/* * linux/arch/arm/mach-realview/core.c * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "core.h" /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; #ifdef CONFIG_ZONE_DMA /* * Adjust the zones if there are restrictions for DMA access. */ void __init realview_adjust_zones(unsigned long *size, unsigned long *hole) { unsigned long dma_size = SZ_256M >> PAGE_SHIFT; if (!machine_is_realview_pbx() || size[0] <= dma_size) return; size[ZONE_NORMAL] = size[0] - dma_size; size[ZONE_DMA] = dma_size; hole[ZONE_NORMAL] = hole[0]; hole[ZONE_DMA] = 0; } #endif #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) static int realview_flash_init(void) { u32 val; val = __raw_readl(REALVIEW_FLASHCTRL); val &= ~REALVIEW_FLASHPROG_FLVPPEN; __raw_writel(val, REALVIEW_FLASHCTRL); return 0; } static void realview_flash_exit(void) { u32 val; val = __raw_readl(REALVIEW_FLASHCTRL); val &= ~REALVIEW_FLASHPROG_FLVPPEN; __raw_writel(val, REALVIEW_FLASHCTRL); } static void realview_flash_set_vpp(int on) { u32 val; val = __raw_readl(REALVIEW_FLASHCTRL); if (on) val |= REALVIEW_FLASHPROG_FLVPPEN; else val &= ~REALVIEW_FLASHPROG_FLVPPEN; __raw_writel(val, REALVIEW_FLASHCTRL); } static struct flash_platform_data realview_flash_data = { .map_name = "cfi_probe", .width = 4, .init = realview_flash_init, .exit = realview_flash_exit, .set_vpp = realview_flash_set_vpp, }; struct platform_device realview_flash_device = { .name = "armflash", .id = 0, .dev = { .platform_data = &realview_flash_data, }, }; int realview_flash_register(struct resource *res, u32 num) { realview_flash_device.resource = res; realview_flash_device.num_resources = num; return platform_device_register(&realview_flash_device); } static struct smsc911x_platform_config smsc911x_config = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device realview_eth_device = { .name = "smsc911x", .id = 0, .num_resources = 2, }; int realview_eth_register(const char *name, struct resource *res) { if (name) realview_eth_device.name = name; realview_eth_device.resource = res; if (strcmp(realview_eth_device.name, "smsc911x") == 0) realview_eth_device.dev.platform_data = &smsc911x_config; return platform_device_register(&realview_eth_device); } struct platform_device realview_usb_device = { .name = "isp1760", .num_resources = 2, }; int realview_usb_register(struct resource *res) { realview_usb_device.resource = res; return platform_device_register(&realview_usb_device); } static struct pata_platform_info pata_platform_data = { .ioport_shift = 1, }; static struct resource pata_resources[] = { [0] = { .start = REALVIEW_CF_BASE, .end = REALVIEW_CF_BASE + 0xff, .flags = IORESOURCE_MEM, }, [1] = { .start = REALVIEW_CF_BASE + 0x100, .end = REALVIEW_CF_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; struct platform_device realview_cf_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(pata_resources), .resource = pata_resources, .dev = { .platform_data = &pata_platform_data, }, }; static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }; struct platform_device realview_i2c_device = { .name = "versatile-i2c", .id = 0, .num_resources = 1, .resource = &realview_i2c_resource, }; static struct i2c_board_info realview_i2c_board_info[] = { { I2C_BOARD_INFO("ds1338", 0xd0 >> 1), }, }; static int __init realview_i2c_init(void) { return i2c_register_board_info(0, realview_i2c_board_info, ARRAY_SIZE(realview_i2c_board_info)); } arch_initcall(realview_i2c_init); #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) /* * This is only used if GPIOLIB support is disabled */ static unsigned int realview_mmc_status(struct device *dev) { struct amba_device *adev = container_of(dev, struct amba_device, dev); u32 mask; if (machine_is_realview_pb1176()) { static bool inserted = false; /* * The PB1176 does not have the status register, * assume it is inserted at startup, then invert * for each call so card insertion/removal will * be detected anyway. This will not be called if * GPIO on PL061 is active, which is the proper * way to do this on the PB1176. */ inserted = !inserted; return inserted ? 0 : 1; } if (adev->res.start == REALVIEW_MMCI0_BASE) mask = 1; else mask = 2; return !(readl(REALVIEW_SYSMCI) & mask); } struct mmci_platform_data realview_mmc0_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, .gpio_wp = 17, .gpio_cd = 16, }; struct mmci_platform_data realview_mmc1_plat_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .status = realview_mmc_status, .gpio_wp = 19, .gpio_cd = 18, }; /* * Clock handling */ static const struct icst_params realview_oscvco_params = { .ref = 24000000, .vco_max = ICST307_VCO_MAX, .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, .s2div = icst307_s2div, .idx2s = icst307_idx2s, }; static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; u32 val; val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); writel(val, clk->vcoreg); writel(0, sys_lock); } static const struct clk_ops oscvco_clk_ops = { .round = icst_clk_round, .set = icst_clk_set, .setvco = realview_oscvco_set, }; static struct clk oscvco_clk = { .ops = &oscvco_clk_ops, .params = &realview_oscvco_params, }; /* * These are fixed clocks. */ static struct clk ref24_clk = { .rate = 24000000, }; static struct clk dummy_apb_pclk; static struct clk_lookup lookups[] = { { /* Bus clock */ .con_id = "apb_pclk", .clk = &dummy_apb_pclk, }, { /* UART0 */ .dev_id = "dev:uart0", .clk = &ref24_clk, }, { /* UART1 */ .dev_id = "dev:uart1", .clk = &ref24_clk, }, { /* UART2 */ .dev_id = "dev:uart2", .clk = &ref24_clk, }, { /* UART3 */ .dev_id = "fpga:uart3", .clk = &ref24_clk, }, { /* UART3 is on the dev chip in PB1176 */ .dev_id = "dev:uart3", .clk = &ref24_clk, }, { /* UART4 only exists in PB1176 */ .dev_id = "fpga:uart4", .clk = &ref24_clk, }, { /* KMI0 */ .dev_id = "fpga:kmi0", .clk = &ref24_clk, }, { /* KMI1 */ .dev_id = "fpga:kmi1", .clk = &ref24_clk, }, { /* MMC0 */ .dev_id = "fpga:mmc0", .clk = &ref24_clk, }, { /* CLCD is in the PB1176 and EB DevChip */ .dev_id = "dev:clcd", .clk = &oscvco_clk, }, { /* PB:CLCD */ .dev_id = "issp:clcd", .clk = &oscvco_clk, }, { /* SSP */ .dev_id = "dev:ssp0", .clk = &ref24_clk, } }; static int __init clk_init(void) { if (machine_is_realview_pb1176()) oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; else oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } core_initcall(clk_init); /* * CLCD support. */ #define SYS_CLCD_NLCDIOON (1 << 2) #define SYS_CLCD_VDDPOSSWITCH (1 << 3) #define SYS_CLCD_PWR3V5SWITCH (1 << 4) #define SYS_CLCD_ID_MASK (0x1f << 8) #define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) #define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) static struct clcd_panel vga = { .mode = { .name = "VGA", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 39721, .left_margin = 40, .right_margin = 24, .upper_margin = 32, .lower_margin = 11, .hsync_len = 96, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; static struct clcd_panel xvga = { .mode = { .name = "XVGA", .refresh = 60, .xres = 1024, .yres = 768, .pixclock = 15748, .left_margin = 152, .right_margin = 48, .upper_margin = 23, .lower_margin = 3, .hsync_len = 104, .vsync_len = 4, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; static struct clcd_panel sanyo_3_8_in = { .mode = { .name = "Sanyo QVGA", .refresh = 116, .xres = 320, .yres = 240, .pixclock = 100000, .left_margin = 6, .right_margin = 6, .upper_margin = 5, .lower_margin = 5, .hsync_len = 6, .vsync_len = 6, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; static struct clcd_panel sanyo_2_5_in = { .mode = { .name = "Sanyo QVGA Portrait", .refresh = 116, .xres = 240, .yres = 320, .pixclock = 100000, .left_margin = 20, .right_margin = 10, .upper_margin = 2, .lower_margin = 2, .hsync_len = 10, .vsync_len = 2, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; static struct clcd_panel epson_2_2_in = { .mode = { .name = "Epson QCIF", .refresh = 390, .xres = 176, .yres = 220, .pixclock = 62500, .left_margin = 3, .right_margin = 2, .upper_margin = 1, .lower_margin = 0, .hsync_len = 3, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, }, .width = -1, .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), .bpp = 16, }; /* * Detect which LCD panel is connected, and return the appropriate * clcd_panel structure. Note: we do not have any information on * the required timings for the 8.4in panel, so we presently assume * VGA timings. */ static struct clcd_panel *realview_clcd_panel(void) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; struct clcd_panel *vga_panel; struct clcd_panel *panel; u32 val; if (machine_is_realview_eb()) vga_panel = &vga; else vga_panel = &xvga; val = readl(sys_clcd) & SYS_CLCD_ID_MASK; if (val == SYS_CLCD_ID_SANYO_3_8) panel = &sanyo_3_8_in; else if (val == SYS_CLCD_ID_SANYO_2_5) panel = &sanyo_2_5_in; else if (val == SYS_CLCD_ID_EPSON_2_2) panel = &epson_2_2_in; else if (val == SYS_CLCD_ID_VGA) panel = vga_panel; else { printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); panel = vga_panel; } return panel; } /* * Disable all display connectors on the interface module. */ static void realview_clcd_disable(struct clcd_fb *fb) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; writel(val, sys_clcd); } /* * Enable the relevant connector on the interface module. */ static void realview_clcd_enable(struct clcd_fb *fb) { void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; u32 val; /* * Enable the PSUs */ val = readl(sys_clcd); val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; writel(val, sys_clcd); } static int realview_clcd_setup(struct clcd_fb *fb) { unsigned long framesize; dma_addr_t dma; if (machine_is_realview_eb()) /* VGA, 16bpp */ framesize = 640 * 480 * 2; else /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, &dma, GFP_KERNEL | GFP_DMA); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; } fb->fb.fix.smem_start = dma; fb->fb.fix.smem_len = framesize; return 0; } static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) { return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, fb->fb.fix.smem_start, fb->fb.fix.smem_len); } static void realview_clcd_remove(struct clcd_fb *fb) { dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, fb->fb.fix.smem_start); } struct clcd_board clcd_plat_data = { .name = "RealView", .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, .mmap = realview_clcd_mmap, .remove = realview_clcd_remove, }; #ifdef CONFIG_LEDS #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) void realview_leds_event(led_event_t ledevt) { unsigned long flags; u32 val; u32 led = 1 << smp_processor_id(); local_irq_save(flags); val = readl(VA_LEDS_BASE); switch (ledevt) { case led_idle_start: val = val & ~led; break; case led_idle_end: val = val | led; break; case led_timer: val = val ^ REALVIEW_SYS_LED7; break; case led_halted: val = 0; break; default: break; } writel(val, VA_LEDS_BASE); local_irq_restore(flags); } #endif /* CONFIG_LEDS */ /* * Where is the timer (VA)? */ void __iomem *timer0_va_base; void __iomem *timer1_va_base; void __iomem *timer2_va_base; void __iomem *timer3_va_base; /* * Set up the clock source and clock events devices */ void __init realview_timer_init(unsigned int timer_irq) { u32 val; /* * set clock frequency: * REALVIEW_REFCLK is 32KHz * REALVIEW_TIMCLK is 1MHz */ val = readl(__io_address(REALVIEW_SCTL_BASE)); writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, __io_address(REALVIEW_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ writel(0, timer0_va_base + TIMER_CTRL); writel(0, timer1_va_base + TIMER_CTRL); writel(0, timer2_va_base + TIMER_CTRL); writel(0, timer3_va_base + TIMER_CTRL); sp804_clocksource_init(timer3_va_base); sp804_clockevents_init(timer0_va_base, timer_irq); } /* * Setup the memory banks. */ void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, struct meminfo *meminfo) { /* * Most RealView platforms have 512MB contiguous RAM at 0x70000000. * Half of this is mirrored at 0. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET meminfo->bank[0].start = 0x70000000; meminfo->bank[0].size = SZ_512M; meminfo->nr_banks = 1; #else meminfo->bank[0].start = 0; meminfo->bank[0].size = SZ_256M; meminfo->nr_banks = 1; #endif }