From e7e69265b6269763799a5de9c263fbbce32cd3a3 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 8 Sep 2014 22:48:03 +0530 Subject: sound: pci: au88x0: printk replacement as pr_* macros are more preffered over printk, so printk replaced with corresponding pr_* macros. this patch will generate warning from checkpatch as it only did printk replacement and didnot fixed other style issues. Signed-off-by: Sudip Mukherjee Signed-off-by: Takashi Iwai --- sound/pci/au88x0/au88x0.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'sound/pci/au88x0/au88x0.c') diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c index afb1b44b741e..21ce31f636bc 100644 --- a/sound/pci/au88x0/au88x0.c +++ b/sound/pci/au88x0/au88x0.c @@ -48,10 +48,10 @@ static void vortex_fix_latency(struct pci_dev *vortex) { int rc; if (!(rc = pci_write_config_byte(vortex, 0x40, 0xff))) { - printk(KERN_INFO CARD_NAME + pr_info( CARD_NAME ": vortex latency is 0xff\n"); } else { - printk(KERN_WARNING CARD_NAME + pr_warn( CARD_NAME ": could not set vortex latency: pci error 0x%x\n", rc); } } @@ -70,10 +70,10 @@ static void vortex_fix_agp_bridge(struct pci_dev *via) if (!(rc = pci_read_config_byte(via, 0x42, &value)) && ((value & 0x10) || !(rc = pci_write_config_byte(via, 0x42, value | 0x10)))) { - printk(KERN_INFO CARD_NAME + pr_info( CARD_NAME ": bridge config is 0x%x\n", value | 0x10); } else { - printk(KERN_WARNING CARD_NAME + pr_warn( CARD_NAME ": could not set vortex latency: pci error 0x%x\n", rc); } } @@ -97,7 +97,7 @@ static void snd_vortex_workaround(struct pci_dev *vortex, int fix) PCI_DEVICE_ID_AMD_FE_GATE_7007, NULL); } if (via) { - printk(KERN_INFO CARD_NAME ": Activating latency workaround...\n"); + pr_info( CARD_NAME ": Activating latency workaround...\n"); vortex_fix_latency(vortex); vortex_fix_agp_bridge(via); } @@ -153,7 +153,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) return err; if (pci_set_dma_mask(pci, DMA_BIT_MASK(32)) < 0 || pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)) < 0) { - printk(KERN_ERR "error to set DMA mask\n"); + pr_err( "error to set DMA mask\n"); pci_disable_device(pci); return -ENXIO; } @@ -182,7 +182,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) chip->mmio = pci_ioremap_bar(pci, 0); if (!chip->mmio) { - printk(KERN_ERR "MMIO area remap failed.\n"); + pr_err( "MMIO area remap failed.\n"); err = -ENOMEM; goto ioremap_out; } @@ -191,14 +191,14 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip) * This must be done before we do request_irq otherwise we can get spurious * interrupts that we do not handle properly and make a mess of things */ if ((err = vortex_core_init(chip)) != 0) { - printk(KERN_ERR "hw core init failed\n"); + pr_err( "hw core init failed\n"); goto core_out; } if ((err = request_irq(pci->irq, vortex_interrupt, IRQF_SHARED, KBUILD_MODNAME, chip)) != 0) { - printk(KERN_ERR "cannot grab irq\n"); + pr_err( "cannot grab irq\n"); goto irq_out; } chip->irq = pci->irq; @@ -342,10 +342,10 @@ snd_vortex_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) chip->rev = pci->revision; #ifdef CHIP_AU8830 if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) { - printk(KERN_ALERT + pr_alert( "vortex: The revision (%x) of your card has not been seen before.\n", chip->rev); - printk(KERN_ALERT + pr_alert( "vortex: Please email the results of 'lspci -vv' to openvortex-dev@nongnu.org.\n"); snd_card_free(card); err = -ENODEV; -- cgit v1.2.3