/* * Copyright (C) ST-Ericsson SA 2010 * * License terms: GNU General Public License (GPL) version 2 */ #include #include #include #include #include #include #include #include #include "board-mop500.h" enum custom_pin_cfg_t { PINS_FOR_DEFAULT, PINS_FOR_U9500, }; static enum custom_pin_cfg_t pinsfor; /* These simply sets bias for pins */ #define BIAS(a,b) static unsigned long a[] = { b } BIAS(pd, PIN_PULL_DOWN); BIAS(in_nopull, PIN_INPUT_NOPULL); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(out_lo, PIN_OUTPUT_LOW); BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); /* These also force them into GPIO mode */ BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); /* Sleep modes */ BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) #define DB8500_PIN_HOG(pin,conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) /* These are default states associated with device and changed runtime */ #define DB8500_MUX(group,func,dev) \ PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) #define DB8500_PIN(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) #define DB8500_PIN_IDLE(pin, conf, dev) \ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \ pin, conf) #define DB8500_PIN_SLEEP(pin, conf, dev) \ PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ pin, conf) #define DB8500_MUX_STATE(group, func, dev, state) \ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func) #define DB8500_PIN_STATE(pin, conf, dev, state) \ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) #define AB8500_MUX_HOG(group, func) \ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func) #define AB8500_PIN_HOG(pin, conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf) #define AB8500_MUX_STATE(group, func, dev, state) \ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func) #define AB8500_PIN_STATE(pin, conf, dev, state) \ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf) #define AB8505_MUX_HOG(group, func) \ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func) #define AB8505_PIN_HOG(pin, conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf) #define AB8505_MUX_STATE(group, func, dev, state) \ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func) #define AB8505_PIN_STATE(pin, conf, dev, state) \ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf) static struct pinctrl_map __initdata ab8500_pinmap[] = { /* Sysclkreq2 */ AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT), AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT), /* sysclkreq2 disable, mux in gpio configured in input pulldown */ AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP), AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP), /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio2_a_1", "gpio"), AB8500_PIN_HOG("GPIO2_T9", in_pd), /* Sysclkreq4 */ AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), /* sysclkreq4 disable, mux in gpio configured in input pulldown */ AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio4_a_1", "gpio"), AB8500_PIN_HOG("GPIO4_W2", in_pd), /* * pins 6,7,8 and 9 are muxed in YCBCR0123 * configured in INPUT PULL UP */ AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"), AB8500_PIN_HOG("GPIO6_Y18", in_nopull), AB8500_PIN_HOG("GPIO7_AA20", in_nopull), AB8500_PIN_HOG("GPIO8_W18", in_nopull), AB8500_PIN_HOG("GPIO9_AA19", in_nopull), /* * pins 10,11,12 and 13 are muxed in GPIO * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio10_d_1", "gpio"), AB8500_PIN_HOG("GPIO10_U17", in_pd), AB8500_MUX_HOG("gpio11_d_1", "gpio"), AB8500_PIN_HOG("GPIO11_AA18", in_pd), AB8500_MUX_HOG("gpio12_d_1", "gpio"), AB8500_PIN_HOG("GPIO12_U16", in_pd), AB8500_MUX_HOG("gpio13_d_1", "gpio"), AB8500_PIN_HOG("GPIO13_W17", in_pd), /* * pins 14,15 are muxed in PWM1 and PWM2 * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("pwmout1_d_1", "pwmout"), AB8500_PIN_HOG("GPIO14_F14", in_pd), AB8500_MUX_HOG("pwmout2_d_1", "pwmout"), AB8500_PIN_HOG("GPIO15_B17", in_pd), /* * pins 16 is muxed in GPIO * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio16_a_1", "gpio"), AB8500_PIN_HOG("GPIO14_F14", in_pd), /* * pins 17,18,19 and 20 are muxed in AUDIO interface 1 * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("adi1_d_1", "adi1"), AB8500_PIN_HOG("GPIO17_P5", in_pd), AB8500_PIN_HOG("GPIO18_R5", in_pd), AB8500_PIN_HOG("GPIO19_U5", in_pd), AB8500_PIN_HOG("GPIO20_T5", in_pd), /* * pins 21,22 and 23 are muxed in USB UICC * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"), AB8500_PIN_HOG("GPIO21_H19", in_pd), AB8500_PIN_HOG("GPIO22_G20", in_pd), AB8500_PIN_HOG("GPIO23_G19", in_pd), /* * pins 24,25 are muxed in GPIO * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio24_a_1", "gpio"), AB8500_PIN_HOG("GPIO24_T14", in_pd), AB8500_MUX_HOG("gpio25_a_1", "gpio"), AB8500_PIN_HOG("GPIO25_R16", in_pd), /* * pins 26 is muxed in GPIO * configured in OUTPUT LOW */ AB8500_MUX_HOG("gpio26_d_1", "gpio"), AB8500_PIN_HOG("GPIO26_M16", out_lo), /* * pins 27,28 are muxed in DMIC12 * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("dmic12_d_1", "dmic"), AB8500_PIN_HOG("GPIO27_J6", in_pd), AB8500_PIN_HOG("GPIO28_K6", in_pd), /* * pins 29,30 are muxed in DMIC34 * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("dmic34_d_1", "dmic"), AB8500_PIN_HOG("GPIO29_G6", in_pd), AB8500_PIN_HOG("GPIO30_H6", in_pd), /* * pins 31,32 are muxed in DMIC56 * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("dmic56_d_1", "dmic"), AB8500_PIN_HOG("GPIO31_F5", in_pd), AB8500_PIN_HOG("GPIO32_G5", in_pd), /* * pins 34 is muxed in EXTCPENA * configured INPUT PULL DOWN */ AB8500_MUX_HOG("extcpena_d_1", "extcpena"), AB8500_PIN_HOG("GPIO34_R17", in_pd), /* * pins 35 is muxed in GPIO * configured in OUTPUT LOW */ AB8500_MUX_HOG("gpio35_d_1", "gpio"), AB8500_PIN_HOG("GPIO35_W15", in_pd), /* * pins 36,37,38 and 39 are muxed in GPIO * configured in INPUT PULL DOWN */ AB8500_MUX_HOG("gpio36_a_1", "gpio"), AB8500_PIN_HOG("GPIO36_A17", in_pd), AB8500_MUX_HOG("gpio37_a_1", "gpio"), AB8500_PIN_HOG("GPIO37_E15", in_pd), AB8500_MUX_HOG("gpio38_a_1", "gpio"), AB8500_PIN_HOG("GPIO38_C17", in_pd), AB8500_MUX_HOG("gpio39_a_1", "gpio"), AB8500_PIN_HOG("GPIO39_E16", in_pd), /* * pins 40 and 41 are muxed in MODCSLSDA * configured INPUT PULL DOWN */ AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"), AB8500_PIN_HOG("GPIO40_T19", in_pd), AB8500_PIN_HOG("GPIO41_U19", in_pd), /* * pins 42 is muxed in GPIO * configured INPUT PULL DOWN */ AB8500_MUX_HOG("gpio42_a_1", "gpio"), AB8500_PIN_HOG("GPIO42_U2", in_pd), }; static struct pinctrl_map __initdata ab8505_pinmap[] = { /* Sysclkreq2 */ AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), /* sysclkreq2 disable, mux in gpio configured in input pulldown */ AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ AB8505_MUX_HOG("gpio2_a_1", "gpio"), AB8505_PIN_HOG("GPIO2_R5", in_pd), /* Sysclkreq4 */ AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT), AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT), /* sysclkreq4 disable, mux in gpio configured in input pulldown */ AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP), AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP), AB8505_MUX_HOG("gpio10_d_1", "gpio"), AB8505_PIN_HOG("GPIO10_B16", in_pd), AB8505_MUX_HOG("gpio11_d_1", "gpio"), AB8505_PIN_HOG("GPIO11_B17", in_pd), AB8505_MUX_HOG("gpio13_d_1", "gpio"), AB8505_PIN_HOG("GPIO13_D17", in_nopull), AB8505_MUX_HOG("pwmout1_d_1", "pwmout"), AB8505_PIN_HOG("GPIO14_C16", in_pd), AB8505_MUX_HOG("adi2_d_1", "adi2"), AB8505_PIN_HOG("GPIO17_P2", in_pd), AB8505_PIN_HOG("GPIO18_N3", in_pd), AB8505_PIN_HOG("GPIO19_T1", in_pd), AB8505_PIN_HOG("GPIO20_P3", in_pd), AB8505_MUX_HOG("gpio34_a_1", "gpio"), AB8505_PIN_HOG("GPIO34_H14", in_pd), AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"), AB8505_PIN_HOG("GPIO40_J15", in_pd), AB8505_PIN_HOG("GPIO41_J14", in_pd), AB8505_MUX_HOG("gpio50_d_1", "gpio"), AB8505_PIN_HOG("GPIO50_L4", in_nopull), AB8505_MUX_HOG("resethw_d_1", "resethw"), AB8505_PIN_HOG("GPIO52_D16", in_pd), AB8505_MUX_HOG("service_d_1", "service"), AB8505_PIN_HOG("GPIO53_D15", in_pd), }; /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { /* * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to * pull-up * TODO: is this really correct? Snowball doesn't have a LCD. */ DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), DB8500_PIN_HOG("GPIO68_E1", in_pu), DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"), DB8500_PIN("GPIO69_E2", in_pu, "0-0070"), /* LCD VSI1 sleep state */ DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"), /* ske default state */ DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ /* ske sleep state */ DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ /* STM APE pins states */ DB8500_MUX_STATE("stmape_c_1", "stmape", "stm", "ape_mipi34"), DB8500_PIN_STATE("GPIO70_G5", in_nopull, "stm", "ape_mipi34"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", in_nopull, "stm", "ape_mipi34"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", in_nopull, "stm", "ape_mipi34"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", in_nopull, "stm", "ape_mipi34"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", in_nopull, "stm", "ape_mipi34"), /* dat0 */ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, "stm", "ape_mipi34_sleep"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, "stm", "ape_mipi34_sleep"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, "stm", "ape_mipi34_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, "stm", "ape_mipi34_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, "stm", "ape_mipi34_sleep"), /* dat0 */ DB8500_MUX_STATE("stmape_oc1_1", "stmape", "stm", "ape_microsd"), DB8500_PIN_STATE("GPIO23_AA4", in_nopull, "stm", "ape_microsd"), /* clk */ DB8500_PIN_STATE("GPIO25_Y4", in_nopull, "stm", "ape_microsd"), /* dat0 */ DB8500_PIN_STATE("GPIO26_Y2", in_nopull, "stm", "ape_microsd"), /* dat1 */ DB8500_PIN_STATE("GPIO27_AA2", in_nopull, "stm", "ape_microsd"), /* dat2 */ DB8500_PIN_STATE("GPIO28_AA1", in_nopull, "stm", "ape_microsd"), /* dat3 */ DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, "stm", "ape_microsd_sleep"), /* clk */ DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, "stm", "ape_microsd_sleep"), /* dat0 */ DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, "stm", "ape_microsd_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, "stm", "ape_microsd_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, "stm", "ape_microsd_sleep"), /* dat3 */ /* STM Modem pins states */ DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", "stm", "mod_mipi34"), DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", "stm", "mod_mipi34"), DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", "stm", "mod_mipi34"), DB8500_PIN_STATE("GPIO70_G5", in_nopull, "stm", "mod_mipi34"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", in_nopull, "stm", "mod_mipi34"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", in_nopull, "stm", "mod_mipi34"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", in_nopull, "stm", "mod_mipi34"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", in_nopull, "stm", "mod_mipi34"), /* dat0 */ DB8500_PIN_STATE("GPIO75_H2", in_pu, "stm", "mod_mipi34"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", out_lo, "stm", "mod_mipi34"), /* uartmod tx */ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, "stm", "mod_mipi34_sleep"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, "stm", "mod_mipi34_sleep"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, "stm", "mod_mipi34_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, "stm", "mod_mipi34_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, "stm", "mod_mipi34_sleep"), /* dat0 */ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, "stm", "mod_mipi34_sleep"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, "stm", "mod_mipi34_sleep"), /* uartmod tx */ DB8500_MUX_STATE("stmmod_b_1", "stmmod", "stm", "mod_microsd"), DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", "stm", "mod_microsd"), DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", "stm", "mod_microsd"), DB8500_PIN_STATE("GPIO23_AA4", in_nopull, "stm", "mod_microsd"), /* clk */ DB8500_PIN_STATE("GPIO25_Y4", in_nopull, "stm", "mod_microsd"), /* dat0 */ DB8500_PIN_STATE("GPIO26_Y2", in_nopull, "stm", "mod_microsd"), /* dat1 */ DB8500_PIN_STATE("GPIO27_AA2", in_nopull, "stm", "mod_microsd"), /* dat2 */ DB8500_PIN_STATE("GPIO28_AA1", in_nopull, "stm", "mod_microsd"), /* dat3 */ DB8500_PIN_STATE("GPIO75_H2", in_pu, "stm", "mod_microsd"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", out_lo, "stm", "mod_microsd"), /* uartmod tx */ DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, "stm", "mod_microsd_sleep"), /* clk */ DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, "stm", "mod_microsd_sleep"), /* dat0 */ DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, "stm", "mod_microsd_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, "stm", "mod_microsd_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, "stm", "mod_microsd_sleep"), /* dat3 */ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, "stm", "mod_microsd_sleep"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, "stm", "mod_microsd_sleep"), /* uartmod tx */ /* STM dual Modem/APE pins state */ DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", "stm", "mod_mipi34_ape_mipi60"), DB8500_MUX_STATE("stmape_c_2", "stmape", "stm", "mod_mipi34_ape_mipi60"), DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", "stm", "mod_mipi34_ape_mipi60"), DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", "stm", "mod_mipi34_ape_mipi60"), DB8500_PIN_STATE("GPIO70_G5", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ DB8500_PIN_STATE("GPIO75_H2", in_pu, "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", out_lo, "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ DB8500_PIN_STATE("GPIO155_C19", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* clk */ DB8500_PIN_STATE("GPIO156_C17", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ DB8500_PIN_STATE("GPIO157_A18", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ DB8500_PIN_STATE("GPIO158_C18", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ DB8500_PIN_STATE("GPIO159_B19", in_nopull, "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ }; /* * These are specifically for the MOP500 and HREFP (pre-v60) version of the * board, which utilized a TC35892 GPIO expander instead of using a lot of * on-chip pins as the HREFv60 and later does. */ static struct pinctrl_map __initdata mop500_pinmap[] = { /* * XENON Flashgun on image processor GPIO (controlled from image * processor firmware), mux in these image processor GPIO lines 0 * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up * the pins. */ DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), DB8500_PIN_HOG("GPIO6_AF6", in_pu), DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* * Runtime stuff: make it possible to mux in the SKE keypad * and bias the pins */ /* ske default state */ DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ /* ske sleep state */ DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ }; /* * The HREFv60 series of platforms is using available pins on the DB8500 * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. */ static struct pinctrl_map __initdata hrefv60_pinmap[] = { /* Drive WLAN_ENA low */ DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ /* * XENON Flashgun on image processor GPIO (controlled from image * processor firmware), mux in these image processor GPIO lines 0 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. */ DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ /* * Display Interface 1 uses GPIO 65 for RST (reset). * Display Interface 2 uses GPIO 66 for RST (reset). * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) */ DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ /* * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and * GPIO 67 for interrupts. Pull-up the IRQ line and drive both * reset signals low. */ DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ /* * Drive D19-D23 for the ETM PTM trace interface low, * (presumably pins are unconnected therefore grounded here, * the "other alt C1" setting enables these pins) */ DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ /* NFC ENA and RESET to low, pulldown IRQ line */ DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ /* * SKE keyboard partly on alt A and partly on "Other alt C1" * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three * rows of 6 keys, then pull up force sensing interrup and * drive reset and force sensing WU low. */ DB8500_MUX_HOG("kp_a_1", "kp"), DB8500_MUX_HOG("kp_oc1_1", "kp"), DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ /* DiPro Sensor interrupt */ DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ /* Audio Amplifier HF enable */ DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ /* GBF interface, pull low to reset state */ DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ /* MSP : HDTV INTERFACE GPIO line */ DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), /* Accelerometer interrupt lines */ DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ /* * Runtime stuff * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor * etc. */ DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), }; static struct pinctrl_map __initdata u9500_pinmap[] = { /* WLAN_IRQ line */ DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), /* HSI */ DB8500_MUX_HOG("hsir_a_1", "hsi"), DB8500_MUX_HOG("hsit_a_2", "hsi"), DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */ }; static struct pinctrl_map __initdata u8500_pinmap[] = { DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ }; static struct pinctrl_map __initdata snowball_pinmap[] = { /* Mux in SSP0 connected to AB8500, pull down RXD pin */ DB8500_MUX_HOG("ssp0_a_1", "ssp0"), DB8500_PIN_HOG("GPIO145_C13", pd), /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ DB8500_MUX_HOG("sm_b_1", "sm"), /* User LED */ DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), /* Drive RSTn_LAN high */ DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), /* Accelerometer/Magnetometer */ DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ /* WLAN/GBF */ DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ }; /* * passing "pinsfor=" in kernel cmdline allows for custom * configuration of GPIOs on u8500 derived boards. */ static int __init early_pinsfor(char *p) { pinsfor = PINS_FOR_DEFAULT; if (strcmp(p, "u9500-21") == 0) pinsfor = PINS_FOR_U9500; return 0; } early_param("pinsfor", early_pinsfor); int pins_for_u9500(void) { if (pinsfor == PINS_FOR_U9500) return 1; return 0; } static void __init mop500_href_family_pinmaps_init(void) { switch (pinsfor) { case PINS_FOR_U9500: pinctrl_register_mappings(u9500_pinmap, ARRAY_SIZE(u9500_pinmap)); break; case PINS_FOR_DEFAULT: pinctrl_register_mappings(u8500_pinmap, ARRAY_SIZE(u8500_pinmap)); default: break; } } void __init mop500_pinmaps_init(void) { pinctrl_register_mappings(mop500_family_pinmap, ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(mop500_pinmap, ARRAY_SIZE(mop500_pinmap)); mop500_href_family_pinmaps_init(); if (machine_is_u8520()) pinctrl_register_mappings(ab8505_pinmap, ARRAY_SIZE(ab8505_pinmap)); else pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } void __init snowball_pinmaps_init(void) { pinctrl_register_mappings(mop500_family_pinmap, ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(snowball_pinmap, ARRAY_SIZE(snowball_pinmap)); pinctrl_register_mappings(u8500_pinmap, ARRAY_SIZE(u8500_pinmap)); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } void __init hrefv60_pinmaps_init(void) { pinctrl_register_mappings(mop500_family_pinmap, ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(hrefv60_pinmap, ARRAY_SIZE(hrefv60_pinmap)); mop500_href_family_pinmaps_init(); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); }