ioctl VIDIOC_CREATE_BUFS &manvol; VIDIOC_CREATE_BUFS Create buffers for Memory Mapped or User Pointer or DMA Buffer I/O int ioctl int fd int request struct v4l2_create_buffers *argp fd &fd; request VIDIOC_CREATE_BUFS argp This ioctl is used to create buffers for memory mapped or user pointer or DMA buffer I/O. It can be used as an alternative or in addition to the &VIDIOC-REQBUFS; ioctl, when a tighter control over buffers is required. This ioctl can be called multiple times to create buffers of different sizes. To allocate the device buffers applications must initialize the relevant fields of the v4l2_create_buffers structure. The count field must be set to the number of requested buffers, the memory field specifies the requested I/O method and the reserved array must be zeroed. The format field specifies the image format that the buffers must be able to handle. The application has to fill in this &v4l2-format;. Usually this will be done using the &VIDIOC-TRY-FMT; or &VIDIOC-G-FMT; ioctls to ensure that the requested format is supported by the driver. Based on the format's type field the requested buffer size (for single-planar) or plane sizes (for multi-planar formats) will be used for the allocated buffers. The driver may return an error if the size(s) are not supported by the hardware (usually because they are too small). The buffers created by this ioctl will have as minimum size the size defined by the format.pix.sizeimage field (or the corresponding fields for other format types). Usually if the format.pix.sizeimage field is less than the minimum required for the given format, then an error will be returned since drivers will typically not allow this. If it is larger, then the value will be used as-is. In other words, the driver may reject the requested size, but if it is accepted the driver will use it unchanged. When the ioctl is called with a pointer to this structure the driver will attempt to allocate up to the requested number of buffers and store the actual number allocated and the starting index in the count and the index fields respectively. On return count can be smaller than the number requested. &cs-str; __u32 index The starting buffer index, returned by the driver. __u32 count The number of buffers requested or granted. If count == 0, then VIDIOC_CREATE_BUFS will set index to the current number of created buffers, and it will check the validity of memory and format.type. If those are invalid -1 is returned and errno is set to &EINVAL;, otherwise VIDIOC_CREATE_BUFS returns 0. It will never set errno to &EBUSY; in this particular case. __u32 memory Applications set this field to V4L2_MEMORY_MMAP, V4L2_MEMORY_DMABUF or V4L2_MEMORY_USERPTR. See &v4l2-format; format Filled in by the application, preserved by the driver. __u32 reserved[8] A place holder for future extensions. Drivers and applications must set the array to zero. &return-value; ENOMEM No memory to allocate buffers for memory mapped I/O. EINVAL The buffer type (format.type field), requested I/O method (memory) or format (format field) is not valid.