From b7a7723513dc89f83d6df13206df55d4dc26e825 Mon Sep 17 00:00:00 2001 From: Sander Eikelenboom Date: Fri, 2 May 2014 15:09:27 +0200 Subject: ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 131336d40492..c62a1659106d 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1501,9 +1501,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs, * The error should be lower than 2ms since the estimate relies * on two reads of a counter updated every ms. */ - if (printk_ratelimit() && - abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2) - dev_dbg(&subs->dev->dev, + if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2) + dev_dbg_ratelimited(&subs->dev->dev, "delay: estimated %d, actual %d\n", est_delay, subs->last_delay); -- cgit v1.2.3 From 1c53e7253ed8769a00afa0f06777d731dbe1ba6f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 May 2014 18:14:42 +0200 Subject: ALSA: usb-audio: Save mixer status only once at suspend The suspend callback of usb-audio driver may be called multiple times per suspend when multiple USB interfaces are bound to a single sound card instance. In such a case, it's superfluous to save the mixer values multiple times. This patch fixes it by checking the counter. Signed-off-by: Takashi Iwai --- sound/usb/card.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/card.c b/sound/usb/card.c index 893d5a1afc3c..e769d3977716 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -695,8 +695,9 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) chip->autosuspended = 1; } - list_for_each_entry(mixer, &chip->mixer_list, list) - snd_usb_mixer_suspend(mixer); + if (chip->num_suspended_intf == 1) + list_for_each_entry(mixer, &chip->mixer_list, list) + snd_usb_mixer_suspend(mixer); return 0; } -- cgit v1.2.3 From 1ee23fe07ee83a38ecee927e701f762888ada942 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 May 2014 18:17:06 +0200 Subject: ALSA: usb-audio: Fix deadlocks at resuming The recent addition of the USB audio mixer suspend/resume may lead to deadlocks when the driver tries to call usb_autopm_get_interface() recursively, since the function tries to sync with the finish of the other calls. For avoiding it, introduce a flag indicating the resume operation and avoids the recursive usb_autopm_get_interface() calls during the resume. Reported-and-tested-by: Bryan Quigley Signed-off-by: Takashi Iwai --- sound/usb/card.c | 7 +++++-- sound/usb/usbaudio.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'sound/usb') diff --git a/sound/usb/card.c b/sound/usb/card.c index e769d3977716..c3b5b7dca1c3 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -651,7 +651,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip) int err = -ENODEV; down_read(&chip->shutdown_rwsem); - if (chip->probing) + if (chip->probing && chip->in_pm) err = 0; else if (!chip->shutdown) err = usb_autopm_get_interface(chip->pm_intf); @@ -663,7 +663,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip) void snd_usb_autosuspend(struct snd_usb_audio *chip) { down_read(&chip->shutdown_rwsem); - if (!chip->shutdown && !chip->probing) + if (!chip->shutdown && !chip->probing && !chip->in_pm) usb_autopm_put_interface(chip->pm_intf); up_read(&chip->shutdown_rwsem); } @@ -712,6 +712,8 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) return 0; if (--chip->num_suspended_intf) return 0; + + chip->in_pm = 1; /* * ALSA leaves material resumption to user space * we just notify and restart the mixers @@ -727,6 +729,7 @@ static int __usb_audio_resume(struct usb_interface *intf, bool reset_resume) chip->autosuspended = 0; err_out: + chip->in_pm = 0; return err; } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 25c4c7e217de..91d0380431b4 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -40,6 +40,7 @@ struct snd_usb_audio { struct rw_semaphore shutdown_rwsem; unsigned int shutdown:1; unsigned int probing:1; + unsigned int in_pm:1; unsigned int autosuspended:1; unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */ -- cgit v1.2.3 From 7040b6d1febfdbd9c1595efb751d492cd2503f96 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 1 May 2014 12:20:22 +0200 Subject: ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick Reported-and-tested-by: Andrea Messa Cc: Signed-off-by: Takashi Iwai --- sound/usb/card.h | 1 + sound/usb/endpoint.c | 15 ++++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'sound/usb') diff --git a/sound/usb/card.h b/sound/usb/card.h index 9867ab866857..97acb906acc2 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -92,6 +92,7 @@ struct snd_usb_endpoint { unsigned int curframesize; /* current packet size in frames (for capture) */ unsigned int syncmaxsize; /* sync endpoint packet size */ unsigned int fill_max:1; /* fill max packet size always */ + unsigned int udh01_fb_quirk:1; /* corrupted feedback data */ unsigned int datainterval; /* log_2 of data packet interval */ unsigned int syncinterval; /* P for adaptive mode, 0 otherwise */ unsigned char silence_value; diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index e70a87e0d9fe..289f582c9130 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -471,6 +471,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, ep->syncinterval = 3; ep->syncmaxsize = le16_to_cpu(get_endpoint(alts, 1)->wMaxPacketSize); + + if (chip->usb_id == USB_ID(0x0644, 0x8038) /* TEAC UD-H01 */ && + ep->syncmaxsize == 4) + ep->udh01_fb_quirk = 1; } list_add_tail(&ep->list, &chip->ep_list); @@ -1105,7 +1109,16 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, if (f == 0) return; - if (unlikely(ep->freqshift == INT_MIN)) { + if (unlikely(sender->udh01_fb_quirk)) { + /* + * The TEAC UD-H01 firmware sometimes changes the feedback value + * by +/- 0x1.0000. + */ + if (f < ep->freqn - 0x8000) + f += 0x10000; + else if (f > ep->freqn + 0x8000) + f -= 0x10000; + } else if (unlikely(ep->freqshift == INT_MIN)) { /* * The first time we see a feedback value, determine its format * by shifting it left or right until it matches the nominal -- cgit v1.2.3