/* * Copyright (C) 2013 Pavel Machek * Copyright (C) 2013-2014 Aaro Koskinen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 (or later) as * published by the Free Software Foundation. */ /dts-v1/; #include "omap34xx.dtsi" #include /* * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall * for omap AES HW crypto support. When linux kernel try to access memory of AES * blocks then kernel receive "Unhandled fault: external abort on non-linefetch" * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no * crash anymore) omap AES support will be disabled for all Nokia N900 devices. * There is "unofficial" version of bootloader which enables AES in L3 firewall * but it is not widely used and to prevent kernel crash rather AES is disabled. * There is also no runtime detection code if AES is disabled in L3 firewall... */ &aes { status = "disabled"; }; / { model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; aliases { i2c0; i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; }; cpus { cpu@0 { cpu0-supply = <&vcc>; }; }; leds { compatible = "gpio-leds"; heartbeat { label = "debug::sleep"; gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ linux,default-trigger = "default-on"; pinctrl-names = "default"; pinctrl-0 = <&debug_leds>; }; }; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; gpio_keys { compatible = "gpio-keys"; camera_lens_cover { label = "Camera Lens Cover"; gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ gpio-key,wakeup; }; camera_focus { label = "Camera Focus"; gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ gpio-key,wakeup; }; camera_capture { label = "Camera Capture"; gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ linux,code = <0xd4>; /* KEY_CAMERA */ gpio-key,wakeup; }; lock_button { label = "Lock Button"; gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ linux,code = <0x98>; /* KEY_SCREENLOCK */ gpio-key,wakeup; }; keypad_slide { label = "Keypad Slide"; gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ gpio-key,wakeup; }; proximity_sensor { label = "Proximity Sensor"; gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ linux,input-type = <5>; /* EV_SW */ linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ }; }; isp1704: isp1704 { compatible = "nxp,isp1704"; nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; usb-phy = <&usb2_phy>; }; tv: connector { compatible = "composite-video-connector"; label = "tv"; port { tv_connector_in: endpoint { remote-endpoint = <&venc_out>; }; }; }; sound: n900-audio { compatible = "nokia,n900-audio"; nokia,cpu-dai = <&mcbsp2>; nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; nokia,headphone-amplifier = <&tpa6130a2>; tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; }; battery: n900-battery { compatible = "nokia,n900-battery"; io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; io-channel-names = "temp", "bsi", "vbat"; }; }; &omap3_pmx_core { pinctrl-names = "default"; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */ >; }; ethernet_pins: pinmux_ethernet_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ >; }; gpmc_pins: pinmux_gpmc_pins { pinctrl-single,pins = < /* address lines */ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ /* data lines, gpmc_d0..d7 not muxable according to TRM */ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ /* * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable * according to TRM. OneNAND seems to require PIN_INPUT on clock. */ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; debug_leds: pinmux_debug_led_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ >; }; mcspi4_pins: pinmux_mcspi4_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ >; }; acx565akm_pins: pinmux_acx565akm_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ >; }; dss_sdi_pins: pinmux_dss_sdi_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; wl1251_pins: pinmux_wl1251 { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ >; }; ssi_pins: pinmux_ssi { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ >; }; modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ >; }; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <2200000>; twl: twl@48 { reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; }; }; #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" &vaux1 { regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; /* due to battery cover sensor */ }; &vaux2 { regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; &vpll1 { regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; &vpll2 { regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; &vsim { regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vio { regulator-name = "VIO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vintana1 { regulator-name = "VINTANA1"; /* fixed to 1500000 */ regulator-always-on; }; &vintana2 { regulator-name = "VINTANA2"; regulator-min-microvolt = <2750000>; regulator-max-microvolt = <2750000>; regulator-always-on; }; &vintdig { regulator-name = "VINTDIG"; /* fixed to 1500000 */ regulator-always-on; }; &twl { twl_audio: audio { compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; twl_power: power { compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; &twl_keypad { linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) MATRIX_KEY(0x00, 0x01, KEY_O) MATRIX_KEY(0x00, 0x02, KEY_P) MATRIX_KEY(0x00, 0x03, KEY_COMMA) MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) MATRIX_KEY(0x00, 0x06, KEY_A) MATRIX_KEY(0x00, 0x07, KEY_S) MATRIX_KEY(0x01, 0x00, KEY_W) MATRIX_KEY(0x01, 0x01, KEY_D) MATRIX_KEY(0x01, 0x02, KEY_F) MATRIX_KEY(0x01, 0x03, KEY_G) MATRIX_KEY(0x01, 0x04, KEY_H) MATRIX_KEY(0x01, 0x05, KEY_J) MATRIX_KEY(0x01, 0x06, KEY_K) MATRIX_KEY(0x01, 0x07, KEY_L) MATRIX_KEY(0x02, 0x00, KEY_E) MATRIX_KEY(0x02, 0x01, KEY_DOT) MATRIX_KEY(0x02, 0x02, KEY_UP) MATRIX_KEY(0x02, 0x03, KEY_ENTER) MATRIX_KEY(0x02, 0x05, KEY_Z) MATRIX_KEY(0x02, 0x06, KEY_X) MATRIX_KEY(0x02, 0x07, KEY_C) MATRIX_KEY(0x02, 0x08, KEY_F9) MATRIX_KEY(0x03, 0x00, KEY_R) MATRIX_KEY(0x03, 0x01, KEY_V) MATRIX_KEY(0x03, 0x02, KEY_B) MATRIX_KEY(0x03, 0x03, KEY_N) MATRIX_KEY(0x03, 0x04, KEY_M) MATRIX_KEY(0x03, 0x05, KEY_SPACE) MATRIX_KEY(0x03, 0x06, KEY_SPACE) MATRIX_KEY(0x03, 0x07, KEY_LEFT) MATRIX_KEY(0x04, 0x00, KEY_T) MATRIX_KEY(0x04, 0x01, KEY_DOWN) MATRIX_KEY(0x04, 0x02, KEY_RIGHT) MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) MATRIX_KEY(0x04, 0x08, KEY_F10) MATRIX_KEY(0x05, 0x00, KEY_Y) MATRIX_KEY(0x05, 0x08, KEY_F11) MATRIX_KEY(0x06, 0x00, KEY_U) MATRIX_KEY(0x07, 0x00, KEY_I) MATRIX_KEY(0x07, 0x01, KEY_F7) MATRIX_KEY(0x07, 0x02, KEY_F8) >; }; &twl_gpio { ti,pullups = <0x0>; ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <100000>; tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ >; AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; ai3x-micbias-vg = <1>; }; tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>; IOVDD-supply = <&vio>; DVDD-supply = <&vio>; ai3x-micbias-vg = <2>; }; tsl2563: tsl2563@29 { compatible = "amstaos,tsl2563"; reg = <0x29>; amstaos,cover-comp-gain = <16>; }; lp5523: lp5523@32 { compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ chan0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; chan8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; }; }; bq27200: bq27200@55 { compatible = "ti,bq27200"; reg = <0x55>; }; tpa6130a2: tpa6130a2@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; Vdd-supply = <&vmmc2>; power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */ }; si4713: si4713@63 { compatible = "silabs,si4713"; reg = <0x63>; interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */ reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */ vio-supply = <&vio>; vdd-supply = <&vaux1>; }; bq24150a: bq24150a@6b { compatible = "ti,bq24150a"; reg = <0x6b>; ti,current-limit = <100>; ti,weak-battery-voltage = <3400>; ti,battery-regulation-voltage = <4200>; ti,charge-current = <650>; ti,termination-current = <100>; ti,resistor-sense = <68>; ti,usb-charger-detection = <&isp1704>; }; }; &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; lis302dl: lis3lv02d@1d { compatible = "st,lis3lv02d"; reg = <0x1d>; Vdd-supply = <&vaux1>; Vdd_IO-supply = <&vio>; interrupt-parent = <&gpio6>; interrupts = <21 20>; /* 181 and 180 */ /* click flags */ st,click-single-x; st,click-single-y; st,click-single-z; /* Limits are 0.5g * value */ st,click-threshold-x = <8>; st,click-threshold-y = <8>; st,click-threshold-z = <10>; /* Click must be longer than time limit */ st,click-time-limit = <9>; /* Kind of debounce filter */ st,click-latency = <50>; /* Interrupt line 2 for click detection */ st,irq2-click; st,wakeup-x-hi; st,wakeup-y-hi; st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ st,wakeup2-z-hi; st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */ st,hipass1-disable; st,hipass2-disable; st,axis-x = <1>; /* LIS3_DEV_X */ st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */ st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ st,min-limit-x = <(-32)>; st,min-limit-y = <3>; st,min-limit-z = <3>; st,max-limit-x = <(-3)>; st,max-limit-y = <32>; st,max-limit-z = <32>; }; }; &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; /* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&vaux3>; vmmc_aux-supply = <&vsim>; bus-width = <8>; non-removable; }; &mmc3 { status = "disabled"; }; &gpmc { ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ pinctrl-names = "default"; pinctrl-0 = <&gpmc_pins>; /* sys_ndmareq1 could be used by the driver, not as gpio65 though */ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */ gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; /* * MTD partition table corresponding to Nokia's * Maemo 5 (Fremantle) release. */ partition@0 { label = "bootloader"; reg = <0x00000000 0x00020000>; read-only; }; partition@1 { label = "config"; reg = <0x00020000 0x00060000>; }; partition@2 { label = "log"; reg = <0x00080000 0x00040000>; }; partition@3 { label = "kernel"; reg = <0x000c0000 0x00200000>; }; partition@4 { label = "initfs"; reg = <0x002c0000 0x00200000>; }; partition@5 { label = "rootfs"; reg = <0x004c0000 0x0fb40000>; }; }; /* Ethernet is on some early development boards and qemu */ ethernet@gpmc { compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <48>; gpmc,cs-wr-off-ns = <24>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <0>; gpmc,adv-wr-off-ns = <0>; gpmc,we-on-ns = <12>; gpmc,we-off-ns = <18>; gpmc,oe-on-ns = <12>; gpmc,oe-off-ns = <48>; gpmc,page-burst-access-ns = <0>; gpmc,access-ns = <42>; gpmc,rd-cycle-ns = <180>; gpmc,wr-cycle-ns = <180>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <0>; gpmc,wr-access-ns = <0>; gpmc,wr-data-mux-bus-ns = <12>; }; }; &mcspi1 { /* * For some reason, touchscreen is necessary for screen to work at * all on real hw. It works well without it on emulator. * * Also... order in the device tree actually matters here. */ tsc2005@0 { compatible = "ti,tsc2005"; spi-max-frequency = <6000000>; reg = <0>; vio-supply = <&vio>; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ touchscreen-fuzz-x = <4>; touchscreen-fuzz-y = <7>; touchscreen-fuzz-pressure = <2>; touchscreen-size-x = <4096>; touchscreen-size-y = <4096>; touchscreen-max-pressure = <2048>; ti,x-plate-ohms = <280>; ti,esd-recovery-timeout-ms = <8000>; }; acx565akm@2 { compatible = "sony,acx565akm"; spi-max-frequency = <6000000>; reg = <2>; pinctrl-names = "default"; pinctrl-0 = <&acx565akm_pins>; label = "lcd"; reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ port { lcd_in: endpoint { remote-endpoint = <&sdi_out>; }; }; }; }; &mcspi4 { pinctrl-names = "default"; pinctrl-0 = <&mcspi4_pins>; wl1251@0 { pinctrl-names = "default"; pinctrl-0 = <&wl1251_pins>; vio-supply = <&vio>; compatible = "ti,wl1251"; reg = <0>; spi-max-frequency = <48000000>; spi-cpol; spi-cpha; ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ interrupt-parent = <&gpio2>; interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ }; }; &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; phy-names = "usb2-phy"; mode = <2>; power = <50>; }; &uart1 { status = "disabled"; }; &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &dss { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&dss_sdi_pins>; vdds_sdi-supply = <&vaux1>; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; sdi_out: endpoint { remote-endpoint = <&lcd_in>; datapairs = <2>; }; }; }; }; &venc { status = "ok"; vdda-supply = <&vdac>; port { venc_out: endpoint { remote-endpoint = <&tv_connector_in>; ti,channels = <1>; }; }; }; &mcbsp2 { status = "ok"; }; &ssi_port1 { pinctrl-names = "default"; pinctrl-0 = <&ssi_pins>; ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ modem: hsi-client { compatible = "nokia,n900-modem"; pinctrl-names = "default"; pinctrl-0 = <&modem_pins>; hsi-channel-ids = <0>, <1>, <2>, <3>; hsi-channel-names = "mcsaab-control", "speech-control", "speech-data", "mcsaab-data"; hsi-speed-kbps = <55000>; hsi-mode = "frame"; hsi-flow = "synchronized"; hsi-arb-mode = "round-robin"; interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ gpio-names = "cmt_apeslpx", "cmt_rst_rq", "cmt_en", "cmt_rst", "cmt_bsi"; }; }; &ssi_port2 { status = "disabled"; };