/* * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "omap5.dtsi" / { model = "TI OMAP5 uEVM board"; compatible = "ti,omap5-uevm", "ti,omap5"; memory { device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; /* HS USB Port 2 RESET */ hsusb2_reset: hsusb2_reset_reg { compatible = "regulator-fixed"; regulator-name = "hsusb2_reset"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ startup-delay-us = <70000>; enable-active-high; }; /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-supply = <&hsusb2_reset>; }; /* HS USB Port 3 RESET */ hsusb3_reset: hsusb3_reset_reg { compatible = "regulator-fixed"; regulator-name = "hsusb3_reset"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ startup-delay-us = <70000>; enable-active-high; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-supply = <&hsusb3_reset>; }; leds { compatible = "gpio-leds"; led@1 { label = "omap5:blue:usr1"; gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ linux,default-trigger = "heartbeat"; default-state = "off"; }; }; }; &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < &twl6040_pins &mcpdm_pins &dmic_pins &mcbsp1_pins &mcbsp2_pins &usbhost_pins &led_gpio_pins >; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ >; }; dmic_pins: pinmux_dmic_pins { pinctrl-single,pins = < 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */ 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */ 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */ 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; mcspi2_pins: pinmux_mcspi2_pins { pinctrl-single,pins = < 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */ >; }; mcspi3_pins: pinmux_mcspi3_pins { pinctrl-single,pins = < 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ >; }; mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ >; }; usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ >; }; led_gpio_pins: pinmux_led_gpio_pins { pinctrl-single,pins = < 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ >; }; }; &omap5_pmx_wkup { pinctrl-names = "default"; pinctrl-0 = < &usbhost_wkup_pins >; usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ >; }; }; &mmc1 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; }; &mmc2 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <8>; ti,non-removable; }; &mmc3 { bus-width = <4>; ti,non-removable; }; &mmc4 { status = "disabled"; }; &mmc5 { status = "disabled"; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; }; &i2c5 { pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; }; &mcbsp3 { status = "disabled"; }; &usbhshost { port2-mode = "ehci-hsic"; port3-mode = "ehci-hsic"; }; &usbhsehci { phys = <0 &hsusb2_phy &hsusb3_phy>; }; &mcspi1 { }; &mcspi2 { pinctrl-names = "default"; pinctrl-0 = <&mcspi2_pins>; }; &mcspi3 { pinctrl-names = "default"; pinctrl-0 = <&mcspi3_pins>; }; &mcspi4 { pinctrl-names = "default"; pinctrl-0 = <&mcspi4_pins>; };