From d902e7856d2a3b5da7acab90e5faec22e395e57a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 6 Mar 2020 15:26:33 +0000 Subject: ASoC: wcd9335: fix address map representation slimbus addresses are 16 bit wide, masking page numbers to wcd register at offset of 12 will limit the number for pages. So it becomes impossible to write to page 0x10 registers. Remove masking 0x800 (slimbus address range) from register address and making use of window parameters in regmap config should fix it and also will represent the registers exactly inline with Datasheet. Remove this unnessary masking and make the registers be inline with datasheet. Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/codecs/wcd9335.c | 18 +++++++++--------- sound/soc/codecs/wcd9335.h | 7 ++++--- 2 files changed, 13 insertions(+), 12 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index f11ffa28683b..700cc1212770 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -4926,11 +4926,11 @@ static const struct regmap_range_cfg wcd9335_ranges[] = { .name = "WCD9335", .range_min = 0x0, .range_max = WCD9335_MAX_REGISTER, - .selector_reg = WCD9335_REG(0x0, 0), + .selector_reg = WCD9335_SEL_REGISTER, .selector_mask = 0xff, .selector_shift = 0, - .window_start = 0x0, - .window_len = 0x1000, + .window_start = 0x800, + .window_len = 0x100, }, }; @@ -4968,12 +4968,12 @@ static const struct regmap_range_cfg wcd9335_ifc_ranges[] = { { .name = "WCD9335-IFC-DEV", .range_min = 0x0, - .range_max = WCD9335_REG(0, 0x7ff), - .selector_reg = WCD9335_REG(0, 0x0), - .selector_mask = 0xff, + .range_max = WCD9335_MAX_REGISTER, + .selector_reg = WCD9335_SEL_REGISTER, + .selector_mask = 0xfff, .selector_shift = 0, - .window_start = 0x0, - .window_len = 0x1000, + .window_start = 0x800, + .window_len = 0x400, }, }; @@ -4981,7 +4981,7 @@ static struct regmap_config wcd9335_ifc_regmap_config = { .reg_bits = 16, .val_bits = 8, .can_multi_write = true, - .max_register = WCD9335_REG(0, 0x7FF), + .max_register = WCD9335_MAX_REGISTER, .ranges = wcd9335_ifc_ranges, .num_ranges = ARRAY_SIZE(wcd9335_ifc_ranges), }; diff --git a/sound/soc/codecs/wcd9335.h b/sound/soc/codecs/wcd9335.h index 4d9be2496c30..72060824c743 100644 --- a/sound/soc/codecs/wcd9335.h +++ b/sound/soc/codecs/wcd9335.h @@ -8,9 +8,9 @@ * in slimbus mode the reg base starts from 0x800 * in i2s/i2c mode the reg base is 0x0 */ -#define WCD9335_REG(pg, r) ((pg << 12) | (r) | 0x800) +#define WCD9335_REG(pg, r) ((pg << 8) | (r)) #define WCD9335_REG_OFFSET(r) (r & 0xFF) -#define WCD9335_PAGE_OFFSET(r) ((r >> 12) & 0xFF) +#define WCD9335_PAGE_OFFSET(r) ((r >> 8) & 0xFF) /* Page-0 Registers */ #define WCD9335_PAGE0_PAGE_REGISTER WCD9335_REG(0x00, 0x000) @@ -600,7 +600,8 @@ #define WCD9335_CDC_CLK_RST_CTRL_FS_CNT_ENABLE BIT(0) #define WCD9335_CDC_CLK_RST_CTRL_FS_CNT_DISABLE 0 #define WCD9335_CDC_TOP_TOP_CFG1 WCD9335_REG(0x0d, 0x082) -#define WCD9335_MAX_REGISTER WCD9335_REG(0x80, 0x0FF) +#define WCD9335_MAX_REGISTER 0xffff +#define WCD9335_SEL_REGISTER 0x800 /* SLIMBUS Slave Registers */ #define WCD9335_SLIM_PGD_PORT_INT_EN0 WCD9335_REG(0, 0x30) -- cgit v1.2.3 From 9401d5aa328e64617d87abd59af1c91cace4c3e4 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Fri, 6 Mar 2020 23:29:27 +0100 Subject: ASoC: jz4740-i2s: Fix divider written at incorrect offset in register The 4-bit divider value was written at offset 8, while the jz4740 programming manual locates it at offset 0. Fixes: 26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s") Signed-off-by: Paul Cercueil Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net Signed-off-by: Mark Brown --- sound/soc/jz4740/jz4740-i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 9d5405881209..434737b2b2b2 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -83,7 +83,7 @@ #define JZ_AIC_I2S_STATUS_BUSY BIT(2) #define JZ_AIC_CLK_DIV_MASK 0xf -#define I2SDIV_DV_SHIFT 8 +#define I2SDIV_DV_SHIFT 0 #define I2SDIV_DV_MASK (0xf << I2SDIV_DV_SHIFT) #define I2SDIV_IDV_SHIFT 8 #define I2SDIV_IDV_MASK (0xf << I2SDIV_IDV_SHIFT) -- cgit v1.2.3 From a22ae72b86a4f754e8d25fbf9ea5a8f77365e531 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 9 Mar 2020 14:27:43 -0500 Subject: ASoC: soc-core: disable route checks for legacy devices v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes, which results in the ASoC card probe failing. Introduce a flag to be set in machine drivers to prevent the probe from stopping in case of incomplete topologies or missing routes. This flag is for backwards compatibility only and shall not be used for newer machine drivers. Example with an HDaudio card with a bad topology: [ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to add route iDisp1_out -> direct -> iDisp1 Tx [ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic: snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19 with the disable_route_checks set: [ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to add route iDisp1_out -> direct -> iDisp1 Tx [ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic: snd_soc_bind_card: disable_route_checks set, ignoring errors on add_routes Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()") Signed-off-by: Pierre-Louis Bossart Acked-by: Kuninori Morimoto Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- include/sound/soc.h | 1 + sound/soc/soc-core.c | 28 ++++++++++++++++++++++++---- 2 files changed, 25 insertions(+), 4 deletions(-) (limited to 'sound') diff --git a/include/sound/soc.h b/include/sound/soc.h index 8a2266676b2d..efb8bad7b0fa 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1058,6 +1058,7 @@ struct snd_soc_card { const struct snd_soc_dapm_route *of_dapm_routes; int num_of_dapm_routes; bool fully_routed; + bool disable_route_checks; /* lists of probed devices belonging to this card */ struct list_head component_dev_list; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 068d809c349a..b17366bac846 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1256,8 +1256,18 @@ static int soc_probe_component(struct snd_soc_card *card, ret = snd_soc_dapm_add_routes(dapm, component->driver->dapm_routes, component->driver->num_dapm_routes); - if (ret < 0) - goto err_probe; + if (ret < 0) { + if (card->disable_route_checks) { + dev_info(card->dev, + "%s: disable_route_checks set, ignoring errors on add_routes\n", + __func__); + } else { + dev_err(card->dev, + "%s: snd_soc_dapm_add_routes failed: %d\n", + __func__, ret); + goto err_probe; + } + } /* see for_each_card_components */ list_add(&component->card_list, &card->component_dev_list); @@ -1938,8 +1948,18 @@ static int snd_soc_bind_card(struct snd_soc_card *card) ret = snd_soc_dapm_add_routes(&card->dapm, card->dapm_routes, card->num_dapm_routes); - if (ret < 0) - goto probe_end; + if (ret < 0) { + if (card->disable_route_checks) { + dev_info(card->dev, + "%s: disable_route_checks set, ignoring errors on add_routes\n", + __func__); + } else { + dev_err(card->dev, + "%s: snd_soc_dapm_add_routes failed: %d\n", + __func__, ret); + goto probe_end; + } + } ret = snd_soc_dapm_add_routes(&card->dapm, card->of_dapm_routes, card->num_of_dapm_routes); -- cgit v1.2.3 From c8061689ffadde941f9c3756f1362bd2b97311c8 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 9 Mar 2020 14:27:44 -0500 Subject: ASoC: Intel: skl_nau88l25_ssm4567: disable route checks Deal with incomplete topologies, this patch restores sound on user devices. Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()") Signed-off-by: Pierre-Louis Bossart Tested-by: ojab // Acked-by: Kuninori Morimoto Link: https://lore.kernel.org/r/20200309192744.18380-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound') diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index c99c8b23e509..b3b835156d77 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -686,6 +686,7 @@ static struct snd_soc_card skylake_audio_card = { .codec_conf = ssm4567_codec_conf, .num_configs = ARRAY_SIZE(ssm4567_codec_conf), .fully_routed = true, + .disable_route_checks = true, .late_probe = skylake_card_late_probe, }; -- cgit v1.2.3 From 2ef81057d80456870b97890dd79c8f56a85b1242 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:08 +0100 Subject: ASoC: Intel: Skylake: Remove superfluous chip initialization Skylake driver does the controller init operation twice: - first during probe (only to stop it just before scheduling probe_work) - and during said probe_work where the actual correct sequence is executed To properly complete boot sequence when iDisp codec is present, bus initialization has to be called only after _i915_init() finishes. With additional _reset_list preceding _i915_init(), iDisp codec never gets the chance to enumerate on the link. Remove the superfluous initialization to address the issue. Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index f755ca2484cf..d66231525356 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -803,6 +803,9 @@ static void skl_probe_work(struct work_struct *work) return; } + skl_init_pci(skl); + skl_dum_set(bus); + err = skl_init_chip(bus, true); if (err < 0) { dev_err(bus->dev, "Init chip failed with err: %d\n", err); @@ -918,8 +921,6 @@ static int skl_first_init(struct hdac_bus *bus) return -ENXIO; } - snd_hdac_bus_reset_link(bus, true); - snd_hdac_bus_parse_capabilities(bus); /* check if PPCAP exists */ @@ -967,11 +968,7 @@ static int skl_first_init(struct hdac_bus *bus) if (err < 0) return err; - /* initialize chip */ - skl_init_pci(skl); - skl_dum_set(bus); - - return skl_init_chip(bus, true); + return 0; } static int skl_probe(struct pci_dev *pci, @@ -1064,8 +1061,6 @@ static int skl_probe(struct pci_dev *pci, if (bus->mlcap) snd_hdac_ext_bus_get_ml_capabilities(bus); - snd_hdac_bus_stop_chip(bus); - /* create device for soc dmic */ err = skl_dmic_device_register(skl); if (err < 0) { -- cgit v1.2.3 From a66f88394a78fec9a05fa6e517e9603e8eca8363 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:09 +0100 Subject: ASoC: Intel: Skylake: Select hda configuration permissively With _reset_link removed from the probe sequence, codec_mask at the time skl_find_hda_machine() is invoked will always be 0, so hda machine will never be chosen. Rather than reorganizing boot flow, be permissive about invalid mask. codec_mask will be set to proper value during probe_work - before skl_codec_create() ever gets called. Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index d66231525356..4827fe6bc1cb 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -481,13 +481,8 @@ static struct skl_ssp_clk skl_ssp_clks[] = { static struct snd_soc_acpi_mach *skl_find_hda_machine(struct skl_dev *skl, struct snd_soc_acpi_mach *machines) { - struct hdac_bus *bus = skl_to_bus(skl); struct snd_soc_acpi_mach *mach; - /* check if we have any codecs detected on bus */ - if (bus->codec_mask == 0) - return NULL; - /* point to common table */ mach = snd_soc_acpi_intel_hda_machines; -- cgit v1.2.3 From e603f11d5df8997d104ab405ff27640b90baffaa Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:10 +0100 Subject: ASoC: Intel: Skylake: Enable codec wakeup during chip init Follow the recommendation set by hda_intel.c and enable HDMI/DP codec wakeup during bus initialization procedure. Disable wakeup once init completes. Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 4827fe6bc1cb..e2e531c96dd1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -130,6 +130,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset) struct hdac_ext_link *hlink; int ret; + snd_hdac_set_codec_wakeup(bus, true); skl_enable_miscbdcge(bus->dev, false); ret = snd_hdac_bus_init_chip(bus, full_reset); @@ -138,6 +139,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset) writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV); skl_enable_miscbdcge(bus->dev, true); + snd_hdac_set_codec_wakeup(bus, false); return ret; } -- cgit v1.2.3 From 9e6c382f5a6161eb55115fb56614b9827f2e7da3 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:11 +0100 Subject: ASoC: Intel: Skylake: Shield against no-NHLT configurations Some configurations expose no NHLT table at all within their /sys/firmware/acpi/tables. To prevent NULL-dereference errors from occurring, adjust probe flow and append additional safety checks in functions involved in NHLT lifecycle. Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-nhlt.c | 3 ++- sound/soc/intel/skylake/skl.c | 9 +++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index 19f328d71f24..d9c8f5cb389e 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -182,7 +182,8 @@ void skl_nhlt_remove_sysfs(struct skl_dev *skl) { struct device *dev = &skl->pci->dev; - sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); + if (skl->nhlt) + sysfs_remove_file(&dev->kobj, &dev_attr_platform_id.attr); } /* diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index e2e531c96dd1..7ad8a75759bd 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -633,6 +633,9 @@ static int skl_clock_device_register(struct skl_dev *skl) struct platform_device_info pdevinfo = {NULL}; struct skl_clk_pdata *clk_pdata; + if (!skl->nhlt) + return 0; + clk_pdata = devm_kzalloc(&skl->pci->dev, sizeof(*clk_pdata), GFP_KERNEL); if (!clk_pdata) @@ -1074,7 +1077,8 @@ out_dsp_free: out_clk_free: skl_clock_device_unregister(skl); out_nhlt_free: - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); out_free: skl_free(bus); @@ -1123,7 +1127,8 @@ static void skl_remove(struct pci_dev *pci) skl_dmic_device_unregister(skl); skl_clock_device_unregister(skl); skl_nhlt_remove_sysfs(skl); - intel_nhlt_free(skl->nhlt); + if (skl->nhlt) + intel_nhlt_free(skl->nhlt); skl_free(bus); dev_set_drvdata(&pci->dev, NULL); } -- cgit v1.2.3 From 024aa45f55ccd40704cfdef61b2a8b6d0de9cdd1 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:13 +0100 Subject: ASoC: Intel: Allow for ROM init retry on CNL platforms Due to unconditional initial timeouts, firmware may fail to load during its initialization. This issue cannot be resolved on driver side as it is caused by external sources such as CSME but has to be accounted for nonetheless. Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 2 -- sound/soc/intel/skylake/cnl-sst.c | 15 ++++++++++----- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 11 insertions(+), 7 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 92a82e6b5fe6..cdafade8abd6 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -38,8 +38,6 @@ /* Delay before scheduling D0i3 entry */ #define BXT_D0I3_DELAY 5000 -#define BXT_FW_ROM_INIT_RETRY 3 - static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); diff --git a/sound/soc/intel/skylake/cnl-sst.c b/sound/soc/intel/skylake/cnl-sst.c index 4f64f097e9ae..060e47ae3391 100644 --- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -109,7 +109,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) { struct firmware stripped_fw; struct skl_dev *cnl = ctx->thread_context; - int ret; + int ret, i; if (!ctx->fw) { ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); @@ -131,12 +131,16 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) stripped_fw.size = ctx->fw->size; skl_dsp_strip_extended_manifest(&stripped_fw); - ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - if (ret < 0) { - dev_err(ctx->dev, "prepare firmware failed: %d\n", ret); - goto cnl_load_base_firmware_failed; + for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { + ret = cnl_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); + if (!ret) + break; + dev_dbg(ctx->dev, "prepare firmware failed: %d\n", ret); } + if (ret < 0) + goto cnl_load_base_firmware_failed; + ret = sst_transfer_fw_host_dma(ctx); if (ret < 0) { dev_err(ctx->dev, "transfer firmware failed: %d\n", ret); @@ -158,6 +162,7 @@ static int cnl_load_base_firmware(struct sst_dsp *ctx) return 0; cnl_load_base_firmware_failed: + dev_err(ctx->dev, "firmware load failed: %d\n", ret); release_firmware(ctx->fw); ctx->fw = NULL; diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index cdfec0fca577..067d1ea11cde 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -67,6 +67,7 @@ struct skl_dev; #define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf +#define BXT_FW_ROM_INIT_RETRY 3 #define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1 -- cgit v1.2.3 From 7693cadac86548b30389a6e11d78c38db654f393 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 5 Mar 2020 15:53:14 +0100 Subject: ASoC: Intel: Skylake: Await purge request ack on CNL Each purge request is sent by driver after master core is powered up and unresetted but before it is unstalled. On unstall, ROM begins processing the request and initializing environment for FW load. Host should await ROM's ack before moving forward. Without doing so, ROM init poll may start too early and false timeouts can occur. Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform") Signed-off-by: Cezary Rojewski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 1 - sound/soc/intel/skylake/cnl-sst.c | 20 ++++++++++++++++++-- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + 3 files changed, 19 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index cdafade8abd6..38b9d7494083 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -17,7 +17,6 @@ #include "skl.h" #define BXT_BASEFW_TIMEOUT 3000 -#define BXT_INIT_TIMEOUT 300 #define BXT_ROM_INIT_TIMEOUT 70 #define BXT_IPC_PURGE_FW 0x01004000 diff --git a/sound/soc/intel/skylake/cnl-sst.c b/sound/soc/intel/skylake/cnl-sst.c index 060e47ae3391..c6abcd5aa67b 100644 --- a/sound/soc/intel/skylake/cnl-sst.c +++ b/sound/soc/intel/skylake/cnl-sst.c @@ -57,18 +57,34 @@ static int cnl_prepare_fw(struct sst_dsp *ctx, const void *fwdata, u32 fwsize) ctx->dsp_ops.stream_tag = stream_tag; memcpy(ctx->dmab.area, fwdata, fwsize); + ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK); + if (ret < 0) { + dev_err(ctx->dev, "dsp core0 power up failed\n"); + ret = -EIO; + goto base_fw_load_failed; + } + /* purge FW request */ sst_dsp_shim_write(ctx, CNL_ADSP_REG_HIPCIDR, CNL_ADSP_REG_HIPCIDR_BUSY | (CNL_IPC_PURGE | ((stream_tag - 1) << CNL_ROM_CTRL_DMA_ID))); - ret = cnl_dsp_enable_core(ctx, SKL_DSP_CORE0_MASK); + ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK); if (ret < 0) { - dev_err(ctx->dev, "dsp boot core failed ret: %d\n", ret); + dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret); ret = -EIO; goto base_fw_load_failed; } + ret = sst_dsp_register_poll(ctx, CNL_ADSP_REG_HIPCIDA, + CNL_ADSP_REG_HIPCIDA_DONE, + CNL_ADSP_REG_HIPCIDA_DONE, + BXT_INIT_TIMEOUT, "HIPCIDA Done"); + if (ret < 0) { + dev_err(ctx->dev, "timeout for purge request: %d\n", ret); + goto base_fw_load_failed; + } + /* enable interrupt */ cnl_ipc_int_enable(ctx); cnl_ipc_op_int_enable(ctx); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 067d1ea11cde..1df9ef422f61 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -68,6 +68,7 @@ struct skl_dev; #define SKL_FW_INIT 0x1 #define SKL_FW_RFW_START 0xf #define BXT_FW_ROM_INIT_RETRY 3 +#define BXT_INIT_TIMEOUT 300 #define SKL_ADSPIC_IPC 1 #define SKL_ADSPIS_IPC 1 -- cgit v1.2.3 From 9b60441692d94effcd37a141035c6106a91ddf8c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 11 Mar 2020 18:04:21 +0000 Subject: ASoC: qdsp6: q6asm-dai: only enable dais from device tree Existing code enables all the playback and capture dais even if there is no device tree entry. This can lead to un-necessary dais in the system which will never be used. So honour whats specfied in device tree. Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200311180422.28363-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) (limited to 'sound') diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index c0d422d0ab94..8b48815ff918 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -69,6 +69,8 @@ struct q6asm_dai_rtd { }; struct q6asm_dai_data { + struct snd_soc_dai_driver *dais; + int num_dais; long long int sid; }; @@ -889,7 +891,7 @@ static const struct snd_soc_component_driver q6asm_fe_dai_component = { .compr_ops = &q6asm_dai_compr_ops, }; -static struct snd_soc_dai_driver q6asm_fe_dais[] = { +static struct snd_soc_dai_driver q6asm_fe_dais_template[] = { Q6ASM_FEDAI_DRIVER(1), Q6ASM_FEDAI_DRIVER(2), Q6ASM_FEDAI_DRIVER(3), @@ -903,10 +905,22 @@ static struct snd_soc_dai_driver q6asm_fe_dais[] = { static int of_q6asm_parse_dai_data(struct device *dev, struct q6asm_dai_data *pdata) { - static struct snd_soc_dai_driver *dai_drv; + struct snd_soc_dai_driver *dai_drv; struct snd_soc_pcm_stream empty_stream; struct device_node *node; - int ret, id, dir; + int ret, id, dir, idx = 0; + + + pdata->num_dais = of_get_child_count(dev->of_node); + if (!pdata->num_dais) { + dev_err(dev, "No dais found in DT\n"); + return -EINVAL; + } + + pdata->dais = devm_kcalloc(dev, pdata->num_dais, sizeof(*dai_drv), + GFP_KERNEL); + if (!pdata->dais) + return -ENOMEM; memset(&empty_stream, 0, sizeof(empty_stream)); @@ -917,7 +931,8 @@ static int of_q6asm_parse_dai_data(struct device *dev, continue; } - dai_drv = &q6asm_fe_dais[id]; + dai_drv = &pdata->dais[idx++]; + *dai_drv = q6asm_fe_dais_template[id]; ret = of_property_read_u32(node, "direction", &dir); if (ret) @@ -955,11 +970,12 @@ static int q6asm_dai_probe(struct platform_device *pdev) dev_set_drvdata(dev, pdata); - of_q6asm_parse_dai_data(dev, pdata); + rc = of_q6asm_parse_dai_data(dev, pdata); + if (rc) + return rc; return devm_snd_soc_register_component(dev, &q6asm_fe_dai_component, - q6asm_fe_dais, - ARRAY_SIZE(q6asm_fe_dais)); + pdata->dais, pdata->num_dais); } static const struct of_device_id q6asm_dai_device_id[] = { -- cgit v1.2.3 From f864edff110d3e6f8995636a9a604f6b98eaa308 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 11 Mar 2020 18:04:22 +0000 Subject: ASoC: qdsp6: q6routing: remove default routing Frontend dais can be configured to rx or tx or both, however having default routes without considering this configuration can lead to failures during card probe as below for compress rx only case. These routing have to come from sound card routing table in device tree. "routing: ASoC: Failed to add route MM_UL1 -> direct -> MultiMedia1 Capture msm-snd-sdm845 sound: ASoC: failed to instantiate card -19 " Reported-by: Vinod Koul Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200311180422.28363-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'sound') diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index 20724102e85a..4d5915b9a06d 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -918,25 +918,6 @@ static const struct snd_soc_dapm_route intercon[] = { {"MM_UL6", NULL, "MultiMedia6 Mixer"}, {"MM_UL7", NULL, "MultiMedia7 Mixer"}, {"MM_UL8", NULL, "MultiMedia8 Mixer"}, - - {"MM_DL1", NULL, "MultiMedia1 Playback" }, - {"MM_DL2", NULL, "MultiMedia2 Playback" }, - {"MM_DL3", NULL, "MultiMedia3 Playback" }, - {"MM_DL4", NULL, "MultiMedia4 Playback" }, - {"MM_DL5", NULL, "MultiMedia5 Playback" }, - {"MM_DL6", NULL, "MultiMedia6 Playback" }, - {"MM_DL7", NULL, "MultiMedia7 Playback" }, - {"MM_DL8", NULL, "MultiMedia8 Playback" }, - - {"MultiMedia1 Capture", NULL, "MM_UL1"}, - {"MultiMedia2 Capture", NULL, "MM_UL2"}, - {"MultiMedia3 Capture", NULL, "MM_UL3"}, - {"MultiMedia4 Capture", NULL, "MM_UL4"}, - {"MultiMedia5 Capture", NULL, "MM_UL5"}, - {"MultiMedia6 Capture", NULL, "MM_UL6"}, - {"MultiMedia7 Capture", NULL, "MM_UL7"}, - {"MultiMedia8 Capture", NULL, "MM_UL8"}, - }; static int routing_hw_params(struct snd_soc_component *component, -- cgit v1.2.3 From 16dcefc23eefda57ee705dcffba67f1bd42c01bc Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Thu, 12 Mar 2020 13:00:58 +0100 Subject: ASoC: SOF: Intel: Fix stream cleanup on hw free Field "substream" gets assigned during stream setup in hda_dsp_pcm_hw_params() but it is never cleared afterwards during cleanup procedure. Now, any non-pcm operation e.g.: compress can mistakenly make use of that pointer as it's bypassing all "if (s->substream)" checks. Nulling the pointer during hw_free operation ensures no wild pointers are left behind. Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations") Signed-off-by: Cezary Rojewski Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200312120058.15057-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda-stream.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/soc/sof/intel/hda-stream.c b/sound/soc/sof/intel/hda-stream.c index c0ab9bb2a797..d2234f802788 100644 --- a/sound/soc/sof/intel/hda-stream.c +++ b/sound/soc/sof/intel/hda-stream.c @@ -547,6 +547,8 @@ int hda_dsp_stream_hw_free(struct snd_sof_dev *sdev, SOF_HDA_REG_PP_PPCTL, mask, 0); spin_unlock_irq(&bus->reg_lock); + stream->substream = NULL; + return 0; } -- cgit v1.2.3 From c42464a4e67383d8daeeaa668ff875e399a38105 Mon Sep 17 00:00:00 2001 From: Amadeusz Sławiński Date: Thu, 12 Mar 2020 08:22:39 -0400 Subject: ASoC: topology: Perform component check upfront MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function soc_tplg_dbytes_create(), calls soc_tplg_init_kcontrol() to perform additional driver specific initialization. While soc_tplg_init_kcontrol() ensures that component is valid before invoking ops->control_load, there is no such check at the end of soc_tplg_dbytes_create() where list_add() is used. Also in quite a few places, there is reference of tplg->comp->dapm or tplg->comp->card, without any checks for tplg->comp. In consequence of the above this may lead to referencing NULL pointer. This allows for removal of now unnecessary checks. Signed-off-by: Amadeusz Sławiński Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20200312122239.14489-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/soc-topology.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'sound') diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 22c38df40d5a..c98766957c10 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -251,7 +251,7 @@ static int soc_tplg_vendor_load_(struct soc_tplg *tplg, { int ret = 0; - if (tplg->comp && tplg->ops && tplg->ops->vendor_load) + if (tplg->ops && tplg->ops->vendor_load) ret = tplg->ops->vendor_load(tplg->comp, tplg->index, hdr); else { dev_err(tplg->dev, "ASoC: no vendor load callback for ID %d\n", @@ -283,7 +283,7 @@ static int soc_tplg_vendor_load(struct soc_tplg *tplg, static int soc_tplg_widget_load(struct soc_tplg *tplg, struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w) { - if (tplg->comp && tplg->ops && tplg->ops->widget_load) + if (tplg->ops && tplg->ops->widget_load) return tplg->ops->widget_load(tplg->comp, tplg->index, w, tplg_w); @@ -295,7 +295,7 @@ static int soc_tplg_widget_load(struct soc_tplg *tplg, static int soc_tplg_widget_ready(struct soc_tplg *tplg, struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w) { - if (tplg->comp && tplg->ops && tplg->ops->widget_ready) + if (tplg->ops && tplg->ops->widget_ready) return tplg->ops->widget_ready(tplg->comp, tplg->index, w, tplg_w); @@ -307,7 +307,7 @@ static int soc_tplg_dai_load(struct soc_tplg *tplg, struct snd_soc_dai_driver *dai_drv, struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai) { - if (tplg->comp && tplg->ops && tplg->ops->dai_load) + if (tplg->ops && tplg->ops->dai_load) return tplg->ops->dai_load(tplg->comp, tplg->index, dai_drv, pcm, dai); @@ -318,7 +318,7 @@ static int soc_tplg_dai_load(struct soc_tplg *tplg, static int soc_tplg_dai_link_load(struct soc_tplg *tplg, struct snd_soc_dai_link *link, struct snd_soc_tplg_link_config *cfg) { - if (tplg->comp && tplg->ops && tplg->ops->link_load) + if (tplg->ops && tplg->ops->link_load) return tplg->ops->link_load(tplg->comp, tplg->index, link, cfg); return 0; @@ -327,7 +327,7 @@ static int soc_tplg_dai_link_load(struct soc_tplg *tplg, /* tell the component driver that all firmware has been loaded in this request */ static void soc_tplg_complete(struct soc_tplg *tplg) { - if (tplg->comp && tplg->ops && tplg->ops->complete) + if (tplg->ops && tplg->ops->complete) tplg->ops->complete(tplg->comp); } @@ -684,7 +684,7 @@ EXPORT_SYMBOL_GPL(snd_soc_tplg_widget_bind_event); static int soc_tplg_init_kcontrol(struct soc_tplg *tplg, struct snd_kcontrol_new *k, struct snd_soc_tplg_ctl_hdr *hdr) { - if (tplg->comp && tplg->ops && tplg->ops->control_load) + if (tplg->ops && tplg->ops->control_load) return tplg->ops->control_load(tplg->comp, tplg->index, k, hdr); @@ -1174,7 +1174,7 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg, static int soc_tplg_add_route(struct soc_tplg *tplg, struct snd_soc_dapm_route *route) { - if (tplg->comp && tplg->ops && tplg->ops->dapm_route_load) + if (tplg->ops && tplg->ops->dapm_route_load) return tplg->ops->dapm_route_load(tplg->comp, tplg->index, route); @@ -2563,7 +2563,7 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg, } /* pass control to component driver for optional further init */ - if (tplg->comp && tplg->ops && tplg->ops->manifest) + if (tplg->ops && tplg->ops->manifest) ret = tplg->ops->manifest(tplg->comp, tplg->index, _manifest); if (!abi_match) /* free the duplicated one */ @@ -2735,6 +2735,10 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp, struct soc_tplg tplg; int ret; + /* component needs to exist to keep and reference data while parsing */ + if (!comp) + return -EINVAL; + /* setup parsing context */ memset(&tplg, 0, sizeof(tplg)); tplg.fw = fw; -- cgit v1.2.3 From 578194290d0bf85b087e73e35ea74574012cfd96 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Mar 2020 14:03:34 +0100 Subject: ASoC: wm_adsp: Use scnprintf() for the limited buffer output snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may point to the incorrect position. Use scnprintf() instead for fixing such potential errors. Signed-off-by: Takashi Iwai Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.de Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 2a9b610f6d43..9e5b6c4ac475 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1432,12 +1432,12 @@ static int wm_adsp_create_control(struct wm_adsp *dsp, subname = NULL; /* don't append subname */ break; case 2: - ret = snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s%c %.12s %x", dsp->name, *region_name, wm_adsp_fw_text[dsp->fw], alg_region->alg); break; default: - ret = snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %.12s %x", dsp->name, wm_adsp_fw_text[dsp->fw], alg_region->alg); break; -- cgit v1.2.3 From 5b7ddb86e61311f711eaa091dc3e9d8ccfc08e3a Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Fri, 13 Mar 2020 10:38:50 +0800 Subject: ASoC: rt5682: Revise the DAC1 volume setting The max volume of the DAC1 Playback Volume is 0dB. Signed-off-by: Oder Chiou Link: https://lore.kernel.org/r/20200313023850.28875-2-oder_chiou@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index ae6f6121bc1b..063dd338539d 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1146,7 +1146,7 @@ static void rt5682_jack_detect_handler(struct work_struct *work) static const struct snd_kcontrol_new rt5682_snd_controls[] = { /* DAC Digital Volume */ SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5682_DAC1_DIG_VOL, - RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 86, 0, dac_vol_tlv), + RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 87, 0, dac_vol_tlv), /* IN Boost Volume */ SOC_SINGLE_TLV("CBJ Boost Volume", RT5682_CBJ_BST_CTRL, -- cgit v1.2.3 From 1a0f2433d7380c957d5d29e60a2eeb03ca3afe21 Mon Sep 17 00:00:00 2001 From: Yong Zhi Date: Fri, 13 Mar 2020 10:55:26 -0500 Subject: ASoC: max98357a: Add ACPI HID MAX98360A Maxim MAX98360A audio amplifier is functionally identical to MAX98357A, add ACPI ID "MAX98360A" for driver reuse. Signed-off-by: Yong Zhi Link: https://lore.kernel.org/r/1584114926-29287-1-git-send-email-yong.zhi@intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98357a.c | 1 + 1 file changed, 1 insertion(+) (limited to 'sound') diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c index 16313b973eaa..eb3d8255ea6c 100644 --- a/sound/soc/codecs/max98357a.c +++ b/sound/soc/codecs/max98357a.c @@ -135,6 +135,7 @@ MODULE_DEVICE_TABLE(of, max98357a_device_id); #ifdef CONFIG_ACPI static const struct acpi_device_id max98357a_acpi_match[] = { { "MX98357A", 0 }, + { "MX98360A", 0 }, {}, }; MODULE_DEVICE_TABLE(acpi, max98357a_acpi_match); -- cgit v1.2.3