// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2021 Arm Ltd. */ /dts-v1/; #include "sun50i-h616.dtsi" #include "sun50i-h616-cpu-opp.dtsi" #include #include / { model = "X96 Mate"; compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; aliases { serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; reg_vcc5v: vcc5v { /* board wide 5V supply directly from the DC input */ compatible = "regulator-fixed"; regulator-name = "vcc-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; }; &codec { allwinner,audio-routing = "Line Out", "LINEOUT"; status = "okay"; }; &cpu0 { cpu-supply = <®_dcdca>; }; &ehci0 { status = "okay"; }; &ehci2 { status = "okay"; }; &ir { status = "okay"; }; &mmc0 { vmmc-supply = <®_dcdce>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ disable-wp; bus-width = <4>; status = "okay"; }; &mmc2 { vmmc-supply = <®_dcdce>; vqmmc-supply = <®_bldo1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; mmc-ddr-1_8v; mmc-hs200-1_8v; status = "okay"; }; &ohci0 { status = "okay"; }; &ohci2 { status = "okay"; }; &r_rsb { status = "okay"; axp305: pmic@745 { compatible = "x-powers,axp305", "x-powers,axp805", "x-powers,axp806"; interrupt-controller; #interrupt-cells = <1>; reg = <0x745>; x-powers,self-working-mode; vina-supply = <®_vcc5v>; vinb-supply = <®_vcc5v>; vinc-supply = <®_vcc5v>; vind-supply = <®_vcc5v>; vine-supply = <®_vcc5v>; aldoin-supply = <®_vcc5v>; bldoin-supply = <®_vcc5v>; cldoin-supply = <®_vcc5v>; regulators { reg_aldo1: aldo1 { regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-sys"; }; /* Enabled by the Android BSP */ reg_aldo2: aldo2 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3-ext"; status = "disabled"; }; /* Enabled by the Android BSP */ reg_aldo3: aldo3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3-ext2"; status = "disabled"; }; reg_bldo1: bldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc1v8"; }; /* Enabled by the Android BSP */ reg_bldo2: bldo2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc1v8-2"; status = "disabled"; }; bldo3 { /* unused */ }; bldo4 { /* unused */ }; cldo1 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc2v5"; }; cldo2 { /* unused */ }; cldo3 { /* unused */ }; reg_dcdca: dcdca { regulator-always-on; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1100000>; regulator-name = "vdd-cpu"; }; reg_dcdcc: dcdcc { regulator-always-on; regulator-min-microvolt = <810000>; regulator-max-microvolt = <990000>; regulator-name = "vdd-gpu-sys"; }; reg_dcdcd: dcdcd { regulator-always-on; regulator-min-microvolt = <1360000>; regulator-max-microvolt = <1360000>; regulator-name = "vdd-dram"; }; reg_dcdce: dcdce { regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-eth-mmc"; }; sw { /* unused */ }; }; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; &usbotg { dr_mode = "host"; /* USB A type receptable */ status = "okay"; }; &usbphy { status = "okay"; };