/* * Copyright (C) 2013 Marek Belisko * * Based on omap3-beagle-xm.dts * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "omap36xx.dtsi" / { model = "OMAP3 GTA04"; compatible = "ti,omap3-gta04", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; }; }; memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; gpio-keys { compatible = "gpio-keys"; aux-button { label = "aux"; linux,code = <169>; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; gpio-key,wakeup; }; }; sound { compatible = "ti,omap-twl4030"; ti,model = "gta04"; ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; }; &omap3_pmx_core { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; }; &i2c1 { clock-frequency = <2600000>; twl: twl@48 { reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; }; twl_audio: audio { compatible = "ti,twl4030-audio"; codec { }; }; }; #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" &i2c2 { clock-frequency = <400000>; /* pressure sensor */ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; /* accelerometer */ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; }; /* leds */ tca6507@45 { compatible = "ti,tca6507"; #address-cells = <1>; #size-cells = <0>; reg = <0x45>; gta04_led0: red_aux@0 { label = "gta04:red:aux"; reg = <0x0>; }; gta04_led1: green_aux@1 { label = "gta04:green:aux"; reg = <0x1>; }; gta04_led3: red_power@3 { label = "gta04:red:power"; reg = <0x3>; linux,default-trigger = "default-on"; }; gta04_led4: green_power@4 { label = "gta04:green:power"; reg = <0x4>; }; }; /* compass aka magnetometer */ hmc5843@1e { compatible = "honeywell,hmc5843"; reg = <0x1e>; }; /* touchscreen */ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; }; &i2c3 { clock-frequency = <100000>; }; &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; phy-names = "usb2-phy"; mode = <3>; power = <50>; }; &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; ti,non-removable; }; &mmc2 { vmmc-supply = <&vaux4>; bus-width = <4>; ti,non-removable; }; &mmc3 { status = "disabled"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &charger { bb_uvolt = <3200000>; bb_uamp = <150>; }; &vaux4 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; };