/****************************************************************************** * * Module Name: evregion - Operation Region support * *****************************************************************************/ /* * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "acevents.h" #include "acnamesp.h" #include "acinterp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evregion") extern u8 acpi_gbl_default_address_spaces[]; /* Local prototypes */ static void acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node); static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value); /******************************************************************************* * * FUNCTION: acpi_ev_initialize_op_regions * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Execute _REG methods for all Operation Regions that have * an installed default region handler. * ******************************************************************************/ acpi_status acpi_ev_initialize_op_regions(void) { acpi_status status; u32 i; ACPI_FUNCTION_TRACE(ev_initialize_op_regions); status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Run the _REG methods for op_regions in each default address space */ for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { /* * Make sure the installed handler is the DEFAULT handler. If not the * default, the _REG methods will have already been run (when the * handler was installed) */ if (acpi_ev_has_default_handler(acpi_gbl_root_node, acpi_gbl_default_address_spaces [i])) { status = acpi_ev_execute_reg_methods(acpi_gbl_root_node, acpi_gbl_default_address_spaces [i]); } } acpi_gbl_reg_methods_executed = TRUE; (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_address_space_dispatch * * PARAMETERS: region_obj - Internal region object * field_obj - Corresponding field. Can be NULL. * function - Read or Write operation * region_offset - Where in the region to read or write * bit_width - Field width in bits (8, 16, 32, or 64) * value - Pointer to in or out value, must be * a full 64-bit integer * * RETURN: Status * * DESCRIPTION: Dispatch an address space or operation region access to * a previously installed handler. * * NOTE: During early initialization, we always install the default region * handlers for Memory, I/O and PCI_Config. This ensures that these operation * region address spaces are always available as per the ACPI specification. * This is especially needed in order to support the execution of * module-level AML code during loading of the ACPI tables. * ******************************************************************************/ acpi_status acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, union acpi_operand_object *field_obj, u32 function, u32 region_offset, u32 bit_width, u64 *value) { acpi_status status; acpi_adr_space_handler handler; acpi_adr_space_setup region_setup; union acpi_operand_object *handler_desc; union acpi_operand_object *region_obj2; void *region_context = NULL; struct acpi_connection_info *context; acpi_physical_address address; ACPI_FUNCTION_TRACE(ev_address_space_dispatch); region_obj2 = acpi_ns_get_secondary_object(region_obj); if (!region_obj2) { return_ACPI_STATUS(AE_NOT_EXIST); } /* Ensure that there is a handler associated with this region */ handler_desc = region_obj->region.handler; if (!handler_desc) { ACPI_ERROR((AE_INFO, "No handler for Region [%4.4s] (%p) [%s]", acpi_ut_get_node_name(region_obj->region.node), region_obj, acpi_ut_get_region_name(region_obj->region. space_id))); return_ACPI_STATUS(AE_NOT_EXIST); } context = handler_desc->address_space.context; /* * It may be the case that the region has never been initialized. * Some types of regions require special init code */ if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { /* This region has not been initialized yet, do it */ region_setup = handler_desc->address_space.setup; if (!region_setup) { /* No initialization routine, exit with error */ ACPI_ERROR((AE_INFO, "No init routine for region(%p) [%s]", region_obj, acpi_ut_get_region_name(region_obj->region. space_id))); return_ACPI_STATUS(AE_NOT_EXIST); } /* * We must exit the interpreter because the region setup will * potentially execute control methods (for example, the _REG method * for this region) */ acpi_ex_exit_interpreter(); status = region_setup(region_obj, ACPI_REGION_ACTIVATE, context, ®ion_context); /* Re-enter the interpreter */ acpi_ex_enter_interpreter(); /* Check for failure of the Region Setup */ if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "During region initialization: [%s]", acpi_ut_get_region_name(region_obj-> region. space_id))); return_ACPI_STATUS(status); } /* Region initialization may have been completed by region_setup */ if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE; /* * Save the returned context for use in all accesses to * the handler for this particular region */ if (!(region_obj2->extra.region_context)) { region_obj2->extra.region_context = region_context; } } } /* We have everything we need, we can invoke the address space handler */ handler = handler_desc->address_space.handler; address = (region_obj->region.address + region_offset); /* * Special handling for generic_serial_bus and general_purpose_io: * There are three extra parameters that must be passed to the * handler via the context: * 1) Connection buffer, a resource template from Connection() op * 2) Length of the above buffer * 3) Actual access length from the access_as() op * * In addition, for general_purpose_io, the Address and bit_width fields * are defined as follows: * 1) Address is the pin number index of the field (bit offset from * the previous Connection) * 2) bit_width is the actual bit length of the field (number of pins) */ if ((region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) && context && field_obj) { /* Get the Connection (resource_template) buffer */ context->connection = field_obj->field.resource_buffer; context->length = field_obj->field.resource_length; context->access_length = field_obj->field.access_length; } if ((region_obj->region.space_id == ACPI_ADR_SPACE_GPIO) && context && field_obj) { /* Get the Connection (resource_template) buffer */ context->connection = field_obj->field.resource_buffer; context->length = field_obj->field.resource_length; context->access_length = field_obj->field.access_length; address = field_obj->field.pin_number_index; bit_width = field_obj->field.bit_length; } ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, "Handler %p (@%p) Address %8.8X%8.8X [%s]\n", ®ion_obj->region.handler->address_space, handler, ACPI_FORMAT_UINT64(address), acpi_ut_get_region_name(region_obj->region. space_id))); if (!(handler_desc->address_space.handler_flags & ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { /* * For handlers other than the default (supplied) handlers, we must * exit the interpreter because the handler *might* block -- we don't * know what it will do, so we can't hold the lock on the intepreter. */ acpi_ex_exit_interpreter(); } /* Call the handler */ status = handler(function, address, bit_width, value, context, region_obj2->extra.region_context); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]", acpi_ut_get_region_name(region_obj->region. space_id))); } if (!(handler_desc->address_space.handler_flags & ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { /* * We just returned from a non-default handler, we must re-enter the * interpreter */ acpi_ex_enter_interpreter(); } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_detach_region * * PARAMETERS: region_obj - Region Object * acpi_ns_is_locked - Namespace Region Already Locked? * * RETURN: None * * DESCRIPTION: Break the association between the handler and the region * this is a two way association. * ******************************************************************************/ void acpi_ev_detach_region(union acpi_operand_object *region_obj, u8 acpi_ns_is_locked) { union acpi_operand_object *handler_obj; union acpi_operand_object *obj_desc; union acpi_operand_object *start_desc; union acpi_operand_object **last_obj_ptr; acpi_adr_space_setup region_setup; void **region_context; union acpi_operand_object *region_obj2; acpi_status status; ACPI_FUNCTION_TRACE(ev_detach_region); region_obj2 = acpi_ns_get_secondary_object(region_obj); if (!region_obj2) { return_VOID; } region_context = ®ion_obj2->extra.region_context; /* Get the address handler from the region object */ handler_obj = region_obj->region.handler; if (!handler_obj) { /* This region has no handler, all done */ return_VOID; } /* Find this region in the handler's list */ obj_desc = handler_obj->address_space.region_list; start_desc = obj_desc; last_obj_ptr = &handler_obj->address_space.region_list; while (obj_desc) { /* Is this the correct Region? */ if (obj_desc == region_obj) { ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, "Removing Region %p from address handler %p\n", region_obj, handler_obj)); /* This is it, remove it from the handler's list */ *last_obj_ptr = obj_desc->region.next; obj_desc->region.next = NULL; /* Must clear field */ if (acpi_ns_is_locked) { status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { return_VOID; } } /* Now stop region accesses by executing the _REG method */ status = acpi_ev_execute_reg_method(region_obj, ACPI_REG_DISCONNECT); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "from region _REG, [%s]", acpi_ut_get_region_name (region_obj->region.space_id))); } if (acpi_ns_is_locked) { status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { return_VOID; } } /* * If the region has been activated, call the setup handler with * the deactivate notification */ if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) { region_setup = handler_obj->address_space.setup; status = region_setup(region_obj, ACPI_REGION_DEACTIVATE, handler_obj->address_space. context, region_context); /* * region_context should have been released by the deactivate * operation. We don't need access to it anymore here. */ if (region_context) { *region_context = NULL; } /* Init routine may fail, Just ignore errors */ if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "from region handler - deactivate, [%s]", acpi_ut_get_region_name (region_obj->region. space_id))); } region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE); } /* * Remove handler reference in the region * * NOTE: this doesn't mean that the region goes away, the region * is just inaccessible as indicated to the _REG method * * If the region is on the handler's list, this must be the * region's handler */ region_obj->region.handler = NULL; acpi_ut_remove_reference(handler_obj); return_VOID; } /* Walk the linked list of handlers */ last_obj_ptr = &obj_desc->region.next; obj_desc = obj_desc->region.next; /* Prevent infinite loop if list is corrupted */ if (obj_desc == start_desc) { ACPI_ERROR((AE_INFO, "Circular handler list in region object %p", region_obj)); return_VOID; } } /* If we get here, the region was not in the handler's region list */ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, "Cannot remove region %p from address handler %p\n", region_obj, handler_obj)); return_VOID; } /******************************************************************************* * * FUNCTION: acpi_ev_attach_region * * PARAMETERS: handler_obj - Handler Object * region_obj - Region Object * acpi_ns_is_locked - Namespace Region Already Locked? * * RETURN: None * * DESCRIPTION: Create the association between the handler and the region * this is a two way association. * ******************************************************************************/ acpi_status acpi_ev_attach_region(union acpi_operand_object *handler_obj, union acpi_operand_object *region_obj, u8 acpi_ns_is_locked) { ACPI_FUNCTION_TRACE(ev_attach_region); /* Install the region's handler */ if (region_obj->region.handler) { return_ACPI_STATUS(AE_ALREADY_EXISTS); } ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, "Adding Region [%4.4s] %p to address handler %p [%s]\n", acpi_ut_get_node_name(region_obj->region.node), region_obj, handler_obj, acpi_ut_get_region_name(region_obj->region. space_id))); /* Link this region to the front of the handler's list */ region_obj->region.next = handler_obj->address_space.region_list; handler_obj->address_space.region_list = region_obj; region_obj->region.handler = handler_obj; acpi_ut_add_reference(handler_obj); return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ev_associate_reg_method * * PARAMETERS: region_obj - Region object * * RETURN: Status * * DESCRIPTION: Find and associate _REG method to a region * ******************************************************************************/ void acpi_ev_associate_reg_method(union acpi_operand_object *region_obj) { acpi_name *reg_name_ptr = (acpi_name *) METHOD_NAME__REG; struct acpi_namespace_node *method_node; struct acpi_namespace_node *node; union acpi_operand_object *region_obj2; acpi_status status; ACPI_FUNCTION_TRACE(ev_associate_reg_method); region_obj2 = acpi_ns_get_secondary_object(region_obj); if (!region_obj2) { return_VOID; } node = region_obj->region.node->parent; /* Find any "_REG" method associated with this region definition */ status = acpi_ns_search_one_scope(*reg_name_ptr, node, ACPI_TYPE_METHOD, &method_node); if (ACPI_SUCCESS(status)) { /* * The _REG method is optional and there can be only one per region * definition. This will be executed when the handler is attached * or removed */ region_obj2->extra.method_REG = method_node; } return_VOID; } /******************************************************************************* * * FUNCTION: acpi_ev_execute_reg_method * * PARAMETERS: region_obj - Region object * function - Passed to _REG: On (1) or Off (0) * * RETURN: Status * * DESCRIPTION: Execute _REG method for a region * ******************************************************************************/ acpi_status acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) { struct acpi_evaluate_info *info; union acpi_operand_object *args[3]; union acpi_operand_object *region_obj2; acpi_status status; ACPI_FUNCTION_TRACE(ev_execute_reg_method); region_obj2 = acpi_ns_get_secondary_object(region_obj); if (!region_obj2) { return_ACPI_STATUS(AE_NOT_EXIST); } if (region_obj2->extra.method_REG == NULL) { return_ACPI_STATUS(AE_OK); } /* Allocate and initialize the evaluation information block */ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); if (!info) { return_ACPI_STATUS(AE_NO_MEMORY); } info->prefix_node = region_obj2->extra.method_REG; info->relative_pathname = NULL; info->parameters = args; info->flags = ACPI_IGNORE_RETURN_VALUE; /* * The _REG method has two arguments: * * arg0 - Integer: * Operation region space ID Same value as region_obj->Region.space_id * * arg1 - Integer: * connection status 1 for connecting the handler, 0 for disconnecting * the handler (Passed as a parameter) */ args[0] = acpi_ut_create_integer_object((u64)region_obj->region.space_id); if (!args[0]) { status = AE_NO_MEMORY; goto cleanup1; } args[1] = acpi_ut_create_integer_object((u64)function); if (!args[1]) { status = AE_NO_MEMORY; goto cleanup2; } args[2] = NULL; /* Terminate list */ /* Execute the method, no return value */ ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname (ACPI_TYPE_METHOD, info->prefix_node, NULL)); status = acpi_ns_evaluate(info); acpi_ut_remove_reference(args[1]); cleanup2: acpi_ut_remove_reference(args[0]); cleanup1: ACPI_FREE(info); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_execute_reg_methods * * PARAMETERS: node - Namespace node for the device * space_id - The address space ID * * RETURN: Status * * DESCRIPTION: Run all _REG methods for the input Space ID; * Note: assumes namespace is locked, or system init time. * ******************************************************************************/ acpi_status acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, acpi_adr_space_type space_id) { acpi_status status; struct acpi_reg_walk_info info; ACPI_FUNCTION_TRACE(ev_execute_reg_methods); info.space_id = space_id; info.reg_run_count = 0; ACPI_DEBUG_PRINT_RAW((ACPI_DB_NAMES, " Running _REG methods for SpaceId %s\n", acpi_ut_get_region_name(info.space_id))); /* * Run all _REG methods for all Operation Regions for this space ID. This * is a separate walk in order to handle any interdependencies between * regions and _REG methods. (i.e. handlers must be installed for all * regions of this Space ID before we can run any _REG methods) */ status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run, NULL, &info, NULL); /* Special case for EC: handle "orphan" _REG methods with no region */ if (space_id == ACPI_ADR_SPACE_EC) { acpi_ev_orphan_ec_reg_method(node); } ACPI_DEBUG_PRINT_RAW((ACPI_DB_NAMES, " Executed %u _REG methods for SpaceId %s\n", info.reg_run_count, acpi_ut_get_region_name(info.space_id))); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_reg_run * * PARAMETERS: walk_namespace callback * * DESCRIPTION: Run _REG method for region objects of the requested spaceID * ******************************************************************************/ static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value) { union acpi_operand_object *obj_desc; struct acpi_namespace_node *node; acpi_status status; struct acpi_reg_walk_info *info; info = ACPI_CAST_PTR(struct acpi_reg_walk_info, context); /* Convert and validate the device handle */ node = acpi_ns_validate_handle(obj_handle); if (!node) { return (AE_BAD_PARAMETER); } /* * We only care about regions.and objects that are allowed to have address * space handlers */ if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { return (AE_OK); } /* Check for an existing internal object */ obj_desc = acpi_ns_get_attached_object(node); if (!obj_desc) { /* No object, just exit */ return (AE_OK); } /* Object is a Region */ if (obj_desc->region.space_id != info->space_id) { /* This region is for a different address space, just ignore it */ return (AE_OK); } info->reg_run_count++; status = acpi_ev_execute_reg_method(obj_desc, ACPI_REG_CONNECT); return (status); } /******************************************************************************* * * FUNCTION: acpi_ev_orphan_ec_reg_method * * PARAMETERS: ec_device_node - Namespace node for an EC device * * RETURN: None * * DESCRIPTION: Execute an "orphan" _REG method that appears under the EC * device. This is a _REG method that has no corresponding region * within the EC device scope. The orphan _REG method appears to * have been enabled by the description of the ECDT in the ACPI * specification: "The availability of the region space can be * detected by providing a _REG method object underneath the * Embedded Controller device." * * To quickly access the EC device, we use the ec_device_node used * during EC handler installation. Otherwise, we would need to * perform a time consuming namespace walk, executing _HID * methods to find the EC device. * * MUTEX: Assumes the namespace is locked * ******************************************************************************/ static void acpi_ev_orphan_ec_reg_method(struct acpi_namespace_node *ec_device_node) { acpi_handle reg_method; struct acpi_namespace_node *next_node; acpi_status status; struct acpi_object_list args; union acpi_object objects[2]; ACPI_FUNCTION_TRACE(ev_orphan_ec_reg_method); if (!ec_device_node) { return_VOID; } /* Namespace is currently locked, must release */ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); /* Get a handle to a _REG method immediately under the EC device */ status = acpi_get_handle(ec_device_node, METHOD_NAME__REG, ®_method); if (ACPI_FAILURE(status)) { goto exit; /* There is no _REG method present */ } /* * Execute the _REG method only if there is no Operation Region in * this scope with the Embedded Controller space ID. Otherwise, it * will already have been executed. Note, this allows for Regions * with other space IDs to be present; but the code below will then * execute the _REG method with the embedded_control space_ID argument. */ next_node = acpi_ns_get_next_node(ec_device_node, NULL); while (next_node) { if ((next_node->type == ACPI_TYPE_REGION) && (next_node->object) && (next_node->object->region.space_id == ACPI_ADR_SPACE_EC)) { goto exit; /* Do not execute the _REG */ } next_node = acpi_ns_get_next_node(ec_device_node, next_node); } /* Evaluate the _REG(embedded_control,Connect) method */ args.count = 2; args.pointer = objects; objects[0].type = ACPI_TYPE_INTEGER; objects[0].integer.value = ACPI_ADR_SPACE_EC; objects[1].type = ACPI_TYPE_INTEGER; objects[1].integer.value = ACPI_REG_CONNECT; status = acpi_evaluate_object(reg_method, NULL, &args, NULL); exit: /* We ignore all errors from above, don't care */ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); return_VOID; }