From a7e2e735dcf98717150d3c8eaa731de8038af05a Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Thu, 8 Jan 2009 21:03:55 +0000 Subject: ASoC: machine driver for Toshiba e750 This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'sound/soc/pxa/Kconfig') diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f82e10699471..b9b1a3f5d673 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). +config SND_PXA2XX_SOC_E750 + tristate "SoC AC97 Audio support for e750" + depends on SND_PXA2XX_SOC && MACH_E750 + select SND_SOC_WM9705 + select SND_PXA2XX_SOC_AC97 + help + Say Y if you want to add support for SoC audio on the + toshiba e750 PDA + config SND_PXA2XX_SOC_E800 tristate "SoC AC97 Audio support for e800" depends on SND_PXA2XX_SOC && MACH_E800 -- cgit v1.2.3 From 28796eaf806502b9bd86cbacf8edbc14c80c14b0 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Sat, 17 Jan 2009 15:11:06 +0000 Subject: ASoC: machine support for Toshiba e740 PDA This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- arch/arm/mach-pxa/e740.c | 5 + arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 + sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/e740_wm9705.c | 213 ++++++++++++++++++++++++++ 5 files changed, 234 insertions(+) create mode 100644 sound/soc/pxa/e740_wm9705.c (limited to 'sound/soc/pxa/Kconfig') diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0b..a6fff782e7a8 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index 6d6e4d8fa4c1..f3e5509820d7 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,11 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + /* e750 audio control GPIOs */ #define GPIO_E750_HP_AMP_OFF 4 #define GPIO_E750_SPK_AMP_OFF 7 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index b9b1a3f5d673..958ac3fe15d1 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). +config SND_PXA2XX_SOC_E740 + tristate "SoC AC97 Audio support for e740" + depends on SND_PXA2XX_SOC && MACH_E740 + select SND_SOC_WM9705 + select SND_PXA2XX_SOC_AC97 + help + Say Y if you want to add support for SoC audio on the + toshiba e740 PDA + config SND_PXA2XX_SOC_E750 tristate "SoC AC97 Audio support for e750" depends on SND_PXA2XX_SOC && MACH_E750 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index c7d4cceeed92..97a51a8c936c 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o snd-soc-corgi-objs := corgi.o snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o +snd-soc-e740-objs := e740_wm9705.o snd-soc-e750-objs := e750_wm9705.o snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o @@ -23,6 +24,7 @@ snd-soc-zylonite-objs := zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o +obj-$(CONFIG_SND_PXA2XX_SOC_E740) += snd-soc-e740.o obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c new file mode 100644 index 000000000000..ac3617651734 --- /dev/null +++ b/sound/soc/pxa/e740_wm9705.c @@ -0,0 +1,213 @@ +/* + * e740-wm9705.c -- SoC audio for e740 + * + * Copyright 2007 (c) Ian Molton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 ONLY. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "../codecs/wm9705.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" + + +#define E740_AUDIO_OUT 1 +#define E740_AUDIO_IN 2 + +static int e740_audio_power; + +static void e740_sync_audio_power(int status) +{ + gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status); + gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0); + gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0); +} + +static int e740_mic_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_IN; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_IN; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static int e740_output_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_OUT; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_OUT; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static const struct snd_soc_dapm_widget e740_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_PGA_E("Output Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_output_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("Mic Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_mic_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Output Amp", NULL, "LOUT"}, + {"Output Amp", NULL, "ROUT"}, + {"Output Amp", NULL, "MONOOUT"}, + + {"Speaker", NULL, "Output Amp"}, + {"Headphone Jack", NULL, "Output Amp"}, + + {"MIC1", NULL, "Mic Amp"}, + {"Mic Amp", NULL, "Mic (Internal)"}, +}; + +static int e740_ac97_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_nc_pin(codec, "HPOUTL"); + snd_soc_dapm_nc_pin(codec, "HPOUTR"); + snd_soc_dapm_nc_pin(codec, "PHONE"); + snd_soc_dapm_nc_pin(codec, "LINEINL"); + snd_soc_dapm_nc_pin(codec, "LINEINR"); + snd_soc_dapm_nc_pin(codec, "CDINL"); + snd_soc_dapm_nc_pin(codec, "CDINR"); + snd_soc_dapm_nc_pin(codec, "PCBEEP"); + snd_soc_dapm_nc_pin(codec, "MIC2"); + + snd_soc_dapm_new_controls(codec, e740_dapm_widgets, + ARRAY_SIZE(e740_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link e740_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI], + .init = e740_ac97_init, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX], + }, +}; + +static struct snd_soc_card e740 = { + .name = "Toshiba e740", + .platform = &pxa2xx_soc_platform, + .dai_link = e740_dai, + .num_links = ARRAY_SIZE(e740_dai), +}; + +static struct snd_soc_device e740_snd_devdata = { + .card = &e740, + .codec_dev = &soc_codec_dev_wm9705, +}; + +static struct platform_device *e740_snd_device; + +static int __init e740_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + ret = gpio_request(GPIO_E740_MIC_ON, "Mic amp"); + if (ret) + return ret; + + ret = gpio_request(GPIO_E740_AMP_ON, "Output amp"); + if (ret) + goto free_mic_amp_gpio; + + ret = gpio_request(GPIO_E740_WM9705_nAVDD2, "Audio power"); + if (ret) + goto free_op_amp_gpio; + + /* Disable audio */ + ret = gpio_direction_output(GPIO_E740_MIC_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_AMP_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_WM9705_nAVDD2, 1); + if (ret) + goto free_apwr_gpio; + + e740_snd_device = platform_device_alloc("soc-audio", -1); + if (!e740_snd_device) { + ret = -ENOMEM; + goto free_apwr_gpio; + } + + platform_set_drvdata(e740_snd_device, &e740_snd_devdata); + e740_snd_devdata.dev = &e740_snd_device->dev; + ret = platform_device_add(e740_snd_device); + + if (!ret) + return 0; + +/* Fail gracefully */ + platform_device_put(e740_snd_device); +free_apwr_gpio: + gpio_free(GPIO_E740_WM9705_nAVDD2); +free_op_amp_gpio: + gpio_free(GPIO_E740_AMP_ON); +free_mic_amp_gpio: + gpio_free(GPIO_E740_MIC_ON); + + return ret; +} + +static void __exit e740_exit(void) +{ + platform_device_unregister(e740_snd_device); +} + +module_init(e740_init); +module_exit(e740_exit); + +/* Module information */ +MODULE_AUTHOR("Ian Molton "); +MODULE_DESCRIPTION("ALSA SoC driver for e740"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 8f0dc655f9efa3fc81b8cdaf5aa1f2779f8db46d Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 7 Feb 2009 14:01:58 +0100 Subject: ASoC: Add initial support of Mitac mioa701 device SoC. This machine driver enables sound functions on Mitac mio a701 smartphone. Build upon ASoC v1, it handles : - rear speaker - front speaker - microphone - GSM A global "Mio Mode" switch is not yet provided to cope with audio path setup. As balance on audio chip line is no more assured, an incorrect setup can produce a lot of heat and even fry the battery behind the wm9713 and the speaker amplifier. It doesn't cope with : - headset jack - mio master mode - master volume control This driver is backported from ASoc v2, and amputated from scenario setups and master volume control. [Minor mods for terminology in comments -- broonie] Signed-off-by: Robert Jarzmik Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 9 ++ sound/soc/pxa/Makefile | 2 + sound/soc/pxa/mioa701_wm9713.c | 250 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 261 insertions(+) create mode 100644 sound/soc/pxa/mioa701_wm9713.c (limited to 'sound/soc/pxa/Kconfig') diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 958ac3fe15d1..5998ab366e83 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -115,3 +115,12 @@ config SND_SOC_ZYLONITE help Say Y if you want to add support for SoC audio on the Marvell Zylonite reference platform. + +config SND_PXA2XX_SOC_MIOA701 + tristate "SoC Audio support for MIO A701" + depends on SND_PXA2XX_SOC && MACH_MIOA701 + select SND_PXA2XX_SOC_AC97 + select SND_SOC_WM9713 + help + Say Y if you want to add support for SoC audio on the + MIO A701. diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 97a51a8c936c..8ed881c5e5cc 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -20,6 +20,7 @@ snd-soc-spitz-objs := spitz.o snd-soc-em-x270-objs := em-x270.o snd-soc-palm27x-objs := palm27x.o snd-soc-zylonite-objs := zylonite.o +snd-soc-mioa701-objs := mioa701_wm9713.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o @@ -30,4 +31,5 @@ obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o +obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c new file mode 100644 index 000000000000..19eda8bbfdaf --- /dev/null +++ b/sound/soc/pxa/mioa701_wm9713.c @@ -0,0 +1,250 @@ +/* + * Handles the Mitac mioa701 SoC system + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation in version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a little schema of the sound interconnections : + * + * Sagem X200 Wolfson WM9713 + * +--------+ +-------------------+ Rear Speaker + * | | | | /-+ + * | +--->----->---+MONOIN SPKL+--->----+-+ | + * | GSM | | | | | | + * | +--->----->---+PCBEEP SPKR+--->----+-+ | + * | CHIP | | | \-+ + * | +---<-----<---+MONO | + * | | | | Front Speaker + * +--------+ | | /-+ + * | HPL+--->----+-+ | + * | | | | | + * | OUT3+--->----+-+ | + * | | \-+ + * | | + * | | Front Micro + * | | + + * | MIC1+-----<--+o+ + * | | + + * +-------------------+ --- + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" +#include "../codecs/wm9713.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#define AC97_GPIO_PULL 0x58 + +/* Use GPIO8 for rear speaker amplifier */ +static int rear_amp_power(struct snd_soc_codec *codec, int power) +{ + unsigned short reg; + + if (power) { + reg = snd_soc_read(codec, AC97_GPIO_CFG); + snd_soc_write(codec, AC97_GPIO_CFG, reg | 0x0100); + reg = snd_soc_read(codec, AC97_GPIO_PULL); + snd_soc_write(codec, AC97_GPIO_PULL, reg | (1<<15)); + } else { + reg = snd_soc_read(codec, AC97_GPIO_CFG); + snd_soc_write(codec, AC97_GPIO_CFG, reg & ~0x0100); + reg = snd_soc_read(codec, AC97_GPIO_PULL); + snd_soc_write(codec, AC97_GPIO_PULL, reg & ~(1<<15)); + } + + return 0; +} + +static int rear_amp_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *kctl, int event) +{ + struct snd_soc_codec *codec = widget->codec; + + return rear_amp_power(codec, SND_SOC_DAPM_EVENT_ON(event)); +} + +/* mioa701 machine dapm widgets */ +static const struct snd_soc_dapm_widget mioa701_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Front Speaker", NULL), + SND_SOC_DAPM_SPK("Rear Speaker", rear_amp_event), + SND_SOC_DAPM_MIC("Headset", NULL), + SND_SOC_DAPM_LINE("GSM Line Out", NULL), + SND_SOC_DAPM_LINE("GSM Line In", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Front Mic", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* Call Mic */ + {"Mic Bias", NULL, "Front Mic"}, + {"MIC1", NULL, "Mic Bias"}, + + /* Headset Mic */ + {"LINEL", NULL, "Headset Mic"}, + {"LINER", NULL, "Headset Mic"}, + + /* GSM Module */ + {"MONOIN", NULL, "GSM Line Out"}, + {"PCBEEP", NULL, "GSM Line Out"}, + {"GSM Line In", NULL, "MONO"}, + + /* headphone connected to HPL, HPR */ + {"Headset", NULL, "HPL"}, + {"Headset", NULL, "HPR"}, + + /* front speaker connected to HPL, OUT3 */ + {"Front Speaker", NULL, "HPL"}, + {"Front Speaker", NULL, "OUT3"}, + + /* rear speaker connected to SPKL, SPKR */ + {"Rear Speaker", NULL, "SPKL"}, + {"Rear Speaker", NULL, "SPKR"}, +}; + +static int mioa701_wm9713_init(struct snd_soc_codec *codec) +{ + unsigned short reg; + + /* Add mioa701 specific widgets */ + snd_soc_dapm_new_controls(codec, ARRAY_AND_SIZE(mioa701_dapm_widgets)); + + /* Set up mioa701 specific audio path audio_mapnects */ + snd_soc_dapm_add_routes(codec, ARRAY_AND_SIZE(audio_map)); + + /* Prepare GPIO8 for rear speaker amplifier */ + reg = codec->read(codec, AC97_GPIO_CFG); + codec->write(codec, AC97_GPIO_CFG, reg | 0x0100); + + /* Prepare MIC input */ + reg = codec->read(codec, AC97_3D_CONTROL); + codec->write(codec, AC97_3D_CONTROL, reg | 0xc000); + + snd_soc_dapm_enable_pin(codec, "Front Speaker"); + snd_soc_dapm_enable_pin(codec, "Rear Speaker"); + snd_soc_dapm_enable_pin(codec, "Front Mic"); + snd_soc_dapm_enable_pin(codec, "GSM Line In"); + snd_soc_dapm_enable_pin(codec, "GSM Line Out"); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_ops mioa701_ops; + +static struct snd_soc_dai_link mioa701_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_HIFI], + .init = mioa701_wm9713_init, + .ops = &mioa701_ops, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9713_dai[WM9713_DAI_AC97_AUX], + .ops = &mioa701_ops, + }, +}; + +static struct snd_soc_card mioa701 = { + .name = "MioA701", + .platform = &pxa2xx_soc_platform, + .dai_link = mioa701_dai, + .num_links = ARRAY_SIZE(mioa701_dai), +}; + +static struct snd_soc_device mioa701_snd_devdata = { + .card = &mioa701, + .codec_dev = &soc_codec_dev_wm9713, +}; + +static struct platform_device *mioa701_snd_device; + +static int mioa701_wm9713_probe(struct platform_device *pdev) +{ + int ret; + + if (!machine_is_mioa701()) + return -ENODEV; + + dev_warn(&pdev->dev, "Be warned that incorrect mixers/muxes setup will" + "lead to overheating and possible destruction of your device." + "Do not use without a good knowledge of mio's board design!\n"); + + mioa701_snd_device = platform_device_alloc("soc-audio", -1); + if (!mioa701_snd_device) + return -ENOMEM; + + platform_set_drvdata(mioa701_snd_device, &mioa701_snd_devdata); + mioa701_snd_devdata.dev = &mioa701_snd_device->dev; + + ret = platform_device_add(mioa701_snd_device); + if (!ret) + return 0; + + platform_device_put(mioa701_snd_device); + return ret; +} + +static int __devexit mioa701_wm9713_remove(struct platform_device *pdev) +{ + platform_device_unregister(mioa701_snd_device); + return 0; +} + +static struct platform_driver mioa701_wm9713_driver = { + .probe = mioa701_wm9713_probe, + .remove = __devexit_p(mioa701_wm9713_remove), + .driver = { + .name = "mioa701-wm9713", + .owner = THIS_MODULE, + }, +}; + +static int __init mioa701_asoc_init(void) +{ + return platform_driver_register(&mioa701_wm9713_driver); +} + +static void __exit mioa701_asoc_exit(void) +{ + platform_driver_unregister(&mioa701_wm9713_driver); +} + +module_init(mioa701_asoc_init); +module_exit(mioa701_asoc_exit); + +/* Module information */ +MODULE_AUTHOR("Robert Jarzmik (rjarzmik@free.fr)"); +MODULE_DESCRIPTION("ALSA SoC WM9713 MIO A701"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3