// SPDX-License-Identifier: GPL-2.0-or-later /* * * Generic Bluetooth USB driver * * Copyright (C) 2005-2008 Marcel Holtmann */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "btintel.h" #include "btbcm.h" #include "btrtl.h" #include "btmtk.h" #define VERSION "0.8" static bool disable_scofix; static bool force_scofix; static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND); static bool enable_poll_sync = IS_ENABLED(CONFIG_BT_HCIBTUSB_POLL_SYNC); static bool reset = true; static struct usb_driver btusb_driver; #define BTUSB_IGNORE BIT(0) #define BTUSB_DIGIANSWER BIT(1) #define BTUSB_CSR BIT(2) #define BTUSB_SNIFFER BIT(3) #define BTUSB_BCM92035 BIT(4) #define BTUSB_BROKEN_ISOC BIT(5) #define BTUSB_WRONG_SCO_MTU BIT(6) #define BTUSB_ATH3012 BIT(7) #define BTUSB_INTEL_COMBINED BIT(8) #define BTUSB_INTEL_BOOT BIT(9) #define BTUSB_BCM_PATCHRAM BIT(10) #define BTUSB_MARVELL BIT(11) #define BTUSB_SWAVE BIT(12) #define BTUSB_AMP BIT(13) #define BTUSB_QCA_ROME BIT(14) #define BTUSB_BCM_APPLE BIT(15) #define BTUSB_REALTEK BIT(16) #define BTUSB_BCM2045 BIT(17) #define BTUSB_IFNUM_2 BIT(18) #define BTUSB_CW6622 BIT(19) #define BTUSB_MEDIATEK BIT(20) #define BTUSB_WIDEBAND_SPEECH BIT(21) #define BTUSB_INVALID_LE_STATES BIT(22) #define BTUSB_QCA_WCN6855 BIT(23) #define BTUSB_INTEL_BROKEN_SHUTDOWN_LED BIT(24) #define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25) #define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26) #define BTUSB_ACTIONS_SEMI BIT(27) static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, /* Generic Bluetooth AMP device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP }, /* Generic Bluetooth USB interface */ { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) }, /* Apple-specific (Broadcom) devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 }, /* MediaTek MT76x0E */ { USB_DEVICE(0x0e8d, 0x763f) }, /* Broadcom SoftSailing reporting vendor specific */ { USB_DEVICE(0x0a5c, 0x21e1) }, /* Apple MacBookPro 7,1 */ { USB_DEVICE(0x05ac, 0x8213) }, /* Apple iMac11,1 */ { USB_DEVICE(0x05ac, 0x8215) }, /* Apple MacBookPro6,2 */ { USB_DEVICE(0x05ac, 0x8218) }, /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_DEVICE(0x05ac, 0x821b) }, /* Apple MacBookAir4,1 */ { USB_DEVICE(0x05ac, 0x821f) }, /* Apple MacBookPro8,2 */ { USB_DEVICE(0x05ac, 0x821a) }, /* Apple MacMini5,1 */ { USB_DEVICE(0x05ac, 0x8281) }, /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE }, /* Bluetooth Ultraport Module from IBM */ { USB_DEVICE(0x04bf, 0x030a) }, /* ALPS Modules with non-standard id */ { USB_DEVICE(0x044e, 0x3001) }, { USB_DEVICE(0x044e, 0x3002) }, /* Ericsson with non-standard id */ { USB_DEVICE(0x0bdb, 0x1002) }, /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702B0 (Dynex/Insignia) */ { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM }, /* Broadcom BCM43142A0 (Foxconn/Lenovo) */ { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Broadcom BCM920703 (HTC Vive) */ { USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Foxconn - Hon Hai */ { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Lite-On Technology - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* ASUSTek Computer - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Belkin F8065bf - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* IMC Networks - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Dell Computer - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Toshiba Corp - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Intel Bluetooth USB Bootloader (RAM module) */ { USB_DEVICE(0x8087, 0x0a5a), .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, btusb_table); static const struct usb_device_id quirks_table[] = { /* CSR BlueCore devices */ { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, /* Broadcom BCM2033 without firmware */ { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, /* Broadcom BCM2045 devices */ { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 }, /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, /* Atheros 3012 with sflash firmware */ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, /* QCA ROME chipset */ { USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | BTUSB_WIDEBAND_SPEECH }, /* QCA WCN6855 chipset */ { USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9108), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9109), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9208), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9209), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9308), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9408), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9508), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9509), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9608), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9609), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x10ab, 0x9f09), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3022), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0c9), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0ca), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0cb), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0ce), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0de), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0df), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0e1), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0ea), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0ec), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3023), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3024), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3a22), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3a24), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3a26), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3a27), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, /* QCA WCN785x chipset */ { USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 | BTUSB_WIDEBAND_SPEECH }, /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Broadcom BCM2045 */ { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, /* IBM/Lenovo ThinkPad with Broadcom chip */ { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, /* HP laptop with Broadcom chip */ { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Dell laptop with Broadcom chip */ { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Dell Wireless 370 and 410 devices */ { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Belkin F8T012 and F8T013 devices */ { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Asus WL-BTD202 device */ { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Kensington Bluetooth USB adapter */ { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, /* RTX Telecom based adapters with buggy SCO support */ { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, /* CONWISE Technology based adapters with buggy SCO support */ { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622}, /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE }, /* Digianswer devices */ { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, /* CSR BlueCore Bluetooth Sniffer */ { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, /* Frontline ComProbe Bluetooth Sniffer */ { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, /* Marvell Bluetooth devices */ { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, /* Intel Bluetooth devices */ { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0035), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0036), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_INTEL_NO_WBS_SUPPORT | BTUSB_INTEL_BROKEN_INITIAL_NCMD | BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_INTEL_NO_WBS_SUPPORT | BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED }, /* Other Intel Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE }, /* Realtek 8821CE Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8822CE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8822CU Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cb8, 0xc549), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852CE Bluetooth devices */ { USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cb8, 0xc558), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3587), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x4853), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3591), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852BT/8852BE-VT Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek 8922AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Realtek Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), .driver_info = BTUSB_REALTEK }, /* MediaTek Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* Additional MediaTek MT7615E Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK}, /* Additional MediaTek MT7663 Bluetooth devices */ { USB_DEVICE(0x043e, 0x310c), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3801), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* Additional MediaTek MT7668 Bluetooth devices */ { USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* Additional MediaTek MT7921 Bluetooth devices */ { USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0e0), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0e8d, 0x0608), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3578), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3583), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3606), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922 Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* MediaTek MT7922A Bluetooth devices */ { USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0e2), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0e4), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0f1), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x3804), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04ca, 0x38e4), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3614), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3615), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x35f5, 0x7922), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* Additional MediaTek MT7925 Bluetooth devices */ { USB_DEVICE(0x0489, 0xe113), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe118), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe11e), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3604), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3608), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, /* Additional Realtek 8723AE Bluetooth devices */ { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8723BE Bluetooth devices */ { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x04f2, 0xb49f), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8723BU Bluetooth devices */ { USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8723DE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8761BUV Bluetooth devices */ { USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x8771), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x6655, 0x8771), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x7392, 0xc611), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x2b89, 0x8761), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Additional Realtek 8821AE Bluetooth devices */ { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8822BE Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK }, /* Additional Realtek 8822CE Bluetooth devices */ { USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3553), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3555), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x2ff8, 0x3051), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x1358, 0xc123), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, /* Actions Semiconductor ATS2851 based devices */ { USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI }, /* Silicon Wave based devices */ { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE }, { } /* Terminating entry */ }; /* The Bluetooth USB module build into some devices needs to be reset on resume, * this is a problem with the platform (likely shutting off all power) not with * the module itself. So we use a DMI list to match known broken platforms. */ static const struct dmi_system_id btusb_needs_reset_resume_table[] = { { /* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"), }, }, { /* Dell XPS 9360 (QCA ROME device 0cf3:e300) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"), }, }, { /* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"), }, }, {} }; struct qca_dump_info { /* fields for dump collection */ u16 id_vendor; u16 id_product; u32 fw_version; u32 controller_id; u32 ram_dump_size; u16 ram_dump_seqno; }; #define BTUSB_MAX_ISOC_FRAMES 10 #define BTUSB_INTR_RUNNING 0 #define BTUSB_BULK_RUNNING 1 #define BTUSB_ISOC_RUNNING 2 #define BTUSB_SUSPENDING 3 #define BTUSB_DID_ISO_RESUME 4 #define BTUSB_BOOTLOADER 5 #define BTUSB_DOWNLOADING 6 #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 #define BTUSB_DIAG_RUNNING 10 #define BTUSB_OOB_WAKE_ENABLED 11 #define BTUSB_HW_RESET_ACTIVE 12 #define BTUSB_TX_WAIT_VND_EVT 13 #define BTUSB_WAKEUP_AUTOSUSPEND 14 #define BTUSB_USE_ALT3_FOR_WBS 15 #define BTUSB_ALT6_CONTINUOUS_TX 16 #define BTUSB_HW_SSR_ACTIVE 17 struct btusb_data { struct hci_dev *hdev; struct usb_device *udev; struct usb_interface *intf; struct usb_interface *isoc; struct usb_interface *diag; unsigned isoc_ifnum; unsigned long flags; bool poll_sync; int intr_interval; struct work_struct work; struct work_struct waker; struct delayed_work rx_work; struct sk_buff_head acl_q; struct usb_anchor deferred; struct usb_anchor tx_anchor; int tx_in_flight; spinlock_t txlock; struct usb_anchor intr_anchor; struct usb_anchor bulk_anchor; struct usb_anchor isoc_anchor; struct usb_anchor diag_anchor; struct usb_anchor ctrl_anchor; spinlock_t rxlock; struct sk_buff *evt_skb; struct sk_buff *acl_skb; struct sk_buff *sco_skb; struct usb_endpoint_descriptor *intr_ep; struct usb_endpoint_descriptor *bulk_tx_ep; struct usb_endpoint_descriptor *bulk_rx_ep; struct usb_endpoint_descriptor *isoc_tx_ep; struct usb_endpoint_descriptor *isoc_rx_ep; struct usb_endpoint_descriptor *diag_tx_ep; struct usb_endpoint_descriptor *diag_rx_ep; struct gpio_desc *reset_gpio; __u8 cmdreq_type; __u8 cmdreq; unsigned int sco_num; unsigned int air_mode; bool usb_alt6_packet_flow; int isoc_altsetting; int suspend_count; int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb); int (*recv_acl)(struct hci_dev *hdev, struct sk_buff *skb); int (*recv_bulk)(struct btusb_data *data, void *buffer, int count); int (*setup_on_usb)(struct hci_dev *hdev); int (*suspend)(struct hci_dev *hdev); int (*resume)(struct hci_dev *hdev); int oob_wake_irq; /* irq for out-of-band wake-on-bt */ unsigned cmd_timeout_cnt; struct qca_dump_info qca_dump; }; static void btusb_reset(struct hci_dev *hdev) { struct btusb_data *data; int err; if (hdev->reset) { hdev->reset(hdev); return; } data = hci_get_drvdata(hdev); /* This is not an unbalanced PM reference since the device will reset */ err = usb_autopm_get_interface(data->intf); if (err) { bt_dev_err(hdev, "Failed usb_autopm_get_interface: %d", err); return; } bt_dev_err(hdev, "Resetting usb device."); usb_queue_reset_device(data->intf); } static void btusb_intel_cmd_timeout(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct gpio_desc *reset_gpio = data->reset_gpio; struct btintel_data *intel_data = hci_get_priv(hdev); if (++data->cmd_timeout_cnt < 5) return; if (intel_data->acpi_reset_method) { if (test_and_set_bit(INTEL_ACPI_RESET_ACTIVE, intel_data->flags)) { bt_dev_err(hdev, "acpi: last reset failed ? Not resetting again"); return; } bt_dev_err(hdev, "Initiating acpi reset method"); /* If ACPI reset method fails, lets try with legacy GPIO * toggling */ if (!intel_data->acpi_reset_method(hdev)) { return; } } if (!reset_gpio) { btusb_reset(hdev); return; } /* * Toggle the hard reset line if the platform provides one. The reset * is going to yank the device off the USB and then replug. So doing * once is enough. The cleanup is handled correctly on the way out * (standard USB disconnect), and the new device is detected cleanly * and bound to the driver again like it should be. */ if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { bt_dev_err(hdev, "last reset failed? Not resetting again"); return; } bt_dev_err(hdev, "Initiating HW reset via gpio"); gpiod_set_value_cansleep(reset_gpio, 1); msleep(100); gpiod_set_value_cansleep(reset_gpio, 0); } #define RTK_DEVCOREDUMP_CODE_MEMDUMP 0x01 #define RTK_DEVCOREDUMP_CODE_HW_ERR 0x02 #define RTK_DEVCOREDUMP_CODE_CMD_TIMEOUT 0x03 #define RTK_SUB_EVENT_CODE_COREDUMP 0x34 struct rtk_dev_coredump_hdr { u8 type; u8 code; u8 reserved[2]; } __packed; static inline void btusb_rtl_alloc_devcoredump(struct hci_dev *hdev, struct rtk_dev_coredump_hdr *hdr, u8 *buf, u32 len) { struct sk_buff *skb; skb = alloc_skb(len + sizeof(*hdr), GFP_ATOMIC); if (!skb) return; skb_put_data(skb, hdr, sizeof(*hdr)); if (len) skb_put_data(skb, buf, len); if (!hci_devcd_init(hdev, skb->len)) { hci_devcd_append(hdev, skb); hci_devcd_complete(hdev); } else { bt_dev_err(hdev, "RTL: Failed to generate devcoredump"); kfree_skb(skb); } } static void btusb_rtl_cmd_timeout(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct gpio_desc *reset_gpio = data->reset_gpio; struct rtk_dev_coredump_hdr hdr = { .type = RTK_DEVCOREDUMP_CODE_CMD_TIMEOUT, }; btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0); if (++data->cmd_timeout_cnt < 5) return; if (!reset_gpio) { btusb_reset(hdev); return; } /* Toggle the hard reset line. The Realtek device is going to * yank itself off the USB and then replug. The cleanup is handled * correctly on the way out (standard USB disconnect), and the new * device is detected cleanly and bound to the driver again like * it should be. */ if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { bt_dev_err(hdev, "last reset failed? Not resetting again"); return; } bt_dev_err(hdev, "Reset Realtek device via gpio"); gpiod_set_value_cansleep(reset_gpio, 1); msleep(200); gpiod_set_value_cansleep(reset_gpio, 0); } static void btusb_rtl_hw_error(struct hci_dev *hdev, u8 code) { struct rtk_dev_coredump_hdr hdr = { .type = RTK_DEVCOREDUMP_CODE_HW_ERR, .code = code, }; bt_dev_err(hdev, "RTL: hw err, trigger devcoredump (%d)", code); btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0); } static void btusb_qca_cmd_timeout(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct gpio_desc *reset_gpio = data->reset_gpio; if (test_bit(BTUSB_HW_SSR_ACTIVE, &data->flags)) { bt_dev_info(hdev, "Ramdump in progress, defer cmd_timeout"); return; } if (++data->cmd_timeout_cnt < 5) return; if (reset_gpio) { bt_dev_err(hdev, "Reset qca device via bt_en gpio"); /* Toggle the hard reset line. The qca bt device is going to * yank itself off the USB and then replug. The cleanup is handled * correctly on the way out (standard USB disconnect), and the new * device is detected cleanly and bound to the driver again like * it should be. */ if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { bt_dev_err(hdev, "last reset failed? Not resetting again"); return; } gpiod_set_value_cansleep(reset_gpio, 0); msleep(200); gpiod_set_value_cansleep(reset_gpio, 1); return; } btusb_reset(hdev); } static inline void btusb_free_frags(struct btusb_data *data) { unsigned long flags; spin_lock_irqsave(&data->rxlock, flags); dev_kfree_skb_irq(data->evt_skb); data->evt_skb = NULL; dev_kfree_skb_irq(data->acl_skb); data->acl_skb = NULL; dev_kfree_skb_irq(data->sco_skb); data->sco_skb = NULL; spin_unlock_irqrestore(&data->rxlock, flags); } static int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb) { if (data->intr_interval) { /* Trigger dequeue immediatelly if an event is received */ schedule_delayed_work(&data->rx_work, 0); } return data->recv_event(data->hdev, skb); } static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; unsigned long flags; int err = 0; spin_lock_irqsave(&data->rxlock, flags); skb = data->evt_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } hci_skb_pkt_type(skb) = HCI_EVENT_PKT; hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE; } len = min_t(uint, hci_skb_expect(skb), count); skb_put_data(skb, buffer, len); count -= len; buffer += len; hci_skb_expect(skb) -= len; if (skb->len == HCI_EVENT_HDR_SIZE) { /* Complete event header */ hci_skb_expect(skb) = hci_event_hdr(skb)->plen; if (skb_tailroom(skb) < hci_skb_expect(skb)) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (!hci_skb_expect(skb)) { /* Complete frame */ btusb_recv_event(data, skb); skb = NULL; } } data->evt_skb = skb; spin_unlock_irqrestore(&data->rxlock, flags); return err; } static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb) { /* Only queue ACL packet if intr_interval is set as it means * force_poll_sync has been enabled. */ if (!data->intr_interval) return data->recv_acl(data->hdev, skb); skb_queue_tail(&data->acl_q, skb); schedule_delayed_work(&data->rx_work, data->intr_interval); return 0; } static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; unsigned long flags; int err = 0; spin_lock_irqsave(&data->rxlock, flags); skb = data->acl_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT; hci_skb_expect(skb) = HCI_ACL_HDR_SIZE; } len = min_t(uint, hci_skb_expect(skb), count); skb_put_data(skb, buffer, len); count -= len; buffer += len; hci_skb_expect(skb) -= len; if (skb->len == HCI_ACL_HDR_SIZE) { __le16 dlen = hci_acl_hdr(skb)->dlen; /* Complete ACL header */ hci_skb_expect(skb) = __le16_to_cpu(dlen); if (skb_tailroom(skb) < hci_skb_expect(skb)) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (!hci_skb_expect(skb)) { /* Complete frame */ btusb_recv_acl(data, skb); skb = NULL; } } data->acl_skb = skb; spin_unlock_irqrestore(&data->rxlock, flags); return err; } static bool btusb_validate_sco_handle(struct hci_dev *hdev, struct hci_sco_hdr *hdr) { __u16 handle; if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) // Can't validate, userspace controls everything. return true; /* * USB isochronous transfers are not designed to be reliable and may * lose fragments. When this happens, the next first fragment * encountered might actually be a continuation fragment. * Validate the handle to detect it and drop it, or else the upper * layer will get garbage for a while. */ handle = hci_handle(__le16_to_cpu(hdr->handle)); switch (hci_conn_lookup_type(hdev, handle)) { case SCO_LINK: case ESCO_LINK: return true; default: return false; } } static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; unsigned long flags; int err = 0; spin_lock_irqsave(&data->rxlock, flags); skb = data->sco_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } hci_skb_pkt_type(skb) = HCI_SCODATA_PKT; hci_skb_expect(skb) = HCI_SCO_HDR_SIZE; } len = min_t(uint, hci_skb_expect(skb), count); skb_put_data(skb, buffer, len); count -= len; buffer += len; hci_skb_expect(skb) -= len; if (skb->len == HCI_SCO_HDR_SIZE) { /* Complete SCO header */ struct hci_sco_hdr *hdr = hci_sco_hdr(skb); hci_skb_expect(skb) = hdr->dlen; if (skb_tailroom(skb) < hci_skb_expect(skb) || !btusb_validate_sco_handle(data->hdev, hdr)) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (!hci_skb_expect(skb)) { /* Complete frame */ hci_recv_frame(data->hdev, skb); skb = NULL; } } data->sco_skb = skb; spin_unlock_irqrestore(&data->rxlock, flags); return err; } static void btusb_intr_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { hdev->stat.byte_rx += urb->actual_length; if (btusb_recv_intr(data, urb->transfer_buffer, urb->actual_length) < 0) { bt_dev_err(hdev, "corrupted event packet"); hdev->stat.err_rx++; } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) return; usb_mark_last_busy(data->udev); usb_anchor_urb(urb, &data->intr_anchor); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p failed to resubmit (%d)", urb, -err); if (err != -EPERM) hci_cmd_sync_cancel(hdev, -err); usb_unanchor_urb(urb); } } static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size; BT_DBG("%s", hdev->name); if (!data->intr_ep) return -ENODEV; urb = usb_alloc_urb(0, mem_flags); if (!urb) return -ENOMEM; if (le16_to_cpu(data->udev->descriptor.idVendor) == 0x0a12 && le16_to_cpu(data->udev->descriptor.idProduct) == 0x0001) /* Fake CSR devices don't seem to support sort-transter */ size = le16_to_cpu(data->intr_ep->wMaxPacketSize); else /* Use maximum HCI Event size so the USB stack handles * ZPL/short-transfer automatically. */ size = HCI_MAX_EVENT_SIZE; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_intr_complete, hdev, data->intr_ep->bInterval); urb->transfer_flags |= URB_FREE_BUFFER; usb_anchor_urb(urb, &data->intr_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); if (err != -EPERM) hci_cmd_sync_cancel(hdev, -err); usb_unanchor_urb(urb); } /* Only initialize intr_interval if URB poll sync is enabled */ if (!data->poll_sync) goto done; /* The units are frames (milliseconds) for full and low speed devices, * and microframes (1/8 millisecond) for highspeed and SuperSpeed * devices. * * This is done once on open/resume so it shouldn't change even if * force_poll_sync changes. */ switch (urb->dev->speed) { case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: /* units are 125us */ data->intr_interval = usecs_to_jiffies(urb->interval * 125); break; default: data->intr_interval = msecs_to_jiffies(urb->interval); break; } done: usb_free_urb(urb); return err; } static void btusb_bulk_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { hdev->stat.byte_rx += urb->actual_length; if (data->recv_bulk(data, urb->transfer_buffer, urb->actual_length) < 0) { bt_dev_err(hdev, "corrupted ACL packet"); hdev->stat.err_rx++; } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) return; usb_anchor_urb(urb, &data->bulk_anchor); usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p failed to resubmit (%d)", urb, -err); usb_unanchor_urb(urb); } } static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size = HCI_MAX_FRAME_SIZE; BT_DBG("%s", hdev->name); if (!data->bulk_rx_ep) return -ENODEV; urb = usb_alloc_urb(0, mem_flags); if (!urb) return -ENOMEM; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, btusb_bulk_complete, hdev); urb->transfer_flags |= URB_FREE_BUFFER; usb_mark_last_busy(data->udev); usb_anchor_urb(urb, &data->bulk_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_isoc_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int i, err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { for (i = 0; i < urb->number_of_packets; i++) { unsigned int offset = urb->iso_frame_desc[i].offset; unsigned int length = urb->iso_frame_desc[i].actual_length; if (urb->iso_frame_desc[i].status) continue; hdev->stat.byte_rx += length; if (btusb_recv_isoc(data, urb->transfer_buffer + offset, length) < 0) { bt_dev_err(hdev, "corrupted SCO packet"); hdev->stat.err_rx++; } } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) return; usb_anchor_urb(urb, &data->isoc_anchor); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p failed to resubmit (%d)", urb, -err); usb_unanchor_urb(urb); } } static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len, int mtu, struct btusb_data *data) { int i = 0, offset = 0; unsigned int interval; BT_DBG("len %d mtu %d", len, mtu); /* For mSBC ALT 6 settings some chips need to transmit the data * continuously without the zero length of USB packets. */ if (test_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags)) goto ignore_usb_alt6_packet_flow; /* For mSBC ALT 6 setting the host will send the packet at continuous * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets. * To maintain the rate we send 63bytes of usb packets alternatively for * 7ms and 8ms to maintain the rate as 7.5ms. */ if (data->usb_alt6_packet_flow) { interval = 7; data->usb_alt6_packet_flow = false; } else { interval = 6; data->usb_alt6_packet_flow = true; } for (i = 0; i < interval; i++) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = offset; } ignore_usb_alt6_packet_flow: if (len && i < BTUSB_MAX_ISOC_FRAMES) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = len; i++; } urb->number_of_packets = i; } static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) { int i, offset = 0; BT_DBG("len %d mtu %d", len, mtu); for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; i++, offset += mtu, len -= mtu) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = mtu; } if (len && i < BTUSB_MAX_ISOC_FRAMES) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = len; i++; } urb->number_of_packets = i; } static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size; BT_DBG("%s", hdev->name); if (!data->isoc_rx_ep) return -ENODEV; urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); if (!urb) return -ENOMEM; size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * BTUSB_MAX_ISOC_FRAMES; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete, hdev, data->isoc_rx_ep->bInterval); urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; __fill_isoc_descriptor(urb, size, le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); usb_anchor_urb(urb, &data->isoc_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_diag_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (urb->status == 0) { struct sk_buff *skb; skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC); if (skb) { skb_put_data(skb, urb->transfer_buffer, urb->actual_length); hci_recv_diag(hdev, skb); } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags)) return; usb_anchor_urb(urb, &data->diag_anchor); usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p failed to resubmit (%d)", urb, -err); usb_unanchor_urb(urb); } } static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size = HCI_MAX_FRAME_SIZE; BT_DBG("%s", hdev->name); if (!data->diag_rx_ep) return -ENODEV; urb = usb_alloc_urb(0, mem_flags); if (!urb) return -ENOMEM; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, btusb_diag_complete, hdev); urb->transfer_flags |= URB_FREE_BUFFER; usb_mark_last_busy(data->udev); usb_anchor_urb(urb, &data->diag_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_tx_complete(struct urb *urb) { struct sk_buff *skb = urb->context; struct hci_dev *hdev = (struct hci_dev *)skb->dev; struct btusb_data *data = hci_get_drvdata(hdev); unsigned long flags; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (!urb->status) { hdev->stat.byte_tx += urb->transfer_buffer_length; } else { if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) hci_cmd_sync_cancel(hdev, -urb->status); hdev->stat.err_tx++; } done: spin_lock_irqsave(&data->txlock, flags); data->tx_in_flight--; spin_unlock_irqrestore(&data->txlock, flags); kfree(urb->setup_packet); kfree_skb(skb); } static void btusb_isoc_tx_complete(struct urb *urb) { struct sk_buff *skb = urb->context; struct hci_dev *hdev = (struct hci_dev *)skb->dev; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (!urb->status) hdev->stat.byte_tx += urb->transfer_buffer_length; else hdev->stat.err_tx++; done: kfree(urb->setup_packet); kfree_skb(skb); } static int btusb_open(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); err = usb_autopm_get_interface(data->intf); if (err < 0) return err; /* Patching USB firmware files prior to starting any URBs of HCI path * It is more safe to use USB bulk channel for downloading USB patch */ if (data->setup_on_usb) { err = data->setup_on_usb(hdev); if (err < 0) goto setup_fail; } data->intf->needs_remote_wakeup = 1; if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) goto done; err = btusb_submit_intr_urb(hdev, GFP_KERNEL); if (err < 0) goto failed; err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); if (err < 0) { usb_kill_anchored_urbs(&data->intr_anchor); goto failed; } set_bit(BTUSB_BULK_RUNNING, &data->flags); btusb_submit_bulk_urb(hdev, GFP_KERNEL); if (data->diag) { if (!btusb_submit_diag_urb(hdev, GFP_KERNEL)) set_bit(BTUSB_DIAG_RUNNING, &data->flags); } done: usb_autopm_put_interface(data->intf); return 0; failed: clear_bit(BTUSB_INTR_RUNNING, &data->flags); setup_fail: usb_autopm_put_interface(data->intf); return err; } static void btusb_stop_traffic(struct btusb_data *data) { usb_kill_anchored_urbs(&data->intr_anchor); usb_kill_anchored_urbs(&data->bulk_anchor); usb_kill_anchored_urbs(&data->isoc_anchor); usb_kill_anchored_urbs(&data->diag_anchor); usb_kill_anchored_urbs(&data->ctrl_anchor); } static int btusb_close(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); cancel_delayed_work(&data->rx_work); cancel_work_sync(&data->work); cancel_work_sync(&data->waker); skb_queue_purge(&data->acl_q); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); clear_bit(BTUSB_INTR_RUNNING, &data->flags); clear_bit(BTUSB_DIAG_RUNNING, &data->flags); btusb_stop_traffic(data); btusb_free_frags(data); err = usb_autopm_get_interface(data->intf); if (err < 0) goto failed; data->intf->needs_remote_wakeup = 0; /* Enable remote wake up for auto-suspend */ if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) data->intf->needs_remote_wakeup = 1; usb_autopm_put_interface(data->intf); failed: usb_scuttle_anchored_urbs(&data->deferred); return 0; } static int btusb_flush(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s", hdev->name); cancel_delayed_work(&data->rx_work); skb_queue_purge(&data->acl_q); usb_kill_anchored_urbs(&data->tx_anchor); btusb_free_frags(data); return 0; } static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_ctrlrequest *dr; struct urb *urb; unsigned int pipe; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); dr = kmalloc(sizeof(*dr), GFP_KERNEL); if (!dr) { usb_free_urb(urb); return ERR_PTR(-ENOMEM); } dr->bRequestType = data->cmdreq_type; dr->bRequest = data->cmdreq; dr->wIndex = 0; dr->wValue = 0; dr->wLength = __cpu_to_le16(skb->len); pipe = usb_sndctrlpipe(data->udev, 0x00); usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, skb->data, skb->len, btusb_tx_complete, skb); skb->dev = (void *)hdev; return urb; } static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned int pipe; if (!data->bulk_tx_ep) return ERR_PTR(-ENODEV); urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_tx_complete, skb); skb->dev = (void *)hdev; return urb; } static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned int pipe; if (!data->isoc_tx_ep) return ERR_PTR(-ENODEV); urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_isoc_tx_complete, skb, data->isoc_tx_ep->bInterval); urb->transfer_flags = URB_ISO_ASAP; if (data->isoc_altsetting == 6) __fill_isoc_descriptor_msbc(urb, skb->len, le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize), data); else __fill_isoc_descriptor(urb, skb->len, le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); skb->dev = (void *)hdev; return urb; } static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb) { struct btusb_data *data = hci_get_drvdata(hdev); int err; usb_anchor_urb(urb, &data->tx_anchor); err = usb_submit_urb(urb, GFP_KERNEL); if (err < 0) { if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); kfree(urb->setup_packet); usb_unanchor_urb(urb); } else { usb_mark_last_busy(data->udev); } usb_free_urb(urb); return err; } static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb) { struct btusb_data *data = hci_get_drvdata(hdev); unsigned long flags; bool suspending; spin_lock_irqsave(&data->txlock, flags); suspending = test_bit(BTUSB_SUSPENDING, &data->flags); if (!suspending) data->tx_in_flight++; spin_unlock_irqrestore(&data->txlock, flags); if (!suspending) return submit_tx_urb(hdev, urb); usb_anchor_urb(urb, &data->deferred); schedule_work(&data->waker); usb_free_urb(urb); return 0; } static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { struct urb *urb; BT_DBG("%s", hdev->name); switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: urb = alloc_ctrl_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.cmd_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_ACLDATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.acl_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_SCODATA_PKT: if (hci_conn_num(hdev, SCO_LINK) < 1) return -ENODEV; urb = alloc_isoc_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.sco_tx++; return submit_tx_urb(hdev, urb); case HCI_ISODATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); return submit_or_queue_tx_urb(hdev, urb); } return -EILSEQ; } static void btusb_notify(struct hci_dev *hdev, unsigned int evt) { struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s evt %d", hdev->name, evt); if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { data->sco_num = hci_conn_num(hdev, SCO_LINK); data->air_mode = evt; schedule_work(&data->work); } } static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_interface *intf = data->isoc; struct usb_endpoint_descriptor *ep_desc; int i, err; if (!data->isoc) return -ENODEV; err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting); if (err < 0) { bt_dev_err(hdev, "setting interface failed (%d)", -err); return err; } data->isoc_altsetting = altsetting; data->isoc_tx_ep = NULL; data->isoc_rx_ep = NULL; for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { ep_desc = &intf->cur_altsetting->endpoint[i].desc; if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { data->isoc_tx_ep = ep_desc; continue; } if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { data->isoc_rx_ep = ep_desc; continue; } } if (!data->isoc_tx_ep || !data->isoc_rx_ep) { bt_dev_err(hdev, "invalid SCO descriptors"); return -ENODEV; } return 0; } static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts) { struct btusb_data *data = hci_get_drvdata(hdev); int err; if (data->isoc_altsetting != new_alts) { unsigned long flags; clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); /* When isochronous alternate setting needs to be * changed, because SCO connection has been added * or removed, a packet fragment may be left in the * reassembling state. This could lead to wrongly * assembled fragments. * * Clear outstanding fragment when selecting a new * alternate setting. */ spin_lock_irqsave(&data->rxlock, flags); dev_kfree_skb_irq(data->sco_skb); data->sco_skb = NULL; spin_unlock_irqrestore(&data->rxlock, flags); err = __set_isoc_interface(hdev, new_alts); if (err < 0) return err; } if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) clear_bit(BTUSB_ISOC_RUNNING, &data->flags); else btusb_submit_isoc_urb(hdev, GFP_KERNEL); } return 0; } static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data, int alt) { struct usb_interface *intf = data->isoc; int i; BT_DBG("Looking for Alt no :%d", alt); if (!intf) return NULL; for (i = 0; i < intf->num_altsetting; i++) { if (intf->altsetting[i].desc.bAlternateSetting == alt) return &intf->altsetting[i]; } return NULL; } static void btusb_work(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, work); struct hci_dev *hdev = data->hdev; int new_alts = 0; int err; if (data->sco_num > 0) { if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); if (err < 0) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); return; } set_bit(BTUSB_DID_ISO_RESUME, &data->flags); } if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) { if (hdev->voice_setting & 0x0020) { static const int alts[3] = { 2, 4, 5 }; new_alts = alts[data->sco_num - 1]; } else { new_alts = data->sco_num; } } else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) { /* Bluetooth USB spec recommends alt 6 (63 bytes), but * many adapters do not support it. Alt 1 appears to * work for all adapters that do not have alt 6, and * which work with WBS at all. Some devices prefer * alt 3 (HCI payload >= 60 Bytes let air packet * data satisfy 60 bytes), requiring * MTU >= 3 (packets) * 25 (size) - 3 (headers) = 72 * see also Core spec 5, vol 4, B 2.1.1 & Table 2.1. */ if (btusb_find_altsetting(data, 6)) new_alts = 6; else if (btusb_find_altsetting(data, 3) && hdev->sco_mtu >= 72 && test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags)) new_alts = 3; else new_alts = 1; } if (btusb_switch_alt_setting(hdev, new_alts) < 0) bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts); } else { usb_kill_anchored_urbs(&data->isoc_anchor); if (test_and_clear_bit(BTUSB_ISOC_RUNNING, &data->flags)) __set_isoc_interface(hdev, 0); if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); } } static void btusb_waker(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, waker); int err; err = usb_autopm_get_interface(data->intf); if (err < 0) return; usb_autopm_put_interface(data->intf); } static void btusb_rx_work(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, rx_work.work); struct sk_buff *skb; /* Dequeue ACL data received during the interval */ while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); } static int btusb_setup_bcm92035(struct hci_dev *hdev) { struct sk_buff *skb; u8 val = 0x00; BT_DBG("%s", hdev->name); skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb)); else kfree_skb(skb); return 0; } static int btusb_setup_csr(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); u16 bcdDevice = le16_to_cpu(data->udev->descriptor.bcdDevice); struct hci_rp_read_local_version *rp; struct sk_buff *skb; bool is_fake = false; int ret; BT_DBG("%s", hdev->name); skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { int err = PTR_ERR(skb); bt_dev_err(hdev, "CSR: Local version failed (%d)", err); return err; } rp = skb_pull_data(skb, sizeof(*rp)); if (!rp) { bt_dev_err(hdev, "CSR: Local version length mismatch"); kfree_skb(skb); return -EIO; } bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x", rp->hci_ver, le16_to_cpu(rp->hci_rev)); bt_dev_info(hdev, "LMP ver=%u subver=%04x; manufacturer=%u", rp->lmp_ver, le16_to_cpu(rp->lmp_subver), le16_to_cpu(rp->manufacturer)); /* Detect a wide host of Chinese controllers that aren't CSR. * * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 * * The main thing they have in common is that these are really popular low-cost * options that support newer Bluetooth versions but rely on heavy VID/PID * squatting of this poor old Bluetooth 1.1 device. Even sold as such. * * We detect actual CSR devices by checking that the HCI manufacturer code * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and * HCI rev values always match. As they both store the firmware number. */ if (le16_to_cpu(rp->manufacturer) != 10 || le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver)) is_fake = true; /* Known legit CSR firmware build numbers and their supported BT versions: * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e * - 1.2 (0x2) -> 0x04d9, 0x0529 * - 2.0 (0x3) -> 0x07a6, 0x07ad, 0x0c5c * - 2.1 (0x4) -> 0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External) * - 4.0 (0x6) -> 0x1d86, 0x2031, 0x22bb * * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that * support BT 1.1 only; so it's a dead giveaway when some * third-party BT 4.0 dongle reuses it. */ else if (le16_to_cpu(rp->lmp_subver) <= 0x034e && rp->hci_ver > BLUETOOTH_VER_1_1) is_fake = true; else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 && rp->hci_ver > BLUETOOTH_VER_1_2) is_fake = true; else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c && rp->hci_ver > BLUETOOTH_VER_2_0) is_fake = true; else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 && rp->hci_ver > BLUETOOTH_VER_2_1) is_fake = true; else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb && rp->hci_ver > BLUETOOTH_VER_4_0) is_fake = true; /* Other clones which beat all the above checks */ else if (bcdDevice == 0x0134 && le16_to_cpu(rp->lmp_subver) == 0x0c5c && rp->hci_ver == BLUETOOTH_VER_2_0) is_fake = true; if (is_fake) { bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once..."); /* Generally these clones have big discrepancies between * advertised features and what's actually supported. * Probably will need to be expanded in the future; * without these the controller will lock up. */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. */ clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); /* * Special workaround for these BT 4.0 chip clones, and potentially more: * * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012) * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709) * * These controllers are really messed-up. * * 1. Their bulk RX endpoint will never report any data unless * the device was suspended at least once (yes, really). * 2. They will not wakeup when autosuspended and receiving data * on their bulk RX endpoint from e.g. a keyboard or mouse * (IOW remote-wakeup support is broken for the bulk endpoint). * * To fix 1. enable runtime-suspend, force-suspend the * HCI and then wake-it up by disabling runtime-suspend. * * To fix 2. clear the HCI's can_wake flag, this way the HCI * will still be autosuspended when it is not open. * * -- * * Because these are widespread problems we prefer generic solutions; so * apply this initialization quirk to every controller that gets here, * it should be harmless. The alternative is to not work at all. */ pm_runtime_allow(&data->udev->dev); ret = pm_runtime_suspend(&data->udev->dev); if (ret >= 0) msleep(200); else bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); device_set_wakeup_capable(&data->udev->dev, false); /* Re-enable autosuspend if this was requested */ if (enable_autosuspend) usb_enable_autosuspend(data->udev); } kfree_skb(skb); return 0; } static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) { struct sk_buff *skb; struct hci_event_hdr *hdr; struct hci_ev_cmd_complete *evt; skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); if (!skb) return -ENOMEM; hdr = skb_put(skb, sizeof(*hdr)); hdr->evt = HCI_EV_CMD_COMPLETE; hdr->plen = sizeof(*evt) + 1; evt = skb_put(skb, sizeof(*evt)); evt->ncmd = 0x01; evt->opcode = cpu_to_le16(opcode); skb_put_u8(skb, 0x00); hci_skb_pkt_type(skb) = HCI_EVENT_PKT; return hci_recv_frame(hdev, skb); } static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, int count) { struct hci_dev *hdev = data->hdev; /* When the device is in bootloader mode, then it can send * events via the bulk endpoint. These events are treated the * same way as the ones received from the interrupt endpoint. */ if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) return btusb_recv_intr(data, buffer, count); return btusb_recv_bulk(data, buffer, count); } static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) { struct urb *urb; BT_DBG("%s", hdev->name); switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { struct hci_command_hdr *cmd = (void *)skb->data; __u16 opcode = le16_to_cpu(cmd->opcode); /* When in bootloader mode and the command 0xfc09 * is received, it needs to be send down the * bulk endpoint. So allocate a bulk URB instead. */ if (opcode == 0xfc09) urb = alloc_bulk_urb(hdev, skb); else urb = alloc_ctrl_urb(hdev, skb); /* When the 0xfc01 command is issued to boot into * the operational firmware, it will actually not * send a command complete event. To keep the flow * control working inject that event here. */ if (opcode == 0xfc01) inject_cmd_complete(hdev, opcode); } else { urb = alloc_ctrl_urb(hdev, skb); } if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.cmd_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_ACLDATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.acl_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_SCODATA_PKT: if (hci_conn_num(hdev, SCO_LINK) < 1) return -ENODEV; urb = alloc_isoc_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.sco_tx++; return submit_tx_urb(hdev, urb); case HCI_ISODATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); return submit_or_queue_tx_urb(hdev, urb); } return -EILSEQ; } static int btusb_setup_realtek(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); int ret; ret = btrtl_setup_realtek(hdev); if (btrealtek_test_flag(data->hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP)) set_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags); return ret; } static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb) { if (skb->data[0] == HCI_VENDOR_PKT && skb->data[2] == RTK_SUB_EVENT_CODE_COREDUMP) { struct rtk_dev_coredump_hdr hdr = { .code = RTK_DEVCOREDUMP_CODE_MEMDUMP, }; bt_dev_dbg(hdev, "RTL: received coredump vendor evt, len %u", skb->len); btusb_rtl_alloc_devcoredump(hdev, &hdr, skb->data, skb->len); kfree_skb(skb); return 0; } return hci_recv_frame(hdev, skb); } static void btusb_mtk_claim_iso_intf(struct btusb_data *data) { struct btmtk_data *btmtk_data = hci_get_priv(data->hdev); int err; err = usb_driver_claim_interface(&btusb_driver, btmtk_data->isopkt_intf, data); if (err < 0) { btmtk_data->isopkt_intf = NULL; bt_dev_err(data->hdev, "Failed to claim iso interface"); return; } set_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags); init_usb_anchor(&btmtk_data->isopkt_anchor); } static void btusb_mtk_release_iso_intf(struct btusb_data *data) { struct btmtk_data *btmtk_data = hci_get_priv(data->hdev); if (btmtk_data->isopkt_intf) { usb_kill_anchored_urbs(&btmtk_data->isopkt_anchor); clear_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags); dev_kfree_skb_irq(btmtk_data->isopkt_skb); btmtk_data->isopkt_skb = NULL; usb_set_intfdata(btmtk_data->isopkt_intf, NULL); usb_driver_release_interface(&btusb_driver, btmtk_data->isopkt_intf); } clear_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags); } static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data) { struct btusb_data *data = hci_get_drvdata(hdev); struct btmtk_data *btmtk_data = hci_get_priv(hdev); int err; /* It's MediaTek specific bluetooth reset mechanism via USB */ if (test_and_set_bit(BTMTK_HW_RESET_ACTIVE, &btmtk_data->flags)) { bt_dev_err(hdev, "last reset failed? Not resetting again"); return -EBUSY; } err = usb_autopm_get_interface(data->intf); if (err < 0) return err; if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags)) btusb_mtk_release_iso_intf(data); btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor); err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id); usb_queue_reset_device(data->intf); clear_bit(BTMTK_HW_RESET_ACTIVE, &btmtk_data->flags); return err; } static int btusb_send_frame_mtk(struct hci_dev *hdev, struct sk_buff *skb) { struct urb *urb; BT_DBG("%s", hdev->name); if (hci_skb_pkt_type(skb) == HCI_ISODATA_PKT) { urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete); if (IS_ERR(urb)) return PTR_ERR(urb); return submit_or_queue_tx_urb(hdev, urb); } else { return btusb_send_frame(hdev, skb); } } static int btusb_mtk_setup(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct btmtk_data *btmtk_data = hci_get_priv(hdev); /* MediaTek WMT vendor cmd requiring below USB resources to * complete the handshake. */ btmtk_data->drv_name = btusb_driver.name; btmtk_data->intf = data->intf; btmtk_data->udev = data->udev; btmtk_data->ctrl_anchor = &data->ctrl_anchor; btmtk_data->reset_sync = btusb_mtk_reset; /* Claim ISO data interface and endpoint */ btmtk_data->isopkt_intf = usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM); if (btmtk_data->isopkt_intf) btusb_mtk_claim_iso_intf(data); return btmtk_usb_setup(hdev); } static int btusb_mtk_shutdown(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct btmtk_data *btmtk_data = hci_get_priv(hdev); if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags)) btusb_mtk_release_iso_intf(data); return btmtk_usb_shutdown(hdev); } #ifdef CONFIG_PM /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */ static int marvell_config_oob_wake(struct hci_dev *hdev) { struct sk_buff *skb; struct btusb_data *data = hci_get_drvdata(hdev); struct device *dev = &data->udev->dev; u16 pin, gap, opcode; int ret; u8 cmd[5]; /* Move on if no wakeup pin specified */ if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) || of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap)) return 0; /* Vendor specific command to configure a GPIO as wake-up pin */ opcode = hci_opcode_pack(0x3F, 0x59); cmd[0] = opcode & 0xFF; cmd[1] = opcode >> 8; cmd[2] = 2; /* length of parameters that follow */ cmd[3] = pin; cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */ skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); if (!skb) { bt_dev_err(hdev, "%s: No memory", __func__); return -ENOMEM; } skb_put_data(skb, cmd, sizeof(cmd)); hci_skb_pkt_type(skb) = HCI_COMMAND_PKT; ret = btusb_send_frame(hdev, skb); if (ret) { bt_dev_err(hdev, "%s: configuration failed", __func__); kfree_skb(skb); return ret; } return 0; } #endif static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; u8 buf[8]; long ret; buf[0] = 0xfe; buf[1] = sizeof(bdaddr_t); memcpy(buf + 2, bdaddr, sizeof(bdaddr_t)); skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); bt_dev_err(hdev, "changing Marvell device address failed (%ld)", ret); return ret; } kfree_skb(skb); return 0; } static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; u8 buf[10]; long ret; buf[0] = 0x01; buf[1] = 0x01; buf[2] = 0x00; buf[3] = sizeof(bdaddr_t); memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); bt_dev_err(hdev, "Change address command failed (%ld)", ret); return ret; } kfree_skb(skb); return 0; } static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; u8 buf[6]; long ret; memcpy(buf, bdaddr, sizeof(bdaddr_t)); skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); bt_dev_err(hdev, "Change address command failed (%ld)", ret); return ret; } kfree_skb(skb); return 0; } #define QCA_MEMDUMP_ACL_HANDLE 0x2EDD #define QCA_MEMDUMP_SIZE_MAX 0x100000 #define QCA_MEMDUMP_VSE_CLASS 0x01 #define QCA_MEMDUMP_MSG_TYPE 0x08 #define QCA_MEMDUMP_PKT_SIZE 248 #define QCA_LAST_SEQUENCE_NUM 0xffff struct qca_dump_hdr { u8 vse_class; u8 msg_type; __le16 seqno; u8 reserved; union { u8 data[0]; struct { __le32 ram_dump_size; u8 data0[0]; } __packed; }; } __packed; static void btusb_dump_hdr_qca(struct hci_dev *hdev, struct sk_buff *skb) { char buf[128]; struct btusb_data *btdata = hci_get_drvdata(hdev); snprintf(buf, sizeof(buf), "Controller Name: 0x%x\n", btdata->qca_dump.controller_id); skb_put_data(skb, buf, strlen(buf)); snprintf(buf, sizeof(buf), "Firmware Version: 0x%x\n", btdata->qca_dump.fw_version); skb_put_data(skb, buf, strlen(buf)); snprintf(buf, sizeof(buf), "Driver: %s\nVendor: qca\n", btusb_driver.name); skb_put_data(skb, buf, strlen(buf)); snprintf(buf, sizeof(buf), "VID: 0x%x\nPID:0x%x\n", btdata->qca_dump.id_vendor, btdata->qca_dump.id_product); skb_put_data(skb, buf, strlen(buf)); snprintf(buf, sizeof(buf), "Lmp Subversion: 0x%x\n", hdev->lmp_subver); skb_put_data(skb, buf, strlen(buf)); } static void btusb_coredump_qca(struct hci_dev *hdev) { int err; static const u8 param[] = { 0x26 }; err = __hci_cmd_send(hdev, 0xfc0c, 1, param); if (err < 0) bt_dev_err(hdev, "%s: triggle crash failed (%d)", __func__, err); } /* * ==0: not a dump pkt. * < 0: fails to handle a dump pkt * > 0: otherwise. */ static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb) { int ret = 1; u8 pkt_type; u8 *sk_ptr; unsigned int sk_len; u16 seqno; u32 dump_size; struct hci_event_hdr *event_hdr; struct hci_acl_hdr *acl_hdr; struct qca_dump_hdr *dump_hdr; struct btusb_data *btdata = hci_get_drvdata(hdev); struct usb_device *udev = btdata->udev; pkt_type = hci_skb_pkt_type(skb); sk_ptr = skb->data; sk_len = skb->len; if (pkt_type == HCI_ACLDATA_PKT) { acl_hdr = hci_acl_hdr(skb); if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE) return 0; sk_ptr += HCI_ACL_HDR_SIZE; sk_len -= HCI_ACL_HDR_SIZE; event_hdr = (struct hci_event_hdr *)sk_ptr; } else { event_hdr = hci_event_hdr(skb); } if ((event_hdr->evt != HCI_VENDOR_PKT) || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE))) return 0; sk_ptr += HCI_EVENT_HDR_SIZE; sk_len -= HCI_EVENT_HDR_SIZE; dump_hdr = (struct qca_dump_hdr *)sk_ptr; if ((sk_len < offsetof(struct qca_dump_hdr, data)) || (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS) || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE)) return 0; /*it is dump pkt now*/ seqno = le16_to_cpu(dump_hdr->seqno); if (seqno == 0) { set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags); dump_size = le32_to_cpu(dump_hdr->ram_dump_size); if (!dump_size || (dump_size > QCA_MEMDUMP_SIZE_MAX)) { ret = -EILSEQ; bt_dev_err(hdev, "Invalid memdump size(%u)", dump_size); goto out; } ret = hci_devcd_init(hdev, dump_size); if (ret < 0) { bt_dev_err(hdev, "memdump init error(%d)", ret); goto out; } btdata->qca_dump.ram_dump_size = dump_size; btdata->qca_dump.ram_dump_seqno = 0; sk_ptr += offsetof(struct qca_dump_hdr, data0); sk_len -= offsetof(struct qca_dump_hdr, data0); usb_disable_autosuspend(udev); bt_dev_info(hdev, "%s memdump size(%u)\n", (pkt_type == HCI_ACLDATA_PKT) ? "ACL" : "event", dump_size); } else { sk_ptr += offsetof(struct qca_dump_hdr, data); sk_len -= offsetof(struct qca_dump_hdr, data); } if (!btdata->qca_dump.ram_dump_size) { ret = -EINVAL; bt_dev_err(hdev, "memdump is not active"); goto out; } if ((seqno > btdata->qca_dump.ram_dump_seqno + 1) && (seqno != QCA_LAST_SEQUENCE_NUM)) { dump_size = QCA_MEMDUMP_PKT_SIZE * (seqno - btdata->qca_dump.ram_dump_seqno - 1); hci_devcd_append_pattern(hdev, 0x0, dump_size); bt_dev_err(hdev, "expected memdump seqno(%u) is not received(%u)\n", btdata->qca_dump.ram_dump_seqno, seqno); btdata->qca_dump.ram_dump_seqno = seqno; kfree_skb(skb); return ret; } skb_pull(skb, skb->len - sk_len); hci_devcd_append(hdev, skb); btdata->qca_dump.ram_dump_seqno++; if (seqno == QCA_LAST_SEQUENCE_NUM) { bt_dev_info(hdev, "memdump done: pkts(%u), total(%u)\n", btdata->qca_dump.ram_dump_seqno, btdata->qca_dump.ram_dump_size); hci_devcd_complete(hdev); goto out; } return ret; out: if (btdata->qca_dump.ram_dump_size) usb_enable_autosuspend(udev); btdata->qca_dump.ram_dump_size = 0; btdata->qca_dump.ram_dump_seqno = 0; clear_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags); if (ret < 0) kfree_skb(skb); return ret; } static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff *skb) { if (handle_dump_pkt_qca(hdev, skb)) return 0; return hci_recv_frame(hdev, skb); } static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff *skb) { if (handle_dump_pkt_qca(hdev, skb)) return 0; return hci_recv_frame(hdev, skb); } #define QCA_DFU_PACKET_LEN 4096 #define QCA_GET_TARGET_VERSION 0x09 #define QCA_CHECK_STATUS 0x05 #define QCA_DFU_DOWNLOAD 0x01 #define QCA_SYSCFG_UPDATED 0x40 #define QCA_PATCH_UPDATED 0x80 #define QCA_DFU_TIMEOUT 3000 #define QCA_FLAG_MULTI_NVM 0x80 #define QCA_BT_RESET_WAIT_MS 100 #define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 #define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 struct qca_version { __le32 rom_version; __le32 patch_version; __le32 ram_version; __u8 chip_id; __u8 platform_id; __le16 flag; __u8 reserved[4]; } __packed; struct qca_rampatch_version { __le16 rom_version_high; __le16 rom_version_low; __le16 patch_version; } __packed; struct qca_device_info { u32 rom_version; u8 rampatch_hdr; /* length of header in rampatch */ u8 nvm_hdr; /* length of header in NVM */ u8 ver_offset; /* offset of version structure in rampatch */ }; static const struct qca_device_info qca_devices_table[] = { { 0x00000100, 20, 4, 8 }, /* Rome 1.0 */ { 0x00000101, 20, 4, 8 }, /* Rome 1.1 */ { 0x00000200, 28, 4, 16 }, /* Rome 2.0 */ { 0x00000201, 28, 4, 16 }, /* Rome 2.1 */ { 0x00000300, 28, 4, 16 }, /* Rome 3.0 */ { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ { 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */ }; static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, void *data, u16 size) { int pipe, err; u8 *buf; buf = kmalloc(size, GFP_KERNEL); if (!buf) return -ENOMEM; /* Found some of USB hosts have IOT issues with ours so that we should * not wait until HCI layer is ready. */ pipe = usb_rcvctrlpipe(udev, 0); err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, buf, size, USB_CTRL_GET_TIMEOUT); if (err < 0) { dev_err(&udev->dev, "Failed to access otp area (%d)", err); goto done; } memcpy(data, buf, size); done: kfree(buf); return err; } static int btusb_setup_qca_download_fw(struct hci_dev *hdev, const struct firmware *firmware, size_t hdr_size) { struct btusb_data *btdata = hci_get_drvdata(hdev); struct usb_device *udev = btdata->udev; size_t count, size, sent = 0; int pipe, len, err; u8 *buf; buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL); if (!buf) return -ENOMEM; count = firmware->size; size = min_t(size_t, count, hdr_size); memcpy(buf, firmware->data, size); /* USB patches should go down to controller through USB path * because binary format fits to go down through USB channel. * USB control path is for patching headers and USB bulk is for * patch body. */ pipe = usb_sndctrlpipe(udev, 0); err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR, 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); if (err < 0) { bt_dev_err(hdev, "Failed to send headers (%d)", err); goto done; } sent += size; count -= size; /* ep2 need time to switch from function acl to function dfu, * so we add 20ms delay here. */ msleep(20); while (count) { size = min_t(size_t, count, QCA_DFU_PACKET_LEN); memcpy(buf, firmware->data + sent, size); pipe = usb_sndbulkpipe(udev, 0x02); err = usb_bulk_msg(udev, pipe, buf, size, &len, QCA_DFU_TIMEOUT); if (err < 0) { bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)", sent, firmware->size, err); break; } if (size != len) { bt_dev_err(hdev, "Failed to get bulk buffer"); err = -EILSEQ; break; } sent += size; count -= size; } done: kfree(buf); return err; } static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) { struct qca_rampatch_version *rver; const struct firmware *fw; u32 ver_rom, ver_patch, rver_rom; u16 rver_rom_low, rver_rom_high, rver_patch; char fwname[64]; int err; ver_rom = le32_to_cpu(ver->rom_version); ver_patch = le32_to_cpu(ver->patch_version); snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom); err = request_firmware(&fw, fwname, &hdev->dev); if (err) { bt_dev_err(hdev, "failed to request rampatch file: %s (%d)", fwname, err); return err; } bt_dev_info(hdev, "using rampatch file: %s", fwname); rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset); rver_rom_low = le16_to_cpu(rver->rom_version_low); rver_patch = le16_to_cpu(rver->patch_version); if (ver_rom & ~0xffffU) { rver_rom_high = le16_to_cpu(rver->rom_version_high); rver_rom = rver_rom_high << 16 | rver_rom_low; } else { rver_rom = rver_rom_low; } bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, " "firmware rome 0x%x build 0x%x", rver_rom, rver_patch, ver_rom, ver_patch); if (rver_rom != ver_rom || rver_patch <= ver_patch) { bt_dev_err(hdev, "rampatch file version did not match with firmware"); err = -EINVAL; goto done; } err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr); done: release_firmware(fw); return err; } static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size, const struct qca_version *ver) { u32 rom_version = le32_to_cpu(ver->rom_version); u16 flag = le16_to_cpu(ver->flag); if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { /* The board_id should be split into two bytes * The 1st byte is chip ID, and the 2nd byte is platform ID * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID * we have several platforms, and platform IDs are continuously added * Platform ID: * 0x00 is for Mobile * 0x01 is for X86 * 0x02 is for Automotive * 0x03 is for Consumer electronic */ u16 board_id = (ver->chip_id << 8) + ver->platform_id; const char *variant; switch (le32_to_cpu(ver->ram_version)) { case WCN6855_2_0_RAM_VERSION_GF: case WCN6855_2_1_RAM_VERSION_GF: variant = "_gf"; break; default: variant = ""; break; } if (board_id == 0) { snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin", rom_version, variant); } else { snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin", rom_version, variant, board_id); } } else { snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", rom_version); } } static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) { const struct firmware *fw; char fwname[64]; int err; btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver); err = request_firmware(&fw, fwname, &hdev->dev); if (err) { bt_dev_err(hdev, "failed to request NVM file: %s (%d)", fwname, err); return err; } bt_dev_info(hdev, "using NVM file: %s", fwname); err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr); release_firmware(fw); return err; } /* identify the ROM version and check whether patches are needed */ static bool btusb_qca_need_patch(struct usb_device *udev) { struct qca_version ver; if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)) < 0) return false; /* only low ROM versions need patches */ return !(le32_to_cpu(ver.rom_version) & ~0xffffU); } static int btusb_setup_qca(struct hci_dev *hdev) { struct btusb_data *btdata = hci_get_drvdata(hdev); struct usb_device *udev = btdata->udev; const struct qca_device_info *info = NULL; struct qca_version ver; u32 ver_rom; u8 status; int i, err; err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); if (err < 0) return err; ver_rom = le32_to_cpu(ver.rom_version); for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { if (ver_rom == qca_devices_table[i].rom_version) info = &qca_devices_table[i]; } if (!info) { /* If the rom_version is not matched in the qca_devices_table * and the high ROM version is not zero, we assume this chip no * need to load the rampatch and nvm. */ if (ver_rom & ~0xffffU) return 0; bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom); return -ENODEV; } err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status, sizeof(status)); if (err < 0) return err; if (!(status & QCA_PATCH_UPDATED)) { err = btusb_setup_qca_load_rampatch(hdev, &ver, info); if (err < 0) return err; } err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); if (err < 0) return err; btdata->qca_dump.fw_version = le32_to_cpu(ver.patch_version); btdata->qca_dump.controller_id = le32_to_cpu(ver.rom_version); if (!(status & QCA_SYSCFG_UPDATED)) { err = btusb_setup_qca_load_nvm(hdev, &ver, info); if (err < 0) return err; /* WCN6855 2.1 and later will reset to apply firmware downloaded here, so * wait ~100ms for reset Done then go ahead, otherwise, it maybe * cause potential enable failure. */ if (info->rom_version >= 0x00130201) msleep(QCA_BT_RESET_WAIT_MS); } /* Mark HCI_OP_ENHANCED_SETUP_SYNC_CONN as broken as it doesn't seem to * work with the likes of HSP/HFP mSBC. */ set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks); return 0; } static inline int __set_diag_interface(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_interface *intf = data->diag; int i; if (!data->diag) return -ENODEV; data->diag_tx_ep = NULL; data->diag_rx_ep = NULL; for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { struct usb_endpoint_descriptor *ep_desc; ep_desc = &intf->cur_altsetting->endpoint[i].desc; if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { data->diag_tx_ep = ep_desc; continue; } if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { data->diag_rx_ep = ep_desc; continue; } } if (!data->diag_tx_ep || !data->diag_rx_ep) { bt_dev_err(hdev, "invalid diagnostic descriptors"); return -ENODEV; } return 0; } static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable) { struct btusb_data *data = hci_get_drvdata(hdev); struct sk_buff *skb; struct urb *urb; unsigned int pipe; if (!data->diag_tx_ep) return ERR_PTR(-ENODEV); urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); skb = bt_skb_alloc(2, GFP_KERNEL); if (!skb) { usb_free_urb(urb); return ERR_PTR(-ENOMEM); } skb_put_u8(skb, 0xf0); skb_put_u8(skb, enable); pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_tx_complete, skb); skb->dev = (void *)hdev; return urb; } static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; if (!data->diag) return -ENODEV; if (!test_bit(HCI_RUNNING, &hdev->flags)) return -ENETDOWN; urb = alloc_diag_urb(hdev, enable); if (IS_ERR(urb)) return PTR_ERR(urb); return submit_or_queue_tx_urb(hdev, urb); } #ifdef CONFIG_PM static irqreturn_t btusb_oob_wake_handler(int irq, void *priv) { struct btusb_data *data = priv; pm_wakeup_event(&data->udev->dev, 0); pm_system_wakeup(); /* Disable only if not already disabled (keep it balanced) */ if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) { disable_irq_nosync(irq); disable_irq_wake(irq); } return IRQ_HANDLED; } static const struct of_device_id btusb_match_table[] = { { .compatible = "usb1286,204e" }, { .compatible = "usbcf3,e300" }, /* QCA6174A */ { .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */ { } }; MODULE_DEVICE_TABLE(of, btusb_match_table); /* Use an oob wakeup pin? */ static int btusb_config_oob_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct device *dev = &data->udev->dev; int irq, ret; clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags); if (!of_match_device(btusb_match_table, dev)) return 0; /* Move on if no IRQ specified */ irq = of_irq_get_byname(dev->of_node, "wakeup"); if (irq <= 0) { bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__); return 0; } irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler, 0, "OOB Wake-on-BT", data); if (ret) { bt_dev_err(hdev, "%s: IRQ request failed", __func__); return ret; } ret = device_init_wakeup(dev, true); if (ret) { bt_dev_err(hdev, "%s: failed to init_wakeup", __func__); return ret; } data->oob_wake_irq = irq; bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq); return 0; } #endif static void btusb_check_needs_reset_resume(struct usb_interface *intf) { if (dmi_check_system(btusb_needs_reset_resume_table)) interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } static bool btusb_wakeup(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return device_may_wakeup(&data->udev->dev); } static int btusb_shutdown_qca(struct hci_dev *hdev) { struct sk_buff *skb; skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { bt_dev_err(hdev, "HCI reset during shutdown failed"); return PTR_ERR(skb); } kfree_skb(skb); return 0; } static ssize_t force_poll_sync_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { struct btusb_data *data = file->private_data; char buf[3]; buf[0] = data->poll_sync ? 'Y' : 'N'; buf[1] = '\n'; buf[2] = '\0'; return simple_read_from_buffer(user_buf, count, ppos, buf, 2); } static ssize_t force_poll_sync_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { struct btusb_data *data = file->private_data; bool enable; int err; err = kstrtobool_from_user(user_buf, count, &enable); if (err) return err; /* Only allow changes while the adapter is down */ if (test_bit(HCI_UP, &data->hdev->flags)) return -EPERM; if (data->poll_sync == enable) return -EALREADY; data->poll_sync = enable; return count; } static const struct file_operations force_poll_sync_fops = { .open = simple_open, .read = force_poll_sync_read, .write = force_poll_sync_write, .llseek = default_llseek, }; static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_endpoint_descriptor *ep_desc; struct gpio_desc *reset_gpio; struct btusb_data *data; struct hci_dev *hdev; unsigned ifnum_base; int i, err, priv_size; BT_DBG("intf %p id %p", intf, id); if ((id->driver_info & BTUSB_IFNUM_2) && (intf->cur_altsetting->desc.bInterfaceNumber != 0) && (intf->cur_altsetting->desc.bInterfaceNumber != 2)) return -ENODEV; ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber; if (!id->driver_info) { const struct usb_device_id *match; match = usb_match_id(intf, quirks_table); if (match) id = match; } if (id->driver_info == BTUSB_IGNORE) return -ENODEV; if (id->driver_info & BTUSB_ATH3012) { struct usb_device *udev = interface_to_usbdev(intf); /* Old firmware would otherwise let ath3k driver load * patch and sysconfig files */ if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 && !btusb_qca_need_patch(udev)) return -ENODEV; } data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { ep_desc = &intf->cur_altsetting->endpoint[i].desc; if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { data->intr_ep = ep_desc; continue; } if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { data->bulk_tx_ep = ep_desc; continue; } if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { data->bulk_rx_ep = ep_desc; continue; } } if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) return -ENODEV; if (id->driver_info & BTUSB_AMP) { data->cmdreq_type = USB_TYPE_CLASS | 0x01; data->cmdreq = 0x2b; } else { data->cmdreq_type = USB_TYPE_CLASS; data->cmdreq = 0x00; } data->udev = interface_to_usbdev(intf); data->intf = intf; INIT_WORK(&data->work, btusb_work); INIT_WORK(&data->waker, btusb_waker); INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work); skb_queue_head_init(&data->acl_q); init_usb_anchor(&data->deferred); init_usb_anchor(&data->tx_anchor); spin_lock_init(&data->txlock); init_usb_anchor(&data->intr_anchor); init_usb_anchor(&data->bulk_anchor); init_usb_anchor(&data->isoc_anchor); init_usb_anchor(&data->diag_anchor); init_usb_anchor(&data->ctrl_anchor); spin_lock_init(&data->rxlock); priv_size = 0; data->recv_event = hci_recv_frame; data->recv_bulk = btusb_recv_bulk; if (id->driver_info & BTUSB_INTEL_COMBINED) { /* Allocate extra space for Intel device */ priv_size += sizeof(struct btintel_data); /* Override the rx handlers */ data->recv_event = btintel_recv_event; data->recv_bulk = btusb_recv_bulk_intel; } else if (id->driver_info & BTUSB_REALTEK) { /* Allocate extra space for Realtek device */ priv_size += sizeof(struct btrealtek_data); data->recv_event = btusb_recv_event_realtek; } else if (id->driver_info & BTUSB_MEDIATEK) { /* Allocate extra space for Mediatek device */ priv_size += sizeof(struct btmtk_data); } data->recv_acl = hci_recv_frame; hdev = hci_alloc_dev_priv(priv_size); if (!hdev) return -ENOMEM; hdev->bus = HCI_USB; hci_set_drvdata(hdev, data); data->hdev = hdev; SET_HCIDEV_DEV(hdev, &intf->dev); reset_gpio = gpiod_get_optional(&data->udev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(reset_gpio)) { err = PTR_ERR(reset_gpio); goto out_free_dev; } else if (reset_gpio) { data->reset_gpio = reset_gpio; } hdev->open = btusb_open; hdev->close = btusb_close; hdev->flush = btusb_flush; hdev->send = btusb_send_frame; hdev->notify = btusb_notify; hdev->wakeup = btusb_wakeup; #ifdef CONFIG_PM err = btusb_config_oob_wake(hdev); if (err) goto out_free_dev; /* Marvell devices may need a specific chip configuration */ if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) { err = marvell_config_oob_wake(hdev); if (err) goto out_free_dev; } #endif if (id->driver_info & BTUSB_CW6622) set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); if (id->driver_info & BTUSB_BCM2045) set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && (id->driver_info & BTUSB_BCM_PATCHRAM)) { hdev->manufacturer = 15; hdev->setup = btbcm_setup_patchram; hdev->set_diag = btusb_bcm_set_diag; hdev->set_bdaddr = btbcm_set_bdaddr; /* Broadcom LM_DIAG Interface numbers are hardcoded */ data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); } if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && (id->driver_info & BTUSB_BCM_APPLE)) { hdev->manufacturer = 15; hdev->setup = btbcm_setup_apple; hdev->set_diag = btusb_bcm_set_diag; /* Broadcom LM_DIAG Interface numbers are hardcoded */ data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); } /* Combined Intel Device setup to support multiple setup routine */ if (id->driver_info & BTUSB_INTEL_COMBINED) { err = btintel_configure_setup(hdev, btusb_driver.name); if (err) goto out_free_dev; /* Transport specific configuration */ hdev->send = btusb_send_frame_intel; hdev->cmd_timeout = btusb_intel_cmd_timeout; if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT) btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT); if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD) btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD); if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED) btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED); } if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) && (id->driver_info & BTUSB_MEDIATEK)) { hdev->setup = btusb_mtk_setup; hdev->shutdown = btusb_mtk_shutdown; hdev->manufacturer = 70; hdev->cmd_timeout = btmtk_reset_sync; hdev->set_bdaddr = btmtk_set_bdaddr; hdev->send = btusb_send_frame_mtk; set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks); set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); data->recv_acl = btmtk_usb_recv_acl; data->suspend = btmtk_usb_suspend; data->resume = btmtk_usb_resume; } if (id->driver_info & BTUSB_SWAVE) { set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL_BOOT) { hdev->manufacturer = 2; set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); } if (id->driver_info & BTUSB_ATH3012) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); } if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->shutdown = btusb_shutdown_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; hdev->cmd_timeout = btusb_qca_cmd_timeout; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); btusb_check_needs_reset_resume(intf); } if (id->driver_info & BTUSB_QCA_WCN6855) { data->qca_dump.id_vendor = id->idVendor; data->qca_dump.id_product = id->idProduct; data->recv_event = btusb_recv_evt_qca; data->recv_acl = btusb_recv_acl_qca; hci_devcd_register(hdev, btusb_coredump_qca, btusb_dump_hdr_qca, NULL); data->setup_on_usb = btusb_setup_qca; hdev->shutdown = btusb_shutdown_qca; hdev->set_bdaddr = btusb_set_bdaddr_wcn6855; hdev->cmd_timeout = btusb_qca_cmd_timeout; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); hci_set_msft_opcode(hdev, 0xFD70); } if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL; } else { /* Interface orders are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1); data->isoc_ifnum = ifnum_base + 1; } if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) && (id->driver_info & BTUSB_REALTEK)) { btrtl_set_driver_name(hdev, btusb_driver.name); hdev->setup = btusb_setup_realtek; hdev->shutdown = btrtl_shutdown_realtek; hdev->cmd_timeout = btusb_rtl_cmd_timeout; hdev->hw_error = btusb_rtl_hw_error; /* Realtek devices need to set remote wakeup on auto-suspend */ set_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags); set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags); } if (id->driver_info & BTUSB_ACTIONS_SEMI) { /* Support is advertised, but not implemented */ set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE, &hdev->quirks); } if (!reset) set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { if (!disable_scofix) set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); } if (id->driver_info & BTUSB_BROKEN_ISOC) data->isoc = NULL; if (id->driver_info & BTUSB_WIDEBAND_SPEECH) set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); if (id->driver_info & BTUSB_INVALID_LE_STATES) set_bit(HCI_QUIRK_BROKEN_LE_STATES, &hdev->quirks); if (id->driver_info & BTUSB_DIGIANSWER) { data->cmdreq_type = USB_TYPE_VENDOR; set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); } if (id->driver_info & BTUSB_CSR) { struct usb_device *udev = data->udev; u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); /* Old firmware would otherwise execute USB reset */ if (bcdDevice < 0x117) set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); /* This must be set first in case we disable it for fakes */ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); /* Fake CSR devices with broken commands */ if (le16_to_cpu(udev->descriptor.idVendor) == 0x0a12 && le16_to_cpu(udev->descriptor.idProduct) == 0x0001) hdev->setup = btusb_setup_csr; } if (id->driver_info & BTUSB_SNIFFER) { struct usb_device *udev = data->udev; /* New sniffer firmware has crippled HCI interface */ if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL_BOOT) { /* A bug in the bootloader causes that interrupt interface is * only enabled after receiving SetInterface(0, AltSetting=0). */ err = usb_set_interface(data->udev, 0, 0); if (err < 0) { BT_ERR("failed to set interface 0, alt 0 %d", err); goto out_free_dev; } } if (data->isoc) { err = usb_driver_claim_interface(&btusb_driver, data->isoc, data); if (err < 0) goto out_free_dev; } if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) { if (!usb_driver_claim_interface(&btusb_driver, data->diag, data)) __set_diag_interface(hdev); else data->diag = NULL; } if (enable_autosuspend) usb_enable_autosuspend(data->udev); data->poll_sync = enable_poll_sync; err = hci_register_dev(hdev); if (err < 0) goto out_free_dev; usb_set_intfdata(intf, data); debugfs_create_file("force_poll_sync", 0644, hdev->debugfs, data, &force_poll_sync_fops); return 0; out_free_dev: if (data->reset_gpio) gpiod_put(data->reset_gpio); hci_free_dev(hdev); return err; } static void btusb_disconnect(struct usb_interface *intf) { struct btusb_data *data = usb_get_intfdata(intf); struct hci_dev *hdev; BT_DBG("intf %p", intf); if (!data) return; hdev = data->hdev; usb_set_intfdata(data->intf, NULL); if (data->isoc) usb_set_intfdata(data->isoc, NULL); if (data->diag) usb_set_intfdata(data->diag, NULL); hci_unregister_dev(hdev); if (intf == data->intf) { if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); if (data->diag) usb_driver_release_interface(&btusb_driver, data->diag); } else if (intf == data->isoc) { if (data->diag) usb_driver_release_interface(&btusb_driver, data->diag); usb_driver_release_interface(&btusb_driver, data->intf); } else if (intf == data->diag) { usb_driver_release_interface(&btusb_driver, data->intf); if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); } if (data->oob_wake_irq) device_init_wakeup(&data->udev->dev, false); if (data->reset_gpio) gpiod_put(data->reset_gpio); hci_free_dev(hdev); } #ifdef CONFIG_PM static int btusb_suspend(struct usb_interface *intf, pm_message_t message) { struct btusb_data *data = usb_get_intfdata(intf); BT_DBG("intf %p", intf); /* Don't auto-suspend if there are connections; external suspend calls * shall never fail. */ if (PMSG_IS_AUTO(message) && hci_conn_count(data->hdev)) return -EBUSY; if (data->suspend_count++) return 0; spin_lock_irq(&data->txlock); if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) { set_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); } else { spin_unlock_irq(&data->txlock); data->suspend_count--; return -EBUSY; } cancel_work_sync(&data->work); if (data->suspend) data->suspend(data->hdev); btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor); if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) { set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags); enable_irq_wake(data->oob_wake_irq); enable_irq(data->oob_wake_irq); } /* For global suspend, Realtek devices lose the loaded fw * in them. But for autosuspend, firmware should remain. * Actually, it depends on whether the usb host sends * set feature (enable wakeup) or not. */ if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) { if (PMSG_IS_AUTO(message) && device_can_wakeup(&data->udev->dev)) data->udev->do_remote_wakeup = 1; else if (!PMSG_IS_AUTO(message) && !device_may_wakeup(&data->udev->dev)) { data->udev->do_remote_wakeup = 0; data->udev->reset_resume = 1; } } return 0; } static void play_deferred(struct btusb_data *data) { struct urb *urb; int err; while ((urb = usb_get_from_anchor(&data->deferred))) { usb_anchor_urb(urb, &data->tx_anchor); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p submission failed (%d)", data->hdev->name, urb, -err); kfree(urb->setup_packet); usb_unanchor_urb(urb); usb_free_urb(urb); break; } data->tx_in_flight++; usb_free_urb(urb); } /* Cleanup the rest deferred urbs. */ while ((urb = usb_get_from_anchor(&data->deferred))) { kfree(urb->setup_packet); usb_free_urb(urb); } } static int btusb_resume(struct usb_interface *intf) { struct btusb_data *data = usb_get_intfdata(intf); struct hci_dev *hdev = data->hdev; int err = 0; BT_DBG("intf %p", intf); if (--data->suspend_count) return 0; /* Disable only if not already disabled (keep it balanced) */ if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) { disable_irq(data->oob_wake_irq); disable_irq_wake(data->oob_wake_irq); } if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { err = btusb_submit_intr_urb(hdev, GFP_NOIO); if (err < 0) { clear_bit(BTUSB_INTR_RUNNING, &data->flags); goto failed; } } if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { err = btusb_submit_bulk_urb(hdev, GFP_NOIO); if (err < 0) { clear_bit(BTUSB_BULK_RUNNING, &data->flags); goto failed; } btusb_submit_bulk_urb(hdev, GFP_NOIO); } if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) clear_bit(BTUSB_ISOC_RUNNING, &data->flags); else btusb_submit_isoc_urb(hdev, GFP_NOIO); } if (data->resume) data->resume(hdev); spin_lock_irq(&data->txlock); play_deferred(data); clear_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); schedule_work(&data->work); return 0; failed: usb_scuttle_anchored_urbs(&data->deferred); done: spin_lock_irq(&data->txlock); clear_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); return err; } #endif #ifdef CONFIG_DEV_COREDUMP static void btusb_coredump(struct device *dev) { struct btusb_data *data = dev_get_drvdata(dev); struct hci_dev *hdev = data->hdev; if (hdev->dump.coredump) hdev->dump.coredump(hdev); } #endif static struct usb_driver btusb_driver = { .name = "btusb", .probe = btusb_probe, .disconnect = btusb_disconnect, #ifdef CONFIG_PM .suspend = btusb_suspend, .resume = btusb_resume, #endif .id_table = btusb_table, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, #ifdef CONFIG_DEV_COREDUMP .driver = { .coredump = btusb_coredump, }, #endif }; module_usb_driver(btusb_driver); module_param(disable_scofix, bool, 0644); MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); module_param(force_scofix, bool, 0644); MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); module_param(enable_autosuspend, bool, 0644); MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default"); module_param(reset, bool, 0644); MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); MODULE_AUTHOR("Marcel Holtmann "); MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); MODULE_VERSION(VERSION); MODULE_LICENSE("GPL");