/* * * arch/arm/mach-u300/include/mach/u300-regs.h * * * Copyright (C) 2006-2009 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * Basic register address definitions in physical memory and * some block definitions for core devices like the timer. * Author: Linus Walleij */ #ifndef __MACH_U300_REGS_H #define __MACH_U300_REGS_H /* * These are the large blocks of memory allocated for I/O. * the defines are used for setting up the I/O memory mapping. */ /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 /* NFIF */ #define U300_NAND_IF_PHYS_BASE 0x9f800000 /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 /* FAST Peripherals */ #define U300_FAST_PER_PHYS_BASE 0xc0000000 #define U300_FAST_PER_VIRT_BASE 0xff020000 /* SLOW Peripherals */ #define U300_SLOW_PER_PHYS_BASE 0xc0010000 #define U300_SLOW_PER_VIRT_BASE 0xff000000 /* Boot ROM */ #define U300_BOOTROM_PHYS_BASE 0xffff0000 #define U300_BOOTROM_VIRT_BASE 0xffff0000 /* SEMI config base */ #ifdef CONFIG_MACH_U300_BS335 #define U300_SEMI_CONFIG_BASE 0x2FFE0000 #else #define U300_SEMI_CONFIG_BASE 0x30000000 #endif /* * AHB peripherals */ /* AHB Peripherals Bridge Controller */ #define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) /* Vectored Interrupt Controller 0, servicing 32 interrupts */ #define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) #define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) /* Vectored Interrupt Controller 1, servicing 32 interrupts */ #define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) #define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) /* Memory Stick Pro (MSPRO) controller */ #define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) /* EMIF Configuration Area */ #define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) /* * FAST peripherals */ /* FAST bridge control */ #define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) /* MMC/SD controller */ #define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) /* PCM I2S0 controller */ #define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) /* PCM I2S1 controller */ #define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) /* I2C0 controller */ #define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) /* I2C1 controller */ #define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) /* SPI controller */ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) #ifdef CONFIG_MACH_U300_BS335 /* Fast UART1 on U335 only */ #define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) #endif /* * SLOW peripherals */ /* SLOW bridge control */ #define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) /* SYSCON */ #define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) #define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) /* Watchdog */ #define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) /* UART0 */ #define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) /* APP side special timer */ #define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) #define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) /* Keypad */ #define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) /* GPIO */ #define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) /* RTC */ #define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) /* Bus tracer */ #define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) /* Event handler (hardware queue) */ #define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) /* Genric Timer */ #define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) /* PPM */ #define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) /* * REST peripherals */ /* ISP (image signal processor) is only available in U335 */ #ifdef CONFIG_MACH_U300_BS335 #define U300_ISP_BASE (0xA0008000) #endif /* DMA Controller base */ #define U300_DMAC_BASE (0xC0020000) /* MSL Base */ #define U300_MSL_BASE (0xc0022000) /* APEX Base */ #define U300_APEX_BASE (0xc0030000) /* Video Encoder Base */ #ifdef CONFIG_MACH_U300_BS335 #define U300_VIDEOENC_BASE (0xc0080000) #else #define U300_VIDEOENC_BASE (0xc0040000) #endif /* XGAM Base */ #define U300_XGAM_BASE (0xd0000000) /* * Virtual accessor macros for static devices */ #endif