// SPDX-License-Identifier: GPL-2.0+ /* * ipmi_poweroff.c * * MontaVista IPMI Poweroff extension to sys_reboot * * Author: MontaVista Software, Inc. * Steven Dake * Corey Minyard * source@mvista.com * * Copyright 2002,2004 MontaVista Software Inc. */ #include #include #include #include #include #include #include #include #include #define PFX "IPMI poweroff: " static void ipmi_po_smi_gone(int if_num); static void ipmi_po_new_smi(int if_num, struct device *device); /* Definitions for controlling power off (if the system supports it). It * conveniently matches the IPMI chassis control values. */ #define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */ #define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */ /* the IPMI data command */ static int poweroff_powercycle; /* Which interface to use, -1 means the first we see. */ static int ifnum_to_use = -1; /* Our local state. */ static int ready; static ipmi_user_t ipmi_user; static int ipmi_ifnum; static void (*specific_poweroff_func)(ipmi_user_t user); /* Holds the old poweroff function so we can restore it on removal. */ static void (*old_poweroff_func)(void); static int set_param_ifnum(const char *val, const struct kernel_param *kp) { int rv = param_set_int(val, kp); if (rv) return rv; if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum)) return 0; ipmi_po_smi_gone(ipmi_ifnum); ipmi_po_new_smi(ifnum_to_use, NULL); return 0; } module_param_call(ifnum_to_use, set_param_ifnum, param_get_int, &ifnum_to_use, 0644); MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " "timer. Setting to -1 defaults to the first registered " "interface"); /* parameter definition to allow user to flag power cycle */ module_param(poweroff_powercycle, int, 0644); MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power" " down. Power cycle is contingent on hardware support," " otherwise it defaults back to power down."); /* Stuff from the get device id command. */ static unsigned int mfg_id; static unsigned int prod_id; static unsigned char capabilities; static unsigned char ipmi_version; /* * We use our own messages for this operation, we don't let the system * allocate them, since we may be in a panic situation. The whole * thing is single-threaded, anyway, so multiple messages are not * required. */ static atomic_t dummy_count = ATOMIC_INIT(0); static void dummy_smi_free(struct ipmi_smi_msg *msg) { atomic_dec(&dummy_count); } static void dummy_recv_free(struct ipmi_recv_msg *msg) { atomic_dec(&dummy_count); } static struct ipmi_smi_msg halt_smi_msg = { .done = dummy_smi_free }; static struct ipmi_recv_msg halt_recv_msg = { .done = dummy_recv_free }; /* * Code to send a message and wait for the response. */ static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) { struct completion *comp = recv_msg->user_msg_data; if (comp) complete(comp); } static const struct ipmi_user_hndl ipmi_poweroff_handler = { .ipmi_recv_hndl = receive_handler }; static int ipmi_request_wait_for_response(ipmi_user_t user, struct ipmi_addr *addr, struct kernel_ipmi_msg *send_msg) { int rv; struct completion comp; init_completion(&comp); rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp, &halt_smi_msg, &halt_recv_msg, 0); if (rv) return rv; wait_for_completion(&comp); return halt_recv_msg.msg.data[0]; } /* Wait for message to complete, spinning. */ static int ipmi_request_in_rc_mode(ipmi_user_t user, struct ipmi_addr *addr, struct kernel_ipmi_msg *send_msg) { int rv; atomic_set(&dummy_count, 2); rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, &halt_smi_msg, &halt_recv_msg, 0); if (rv) { atomic_set(&dummy_count, 0); return rv; } /* * Spin until our message is done. */ while (atomic_read(&dummy_count) > 0) { ipmi_poll_interface(user); cpu_relax(); } return halt_recv_msg.msg.data[0]; } /* * ATCA Support */ #define IPMI_NETFN_ATCA 0x2c #define IPMI_ATCA_SET_POWER_CMD 0x11 #define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 #define IPMI_PICMG_ID 0 #define IPMI_NETFN_OEM 0x2e #define IPMI_ATCA_PPS_GRACEFUL_RESTART 0x11 #define IPMI_ATCA_PPS_IANA "\x00\x40\x0A" #define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1 #define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051 static void (*atca_oem_poweroff_hook)(ipmi_user_t user); static void pps_poweroff_atca(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; /* * Configure IPMI address for local access */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; printk(KERN_INFO PFX "PPS powerdown hook used"); send_msg.netfn = IPMI_NETFN_OEM; send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; send_msg.data = IPMI_ATCA_PPS_IANA; send_msg.data_len = 3; rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { printk(KERN_ERR PFX "Unable to send ATCA ," " IPMI error 0x%x\n", rv); } return; } static int ipmi_atca_detect(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; /* * Configure IPMI address for local access */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; /* * Use get address info to check and see if we are ATCA */ send_msg.netfn = IPMI_NETFN_ATCA; send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; data[0] = IPMI_PICMG_ID; send_msg.data = data; send_msg.data_len = sizeof(data); rv = ipmi_request_wait_for_response(user, (struct ipmi_addr *) &smi_addr, &send_msg); printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id); if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { printk(KERN_INFO PFX "Installing Pigeon Point Systems Poweroff Hook\n"); atca_oem_poweroff_hook = pps_poweroff_atca; } return !rv; } static void ipmi_poweroff_atca(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[4]; /* * Configure IPMI address for local access */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via ATCA power command\n"); /* * Power down */ send_msg.netfn = IPMI_NETFN_ATCA; send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; data[0] = IPMI_PICMG_ID; data[1] = 0; /* FRU id */ data[2] = 0; /* Power Level */ data[3] = 0; /* Don't change saved presets */ send_msg.data = data; send_msg.data_len = sizeof(data); rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); /* * At this point, the system may be shutting down, and most * serial drivers (if used) will have interrupts turned off * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE * return code */ if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { printk(KERN_ERR PFX "Unable to send ATCA powerdown message," " IPMI error 0x%x\n", rv); goto out; } if (atca_oem_poweroff_hook) atca_oem_poweroff_hook(user); out: return; } /* * CPI1 Support */ #define IPMI_NETFN_OEM_1 0xf8 #define OEM_GRP_CMD_SET_RESET_STATE 0x84 #define OEM_GRP_CMD_SET_POWER_STATE 0x82 #define IPMI_NETFN_OEM_8 0xf8 #define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 #define OEM_GRP_CMD_GET_SLOT_GA 0xa3 #define IPMI_NETFN_SENSOR_EVT 0x10 #define IPMI_CMD_GET_EVENT_RECEIVER 0x01 #define IPMI_CPI1_PRODUCT_ID 0x000157 #define IPMI_CPI1_MANUFACTURER_ID 0x0108 static int ipmi_cpi1_detect(ipmi_user_t user) { return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) && (prod_id == IPMI_CPI1_PRODUCT_ID)); } static void ipmi_poweroff_cpi1(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct ipmi_ipmb_addr ipmb_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; int slot; unsigned char hotswap_ipmb; unsigned char aer_addr; unsigned char aer_lun; /* * Configure IPMI address for local access */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); /* * Get IPMI ipmb address */ send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; send_msg.data = NULL; send_msg.data_len = 0; rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) goto out; slot = halt_recv_msg.msg.data[1]; hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); /* * Get active event receiver */ send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; send_msg.data = NULL; send_msg.data_len = 0; rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) goto out; aer_addr = halt_recv_msg.msg.data[1]; aer_lun = halt_recv_msg.msg.data[2]; /* * Setup IPMB address target instead of local target */ ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; ipmb_addr.channel = 0; ipmb_addr.slave_addr = aer_addr; ipmb_addr.lun = aer_lun; /* * Send request hotswap control to remove blade from dpv */ send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; send_msg.data = &hotswap_ipmb; send_msg.data_len = 1; ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &ipmb_addr, &send_msg); /* * Set reset asserted */ send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; send_msg.data = data; data[0] = 1; /* Reset asserted state */ send_msg.data_len = 1; rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) goto out; /* * Power down */ send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; send_msg.data = data; data[0] = 1; /* Power down state */ send_msg.data_len = 1; rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) goto out; out: return; } /* * ipmi_dell_chassis_detect() * Dell systems with IPMI < 1.5 don't set the chassis capability bit * but they can handle a chassis poweroff or powercycle command. */ #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} static int ipmi_dell_chassis_detect(ipmi_user_t user) { const char ipmi_version_major = ipmi_version & 0xF; const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; const char mfr[3] = DELL_IANA_MFR_ID; if (!memcmp(mfr, &mfg_id, sizeof(mfr)) && ipmi_version_major <= 1 && ipmi_version_minor < 5) return 1; return 0; } /* * Standard chassis support */ #define IPMI_NETFN_CHASSIS_REQUEST 0 #define IPMI_CHASSIS_CONTROL_CMD 0x02 static int ipmi_chassis_detect(ipmi_user_t user) { /* Chassis support, use it. */ return (capabilities & 0x80); } static void ipmi_poweroff_chassis(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; /* * Configure IPMI address for local access */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; powercyclefailed: printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", (poweroff_powercycle ? "cycle" : "down")); /* * Power down */ send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; if (poweroff_powercycle) data[0] = IPMI_CHASSIS_POWER_CYCLE; else data[0] = IPMI_CHASSIS_POWER_DOWN; send_msg.data = data; send_msg.data_len = sizeof(data); rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) { if (poweroff_powercycle) { /* power cycle failed, default to power down */ printk(KERN_ERR PFX "Unable to send chassis power " \ "cycle message, IPMI error 0x%x\n", rv); poweroff_powercycle = 0; goto powercyclefailed; } printk(KERN_ERR PFX "Unable to send chassis power " \ "down message, IPMI error 0x%x\n", rv); } } /* Table of possible power off functions. */ struct poweroff_function { char *platform_type; int (*detect)(ipmi_user_t user); void (*poweroff_func)(ipmi_user_t user); }; static struct poweroff_function poweroff_functions[] = { { .platform_type = "ATCA", .detect = ipmi_atca_detect, .poweroff_func = ipmi_poweroff_atca }, { .platform_type = "CPI1", .detect = ipmi_cpi1_detect, .poweroff_func = ipmi_poweroff_cpi1 }, { .platform_type = "chassis", .detect = ipmi_dell_chassis_detect, .poweroff_func = ipmi_poweroff_chassis }, /* Chassis should generally be last, other things should override it. */ { .platform_type = "chassis", .detect = ipmi_chassis_detect, .poweroff_func = ipmi_poweroff_chassis }, }; #define NUM_PO_FUNCS ARRAY_SIZE(poweroff_functions) /* Called on a powerdown request. */ static void ipmi_poweroff_function(void) { if (!ready) return; /* Use run-to-completion mode, since interrupts may be off. */ specific_poweroff_func(ipmi_user); } /* Wait for an IPMI interface to be installed, the first one installed will be grabbed by this code and used to perform the powerdown. */ static void ipmi_po_new_smi(int if_num, struct device *device) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; int i; if (ready) return; if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num)) return; rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, &ipmi_user); if (rv) { printk(KERN_ERR PFX "could not create IPMI user, error %d\n", rv); return; } ipmi_ifnum = if_num; /* * Do a get device ide and store some results, since this is * used by several functions. */ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; smi_addr.channel = IPMI_BMC_CHANNEL; smi_addr.lun = 0; send_msg.netfn = IPMI_NETFN_APP_REQUEST; send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; send_msg.data = NULL; send_msg.data_len = 0; rv = ipmi_request_wait_for_response(ipmi_user, (struct ipmi_addr *) &smi_addr, &send_msg); if (rv) { printk(KERN_ERR PFX "Unable to send IPMI get device id info," " IPMI error 0x%x\n", rv); goto out_err; } if (halt_recv_msg.msg.data_len < 12) { printk(KERN_ERR PFX "(chassis) IPMI get device id info too," " short, was %d bytes, needed %d bytes\n", halt_recv_msg.msg.data_len, 12); goto out_err; } mfg_id = (halt_recv_msg.msg.data[7] | (halt_recv_msg.msg.data[8] << 8) | (halt_recv_msg.msg.data[9] << 16)); prod_id = (halt_recv_msg.msg.data[10] | (halt_recv_msg.msg.data[11] << 8)); capabilities = halt_recv_msg.msg.data[6]; ipmi_version = halt_recv_msg.msg.data[5]; /* Scan for a poweroff method */ for (i = 0; i < NUM_PO_FUNCS; i++) { if (poweroff_functions[i].detect(ipmi_user)) goto found; } out_err: printk(KERN_ERR PFX "Unable to find a poweroff function that" " will work, giving up\n"); ipmi_destroy_user(ipmi_user); return; found: printk(KERN_INFO PFX "Found a %s style poweroff function\n", poweroff_functions[i].platform_type); specific_poweroff_func = poweroff_functions[i].poweroff_func; old_poweroff_func = pm_power_off; pm_power_off = ipmi_poweroff_function; ready = 1; } static void ipmi_po_smi_gone(int if_num) { if (!ready) return; if (ipmi_ifnum != if_num) return; ready = 0; ipmi_destroy_user(ipmi_user); pm_power_off = old_poweroff_func; } static struct ipmi_smi_watcher smi_watcher = { .owner = THIS_MODULE, .new_smi = ipmi_po_new_smi, .smi_gone = ipmi_po_smi_gone }; #ifdef CONFIG_PROC_FS #include static struct ctl_table ipmi_table[] = { { .procname = "poweroff_powercycle", .data = &poweroff_powercycle, .maxlen = sizeof(poweroff_powercycle), .mode = 0644, .proc_handler = proc_dointvec }, { } }; static struct ctl_table ipmi_dir_table[] = { { .procname = "ipmi", .mode = 0555, .child = ipmi_table }, { } }; static struct ctl_table ipmi_root_table[] = { { .procname = "dev", .mode = 0555, .child = ipmi_dir_table }, { } }; static struct ctl_table_header *ipmi_table_header; #endif /* CONFIG_PROC_FS */ /* * Startup and shutdown functions. */ static int __init ipmi_poweroff_init(void) { int rv; printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" " IPMI Powerdown via sys_reboot.\n"); if (poweroff_powercycle) printk(KERN_INFO PFX "Power cycle is enabled.\n"); #ifdef CONFIG_PROC_FS ipmi_table_header = register_sysctl_table(ipmi_root_table); if (!ipmi_table_header) { printk(KERN_ERR PFX "Unable to register powercycle sysctl\n"); rv = -ENOMEM; goto out_err; } #endif rv = ipmi_smi_watcher_register(&smi_watcher); #ifdef CONFIG_PROC_FS if (rv) { unregister_sysctl_table(ipmi_table_header); printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv); goto out_err; } out_err: #endif return rv; } #ifdef MODULE static void __exit ipmi_poweroff_cleanup(void) { int rv; #ifdef CONFIG_PROC_FS unregister_sysctl_table(ipmi_table_header); #endif ipmi_smi_watcher_unregister(&smi_watcher); if (ready) { rv = ipmi_destroy_user(ipmi_user); if (rv) printk(KERN_ERR PFX "could not cleanup the IPMI" " user: 0x%x\n", rv); pm_power_off = old_poweroff_func; } } module_exit(ipmi_poweroff_cleanup); #endif module_init(ipmi_poweroff_init); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard "); MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot");