU_CR(1)); /* load some high default value */ writel(0xffffffff, mtu_base + MTU_LR(1)); break; case CLOCK_EVT_MODE_RESUME: break; } } static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, }; /* * IRQ Handler for timer 1 of the MTU block. */ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evdev = dev_id; writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ evdev->event_handler(evdev); return IRQ_HANDLED; } static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = nmdk_timer_interrupt, .dev_id = &nmdk_clkevt, }; void nmdk_clksrc_reset(void) { /* Disable */ writel(0, mtu_base + MTU_CR(0)); /* ClockSource: configure load and background-load, and fire it up */ writel(nmdk_cycle, mtu_base + MTU_LR(0)); writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, mtu_base + MTU_CR(0)); } void __init nmdk_timer_init(void __iomem *base, int irq) { unsigned long rate; struct clk *clk0, *pclk0; mtu_base = base; pclk0 = clk_get_sys("mtu0", "apb_pclk"); BUG_ON(IS_ERR(pclk0)); BUG_ON(clk_prepare(pclk0) < 0); BUG_ON(clk_enable(pclk0) < 0); clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); BUG_ON(clk_prepare(clk0) < 0); BUG_ON(clk_enable(clk0) < 0); /* * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz * for ux500. * Use a divide-by-16 counter if the tick rate is more than 32MHz. * At 32 MHz, the timer (with 32 bit counter) can be programmed * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer * with 16 gives too low timer resolution. */ rate = clk_get_rate(clk0); if (rate > 32000000) { rate /= 16; clk_prescale = MTU_CRn_PRESCALE_16; } else { clk_prescale = MTU_CRn_PRESCALE_1; } /* Cycles for periodic mode */ nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ); /* Timer 0 is the free running clocksource */ nmdk_clksrc_reset(); if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0", rate, 200, 32, clocksource_mmio_readl_down)) pr_err("timer: failed to initialize clock source %s\n", "mtu_0"); #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK setup_sched_clock(nomadik_read_sched_clock, 32, rate); #endif /* Timer 1 is used for events, register irq and clockevents */ setup_irq(irq, &nmdk_timer_irq); nmdk_clkevt.cpumask = cpumask_of(0); clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU); }