From 182d919b84902eece162c63ed3d476c8016b4197 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Feb 2015 23:47:31 +0000 Subject: FS-Cache: Count culled objects and objects rejected due to lack of space Count the number of objects that get culled by the cache backend and the number of objects that the cache backend declines to instantiate due to lack of space in the cache. These numbers are made available through /proc/fs/fscache/stats Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- include/linux/fscache-cache.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 771484993ca7..c9dafdaf3347 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -371,6 +371,7 @@ struct fscache_object { #define FSCACHE_OBJECT_IS_LOOKED_UP 4 /* T if object has been looked up */ #define FSCACHE_OBJECT_IS_AVAILABLE 5 /* T if object has become active */ #define FSCACHE_OBJECT_RETIRED 6 /* T if object was retired on relinquishment */ +#define FSCACHE_OBJECT_KILLED_BY_CACHE 7 /* T if object was killed by the cache */ struct list_head cache_link; /* link in cache->object_list */ struct hlist_node cookie_link; /* link in cookie->backing_objects */ @@ -551,4 +552,15 @@ extern enum fscache_checkaux fscache_check_aux(struct fscache_object *object, const void *data, uint16_t datalen); +extern void fscache_object_retrying_stale(struct fscache_object *object); + +enum fscache_why_object_killed { + FSCACHE_OBJECT_IS_STALE, + FSCACHE_OBJECT_NO_SPACE, + FSCACHE_OBJECT_WAS_RETIRED, + FSCACHE_OBJECT_WAS_CULLED, +}; +extern void fscache_object_mark_killed(struct fscache_object *object, + enum fscache_why_object_killed why); + #endif /* _LINUX_FSCACHE_CACHE_H */ -- cgit v1.2.3 From 30ceec6284129662efc3a1e7675b2bd857a046fe Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 24 Feb 2015 10:05:27 +0000 Subject: FS-Cache: When submitting an op, cancel it if the target object is dying When submitting an operation, prefer to cancel the operation immediately rather than queuing it for later processing if the object is marked as dying (ie. the object state machine has reached the KILL_OBJECT state). Whilst we're at it, change the series of related test_bit() calls into a READ_ONCE() and bitwise-AND operators to reduce the number of load instructions (test_bit() has a volatile address). Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- fs/fscache/operation.c | 47 +++++++++++++++++++++++++++---------------- include/linux/fscache-cache.h | 9 +++++++-- 2 files changed, 37 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 68ead8482617..dec6defe3be3 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -120,6 +120,8 @@ static void fscache_report_unexpected_submission(struct fscache_object *object, int fscache_submit_exclusive_op(struct fscache_object *object, struct fscache_operation *op) { + const struct fscache_state *ostate; + unsigned long flags; int ret; _enter("{OBJ%x OP%x},", object->debug_id, op->debug_id); @@ -132,8 +134,19 @@ int fscache_submit_exclusive_op(struct fscache_object *object, ASSERTCMP(object->n_ops, >=, object->n_exclusive); ASSERT(list_empty(&op->pend_link)); + ostate = object->state; + smp_rmb(); + op->state = FSCACHE_OP_ST_PENDING; - if (fscache_object_is_active(object)) { + flags = READ_ONCE(object->flags); + if (unlikely(!(flags & BIT(FSCACHE_OBJECT_IS_LIVE)))) { + fscache_stat(&fscache_n_op_rejected); + op->state = FSCACHE_OP_ST_CANCELLED; + ret = -ENOBUFS; + } else if (unlikely(fscache_cache_is_broken(object))) { + op->state = FSCACHE_OP_ST_CANCELLED; + ret = -EIO; + } else if (flags & BIT(FSCACHE_OBJECT_IS_AVAILABLE)) { op->object = object; object->n_ops++; object->n_exclusive++; /* reads and writes must wait */ @@ -155,7 +168,7 @@ int fscache_submit_exclusive_op(struct fscache_object *object, /* need to issue a new write op after this */ clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags); ret = 0; - } else if (test_bit(FSCACHE_OBJECT_IS_LOOKED_UP, &object->flags)) { + } else if (flags & BIT(FSCACHE_OBJECT_IS_LOOKED_UP)) { op->object = object; object->n_ops++; object->n_exclusive++; /* reads and writes must wait */ @@ -164,11 +177,9 @@ int fscache_submit_exclusive_op(struct fscache_object *object, fscache_stat(&fscache_n_op_pend); ret = 0; } else { - /* If we're in any other state, there must have been an I/O - * error of some nature. - */ - ASSERT(test_bit(FSCACHE_IOERROR, &object->cache->flags)); - ret = -EIO; + fscache_report_unexpected_submission(object, op, ostate); + op->state = FSCACHE_OP_ST_CANCELLED; + ret = -ENOBUFS; } spin_unlock(&object->lock); @@ -187,6 +198,7 @@ int fscache_submit_op(struct fscache_object *object, struct fscache_operation *op) { const struct fscache_state *ostate; + unsigned long flags; int ret; _enter("{OBJ%x OP%x},{%u}", @@ -204,7 +216,15 @@ int fscache_submit_op(struct fscache_object *object, smp_rmb(); op->state = FSCACHE_OP_ST_PENDING; - if (fscache_object_is_active(object)) { + flags = READ_ONCE(object->flags); + if (unlikely(!(flags & BIT(FSCACHE_OBJECT_IS_LIVE)))) { + fscache_stat(&fscache_n_op_rejected); + op->state = FSCACHE_OP_ST_CANCELLED; + ret = -ENOBUFS; + } else if (unlikely(fscache_cache_is_broken(object))) { + op->state = FSCACHE_OP_ST_CANCELLED; + ret = -EIO; + } else if (flags & BIT(FSCACHE_OBJECT_IS_AVAILABLE)) { op->object = object; object->n_ops++; @@ -222,25 +242,18 @@ int fscache_submit_op(struct fscache_object *object, fscache_run_op(object, op); } ret = 0; - } else if (test_bit(FSCACHE_OBJECT_IS_LOOKED_UP, &object->flags)) { + } else if (flags & BIT(FSCACHE_OBJECT_IS_LOOKED_UP)) { op->object = object; object->n_ops++; atomic_inc(&op->usage); list_add_tail(&op->pend_link, &object->pending_ops); fscache_stat(&fscache_n_op_pend); ret = 0; - } else if (fscache_object_is_dying(object)) { - fscache_stat(&fscache_n_op_rejected); - op->state = FSCACHE_OP_ST_CANCELLED; - ret = -ENOBUFS; - } else if (!test_bit(FSCACHE_IOERROR, &object->cache->flags)) { + } else { fscache_report_unexpected_submission(object, op, ostate); ASSERT(!fscache_object_is_active(object)); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; - } else { - op->state = FSCACHE_OP_ST_CANCELLED; - ret = -ENOBUFS; } spin_unlock(&object->lock); diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index c9dafdaf3347..2e83a141e465 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -411,17 +411,22 @@ static inline bool fscache_object_is_available(struct fscache_object *object) return test_bit(FSCACHE_OBJECT_IS_AVAILABLE, &object->flags); } +static inline bool fscache_cache_is_broken(struct fscache_object *object) +{ + return test_bit(FSCACHE_IOERROR, &object->cache->flags); +} + static inline bool fscache_object_is_active(struct fscache_object *object) { return fscache_object_is_available(object) && fscache_object_is_live(object) && - !test_bit(FSCACHE_IOERROR, &object->cache->flags); + !fscache_cache_is_broken(object); } static inline bool fscache_object_is_dead(struct fscache_object *object) { return fscache_object_is_dying(object) && - test_bit(FSCACHE_IOERROR, &object->cache->flags); + fscache_cache_is_broken(object); } /** -- cgit v1.2.3 From 87021526300f1a292dd966e141e183630ac95317 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 24 Feb 2015 10:52:51 +0000 Subject: FS-Cache: fscache_object_is_dead() has wrong logic, kill it fscache_object_is_dead() returns true only if the object is marked dead and the cache got an I/O error. This should be a logical OR instead. Since two of the callers got split up into handling for separate subcases, expand the other callers and kill the function. This is probably the right thing to do anyway since one of the subcases isn't about the object at all, but rather about the cache. Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- fs/fscache/cookie.c | 3 ++- fs/fscache/page.c | 6 ++++-- include/linux/fscache-cache.h | 6 ------ 3 files changed, 6 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 89acec742e0b..8de22164f5fb 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -327,7 +327,8 @@ static int fscache_alloc_object(struct fscache_cache *cache, object_already_extant: ret = -ENOBUFS; - if (fscache_object_is_dead(object)) { + if (fscache_object_is_dying(object) || + fscache_cache_is_broken(object)) { spin_unlock(&cookie->lock); goto error; } diff --git a/fs/fscache/page.c b/fs/fscache/page.c index de33b3fccca6..d0805e31361c 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -377,11 +377,13 @@ check_if_dead: _leave(" = -ENOBUFS [cancelled]"); return -ENOBUFS; } - if (unlikely(fscache_object_is_dead(object))) { - pr_err("%s() = -ENOBUFS [obj dead %d]\n", __func__, op->state); + if (unlikely(fscache_object_is_dying(object) || + fscache_cache_is_broken(object))) { + enum fscache_operation_state state = op->state; fscache_cancel_op(op, do_cancel); if (stat_object_dead) fscache_stat(stat_object_dead); + _leave(" = -ENOBUFS [obj dead %d]", state); return -ENOBUFS; } return 0; diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 2e83a141e465..ca3d550da11e 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -423,12 +423,6 @@ static inline bool fscache_object_is_active(struct fscache_object *object) !fscache_cache_is_broken(object); } -static inline bool fscache_object_is_dead(struct fscache_object *object) -{ - return fscache_object_is_dying(object) && - fscache_cache_is_broken(object); -} - /** * fscache_object_destroyed - Note destruction of an object in a cache * @cache: The cache from which the object came -- cgit v1.2.3 From 1339ec98e32b4bc8efb6fbb71c006a465130aaba Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 25 Feb 2015 13:26:39 +0000 Subject: FS-Cache: Out of line fscache_operation_init() Out of line fscache_operation_init() so that it can access internal FS-Cache features, such as stats, in a later commit. Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- fs/fscache/operation.c | 22 ++++++++++++++++++++++ include/linux/fscache-cache.h | 24 +++--------------------- 2 files changed, 25 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 67594a8d791a..61a6e78b85fa 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -20,6 +20,28 @@ atomic_t fscache_op_debug_id; EXPORT_SYMBOL(fscache_op_debug_id); +/** + * fscache_operation_init - Do basic initialisation of an operation + * @op: The operation to initialise + * @release: The release function to assign + * + * Do basic initialisation of an operation. The caller must still set flags, + * object and processor if needed. + */ +void fscache_operation_init(struct fscache_operation *op, + fscache_operation_processor_t processor, + fscache_operation_release_t release) +{ + INIT_WORK(&op->work, fscache_op_work_func); + atomic_set(&op->usage, 1); + op->state = FSCACHE_OP_ST_INITIALISED; + op->debug_id = atomic_inc_return(&fscache_op_debug_id); + op->processor = processor; + op->release = release; + INIT_LIST_HEAD(&op->pend_link); +} +EXPORT_SYMBOL(fscache_operation_init); + /** * fscache_enqueue_operation - Enqueue an operation for processing * @op: The operation to enqueue diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index ca3d550da11e..0e26d49972e3 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -119,27 +119,9 @@ extern void fscache_op_work_func(struct work_struct *work); extern void fscache_enqueue_operation(struct fscache_operation *); extern void fscache_op_complete(struct fscache_operation *, bool); extern void fscache_put_operation(struct fscache_operation *); - -/** - * fscache_operation_init - Do basic initialisation of an operation - * @op: The operation to initialise - * @release: The release function to assign - * - * Do basic initialisation of an operation. The caller must still set flags, - * object and processor if needed. - */ -static inline void fscache_operation_init(struct fscache_operation *op, - fscache_operation_processor_t processor, - fscache_operation_release_t release) -{ - INIT_WORK(&op->work, fscache_op_work_func); - atomic_set(&op->usage, 1); - op->state = FSCACHE_OP_ST_INITIALISED; - op->debug_id = atomic_inc_return(&fscache_op_debug_id); - op->processor = processor; - op->release = release; - INIT_LIST_HEAD(&op->pend_link); -} +extern void fscache_operation_init(struct fscache_operation *, + fscache_operation_processor_t, + fscache_operation_release_t); /* * data read operation -- cgit v1.2.3 From d3b97ca4a99e4e6c78f5a21c968eadf5c8ba9971 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 24 Feb 2015 10:05:29 +0000 Subject: FS-Cache: The operation cancellation method needs calling in more places Any time an incomplete operation is cancelled, the operation cancellation function needs to be called to clean up. This is currently being passed directly to some of the functions that might want to call it, but not all. Instead, pass the cancellation method pointer to the fscache_operation_init() and have that cache it in the operation struct. Further, plug in a dummy cancellation handler if the caller declines to set one as this allows us to call the function unconditionally (the extra overhead isn't worth bothering about as we don't expect to be calling this typically). The cancellation method must thence be called everywhere the CANCELLED state is set. Note that we call it *before* setting the CANCELLED state such that the method can use the old state value to guide its operation. fscache_do_cancel_retrieval() needs moving higher up in the sources so that the init function can use it now. Without this, the following oops may be seen: FS-Cache: Assertion failed FS-Cache: 3 == 0 is false ------------[ cut here ]------------ kernel BUG at ../fs/fscache/page.c:261! ... RIP: 0010:[] fscache_release_retrieval_op+0x77/0x100 [] fscache_put_operation+0x114/0x2da [] __fscache_read_or_alloc_pages+0x358/0x3b3 [] __nfs_readpages_from_fscache+0x59/0xbf [nfs] [] nfs_readpages+0x10c/0x185 [nfs] [] ? alloc_pages_current+0x119/0x13e [] ? __page_cache_alloc+0xfb/0x10a [] __do_page_cache_readahead+0x188/0x22c [] ondemand_readahead+0x29e/0x2af [] page_cache_sync_readahead+0x38/0x3a [] generic_file_read_iter+0x1a2/0x55a [] ? nfs_revalidate_mapping+0xd6/0x288 [nfs] [] nfs_file_read+0x49/0x70 [nfs] [] new_sync_read+0x78/0x9c [] __vfs_read+0x13/0x38 [] vfs_read+0x95/0x121 [] SyS_read+0x4c/0x8a [] system_call_fastpath+0x12/0x17 The assertion is showing that the remaining number of pages (n_pages) is not 0 when the operation is being released. Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- fs/fscache/cookie.c | 5 ++--- fs/fscache/internal.h | 7 ++----- fs/fscache/object.c | 3 ++- fs/fscache/operation.c | 31 ++++++++++++++++++++++------- fs/fscache/page.c | 46 +++++++++++++++++++++---------------------- include/linux/fscache-cache.h | 5 +++++ 6 files changed, 57 insertions(+), 40 deletions(-) (limited to 'include') diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 8de22164f5fb..d403c69bee08 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -672,7 +672,7 @@ int __fscache_check_consistency(struct fscache_cookie *cookie) if (!op) return -ENOMEM; - fscache_operation_init(op, NULL, NULL); + fscache_operation_init(op, NULL, NULL, NULL); op->flags = FSCACHE_OP_MYTHREAD | (1 << FSCACHE_OP_WAITING) | (1 << FSCACHE_OP_UNUSE_COOKIE); @@ -696,8 +696,7 @@ int __fscache_check_consistency(struct fscache_cookie *cookie) /* the work queue now carries its own ref on the object */ spin_unlock(&cookie->lock); - ret = fscache_wait_for_operation_activation(object, op, - NULL, NULL, NULL); + ret = fscache_wait_for_operation_activation(object, op, NULL, NULL); if (ret == 0) { /* ask the cache to honour the operation */ ret = object->cache->ops->check_consistency(op); diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index a63225116db6..97ec45110957 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -124,9 +124,7 @@ extern int fscache_submit_exclusive_op(struct fscache_object *, struct fscache_operation *); extern int fscache_submit_op(struct fscache_object *, struct fscache_operation *); -extern int fscache_cancel_op(struct fscache_operation *, - void (*)(struct fscache_operation *), - bool); +extern int fscache_cancel_op(struct fscache_operation *, bool); extern void fscache_cancel_all_ops(struct fscache_object *); extern void fscache_abort_object(struct fscache_object *); extern void fscache_start_operations(struct fscache_object *); @@ -139,8 +137,7 @@ extern int fscache_wait_for_deferred_lookup(struct fscache_cookie *); extern int fscache_wait_for_operation_activation(struct fscache_object *, struct fscache_operation *, atomic_t *, - atomic_t *, - void (*)(struct fscache_operation *)); + atomic_t *); extern void fscache_invalidate_writes(struct fscache_cookie *); /* diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 40049f7505f0..9e792e30f4db 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -961,7 +961,8 @@ static const struct fscache_state *_fscache_invalidate_object(struct fscache_obj if (!op) goto nomem; - fscache_operation_init(op, object->cache->ops->invalidate_object, NULL); + fscache_operation_init(op, object->cache->ops->invalidate_object, + NULL, NULL); op->flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_EXCLUSIVE) | (1 << FSCACHE_OP_UNUSE_COOKIE); diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index c76c09730768..57d4abb68656 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -20,6 +20,10 @@ atomic_t fscache_op_debug_id; EXPORT_SYMBOL(fscache_op_debug_id); +static void fscache_operation_dummy_cancel(struct fscache_operation *op) +{ +} + /** * fscache_operation_init - Do basic initialisation of an operation * @op: The operation to initialise @@ -30,6 +34,7 @@ EXPORT_SYMBOL(fscache_op_debug_id); */ void fscache_operation_init(struct fscache_operation *op, fscache_operation_processor_t processor, + fscache_operation_cancel_t cancel, fscache_operation_release_t release) { INIT_WORK(&op->work, fscache_op_work_func); @@ -37,6 +42,7 @@ void fscache_operation_init(struct fscache_operation *op, op->state = FSCACHE_OP_ST_INITIALISED; op->debug_id = atomic_inc_return(&fscache_op_debug_id); op->processor = processor; + op->cancel = cancel ?: fscache_operation_dummy_cancel; op->release = release; INIT_LIST_HEAD(&op->pend_link); fscache_stat(&fscache_n_op_initialised); @@ -164,9 +170,11 @@ int fscache_submit_exclusive_op(struct fscache_object *object, flags = READ_ONCE(object->flags); if (unlikely(!(flags & BIT(FSCACHE_OBJECT_IS_LIVE)))) { fscache_stat(&fscache_n_op_rejected); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } else if (unlikely(fscache_cache_is_broken(object))) { + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -EIO; } else if (flags & BIT(FSCACHE_OBJECT_IS_AVAILABLE)) { @@ -200,10 +208,12 @@ int fscache_submit_exclusive_op(struct fscache_object *object, fscache_stat(&fscache_n_op_pend); ret = 0; } else if (flags & BIT(FSCACHE_OBJECT_KILLED_BY_CACHE)) { + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } else { fscache_report_unexpected_submission(object, op, ostate); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } @@ -245,9 +255,11 @@ int fscache_submit_op(struct fscache_object *object, flags = READ_ONCE(object->flags); if (unlikely(!(flags & BIT(FSCACHE_OBJECT_IS_LIVE)))) { fscache_stat(&fscache_n_op_rejected); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } else if (unlikely(fscache_cache_is_broken(object))) { + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -EIO; } else if (flags & BIT(FSCACHE_OBJECT_IS_AVAILABLE)) { @@ -276,11 +288,13 @@ int fscache_submit_op(struct fscache_object *object, fscache_stat(&fscache_n_op_pend); ret = 0; } else if (flags & BIT(FSCACHE_OBJECT_KILLED_BY_CACHE)) { + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } else { fscache_report_unexpected_submission(object, op, ostate); ASSERT(!fscache_object_is_active(object)); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; ret = -ENOBUFS; } @@ -335,7 +349,6 @@ void fscache_start_operations(struct fscache_object *object) * cancel an operation that's pending on an object */ int fscache_cancel_op(struct fscache_operation *op, - void (*do_cancel)(struct fscache_operation *), bool cancel_in_progress_op) { struct fscache_object *object = op->object; @@ -355,9 +368,9 @@ int fscache_cancel_op(struct fscache_operation *op, ASSERT(!list_empty(&op->pend_link)); list_del_init(&op->pend_link); put = true; + fscache_stat(&fscache_n_op_cancelled); - if (do_cancel) - do_cancel(op); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) object->n_exclusive--; @@ -373,8 +386,7 @@ int fscache_cancel_op(struct fscache_operation *op, fscache_start_operations(object); fscache_stat(&fscache_n_op_cancelled); - if (do_cancel) - do_cancel(op); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) object->n_exclusive--; @@ -408,6 +420,7 @@ void fscache_cancel_all_ops(struct fscache_object *object) list_del_init(&op->pend_link); ASSERTCMP(op->state, ==, FSCACHE_OP_ST_PENDING); + op->cancel(op); op->state = FSCACHE_OP_ST_CANCELLED; if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) @@ -440,8 +453,12 @@ void fscache_op_complete(struct fscache_operation *op, bool cancelled) spin_lock(&object->lock); - op->state = cancelled ? - FSCACHE_OP_ST_CANCELLED : FSCACHE_OP_ST_COMPLETE; + if (!cancelled) { + op->state = FSCACHE_OP_ST_COMPLETE; + } else { + op->cancel(op); + op->state = FSCACHE_OP_ST_CANCELLED; + } if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) object->n_exclusive--; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 7db9752252ef..d1b23a67c031 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -213,7 +213,7 @@ int __fscache_attr_changed(struct fscache_cookie *cookie) return -ENOMEM; } - fscache_operation_init(op, fscache_attr_changed_op, NULL); + fscache_operation_init(op, fscache_attr_changed_op, NULL, NULL); op->flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_EXCLUSIVE) | (1 << FSCACHE_OP_UNUSE_COOKIE); @@ -248,6 +248,17 @@ nobufs: } EXPORT_SYMBOL(__fscache_attr_changed); +/* + * Handle cancellation of a pending retrieval op + */ +static void fscache_do_cancel_retrieval(struct fscache_operation *_op) +{ + struct fscache_retrieval *op = + container_of(_op, struct fscache_retrieval, op); + + atomic_set(&op->n_pages, 0); +} + /* * release a retrieval op reference */ @@ -285,7 +296,9 @@ static struct fscache_retrieval *fscache_alloc_retrieval( return NULL; } - fscache_operation_init(&op->op, NULL, fscache_release_retrieval_op); + fscache_operation_init(&op->op, NULL, + fscache_do_cancel_retrieval, + fscache_release_retrieval_op); op->op.flags = FSCACHE_OP_MYTHREAD | (1UL << FSCACHE_OP_WAITING) | (1UL << FSCACHE_OP_UNUSE_COOKIE); @@ -329,25 +342,13 @@ int fscache_wait_for_deferred_lookup(struct fscache_cookie *cookie) return 0; } -/* - * Handle cancellation of a pending retrieval op - */ -static void fscache_do_cancel_retrieval(struct fscache_operation *_op) -{ - struct fscache_retrieval *op = - container_of(_op, struct fscache_retrieval, op); - - atomic_set(&op->n_pages, 0); -} - /* * wait for an object to become active (or dead) */ int fscache_wait_for_operation_activation(struct fscache_object *object, struct fscache_operation *op, atomic_t *stat_op_waits, - atomic_t *stat_object_dead, - void (*do_cancel)(struct fscache_operation *)) + atomic_t *stat_object_dead) { int ret; @@ -359,7 +360,7 @@ int fscache_wait_for_operation_activation(struct fscache_object *object, fscache_stat(stat_op_waits); if (wait_on_bit(&op->flags, FSCACHE_OP_WAITING, TASK_INTERRUPTIBLE) != 0) { - ret = fscache_cancel_op(op, do_cancel, false); + ret = fscache_cancel_op(op, false); if (ret == 0) return -ERESTARTSYS; @@ -380,7 +381,7 @@ check_if_dead: if (unlikely(fscache_object_is_dying(object) || fscache_cache_is_broken(object))) { enum fscache_operation_state state = op->state; - fscache_cancel_op(op, do_cancel, true); + fscache_cancel_op(op, true); if (stat_object_dead) fscache_stat(stat_object_dead); _leave(" = -ENOBUFS [obj dead %d]", state); @@ -464,8 +465,7 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, ret = fscache_wait_for_operation_activation( object, &op->op, __fscache_stat(&fscache_n_retrieval_op_waits), - __fscache_stat(&fscache_n_retrievals_object_dead), - fscache_do_cancel_retrieval); + __fscache_stat(&fscache_n_retrievals_object_dead)); if (ret < 0) goto error; @@ -595,8 +595,7 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, ret = fscache_wait_for_operation_activation( object, &op->op, __fscache_stat(&fscache_n_retrieval_op_waits), - __fscache_stat(&fscache_n_retrievals_object_dead), - fscache_do_cancel_retrieval); + __fscache_stat(&fscache_n_retrievals_object_dead)); if (ret < 0) goto error; @@ -702,8 +701,7 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, ret = fscache_wait_for_operation_activation( object, &op->op, __fscache_stat(&fscache_n_alloc_op_waits), - __fscache_stat(&fscache_n_allocs_object_dead), - fscache_do_cancel_retrieval); + __fscache_stat(&fscache_n_allocs_object_dead)); if (ret < 0) goto error; @@ -946,7 +944,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, if (!op) goto nomem; - fscache_operation_init(&op->op, fscache_write_op, + fscache_operation_init(&op->op, fscache_write_op, NULL, fscache_release_write_op); op->op.flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_WAITING) | diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 0e26d49972e3..69c6eb10d858 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -74,6 +74,7 @@ extern wait_queue_head_t fscache_cache_cleared_wq; */ typedef void (*fscache_operation_release_t)(struct fscache_operation *op); typedef void (*fscache_operation_processor_t)(struct fscache_operation *op); +typedef void (*fscache_operation_cancel_t)(struct fscache_operation *op); enum fscache_operation_state { FSCACHE_OP_ST_BLANK, /* Op is not yet submitted */ @@ -109,6 +110,9 @@ struct fscache_operation { * the op in a non-pool thread */ fscache_operation_processor_t processor; + /* Operation cancellation cleanup (optional) */ + fscache_operation_cancel_t cancel; + /* operation releaser */ fscache_operation_release_t release; }; @@ -121,6 +125,7 @@ extern void fscache_op_complete(struct fscache_operation *, bool); extern void fscache_put_operation(struct fscache_operation *); extern void fscache_operation_init(struct fscache_operation *, fscache_operation_processor_t, + fscache_operation_cancel_t, fscache_operation_release_t); /* -- cgit v1.2.3 From 4a47132ff472a0c2c5441baeb50cf97f2580bc43 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 24 Feb 2015 10:05:29 +0000 Subject: FS-Cache: Retain the netfs context in the retrieval op earlier Now that the retrieval operation may be disposed of by fscache_put_operation() before we actually set the context, the retrieval-specific cleanup operation can produce a NULL-pointer dereference when it tries to unconditionally clean up the netfs context. Given that it is expected that we'll get at least as far as the place where we currently set the context pointer and it is unlikely we'll go through the error handling paths prior to that point, retain the context right from the point that the retrieval op is allocated. Concomitant to this, we need to retain the cookie pointer in the retrieval op also so that we can call the netfs to release its context in the release method. In addition, we might now get into fscache_release_retrieval_op() with the op only initialised. To this end, set the operation to DEAD only after the release method has been called and skip the n_pages test upon cleanup if the op is still in the INITIALISED state. Without these changes, the following oops might be seen: BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 ... RIP: 0010:[] fscache_release_retrieval_op+0xae/0x100 ... Call Trace: [] fscache_put_operation+0x117/0x2e0 [] __fscache_read_or_alloc_pages+0x351/0x3ac [] __nfs_readpages_from_fscache+0x59/0xbf [nfs] [] nfs_readpages+0x10c/0x185 [nfs] [] ? alloc_pages_current+0x119/0x13e [] ? __page_cache_alloc+0xfb/0x10a [] __do_page_cache_readahead+0x188/0x22c [] ondemand_readahead+0x29e/0x2af [] page_cache_sync_readahead+0x38/0x3a [] generic_file_read_iter+0x1a2/0x55a [] ? nfs_revalidate_mapping+0xd6/0x288 [nfs] [] nfs_file_read+0x49/0x70 [nfs] [] new_sync_read+0x78/0x9c [] __vfs_read+0x13/0x38 [] vfs_read+0x95/0x121 [] SyS_read+0x4c/0x8a [] system_call_fastpath+0x12/0x17 Signed-off-by: David Howells Reviewed-by: Steve Dickson Acked-by: Jeff Layton --- fs/fscache/operation.c | 2 +- fs/fscache/page.c | 20 ++++++++++---------- include/linux/fscache-cache.h | 1 + 3 files changed, 12 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 57d4abb68656..de67745e1cd7 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -492,7 +492,6 @@ void fscache_put_operation(struct fscache_operation *op) ASSERTIFCMP(op->state != FSCACHE_OP_ST_INITIALISED && op->state != FSCACHE_OP_ST_COMPLETE, op->state, ==, FSCACHE_OP_ST_CANCELLED); - op->state = FSCACHE_OP_ST_DEAD; fscache_stat(&fscache_n_op_release); @@ -500,6 +499,7 @@ void fscache_put_operation(struct fscache_operation *op) op->release(op); op->release = NULL; } + op->state = FSCACHE_OP_ST_DEAD; object = op->object; if (likely(object)) { diff --git a/fs/fscache/page.c b/fs/fscache/page.c index d1b23a67c031..483bbc613bf0 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -269,11 +269,12 @@ static void fscache_release_retrieval_op(struct fscache_operation *_op) _enter("{OP%x}", op->op.debug_id); - ASSERTCMP(atomic_read(&op->n_pages), ==, 0); + ASSERTIFCMP(op->op.state != FSCACHE_OP_ST_INITIALISED, + atomic_read(&op->n_pages), ==, 0); fscache_hist(fscache_retrieval_histogram, op->start_time); if (op->context) - fscache_put_context(op->op.object->cookie, op->context); + fscache_put_context(op->cookie, op->context); _leave(""); } @@ -302,11 +303,18 @@ static struct fscache_retrieval *fscache_alloc_retrieval( op->op.flags = FSCACHE_OP_MYTHREAD | (1UL << FSCACHE_OP_WAITING) | (1UL << FSCACHE_OP_UNUSE_COOKIE); + op->cookie = cookie; op->mapping = mapping; op->end_io_func = end_io_func; op->context = context; op->start_time = jiffies; INIT_LIST_HEAD(&op->to_do); + + /* Pin the netfs read context in case we need to do the actual netfs + * read because we've encountered a cache read failure. + */ + if (context) + fscache_get_context(op->cookie, context); return op; } @@ -456,10 +464,6 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, fscache_stat(&fscache_n_retrieval_ops); - /* pin the netfs read context in case we need to do the actual netfs - * read because we've encountered a cache read failure */ - fscache_get_context(object->cookie, op->context); - /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ ret = fscache_wait_for_operation_activation( @@ -586,10 +590,6 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, fscache_stat(&fscache_n_retrieval_ops); - /* pin the netfs read context in case we need to do the actual netfs - * read because we've encountered a cache read failure */ - fscache_get_context(object->cookie, op->context); - /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ ret = fscache_wait_for_operation_activation( diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 69c6eb10d858..604e1526cd00 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -133,6 +133,7 @@ extern void fscache_operation_init(struct fscache_operation *, */ struct fscache_retrieval { struct fscache_operation op; + struct fscache_cookie *cookie; /* The netfs cookie */ struct address_space *mapping; /* netfs pages */ fscache_rw_complete_t end_io_func; /* function to call on I/O completion */ void *context; /* netfs read context (pinned) */ -- cgit v1.2.3 From 1347f5b46a270db1991625f9f57af91e23a4b512 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Tue, 17 Mar 2015 11:39:27 +0200 Subject: drm/i915/bxt: Add BXT PCI ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2: Switch to info->ring_mask and add VEBOX support. v3: Fold in update from Damien. v4: Add GEN_DEFAULT_PIPEOFFSETS and IVB_CURSOR_OFFSETS v5: set no-LLC (imre) Signed-off-by: Damien Lespiau (v1,v4) Signed-off-by: Daniel Vetter (v4) Signed-off-by: Imre Deak Reviewed-by: Antti Koskipää Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 14 +++++++++++++- include/drm/i915_pciids.h | 6 ++++++ 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 82f8be4b6745..4d5078550e0b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -381,6 +381,17 @@ static const struct intel_device_info intel_skylake_gt3_info = { IVB_CURSOR_OFFSETS, }; +static const struct intel_device_info intel_broxton_info = { + .is_preliminary = 1, + .gen = 9, + .need_gfx_hws = 1, .has_hotplug = 1, + .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING, + .num_pipes = 3, + .has_ddi = 1, + GEN_DEFAULT_PIPEOFFSETS, + IVB_CURSOR_OFFSETS, +}; + /* * Make sure any device matches here are from most specific to most * general. For example, since the Quanta match is based on the subsystem @@ -420,7 +431,8 @@ static const struct intel_device_info intel_skylake_gt3_info = { INTEL_CHV_IDS(&intel_cherryview_info), \ INTEL_SKL_GT1_IDS(&intel_skylake_info), \ INTEL_SKL_GT2_IDS(&intel_skylake_info), \ - INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info) \ + INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info), \ + INTEL_BXT_IDS(&intel_broxton_info) static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_PCI_IDS, diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 613372375ada..bd0d644d2a03 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -287,4 +287,10 @@ INTEL_SKL_GT3_IDS(info) +#define INTEL_BXT_IDS(info) \ + INTEL_VGA_DEVICE(0x0A84, info), \ + INTEL_VGA_DEVICE(0x0A85, info), \ + INTEL_VGA_DEVICE(0x0A86, info), \ + INTEL_VGA_DEVICE(0x0A87, info) + #endif /* _I915_PCIIDS_H */ -- cgit v1.2.3 From c8a8585431efba0faaf41167f8f7c27c48307ca6 Mon Sep 17 00:00:00 2001 From: Vianney le Clément de Saint-Marcq Date: Mon, 30 Mar 2015 10:34:58 +0200 Subject: iio: core: Introduce IIO_CHAN_INFO_CALIBEMISSIVITY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Contact-less IR temperature sensors measure the temperature of an object by using its thermal radiation. Surfaces with different emissivity ratios emit different amounts of energy at the same temperature. IIO_CHAN_INFO_CALIBEMISSIVITY allows the user to inform the sensor of the emissivity of the object in front of it, in order to effectively measure its temperature. A device providing such setting is Melexis's MLX90614: http://melexis.com/Assets/IR-sensor-thermometer-MLX90614-Datasheet-5152.aspx. Signed-off-by: Vianney le Clément de Saint-Marcq Cc: Arnout Vandecappelle (Essensium/Mind) Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio | 11 +++++++++++ drivers/iio/industrialio-core.c | 1 + include/linux/iio/iio.h | 1 + 3 files changed, 13 insertions(+) (limited to 'include') diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 3befcb19f414..866b4ec4aab6 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1364,3 +1364,14 @@ Description: hwfifo_watermak_min but not equal to any of the values in this list, the driver will chose an appropriate value for the hardware fifo watermark level. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity +KernelVersion: 4.1 +Contact: linux-iio@vger.kernel.org +Description: + The emissivity ratio of the surface in the field of view of the + contactless temperature sensor. Emissivity varies from 0 to 1, + with 1 being the emissivity of a black body. diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 4df97f650e44..7c98bc1504e6 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -128,6 +128,7 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_CALIBWEIGHT] = "calibweight", [IIO_CHAN_INFO_DEBOUNCE_COUNT] = "debounce_count", [IIO_CHAN_INFO_DEBOUNCE_TIME] = "debounce_time", + [IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity", }; /** diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index d86b753e9b30..b1e46ae89aa7 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -43,6 +43,7 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_CALIBWEIGHT, IIO_CHAN_INFO_DEBOUNCE_COUNT, IIO_CHAN_INFO_DEBOUNCE_TIME, + IIO_CHAN_INFO_CALIBEMISSIVITY, }; enum iio_shared_by { -- cgit v1.2.3 From ea9da4e4608104108c6d5eca7b178cec2720ab22 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 2 Apr 2015 10:35:08 +0100 Subject: drm/i915: Allow disabling the destination colorkey for overlay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sometimes userspace wants a true overlay that is never clipped. In such cases, we need to disable the destination colorkey. However, it is currently unconditionally enabled in the overlay with no means of disabling. So rectify that by always default to on, and extending the UPDATE_ATTR ioctl to support explicit disabling of the colorkey. This is contrast to the spite code which requires explicit enabling of either the destination or source colorkey. Handling source colorkey is still todo for the overlay. (Of course it may be worth migrating overlay to sprite before then.) Signed-off-by: Chris Wilson Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_overlay.c | 30 +++++++++++++++++++----------- include/uapi/drm/i915_drm.h | 1 + 2 files changed, 20 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index b291f1301c93..5fd2d5ac02e2 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -175,7 +175,8 @@ struct intel_overlay { bool active; bool pfit_active; u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */ - u32 color_key; + u32 color_key:24; + u32 color_key_enabled:1; u32 brightness, contrast, saturation; u32 old_xscale, old_yscale; /* register access */ @@ -630,31 +631,36 @@ static void update_colorkey(struct intel_overlay *overlay, struct overlay_registers __iomem *regs) { u32 key = overlay->color_key; + u32 flags; + + flags = 0; + if (overlay->color_key_enabled) + flags |= DST_KEY_ENABLE; switch (overlay->crtc->base.primary->fb->bits_per_pixel) { case 8: - iowrite32(0, ®s->DCLRKV); - iowrite32(CLK_RGB8I_MASK | DST_KEY_ENABLE, ®s->DCLRKM); + key = 0; + flags |= CLK_RGB8I_MASK; break; case 16: if (overlay->crtc->base.primary->fb->depth == 15) { - iowrite32(RGB15_TO_COLORKEY(key), ®s->DCLRKV); - iowrite32(CLK_RGB15_MASK | DST_KEY_ENABLE, - ®s->DCLRKM); + key = RGB15_TO_COLORKEY(key); + flags |= CLK_RGB15_MASK; } else { - iowrite32(RGB16_TO_COLORKEY(key), ®s->DCLRKV); - iowrite32(CLK_RGB16_MASK | DST_KEY_ENABLE, - ®s->DCLRKM); + key = RGB16_TO_COLORKEY(key); + flags |= CLK_RGB16_MASK; } break; case 24: case 32: - iowrite32(key, ®s->DCLRKV); - iowrite32(CLK_RGB24_MASK | DST_KEY_ENABLE, ®s->DCLRKM); + flags |= CLK_RGB24_MASK; break; } + + iowrite32(key, ®s->DCLRKV); + iowrite32(flags, ®s->DCLRKM); } static u32 overlay_cmd_reg(struct put_image_params *params) @@ -1329,6 +1335,7 @@ int intel_overlay_attrs(struct drm_device *dev, void *data, I915_WRITE(OGAMC5, attrs->gamma5); } } + overlay->color_key_enabled = (attrs->flags & I915_OVERLAY_DISABLE_DEST_COLORKEY) == 0; ret = 0; out_unlock: @@ -1392,6 +1399,7 @@ void intel_setup_overlay(struct drm_device *dev) /* init all values */ overlay->color_key = 0x0101fe; + overlay->color_key_enabled = true; overlay->brightness = -19; overlay->contrast = 75; overlay->saturation = 146; diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 551b6737f5df..4851d660243c 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -996,6 +996,7 @@ struct drm_intel_overlay_put_image { /* flags */ #define I915_OVERLAY_UPDATE_ATTRS (1<<0) #define I915_OVERLAY_UPDATE_GAMMA (1<<1) +#define I915_OVERLAY_DISABLE_DEST_COLORKEY (1<<2) struct drm_intel_overlay_attrs { __u32 flags; __u32 color_key; -- cgit v1.2.3 From f81338a52a82009863b0dc9d597fe1000d1caff6 Mon Sep 17 00:00:00 2001 From: Chandra Konduru Date: Thu, 9 Apr 2015 17:36:21 -0700 Subject: drm: Adding drm helper function drm_plane_from_index(). Adding drm helper function to return plane pointer from index where index is a returned by drm_plane_index. v2: -avoided nested loop by adding loop count (Daniel) v3: -updated patch header prefix to 'drm' (Matt) v4: -fixed a kerneldoc issue (kbuild-internal) Cc: dri-devel@lists.freedesktop.org Signed-off-by: Chandra Konduru Reviewed-by: Matt Roper Acked-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_crtc.c | 23 +++++++++++++++++++++++ include/drm/drm_crtc.h | 1 + 2 files changed, 24 insertions(+) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 9f970c2d4819..6254942141d3 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1285,6 +1285,29 @@ unsigned int drm_plane_index(struct drm_plane *plane) } EXPORT_SYMBOL(drm_plane_index); +/** + * drm_plane_from_index - find the registered plane at an index + * @dev: DRM device + * @idx: index of registered plane to find for + * + * Given a plane index, return the registered plane from DRM device's + * list of planes with matching index. + */ +struct drm_plane * +drm_plane_from_index(struct drm_device *dev, int idx) +{ + struct drm_plane *plane; + unsigned int i = 0; + + list_for_each_entry(plane, &dev->mode_config.plane_list, head) { + if (i == idx) + return plane; + i++; + } + return NULL; +} +EXPORT_SYMBOL(drm_plane_from_index); + /** * drm_plane_force_disable - Forcibly disable a plane * @plane: plane to disable diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index adc9ea5acf02..ed769e79c675 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1264,6 +1264,7 @@ extern int drm_plane_init(struct drm_device *dev, bool is_primary); extern void drm_plane_cleanup(struct drm_plane *plane); extern unsigned int drm_plane_index(struct drm_plane *plane); +extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx); extern void drm_plane_force_disable(struct drm_plane *plane); extern int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format); -- cgit v1.2.3 From 14752412721c61d9ac1e8d8fb51d7148cb15f85b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Apr 2015 12:15:47 +0200 Subject: ALSA: hda - Add the controller helper codes to hda-core module This patch adds the controller helper codes to hda-core library. The I/O access ops are added to the bus ops. The CORB/RIRB, the basic attributes like irq# and iomap address, some locks and the list of streams are added to the bus object, together with the stream object and its helpers. Currently the codes are just copied from the legacy driver, so you can find duplicated codes in both directories. Only constants are removed from the original hda_controller.h. More integration work will follow in the later patches. Signed-off-by: Takashi Iwai --- include/sound/hda_register.h | 152 ++++++++++++ include/sound/hdaudio.h | 224 ++++++++++++++++- sound/hda/Makefile | 2 +- sound/hda/hdac_bus.c | 20 +- sound/hda/hdac_controller.c | 449 ++++++++++++++++++++++++++++++++++ sound/hda/hdac_stream.c | 536 +++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_codec.c | 2 +- sound/pci/hda/hda_controller.h | 132 +--------- 8 files changed, 1380 insertions(+), 137 deletions(-) create mode 100644 include/sound/hda_register.h create mode 100644 sound/hda/hdac_controller.c create mode 100644 sound/hda/hdac_stream.c (limited to 'include') diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h new file mode 100644 index 000000000000..4f6d3fce6ee6 --- /dev/null +++ b/include/sound/hda_register.h @@ -0,0 +1,152 @@ +/* + * HD-audio controller (Azalia) registers and helpers + * + * For traditional reasons, we still use azx_ prefix here + */ + +#ifndef __SOUND_HDA_REGISTER_H +#define __SOUND_HDA_REGISTER_H + +#include +#include + +#define AZX_REG_GCAP 0x00 +#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ +#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ +#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ +#define AZX_REG_VMIN 0x02 +#define AZX_REG_VMAJ 0x03 +#define AZX_REG_OUTPAY 0x04 +#define AZX_REG_INPAY 0x06 +#define AZX_REG_GCTL 0x08 +#define AZX_GCTL_RESET (1 << 0) /* controller reset */ +#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ +#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define AZX_REG_WAKEEN 0x0c +#define AZX_REG_STATESTS 0x0e +#define AZX_REG_GSTS 0x10 +#define AZX_GSTS_FSTS (1 << 1) /* flush status */ +#define AZX_REG_INTCTL 0x20 +#define AZX_REG_INTSTS 0x24 +#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ +#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ +#define AZX_REG_SSYNC 0x38 +#define AZX_REG_CORBLBASE 0x40 +#define AZX_REG_CORBUBASE 0x44 +#define AZX_REG_CORBWP 0x48 +#define AZX_REG_CORBRP 0x4a +#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ +#define AZX_REG_CORBCTL 0x4c +#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define AZX_REG_CORBSTS 0x4d +#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define AZX_REG_CORBSIZE 0x4e + +#define AZX_REG_RIRBLBASE 0x50 +#define AZX_REG_RIRBUBASE 0x54 +#define AZX_REG_RIRBWP 0x58 +#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define AZX_REG_RINTCNT 0x5a +#define AZX_REG_RIRBCTL 0x5c +#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define AZX_REG_RIRBSTS 0x5d +#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ +#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define AZX_REG_RIRBSIZE 0x5e + +#define AZX_REG_IC 0x60 +#define AZX_REG_IR 0x64 +#define AZX_REG_IRS 0x68 +#define AZX_IRS_VALID (1<<1) +#define AZX_IRS_BUSY (1<<0) + +#define AZX_REG_DPLBASE 0x70 +#define AZX_REG_DPUBASE 0x74 +#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; + +/* stream register offsets from stream base */ +#define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_STS 0x03 +#define AZX_REG_SD_LPIB 0x04 +#define AZX_REG_SD_CBL 0x08 +#define AZX_REG_SD_LVI 0x0c +#define AZX_REG_SD_FIFOW 0x0e +#define AZX_REG_SD_FIFOSIZE 0x10 +#define AZX_REG_SD_FORMAT 0x12 +#define AZX_REG_SD_BDLPL 0x18 +#define AZX_REG_SD_BDLPU 0x1c + +/* PCI space */ +#define AZX_PCIREG_TCSEL 0x44 + +/* + * other constants + */ + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ +#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16) /* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ +#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04 /* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ + +/* INTCTL and INTSTS */ +#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define AZX_MAX_CORB_ENTRIES 256 +#define AZX_MAX_RIRB_ENTRIES 256 + +/* + * helpers to read the stream position + */ +static inline unsigned int +snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) +{ + return snd_hdac_stream_readl(stream, SD_LPIB); +} + +static inline unsigned int +snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) +{ + return le32_to_cpu(*stream->posbuf); +} + +#endif /* __SOUND_HDA_REGISTER_H */ diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 2a8aa9dfb83d..9349ccf15a36 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -6,12 +6,17 @@ #define __SOUND_HDAUDIO_H #include +#include +#include +#include +#include #include /* codec node id */ typedef u16 hda_nid_t; struct hdac_bus; +struct hdac_stream; struct hdac_device; struct hdac_driver; struct hdac_widget_tree; @@ -161,7 +166,7 @@ struct hdac_driver { #define drv_to_hdac_driver(_drv) container_of(_drv, struct hdac_driver, driver) /* - * HD-audio bus base driver + * Bus verb operators */ struct hdac_bus_ops { /* send a single command */ @@ -171,11 +176,50 @@ struct hdac_bus_ops { unsigned int *res); }; +/* + * Lowlevel I/O operators + */ +struct hdac_io_ops { + /* mapped register accesses */ + void (*reg_writel)(u32 value, u32 __iomem *addr); + u32 (*reg_readl)(u32 __iomem *addr); + void (*reg_writew)(u16 value, u16 __iomem *addr); + u16 (*reg_readw)(u16 __iomem *addr); + void (*reg_writeb)(u8 value, u8 __iomem *addr); + u8 (*reg_readb)(u8 __iomem *addr); +}; + #define HDA_UNSOL_QUEUE_SIZE 64 +#define HDA_MAX_CODECS 8 /* limit by controller side */ + +/* HD Audio class code */ +#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 + +/* + * CORB/RIRB + * + * Each CORB entry is 4byte, RIRB is 8byte + */ +struct hdac_rb { + __le32 *buf; /* virtual address of CORB/RIRB buffer */ + dma_addr_t addr; /* physical address of CORB/RIRB buffer */ + unsigned short rp, wp; /* RIRB read/write pointers */ + int cmds[HDA_MAX_CODECS]; /* number of pending requests */ + u32 res[HDA_MAX_CODECS]; /* last read value */ +}; +/* + * HD-audio bus base driver + */ struct hdac_bus { struct device *dev; const struct hdac_bus_ops *ops; + const struct hdac_io_ops *io_ops; + + /* h/w resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; /* codec linked list */ struct list_head codec_list; @@ -189,18 +233,45 @@ struct hdac_bus { unsigned int unsol_rp, unsol_wp; struct work_struct unsol_work; + /* bit flags of detected codecs */ + unsigned long codec_mask; + /* bit flags of powered codecs */ unsigned long codec_powered; - /* flags */ + /* CORB/RIRB */ + struct hdac_rb corb; + struct hdac_rb rirb; + unsigned int last_cmd[HDA_MAX_CODECS]; /* last sent command */ + + /* CORB/RIRB and position buffers */ + struct snd_dma_buffer rb; + struct snd_dma_buffer posbuf; + + /* hdac_stream linked list */ + struct list_head stream_list; + + /* operation state */ + bool chip_init:1; /* h/w initialized */ + + /* behavior flags */ bool sync_write:1; /* sync after verb write */ + bool use_posbuf:1; /* use position buffer */ + bool snoop:1; /* enable snooping */ + bool align_bdle_4k:1; /* BDLE align 4K boundary */ + bool reverse_assign:1; /* assign devices in reverse order */ + bool corbrp_self_clear:1; /* CORBRP clears itself after reset */ + + int bdl_pos_adj; /* BDL position adjustment */ /* locks */ + spinlock_t reg_lock; struct mutex cmd_mutex; }; int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev, - const struct hdac_bus_ops *ops); + const struct hdac_bus_ops *ops, + const struct hdac_io_ops *io_ops); void snd_hdac_bus_exit(struct hdac_bus *bus); int snd_hdac_bus_exec_verb(struct hdac_bus *bus, unsigned int addr, unsigned int cmd, unsigned int *res); @@ -222,6 +293,153 @@ static inline void snd_hdac_codec_link_down(struct hdac_device *codec) clear_bit(codec->addr, &codec->bus->codec_powered); } +int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val); +int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr, + unsigned int *res); + +bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset); +void snd_hdac_bus_stop_chip(struct hdac_bus *bus); +void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus); +void snd_hdac_bus_stop_cmd_io(struct hdac_bus *bus); +void snd_hdac_bus_enter_link_reset(struct hdac_bus *bus); +void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus); + +void snd_hdac_bus_update_rirb(struct hdac_bus *bus); +void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status, + void (*ack)(struct hdac_bus *, + struct hdac_stream *)); + +/* + * macros for easy use + */ +#define _snd_hdac_chip_write(type, chip, reg, value) \ + ((chip)->io_ops->reg_write ## type(value, (chip)->remap_addr + (reg))) +#define _snd_hdac_chip_read(type, chip, reg) \ + ((chip)->io_ops->reg_read ## type((chip)->remap_addr + (reg))) + +/* read/write a register, pass without AZX_REG_ prefix */ +#define snd_hdac_chip_writel(chip, reg, value) \ + _snd_hdac_chip_write(l, chip, AZX_REG_ ## reg, value) +#define snd_hdac_chip_writew(chip, reg, value) \ + _snd_hdac_chip_write(w, chip, AZX_REG_ ## reg, value) +#define snd_hdac_chip_writeb(chip, reg, value) \ + _snd_hdac_chip_write(b, chip, AZX_REG_ ## reg, value) +#define snd_hdac_chip_readl(chip, reg) \ + _snd_hdac_chip_read(l, chip, AZX_REG_ ## reg) +#define snd_hdac_chip_readw(chip, reg) \ + _snd_hdac_chip_read(w, chip, AZX_REG_ ## reg) +#define snd_hdac_chip_readb(chip, reg) \ + _snd_hdac_chip_read(b, chip, AZX_REG_ ## reg) + +/* update a register, pass without AZX_REG_ prefix */ +#define snd_hdac_chip_updatel(chip, reg, mask, val) \ + snd_hdac_chip_writel(chip, reg, \ + (snd_hdac_chip_readl(chip, reg) & ~(mask)) | (val)) +#define snd_hdac_chip_updatew(chip, reg, mask, val) \ + snd_hdac_chip_writew(chip, reg, \ + (snd_hdac_chip_readw(chip, reg) & ~(mask)) | (val)) +#define snd_hdac_chip_updateb(chip, reg, mask, val) \ + snd_hdac_chip_writeb(chip, reg, \ + (snd_hdac_chip_readb(chip, reg) & ~(mask)) | (val)) + +/* + * HD-audio stream + */ +struct hdac_stream { + struct hdac_bus *bus; + struct snd_dma_buffer bdl; /* BDL buffer */ + __le32 *posbuf; /* position buffer pointer */ + int direction; /* playback / capture (SNDRV_PCM_STREAM_*) */ + + unsigned int bufsize; /* size of the play buffer in bytes */ + unsigned int period_bytes; /* size of the period in bytes */ + unsigned int frags; /* number for period in the play buffer */ + unsigned int fifo_size; /* FIFO size */ + + void __iomem *sd_addr; /* stream descriptor pointer */ + + u32 sd_int_sta_mask; /* stream int status mask */ + + /* pcm support */ + struct snd_pcm_substream *substream; /* assigned substream, + * set in PCM open + */ + unsigned int format_val; /* format value to be set in the + * controller and the codec + */ + unsigned char stream_tag; /* assigned stream */ + unsigned char index; /* stream index */ + int assigned_key; /* last device# key assigned to */ + + bool opened:1; + bool running:1; + bool no_period_wakeup:1; + + /* timestamp */ + unsigned long start_wallclk; /* start + minimum wallclk */ + unsigned long period_wallclk; /* wallclk for period */ + struct timecounter tc; + struct cyclecounter cc; + int delay_negative_threshold; + + struct list_head list; +}; + +void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, + int idx, int direction, int tag); +struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, + struct snd_pcm_substream *substream); +void snd_hdac_stream_release(struct hdac_stream *azx_dev); + +int snd_hdac_stream_setup(struct hdac_stream *azx_dev); +void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev); +int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev); +void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start); +void snd_hdac_stream_clear(struct hdac_stream *azx_dev); +void snd_hdac_stream_stop(struct hdac_stream *azx_dev); +void snd_hdac_stream_reset(struct hdac_stream *azx_dev); +void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, + unsigned int streams, unsigned int reg); +void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, + unsigned int streams); +void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, + unsigned int streams); +/* + * macros for easy use + */ +#define _snd_hdac_stream_write(type, dev, reg, value) \ + ((dev)->bus->io_ops->reg_write ## type(value, (dev)->sd_addr + (reg))) +#define _snd_hdac_stream_read(type, dev, reg) \ + ((dev)->bus->io_ops->reg_read ## type((dev)->sd_addr + (reg))) + +/* read/write a register, pass without AZX_REG_ prefix */ +#define snd_hdac_stream_writel(dev, reg, value) \ + _snd_hdac_stream_write(l, dev, AZX_REG_ ## reg, value) +#define snd_hdac_stream_writew(dev, reg, value) \ + _snd_hdac_stream_write(w, dev, AZX_REG_ ## reg, value) +#define snd_hdac_stream_writeb(dev, reg, value) \ + _snd_hdac_stream_write(b, dev, AZX_REG_ ## reg, value) +#define snd_hdac_stream_readl(dev, reg) \ + _snd_hdac_stream_read(l, dev, AZX_REG_ ## reg) +#define snd_hdac_stream_readw(dev, reg) \ + _snd_hdac_stream_read(w, dev, AZX_REG_ ## reg) +#define snd_hdac_stream_readb(dev, reg) \ + _snd_hdac_stream_read(b, dev, AZX_REG_ ## reg) + +/* update a register, pass without AZX_REG_ prefix */ +#define snd_hdac_stream_updatel(dev, reg, mask, val) \ + snd_hdac_stream_writel(dev, reg, \ + (snd_hdac_stream_readl(dev, reg) & \ + ~(mask)) | (val)) +#define snd_hdac_stream_updatew(dev, reg, mask, val) \ + snd_hdac_stream_writew(dev, reg, \ + (snd_hdac_stream_readw(dev, reg) & \ + ~(mask)) | (val)) +#define snd_hdac_stream_updateb(dev, reg, mask, val) \ + snd_hdac_stream_writeb(dev, reg, \ + (snd_hdac_stream_readb(dev, reg) & \ + ~(mask)) | (val)) + /* * generic array helpers */ diff --git a/sound/hda/Makefile b/sound/hda/Makefile index 7a359f5b7e25..5b4bb47c16fd 100644 --- a/sound/hda/Makefile +++ b/sound/hda/Makefile @@ -1,5 +1,5 @@ snd-hda-core-objs := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o \ - hdac_regmap.o array.o + hdac_regmap.o hdac_controller.o hdac_stream.o array.o snd-hda-core-objs += trace.o CFLAGS_trace.o := -I$(src) diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c index 8e262da74f6a..27c447e4fe5c 100644 --- a/sound/hda/hdac_bus.c +++ b/sound/hda/hdac_bus.c @@ -11,21 +11,36 @@ static void process_unsol_events(struct work_struct *work); +static const struct hdac_bus_ops default_ops = { + .command = snd_hdac_bus_send_cmd, + .get_response = snd_hdac_bus_get_response, +}; + /** * snd_hdac_bus_init - initialize a HD-audio bas bus * @bus: the pointer to bus object + * @ops: bus verb operators + * @io_ops: lowlevel I/O operators * * Returns 0 if successful, or a negative error code. */ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev, - const struct hdac_bus_ops *ops) + const struct hdac_bus_ops *ops, + const struct hdac_io_ops *io_ops) { memset(bus, 0, sizeof(*bus)); bus->dev = dev; - bus->ops = ops; + if (ops) + bus->ops = ops; + else + bus->ops = &default_ops; + bus->io_ops = io_ops; + INIT_LIST_HEAD(&bus->stream_list); INIT_LIST_HEAD(&bus->codec_list); INIT_WORK(&bus->unsol_work, process_unsol_events); + spin_lock_init(&bus->reg_lock); mutex_init(&bus->cmd_mutex); + bus->irq = -1; return 0; } EXPORT_SYMBOL_GPL(snd_hdac_bus_init); @@ -36,6 +51,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_bus_init); */ void snd_hdac_bus_exit(struct hdac_bus *bus) { + WARN_ON(!list_empty(&bus->stream_list)); WARN_ON(!list_empty(&bus->codec_list)); cancel_work_sync(&bus->unsol_work); } diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c new file mode 100644 index 000000000000..c0069d0b7875 --- /dev/null +++ b/sound/hda/hdac_controller.c @@ -0,0 +1,449 @@ +/* + * HD-audio controller helpers + */ + +#include +#include +#include +#include +#include +#include + +/* clear CORB read pointer properly */ +static void azx_clear_corbrp(struct hdac_bus *bus) +{ + int timeout; + + for (timeout = 1000; timeout > 0; timeout--) { + if (snd_hdac_chip_readw(bus, CORBRP) & AZX_CORBRP_RST) + break; + udelay(1); + } + if (timeout <= 0) + dev_err(bus->dev, "CORB reset timeout#1, CORBRP = %d\n", + snd_hdac_chip_readw(bus, CORBRP)); + + snd_hdac_chip_writew(bus, CORBRP, 0); + for (timeout = 1000; timeout > 0; timeout--) { + if (snd_hdac_chip_readw(bus, CORBRP) == 0) + break; + udelay(1); + } + if (timeout <= 0) + dev_err(bus->dev, "CORB reset timeout#2, CORBRP = %d\n", + snd_hdac_chip_readw(bus, CORBRP)); +} + +/** + * snd_hdac_bus_init_cmd_io - set up CORB/RIRB buffers + * @bus: HD-audio core bus + */ +void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) +{ + spin_lock_irq(&bus->reg_lock); + /* CORB set up */ + bus->corb.addr = bus->rb.addr; + bus->corb.buf = (__le32 *)bus->rb.area; + snd_hdac_chip_writel(bus, CORBLBASE, (u32)bus->corb.addr); + snd_hdac_chip_writel(bus, CORBUBASE, upper_32_bits(bus->corb.addr)); + + /* set the corb size to 256 entries (ULI requires explicitly) */ + snd_hdac_chip_writeb(bus, CORBSIZE, 0x02); + /* set the corb write pointer to 0 */ + snd_hdac_chip_writew(bus, CORBWP, 0); + + /* reset the corb hw read pointer */ + snd_hdac_chip_writew(bus, CORBRP, AZX_CORBRP_RST); + if (!bus->corbrp_self_clear) + azx_clear_corbrp(bus); + + /* enable corb dma */ + snd_hdac_chip_writeb(bus, CORBCTL, AZX_CORBCTL_RUN); + + /* RIRB set up */ + bus->rirb.addr = bus->rb.addr + 2048; + bus->rirb.buf = (__le32 *)(bus->rb.area + 2048); + bus->rirb.wp = bus->rirb.rp = 0; + memset(bus->rirb.cmds, 0, sizeof(bus->rirb.cmds)); + snd_hdac_chip_writel(bus, RIRBLBASE, (u32)bus->rirb.addr); + snd_hdac_chip_writel(bus, RIRBUBASE, upper_32_bits(bus->rirb.addr)); + + /* set the rirb size to 256 entries (ULI requires explicitly) */ + snd_hdac_chip_writeb(bus, RIRBSIZE, 0x02); + /* reset the rirb hw write pointer */ + snd_hdac_chip_writew(bus, RIRBWP, AZX_RIRBWP_RST); + /* set N=1, get RIRB response interrupt for new entry */ + snd_hdac_chip_writew(bus, RINTCNT, 1); + /* enable rirb dma and response irq */ + snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN); + spin_unlock_irq(&bus->reg_lock); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_init_cmd_io); + +/** + * snd_hdac_bus_stop_cmd_io - clean up CORB/RIRB buffers + * @bus: HD-audio core bus + */ +void snd_hdac_bus_stop_cmd_io(struct hdac_bus *bus) +{ + spin_lock_irq(&bus->reg_lock); + /* disable ringbuffer DMAs */ + snd_hdac_chip_writeb(bus, RIRBCTL, 0); + snd_hdac_chip_writeb(bus, CORBCTL, 0); + /* disable unsolicited responses */ + snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, 0); + spin_unlock_irq(&bus->reg_lock); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_stop_cmd_io); + +static unsigned int azx_command_addr(u32 cmd) +{ + unsigned int addr = cmd >> 28; + + if (snd_BUG_ON(addr >= HDA_MAX_CODECS)) + addr = 0; + return addr; +} + +/** + * snd_hdac_bus_send_cmd - send a command verb via CORB + * @bus: HD-audio core bus + * @val: encoded verb value to send + * + * Returns zero for success or a negative error code. + */ +int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val) +{ + unsigned int addr = azx_command_addr(val); + unsigned int wp, rp; + + spin_lock_irq(&bus->reg_lock); + + bus->last_cmd[azx_command_addr(val)] = val; + + /* add command to corb */ + wp = snd_hdac_chip_readw(bus, CORBWP); + if (wp == 0xffff) { + /* something wrong, controller likely turned to D3 */ + spin_unlock_irq(&bus->reg_lock); + return -EIO; + } + wp++; + wp %= AZX_MAX_CORB_ENTRIES; + + rp = snd_hdac_chip_readw(bus, CORBRP); + if (wp == rp) { + /* oops, it's full */ + spin_unlock_irq(&bus->reg_lock); + return -EAGAIN; + } + + bus->rirb.cmds[addr]++; + bus->corb.buf[wp] = cpu_to_le32(val); + snd_hdac_chip_writew(bus, CORBWP, wp); + + spin_unlock_irq(&bus->reg_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_send_cmd); + +#define AZX_RIRB_EX_UNSOL_EV (1<<4) + +/** + * snd_hdac_bus_update_rirb - retrieve RIRB entries + * @bus: HD-audio core bus + * + * Usually called from interrupt handler. + */ +void snd_hdac_bus_update_rirb(struct hdac_bus *bus) +{ + unsigned int rp, wp; + unsigned int addr; + u32 res, res_ex; + + wp = snd_hdac_chip_readw(bus, RIRBWP); + if (wp == 0xffff) { + /* something wrong, controller likely turned to D3 */ + return; + } + + if (wp == bus->rirb.wp) + return; + bus->rirb.wp = wp; + + while (bus->rirb.rp != wp) { + bus->rirb.rp++; + bus->rirb.rp %= AZX_MAX_RIRB_ENTRIES; + + rp = bus->rirb.rp << 1; /* an RIRB entry is 8-bytes */ + res_ex = le32_to_cpu(bus->rirb.buf[rp + 1]); + res = le32_to_cpu(bus->rirb.buf[rp]); + addr = res_ex & 0xf; + if (addr >= HDA_MAX_CODECS) { + dev_err(bus->dev, + "spurious response %#x:%#x, rp = %d, wp = %d", + res, res_ex, bus->rirb.rp, wp); + snd_BUG(); + } else if (res_ex & AZX_RIRB_EX_UNSOL_EV) + snd_hdac_bus_queue_event(bus, res, res_ex); + else if (bus->rirb.cmds[addr]) { + bus->rirb.res[addr] = res; + bus->rirb.cmds[addr]--; + } else { + dev_err_ratelimited(bus->dev, + "spurious response %#x:%#x, last cmd=%#08x\n", + res, res_ex, bus->last_cmd[addr]); + } + } +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_update_rirb); + +/** + * snd_hdac_bus_get_response - receive a response via RIRB + * @bus: HD-audio core bus + * @addr: codec address + * @res: pointer to store the value, NULL when not needed + * + * Returns zero if a value is read, or a negative error code. + */ +int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr, + unsigned int *res) +{ + unsigned long timeout; + unsigned long loopcounter; + + timeout = jiffies + msecs_to_jiffies(1000); + + for (loopcounter = 0;; loopcounter++) { + spin_lock_irq(&bus->reg_lock); + if (!bus->rirb.cmds[addr]) { + if (res) + *res = bus->rirb.res[addr]; /* the last value */ + spin_unlock_irq(&bus->reg_lock); + return 0; + } + spin_unlock_irq(&bus->reg_lock); + if (time_after(jiffies, timeout)) + break; + if (loopcounter > 3000) + msleep(2); /* temporary workaround */ + else { + udelay(10); + cond_resched(); + } + } + + return -EIO; +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_get_response); + +/* + * Lowlevel interface + */ + +/** + * snd_hdac_bus_enter_link_reset - enter link reset + * @bus: HD-audio core bus + * + * Enter to the link reset state. + */ +void snd_hdac_bus_enter_link_reset(struct hdac_bus *bus) +{ + unsigned long timeout; + + /* reset controller */ + snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_RESET, 0); + + timeout = jiffies + msecs_to_jiffies(100); + while ((snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET) && + time_before(jiffies, timeout)) + usleep_range(500, 1000); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_enter_link_reset); + +/** + * snd_hdac_bus_exit_link_reset - exit link reset + * @bus: HD-audio core bus + * + * Exit from the link reset state. + */ +void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus) +{ + unsigned long timeout; + + snd_hdac_chip_updateb(bus, GCTL, 0, AZX_GCTL_RESET); + + timeout = jiffies + msecs_to_jiffies(100); + while (!snd_hdac_chip_readb(bus, GCTL) && time_before(jiffies, timeout)) + usleep_range(500, 1000); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_exit_link_reset); + +/* reset codec link */ +static int azx_reset(struct hdac_bus *bus, bool full_reset) +{ + if (!full_reset) + goto skip_reset; + + /* clear STATESTS */ + snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK); + + /* reset controller */ + snd_hdac_bus_enter_link_reset(bus); + + /* delay for >= 100us for codec PLL to settle per spec + * Rev 0.9 section 5.5.1 + */ + usleep_range(500, 1000); + + /* Bring controller out of reset */ + snd_hdac_bus_exit_link_reset(bus); + + /* Brent Chartrand said to wait >= 540us for codecs to initialize */ + usleep_range(1000, 1200); + + skip_reset: + /* check to see if controller is ready */ + if (!snd_hdac_chip_readb(bus, GCTL)) { + dev_dbg(bus->dev, "azx_reset: controller not ready!\n"); + return -EBUSY; + } + + /* Accept unsolicited responses */ + snd_hdac_chip_updatel(bus, GCTL, 0, AZX_GCTL_UNSOL); + + /* detect codecs */ + if (!bus->codec_mask) { + bus->codec_mask = snd_hdac_chip_readw(bus, STATESTS); + dev_dbg(bus->dev, "codec_mask = 0x%lx\n", bus->codec_mask); + } + + return 0; +} + +/* enable interrupts */ +static void azx_int_enable(struct hdac_bus *bus) +{ + /* enable controller CIE and GIE */ + snd_hdac_chip_updatel(bus, INTCTL, 0, AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN); +} + +/* disable interrupts */ +static void azx_int_disable(struct hdac_bus *bus) +{ + struct hdac_stream *azx_dev; + + /* disable interrupts in stream descriptor */ + list_for_each_entry(azx_dev, &bus->stream_list, list) + snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_INT_MASK, 0); + + /* disable SIE for all streams */ + snd_hdac_chip_writeb(bus, INTCTL, 0); + + /* disable controller CIE and GIE */ + snd_hdac_chip_updatel(bus, INTCTL, AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN, 0); +} + +/* clear interrupts */ +static void azx_int_clear(struct hdac_bus *bus) +{ + struct hdac_stream *azx_dev; + + /* clear stream status */ + list_for_each_entry(azx_dev, &bus->stream_list, list) + snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); + + /* clear STATESTS */ + snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK); + + /* clear rirb status */ + snd_hdac_chip_writeb(bus, RIRBSTS, RIRB_INT_MASK); + + /* clear int status */ + snd_hdac_chip_writel(bus, INTSTS, AZX_INT_CTRL_EN | AZX_INT_ALL_STREAM); +} + +/** + * snd_hdac_bus_init_chip - reset and start the controller registers + * @bus: HD-audio core bus + * @full_reset: Do full reset + */ +bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) +{ + if (bus->chip_init) + return false; + + /* reset controller */ + azx_reset(bus, full_reset); + + /* initialize interrupts */ + azx_int_clear(bus); + azx_int_enable(bus); + + /* initialize the codec command I/O */ + snd_hdac_bus_init_cmd_io(bus); + + /* program the position buffer */ + if (bus->use_posbuf && bus->posbuf.addr) { + snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr); + snd_hdac_chip_writel(bus, DPUBASE, upper_32_bits(bus->posbuf.addr)); + } + + bus->chip_init = true; + return true; +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip); + +/** + * snd_hdac_bus_stop_chip - disable the whole IRQ and I/Os + * @bus: HD-audio core bus + */ +void snd_hdac_bus_stop_chip(struct hdac_bus *bus) +{ + if (!bus->chip_init) + return; + + /* disable interrupts */ + azx_int_disable(bus); + azx_int_clear(bus); + + /* disable CORB/RIRB */ + snd_hdac_bus_stop_cmd_io(bus); + + /* disable position buffer */ + if (bus->posbuf.addr) { + snd_hdac_chip_writel(bus, DPLBASE, 0); + snd_hdac_chip_writel(bus, DPUBASE, 0); + } + + bus->chip_init = false; +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_stop_chip); + +/** + * snd_hdac_bus_handle_stream_irq - interrupt handler for streams + * @bus: HD-audio core bus + * @status: INTSTS register value + * @ask: callback to be called for woken streams + */ +void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status, + void (*ack)(struct hdac_bus *, + struct hdac_stream *)) +{ + struct hdac_stream *azx_dev; + u8 sd_status; + + list_for_each_entry(azx_dev, &bus->stream_list, list) { + if (status & azx_dev->sd_int_sta_mask) { + sd_status = snd_hdac_stream_readb(azx_dev, SD_STS); + snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); + if (!azx_dev->substream || !azx_dev->running || + !(sd_status & SD_INT_COMPLETE)) + continue; + if (ack) + ack(bus, azx_dev); + } + } +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_handle_stream_irq); diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c new file mode 100644 index 000000000000..b513a15c777f --- /dev/null +++ b/sound/hda/hdac_stream.c @@ -0,0 +1,536 @@ +/* + * HD-audio stream operations + */ + +#include +#include +#include +#include +#include +#include +#include + +/** + * snd_hdac_stream_init - initialize each stream (aka device) + * @bus: HD-audio core bus + * @azx_dev: HD-audio core stream object to initialize + * @idx: stream index number + * @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) + * @tag: the tag id to assign + * + * Assign the starting bdl address to each stream (device) and initialize. + */ +void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, + int idx, int direction, int tag) +{ + azx_dev->bus = bus; + if (bus->posbuf.area) + azx_dev->posbuf = (__le32 *)(bus->posbuf.area + idx * 8); + /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ + azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); + /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ + azx_dev->sd_int_sta_mask = 1 << idx; + azx_dev->index = idx; + azx_dev->direction = direction; + azx_dev->stream_tag = tag; + list_add_tail(&azx_dev->list, &bus->stream_list); +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_init); + +/** + * snd_hdac_stream_start - start a stream + * @azx_dev: HD-audio core stream to start + * @fresh_start: false = wallclock timestamp relative to period wallclock + * + * Start a stream, set start_wallclk and set the running flag. + */ +void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) +{ + struct hdac_bus *bus = azx_dev->bus; + + azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); + if (!fresh_start) + azx_dev->start_wallclk -= azx_dev->period_wallclk; + + /* enable SIE */ + snd_hdac_chip_updatel(bus, INTCTL, 0, 1 << azx_dev->index); + /* set DMA start and interrupt mask */ + snd_hdac_stream_updateb(azx_dev, SD_CTL, + 0, SD_CTL_DMA_START | SD_INT_MASK); + azx_dev->running = true; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_start); + +/** + * snd_hdac_stream_clear - stop a stream DMA + * @azx_dev: HD-audio core stream to stop + */ +void snd_hdac_stream_clear(struct hdac_stream *azx_dev) +{ + snd_hdac_stream_updateb(azx_dev, SD_CTL, + SD_CTL_DMA_START | SD_INT_MASK, 0); + snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ + azx_dev->running = false; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_clear); + +/** + * snd_hdac_stream_stop - stop a stream + * @azx_dev: HD-audio core stream to stop + * + * Stop a stream DMA and disable stream interrupt + */ +void snd_hdac_stream_stop(struct hdac_stream *azx_dev) +{ + snd_hdac_stream_clear(azx_dev); + /* disable SIE */ + snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); + +/** + * snd_hdac_stream_reset - reset a stream + * @azx_dev: HD-audio core stream to reset + */ +void snd_hdac_stream_reset(struct hdac_stream *azx_dev) +{ + unsigned char val; + int timeout; + + snd_hdac_stream_clear(azx_dev); + + snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); + udelay(3); + timeout = 300; + do { + val = snd_hdac_stream_readb(azx_dev, SD_CTL) & + SD_CTL_STREAM_RESET; + if (val) + break; + } while (--timeout); + val &= ~SD_CTL_STREAM_RESET; + snd_hdac_stream_writeb(azx_dev, SD_CTL, val); + udelay(3); + + timeout = 300; + /* waiting for hardware to report that the stream is out of reset */ + do { + val = snd_hdac_stream_readb(azx_dev, SD_CTL) & + SD_CTL_STREAM_RESET; + if (!val) + break; + } while (--timeout); + + /* reset first position - may not be synced with hw at this time */ + if (azx_dev->posbuf) + *azx_dev->posbuf = 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); + +/** + * snd_hdac_stream_setup - set up the SD for streaming + * @azx_dev: HD-audio core stream to set up + */ +int snd_hdac_stream_setup(struct hdac_stream *azx_dev) +{ + struct hdac_bus *bus = azx_dev->bus; + struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; + unsigned int val; + + /* make sure the run bit is zero for SD */ + snd_hdac_stream_clear(azx_dev); + /* program the stream_tag */ + val = snd_hdac_stream_readl(azx_dev, SD_CTL); + val = (val & ~SD_CTL_STREAM_TAG_MASK) | + (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); + if (!bus->snoop) + val |= SD_CTL_TRAFFIC_PRIO; + snd_hdac_stream_writel(azx_dev, SD_CTL, val); + + /* program the length of samples in cyclic buffer */ + snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); + + /* program the stream format */ + /* this value needs to be the same as the one programmed */ + snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); + + /* program the stream LVI (last valid index) of the BDL */ + snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); + + /* program the BDL address */ + /* lower BDL address */ + snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr); + /* upper BDL address */ + snd_hdac_stream_writel(azx_dev, SD_BDLPU, + upper_32_bits(azx_dev->bdl.addr)); + + /* enable the position buffer */ + if (bus->use_posbuf && bus->posbuf.addr) { + if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) + snd_hdac_chip_writel(bus, DPLBASE, + (u32)bus->posbuf.addr | AZX_DPLBASE_ENABLE); + } + + /* set the interrupt enable bits in the descriptor control register */ + snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); + + if (azx_dev->direction == SNDRV_PCM_STREAM_PLAYBACK) + azx_dev->fifo_size = + snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1; + else + azx_dev->fifo_size = 0; + + /* when LPIB delay correction gives a small negative value, + * we ignore it; currently set the threshold statically to + * 64 frames + */ + if (runtime->period_size > 64) + azx_dev->delay_negative_threshold = + -frames_to_bytes(runtime, 64); + else + azx_dev->delay_negative_threshold = 0; + + /* wallclk has 24Mhz clock source */ + azx_dev->period_wallclk = (((runtime->period_size * 24000) / + runtime->rate) * 1000); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); + +/** + * snd_hdac_stream_cleanup - cleanup a stream + * @azx_dev: HD-audio core stream to clean up + */ +void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) +{ + snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); + snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); + snd_hdac_stream_writel(azx_dev, SD_CTL, 0); + azx_dev->bufsize = 0; + azx_dev->period_bytes = 0; + azx_dev->format_val = 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); + +/** + * snd_hdac_stream_assign - assign a stream for the PCM + * @bus: HD-audio core bus + * @substream: PCM substream to assign + * + * Look for an unused stream for the given PCM substream, assign it + * and return the stream object. If no stream is free, returns NULL. + * The function tries to keep using the same stream object when it's used + * beforehand. Also, when bus->reverse_assign flag is set, the last free + * or matching entry is returned. This is needed for some strange codecs. + */ +struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, + struct snd_pcm_substream *substream) +{ + struct hdac_stream *azx_dev; + struct hdac_stream *res = NULL; + + /* make a non-zero unique key for the substream */ + int key = (substream->pcm->device << 16) | (substream->number << 2) | + (substream->stream + 1); + + list_for_each_entry(azx_dev, &bus->stream_list, list) { + if (azx_dev->direction != substream->stream) + continue; + if (azx_dev->opened) + continue; + if (azx_dev->assigned_key == key) { + res = azx_dev; + break; + } + if (!res || bus->reverse_assign) + res = azx_dev; + } + if (res) { + spin_lock_irq(&bus->reg_lock); + res->opened = 1; + res->running = 0; + res->assigned_key = key; + res->substream = substream; + spin_unlock_irq(&bus->reg_lock); + } + return res; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); + +/** + * snd_hdac_stream_release - release the assigned stream + * @azx_dev: HD-audio core stream to release + * + * Release the stream that has been assigned by snd_hdac_stream_assign(). + */ +void snd_hdac_stream_release(struct hdac_stream *azx_dev) +{ + struct hdac_bus *bus = azx_dev->bus; + + spin_lock_irq(&bus->reg_lock); + azx_dev->opened = 0; + azx_dev->running = 0; + azx_dev->substream = NULL; + spin_unlock_irq(&bus->reg_lock); +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_release); + +/* + * set up a BDL entry + */ +static int setup_bdle(struct hdac_bus *bus, + struct snd_dma_buffer *dmab, + struct hdac_stream *azx_dev, __le32 **bdlp, + int ofs, int size, int with_ioc) +{ + __le32 *bdl = *bdlp; + + while (size > 0) { + dma_addr_t addr; + int chunk; + + if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) + return -EINVAL; + + addr = snd_sgbuf_get_addr(dmab, ofs); + /* program the address field of the BDL entry */ + bdl[0] = cpu_to_le32((u32)addr); + bdl[1] = cpu_to_le32(upper_32_bits(addr)); + /* program the size field of the BDL entry */ + chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); + /* one BDLE cannot cross 4K boundary on CTHDA chips */ + if (bus->align_bdle_4k) { + u32 remain = 0x1000 - (ofs & 0xfff); + + if (chunk > remain) + chunk = remain; + } + bdl[2] = cpu_to_le32(chunk); + /* program the IOC to enable interrupt + * only when the whole fragment is processed + */ + size -= chunk; + bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); + bdl += 4; + azx_dev->frags++; + ofs += chunk; + } + *bdlp = bdl; + return ofs; +} + +/** + * snd_hdac_stream_setup_periods - set up BDL entries + * @azx_dev: HD-audio core stream to set up + * + * Set up the buffer descriptor table of the given stream based on the + * period and buffer sizes of the assigned PCM substream. + */ +int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) +{ + struct hdac_bus *bus = azx_dev->bus; + struct snd_pcm_substream *substream = azx_dev->substream; + struct snd_pcm_runtime *runtime = substream->runtime; + __le32 *bdl; + int i, ofs, periods, period_bytes; + int pos_adj, pos_align; + + /* reset BDL address */ + snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); + snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); + + period_bytes = azx_dev->period_bytes; + periods = azx_dev->bufsize / period_bytes; + + /* program the initial BDL entries */ + bdl = (__le32 *)azx_dev->bdl.area; + ofs = 0; + azx_dev->frags = 0; + + pos_adj = bus->bdl_pos_adj; + if (!azx_dev->no_period_wakeup && pos_adj > 0) { + pos_align = pos_adj; + pos_adj = (pos_adj * runtime->rate + 47999) / 48000; + if (!pos_adj) + pos_adj = pos_align; + else + pos_adj = ((pos_adj + pos_align - 1) / pos_align) * + pos_align; + pos_adj = frames_to_bytes(runtime, pos_adj); + if (pos_adj >= period_bytes) { + dev_warn(bus->dev, "Too big adjustment %d\n", + pos_adj); + pos_adj = 0; + } else { + ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), + azx_dev, + &bdl, ofs, pos_adj, true); + if (ofs < 0) + goto error; + } + } else + pos_adj = 0; + + for (i = 0; i < periods; i++) { + if (i == periods - 1 && pos_adj) + ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), + azx_dev, &bdl, ofs, + period_bytes - pos_adj, 0); + else + ofs = setup_bdle(bus, snd_pcm_get_dma_buf(substream), + azx_dev, &bdl, ofs, + period_bytes, + !azx_dev->no_period_wakeup); + if (ofs < 0) + goto error; + } + return 0; + + error: + dev_err(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", + azx_dev->bufsize, period_bytes); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); + +static cycle_t azx_cc_read(const struct cyclecounter *cc) +{ + struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); + + return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); +} + +static void azx_timecounter_init(struct hdac_stream *azx_dev, + bool force, cycle_t last) +{ + struct timecounter *tc = &azx_dev->tc; + struct cyclecounter *cc = &azx_dev->cc; + u64 nsec; + + cc->read = azx_cc_read; + cc->mask = CLOCKSOURCE_MASK(32); + + /* + * Converting from 24 MHz to ns means applying a 125/3 factor. + * To avoid any saturation issues in intermediate operations, + * the 125 factor is applied first. The division is applied + * last after reading the timecounter value. + * Applying the 1/3 factor as part of the multiplication + * requires at least 20 bits for a decent precision, however + * overflows occur after about 4 hours or less, not a option. + */ + + cc->mult = 125; /* saturation after 195 years */ + cc->shift = 0; + + nsec = 0; /* audio time is elapsed time since trigger */ + timecounter_init(tc, cc, nsec); + if (force) { + /* + * force timecounter to use predefined value, + * used for synchronized starts + */ + tc->cycle_last = last; + } +} + +/** + * snd_hdac_stream_timecounter_init - initialize time counter + * @azx_dev: HD-audio core stream (master stream) + * @streams: bit flags of streams to set up + * + * Initializes the time counter of streams marked by the bit flags (each + * bit corresponds to the stream index). + * The trigger timestamp of PCM substream assigned to the given stream is + * updated accordingly, too. + */ +void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, + unsigned int streams) +{ + struct hdac_bus *bus = azx_dev->bus; + struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; + struct hdac_stream *s; + bool inited = false; + cycle_t cycle_last = 0; + int i = 0; + + list_for_each_entry(s, &bus->stream_list, list) { + if (streams & (1 << i)) { + azx_timecounter_init(s, inited, cycle_last); + if (!inited) { + inited = true; + cycle_last = s->tc.cycle_last; + } + } + i++; + } + + snd_pcm_gettime(runtime, &runtime->trigger_tstamp); + runtime->trigger_tstamp_latched = true; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); + +/** + * snd_hdac_stream_sync_trigger - turn on/off stream sync register + * @azx_dev: HD-audio core stream (master stream) + * @streams: bit flags of streams to sync + */ +void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, + unsigned int streams, unsigned int reg) +{ + struct hdac_bus *bus = azx_dev->bus; + unsigned int val; + + if (!reg) + reg = AZX_REG_SSYNC; + val = _snd_hdac_chip_read(l, bus, reg); + if (set) + val |= streams; + else + val &= ~streams; + _snd_hdac_chip_write(l, bus, reg, val); +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); + +/** + * snd_hdac_stream_sync - sync with start/strop trigger operation + * @azx_dev: HD-audio core stream (master stream) + * @start: true = start, false = stop + * @streams: bit flags of streams to sync + * + * For @start = true, wait until all FIFOs get ready. + * For @start = false, wait until all RUN bits are cleared. + */ +void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, + unsigned int streams) +{ + struct hdac_bus *bus = azx_dev->bus; + int i, nwait, timeout; + struct hdac_stream *s; + + for (timeout = 5000; timeout; timeout--) { + nwait = 0; + i = 0; + list_for_each_entry(s, &bus->stream_list, list) { + if (streams & (1 << i)) { + if (start) { + /* check FIFO gets ready */ + if (!(snd_hdac_stream_readb(s, SD_STS) & + SD_STS_FIFO_READY)) + nwait++; + } else { + /* check RUN bit is cleared */ + if (snd_hdac_stream_readb(s, SD_CTL) & + SD_CTL_DMA_START) + nwait++; + } + } + i++; + } + if (!nwait) + break; + cpu_relax(); + } +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c13d5c3e1d03..b86e2f449e56 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -550,7 +550,7 @@ int snd_hda_bus_new(struct snd_card *card, if (!bus) return -ENOMEM; - err = snd_hdac_bus_init(&bus->core, card->dev, &bus_ops); + err = snd_hdac_bus_init(&bus->core, card->dev, &bus_ops, NULL); if (err < 0) { kfree(bus); return err; diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index be1b7ded8d82..15a796c21b9d 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -21,135 +21,10 @@ #include #include #include "hda_codec.h" +#include -/* - * registers - */ -#define AZX_REG_GCAP 0x00 -#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ -#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ -#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ -#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ -#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ -#define AZX_REG_VMIN 0x02 -#define AZX_REG_VMAJ 0x03 -#define AZX_REG_OUTPAY 0x04 -#define AZX_REG_INPAY 0x06 -#define AZX_REG_GCTL 0x08 -#define AZX_GCTL_RESET (1 << 0) /* controller reset */ -#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ -#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ -#define AZX_REG_WAKEEN 0x0c -#define AZX_REG_STATESTS 0x0e -#define AZX_REG_GSTS 0x10 -#define AZX_GSTS_FSTS (1 << 1) /* flush status */ -#define AZX_REG_INTCTL 0x20 -#define AZX_REG_INTSTS 0x24 -#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ -#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ -#define AZX_REG_SSYNC 0x38 -#define AZX_REG_CORBLBASE 0x40 -#define AZX_REG_CORBUBASE 0x44 -#define AZX_REG_CORBWP 0x48 -#define AZX_REG_CORBRP 0x4a -#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ -#define AZX_REG_CORBCTL 0x4c -#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ -#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ -#define AZX_REG_CORBSTS 0x4d -#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ -#define AZX_REG_CORBSIZE 0x4e - -#define AZX_REG_RIRBLBASE 0x50 -#define AZX_REG_RIRBUBASE 0x54 -#define AZX_REG_RIRBWP 0x58 -#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ -#define AZX_REG_RINTCNT 0x5a -#define AZX_REG_RIRBCTL 0x5c -#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ -#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ -#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ -#define AZX_REG_RIRBSTS 0x5d -#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ -#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ -#define AZX_REG_RIRBSIZE 0x5e - -#define AZX_REG_IC 0x60 -#define AZX_REG_IR 0x64 -#define AZX_REG_IRS 0x68 -#define AZX_IRS_VALID (1<<1) -#define AZX_IRS_BUSY (1<<0) - -#define AZX_REG_DPLBASE 0x70 -#define AZX_REG_DPUBASE 0x74 -#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ - -/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ -enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; - -/* stream register offsets from stream base */ -#define AZX_REG_SD_CTL 0x00 -#define AZX_REG_SD_STS 0x03 -#define AZX_REG_SD_LPIB 0x04 -#define AZX_REG_SD_CBL 0x08 -#define AZX_REG_SD_LVI 0x0c -#define AZX_REG_SD_FIFOW 0x0e -#define AZX_REG_SD_FIFOSIZE 0x10 -#define AZX_REG_SD_FORMAT 0x12 -#define AZX_REG_SD_BDLPL 0x18 -#define AZX_REG_SD_BDLPU 0x1c - -/* PCI space */ -#define AZX_PCIREG_TCSEL 0x44 - -/* - * other constants - */ - -/* max number of fragments - we may use more if allocating more pages for BDL */ -#define BDL_SIZE 4096 -#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) -#define AZX_MAX_FRAG 32 -/* max buffer size - no h/w limit, you can increase as you like */ -#define AZX_MAX_BUF_SIZE (1024*1024*1024) - -/* RIRB int mask: overrun[2], response[0] */ -#define RIRB_INT_RESPONSE 0x01 -#define RIRB_INT_OVERRUN 0x04 -#define RIRB_INT_MASK 0x05 - -/* STATESTS int mask: S3,SD2,SD1,SD0 */ -#define AZX_MAX_CODECS 8 +#define AZX_MAX_CODECS HDA_MAX_CODECS #define AZX_DEFAULT_CODECS 4 -#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) - -/* SD_CTL bits */ -#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ -#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ -#define SD_CTL_STRIPE (3 << 16) /* stripe control */ -#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ -#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ -#define SD_CTL_STREAM_TAG_MASK (0xf << 20) -#define SD_CTL_STREAM_TAG_SHIFT 20 - -/* SD_CTL and SD_STS */ -#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ -#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ -#define SD_INT_COMPLETE 0x04 /* completion interrupt */ -#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ - SD_INT_COMPLETE) - -/* SD_STS */ -#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ - -/* INTCTL and INTSTS */ -#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ -#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ -#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ - -/* below are so far hardcoded - should read registers in future */ -#define AZX_MAX_CORB_ENTRIES 256 -#define AZX_MAX_RIRB_ENTRIES 256 /* driver quirks (capabilities) */ /* bits 0-7 are used for indicating driver type */ @@ -183,9 +58,6 @@ enum { AZX_SNOOP_TYPE_NVIDIA, }; -/* HD Audio class code */ -#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 - struct azx_dev { struct snd_dma_buffer bdl; /* BDL buffer */ u32 *posbuf; /* position buffer pointer */ -- cgit v1.2.3 From 8f3f600b52b100f254fc16a60af1261d2e4dc239 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Apr 2015 12:53:28 +0200 Subject: ALSA: hda - Add DSP loader to core library code Copied from the legacy driver code, no transition done yet. Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 46 ++++++++++++++++++++ sound/hda/Kconfig | 3 ++ sound/hda/hdac_stream.c | 113 ++++++++++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/Kconfig | 3 -- 4 files changed, 162 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 9349ccf15a36..69f27bc49eb4 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -187,6 +187,11 @@ struct hdac_io_ops { u16 (*reg_readw)(u16 __iomem *addr); void (*reg_writeb)(u8 value, u8 __iomem *addr); u8 (*reg_readb)(u8 __iomem *addr); + /* Allocation ops */ + int (*dma_alloc_pages)(struct hdac_bus *bus, int type, size_t size, + struct snd_dma_buffer *buf); + void (*dma_free_pages)(struct hdac_bus *bus, + struct snd_dma_buffer *buf); }; #define HDA_UNSOL_QUEUE_SIZE 64 @@ -374,6 +379,7 @@ struct hdac_stream { bool opened:1; bool running:1; bool no_period_wakeup:1; + bool locked:1; /* timestamp */ unsigned long start_wallclk; /* start + minimum wallclk */ @@ -383,6 +389,10 @@ struct hdac_stream { int delay_negative_threshold; struct list_head list; +#ifdef CONFIG_SND_HDA_DSP_LOADER + /* DSP access mutex */ + struct mutex dsp_mutex; +#endif }; void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, @@ -440,6 +450,42 @@ void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, (snd_hdac_stream_readb(dev, reg) & \ ~(mask)) | (val)) +#ifdef CONFIG_SND_HDA_DSP_LOADER +/* DSP lock helpers */ +#define snd_hdac_dsp_lock_init(dev) mutex_init(&(dev)->dsp_mutex) +#define snd_hdac_dsp_lock(dev) mutex_lock(&(dev)->dsp_mutex) +#define snd_hdac_dsp_unlock(dev) mutex_unlock(&(dev)->dsp_mutex) +#define snd_hdac_stream_is_locked(dev) ((dev)->locked) +/* DSP loader helpers */ +int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, + unsigned int byte_size, struct snd_dma_buffer *bufp); +void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start); +void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, + struct snd_dma_buffer *dmab); +#else /* CONFIG_SND_HDA_DSP_LOADER */ +#define snd_hdac_dsp_lock_init(dev) do {} while (0) +#define snd_hdac_dsp_lock(dev) do {} while (0) +#define snd_hdac_dsp_unlock(dev) do {} while (0) +#define snd_hdac_stream_is_locked(dev) 0 + +static inline int +snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, + unsigned int byte_size, struct snd_dma_buffer *bufp) +{ + return 0; +} + +static inline void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) +{ +} + +static inline void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, + struct snd_dma_buffer *dmab) +{ +} +#endif /* CONFIG_SND_HDA_DSP_LOADER */ + + /* * generic array helpers */ diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig index 001c6588a5ff..7a17fca4f627 100644 --- a/sound/hda/Kconfig +++ b/sound/hda/Kconfig @@ -1,3 +1,6 @@ config SND_HDA_CORE tristate select REGMAP + +config SND_HDA_DSP_LOADER + bool diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index b513a15c777f..7f6b845d90eb 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -33,6 +33,7 @@ void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, azx_dev->index = idx; azx_dev->direction = direction; azx_dev->stream_tag = tag; + snd_hdac_dsp_lock_init(azx_dev); list_add_tail(&azx_dev->list, &bus->stream_list); } EXPORT_SYMBOL_GPL(snd_hdac_stream_init); @@ -534,3 +535,115 @@ void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, } } EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); + +#ifdef CONFIG_SND_HDA_DSP_LOADER +/** + * snd_hdac_dsp_prepare - prepare for DSP loading + * @azx_dev: HD-audio core stream used for DSP loading + * @format: HD-audio stream format + * @byte_size: data chunk byte size + * @bufp: allocated buffer + * + * Allocate the buffer for the given size and set up the given stream for + * DSP loading. Returns the stream tag (>= 0), or a negative error code. + */ +int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, + unsigned int byte_size, struct snd_dma_buffer *bufp) +{ + struct hdac_bus *bus = azx_dev->bus; + u32 *bdl; + int err; + + snd_hdac_dsp_lock(azx_dev); + spin_lock_irq(&bus->reg_lock); + if (azx_dev->running || azx_dev->locked) { + spin_unlock_irq(&bus->reg_lock); + err = -EBUSY; + goto unlock; + } + azx_dev->locked = true; + spin_unlock_irq(&bus->reg_lock); + + err = bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV_SG, + byte_size, bufp); + if (err < 0) + goto err_alloc; + + azx_dev->bufsize = byte_size; + azx_dev->period_bytes = byte_size; + azx_dev->format_val = format; + + snd_hdac_stream_reset(azx_dev); + + /* reset BDL address */ + snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); + snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); + + azx_dev->frags = 0; + bdl = (u32 *)azx_dev->bdl.area; + err = setup_bdle(bus, bufp, azx_dev, &bdl, 0, byte_size, 0); + if (err < 0) + goto error; + + snd_hdac_stream_setup(azx_dev); + snd_hdac_dsp_unlock(azx_dev); + return azx_dev->stream_tag; + + error: + bus->io_ops->dma_free_pages(bus, bufp); + err_alloc: + spin_lock_irq(&bus->reg_lock); + azx_dev->locked = false; + spin_unlock_irq(&bus->reg_lock); + unlock: + snd_hdac_dsp_unlock(azx_dev); + return err; +} +EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); + +/** + * snd_hdac_dsp_trigger - start / stop DSP loading + * @azx_dev: HD-audio core stream used for DSP loading + * @start: trigger start or stop + */ +void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) +{ + if (start) + snd_hdac_stream_start(azx_dev, true); + else + snd_hdac_stream_stop(azx_dev); +} +EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); + +/** + * snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal + * @azx_dev: HD-audio core stream used for DSP loading + * @dmab: buffer used by DSP loading + */ +void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, + struct snd_dma_buffer *dmab) +{ + struct hdac_bus *bus = azx_dev->bus; + + if (!dmab->area || !azx_dev->locked) + return; + + snd_hdac_dsp_lock(azx_dev); + /* reset BDL address */ + snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); + snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); + snd_hdac_stream_writel(azx_dev, SD_CTL, 0); + azx_dev->bufsize = 0; + azx_dev->period_bytes = 0; + azx_dev->format_val = 0; + + bus->io_ops->dma_free_pages(bus, dmab); + dmab->area = NULL; + + spin_lock_irq(&bus->reg_lock); + azx_dev->locked = false; + spin_unlock_irq(&bus->reg_lock); + snd_hdac_dsp_unlock(azx_dev); +} +EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); +#endif /* CONFIG_SND_HDA_DSP_LOADER */ diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index a5ed1c181784..47aa7b8b7519 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -38,9 +38,6 @@ config SND_HDA_TEGRA if SND_HDA -config SND_HDA_DSP_LOADER - bool - config SND_HDA_PREALLOC_SIZE int "Pre-allocated buffer size for HD-audio driver" range 0 32768 -- cgit v1.2.3 From 304dad30388d017544bc2e90fe4fefcca94263d3 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Sun, 12 Apr 2015 18:06:13 +0530 Subject: ALSA: hda - moved alloc/free stream pages function to controller library Moved azx_alloc_stream_pages and azx_free_stream_pages to controller library. Signed-off-by: Jeeja KP Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 3 +++ sound/hda/hdac_controller.c | 58 +++++++++++++++++++++++++++++++++++++++++++++ sound/hda/hdac_stream.c | 2 -- 3 files changed, 61 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 69f27bc49eb4..59d21848a472 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -314,6 +314,9 @@ void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status, void (*ack)(struct hdac_bus *, struct hdac_stream *)); +int snd_hdac_bus_alloc_stream_pages(struct hdac_bus *bus); +void snd_hdac_bus_free_stream_pages(struct hdac_bus *bus); + /* * macros for easy use */ diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index c0069d0b7875..b5a17cb510a0 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -447,3 +447,61 @@ void snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status, } } EXPORT_SYMBOL_GPL(snd_hdac_bus_handle_stream_irq); + +/** + * snd_hdac_bus_alloc_stream_pages - allocate BDL and other buffers + * @bus: HD-audio core bus + * + * Call this after assigning the all streams. + * Returns zero for success, or a negative error code. + */ +int snd_hdac_bus_alloc_stream_pages(struct hdac_bus *bus) +{ + struct hdac_stream *s; + int num_streams = 0; + int err; + + list_for_each_entry(s, &bus->stream_list, list) { + /* allocate memory for the BDL for each stream */ + err = bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV, + BDL_SIZE, &s->bdl); + num_streams++; + if (err < 0) + return -ENOMEM; + } + + if (WARN_ON(!num_streams)) + return -EINVAL; + /* allocate memory for the position buffer */ + err = bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV, + num_streams * 8, &bus->posbuf); + if (err < 0) + return -ENOMEM; + list_for_each_entry(s, &bus->stream_list, list) + s->posbuf = (__le32 *)(bus->posbuf.area + s->index * 8); + + /* single page (at least 4096 bytes) must suffice for both ringbuffes */ + return bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV, + PAGE_SIZE, &bus->rb); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_alloc_stream_pages); + +/** + * snd_hdac_bus_free_stream_pages - release BDL and other buffers + * @bus: HD-audio core bus + */ +void snd_hdac_bus_free_stream_pages(struct hdac_bus *bus) +{ + struct hdac_stream *s; + + list_for_each_entry(s, &bus->stream_list, list) { + if (s->bdl.area) + bus->io_ops->dma_free_pages(bus, &s->bdl); + } + + if (bus->rb.area) + bus->io_ops->dma_free_pages(bus, &bus->rb); + if (bus->posbuf.area) + bus->io_ops->dma_free_pages(bus, &bus->posbuf); +} +EXPORT_SYMBOL_GPL(snd_hdac_bus_free_stream_pages); diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index 7f6b845d90eb..8bd67a824b5e 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -24,8 +24,6 @@ void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, int idx, int direction, int tag) { azx_dev->bus = bus; - if (bus->posbuf.area) - azx_dev->posbuf = (__le32 *)(bus->posbuf.area + idx * 8); /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ -- cgit v1.2.3 From b7d023e11434131e5a7ceb4be33c3afa2c855e89 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 16 Apr 2015 08:19:06 +0200 Subject: ALSA: hda - Move PCM format and rate handling code to core library Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 9 ++ sound/hda/hdac_device.c | 300 ++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_codec.c | 305 ----------------------------------------- sound/pci/hda/hda_codec.h | 15 +- sound/pci/hda/hda_controller.c | 3 +- sound/pci/hda/patch_ca0132.c | 7 +- 6 files changed, 317 insertions(+), 322 deletions(-) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 59d21848a472..15bc039de78d 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -123,6 +123,15 @@ int snd_hdac_get_connections(struct hdac_device *codec, hda_nid_t nid, hda_nid_t *conn_list, int max_conns); int snd_hdac_get_sub_nodes(struct hdac_device *codec, hda_nid_t nid, hda_nid_t *start_id); +unsigned int snd_hdac_calc_stream_format(unsigned int rate, + unsigned int channels, + unsigned int format, + unsigned int maxbps, + unsigned short spdif_ctls); +int snd_hdac_query_supported_pcm(struct hdac_device *codec, hda_nid_t nid, + u32 *ratesp, u64 *formatsp, unsigned int *bpsp); +bool snd_hdac_is_supported_format(struct hdac_device *codec, hda_nid_t nid, + unsigned int format); /** * snd_hdac_read_parm - read a codec parameter diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index f75bf5622687..55c7d086b9dd 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "local.h" static void setup_fg_nodes(struct hdac_device *codec); @@ -597,3 +598,302 @@ static int get_codec_vendor_name(struct hdac_device *codec) codec->vendor_name = kasprintf(GFP_KERNEL, "Generic %04x", vendor_id); return codec->vendor_name ? 0 : -ENOMEM; } + +/* + * stream formats + */ +struct hda_rate_tbl { + unsigned int hz; + unsigned int alsa_bits; + unsigned int hda_fmt; +}; + +/* rate = base * mult / div */ +#define HDA_RATE(base, mult, div) \ + (AC_FMT_BASE_##base##K | (((mult) - 1) << AC_FMT_MULT_SHIFT) | \ + (((div) - 1) << AC_FMT_DIV_SHIFT)) + +static struct hda_rate_tbl rate_bits[] = { + /* rate in Hz, ALSA rate bitmask, HDA format value */ + + /* autodetected value used in snd_hda_query_supported_pcm */ + { 8000, SNDRV_PCM_RATE_8000, HDA_RATE(48, 1, 6) }, + { 11025, SNDRV_PCM_RATE_11025, HDA_RATE(44, 1, 4) }, + { 16000, SNDRV_PCM_RATE_16000, HDA_RATE(48, 1, 3) }, + { 22050, SNDRV_PCM_RATE_22050, HDA_RATE(44, 1, 2) }, + { 32000, SNDRV_PCM_RATE_32000, HDA_RATE(48, 2, 3) }, + { 44100, SNDRV_PCM_RATE_44100, HDA_RATE(44, 1, 1) }, + { 48000, SNDRV_PCM_RATE_48000, HDA_RATE(48, 1, 1) }, + { 88200, SNDRV_PCM_RATE_88200, HDA_RATE(44, 2, 1) }, + { 96000, SNDRV_PCM_RATE_96000, HDA_RATE(48, 2, 1) }, + { 176400, SNDRV_PCM_RATE_176400, HDA_RATE(44, 4, 1) }, + { 192000, SNDRV_PCM_RATE_192000, HDA_RATE(48, 4, 1) }, +#define AC_PAR_PCM_RATE_BITS 11 + /* up to bits 10, 384kHZ isn't supported properly */ + + /* not autodetected value */ + { 9600, SNDRV_PCM_RATE_KNOT, HDA_RATE(48, 1, 5) }, + + { 0 } /* terminator */ +}; + +/** + * snd_hdac_calc_stream_format - calculate the format bitset + * @rate: the sample rate + * @channels: the number of channels + * @format: the PCM format (SNDRV_PCM_FORMAT_XXX) + * @maxbps: the max. bps + * @spdif_ctls: HD-audio SPDIF status bits (0 if irrelevant) + * + * Calculate the format bitset from the given rate, channels and th PCM format. + * + * Return zero if invalid. + */ +unsigned int snd_hdac_calc_stream_format(unsigned int rate, + unsigned int channels, + unsigned int format, + unsigned int maxbps, + unsigned short spdif_ctls) +{ + int i; + unsigned int val = 0; + + for (i = 0; rate_bits[i].hz; i++) + if (rate_bits[i].hz == rate) { + val = rate_bits[i].hda_fmt; + break; + } + if (!rate_bits[i].hz) + return 0; + + if (channels == 0 || channels > 8) + return 0; + val |= channels - 1; + + switch (snd_pcm_format_width(format)) { + case 8: + val |= AC_FMT_BITS_8; + break; + case 16: + val |= AC_FMT_BITS_16; + break; + case 20: + case 24: + case 32: + if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE) + val |= AC_FMT_BITS_32; + else if (maxbps >= 24) + val |= AC_FMT_BITS_24; + else + val |= AC_FMT_BITS_20; + break; + default: + return 0; + } + + if (spdif_ctls & AC_DIG1_NONAUDIO) + val |= AC_FMT_TYPE_NON_PCM; + + return val; +} +EXPORT_SYMBOL_GPL(snd_hdac_calc_stream_format); + +static unsigned int query_pcm_param(struct hdac_device *codec, hda_nid_t nid) +{ + unsigned int val = 0; + + if (nid != codec->afg && + (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) + val = snd_hdac_read_parm(codec, nid, AC_PAR_PCM); + if (!val || val == -1) + val = snd_hdac_read_parm(codec, codec->afg, AC_PAR_PCM); + if (!val || val == -1) + return 0; + return val; +} + +static unsigned int query_stream_param(struct hdac_device *codec, hda_nid_t nid) +{ + unsigned int streams = snd_hdac_read_parm(codec, nid, AC_PAR_STREAM); + + if (!streams || streams == -1) + streams = snd_hdac_read_parm(codec, codec->afg, AC_PAR_STREAM); + if (!streams || streams == -1) + return 0; + return streams; +} + +/** + * snd_hdac_query_supported_pcm - query the supported PCM rates and formats + * @codec: the codec object + * @nid: NID to query + * @ratesp: the pointer to store the detected rate bitflags + * @formatsp: the pointer to store the detected formats + * @bpsp: the pointer to store the detected format widths + * + * Queries the supported PCM rates and formats. The NULL @ratesp, @formatsp + * or @bsps argument is ignored. + * + * Returns 0 if successful, otherwise a negative error code. + */ +int snd_hdac_query_supported_pcm(struct hdac_device *codec, hda_nid_t nid, + u32 *ratesp, u64 *formatsp, unsigned int *bpsp) +{ + unsigned int i, val, wcaps; + + wcaps = get_wcaps(codec, nid); + val = query_pcm_param(codec, nid); + + if (ratesp) { + u32 rates = 0; + for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) { + if (val & (1 << i)) + rates |= rate_bits[i].alsa_bits; + } + if (rates == 0) { + dev_err(&codec->dev, + "rates == 0 (nid=0x%x, val=0x%x, ovrd=%i)\n", + nid, val, + (wcaps & AC_WCAP_FORMAT_OVRD) ? 1 : 0); + return -EIO; + } + *ratesp = rates; + } + + if (formatsp || bpsp) { + u64 formats = 0; + unsigned int streams, bps; + + streams = query_stream_param(codec, nid); + if (!streams) + return -EIO; + + bps = 0; + if (streams & AC_SUPFMT_PCM) { + if (val & AC_SUPPCM_BITS_8) { + formats |= SNDRV_PCM_FMTBIT_U8; + bps = 8; + } + if (val & AC_SUPPCM_BITS_16) { + formats |= SNDRV_PCM_FMTBIT_S16_LE; + bps = 16; + } + if (wcaps & AC_WCAP_DIGITAL) { + if (val & AC_SUPPCM_BITS_32) + formats |= SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE; + if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24)) + formats |= SNDRV_PCM_FMTBIT_S32_LE; + if (val & AC_SUPPCM_BITS_24) + bps = 24; + else if (val & AC_SUPPCM_BITS_20) + bps = 20; + } else if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24| + AC_SUPPCM_BITS_32)) { + formats |= SNDRV_PCM_FMTBIT_S32_LE; + if (val & AC_SUPPCM_BITS_32) + bps = 32; + else if (val & AC_SUPPCM_BITS_24) + bps = 24; + else if (val & AC_SUPPCM_BITS_20) + bps = 20; + } + } +#if 0 /* FIXME: CS4206 doesn't work, which is the only codec supporting float */ + if (streams & AC_SUPFMT_FLOAT32) { + formats |= SNDRV_PCM_FMTBIT_FLOAT_LE; + if (!bps) + bps = 32; + } +#endif + if (streams == AC_SUPFMT_AC3) { + /* should be exclusive */ + /* temporary hack: we have still no proper support + * for the direct AC3 stream... + */ + formats |= SNDRV_PCM_FMTBIT_U8; + bps = 8; + } + if (formats == 0) { + dev_err(&codec->dev, + "formats == 0 (nid=0x%x, val=0x%x, ovrd=%i, streams=0x%x)\n", + nid, val, + (wcaps & AC_WCAP_FORMAT_OVRD) ? 1 : 0, + streams); + return -EIO; + } + if (formatsp) + *formatsp = formats; + if (bpsp) + *bpsp = bps; + } + + return 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_query_supported_pcm); + +/** + * snd_hdac_is_supported_format - Check the validity of the format + * @codec: the codec object + * @nid: NID to check + * @format: the HD-audio format value to check + * + * Check whether the given node supports the format value. + * + * Returns true if supported, false if not. + */ +bool snd_hdac_is_supported_format(struct hdac_device *codec, hda_nid_t nid, + unsigned int format) +{ + int i; + unsigned int val = 0, rate, stream; + + val = query_pcm_param(codec, nid); + if (!val) + return false; + + rate = format & 0xff00; + for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) + if (rate_bits[i].hda_fmt == rate) { + if (val & (1 << i)) + break; + return false; + } + if (i >= AC_PAR_PCM_RATE_BITS) + return false; + + stream = query_stream_param(codec, nid); + if (!stream) + return false; + + if (stream & AC_SUPFMT_PCM) { + switch (format & 0xf0) { + case 0x00: + if (!(val & AC_SUPPCM_BITS_8)) + return false; + break; + case 0x10: + if (!(val & AC_SUPPCM_BITS_16)) + return false; + break; + case 0x20: + if (!(val & AC_SUPPCM_BITS_20)) + return false; + break; + case 0x30: + if (!(val & AC_SUPPCM_BITS_24)) + return false; + break; + case 0x40: + if (!(val & AC_SUPPCM_BITS_32)) + return false; + break; + default: + return false; + } + } else { + /* FIXME: check for float32 and AC3? */ + } + + return true; +} +EXPORT_SYMBOL_GPL(snd_hdac_is_supported_format); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 2abf9f95dcbb..df3cebc06110 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3191,311 +3191,6 @@ int snd_hda_codec_build_controls(struct hda_codec *codec) return 0; } -/* - * stream formats - */ -struct hda_rate_tbl { - unsigned int hz; - unsigned int alsa_bits; - unsigned int hda_fmt; -}; - -/* rate = base * mult / div */ -#define HDA_RATE(base, mult, div) \ - (AC_FMT_BASE_##base##K | (((mult) - 1) << AC_FMT_MULT_SHIFT) | \ - (((div) - 1) << AC_FMT_DIV_SHIFT)) - -static struct hda_rate_tbl rate_bits[] = { - /* rate in Hz, ALSA rate bitmask, HDA format value */ - - /* autodetected value used in snd_hda_query_supported_pcm */ - { 8000, SNDRV_PCM_RATE_8000, HDA_RATE(48, 1, 6) }, - { 11025, SNDRV_PCM_RATE_11025, HDA_RATE(44, 1, 4) }, - { 16000, SNDRV_PCM_RATE_16000, HDA_RATE(48, 1, 3) }, - { 22050, SNDRV_PCM_RATE_22050, HDA_RATE(44, 1, 2) }, - { 32000, SNDRV_PCM_RATE_32000, HDA_RATE(48, 2, 3) }, - { 44100, SNDRV_PCM_RATE_44100, HDA_RATE(44, 1, 1) }, - { 48000, SNDRV_PCM_RATE_48000, HDA_RATE(48, 1, 1) }, - { 88200, SNDRV_PCM_RATE_88200, HDA_RATE(44, 2, 1) }, - { 96000, SNDRV_PCM_RATE_96000, HDA_RATE(48, 2, 1) }, - { 176400, SNDRV_PCM_RATE_176400, HDA_RATE(44, 4, 1) }, - { 192000, SNDRV_PCM_RATE_192000, HDA_RATE(48, 4, 1) }, -#define AC_PAR_PCM_RATE_BITS 11 - /* up to bits 10, 384kHZ isn't supported properly */ - - /* not autodetected value */ - { 9600, SNDRV_PCM_RATE_KNOT, HDA_RATE(48, 1, 5) }, - - { 0 } /* terminator */ -}; - -/** - * snd_hda_calc_stream_format - calculate format bitset - * @codec: HD-audio codec - * @rate: the sample rate - * @channels: the number of channels - * @format: the PCM format (SNDRV_PCM_FORMAT_XXX) - * @maxbps: the max. bps - * @spdif_ctls: HD-audio SPDIF status bits (0 if irrelevant) - * - * Calculate the format bitset from the given rate, channels and th PCM format. - * - * Return zero if invalid. - */ -unsigned int snd_hda_calc_stream_format(struct hda_codec *codec, - unsigned int rate, - unsigned int channels, - unsigned int format, - unsigned int maxbps, - unsigned short spdif_ctls) -{ - int i; - unsigned int val = 0; - - for (i = 0; rate_bits[i].hz; i++) - if (rate_bits[i].hz == rate) { - val = rate_bits[i].hda_fmt; - break; - } - if (!rate_bits[i].hz) { - codec_dbg(codec, "invalid rate %d\n", rate); - return 0; - } - - if (channels == 0 || channels > 8) { - codec_dbg(codec, "invalid channels %d\n", channels); - return 0; - } - val |= channels - 1; - - switch (snd_pcm_format_width(format)) { - case 8: - val |= AC_FMT_BITS_8; - break; - case 16: - val |= AC_FMT_BITS_16; - break; - case 20: - case 24: - case 32: - if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE) - val |= AC_FMT_BITS_32; - else if (maxbps >= 24) - val |= AC_FMT_BITS_24; - else - val |= AC_FMT_BITS_20; - break; - default: - codec_dbg(codec, "invalid format width %d\n", - snd_pcm_format_width(format)); - return 0; - } - - if (spdif_ctls & AC_DIG1_NONAUDIO) - val |= AC_FMT_TYPE_NON_PCM; - - return val; -} -EXPORT_SYMBOL_GPL(snd_hda_calc_stream_format); - -static unsigned int query_pcm_param(struct hda_codec *codec, hda_nid_t nid) -{ - unsigned int val = 0; - if (nid != codec->core.afg && - (get_wcaps(codec, nid) & AC_WCAP_FORMAT_OVRD)) - val = snd_hda_param_read(codec, nid, AC_PAR_PCM); - if (!val || val == -1) - val = snd_hda_param_read(codec, codec->core.afg, AC_PAR_PCM); - if (!val || val == -1) - return 0; - return val; -} - -static unsigned int query_stream_param(struct hda_codec *codec, hda_nid_t nid) -{ - unsigned int streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM); - if (!streams || streams == -1) - streams = snd_hda_param_read(codec, codec->core.afg, AC_PAR_STREAM); - if (!streams || streams == -1) - return 0; - return streams; -} - -/** - * snd_hda_query_supported_pcm - query the supported PCM rates and formats - * @codec: the HDA codec - * @nid: NID to query - * @ratesp: the pointer to store the detected rate bitflags - * @formatsp: the pointer to store the detected formats - * @bpsp: the pointer to store the detected format widths - * - * Queries the supported PCM rates and formats. The NULL @ratesp, @formatsp - * or @bsps argument is ignored. - * - * Returns 0 if successful, otherwise a negative error code. - */ -int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, - u32 *ratesp, u64 *formatsp, unsigned int *bpsp) -{ - unsigned int i, val, wcaps; - - wcaps = get_wcaps(codec, nid); - val = query_pcm_param(codec, nid); - - if (ratesp) { - u32 rates = 0; - for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) { - if (val & (1 << i)) - rates |= rate_bits[i].alsa_bits; - } - if (rates == 0) { - codec_err(codec, - "rates == 0 (nid=0x%x, val=0x%x, ovrd=%i)\n", - nid, val, - (wcaps & AC_WCAP_FORMAT_OVRD) ? 1 : 0); - return -EIO; - } - *ratesp = rates; - } - - if (formatsp || bpsp) { - u64 formats = 0; - unsigned int streams, bps; - - streams = query_stream_param(codec, nid); - if (!streams) - return -EIO; - - bps = 0; - if (streams & AC_SUPFMT_PCM) { - if (val & AC_SUPPCM_BITS_8) { - formats |= SNDRV_PCM_FMTBIT_U8; - bps = 8; - } - if (val & AC_SUPPCM_BITS_16) { - formats |= SNDRV_PCM_FMTBIT_S16_LE; - bps = 16; - } - if (wcaps & AC_WCAP_DIGITAL) { - if (val & AC_SUPPCM_BITS_32) - formats |= SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE; - if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24)) - formats |= SNDRV_PCM_FMTBIT_S32_LE; - if (val & AC_SUPPCM_BITS_24) - bps = 24; - else if (val & AC_SUPPCM_BITS_20) - bps = 20; - } else if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24| - AC_SUPPCM_BITS_32)) { - formats |= SNDRV_PCM_FMTBIT_S32_LE; - if (val & AC_SUPPCM_BITS_32) - bps = 32; - else if (val & AC_SUPPCM_BITS_24) - bps = 24; - else if (val & AC_SUPPCM_BITS_20) - bps = 20; - } - } -#if 0 /* FIXME: CS4206 doesn't work, which is the only codec supporting float */ - if (streams & AC_SUPFMT_FLOAT32) { - formats |= SNDRV_PCM_FMTBIT_FLOAT_LE; - if (!bps) - bps = 32; - } -#endif - if (streams == AC_SUPFMT_AC3) { - /* should be exclusive */ - /* temporary hack: we have still no proper support - * for the direct AC3 stream... - */ - formats |= SNDRV_PCM_FMTBIT_U8; - bps = 8; - } - if (formats == 0) { - codec_err(codec, - "formats == 0 (nid=0x%x, val=0x%x, ovrd=%i, streams=0x%x)\n", - nid, val, - (wcaps & AC_WCAP_FORMAT_OVRD) ? 1 : 0, - streams); - return -EIO; - } - if (formatsp) - *formatsp = formats; - if (bpsp) - *bpsp = bps; - } - - return 0; -} -EXPORT_SYMBOL_GPL(snd_hda_query_supported_pcm); - -/** - * snd_hda_is_supported_format - Check the validity of the format - * @codec: HD-audio codec - * @nid: NID to check - * @format: the HD-audio format value to check - * - * Check whether the given node supports the format value. - * - * Returns 1 if supported, 0 if not. - */ -int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, - unsigned int format) -{ - int i; - unsigned int val = 0, rate, stream; - - val = query_pcm_param(codec, nid); - if (!val) - return 0; - - rate = format & 0xff00; - for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) - if (rate_bits[i].hda_fmt == rate) { - if (val & (1 << i)) - break; - return 0; - } - if (i >= AC_PAR_PCM_RATE_BITS) - return 0; - - stream = query_stream_param(codec, nid); - if (!stream) - return 0; - - if (stream & AC_SUPFMT_PCM) { - switch (format & 0xf0) { - case 0x00: - if (!(val & AC_SUPPCM_BITS_8)) - return 0; - break; - case 0x10: - if (!(val & AC_SUPPCM_BITS_16)) - return 0; - break; - case 0x20: - if (!(val & AC_SUPPCM_BITS_20)) - return 0; - break; - case 0x30: - if (!(val & AC_SUPPCM_BITS_24)) - return 0; - break; - case 0x40: - if (!(val & AC_SUPPCM_BITS_32)) - return 0; - break; - default: - return 0; - } - } else { - /* FIXME: check for float32 and AC3? */ - } - - return 1; -} -EXPORT_SYMBOL_GPL(snd_hda_is_supported_format); - /* * PCM stuff */ diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 57b9aa0f36c1..1ffdd39cb556 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -365,8 +365,6 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux, hda_nid_t nid, int recursive); int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid, u8 *dev_list, int max_devices); -int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, - u32 *ratesp, u64 *formatsp, unsigned int *bpsp); struct hda_verb { hda_nid_t nid; @@ -458,14 +456,11 @@ void __snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid, int do_now); #define snd_hda_codec_cleanup_stream(codec, nid) \ __snd_hda_codec_cleanup_stream(codec, nid, 0) -unsigned int snd_hda_calc_stream_format(struct hda_codec *codec, - unsigned int rate, - unsigned int channels, - unsigned int format, - unsigned int maxbps, - unsigned short spdif_ctls); -int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, - unsigned int format); + +#define snd_hda_query_supported_pcm(codec, nid, ratesp, fmtsp, bpsp) \ + snd_hdac_query_supported_pcm(&(codec)->core, nid, ratesp, fmtsp, bpsp) +#define snd_hda_is_supported_format(codec, nid, fmt) \ + snd_hdac_is_supported_format(&(codec)->core, nid, fmt) extern const struct snd_pcm_chmap_elem snd_pcm_2_1_chmaps[]; diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index aaf01e841426..8f12ad9a4df5 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -167,8 +167,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) } snd_hdac_stream_reset(azx_stream(azx_dev)); - format_val = snd_hda_calc_stream_format(apcm->codec, - runtime->rate, + format_val = snd_hdac_calc_stream_format(runtime->rate, runtime->channels, runtime->format, hinfo->maxbps, diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 4a4e7b282e4f..2de1a4222a7d 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -2052,11 +2052,8 @@ static int dma_convert_to_hda_format(struct hda_codec *codec, { unsigned int format_val; - format_val = snd_hda_calc_stream_format(codec, - sample_rate, - channels, - SNDRV_PCM_FORMAT_S32_LE, - 32, 0); + format_val = snd_hdac_calc_stream_format(sample_rate, + channels, SNDRV_PCM_FORMAT_S32_LE, 32, 0); if (hda_format) *hda_format = (unsigned short)format_val; -- cgit v1.2.3 From 6d23c8f5440e33cb854e394d38b8c19315f21428 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 17 Apr 2015 13:34:30 +0200 Subject: ALSA: hda - Move prepared flag into struct hdac_stream This flag seems used commonly, so deserves to be located there. Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 1 + sound/pci/hda/hda_controller.c | 8 ++++---- sound/pci/hda/hda_controller.h | 1 - 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 15bc039de78d..dbeb195eb4e8 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -390,6 +390,7 @@ struct hdac_stream { bool opened:1; bool running:1; + bool prepared:1; bool no_period_wakeup:1; bool locked:1; diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 9bc8eaf0e5ac..14ffb6bd986c 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -145,7 +145,7 @@ static int azx_pcm_hw_free(struct snd_pcm_substream *substream) snd_hda_codec_cleanup(apcm->codec, hinfo, substream); err = chip->ops->substream_free_pages(chip, substream); - azx_dev->prepared = 0; + azx_stream(azx_dev)->prepared = 0; dsp_unlock(azx_dev); return err; } @@ -214,7 +214,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) unlock: if (!err) - azx_dev->prepared = 1; + azx_stream(azx_dev)->prepared = 1; dsp_unlock(azx_dev); return err; } @@ -240,7 +240,7 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) else sync_reg = AZX_REG_SSYNC; - if (dsp_is_locked(azx_dev) || !azx_dev->prepared) + if (dsp_is_locked(azx_dev) || !hstr->prepared) return -EPIPE; switch (cmd) { @@ -843,7 +843,7 @@ int snd_hda_codec_load_dsp_prepare(struct hda_codec *codec, unsigned int format, return err; } - azx_dev->prepared = 0; + hstr->prepared = 0; return err; } EXPORT_SYMBOL_GPL(snd_hda_codec_load_dsp_prepare); diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index 407cba6577b8..173bf7c85b6e 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -62,7 +62,6 @@ struct azx_dev { struct hdac_stream core; unsigned int irq_pending:1; - unsigned int prepared:1; /* * For VIA: * A flag to ensure DMA position is 0 -- cgit v1.2.3 From c1cc18b1ca01530a40ace0c9ec48124ff1340125 Mon Sep 17 00:00:00 2001 From: Ramesh Babu Date: Fri, 17 Apr 2015 17:58:57 +0530 Subject: ALSA: hda - add ASoC device type for hda core Add HDA_DEV_ASOC device/driver type to support ASoC HDA drivers. Signed-off-by: Ramesh Babu Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index dbeb195eb4e8..d05931fc6f28 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -90,6 +90,7 @@ struct hdac_device { enum { HDA_DEV_CORE, HDA_DEV_LEGACY, + HDA_DEV_ASOC, }; /* direction */ -- cgit v1.2.3 From 86f6501bf4c13e805e48497aaffab86ad7a98c44 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 17 Apr 2015 17:58:58 +0530 Subject: ALSA: hda - add generic functions to set hdac stream params This will be used by hda controller driver to setup stream params in prepare. This function will setup the bdl and periods. Signed-off-by: Jeeja KP Signed-off-by: Subhransu S. Prusty Signed-off-by: Vinod Koul Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 2 ++ sound/hda/hdac_stream.c | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index d05931fc6f28..6a2e030c836c 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -418,6 +418,8 @@ void snd_hdac_stream_release(struct hdac_stream *azx_dev); int snd_hdac_stream_setup(struct hdac_stream *azx_dev); void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev); int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev); +int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, + unsigned int format_val); void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start); void snd_hdac_stream_clear(struct hdac_stream *azx_dev); void snd_hdac_stream_stop(struct hdac_stream *azx_dev); diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index 9ffff6d9ba8e..1ba0462ef7ca 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -394,6 +394,44 @@ int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) } EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); +/* snd_hdac_stream_set_params - set stream parameters + * @azx_dev: HD-audio core stream for which parameters are to be set + * @format_val: format value parameter + * + * Setup the HD-audio core stream parameters from substream of the stream + * and passed format value + */ +int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, + unsigned int format_val) +{ + + unsigned int bufsize, period_bytes; + struct snd_pcm_substream *substream = azx_dev->substream; + struct snd_pcm_runtime *runtime; + int err; + + if (!substream) + return -EINVAL; + runtime = substream->runtime; + bufsize = snd_pcm_lib_buffer_bytes(substream); + period_bytes = snd_pcm_lib_period_bytes(substream); + + if (bufsize != azx_dev->bufsize || + period_bytes != azx_dev->period_bytes || + format_val != azx_dev->format_val || + runtime->no_period_wakeup != azx_dev->no_period_wakeup) { + azx_dev->bufsize = bufsize; + azx_dev->period_bytes = period_bytes; + azx_dev->format_val = format_val; + azx_dev->no_period_wakeup = runtime->no_period_wakeup; + err = snd_hdac_stream_setup_periods(azx_dev); + if (err < 0) + return err; + } + return 0; +} +EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); + static cycle_t azx_cc_read(const struct cyclecounter *cc) { struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); -- cgit v1.2.3 From 4adb7bcbcb69d3bee0ed72de83adaee27daccdd8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Apr 2015 16:10:22 +0200 Subject: ALSA: core: Use seq_file for text proc file reads seq_file is _the_ standard interface for simple text proc files. Though, we still need to support the binary proc files and the text file write, and also we need to manage the device disconnection gracefully. Thus this patch just replaces the text file read code with seq_file while keeping the rest intact. snd_iprintf() helper function is now a macro to expand itself to seq_printf() to be compatible with the existing code. The seq_file object is stored to the unused entry->rbuffer->buffer pointer. When the output size is expected to be large (greater than PAGE_SIZE), the driver should set entry->size field beforehand. Then the given size will be preallocated and the multiple show calls can be avoided. Acked-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/info.h | 16 +- sound/core/info.c | 569 ++++++++++++++++++++++----------------------------- 2 files changed, 261 insertions(+), 324 deletions(-) (limited to 'include') diff --git a/include/sound/info.h b/include/sound/info.h index 9ca1a493d370..ff8962ebece5 100644 --- a/include/sound/info.h +++ b/include/sound/info.h @@ -23,6 +23,7 @@ */ #include +#include /* buffer for information */ struct snd_info_buffer { @@ -110,8 +111,18 @@ void snd_card_info_read_oss(struct snd_info_buffer *buffer); static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {} #endif -__printf(2, 3) -int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...); +/** + * snd_iprintf - printf on the procfs buffer + * @buf: the procfs buffer + * @fmt: the printf format + * + * Outputs the string on the procfs buffer just like printf(). + * + * Return: zero for success, or a negative error code. + */ +#define snd_iprintf(buf, fmt, args...) \ + seq_printf((struct seq_file *)(buf)->buffer, fmt, ##args) + int snd_info_init(void); int snd_info_done(void); @@ -175,7 +186,6 @@ static inline int snd_card_proc_new(struct snd_card *card, const char *name, static inline void snd_info_set_text_ops(struct snd_info_entry *entry __attribute__((unused)), void *private_data, void (*read)(struct snd_info_entry *, struct snd_info_buffer *)) {} - static inline int snd_info_check_reserved_words(const char *str) { return 1; } #endif diff --git a/sound/core/info.c b/sound/core/info.c index 9f404e965ea2..8c1275f0fcbd 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -81,66 +81,6 @@ static int snd_info_version_init(void); static int snd_info_version_done(void); static void snd_info_disconnect(struct snd_info_entry *entry); - -/* resize the proc r/w buffer */ -static int resize_info_buffer(struct snd_info_buffer *buffer, - unsigned int nsize) -{ - char *nbuf; - - nsize = PAGE_ALIGN(nsize); - nbuf = krealloc(buffer->buffer, nsize, GFP_KERNEL | __GFP_ZERO); - if (! nbuf) - return -ENOMEM; - - buffer->buffer = nbuf; - buffer->len = nsize; - return 0; -} - -/** - * snd_iprintf - printf on the procfs buffer - * @buffer: the procfs buffer - * @fmt: the printf format - * - * Outputs the string on the procfs buffer just like printf(). - * - * Return: The size of output string, or a negative error code. - */ -int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...) -{ - va_list args; - int len, res; - int err = 0; - - might_sleep(); - if (buffer->stop || buffer->error) - return 0; - len = buffer->len - buffer->size; - va_start(args, fmt); - for (;;) { - va_list ap; - va_copy(ap, args); - res = vsnprintf(buffer->buffer + buffer->curr, len, fmt, ap); - va_end(ap); - if (res < len) - break; - err = resize_info_buffer(buffer, buffer->len + PAGE_SIZE); - if (err < 0) - break; - len = buffer->len - buffer->size; - } - va_end(args); - - if (err < 0) - return err; - buffer->curr += res; - buffer->size += res; - return res; -} - -EXPORT_SYMBOL(snd_iprintf); - /* */ @@ -153,6 +93,37 @@ EXPORT_SYMBOL(snd_seq_root); struct snd_info_entry *snd_oss_root; #endif +static int alloc_info_private(struct snd_info_entry *entry, + struct snd_info_private_data **ret) +{ + struct snd_info_private_data *data; + + if (!entry || !entry->p) + return -ENODEV; + if (!try_module_get(entry->module)) + return -EFAULT; + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + module_put(entry->module); + return -ENOMEM; + } + data->entry = entry; + *ret = data; + return 0; +} + +static bool valid_pos(loff_t pos, size_t count) +{ + if (pos < 0 || (long) pos != pos || (ssize_t) count < 0) + return false; + if ((unsigned long) pos + (unsigned long) count < (unsigned long) pos) + return false; + return true; +} + +/* + * file ops for binary proc files + */ static loff_t snd_info_entry_llseek(struct file *file, loff_t offset, int orig) { struct snd_info_private_data *data; @@ -162,17 +133,14 @@ static loff_t snd_info_entry_llseek(struct file *file, loff_t offset, int orig) data = file->private_data; entry = data->entry; mutex_lock(&entry->access); - if (entry->content == SNDRV_INFO_CONTENT_DATA && - entry->c.ops->llseek) { + if (entry->c.ops->llseek) { offset = entry->c.ops->llseek(entry, data->file_private_data, file, offset, orig); goto out; } - if (entry->content == SNDRV_INFO_CONTENT_DATA) - size = entry->size; - else - size = 0; + + size = entry->size; switch (orig) { case SEEK_SET: break; @@ -201,45 +169,20 @@ static loff_t snd_info_entry_llseek(struct file *file, loff_t offset, int orig) static ssize_t snd_info_entry_read(struct file *file, char __user *buffer, size_t count, loff_t * offset) { - struct snd_info_private_data *data; - struct snd_info_entry *entry; - struct snd_info_buffer *buf; - size_t size = 0; + struct snd_info_private_data *data = file->private_data; + struct snd_info_entry *entry = data->entry; + size_t size; loff_t pos; - data = file->private_data; - if (snd_BUG_ON(!data)) - return -ENXIO; pos = *offset; - if (pos < 0 || (long) pos != pos || (ssize_t) count < 0) - return -EIO; - if ((unsigned long) pos + (unsigned long) count < (unsigned long) pos) + if (!valid_pos(pos, count)) return -EIO; - entry = data->entry; - switch (entry->content) { - case SNDRV_INFO_CONTENT_TEXT: - buf = data->rbuffer; - if (buf == NULL) - return -EIO; - if (pos >= buf->size) - return 0; - size = buf->size - pos; - size = min(count, size); - if (copy_to_user(buffer, buf->buffer + pos, size)) - return -EFAULT; - break; - case SNDRV_INFO_CONTENT_DATA: - if (pos >= entry->size) - return 0; - if (entry->c.ops->read) { - size = entry->size - pos; - size = min(count, size); - size = entry->c.ops->read(entry, - data->file_private_data, - file, buffer, size, pos); - } - break; - } + if (pos >= entry->size) + return 0; + size = entry->size - pos; + size = min(count, size); + size = entry->c.ops->read(entry, data->file_private_data, + file, buffer, size, pos); if ((ssize_t) size > 0) *offset = pos + size; return size; @@ -248,280 +191,259 @@ static ssize_t snd_info_entry_read(struct file *file, char __user *buffer, static ssize_t snd_info_entry_write(struct file *file, const char __user *buffer, size_t count, loff_t * offset) { - struct snd_info_private_data *data; - struct snd_info_entry *entry; - struct snd_info_buffer *buf; + struct snd_info_private_data *data = file->private_data; + struct snd_info_entry *entry = data->entry; ssize_t size = 0; loff_t pos; - data = file->private_data; - if (snd_BUG_ON(!data)) - return -ENXIO; - entry = data->entry; pos = *offset; - if (pos < 0 || (long) pos != pos || (ssize_t) count < 0) + if (!valid_pos(pos, count)) return -EIO; - if ((unsigned long) pos + (unsigned long) count < (unsigned long) pos) - return -EIO; - switch (entry->content) { - case SNDRV_INFO_CONTENT_TEXT: - buf = data->wbuffer; - if (buf == NULL) - return -EIO; - mutex_lock(&entry->access); - if (pos + count >= buf->len) { - if (resize_info_buffer(buf, pos + count)) { - mutex_unlock(&entry->access); - return -ENOMEM; - } - } - if (copy_from_user(buf->buffer + pos, buffer, count)) { - mutex_unlock(&entry->access); - return -EFAULT; - } - buf->size = pos + count; - mutex_unlock(&entry->access); - size = count; - break; - case SNDRV_INFO_CONTENT_DATA: - if (entry->c.ops->write && count > 0) { - size_t maxsize = entry->size - pos; - count = min(count, maxsize); - size = entry->c.ops->write(entry, - data->file_private_data, - file, buffer, count, pos); - } - break; + if (count > 0) { + size_t maxsize = entry->size - pos; + count = min(count, maxsize); + size = entry->c.ops->write(entry, data->file_private_data, + file, buffer, count, pos); } - if ((ssize_t) size > 0) + if (size > 0) *offset = pos + size; return size; } -static int snd_info_entry_open(struct inode *inode, struct file *file) +static unsigned int snd_info_entry_poll(struct file *file, poll_table *wait) +{ + struct snd_info_private_data *data = file->private_data; + struct snd_info_entry *entry = data->entry; + unsigned int mask = 0; + + if (entry->c.ops->poll) + return entry->c.ops->poll(entry, + data->file_private_data, + file, wait); + if (entry->c.ops->read) + mask |= POLLIN | POLLRDNORM; + if (entry->c.ops->write) + mask |= POLLOUT | POLLWRNORM; + return mask; +} + +static long snd_info_entry_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct snd_info_private_data *data = file->private_data; + struct snd_info_entry *entry = data->entry; + + if (!entry->c.ops->ioctl) + return -ENOTTY; + return entry->c.ops->ioctl(entry, data->file_private_data, + file, cmd, arg); +} + +static int snd_info_entry_mmap(struct file *file, struct vm_area_struct *vma) { + struct inode *inode = file_inode(file); + struct snd_info_private_data *data; struct snd_info_entry *entry; + + data = file->private_data; + if (data == NULL) + return 0; + entry = data->entry; + if (!entry->c.ops->mmap) + return -ENXIO; + return entry->c.ops->mmap(entry, data->file_private_data, + inode, file, vma); +} + +static int snd_info_entry_open(struct inode *inode, struct file *file) +{ + struct snd_info_entry *entry = PDE_DATA(inode); struct snd_info_private_data *data; - struct snd_info_buffer *buffer; int mode, err; mutex_lock(&info_mutex); - entry = PDE_DATA(inode); - if (entry == NULL || ! entry->p) { - mutex_unlock(&info_mutex); - return -ENODEV; - } - if (!try_module_get(entry->module)) { - err = -EFAULT; - goto __error1; - } + err = alloc_info_private(entry, &data); + if (err < 0) + goto unlock; + mode = file->f_flags & O_ACCMODE; - if (mode == O_RDONLY || mode == O_RDWR) { - if ((entry->content == SNDRV_INFO_CONTENT_DATA && - entry->c.ops->read == NULL)) { - err = -ENODEV; - goto __error; - } - } - if (mode == O_WRONLY || mode == O_RDWR) { - if ((entry->content == SNDRV_INFO_CONTENT_DATA && - entry->c.ops->write == NULL)) { - err = -ENODEV; - goto __error; - } + if (((mode == O_RDONLY || mode == O_RDWR) && !entry->c.ops->read) || + ((mode == O_WRONLY || mode == O_RDWR) && !entry->c.ops->write)) { + err = -ENODEV; + goto error; } - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (data == NULL) { - err = -ENOMEM; - goto __error; - } - data->entry = entry; - switch (entry->content) { - case SNDRV_INFO_CONTENT_TEXT: - if (mode == O_RDONLY || mode == O_RDWR) { - buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); - if (buffer == NULL) - goto __nomem; - data->rbuffer = buffer; - buffer->len = PAGE_SIZE; - buffer->buffer = kzalloc(buffer->len, GFP_KERNEL); - if (buffer->buffer == NULL) - goto __nomem; - } - if (mode == O_WRONLY || mode == O_RDWR) { - buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); - if (buffer == NULL) - goto __nomem; - data->wbuffer = buffer; - buffer->len = PAGE_SIZE; - buffer->buffer = kmalloc(buffer->len, GFP_KERNEL); - if (buffer->buffer == NULL) - goto __nomem; - } - break; - case SNDRV_INFO_CONTENT_DATA: /* data */ - if (entry->c.ops->open) { - if ((err = entry->c.ops->open(entry, mode, - &data->file_private_data)) < 0) { - kfree(data); - goto __error; - } - } - break; + + if (entry->c.ops->open) { + err = entry->c.ops->open(entry, mode, &data->file_private_data); + if (err < 0) + goto error; } + file->private_data = data; mutex_unlock(&info_mutex); - if (entry->content == SNDRV_INFO_CONTENT_TEXT && - (mode == O_RDONLY || mode == O_RDWR)) { - if (entry->c.text.read) { - mutex_lock(&entry->access); - entry->c.text.read(entry, data->rbuffer); - mutex_unlock(&entry->access); - } - } return 0; - __nomem: - if (data->rbuffer) { - kfree(data->rbuffer->buffer); - kfree(data->rbuffer); - } - if (data->wbuffer) { - kfree(data->wbuffer->buffer); - kfree(data->wbuffer); - } + error: kfree(data); - err = -ENOMEM; - __error: module_put(entry->module); - __error1: + unlock: mutex_unlock(&info_mutex); return err; } static int snd_info_entry_release(struct inode *inode, struct file *file) { - struct snd_info_entry *entry; - struct snd_info_private_data *data; - int mode; + struct snd_info_private_data *data = file->private_data; + struct snd_info_entry *entry = data->entry; - mode = file->f_flags & O_ACCMODE; - data = file->private_data; - entry = data->entry; - switch (entry->content) { - case SNDRV_INFO_CONTENT_TEXT: - if (data->rbuffer) { - kfree(data->rbuffer->buffer); - kfree(data->rbuffer); - } - if (data->wbuffer) { - if (entry->c.text.write) { - entry->c.text.write(entry, data->wbuffer); - if (data->wbuffer->error) { - if (entry->card) - dev_warn(entry->card->dev, "info: data write error to %s (%i)\n", - entry->name, - data->wbuffer->error); - else - pr_warn("ALSA: info: data write error to %s (%i)\n", - entry->name, - data->wbuffer->error); - } - } - kfree(data->wbuffer->buffer); - kfree(data->wbuffer); - } - break; - case SNDRV_INFO_CONTENT_DATA: - if (entry->c.ops->release) - entry->c.ops->release(entry, mode, - data->file_private_data); - break; - } + if (entry->c.ops->release) + entry->c.ops->release(entry, file->f_flags & O_ACCMODE, + data->file_private_data); module_put(entry->module); kfree(data); return 0; } -static unsigned int snd_info_entry_poll(struct file *file, poll_table * wait) +static const struct file_operations snd_info_entry_operations = { - struct snd_info_private_data *data; - struct snd_info_entry *entry; - unsigned int mask; + .owner = THIS_MODULE, + .llseek = snd_info_entry_llseek, + .read = snd_info_entry_read, + .write = snd_info_entry_write, + .poll = snd_info_entry_poll, + .unlocked_ioctl = snd_info_entry_ioctl, + .mmap = snd_info_entry_mmap, + .open = snd_info_entry_open, + .release = snd_info_entry_release, +}; - data = file->private_data; - if (data == NULL) - return 0; - entry = data->entry; - mask = 0; - switch (entry->content) { - case SNDRV_INFO_CONTENT_DATA: - if (entry->c.ops->poll) - return entry->c.ops->poll(entry, - data->file_private_data, - file, wait); - if (entry->c.ops->read) - mask |= POLLIN | POLLRDNORM; - if (entry->c.ops->write) - mask |= POLLOUT | POLLWRNORM; - break; +/* + * file ops for text proc files + */ +static ssize_t snd_info_text_entry_write(struct file *file, + const char __user *buffer, + size_t count, loff_t *offset) +{ + struct seq_file *m = file->private_data; + struct snd_info_private_data *data = m->private; + struct snd_info_entry *entry = data->entry; + struct snd_info_buffer *buf; + loff_t pos; + size_t next; + int err = 0; + + pos = *offset; + if (!valid_pos(pos, count)) + return -EIO; + next = pos + count; + mutex_lock(&entry->access); + buf = data->wbuffer; + if (!buf) { + data->wbuffer = buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto error; + } } - return mask; + if (next > buf->len) { + char *nbuf = krealloc(buf->buffer, PAGE_ALIGN(next), + GFP_KERNEL | __GFP_ZERO); + if (!nbuf) { + err = -ENOMEM; + goto error; + } + buf->buffer = nbuf; + buf->len = PAGE_ALIGN(next); + } + if (copy_from_user(buf->buffer + pos, buffer, count)) { + err = -EFAULT; + goto error; + } + buf->size = next; + error: + mutex_unlock(&entry->access); + if (err < 0) + return err; + *offset = next; + return count; } -static long snd_info_entry_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) +static int snd_info_seq_show(struct seq_file *seq, void *p) { - struct snd_info_private_data *data; - struct snd_info_entry *entry; + struct snd_info_private_data *data = seq->private; + struct snd_info_entry *entry = data->entry; - data = file->private_data; - if (data == NULL) - return 0; - entry = data->entry; - switch (entry->content) { - case SNDRV_INFO_CONTENT_DATA: - if (entry->c.ops->ioctl) - return entry->c.ops->ioctl(entry, - data->file_private_data, - file, cmd, arg); - break; + if (entry->c.text.read) { + data->rbuffer->buffer = (char *)seq; /* XXX hack! */ + entry->c.text.read(entry, data->rbuffer); } - return -ENOTTY; + return 0; } -static int snd_info_entry_mmap(struct file *file, struct vm_area_struct *vma) +static int snd_info_text_entry_open(struct inode *inode, struct file *file) { - struct inode *inode = file_inode(file); + struct snd_info_entry *entry = PDE_DATA(inode); struct snd_info_private_data *data; - struct snd_info_entry *entry; + int err; - data = file->private_data; - if (data == NULL) - return 0; - entry = data->entry; - switch (entry->content) { - case SNDRV_INFO_CONTENT_DATA: - if (entry->c.ops->mmap) - return entry->c.ops->mmap(entry, - data->file_private_data, - inode, file, vma); - break; + mutex_lock(&info_mutex); + err = alloc_info_private(entry, &data); + if (err < 0) + goto unlock; + + data->rbuffer = kzalloc(sizeof(*data->rbuffer), GFP_KERNEL); + if (!data->rbuffer) { + err = -ENOMEM; + goto error; + } + if (entry->size) + err = single_open_size(file, snd_info_seq_show, data, + entry->size); + else + err = single_open(file, snd_info_seq_show, data); + if (err < 0) + goto error; + mutex_unlock(&info_mutex); + return 0; + + error: + kfree(data->rbuffer); + kfree(data); + module_put(entry->module); + unlock: + mutex_unlock(&info_mutex); + return err; +} + +static int snd_info_text_entry_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + struct snd_info_private_data *data = m->private; + struct snd_info_entry *entry = data->entry; + + if (data->wbuffer && entry->c.text.write) + entry->c.text.write(entry, data->wbuffer); + + single_release(inode, file); + kfree(data->rbuffer); + if (data->wbuffer) { + kfree(data->wbuffer->buffer); + kfree(data->wbuffer); } - return -ENXIO; + + module_put(entry->module); + kfree(data); + return 0; } -static const struct file_operations snd_info_entry_operations = +static const struct file_operations snd_info_text_entry_ops = { .owner = THIS_MODULE, - .llseek = snd_info_entry_llseek, - .read = snd_info_entry_read, - .write = snd_info_entry_write, - .poll = snd_info_entry_poll, - .unlocked_ioctl = snd_info_entry_ioctl, - .mmap = snd_info_entry_mmap, - .open = snd_info_entry_open, - .release = snd_info_entry_release, + .open = snd_info_text_entry_open, + .release = snd_info_text_entry_release, + .write = snd_info_text_entry_write, + .llseek = seq_lseek, + .read = seq_read, }; int __init snd_info_init(void) @@ -955,8 +877,13 @@ int snd_info_register(struct snd_info_entry * entry) return -ENOMEM; } } else { + const struct file_operations *ops; + if (entry->content == SNDRV_INFO_CONTENT_DATA) + ops = &snd_info_entry_operations; + else + ops = &snd_info_text_entry_ops; p = proc_create_data(entry->name, entry->mode, root, - &snd_info_entry_operations, entry); + ops, entry); if (!p) { mutex_unlock(&info_mutex); return -ENOMEM; -- cgit v1.2.3 From c560a6797e3bec1e04f1f6f9f3c2135db0f5c8ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Apr 2015 18:26:38 +0200 Subject: ALSA: core: Remove child proc file elements recursively This patch changes the way to manage the resource release of proc files: namely, let snd_info_free_entry() freeing the whole children. This makes it us possible to drop the snd_device_*() management. Then snd_card_proc_new() becomes merely a wrapper to snd_info_create_card_entry(). Together with this change, now you need to call snd_info_free_entry() for a proc entry created via snd_card_proc_new(), while it was freed via snd_device_free() beforehand. Acked-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/info.h | 9 ++++-- sound/core/info.c | 79 ++++++++-------------------------------------- sound/pci/hda/patch_hdmi.c | 2 +- 3 files changed, 21 insertions(+), 69 deletions(-) (limited to 'include') diff --git a/include/sound/info.h b/include/sound/info.h index ff8962ebece5..3e2fda3c75ee 100644 --- a/include/sound/info.h +++ b/include/sound/info.h @@ -24,6 +24,7 @@ #include #include +#include /* buffer for information */ struct snd_info_buffer { @@ -146,8 +147,12 @@ void snd_info_card_id_change(struct snd_card *card); int snd_info_register(struct snd_info_entry *entry); /* for card drivers */ -int snd_card_proc_new(struct snd_card *card, const char *name, - struct snd_info_entry **entryp); +static inline int snd_card_proc_new(struct snd_card *card, const char *name, + struct snd_info_entry **entryp) +{ + *entryp = snd_info_create_card_entry(card, name, card->proc_root); + return *entryp ? 0 : -ENOMEM; +} static inline void snd_info_set_text_ops(struct snd_info_entry *entry, void *private_data, diff --git a/sound/core/info.c b/sound/core/info.c index 9c6db5c24da7..96451a130199 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -760,92 +760,39 @@ EXPORT_SYMBOL(snd_info_create_card_entry); static void snd_info_disconnect(struct snd_info_entry *entry) { - struct list_head *p, *n; + struct snd_info_entry *p, *n; - list_for_each_safe(p, n, &entry->children) { - snd_info_disconnect(list_entry(p, struct snd_info_entry, list)); - } - - if (! entry->p) + if (!entry->p) return; + list_for_each_entry_safe(p, n, &entry->children, list) + snd_info_disconnect(p); list_del_init(&entry->list); proc_remove(entry->p); entry->p = NULL; } -static int snd_info_dev_free_entry(struct snd_device *device) -{ - struct snd_info_entry *entry = device->device_data; - snd_info_free_entry(entry); - return 0; -} - -static int snd_info_dev_register_entry(struct snd_device *device) -{ - struct snd_info_entry *entry = device->device_data; - return snd_info_register(entry); -} - -/** - * snd_card_proc_new - create an info entry for the given card - * @card: the card instance - * @name: the file name - * @entryp: the pointer to store the new info entry - * - * Creates a new info entry and assigns it to the given card. - * Unlike snd_info_create_card_entry(), this function registers the - * info entry as an ALSA device component, so that it can be - * unregistered/released without explicit call. - * Also, you don't have to register this entry via snd_info_register(), - * since this will be registered by snd_card_register() automatically. - * - * The parent is assumed as card->proc_root. - * - * For releasing this entry, use snd_device_free() instead of - * snd_info_free_entry(). - * - * Return: Zero if successful, or a negative error code on failure. - */ -int snd_card_proc_new(struct snd_card *card, const char *name, - struct snd_info_entry **entryp) -{ - static struct snd_device_ops ops = { - .dev_free = snd_info_dev_free_entry, - .dev_register = snd_info_dev_register_entry, - /* disconnect is done via snd_info_card_disconnect() */ - }; - struct snd_info_entry *entry; - int err; - - entry = snd_info_create_card_entry(card, name, card->proc_root); - if (! entry) - return -ENOMEM; - if ((err = snd_device_new(card, SNDRV_DEV_INFO, entry, &ops)) < 0) { - snd_info_free_entry(entry); - return err; - } - if (entryp) - *entryp = entry; - return 0; -} - -EXPORT_SYMBOL(snd_card_proc_new); - /** * snd_info_free_entry - release the info entry * @entry: the info entry * - * Releases the info entry. Don't call this after registered. + * Releases the info entry. */ void snd_info_free_entry(struct snd_info_entry * entry) { - if (entry == NULL) + struct snd_info_entry *p, *n; + + if (!entry) return; if (entry->p) { mutex_lock(&info_mutex); snd_info_disconnect(entry); mutex_unlock(&info_mutex); } + + /* free all children at first */ + list_for_each_entry_safe(p, n, &entry->children, list) + snd_info_free_entry(p); + kfree(entry->name); if (entry->private_free) entry->private_free(entry); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5f44f60a6389..6e7e0b85c3e3 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -592,7 +592,7 @@ static int eld_proc_new(struct hdmi_spec_per_pin *per_pin, int index) static void eld_proc_free(struct hdmi_spec_per_pin *per_pin) { if (!per_pin->codec->bus->shutdown && per_pin->proc_entry) { - snd_device_free(per_pin->codec->card, per_pin->proc_entry); + snd_info_free_entry(per_pin->proc_entry); per_pin->proc_entry = NULL; } } -- cgit v1.2.3 From b046d244e2290e3d114af2e91503ee3d08fc605a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 22 Apr 2015 21:33:41 +0200 Subject: ALSA: core: Remove superfluous exit calls for proc entries Since each proc entry is freed automatically by the parent, we don't have to take care of its life cycle any longer. This allows us to reduce a few more lines of codes. Acked-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/core.h | 4 ---- sound/core/info.c | 3 --- sound/core/init.c | 17 ----------------- sound/core/sound.c | 10 ---------- sound/core/sound_oss.c | 14 +------------- 5 files changed, 1 insertion(+), 47 deletions(-) (limited to 'include') diff --git a/include/sound/core.h b/include/sound/core.h index b12931f513f4..cdfecafff0f4 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -224,16 +224,13 @@ void *snd_lookup_oss_minor_data(unsigned int minor, int type); #endif int snd_minor_info_init(void); -int snd_minor_info_done(void); /* sound_oss.c */ #ifdef CONFIG_SND_OSSEMUL int snd_minor_info_oss_init(void); -int snd_minor_info_oss_done(void); #else static inline int snd_minor_info_oss_init(void) { return 0; } -static inline int snd_minor_info_oss_done(void) { return 0; } #endif /* memory.c */ @@ -262,7 +259,6 @@ int snd_card_free_when_closed(struct snd_card *card); void snd_card_set_id(struct snd_card *card, const char *id); int snd_card_register(struct snd_card *card); int snd_card_info_init(void); -int snd_card_info_done(void); int snd_card_add_dev_attr(struct snd_card *card, const struct attribute_group *group); int snd_component_add(struct snd_card *card, const char *component); diff --git a/sound/core/info.c b/sound/core/info.c index 55c626eeb061..339f90a3aa29 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -495,9 +495,6 @@ int __init snd_info_init(void) int __exit snd_info_done(void) { - snd_card_info_done(); - snd_minor_info_oss_done(); - snd_minor_info_done(); snd_info_free_entry(snd_proc_root); return 0; } diff --git a/sound/core/init.c b/sound/core/init.c index 04734e047bfe..0af34fac0499 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -783,8 +783,6 @@ int snd_card_register(struct snd_card *card) EXPORT_SYMBOL(snd_card_register); #ifdef CONFIG_PROC_FS -static struct snd_info_entry *snd_card_info_entry; - static void snd_card_info_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) { @@ -810,7 +808,6 @@ static void snd_card_info_read(struct snd_info_entry *entry, } #ifdef CONFIG_SND_OSSEMUL - void snd_card_info_read_oss(struct snd_info_buffer *buffer) { int idx, count; @@ -832,7 +829,6 @@ void snd_card_info_read_oss(struct snd_info_buffer *buffer) #endif #ifdef MODULE -static struct snd_info_entry *snd_card_module_info_entry; static void snd_card_module_info_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer) { @@ -861,7 +857,6 @@ int __init snd_card_info_init(void) snd_info_free_entry(entry); return -ENOMEM; } - snd_card_info_entry = entry; #ifdef MODULE entry = snd_info_create_module_entry(THIS_MODULE, "modules", NULL); @@ -869,23 +864,11 @@ int __init snd_card_info_init(void) entry->c.text.read = snd_card_module_info_read; if (snd_info_register(entry) < 0) snd_info_free_entry(entry); - else - snd_card_module_info_entry = entry; } #endif return 0; } - -int __exit snd_card_info_done(void) -{ - snd_info_free_entry(snd_card_info_entry); -#ifdef MODULE - snd_info_free_entry(snd_card_module_info_entry); -#endif - return 0; -} - #endif /* CONFIG_PROC_FS */ /** diff --git a/sound/core/sound.c b/sound/core/sound.c index 5fc93d00572a..d584944c8fe5 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -334,9 +334,6 @@ EXPORT_SYMBOL(snd_unregister_device); /* * INFO PART */ - -static struct snd_info_entry *snd_minor_info_entry; - static const char *snd_device_type_name(int type) { switch (type) { @@ -396,13 +393,6 @@ int __init snd_minor_info_init(void) entry = NULL; } } - snd_minor_info_entry = entry; - return 0; -} - -int __exit snd_minor_info_done(void) -{ - snd_info_free_entry(snd_minor_info_entry); return 0; } #endif /* CONFIG_PROC_FS */ diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index 573a65eb2b79..5fc3c6534225 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -214,9 +214,6 @@ EXPORT_SYMBOL(snd_unregister_oss_device); */ #ifdef CONFIG_PROC_FS - -static struct snd_info_entry *snd_minor_info_oss_entry; - static const char *snd_oss_device_type_name(int type) { switch (type) { @@ -265,18 +262,9 @@ int __init snd_minor_info_oss_init(void) entry = snd_info_create_module_entry(THIS_MODULE, "devices", snd_oss_root); if (entry) { entry->c.text.read = snd_minor_info_oss_read; - if (snd_info_register(entry) < 0) { + if (snd_info_register(entry) < 0) snd_info_free_entry(entry); - entry = NULL; - } } - snd_minor_info_oss_entry = entry; - return 0; -} - -int __exit snd_minor_info_oss_done(void) -{ - snd_info_free_entry(snd_minor_info_oss_entry); return 0; } #endif /* CONFIG_PROC_FS */ -- cgit v1.2.3 From a0dca822e923e605dbdc2f6ed4fcd96b74df9258 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 23 Apr 2015 10:56:21 +0200 Subject: ALSA: core: Clean up OSS proc file management A few minor cleanups: - Move the call of snd_info_minor_register() into snd_info_init() so that we can call all proc-related stuff in a shot - Add missing __init prefix to snd_info_minor_register() - Return an error properly from snd_oss_info_register() - Drop snd_info_minor_unregister() that is superfluous now Acked-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/info.h | 4 +--- sound/core/info.c | 3 ++- sound/core/info_oss.c | 25 +++++++------------------ sound/core/sound.c | 2 -- 4 files changed, 10 insertions(+), 24 deletions(-) (limited to 'include') diff --git a/include/sound/info.h b/include/sound/info.h index 3e2fda3c75ee..16269951bafc 100644 --- a/include/sound/info.h +++ b/include/sound/info.h @@ -94,10 +94,8 @@ struct snd_info_entry { #if defined(CONFIG_SND_OSSEMUL) && defined(CONFIG_PROC_FS) int snd_info_minor_register(void); -int snd_info_minor_unregister(void); #else -#define snd_info_minor_register() /* NOP */ -#define snd_info_minor_unregister() /* NOP */ +#define snd_info_minor_register() 0 #endif diff --git a/sound/core/info.c b/sound/core/info.c index f8bdd9b6f322..c8a413d6cc9b 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -479,7 +479,8 @@ int __init snd_info_init(void) if (snd_info_version_init() < 0 || snd_minor_info_init() < 0 || snd_minor_info_oss_init() < 0 || - snd_card_info_init() < 0) + snd_card_info_init() < 0 || + snd_info_minor_register() < 0) goto error; return 0; diff --git a/sound/core/info_oss.c b/sound/core/info_oss.c index bd4d2c6233c2..1478c8dfd473 100644 --- a/sound/core/info_oss.c +++ b/sound/core/info_oss.c @@ -35,7 +35,6 @@ static DEFINE_MUTEX(strings); static char *snd_sndstat_strings[SNDRV_CARDS][SNDRV_OSS_INFO_DEV_COUNT]; -static struct snd_info_entry *snd_sndstat_proc_entry; int snd_oss_info_register(int dev, int num, char *string) { @@ -110,25 +109,15 @@ static void snd_sndstat_proc_read(struct snd_info_entry *entry, snd_sndstat_show_strings(buffer, "Mixers", SNDRV_OSS_INFO_DEV_MIXERS); } -int snd_info_minor_register(void) +int __init snd_info_minor_register(void) { struct snd_info_entry *entry; memset(snd_sndstat_strings, 0, sizeof(snd_sndstat_strings)); - if ((entry = snd_info_create_module_entry(THIS_MODULE, "sndstat", snd_oss_root)) != NULL) { - entry->c.text.read = snd_sndstat_proc_read; - if (snd_info_register(entry) < 0) { - snd_info_free_entry(entry); - entry = NULL; - } - } - snd_sndstat_proc_entry = entry; - return 0; -} - -int snd_info_minor_unregister(void) -{ - snd_info_free_entry(snd_sndstat_proc_entry); - snd_sndstat_proc_entry = NULL; - return 0; + entry = snd_info_create_module_entry(THIS_MODULE, "sndstat", + snd_oss_root); + if (!entry) + return -ENOMEM; + entry->c.text.read = snd_sndstat_proc_read; + return snd_info_register(entry); /* freed in error path */ } diff --git a/sound/core/sound.c b/sound/core/sound.c index 8fc402e4ff35..e5d37bd7c226 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -409,7 +409,6 @@ static int __init alsa_sound_init(void) unregister_chrdev(major, "alsa"); return -ENOMEM; } - snd_info_minor_register(); #ifndef MODULE pr_info("Advanced Linux Sound Architecture Driver Initialized.\n"); #endif @@ -418,7 +417,6 @@ static int __init alsa_sound_init(void) static void __exit alsa_sound_exit(void) { - snd_info_minor_unregister(); snd_info_done(); unregister_chrdev(major, "alsa"); } -- cgit v1.2.3 From d16efa0626bfd11157d4a622a24aaae98435f26d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 27 Apr 2015 12:20:28 +0200 Subject: ALSA: Close holes in struct snd_pcm_hw_rule On a 64-bit system there are two 32-bit holes due to the alignment of 64-bit fields. Reordering things slightly gets rid of those holes, reducing the size of the struct by 17% percent of its original size. Signed-off-by: Lars-Peter Clausen Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 0cb7f3f5df7b..d632809d9425 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -224,9 +224,10 @@ typedef int (*snd_pcm_hw_rule_func_t)(struct snd_pcm_hw_params *params, struct snd_pcm_hw_rule { unsigned int cond; - snd_pcm_hw_rule_func_t func; int var; int deps[4]; + + snd_pcm_hw_rule_func_t func; void *private; }; -- cgit v1.2.3 From 782e50e0b38ff284dead13265f1c3e04004e507d Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 27 Apr 2015 12:20:29 +0200 Subject: ALSA: Close holes in struct snd_pcm_constraint_list On a 64-bit system there is a 32-bit hole in struct snd_pcm_constraint_list and then 32-bit padding at the end. Reordering things slightly gets rid of the hole and padding, reducing the size of the struct by 50% from its original size. Signed-off-by: Lars-Peter Clausen Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index d632809d9425..691e7ee0a510 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -274,8 +274,8 @@ struct snd_pcm_hw_constraint_ratdens { }; struct snd_pcm_hw_constraint_list { - unsigned int count; const unsigned int *list; + unsigned int count; unsigned int mask; }; -- cgit v1.2.3 From acde50a7bf1fd6ae0baa4402f0a02c4b1bd4c990 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 27 Apr 2015 12:44:25 +0200 Subject: ASoC: dmaengine_pcm: Make FLAG_NO_RESIDUE internal Whether residue can be reported or not is not a property of the audio controller but of the DMA controller. The FLAG_NO_RESIDUE was initially added when the DMAengine framework had no support for describing the residue reporting capabilities of the controller. Support for this was added quite a while ago and recently the DMAengine framework started to complain if a driver does not describe its capabilities and a lot of patches have been merged that add support for this where it was missing. So it should be safe to assume that driver on actively used platforms properly implement the DMA capabilities API. This patch makes the FLAG_NO_RESIDUE internal and no longer allows audio controller drivers to manually set the flag. If a DMA driver against expectations does not support reporting its capabilities for now the generic DMAengine PCM driver will now emit a warning and simply assume that residue reporting is not supported. In the future this might be changed to aborting with an error. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/dmaengine_pcm.h | 5 ----- sound/soc/atmel/atmel-pcm-dma.c | 3 +-- sound/soc/cirrus/ep93xx-pcm.c | 1 - sound/soc/fsl/fsl_sai.c | 3 +-- sound/soc/soc-generic-dmaengine-pcm.c | 25 ++++++++++++++----------- sound/soc/ux500/ux500_pcm.c | 1 - 6 files changed, 16 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index eb73a3a39ec2..f86ef5ea9b01 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -90,11 +90,6 @@ void snd_dmaengine_pcm_set_config_from_dai_data( * makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well. */ #define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1) -/* - * The platforms dmaengine driver does not support reporting the amount of - * bytes that are still left to transfer. - */ -#define SND_DMAENGINE_PCM_FLAG_NO_RESIDUE BIT(2) /* * The PCM is half duplex and the DMA channel is shared between capture and * playback. diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c index b6625c8c411b..dd57a9eac171 100644 --- a/sound/soc/atmel/atmel-pcm-dma.c +++ b/sound/soc/atmel/atmel-pcm-dma.c @@ -124,8 +124,7 @@ static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = { int atmel_pcm_dma_platform_register(struct device *dev) { - return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); + return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, 0); } EXPORT_SYMBOL(atmel_pcm_dma_platform_register); diff --git a/sound/soc/cirrus/ep93xx-pcm.c b/sound/soc/cirrus/ep93xx-pcm.c index 5f664471d99e..67a73330db5e 100644 --- a/sound/soc/cirrus/ep93xx-pcm.c +++ b/sound/soc/cirrus/ep93xx-pcm.c @@ -60,7 +60,6 @@ int devm_ep93xx_pcm_platform_register(struct device *dev) { return devm_snd_dmaengine_pcm_register(dev, &ep93xx_dmaengine_pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | SND_DMAENGINE_PCM_FLAG_NO_DT | SND_DMAENGINE_PCM_FLAG_COMPAT); } diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index ec79c3d5e65e..ee2671b80592 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -664,8 +664,7 @@ static int fsl_sai_probe(struct platform_device *pdev) if (sai->sai_on_imx) return imx_pcm_dma_init(pdev); else - return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); + return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); } static const struct of_device_id fsl_sai_ids[] = { diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index c9917ca5de1a..6fd1906af387 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -24,6 +24,12 @@ #include +/* + * The platforms dmaengine driver does not support reporting the amount of + * bytes that are still left to transfer. + */ +#define SND_DMAENGINE_PCM_FLAG_NO_RESIDUE BIT(31) + struct dmaengine_pcm { struct dma_chan *chan[SNDRV_PCM_STREAM_LAST + 1]; const struct snd_dmaengine_pcm_config *config; @@ -222,14 +228,18 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel( return snd_dmaengine_pcm_request_channel(fn, dma_data->filter_data); } -static bool dmaengine_pcm_can_report_residue(struct dma_chan *chan) +static bool dmaengine_pcm_can_report_residue(struct device *dev, + struct dma_chan *chan) { struct dma_slave_caps dma_caps; int ret; ret = dma_get_slave_caps(chan, &dma_caps); - if (ret != 0) - return true; + if (ret != 0) { + dev_warn(dev, "Failed to get DMA channel capabilities, falling back to period counting: %d\n", + ret); + return false; + } if (dma_caps.residue_granularity == DMA_RESIDUE_GRANULARITY_DESCRIPTOR) return false; @@ -289,14 +299,7 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) if (ret) return ret; - /* - * This will only return false if we know for sure that at least - * one channel does not support residue reporting. If the DMA - * driver does not implement the slave_caps API we rely having - * the NO_RESIDUE flag set manually in case residue reporting is - * not supported. - */ - if (!dmaengine_pcm_can_report_residue(pcm->chan[i])) + if (!dmaengine_pcm_can_report_residue(dev, pcm->chan[i])) pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE; } diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c index 51a66a87305a..f12c01dddc8d 100644 --- a/sound/soc/ux500/ux500_pcm.c +++ b/sound/soc/ux500/ux500_pcm.c @@ -147,7 +147,6 @@ int ux500_pcm_register_platform(struct platform_device *pdev) pcm_config = &ux500_dmaengine_pcm_config; ret = snd_dmaengine_pcm_register(&pdev->dev, pcm_config, - SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | SND_DMAENGINE_PCM_FLAG_COMPAT); if (ret < 0) { dev_err(&pdev->dev, -- cgit v1.2.3 From 2b5166efda83259fe1d98424a7875293718ec22e Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 22 Mar 2015 17:38:44 -0300 Subject: [media] v4l: of: Remove the head field in struct v4l2_of_endpoint The field is unused. Remove it. Signed-off-by: Sakari Ailus Acked-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-of.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h index f831c9c225b6..f66b92cc8669 100644 --- a/include/media/v4l2-of.h +++ b/include/media/v4l2-of.h @@ -57,7 +57,6 @@ struct v4l2_of_bus_parallel { * @base: struct of_endpoint containing port, id, and local of_node * @bus_type: bus type * @bus: bus configuration data structure - * @head: list head for this structure */ struct v4l2_of_endpoint { struct of_endpoint base; @@ -66,7 +65,6 @@ struct v4l2_of_endpoint { struct v4l2_of_bus_parallel parallel; struct v4l2_of_bus_mipi_csi2 mipi_csi2; } bus; - struct list_head head; }; /** -- cgit v1.2.3 From 161aadaec11cd0f610950da56f82bd1778be4156 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 22 Mar 2015 17:42:31 -0300 Subject: [media] v4l: of: Instead of zeroing bus_type and bus field separately, unify this Zero the entire struct starting from bus_type. As more fields are added, no changes will be needed in the function to reset their value explicitly. Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Sylwester Nawrocki Acked-by: Lad, Prabhakar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-of.c | 5 +++-- include/media/v4l2-of.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c index 83143d39dea7..3ac634891f75 100644 --- a/drivers/media/v4l2-core/v4l2-of.c +++ b/drivers/media/v4l2-core/v4l2-of.c @@ -149,8 +149,9 @@ int v4l2_of_parse_endpoint(const struct device_node *node, int rval; of_graph_parse_endpoint(node, &endpoint->base); - endpoint->bus_type = 0; - memset(&endpoint->bus, 0, sizeof(endpoint->bus)); + /* Zero fields from bus_type to until the end */ + memset(&endpoint->bus_type, 0, sizeof(*endpoint) - + offsetof(typeof(*endpoint), bus_type)); rval = v4l2_of_parse_csi_bus(node, endpoint); if (rval) diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h index f66b92cc8669..6c85c079544f 100644 --- a/include/media/v4l2-of.h +++ b/include/media/v4l2-of.h @@ -60,6 +60,7 @@ struct v4l2_of_bus_parallel { */ struct v4l2_of_endpoint { struct of_endpoint base; + /* Fields below this line will be zeroed by v4l2_of_parse_endpoint() */ enum v4l2_mbus_type bus_type; union { struct v4l2_of_bus_parallel parallel; -- cgit v1.2.3 From 698da18e082c8fdfa675bee6338e3f9864d5d7ee Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 22 Mar 2015 17:48:26 -0300 Subject: [media] v4l: of: Parse variable length properties --- link-frequencies The link-frequencies property is a variable length array of link frequencies in an endpoint. The array is needed by an increasing number of drivers, so it makes sense to add it to struct v4l2_of_endpoint. However, the length of the array is variable and the size of struct v4l2_of_endpoint is fixed since it is allocated by the caller. The options here are 1. to define a fixed maximum limit of link frequencies that has to be the global maximum of all boards. This is seen as problematic since the maximum could be largish, and everyone hitting the problem would need to submit a patch to fix it, or 2. parse the property in every driver. This doesn't sound appealing as two of the three implementations submitted to linux-media were wrong, and one of them was even merged before this was noticed, or 3. change the interface so that allocating and releasing memory according to the size of the array is possible. This is what the patch does. v4l2_of_alloc_parse_endpoint() is just like v4l2_of_parse_endpoint(), but it will allocate the memory resources needed to store struct v4l2_of_endpoint and the additional arrays pointed to by this struct. A corresponding release function v4l2_of_free_endpoint() is provided to release the memory allocated by v4l2_of_alloc_parse_endpoint(). In addition to this, the link-frequencies property is parsed as well, and the result is stored to struct v4l2_of_endpoint field link_frequencies. Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Sylwester Nawrocki Tested-by: Lad, Prabhakar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-of.c | 87 +++++++++++++++++++++++++++++++++++++++ include/media/v4l2-of.h | 17 ++++++++ 2 files changed, 104 insertions(+) (limited to 'include') diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c index 3ac634891f75..c52fb9620e11 100644 --- a/drivers/media/v4l2-core/v4l2-of.c +++ b/drivers/media/v4l2-core/v4l2-of.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -141,6 +142,10 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node, * V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. * The caller should hold a reference to @node. * + * NOTE: This function does not parse properties the size of which is + * variable without a low fixed limit. Please use + * v4l2_of_alloc_parse_endpoint() in new drivers instead. + * * Return: 0. */ int v4l2_of_parse_endpoint(const struct device_node *node, @@ -167,6 +172,88 @@ int v4l2_of_parse_endpoint(const struct device_node *node, } EXPORT_SYMBOL(v4l2_of_parse_endpoint); +/* + * v4l2_of_free_endpoint() - free the endpoint acquired by + * v4l2_of_alloc_parse_endpoint() + * @endpoint - the endpoint the resources of which are to be released + * + * It is safe to call this function with NULL argument or on an + * endpoint the parsing of which failed. + */ +void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) +{ + if (IS_ERR_OR_NULL(endpoint)) + return; + + kfree(endpoint->link_frequencies); + kfree(endpoint); +} +EXPORT_SYMBOL(v4l2_of_free_endpoint); + +/** + * v4l2_of_alloc_parse_endpoint() - parse all endpoint node properties + * @node: pointer to endpoint device_node + * + * All properties are optional. If none are found, we don't set any flags. + * This means the port has a static configuration and no properties have + * to be specified explicitly. + * If any properties that identify the bus as parallel are found and + * slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if we recognise + * the bus as serial CSI-2 and clock-noncontinuous isn't set, we set the + * V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag. + * The caller should hold a reference to @node. + * + * v4l2_of_alloc_parse_endpoint() has two important differences to + * v4l2_of_parse_endpoint(): + * + * 1. It also parses variable size data and + * + * 2. The memory it has allocated to store the variable size data must + * be freed using v4l2_of_free_endpoint() when no longer needed. + * + * Return: Pointer to v4l2_of_endpoint if successful, on error a + * negative error code. + */ +struct v4l2_of_endpoint *v4l2_of_alloc_parse_endpoint( + const struct device_node *node) +{ + struct v4l2_of_endpoint *endpoint; + int len; + int rval; + + endpoint = kzalloc(sizeof(*endpoint), GFP_KERNEL); + if (!endpoint) + return ERR_PTR(-ENOMEM); + + rval = v4l2_of_parse_endpoint(node, endpoint); + if (rval < 0) + goto out_err; + + if (of_get_property(node, "link-frequencies", &len)) { + endpoint->link_frequencies = kmalloc(len, GFP_KERNEL); + if (!endpoint->link_frequencies) { + rval = -ENOMEM; + goto out_err; + } + + endpoint->nr_of_link_frequencies = + len / sizeof(*endpoint->link_frequencies); + + rval = of_property_read_u64_array( + node, "link-frequencies", endpoint->link_frequencies, + endpoint->nr_of_link_frequencies); + if (rval < 0) + goto out_err; + } + + return endpoint; + +out_err: + v4l2_of_free_endpoint(endpoint); + return ERR_PTR(rval); +} +EXPORT_SYMBOL(v4l2_of_alloc_parse_endpoint); + /** * v4l2_of_parse_link() - parse a link between two endpoints * @node: pointer to the endpoint at the local end of the link diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h index 6c85c079544f..241e98aee40e 100644 --- a/include/media/v4l2-of.h +++ b/include/media/v4l2-of.h @@ -57,6 +57,8 @@ struct v4l2_of_bus_parallel { * @base: struct of_endpoint containing port, id, and local of_node * @bus_type: bus type * @bus: bus configuration data structure + * @link_frequencies: array of supported link frequencies + * @nr_of_link_frequencies: number of elements in link_frequenccies array */ struct v4l2_of_endpoint { struct of_endpoint base; @@ -66,6 +68,8 @@ struct v4l2_of_endpoint { struct v4l2_of_bus_parallel parallel; struct v4l2_of_bus_mipi_csi2 mipi_csi2; } bus; + u64 *link_frequencies; + unsigned int nr_of_link_frequencies; }; /** @@ -85,6 +89,9 @@ struct v4l2_of_link { #ifdef CONFIG_OF int v4l2_of_parse_endpoint(const struct device_node *node, struct v4l2_of_endpoint *endpoint); +struct v4l2_of_endpoint *v4l2_of_alloc_parse_endpoint( + const struct device_node *node); +void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint); int v4l2_of_parse_link(const struct device_node *node, struct v4l2_of_link *link); void v4l2_of_put_link(struct v4l2_of_link *link); @@ -96,6 +103,16 @@ static inline int v4l2_of_parse_endpoint(const struct device_node *node, return -ENOSYS; } +struct v4l2_of_endpoint *v4l2_of_alloc_parse_endpoint( + const struct device_node *node) +{ + return NULL; +} + +static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) +{ +} + static inline int v4l2_of_parse_link(const struct device_node *node, struct v4l2_of_link *link) { -- cgit v1.2.3 From 074c57a25fa2c83a264f3fdbb99a9fef0229884d Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 9 Apr 2015 04:42:38 -0300 Subject: [media] media: i2c/adp1653: Devicetree support for adp1653 Add device tree support for adp1653 flash LED driver. Signed-off-by: Pavel Machek Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adp1653.c | 100 +++++++++++++++++++++++++++++++++++++++----- include/media/adp1653.h | 8 ++-- 2 files changed, 95 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 873fe1949e98..c70ababce954 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -8,6 +8,7 @@ * Contributors: * Sakari Ailus * Tuukka Toivonen + * Pavel Machek * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -34,6 +35,8 @@ #include #include #include +#include +#include #include #include @@ -308,16 +311,28 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) { int ret; - ret = flash->platform_data->power(&flash->subdev, on); - if (ret < 0) - return ret; + if (flash->platform_data->power) { + ret = flash->platform_data->power(&flash->subdev, on); + if (ret < 0) + return ret; + } else { + gpiod_set_value(flash->platform_data->enable_gpio, on); + if (on) + /* Some delay is apparently required. */ + udelay(20); + } if (!on) return 0; ret = adp1653_init_device(flash); - if (ret < 0) + if (ret >= 0) + return ret; + + if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); + else + gpiod_set_value(flash->platform_data->enable_gpio, 0); return ret; } @@ -407,21 +422,85 @@ static int adp1653_resume(struct device *dev) #endif /* CONFIG_PM */ +static int adp1653_of_init(struct i2c_client *client, + struct adp1653_flash *flash, + struct device_node *node) +{ + struct adp1653_platform_data *pd; + struct device_node *child; + + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + flash->platform_data = pd; + + child = of_get_child_by_name(node, "flash"); + if (!child) + return -EINVAL; + + if (of_property_read_u32(child, "flash-timeout-us", + &pd->max_flash_timeout)) + goto err; + + if (of_property_read_u32(child, "flash-max-microamp", + &pd->max_flash_intensity)) + goto err; + + pd->max_flash_intensity /= 1000; + + if (of_property_read_u32(child, "led-max-microamp", + &pd->max_torch_intensity)) + goto err; + + pd->max_torch_intensity /= 1000; + of_node_put(child); + + child = of_get_child_by_name(node, "indicator"); + if (!child) + return -EINVAL; + + if (of_property_read_u32(child, "led-max-microamp", + &pd->max_indicator_intensity)) + goto err; + + of_node_put(child); + + pd->enable_gpio = devm_gpiod_get(&client->dev, "enable"); + if (!pd->enable_gpio) { + dev_err(&client->dev, "Error getting GPIO\n"); + return -EINVAL; + } + + return 0; +err: + dev_err(&client->dev, "Required property not found\n"); + of_node_put(child); + return -EINVAL; +} + + static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; - /* we couldn't work without platform data */ - if (client->dev.platform_data == NULL) - return -ENODEV; - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; - flash->platform_data = client->dev.platform_data; + if (client->dev.of_node) { + ret = adp1653_of_init(client, flash, client->dev.of_node); + if (ret) + return ret; + } else { + if (!client->dev.platform_data) { + dev_err(&client->dev, + "Neither DT not platform data provided\n"); + return EINVAL; + } + flash->platform_data = client->dev.platform_data; + } mutex_init(&flash->power_lock); @@ -442,6 +521,7 @@ static int adp1653_probe(struct i2c_client *client, return 0; free_and_quit: + dev_err(&client->dev, "adp1653: failed to register device\n"); v4l2_ctrl_handler_free(&flash->ctrls); return ret; } @@ -464,7 +544,7 @@ static const struct i2c_device_id adp1653_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, adp1653_id_table); -static struct dev_pm_ops adp1653_pm_ops = { +static const struct dev_pm_ops adp1653_pm_ops = { .suspend = adp1653_suspend, .resume = adp1653_resume, }; diff --git a/include/media/adp1653.h b/include/media/adp1653.h index 1d9b48a3bd80..9779c8549eb4 100644 --- a/include/media/adp1653.h +++ b/include/media/adp1653.h @@ -100,9 +100,11 @@ struct adp1653_platform_data { int (*power)(struct v4l2_subdev *sd, int on); u32 max_flash_timeout; /* flash light timeout in us */ - u32 max_flash_intensity; /* led intensity, flash mode */ - u32 max_torch_intensity; /* led intensity, torch mode */ - u32 max_indicator_intensity; /* indicator led intensity */ + u32 max_flash_intensity; /* led intensity, flash mode, mA */ + u32 max_torch_intensity; /* led intensity, torch mode, mA */ + u32 max_indicator_intensity; /* indicator led intensity, uA */ + + struct gpio_desc *enable_gpio; /* for device-tree based boot */ }; #define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) -- cgit v1.2.3 From 9058cbe1eed29381f84dec9f96980f5a4ea1025f Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Mon, 27 Apr 2015 21:20:56 +0800 Subject: ALSA: jack: implement kctl creating for jack devices Currently the ALSA jack core registers only input devices for each jack registered. These jack input devices are not readable by userspace devices that run as non root. This patch series will implement kctls inside the core jack part, including kctls creating, status changing report, for both HD-Audio and ASoC jack. This allows non root userspace to read jack status and act on it. This patch adds a new API called snd_jack_add_new_kctl(), which will create a kcontrol, add it to the card, and also attach it to the jack kctl list. This patch also initialises the jack kctl list after jack is newed, and reports kctl status when jack insertion/removal events occur. snd_jack_new() is updated in the following patches to also support creating phantom jacks and jack kcontrols. We then remove these duplicated features from HDA jack and have jack kctls handled by core throughout HDA and ASoC. Signed-off-by: Liam Girdwood Modified-by: Jie Yang Signed-off-by: Jie Yang Reveiwed-by: Mark Brown Signed-off-by: Takashi Iwai --- include/sound/jack.h | 9 ++++- sound/core/Kconfig | 3 -- sound/core/Makefile | 3 +- sound/core/jack.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/Kconfig | 2 +- 5 files changed, 103 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/sound/jack.h b/include/sound/jack.h index 218235030ebc..433b13b89125 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -73,6 +73,8 @@ enum snd_jack_types { struct snd_jack { struct input_dev *input_dev; + struct list_head kctl_list; + struct snd_card *card; int registered; int type; const char *id; @@ -86,6 +88,7 @@ struct snd_jack { int snd_jack_new(struct snd_card *card, const char *id, int type, struct snd_jack **jack); +int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent); int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type, int keytype); @@ -93,13 +96,17 @@ int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type, void snd_jack_report(struct snd_jack *jack, int status); #else - static inline int snd_jack_new(struct snd_card *card, const char *id, int type, struct snd_jack **jack) { return 0; } +static inline int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask) +{ + return 0; +} + static inline void snd_jack_set_parent(struct snd_jack *jack, struct device *parent) { diff --git a/sound/core/Kconfig b/sound/core/Kconfig index 313f22e9d929..63cc2e967099 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -221,9 +221,6 @@ config SND_PCM_XRUN_DEBUG config SND_VMASTER bool -config SND_KCTL_JACK - bool - config SND_DMA_SGBUF def_bool y depends on X86 diff --git a/sound/core/Makefile b/sound/core/Makefile index 4daf2f58261c..e041dc25f2c8 100644 --- a/sound/core/Makefile +++ b/sound/core/Makefile @@ -7,8 +7,7 @@ snd-y := sound.o init.o memory.o info.o control.o misc.o device.o snd-$(CONFIG_ISA_DMA_API) += isadma.o snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o snd-$(CONFIG_SND_VMASTER) += vmaster.o -snd-$(CONFIG_SND_KCTL_JACK) += ctljack.o -snd-$(CONFIG_SND_JACK) += jack.o +snd-$(CONFIG_SND_JACK) += ctljack.o jack.o snd-pcm-y := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \ pcm_memory.o memalloc.o diff --git a/sound/core/jack.c b/sound/core/jack.c index 8658578eb584..db69ecc23651 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -24,6 +24,13 @@ #include #include #include +#include + +struct snd_jack_kctl { + struct snd_kcontrol *kctl; + struct list_head list; /* list of controls belong to the same jack */ + unsigned int mask_bits; /* only masked status bits are reported via kctl */ +}; static int jack_switch_types[SND_JACK_SWITCH_TYPES] = { SW_HEADPHONE_INSERT, @@ -54,7 +61,13 @@ static int snd_jack_dev_disconnect(struct snd_device *device) static int snd_jack_dev_free(struct snd_device *device) { struct snd_jack *jack = device->device_data; + struct snd_card *card = device->card; + struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl; + list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, list) { + list_del_init(&jack_kctl->list); + snd_ctl_remove(card, jack_kctl->kctl); + } if (jack->private_free) jack->private_free(jack); @@ -100,6 +113,77 @@ static int snd_jack_dev_register(struct snd_device *device) return err; } +static void snd_jack_kctl_private_free(struct snd_kcontrol *kctl) +{ + struct snd_jack_kctl *jack_kctl; + + jack_kctl = kctl->private_data; + if (jack_kctl) { + list_del(&jack_kctl->list); + kfree(jack_kctl); + } +} + +static void snd_jack_kctl_add(struct snd_jack *jack, struct snd_jack_kctl *jack_kctl) +{ + list_add_tail(&jack_kctl->list, &jack->kctl_list); +} + +static struct snd_jack_kctl * snd_jack_kctl_new(struct snd_card *card, const char *name, unsigned int mask) +{ + struct snd_kcontrol *kctl; + struct snd_jack_kctl *jack_kctl; + int err; + + kctl = snd_kctl_jack_new(name, 0, card); + if (!kctl) + return NULL; + + err = snd_ctl_add(card, kctl); + if (err < 0) + return NULL; + + jack_kctl = kzalloc(sizeof(*jack_kctl), GFP_KERNEL); + + if (!jack_kctl) + goto error; + + jack_kctl->kctl = kctl; + jack_kctl->mask_bits = mask; + + kctl->private_data = jack_kctl; + kctl->private_free = snd_jack_kctl_private_free; + + return jack_kctl; +error: + snd_ctl_free_one(kctl); + return NULL; +} + +/** + * snd_jack_add_new_kctl - Create a new snd_jack_kctl and add it to jack + * @jack: the jack instance which the kctl will attaching to + * @name: the name for the snd_kcontrol object + * @mask: a bitmask of enum snd_jack_type values that can be detected + * by this snd_jack_kctl object. + * + * Creates a new snd_kcontrol object and adds it to the jack kctl_list. + * + * Return: Zero if successful, or a negative error code on failure. + */ +int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask) +{ + struct snd_jack_kctl *jack_kctl; + + jack_kctl = snd_jack_kctl_new(jack->card, name, mask); + if (!jack_kctl) + return -ENOMEM; + + snd_jack_kctl_add(jack, jack_kctl); + return 0; +} +EXPORT_SYMBOL(snd_jack_add_new_kctl); + /** * snd_jack_new - Create a new jack * @card: the card instance @@ -150,6 +234,9 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, if (err < 0) goto fail_input; + jack->card = card; + INIT_LIST_HEAD(&jack->kctl_list); + *jjack = jack; return 0; @@ -230,6 +317,7 @@ EXPORT_SYMBOL(snd_jack_set_key); */ void snd_jack_report(struct snd_jack *jack, int status) { + struct snd_jack_kctl *jack_kctl; int i; if (!jack) @@ -252,6 +340,11 @@ void snd_jack_report(struct snd_jack *jack, int status) } input_sync(jack->input_dev); + + list_for_each_entry(jack_kctl, &jack->kctl_list, list) + snd_kctl_jack_report(jack->card, jack_kctl->kctl, + status & jack_kctl->mask_bits); + } EXPORT_SYMBOL(snd_jack_report); diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index a5ed1c181784..4d3d4747e55a 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -4,7 +4,7 @@ config SND_HDA tristate select SND_PCM select SND_VMASTER - select SND_KCTL_JACK + select SND_JACK select SND_HDA_CORE config SND_HDA_INTEL -- cgit v1.2.3 From b8dd086674cfbfc246a5b9d7d7ff37f62350a878 Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Mon, 27 Apr 2015 21:20:57 +0800 Subject: ALSA: Jack: handle jack embedded kcontrol creating within ctljack This patch adds a static method get_available_index() to allocate the index of new jack kcontrols and also adds jack_kctl_name_gen() which is used to ensure compatibility with jack naming by removing " Jack" from some incorrectly passed names. Signed-off-by: Jie Yang Signed-off-by: Takashi Iwai --- include/sound/control.h | 2 +- sound/core/ctljack.c | 37 ++++++++++++++++++++++++++++++++++--- sound/core/jack.c | 2 +- sound/pci/hda/hda_jack.c | 2 +- 4 files changed, 37 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/sound/control.h b/include/sound/control.h index 95aad6d3fd1a..f50e2e918ceb 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -252,7 +252,7 @@ void snd_ctl_sync_vmaster(struct snd_kcontrol *kctl, bool hook_only); * Helper functions for jack-detection controls */ struct snd_kcontrol * -snd_kctl_jack_new(const char *name, int idx, void *private_data); +snd_kctl_jack_new(const char *name, void *private_data, struct snd_card *card); void snd_kctl_jack_report(struct snd_card *card, struct snd_kcontrol *kctl, bool status); diff --git a/sound/core/ctljack.c b/sound/core/ctljack.c index e4b38fbe51da..df7c6cd63c4a 100644 --- a/sound/core/ctljack.c +++ b/sound/core/ctljack.c @@ -31,15 +31,46 @@ static struct snd_kcontrol_new jack_detect_kctl = { .get = jack_detect_kctl_get, }; +static int get_available_index(struct snd_card *card, const char *name) +{ + struct snd_ctl_elem_id sid; + + memset(&sid, 0, sizeof(sid)); + + sid.index = 0; + sid.iface = SNDRV_CTL_ELEM_IFACE_CARD; + strlcpy(sid.name, name, sizeof(sid.name)); + + while (snd_ctl_find_id(card, &sid)) + sid.index++; + + return sid.index; +} + +static void jack_kctl_name_gen(char *name, const char *src_name, int size) +{ + size_t count = strlen(src_name); + bool need_cat = true; + + /* remove redundant " Jack" from src_name */ + if (count >= 5) + need_cat = strncmp(&src_name[count - 5], " Jack", 5) ? true : false; + + snprintf(name, size, need_cat ? "%s Jack" : "%s", src_name); + +} + struct snd_kcontrol * -snd_kctl_jack_new(const char *name, int idx, void *private_data) +snd_kctl_jack_new(const char *name, void *private_data, struct snd_card *card) { struct snd_kcontrol *kctl; + kctl = snd_ctl_new1(&jack_detect_kctl, private_data); if (!kctl) return NULL; - snprintf(kctl->id.name, sizeof(kctl->id.name), "%s Jack", name); - kctl->id.index = idx; + + jack_kctl_name_gen(kctl->id.name, name, sizeof(kctl->id.name)); + kctl->id.index = get_available_index(card, name); kctl->private_value = 0; return kctl; } diff --git a/sound/core/jack.c b/sound/core/jack.c index db69ecc23651..067d37d14e64 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -135,7 +135,7 @@ static struct snd_jack_kctl * snd_jack_kctl_new(struct snd_card *card, const cha struct snd_jack_kctl *jack_kctl; int err; - kctl = snd_kctl_jack_new(name, 0, card); + kctl = snd_kctl_jack_new(name, card, card); if (!kctl) return NULL; diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c index d7cfe7b8c32b..05b49aa8af6c 100644 --- a/sound/pci/hda/hda_jack.c +++ b/sound/pci/hda/hda_jack.c @@ -402,7 +402,7 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, return 0; if (jack->kctl) return 0; /* already created */ - kctl = snd_kctl_jack_new(name, idx, codec); + kctl = snd_kctl_jack_new(name, codec, codec->card); if (!kctl) return -ENOMEM; err = snd_hda_ctl_add(codec, nid, kctl); -- cgit v1.2.3 From 4e3f0dc65883cac95807549b2f7a3ac183686bcb Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Mon, 27 Apr 2015 21:20:58 +0800 Subject: ALSA: jack: extend snd_jack_new to support phantom jack Dont create input devices for phantom jacks. Here, we extend snd_jack_new() to support phantom jack creating: pass in a bool param for [non-]phantom flag, and a bool param initial_jack to indicate whether we need to create a kctl at this stage. We can also add a kctl to the jack after its created meaning we can now integrate the HDA and ASoC jacks. Signed-off-by: Jie Yang Signed-off-by: Takashi Iwai --- include/sound/jack.h | 4 ++-- sound/core/jack.c | 40 ++++++++++++++++++++++++++++------------ sound/pci/hda/hda_jack.c | 2 +- sound/pci/oxygen/xonar_wm87x6.c | 2 +- sound/soc/soc-jack.c | 2 +- 5 files changed, 33 insertions(+), 17 deletions(-) (limited to 'include') diff --git a/include/sound/jack.h b/include/sound/jack.h index 433b13b89125..23bede121c78 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -87,7 +87,7 @@ struct snd_jack { #ifdef CONFIG_SND_JACK int snd_jack_new(struct snd_card *card, const char *id, int type, - struct snd_jack **jack); + struct snd_jack **jack, bool initial_kctl, bool phantom_jack); int snd_jack_add_new_kctl(struct snd_jack *jack, const char * name, int mask); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent); int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type, @@ -97,7 +97,7 @@ void snd_jack_report(struct snd_jack *jack, int status); #else static inline int snd_jack_new(struct snd_card *card, const char *id, int type, - struct snd_jack **jack) + struct snd_jack **jack, bool initial_kctl, bool phantom_jack) { return 0; } diff --git a/sound/core/jack.c b/sound/core/jack.c index 067d37d14e64..b34187b072ea 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -191,6 +191,8 @@ EXPORT_SYMBOL(snd_jack_add_new_kctl); * @type: a bitmask of enum snd_jack_type values that can be detected by * this jack * @jjack: Used to provide the allocated jack object to the caller. + * @initial_kctl: if true, create a kcontrol and add it to the jack list. + * @phantom_jack: Don't create a input device for phantom jacks. * * Creates a new jack object. * @@ -198,9 +200,10 @@ EXPORT_SYMBOL(snd_jack_add_new_kctl); * On success @jjack will be initialised. */ int snd_jack_new(struct snd_card *card, const char *id, int type, - struct snd_jack **jjack) + struct snd_jack **jjack, bool initial_kctl, bool phantom_jack) { struct snd_jack *jack; + struct snd_jack_kctl *jack_kctl = NULL; int err; int i; static struct snd_device_ops ops = { @@ -209,26 +212,36 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, .dev_disconnect = snd_jack_dev_disconnect, }; + if (initial_kctl) { + jack_kctl = snd_jack_kctl_new(card, id, type); + if (!jack_kctl) + return -ENOMEM; + } + jack = kzalloc(sizeof(struct snd_jack), GFP_KERNEL); if (jack == NULL) return -ENOMEM; jack->id = kstrdup(id, GFP_KERNEL); - jack->input_dev = input_allocate_device(); - if (jack->input_dev == NULL) { - err = -ENOMEM; - goto fail_input; - } + /* don't creat input device for phantom jack */ + if (!phantom_jack) { + jack->input_dev = input_allocate_device(); + if (jack->input_dev == NULL) { + err = -ENOMEM; + goto fail_input; + } - jack->input_dev->phys = "ALSA"; + jack->input_dev->phys = "ALSA"; - jack->type = type; + jack->type = type; - for (i = 0; i < SND_JACK_SWITCH_TYPES; i++) - if (type & (1 << i)) - input_set_capability(jack->input_dev, EV_SW, - jack_switch_types[i]); + for (i = 0; i < SND_JACK_SWITCH_TYPES; i++) + if (type & (1 << i)) + input_set_capability(jack->input_dev, EV_SW, + jack_switch_types[i]); + + } err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops); if (err < 0) @@ -237,6 +250,9 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, jack->card = card; INIT_LIST_HEAD(&jack->kctl_list); + if (initial_kctl) + snd_jack_kctl_add(jack, jack_kctl); + *jjack = jack; return 0; diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c index 05b49aa8af6c..16281c69bcd6 100644 --- a/sound/pci/hda/hda_jack.c +++ b/sound/pci/hda/hda_jack.c @@ -417,7 +417,7 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, if (!phantom_jack) { jack->type = get_input_jack_type(codec, nid); err = snd_jack_new(codec->card, name, jack->type, - &jack->jack); + &jack->jack, false, false); if (err < 0) return err; jack->jack->private_data = jack; diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c index 6ce68604c25e..90ac479f389f 100644 --- a/sound/pci/oxygen/xonar_wm87x6.c +++ b/sound/pci/oxygen/xonar_wm87x6.c @@ -286,7 +286,7 @@ static void xonar_ds_init(struct oxygen *chip) xonar_enable_output(chip); snd_jack_new(chip->card, "Headphone", - SND_JACK_HEADPHONE, &data->hp_jack); + SND_JACK_HEADPHONE, &data->hp_jack, false, false); xonar_ds_handle_hp_jack(chip); snd_component_add(chip->card, "WM8776"); diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 9f60c25c4568..70a9bdd5f3e3 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -48,7 +48,7 @@ int snd_soc_card_jack_new(struct snd_soc_card *card, const char *id, int type, INIT_LIST_HEAD(&jack->jack_zones); BLOCKING_INIT_NOTIFIER_HEAD(&jack->notifier); - ret = snd_jack_new(card->snd_card, id, type, &jack->jack); + ret = snd_jack_new(card->snd_card, id, type, &jack->jack, false, false); if (ret) return ret; -- cgit v1.2.3 From 2ba2dfa1fcc7ce5d2bf1716ec3d32b6fa0882e68 Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Mon, 27 Apr 2015 21:20:59 +0800 Subject: ALSA: hda - Update to use the new jack kctls method Jack snd_kcontrols can now be created during snd_jack_new() or by later calling snd_jack_add_new_kctls(). This patch creates the jacks during the initialisation stage for both phantom and non phantom jacks. Signed-off-by: Jie Yang Signed-off-by: Takashi Iwai --- include/sound/control.h | 2 +- sound/core/ctljack.c | 4 +-- sound/core/jack.c | 2 +- sound/pci/hda/hda_jack.c | 90 +++++++++++++--------------------------------- sound/pci/hda/hda_jack.h | 5 +-- sound/pci/hda/patch_hdmi.c | 2 +- 6 files changed, 31 insertions(+), 74 deletions(-) (limited to 'include') diff --git a/include/sound/control.h b/include/sound/control.h index f50e2e918ceb..21d047f229a1 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -252,7 +252,7 @@ void snd_ctl_sync_vmaster(struct snd_kcontrol *kctl, bool hook_only); * Helper functions for jack-detection controls */ struct snd_kcontrol * -snd_kctl_jack_new(const char *name, void *private_data, struct snd_card *card); +snd_kctl_jack_new(const char *name, struct snd_card *card); void snd_kctl_jack_report(struct snd_card *card, struct snd_kcontrol *kctl, bool status); diff --git a/sound/core/ctljack.c b/sound/core/ctljack.c index df7c6cd63c4a..6435e82cacf9 100644 --- a/sound/core/ctljack.c +++ b/sound/core/ctljack.c @@ -61,11 +61,11 @@ static void jack_kctl_name_gen(char *name, const char *src_name, int size) } struct snd_kcontrol * -snd_kctl_jack_new(const char *name, void *private_data, struct snd_card *card) +snd_kctl_jack_new(const char *name, struct snd_card *card) { struct snd_kcontrol *kctl; - kctl = snd_ctl_new1(&jack_detect_kctl, private_data); + kctl = snd_ctl_new1(&jack_detect_kctl, NULL); if (!kctl) return NULL; diff --git a/sound/core/jack.c b/sound/core/jack.c index b34187b072ea..e8b51f52e7df 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -135,7 +135,7 @@ static struct snd_jack_kctl * snd_jack_kctl_new(struct snd_card *card, const cha struct snd_jack_kctl *jack_kctl; int err; - kctl = snd_kctl_jack_new(name, card, card); + kctl = snd_kctl_jack_new(name, card); if (!kctl) return NULL; diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c index 16281c69bcd6..366efbf87d41 100644 --- a/sound/pci/hda/hda_jack.c +++ b/sound/pci/hda/hda_jack.c @@ -132,11 +132,11 @@ void snd_hda_jack_tbl_clear(struct hda_codec *codec) for (i = 0; i < codec->jacktbl.used; i++, jack++) { struct hda_jack_callback *cb, *next; -#ifdef CONFIG_SND_HDA_INPUT_JACK + /* free jack instances manually when clearing/reconfiguring */ if (!codec->bus->shutdown && jack->jack) snd_device_free(codec->card, jack->jack); -#endif + for (cb = jack->callback; cb; cb = next) { next = cb->next; kfree(cb); @@ -337,20 +337,15 @@ void snd_hda_jack_report_sync(struct hda_codec *codec) jack = codec->jacktbl.list; for (i = 0; i < codec->jacktbl.used; i++, jack++) if (jack->nid) { - if (!jack->kctl || jack->block_report) + if (!jack->jack || jack->block_report) continue; state = get_jack_plug_state(jack->pin_sense); - snd_kctl_jack_report(codec->card, jack->kctl, state); -#ifdef CONFIG_SND_HDA_INPUT_JACK - if (jack->jack) - snd_jack_report(jack->jack, - state ? jack->type : 0); -#endif + snd_jack_report(jack->jack, + state ? jack->type : 0); } } EXPORT_SYMBOL_GPL(snd_hda_jack_report_sync); -#ifdef CONFIG_SND_HDA_INPUT_JACK /* guess the jack type from the pin-config */ static int get_input_jack_type(struct hda_codec *codec, hda_nid_t nid) { @@ -377,54 +372,42 @@ static void hda_free_jack_priv(struct snd_jack *jack) jacks->nid = 0; jacks->jack = NULL; } -#endif /** * snd_hda_jack_add_kctl - Add a kctl for the given pin * @codec: the HDA codec * @nid: pin NID to assign * @name: string name for the jack - * @idx: index number for the jack * @phantom_jack: flag to deal as a phantom jack * * This assigns a jack-detection kctl to the given pin. The kcontrol * will have the given name and index. */ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, - const char *name, int idx, bool phantom_jack) + const char *name, bool phantom_jack) { struct hda_jack_tbl *jack; - struct snd_kcontrol *kctl; - int err, state; + int err, state, type; jack = snd_hda_jack_tbl_new(codec, nid); if (!jack) return 0; - if (jack->kctl) + if (jack->jack) return 0; /* already created */ - kctl = snd_kctl_jack_new(name, codec, codec->card); - if (!kctl) - return -ENOMEM; - err = snd_hda_ctl_add(codec, nid, kctl); + + type = get_input_jack_type(codec, nid); + err = snd_jack_new(codec->card, name, type, + &jack->jack, true, phantom_jack); if (err < 0) return err; - jack->kctl = kctl; - jack->phantom_jack = !!phantom_jack; + jack->phantom_jack = !!phantom_jack; + jack->type = type; + jack->jack->private_data = jack; + jack->jack->private_free = hda_free_jack_priv; state = snd_hda_jack_detect(codec, nid); - snd_kctl_jack_report(codec->card, kctl, state); -#ifdef CONFIG_SND_HDA_INPUT_JACK - if (!phantom_jack) { - jack->type = get_input_jack_type(codec, nid); - err = snd_jack_new(codec->card, name, jack->type, - &jack->jack, false, false); - if (err < 0) - return err; - jack->jack->private_data = jack; - jack->jack->private_free = hda_free_jack_priv; - snd_jack_report(jack->jack, state ? jack->type : 0); - } -#endif + snd_jack_report(jack->jack, state ? jack->type : 0); + return 0; } @@ -433,44 +416,23 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, * @codec: the HDA codec * @nid: pin NID * @name: the name string for the jack ctl - * @idx: the ctl index for the jack ctl * * This is a simple helper calling __snd_hda_jack_add_kctl(). */ int snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, - const char *name, int idx) + const char *name) { - return __snd_hda_jack_add_kctl(codec, nid, name, idx, false); + return __snd_hda_jack_add_kctl(codec, nid, name, false); } EXPORT_SYMBOL_GPL(snd_hda_jack_add_kctl); -/* get the unique index number for the given kctl name */ -static int get_unique_index(struct hda_codec *codec, const char *name, int idx) -{ - struct hda_jack_tbl *jack; - int i, len = strlen(name); - again: - jack = codec->jacktbl.list; - for (i = 0; i < codec->jacktbl.used; i++, jack++) { - /* jack->kctl.id contains "XXX Jack" name string with index */ - if (jack->kctl && - !strncmp(name, jack->kctl->id.name, len) && - !strcmp(" Jack", jack->kctl->id.name + len) && - jack->kctl->id.index == idx) { - idx++; - goto again; - } - } - return idx; -} - static int add_jack_kctl(struct hda_codec *codec, hda_nid_t nid, const struct auto_pin_cfg *cfg, const char *base_name) { unsigned int def_conf, conn; char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - int idx, err; + int err; bool phantom_jack; if (!nid) @@ -482,16 +444,14 @@ static int add_jack_kctl(struct hda_codec *codec, hda_nid_t nid, phantom_jack = (conn != AC_JACK_PORT_COMPLEX) || !is_jack_detectable(codec, nid); - if (base_name) { + if (base_name) strlcpy(name, base_name, sizeof(name)); - idx = 0; - } else - snd_hda_get_pin_label(codec, nid, cfg, name, sizeof(name), &idx); + else + snd_hda_get_pin_label(codec, nid, cfg, name, sizeof(name), NULL); if (phantom_jack) /* Example final name: "Internal Mic Phantom Jack" */ strncat(name, " Phantom", sizeof(name) - strlen(name) - 1); - idx = get_unique_index(codec, name, idx); - err = __snd_hda_jack_add_kctl(codec, nid, name, idx, phantom_jack); + err = __snd_hda_jack_add_kctl(codec, nid, name, phantom_jack); if (err < 0) return err; diff --git a/sound/pci/hda/hda_jack.h b/sound/pci/hda/hda_jack.h index b279e327a23b..387d30984dfe 100644 --- a/sound/pci/hda/hda_jack.h +++ b/sound/pci/hda/hda_jack.h @@ -39,11 +39,8 @@ struct hda_jack_tbl { unsigned int block_report:1; /* in a transitional state - do not report to userspace */ hda_nid_t gating_jack; /* valid when gating jack plugged */ hda_nid_t gated_jack; /* gated is dependent on this jack */ - struct snd_kcontrol *kctl; /* assigned kctl for jack-detection */ -#ifdef CONFIG_SND_HDA_INPUT_JACK int type; struct snd_jack *jack; -#endif }; struct hda_jack_tbl * @@ -85,7 +82,7 @@ static inline bool snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid) bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid); int snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid, - const char *name, int idx); + const char *name); int snd_hda_jack_add_kctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5f44f60a6389..67a85ca25e35 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2081,7 +2081,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx) strncat(hdmi_str, " Phantom", sizeof(hdmi_str) - strlen(hdmi_str) - 1); - return snd_hda_jack_add_kctl(codec, per_pin->pin_nid, hdmi_str, 0); + return snd_hda_jack_add_kctl(codec, per_pin->pin_nid, hdmi_str); } static int generic_hdmi_build_controls(struct hda_codec *codec) -- cgit v1.2.3 From 2dc0f16b83b43fd1f86a2358d46f46488230c6c8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 21 Apr 2015 07:02:34 +0000 Subject: ASoC: soc.h: tidyup struct snd_soc_dai_link definition order Current struct snd_soc_dai_link has many members, but definition order was random. Especially, bool / bit field are defined randomly. This patch tidyups these definition order to calculate data alignment easy. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index fcb312b3f258..38757fe7a3d8 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -949,6 +949,24 @@ struct snd_soc_dai_link { enum snd_soc_dpcm_trigger trigger[2]; /* trigger type for DPCM */ + /* codec/machine specific init - e.g. add machine controls */ + int (*init)(struct snd_soc_pcm_runtime *rtd); + + /* optional hw_params re-writing for BE and FE sync */ + int (*be_hw_params_fixup)(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params); + + /* machine stream operations */ + const struct snd_soc_ops *ops; + const struct snd_soc_compr_ops *compr_ops; + + /* For unidirectional dai links */ + bool playback_only; + bool capture_only; + + /* Mark this pcm with non atomic ops */ + bool nonatomic; + /* Keep DAI active over suspend */ unsigned int ignore_suspend:1; @@ -957,9 +975,6 @@ struct snd_soc_dai_link { unsigned int symmetric_channels:1; unsigned int symmetric_samplebits:1; - /* Mark this pcm with non atomic ops */ - bool nonatomic; - /* Do not create a PCM for this DAI link (Backend link) */ unsigned int no_pcm:1; @@ -972,21 +987,6 @@ struct snd_soc_dai_link { /* pmdown_time is ignored at stop */ unsigned int ignore_pmdown_time:1; - - /* codec/machine specific init - e.g. add machine controls */ - int (*init)(struct snd_soc_pcm_runtime *rtd); - - /* optional hw_params re-writing for BE and FE sync */ - int (*be_hw_params_fixup)(struct snd_soc_pcm_runtime *rtd, - struct snd_pcm_hw_params *params); - - /* machine stream operations */ - const struct snd_soc_ops *ops; - const struct snd_soc_compr_ops *compr_ops; - - /* For unidirectional dai links */ - bool playback_only; - bool capture_only; }; struct snd_soc_codec_conf { -- cgit v1.2.3 From 39ed68c8cd3aff417603a95d0594308598b9f469 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 27 Apr 2015 22:13:22 +0200 Subject: ASoC: Add helper function getting CODEC's DAPM context The DAPM context in the snd_soc_codec struct is redundant and scheduled to be replaced by the DAPM context in the snd_soc_component struct. This patch introduces a new helper function snd_soc_codec_get_dapm() which should be used for getting the DAPM context for a CODEC rather then directly accessing the dapm field. Once there are no more direct users of the dapm field left it is possible to transparently switch all drivers to the component DAPM context by updating snd_soc_codec_get_dapm() function. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index fcb312b3f258..2f742009da4b 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -807,7 +807,7 @@ struct snd_soc_codec { /* component */ struct snd_soc_component component; - /* dapm */ + /* Don't access this directly, use snd_soc_codec_get_dapm() */ struct snd_soc_dapm_context dapm; #ifdef CONFIG_DEBUG_FS @@ -1269,6 +1269,18 @@ static inline struct snd_soc_dapm_context *snd_soc_component_get_dapm( return component->dapm_ptr; } +/** + * snd_soc_codec_get_dapm() - Returns the DAPM context for the CODEC + * @codec: The CODEC for which to get the DAPM context + * + * Note: Use this function instead of directly accessing the CODEC's dapm field + */ +static inline struct snd_soc_dapm_context *snd_soc_codec_get_dapm( + struct snd_soc_codec *codec) +{ + return &codec->dapm; +} + /** * snd_soc_dapm_kcontrol_codec() - Returns the codec associated to a kcontrol * @kcontrol: The kcontrol -- cgit v1.2.3 From fa880775ab0d5a8d540972f7b6800fad1af16b75 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 27 Apr 2015 22:13:23 +0200 Subject: ASoC: Add helper functions bias level management Currently drivers are responsible for managing the bias_level field of their DAPM context. The DAPM state itself is managed by the DAPM core though and the core has certain expectations on how and when the bias_level field should be updated. If drivers don't adhere to these undefined behavior can occur. This patch adds a few helper functions for manipulating the DAPM context state, each function with a description on when it should be used and what its effects are. This will also help us to move more of the bias_level management from drivers to the DAPM core. For convenience also add snd_soc_codec_* wrappers around these helpers. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 34 ++++++++++++++++++++++++++++++++++ include/sound/soc.h | 40 ++++++++++++++++++++++++++++++++++++++++ sound/soc/soc-dapm.c | 35 +++++++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 0bc83647d3fa..70216d20e897 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -444,6 +444,9 @@ int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream, struct snd_soc_dapm_context *snd_soc_dapm_kcontrol_dapm( struct snd_kcontrol *kcontrol); +int snd_soc_dapm_force_bias_level(struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level); + /* dapm widget types */ enum snd_soc_dapm_type { snd_soc_dapm_input = 0, /* input pin */ @@ -623,4 +626,35 @@ struct snd_soc_dapm_stats { int neighbour_checks; }; +/** + * snd_soc_dapm_init_bias_level() - Initialize DAPM bias level + * @dapm: The DAPM context to initialize + * @level: The DAPM level to initialize to + * + * This function only sets the driver internal state of the DAPM level and will + * not modify the state of the device. Hence it should not be used during normal + * operation, but only to synchronize the internal state to the device state. + * E.g. during driver probe to set the DAPM level to the one corresponding with + * the power-on reset state of the device. + * + * To change the DAPM state of the device use snd_soc_dapm_set_bias_level(). + */ +static inline void snd_soc_dapm_init_bias_level( + struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) +{ + dapm->bias_level = level; +} + +/** + * snd_soc_dapm_get_bias_level() - Get current DAPM bias level + * @dapm: The context for which to get the bias level + * + * Returns: The current bias level of the passed DAPM context. + */ +static inline enum snd_soc_bias_level snd_soc_dapm_get_bias_level( + struct snd_soc_dapm_context *dapm) +{ + return dapm->bias_level; +} + #endif diff --git a/include/sound/soc.h b/include/sound/soc.h index 2f742009da4b..7781bfe85c5d 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1281,6 +1281,46 @@ static inline struct snd_soc_dapm_context *snd_soc_codec_get_dapm( return &codec->dapm; } +/** + * snd_soc_dapm_init_bias_level() - Initialize CODEC DAPM bias level + * @dapm: The CODEC for which to initialize the DAPM bias level + * @level: The DAPM level to initialize to + * + * Initializes the CODEC DAPM bias level. See snd_soc_dapm_init_bias_level(). + */ +static inline void snd_soc_codec_init_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + snd_soc_dapm_init_bias_level(snd_soc_codec_get_dapm(codec), level); +} + +/** + * snd_soc_dapm_get_bias_level() - Get current CODEC DAPM bias level + * @codec: The CODEC for which to get the DAPM bias level + * + * Returns: The current DAPM bias level of the CODEC. + */ +static inline enum snd_soc_bias_level snd_soc_codec_get_bias_level( + struct snd_soc_codec *codec) +{ + return snd_soc_dapm_get_bias_level(snd_soc_codec_get_dapm(codec)); +} + +/** + * snd_soc_codec_force_bias_level() - Set the CODEC DAPM bias level + * @codec: The CODEC for which to set the level + * @level: The level to set to + * + * Forces the CODEC bias level to a specific state. See + * snd_soc_dapm_force_bias_level(). + */ +static inline int snd_soc_codec_force_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + return snd_soc_dapm_force_bias_level(snd_soc_codec_get_dapm(codec), + level); +} + /** * snd_soc_dapm_kcontrol_codec() - Returns the codec associated to a kcontrol * @kcontrol: The kcontrol diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index defe0f0082b5..b24782b50809 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -525,6 +525,35 @@ static void soc_dapm_async_complete(struct snd_soc_dapm_context *dapm) snd_soc_component_async_complete(dapm->component); } +/** + * snd_soc_dapm_force_bias_level() - Sets the DAPM bias level + * @dapm: The DAPM context for which to set the level + * @level: The level to set + * + * Forces the DAPM bias level to a specific state. It will call the bias level + * callback of DAPM context with the specified level. This will even happen if + * the context is already at the same level. Furthermore it will not go through + * the normal bias level sequencing, meaning any intermediate states between the + * current and the target state will not be entered. + * + * Note that the change in bias level is only temporary and the next time + * snd_soc_dapm_sync() is called the state will be set to the level as + * determined by the DAPM core. The function is mainly intended to be used to + * used during probe or resume from suspend to power up the device so + * initialization can be done, before the DAPM core takes over. + */ +int snd_soc_dapm_force_bias_level(struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level) +{ + int ret = 0; + + if (dapm->set_bias_level) + ret = dapm->set_bias_level(dapm, level); + + return ret; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_force_bias_level); + /** * snd_soc_dapm_set_bias_level - set the bias level for the system * @dapm: DAPM context @@ -547,10 +576,8 @@ static int snd_soc_dapm_set_bias_level(struct snd_soc_dapm_context *dapm, if (ret != 0) goto out; - if (dapm->set_bias_level) - ret = dapm->set_bias_level(dapm, level); - else if (!card || dapm != &card->dapm) - dapm->bias_level = level; + if (!card || dapm != &card->dapm) + ret = snd_soc_dapm_force_bias_level(dapm, level); if (ret != 0) goto out; -- cgit v1.2.3 From 480856f3b462d5b8d24e40ac3693c5620bdd5617 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Apr 2015 03:41:00 -0300 Subject: [media] v4l2-of: fix compiler errors if CONFIG_OF is undefined You must use static inline otherwise you get these errors if CONFIG_OF is not defined: In file included from drivers/media/platform/soc_camera/soc_camera.c:39:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/atmel-isi.c:28:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/rcar_vin.c:36:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-of.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-of.h b/include/media/v4l2-of.h index 241e98aee40e..4dc34b245d47 100644 --- a/include/media/v4l2-of.h +++ b/include/media/v4l2-of.h @@ -103,13 +103,13 @@ static inline int v4l2_of_parse_endpoint(const struct device_node *node, return -ENOSYS; } -struct v4l2_of_endpoint *v4l2_of_alloc_parse_endpoint( +static inline struct v4l2_of_endpoint *v4l2_of_alloc_parse_endpoint( const struct device_node *node) { return NULL; } -static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) +static inline void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) { } -- cgit v1.2.3 From 591fc116f3302da915bb57d4474a61a5e8884cec Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 11:34:22 +0300 Subject: usb: phy: msm: Use extcon framework for VBUS and ID detection On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 7 ++ drivers/usb/phy/Kconfig | 1 + drivers/usb/phy/phy-msm-usb.c | 84 ++++++++++++++++++++++ include/linux/usb/msm_hsusb.h | 17 +++++ 4 files changed, 109 insertions(+) (limited to 'include') diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 2826f2af503a..f26bcfac3d8f 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -69,6 +69,13 @@ Optional properties: (no, min, max) where each value represents either a voltage in microvolts or a value corresponding to voltage corner. +- extcon: phandles to external connector devices. First phandle + should point to external connector, which provide "USB" + cable events, the second should point to external connector + device, which provide "USB-HOST" cable events. If one of + the external connector devices is not required empty <0> + phandle should be specified. + Example HSUSB OTG controller device node: usb@f9a55000 { diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2175678e674e..811f331892d7 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -141,6 +141,7 @@ config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST) depends on RESET_CONTROLLER + depends on EXTCON select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index c9156beeadef..ad66c67ce9a5 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1436,9 +1436,42 @@ static const struct of_device_id msm_otg_dt_match[] = { }; MODULE_DEVICE_TABLE(of, msm_otg_dt_match); +static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus); + + if (event) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + +static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb); + struct msm_otg *motg = container_of(id, struct msm_otg, id); + + if (event) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; + struct extcon_dev *ext_id, *ext_vbus; const struct of_device_id *id; struct device_node *node = pdev->dev.of_node; struct property *prop; @@ -1487,6 +1520,52 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + ext_id = ERR_PTR(-ENODEV); + ext_vbus = ERR_PTR(-ENODEV); + if (of_property_read_bool(node, "extcon")) { + + /* Each one of them is not mandatory */ + ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) + return PTR_ERR(ext_vbus); + + ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1); + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) + return PTR_ERR(ext_id); + } + + if (!IS_ERR(ext_vbus)) { + motg->vbus.nb.notifier_call = msm_otg_vbus_notifier; + ret = extcon_register_interest(&motg->vbus.conn, ext_vbus->name, + "USB", &motg->vbus.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register VBUS notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_vbus, "USB"); + if (ret) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } + + if (!IS_ERR(ext_id)) { + motg->id.nb.notifier_call = msm_otg_id_notifier; + ret = extcon_register_interest(&motg->id.conn, ext_id->name, + "USB-HOST", &motg->id.nb); + if (ret < 0) { + dev_err(&pdev->dev, "register ID notifier failed\n"); + return ret; + } + + ret = extcon_get_cable_state(ext_id, "USB-HOST"); + if (ret) + clear_bit(ID, &motg->inputs); + else + set_bit(ID, &motg->inputs); + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; @@ -1700,6 +1779,11 @@ static int msm_otg_remove(struct platform_device *pdev) if (phy->otg->host || phy->otg->gadget) return -EBUSY; + if (motg->id.conn.edev) + extcon_unregister_interest(&motg->id.conn); + if (motg->vbus.conn.edev) + extcon_unregister_interest(&motg->vbus.conn); + msm_otg_debugfs_cleanup(); cancel_delayed_work_sync(&motg->chg_work); cancel_work_sync(&motg->sm_work); diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 7dbecf9a4656..c4d956e50d09 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -18,6 +18,7 @@ #ifndef __ASM_ARCH_MSM_HSUSB_H #define __ASM_ARCH_MSM_HSUSB_H +#include #include #include #include @@ -119,6 +120,17 @@ struct msm_otg_platform_data { void (*setup_gpio)(enum usb_otg_state state); }; +/** + * struct msm_usb_cable - structure for exteternal connector cable + * state tracking + * @nb: hold event notification callback + * @conn: used for notification registration + */ +struct msm_usb_cable { + struct notifier_block nb; + struct extcon_specific_cable_nb conn; +}; + /** * struct msm_otg: OTG driver data. Shared by HCD and DCD. * @otg: USB OTG Transceiver structure. @@ -138,6 +150,8 @@ struct msm_otg_platform_data { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @vbus: VBUS signal state trakining, using extcon framework + * @id: ID signal state trakining, using extcon framework */ struct msm_otg { struct usb_phy phy; @@ -166,6 +180,9 @@ struct msm_otg { struct reset_control *phy_rst; struct reset_control *link_rst; int vdd_levels[3]; + + struct msm_usb_cable vbus; + struct msm_usb_cable id; }; #endif -- cgit v1.2.3 From 44e42ae3a398b559c768b9b3c324d72b0b0b4479 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 11:34:33 +0300 Subject: usb: phy: msm: Manual PHY and LINK controller VBUS change notification VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller must see VBUS in order to pull-up DP when setting RS bit. Henc configure USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line. Cc: Vamsi Krishna Cc: Mayank Rana Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 4 ++++ drivers/usb/phy/phy-msm-usb.c | 26 ++++++++++++++++++++++ include/linux/usb/msm_hsusb.h | 5 +++++ include/linux/usb/msm_hsusb_hw.h | 9 ++++++++ 4 files changed, 44 insertions(+) (limited to 'include') diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index f26bcfac3d8f..bd8d9e753029 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -69,6 +69,10 @@ Optional properties: (no, min, max) where each value represents either a voltage in microvolts or a value corresponding to voltage corner. +- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy + and controller driver therefore enables pull-up explicitly + before starting controller using usbcmd run/stop bit. + - extcon: phandles to external connector devices. First phandle should point to external connector, which provide "USB" cable events, the second should point to external connector diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index ad66c67ce9a5..00c49bb1bd29 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -240,8 +240,14 @@ static void ulpi_init(struct msm_otg *motg) static int msm_phy_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); int val; + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A)); + } + /* * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. @@ -422,6 +428,24 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GENCONFIG_2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + } + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1520,6 +1544,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(node, "extcon")) { diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index c4d956e50d09..e55a1504266e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -150,6 +150,9 @@ struct msm_usb_cable { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @manual_pullup: true if VBUS is not routed to USB controller/phy + * and controller driver therefore enables pull-up explicitly before + * starting controller using usbcmd run/stop bit. * @vbus: VBUS signal state trakining, using extcon framework * @id: ID signal state trakining, using extcon framework */ @@ -181,6 +184,8 @@ struct msm_otg { struct reset_control *link_rst; int vdd_levels[3]; + bool manual_pullup; + struct msm_usb_cable vbus; struct msm_usb_cable id; }; diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index a29f6030afb1..e159b39f67a2 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -21,6 +21,8 @@ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) + #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) @@ -30,6 +32,9 @@ #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) +#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7) +#define USBCMD_SESS_VLD_CTRL BIT(25) + #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -50,6 +55,10 @@ #define ULPI_PWR_CLK_MNG_REG 0x88 #define OTG_COMP_DISABLE BIT(0) +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ -- cgit v1.2.3 From b189a2117223edbe40e0a187ae5c606cbdd6447c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2015 14:04:07 +0200 Subject: usb: phy: Remove the phy-rcar-gen2-usb driver The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven Signed-off-by: Felipe Balbi --- drivers/usb/phy/Kconfig | 13 -- drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-rcar-gen2-usb.c | 246 ------------------------ include/linux/platform_data/usb-rcar-gen2-phy.h | 22 --- 4 files changed, 282 deletions(-) delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h (limited to 'include') diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 811f331892d7..173a5b5d8bc1 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -187,19 +187,6 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called phy-rcar-usb. -config USB_RCAR_GEN2_PHY - tristate "Renesas R-Car Gen2 USB PHY support" - depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST - select USB_PHY - help - Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver. - It is typically used to control internal USB PHY for USBHS, - and to configure shared USB channels 0 and 2. - This driver supports R8A7790 and R8A7791. - - To compile this driver as a module, choose M here: the - module will be called phy-rcar-gen2-usb. - config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 75f2bba58c84..e36ab1d46d8b 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o -obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c deleted file mode 100644 index f81800b6562a..000000000000 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Renesas R-Car Gen2 USB phy driver - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -struct rcar_gen2_usb_phy_priv { - struct usb_phy phy; - void __iomem *base; - struct clk *clk; - spinlock_t lock; - int usecount; - u32 ugctrl2; -}; - -#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy) - -/* Low Power Status register */ -#define USBHS_LPSTS_REG 0x02 -#define USBHS_LPSTS_SUSPM (1 << 14) - -/* USB General control register */ -#define USBHS_UGCTRL_REG 0x80 -#define USBHS_UGCTRL_CONNECT (1 << 2) -#define USBHS_UGCTRL_PLLRESET (1 << 0) - -/* USB General control register 2 */ -#define USBHS_UGCTRL2_REG 0x84 -#define USBHS_UGCTRL2_USB0_PCI (1 << 4) -#define USBHS_UGCTRL2_USB0_HS (3 << 4) -#define USBHS_UGCTRL2_USB2_PCI (0 << 31) -#define USBHS_UGCTRL2_USB2_SS (1 << 31) - -/* USB General status register */ -#define USBHS_UGSTS_REG 0x88 -#define USBHS_UGSTS_LOCK (1 << 8) - -/* Enable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) -{ - u32 val; - int i; - - /* USBHS PHY power on */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val |= USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - for (i = 0; i < 20; i++) { - val = ioread32(base + USBHS_UGSTS_REG); - if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; - } - udelay(1); - } - - /* Timed out waiting for the PLL lock */ - return -ETIMEDOUT; -} - -/* Disable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_disable(void __iomem *base) -{ - u32 val; - - /* USBHS PHY power off */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val &= ~USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; -} - -/* Setup USB channels */ -static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) -{ - u32 val; - - clk_prepare_enable(priv->clk); - - /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base + USBHS_UGCTRL2_REG); - val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); - val |= priv->ugctrl2; - iowrite32(val, priv->base + USBHS_UGCTRL2_REG); -} - -/* Shutdown USB channels */ -static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv) -{ - __rcar_gen2_usbhs_phy_disable(priv->base); - clk_disable_unprepare(priv->clk); -} - -static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - int retval; - - spin_lock_irqsave(&priv->lock, flags); - retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) : - __rcar_gen2_usbhs_phy_enable(priv->base); - spin_unlock_irqrestore(&priv->lock, flags); - return retval; -} - -static int rcar_gen2_usb_phy_init(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - /* - * Enable the clock and setup USB channels - * if it's the first user - */ - if (!priv->usecount++) - __rcar_gen2_usb_phy_init(priv); - spin_unlock_irqrestore(&priv->lock, flags); - return 0; -} - -static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!priv->usecount) { - dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n"); - goto out; - } - - /* Disable everything if it's the last user */ - if (!--priv->usecount) - __rcar_gen2_usb_phy_shutdown(priv); -out: - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct rcar_gen2_phy_platform_data *pdata; - struct rcar_gen2_usb_phy_priv *priv; - struct resource *res; - void __iomem *base; - struct clk *clk; - int retval; - - pdata = dev_get_platdata(dev); - if (!pdata) { - dev_err(dev, "No platform data\n"); - return -EINVAL; - } - - clk = devm_clk_get(dev, "usbhs"); - if (IS_ERR(clk)) { - dev_err(dev, "Can't get the clock\n"); - return PTR_ERR(clk); - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - spin_lock_init(&priv->lock); - priv->clk = clk; - priv->base = base; - priv->ugctrl2 = pdata->chan0_pci ? - USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS; - priv->ugctrl2 |= pdata->chan2_pci ? - USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS; - priv->phy.dev = dev; - priv->phy.label = dev_name(dev); - priv->phy.init = rcar_gen2_usb_phy_init; - priv->phy.shutdown = rcar_gen2_usb_phy_shutdown; - priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend; - - retval = usb_add_phy_dev(&priv->phy); - if (retval < 0) { - dev_err(dev, "Failed to add USB phy\n"); - return retval; - } - - platform_set_drvdata(pdev, priv); - - return retval; -} - -static int rcar_gen2_usb_phy_remove(struct platform_device *pdev) -{ - struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev); - - usb_remove_phy(&priv->phy); - - return 0; -} - -static struct platform_driver rcar_gen2_usb_phy_driver = { - .driver = { - .name = "usb_phy_rcar_gen2", - }, - .probe = rcar_gen2_usb_phy_probe, - .remove = rcar_gen2_usb_phy_remove, -}; - -module_platform_driver(rcar_gen2_usb_phy_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy"); -MODULE_AUTHOR("Valentine Barshak "); diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h deleted file mode 100644 index dd3ba46c0d90..000000000000 --- a/include/linux/platform_data/usb-rcar-gen2-phy.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __USB_RCAR_GEN2_PHY_H -#define __USB_RCAR_GEN2_PHY_H - -#include - -struct rcar_gen2_phy_platform_data { - /* USB channel 0 configuration */ - bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */ - /* USB channel 2 configuration */ - bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */ -}; - -#endif -- cgit v1.2.3 From a5e7e07c264bb76d0b7c782766989c491833de05 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Wed, 29 Apr 2015 17:43:20 +0800 Subject: ALSA: hda - allow a codec to control the link power A flag "link_power_control" is added to indicate whether a codec needs to control the link power. And a new bus ops link_power() is defined for the codec to request to enable/disable the link power. Signed-off-by: Mengdong Lin Signed-off-by: Takashi Iwai --- include/sound/hdaudio.h | 4 ++++ sound/hda/hdac_device.c | 15 +++++++++++++++ sound/pci/hda/hda_codec.c | 4 ++++ 3 files changed, 23 insertions(+) (limited to 'include') diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 6a2e030c836c..b97c59eab7ab 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -74,6 +74,7 @@ struct hdac_device { /* misc flags */ atomic_t in_pm; /* suspend/resume being performed */ + bool link_power_control:1; /* sysfs */ struct hdac_widget_tree *widgets; @@ -184,6 +185,8 @@ struct hdac_bus_ops { /* get a response from the last command */ int (*get_response)(struct hdac_bus *bus, unsigned int addr, unsigned int *res); + /* control the link power */ + int (*link_power)(struct hdac_bus *bus, bool enable); }; /* @@ -311,6 +314,7 @@ static inline void snd_hdac_codec_link_down(struct hdac_device *codec) int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val); int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr, unsigned int *res); +int snd_hdac_link_power(struct hdac_device *codec, bool enable); bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset); void snd_hdac_bus_stop_chip(struct hdac_bus *bus); diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index 55c7d086b9dd..cdee7103f649 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -552,6 +552,21 @@ void snd_hdac_power_down_pm(struct hdac_device *codec) EXPORT_SYMBOL_GPL(snd_hdac_power_down_pm); #endif +/* + * Enable/disable the link power for a codec. + */ +int snd_hdac_link_power(struct hdac_device *codec, bool enable) +{ + if (!codec->link_power_control) + return 0; + + if (codec->bus->ops->link_power) + return codec->bus->ops->link_power(codec->bus, enable); + else + return -EINVAL; +} +EXPORT_SYMBOL_GPL(snd_hdac_link_power); + /* codec vendor labels */ struct hda_vendor_id { unsigned int id; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 2d8883fbde2b..a85242f7f973 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -857,6 +857,7 @@ void snd_hda_codec_register(struct hda_codec *codec) return; if (device_is_registered(hda_codec_dev(codec))) { snd_hda_register_beep_device(codec); + snd_hdac_link_power(&codec->core, true); pm_runtime_enable(hda_codec_dev(codec)); /* it was powered up in snd_hda_codec_new(), now all done */ snd_hda_power_down(codec); @@ -883,6 +884,7 @@ static int snd_hda_codec_dev_free(struct snd_device *device) struct hda_codec *codec = device->device_data; codec->in_freeing = 1; + snd_hdac_link_power(&codec->core, false); snd_hdac_device_unregister(&codec->core); put_device(hda_codec_dev(codec)); return 0; @@ -3102,6 +3104,7 @@ static int hda_codec_runtime_suspend(struct device *dev) if (codec_has_clkstop(codec) && codec_has_epss(codec) && (state & AC_PWRST_CLK_STOP_OK)) snd_hdac_codec_link_down(&codec->core); + snd_hdac_link_power(&codec->core, false); return 0; } @@ -3109,6 +3112,7 @@ static int hda_codec_runtime_resume(struct device *dev) { struct hda_codec *codec = dev_to_hda_codec(dev); + snd_hdac_link_power(&codec->core, true); snd_hdac_codec_link_up(&codec->core); hda_call_codec_resume(codec); pm_runtime_mark_last_busy(dev); -- cgit v1.2.3 From f1ec7187167ce225d2744b20a90afef5f10fd6cd Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 29 Apr 2015 16:02:30 -0500 Subject: libfdt: add fdt type definitions In preparation for libfdt/dtc update, add the new fdt specific types. Signed-off-by: Rob Herring Cc: Russell King Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org --- arch/arm/boot/compressed/libfdt_env.h | 4 ++++ arch/powerpc/boot/libfdt_env.h | 4 ++++ arch/powerpc/boot/of.h | 2 ++ include/linux/libfdt_env.h | 4 ++++ 4 files changed, 14 insertions(+) (limited to 'include') diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h index 1f4e71876b00..17ae0f3efac8 100644 --- a/arch/arm/boot/compressed/libfdt_env.h +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -5,6 +5,10 @@ #include #include +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + #define fdt16_to_cpu(x) be16_to_cpu(x) #define cpu_to_fdt16(x) cpu_to_be16(x) #define fdt32_to_cpu(x) be32_to_cpu(x) diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h index 8dcd744e5728..7e3789ea396b 100644 --- a/arch/powerpc/boot/libfdt_env.h +++ b/arch/powerpc/boot/libfdt_env.h @@ -10,6 +10,10 @@ typedef u32 uint32_t; typedef u64 uint64_t; typedef unsigned long uintptr_t; +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + #define fdt16_to_cpu(x) be16_to_cpu(x) #define cpu_to_fdt16(x) cpu_to_be16(x) #define fdt32_to_cpu(x) be32_to_cpu(x) diff --git a/arch/powerpc/boot/of.h b/arch/powerpc/boot/of.h index 5603320dce07..53f8f27f94e4 100644 --- a/arch/powerpc/boot/of.h +++ b/arch/powerpc/boot/of.h @@ -21,7 +21,9 @@ int of_setprop(const void *phandle, const char *name, const void *buf, /* Console functions */ void of_console_init(void); +typedef u16 __be16; typedef u32 __be32; +typedef u64 __be64; #ifdef __LITTLE_ENDIAN__ #define cpu_to_be16(x) swab16(x) diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h index 01508c7b8c81..2a663c6bb428 100644 --- a/include/linux/libfdt_env.h +++ b/include/linux/libfdt_env.h @@ -5,6 +5,10 @@ #include +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + #define fdt32_to_cpu(x) be32_to_cpu(x) #define cpu_to_fdt32(x) cpu_to_be32(x) #define fdt64_to_cpu(x) be64_to_cpu(x) -- cgit v1.2.3 From 042f7df15a4fff8eec42873f755aea848dcdedd1 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 30 Apr 2015 17:16:12 +0800 Subject: workqueue: Allow modifying low level unbound workqueue cpumask Allow to modify the low-level unbound workqueues cpumask through sysfs. This is performed by traversing the entire workqueue list and calling apply_wqattrs_prepare() on the unbound workqueues with the new low level mask. Only after all the preparation are done, we commit them all together. Ordered workqueues are ignored from the low level unbound workqueue cpumask, it will be handled in near future. All the (default & per-node) pwqs are mandatorily controlled by the low level cpumask. If the user configured cpumask doesn't overlap with the low level cpumask, the low level cpumask will be used for the wq instead. The comment of wq_calc_node_cpumask() is updated and explicitly requires that its first argument should be the attrs of the default pwq. The default wq_unbound_cpumask is cpu_possible_mask. The workqueue subsystem doesn't know its best default value, let the system manager or the other subsystem set it when needed. Changed from V8: merge the calculating code for the attrs of the default pwq together. minor change the code&comments for saving the user configured attrs. remove unnecessary list_del(). minor update the comment of wq_calc_node_cpumask(). update the comment of workqueue_set_unbound_cpumask(); Cc: Christoph Lameter Cc: Kevin Hilman Cc: Lai Jiangshan Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Tejun Heo Cc: Viresh Kumar Cc: Frederic Weisbecker Original-patch-by: Frederic Weisbecker Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo --- include/linux/workqueue.h | 1 + kernel/workqueue.c | 127 ++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 119 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index deee212af8e0..4618dd672d1b 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -424,6 +424,7 @@ struct workqueue_attrs *alloc_workqueue_attrs(gfp_t gfp_mask); void free_workqueue_attrs(struct workqueue_attrs *attrs); int apply_workqueue_attrs(struct workqueue_struct *wq, const struct workqueue_attrs *attrs); +int workqueue_set_unbound_cpumask(cpumask_var_t cpumask); extern bool queue_work_on(int cpu, struct workqueue_struct *wq, struct work_struct *work); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 9be75e2a4da6..a3915abc1983 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -299,7 +299,7 @@ static DEFINE_SPINLOCK(wq_mayday_lock); /* protects wq->maydays list */ static LIST_HEAD(workqueues); /* PR: list of all workqueues */ static bool workqueue_freezing; /* PL: have wqs started freezing? */ -static cpumask_var_t wq_unbound_cpumask; +static cpumask_var_t wq_unbound_cpumask; /* PL: low level cpumask for all unbound wqs */ /* the per-cpu worker pools */ static DEFINE_PER_CPU_SHARED_ALIGNED(struct worker_pool [NR_STD_WORKER_POOLS], @@ -3429,7 +3429,7 @@ static struct pool_workqueue *alloc_unbound_pwq(struct workqueue_struct *wq, /** * wq_calc_node_mask - calculate a wq_attrs' cpumask for the specified node - * @attrs: the wq_attrs of interest + * @attrs: the wq_attrs of the default pwq of the target workqueue * @node: the target NUMA node * @cpu_going_down: if >= 0, the CPU to consider as offline * @cpumask: outarg, the resulting cpumask @@ -3493,6 +3493,7 @@ static struct pool_workqueue *numa_pwq_tbl_install(struct workqueue_struct *wq, struct apply_wqattrs_ctx { struct workqueue_struct *wq; /* target workqueue */ struct workqueue_attrs *attrs; /* attrs to apply */ + struct list_head list; /* queued for batching commit */ struct pool_workqueue *dfl_pwq; struct pool_workqueue *pwq_tbl[]; }; @@ -3532,9 +3533,15 @@ apply_wqattrs_prepare(struct workqueue_struct *wq, if (!ctx || !new_attrs || !tmp_attrs) goto out_free; - /* make a copy of @attrs and sanitize it */ + /* + * Calculate the attrs of the default pwq. + * If the user configured cpumask doesn't overlap with the + * wq_unbound_cpumask, we fallback to the wq_unbound_cpumask. + */ copy_workqueue_attrs(new_attrs, attrs); cpumask_and(new_attrs->cpumask, new_attrs->cpumask, wq_unbound_cpumask); + if (unlikely(cpumask_empty(new_attrs->cpumask))) + cpumask_copy(new_attrs->cpumask, wq_unbound_cpumask); /* * We may create multiple pwqs with differing cpumasks. Make a @@ -3553,7 +3560,7 @@ apply_wqattrs_prepare(struct workqueue_struct *wq, goto out_free; for_each_node(node) { - if (wq_calc_node_cpumask(attrs, node, -1, tmp_attrs->cpumask)) { + if (wq_calc_node_cpumask(new_attrs, node, -1, tmp_attrs->cpumask)) { ctx->pwq_tbl[node] = alloc_unbound_pwq(wq, tmp_attrs); if (!ctx->pwq_tbl[node]) goto out_free; @@ -3563,7 +3570,11 @@ apply_wqattrs_prepare(struct workqueue_struct *wq, } } + /* save the user configured attrs and sanitize it. */ + copy_workqueue_attrs(new_attrs, attrs); + cpumask_and(new_attrs->cpumask, new_attrs->cpumask, cpu_possible_mask); ctx->attrs = new_attrs; + ctx->wq = wq; free_workqueue_attrs(tmp_attrs); return ctx; @@ -3704,11 +3715,11 @@ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu, /* * Let's determine what needs to be done. If the target cpumask is - * different from wq's, we need to compare it to @pwq's and create - * a new one if they don't match. If the target cpumask equals - * wq's, the default pwq should be used. + * different from the default pwq's, we need to compare it to @pwq's + * and create a new one if they don't match. If the target cpumask + * equals the default pwq's, the default pwq should be used. */ - if (wq_calc_node_cpumask(wq->unbound_attrs, node, cpu_off, cpumask)) { + if (wq_calc_node_cpumask(wq->dfl_pwq->pool->attrs, node, cpu_off, cpumask)) { if (cpumask_equal(cpumask, pwq->pool->attrs->cpumask)) goto out_unlock; } else { @@ -4731,6 +4742,84 @@ out_unlock: } #endif /* CONFIG_FREEZER */ +static int workqueue_apply_unbound_cpumask(void) +{ + LIST_HEAD(ctxs); + int ret = 0; + struct workqueue_struct *wq; + struct apply_wqattrs_ctx *ctx, *n; + + lockdep_assert_held(&wq_pool_mutex); + + list_for_each_entry(wq, &workqueues, list) { + if (!(wq->flags & WQ_UNBOUND)) + continue; + /* creating multiple pwqs breaks ordering guarantee */ + if (wq->flags & __WQ_ORDERED) + continue; + + ctx = apply_wqattrs_prepare(wq, wq->unbound_attrs); + if (!ctx) { + ret = -ENOMEM; + break; + } + + list_add_tail(&ctx->list, &ctxs); + } + + list_for_each_entry_safe(ctx, n, &ctxs, list) { + if (!ret) + apply_wqattrs_commit(ctx); + apply_wqattrs_cleanup(ctx); + } + + return ret; +} + +/** + * workqueue_set_unbound_cpumask - Set the low-level unbound cpumask + * @cpumask: the cpumask to set + * + * The low-level workqueues cpumask is a global cpumask that limits + * the affinity of all unbound workqueues. This function check the @cpumask + * and apply it to all unbound workqueues and updates all pwqs of them. + * + * Retun: 0 - Success + * -EINVAL - Invalid @cpumask + * -ENOMEM - Failed to allocate memory for attrs or pwqs. + */ +int workqueue_set_unbound_cpumask(cpumask_var_t cpumask) +{ + int ret = -EINVAL; + cpumask_var_t saved_cpumask; + + if (!zalloc_cpumask_var(&saved_cpumask, GFP_KERNEL)) + return -ENOMEM; + + get_online_cpus(); + cpumask_and(cpumask, cpumask, cpu_possible_mask); + if (!cpumask_empty(cpumask)) { + mutex_lock(&wq_pool_mutex); + + /* save the old wq_unbound_cpumask. */ + cpumask_copy(saved_cpumask, wq_unbound_cpumask); + + /* update wq_unbound_cpumask at first and apply it to wqs. */ + cpumask_copy(wq_unbound_cpumask, cpumask); + ret = workqueue_apply_unbound_cpumask(); + + /* restore the wq_unbound_cpumask when failed. */ + if (ret < 0) + cpumask_copy(wq_unbound_cpumask, saved_cpumask); + + mutex_unlock(&wq_pool_mutex); + } + put_online_cpus(); + + free_cpumask_var(saved_cpumask); + return ret; +} + #ifdef CONFIG_SYSFS /* * Workqueues with WQ_SYSFS flag set is visible to userland via @@ -4952,14 +5041,34 @@ static ssize_t wq_unbound_cpumask_show(struct device *dev, { int written; + mutex_lock(&wq_pool_mutex); written = scnprintf(buf, PAGE_SIZE, "%*pb\n", cpumask_pr_args(wq_unbound_cpumask)); + mutex_unlock(&wq_pool_mutex); return written; } +static ssize_t wq_unbound_cpumask_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + cpumask_var_t cpumask; + int ret; + + if (!zalloc_cpumask_var(&cpumask, GFP_KERNEL)) + return -ENOMEM; + + ret = cpumask_parse(buf, cpumask); + if (!ret) + ret = workqueue_set_unbound_cpumask(cpumask); + + free_cpumask_var(cpumask); + return ret ? ret : count; +} + static struct device_attribute wq_sysfs_cpumask_attr = - __ATTR(cpumask, 0444, wq_unbound_cpumask_show, NULL); + __ATTR(cpumask, 0644, wq_unbound_cpumask_show, + wq_unbound_cpumask_store); static int __init wq_sysfs_init(void) { -- cgit v1.2.3 From ebcff5fce6b189306756b0cb06779e15f1c93848 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 9 Apr 2015 04:01:33 -0300 Subject: [media] v4l2: replace enum_mbus_fmt by enum_mbus_code Replace all calls to the enum_mbus_fmt video op by the pad enum_mbus_code op and remove the duplicate video op. Signed-off-by: Hans Verkuil Acked-by: Guennadi Liakhovetski Acked-by: Scott Jiang Cc: Jonathan Corbet Cc: Kamil Debski Acked-by: Prabhakar Lad Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7170.c | 15 ++++++++---- drivers/media/i2c/adv7175.c | 15 ++++++++---- drivers/media/i2c/adv7183.c | 15 ++++++++---- drivers/media/i2c/adv7842.c | 11 +++++---- drivers/media/i2c/ak881x.c | 15 ++++++++---- drivers/media/i2c/ml86v7667.c | 15 ++++++++---- drivers/media/i2c/mt9v011.c | 15 ++++++++---- drivers/media/i2c/ov7670.c | 11 +++++---- drivers/media/i2c/soc_camera/imx074.c | 16 +++++++++---- drivers/media/i2c/soc_camera/mt9m001.c | 15 ++++++++---- drivers/media/i2c/soc_camera/mt9m111.c | 15 ++++++++---- drivers/media/i2c/soc_camera/mt9t031.c | 15 ++++++++---- drivers/media/i2c/soc_camera/mt9t112.c | 15 ++++++++---- drivers/media/i2c/soc_camera/mt9v022.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov2640.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov5642.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov6650.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov772x.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov9640.c | 15 ++++++++---- drivers/media/i2c/soc_camera/ov9740.c | 19 +++++++++------ drivers/media/i2c/soc_camera/rj54n1cb0c.c | 15 ++++++++---- drivers/media/i2c/soc_camera/tw9910.c | 15 ++++++++---- drivers/media/i2c/sr030pc30.c | 16 +++++++++---- drivers/media/i2c/tvp514x.c | 20 ---------------- drivers/media/i2c/tvp5150.c | 15 ++++++++---- drivers/media/i2c/tvp7002.c | 20 ---------------- drivers/media/i2c/vs6624.c | 15 ++++++++---- drivers/media/platform/blackfin/bfin_capture.c | 17 +++++++++----- drivers/media/platform/soc_camera/atmel-isi.c | 19 ++++++++------- drivers/media/platform/soc_camera/mx2_camera.c | 27 ++++++++++++---------- drivers/media/platform/soc_camera/mx3_camera.c | 23 ++++++++++-------- drivers/media/platform/soc_camera/omap1_camera.c | 21 +++++++++-------- drivers/media/platform/soc_camera/pxa_camera.c | 19 ++++++++------- drivers/media/platform/soc_camera/rcar_vin.c | 19 ++++++++------- .../platform/soc_camera/sh_mobile_ceu_camera.c | 19 ++++++++------- drivers/media/platform/soc_camera/soc_camera.c | 15 ++++++++---- .../platform/soc_camera/soc_camera_platform.c | 15 ++++++++---- include/media/v4l2-subdev.h | 4 ---- 38 files changed, 361 insertions(+), 250 deletions(-) (limited to 'include') diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c index 40a1a95c7ce9..cfe963b2fe1c 100644 --- a/drivers/media/i2c/adv7170.c +++ b/drivers/media/i2c/adv7170.c @@ -262,13 +262,14 @@ static int adv7170_s_routing(struct v4l2_subdev *sd, return 0; } -static int adv7170_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int adv7170_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(adv7170_codes)) + if (code->pad || code->index >= ARRAY_SIZE(adv7170_codes)) return -EINVAL; - *code = adv7170_codes[index]; + code->code = adv7170_codes[code->index]; return 0; } @@ -323,11 +324,15 @@ static const struct v4l2_subdev_video_ops adv7170_video_ops = { .s_routing = adv7170_s_routing, .s_mbus_fmt = adv7170_s_fmt, .g_mbus_fmt = adv7170_g_fmt, - .enum_mbus_fmt = adv7170_enum_fmt, +}; + +static const struct v4l2_subdev_pad_ops adv7170_pad_ops = { + .enum_mbus_code = adv7170_enum_mbus_code, }; static const struct v4l2_subdev_ops adv7170_ops = { .video = &adv7170_video_ops, + .pad = &adv7170_pad_ops, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c index d220af579a64..3f40304e856c 100644 --- a/drivers/media/i2c/adv7175.c +++ b/drivers/media/i2c/adv7175.c @@ -300,13 +300,14 @@ static int adv7175_s_routing(struct v4l2_subdev *sd, return 0; } -static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int adv7175_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(adv7175_codes)) + if (code->pad || code->index >= ARRAY_SIZE(adv7175_codes)) return -EINVAL; - *code = adv7175_codes[index]; + code->code = adv7175_codes[code->index]; return 0; } @@ -376,12 +377,16 @@ static const struct v4l2_subdev_video_ops adv7175_video_ops = { .s_routing = adv7175_s_routing, .s_mbus_fmt = adv7175_s_fmt, .g_mbus_fmt = adv7175_g_fmt, - .enum_mbus_fmt = adv7175_enum_fmt, +}; + +static const struct v4l2_subdev_pad_ops adv7175_pad_ops = { + .enum_mbus_code = adv7175_enum_mbus_code, }; static const struct v4l2_subdev_ops adv7175_ops = { .core = &adv7175_core_ops, .video = &adv7175_video_ops, + .pad = &adv7175_pad_ops, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/i2c/adv7183.c b/drivers/media/i2c/adv7183.c index 28940cc3a766..a0bcfefc28fc 100644 --- a/drivers/media/i2c/adv7183.c +++ b/drivers/media/i2c/adv7183.c @@ -420,13 +420,14 @@ static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status) return 0; } -static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) +static int adv7183_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index > 0) + if (code->pad || code->index > 0) return -EINVAL; - *code = MEDIA_BUS_FMT_UYVY8_2X8; + code->code = MEDIA_BUS_FMT_UYVY8_2X8; return 0; } @@ -514,16 +515,20 @@ static const struct v4l2_subdev_video_ops adv7183_video_ops = { .s_routing = adv7183_s_routing, .querystd = adv7183_querystd, .g_input_status = adv7183_g_input_status, - .enum_mbus_fmt = adv7183_enum_mbus_fmt, .try_mbus_fmt = adv7183_try_mbus_fmt, .s_mbus_fmt = adv7183_s_mbus_fmt, .g_mbus_fmt = adv7183_g_mbus_fmt, .s_stream = adv7183_s_stream, }; +static const struct v4l2_subdev_pad_ops adv7183_pad_ops = { + .enum_mbus_code = adv7183_enum_mbus_code, +}; + static const struct v4l2_subdev_ops adv7183_ops = { .core = &adv7183_core_ops, .video = &adv7183_video_ops, + .pad = &adv7183_pad_ops, }; static int adv7183_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index b5a37fe10a6a..644e910f9d8a 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -1867,13 +1867,14 @@ static int adv7842_s_routing(struct v4l2_subdev *sd, return 0; } -static int adv7842_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int adv7842_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index) + if (code->pad || code->index) return -EINVAL; /* Good enough for now */ - *code = MEDIA_BUS_FMT_FIXED; + code->code = MEDIA_BUS_FMT_FIXED; return 0; } @@ -2809,7 +2810,6 @@ static const struct v4l2_subdev_video_ops adv7842_video_ops = { .s_dv_timings = adv7842_s_dv_timings, .g_dv_timings = adv7842_g_dv_timings, .query_dv_timings = adv7842_query_dv_timings, - .enum_mbus_fmt = adv7842_enum_mbus_fmt, .g_mbus_fmt = adv7842_g_mbus_fmt, .try_mbus_fmt = adv7842_g_mbus_fmt, .s_mbus_fmt = adv7842_g_mbus_fmt, @@ -2820,6 +2820,7 @@ static const struct v4l2_subdev_pad_ops adv7842_pad_ops = { .set_edid = adv7842_set_edid, .enum_dv_timings = adv7842_enum_dv_timings, .dv_timings_cap = adv7842_dv_timings_cap, + .enum_mbus_code = adv7842_enum_mbus_code, }; static const struct v4l2_subdev_ops adv7842_ops = { diff --git a/drivers/media/i2c/ak881x.c b/drivers/media/i2c/ak881x.c index 69aeaf397624..4428fb95d033 100644 --- a/drivers/media/i2c/ak881x.c +++ b/drivers/media/i2c/ak881x.c @@ -118,13 +118,14 @@ static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, return ak881x_try_g_mbus_fmt(sd, mf); } -static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ak881x_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index) + if (code->pad || code->index) return -EINVAL; - *code = MEDIA_BUS_FMT_YUYV8_2X8; + code->code = MEDIA_BUS_FMT_YUYV8_2X8; return 0; } @@ -215,14 +216,18 @@ static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { .g_mbus_fmt = ak881x_try_g_mbus_fmt, .try_mbus_fmt = ak881x_try_g_mbus_fmt, .cropcap = ak881x_cropcap, - .enum_mbus_fmt = ak881x_enum_mbus_fmt, .s_std_output = ak881x_s_std_output, .s_stream = ak881x_s_stream, }; +static const struct v4l2_subdev_pad_ops ak881x_subdev_pad_ops = { + .enum_mbus_code = ak881x_enum_mbus_code, +}; + static struct v4l2_subdev_ops ak881x_subdev_ops = { .core = &ak881x_subdev_core_ops, .video = &ak881x_subdev_video_ops, + .pad = &ak881x_subdev_pad_ops, }; static int ak881x_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c index d7307862c2c5..e7b220239d30 100644 --- a/drivers/media/i2c/ml86v7667.c +++ b/drivers/media/i2c/ml86v7667.c @@ -191,13 +191,14 @@ static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status) return 0; } -static int ml86v7667_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index > 0) + if (code->pad || code->index > 0) return -EINVAL; - *code = MEDIA_BUS_FMT_YUYV8_2X8; + code->code = MEDIA_BUS_FMT_YUYV8_2X8; return 0; } @@ -279,13 +280,16 @@ static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { .s_std = ml86v7667_s_std, .querystd = ml86v7667_querystd, .g_input_status = ml86v7667_g_input_status, - .enum_mbus_fmt = ml86v7667_enum_mbus_fmt, .try_mbus_fmt = ml86v7667_mbus_fmt, .g_mbus_fmt = ml86v7667_mbus_fmt, .s_mbus_fmt = ml86v7667_mbus_fmt, .g_mbus_config = ml86v7667_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = { + .enum_mbus_code = ml86v7667_enum_mbus_code, +}; + static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ml86v7667_g_register, @@ -296,6 +300,7 @@ static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { static struct v4l2_subdev_ops ml86v7667_subdev_ops = { .core = &ml86v7667_subdev_core_ops, .video = &ml86v7667_subdev_video_ops, + .pad = &ml86v7667_subdev_pad_ops, }; static int ml86v7667_init(struct ml86v7667_priv *priv) diff --git a/drivers/media/i2c/mt9v011.c b/drivers/media/i2c/mt9v011.c index a10f7f8f0558..6fae8fce4617 100644 --- a/drivers/media/i2c/mt9v011.c +++ b/drivers/media/i2c/mt9v011.c @@ -324,13 +324,14 @@ static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) return 0; } -static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) +static int mt9v011_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index > 0) + if (code->pad || code->index > 0) return -EINVAL; - *code = MEDIA_BUS_FMT_SGRBG8_1X8; + code->code = MEDIA_BUS_FMT_SGRBG8_1X8; return 0; } @@ -469,16 +470,20 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = { }; static const struct v4l2_subdev_video_ops mt9v011_video_ops = { - .enum_mbus_fmt = mt9v011_enum_mbus_fmt, .try_mbus_fmt = mt9v011_try_mbus_fmt, .s_mbus_fmt = mt9v011_s_mbus_fmt, .g_parm = mt9v011_g_parm, .s_parm = mt9v011_s_parm, }; +static const struct v4l2_subdev_pad_ops mt9v011_pad_ops = { + .enum_mbus_code = mt9v011_enum_mbus_code, +}; + static const struct v4l2_subdev_ops mt9v011_ops = { .core = &mt9v011_core_ops, .video = &mt9v011_video_ops, + .pad = &mt9v011_pad_ops, }; diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index 394f416b3543..5511208c8308 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c @@ -899,13 +899,14 @@ static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop, } -static int ov7670_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) +static int ov7670_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= N_OV7670_FMTS) + if (code->pad || code->index >= N_OV7670_FMTS) return -EINVAL; - *code = ov7670_formats[index].mbus_code; + code->code = ov7670_formats[code->index].mbus_code; return 0; } @@ -1508,7 +1509,6 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = { }; static const struct v4l2_subdev_video_ops ov7670_video_ops = { - .enum_mbus_fmt = ov7670_enum_mbus_fmt, .try_mbus_fmt = ov7670_try_mbus_fmt, .s_mbus_fmt = ov7670_s_mbus_fmt, .s_parm = ov7670_s_parm, @@ -1518,6 +1518,7 @@ static const struct v4l2_subdev_video_ops ov7670_video_ops = { static const struct v4l2_subdev_pad_ops ov7670_pad_ops = { .enum_frame_interval = ov7670_enum_frame_interval, .enum_frame_size = ov7670_enum_frame_size, + .enum_mbus_code = ov7670_enum_mbus_code, }; static const struct v4l2_subdev_ops ov7670_ops = { diff --git a/drivers/media/i2c/soc_camera/imx074.c b/drivers/media/i2c/soc_camera/imx074.c index ec89cfa927a2..7a2d90654fee 100644 --- a/drivers/media/i2c/soc_camera/imx074.c +++ b/drivers/media/i2c/soc_camera/imx074.c @@ -235,13 +235,15 @@ static int imx074_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int imx074_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int imx074_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if ((unsigned int)index >= ARRAY_SIZE(imx074_colour_fmts)) + if (code->pad || + (unsigned int)code->index >= ARRAY_SIZE(imx074_colour_fmts)) return -EINVAL; - *code = imx074_colour_fmts[index].code; + code->code = imx074_colour_fmts[code->index].code; return 0; } @@ -278,7 +280,6 @@ static struct v4l2_subdev_video_ops imx074_subdev_video_ops = { .s_mbus_fmt = imx074_s_fmt, .g_mbus_fmt = imx074_g_fmt, .try_mbus_fmt = imx074_try_fmt, - .enum_mbus_fmt = imx074_enum_fmt, .g_crop = imx074_g_crop, .cropcap = imx074_cropcap, .g_mbus_config = imx074_g_mbus_config, @@ -288,9 +289,14 @@ static struct v4l2_subdev_core_ops imx074_subdev_core_ops = { .s_power = imx074_s_power, }; +static const struct v4l2_subdev_pad_ops imx074_subdev_pad_ops = { + .enum_mbus_code = imx074_enum_mbus_code, +}; + static struct v4l2_subdev_ops imx074_subdev_ops = { .core = &imx074_subdev_core_ops, .video = &imx074_subdev_video_ops, + .pad = &imx074_subdev_pad_ops, }; static int imx074_video_probe(struct i2c_client *client) diff --git a/drivers/media/i2c/soc_camera/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c index 2e9a53502551..ba18e010b9da 100644 --- a/drivers/media/i2c/soc_camera/mt9m001.c +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -562,16 +562,17 @@ static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { .s_power = mt9m001_s_power, }; -static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9m001 *mt9m001 = to_mt9m001(client); - if (index >= mt9m001->num_fmts) + if (code->pad || code->index >= mt9m001->num_fmts) return -EINVAL; - *code = mt9m001->fmts[index].code; + code->code = mt9m001->fmts[code->index].code; return 0; } @@ -617,7 +618,6 @@ static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_crop = mt9m001_s_crop, .g_crop = mt9m001_g_crop, .cropcap = mt9m001_cropcap, - .enum_mbus_fmt = mt9m001_enum_fmt, .g_mbus_config = mt9m001_g_mbus_config, .s_mbus_config = mt9m001_s_mbus_config, }; @@ -626,10 +626,15 @@ static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { .g_skip_top_lines = mt9m001_g_skip_top_lines, }; +static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { + .enum_mbus_code = mt9m001_enum_mbus_code, +}; + static struct v4l2_subdev_ops mt9m001_subdev_ops = { .core = &mt9m001_subdev_core_ops, .video = &mt9m001_subdev_video_ops, .sensor = &mt9m001_subdev_sensor_ops, + .pad = &mt9m001_subdev_pad_ops, }; static int mt9m001_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c index 441e0fda24fe..b7731401dc39 100644 --- a/drivers/media/i2c/soc_camera/mt9m111.c +++ b/drivers/media/i2c/soc_camera/mt9m111.c @@ -839,13 +839,14 @@ static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = { #endif }; -static int mt9m111_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int mt9m111_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(mt9m111_colour_fmts)) + if (code->pad || code->index >= ARRAY_SIZE(mt9m111_colour_fmts)) return -EINVAL; - *code = mt9m111_colour_fmts[index].code; + code->code = mt9m111_colour_fmts[code->index].code; return 0; } @@ -871,13 +872,17 @@ static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { .s_crop = mt9m111_s_crop, .g_crop = mt9m111_g_crop, .cropcap = mt9m111_cropcap, - .enum_mbus_fmt = mt9m111_enum_fmt, .g_mbus_config = mt9m111_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops mt9m111_subdev_pad_ops = { + .enum_mbus_code = mt9m111_enum_mbus_code, +}; + static struct v4l2_subdev_ops mt9m111_subdev_ops = { .core = &mt9m111_subdev_core_ops, .video = &mt9m111_subdev_video_ops, + .pad = &mt9m111_subdev_pad_ops, }; /* diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index 35d9c8d25589..15ac4dc29967 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -672,13 +672,14 @@ static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { #endif }; -static int mt9t031_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int mt9t031_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index) + if (code->pad || code->index) return -EINVAL; - *code = MEDIA_BUS_FMT_SBGGR10_1X10; + code->code = MEDIA_BUS_FMT_SBGGR10_1X10; return 0; } @@ -718,7 +719,6 @@ static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { .s_crop = mt9t031_s_crop, .g_crop = mt9t031_g_crop, .cropcap = mt9t031_cropcap, - .enum_mbus_fmt = mt9t031_enum_fmt, .g_mbus_config = mt9t031_g_mbus_config, .s_mbus_config = mt9t031_s_mbus_config, }; @@ -727,10 +727,15 @@ static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = { .g_skip_top_lines = mt9t031_g_skip_top_lines, }; +static const struct v4l2_subdev_pad_ops mt9t031_subdev_pad_ops = { + .enum_mbus_code = mt9t031_enum_mbus_code, +}; + static struct v4l2_subdev_ops mt9t031_subdev_ops = { .core = &mt9t031_subdev_core_ops, .video = &mt9t031_subdev_video_ops, .sensor = &mt9t031_subdev_sensor_ops, + .pad = &mt9t031_subdev_pad_ops, }; static int mt9t031_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/mt9t112.c b/drivers/media/i2c/soc_camera/mt9t112.c index 64f08365e6b2..8b0cfb7f80b1 100644 --- a/drivers/media/i2c/soc_camera/mt9t112.c +++ b/drivers/media/i2c/soc_camera/mt9t112.c @@ -966,16 +966,17 @@ static int mt9t112_try_fmt(struct v4l2_subdev *sd, return 0; } -static int mt9t112_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int mt9t112_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); - if (index >= priv->num_formats) + if (code->pad || code->index >= priv->num_formats) return -EINVAL; - *code = mt9t112_cfmts[index].code; + code->code = mt9t112_cfmts[code->index].code; return 0; } @@ -1016,17 +1017,21 @@ static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { .cropcap = mt9t112_cropcap, .g_crop = mt9t112_g_crop, .s_crop = mt9t112_s_crop, - .enum_mbus_fmt = mt9t112_enum_fmt, .g_mbus_config = mt9t112_g_mbus_config, .s_mbus_config = mt9t112_s_mbus_config, }; +static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { + .enum_mbus_code = mt9t112_enum_mbus_code, +}; + /************************************************************************ i2c driver ************************************************************************/ static struct v4l2_subdev_ops mt9t112_subdev_ops = { .core = &mt9t112_subdev_core_ops, .video = &mt9t112_subdev_video_ops, + .pad = &mt9t112_subdev_pad_ops, }; static int mt9t112_camera_probe(struct i2c_client *client) diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c index a246d4d64b8b..780c7ae74d69 100644 --- a/drivers/media/i2c/soc_camera/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -758,16 +758,17 @@ static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { .s_power = mt9v022_s_power, }; -static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int mt9v022_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9v022 *mt9v022 = to_mt9v022(client); - if (index >= mt9v022->num_fmts) + if (code->pad || code->index >= mt9v022->num_fmts) return -EINVAL; - *code = mt9v022->fmts[index].code; + code->code = mt9v022->fmts[code->index].code; return 0; } @@ -845,7 +846,6 @@ static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { .s_crop = mt9v022_s_crop, .g_crop = mt9v022_g_crop, .cropcap = mt9v022_cropcap, - .enum_mbus_fmt = mt9v022_enum_fmt, .g_mbus_config = mt9v022_g_mbus_config, .s_mbus_config = mt9v022_s_mbus_config, }; @@ -854,10 +854,15 @@ static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = { .g_skip_top_lines = mt9v022_g_skip_top_lines, }; +static const struct v4l2_subdev_pad_ops mt9v022_subdev_pad_ops = { + .enum_mbus_code = mt9v022_enum_mbus_code, +}; + static struct v4l2_subdev_ops mt9v022_subdev_ops = { .core = &mt9v022_subdev_core_ops, .video = &mt9v022_subdev_video_ops, .sensor = &mt9v022_subdev_sensor_ops, + .pad = &mt9v022_subdev_pad_ops, }; static int mt9v022_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c index e3c907a97765..4327871c8f9f 100644 --- a/drivers/media/i2c/soc_camera/ov2640.c +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -925,13 +925,14 @@ static int ov2640_try_fmt(struct v4l2_subdev *sd, return 0; } -static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov2640_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov2640_codes)) + if (code->pad || code->index >= ARRAY_SIZE(ov2640_codes)) return -EINVAL; - *code = ov2640_codes[index]; + code->code = ov2640_codes[code->index]; return 0; } @@ -1036,13 +1037,17 @@ static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { .try_mbus_fmt = ov2640_try_fmt, .cropcap = ov2640_cropcap, .g_crop = ov2640_g_crop, - .enum_mbus_fmt = ov2640_enum_fmt, .g_mbus_config = ov2640_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = { + .enum_mbus_code = ov2640_enum_mbus_code, +}; + static struct v4l2_subdev_ops ov2640_subdev_ops = { .core = &ov2640_subdev_core_ops, .video = &ov2640_subdev_video_ops, + .pad = &ov2640_subdev_pad_ops, }; /* OF probe functions */ diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c index 93ae031bdafb..fcddd0ded2e3 100644 --- a/drivers/media/i2c/soc_camera/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -839,13 +839,14 @@ static int ov5642_g_fmt(struct v4l2_subdev *sd, return 0; } -static int ov5642_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov5642_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov5642_colour_fmts)) + if (code->pad || code->index >= ARRAY_SIZE(ov5642_colour_fmts)) return -EINVAL; - *code = ov5642_colour_fmts[index].code; + code->code = ov5642_colour_fmts[code->index].code; return 0; } @@ -942,13 +943,16 @@ static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { .s_mbus_fmt = ov5642_s_fmt, .g_mbus_fmt = ov5642_g_fmt, .try_mbus_fmt = ov5642_try_fmt, - .enum_mbus_fmt = ov5642_enum_fmt, .s_crop = ov5642_s_crop, .g_crop = ov5642_g_crop, .cropcap = ov5642_cropcap, .g_mbus_config = ov5642_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops ov5642_subdev_pad_ops = { + .enum_mbus_code = ov5642_enum_mbus_code, +}; + static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { .s_power = ov5642_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -960,6 +964,7 @@ static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { static struct v4l2_subdev_ops ov5642_subdev_ops = { .core = &ov5642_subdev_core_ops, .video = &ov5642_subdev_video_ops, + .pad = &ov5642_subdev_pad_ops, }; static int ov5642_video_probe(struct i2c_client *client) diff --git a/drivers/media/i2c/soc_camera/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c index f4eef2fa6f6f..99e0738fdb38 100644 --- a/drivers/media/i2c/soc_camera/ov6650.c +++ b/drivers/media/i2c/soc_camera/ov6650.c @@ -716,13 +716,14 @@ static int ov6650_try_fmt(struct v4l2_subdev *sd, return 0; } -static int ov6650_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov6650_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov6650_codes)) + if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes)) return -EINVAL; - *code = ov6650_codes[index]; + code->code = ov6650_codes[code->index]; return 0; } @@ -932,7 +933,6 @@ static struct v4l2_subdev_video_ops ov6650_video_ops = { .g_mbus_fmt = ov6650_g_fmt, .s_mbus_fmt = ov6650_s_fmt, .try_mbus_fmt = ov6650_try_fmt, - .enum_mbus_fmt = ov6650_enum_fmt, .cropcap = ov6650_cropcap, .g_crop = ov6650_g_crop, .s_crop = ov6650_s_crop, @@ -942,9 +942,14 @@ static struct v4l2_subdev_video_ops ov6650_video_ops = { .s_mbus_config = ov6650_s_mbus_config, }; +static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { + .enum_mbus_code = ov6650_enum_mbus_code, +}; + static struct v4l2_subdev_ops ov6650_subdev_ops = { .core = &ov6650_core_ops, .video = &ov6650_video_ops, + .pad = &ov6650_pad_ops, }; /* diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c index 8daac88b33fe..e3a31f806636 100644 --- a/drivers/media/i2c/soc_camera/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -989,13 +989,14 @@ static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { .s_power = ov772x_s_power, }; -static int ov772x_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov772x_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov772x_cfmts)) + if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts)) return -EINVAL; - *code = ov772x_cfmts[index].code; + code->code = ov772x_cfmts[code->index].code; return 0; } @@ -1021,13 +1022,17 @@ static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { .try_mbus_fmt = ov772x_try_fmt, .cropcap = ov772x_cropcap, .g_crop = ov772x_g_crop, - .enum_mbus_fmt = ov772x_enum_fmt, .g_mbus_config = ov772x_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = { + .enum_mbus_code = ov772x_enum_mbus_code, +}; + static struct v4l2_subdev_ops ov772x_subdev_ops = { .core = &ov772x_subdev_core_ops, .video = &ov772x_subdev_video_ops, + .pad = &ov772x_subdev_pad_ops, }; /* diff --git a/drivers/media/i2c/soc_camera/ov9640.c b/drivers/media/i2c/soc_camera/ov9640.c index aa93d2e88572..899b4d9352fe 100644 --- a/drivers/media/i2c/soc_camera/ov9640.c +++ b/drivers/media/i2c/soc_camera/ov9640.c @@ -540,13 +540,14 @@ static int ov9640_try_fmt(struct v4l2_subdev *sd, return 0; } -static int ov9640_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov9640_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov9640_codes)) + if (code->pad || code->index >= ARRAY_SIZE(ov9640_codes)) return -EINVAL; - *code = ov9640_codes[index]; + code->code = ov9640_codes[code->index]; return 0; } @@ -658,15 +659,19 @@ static struct v4l2_subdev_video_ops ov9640_video_ops = { .s_stream = ov9640_s_stream, .s_mbus_fmt = ov9640_s_fmt, .try_mbus_fmt = ov9640_try_fmt, - .enum_mbus_fmt = ov9640_enum_fmt, .cropcap = ov9640_cropcap, .g_crop = ov9640_g_crop, .g_mbus_config = ov9640_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops ov9640_pad_ops = { + .enum_mbus_code = ov9640_enum_mbus_code, +}; + static struct v4l2_subdev_ops ov9640_subdev_ops = { .core = &ov9640_core_ops, .video = &ov9640_video_ops, + .pad = &ov9640_pad_ops, }; /* diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c index 841dc55457cf..5d9b2492b7d2 100644 --- a/drivers/media/i2c/soc_camera/ov9740.c +++ b/drivers/media/i2c/soc_camera/ov9740.c @@ -716,13 +716,14 @@ static int ov9740_try_fmt(struct v4l2_subdev *sd, return 0; } -static int ov9740_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int ov9740_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(ov9740_codes)) + if (code->pad || code->index >= ARRAY_SIZE(ov9740_codes)) return -EINVAL; - *code = ov9740_codes[index]; + code->code = ov9740_codes[code->index]; return 0; } @@ -906,7 +907,6 @@ static struct v4l2_subdev_video_ops ov9740_video_ops = { .s_stream = ov9740_s_stream, .s_mbus_fmt = ov9740_s_fmt, .try_mbus_fmt = ov9740_try_fmt, - .enum_mbus_fmt = ov9740_enum_fmt, .cropcap = ov9740_cropcap, .g_crop = ov9740_g_crop, .g_mbus_config = ov9740_g_mbus_config, @@ -920,9 +920,14 @@ static struct v4l2_subdev_core_ops ov9740_core_ops = { #endif }; +static const struct v4l2_subdev_pad_ops ov9740_pad_ops = { + .enum_mbus_code = ov9740_enum_mbus_code, +}; + static struct v4l2_subdev_ops ov9740_subdev_ops = { - .core = &ov9740_core_ops, - .video = &ov9740_video_ops, + .core = &ov9740_core_ops, + .video = &ov9740_video_ops, + .pad = &ov9740_pad_ops, }; static const struct v4l2_ctrl_ops ov9740_ctrl_ops = { diff --git a/drivers/media/i2c/soc_camera/rj54n1cb0c.c b/drivers/media/i2c/soc_camera/rj54n1cb0c.c index 1752428c43c5..4927a76d2240 100644 --- a/drivers/media/i2c/soc_camera/rj54n1cb0c.c +++ b/drivers/media/i2c/soc_camera/rj54n1cb0c.c @@ -485,13 +485,14 @@ static int reg_write_multiple(struct i2c_client *client, return 0; } -static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int rj54n1_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(rj54n1_colour_fmts)) + if (code->pad || code->index >= ARRAY_SIZE(rj54n1_colour_fmts)) return -EINVAL; - *code = rj54n1_colour_fmts[index].code; + code->code = rj54n1_colour_fmts[code->index].code; return 0; } @@ -1252,7 +1253,6 @@ static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { .s_mbus_fmt = rj54n1_s_fmt, .g_mbus_fmt = rj54n1_g_fmt, .try_mbus_fmt = rj54n1_try_fmt, - .enum_mbus_fmt = rj54n1_enum_fmt, .g_crop = rj54n1_g_crop, .s_crop = rj54n1_s_crop, .cropcap = rj54n1_cropcap, @@ -1260,9 +1260,14 @@ static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { .s_mbus_config = rj54n1_s_mbus_config, }; +static const struct v4l2_subdev_pad_ops rj54n1_subdev_pad_ops = { + .enum_mbus_code = rj54n1_enum_mbus_code, +}; + static struct v4l2_subdev_ops rj54n1_subdev_ops = { .core = &rj54n1_subdev_core_ops, .video = &rj54n1_subdev_video_ops, + .pad = &rj54n1_subdev_pad_ops, }; /* diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c index 9b853215d146..f8c0c713d06c 100644 --- a/drivers/media/i2c/soc_camera/tw9910.c +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -821,13 +821,14 @@ static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { .s_power = tw9910_s_power, }; -static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int tw9910_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index) + if (code->pad || code->index) return -EINVAL; - *code = MEDIA_BUS_FMT_UYVY8_2X8; + code->code = MEDIA_BUS_FMT_UYVY8_2X8; return 0; } @@ -885,15 +886,19 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { .try_mbus_fmt = tw9910_try_fmt, .cropcap = tw9910_cropcap, .g_crop = tw9910_g_crop, - .enum_mbus_fmt = tw9910_enum_fmt, .g_mbus_config = tw9910_g_mbus_config, .s_mbus_config = tw9910_s_mbus_config, .g_tvnorms = tw9910_g_tvnorms, }; +static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { + .enum_mbus_code = tw9910_enum_mbus_code, +}; + static struct v4l2_subdev_ops tw9910_subdev_ops = { .core = &tw9910_subdev_core_ops, .video = &tw9910_subdev_video_ops, + .pad = &tw9910_subdev_pad_ops, }; /* diff --git a/drivers/media/i2c/sr030pc30.c b/drivers/media/i2c/sr030pc30.c index 10c735c3a082..0a0a1886ee4c 100644 --- a/drivers/media/i2c/sr030pc30.c +++ b/drivers/media/i2c/sr030pc30.c @@ -471,13 +471,15 @@ static int sr030pc30_s_ctrl(struct v4l2_ctrl *ctrl) return 0; } -static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int sr030pc30_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (!code || index >= ARRAY_SIZE(sr030pc30_formats)) + if (!code || code->pad || + code->index >= ARRAY_SIZE(sr030pc30_formats)) return -EINVAL; - *code = sr030pc30_formats[index].code; + code->code = sr030pc30_formats[code->index].code; return 0; } @@ -640,12 +642,16 @@ static const struct v4l2_subdev_video_ops sr030pc30_video_ops = { .g_mbus_fmt = sr030pc30_g_fmt, .s_mbus_fmt = sr030pc30_s_fmt, .try_mbus_fmt = sr030pc30_try_fmt, - .enum_mbus_fmt = sr030pc30_enum_fmt, +}; + +static const struct v4l2_subdev_pad_ops sr030pc30_pad_ops = { + .enum_mbus_code = sr030pc30_enum_mbus_code, }; static const struct v4l2_subdev_ops sr030pc30_ops = { .core = &sr030pc30_core_ops, .video = &sr030pc30_video_ops, + .pad = &sr030pc30_pad_ops, }; /* diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index 1c6bc306ecdc..a822d1541614 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -746,25 +746,6 @@ static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) return err; } -/** - * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt - * @sd: pointer to standard V4L2 sub-device structure - * @index: index of pixelcode to retrieve - * @code: receives the pixelcode - * - * Enumerates supported mediabus formats - */ -static int -tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) -{ - if (index) - return -EINVAL; - - *code = MEDIA_BUS_FMT_YUYV10_2X10; - return 0; -} - /** * tvp514x_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt * @sd: pointer to standard V4L2 sub-device structure @@ -1016,7 +997,6 @@ static const struct v4l2_subdev_video_ops tvp514x_video_ops = { .s_std = tvp514x_s_std, .s_routing = tvp514x_s_routing, .querystd = tvp514x_querystd, - .enum_mbus_fmt = tvp514x_enum_mbus_fmt, .g_mbus_fmt = tvp514x_mbus_fmt, .try_mbus_fmt = tvp514x_mbus_fmt, .s_mbus_fmt = tvp514x_mbus_fmt, diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index 68cdab9c0903..f2f87b73184c 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -817,13 +817,14 @@ static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd) } } -static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) +static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index) + if (code->pad || code->index) return -EINVAL; - *code = MEDIA_BUS_FMT_UYVY8_2X8; + code->code = MEDIA_BUS_FMT_UYVY8_2X8; return 0; } @@ -1068,7 +1069,6 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .s_std = tvp5150_s_std, .s_routing = tvp5150_s_routing, - .enum_mbus_fmt = tvp5150_enum_mbus_fmt, .s_mbus_fmt = tvp5150_mbus_fmt, .try_mbus_fmt = tvp5150_mbus_fmt, .g_mbus_fmt = tvp5150_mbus_fmt, @@ -1084,11 +1084,16 @@ static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { .s_raw_fmt = tvp5150_s_raw_fmt, }; +static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = { + .enum_mbus_code = tvp5150_enum_mbus_code, +}; + static const struct v4l2_subdev_ops tvp5150_ops = { .core = &tvp5150_core_ops, .tuner = &tvp5150_tuner_ops, .video = &tvp5150_video_ops, .vbi = &tvp5150_vbi_ops, + .pad = &tvp5150_pad_ops, }; diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index 787cdfb08749..d21fa1a62e41 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -746,25 +746,6 @@ static int tvp7002_s_register(struct v4l2_subdev *sd, } #endif -/* - * tvp7002_enum_mbus_fmt() - Enum supported mediabus formats - * @sd: pointer to standard V4L2 sub-device structure - * @index: format index - * @code: pointer to mediabus format - * - * Enumerate supported mediabus formats. - */ - -static int tvp7002_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) -{ - /* Check requested format index is within range */ - if (index) - return -EINVAL; - *code = MEDIA_BUS_FMT_YUYV10_1X20; - return 0; -} - /* * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream * @sd: pointer to standard V4L2 sub-device structure @@ -927,7 +908,6 @@ static const struct v4l2_subdev_video_ops tvp7002_video_ops = { .g_mbus_fmt = tvp7002_mbus_fmt, .try_mbus_fmt = tvp7002_mbus_fmt, .s_mbus_fmt = tvp7002_mbus_fmt, - .enum_mbus_fmt = tvp7002_enum_mbus_fmt, }; /* media pad related operation handlers */ diff --git a/drivers/media/i2c/vs6624.c b/drivers/media/i2c/vs6624.c index 00e7f043977e..b1d0a1b28ca8 100644 --- a/drivers/media/i2c/vs6624.c +++ b/drivers/media/i2c/vs6624.c @@ -557,13 +557,14 @@ static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl) return 0; } -static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, - u32 *code) +static int vs6624_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { - if (index >= ARRAY_SIZE(vs6624_formats)) + if (code->pad || code->index >= ARRAY_SIZE(vs6624_formats)) return -EINVAL; - *code = vs6624_formats[index].mbus_code; + code->code = vs6624_formats[code->index].mbus_code; return 0; } @@ -738,7 +739,6 @@ static const struct v4l2_subdev_core_ops vs6624_core_ops = { }; static const struct v4l2_subdev_video_ops vs6624_video_ops = { - .enum_mbus_fmt = vs6624_enum_mbus_fmt, .try_mbus_fmt = vs6624_try_mbus_fmt, .s_mbus_fmt = vs6624_s_mbus_fmt, .g_mbus_fmt = vs6624_g_mbus_fmt, @@ -747,9 +747,14 @@ static const struct v4l2_subdev_video_ops vs6624_video_ops = { .s_stream = vs6624_s_stream, }; +static const struct v4l2_subdev_pad_ops vs6624_pad_ops = { + .enum_mbus_code = vs6624_enum_mbus_code, +}; + static const struct v4l2_subdev_ops vs6624_ops = { .core = &vs6624_core_ops, .video = &vs6624_video_ops, + .pad = &vs6624_pad_ops, }; static int vs6624_probe(struct i2c_client *client, diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c index 6a437f86dcdc..6ea11b1e755e 100644 --- a/drivers/media/platform/blackfin/bfin_capture.c +++ b/drivers/media/platform/blackfin/bfin_capture.c @@ -156,14 +156,18 @@ static struct bcap_buffer *to_bcap_vb(struct vb2_buffer *vb) static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) { - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; struct bcap_format *sf; unsigned int num_formats = 0; int i, j; - while (!v4l2_subdev_call(bcap_dev->sd, video, - enum_mbus_fmt, num_formats, &code)) + while (!v4l2_subdev_call(bcap_dev->sd, pad, + enum_mbus_code, NULL, &code)) { num_formats++; + code.index++; + } if (!num_formats) return -ENXIO; @@ -172,10 +176,11 @@ static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) return -ENOMEM; for (i = 0; i < num_formats; i++) { - v4l2_subdev_call(bcap_dev->sd, video, - enum_mbus_fmt, i, &code); + code.index = i; + v4l2_subdev_call(bcap_dev->sd, pad, + enum_mbus_code, NULL, &code); for (j = 0; j < BCAP_MAX_FMTS; j++) - if (code == bcap_formats[j].mbus_code) + if (code.code == bcap_formats[j].mbus_code) break; if (j == BCAP_MAX_FMTS) { /* we don't allow this sensor working with our bridge */ diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index c835beb2a1a8..cbb7e22cab40 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -648,19 +648,22 @@ static int isi_camera_get_formats(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int formats = 0, ret; /* sensor format */ - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; /* soc camera host format */ const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* No more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { dev_err(icd->parent, - "Invalid format code #%u: %d\n", idx, code); + "Invalid format code #%u: %d\n", idx, code.code); return 0; } @@ -672,7 +675,7 @@ static int isi_camera_get_formats(struct soc_camera_device *icd, return 0; } - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_UYVY8_2X8: case MEDIA_BUS_FMT_VYUY8_2X8: case MEDIA_BUS_FMT_YUYV8_2X8: @@ -680,10 +683,10 @@ static int isi_camera_get_formats(struct soc_camera_device *icd, formats++; if (xlate) { xlate->host_fmt = &isi_camera_formats[0]; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(icd->parent, "Providing format %s using code %d\n", - isi_camera_formats[0].name, code); + isi_camera_formats[0].name, code.code); } break; default: @@ -699,7 +702,7 @@ static int isi_camera_get_formats(struct soc_camera_device *icd, formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; } diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 192377f55840..b891b7f2b7e9 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -943,22 +943,25 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_mbus_pixelfmt *fmt; struct device *dev = icd->parent; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; int ret, formats = 0; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* no more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { - dev_err(dev, "Invalid format code #%u: %d\n", idx, code); + dev_err(dev, "Invalid format code #%u: %d\n", idx, code.code); return 0; } - if (code == MEDIA_BUS_FMT_YUYV8_2X8 || - code == MEDIA_BUS_FMT_UYVY8_2X8) { + if (code.code == MEDIA_BUS_FMT_YUYV8_2X8 || + code.code == MEDIA_BUS_FMT_UYVY8_2X8) { formats++; if (xlate) { /* @@ -967,21 +970,21 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, */ xlate->host_fmt = soc_mbus_get_fmtdesc(MEDIA_BUS_FMT_YUYV8_1_5X8); - xlate->code = code; + xlate->code = code.code; dev_dbg(dev, "Providing host format %s for sensor code %d\n", - xlate->host_fmt->name, code); + xlate->host_fmt->name, code.code); xlate++; } } - if (code == MEDIA_BUS_FMT_UYVY8_2X8) { + if (code.code == MEDIA_BUS_FMT_UYVY8_2X8) { formats++; if (xlate) { xlate->host_fmt = soc_mbus_get_fmtdesc(MEDIA_BUS_FMT_YUYV8_2X8); - xlate->code = code; + xlate->code = code.code; dev_dbg(dev, "Providing host format %s for sensor code %d\n", - xlate->host_fmt->name, code); + xlate->host_fmt->name, code.code); xlate++; } } @@ -990,7 +993,7 @@ static int mx2_camera_get_formats(struct soc_camera_device *icd, formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; } return formats; diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index 3435fd2ca8ec..a29848976f92 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -659,18 +659,21 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; int formats = 0, ret; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* No more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { dev_warn(icd->parent, - "Unsupported format code #%u: 0x%x\n", idx, code); + "Unsupported format code #%u: 0x%x\n", idx, code.code); return 0; } @@ -679,25 +682,25 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id if (ret < 0) return 0; - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_SBGGR10_1X10: formats++; if (xlate) { xlate->host_fmt = &mx3_camera_formats[0]; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "Providing format %s using code 0x%x\n", - mx3_camera_formats[0].name, code); + mx3_camera_formats[0].name, code.code); } break; case MEDIA_BUS_FMT_Y10_1X10: formats++; if (xlate) { xlate->host_fmt = &mx3_camera_formats[1]; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "Providing format %s using code 0x%x\n", - mx3_camera_formats[1].name, code); + mx3_camera_formats[1].name, code.code); } break; default: @@ -709,7 +712,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n", (fmt->fourcc >> (0*8)) & 0xFF, (fmt->fourcc >> (1*8)) & 0xFF, diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index 16f65ecb70a3..3f250767d162 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1068,18 +1068,21 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; int formats = 0, ret; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* No more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { dev_warn(dev, "%s: unsupported format code #%d: %d\n", __func__, - idx, code); + idx, code.code); return 0; } @@ -1087,7 +1090,7 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, if (fmt->bits_per_sample != 8) return 0; - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_YUYV8_2X8: case MEDIA_BUS_FMT_YVYU8_2X8: case MEDIA_BUS_FMT_UYVY8_2X8: @@ -1098,14 +1101,14 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, case MEDIA_BUS_FMT_RGB565_2X8_LE: formats++; if (xlate) { - xlate->host_fmt = soc_mbus_find_fmtdesc(code, + xlate->host_fmt = soc_mbus_find_fmtdesc(code.code, omap1_cam_formats, ARRAY_SIZE(omap1_cam_formats)); - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "%s: providing format %s as byte swapped code #%d\n", - __func__, xlate->host_fmt->name, code); + __func__, xlate->host_fmt->name, code.code); } default: if (xlate) @@ -1116,7 +1119,7 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; } diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c index 8d6e343fec0f..f6fa0acc5251 100644 --- a/drivers/media/platform/soc_camera/pxa_camera.c +++ b/drivers/media/platform/soc_camera/pxa_camera.c @@ -1253,17 +1253,20 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id struct device *dev = icd->parent; int formats = 0, ret; struct pxa_cam *cam; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* No more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { - dev_err(dev, "Invalid format code #%u: %d\n", idx, code); + dev_err(dev, "Invalid format code #%u: %d\n", idx, code.code); return 0; } @@ -1282,15 +1285,15 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id cam = icd->host_priv; } - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_UYVY8_2X8: formats++; if (xlate) { xlate->host_fmt = &pxa_camera_formats[0]; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "Providing format %s using code %d\n", - pxa_camera_formats[0].name, code); + pxa_camera_formats[0].name, code.code); } case MEDIA_BUS_FMT_VYUY8_2X8: case MEDIA_BUS_FMT_YUYV8_2X8: @@ -1314,7 +1317,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; } diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 9351f64dee7b..8796bdce671f 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -1318,16 +1318,19 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, int ret, k, n; int formats = 0; struct rcar_vin_cam *cam; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { - dev_warn(dev, "unsupported format code #%u: %d\n", idx, code); + dev_warn(dev, "unsupported format code #%u: %d\n", idx, code.code); return 0; } @@ -1408,7 +1411,7 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, if (!idx) cam->extra_fmt = NULL; - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_YUYV8_1X16: case MEDIA_BUS_FMT_YUYV8_2X8: case MEDIA_BUS_FMT_YUYV10_2X10: @@ -1422,9 +1425,9 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, formats += n; for (k = 0; xlate && k < n; k++, xlate++) { xlate->host_fmt = &rcar_vin_formats[k]; - xlate->code = code; + xlate->code = code.code; dev_dbg(dev, "Providing format %s using code %d\n", - rcar_vin_formats[k].name, code); + rcar_vin_formats[k].name, code.code); } break; default: @@ -1440,7 +1443,7 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; } diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 9ce202f53934..b4faf8f1fd15 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1048,17 +1048,20 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int int ret, k, n; int formats = 0; struct sh_mobile_ceu_cam *cam; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = idx, + }; const struct soc_mbus_pixelfmt *fmt; - ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); if (ret < 0) /* No more formats */ return 0; - fmt = soc_mbus_get_fmtdesc(code); + fmt = soc_mbus_get_fmtdesc(code.code); if (!fmt) { - dev_warn(dev, "unsupported format code #%u: %d\n", idx, code); + dev_warn(dev, "unsupported format code #%u: %d\n", idx, code.code); return 0; } @@ -1140,7 +1143,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int if (!idx) cam->extra_fmt = NULL; - switch (code) { + switch (code.code) { case MEDIA_BUS_FMT_UYVY8_2X8: case MEDIA_BUS_FMT_VYUY8_2X8: case MEDIA_BUS_FMT_YUYV8_2X8: @@ -1163,10 +1166,10 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int formats += n; for (k = 0; xlate && k < n; k++) { xlate->host_fmt = &sh_mobile_ceu_formats[k]; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "Providing format %s using code %d\n", - sh_mobile_ceu_formats[k].name, code); + sh_mobile_ceu_formats[k].name, code.code); } break; default: @@ -1178,7 +1181,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int formats++; if (xlate) { xlate->host_fmt = fmt; - xlate->code = code; + xlate->code = code.code; xlate++; dev_dbg(dev, "Providing format %s in pass-through mode\n", fmt->name); diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c index 7bfe7665687f..7fd49cb009d3 100644 --- a/drivers/media/platform/soc_camera/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -484,10 +484,14 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) struct soc_camera_host *ici = to_soc_camera_host(icd->parent); unsigned int i, fmts = 0, raw_fmts = 0; int ret; - u32 code; + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; - while (!v4l2_subdev_call(sd, video, enum_mbus_fmt, raw_fmts, &code)) + while (!v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code)) { raw_fmts++; + code.index++; + } if (!ici->ops->get_formats) /* @@ -521,11 +525,12 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) fmts = 0; for (i = 0; i < raw_fmts; i++) if (!ici->ops->get_formats) { - v4l2_subdev_call(sd, video, enum_mbus_fmt, i, &code); + code.index = i; + v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); icd->user_formats[fmts].host_fmt = - soc_mbus_get_fmtdesc(code); + soc_mbus_get_fmtdesc(code.code); if (icd->user_formats[fmts].host_fmt) - icd->user_formats[fmts++].code = code; + icd->user_formats[fmts++].code = code.code; } else { ret = ici->ops->get_formats(icd, i, &icd->user_formats[fmts]); diff --git a/drivers/media/platform/soc_camera/soc_camera_platform.c b/drivers/media/platform/soc_camera/soc_camera_platform.c index f535910b4187..934b9183cea8 100644 --- a/drivers/media/platform/soc_camera/soc_camera_platform.c +++ b/drivers/media/platform/soc_camera/soc_camera_platform.c @@ -61,15 +61,16 @@ static struct v4l2_subdev_core_ops platform_subdev_core_ops = { .s_power = soc_camera_platform_s_power, }; -static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int index, - u32 *code) +static int soc_camera_platform_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) { struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); - if (index) + if (code->pad || code->index) return -EINVAL; - *code = p->format.code; + code->code = p->format.code; return 0; } @@ -117,7 +118,6 @@ static int soc_camera_platform_g_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops platform_subdev_video_ops = { .s_stream = soc_camera_platform_s_stream, - .enum_mbus_fmt = soc_camera_platform_enum_fmt, .cropcap = soc_camera_platform_cropcap, .g_crop = soc_camera_platform_g_crop, .try_mbus_fmt = soc_camera_platform_fill_fmt, @@ -126,9 +126,14 @@ static struct v4l2_subdev_video_ops platform_subdev_video_ops = { .g_mbus_config = soc_camera_platform_g_mbus_config, }; +static const struct v4l2_subdev_pad_ops platform_subdev_pad_ops = { + .enum_mbus_code = soc_camera_platform_enum_mbus_code, +}; + static struct v4l2_subdev_ops platform_subdev_ops = { .core = &platform_subdev_core_ops, .video = &platform_subdev_video_ops, + .pad = &platform_subdev_pad_ops, }; static int soc_camera_platform_probe(struct platform_device *pdev) diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 2f0a345a7fed..c2eed99ebc78 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -293,8 +293,6 @@ struct v4l2_mbus_frame_desc { g_dv_timings(): Get custom dv timings in the sub device. - enum_mbus_fmt: enumerate pixel formats, provided by a video data source - g_mbus_fmt: get the current pixel format, provided by a video data source try_mbus_fmt: try to set a pixel format on a video data source @@ -338,8 +336,6 @@ struct v4l2_subdev_video_ops { struct v4l2_dv_timings *timings); int (*query_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); - int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index, - u32 *code); int (*g_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); int (*try_mbus_fmt)(struct v4l2_subdev *sd, -- cgit v1.2.3 From da298c6d98d531de778ba8dd6657b1093ef855d0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 9 Apr 2015 04:02:34 -0300 Subject: [media] v4l2: replace video op g_mbus_fmt by pad op get_fmt The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses by the get_fmt pad op and remove the video op. Signed-off-by: Hans Verkuil Acked-by: Guennadi Liakhovetski Acked-by: Prabhakar Lad Cc: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7170.c | 11 +++-- drivers/media/i2c/adv7175.c | 11 +++-- drivers/media/i2c/adv7183.c | 12 +++-- drivers/media/i2c/adv7842.c | 14 ++++-- drivers/media/i2c/ak881x.c | 24 ++++------ drivers/media/i2c/ml86v7667.c | 14 ++++-- drivers/media/i2c/saa6752hs.c | 14 +++++- drivers/media/i2c/soc_camera/imx074.c | 11 +++-- drivers/media/i2c/soc_camera/mt9m001.c | 11 +++-- drivers/media/i2c/soc_camera/mt9m111.c | 11 +++-- drivers/media/i2c/soc_camera/mt9t031.c | 11 +++-- drivers/media/i2c/soc_camera/mt9t112.c | 11 +++-- drivers/media/i2c/soc_camera/mt9v022.c | 11 +++-- drivers/media/i2c/soc_camera/ov2640.c | 11 +++-- drivers/media/i2c/soc_camera/ov5642.c | 11 +++-- drivers/media/i2c/soc_camera/ov6650.c | 11 +++-- drivers/media/i2c/soc_camera/ov772x.c | 11 +++-- drivers/media/i2c/soc_camera/rj54n1cb0c.c | 11 +++-- drivers/media/i2c/soc_camera/tw9910.c | 11 +++-- drivers/media/i2c/sr030pc30.c | 12 +++-- drivers/media/i2c/tvp514x.c | 35 ++------------ drivers/media/i2c/tvp5150.c | 15 +++--- drivers/media/i2c/tvp7002.c | 28 ----------- drivers/media/i2c/vs6624.c | 12 +++-- drivers/media/pci/saa7134/saa7134-empress.c | 9 ++-- drivers/media/platform/am437x/am437x-vpfe.c | 6 +-- drivers/media/platform/davinci/vpfe_capture.c | 19 ++++---- drivers/media/platform/s5p-tv/hdmi_drv.c | 12 +++-- drivers/media/platform/s5p-tv/mixer_drv.c | 15 ++++-- drivers/media/platform/s5p-tv/sdo_drv.c | 14 ++++-- drivers/media/platform/soc_camera/mx2_camera.c | 13 ++++-- drivers/media/platform/soc_camera/mx3_camera.c | 25 +++++----- drivers/media/platform/soc_camera/omap1_camera.c | 17 ++++--- drivers/media/platform/soc_camera/pxa_camera.c | 21 +++++---- drivers/media/platform/soc_camera/rcar_vin.c | 46 ++++++++++-------- .../platform/soc_camera/sh_mobile_ceu_camera.c | 54 ++++++++++++---------- drivers/media/platform/soc_camera/soc_camera.c | 15 +++--- .../platform/soc_camera/soc_camera_platform.c | 9 ++-- include/media/v4l2-subdev.h | 4 -- 39 files changed, 352 insertions(+), 261 deletions(-) (limited to 'include') diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c index cfe963b2fe1c..58d0a3cc0759 100644 --- a/drivers/media/i2c/adv7170.c +++ b/drivers/media/i2c/adv7170.c @@ -273,11 +273,16 @@ static int adv7170_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int adv7170_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int adv7170_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; u8 val = adv7170_read(sd, 0x7); + if (format->pad) + return -EINVAL; + if ((val & 0x40) == (1 << 6)) mf->code = MEDIA_BUS_FMT_UYVY8_1X16; else @@ -323,11 +328,11 @@ static const struct v4l2_subdev_video_ops adv7170_video_ops = { .s_std_output = adv7170_s_std_output, .s_routing = adv7170_s_routing, .s_mbus_fmt = adv7170_s_fmt, - .g_mbus_fmt = adv7170_g_fmt, }; static const struct v4l2_subdev_pad_ops adv7170_pad_ops = { .enum_mbus_code = adv7170_enum_mbus_code, + .get_fmt = adv7170_get_fmt, }; static const struct v4l2_subdev_ops adv7170_ops = { diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c index 3f40304e856c..f7443454f682 100644 --- a/drivers/media/i2c/adv7175.c +++ b/drivers/media/i2c/adv7175.c @@ -311,11 +311,16 @@ static int adv7175_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int adv7175_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int adv7175_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; u8 val = adv7175_read(sd, 0x7); + if (format->pad) + return -EINVAL; + if ((val & 0x40) == (1 << 6)) mf->code = MEDIA_BUS_FMT_UYVY8_1X16; else @@ -376,11 +381,11 @@ static const struct v4l2_subdev_video_ops adv7175_video_ops = { .s_std_output = adv7175_s_std_output, .s_routing = adv7175_s_routing, .s_mbus_fmt = adv7175_s_fmt, - .g_mbus_fmt = adv7175_g_fmt, }; static const struct v4l2_subdev_pad_ops adv7175_pad_ops = { .enum_mbus_code = adv7175_enum_mbus_code, + .get_fmt = adv7175_get_fmt, }; static const struct v4l2_subdev_ops adv7175_ops = { diff --git a/drivers/media/i2c/adv7183.c b/drivers/media/i2c/adv7183.c index a0bcfefc28fc..9d58b750ef1e 100644 --- a/drivers/media/i2c/adv7183.c +++ b/drivers/media/i2c/adv7183.c @@ -460,12 +460,16 @@ static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd, return 0; } -static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int adv7183_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { struct adv7183 *decoder = to_adv7183(sd); - *fmt = decoder->fmt; + if (format->pad) + return -EINVAL; + + format->format = decoder->fmt; return 0; } @@ -517,12 +521,12 @@ static const struct v4l2_subdev_video_ops adv7183_video_ops = { .g_input_status = adv7183_g_input_status, .try_mbus_fmt = adv7183_try_mbus_fmt, .s_mbus_fmt = adv7183_s_mbus_fmt, - .g_mbus_fmt = adv7183_g_mbus_fmt, .s_stream = adv7183_s_stream, }; static const struct v4l2_subdev_pad_ops adv7183_pad_ops = { .enum_mbus_code = adv7183_enum_mbus_code, + .get_fmt = adv7183_get_fmt, }; static const struct v4l2_subdev_ops adv7183_ops = { diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 644e910f9d8a..86e65a8a5409 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -1878,11 +1878,16 @@ static int adv7842_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int adv7842_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int adv7842_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct adv7842_state *state = to_state(sd); + if (format->pad) + return -EINVAL; + fmt->width = state->timings.bt.width; fmt->height = state->timings.bt.height; fmt->code = MEDIA_BUS_FMT_FIXED; @@ -2810,9 +2815,6 @@ static const struct v4l2_subdev_video_ops adv7842_video_ops = { .s_dv_timings = adv7842_s_dv_timings, .g_dv_timings = adv7842_g_dv_timings, .query_dv_timings = adv7842_query_dv_timings, - .g_mbus_fmt = adv7842_g_mbus_fmt, - .try_mbus_fmt = adv7842_g_mbus_fmt, - .s_mbus_fmt = adv7842_g_mbus_fmt, }; static const struct v4l2_subdev_pad_ops adv7842_pad_ops = { @@ -2821,6 +2823,8 @@ static const struct v4l2_subdev_pad_ops adv7842_pad_ops = { .enum_dv_timings = adv7842_enum_dv_timings, .dv_timings_cap = adv7842_dv_timings_cap, .enum_mbus_code = adv7842_enum_mbus_code, + .get_fmt = adv7842_fill_fmt, + .set_fmt = adv7842_fill_fmt, }; static const struct v4l2_subdev_ops adv7842_ops = { diff --git a/drivers/media/i2c/ak881x.c b/drivers/media/i2c/ak881x.c index 4428fb95d033..29846245aa3b 100644 --- a/drivers/media/i2c/ak881x.c +++ b/drivers/media/i2c/ak881x.c @@ -93,12 +93,17 @@ static int ak881x_s_register(struct v4l2_subdev *sd, } #endif -static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ak881x_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct ak881x *ak881x = to_ak881x(client); + if (format->pad) + return -EINVAL; + v4l_bound_align_image(&mf->width, 0, 720, 2, &mf->height, 0, ak881x->lines, 1, 0); mf->field = V4L2_FIELD_INTERLACED; @@ -108,16 +113,6 @@ static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, return 0; } -static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) -{ - if (mf->field != V4L2_FIELD_INTERLACED || - mf->code != MEDIA_BUS_FMT_YUYV8_2X8) - return -EINVAL; - - return ak881x_try_g_mbus_fmt(sd, mf); -} - static int ak881x_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) @@ -212,9 +207,6 @@ static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { }; static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { - .s_mbus_fmt = ak881x_s_mbus_fmt, - .g_mbus_fmt = ak881x_try_g_mbus_fmt, - .try_mbus_fmt = ak881x_try_g_mbus_fmt, .cropcap = ak881x_cropcap, .s_std_output = ak881x_s_std_output, .s_stream = ak881x_s_stream, @@ -222,6 +214,8 @@ static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { static const struct v4l2_subdev_pad_ops ak881x_subdev_pad_ops = { .enum_mbus_code = ak881x_enum_mbus_code, + .set_fmt = ak881x_fill_fmt, + .get_fmt = ak881x_fill_fmt, }; static struct v4l2_subdev_ops ak881x_subdev_ops = { diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c index e7b220239d30..af5eaf2db2a0 100644 --- a/drivers/media/i2c/ml86v7667.c +++ b/drivers/media/i2c/ml86v7667.c @@ -203,10 +203,15 @@ static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int ml86v7667_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int ml86v7667_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { struct ml86v7667_priv *priv = to_ml86v7667(sd); + struct v4l2_mbus_framefmt *fmt = &format->format; + + if (format->pad) + return -EINVAL; fmt->code = MEDIA_BUS_FMT_YUYV8_2X8; fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; @@ -280,14 +285,13 @@ static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { .s_std = ml86v7667_s_std, .querystd = ml86v7667_querystd, .g_input_status = ml86v7667_g_input_status, - .try_mbus_fmt = ml86v7667_mbus_fmt, - .g_mbus_fmt = ml86v7667_mbus_fmt, - .s_mbus_fmt = ml86v7667_mbus_fmt, .g_mbus_config = ml86v7667_g_mbus_config, }; static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = { .enum_mbus_code = ml86v7667_enum_mbus_code, + .get_fmt = ml86v7667_fill_fmt, + .set_fmt = ml86v7667_fill_fmt, }; static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { diff --git a/drivers/media/i2c/saa6752hs.c b/drivers/media/i2c/saa6752hs.c index f14c0e6435a3..b3829078d646 100644 --- a/drivers/media/i2c/saa6752hs.c +++ b/drivers/media/i2c/saa6752hs.c @@ -554,10 +554,16 @@ static int saa6752hs_init(struct v4l2_subdev *sd, u32 leading_null_bytes) return 0; } -static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +static int saa6752hs_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *f = &format->format; struct saa6752hs_state *h = to_state(sd); + if (format->pad) + return -EINVAL; + if (h->video_format == SAA6752HS_VF_UNKNOWN) h->video_format = SAA6752HS_VF_D1; f->width = v4l2_format_table[h->video_format].fmt.pix.width; @@ -649,12 +655,16 @@ static const struct v4l2_subdev_video_ops saa6752hs_video_ops = { .s_std = saa6752hs_s_std, .s_mbus_fmt = saa6752hs_s_mbus_fmt, .try_mbus_fmt = saa6752hs_try_mbus_fmt, - .g_mbus_fmt = saa6752hs_g_mbus_fmt, +}; + +static const struct v4l2_subdev_pad_ops saa6752hs_pad_ops = { + .get_fmt = saa6752hs_get_fmt, }; static const struct v4l2_subdev_ops saa6752hs_ops = { .core = &saa6752hs_core_ops, .video = &saa6752hs_video_ops, + .pad = &saa6752hs_pad_ops, }; static int saa6752hs_probe(struct i2c_client *client, diff --git a/drivers/media/i2c/soc_camera/imx074.c b/drivers/media/i2c/soc_camera/imx074.c index 7a2d90654fee..ba60ccfffa4f 100644 --- a/drivers/media/i2c/soc_camera/imx074.c +++ b/drivers/media/i2c/soc_camera/imx074.c @@ -191,14 +191,19 @@ static int imx074_s_fmt(struct v4l2_subdev *sd, return 0; } -static int imx074_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int imx074_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct imx074 *priv = to_imx074(client); const struct imx074_datafmt *fmt = priv->fmt; + if (format->pad) + return -EINVAL; + mf->code = fmt->code; mf->colorspace = fmt->colorspace; mf->width = IMX074_WIDTH; @@ -278,7 +283,6 @@ static int imx074_g_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops imx074_subdev_video_ops = { .s_stream = imx074_s_stream, .s_mbus_fmt = imx074_s_fmt, - .g_mbus_fmt = imx074_g_fmt, .try_mbus_fmt = imx074_try_fmt, .g_crop = imx074_g_crop, .cropcap = imx074_cropcap, @@ -291,6 +295,7 @@ static struct v4l2_subdev_core_ops imx074_subdev_core_ops = { static const struct v4l2_subdev_pad_ops imx074_subdev_pad_ops = { .enum_mbus_code = imx074_enum_mbus_code, + .get_fmt = imx074_get_fmt, }; static struct v4l2_subdev_ops imx074_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c index ba18e010b9da..06f4e116978d 100644 --- a/drivers/media/i2c/soc_camera/mt9m001.c +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -250,11 +250,16 @@ static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int mt9m001_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int mt9m001_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9m001 *mt9m001 = to_mt9m001(client); + struct v4l2_mbus_framefmt *mf = &format->format; + + if (format->pad) + return -EINVAL; mf->width = mt9m001->rect.width; mf->height = mt9m001->rect.height; @@ -613,7 +618,6 @@ static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_stream = mt9m001_s_stream, .s_mbus_fmt = mt9m001_s_fmt, - .g_mbus_fmt = mt9m001_g_fmt, .try_mbus_fmt = mt9m001_try_fmt, .s_crop = mt9m001_s_crop, .g_crop = mt9m001_g_crop, @@ -628,6 +632,7 @@ static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { .enum_mbus_code = mt9m001_enum_mbus_code, + .get_fmt = mt9m001_get_fmt, }; static struct v4l2_subdev_ops mt9m001_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c index b7731401dc39..7ac87b112a11 100644 --- a/drivers/media/i2c/soc_camera/mt9m111.c +++ b/drivers/media/i2c/soc_camera/mt9m111.c @@ -447,11 +447,16 @@ static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int mt9m111_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int mt9m111_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + if (format->pad) + return -EINVAL; + mf->width = mt9m111->width; mf->height = mt9m111->height; mf->code = mt9m111->fmt->code; @@ -867,7 +872,6 @@ static int mt9m111_g_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { .s_mbus_fmt = mt9m111_s_fmt, - .g_mbus_fmt = mt9m111_g_fmt, .try_mbus_fmt = mt9m111_try_fmt, .s_crop = mt9m111_s_crop, .g_crop = mt9m111_g_crop, @@ -877,6 +881,7 @@ static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { static const struct v4l2_subdev_pad_ops mt9m111_subdev_pad_ops = { .enum_mbus_code = mt9m111_enum_mbus_code, + .get_fmt = mt9m111_get_fmt, }; static struct v4l2_subdev_ops mt9m111_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index 15ac4dc29967..97193e471ab5 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -337,12 +337,17 @@ static int mt9t031_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int mt9t031_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int mt9t031_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t031 *mt9t031 = to_mt9t031(client); + if (format->pad) + return -EINVAL; + mf->width = mt9t031->rect.width / mt9t031->xskip; mf->height = mt9t031->rect.height / mt9t031->yskip; mf->code = MEDIA_BUS_FMT_SBGGR10_1X10; @@ -714,7 +719,6 @@ static int mt9t031_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { .s_stream = mt9t031_s_stream, .s_mbus_fmt = mt9t031_s_fmt, - .g_mbus_fmt = mt9t031_g_fmt, .try_mbus_fmt = mt9t031_try_fmt, .s_crop = mt9t031_s_crop, .g_crop = mt9t031_g_crop, @@ -729,6 +733,7 @@ static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = { static const struct v4l2_subdev_pad_ops mt9t031_subdev_pad_ops = { .enum_mbus_code = mt9t031_enum_mbus_code, + .get_fmt = mt9t031_get_fmt, }; static struct v4l2_subdev_ops mt9t031_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/mt9t112.c b/drivers/media/i2c/soc_camera/mt9t112.c index 8b0cfb7f80b1..889e98ee8c62 100644 --- a/drivers/media/i2c/soc_camera/mt9t112.c +++ b/drivers/media/i2c/soc_camera/mt9t112.c @@ -904,12 +904,17 @@ static int mt9t112_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) return mt9t112_set_params(priv, rect, priv->format->code); } -static int mt9t112_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int mt9t112_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); + if (format->pad) + return -EINVAL; + mf->width = priv->frame.width; mf->height = priv->frame.height; mf->colorspace = priv->format->colorspace; @@ -1011,7 +1016,6 @@ static int mt9t112_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { .s_stream = mt9t112_s_stream, - .g_mbus_fmt = mt9t112_g_fmt, .s_mbus_fmt = mt9t112_s_fmt, .try_mbus_fmt = mt9t112_try_fmt, .cropcap = mt9t112_cropcap, @@ -1023,6 +1027,7 @@ static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { .enum_mbus_code = mt9t112_enum_mbus_code, + .get_fmt = mt9t112_get_fmt, }; /************************************************************************ diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c index 780c7ae74d69..b4ba3c5930e3 100644 --- a/drivers/media/i2c/soc_camera/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -375,12 +375,17 @@ static int mt9v022_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int mt9v022_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int mt9v022_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9v022 *mt9v022 = to_mt9v022(client); + if (format->pad) + return -EINVAL; + mf->width = mt9v022->rect.width; mf->height = mt9v022->rect.height; mf->code = mt9v022->fmt->code; @@ -841,7 +846,6 @@ static int mt9v022_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { .s_stream = mt9v022_s_stream, .s_mbus_fmt = mt9v022_s_fmt, - .g_mbus_fmt = mt9v022_g_fmt, .try_mbus_fmt = mt9v022_try_fmt, .s_crop = mt9v022_s_crop, .g_crop = mt9v022_g_crop, @@ -856,6 +860,7 @@ static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = { static const struct v4l2_subdev_pad_ops mt9v022_subdev_pad_ops = { .enum_mbus_code = mt9v022_enum_mbus_code, + .get_fmt = mt9v022_get_fmt, }; static struct v4l2_subdev_ops mt9v022_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c index 4327871c8f9f..0dffc63ee83f 100644 --- a/drivers/media/i2c/soc_camera/ov2640.c +++ b/drivers/media/i2c/soc_camera/ov2640.c @@ -845,12 +845,17 @@ err: return ret; } -static int ov2640_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ov2640_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov2640_priv *priv = to_ov2640(client); + if (format->pad) + return -EINVAL; + if (!priv->win) { u32 width = SVGA_WIDTH, height = SVGA_HEIGHT; priv->win = ov2640_select_win(&width, &height); @@ -1032,7 +1037,6 @@ static int ov2640_g_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { .s_stream = ov2640_s_stream, - .g_mbus_fmt = ov2640_g_fmt, .s_mbus_fmt = ov2640_s_fmt, .try_mbus_fmt = ov2640_try_fmt, .cropcap = ov2640_cropcap, @@ -1042,6 +1046,7 @@ static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = { .enum_mbus_code = ov2640_enum_mbus_code, + .get_fmt = ov2640_get_fmt, }; static struct v4l2_subdev_ops ov2640_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c index fcddd0ded2e3..a88397f60b8c 100644 --- a/drivers/media/i2c/soc_camera/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -822,14 +822,19 @@ static int ov5642_s_fmt(struct v4l2_subdev *sd, return 0; } -static int ov5642_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ov5642_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov5642 *priv = to_ov5642(client); const struct ov5642_datafmt *fmt = priv->fmt; + if (format->pad) + return -EINVAL; + mf->code = fmt->code; mf->colorspace = fmt->colorspace; mf->width = priv->crop_rect.width; @@ -941,7 +946,6 @@ static int ov5642_s_power(struct v4l2_subdev *sd, int on) static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { .s_mbus_fmt = ov5642_s_fmt, - .g_mbus_fmt = ov5642_g_fmt, .try_mbus_fmt = ov5642_try_fmt, .s_crop = ov5642_s_crop, .g_crop = ov5642_g_crop, @@ -951,6 +955,7 @@ static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { static const struct v4l2_subdev_pad_ops ov5642_subdev_pad_ops = { .enum_mbus_code = ov5642_enum_mbus_code, + .get_fmt = ov5642_get_fmt, }; static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { diff --git a/drivers/media/i2c/soc_camera/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c index 99e0738fdb38..29f73a55a312 100644 --- a/drivers/media/i2c/soc_camera/ov6650.c +++ b/drivers/media/i2c/soc_camera/ov6650.c @@ -499,12 +499,17 @@ static int ov6650_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int ov6650_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ov6650_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov6650 *priv = to_ov6650(client); + if (format->pad) + return -EINVAL; + mf->width = priv->rect.width >> priv->half_scale; mf->height = priv->rect.height >> priv->half_scale; mf->code = priv->code; @@ -930,7 +935,6 @@ static int ov6650_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops ov6650_video_ops = { .s_stream = ov6650_s_stream, - .g_mbus_fmt = ov6650_g_fmt, .s_mbus_fmt = ov6650_s_fmt, .try_mbus_fmt = ov6650_try_fmt, .cropcap = ov6650_cropcap, @@ -944,6 +948,7 @@ static struct v4l2_subdev_video_ops ov6650_video_ops = { static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { .enum_mbus_code = ov6650_enum_mbus_code, + .get_fmt = ov6650_get_fmt, }; static struct v4l2_subdev_ops ov6650_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c index e3a31f806636..1db204451384 100644 --- a/drivers/media/i2c/soc_camera/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -876,11 +876,16 @@ static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int ov772x_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int ov772x_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct ov772x_priv *priv = to_ov772x(sd); + if (format->pad) + return -EINVAL; + mf->width = priv->win->rect.width; mf->height = priv->win->rect.height; mf->code = priv->cfmt->code; @@ -1017,7 +1022,6 @@ static int ov772x_g_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { .s_stream = ov772x_s_stream, - .g_mbus_fmt = ov772x_g_fmt, .s_mbus_fmt = ov772x_s_fmt, .try_mbus_fmt = ov772x_try_fmt, .cropcap = ov772x_cropcap, @@ -1027,6 +1031,7 @@ static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = { .enum_mbus_code = ov772x_enum_mbus_code, + .get_fmt = ov772x_get_fmt, }; static struct v4l2_subdev_ops ov772x_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/rj54n1cb0c.c b/drivers/media/i2c/soc_camera/rj54n1cb0c.c index 4927a76d2240..8787142493cc 100644 --- a/drivers/media/i2c/soc_camera/rj54n1cb0c.c +++ b/drivers/media/i2c/soc_camera/rj54n1cb0c.c @@ -598,12 +598,17 @@ static int rj54n1_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int rj54n1_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int rj54n1_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct rj54n1 *rj54n1 = to_rj54n1(client); + if (format->pad) + return -EINVAL; + mf->code = rj54n1->fmt->code; mf->colorspace = rj54n1->fmt->colorspace; mf->field = V4L2_FIELD_NONE; @@ -1251,7 +1256,6 @@ static int rj54n1_s_mbus_config(struct v4l2_subdev *sd, static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { .s_stream = rj54n1_s_stream, .s_mbus_fmt = rj54n1_s_fmt, - .g_mbus_fmt = rj54n1_g_fmt, .try_mbus_fmt = rj54n1_try_fmt, .g_crop = rj54n1_g_crop, .s_crop = rj54n1_s_crop, @@ -1262,6 +1266,7 @@ static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { static const struct v4l2_subdev_pad_ops rj54n1_subdev_pad_ops = { .enum_mbus_code = rj54n1_enum_mbus_code, + .get_fmt = rj54n1_get_fmt, }; static struct v4l2_subdev_ops rj54n1_subdev_ops = { diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c index f8c0c713d06c..95837959f409 100644 --- a/drivers/media/i2c/soc_camera/tw9910.c +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -691,12 +691,17 @@ static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) return 0; } -static int tw9910_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int tw9910_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct tw9910_priv *priv = to_tw9910(client); + if (format->pad) + return -EINVAL; + if (!priv->scale) { priv->scale = tw9910_select_norm(priv->norm, 640, 480); if (!priv->scale) @@ -881,7 +886,6 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { .s_std = tw9910_s_std, .g_std = tw9910_g_std, .s_stream = tw9910_s_stream, - .g_mbus_fmt = tw9910_g_fmt, .s_mbus_fmt = tw9910_s_fmt, .try_mbus_fmt = tw9910_try_fmt, .cropcap = tw9910_cropcap, @@ -893,6 +897,7 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { .enum_mbus_code = tw9910_enum_mbus_code, + .get_fmt = tw9910_get_fmt, }; static struct v4l2_subdev_ops tw9910_subdev_ops = { diff --git a/drivers/media/i2c/sr030pc30.c b/drivers/media/i2c/sr030pc30.c index 0a0a1886ee4c..c0fa94570c4f 100644 --- a/drivers/media/i2c/sr030pc30.c +++ b/drivers/media/i2c/sr030pc30.c @@ -483,15 +483,19 @@ static int sr030pc30_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int sr030pc30_g_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int sr030pc30_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *mf; struct sr030pc30_info *info = to_sr030pc30(sd); int ret; - if (!mf) + if (!format || format->pad) return -EINVAL; + mf = &format->format; + if (!info->curr_win || !info->curr_fmt) { ret = sr030pc30_set_params(sd); if (ret) @@ -639,13 +643,13 @@ static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { }; static const struct v4l2_subdev_video_ops sr030pc30_video_ops = { - .g_mbus_fmt = sr030pc30_g_fmt, .s_mbus_fmt = sr030pc30_s_fmt, .try_mbus_fmt = sr030pc30_try_fmt, }; static const struct v4l2_subdev_pad_ops sr030pc30_pad_ops = { .enum_mbus_code = sr030pc30_enum_mbus_code, + .get_fmt = sr030pc30_get_fmt, }; static const struct v4l2_subdev_ops sr030pc30_ops = { diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index a822d1541614..24e47279e30c 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -746,35 +746,6 @@ static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) return err; } -/** - * tvp514x_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt - * @sd: pointer to standard V4L2 sub-device structure - * @f: pointer to the mediabus format structure - * - * Negotiates the image capture size and mediabus format. - */ -static int -tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) -{ - struct tvp514x_decoder *decoder = to_decoder(sd); - enum tvp514x_std current_std; - - if (f == NULL) - return -EINVAL; - - /* Calculate height and width based on current standard */ - current_std = decoder->current_std; - - f->code = MEDIA_BUS_FMT_YUYV8_2X8; - f->width = decoder->std_list[current_std].width; - f->height = decoder->std_list[current_std].height; - f->field = V4L2_FIELD_INTERLACED; - f->colorspace = V4L2_COLORSPACE_SMPTE170M; - v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n", - f->width, f->height); - return 0; -} - /** * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm * @sd: pointer to standard V4L2 sub-device structure @@ -943,6 +914,9 @@ static int tvp514x_get_pad_format(struct v4l2_subdev *sd, struct tvp514x_decoder *decoder = to_decoder(sd); __u32 which = format->which; + if (format->pad) + return -EINVAL; + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { format->format = decoder->format; return 0; @@ -997,9 +971,6 @@ static const struct v4l2_subdev_video_ops tvp514x_video_ops = { .s_std = tvp514x_s_std, .s_routing = tvp514x_s_routing, .querystd = tvp514x_querystd, - .g_mbus_fmt = tvp514x_mbus_fmt, - .try_mbus_fmt = tvp514x_mbus_fmt, - .s_mbus_fmt = tvp514x_mbus_fmt, .g_parm = tvp514x_g_parm, .s_parm = tvp514x_s_parm, .s_stream = tvp514x_s_stream, diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index f2f87b73184c..e4fa0746f75e 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -828,14 +828,18 @@ static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *f) +static int tvp5150_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *f; struct tvp5150 *decoder = to_tvp5150(sd); - if (f == NULL) + if (!format || format->pad) return -EINVAL; + f = &format->format; + tvp5150_reset(sd, 0); f->width = decoder->rect.width; @@ -1069,9 +1073,6 @@ static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .s_std = tvp5150_s_std, .s_routing = tvp5150_s_routing, - .s_mbus_fmt = tvp5150_mbus_fmt, - .try_mbus_fmt = tvp5150_mbus_fmt, - .g_mbus_fmt = tvp5150_mbus_fmt, .s_crop = tvp5150_s_crop, .g_crop = tvp5150_g_crop, .cropcap = tvp5150_cropcap, @@ -1086,6 +1087,8 @@ static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = { .enum_mbus_code = tvp5150_enum_mbus_code, + .set_fmt = tvp5150_fill_fmt, + .get_fmt = tvp5150_fill_fmt, }; static const struct v4l2_subdev_ops tvp5150_ops = { diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index d21fa1a62e41..05077cffd235 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -610,31 +610,6 @@ static int tvp7002_s_ctrl(struct v4l2_ctrl *ctrl) return -EINVAL; } -/* - * tvp7002_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt - * @sd: pointer to standard V4L2 sub-device structure - * @f: pointer to mediabus format structure - * - * Negotiate the image capture size and mediabus format. - * There is only one possible format, so this single function works for - * get, set and try. - */ -static int tvp7002_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) -{ - struct tvp7002 *device = to_tvp7002(sd); - const struct v4l2_bt_timings *bt = &device->current_timings->timings.bt; - - f->width = bt->width; - f->height = bt->height; - f->code = MEDIA_BUS_FMT_YUYV10_1X20; - f->field = device->current_timings->scanmode; - f->colorspace = device->current_timings->color_space; - - v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d", - f->width, f->height); - return 0; -} - /* * tvp7002_query_dv() - query DV timings * @sd: pointer to standard V4L2 sub-device structure @@ -905,9 +880,6 @@ static const struct v4l2_subdev_video_ops tvp7002_video_ops = { .s_dv_timings = tvp7002_s_dv_timings, .query_dv_timings = tvp7002_query_dv_timings, .s_stream = tvp7002_s_stream, - .g_mbus_fmt = tvp7002_mbus_fmt, - .try_mbus_fmt = tvp7002_mbus_fmt, - .s_mbus_fmt = tvp7002_mbus_fmt, }; /* media pad related operation handlers */ diff --git a/drivers/media/i2c/vs6624.c b/drivers/media/i2c/vs6624.c index b1d0a1b28ca8..59f733524620 100644 --- a/drivers/media/i2c/vs6624.c +++ b/drivers/media/i2c/vs6624.c @@ -649,12 +649,16 @@ static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd, return 0; } -static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int vs6624_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { struct vs6624 *sensor = to_vs6624(sd); - *fmt = sensor->fmt; + if (format->pad) + return -EINVAL; + + format->format = sensor->fmt; return 0; } @@ -741,7 +745,6 @@ static const struct v4l2_subdev_core_ops vs6624_core_ops = { static const struct v4l2_subdev_video_ops vs6624_video_ops = { .try_mbus_fmt = vs6624_try_mbus_fmt, .s_mbus_fmt = vs6624_s_mbus_fmt, - .g_mbus_fmt = vs6624_g_mbus_fmt, .s_parm = vs6624_s_parm, .g_parm = vs6624_g_parm, .s_stream = vs6624_s_stream, @@ -749,6 +752,7 @@ static const struct v4l2_subdev_video_ops vs6624_video_ops = { static const struct v4l2_subdev_pad_ops vs6624_pad_ops = { .enum_mbus_code = vs6624_enum_mbus_code, + .get_fmt = vs6624_get_fmt, }; static const struct v4l2_subdev_ops vs6624_ops = { diff --git a/drivers/media/pci/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c index 594dc3ad4750..22632f9e34e6 100644 --- a/drivers/media/pci/saa7134/saa7134-empress.c +++ b/drivers/media/pci/saa7134/saa7134-empress.c @@ -121,11 +121,14 @@ static int empress_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_dev *dev = video_drvdata(file); - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; - saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt); + saa_call_all(dev, pad, get_fmt, NULL, &fmt); - v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + v4l2_fill_pix_format(&f->fmt.pix, mbus_fmt); f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; f->fmt.pix.bytesperline = 0; diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c index 73359652e486..88712f3247ab 100644 --- a/drivers/media/platform/am437x/am437x-vpfe.c +++ b/drivers/media/platform/am437x/am437x-vpfe.c @@ -1095,7 +1095,7 @@ static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe) * For a given standard, this functions sets up the default * pix format & crop values in the vpfe device and ccdc. It first * starts with defaults based values from the standard table. - * It then checks if sub device support g_mbus_fmt and then override the + * It then checks if sub device supports get_fmt and then override the * values based on that.Sets crop values to match with scan resolution * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the * values in ccdc @@ -1432,8 +1432,8 @@ static int __vpfe_get_format(struct vpfe_device *vpfe, } else { ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, sdinfo->grp_id, - video, g_mbus_fmt, - &mbus_fmt); + pad, get_fmt, + NULL, &fmt); if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) return ret; v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt); diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index ccfcf3f528d3..7767e072d623 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -370,7 +370,7 @@ static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) * For a given standard, this functions sets up the default * pix format & crop values in the vpfe device and ccdc. It first * starts with defaults based values from the standard table. - * It then checks if sub device support g_mbus_fmt and then override the + * It then checks if sub device supports get_fmt and then override the * values based on that.Sets crop values to match with scan resolution * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the * values in ccdc @@ -379,7 +379,10 @@ static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, v4l2_std_id std_id) { struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; int i, ret = 0; @@ -413,26 +416,26 @@ static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, pix->field = V4L2_FIELD_INTERLACED; /* assume V4L2_PIX_FMT_UYVY as default */ pix->pixelformat = V4L2_PIX_FMT_UYVY; - v4l2_fill_mbus_format(&mbus_fmt, pix, + v4l2_fill_mbus_format(mbus_fmt, pix, MEDIA_BUS_FMT_YUYV10_2X10); } else { pix->field = V4L2_FIELD_NONE; /* assume V4L2_PIX_FMT_SBGGR8 */ pix->pixelformat = V4L2_PIX_FMT_SBGGR8; - v4l2_fill_mbus_format(&mbus_fmt, pix, + v4l2_fill_mbus_format(mbus_fmt, pix, MEDIA_BUS_FMT_SBGGR8_1X8); } - /* if sub device supports g_mbus_fmt, override the defaults */ + /* if sub device supports get_fmt, override the defaults */ ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, - sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt); + sdinfo->grp_id, pad, get_fmt, NULL, &fmt); if (ret && ret != -ENOIOCTLCMD) { v4l2_err(&vpfe_dev->v4l2_dev, - "error in getting g_mbus_fmt from sub device\n"); + "error in getting get_fmt from sub device\n"); return ret; } - v4l2_fill_pix_format(pix, &mbus_fmt); + v4l2_fill_pix_format(pix, mbus_fmt); pix->bytesperline = pix->width * 2; pix->sizeimage = pix->bytesperline * pix->height; diff --git a/drivers/media/platform/s5p-tv/hdmi_drv.c b/drivers/media/platform/s5p-tv/hdmi_drv.c index 0e74aabf5f9a..618ecd1d5b27 100644 --- a/drivers/media/platform/s5p-tv/hdmi_drv.c +++ b/drivers/media/platform/s5p-tv/hdmi_drv.c @@ -648,15 +648,20 @@ static int hdmi_g_dv_timings(struct v4l2_subdev *sd, return 0; } -static int hdmi_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int hdmi_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct hdmi_device *hdev = sd_to_hdmi_dev(sd); const struct hdmi_timings *t = hdev->cur_conf; dev_dbg(hdev->dev, "%s\n", __func__); if (!hdev->cur_conf) return -EINVAL; + if (format->pad) + return -EINVAL; + memset(fmt, 0, sizeof(*fmt)); fmt->width = t->hact.end - t->hact.beg; fmt->height = t->vact[0].end - t->vact[0].beg; @@ -712,18 +717,19 @@ static const struct v4l2_subdev_core_ops hdmi_sd_core_ops = { static const struct v4l2_subdev_video_ops hdmi_sd_video_ops = { .s_dv_timings = hdmi_s_dv_timings, .g_dv_timings = hdmi_g_dv_timings, - .g_mbus_fmt = hdmi_g_mbus_fmt, .s_stream = hdmi_s_stream, }; static const struct v4l2_subdev_pad_ops hdmi_sd_pad_ops = { .enum_dv_timings = hdmi_enum_dv_timings, .dv_timings_cap = hdmi_dv_timings_cap, + .get_fmt = hdmi_get_fmt, }; static const struct v4l2_subdev_ops hdmi_sd_ops = { .core = &hdmi_sd_core_ops, .video = &hdmi_sd_video_ops, + .pad = &hdmi_sd_pad_ops, }; static int hdmi_runtime_suspend(struct device *dev) diff --git a/drivers/media/platform/s5p-tv/mixer_drv.c b/drivers/media/platform/s5p-tv/mixer_drv.c index 2a9501d7e7c8..5ef67774971d 100644 --- a/drivers/media/platform/s5p-tv/mixer_drv.c +++ b/drivers/media/platform/s5p-tv/mixer_drv.c @@ -46,11 +46,15 @@ void mxr_get_mbus_fmt(struct mxr_device *mdev, struct v4l2_mbus_framefmt *mbus_fmt) { struct v4l2_subdev *sd; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int ret; mutex_lock(&mdev->mutex); sd = to_outsd(mdev); - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, mbus_fmt); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); + *mbus_fmt = fmt.format; WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name); mutex_unlock(&mdev->mutex); } @@ -62,7 +66,10 @@ void mxr_streamer_get(struct mxr_device *mdev) mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer); if (mdev->n_streamer == 1) { struct v4l2_subdev *sd = to_outsd(mdev); - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; struct mxr_resources *res = &mdev->res; int ret; @@ -72,12 +79,12 @@ void mxr_streamer_get(struct mxr_device *mdev) clk_set_parent(res->sclk_mixer, res->sclk_hdmi); mxr_reg_s_output(mdev, to_output(mdev)->cookie); - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mbus_fmt); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name); ret = v4l2_subdev_call(sd, video, s_stream, 1); WARN(ret, "starting stream failed for output %s\n", sd->name); - mxr_reg_set_mbus_fmt(mdev, &mbus_fmt); + mxr_reg_set_mbus_fmt(mdev, mbus_fmt); mxr_reg_streamon(mdev); ret = mxr_reg_wait4vsync(mdev); WARN(ret, "failed to get vsync (%d) from output\n", ret); diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c index 3621af91d460..c75d4354d182 100644 --- a/drivers/media/platform/s5p-tv/sdo_drv.c +++ b/drivers/media/platform/s5p-tv/sdo_drv.c @@ -160,13 +160,17 @@ static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std) return 0; } -static int sdo_g_mbus_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt) +static int sdo_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { + struct v4l2_mbus_framefmt *fmt = &format->format; struct sdo_device *sdev = sd_to_sdev(sd); if (!sdev->fmt) return -ENXIO; + if (format->pad) + return -EINVAL; /* all modes are 720 pixels wide */ fmt->width = 720; fmt->height = sdev->fmt->height; @@ -256,13 +260,17 @@ static const struct v4l2_subdev_video_ops sdo_sd_video_ops = { .s_std_output = sdo_s_std_output, .g_std_output = sdo_g_std_output, .g_tvnorms_output = sdo_g_tvnorms_output, - .g_mbus_fmt = sdo_g_mbus_fmt, .s_stream = sdo_s_stream, }; +static const struct v4l2_subdev_pad_ops sdo_sd_pad_ops = { + .get_fmt = sdo_get_fmt, +}; + static const struct v4l2_subdev_ops sdo_sd_ops = { .core = &sdo_sd_core_ops, .video = &sdo_sd_video_ops, + .pad = &sdo_sd_pad_ops, }; static int sdo_runtime_suspend(struct device *dev) diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index b891b7f2b7e9..a1b426458719 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -912,7 +912,10 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd, struct v4l2_crop a_writable = *a; struct v4l2_rect *rect = &a_writable.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; int ret; soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); @@ -923,15 +926,15 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd, return ret; /* The capture device might have changed its output */ - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; dev_dbg(icd->parent, "Sensor cropped %dx%d\n", - mf.width, mf.height); + mf->width, mf->height); - icd->user_width = mf.width; - icd->user_height = mf.height; + icd->user_width = mf->width; + icd->user_height = mf->height; return ret; } diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index a29848976f92..6c34dbb878b2 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -804,7 +804,10 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; int ret; soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); @@ -815,30 +818,30 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, return ret; /* The capture device might have changed its output sizes */ - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; - if (mf.code != icd->current_fmt->code) + if (mf->code != icd->current_fmt->code) return -EINVAL; - if (mf.width & 7) { + if (mf->width & 7) { /* Ouch! We can only handle 8-byte aligned width... */ - stride_align(&mf.width); - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + stride_align(&mf->width); + ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); if (ret < 0) return ret; } - if (mf.width != icd->user_width || mf.height != icd->user_height) - configure_geometry(mx3_cam, mf.width, mf.height, + if (mf->width != icd->user_width || mf->height != icd->user_height) + configure_geometry(mx3_cam, mf->width, mf->height, icd->current_fmt->host_fmt); dev_dbg(icd->parent, "Sensor cropped %dx%d\n", - mf.width, mf.height); + mf->width, mf->height); - icd->user_width = mf.width; - icd->user_height = mf.height; + icd->user_width = mf->width; + icd->user_height = mf->height; return ret; } diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index 3f250767d162..6663645d1be4 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1224,7 +1224,10 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd, struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; int ret; ret = subdev_call_with_sense(pcdev, dev, icd, sd, s_crop, crop); @@ -1234,32 +1237,32 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd, return ret; } - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) { dev_warn(dev, "%s: failed to fetch current format\n", __func__); return ret; } - ret = dma_align(&mf.width, &mf.height, xlate->host_fmt, pcdev->vb_mode, + ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode, false); if (ret < 0) { dev_err(dev, "%s: failed to align %ux%u %s with DMA\n", - __func__, mf.width, mf.height, + __func__, mf->width, mf->height, xlate->host_fmt->name); return ret; } if (!ret) { /* sensor returned geometry not DMA aligned, trying to fix */ - ret = set_mbus_format(pcdev, dev, icd, sd, &mf, xlate); + ret = set_mbus_format(pcdev, dev, icd, sd, mf, xlate); if (ret < 0) { dev_err(dev, "%s: failed to set format\n", __func__); return ret; } } - icd->user_width = mf.width; - icd->user_height = mf.height; + icd->user_width = mf->width; + icd->user_height = mf->height; return 0; } diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c index f6fa0acc5251..48999f3cb2bb 100644 --- a/drivers/media/platform/soc_camera/pxa_camera.c +++ b/drivers/media/platform/soc_camera/pxa_camera.c @@ -1349,7 +1349,10 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, .master_clock = pcdev->mclk, .pixel_clock_max = pcdev->ciclk / 4, }; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; struct pxa_cam *cam = icd->host_priv; u32 fourcc = icd->current_fmt->host_fmt->fourcc; int ret; @@ -1368,23 +1371,23 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, return ret; } - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; - if (pxa_camera_check_frame(mf.width, mf.height)) { + if (pxa_camera_check_frame(mf->width, mf->height)) { /* * Camera cropping produced a frame beyond our capabilities. * FIXME: just extract a subframe, that we can process. */ - v4l_bound_align_image(&mf.width, 48, 2048, 1, - &mf.height, 32, 2048, 0, + v4l_bound_align_image(&mf->width, 48, 2048, 1, + &mf->height, 32, 2048, 0, fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); if (ret < 0) return ret; - if (pxa_camera_check_frame(mf.width, mf.height)) { + if (pxa_camera_check_frame(mf->width, mf->height)) { dev_warn(icd->parent, "Inconsistent state. Use S_FMT to repair\n"); return -EINVAL; @@ -1401,8 +1404,8 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, recalculate_fifo_timeout(pcdev, sense.pixel_clock); } - icd->user_width = mf.width; - icd->user_height = mf.height; + icd->user_width = mf->width; + icd->user_height = mf->height; pxa_camera_setup_cicr(icd, cam->flags, fourcc); diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 8796bdce671f..08fa61099dde 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -1339,12 +1339,15 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, return 0; if (!icd->host_priv) { - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; struct v4l2_rect rect; struct device *dev = icd->parent; int shift; - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; @@ -1354,8 +1357,8 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, /* Sensor driver doesn't support cropping */ rect.left = 0; rect.top = 0; - rect.width = mf.width; - rect.height = mf.height; + rect.width = mf->width; + rect.height = mf->height; } else if (ret < 0) { return ret; } @@ -1365,16 +1368,16 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, * 1280x960, 640x480, 320x240 */ for (shift = 0; shift < 3; shift++) { - if (mf.width <= VIN_MAX_WIDTH && - mf.height <= VIN_MAX_HEIGHT) + if (mf->width <= VIN_MAX_WIDTH && + mf->height <= VIN_MAX_HEIGHT) break; - mf.width = 1280 >> shift; - mf.height = 960 >> shift; + mf->width = 1280 >> shift; + mf->height = 960 >> shift; ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), video, s_mbus_fmt, - &mf); + mf); if (ret < 0) return ret; } @@ -1382,11 +1385,11 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, if (shift == 3) { dev_err(dev, "Failed to configure the client below %ux%u\n", - mf.width, mf.height); + mf->width, mf->height); return -EIO; } - dev_dbg(dev, "camera fmt %ux%u\n", mf.width, mf.height); + dev_dbg(dev, "camera fmt %ux%u\n", mf->width, mf->height); cam = kzalloc(sizeof(*cam), GFP_KERNEL); if (!cam) @@ -1397,10 +1400,10 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, */ cam->rect = rect; cam->subrect = rect; - cam->width = mf.width; - cam->height = mf.height; - cam->out_width = mf.width; - cam->out_height = mf.height; + cam->width = mf->width; + cam->height = mf->height; + cam->out_width = mf->width; + cam->out_height = mf->height; icd->host_priv = cam; } else { @@ -1468,7 +1471,10 @@ static int rcar_vin_set_crop(struct soc_camera_device *icd, struct v4l2_rect *cam_rect = &cam_crop.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; u32 vnmc; int ret, i; @@ -1492,16 +1498,16 @@ static int rcar_vin_set_crop(struct soc_camera_device *icd, /* On success cam_crop contains current camera crop */ /* Retrieve camera output window */ - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; - if (mf.width > VIN_MAX_WIDTH || mf.height > VIN_MAX_HEIGHT) + if (mf->width > VIN_MAX_WIDTH || mf->height > VIN_MAX_HEIGHT) return -EINVAL; /* Cache camera output window */ - cam->width = mf.width; - cam->height = mf.height; + cam->width = mf->width; + cam->height = mf->height; icd->user_width = cam->width; icd->user_height = cam->height; diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index b4faf8f1fd15..566fd74c4639 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1073,7 +1073,10 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int } if (!icd->host_priv) { - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; struct v4l2_rect rect; int shift = 0; @@ -1091,7 +1094,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int return ret; /* First time */ - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; @@ -1102,14 +1105,14 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int * sizes, just try VGA multiples. If needed, this can be * adjusted in the future. */ - while ((mf.width > pcdev->max_width || - mf.height > pcdev->max_height) && shift < 4) { + while ((mf->width > pcdev->max_width || + mf->height > pcdev->max_height) && shift < 4) { /* Try 2560x1920, 1280x960, 640x480, 320x240 */ - mf.width = 2560 >> shift; - mf.height = 1920 >> shift; + mf->width = 2560 >> shift; + mf->height = 1920 >> shift; ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), video, - s_mbus_fmt, &mf); + s_mbus_fmt, mf); if (ret < 0) return ret; shift++; @@ -1117,11 +1120,11 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int if (shift == 4) { dev_err(dev, "Failed to configure the client below %ux%x\n", - mf.width, mf.height); + mf->width, mf->height); return -EIO; } - dev_geo(dev, "camera fmt %ux%u\n", mf.width, mf.height); + dev_geo(dev, "camera fmt %ux%u\n", mf->width, mf->height); cam = kzalloc(sizeof(*cam), GFP_KERNEL); if (!cam) @@ -1131,8 +1134,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int cam->rect = rect; cam->subrect = rect; - cam->width = mf.width; - cam->height = mf.height; + cam->width = mf->width; + cam->height = mf->height; icd->host_priv = cam; } else { @@ -1217,7 +1220,10 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_rect *cam_rect = &cam_crop.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v, out_width, out_height; int interm_width, interm_height; @@ -1247,16 +1253,16 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, /* On success cam_crop contains current camera crop */ /* 3. Retrieve camera output window */ - ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); if (ret < 0) return ret; - if (mf.width > pcdev->max_width || mf.height > pcdev->max_height) + if (mf->width > pcdev->max_width || mf->height > pcdev->max_height) return -EINVAL; /* 4. Calculate camera scales */ - scale_cam_h = calc_generic_scale(cam_rect->width, mf.width); - scale_cam_v = calc_generic_scale(cam_rect->height, mf.height); + scale_cam_h = calc_generic_scale(cam_rect->width, mf->width); + scale_cam_v = calc_generic_scale(cam_rect->height, mf->height); /* Calculate intermediate window */ interm_width = scale_down(rect->width, scale_cam_h); @@ -1267,7 +1273,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, new_scale_h = calc_generic_scale(rect->width, icd->user_width); - mf.width = scale_down(cam_rect->width, new_scale_h); + mf->width = scale_down(cam_rect->width, new_scale_h); } if (interm_height < icd->user_height) { @@ -1275,26 +1281,26 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, new_scale_v = calc_generic_scale(rect->height, icd->user_height); - mf.height = scale_down(cam_rect->height, new_scale_v); + mf->height = scale_down(cam_rect->height, new_scale_v); } if (interm_width < icd->user_width || interm_height < icd->user_height) { ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), video, - s_mbus_fmt, &mf); + s_mbus_fmt, mf); if (ret < 0) return ret; - dev_geo(dev, "New camera output %ux%u\n", mf.width, mf.height); - scale_cam_h = calc_generic_scale(cam_rect->width, mf.width); - scale_cam_v = calc_generic_scale(cam_rect->height, mf.height); + dev_geo(dev, "New camera output %ux%u\n", mf->width, mf->height); + scale_cam_h = calc_generic_scale(cam_rect->width, mf->width); + scale_cam_v = calc_generic_scale(cam_rect->height, mf->height); interm_width = scale_down(rect->width, scale_cam_h); interm_height = scale_down(rect->height, scale_cam_v); } /* Cache camera output window */ - cam->width = mf.width; - cam->height = mf.height; + cam->width = mf->width; + cam->height = mf->height; if (pcdev->image_mode) { out_width = min(interm_width, icd->user_width); diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c index 7fd49cb009d3..d708df410f74 100644 --- a/drivers/media/platform/soc_camera/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -1289,7 +1289,10 @@ static struct soc_camera_device *soc_camera_add_pdev(struct soc_camera_async_cli static int soc_camera_probe_finish(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &fmt.format; int ret; sd->grp_id = soc_camera_grp_id(icd); @@ -1319,11 +1322,11 @@ static int soc_camera_probe_finish(struct soc_camera_device *icd) goto evidstart; /* Try to improve our guess of a reasonable window format */ - if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) { - icd->user_width = mf.width; - icd->user_height = mf.height; - icd->colorspace = mf.colorspace; - icd->field = mf.field; + if (!v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt)) { + icd->user_width = mf->width; + icd->user_height = mf->height; + icd->colorspace = mf->colorspace; + icd->field = mf->field; } soc_camera_remove_device(icd); diff --git a/drivers/media/platform/soc_camera/soc_camera_platform.c b/drivers/media/platform/soc_camera/soc_camera_platform.c index 934b9183cea8..cc8eb0758219 100644 --- a/drivers/media/platform/soc_camera/soc_camera_platform.c +++ b/drivers/media/platform/soc_camera/soc_camera_platform.c @@ -37,9 +37,11 @@ static int soc_camera_platform_s_stream(struct v4l2_subdev *sd, int enable) } static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) { struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *mf = &format->format; mf->width = p->format.width; mf->height = p->format.height; @@ -120,14 +122,13 @@ static struct v4l2_subdev_video_ops platform_subdev_video_ops = { .s_stream = soc_camera_platform_s_stream, .cropcap = soc_camera_platform_cropcap, .g_crop = soc_camera_platform_g_crop, - .try_mbus_fmt = soc_camera_platform_fill_fmt, - .g_mbus_fmt = soc_camera_platform_fill_fmt, - .s_mbus_fmt = soc_camera_platform_fill_fmt, .g_mbus_config = soc_camera_platform_g_mbus_config, }; static const struct v4l2_subdev_pad_ops platform_subdev_pad_ops = { .enum_mbus_code = soc_camera_platform_enum_mbus_code, + .get_fmt = soc_camera_platform_fill_fmt, + .set_fmt = soc_camera_platform_fill_fmt, }; static struct v4l2_subdev_ops platform_subdev_ops = { diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index c2eed99ebc78..67a8e4e58d9a 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -293,8 +293,6 @@ struct v4l2_mbus_frame_desc { g_dv_timings(): Get custom dv timings in the sub device. - g_mbus_fmt: get the current pixel format, provided by a video data source - try_mbus_fmt: try to set a pixel format on a video data source s_mbus_fmt: set a pixel format on a video data source @@ -336,8 +334,6 @@ struct v4l2_subdev_video_ops { struct v4l2_dv_timings *timings); int (*query_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); - int (*g_mbus_fmt)(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt); int (*try_mbus_fmt)(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt); int (*s_mbus_fmt)(struct v4l2_subdev *sd, -- cgit v1.2.3 From ebf984bb151e9952cccd060d3aba0b4d30a87e81 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 9 Apr 2015 04:05:59 -0300 Subject: [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers Replace all calls to s_mbus_fmt in bridge drivers by calls to the set_fmt pad op. Remove the old try/s_mbus_fmt video ops since they are now no longer used. Signed-off-by: Hans Verkuil Cc: Guennadi Liakhovetski Acked-by: Prabhakar Lad Acked-by: Scott Jiang Cc: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx18/cx18-controls.c | 13 +++-- drivers/media/pci/cx18/cx18-ioctl.c | 12 +++-- drivers/media/pci/cx23885/cx23885-video.c | 12 +++-- drivers/media/pci/ivtv/ivtv-controls.c | 12 +++-- drivers/media/pci/ivtv/ivtv-ioctl.c | 12 +++-- drivers/media/pci/saa7134/saa7134-empress.c | 10 ++-- drivers/media/platform/am437x/am437x-vpfe.c | 19 ++----- drivers/media/platform/blackfin/bfin_capture.c | 8 +-- drivers/media/platform/marvell-ccic/mcam-core.c | 8 +-- drivers/media/platform/sh_vou.c | 61 ++++++++++++---------- drivers/media/platform/soc_camera/atmel-isi.c | 27 +++++----- drivers/media/platform/soc_camera/mx2_camera.c | 35 +++++++------ drivers/media/platform/soc_camera/mx3_camera.c | 31 ++++++----- drivers/media/platform/soc_camera/omap1_camera.c | 44 +++++++++------- drivers/media/platform/soc_camera/pxa_camera.c | 33 ++++++------ drivers/media/platform/soc_camera/rcar_vin.c | 4 +- .../platform/soc_camera/sh_mobile_ceu_camera.c | 8 +-- drivers/media/platform/soc_camera/soc_scale_crop.c | 37 +++++++------ drivers/media/platform/via-camera.c | 8 +-- drivers/media/usb/cx231xx/cx231xx-417.c | 12 +++-- drivers/media/usb/cx231xx/cx231xx-video.c | 23 ++++---- drivers/media/usb/em28xx/em28xx-camera.c | 12 +++-- drivers/media/usb/go7007/go7007-v4l2.c | 12 +++-- drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 17 +++--- include/media/v4l2-subdev.h | 8 --- 25 files changed, 256 insertions(+), 222 deletions(-) (limited to 'include') diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c index 4aeb7c6b8ce1..71227a155cba 100644 --- a/drivers/media/pci/cx18/cx18-controls.c +++ b/drivers/media/pci/cx18/cx18-controls.c @@ -93,13 +93,16 @@ static int cx18_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) { struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; - struct v4l2_mbus_framefmt fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *fmt = &format.format; /* fix videodecoder resolution */ - fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); - fmt.height = cxhdl->height; - fmt.code = MEDIA_BUS_FMT_FIXED; - v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt); + fmt->width = cxhdl->width / (is_mpeg1 ? 2 : 1); + fmt->height = cxhdl->height; + fmt->code = MEDIA_BUS_FMT_FIXED; + v4l2_subdev_call(cx->sd_av, pad, set_fmt, NULL, &format); return 0; } diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c index 79aee30d5fd8..55525af1f482 100644 --- a/drivers/media/pci/cx18/cx18-ioctl.c +++ b/drivers/media/pci/cx18/cx18-ioctl.c @@ -267,7 +267,9 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, { struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; struct cx18_stream *s = &cx->streams[id->type]; int ret; int w, h; @@ -296,10 +298,10 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, s->vb_bytes_per_line = 1440; /* Packed */ } - mbus_fmt.width = cx->cxhdl.width = w; - mbus_fmt.height = cx->cxhdl.height = h; - mbus_fmt.code = MEDIA_BUS_FMT_FIXED; - v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt); + format.format.width = cx->cxhdl.width = w; + format.format.height = cx->cxhdl.height = h; + format.format.code = MEDIA_BUS_FMT_FIXED; + v4l2_subdev_call(cx->sd_av, pad, set_fmt, NULL, &format); return cx18_g_fmt_vid_cap(file, fh, fmt); } diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c index 2232b389c441..ec76470d12a4 100644 --- a/drivers/media/pci/cx23885/cx23885-video.c +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -581,7 +581,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct cx23885_dev *dev = video_drvdata(file); - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int err; dprintk(2, "%s()\n", __func__); @@ -600,10 +602,10 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, dev->field = f->fmt.pix.field; dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, dev->width, dev->height, dev->field); - v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); - call_all(dev, video, s_mbus_fmt, &mbus_fmt); - v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); - /* s_mbus_fmt overwrites f->fmt.pix.field, restore it */ + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); + call_all(dev, pad, set_fmt, NULL, &format); + v4l2_fill_pix_format(&f->fmt.pix, &format.format); + /* set_fmt overwrites f->fmt.pix.field, restore it */ f->fmt.pix.field = dev->field; return 0; } diff --git a/drivers/media/pci/ivtv/ivtv-controls.c b/drivers/media/pci/ivtv/ivtv-controls.c index ccf548c255f1..8a55ccb8f0c9 100644 --- a/drivers/media/pci/ivtv/ivtv-controls.c +++ b/drivers/media/pci/ivtv/ivtv-controls.c @@ -64,13 +64,15 @@ static int ivtv_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) { struct ivtv *itv = container_of(cxhdl, struct ivtv, cxhdl); int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; - struct v4l2_mbus_framefmt fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; /* fix videodecoder resolution */ - fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); - fmt.height = cxhdl->height; - fmt.code = MEDIA_BUS_FMT_FIXED; - v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &fmt); + format.format.width = cxhdl->width / (is_mpeg1 ? 2 : 1); + format.format.height = cxhdl->height; + format.format.code = MEDIA_BUS_FMT_FIXED; + v4l2_subdev_call(itv->sd_video, pad, set_fmt, NULL, &format); return 0; } diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c index 6fe6c4a0e858..10c31cd43e03 100644 --- a/drivers/media/pci/ivtv/ivtv-ioctl.c +++ b/drivers/media/pci/ivtv/ivtv-ioctl.c @@ -581,7 +581,9 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f { struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; @@ -599,10 +601,10 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f itv->cxhdl.height = h; if (v4l2_ctrl_g_ctrl(itv->cxhdl.video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) fmt->fmt.pix.width /= 2; - mbus_fmt.width = fmt->fmt.pix.width; - mbus_fmt.height = h; - mbus_fmt.code = MEDIA_BUS_FMT_FIXED; - v4l2_subdev_call(itv->sd_video, video, s_mbus_fmt, &mbus_fmt); + format.format.width = fmt->fmt.pix.width; + format.format.height = h; + format.format.code = MEDIA_BUS_FMT_FIXED; + v4l2_subdev_call(itv->sd_video, pad, set_fmt, NULL, &format); return ivtv_g_fmt_vid_cap(file, fh, fmt); } diff --git a/drivers/media/pci/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c index dc14930be909..c9118e0cbe00 100644 --- a/drivers/media/pci/saa7134/saa7134-empress.c +++ b/drivers/media/pci/saa7134/saa7134-empress.c @@ -140,11 +140,13 @@ static int empress_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_dev *dev = video_drvdata(file); - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; - v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); - saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt); - v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); + saa_call_all(dev, pad, set_fmt, NULL, &format); + v4l2_fill_pix_format(&f->fmt.pix, &format.format); f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c index 88712f3247ab..ea971bb0d9c6 100644 --- a/drivers/media/platform/am437x/am437x-vpfe.c +++ b/drivers/media/platform/am437x/am437x-vpfe.c @@ -1455,7 +1455,6 @@ static int __vpfe_get_format(struct vpfe_device *vpfe, static int __vpfe_set_format(struct vpfe_device *vpfe, struct v4l2_format *format, unsigned int *bpp) { - struct v4l2_mbus_framefmt mbus_fmt; struct vpfe_subdev_info *sdinfo; struct v4l2_subdev_format fmt; int ret; @@ -1472,23 +1471,11 @@ static int __vpfe_set_format(struct vpfe_device *vpfe, pix_to_mbus(vpfe, &format->fmt.pix, &fmt.format); ret = v4l2_subdev_call(sdinfo->sd, pad, set_fmt, NULL, &fmt); - if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) + if (ret) return ret; - if (!ret) { - v4l2_fill_pix_format(&format->fmt.pix, &fmt.format); - mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp); - } else { - ret = v4l2_device_call_until_err(&vpfe->v4l2_dev, - sdinfo->grp_id, - video, s_mbus_fmt, - &mbus_fmt); - if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) - return ret; - - v4l2_fill_pix_format(&format->fmt.pix, &mbus_fmt); - mbus_to_pix(vpfe, &mbus_fmt, &format->fmt.pix, bpp); - } + v4l2_fill_pix_format(&format->fmt.pix, &fmt.format); + mbus_to_pix(vpfe, &fmt.format, &format->fmt.pix, bpp); format->type = vpfe->fmt.type; diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c index aa50eba623c3..b7e70fb05eb8 100644 --- a/drivers/media/platform/blackfin/bfin_capture.c +++ b/drivers/media/platform/blackfin/bfin_capture.c @@ -674,7 +674,9 @@ static int bcap_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *fmt) { struct bcap_device *bcap_dev = video_drvdata(file); - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; struct bcap_format bcap_fmt; struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; int ret; @@ -687,8 +689,8 @@ static int bcap_s_fmt_vid_cap(struct file *file, void *priv, if (ret < 0) return ret; - v4l2_fill_mbus_format(&mbus_fmt, pixfmt, bcap_fmt.mbus_code); - ret = v4l2_subdev_call(bcap_dev->sd, video, s_mbus_fmt, &mbus_fmt); + v4l2_fill_mbus_format(&format.format, pixfmt, bcap_fmt.mbus_code); + ret = v4l2_subdev_call(bcap_dev->sd, pad, set_fmt, NULL, &format); if (ret < 0) return ret; bcap_dev->fmt = *pixfmt; diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index c2ebc12917a7..2707de8f6245 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -979,13 +979,15 @@ static int mcam_cam_set_flip(struct mcam_camera *cam) static int mcam_cam_configure(struct mcam_camera *cam) { - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int ret; - v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code); + v4l2_fill_mbus_format(&format.format, &cam->pix_format, cam->mbus_code); ret = sensor_call(cam, core, init, 0); if (ret == 0) - ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt); + ret = sensor_call(cam, pad, set_fmt, NULL, &format); /* * OV7670 does weird things if flip is set *before* format... */ diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c index dde1ccc730be..829e85c26610 100644 --- a/drivers/media/platform/sh_vou.c +++ b/drivers/media/platform/sh_vou.c @@ -679,12 +679,14 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, unsigned int img_height_max; int pix_idx; struct sh_vou_geometry geo; - struct v4l2_mbus_framefmt mbfmt = { + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, /* Revisit: is this the correct code? */ - .code = MEDIA_BUS_FMT_YUYV8_2X8, - .field = V4L2_FIELD_INTERLACED, - .colorspace = V4L2_COLORSPACE_SMPTE170M, + .format.code = MEDIA_BUS_FMT_YUYV8_2X8, + .format.field = V4L2_FIELD_INTERLACED, + .format.colorspace = V4L2_COLORSPACE_SMPTE170M, }; + struct v4l2_mbus_framefmt *mbfmt = &format.format; int ret; dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__, @@ -720,27 +722,27 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, vou_adjust_output(&geo, vou_dev->std); - mbfmt.width = geo.output.width; - mbfmt.height = geo.output.height; - ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video, - s_mbus_fmt, &mbfmt); + mbfmt->width = geo.output.width; + mbfmt->height = geo.output.height; + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad, + set_fmt, NULL, &format); /* Must be implemented, so, don't check for -ENOIOCTLCMD */ if (ret < 0) return ret; dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__, - geo.output.width, geo.output.height, mbfmt.width, mbfmt.height); + geo.output.width, geo.output.height, mbfmt->width, mbfmt->height); /* Sanity checks */ - if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH || - (unsigned)mbfmt.height > img_height_max || - mbfmt.code != MEDIA_BUS_FMT_YUYV8_2X8) + if ((unsigned)mbfmt->width > VOU_MAX_IMAGE_WIDTH || + (unsigned)mbfmt->height > img_height_max || + mbfmt->code != MEDIA_BUS_FMT_YUYV8_2X8) return -EIO; - if (mbfmt.width != geo.output.width || - mbfmt.height != geo.output.height) { - geo.output.width = mbfmt.width; - geo.output.height = mbfmt.height; + if (mbfmt->width != geo.output.width || + mbfmt->height != geo.output.height) { + geo.output.width = mbfmt->width; + geo.output.height = mbfmt->height; vou_adjust_input(&geo, vou_dev->std); } @@ -942,11 +944,12 @@ static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a) struct v4l2_crop sd_crop = {.type = V4L2_BUF_TYPE_VIDEO_OUTPUT}; struct v4l2_pix_format *pix = &vou_dev->pix; struct sh_vou_geometry geo; - struct v4l2_mbus_framefmt mbfmt = { + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, /* Revisit: is this the correct code? */ - .code = MEDIA_BUS_FMT_YUYV8_2X8, - .field = V4L2_FIELD_INTERLACED, - .colorspace = V4L2_COLORSPACE_SMPTE170M, + .format.code = MEDIA_BUS_FMT_YUYV8_2X8, + .format.field = V4L2_FIELD_INTERLACED, + .format.colorspace = V4L2_COLORSPACE_SMPTE170M, }; unsigned int img_height_max; int ret; @@ -984,22 +987,22 @@ static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a) */ v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video, s_crop, &sd_crop); - mbfmt.width = geo.output.width; - mbfmt.height = geo.output.height; - ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video, - s_mbus_fmt, &mbfmt); + format.format.width = geo.output.width; + format.format.height = geo.output.height; + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad, + set_fmt, NULL, &format); /* Must be implemented, so, don't check for -ENOIOCTLCMD */ if (ret < 0) return ret; /* Sanity checks */ - if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH || - (unsigned)mbfmt.height > img_height_max || - mbfmt.code != MEDIA_BUS_FMT_YUYV8_2X8) + if ((unsigned)format.format.width > VOU_MAX_IMAGE_WIDTH || + (unsigned)format.format.height > img_height_max || + format.format.code != MEDIA_BUS_FMT_YUYV8_2X8) return -EIO; - geo.output.width = mbfmt.width; - geo.output.height = mbfmt.height; + geo.output.width = format.format.width; + geo.output.height = format.format.height; /* * No down-scaling. According to the API, current call has precedence: diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 903dbf27d0e0..287902681164 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -487,7 +487,10 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &format.format; int ret; xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); @@ -500,27 +503,27 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, dev_dbg(icd->parent, "Plan to set format %dx%d\n", pix->width, pix->height); - mf.width = pix->width; - mf.height = pix->height; - mf.field = pix->field; - mf.colorspace = pix->colorspace; - mf.code = xlate->code; + mf->width = pix->width; + mf->height = pix->height; + mf->field = pix->field; + mf->colorspace = pix->colorspace; + mf->code = xlate->code; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format); if (ret < 0) return ret; - if (mf.code != xlate->code) + if (mf->code != xlate->code) return -EINVAL; ret = configure_geometry(isi, pix->width, pix->height, xlate->code); if (ret < 0) return ret; - pix->width = mf.width; - pix->height = mf.height; - pix->field = mf.field; - pix->colorspace = mf.colorspace; + pix->width = mf->width; + pix->height = mf->height; + pix->field = mf->field; + pix->colorspace = mf->colorspace; icd->current_fmt = xlate; dev_dbg(icd->parent, "Finally set format %dx%d\n", diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index d45f50a3a9eb..ea4c423f0cf8 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -1127,7 +1127,10 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &format.format; int ret; dev_dbg(icd->parent, "%s: requested params: width = %d, height = %d\n", @@ -1140,19 +1143,19 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, return -EINVAL; } - mf.width = pix->width; - mf.height = pix->height; - mf.field = pix->field; - mf.colorspace = pix->colorspace; - mf.code = xlate->code; + mf->width = pix->width; + mf->height = pix->height; + mf->field = pix->field; + mf->colorspace = pix->colorspace; + mf->code = xlate->code; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format); if (ret < 0 && ret != -ENOIOCTLCMD) return ret; /* Store width and height returned by the sensor for resizing */ - pcdev->s_width = mf.width; - pcdev->s_height = mf.height; + pcdev->s_width = mf->width; + pcdev->s_height = mf->height; dev_dbg(icd->parent, "%s: sensor params: width = %d, height = %d\n", __func__, pcdev->s_width, pcdev->s_height); @@ -1160,19 +1163,19 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, xlate->host_fmt->fourcc); memset(pcdev->resizing, 0, sizeof(pcdev->resizing)); - if ((mf.width != pix->width || mf.height != pix->height) && + if ((mf->width != pix->width || mf->height != pix->height) && pcdev->emma_prp->cfg.in_fmt == PRP_CNTL_DATA_IN_YUV422) { - if (mx2_emmaprp_resize(pcdev, &mf, pix, true) < 0) + if (mx2_emmaprp_resize(pcdev, mf, pix, true) < 0) dev_dbg(icd->parent, "%s: can't resize\n", __func__); } - if (mf.code != xlate->code) + if (mf->code != xlate->code) return -EINVAL; - pix->width = mf.width; - pix->height = mf.height; - pix->field = mf.field; - pix->colorspace = mf.colorspace; + pix->width = mf->width; + pix->height = mf->height; + pix->field = mf->field; + pix->colorspace = mf->colorspace; icd->current_fmt = xlate; dev_dbg(icd->parent, "%s: returned params: width = %d, height = %d\n", diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index f63501771072..ace41f53caca 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -828,7 +828,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, if (mf->width & 7) { /* Ouch! We can only handle 8-byte aligned width... */ stride_align(&mf->width); - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &fmt); if (ret < 0) return ret; } @@ -854,7 +854,10 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &format.format; int ret; xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); @@ -875,17 +878,17 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, configure_geometry(mx3_cam, pix->width, pix->height, xlate->host_fmt); - mf.width = pix->width; - mf.height = pix->height; - mf.field = pix->field; - mf.colorspace = pix->colorspace; - mf.code = xlate->code; + mf->width = pix->width; + mf->height = pix->height; + mf->field = pix->field; + mf->colorspace = pix->colorspace; + mf->code = xlate->code; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format); if (ret < 0) return ret; - if (mf.code != xlate->code) + if (mf->code != xlate->code) return -EINVAL; if (!mx3_cam->idmac_channel[0]) { @@ -894,11 +897,11 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, return ret; } - pix->width = mf.width; - pix->height = mf.height; - pix->field = mf.field; - mx3_cam->field = mf.field; - pix->colorspace = mf.colorspace; + pix->width = mf->width; + pix->height = mf->height; + pix->field = mf->field; + mx3_cam->field = mf->field; + pix->colorspace = mf->colorspace; icd->current_fmt = xlate; dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height); diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index 2a715e1e22de..ba8dcd11ae0e 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1157,7 +1157,7 @@ static int dma_align(int *width, int *height, return 1; } -#define subdev_call_with_sense(pcdev, dev, icd, sd, function, args...) \ +#define subdev_call_with_sense(pcdev, dev, icd, sd, op, function, args...) \ ({ \ struct soc_camera_sense sense = { \ .master_clock = pcdev->camexclk, \ @@ -1168,7 +1168,7 @@ static int dma_align(int *width, int *height, if (pcdev->pdata) \ sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000; \ icd->sense = &sense; \ - __ret = v4l2_subdev_call(sd, video, function, ##args); \ + __ret = v4l2_subdev_call(sd, op, function, ##args); \ icd->sense = NULL; \ \ if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { \ @@ -1182,16 +1182,17 @@ static int dma_align(int *width, int *height, __ret; \ }) -static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev, +static int set_format(struct omap1_cam_dev *pcdev, struct device *dev, struct soc_camera_device *icd, struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf, + struct v4l2_subdev_format *format, const struct soc_camera_format_xlate *xlate) { s32 bytes_per_line; - int ret = subdev_call_with_sense(pcdev, dev, icd, sd, s_mbus_fmt, mf); + struct v4l2_mbus_framefmt *mf = &format->format; + int ret = subdev_call_with_sense(pcdev, dev, icd, sd, pad, set_fmt, NULL, format); if (ret < 0) { - dev_err(dev, "%s: s_mbus_fmt failed\n", __func__); + dev_err(dev, "%s: set_fmt failed\n", __func__); return ret; } @@ -1230,7 +1231,7 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd, struct v4l2_mbus_framefmt *mf = &fmt.format; int ret; - ret = subdev_call_with_sense(pcdev, dev, icd, sd, s_crop, crop); + ret = subdev_call_with_sense(pcdev, dev, icd, sd, video, s_crop, crop); if (ret < 0) { dev_warn(dev, "%s: failed to crop to %ux%u@%u:%u\n", __func__, rect->width, rect->height, rect->left, rect->top); @@ -1254,7 +1255,7 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd, if (!ret) { /* sensor returned geometry not DMA aligned, trying to fix */ - ret = set_mbus_format(pcdev, dev, icd, sd, mf, xlate); + ret = set_format(pcdev, dev, icd, sd, &fmt, xlate); if (ret < 0) { dev_err(dev, "%s: failed to set format\n", __func__); return ret; @@ -1276,7 +1277,10 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd, struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &format.format; int ret; xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); @@ -1286,13 +1290,13 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd, return -EINVAL; } - mf.width = pix->width; - mf.height = pix->height; - mf.field = pix->field; - mf.colorspace = pix->colorspace; - mf.code = xlate->code; + mf->width = pix->width; + mf->height = pix->height; + mf->field = pix->field; + mf->colorspace = pix->colorspace; + mf->code = xlate->code; - ret = dma_align(&mf.width, &mf.height, xlate->host_fmt, pcdev->vb_mode, + ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode, true); if (ret < 0) { dev_err(dev, "%s: failed to align %ux%u %s with DMA\n", @@ -1301,16 +1305,16 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd, return ret; } - ret = set_mbus_format(pcdev, dev, icd, sd, &mf, xlate); + ret = set_format(pcdev, dev, icd, sd, &format, xlate); if (ret < 0) { dev_err(dev, "%s: failed to set format\n", __func__); return ret; } - pix->width = mf.width; - pix->height = mf.height; - pix->field = mf.field; - pix->colorspace = mf.colorspace; + pix->width = mf->width; + pix->height = mf->height; + pix->field = mf->field; + pix->colorspace = mf->colorspace; icd->current_fmt = xlate; return 0; diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c index 7ccd76f7ca1a..fcb942de0c7f 100644 --- a/drivers/media/platform/soc_camera/pxa_camera.c +++ b/drivers/media/platform/soc_camera/pxa_camera.c @@ -1383,7 +1383,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, v4l_bound_align_image(&mf->width, 48, 2048, 1, &mf->height, 32, 2048, 0, fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &fmt); if (ret < 0) return ret; @@ -1425,7 +1425,10 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, .pixel_clock_max = pcdev->ciclk / 4, }; struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_mbus_framefmt mf; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_mbus_framefmt *mf = &format.format; int ret; xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); @@ -1439,15 +1442,15 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, /* The caller holds a mutex. */ icd->sense = &sense; - mf.width = pix->width; - mf.height = pix->height; - mf.field = pix->field; - mf.colorspace = pix->colorspace; - mf.code = xlate->code; + mf->width = pix->width; + mf->height = pix->height; + mf->field = pix->field; + mf->colorspace = pix->colorspace; + mf->code = xlate->code; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format); - if (mf.code != xlate->code) + if (mf->code != xlate->code) return -EINVAL; icd->sense = NULL; @@ -1455,10 +1458,10 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, if (ret < 0) { dev_warn(dev, "Failed to configure for format %x\n", pix->pixelformat); - } else if (pxa_camera_check_frame(mf.width, mf.height)) { + } else if (pxa_camera_check_frame(mf->width, mf->height)) { dev_warn(dev, "Camera driver produced an unsupported frame %dx%d\n", - mf.width, mf.height); + mf->width, mf->height); ret = -EINVAL; } else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { if (sense.pixel_clock > sense.pixel_clock_max) { @@ -1473,10 +1476,10 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, if (ret < 0) return ret; - pix->width = mf.width; - pix->height = mf.height; - pix->field = mf.field; - pix->colorspace = mf.colorspace; + pix->width = mf->width; + pix->height = mf->height; + pix->field = mf->field; + pix->colorspace = mf->colorspace; icd->current_fmt = xlate; return ret; diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c index 063285a8dcf5..35deed83582b 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -1376,8 +1376,8 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, mf->height = 960 >> shift; ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), - video, s_mbus_fmt, - mf); + pad, set_fmt, NULL, + &fmt); if (ret < 0) return ret; } diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 91c48ab6cd13..c5c6c4e91f7b 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1111,8 +1111,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int mf->width = 2560 >> shift; mf->height = 1920 >> shift; ret = v4l2_device_call_until_err(sd->v4l2_dev, - soc_camera_grp_id(icd), video, - s_mbus_fmt, mf); + soc_camera_grp_id(icd), pad, + set_fmt, NULL, &fmt); if (ret < 0) return ret; shift++; @@ -1286,8 +1286,8 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, if (interm_width < icd->user_width || interm_height < icd->user_height) { ret = v4l2_device_call_until_err(sd->v4l2_dev, - soc_camera_grp_id(icd), video, - s_mbus_fmt, mf); + soc_camera_grp_id(icd), pad, + set_fmt, NULL, &fmt); if (ret < 0) return ret; diff --git a/drivers/media/platform/soc_camera/soc_scale_crop.c b/drivers/media/platform/soc_camera/soc_scale_crop.c index 8e74fb7f2a07..bda29bc1b933 100644 --- a/drivers/media/platform/soc_camera/soc_scale_crop.c +++ b/drivers/media/platform/soc_camera/soc_scale_crop.c @@ -211,22 +211,23 @@ int soc_camera_client_s_crop(struct v4l2_subdev *sd, } EXPORT_SYMBOL(soc_camera_client_s_crop); -/* Iterative s_mbus_fmt, also updates cached client crop on success */ -static int client_s_fmt(struct soc_camera_device *icd, +/* Iterative set_fmt, also updates cached client crop on success */ +static int client_set_fmt(struct soc_camera_device *icd, struct v4l2_rect *rect, struct v4l2_rect *subrect, unsigned int max_width, unsigned int max_height, - struct v4l2_mbus_framefmt *mf, bool host_can_scale) + struct v4l2_subdev_format *format, bool host_can_scale) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; + struct v4l2_mbus_framefmt *mf = &format->format; unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h; struct v4l2_cropcap cap; bool host_1to1; int ret; ret = v4l2_device_call_until_err(sd->v4l2_dev, - soc_camera_grp_id(icd), video, - s_mbus_fmt, mf); + soc_camera_grp_id(icd), pad, + set_fmt, NULL, format); if (ret < 0) return ret; @@ -265,8 +266,8 @@ static int client_s_fmt(struct soc_camera_device *icd, mf->width = tmp_w; mf->height = tmp_h; ret = v4l2_device_call_until_err(sd->v4l2_dev, - soc_camera_grp_id(icd), video, - s_mbus_fmt, mf); + soc_camera_grp_id(icd), pad, + set_fmt, NULL, format); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); if (ret < 0) { @@ -309,7 +310,11 @@ int soc_camera_client_scale(struct soc_camera_device *icd, bool host_can_scale, unsigned int shift) { struct device *dev = icd->parent; - struct v4l2_mbus_framefmt mf_tmp = *mf; + struct v4l2_subdev_format fmt_tmp = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .format = *mf, + }; + struct v4l2_mbus_framefmt *mf_tmp = &fmt_tmp.format; unsigned int scale_h, scale_v; int ret; @@ -317,25 +322,25 @@ int soc_camera_client_scale(struct soc_camera_device *icd, * 5. Apply iterative camera S_FMT for camera user window (also updates * client crop cache and the imaginary sub-rectangle). */ - ret = client_s_fmt(icd, rect, subrect, *width, *height, - &mf_tmp, host_can_scale); + ret = client_set_fmt(icd, rect, subrect, *width, *height, + &fmt_tmp, host_can_scale); if (ret < 0) return ret; dev_geo(dev, "5: camera scaled to %ux%u\n", - mf_tmp.width, mf_tmp.height); + mf_tmp->width, mf_tmp->height); /* 6. Retrieve camera output window (g_fmt) */ /* unneeded - it is already in "mf_tmp" */ /* 7. Calculate new client scales. */ - scale_h = soc_camera_calc_scale(rect->width, shift, mf_tmp.width); - scale_v = soc_camera_calc_scale(rect->height, shift, mf_tmp.height); + scale_h = soc_camera_calc_scale(rect->width, shift, mf_tmp->width); + scale_v = soc_camera_calc_scale(rect->height, shift, mf_tmp->height); - mf->width = mf_tmp.width; - mf->height = mf_tmp.height; - mf->colorspace = mf_tmp.colorspace; + mf->width = mf_tmp->width; + mf->height = mf_tmp->height; + mf->colorspace = mf_tmp->colorspace; /* * 8. Calculate new host crop - apply camera scales to previously diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c index 6331d6b99d23..32e4ff46daf3 100644 --- a/drivers/media/platform/via-camera.c +++ b/drivers/media/platform/via-camera.c @@ -249,13 +249,15 @@ static int viacam_set_flip(struct via_camera *cam) */ static int viacam_configure_sensor(struct via_camera *cam) { - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int ret; - v4l2_fill_mbus_format(&mbus_fmt, &cam->sensor_format, cam->mbus_code); + v4l2_fill_mbus_format(&format.format, &cam->sensor_format, cam->mbus_code); ret = sensor_call(cam, core, init, 0); if (ret == 0) - ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt); + ret = sensor_call(cam, pad, set_fmt, NULL, &format); /* * OV7670 does weird things if flip is set *before* format... */ diff --git a/drivers/media/usb/cx231xx/cx231xx-417.c b/drivers/media/usb/cx231xx/cx231xx-417.c index 3096e291735c..855a708387c6 100644 --- a/drivers/media/usb/cx231xx/cx231xx-417.c +++ b/drivers/media/usb/cx231xx/cx231xx-417.c @@ -1878,13 +1878,15 @@ static int cx231xx_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) { struct cx231xx *dev = container_of(cxhdl, struct cx231xx, mpeg_ctrl_handler); int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; - struct v4l2_mbus_framefmt fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; /* fix videodecoder resolution */ - fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); - fmt.height = cxhdl->height; - fmt.code = MEDIA_BUS_FMT_FIXED; - v4l2_subdev_call(dev->sd_cx25840, video, s_mbus_fmt, &fmt); + format.format.width = cxhdl->width / (is_mpeg1 ? 2 : 1); + format.format.height = cxhdl->height; + format.format.code = MEDIA_BUS_FMT_FIXED; + v4l2_subdev_call(dev->sd_cx25840, pad, set_fmt, NULL, &format); return 0; } diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c index c261e160c158..af44f2d1c0a1 100644 --- a/drivers/media/usb/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -1013,7 +1013,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct cx231xx *dev = fh->dev; int rc; struct cx231xx_fmt *fmt; - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; rc = check_dev(dev); if (rc < 0) @@ -1041,9 +1043,9 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, dev->height = f->fmt.pix.height; dev->format = fmt; - v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); - call_all(dev, video, s_mbus_fmt, &mbus_fmt); - v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); + call_all(dev, pad, set_fmt, NULL, &format); + v4l2_fill_pix_format(&f->fmt.pix, &format.format); return rc; } @@ -1061,7 +1063,9 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) { struct cx231xx_fh *fh = priv; struct cx231xx *dev = fh->dev; - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; int rc; rc = check_dev(dev); @@ -1085,11 +1089,10 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) /* We need to reset basic properties in the decoder related to resolution (since a standard change effects things like the number of lines in VACT, etc) */ - memset(&mbus_fmt, 0, sizeof(mbus_fmt)); - mbus_fmt.code = MEDIA_BUS_FMT_FIXED; - mbus_fmt.width = dev->width; - mbus_fmt.height = dev->height; - call_all(dev, video, s_mbus_fmt, &mbus_fmt); + format.format.code = MEDIA_BUS_FMT_FIXED; + format.format.width = dev->width; + format.format.height = dev->height; + call_all(dev, pad, set_fmt, NULL, &format); /* do mode control overrides */ cx231xx_do_mode_ctrl_overrides(dev); diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index a4b22c2c3ba7..ed0b3a87983e 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -404,7 +404,9 @@ int em28xx_init_camera(struct em28xx *dev) .addr = client->addr, .platform_data = &camlink, }; - struct v4l2_mbus_framefmt fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; /* * FIXME: sensor supports resolutions up to 1600x1200, but @@ -425,10 +427,10 @@ int em28xx_init_camera(struct em28xx *dev) break; } - fmt.code = MEDIA_BUS_FMT_YUYV8_2X8; - fmt.width = 640; - fmt.height = 480; - v4l2_subdev_call(subdev, video, s_mbus_fmt, &fmt); + format.format.code = MEDIA_BUS_FMT_YUYV8_2X8; + format.format.width = 640; + format.format.height = 480; + v4l2_subdev_call(subdev, pad, set_fmt, NULL, &format); /* NOTE: for UXGA=1600x1200 switch to 12MHz */ dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ; diff --git a/drivers/media/usb/go7007/go7007-v4l2.c b/drivers/media/usb/go7007/go7007-v4l2.c index d6bf982efa42..c57207e268c3 100644 --- a/drivers/media/usb/go7007/go7007-v4l2.c +++ b/drivers/media/usb/go7007/go7007-v4l2.c @@ -250,15 +250,17 @@ static int set_capture_size(struct go7007 *go, struct v4l2_format *fmt, int try) go->encoder_v_offset = go->board_info->sensor_v_offset; if (go->board_info->sensor_flags & GO7007_SENSOR_SCALING) { - struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; - mbus_fmt.code = MEDIA_BUS_FMT_FIXED; - mbus_fmt.width = fmt ? fmt->fmt.pix.width : width; - mbus_fmt.height = height; + format.format.code = MEDIA_BUS_FMT_FIXED; + format.format.width = fmt ? fmt->fmt.pix.width : width; + format.format.height = height; go->encoder_h_halve = 0; go->encoder_v_halve = 0; go->encoder_subsample = 0; - call_all(&go->v4l2_dev, video, s_mbus_fmt, &mbus_fmt); + call_all(&go->v4l2_dev, pad, set_fmt, NULL, &format); } else { if (width <= sensor_width / 4) { go->encoder_h_halve = 1; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c index 775aa5ed92ee..0533ef20decf 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -2962,14 +2962,17 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) } if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) { - struct v4l2_mbus_framefmt fmt; - memset(&fmt, 0, sizeof(fmt)); - fmt.width = hdw->res_hor_val; - fmt.height = hdw->res_ver_val; - fmt.code = MEDIA_BUS_FMT_FIXED; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + format.format.width = hdw->res_hor_val; + format.format.height = hdw->res_ver_val; + format.format.code = MEDIA_BUS_FMT_FIXED; pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)", - fmt.width, fmt.height); - v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_mbus_fmt, &fmt); + format.format.width, format.format.height); + v4l2_device_call_all(&hdw->v4l2_dev, 0, pad, set_fmt, + NULL, &format); } if (hdw->srate_dirty || hdw->force_dirty) { diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 67a8e4e58d9a..8f5da73dacff 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -293,10 +293,6 @@ struct v4l2_mbus_frame_desc { g_dv_timings(): Get custom dv timings in the sub device. - try_mbus_fmt: try to set a pixel format on a video data source - - s_mbus_fmt: set a pixel format on a video data source - g_mbus_config: get supported mediabus configurations s_mbus_config: set a certain mediabus configuration. This operation is added @@ -334,10 +330,6 @@ struct v4l2_subdev_video_ops { struct v4l2_dv_timings *timings); int (*query_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); - int (*try_mbus_fmt)(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt); - int (*s_mbus_fmt)(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *fmt); int (*g_mbus_config)(struct v4l2_subdev *sd, struct v4l2_mbus_config *cfg); int (*s_mbus_config)(struct v4l2_subdev *sd, -- cgit v1.2.3 From fb7737e949e31d8a71acee6bbb670f32dbd2a2c0 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 4 Mar 2015 20:01:14 -0600 Subject: hwspinlock/core: add device tree support This patch adds a new OF-friendly API of_hwspin_lock_get_id() for hwspinlock clients to use/request locks from a hwspinlock device instantiated through a device-tree blob. This new API can be used by hwspinlock clients to get the id for a specific lock using the phandle + args specifier, so that it can be requested using the available hwspin_lock_request_specific() API. Signed-off-by: Suman Anna Reviewed-by: Bjorn Andersson [small comment clarification] Signed-off-by: Ohad Ben-Cohen --- Documentation/hwspinlock.txt | 10 +++++ drivers/hwspinlock/hwspinlock_core.c | 79 ++++++++++++++++++++++++++++++++++++ include/linux/hwspinlock.h | 7 ++++ 3 files changed, 96 insertions(+) (limited to 'include') diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt index 62f7d4ea6e26..61c1ee98e59f 100644 --- a/Documentation/hwspinlock.txt +++ b/Documentation/hwspinlock.txt @@ -48,6 +48,16 @@ independent, drivers. ids for predefined purposes. Should be called from a process context (might sleep). + int of_hwspin_lock_get_id(struct device_node *np, int index); + - retrieve the global lock id for an OF phandle-based specific lock. + This function provides a means for DT users of a hwspinlock module + to get the global lock id of a specific hwspinlock, so that it can + be requested using the normal hwspin_lock_request_specific() API. + The function returns a lock id number on success, -EPROBE_DEFER if + the hwspinlock device is not yet registered with the core, or other + error values. + Should be called from a process context (might sleep). + int hwspin_lock_free(struct hwspinlock *hwlock); - free a previously-assigned hwspinlock; returns 0 on success, or an appropriate error code on failure (e.g. -EINVAL if the hwspinlock diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 461a0d739d75..52f708bcf77f 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "hwspinlock_internal.h" @@ -257,6 +258,84 @@ void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) } EXPORT_SYMBOL_GPL(__hwspin_unlock); +/** + * of_hwspin_lock_simple_xlate - translate hwlock_spec to return a lock id + * @bank: the hwspinlock device bank + * @hwlock_spec: hwlock specifier as found in the device tree + * + * This is a simple translation function, suitable for hwspinlock platform + * drivers that only has a lock specifier length of 1. + * + * Returns a relative index of the lock within a specified bank on success, + * or -EINVAL on invalid specifier cell count. + */ +static inline int +of_hwspin_lock_simple_xlate(const struct of_phandle_args *hwlock_spec) +{ + if (WARN_ON(hwlock_spec->args_count != 1)) + return -EINVAL; + + return hwlock_spec->args[0]; +} + +/** + * of_hwspin_lock_get_id() - get lock id for an OF phandle-based specific lock + * @np: device node from which to request the specific hwlock + * @index: index of the hwlock in the list of values + * + * This function provides a means for DT users of the hwspinlock module to + * get the global lock id of a specific hwspinlock using the phandle of the + * hwspinlock device, so that it can be requested using the normal + * hwspin_lock_request_specific() API. + * + * Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock + * device is not yet registered, -EINVAL on invalid args specifier value or an + * appropriate error as returned from the OF parsing of the DT client node. + */ +int of_hwspin_lock_get_id(struct device_node *np, int index) +{ + struct of_phandle_args args; + struct hwspinlock *hwlock; + struct radix_tree_iter iter; + void **slot; + int id; + int ret; + + ret = of_parse_phandle_with_args(np, "hwlocks", "#hwlock-cells", index, + &args); + if (ret) + return ret; + + /* Find the hwspinlock device: we need its base_id */ + ret = -EPROBE_DEFER; + rcu_read_lock(); + radix_tree_for_each_slot(slot, &hwspinlock_tree, &iter, 0) { + hwlock = radix_tree_deref_slot(slot); + if (unlikely(!hwlock)) + continue; + + if (hwlock->bank->dev->of_node == args.np) { + ret = 0; + break; + } + } + rcu_read_unlock(); + if (ret < 0) + goto out; + + id = of_hwspin_lock_simple_xlate(&args); + if (id < 0 || id >= hwlock->bank->num_locks) { + ret = -EINVAL; + goto out; + } + id += hwlock->bank->base_id; + +out: + of_node_put(args.np); + return ret ? ret : id; +} +EXPORT_SYMBOL_GPL(of_hwspin_lock_get_id); + static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id) { struct hwspinlock *tmp; diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h index 3343298e40e8..859d673d98c8 100644 --- a/include/linux/hwspinlock.h +++ b/include/linux/hwspinlock.h @@ -26,6 +26,7 @@ #define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */ struct device; +struct device_node; struct hwspinlock; struct hwspinlock_device; struct hwspinlock_ops; @@ -66,6 +67,7 @@ int hwspin_lock_unregister(struct hwspinlock_device *bank); struct hwspinlock *hwspin_lock_request(void); struct hwspinlock *hwspin_lock_request_specific(unsigned int id); int hwspin_lock_free(struct hwspinlock *hwlock); +int of_hwspin_lock_get_id(struct device_node *np, int index); int hwspin_lock_get_id(struct hwspinlock *hwlock); int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int, unsigned long *); @@ -120,6 +122,11 @@ void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags) { } +static inline int of_hwspin_lock_get_id(struct device_node *np, int index) +{ + return 0; +} + static inline int hwspin_lock_get_id(struct hwspinlock *hwlock) { return 0; -- cgit v1.2.3 From 99264a61dfcda41d86d0960cf2d4c0fc2758a773 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 15 Apr 2015 19:34:43 +0200 Subject: drm/vblank: Fixup and document timestamp update/read barriers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was a bit too much cargo-culted, so lets make it solid: - vblank->count doesn't need to be an atomic, writes are always done under the protection of dev->vblank_time_lock. Switch to an unsigned long instead and update comments. Note that atomic_read is just a normal read of a volatile variable, so no need to audit all the read-side access specifically. - The barriers for the vblank counter seqlock weren't complete: The read-side was missing the first barrier between the counter read and the timestamp read, it only had a barrier between the ts and the counter read. We need both. - Barriers weren't properly documented. Since barriers only work if you have them on boths sides of the transaction it's prudent to reference where the other side is. To avoid duplicating the write-side comment 3 times extract a little store_vblank() helper. In that helper also assert that we do indeed hold dev->vblank_time_lock, since in some cases the lock is acquired a few functions up in the callchain. Spotted while reviewing a patch from Chris Wilson to add a fastpath to the vblank_wait ioctl. v2: Add comment to better explain how store_vblank works, suggested by Chris. v3: Peter noticed that as-is the 2nd smp_wmb is redundant with the implicit barrier in the spin_unlock. But that can only be proven by auditing all callers and my point in extracting this little helper was to localize all the locking into just one place. Hence I think that additional optimization is too risky. Cc: Chris Wilson Cc: Mario Kleiner Cc: Ville Syrjälä Cc: Michel Dänzer Cc: Peter Hurley Reviewed-by: Chris Wilson Reviewed-and-tested-by: Mario Kleiner Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_irq.c | 95 +++++++++++++++++++++++++---------------------- include/drm/drmP.h | 8 +++- 2 files changed, 57 insertions(+), 46 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index c8a34476570a..8694b77d0002 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -74,6 +74,36 @@ module_param_named(vblankoffdelay, drm_vblank_offdelay, int, 0600); module_param_named(timestamp_precision_usec, drm_timestamp_precision, int, 0600); module_param_named(timestamp_monotonic, drm_timestamp_monotonic, int, 0600); +static void store_vblank(struct drm_device *dev, int crtc, + unsigned vblank_count_inc, + struct timeval *t_vblank) +{ + struct drm_vblank_crtc *vblank = &dev->vblank[crtc]; + u32 tslot; + + assert_spin_locked(&dev->vblank_time_lock); + + if (t_vblank) { + /* All writers hold the spinlock, but readers are serialized by + * the latching of vblank->count below. + */ + tslot = vblank->count + vblank_count_inc; + vblanktimestamp(dev, crtc, tslot) = *t_vblank; + } + + /* + * vblank timestamp updates are protected on the write side with + * vblank_time_lock, but on the read side done locklessly using a + * sequence-lock on the vblank counter. Ensure correct ordering using + * memory barrriers. We need the barrier both before and also after the + * counter update to synchronize with the next timestamp write. + * The read-side barriers for this are in drm_vblank_count_and_time. + */ + smp_wmb(); + vblank->count += vblank_count_inc; + smp_wmb(); +} + /** * drm_update_vblank_count - update the master vblank counter * @dev: DRM device @@ -93,7 +123,7 @@ module_param_named(timestamp_monotonic, drm_timestamp_monotonic, int, 0600); static void drm_update_vblank_count(struct drm_device *dev, int crtc) { struct drm_vblank_crtc *vblank = &dev->vblank[crtc]; - u32 cur_vblank, diff, tslot; + u32 cur_vblank, diff; bool rc; struct timeval t_vblank; @@ -129,18 +159,12 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc) if (diff == 0) return; - /* Reinitialize corresponding vblank timestamp if high-precision query - * available. Skip this step if query unsupported or failed. Will - * reinitialize delayed at next vblank interrupt in that case. + /* + * Only reinitialize corresponding vblank timestamp if high-precision query + * available and didn't fail. Will reinitialize delayed at next vblank + * interrupt in that case. */ - if (rc) { - tslot = atomic_read(&vblank->count) + diff; - vblanktimestamp(dev, crtc, tslot) = t_vblank; - } - - smp_mb__before_atomic(); - atomic_add(diff, &vblank->count); - smp_mb__after_atomic(); + store_vblank(dev, crtc, diff, rc ? &t_vblank : NULL); } /* @@ -218,7 +242,7 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) /* Compute time difference to stored timestamp of last vblank * as updated by last invocation of drm_handle_vblank() in vblank irq. */ - vblcount = atomic_read(&vblank->count); + vblcount = vblank->count; diff_ns = timeval_to_ns(&tvblank) - timeval_to_ns(&vblanktimestamp(dev, crtc, vblcount)); @@ -234,17 +258,8 @@ static void vblank_disable_and_save(struct drm_device *dev, int crtc) * available. In that case we can't account for this and just * hope for the best. */ - if (vblrc && (abs64(diff_ns) > 1000000)) { - /* Store new timestamp in ringbuffer. */ - vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; - - /* Increment cooked vblank count. This also atomically commits - * the timestamp computed above. - */ - smp_mb__before_atomic(); - atomic_inc(&vblank->count); - smp_mb__after_atomic(); - } + if (vblrc && (abs64(diff_ns) > 1000000)) + store_vblank(dev, crtc, 1, &tvblank); spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags); } @@ -852,7 +867,7 @@ u32 drm_vblank_count(struct drm_device *dev, int crtc) if (WARN_ON(crtc >= dev->num_crtcs)) return 0; - return atomic_read(&vblank->count); + return vblank->count; } EXPORT_SYMBOL(drm_vblank_count); @@ -897,16 +912,17 @@ u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc, if (WARN_ON(crtc >= dev->num_crtcs)) return 0; - /* Read timestamp from slot of _vblank_time ringbuffer - * that corresponds to current vblank count. Retry if - * count has incremented during readout. This works like - * a seqlock. + /* + * Vblank timestamps are read lockless. To ensure consistency the vblank + * counter is rechecked and ordering is ensured using memory barriers. + * This works like a seqlock. The write-side barriers are in store_vblank. */ do { - cur_vblank = atomic_read(&vblank->count); + cur_vblank = vblank->count; + smp_rmb(); *vblanktime = vblanktimestamp(dev, crtc, cur_vblank); smp_rmb(); - } while (cur_vblank != atomic_read(&vblank->count)); + } while (cur_vblank != vblank->count); return cur_vblank; } @@ -1715,7 +1731,7 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) */ /* Get current timestamp and count. */ - vblcount = atomic_read(&vblank->count); + vblcount = vblank->count; drm_get_last_vbltimestamp(dev, crtc, &tvblank, DRM_CALLED_FROM_VBLIRQ); /* Compute time difference to timestamp of last vblank */ @@ -1731,20 +1747,11 @@ bool drm_handle_vblank(struct drm_device *dev, int crtc) * e.g., due to spurious vblank interrupts. We need to * ignore those for accounting. */ - if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) { - /* Store new timestamp in ringbuffer. */ - vblanktimestamp(dev, crtc, vblcount + 1) = tvblank; - - /* Increment cooked vblank count. This also atomically commits - * the timestamp computed above. - */ - smp_mb__before_atomic(); - atomic_inc(&vblank->count); - smp_mb__after_atomic(); - } else { + if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) + store_vblank(dev, crtc, 1, &tvblank); + else DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n", crtc, (int) diff_ns); - } spin_unlock(&dev->vblank_time_lock); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 62c40777c009..4c31a2cc5a33 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -686,9 +686,13 @@ struct drm_pending_vblank_event { struct drm_vblank_crtc { struct drm_device *dev; /* pointer to the drm_device */ wait_queue_head_t queue; /**< VBLANK wait queue */ - struct timeval time[DRM_VBLANKTIME_RBSIZE]; /**< timestamp of current count */ struct timer_list disable_timer; /* delayed disable timer */ - atomic_t count; /**< number of VBLANK interrupts */ + + /* vblank counter, protected by dev->vblank_time_lock for writes */ + unsigned long count; + /* vblank timestamps, protected by dev->vblank_time_lock for writes */ + struct timeval time[DRM_VBLANKTIME_RBSIZE]; + atomic_t refcount; /* number of users of vblank interruptsper crtc */ u32 last; /* protected by dev->vbl_lock, used */ /* for wraparound handling */ -- cgit v1.2.3 From e660df07ab90f4f61ed743522067a8dbaa6fa567 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 23 Jan 2015 09:45:35 +0100 Subject: memory: tegra: Add SWGROUP names Subsequent patches will add debugfs files that print the status of the SWGROUPs. Add a new names field and complement the SoC tables with the names of the individual SWGROUPs. Signed-off-by: Thierry Reding --- drivers/memory/tegra/tegra114.c | 32 ++++++++++++++-------------- drivers/memory/tegra/tegra124.c | 46 ++++++++++++++++++++--------------------- drivers/memory/tegra/tegra30.c | 32 ++++++++++++++-------------- include/soc/tegra/mc.h | 1 + 4 files changed, 56 insertions(+), 55 deletions(-) (limited to 'include') diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c index 511e9a25c151..9f579589e800 100644 --- a/drivers/memory/tegra/tegra114.c +++ b/drivers/memory/tegra/tegra114.c @@ -896,22 +896,22 @@ static const struct tegra_mc_client tegra114_mc_clients[] = { }; static const struct tegra_smmu_swgroup tegra114_swgroups[] = { - { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, - { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, - { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 }, - { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c }, - { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, - { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 }, - { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, - { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, - { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 }, - { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, - { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, - { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, - { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, - { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 }, - { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c }, - { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, + { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, + { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, + { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 }, + { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c }, + { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, + { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 }, + { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, + { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, + { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 }, + { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, + { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, + { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, + { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, + { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 }, + { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c }, + { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, }; static void tegra114_flush_dcache(struct page *page, unsigned long offset, diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index 278d40b854c1..e63e05769d0a 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -934,29 +934,29 @@ static const struct tegra_mc_client tegra124_mc_clients[] = { }; static const struct tegra_smmu_swgroup tegra124_swgroups[] = { - { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, - { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, - { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 }, - { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, - { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, - { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, - { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 }, - { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, - { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 }, - { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, - { .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 }, - { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 }, - { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c }, - { .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 }, - { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, - { .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 }, - { .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac }, - { .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 }, - { .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 }, - { .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c }, - { .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 }, - { .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 }, - { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, + { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, + { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, + { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 }, + { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, + { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, + { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, + { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 }, + { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, + { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 }, + { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, + { .name = "isp2", .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 }, + { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 }, + { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c }, + { .name = "isp2b", .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 }, + { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, + { .name = "a9avp", .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 }, + { .name = "gpu", .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac }, + { .name = "sdmmc1a", .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 }, + { .name = "sdmmc2a", .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 }, + { .name = "sdmmc3a", .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c }, + { .name = "sdmmc4a", .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 }, + { .name = "vic", .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 }, + { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, }; #ifdef CONFIG_ARCH_TEGRA_124_SOC diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c index 71fe9376fe53..1abcd8f6f3ba 100644 --- a/drivers/memory/tegra/tegra30.c +++ b/drivers/memory/tegra/tegra30.c @@ -918,22 +918,22 @@ static const struct tegra_mc_client tegra30_mc_clients[] = { }; static const struct tegra_smmu_swgroup tegra30_swgroups[] = { - { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, - { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, - { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 }, - { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c }, - { .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 }, - { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, - { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 }, - { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, - { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 }, - { .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c }, - { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, - { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, - { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, - { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 }, - { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, - { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, + { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 }, + { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 }, + { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 }, + { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c }, + { .name = "mpe", .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 }, + { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, + { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 }, + { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c }, + { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 }, + { .name = "nv2", .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c }, + { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 }, + { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 }, + { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 }, + { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 }, + { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c }, + { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, }; static void tegra30_flush_dcache(struct page *page, unsigned long offset, diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index 63deb8d9f82a..b2548811e1d5 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -40,6 +40,7 @@ struct tegra_mc_client { }; struct tegra_smmu_swgroup { + const char *name; unsigned int swgroup; unsigned int reg; }; -- cgit v1.2.3 From d1313e7896e932a92e21912850ef034e58571b66 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 23 Jan 2015 09:49:25 +0100 Subject: iommu/tegra-smmu: Add debugfs support Provide clients and swgroups files in debugfs. These files show for which clients IOMMU translation is enabled and which ASID is associated with each SWGROUP. Cc: Hiroshi Doyu Acked-by: Joerg Roedel Signed-off-by: Thierry Reding --- drivers/iommu/tegra-smmu.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ include/soc/tegra/mc.h | 5 +++ 2 files changed, 114 insertions(+) (limited to 'include') diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index c845d99ecf6b..c1f2e521dc52 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -31,6 +32,8 @@ struct tegra_smmu { struct mutex lock; struct list_head list; + + struct dentry *debugfs; }; struct tegra_smmu_as { @@ -673,6 +676,103 @@ static void tegra_smmu_ahb_enable(void) } } +static int tegra_smmu_swgroups_show(struct seq_file *s, void *data) +{ + struct tegra_smmu *smmu = s->private; + unsigned int i; + u32 value; + + seq_printf(s, "swgroup enabled ASID\n"); + seq_printf(s, "------------------------\n"); + + for (i = 0; i < smmu->soc->num_swgroups; i++) { + const struct tegra_smmu_swgroup *group = &smmu->soc->swgroups[i]; + const char *status; + unsigned int asid; + + value = smmu_readl(smmu, group->reg); + + if (value & SMMU_ASID_ENABLE) + status = "yes"; + else + status = "no"; + + asid = value & SMMU_ASID_MASK; + + seq_printf(s, "%-9s %-7s %#04x\n", group->name, status, + asid); + } + + return 0; +} + +static int tegra_smmu_swgroups_open(struct inode *inode, struct file *file) +{ + return single_open(file, tegra_smmu_swgroups_show, inode->i_private); +} + +static const struct file_operations tegra_smmu_swgroups_fops = { + .open = tegra_smmu_swgroups_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int tegra_smmu_clients_show(struct seq_file *s, void *data) +{ + struct tegra_smmu *smmu = s->private; + unsigned int i; + u32 value; + + seq_printf(s, "client enabled\n"); + seq_printf(s, "--------------------\n"); + + for (i = 0; i < smmu->soc->num_clients; i++) { + const struct tegra_mc_client *client = &smmu->soc->clients[i]; + const char *status; + + value = smmu_readl(smmu, client->smmu.reg); + + if (value & BIT(client->smmu.bit)) + status = "yes"; + else + status = "no"; + + seq_printf(s, "%-12s %s\n", client->name, status); + } + + return 0; +} + +static int tegra_smmu_clients_open(struct inode *inode, struct file *file) +{ + return single_open(file, tegra_smmu_clients_show, inode->i_private); +} + +static const struct file_operations tegra_smmu_clients_fops = { + .open = tegra_smmu_clients_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void tegra_smmu_debugfs_init(struct tegra_smmu *smmu) +{ + smmu->debugfs = debugfs_create_dir("smmu", NULL); + if (!smmu->debugfs) + return; + + debugfs_create_file("swgroups", S_IRUGO, smmu->debugfs, smmu, + &tegra_smmu_swgroups_fops); + debugfs_create_file("clients", S_IRUGO, smmu->debugfs, smmu, + &tegra_smmu_clients_fops); +} + +static void tegra_smmu_debugfs_exit(struct tegra_smmu *smmu) +{ + debugfs_remove_recursive(smmu->debugfs); +} + struct tegra_smmu *tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc, struct tegra_mc *mc) @@ -743,5 +843,14 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev, if (err < 0) return ERR_PTR(err); + if (IS_ENABLED(CONFIG_DEBUG_FS)) + tegra_smmu_debugfs_init(smmu); + return smmu; } + +void tegra_smmu_remove(struct tegra_smmu *smmu) +{ + if (IS_ENABLED(CONFIG_DEBUG_FS)) + tegra_smmu_debugfs_exit(smmu); +} diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index b2548811e1d5..e5ba518aaece 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -72,6 +72,7 @@ struct tegra_smmu; struct tegra_smmu *tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc, struct tegra_mc *mc); +void tegra_smmu_remove(struct tegra_smmu *smmu); #else static inline struct tegra_smmu * tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc, @@ -79,6 +80,10 @@ tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc, { return NULL; } + +static inline void tegra_smmu_remove(struct tegra_smmu *smmu) +{ +} #endif struct tegra_mc_soc { -- cgit v1.2.3 From 6ea2609ab386f6bfeebc39e1418b7497a9deb55c Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Thu, 12 Mar 2015 15:47:55 +0100 Subject: soc/tegra: fuse: Add RAM code reader helper Needed for the EMC and MC drivers to know what timings from the DT to use. Signed-off-by: Mikko Perttunen Signed-off-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/soc/tegra/fuse/tegra-apbmisc.c | 21 +++++++++++++++++++++ include/soc/tegra/fuse.h | 1 + 2 files changed, 22 insertions(+) (limited to 'include') diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c index 3bf5aba4caaa..73fad05d8f2c 100644 --- a/drivers/soc/tegra/fuse/tegra-apbmisc.c +++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c @@ -28,8 +28,15 @@ #define APBMISC_SIZE 0x64 #define FUSE_SKU_INFO 0x10 +#define PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT 4 +#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG \ + (0xf << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT) +#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT \ + (0x3 << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT) + static void __iomem *apbmisc_base; static void __iomem *strapping_base; +static bool long_ram_code; u32 tegra_read_chipid(void) { @@ -54,6 +61,18 @@ u32 tegra_read_straps(void) return 0; } +u32 tegra_read_ram_code(void) +{ + u32 straps = tegra_read_straps(); + + if (long_ram_code) + straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG; + else + straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT; + + return straps >> PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT; +} + static const struct of_device_id apbmisc_match[] __initconst = { { .compatible = "nvidia,tegra20-apbmisc", }, {}, @@ -112,4 +131,6 @@ void __init tegra_init_apbmisc(void) strapping_base = of_iomap(np, 1); if (!strapping_base) pr_err("ioremap tegra strapping_base failed\n"); + + long_ram_code = of_property_read_bool(np, "nvidia,long-ram-code"); } diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h index b5f7b5f8d008..b019e3465f11 100644 --- a/include/soc/tegra/fuse.h +++ b/include/soc/tegra/fuse.h @@ -56,6 +56,7 @@ struct tegra_sku_info { }; u32 tegra_read_straps(void); +u32 tegra_read_ram_code(void); u32 tegra_read_chipid(void); int tegra_fuse_readl(unsigned long offset, u32 *value); -- cgit v1.2.3 From 7892158a96629c46c46dfae52eaf951f51222cf5 Mon Sep 17 00:00:00 2001 From: David Riley Date: Wed, 18 Mar 2015 10:52:25 +0100 Subject: soc/tegra: pmc: move to using a restart handler The pmc driver was previously exporting tegra_pmc_restart, which was assigned to machine_desc.init_machine, taking precedence over the restart handlers registered through register_restart_handler(). Signed-off-by: David Riley [tomeu.vizoso@collabora.com: Rebased] Signed-off-by: Tomeu Vizoso Acked-by: Stephen Warren Reviewed-by: Alexandre Courbot [treding@nvidia.com: minor cleanups] Signed-off-by: Thierry Reding --- arch/arm/mach-tegra/tegra.c | 1 - drivers/soc/tegra/pmc.c | 23 +++++++++++++++++------ include/soc/tegra/pmc.h | 2 -- 3 files changed, 17 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 861d88486dbe..2378fa560a21 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -163,6 +163,5 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, - .restart = tegra_pmc_restart, .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index c956395cf46f..cc119d15dd16 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -377,13 +377,10 @@ int tegra_pmc_cpu_remove_clamping(int cpuid) } #endif /* CONFIG_SMP */ -/** - * tegra_pmc_restart() - reboot the system - * @mode: which mode to reboot in - * @cmd: reboot command - */ -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) +static int tegra_pmc_restart_notify(struct notifier_block *this, + unsigned long action, void *data) { + const char *cmd = data; u32 value; value = tegra_pmc_readl(PMC_SCRATCH0); @@ -405,8 +402,15 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) value = tegra_pmc_readl(0); value |= 0x10; tegra_pmc_writel(value, 0); + + return NOTIFY_DONE; } +static struct notifier_block tegra_pmc_restart_handler = { + .notifier_call = tegra_pmc_restart_notify, + .priority = 128, +}; + static int powergate_show(struct seq_file *s, void *data) { unsigned int i; @@ -837,6 +841,13 @@ static int tegra_pmc_probe(struct platform_device *pdev) return err; } + err = register_restart_handler(&tegra_pmc_restart_handler); + if (err) { + dev_err(&pdev->dev, "unable to register restart handler, %d\n", + err); + return err; + } + return 0; } diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h index 65a93273e72f..f5c0de43a5fa 100644 --- a/include/soc/tegra/pmc.h +++ b/include/soc/tegra/pmc.h @@ -26,8 +26,6 @@ struct clk; struct reset_control; -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd); - #ifdef CONFIG_PM_SLEEP enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode); -- cgit v1.2.3 From 20f56758b04364c3c139edbffde8cfaf0307edee Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Tue, 28 Apr 2015 00:18:41 -0700 Subject: leds: unify the location of led-trigger API Part of led-trigger API was in the private drivers/leds/leds.h header. Move it to the include/linux/leds.h header to unify the API location and announce it as public. It has been already exported from led-triggers.c with EXPORT_SYMBOL_GPL macro. The no-op definitions are changed from macros to inline to match the style of the surrounding code. Signed-off-by: Jacek Anaszewski Cc: Richard Purdie Acked-by: Sakari Ailus Signed-off-by: Bryan Wu --- drivers/leds/leds.h | 24 ------------------------ include/linux/leds.h | 25 +++++++++++++++++++++++++ 2 files changed, 25 insertions(+), 24 deletions(-) (limited to 'include') diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h index 79efe57c7405..bc89d7ace2c4 100644 --- a/drivers/leds/leds.h +++ b/drivers/leds/leds.h @@ -13,7 +13,6 @@ #ifndef __LEDS_H_INCLUDED #define __LEDS_H_INCLUDED -#include #include #include @@ -50,27 +49,4 @@ void led_stop_software_blink(struct led_classdev *led_cdev); extern struct rw_semaphore leds_list_lock; extern struct list_head leds_list; -#ifdef CONFIG_LEDS_TRIGGERS -void led_trigger_set_default(struct led_classdev *led_cdev); -void led_trigger_set(struct led_classdev *led_cdev, - struct led_trigger *trigger); -void led_trigger_remove(struct led_classdev *led_cdev); - -static inline void *led_get_trigger_data(struct led_classdev *led_cdev) -{ - return led_cdev->trigger_data; -} - -#else -#define led_trigger_set_default(x) do {} while (0) -#define led_trigger_set(x, y) do {} while (0) -#define led_trigger_remove(x) do {} while (0) -#define led_get_trigger_data(x) (NULL) -#endif - -ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count); -ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr, - char *buf); - #endif /* __LEDS_H_INCLUDED */ diff --git a/include/linux/leds.h b/include/linux/leds.h index 9a2b000094cf..b122eeafb5dc 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -12,6 +12,7 @@ #ifndef __LINUX_LEDS_H_INCLUDED #define __LINUX_LEDS_H_INCLUDED +#include #include #include #include @@ -222,6 +223,11 @@ struct led_trigger { struct list_head next_trig; }; +ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr, + char *buf); + /* Registration functions for complex triggers */ extern int led_trigger_register(struct led_trigger *trigger); extern void led_trigger_unregister(struct led_trigger *trigger); @@ -238,6 +244,16 @@ extern void led_trigger_blink_oneshot(struct led_trigger *trigger, unsigned long *delay_on, unsigned long *delay_off, int invert); +extern void led_trigger_set_default(struct led_classdev *led_cdev); +extern void led_trigger_set(struct led_classdev *led_cdev, + struct led_trigger *trigger); +extern void led_trigger_remove(struct led_classdev *led_cdev); + +static inline void *led_get_trigger_data(struct led_classdev *led_cdev) +{ + return led_cdev->trigger_data; +} + /** * led_trigger_rename_static - rename a trigger * @name: the new trigger name @@ -267,6 +283,15 @@ static inline void led_trigger_register_simple(const char *name, static inline void led_trigger_unregister_simple(struct led_trigger *trigger) {} static inline void led_trigger_event(struct led_trigger *trigger, enum led_brightness event) {} +static inline void led_trigger_set_default(struct led_classdev *led_cdev) {} +static inline void led_trigger_set(struct led_classdev *led_cdev, + struct led_trigger *trigger) {} +static inline void led_trigger_remove(struct led_classdev *led_cdev) {} +static inline void *led_get_trigger_data(struct led_classdev *led_cdev) +{ + return NULL; +} + #endif /* CONFIG_LEDS_TRIGGERS */ /* Trigger specific functions */ -- cgit v1.2.3 From 6cd9e9f629f11b9412d4e9aa294c029dbb36b3cf Mon Sep 17 00:00:00 2001 From: Kapileshwar Singh Date: Wed, 18 Feb 2015 16:04:21 +0000 Subject: thermal: of: fix cooling device weights in device tree Currently you can specify the weight of the cooling device in the device tree but that information is not populated to the thermal_bind_params where the fair share governor expects it to be. The of thermal zone device doesn't have a thermal_bind_params structure and arguably it's better to pass the weight inside the thermal_instance as it is specific to the bind of a cooling device to a thermal zone parameter. Core thermal code is fixed to populate the weight in the instance from the thermal_bind_params, so platform code that was passing the weight inside the thermal_bind_params continue to work seamlessly. While we are at it, create a default value for the weight parameter for those thermal zones that currently don't define it and remove the hardcoded default in of-thermal. Cc: Zhang Rui Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: Peter Feuerer Cc: Darren Hart Cc: Eduardo Valentin Cc: Kukjin Kim Cc: Durgadoss R Signed-off-by: Kapileshwar Singh Signed-off-by: Eduardo Valentin --- Documentation/thermal/sysfs-api.txt | 4 +++- drivers/acpi/thermal.c | 9 ++++++--- drivers/platform/x86/acerhdf.c | 3 ++- drivers/thermal/db8500_thermal.c | 2 +- drivers/thermal/fair_share.c | 2 +- drivers/thermal/imx_thermal.c | 3 ++- drivers/thermal/of-thermal.c | 5 +++-- drivers/thermal/thermal_core.c | 22 ++++++++++++++++------ drivers/thermal/thermal_core.h | 1 + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 3 ++- include/linux/thermal.h | 6 +++++- 11 files changed, 42 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 87519cb379ee..7ec632ed9769 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -95,7 +95,7 @@ temperature) and throttle appropriate devices. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower); + unsigned long upper, unsigned long lower, unsigned int weight); This interface function bind a thermal cooling device to the certain trip point of a thermal zone device. @@ -110,6 +110,8 @@ temperature) and throttle appropriate devices. lower:the Minimum cooling state can be used for this trip point. THERMAL_NO_LIMIT means no lower limit, and the cooling device can be in cooling state 0. + weight: the influence of this cooling device in this thermal + zone. See 1.4.1 below for more information. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index d24fa1964eb8..6d4e44ea74ac 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -800,7 +800,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, result = thermal_zone_bind_cooling_device (thermal, trip, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device @@ -824,7 +825,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, if (bind) result = thermal_zone_bind_cooling_device (thermal, trip, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device (thermal, trip, cdev); @@ -841,7 +843,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, result = thermal_zone_bind_cooling_device (thermal, THERMAL_TRIPS_NONE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); else result = thermal_zone_unbind_cooling_device (thermal, THERMAL_TRIPS_NONE, diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 594c918b553d..1ef02daddb60 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -372,7 +372,8 @@ static int acerhdf_bind(struct thermal_zone_device *thermal, return 0; if (thermal_zone_bind_cooling_device(thermal, 0, cdev, - THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) { + THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT)) { pr_err("error binding cooling dev\n"); return -EINVAL; } diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index 20adfbe27df1..2fb273c4baa9 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -76,7 +76,7 @@ static int db8500_cdev_bind(struct thermal_zone_device *thermal, upper = lower = i > max_state ? max_state : i; ret = thermal_zone_bind_cooling_device(thermal, i, cdev, - upper, lower); + upper, lower, THERMAL_WEIGHT_DEFAULT); dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type, i, ret, ret ? "fail" : "succeed"); diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 6e0a3fbfae86..c3b25187b467 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -109,7 +109,7 @@ static int fair_share_throttle(struct thermal_zone_device *tz, int trip) continue; instance->target = get_target_state(tz, cdev, - tzp->tbp[i].weight, cur_trip_level); + instance->weight, cur_trip_level); instance->cdev->updated = false; thermal_cdev_update(cdev); diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 2ccbc0788353..fde4c2876d14 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -306,7 +306,8 @@ static int imx_bind(struct thermal_zone_device *tz, ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); if (ret) { dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 668fb1bdea9e..c606b85ea9f4 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -227,7 +227,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, tbp->max, - tbp->min); + tbp->min, + tbp->usage); if (ret) return ret; } @@ -581,7 +582,7 @@ static int thermal_of_populate_bind_params(struct device_node *np, u32 prop; /* Default weight. Usage is optional */ - __tbp->usage = 0; + __tbp->usage = THERMAL_WEIGHT_DEFAULT; ret = of_property_read_u32(np, "contribution", &prop); if (ret == 0) __tbp->usage = prop; diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 4108db7e10c1..a6cb9b78b629 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -218,7 +218,8 @@ static void print_bind_err_msg(struct thermal_zone_device *tz, static void __bind(struct thermal_zone_device *tz, int mask, struct thermal_cooling_device *cdev, - unsigned long *limits) + unsigned long *limits, + unsigned int weight) { int i, ret; @@ -233,7 +234,8 @@ static void __bind(struct thermal_zone_device *tz, int mask, upper = limits[i * 2 + 1]; } ret = thermal_zone_bind_cooling_device(tz, i, cdev, - upper, lower); + upper, lower, + weight); if (ret) print_bind_err_msg(tz, cdev, ret); } @@ -280,7 +282,8 @@ static void bind_cdev(struct thermal_cooling_device *cdev) continue; tzp->tbp[i].cdev = cdev; __bind(pos, tzp->tbp[i].trip_mask, cdev, - tzp->tbp[i].binding_limits); + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); } } @@ -319,7 +322,8 @@ static void bind_tz(struct thermal_zone_device *tz) continue; tzp->tbp[i].cdev = pos; __bind(tz, tzp->tbp[i].trip_mask, pos, - tzp->tbp[i].binding_limits); + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); } } exit: @@ -713,7 +717,8 @@ passive_store(struct device *dev, struct device_attribute *attr, thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); } mutex_unlock(&thermal_list_lock); if (!tz->passive_delay) @@ -931,6 +936,9 @@ static const struct attribute_group *cooling_device_attr_groups[] = { * @lower: the Minimum cooling state can be used for this trip point. * THERMAL_NO_LIMIT means no lower limit, * and the cooling device can be in cooling state 0. + * @weight: The weight of the cooling device to be bound to the + * thermal zone. Use THERMAL_WEIGHT_DEFAULT for the + * default value * * This interface function bind a thermal cooling device to the certain trip * point of a thermal zone device. @@ -941,7 +949,8 @@ static const struct attribute_group *cooling_device_attr_groups[] = { int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev, - unsigned long upper, unsigned long lower) + unsigned long upper, unsigned long lower, + unsigned int weight) { struct thermal_instance *dev; struct thermal_instance *pos; @@ -986,6 +995,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->upper = upper; dev->lower = lower; dev->target = THERMAL_NO_TARGET; + dev->weight = weight; result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 0531c752fbbb..7a465e9d456c 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -48,6 +48,7 @@ struct thermal_instance { struct device_attribute attr; struct list_head tz_node; /* node in tz->thermal_instances */ struct list_head cdev_node; /* node in cdev->thermal_instances */ + unsigned int weight; /* The weight of the cooling device */ }; int thermal_register_governor(struct thermal_governor *); diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index a38c1756442a..cb45e729adb5 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -146,7 +146,8 @@ static int ti_thermal_bind(struct thermal_zone_device *thermal, return thermal_zone_bind_cooling_device(thermal, 0, cdev, /* bind with min and max states defined by cpu_cooling */ THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT); + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); } /* Unbind callback functions for thermal zone */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 5eac316490ea..00dacd4dfdce 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -40,6 +40,9 @@ /* No upper/lower limit requirement */ #define THERMAL_NO_LIMIT ((u32)~0) +/* Default weight of a bound cooling device */ +#define THERMAL_WEIGHT_DEFAULT 0 + /* Unit conversion macros */ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ ((long)t-2732+5)/10 : ((long)t-2732-5)/10) @@ -323,7 +326,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *, - unsigned long, unsigned long); + unsigned long, unsigned long, + unsigned int); int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); -- cgit v1.2.3 From bcdcbbc71125c37195f97314f453ca9a3a4eb758 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Wed, 18 Feb 2015 16:04:25 +0000 Subject: thermal: fair_share: generalize the weight concept The fair share governor has the concept of weights, which is the influence of each cooling device in a thermal zone. The current implementation forces the weights of all cooling devices in a thermal zone to add up to a 100. This complicates setups, as you need to know in advance how many cooling devices you are going to have. If you bind a new cooling device, you have to modify all the other cooling devices weights, which is error prone. Furthermore, you can't specify a "default" weight for platforms since that default value depends on the number of cooling devices in the platform. This patch generalizes the concept of weight by allowing any number to be a "weight". Weights are now relative to each other. Platforms that don't specify weights get the same default value for all their cooling devices, so all their cdevs are considered to be equally influential. It's important to note that previous users of the weights don't need to alter the code: percentages continue to work as they used to. This patch just removes the constraint of all the weights in a thermal zone having to add up to a 100. If they do, you get the same behavior as before. If they don't, fair share now works for that platform. Cc: Zhang Rui Cc: Eduardo Valentin Cc: Durgadoss R Acked-by: Durgadoss R Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- Documentation/thermal/sysfs-api.txt | 12 +++++++++--- drivers/thermal/fair_share.c | 26 +++++++++++++++++++++----- include/linux/thermal.h | 9 ++++++--- 3 files changed, 36 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 3625453ceef6..fc7dfe10778b 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -129,9 +129,15 @@ temperature) and throttle appropriate devices. This structure defines the following parameters that are used to bind a zone with a cooling device for a particular trip point. .cdev: The cooling device pointer - .weight: The 'influence' of a particular cooling device on this zone. - This is on a percentage scale. The sum of all these weights - (for a particular zone) cannot exceed 100. + .weight: The 'influence' of a particular cooling device on this + zone. This is relative to the rest of the cooling + devices. For example, if all cooling devices have a + weight of 1, then they all contribute the same. You can + use percentages if you want, but it's not mandatory. A + weight of 0 means that this cooling device doesn't + contribute to the cooling of this zone unless all cooling + devices have a weight of 0. If all weights are 0, then + they all contribute the same. .trip_mask:This is a bit mask that gives the binding relation between this thermal zone and cdev, for a particular trip point. If nth bit is set, then the cdev and thermal zone are bound diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 692f4053f08b..c2c10bbe24d6 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -59,13 +59,13 @@ static int get_trip_level(struct thermal_zone_device *tz) } static long get_target_state(struct thermal_zone_device *tz, - struct thermal_cooling_device *cdev, int weight, int level) + struct thermal_cooling_device *cdev, int percentage, int level) { unsigned long max_state; cdev->ops->get_max_state(cdev, &max_state); - return (long)(weight * level * max_state) / (100 * tz->trips); + return (long)(percentage * level * max_state) / (100 * tz->trips); } /** @@ -77,7 +77,7 @@ static long get_target_state(struct thermal_zone_device *tz, * * Parameters used for Throttling: * P1. max_state: Maximum throttle state exposed by the cooling device. - * P2. weight[i]/100: + * P2. percentage[i]/100: * How 'effective' the 'i'th device is, in cooling the given zone. * P3. cur_trip_level/max_no_of_trips: * This describes the extent to which the devices should be throttled. @@ -89,16 +89,32 @@ static long get_target_state(struct thermal_zone_device *tz, static int fair_share_throttle(struct thermal_zone_device *tz, int trip) { struct thermal_instance *instance; + int total_weight = 0; + int total_instance = 0; int cur_trip_level = get_trip_level(tz); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + total_weight += instance->weight; + total_instance++; + } + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + int percentage; struct thermal_cooling_device *cdev = instance->cdev; if (instance->trip != trip) continue; - instance->target = get_target_state(tz, cdev, - instance->weight, cur_trip_level); + if (!total_weight) + percentage = 100 / total_instance; + else + percentage = (instance->weight * 100) / total_weight; + + instance->target = get_target_state(tz, cdev, percentage, + cur_trip_level); instance->cdev->updated = false; thermal_cdev_update(cdev); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 00dacd4dfdce..bac0f52c7a1e 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -217,9 +217,12 @@ struct thermal_bind_params { /* * This is a measure of 'how effectively these devices can - * cool 'this' thermal zone. The shall be determined by platform - * characterization. This is on a 'percentage' scale. - * See Documentation/thermal/sysfs-api.txt for more information. + * cool 'this' thermal zone. It shall be determined by + * platform characterization. This value is relative to the + * rest of the weights so a cooling device whose weight is + * double that of another cooling device is twice as + * effective. See Documentation/thermal/sysfs-api.txt for more + * information. */ int weight; -- cgit v1.2.3 From e33df1d2f3a0141cd79e770f31999ba0dd7ebfa8 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:27 +0000 Subject: thermal: let governors have private data for each thermal zone A governor may need to store its current state between calls to throttle(). That state depends on the thermal zone, so store it as private data in struct thermal_zone_device. The governors may have two new ops: bind_to_tz() and unbind_from_tz(). When provided, these functions let governors do some initialization and teardown when they are bound/unbound to a tz and possibly store that information in the governor_data field of the struct thermal_zone_device. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal_core.c | 83 ++++++++++++++++++++++++++++++++++++++---- include/linux/thermal.h | 9 +++++ 2 files changed, 84 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 605d6919c1b6..be62b1622ed3 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -75,6 +75,58 @@ static struct thermal_governor *__find_governor(const char *name) return NULL; } +/** + * bind_previous_governor() - bind the previous governor of the thermal zone + * @tz: a valid pointer to a struct thermal_zone_device + * @failed_gov_name: the name of the governor that failed to register + * + * Register the previous governor of the thermal zone after a new + * governor has failed to be bound. + */ +static void bind_previous_governor(struct thermal_zone_device *tz, + const char *failed_gov_name) +{ + if (tz->governor && tz->governor->bind_to_tz) { + if (tz->governor->bind_to_tz(tz)) { + dev_err(&tz->device, + "governor %s failed to bind and the previous one (%s) failed to bind again, thermal zone %s has no governor\n", + failed_gov_name, tz->governor->name, tz->type); + tz->governor = NULL; + } + } +} + +/** + * thermal_set_governor() - Switch to another governor + * @tz: a valid pointer to a struct thermal_zone_device + * @new_gov: pointer to the new governor + * + * Change the governor of thermal zone @tz. + * + * Return: 0 on success, an error if the new governor's bind_to_tz() failed. + */ +static int thermal_set_governor(struct thermal_zone_device *tz, + struct thermal_governor *new_gov) +{ + int ret = 0; + + if (tz->governor && tz->governor->unbind_from_tz) + tz->governor->unbind_from_tz(tz); + + if (new_gov && new_gov->bind_to_tz) { + ret = new_gov->bind_to_tz(tz); + if (ret) { + bind_previous_governor(tz, new_gov->name); + + return ret; + } + } + + tz->governor = new_gov; + + return ret; +} + int thermal_register_governor(struct thermal_governor *governor) { int err; @@ -107,8 +159,15 @@ int thermal_register_governor(struct thermal_governor *governor) name = pos->tzp->governor_name; - if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) - pos->governor = governor; + if (!strncasecmp(name, governor->name, THERMAL_NAME_LENGTH)) { + int ret; + + ret = thermal_set_governor(pos, governor); + if (ret) + dev_err(&pos->device, + "Failed to set governor %s for thermal zone %s: %d\n", + governor->name, pos->type, ret); + } } mutex_unlock(&thermal_list_lock); @@ -134,7 +193,7 @@ void thermal_unregister_governor(struct thermal_governor *governor) list_for_each_entry(pos, &thermal_tz_list, node) { if (!strncasecmp(pos->governor->name, governor->name, THERMAL_NAME_LENGTH)) - pos->governor = NULL; + thermal_set_governor(pos, NULL); } mutex_unlock(&thermal_list_lock); @@ -770,8 +829,9 @@ policy_store(struct device *dev, struct device_attribute *attr, if (!gov) goto exit; - tz->governor = gov; - ret = count; + ret = thermal_set_governor(tz, gov); + if (!ret) + ret = count; exit: mutex_unlock(&tz->lock); @@ -1512,6 +1572,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, int result; int count; int passive = 0; + struct thermal_governor *governor; if (type && strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -1602,9 +1663,15 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, mutex_lock(&thermal_governor_lock); if (tz->tzp) - tz->governor = __find_governor(tz->tzp->governor_name); + governor = __find_governor(tz->tzp->governor_name); else - tz->governor = def_governor; + governor = def_governor; + + result = thermal_set_governor(tz, governor); + if (result) { + mutex_unlock(&thermal_governor_lock); + goto unregister; + } mutex_unlock(&thermal_governor_lock); @@ -1693,7 +1760,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_remove_file(&tz->device, &dev_attr_mode); device_remove_file(&tz->device, &dev_attr_policy); remove_trip_attrs(tz); - tz->governor = NULL; + thermal_set_governor(tz, NULL); thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index bac0f52c7a1e..edf9d53c67e6 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -165,6 +165,7 @@ struct thermal_attr { * @ops: operations this &thermal_zone_device supports * @tzp: thermal zone parameters * @governor: pointer to the governor for this thermal zone + * @governor_data: private pointer for governor data * @thermal_instances: list of &struct thermal_instance of this thermal zone * @idr: &struct idr to generate unique id for this zone's cooling * devices @@ -191,6 +192,7 @@ struct thermal_zone_device { struct thermal_zone_device_ops *ops; const struct thermal_zone_params *tzp; struct thermal_governor *governor; + void *governor_data; struct list_head thermal_instances; struct idr idr; struct mutex lock; @@ -201,12 +203,19 @@ struct thermal_zone_device { /** * struct thermal_governor - structure that holds thermal governor information * @name: name of the governor + * @bind_to_tz: callback called when binding to a thermal zone. If it + * returns 0, the governor is bound to the thermal zone, + * otherwise it fails. + * @unbind_from_tz: callback called when a governor is unbound from a + * thermal zone. * @throttle: callback called for every trip point even if temperature is * below the trip point temperature * @governor_list: node in thermal_governor_list (in thermal_core.c) */ struct thermal_governor { char name[THERMAL_NAME_LENGTH]; + int (*bind_to_tz)(struct thermal_zone_device *tz); + void (*unbind_from_tz)(struct thermal_zone_device *tz); int (*throttle)(struct thermal_zone_device *tz, int trip); struct list_head governor_list; }; -- cgit v1.2.3 From 35b11d2e3a66279a477e36cefb2603806295b8ce Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:28 +0000 Subject: thermal: extend the cooling device API to include power information Add three optional callbacks to the cooling device interface to allow them to express power. In addition to the callbacks, add helpers to identify cooling devices that implement the power cooling device API. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal_core.c | 52 ++++++++++++++++++++++++++++++++++++++++++ include/linux/thermal.h | 25 ++++++++++++++++++++ 2 files changed, 77 insertions(+) (limited to 'include') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index be62b1622ed3..263628b0e862 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -875,6 +875,58 @@ emul_temp_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); #endif/*CONFIG_THERMAL_EMULATION*/ +/** + * power_actor_get_max_power() - get the maximum power that a cdev can consume + * @cdev: pointer to &thermal_cooling_device + * @tz: a valid thermal zone device pointer + * @max_power: pointer in which to store the maximum power + * + * Calculate the maximum power consumption in milliwats that the + * cooling device can currently consume and store it in @max_power. + * + * Return: 0 on success, -EINVAL if @cdev doesn't support the + * power_actor API or -E* on other error. + */ +int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ + if (!cdev_is_power_actor(cdev)) + return -EINVAL; + + return cdev->ops->state2power(cdev, tz, 0, max_power); +} + +/** + * power_actor_set_power() - limit the maximum power that a cooling device can consume + * @cdev: pointer to &thermal_cooling_device + * @instance: thermal instance to update + * @power: the power in milliwatts + * + * Set the cooling device to consume at most @power milliwatts. + * + * Return: 0 on success, -EINVAL if the cooling device does not + * implement the power actor API or -E* for other failures. + */ +int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *instance, u32 power) +{ + unsigned long state; + int ret; + + if (!cdev_is_power_actor(cdev)) + return -EINVAL; + + ret = cdev->ops->power2state(cdev, instance->tz, power, &state); + if (ret) + return ret; + + instance->target = state; + cdev->updated = false; + thermal_cdev_update(cdev); + + return 0; +} + static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index edf9d53c67e6..bf3c55f405c2 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -63,6 +63,7 @@ struct thermal_zone_device; struct thermal_cooling_device; +struct thermal_instance; enum thermal_device_mode { THERMAL_DEVICE_DISABLED = 0, @@ -116,6 +117,12 @@ struct thermal_cooling_device_ops { int (*get_max_state) (struct thermal_cooling_device *, unsigned long *); int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *); int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); + int (*get_requested_power)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32 *); + int (*state2power)(struct thermal_cooling_device *, + struct thermal_zone_device *, unsigned long, u32 *); + int (*power2state)(struct thermal_cooling_device *, + struct thermal_zone_device *, u32, unsigned long *); }; struct thermal_cooling_device { @@ -331,6 +338,16 @@ void thermal_zone_of_sensor_unregister(struct device *dev, #endif #if IS_ENABLED(CONFIG_THERMAL) +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ + return cdev->ops->get_requested_power && cdev->ops->state2power && + cdev->ops->power2state; +} + +int power_actor_get_max_power(struct thermal_cooling_device *, + struct thermal_zone_device *tz, u32 *max_power); +int power_actor_set_power(struct thermal_cooling_device *, + struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, const struct thermal_zone_params *, int, int); @@ -359,6 +376,14 @@ struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, void thermal_cdev_update(struct thermal_cooling_device *); void thermal_notify_framework(struct thermal_zone_device *, int); #else +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ return false; } +static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power) +{ return 0; } +static inline int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *tz, u32 power) +{ return 0; } static inline struct thermal_zone_device *thermal_zone_device_register( const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, -- cgit v1.2.3 From c36cf07176316fbe6a4bdbc23afcb0cbf7822bf2 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Thu, 26 Feb 2015 19:00:29 +0000 Subject: thermal: cpu_cooling: implement the power cooling device API Add a basic power model to the cpu cooling device to implement the power cooling device API. The power model uses the current frequency, current load and OPPs for the power calculations. The cpus must have registered their OPPs using the OPP library. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Kapileshwar Singh Signed-off-by: Punit Agrawal Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- Documentation/thermal/cpu-cooling-api.txt | 156 +++++++- drivers/thermal/cpu_cooling.c | 583 +++++++++++++++++++++++++++++- include/linux/cpu_cooling.h | 39 ++ 3 files changed, 760 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt index 753e47cc2e20..71653584cd03 100644 --- a/Documentation/thermal/cpu-cooling-api.txt +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -36,8 +36,162 @@ the user. The registration APIs returns the cooling device pointer. np: pointer to the cooling device device tree node clip_cpus: cpumask of cpus where the frequency constraints will happen. -1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) +1.1.3 struct thermal_cooling_device *cpufreq_power_cooling_register( + const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) + +Similar to cpufreq_cooling_register, this function registers a cpufreq +cooling device. Using this function, the cooling device will +implement the power extensions by using a simple cpu power model. The +cpus must have registered their OPPs using the OPP library. + +The additional parameters are needed for the power model (See 2. Power +models). "capacitance" is the dynamic power coefficient (See 2.1 +Dynamic power). "plat_static_func" is a function to calculate the +static power consumed by these cpus (See 2.2 Static power). + +1.1.4 struct thermal_cooling_device *of_cpufreq_power_cooling_register( + struct device_node *np, const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) + +Similar to cpufreq_power_cooling_register, this function register a +cpufreq cooling device with power extensions using the device tree +information supplied by the np parameter. + +1.1.5 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) This interface function unregisters the "thermal-cpufreq-%x" cooling device. cdev: Cooling device pointer which has to be unregistered. + +2. Power models + +The power API registration functions provide a simple power model for +CPUs. The current power is calculated as dynamic + (optionally) +static power. This power model requires that the operating-points of +the CPUs are registered using the kernel's opp library and the +`cpufreq_frequency_table` is assigned to the `struct device` of the +cpu. If you are using CONFIG_CPUFREQ_DT then the +`cpufreq_frequency_table` should already be assigned to the cpu +device. + +The `plat_static_func` parameter of `cpufreq_power_cooling_register()` +and `of_cpufreq_power_cooling_register()` is optional. If you don't +provide it, only dynamic power will be considered. + +2.1 Dynamic power + +The dynamic power consumption of a processor depends on many factors. +For a given processor implementation the primary factors are: + +- The time the processor spends running, consuming dynamic power, as + compared to the time in idle states where dynamic consumption is + negligible. Herein we refer to this as 'utilisation'. +- The voltage and frequency levels as a result of DVFS. The DVFS + level is a dominant factor governing power consumption. +- In running time the 'execution' behaviour (instruction types, memory + access patterns and so forth) causes, in most cases, a second order + variation. In pathological cases this variation can be significant, + but typically it is of a much lesser impact than the factors above. + +A high level dynamic power consumption model may then be represented as: + +Pdyn = f(run) * Voltage^2 * Frequency * Utilisation + +f(run) here represents the described execution behaviour and its +result has a units of Watts/Hz/Volt^2 (this often expressed in +mW/MHz/uVolt^2) + +The detailed behaviour for f(run) could be modelled on-line. However, +in practice, such an on-line model has dependencies on a number of +implementation specific processor support and characterisation +factors. Therefore, in initial implementation that contribution is +represented as a constant coefficient. This is a simplification +consistent with the relative contribution to overall power variation. + +In this simplified representation our model becomes: + +Pdyn = Capacitance * Voltage^2 * Frequency * Utilisation + +Where `capacitance` is a constant that represents an indicative +running time dynamic power coefficient in fundamental units of +mW/MHz/uVolt^2. Typical values for mobile CPUs might lie in range +from 100 to 500. For reference, the approximate values for the SoC in +ARM's Juno Development Platform are 530 for the Cortex-A57 cluster and +140 for the Cortex-A53 cluster. + + +2.2 Static power + +Static leakage power consumption depends on a number of factors. For a +given circuit implementation the primary factors are: + +- Time the circuit spends in each 'power state' +- Temperature +- Operating voltage +- Process grade + +The time the circuit spends in each 'power state' for a given +evaluation period at first order means OFF or ON. However, +'retention' states can also be supported that reduce power during +inactive periods without loss of context. + +Note: The visibility of state entries to the OS can vary, according to +platform specifics, and this can then impact the accuracy of a model +based on OS state information alone. It might be possible in some +cases to extract more accurate information from system resources. + +The temperature, operating voltage and process 'grade' (slow to fast) +of the circuit are all significant factors in static leakage power +consumption. All of these have complex relationships to static power. + +Circuit implementation specific factors include the chosen silicon +process as well as the type, number and size of transistors in both +the logic gates and any RAM elements included. + +The static power consumption modelling must take into account the +power managed regions that are implemented. Taking the example of an +ARM processor cluster, the modelling would take into account whether +each CPU can be powered OFF separately or if only a single power +region is implemented for the complete cluster. + +In one view, there are others, a static power consumption model can +then start from a set of reference values for each power managed +region (e.g. CPU, Cluster/L2) in each state (e.g. ON, OFF) at an +arbitrary process grade, voltage and temperature point. These values +are then scaled for all of the following: the time in each state, the +process grade, the current temperature and the operating voltage. +However, since both implementation specific and complex relationships +dominate the estimate, the appropriate interface to the model from the +cpu cooling device is to provide a function callback that calculates +the static power in this platform. When registering the cpu cooling +device pass a function pointer that follows the `get_static_t` +prototype: + + int plat_get_static(cpumask_t *cpumask, int interval, + unsigned long voltage, u32 &power); + +`cpumask` is the cpumask of the cpus involved in the calculation. +`voltage` is the voltage at which they are operating. The function +should calculate the average static power for the last `interval` +milliseconds. It returns 0 on success, -E* on error. If it +succeeds, it should store the static power in `power`. Reading the +temperature of the cpus described by `cpumask` is left for +plat_get_static() to do as the platform knows best which thermal +sensor is closest to the cpu. + +If `plat_static_func` is NULL, static power is considered to be +negligible for this platform and only dynamic power is considered. + +The platform specific callback can then use any combination of tables +and/or equations to permute the estimated value. Process grade +information is not passed to the model since access to such data, from +on-chip measurement capability or manufacture time data, is platform +specific. + +Note: the significance of static power for CPUs in comparison to +dynamic power is highly dependent on implementation. Given the +potential complexity in implementation, the importance and accuracy of +its inclusion when using cpu cooling devices should be assessed on a +case by case basis. + diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index f65f0d109fc8..ba23150c7bde 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -44,6 +45,19 @@ * ... */ +/** + * struct power_table - frequency to power conversion + * @frequency: frequency in KHz + * @power: power in mW + * + * This structure is built when the cooling device registers and helps + * in translating frequency to power and viceversa. + */ +struct power_table { + u32 frequency; + u32 power; +}; + /** * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device @@ -58,6 +72,15 @@ * cpufreq frequencies. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * @node: list_head to link all cpufreq_cooling_device together. + * @last_load: load measured by the latest call to cpufreq_get_actual_power() + * @time_in_idle: previous reading of the absolute time that this cpu was idle + * @time_in_idle_timestamp: wall time of the last invocation of + * get_cpu_idle_time_us() + * @dyn_power_table: array of struct power_table for frequency to power + * conversion, sorted in ascending order. + * @dyn_power_table_entries: number of entries in the @dyn_power_table array + * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered + * @plat_get_static_power: callback to calculate the static power * * This structure is required for keeping information of each registered * cpufreq_cooling_device. @@ -71,6 +94,13 @@ struct cpufreq_cooling_device { unsigned int *freq_table; /* In descending order */ struct cpumask allowed_cpus; struct list_head node; + u32 last_load; + u64 *time_in_idle; + u64 *time_in_idle_timestamp; + struct power_table *dyn_power_table; + int dyn_power_table_entries; + struct device *cpu_dev; + get_static_t plat_get_static_power; }; static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); @@ -167,6 +197,39 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) } EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level); +static void update_cpu_device(int cpu) +{ + struct cpufreq_cooling_device *cpufreq_dev; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { + cpufreq_dev->cpu_dev = get_cpu_device(cpu); + if (!cpufreq_dev->cpu_dev) { + dev_warn(&cpufreq_dev->cool_dev->device, + "No cpu device for new policy cpu %d\n", + cpu); + } + break; + } + } + mutex_unlock(&cooling_cpufreq_lock); +} + +static void remove_cpu_device(int cpu) +{ + struct cpufreq_cooling_device *cpufreq_dev; + + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { + cpufreq_dev->cpu_dev = NULL; + break; + } + } + mutex_unlock(&cooling_cpufreq_lock); +} + /** * cpufreq_thermal_notifier - notifier callback for cpufreq policy change. * @nb: struct notifier_block * with callback info. @@ -186,23 +249,240 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, unsigned long max_freq = 0; struct cpufreq_cooling_device *cpufreq_dev; - if (event != CPUFREQ_ADJUST) - return 0; + switch (event) { - mutex_lock(&cooling_cpufreq_lock); - list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { - if (!cpumask_test_cpu(policy->cpu, - &cpufreq_dev->allowed_cpus)) + case CPUFREQ_ADJUST: + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (!cpumask_test_cpu(policy->cpu, + &cpufreq_dev->allowed_cpus)) + continue; + + max_freq = cpufreq_dev->cpufreq_val; + + if (policy->max != max_freq) + cpufreq_verify_within_limits(policy, 0, + max_freq); + } + mutex_unlock(&cooling_cpufreq_lock); + break; + + case CPUFREQ_CREATE_POLICY: + update_cpu_device(policy->cpu); + break; + case CPUFREQ_REMOVE_POLICY: + remove_cpu_device(policy->cpu); + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +/** + * build_dyn_power_table() - create a dynamic power to frequency table + * @cpufreq_device: the cpufreq cooling device in which to store the table + * @capacitance: dynamic power coefficient for these cpus + * + * Build a dynamic power to frequency table for this cpu and store it + * in @cpufreq_device. This table will be used in cpu_power_to_freq() and + * cpu_freq_to_power() to convert between power and frequency + * efficiently. Power is stored in mW, frequency in KHz. The + * resulting table is in ascending order. + * + * Return: 0 on success, -E* on error. + */ +static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device, + u32 capacitance) +{ + struct power_table *power_table; + struct dev_pm_opp *opp; + struct device *dev = NULL; + int num_opps = 0, cpu, i, ret = 0; + unsigned long freq; + + rcu_read_lock(); + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + dev = get_cpu_device(cpu); + if (!dev) { + dev_warn(&cpufreq_device->cool_dev->device, + "No cpu device for cpu %d\n", cpu); continue; + } - max_freq = cpufreq_dev->cpufreq_val; + num_opps = dev_pm_opp_get_opp_count(dev); + if (num_opps > 0) { + break; + } else if (num_opps < 0) { + ret = num_opps; + goto unlock; + } + } - if (policy->max != max_freq) - cpufreq_verify_within_limits(policy, 0, max_freq); + if (num_opps == 0) { + ret = -EINVAL; + goto unlock; } - mutex_unlock(&cooling_cpufreq_lock); - return 0; + power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL); + + for (freq = 0, i = 0; + opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp); + freq++, i++) { + u32 freq_mhz, voltage_mv; + u64 power; + + freq_mhz = freq / 1000000; + voltage_mv = dev_pm_opp_get_voltage(opp) / 1000; + + /* + * Do the multiplication with MHz and millivolt so as + * to not overflow. + */ + power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv; + do_div(power, 1000000000); + + /* frequency is stored in power_table in KHz */ + power_table[i].frequency = freq / 1000; + + /* power is stored in mW */ + power_table[i].power = power; + } + + if (i == 0) { + ret = PTR_ERR(opp); + goto unlock; + } + + cpufreq_device->cpu_dev = dev; + cpufreq_device->dyn_power_table = power_table; + cpufreq_device->dyn_power_table_entries = i; + +unlock: + rcu_read_unlock(); + return ret; +} + +static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device, + u32 freq) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (freq < pt[i].frequency) + break; + + return pt[i - 1].power; +} + +static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device, + u32 power) +{ + int i; + struct power_table *pt = cpufreq_device->dyn_power_table; + + for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++) + if (power < pt[i].power) + break; + + return pt[i - 1].frequency; +} + +/** + * get_load() - get load for a cpu since last updated + * @cpufreq_device: &struct cpufreq_cooling_device for this cpu + * @cpu: cpu number + * + * Return: The average load of cpu @cpu in percentage since this + * function was last called. + */ +static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu) +{ + u32 load; + u64 now, now_idle, delta_time, delta_idle; + + now_idle = get_cpu_idle_time(cpu, &now, 0); + delta_idle = now_idle - cpufreq_device->time_in_idle[cpu]; + delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu]; + + if (delta_time <= delta_idle) + load = 0; + else + load = div64_u64(100 * (delta_time - delta_idle), delta_time); + + cpufreq_device->time_in_idle[cpu] = now_idle; + cpufreq_device->time_in_idle_timestamp[cpu] = now; + + return load; +} + +/** + * get_static_power() - calculate the static power consumed by the cpus + * @cpufreq_device: struct &cpufreq_cooling_device for this cpu cdev + * @tz: thermal zone device in which we're operating + * @freq: frequency in KHz + * @power: pointer in which to store the calculated static power + * + * Calculate the static power consumed by the cpus described by + * @cpu_actor running at frequency @freq. This function relies on a + * platform specific function that should have been provided when the + * actor was registered. If it wasn't, the static power is assumed to + * be negligible. The calculated static power is stored in @power. + * + * Return: 0 on success, -E* on failure. + */ +static int get_static_power(struct cpufreq_cooling_device *cpufreq_device, + struct thermal_zone_device *tz, unsigned long freq, + u32 *power) +{ + struct dev_pm_opp *opp; + unsigned long voltage; + struct cpumask *cpumask = &cpufreq_device->allowed_cpus; + unsigned long freq_hz = freq * 1000; + + if (!cpufreq_device->plat_get_static_power || + !cpufreq_device->cpu_dev) { + *power = 0; + return 0; + } + + rcu_read_lock(); + + opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz, + true); + voltage = dev_pm_opp_get_voltage(opp); + + rcu_read_unlock(); + + if (voltage == 0) { + dev_warn_ratelimited(cpufreq_device->cpu_dev, + "Failed to get voltage for frequency %lu: %ld\n", + freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0); + return -EINVAL; + } + + return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay, + voltage, power); +} + +/** + * get_dynamic_power() - calculate the dynamic power + * @cpufreq_device: &cpufreq_cooling_device for this cdev + * @freq: current frequency + * + * Return: the dynamic power consumed by the cpus described by + * @cpufreq_device. + */ +static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device, + unsigned long freq) +{ + u32 raw_cpu_power; + + raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq); + return (raw_cpu_power * cpufreq_device->last_load) / 100; } /* cpufreq cooling device callback functions are defined below */ @@ -280,8 +560,169 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, return 0; } +/** + * cpufreq_get_requested_power() - get the current power + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: pointer in which to store the resulting power + * + * Calculate the current power consumption of the cpus in milliwatts + * and store it in @power. This function should actually calculate + * the requested power, but it's hard to get the frequency that + * cpufreq would have assigned if there were no thermal limits. + * Instead, we calculate the current power on the assumption that the + * immediate future will look like the immediate past. + * + * We use the current frequency and the average load since this + * function was last called. In reality, there could have been + * multiple opps since this function was last called and that affects + * the load calculation. While it's not perfectly accurate, this + * simplification is good enough and works. REVISIT this, as more + * complex code may be needed if experiments show that it's not + * accurate enough. + * + * Return: 0 on success, -E* if getting the static power failed. + */ +static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + u32 *power) +{ + unsigned long freq; + int cpu, ret; + u32 static_power, dynamic_power, total_load = 0; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + freq = cpufreq_quick_get(cpumask_any(&cpufreq_device->allowed_cpus)); + + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { + u32 load; + + if (cpu_online(cpu)) + load = get_load(cpufreq_device, cpu); + else + load = 0; + + total_load += load; + } + + cpufreq_device->last_load = total_load; + + dynamic_power = get_dynamic_power(cpufreq_device, freq); + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) + return ret; + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_state2power() - convert a cpu cdev state to power consumed + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @state: cooling device state to be converted + * @power: pointer in which to store the resulting power + * + * Convert cooling device state @state into power consumption in + * milliwatts assuming 100% load. Store the calculated power in + * @power. + * + * Return: 0 on success, -EINVAL if the cooling device state could not + * be converted into a frequency or other -E* if there was an error + * when calculating the static power. + */ +static int cpufreq_state2power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, + unsigned long state, u32 *power) +{ + unsigned int freq, num_cpus; + cpumask_t cpumask; + u32 static_power, dynamic_power; + int ret; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpumask_and(&cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask); + num_cpus = cpumask_weight(&cpumask); + + /* None of our cpus are online, so no power */ + if (num_cpus == 0) { + *power = 0; + return 0; + } + + freq = cpufreq_device->freq_table[state]; + if (!freq) + return -EINVAL; + + dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus; + ret = get_static_power(cpufreq_device, tz, freq, &static_power); + if (ret) + return ret; + + *power = static_power + dynamic_power; + return 0; +} + +/** + * cpufreq_power2state() - convert power to a cooling device state + * @cdev: &thermal_cooling_device pointer + * @tz: a valid thermal zone device pointer + * @power: power in milliwatts to be converted + * @state: pointer in which to store the resulting state + * + * Calculate a cooling device state for the cpus described by @cdev + * that would allow them to consume at most @power mW and store it in + * @state. Note that this calculation depends on external factors + * such as the cpu load or the current static power. Calling this + * function with the same power as input can yield different cooling + * device states depending on those external factors. + * + * Return: 0 on success, -ENODEV if no cpus are online or -EINVAL if + * the calculated frequency could not be converted to a valid state. + * The latter should not happen unless the frequencies available to + * cpufreq have changed since the initialization of the cpu cooling + * device. + */ +static int cpufreq_power2state(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 power, + unsigned long *state) +{ + unsigned int cpu, cur_freq, target_freq; + int ret; + s32 dyn_power; + u32 last_load, normalised_power, static_power; + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + + cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask); + + /* None of our cpus are online */ + if (cpu >= nr_cpu_ids) + return -ENODEV; + + cur_freq = cpufreq_quick_get(cpu); + ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power); + if (ret) + return ret; + + dyn_power = power - static_power; + dyn_power = dyn_power > 0 ? dyn_power : 0; + last_load = cpufreq_device->last_load ?: 1; + normalised_power = (dyn_power * 100) / last_load; + target_freq = cpu_power_to_freq(cpufreq_device, normalised_power); + + *state = cpufreq_cooling_get_level(cpu, target_freq); + if (*state == THERMAL_CSTATE_INVALID) { + dev_warn_ratelimited(&cdev->device, + "Failed to convert %dKHz for cpu %d into a cdev state\n", + target_freq, cpu); + return -EINVAL; + } + + return 0; +} + /* Bind cpufreq callbacks to thermal cooling device ops */ -static struct thermal_cooling_device_ops const cpufreq_cooling_ops = { +static struct thermal_cooling_device_ops cpufreq_cooling_ops = { .get_max_state = cpufreq_get_max_state, .get_cur_state = cpufreq_get_cur_state, .set_cur_state = cpufreq_set_cur_state, @@ -311,6 +752,9 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. * Normally this should be same as cpufreq policy->related_cpus. + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -322,13 +766,14 @@ static unsigned int find_next_max(struct cpufreq_frequency_table *table, */ static struct thermal_cooling_device * __cpufreq_cooling_register(struct device_node *np, - const struct cpumask *clip_cpus) + const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev; char dev_name[THERMAL_NAME_LENGTH]; struct cpufreq_frequency_table *pos, *table; - unsigned int freq, i; + unsigned int freq, i, num_cpus; int ret; table = cpufreq_frequency_get_table(cpumask_first(clip_cpus)); @@ -341,6 +786,23 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); + num_cpus = cpumask_weight(clip_cpus); + cpufreq_dev->time_in_idle = kcalloc(num_cpus, + sizeof(*cpufreq_dev->time_in_idle), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_cdev; + } + + cpufreq_dev->time_in_idle_timestamp = + kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp), + GFP_KERNEL); + if (!cpufreq_dev->time_in_idle_timestamp) { + cool_dev = ERR_PTR(-ENOMEM); + goto free_time_in_idle; + } + /* Find max levels */ cpufreq_for_each_valid_entry(pos, table) cpufreq_dev->max_level++; @@ -349,7 +811,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_dev->max_level, GFP_KERNEL); if (!cpufreq_dev->freq_table) { cool_dev = ERR_PTR(-ENOMEM); - goto free_cdev; + goto free_time_in_idle_timestamp; } /* max_level is an index, not a counter */ @@ -357,6 +819,20 @@ __cpufreq_cooling_register(struct device_node *np, cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); + if (capacitance) { + cpufreq_cooling_ops.get_requested_power = + cpufreq_get_requested_power; + cpufreq_cooling_ops.state2power = cpufreq_state2power; + cpufreq_cooling_ops.power2state = cpufreq_power2state; + cpufreq_dev->plat_get_static_power = plat_static_func; + + ret = build_dyn_power_table(cpufreq_dev, capacitance); + if (ret) { + cool_dev = ERR_PTR(ret); + goto free_table; + } + } + ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { cool_dev = ERR_PTR(ret); @@ -402,6 +878,10 @@ remove_idr: release_idr(&cpufreq_idr, cpufreq_dev->id); free_table: kfree(cpufreq_dev->freq_table); +free_time_in_idle_timestamp: + kfree(cpufreq_dev->time_in_idle_timestamp); +free_time_in_idle: + kfree(cpufreq_dev->time_in_idle); free_cdev: kfree(cpufreq_dev); @@ -422,7 +902,7 @@ free_cdev: struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus) { - return __cpufreq_cooling_register(NULL, clip_cpus); + return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(cpufreq_cooling_register); @@ -446,10 +926,77 @@ of_cpufreq_cooling_register(struct device_node *np, if (!np) return ERR_PTR(-EINVAL); - return __cpufreq_cooling_register(np, clip_cpus); + return __cpufreq_cooling_register(np, clip_cpus, 0, NULL); } EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); +/** + * cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this function, the + * cooling device will implement the power extensions by using a + * simple cpu power model. The cpus must have registered their OPPs + * using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance, + get_static_t plat_static_func) +{ + return __cpufreq_cooling_register(NULL, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(cpufreq_power_cooling_register); + +/** + * of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions + * @np: a valid struct device_node to the cooling device device tree node + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + * @capacitance: dynamic power coefficient for these cpus + * @plat_static_func: function to calculate the static power consumed by these + * cpus (optional) + * + * This interface function registers the cpufreq cooling device with + * the name "thermal-cpufreq-%x". This api can support multiple + * instances of cpufreq cooling devices. Using this API, the cpufreq + * cooling device will be linked to the device tree node provided. + * Using this function, the cooling device will implement the power + * extensions by using a simple cpu power model. The cpus must have + * registered their OPPs using the OPP library. + * + * An optional @plat_static_func may be provided to calculate the + * static power consumed by these cpus. If the platform's static + * power consumption is unknown or negligible, make it NULL. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + if (!np) + return ERR_PTR(-EINVAL); + + return __cpufreq_cooling_register(np, clip_cpus, capacitance, + plat_static_func); +} +EXPORT_SYMBOL(of_cpufreq_power_cooling_register); + /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. @@ -475,6 +1022,8 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); + kfree(cpufreq_dev->time_in_idle_timestamp); + kfree(cpufreq_dev->time_in_idle); kfree(cpufreq_dev->freq_table); kfree(cpufreq_dev); } diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index bd955270d5aa..c156f5082758 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -28,6 +28,9 @@ #include #include +typedef int (*get_static_t)(cpumask_t *cpumask, int interval, + unsigned long voltage, u32 *power); + #ifdef CONFIG_CPU_THERMAL /** * cpufreq_cooling_register - function to create cpufreq cooling device. @@ -36,6 +39,10 @@ struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus); +struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func); + /** * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. * @np: a valid struct device_node to the cooling device device tree node. @@ -45,6 +52,12 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus); struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus); + +struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func); #else static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, @@ -52,6 +65,15 @@ of_cpufreq_cooling_register(struct device_node *np, { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} #endif /** @@ -67,12 +89,29 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) { return ERR_PTR(-ENOSYS); } +static inline struct thermal_cooling_device * +cpufreq_power_cooling_register(const struct cpumask *clip_cpus, + u32 capacitance, get_static_t plat_static_func) +{ + return NULL; +} + static inline struct thermal_cooling_device * of_cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus) { return ERR_PTR(-ENOSYS); } + +static inline struct thermal_cooling_device * +of_cpufreq_power_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus, + u32 capacitance, + get_static_t plat_static_func) +{ + return NULL; +} + static inline void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) { -- cgit v1.2.3 From 6b775e870c56c59c3e16531ea2307b797395f9f7 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 2 Mar 2015 17:17:19 +0000 Subject: thermal: introduce the Power Allocator governor The power allocator governor is a thermal governor that controls system and device power allocation to control temperature. Conceptually, the implementation divides the sustainable power of a thermal zone among all the heat sources in that zone. This governor relies on "power actors", entities that represent heat sources. They can report current and maximum power consumption and can set a given maximum power consumption, usually via a cooling device. The governor uses a Proportional Integral Derivative (PID) controller driven by the temperature of the thermal zone. The output of the controller is a power budget that is then allocated to each power actor that can have bearing on the temperature we are trying to control. It decides how much power to give each cooling device based on the performance they are requesting. The PID controller ensures that the total power budget does not exceed the control temperature. Cc: Zhang Rui Cc: Eduardo Valentin Signed-off-by: Punit Agrawal Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- Documentation/thermal/power_allocator.txt | 247 ++++++++++++++ drivers/thermal/Kconfig | 15 + drivers/thermal/Makefile | 1 + drivers/thermal/power_allocator.c | 520 ++++++++++++++++++++++++++++++ drivers/thermal/thermal_core.c | 9 +- drivers/thermal/thermal_core.h | 8 + include/linux/thermal.h | 37 ++- 7 files changed, 830 insertions(+), 7 deletions(-) create mode 100644 Documentation/thermal/power_allocator.txt create mode 100644 drivers/thermal/power_allocator.c (limited to 'include') diff --git a/Documentation/thermal/power_allocator.txt b/Documentation/thermal/power_allocator.txt new file mode 100644 index 000000000000..c3797b529991 --- /dev/null +++ b/Documentation/thermal/power_allocator.txt @@ -0,0 +1,247 @@ +Power allocator governor tunables +================================= + +Trip points +----------- + +The governor requires the following two passive trip points: + +1. "switch on" trip point: temperature above which the governor + control loop starts operating. This is the first passive trip + point of the thermal zone. + +2. "desired temperature" trip point: it should be higher than the + "switch on" trip point. This the target temperature the governor + is controlling for. This is the last passive trip point of the + thermal zone. + +PID Controller +-------------- + +The power allocator governor implements a +Proportional-Integral-Derivative controller (PID controller) with +temperature as the control input and power as the controlled output: + + P_max = k_p * e + k_i * err_integral + k_d * diff_err + sustainable_power + +where + e = desired_temperature - current_temperature + err_integral is the sum of previous errors + diff_err = e - previous_error + +It is similar to the one depicted below: + + k_d + | +current_temp | + | v + | +----------+ +---+ + | +----->| diff_err |-->| X |------+ + | | +----------+ +---+ | + | | | tdp actor + | | k_i | | get_requested_power() + | | | | | | | + | | | | | | | ... + v | v v v v v + +---+ | +-------+ +---+ +---+ +---+ +----------+ + | S |-------+----->| sum e |----->| X |--->| S |-->| S |-->|power | + +---+ | +-------+ +---+ +---+ +---+ |allocation| + ^ | ^ +----------+ + | | | | | + | | +---+ | | | + | +------->| X |-------------------+ v v + | +---+ granted performance +desired_temperature ^ + | + | + k_po/k_pu + +Sustainable power +----------------- + +An estimate of the sustainable dissipatable power (in mW) should be +provided while registering the thermal zone. This estimates the +sustained power that can be dissipated at the desired control +temperature. This is the maximum sustained power for allocation at +the desired maximum temperature. The actual sustained power can vary +for a number of reasons. The closed loop controller will take care of +variations such as environmental conditions, and some factors related +to the speed-grade of the silicon. `sustainable_power` is therefore +simply an estimate, and may be tuned to affect the aggressiveness of +the thermal ramp. For reference, the sustainable power of a 4" phone +is typically 2000mW, while on a 10" tablet is around 4500mW (may vary +depending on screen size). + +If you are using device tree, do add it as a property of the +thermal-zone. For example: + + thermal-zones { + soc_thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <2500>; + ... + +Instead, if the thermal zone is registered from the platform code, pass a +`thermal_zone_params` that has a `sustainable_power`. If no +`thermal_zone_params` were being passed, then something like below +will suffice: + + static const struct thermal_zone_params tz_params = { + .sustainable_power = 3500, + }; + +and then pass `tz_params` as the 5th parameter to +`thermal_zone_device_register()` + +k_po and k_pu +------------- + +The implementation of the PID controller in the power allocator +thermal governor allows the configuration of two proportional term +constants: `k_po` and `k_pu`. `k_po` is the proportional term +constant during temperature overshoot periods (current temperature is +above "desired temperature" trip point). Conversely, `k_pu` is the +proportional term constant during temperature undershoot periods +(current temperature below "desired temperature" trip point). + +These controls are intended as the primary mechanism for configuring +the permitted thermal "ramp" of the system. For instance, a lower +`k_pu` value will provide a slower ramp, at the cost of capping +available capacity at a low temperature. On the other hand, a high +value of `k_pu` will result in the governor granting very high power +whilst temperature is low, and may lead to temperature overshooting. + +The default value for `k_pu` is: + + 2 * sustainable_power / (desired_temperature - switch_on_temp) + +This means that at `switch_on_temp` the output of the controller's +proportional term will be 2 * `sustainable_power`. The default value +for `k_po` is: + + sustainable_power / (desired_temperature - switch_on_temp) + +Focusing on the proportional and feed forward values of the PID +controller equation we have: + + P_max = k_p * e + sustainable_power + +The proportional term is proportional to the difference between the +desired temperature and the current one. When the current temperature +is the desired one, then the proportional component is zero and +`P_max` = `sustainable_power`. That is, the system should operate in +thermal equilibrium under constant load. `sustainable_power` is only +an estimate, which is the reason for closed-loop control such as this. + +Expanding `k_pu` we get: + P_max = 2 * sustainable_power * (T_set - T) / (T_set - T_on) + + sustainable_power + +where + T_set is the desired temperature + T is the current temperature + T_on is the switch on temperature + +When the current temperature is the switch_on temperature, the above +formula becomes: + + P_max = 2 * sustainable_power * (T_set - T_on) / (T_set - T_on) + + sustainable_power = 2 * sustainable_power + sustainable_power = + 3 * sustainable_power + +Therefore, the proportional term alone linearly decreases power from +3 * `sustainable_power` to `sustainable_power` as the temperature +rises from the switch on temperature to the desired temperature. + +k_i and integral_cutoff +----------------------- + +`k_i` configures the PID loop's integral term constant. This term +allows the PID controller to compensate for long term drift and for +the quantized nature of the output control: cooling devices can't set +the exact power that the governor requests. When the temperature +error is below `integral_cutoff`, errors are accumulated in the +integral term. This term is then multiplied by `k_i` and the result +added to the output of the controller. Typically `k_i` is set low (1 +or 2) and `integral_cutoff` is 0. + +k_d +--- + +`k_d` configures the PID loop's derivative term constant. It's +recommended to leave it as the default: 0. + +Cooling device power API +======================== + +Cooling devices controlled by this governor must supply the additional +"power" API in their `cooling_device_ops`. It consists on three ops: + +1. int get_requested_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *power); +@cdev: The `struct thermal_cooling_device` pointer +@tz: thermal zone in which we are currently operating +@power: pointer in which to store the calculated power + +`get_requested_power()` calculates the power requested by the device +in milliwatts and stores it in @power . It should return 0 on +success, -E* on failure. This is currently used by the power +allocator governor to calculate how much power to give to each cooling +device. + +2. int state2power(struct thermal_cooling_device *cdev, struct + thermal_zone_device *tz, unsigned long state, u32 *power); +@cdev: The `struct thermal_cooling_device` pointer +@tz: thermal zone in which we are currently operating +@state: A cooling device state +@power: pointer in which to store the equivalent power + +Convert cooling device state @state into power consumption in +milliwatts and store it in @power. It should return 0 on success, -E* +on failure. This is currently used by thermal core to calculate the +maximum power that an actor can consume. + +3. int power2state(struct thermal_cooling_device *cdev, u32 power, + unsigned long *state); +@cdev: The `struct thermal_cooling_device` pointer +@power: power in milliwatts +@state: pointer in which to store the resulting state + +Calculate a cooling device state that would make the device consume at +most @power mW and store it in @state. It should return 0 on success, +-E* on failure. This is currently used by the thermal core to convert +a given power set by the power allocator governor to a state that the +cooling device can set. It is a function because this conversion may +depend on external factors that may change so this function should the +best conversion given "current circumstances". + +Cooling device weights +---------------------- + +Weights are a mechanism to bias the allocation among cooling +devices. They express the relative power efficiency of different +cooling devices. Higher weight can be used to express higher power +efficiency. Weighting is relative such that if each cooling device +has a weight of one they are considered equal. This is particularly +useful in heterogeneous systems where two cooling devices may perform +the same kind of compute, but with different efficiency. For example, +a system with two different types of processors. + +If the thermal zone is registered using +`thermal_zone_device_register()` (i.e., platform code), then weights +are passed as part of the thermal zone's `thermal_bind_parameters`. +If the platform is registered using device tree, then they are passed +as the `contribution` property of each map in the `cooling-maps` node. + +Limitations of the power allocator governor +=========================================== + +The power allocator governor's PID controller works best if there is a +periodic tick. If you have a driver that calls +`thermal_zone_device_update()` (or anything that ends up calling the +governor's `throttle()` function) repetitively, the governor response +won't be very good. Note that this is not particular to this +governor, step-wise will also misbehave if you call its throttle() +faster than the normal thermal framework tick (due to interrupts for +example) as it will overreact. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 30aee81e9f5b..a1b43eab0a70 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -71,6 +71,14 @@ config THERMAL_DEFAULT_GOV_USER_SPACE Select this if you want to let the user space manage the platform thermals. +config THERMAL_DEFAULT_GOV_POWER_ALLOCATOR + bool "power_allocator" + select THERMAL_GOV_POWER_ALLOCATOR + help + Select this if you want to control temperature based on + system and device power allocation. This governor can only + operate on cooling devices that implement the power API. + endchoice config THERMAL_GOV_FAIR_SHARE @@ -99,6 +107,13 @@ config THERMAL_GOV_USER_SPACE help Enable this to let the user space manage the platform thermals. +config THERMAL_GOV_POWER_ALLOCATOR + bool "Power allocator thermal governor" + select THERMAL_POWER_ACTOR + help + Enable this to manage platform thermals by dynamically + allocating and limiting power to devices. + config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 1fe86652cfb6..b1783cf37ed2 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -14,6 +14,7 @@ thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o +thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o # cpufreq cooling thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c new file mode 100644 index 000000000000..67982d79b76c --- /dev/null +++ b/drivers/thermal/power_allocator.c @@ -0,0 +1,520 @@ +/* + * A power allocator to manage temperature + * + * Copyright (C) 2014 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "Power allocator: " fmt + +#include +#include +#include + +#include "thermal_core.h" + +#define FRAC_BITS 10 +#define int_to_frac(x) ((x) << FRAC_BITS) +#define frac_to_int(x) ((x) >> FRAC_BITS) + +/** + * mul_frac() - multiply two fixed-point numbers + * @x: first multiplicand + * @y: second multiplicand + * + * Return: the result of multiplying two fixed-point numbers. The + * result is also a fixed-point number. + */ +static inline s64 mul_frac(s64 x, s64 y) +{ + return (x * y) >> FRAC_BITS; +} + +/** + * div_frac() - divide two fixed-point numbers + * @x: the dividend + * @y: the divisor + * + * Return: the result of dividing two fixed-point numbers. The + * result is also a fixed-point number. + */ +static inline s64 div_frac(s64 x, s64 y) +{ + return div_s64(x << FRAC_BITS, y); +} + +/** + * struct power_allocator_params - parameters for the power allocator governor + * @err_integral: accumulated error in the PID controller. + * @prev_err: error in the previous iteration of the PID controller. + * Used to calculate the derivative term. + * @trip_switch_on: first passive trip point of the thermal zone. The + * governor switches on when this trip point is crossed. + * @trip_max_desired_temperature: last passive trip point of the thermal + * zone. The temperature we are + * controlling for. + */ +struct power_allocator_params { + s64 err_integral; + s32 prev_err; + int trip_switch_on; + int trip_max_desired_temperature; +}; + +/** + * pid_controller() - PID controller + * @tz: thermal zone we are operating in + * @current_temp: the current temperature in millicelsius + * @control_temp: the target temperature in millicelsius + * @max_allocatable_power: maximum allocatable power for this thermal zone + * + * This PID controller increases the available power budget so that the + * temperature of the thermal zone gets as close as possible to + * @control_temp and limits the power if it exceeds it. k_po is the + * proportional term when we are overshooting, k_pu is the + * proportional term when we are undershooting. integral_cutoff is a + * threshold below which we stop accumulating the error. The + * accumulated error is only valid if the requested power will make + * the system warmer. If the system is mostly idle, there's no point + * in accumulating positive error. + * + * Return: The power budget for the next period. + */ +static u32 pid_controller(struct thermal_zone_device *tz, + unsigned long current_temp, + unsigned long control_temp, + u32 max_allocatable_power) +{ + s64 p, i, d, power_range; + s32 err, max_power_frac; + struct power_allocator_params *params = tz->governor_data; + + max_power_frac = int_to_frac(max_allocatable_power); + + err = ((s32)control_temp - (s32)current_temp); + err = int_to_frac(err); + + /* Calculate the proportional term */ + p = mul_frac(err < 0 ? tz->tzp->k_po : tz->tzp->k_pu, err); + + /* + * Calculate the integral term + * + * if the error is less than cut off allow integration (but + * the integral is limited to max power) + */ + i = mul_frac(tz->tzp->k_i, params->err_integral); + + if (err < int_to_frac(tz->tzp->integral_cutoff)) { + s64 i_next = i + mul_frac(tz->tzp->k_i, err); + + if (abs64(i_next) < max_power_frac) { + i = i_next; + params->err_integral += err; + } + } + + /* + * Calculate the derivative term + * + * We do err - prev_err, so with a positive k_d, a decreasing + * error (i.e. driving closer to the line) results in less + * power being applied, slowing down the controller) + */ + d = mul_frac(tz->tzp->k_d, err - params->prev_err); + d = div_frac(d, tz->passive_delay); + params->prev_err = err; + + power_range = p + i + d; + + /* feed-forward the known sustainable dissipatable power */ + power_range = tz->tzp->sustainable_power + frac_to_int(power_range); + + return clamp(power_range, (s64)0, (s64)max_allocatable_power); +} + +/** + * divvy_up_power() - divvy the allocated power between the actors + * @req_power: each actor's requested power + * @max_power: each actor's maximum available power + * @num_actors: size of the @req_power, @max_power and @granted_power's array + * @total_req_power: sum of @req_power + * @power_range: total allocated power + * @granted_power: output array: each actor's granted power + * @extra_actor_power: an appropriately sized array to be used in the + * function as temporary storage of the extra power given + * to the actors + * + * This function divides the total allocated power (@power_range) + * fairly between the actors. It first tries to give each actor a + * share of the @power_range according to how much power it requested + * compared to the rest of the actors. For example, if only one actor + * requests power, then it receives all the @power_range. If + * three actors each requests 1mW, each receives a third of the + * @power_range. + * + * If any actor received more than their maximum power, then that + * surplus is re-divvied among the actors based on how far they are + * from their respective maximums. + * + * Granted power for each actor is written to @granted_power, which + * should've been allocated by the calling function. + */ +static void divvy_up_power(u32 *req_power, u32 *max_power, int num_actors, + u32 total_req_power, u32 power_range, + u32 *granted_power, u32 *extra_actor_power) +{ + u32 extra_power, capped_extra_power; + int i; + + /* + * Prevent division by 0 if none of the actors request power. + */ + if (!total_req_power) + total_req_power = 1; + + capped_extra_power = 0; + extra_power = 0; + for (i = 0; i < num_actors; i++) { + u64 req_range = req_power[i] * power_range; + + granted_power[i] = div_u64(req_range, total_req_power); + + if (granted_power[i] > max_power[i]) { + extra_power += granted_power[i] - max_power[i]; + granted_power[i] = max_power[i]; + } + + extra_actor_power[i] = max_power[i] - granted_power[i]; + capped_extra_power += extra_actor_power[i]; + } + + if (!extra_power) + return; + + /* + * Re-divvy the reclaimed extra among actors based on + * how far they are from the max + */ + extra_power = min(extra_power, capped_extra_power); + if (capped_extra_power > 0) + for (i = 0; i < num_actors; i++) + granted_power[i] += (extra_actor_power[i] * + extra_power) / capped_extra_power; +} + +static int allocate_power(struct thermal_zone_device *tz, + unsigned long current_temp, + unsigned long control_temp) +{ + struct thermal_instance *instance; + struct power_allocator_params *params = tz->governor_data; + u32 *req_power, *max_power, *granted_power, *extra_actor_power; + u32 total_req_power, max_allocatable_power; + u32 power_range; + int i, num_actors, total_weight, ret = 0; + int trip_max_desired_temperature = params->trip_max_desired_temperature; + + mutex_lock(&tz->lock); + + num_actors = 0; + total_weight = 0; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if ((instance->trip == trip_max_desired_temperature) && + cdev_is_power_actor(instance->cdev)) { + num_actors++; + total_weight += instance->weight; + } + } + + /* + * We need to allocate three arrays of the same size: + * req_power, max_power and granted_power. They are going to + * be needed until this function returns. Allocate them all + * in one go to simplify the allocation and deallocation + * logic. + */ + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*max_power)); + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*granted_power)); + BUILD_BUG_ON(sizeof(*req_power) != sizeof(*extra_actor_power)); + req_power = devm_kcalloc(&tz->device, num_actors * 4, + sizeof(*req_power), GFP_KERNEL); + if (!req_power) { + ret = -ENOMEM; + goto unlock; + } + + max_power = &req_power[num_actors]; + granted_power = &req_power[2 * num_actors]; + extra_actor_power = &req_power[3 * num_actors]; + + i = 0; + total_req_power = 0; + max_allocatable_power = 0; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + int weight; + struct thermal_cooling_device *cdev = instance->cdev; + + if (instance->trip != trip_max_desired_temperature) + continue; + + if (!cdev_is_power_actor(cdev)) + continue; + + if (cdev->ops->get_requested_power(cdev, tz, &req_power[i])) + continue; + + if (!total_weight) + weight = 1 << FRAC_BITS; + else + weight = instance->weight; + + req_power[i] = frac_to_int(weight * req_power[i]); + + if (power_actor_get_max_power(cdev, tz, &max_power[i])) + continue; + + total_req_power += req_power[i]; + max_allocatable_power += max_power[i]; + + i++; + } + + power_range = pid_controller(tz, current_temp, control_temp, + max_allocatable_power); + + divvy_up_power(req_power, max_power, num_actors, total_req_power, + power_range, granted_power, extra_actor_power); + + i = 0; + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip_max_desired_temperature) + continue; + + if (!cdev_is_power_actor(instance->cdev)) + continue; + + power_actor_set_power(instance->cdev, instance, + granted_power[i]); + + i++; + } + + devm_kfree(&tz->device, req_power); +unlock: + mutex_unlock(&tz->lock); + + return ret; +} + +static int get_governor_trips(struct thermal_zone_device *tz, + struct power_allocator_params *params) +{ + int i, ret, last_passive; + bool found_first_passive; + + found_first_passive = false; + last_passive = -1; + ret = -EINVAL; + + for (i = 0; i < tz->trips; i++) { + enum thermal_trip_type type; + + ret = tz->ops->get_trip_type(tz, i, &type); + if (ret) + return ret; + + if (!found_first_passive) { + if (type == THERMAL_TRIP_PASSIVE) { + params->trip_switch_on = i; + found_first_passive = true; + } + } else if (type == THERMAL_TRIP_PASSIVE) { + last_passive = i; + } else { + break; + } + } + + if (last_passive != -1) { + params->trip_max_desired_temperature = last_passive; + ret = 0; + } else { + ret = -EINVAL; + } + + return ret; +} + +static void reset_pid_controller(struct power_allocator_params *params) +{ + params->err_integral = 0; + params->prev_err = 0; +} + +static void allow_maximum_power(struct thermal_zone_device *tz) +{ + struct thermal_instance *instance; + struct power_allocator_params *params = tz->governor_data; + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if ((instance->trip != params->trip_max_desired_temperature) || + (!cdev_is_power_actor(instance->cdev))) + continue; + + instance->target = 0; + instance->cdev->updated = false; + thermal_cdev_update(instance->cdev); + } +} + +/** + * power_allocator_bind() - bind the power_allocator governor to a thermal zone + * @tz: thermal zone to bind it to + * + * Check that the thermal zone is valid for this governor, that is, it + * has two thermal trips. If so, initialize the PID controller + * parameters and bind it to the thermal zone. + * + * Return: 0 on success, -EINVAL if the trips were invalid or -ENOMEM + * if we ran out of memory. + */ +static int power_allocator_bind(struct thermal_zone_device *tz) +{ + int ret; + struct power_allocator_params *params; + unsigned long switch_on_temp, control_temp; + u32 temperature_threshold; + + if (!tz->tzp || !tz->tzp->sustainable_power) { + dev_err(&tz->device, + "power_allocator: missing sustainable_power\n"); + return -EINVAL; + } + + params = devm_kzalloc(&tz->device, sizeof(*params), GFP_KERNEL); + if (!params) + return -ENOMEM; + + ret = get_governor_trips(tz, params); + if (ret) { + dev_err(&tz->device, + "thermal zone %s has wrong trip setup for power allocator\n", + tz->type); + goto free; + } + + ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, + &switch_on_temp); + if (ret) + goto free; + + ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, + &control_temp); + if (ret) + goto free; + + temperature_threshold = control_temp - switch_on_temp; + + tz->tzp->k_po = tz->tzp->k_po ?: + int_to_frac(tz->tzp->sustainable_power) / temperature_threshold; + tz->tzp->k_pu = tz->tzp->k_pu ?: + int_to_frac(2 * tz->tzp->sustainable_power) / + temperature_threshold; + tz->tzp->k_i = tz->tzp->k_i ?: int_to_frac(10) / 1000; + /* + * The default for k_d and integral_cutoff is 0, so we can + * leave them as they are. + */ + + reset_pid_controller(params); + + tz->governor_data = params; + + return 0; + +free: + devm_kfree(&tz->device, params); + return ret; +} + +static void power_allocator_unbind(struct thermal_zone_device *tz) +{ + dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id); + devm_kfree(&tz->device, tz->governor_data); + tz->governor_data = NULL; +} + +static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) +{ + int ret; + unsigned long switch_on_temp, control_temp, current_temp; + struct power_allocator_params *params = tz->governor_data; + + /* + * We get called for every trip point but we only need to do + * our calculations once + */ + if (trip != params->trip_max_desired_temperature) + return 0; + + ret = thermal_zone_get_temp(tz, ¤t_temp); + if (ret) { + dev_warn(&tz->device, "Failed to get temperature: %d\n", ret); + return ret; + } + + ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, + &switch_on_temp); + if (ret) { + dev_warn(&tz->device, + "Failed to get switch on temperature: %d\n", ret); + return ret; + } + + if (current_temp < switch_on_temp) { + tz->passive = 0; + reset_pid_controller(params); + allow_maximum_power(tz); + return 0; + } + + tz->passive = 1; + + ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, + &control_temp); + if (ret) { + dev_warn(&tz->device, + "Failed to get the maximum desired temperature: %d\n", + ret); + return ret; + } + + return allocate_power(tz, current_temp, control_temp); +} + +static struct thermal_governor thermal_gov_power_allocator = { + .name = "power_allocator", + .bind_to_tz = power_allocator_bind, + .unbind_from_tz = power_allocator_unbind, + .throttle = power_allocator_throttle, +}; + +int thermal_gov_power_allocator_register(void) +{ + return thermal_register_governor(&thermal_gov_power_allocator); +} + +void thermal_gov_power_allocator_unregister(void) +{ + thermal_unregister_governor(&thermal_gov_power_allocator); +} diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 263628b0e862..b389bc2ec0fa 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1616,7 +1616,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, struct thermal_zone_device_ops *ops, - const struct thermal_zone_params *tzp, + struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { struct thermal_zone_device *tz; @@ -1968,7 +1968,11 @@ static int __init thermal_register_governors(void) if (result) return result; - return thermal_gov_user_space_register(); + result = thermal_gov_user_space_register(); + if (result) + return result; + + return thermal_gov_power_allocator_register(); } static void thermal_unregister_governors(void) @@ -1977,6 +1981,7 @@ static void thermal_unregister_governors(void) thermal_gov_fair_share_unregister(); thermal_gov_bang_bang_unregister(); thermal_gov_user_space_unregister(); + thermal_gov_power_allocator_unregister(); } static int __init thermal_init(void) diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index faebe881f062..8a6624488cc5 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -88,6 +88,14 @@ static inline int thermal_gov_user_space_register(void) { return 0; } static inline void thermal_gov_user_space_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_USER_SPACE */ +#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR +int thermal_gov_power_allocator_register(void); +void thermal_gov_power_allocator_unregister(void); +#else +static inline int thermal_gov_power_allocator_register(void) { return 0; } +static inline void thermal_gov_power_allocator_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_POWER_ALLOCATOR */ + /* device tree support */ #ifdef CONFIG_THERMAL_OF int of_parse_thermal_zones(void); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index bf3c55f405c2..6bbe11c97cea 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -59,6 +59,8 @@ #define DEFAULT_THERMAL_GOVERNOR "fair_share" #elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) #define DEFAULT_THERMAL_GOVERNOR "user_space" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR) +#define DEFAULT_THERMAL_GOVERNOR "power_allocator" #endif struct thermal_zone_device; @@ -154,8 +156,7 @@ struct thermal_attr { * @devdata: private pointer for device private data * @trips: number of trip points the thermal zone supports * @passive_delay: number of milliseconds to wait between polls when - * performing passive cooling. Currenty only used by the - * step-wise governor + * performing passive cooling. * @polling_delay: number of milliseconds to wait between polls when * checking whether trip points have been crossed (0 for * interrupt driven systems) @@ -165,7 +166,6 @@ struct thermal_attr { * @last_temperature: previous temperature read * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION * @passive: 1 if you've crossed a passive trip point, 0 otherwise. - * Currenty only used by the step-wise governor. * @forced_passive: If > 0, temperature at which to switch on all ACPI * processor cooling devices. Currently only used by the * step-wise governor. @@ -197,7 +197,7 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; struct thermal_zone_device_ops *ops; - const struct thermal_zone_params *tzp; + struct thermal_zone_params *tzp; struct thermal_governor *governor; void *governor_data; struct list_head thermal_instances; @@ -275,6 +275,33 @@ struct thermal_zone_params { int num_tbps; /* Number of tbp entries */ struct thermal_bind_params *tbp; + + /* + * Sustainable power (heat) that this thermal zone can dissipate in + * mW + */ + u32 sustainable_power; + + /* + * Proportional parameter of the PID controller when + * overshooting (i.e., when temperature is below the target) + */ + s32 k_po; + + /* + * Proportional parameter of the PID controller when + * undershooting + */ + s32 k_pu; + + /* Integral parameter of the PID controller */ + s32 k_i; + + /* Derivative parameter of the PID controller */ + s32 k_d; + + /* threshold below which the error is no longer accumulated */ + s32 integral_cutoff; }; struct thermal_genl_event { @@ -350,7 +377,7 @@ int power_actor_set_power(struct thermal_cooling_device *, struct thermal_instance *, u32); struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, void *, struct thermal_zone_device_ops *, - const struct thermal_zone_params *, int, int); + struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, -- cgit v1.2.3 From 6828a4711f994bbd9d3fd27b7a541217fc37b341 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 2 Mar 2015 17:17:20 +0000 Subject: thermal: add trace events to the power allocator governor Add trace events for the power allocator governor and the power actor interface of the cpu cooling device. Cc: Zhang Rui Cc: Eduardo Valentin Cc: Frederic Weisbecker Cc: Ingo Molnar Acked-by: Steven Rostedt Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 31 ++++++++- drivers/thermal/power_allocator.c | 22 ++++++- include/trace/events/thermal.h | 58 +++++++++++++++++ include/trace/events/thermal_power_allocator.h | 87 ++++++++++++++++++++++++++ 4 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 include/trace/events/thermal_power_allocator.h (limited to 'include') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index ba23150c7bde..c4974144c787 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -31,6 +31,8 @@ #include #include +#include + /* * Cooling state <-> CPUFreq frequency * @@ -588,12 +590,20 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, u32 *power) { unsigned long freq; - int cpu, ret; + int i = 0, cpu, ret; u32 static_power, dynamic_power, total_load = 0; struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + u32 *load_cpu = NULL; freq = cpufreq_quick_get(cpumask_any(&cpufreq_device->allowed_cpus)); + if (trace_thermal_power_cpu_get_power_enabled()) { + u32 ncpus = cpumask_weight(&cpufreq_device->allowed_cpus); + + load_cpu = devm_kcalloc(&cdev->device, ncpus, sizeof(*load_cpu), + GFP_KERNEL); + } + for_each_cpu(cpu, &cpufreq_device->allowed_cpus) { u32 load; @@ -603,14 +613,29 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, load = 0; total_load += load; + if (trace_thermal_power_cpu_limit_enabled() && load_cpu) + load_cpu[i] = load; + + i++; } cpufreq_device->last_load = total_load; dynamic_power = get_dynamic_power(cpufreq_device, freq); ret = get_static_power(cpufreq_device, tz, freq, &static_power); - if (ret) + if (ret) { + if (load_cpu) + devm_kfree(&cdev->device, load_cpu); return ret; + } + + if (load_cpu) { + trace_thermal_power_cpu_get_power( + &cpufreq_device->allowed_cpus, + freq, load_cpu, i, dynamic_power, static_power); + + devm_kfree(&cdev->device, load_cpu); + } *power = static_power + dynamic_power; return 0; @@ -718,6 +743,8 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, return -EINVAL; } + trace_thermal_power_cpu_limit(&cpufreq_device->allowed_cpus, + target_freq, *state, power); return 0; } diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c index 67982d79b76c..3ca7530deac6 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -19,6 +19,9 @@ #include #include +#define CREATE_TRACE_POINTS +#include + #include "thermal_core.h" #define FRAC_BITS 10 @@ -138,7 +141,14 @@ static u32 pid_controller(struct thermal_zone_device *tz, /* feed-forward the known sustainable dissipatable power */ power_range = tz->tzp->sustainable_power + frac_to_int(power_range); - return clamp(power_range, (s64)0, (s64)max_allocatable_power); + power_range = clamp(power_range, (s64)0, (s64)max_allocatable_power); + + trace_thermal_power_allocator_pid(tz, frac_to_int(err), + frac_to_int(params->err_integral), + frac_to_int(p), frac_to_int(i), + frac_to_int(d), power_range); + + return power_range; } /** @@ -219,7 +229,7 @@ static int allocate_power(struct thermal_zone_device *tz, struct power_allocator_params *params = tz->governor_data; u32 *req_power, *max_power, *granted_power, *extra_actor_power; u32 total_req_power, max_allocatable_power; - u32 power_range; + u32 total_granted_power, power_range; int i, num_actors, total_weight, ret = 0; int trip_max_desired_temperature = params->trip_max_desired_temperature; @@ -295,6 +305,7 @@ static int allocate_power(struct thermal_zone_device *tz, divvy_up_power(req_power, max_power, num_actors, total_req_power, power_range, granted_power, extra_actor_power); + total_granted_power = 0; i = 0; list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip_max_desired_temperature) @@ -305,10 +316,17 @@ static int allocate_power(struct thermal_zone_device *tz, power_actor_set_power(instance->cdev, instance, granted_power[i]); + total_granted_power += granted_power[i]; i++; } + trace_thermal_power_allocator(tz, req_power, total_req_power, + granted_power, total_granted_power, + num_actors, power_range, + max_allocatable_power, current_temp, + (s32)control_temp - (s32)current_temp); + devm_kfree(&tz->device, req_power); unlock: mutex_unlock(&tz->lock); diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h index 0f4f95d63c03..8b1f80682b80 100644 --- a/include/trace/events/thermal.h +++ b/include/trace/events/thermal.h @@ -77,6 +77,64 @@ TRACE_EVENT(thermal_zone_trip, __entry->trip_type) ); +TRACE_EVENT(thermal_power_cpu_get_power, + TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load, + size_t load_len, u32 dynamic_power, u32 static_power), + + TP_ARGS(cpus, freq, load, load_len, dynamic_power, static_power), + + TP_STRUCT__entry( + __bitmask(cpumask, num_possible_cpus()) + __field(unsigned long, freq ) + __dynamic_array(u32, load, load_len) + __field(size_t, load_len ) + __field(u32, dynamic_power ) + __field(u32, static_power ) + ), + + TP_fast_assign( + __assign_bitmask(cpumask, cpumask_bits(cpus), + num_possible_cpus()); + __entry->freq = freq; + memcpy(__get_dynamic_array(load), load, + load_len * sizeof(*load)); + __entry->load_len = load_len; + __entry->dynamic_power = dynamic_power; + __entry->static_power = static_power; + ), + + TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d static_power=%d", + __get_bitmask(cpumask), __entry->freq, + __print_array(__get_dynamic_array(load), __entry->load_len, 4), + __entry->dynamic_power, __entry->static_power) +); + +TRACE_EVENT(thermal_power_cpu_limit, + TP_PROTO(const struct cpumask *cpus, unsigned int freq, + unsigned long cdev_state, u32 power), + + TP_ARGS(cpus, freq, cdev_state, power), + + TP_STRUCT__entry( + __bitmask(cpumask, num_possible_cpus()) + __field(unsigned int, freq ) + __field(unsigned long, cdev_state) + __field(u32, power ) + ), + + TP_fast_assign( + __assign_bitmask(cpumask, cpumask_bits(cpus), + num_possible_cpus()); + __entry->freq = freq; + __entry->cdev_state = cdev_state; + __entry->power = power; + ), + + TP_printk("cpus=%s freq=%u cdev_state=%lu power=%u", + __get_bitmask(cpumask), __entry->freq, __entry->cdev_state, + __entry->power) +); + #endif /* _TRACE_THERMAL_H */ /* This part must be outside protection */ diff --git a/include/trace/events/thermal_power_allocator.h b/include/trace/events/thermal_power_allocator.h new file mode 100644 index 000000000000..12e1321c4e0c --- /dev/null +++ b/include/trace/events/thermal_power_allocator.h @@ -0,0 +1,87 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM thermal_power_allocator + +#if !defined(_TRACE_THERMAL_POWER_ALLOCATOR_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_THERMAL_POWER_ALLOCATOR_H + +#include + +TRACE_EVENT(thermal_power_allocator, + TP_PROTO(struct thermal_zone_device *tz, u32 *req_power, + u32 total_req_power, u32 *granted_power, + u32 total_granted_power, size_t num_actors, + u32 power_range, u32 max_allocatable_power, + unsigned long current_temp, s32 delta_temp), + TP_ARGS(tz, req_power, total_req_power, granted_power, + total_granted_power, num_actors, power_range, + max_allocatable_power, current_temp, delta_temp), + TP_STRUCT__entry( + __field(int, tz_id ) + __dynamic_array(u32, req_power, num_actors ) + __field(u32, total_req_power ) + __dynamic_array(u32, granted_power, num_actors) + __field(u32, total_granted_power ) + __field(size_t, num_actors ) + __field(u32, power_range ) + __field(u32, max_allocatable_power ) + __field(unsigned long, current_temp ) + __field(s32, delta_temp ) + ), + TP_fast_assign( + __entry->tz_id = tz->id; + memcpy(__get_dynamic_array(req_power), req_power, + num_actors * sizeof(*req_power)); + __entry->total_req_power = total_req_power; + memcpy(__get_dynamic_array(granted_power), granted_power, + num_actors * sizeof(*granted_power)); + __entry->total_granted_power = total_granted_power; + __entry->num_actors = num_actors; + __entry->power_range = power_range; + __entry->max_allocatable_power = max_allocatable_power; + __entry->current_temp = current_temp; + __entry->delta_temp = delta_temp; + ), + + TP_printk("thermal_zone_id=%d req_power={%s} total_req_power=%u granted_power={%s} total_granted_power=%u power_range=%u max_allocatable_power=%u current_temperature=%lu delta_temperature=%d", + __entry->tz_id, + __print_array(__get_dynamic_array(req_power), + __entry->num_actors, 4), + __entry->total_req_power, + __print_array(__get_dynamic_array(granted_power), + __entry->num_actors, 4), + __entry->total_granted_power, __entry->power_range, + __entry->max_allocatable_power, __entry->current_temp, + __entry->delta_temp) +); + +TRACE_EVENT(thermal_power_allocator_pid, + TP_PROTO(struct thermal_zone_device *tz, s32 err, s32 err_integral, + s64 p, s64 i, s64 d, s32 output), + TP_ARGS(tz, err, err_integral, p, i, d, output), + TP_STRUCT__entry( + __field(int, tz_id ) + __field(s32, err ) + __field(s32, err_integral) + __field(s64, p ) + __field(s64, i ) + __field(s64, d ) + __field(s32, output ) + ), + TP_fast_assign( + __entry->tz_id = tz->id; + __entry->err = err; + __entry->err_integral = err_integral; + __entry->p = p; + __entry->i = i; + __entry->d = d; + __entry->output = output; + ), + + TP_printk("thermal_zone_id=%d err=%d err_integral=%d p=%lld i=%lld d=%lld output=%d", + __entry->tz_id, __entry->err, __entry->err_integral, + __entry->p, __entry->i, __entry->d, __entry->output) +); +#endif /* _TRACE_THERMAL_POWER_ALLOCATOR_H */ + +/* This part must be outside protection */ +#include -- cgit v1.2.3 From acab18b5c3a7025640abc84ace5e94c76ebd3d10 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 4 May 2015 16:05:12 +0200 Subject: drm: drop unused 'magicfree' list This list is write-only. It's never used for read-access, so no reason to keep it around. Drop it! Signed-off-by: David Herrmann Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_auth.c | 3 --- drivers/gpu/drm/drm_drv.c | 1 - include/drm/drmP.h | 2 -- 3 files changed, 6 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_auth.c b/drivers/gpu/drm/drm_auth.c index fc8e8aaa34fb..8a37524d0867 100644 --- a/drivers/gpu/drm/drm_auth.c +++ b/drivers/gpu/drm/drm_auth.c @@ -37,7 +37,6 @@ #include "drm_internal.h" struct drm_magic_entry { - struct list_head head; struct drm_hash_item hash_item; struct drm_file *priv; }; @@ -93,7 +92,6 @@ static int drm_add_magic(struct drm_master *master, struct drm_file *priv, entry->hash_item.key = (unsigned long)magic; mutex_lock(&dev->struct_mutex); drm_ht_insert_item(&master->magiclist, &entry->hash_item); - list_add_tail(&entry->head, &master->magicfree); mutex_unlock(&dev->struct_mutex); return 0; @@ -123,7 +121,6 @@ int drm_remove_magic(struct drm_master *master, drm_magic_t magic) } pt = drm_hash_entry(hash, struct drm_magic_entry, hash_item); drm_ht_remove_item(&master->magiclist, hash); - list_del(&pt->head); mutex_unlock(&dev->struct_mutex); kfree(pt); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 48f7359e2a6b..26ed9feb3cfd 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -109,7 +109,6 @@ struct drm_master *drm_master_create(struct drm_minor *minor) kfree(master); return NULL; } - INIT_LIST_HEAD(&master->magicfree); master->minor = minor; return master; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 4c31a2cc5a33..e2b101b49112 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -356,7 +356,6 @@ struct drm_lock_data { * @unique: Unique identifier: e.g. busid. Protected by drm_global_mutex. * @unique_len: Length of unique field. Protected by drm_global_mutex. * @magiclist: Hash of used authentication tokens. Protected by struct_mutex. - * @magicfree: List of used authentication tokens. Protected by struct_mutex. * @lock: DRI lock information. * @driver_priv: Pointer to driver-private information. */ @@ -366,7 +365,6 @@ struct drm_master { char *unique; int unique_len; struct drm_open_hash magiclist; - struct list_head magicfree; struct drm_lock_data lock; void *driver_priv; }; -- cgit v1.2.3 From 32e7b94a3fa8e137aab9f2c65dff86be73245fc8 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 4 May 2015 21:01:30 +0200 Subject: drm: simplify authentication management The magic auth tokens we have are a simple map from cyclic IDs to drm_file objects. Remove all the old bulk of code and replace it with a simple, direct IDR. The previous behavior is kept. Especially calling authmagic multiple times on the same magic results in EINVAL except on the first call. The only difference in behavior is that we never allocate IDs multiple times as long as a client has its FD open. v2: - Fix return code of GetMagic() - Use non-cyclic IDR allocator - fix off-by-one in "magic > INT_MAX" sanity check v3: - drop redundant "magic > INT_MAX" check Signed-off-by: David Herrmann Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_auth.c | 175 +++++++++-------------------------------- drivers/gpu/drm/drm_drv.c | 12 +-- drivers/gpu/drm/drm_fops.c | 7 +- drivers/gpu/drm/drm_internal.h | 1 - include/drm/drmP.h | 4 +- 5 files changed, 42 insertions(+), 157 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_auth.c b/drivers/gpu/drm/drm_auth.c index 8a37524d0867..50d0baa06db0 100644 --- a/drivers/gpu/drm/drm_auth.c +++ b/drivers/gpu/drm/drm_auth.c @@ -1,11 +1,3 @@ -/** - * \file drm_auth.c - * IOCTLs for authentication - * - * \author Rickard E. (Rik) Faith - * \author Gareth Hughes - */ - /* * Created: Tue Feb 2 08:37:54 1999 by faith@valinux.com * @@ -13,6 +5,9 @@ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. * + * Author Rickard E. (Rik) Faith + * Author Gareth Hughes + * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation @@ -36,151 +31,47 @@ #include #include "drm_internal.h" -struct drm_magic_entry { - struct drm_hash_item hash_item; - struct drm_file *priv; -}; - -/** - * Find the file with the given magic number. - * - * \param dev DRM device. - * \param magic magic number. - * - * Searches in drm_device::magiclist within all files with the same hash key - * the one with matching magic number, while holding the drm_device::struct_mutex - * lock. - */ -static struct drm_file *drm_find_file(struct drm_master *master, drm_magic_t magic) -{ - struct drm_file *retval = NULL; - struct drm_magic_entry *pt; - struct drm_hash_item *hash; - struct drm_device *dev = master->minor->dev; - - mutex_lock(&dev->struct_mutex); - if (!drm_ht_find_item(&master->magiclist, (unsigned long)magic, &hash)) { - pt = drm_hash_entry(hash, struct drm_magic_entry, hash_item); - retval = pt->priv; - } - mutex_unlock(&dev->struct_mutex); - return retval; -} - -/** - * Adds a magic number. - * - * \param dev DRM device. - * \param priv file private data. - * \param magic magic number. - * - * Creates a drm_magic_entry structure and appends to the linked list - * associated the magic number hash key in drm_device::magiclist, while holding - * the drm_device::struct_mutex lock. - */ -static int drm_add_magic(struct drm_master *master, struct drm_file *priv, - drm_magic_t magic) -{ - struct drm_magic_entry *entry; - struct drm_device *dev = master->minor->dev; - DRM_DEBUG("%d\n", magic); - - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) - return -ENOMEM; - entry->priv = priv; - entry->hash_item.key = (unsigned long)magic; - mutex_lock(&dev->struct_mutex); - drm_ht_insert_item(&master->magiclist, &entry->hash_item); - mutex_unlock(&dev->struct_mutex); - - return 0; -} - -/** - * Remove a magic number. - * - * \param dev DRM device. - * \param magic magic number. - * - * Searches and unlinks the entry in drm_device::magiclist with the magic - * number hash key, while holding the drm_device::struct_mutex lock. - */ -int drm_remove_magic(struct drm_master *master, drm_magic_t magic) -{ - struct drm_magic_entry *pt; - struct drm_hash_item *hash; - struct drm_device *dev = master->minor->dev; - - DRM_DEBUG("%d\n", magic); - - mutex_lock(&dev->struct_mutex); - if (drm_ht_find_item(&master->magiclist, (unsigned long)magic, &hash)) { - mutex_unlock(&dev->struct_mutex); - return -EINVAL; - } - pt = drm_hash_entry(hash, struct drm_magic_entry, hash_item); - drm_ht_remove_item(&master->magiclist, hash); - mutex_unlock(&dev->struct_mutex); - - kfree(pt); - - return 0; -} - /** - * Get a unique magic number (ioctl). + * drm_getmagic - Get unique magic of a client + * @dev: DRM device to operate on + * @data: ioctl data containing the drm_auth object + * @file_priv: DRM file that performs the operation * - * \param inode device inode. - * \param file_priv DRM file private. - * \param cmd command. - * \param arg pointer to a resulting drm_auth structure. - * \return zero on success, or a negative number on failure. + * This looks up the unique magic of the passed client and returns it. If the + * client did not have a magic assigned, yet, a new one is registered. The magic + * is stored in the passed drm_auth object. * - * If there is a magic number in drm_file::magic then use it, otherwise - * searches an unique non-zero magic number and add it associating it with \p - * file_priv. - * This ioctl needs protection by the drm_global_mutex, which protects - * struct drm_file::magic and struct drm_magic_entry::priv. + * Returns: 0 on success, negative error code on failure. */ int drm_getmagic(struct drm_device *dev, void *data, struct drm_file *file_priv) { - static drm_magic_t sequence = 0; - static DEFINE_SPINLOCK(lock); struct drm_auth *auth = data; + int ret = 0; - /* Find unique magic */ - if (file_priv->magic) { - auth->magic = file_priv->magic; - } else { - do { - spin_lock(&lock); - if (!sequence) - ++sequence; /* reserve 0 */ - auth->magic = sequence++; - spin_unlock(&lock); - } while (drm_find_file(file_priv->master, auth->magic)); - file_priv->magic = auth->magic; - drm_add_magic(file_priv->master, file_priv, auth->magic); + mutex_lock(&dev->struct_mutex); + if (!file_priv->magic) { + ret = idr_alloc(&file_priv->master->magic_map, file_priv, + 1, 0, GFP_KERNEL); + if (ret >= 0) + file_priv->magic = ret; } + auth->magic = file_priv->magic; + mutex_unlock(&dev->struct_mutex); DRM_DEBUG("%u\n", auth->magic); - return 0; + return ret < 0 ? ret : 0; } /** - * Authenticate with a magic. + * drm_authmagic - Authenticate client with a magic + * @dev: DRM device to operate on + * @data: ioctl data containing the drm_auth object + * @file_priv: DRM file that performs the operation * - * \param inode device inode. - * \param file_priv DRM file private. - * \param cmd command. - * \param arg pointer to a drm_auth structure. - * \return zero if authentication successed, or a negative number otherwise. + * This looks up a DRM client by the passed magic and authenticates it. * - * Checks if \p file_priv is associated with the magic number passed in \arg. - * This ioctl needs protection by the drm_global_mutex, which protects - * struct drm_file::magic and struct drm_magic_entry::priv. + * Returns: 0 on success, negative error code on failure. */ int drm_authmagic(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -189,10 +80,14 @@ int drm_authmagic(struct drm_device *dev, void *data, struct drm_file *file; DRM_DEBUG("%u\n", auth->magic); - if ((file = drm_find_file(file_priv->master, auth->magic))) { + + mutex_lock(&dev->struct_mutex); + file = idr_find(&file_priv->master->magic_map, auth->magic); + if (file) { file->authenticated = 1; - drm_remove_magic(file_priv->master, auth->magic); - return 0; + idr_replace(&file_priv->master->magic_map, NULL, auth->magic); } - return -EINVAL; + mutex_unlock(&dev->struct_mutex); + + return file ? 0 : -EINVAL; } diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 26ed9feb3cfd..88b594c0593a 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -92,8 +92,6 @@ void drm_ut_debug_printk(const char *function_name, const char *format, ...) } EXPORT_SYMBOL(drm_ut_debug_printk); -#define DRM_MAGIC_HASH_ORDER 4 /**< Size of key hash table. Must be power of 2. */ - struct drm_master *drm_master_create(struct drm_minor *minor) { struct drm_master *master; @@ -105,10 +103,7 @@ struct drm_master *drm_master_create(struct drm_minor *minor) kref_init(&master->refcount); spin_lock_init(&master->lock.spinlock); init_waitqueue_head(&master->lock.lock_queue); - if (drm_ht_create(&master->magiclist, DRM_MAGIC_HASH_ORDER)) { - kfree(master); - return NULL; - } + idr_init(&master->magic_map); master->minor = minor; return master; @@ -143,10 +138,9 @@ static void drm_master_destroy(struct kref *kref) master->unique = NULL; master->unique_len = 0; } - - drm_ht_remove(&master->magiclist); - mutex_unlock(&dev->struct_mutex); + + idr_destroy(&master->magic_map); kfree(master); } diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 076dd606b580..0f6a5c8801e3 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -380,6 +380,8 @@ int drm_release(struct inode *inode, struct file *filp) mutex_lock(&dev->struct_mutex); list_del(&file_priv->lhead); + if (file_priv->magic) + idr_remove(&file_priv->master->magic_map, file_priv->magic); mutex_unlock(&dev->struct_mutex); if (dev->driver->preclose) @@ -394,11 +396,6 @@ int drm_release(struct inode *inode, struct file *filp) (long)old_encode_dev(file_priv->minor->kdev->devt), dev->open_count); - /* Release any auth tokens that might point to this file_priv, - (do that under the drm_global_mutex) */ - if (file_priv->magic) - (void) drm_remove_magic(file_priv->master, file_priv->magic); - /* if the master has gone away we can't do anything with the lock */ if (file_priv->minor->master) drm_master_release(dev, filp); diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index 12a61d706827..059af01bd07a 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -69,7 +69,6 @@ int drm_getmagic(struct drm_device *dev, void *data, struct drm_file *file_priv); int drm_authmagic(struct drm_device *dev, void *data, struct drm_file *file_priv); -int drm_remove_magic(struct drm_master *master, drm_magic_t magic); /* drm_sysfs.c */ extern struct class *drm_class; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index e2b101b49112..df6d9970d9a4 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -355,7 +355,7 @@ struct drm_lock_data { * @minor: Link back to minor char device we are master for. Immutable. * @unique: Unique identifier: e.g. busid. Protected by drm_global_mutex. * @unique_len: Length of unique field. Protected by drm_global_mutex. - * @magiclist: Hash of used authentication tokens. Protected by struct_mutex. + * @magic_map: Map of used authentication tokens. Protected by struct_mutex. * @lock: DRI lock information. * @driver_priv: Pointer to driver-private information. */ @@ -364,7 +364,7 @@ struct drm_master { struct drm_minor *minor; char *unique; int unique_len; - struct drm_open_hash magiclist; + struct idr magic_map; struct drm_lock_data lock; void *driver_priv; }; -- cgit v1.2.3 From 3d9dd6fdd23695a038633f1a87aee0708fe4b8e0 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Thu, 12 Mar 2015 15:48:02 +0100 Subject: memory: tegra: Add API needed by the EMC driver The EMC driver needs to know the number of external memory devices and also needs to update the EMEM configuration based on the new rate of the memory bus. To know how to update the EMEM config, looks up the values of the burst regs in the DT, for a given timing. Signed-off-by: Mikko Perttunen Signed-off-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/memory/tegra/mc.c | 136 ++++++++++++++++++++++++++++++++++++++++ drivers/memory/tegra/tegra124.c | 44 +++++++++++++ include/soc/tegra/mc.h | 14 ++++- 3 files changed, 193 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index fe3c44e7e1d1..4e3a886816a4 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -13,6 +13,9 @@ #include #include #include +#include + +#include #include "mc.h" @@ -48,6 +51,9 @@ #define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff #define MC_EMEM_ARB_MISC0 0xd8 +#define MC_EMEM_ADR_CFG 0x54 +#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0) + static const struct of_device_id tegra_mc_of_match[] = { #ifdef CONFIG_ARCH_TEGRA_3x_SOC { .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc }, @@ -91,6 +97,130 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc) return 0; } +void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate) +{ + unsigned int i; + struct tegra_mc_timing *timing = NULL; + + for (i = 0; i < mc->num_timings; i++) { + if (mc->timings[i].rate == rate) { + timing = &mc->timings[i]; + break; + } + } + + if (!timing) { + dev_err(mc->dev, "no memory timing registered for rate %lu\n", + rate); + return; + } + + for (i = 0; i < mc->soc->num_emem_regs; ++i) + mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]); +} + +unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc) +{ + u8 dram_count; + + dram_count = mc_readl(mc, MC_EMEM_ADR_CFG); + dram_count &= MC_EMEM_ADR_CFG_EMEM_NUMDEV; + dram_count++; + + return dram_count; +} + +static int load_one_timing(struct tegra_mc *mc, + struct tegra_mc_timing *timing, + struct device_node *node) +{ + int err; + u32 tmp; + + err = of_property_read_u32(node, "clock-frequency", &tmp); + if (err) { + dev_err(mc->dev, + "timing %s: failed to read rate\n", node->name); + return err; + } + + timing->rate = tmp; + timing->emem_data = devm_kcalloc(mc->dev, mc->soc->num_emem_regs, + sizeof(u32), GFP_KERNEL); + if (!timing->emem_data) + return -ENOMEM; + + err = of_property_read_u32_array(node, "nvidia,emem-configuration", + timing->emem_data, + mc->soc->num_emem_regs); + if (err) { + dev_err(mc->dev, + "timing %s: failed to read EMEM configuration\n", + node->name); + return err; + } + + return 0; +} + +static int load_timings(struct tegra_mc *mc, struct device_node *node) +{ + struct device_node *child; + struct tegra_mc_timing *timing; + int child_count = of_get_child_count(node); + int i = 0, err; + + mc->timings = devm_kcalloc(mc->dev, child_count, sizeof(*timing), + GFP_KERNEL); + if (!mc->timings) + return -ENOMEM; + + mc->num_timings = child_count; + + for_each_child_of_node(node, child) { + timing = &mc->timings[i++]; + + err = load_one_timing(mc, timing, child); + if (err) + return err; + } + + return 0; +} + +static int tegra_mc_setup_timings(struct tegra_mc *mc) +{ + struct device_node *node; + u32 ram_code, node_ram_code; + int err; + + ram_code = tegra_read_ram_code(); + + mc->num_timings = 0; + + for_each_child_of_node(mc->dev->of_node, node) { + err = of_property_read_u32(node, "nvidia,ram-code", + &node_ram_code); + if (err || (node_ram_code != ram_code)) { + of_node_put(node); + continue; + } + + err = load_timings(mc, node); + if (err) + return err; + of_node_put(node); + break; + } + + if (mc->num_timings == 0) + dev_warn(mc->dev, + "no memory timings for RAM code %u registered\n", + ram_code); + + return 0; +} + static const char *const status_names[32] = { [ 1] = "External interrupt", [ 6] = "EMEM address decode error", @@ -248,6 +378,12 @@ static int tegra_mc_probe(struct platform_device *pdev) return err; } + err = tegra_mc_setup_timings(mc); + if (err < 0) { + dev_err(&pdev->dev, "failed to setup timings: %d\n", err); + return err; + } + if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) { mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc); if (IS_ERR(mc->smmu)) { diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index 278d40b854c1..3e9a99a556e1 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -15,6 +15,48 @@ #include "mc.h" +#define MC_EMEM_ARB_CFG 0x90 +#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94 +#define MC_EMEM_ARB_TIMING_RCD 0x98 +#define MC_EMEM_ARB_TIMING_RP 0x9c +#define MC_EMEM_ARB_TIMING_RC 0xa0 +#define MC_EMEM_ARB_TIMING_RAS 0xa4 +#define MC_EMEM_ARB_TIMING_FAW 0xa8 +#define MC_EMEM_ARB_TIMING_RRD 0xac +#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0 +#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4 +#define MC_EMEM_ARB_TIMING_R2R 0xb8 +#define MC_EMEM_ARB_TIMING_W2W 0xbc +#define MC_EMEM_ARB_TIMING_R2W 0xc0 +#define MC_EMEM_ARB_TIMING_W2R 0xc4 +#define MC_EMEM_ARB_DA_TURNS 0xd0 +#define MC_EMEM_ARB_DA_COVERS 0xd4 +#define MC_EMEM_ARB_MISC0 0xd8 +#define MC_EMEM_ARB_MISC1 0xdc +#define MC_EMEM_ARB_RING1_THROTTLE 0xe0 + +static const unsigned long tegra124_mc_emem_regs[] = { + MC_EMEM_ARB_CFG, + MC_EMEM_ARB_OUTSTANDING_REQ, + MC_EMEM_ARB_TIMING_RCD, + MC_EMEM_ARB_TIMING_RP, + MC_EMEM_ARB_TIMING_RC, + MC_EMEM_ARB_TIMING_RAS, + MC_EMEM_ARB_TIMING_FAW, + MC_EMEM_ARB_TIMING_RRD, + MC_EMEM_ARB_TIMING_RAP2PRE, + MC_EMEM_ARB_TIMING_WAP2PRE, + MC_EMEM_ARB_TIMING_R2R, + MC_EMEM_ARB_TIMING_W2W, + MC_EMEM_ARB_TIMING_R2W, + MC_EMEM_ARB_TIMING_W2R, + MC_EMEM_ARB_DA_TURNS, + MC_EMEM_ARB_DA_COVERS, + MC_EMEM_ARB_MISC0, + MC_EMEM_ARB_MISC1, + MC_EMEM_ARB_RING1_THROTTLE +}; + static const struct tegra_mc_client tegra124_mc_clients[] = { { .id = 0x00, @@ -991,5 +1033,7 @@ const struct tegra_mc_soc tegra124_mc_soc = { .num_address_bits = 34, .atom_size = 32, .smmu = &tegra124_smmu_soc, + .emem_regs = tegra124_mc_emem_regs, + .num_emem_regs = ARRAY_SIZE(tegra124_mc_emem_regs), }; #endif /* CONFIG_ARCH_TEGRA_124_SOC */ diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index 63deb8d9f82a..90b558e2f3cd 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -20,6 +20,12 @@ struct tegra_smmu_enable { unsigned int bit; }; +struct tegra_mc_timing { + unsigned long rate; + + u32 *emem_data; +}; + /* latency allowance */ struct tegra_mc_la { unsigned int reg; @@ -84,7 +90,7 @@ struct tegra_mc_soc { const struct tegra_mc_client *clients; unsigned int num_clients; - const unsigned int *emem_regs; + const unsigned long *emem_regs; unsigned int num_emem_regs; unsigned int num_address_bits; @@ -102,6 +108,12 @@ struct tegra_mc { const struct tegra_mc_soc *soc; unsigned long tick; + + struct tegra_mc_timing *timings; + unsigned int num_timings; }; +void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate); +unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc); + #endif /* __SOC_TEGRA_MC_H__ */ -- cgit v1.2.3 From 73a7f0a90641b09300d47308682b674c570dd6a2 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Thu, 12 Mar 2015 15:48:03 +0100 Subject: memory: tegra: Add EMC (external memory controller) driver Implements functionality needed to change the rate of the memory bus clock. Signed-off-by: Mikko Perttunen Signed-off-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/memory/tegra/Kconfig | 10 + drivers/memory/tegra/Makefile | 2 + drivers/memory/tegra/tegra124-emc.c | 1092 +++++++++++++++++++++++++++++++++++ include/soc/tegra/emc.h | 19 + 4 files changed, 1123 insertions(+) create mode 100644 drivers/memory/tegra/tegra124-emc.c create mode 100644 include/soc/tegra/emc.h (limited to 'include') diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig index 571087621827..6d74e499e18d 100644 --- a/drivers/memory/tegra/Kconfig +++ b/drivers/memory/tegra/Kconfig @@ -5,3 +5,13 @@ config TEGRA_MC help This driver supports the Memory Controller (MC) hardware found on NVIDIA Tegra SoCs. + +config TEGRA124_EMC + bool "NVIDIA Tegra124 External Memory Controller driver" + default y + depends on TEGRA_MC && ARCH_TEGRA_124_SOC + help + This driver is for the External Memory Controller (EMC) found on + Tegra124 chips. The EMC controls the external DRAM on the board. + This driver is required to change memory timings / clock rate for + external memory. diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile index 0d9f497b786c..c0129602ffd4 100644 --- a/drivers/memory/tegra/Makefile +++ b/drivers/memory/tegra/Makefile @@ -5,3 +5,5 @@ tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o obj-$(CONFIG_TEGRA_MC) += tegra-mc.o + +obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c new file mode 100644 index 000000000000..900504c01a64 --- /dev/null +++ b/drivers/memory/tegra/tegra124-emc.c @@ -0,0 +1,1092 @@ +/* + * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + * + * Author: + * Mikko Perttunen + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define EMC_FBIO_CFG5 0x104 +#define EMC_FBIO_CFG5_DRAM_TYPE_MASK 0x3 +#define EMC_FBIO_CFG5_DRAM_TYPE_SHIFT 0 + +#define EMC_INTSTATUS 0x0 +#define EMC_INTSTATUS_CLKCHANGE_COMPLETE BIT(4) + +#define EMC_CFG 0xc +#define EMC_CFG_DRAM_CLKSTOP_PD BIT(31) +#define EMC_CFG_DRAM_CLKSTOP_SR BIT(30) +#define EMC_CFG_DRAM_ACPD BIT(29) +#define EMC_CFG_DYN_SREF BIT(28) +#define EMC_CFG_PWR_MASK ((0xF << 28) | BIT(18)) +#define EMC_CFG_DSR_VTTGEN_DRV_EN BIT(18) + +#define EMC_REFCTRL 0x20 +#define EMC_REFCTRL_DEV_SEL_SHIFT 0 +#define EMC_REFCTRL_ENABLE BIT(31) + +#define EMC_TIMING_CONTROL 0x28 +#define EMC_RC 0x2c +#define EMC_RFC 0x30 +#define EMC_RAS 0x34 +#define EMC_RP 0x38 +#define EMC_R2W 0x3c +#define EMC_W2R 0x40 +#define EMC_R2P 0x44 +#define EMC_W2P 0x48 +#define EMC_RD_RCD 0x4c +#define EMC_WR_RCD 0x50 +#define EMC_RRD 0x54 +#define EMC_REXT 0x58 +#define EMC_WDV 0x5c +#define EMC_QUSE 0x60 +#define EMC_QRST 0x64 +#define EMC_QSAFE 0x68 +#define EMC_RDV 0x6c +#define EMC_REFRESH 0x70 +#define EMC_BURST_REFRESH_NUM 0x74 +#define EMC_PDEX2WR 0x78 +#define EMC_PDEX2RD 0x7c +#define EMC_PCHG2PDEN 0x80 +#define EMC_ACT2PDEN 0x84 +#define EMC_AR2PDEN 0x88 +#define EMC_RW2PDEN 0x8c +#define EMC_TXSR 0x90 +#define EMC_TCKE 0x94 +#define EMC_TFAW 0x98 +#define EMC_TRPAB 0x9c +#define EMC_TCLKSTABLE 0xa0 +#define EMC_TCLKSTOP 0xa4 +#define EMC_TREFBW 0xa8 +#define EMC_ODT_WRITE 0xb0 +#define EMC_ODT_READ 0xb4 +#define EMC_WEXT 0xb8 +#define EMC_CTT 0xbc +#define EMC_RFC_SLR 0xc0 +#define EMC_MRS_WAIT_CNT2 0xc4 + +#define EMC_MRS_WAIT_CNT 0xc8 +#define EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT 0 +#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK \ + (0x3FF << EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT) +#define EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT 16 +#define EMC_MRS_WAIT_CNT_LONG_WAIT_MASK \ + (0x3FF << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT) + +#define EMC_MRS 0xcc +#define EMC_MODE_SET_DLL_RESET BIT(8) +#define EMC_MODE_SET_LONG_CNT BIT(26) +#define EMC_EMRS 0xd0 +#define EMC_REF 0xd4 +#define EMC_PRE 0xd8 + +#define EMC_SELF_REF 0xe0 +#define EMC_SELF_REF_CMD_ENABLED BIT(0) +#define EMC_SELF_REF_DEV_SEL_SHIFT 30 + +#define EMC_MRW 0xe8 + +#define EMC_MRR 0xec +#define EMC_MRR_MA_SHIFT 16 +#define LPDDR2_MR4_TEMP_SHIFT 0 + +#define EMC_XM2DQSPADCTRL3 0xf8 +#define EMC_FBIO_SPARE 0x100 + +#define EMC_FBIO_CFG6 0x114 +#define EMC_EMRS2 0x12c +#define EMC_MRW2 0x134 +#define EMC_MRW4 0x13c +#define EMC_EINPUT 0x14c +#define EMC_EINPUT_DURATION 0x150 +#define EMC_PUTERM_EXTRA 0x154 +#define EMC_TCKESR 0x158 +#define EMC_TPD 0x15c + +#define EMC_AUTO_CAL_CONFIG 0x2a4 +#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_START BIT(31) +#define EMC_AUTO_CAL_INTERVAL 0x2a8 +#define EMC_AUTO_CAL_STATUS 0x2ac +#define EMC_AUTO_CAL_STATUS_ACTIVE BIT(31) +#define EMC_STATUS 0x2b4 +#define EMC_STATUS_TIMING_UPDATE_STALLED BIT(23) + +#define EMC_CFG_2 0x2b8 +#define EMC_CFG_2_MODE_SHIFT 0 +#define EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR BIT(6) + +#define EMC_CFG_DIG_DLL 0x2bc +#define EMC_CFG_DIG_DLL_PERIOD 0x2c0 +#define EMC_RDV_MASK 0x2cc +#define EMC_WDV_MASK 0x2d0 +#define EMC_CTT_DURATION 0x2d8 +#define EMC_CTT_TERM_CTRL 0x2dc +#define EMC_ZCAL_INTERVAL 0x2e0 +#define EMC_ZCAL_WAIT_CNT 0x2e4 + +#define EMC_ZQ_CAL 0x2ec +#define EMC_ZQ_CAL_CMD BIT(0) +#define EMC_ZQ_CAL_LONG BIT(4) +#define EMC_ZQ_CAL_LONG_CMD_DEV0 \ + (DRAM_DEV_SEL_0 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD) +#define EMC_ZQ_CAL_LONG_CMD_DEV1 \ + (DRAM_DEV_SEL_1 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD) + +#define EMC_XM2CMDPADCTRL 0x2f0 +#define EMC_XM2DQSPADCTRL 0x2f8 +#define EMC_XM2DQSPADCTRL2 0x2fc +#define EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE BIT(0) +#define EMC_XM2DQSPADCTRL2_VREF_ENABLE BIT(5) +#define EMC_XM2DQPADCTRL 0x300 +#define EMC_XM2DQPADCTRL2 0x304 +#define EMC_XM2CLKPADCTRL 0x308 +#define EMC_XM2COMPPADCTRL 0x30c +#define EMC_XM2VTTGENPADCTRL 0x310 +#define EMC_XM2VTTGENPADCTRL2 0x314 +#define EMC_XM2VTTGENPADCTRL3 0x318 +#define EMC_XM2DQSPADCTRL4 0x320 +#define EMC_DLL_XFORM_DQS0 0x328 +#define EMC_DLL_XFORM_DQS1 0x32c +#define EMC_DLL_XFORM_DQS2 0x330 +#define EMC_DLL_XFORM_DQS3 0x334 +#define EMC_DLL_XFORM_DQS4 0x338 +#define EMC_DLL_XFORM_DQS5 0x33c +#define EMC_DLL_XFORM_DQS6 0x340 +#define EMC_DLL_XFORM_DQS7 0x344 +#define EMC_DLL_XFORM_QUSE0 0x348 +#define EMC_DLL_XFORM_QUSE1 0x34c +#define EMC_DLL_XFORM_QUSE2 0x350 +#define EMC_DLL_XFORM_QUSE3 0x354 +#define EMC_DLL_XFORM_QUSE4 0x358 +#define EMC_DLL_XFORM_QUSE5 0x35c +#define EMC_DLL_XFORM_QUSE6 0x360 +#define EMC_DLL_XFORM_QUSE7 0x364 +#define EMC_DLL_XFORM_DQ0 0x368 +#define EMC_DLL_XFORM_DQ1 0x36c +#define EMC_DLL_XFORM_DQ2 0x370 +#define EMC_DLL_XFORM_DQ3 0x374 +#define EMC_DLI_TRIM_TXDQS0 0x3a8 +#define EMC_DLI_TRIM_TXDQS1 0x3ac +#define EMC_DLI_TRIM_TXDQS2 0x3b0 +#define EMC_DLI_TRIM_TXDQS3 0x3b4 +#define EMC_DLI_TRIM_TXDQS4 0x3b8 +#define EMC_DLI_TRIM_TXDQS5 0x3bc +#define EMC_DLI_TRIM_TXDQS6 0x3c0 +#define EMC_DLI_TRIM_TXDQS7 0x3c4 +#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE 0x3cc +#define EMC_SEL_DPD_CTRL 0x3d8 +#define EMC_SEL_DPD_CTRL_DATA_SEL_DPD BIT(8) +#define EMC_SEL_DPD_CTRL_ODT_SEL_DPD BIT(5) +#define EMC_SEL_DPD_CTRL_RESET_SEL_DPD BIT(4) +#define EMC_SEL_DPD_CTRL_CA_SEL_DPD BIT(3) +#define EMC_SEL_DPD_CTRL_CLK_SEL_DPD BIT(2) +#define EMC_SEL_DPD_CTRL_DDR3_MASK \ + ((0xf << 2) | BIT(8)) +#define EMC_SEL_DPD_CTRL_MASK \ + ((0x3 << 2) | BIT(5) | BIT(8)) +#define EMC_PRE_REFRESH_REQ_CNT 0x3dc +#define EMC_DYN_SELF_REF_CONTROL 0x3e0 +#define EMC_TXSRDLL 0x3e4 +#define EMC_CCFIFO_ADDR 0x3e8 +#define EMC_CCFIFO_DATA 0x3ec +#define EMC_CCFIFO_STATUS 0x3f0 +#define EMC_CDB_CNTL_1 0x3f4 +#define EMC_CDB_CNTL_2 0x3f8 +#define EMC_XM2CLKPADCTRL2 0x3fc +#define EMC_AUTO_CAL_CONFIG2 0x458 +#define EMC_AUTO_CAL_CONFIG3 0x45c +#define EMC_IBDLY 0x468 +#define EMC_DLL_XFORM_ADDR0 0x46c +#define EMC_DLL_XFORM_ADDR1 0x470 +#define EMC_DLL_XFORM_ADDR2 0x474 +#define EMC_DSR_VTTGEN_DRV 0x47c +#define EMC_TXDSRVTTGEN 0x480 +#define EMC_XM2CMDPADCTRL4 0x484 +#define EMC_XM2CMDPADCTRL5 0x488 +#define EMC_DLL_XFORM_DQS8 0x4a0 +#define EMC_DLL_XFORM_DQS9 0x4a4 +#define EMC_DLL_XFORM_DQS10 0x4a8 +#define EMC_DLL_XFORM_DQS11 0x4ac +#define EMC_DLL_XFORM_DQS12 0x4b0 +#define EMC_DLL_XFORM_DQS13 0x4b4 +#define EMC_DLL_XFORM_DQS14 0x4b8 +#define EMC_DLL_XFORM_DQS15 0x4bc +#define EMC_DLL_XFORM_QUSE8 0x4c0 +#define EMC_DLL_XFORM_QUSE9 0x4c4 +#define EMC_DLL_XFORM_QUSE10 0x4c8 +#define EMC_DLL_XFORM_QUSE11 0x4cc +#define EMC_DLL_XFORM_QUSE12 0x4d0 +#define EMC_DLL_XFORM_QUSE13 0x4d4 +#define EMC_DLL_XFORM_QUSE14 0x4d8 +#define EMC_DLL_XFORM_QUSE15 0x4dc +#define EMC_DLL_XFORM_DQ4 0x4e0 +#define EMC_DLL_XFORM_DQ5 0x4e4 +#define EMC_DLL_XFORM_DQ6 0x4e8 +#define EMC_DLL_XFORM_DQ7 0x4ec +#define EMC_DLI_TRIM_TXDQS8 0x520 +#define EMC_DLI_TRIM_TXDQS9 0x524 +#define EMC_DLI_TRIM_TXDQS10 0x528 +#define EMC_DLI_TRIM_TXDQS11 0x52c +#define EMC_DLI_TRIM_TXDQS12 0x530 +#define EMC_DLI_TRIM_TXDQS13 0x534 +#define EMC_DLI_TRIM_TXDQS14 0x538 +#define EMC_DLI_TRIM_TXDQS15 0x53c +#define EMC_CDB_CNTL_3 0x540 +#define EMC_XM2DQSPADCTRL5 0x544 +#define EMC_XM2DQSPADCTRL6 0x548 +#define EMC_XM2DQPADCTRL3 0x54c +#define EMC_DLL_XFORM_ADDR3 0x550 +#define EMC_DLL_XFORM_ADDR4 0x554 +#define EMC_DLL_XFORM_ADDR5 0x558 +#define EMC_CFG_PIPE 0x560 +#define EMC_QPOP 0x564 +#define EMC_QUSE_WIDTH 0x568 +#define EMC_PUTERM_WIDTH 0x56c +#define EMC_BGBIAS_CTL0 0x570 +#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX BIT(3) +#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN BIT(2) +#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD BIT(1) +#define EMC_PUTERM_ADJ 0x574 + +#define DRAM_DEV_SEL_ALL 0 +#define DRAM_DEV_SEL_0 (2 << 30) +#define DRAM_DEV_SEL_1 (1 << 30) + +#define EMC_CFG_POWER_FEATURES_MASK \ + (EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \ + EMC_CFG_DRAM_CLKSTOP_PD | EMC_CFG_DSR_VTTGEN_DRV_EN) +#define EMC_REFCTRL_DEV_SEL(n) (((n > 1) ? 0 : 2) << EMC_REFCTRL_DEV_SEL_SHIFT) +#define EMC_DRAM_DEV_SEL(n) ((n > 1) ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0) + +/* Maximum amount of time in us. to wait for changes to become effective */ +#define EMC_STATUS_UPDATE_TIMEOUT 1000 + +enum emc_dram_type { + DRAM_TYPE_DDR3 = 0, + DRAM_TYPE_DDR1 = 1, + DRAM_TYPE_LPDDR3 = 2, + DRAM_TYPE_DDR2 = 3 +}; + +enum emc_dll_change { + DLL_CHANGE_NONE, + DLL_CHANGE_ON, + DLL_CHANGE_OFF +}; + +static const unsigned long emc_burst_regs[] = { + EMC_RC, + EMC_RFC, + EMC_RFC_SLR, + EMC_RAS, + EMC_RP, + EMC_R2W, + EMC_W2R, + EMC_R2P, + EMC_W2P, + EMC_RD_RCD, + EMC_WR_RCD, + EMC_RRD, + EMC_REXT, + EMC_WEXT, + EMC_WDV, + EMC_WDV_MASK, + EMC_QUSE, + EMC_QUSE_WIDTH, + EMC_IBDLY, + EMC_EINPUT, + EMC_EINPUT_DURATION, + EMC_PUTERM_EXTRA, + EMC_PUTERM_WIDTH, + EMC_PUTERM_ADJ, + EMC_CDB_CNTL_1, + EMC_CDB_CNTL_2, + EMC_CDB_CNTL_3, + EMC_QRST, + EMC_QSAFE, + EMC_RDV, + EMC_RDV_MASK, + EMC_REFRESH, + EMC_BURST_REFRESH_NUM, + EMC_PRE_REFRESH_REQ_CNT, + EMC_PDEX2WR, + EMC_PDEX2RD, + EMC_PCHG2PDEN, + EMC_ACT2PDEN, + EMC_AR2PDEN, + EMC_RW2PDEN, + EMC_TXSR, + EMC_TXSRDLL, + EMC_TCKE, + EMC_TCKESR, + EMC_TPD, + EMC_TFAW, + EMC_TRPAB, + EMC_TCLKSTABLE, + EMC_TCLKSTOP, + EMC_TREFBW, + EMC_FBIO_CFG6, + EMC_ODT_WRITE, + EMC_ODT_READ, + EMC_FBIO_CFG5, + EMC_CFG_DIG_DLL, + EMC_CFG_DIG_DLL_PERIOD, + EMC_DLL_XFORM_DQS0, + EMC_DLL_XFORM_DQS1, + EMC_DLL_XFORM_DQS2, + EMC_DLL_XFORM_DQS3, + EMC_DLL_XFORM_DQS4, + EMC_DLL_XFORM_DQS5, + EMC_DLL_XFORM_DQS6, + EMC_DLL_XFORM_DQS7, + EMC_DLL_XFORM_DQS8, + EMC_DLL_XFORM_DQS9, + EMC_DLL_XFORM_DQS10, + EMC_DLL_XFORM_DQS11, + EMC_DLL_XFORM_DQS12, + EMC_DLL_XFORM_DQS13, + EMC_DLL_XFORM_DQS14, + EMC_DLL_XFORM_DQS15, + EMC_DLL_XFORM_QUSE0, + EMC_DLL_XFORM_QUSE1, + EMC_DLL_XFORM_QUSE2, + EMC_DLL_XFORM_QUSE3, + EMC_DLL_XFORM_QUSE4, + EMC_DLL_XFORM_QUSE5, + EMC_DLL_XFORM_QUSE6, + EMC_DLL_XFORM_QUSE7, + EMC_DLL_XFORM_ADDR0, + EMC_DLL_XFORM_ADDR1, + EMC_DLL_XFORM_ADDR2, + EMC_DLL_XFORM_ADDR3, + EMC_DLL_XFORM_ADDR4, + EMC_DLL_XFORM_ADDR5, + EMC_DLL_XFORM_QUSE8, + EMC_DLL_XFORM_QUSE9, + EMC_DLL_XFORM_QUSE10, + EMC_DLL_XFORM_QUSE11, + EMC_DLL_XFORM_QUSE12, + EMC_DLL_XFORM_QUSE13, + EMC_DLL_XFORM_QUSE14, + EMC_DLL_XFORM_QUSE15, + EMC_DLI_TRIM_TXDQS0, + EMC_DLI_TRIM_TXDQS1, + EMC_DLI_TRIM_TXDQS2, + EMC_DLI_TRIM_TXDQS3, + EMC_DLI_TRIM_TXDQS4, + EMC_DLI_TRIM_TXDQS5, + EMC_DLI_TRIM_TXDQS6, + EMC_DLI_TRIM_TXDQS7, + EMC_DLI_TRIM_TXDQS8, + EMC_DLI_TRIM_TXDQS9, + EMC_DLI_TRIM_TXDQS10, + EMC_DLI_TRIM_TXDQS11, + EMC_DLI_TRIM_TXDQS12, + EMC_DLI_TRIM_TXDQS13, + EMC_DLI_TRIM_TXDQS14, + EMC_DLI_TRIM_TXDQS15, + EMC_DLL_XFORM_DQ0, + EMC_DLL_XFORM_DQ1, + EMC_DLL_XFORM_DQ2, + EMC_DLL_XFORM_DQ3, + EMC_DLL_XFORM_DQ4, + EMC_DLL_XFORM_DQ5, + EMC_DLL_XFORM_DQ6, + EMC_DLL_XFORM_DQ7, + EMC_XM2CMDPADCTRL, + EMC_XM2CMDPADCTRL4, + EMC_XM2CMDPADCTRL5, + EMC_XM2DQPADCTRL2, + EMC_XM2DQPADCTRL3, + EMC_XM2CLKPADCTRL, + EMC_XM2CLKPADCTRL2, + EMC_XM2COMPPADCTRL, + EMC_XM2VTTGENPADCTRL, + EMC_XM2VTTGENPADCTRL2, + EMC_XM2VTTGENPADCTRL3, + EMC_XM2DQSPADCTRL3, + EMC_XM2DQSPADCTRL4, + EMC_XM2DQSPADCTRL5, + EMC_XM2DQSPADCTRL6, + EMC_DSR_VTTGEN_DRV, + EMC_TXDSRVTTGEN, + EMC_FBIO_SPARE, + EMC_ZCAL_WAIT_CNT, + EMC_MRS_WAIT_CNT2, + EMC_CTT, + EMC_CTT_DURATION, + EMC_CFG_PIPE, + EMC_DYN_SELF_REF_CONTROL, + EMC_QPOP +}; + +struct emc_timing { + unsigned long rate; + + u32 emc_burst_data[ARRAY_SIZE(emc_burst_regs)]; + + u32 emc_auto_cal_config; + u32 emc_auto_cal_config2; + u32 emc_auto_cal_config3; + u32 emc_auto_cal_interval; + u32 emc_bgbias_ctl0; + u32 emc_cfg; + u32 emc_cfg_2; + u32 emc_ctt_term_ctrl; + u32 emc_mode_1; + u32 emc_mode_2; + u32 emc_mode_4; + u32 emc_mode_reset; + u32 emc_mrs_wait_cnt; + u32 emc_sel_dpd_ctrl; + u32 emc_xm2dqspadctrl2; + u32 emc_zcal_cnt_long; + u32 emc_zcal_interval; +}; + +struct tegra_emc { + struct device *dev; + + struct tegra_mc *mc; + + void __iomem *regs; + + enum emc_dram_type dram_type; + unsigned int dram_num; + + struct emc_timing last_timing; + struct emc_timing *timings; + unsigned int num_timings; +}; + +/* Timing change sequence functions */ + +static void emc_ccfifo_writel(struct tegra_emc *emc, u32 value, + unsigned long offset) +{ + writel(value, emc->regs + EMC_CCFIFO_DATA); + writel(offset, emc->regs + EMC_CCFIFO_ADDR); +} + +static void emc_seq_update_timing(struct tegra_emc *emc) +{ + unsigned int i; + u32 value; + + writel(1, emc->regs + EMC_TIMING_CONTROL); + + for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) { + value = readl(emc->regs + EMC_STATUS); + if ((value & EMC_STATUS_TIMING_UPDATE_STALLED) == 0) + return; + udelay(1); + } + + dev_err(emc->dev, "timing update timed out\n"); +} + +static void emc_seq_disable_auto_cal(struct tegra_emc *emc) +{ + unsigned int i; + u32 value; + + writel(0, emc->regs + EMC_AUTO_CAL_INTERVAL); + + for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) { + value = readl(emc->regs + EMC_AUTO_CAL_STATUS); + if ((value & EMC_AUTO_CAL_STATUS_ACTIVE) == 0) + return; + udelay(1); + } + + dev_err(emc->dev, "auto cal disable timed out\n"); +} + +static void emc_seq_wait_clkchange(struct tegra_emc *emc) +{ + unsigned int i; + u32 value; + + for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) { + value = readl(emc->regs + EMC_INTSTATUS); + if (value & EMC_INTSTATUS_CLKCHANGE_COMPLETE) + return; + udelay(1); + } + + dev_err(emc->dev, "clock change timed out\n"); +} + +static struct emc_timing *tegra_emc_find_timing(struct tegra_emc *emc, + unsigned long rate) +{ + struct emc_timing *timing = NULL; + unsigned int i; + + for (i = 0; i < emc->num_timings; i++) { + if (emc->timings[i].rate == rate) { + timing = &emc->timings[i]; + break; + } + } + + if (!timing) { + dev_err(emc->dev, "no timing for rate %lu\n", rate); + return NULL; + } + + return timing; +} + +int tegra_emc_prepare_timing_change(struct tegra_emc *emc, + unsigned long rate) +{ + struct emc_timing *timing = tegra_emc_find_timing(emc, rate); + struct emc_timing *last = &emc->last_timing; + enum emc_dll_change dll_change; + unsigned int pre_wait = 0; + u32 val, val2, mask; + bool update = false; + unsigned int i; + + if (!timing) + return -ENOENT; + + if ((last->emc_mode_1 & 0x1) == (timing->emc_mode_1 & 0x1)) + dll_change = DLL_CHANGE_NONE; + else if (timing->emc_mode_1 & 0x1) + dll_change = DLL_CHANGE_ON; + else + dll_change = DLL_CHANGE_OFF; + + /* Clear CLKCHANGE_COMPLETE interrupts */ + writel(EMC_INTSTATUS_CLKCHANGE_COMPLETE, emc->regs + EMC_INTSTATUS); + + /* Disable dynamic self-refresh */ + val = readl(emc->regs + EMC_CFG); + if (val & EMC_CFG_PWR_MASK) { + val &= ~EMC_CFG_POWER_FEATURES_MASK; + writel(val, emc->regs + EMC_CFG); + + pre_wait = 5; + } + + /* Disable SEL_DPD_CTRL for clock change */ + if (emc->dram_type == DRAM_TYPE_DDR3) + mask = EMC_SEL_DPD_CTRL_DDR3_MASK; + else + mask = EMC_SEL_DPD_CTRL_MASK; + + val = readl(emc->regs + EMC_SEL_DPD_CTRL); + if (val & mask) { + val &= ~mask; + writel(val, emc->regs + EMC_SEL_DPD_CTRL); + } + + /* Prepare DQ/DQS for clock change */ + val = readl(emc->regs + EMC_BGBIAS_CTL0); + val2 = last->emc_bgbias_ctl0; + if (!(timing->emc_bgbias_ctl0 & + EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) && + (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX)) { + val2 &= ~EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX; + update = true; + } + + if ((val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD) || + (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN)) { + update = true; + } + + if (update) { + writel(val2, emc->regs + EMC_BGBIAS_CTL0); + if (pre_wait < 5) + pre_wait = 5; + } + + update = false; + val = readl(emc->regs + EMC_XM2DQSPADCTRL2); + if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_VREF_ENABLE && + !(val & EMC_XM2DQSPADCTRL2_VREF_ENABLE)) { + val |= EMC_XM2DQSPADCTRL2_VREF_ENABLE; + update = true; + } + + if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE && + !(val & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE)) { + val |= EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE; + update = true; + } + + if (update) { + writel(val, emc->regs + EMC_XM2DQSPADCTRL2); + if (pre_wait < 30) + pre_wait = 30; + } + + /* Wait to settle */ + if (pre_wait) { + emc_seq_update_timing(emc); + udelay(pre_wait); + } + + /* Program CTT_TERM control */ + if (last->emc_ctt_term_ctrl != timing->emc_ctt_term_ctrl) { + emc_seq_disable_auto_cal(emc); + writel(timing->emc_ctt_term_ctrl, + emc->regs + EMC_CTT_TERM_CTRL); + emc_seq_update_timing(emc); + } + + /* Program burst shadow registers */ + for (i = 0; i < ARRAY_SIZE(timing->emc_burst_data); ++i) + writel(timing->emc_burst_data[i], + emc->regs + emc_burst_regs[i]); + + writel(timing->emc_xm2dqspadctrl2, emc->regs + EMC_XM2DQSPADCTRL2); + writel(timing->emc_zcal_interval, emc->regs + EMC_ZCAL_INTERVAL); + + tegra_mc_write_emem_configuration(emc->mc, timing->rate); + + val = timing->emc_cfg & ~EMC_CFG_POWER_FEATURES_MASK; + emc_ccfifo_writel(emc, val, EMC_CFG); + + /* Program AUTO_CAL_CONFIG */ + if (timing->emc_auto_cal_config2 != last->emc_auto_cal_config2) + emc_ccfifo_writel(emc, timing->emc_auto_cal_config2, + EMC_AUTO_CAL_CONFIG2); + + if (timing->emc_auto_cal_config3 != last->emc_auto_cal_config3) + emc_ccfifo_writel(emc, timing->emc_auto_cal_config3, + EMC_AUTO_CAL_CONFIG3); + + if (timing->emc_auto_cal_config != last->emc_auto_cal_config) { + val = timing->emc_auto_cal_config; + val &= EMC_AUTO_CAL_CONFIG_AUTO_CAL_START; + emc_ccfifo_writel(emc, val, EMC_AUTO_CAL_CONFIG); + } + + /* DDR3: predict MRS long wait count */ + if (emc->dram_type == DRAM_TYPE_DDR3 && + dll_change == DLL_CHANGE_ON) { + u32 cnt = 512; + + if (timing->emc_zcal_interval != 0 && + last->emc_zcal_interval == 0) + cnt -= emc->dram_num * 256; + + val = (timing->emc_mrs_wait_cnt + & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK) + >> EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT; + if (cnt < val) + cnt = val; + + val = timing->emc_mrs_wait_cnt + & ~EMC_MRS_WAIT_CNT_LONG_WAIT_MASK; + val |= (cnt << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT) + & EMC_MRS_WAIT_CNT_LONG_WAIT_MASK; + + writel(val, emc->regs + EMC_MRS_WAIT_CNT); + } + + val = timing->emc_cfg_2; + val &= ~EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR; + emc_ccfifo_writel(emc, val, EMC_CFG_2); + + /* DDR3: Turn off DLL and enter self-refresh */ + if (emc->dram_type == DRAM_TYPE_DDR3 && dll_change == DLL_CHANGE_OFF) + emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS); + + /* Disable refresh controller */ + emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num), + EMC_REFCTRL); + if (emc->dram_type == DRAM_TYPE_DDR3) + emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num) | + EMC_SELF_REF_CMD_ENABLED, + EMC_SELF_REF); + + /* Flow control marker */ + emc_ccfifo_writel(emc, 1, EMC_STALL_THEN_EXE_AFTER_CLKCHANGE); + + /* DDR3: Exit self-refresh */ + if (emc->dram_type == DRAM_TYPE_DDR3) + emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num), + EMC_SELF_REF); + emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num) | + EMC_REFCTRL_ENABLE, + EMC_REFCTRL); + + /* Set DRAM mode registers */ + if (emc->dram_type == DRAM_TYPE_DDR3) { + if (timing->emc_mode_1 != last->emc_mode_1) + emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS); + if (timing->emc_mode_2 != last->emc_mode_2) + emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_EMRS2); + + if ((timing->emc_mode_reset != last->emc_mode_reset) || + dll_change == DLL_CHANGE_ON) { + val = timing->emc_mode_reset; + if (dll_change == DLL_CHANGE_ON) { + val |= EMC_MODE_SET_DLL_RESET; + val |= EMC_MODE_SET_LONG_CNT; + } else { + val &= ~EMC_MODE_SET_DLL_RESET; + } + emc_ccfifo_writel(emc, val, EMC_MRS); + } + } else { + if (timing->emc_mode_2 != last->emc_mode_2) + emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_MRW2); + if (timing->emc_mode_1 != last->emc_mode_1) + emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_MRW); + if (timing->emc_mode_4 != last->emc_mode_4) + emc_ccfifo_writel(emc, timing->emc_mode_4, EMC_MRW4); + } + + /* Issue ZCAL command if turning ZCAL on */ + if (timing->emc_zcal_interval != 0 && last->emc_zcal_interval == 0) { + emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV0, EMC_ZQ_CAL); + if (emc->dram_num > 1) + emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV1, + EMC_ZQ_CAL); + } + + /* Write to RO register to remove stall after change */ + emc_ccfifo_writel(emc, 0, EMC_CCFIFO_STATUS); + + if (timing->emc_cfg_2 & EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR) + emc_ccfifo_writel(emc, timing->emc_cfg_2, EMC_CFG_2); + + /* Disable AUTO_CAL for clock change */ + emc_seq_disable_auto_cal(emc); + + /* Read register to wait until programming has settled */ + readl(emc->regs + EMC_INTSTATUS); + + return 0; +} + +void tegra_emc_complete_timing_change(struct tegra_emc *emc, + unsigned long rate) +{ + struct emc_timing *timing = tegra_emc_find_timing(emc, rate); + struct emc_timing *last = &emc->last_timing; + u32 val; + + if (!timing) + return; + + /* Wait until the state machine has settled */ + emc_seq_wait_clkchange(emc); + + /* Restore AUTO_CAL */ + if (timing->emc_ctt_term_ctrl != last->emc_ctt_term_ctrl) + writel(timing->emc_auto_cal_interval, + emc->regs + EMC_AUTO_CAL_INTERVAL); + + /* Restore dynamic self-refresh */ + if (timing->emc_cfg & EMC_CFG_PWR_MASK) + writel(timing->emc_cfg, emc->regs + EMC_CFG); + + /* Set ZCAL wait count */ + writel(timing->emc_zcal_cnt_long, emc->regs + EMC_ZCAL_WAIT_CNT); + + /* LPDDR3: Turn off BGBIAS if low frequency */ + if (emc->dram_type == DRAM_TYPE_LPDDR3 && + timing->emc_bgbias_ctl0 & + EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) { + val = timing->emc_bgbias_ctl0; + val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN; + val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD; + writel(val, emc->regs + EMC_BGBIAS_CTL0); + } else { + if (emc->dram_type == DRAM_TYPE_DDR3 && + readl(emc->regs + EMC_BGBIAS_CTL0) != + timing->emc_bgbias_ctl0) { + writel(timing->emc_bgbias_ctl0, + emc->regs + EMC_BGBIAS_CTL0); + } + + writel(timing->emc_auto_cal_interval, + emc->regs + EMC_AUTO_CAL_INTERVAL); + } + + /* Wait for timing to settle */ + udelay(2); + + /* Reprogram SEL_DPD_CTRL */ + writel(timing->emc_sel_dpd_ctrl, emc->regs + EMC_SEL_DPD_CTRL); + emc_seq_update_timing(emc); + + emc->last_timing = *timing; +} + +/* Initialization and deinitialization */ + +static void emc_read_current_timing(struct tegra_emc *emc, + struct emc_timing *timing) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(emc_burst_regs); ++i) + timing->emc_burst_data[i] = + readl(emc->regs + emc_burst_regs[i]); + + timing->emc_cfg = readl(emc->regs + EMC_CFG); + + timing->emc_auto_cal_interval = 0; + timing->emc_zcal_cnt_long = 0; + timing->emc_mode_1 = 0; + timing->emc_mode_2 = 0; + timing->emc_mode_4 = 0; + timing->emc_mode_reset = 0; +} + +static int emc_init(struct tegra_emc *emc) +{ + emc->dram_type = readl(emc->regs + EMC_FBIO_CFG5); + emc->dram_type &= EMC_FBIO_CFG5_DRAM_TYPE_MASK; + emc->dram_type >>= EMC_FBIO_CFG5_DRAM_TYPE_SHIFT; + + emc->dram_num = tegra_mc_get_emem_device_count(emc->mc); + + emc_read_current_timing(emc, &emc->last_timing); + + return 0; +} + +static int load_one_timing_from_dt(struct tegra_emc *emc, + struct emc_timing *timing, + struct device_node *node) +{ + u32 value; + int err; + + err = of_property_read_u32(node, "clock-frequency", &value); + if (err) { + dev_err(emc->dev, "timing %s: failed to read rate: %d\n", + node->name, err); + return err; + } + + timing->rate = value; + + err = of_property_read_u32_array(node, "nvidia,emc-configuration", + timing->emc_burst_data, + ARRAY_SIZE(timing->emc_burst_data)); + if (err) { + dev_err(emc->dev, + "timing %s: failed to read emc burst data: %d\n", + node->name, err); + return err; + } + +#define EMC_READ_PROP(prop, dtprop) { \ + err = of_property_read_u32(node, dtprop, &timing->prop); \ + if (err) { \ + dev_err(emc->dev, "timing %s: failed to read " #prop ": %d\n", \ + node->name, err); \ + return err; \ + } \ +} + + EMC_READ_PROP(emc_auto_cal_config, "nvidia,emc-auto-cal-config") + EMC_READ_PROP(emc_auto_cal_config2, "nvidia,emc-auto-cal-config2") + EMC_READ_PROP(emc_auto_cal_config3, "nvidia,emc-auto-cal-config3") + EMC_READ_PROP(emc_auto_cal_interval, "nvidia,emc-auto-cal-interval") + EMC_READ_PROP(emc_bgbias_ctl0, "nvidia,emc-bgbias-ctl0") + EMC_READ_PROP(emc_cfg, "nvidia,emc-cfg") + EMC_READ_PROP(emc_cfg_2, "nvidia,emc-cfg-2") + EMC_READ_PROP(emc_ctt_term_ctrl, "nvidia,emc-ctt-term-ctrl") + EMC_READ_PROP(emc_mode_1, "nvidia,emc-mode-1") + EMC_READ_PROP(emc_mode_2, "nvidia,emc-mode-2") + EMC_READ_PROP(emc_mode_4, "nvidia,emc-mode-4") + EMC_READ_PROP(emc_mode_reset, "nvidia,emc-mode-reset") + EMC_READ_PROP(emc_mrs_wait_cnt, "nvidia,emc-mrs-wait-cnt") + EMC_READ_PROP(emc_sel_dpd_ctrl, "nvidia,emc-sel-dpd-ctrl") + EMC_READ_PROP(emc_xm2dqspadctrl2, "nvidia,emc-xm2dqspadctrl2") + EMC_READ_PROP(emc_zcal_cnt_long, "nvidia,emc-zcal-cnt-long") + EMC_READ_PROP(emc_zcal_interval, "nvidia,emc-zcal-interval") + +#undef EMC_READ_PROP + + return 0; +} + +static int cmp_timings(const void *_a, const void *_b) +{ + const struct emc_timing *a = _a; + const struct emc_timing *b = _b; + + if (a->rate < b->rate) + return -1; + else if (a->rate == b->rate) + return 0; + else + return 1; +} + +static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc, + struct device_node *node) +{ + int child_count = of_get_child_count(node); + struct device_node *child; + struct emc_timing *timing; + unsigned int i = 0; + int err; + + emc->timings = devm_kcalloc(emc->dev, child_count, sizeof(*timing), + GFP_KERNEL); + if (!emc->timings) + return -ENOMEM; + + emc->num_timings = child_count; + + for_each_child_of_node(node, child) { + timing = &emc->timings[i++]; + + err = load_one_timing_from_dt(emc, timing, child); + if (err) + return err; + } + + sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings, + NULL); + + return 0; +} + +static const struct of_device_id tegra_emc_of_match[] = { + { .compatible = "nvidia,tegra124-emc" }, + {} +}; + +static struct device_node * +tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code) +{ + struct device_node *np; + int err; + + for_each_child_of_node(node, np) { + u32 value; + + err = of_property_read_u32(np, "nvidia,ram-code", &value); + if (err || (value != ram_code)) { + of_node_put(np); + continue; + } + + return np; + } + + return NULL; +} + +static int tegra_emc_probe(struct platform_device *pdev) +{ + struct platform_device *mc; + struct device_node *np; + struct tegra_emc *emc; + struct resource *res; + u32 ram_code; + int err; + + emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL); + if (!emc) + return -ENOMEM; + + emc->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + emc->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(emc->regs)) + return PTR_ERR(emc->regs); + + np = of_parse_phandle(pdev->dev.of_node, "nvidia,memory-controller", 0); + if (!np) { + dev_err(&pdev->dev, "could not get memory controller\n"); + return -ENOENT; + } + + mc = of_find_device_by_node(np); + if (!mc) + return -ENOENT; + + of_node_put(np); + + emc->mc = platform_get_drvdata(mc); + if (!emc->mc) + return -EPROBE_DEFER; + + ram_code = tegra_read_ram_code(); + + np = tegra_emc_find_node_by_ram_code(pdev->dev.of_node, ram_code); + if (!np) { + dev_err(&pdev->dev, + "no memory timings for RAM code %u found in DT\n", + ram_code); + return -ENOENT; + } + + err = tegra_emc_load_timings_from_dt(emc, np); + + of_node_put(np); + + if (err) + return err; + + if (emc->num_timings == 0) { + dev_err(&pdev->dev, + "no memory timings for RAM code %u registered\n", + ram_code); + return -ENOENT; + } + + err = emc_init(emc); + if (err) { + dev_err(&pdev->dev, "EMC initialization failed: %d\n", err); + return err; + } + + platform_set_drvdata(pdev, emc); + + return 0; +}; + +static struct platform_driver tegra_emc_driver = { + .probe = tegra_emc_probe, + .driver = { + .name = "tegra-emc", + .of_match_table = tegra_emc_of_match, + .suppress_bind_attrs = true, + }, +}; + +static int tegra_emc_init(void) +{ + return platform_driver_register(&tegra_emc_driver); +} +subsys_initcall(tegra_emc_init); diff --git a/include/soc/tegra/emc.h b/include/soc/tegra/emc.h new file mode 100644 index 000000000000..f6db33b579ec --- /dev/null +++ b/include/soc/tegra/emc.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2014 NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SOC_TEGRA_EMC_H__ +#define __SOC_TEGRA_EMC_H__ + +struct tegra_emc; + +int tegra_emc_prepare_timing_change(struct tegra_emc *emc, + unsigned long rate); +void tegra_emc_complete_timing_change(struct tegra_emc *emc, + unsigned long rate); + +#endif /* __SOC_TEGRA_EMC_H__ */ -- cgit v1.2.3 From 632f3ab95fe2ffebf09969a57ab21be409ed7dcc Mon Sep 17 00:00:00 2001 From: "Lu, Han" Date: Tue, 5 May 2015 09:05:47 +0800 Subject: drm/i915/audio: add codec wakeup override enabled/disable callback Add support for enabling codec wakeup override signal to allow re-enumeration of the controller on SKL after resume from low power state. In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells, so it's necessary to reset display audio codecs when power well on, otherwise display audio codecs will disappear when resume from low power state. Reset steps when power on: enable codec wakeup -> azx_init_chip() -> disable codec wakeup v3 by Jani: Simplify to only support toggling the appropriate chicken bit. v4 by Han: add explanation and specify the hw swquence. Signed-off-by: Lu, Han Signed-off-by: Jani Nikula Acked-by: Daniel Vetter Signed-off-by: Takashi Iwai --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_audio.c | 27 +++++++++++++++++++++++++++ include/drm/i915_component.h | 1 + 3 files changed, 31 insertions(+) (limited to 'include') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3da1af46625c..7d88f4f51594 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6477,6 +6477,9 @@ enum skl_disp_power_wells { #define AUDIO_CP_READY(trans) ((1 << 1) << ((trans) * 4)) #define AUDIO_ELD_VALID(trans) ((1 << 0) << ((trans) * 4)) +#define HSW_AUD_CHICKENBIT 0x65f10 +#define SKL_AUD_CODEC_WAKE_SIGNAL (1 << 15) + /* HSW Power Wells */ #define HSW_PWR_WELL_BIOS 0x45400 /* CTL1 */ #define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */ diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 2396cc702d18..ef342571ae6a 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -475,6 +475,32 @@ static void i915_audio_component_put_power(struct device *dev) intel_display_power_put(dev_to_i915(dev), POWER_DOMAIN_AUDIO); } +static void i915_audio_component_codec_wake_override(struct device *dev, + bool enable) +{ + struct drm_i915_private *dev_priv = dev_to_i915(dev); + u32 tmp; + + if (!IS_SKYLAKE(dev_priv)) + return; + + /* + * Enable/disable generating the codec wake signal, overriding the + * internal logic to generate the codec wake to controller. + */ + tmp = I915_READ(HSW_AUD_CHICKENBIT); + tmp &= ~SKL_AUD_CODEC_WAKE_SIGNAL; + I915_WRITE(HSW_AUD_CHICKENBIT, tmp); + usleep_range(1000, 1500); + + if (enable) { + tmp = I915_READ(HSW_AUD_CHICKENBIT); + tmp |= SKL_AUD_CODEC_WAKE_SIGNAL; + I915_WRITE(HSW_AUD_CHICKENBIT, tmp); + usleep_range(1000, 1500); + } +} + /* Get CDCLK in kHz */ static int i915_audio_component_get_cdclk_freq(struct device *dev) { @@ -495,6 +521,7 @@ static const struct i915_audio_component_ops i915_audio_component_ops = { .owner = THIS_MODULE, .get_power = i915_audio_component_get_power, .put_power = i915_audio_component_put_power, + .codec_wake_override = i915_audio_component_codec_wake_override, .get_cdclk_freq = i915_audio_component_get_cdclk_freq, }; diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h index 3e2f22e5bf3c..c9a8b64aa33b 100644 --- a/include/drm/i915_component.h +++ b/include/drm/i915_component.h @@ -31,6 +31,7 @@ struct i915_audio_component { struct module *owner; void (*get_power)(struct device *); void (*put_power)(struct device *); + void (*codec_wake_override)(struct device *, bool enable); int (*get_cdclk_freq)(struct device *); } *ops; }; -- cgit v1.2.3 From 406c057c4e00744453d5b0731eb23629ec14dcdf Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 4 May 2015 21:54:20 -0400 Subject: libata: READ LOG DMA EXT support can be in either page 119 or 120 Support for the READ/WRITE LOG DMA EXT commands can be signaled either in page 119 or page 120. We should check both pages. Signed-off-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Signed-off-by: Tejun Heo --- include/linux/ata.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index b666b773e111..fed36418dd1c 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -704,9 +704,19 @@ static inline bool ata_id_wcache_enabled(const u16 *id) static inline bool ata_id_has_read_log_dma_ext(const u16 *id) { + /* Word 86 must have bit 15 set */ if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) return false; - return id[ATA_ID_COMMAND_SET_3] & (1 << 3); + + /* READ LOG DMA EXT support can be signaled either from word 119 + * or from word 120. The format is the same for both words: Bit + * 15 must be cleared, bit 14 set and bit 3 set. + */ + if ((id[ATA_ID_COMMAND_SET_3] & 0xC008) == 0x4008 || + (id[ATA_ID_COMMAND_SET_4] & 0xC008) == 0x4008) + return true; + + return false; } static inline bool ata_id_has_sense_reporting(const u16 *id) -- cgit v1.2.3 From 5d3abf8ff67f49271a42c0f7fa4f20f9e046bf0e Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 4 May 2015 21:54:21 -0400 Subject: libata: Fall back to unqueued READ LOG EXT if the DMA variant fails Some devices advertise support for the READ/WRITE LOG DMA EXT commands but fail when we try to issue them. This can lead to queued TRIM being unintentionally disabled since the relevant feature flag is located in a general purpose log page. Fall back to unqueued READ LOG EXT if the DMA variant fails while reading a log page. Signed-off-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Signed-off-by: Tejun Heo --- drivers/ata/libata-eh.c | 12 +++++++++++- include/linux/libata.h | 1 + 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 07f41be38fbe..2893563d0537 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1507,13 +1507,17 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log, { struct ata_taskfile tf; unsigned int err_mask; + bool dma = false; DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page); +retry: ata_tf_init(dev, &tf); - if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id)) { + if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) && + !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) { tf.command = ATA_CMD_READ_LOG_DMA_EXT; tf.protocol = ATA_PROT_DMA; + dma = true; } else { tf.command = ATA_CMD_READ_LOG_EXT; tf.protocol = ATA_PROT_PIO; @@ -1527,6 +1531,12 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log, err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, buf, sectors * ATA_SECT_SIZE, 0); + if (err_mask && dma) { + dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG; + ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n"); + goto retry; + } + DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 8dad4a307bb8..c3ef58014b33 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -424,6 +424,7 @@ enum { ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */ ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */ ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */ + ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From c4cf5261f8bffd9de132b50660a69148e7575bd6 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 17 Apr 2015 16:15:18 -0600 Subject: bio: skip atomic inc/dec of ->bi_remaining for non-chains Struct bio has an atomic ref count for chained bio's, and we use this to know when to end IO on the bio. However, most bio's are not chained, so we don't need to always introduce this atomic operation as part of ending IO. Add a helper to elevate the bi_remaining count, and flag the bio as now actually needing the decrement at end_io time. Rename the field to __bi_remaining to catch any current users of this doing the incrementing manually. For high IOPS workloads, this reduces the overhead of bio_endio() substantially. Tested-by: Robert Elliott Acked-by: Kent Overstreet Reviewed-by: Jan Kara Signed-off-by: Jens Axboe --- block/bio.c | 38 +++++++++++++++++++++++++++++--------- drivers/md/dm-cache-target.c | 2 +- drivers/md/dm-raid1.c | 2 +- drivers/md/dm-snap.c | 2 +- drivers/md/dm-thin.c | 4 ++-- include/linux/bio.h | 11 +++++++++++ include/linux/blk_types.h | 3 ++- 7 files changed, 47 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/block/bio.c b/block/bio.c index f66a4eae16ee..117da319afb6 100644 --- a/block/bio.c +++ b/block/bio.c @@ -270,7 +270,7 @@ void bio_init(struct bio *bio) { memset(bio, 0, sizeof(*bio)); bio->bi_flags = 1 << BIO_UPTODATE; - atomic_set(&bio->bi_remaining, 1); + atomic_set(&bio->__bi_remaining, 1); atomic_set(&bio->bi_cnt, 1); } EXPORT_SYMBOL(bio_init); @@ -292,8 +292,8 @@ void bio_reset(struct bio *bio) __bio_free(bio); memset(bio, 0, BIO_RESET_BYTES); - bio->bi_flags = flags|(1 << BIO_UPTODATE); - atomic_set(&bio->bi_remaining, 1); + bio->bi_flags = flags | (1 << BIO_UPTODATE); + atomic_set(&bio->__bi_remaining, 1); } EXPORT_SYMBOL(bio_reset); @@ -320,7 +320,7 @@ void bio_chain(struct bio *bio, struct bio *parent) bio->bi_private = parent; bio->bi_end_io = bio_chain_endio; - atomic_inc(&parent->bi_remaining); + bio_inc_remaining(parent); } EXPORT_SYMBOL(bio_chain); @@ -1741,6 +1741,23 @@ void bio_flush_dcache_pages(struct bio *bi) EXPORT_SYMBOL(bio_flush_dcache_pages); #endif +static inline bool bio_remaining_done(struct bio *bio) +{ + /* + * If we're not chaining, then ->__bi_remaining is always 1 and + * we always end io on the first invocation. + */ + if (!bio_flagged(bio, BIO_CHAIN)) + return true; + + BUG_ON(atomic_read(&bio->__bi_remaining) <= 0); + + if (atomic_dec_and_test(&bio->__bi_remaining)) + return true; + + return false; +} + /** * bio_endio - end I/O on a bio * @bio: bio @@ -1758,15 +1775,13 @@ EXPORT_SYMBOL(bio_flush_dcache_pages); void bio_endio(struct bio *bio, int error) { while (bio) { - BUG_ON(atomic_read(&bio->bi_remaining) <= 0); - if (error) clear_bit(BIO_UPTODATE, &bio->bi_flags); else if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) error = -EIO; - if (!atomic_dec_and_test(&bio->bi_remaining)) - return; + if (unlikely(!bio_remaining_done(bio))) + break; /* * Need to have a real endio function for chained bios, @@ -1799,7 +1814,12 @@ EXPORT_SYMBOL(bio_endio); **/ void bio_endio_nodec(struct bio *bio, int error) { - atomic_inc(&bio->bi_remaining); + /* + * If it's not flagged as a chain, we are not going to dec the count + */ + if (bio_flagged(bio, BIO_CHAIN)) + bio_inc_remaining(bio); + bio_endio(bio, error); } EXPORT_SYMBOL(bio_endio_nodec); diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c index 7755af351867..705eb7b99d69 100644 --- a/drivers/md/dm-cache-target.c +++ b/drivers/md/dm-cache-target.c @@ -91,7 +91,7 @@ static void dm_unhook_bio(struct dm_hook_info *h, struct bio *bio) * Must bump bi_remaining to allow bio to complete with * restored bi_end_io. */ - atomic_inc(&bio->bi_remaining); + bio_inc_remaining(bio); } /*----------------------------------------------------------------*/ diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 089d62751f7f..d6a1c096b777 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1254,7 +1254,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, int error) dm_bio_restore(bd, bio); bio_record->details.bi_bdev = NULL; - atomic_inc(&bio->bi_remaining); + bio_inc_remaining(bio); queue_bio(ms, bio, rw); return DM_ENDIO_INCOMPLETE; diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index f83a0f3fc365..8bfeae218531 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1478,7 +1478,7 @@ out: if (full_bio) { full_bio->bi_end_io = pe->full_bio_end_io; full_bio->bi_private = pe->full_bio_private; - atomic_inc(&full_bio->bi_remaining); + bio_inc_remaining(full_bio); } increment_pending_exceptions_done_count(); diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index 921aafd12aee..342dbdad6131 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -795,7 +795,7 @@ static void process_prepared_mapping_fail(struct dm_thin_new_mapping *m) { if (m->bio) { m->bio->bi_end_io = m->saved_bi_end_io; - atomic_inc(&m->bio->bi_remaining); + bio_inc_remaining(m->bio); } cell_error(m->tc->pool, m->cell); list_del(&m->list); @@ -812,7 +812,7 @@ static void process_prepared_mapping(struct dm_thin_new_mapping *m) bio = m->bio; if (bio) { bio->bi_end_io = m->saved_bi_end_io; - atomic_inc(&bio->bi_remaining); + bio_inc_remaining(bio); } if (m->err) { diff --git a/include/linux/bio.h b/include/linux/bio.h index da3a127c9958..8bfe9eee6d1a 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -644,6 +644,17 @@ static inline struct bio *bio_list_get(struct bio_list *bl) return bio; } +/* + * Increment chain count for the bio. Make sure the CHAIN flag update + * is visible before the raised count. + */ +static inline void bio_inc_remaining(struct bio *bio) +{ + bio->bi_flags |= (1 << BIO_CHAIN); + smp_mb__before_atomic(); + atomic_inc(&bio->__bi_remaining); +} + /* * bio_set is used to allow other portions of the IO system to * allocate their own private memory pools for bio and iovec structures. diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index a1b25e35ea5f..8b07e0603887 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -65,7 +65,7 @@ struct bio { unsigned int bi_seg_front_size; unsigned int bi_seg_back_size; - atomic_t bi_remaining; + atomic_t __bi_remaining; bio_end_io_t *bi_end_io; @@ -122,6 +122,7 @@ struct bio { #define BIO_NULL_MAPPED 8 /* contains invalid user pages */ #define BIO_QUIET 9 /* Make BIO Quiet */ #define BIO_SNAP_STABLE 10 /* bio data must be snapshotted during write */ +#define BIO_CHAIN 11 /* chained bio, ->bi_remaining in effect */ /* * Flags starting here get preserved by bio_reset() - this includes -- cgit v1.2.3 From dac56212e8127dbc0bff7be35c508bc280213309 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 17 Apr 2015 16:23:59 -0600 Subject: bio: skip atomic inc/dec of ->bi_cnt for most use cases Struct bio has a reference count that controls when it can be freed. Most uses cases is allocating the bio, which then returns with a single reference to it, doing IO, and then dropping that single reference. We can remove this atomic_dec_and_test() in the completion path, if nobody else is holding a reference to the bio. If someone does call bio_get() on the bio, then we flag the bio as now having valid count and that we must properly honor the reference count when it's being put. Tested-by: Robert Elliott Signed-off-by: Jens Axboe --- block/bio.c | 18 +++++++++++------- drivers/md/bcache/request.c | 2 +- fs/btrfs/volumes.c | 2 +- fs/xfs/xfs_aops.c | 1 - include/linux/bio.h | 16 +++++++++++++++- include/linux/blk_types.h | 3 ++- 6 files changed, 30 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/block/bio.c b/block/bio.c index 117da319afb6..c2ff8a88aef1 100644 --- a/block/bio.c +++ b/block/bio.c @@ -271,7 +271,7 @@ void bio_init(struct bio *bio) memset(bio, 0, sizeof(*bio)); bio->bi_flags = 1 << BIO_UPTODATE; atomic_set(&bio->__bi_remaining, 1); - atomic_set(&bio->bi_cnt, 1); + atomic_set(&bio->__bi_cnt, 1); } EXPORT_SYMBOL(bio_init); @@ -524,13 +524,17 @@ EXPORT_SYMBOL(zero_fill_bio); **/ void bio_put(struct bio *bio) { - BIO_BUG_ON(!atomic_read(&bio->bi_cnt)); - - /* - * last put frees it - */ - if (atomic_dec_and_test(&bio->bi_cnt)) + if (!bio_flagged(bio, BIO_REFFED)) bio_free(bio); + else { + BIO_BUG_ON(!atomic_read(&bio->__bi_cnt)); + + /* + * last put frees it + */ + if (atomic_dec_and_test(&bio->__bi_cnt)) + bio_free(bio); + } } EXPORT_SYMBOL(bio_put); diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index ab43faddb447..1616f668a4cb 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -619,7 +619,7 @@ static void do_bio_hook(struct search *s, struct bio *orig_bio) bio->bi_end_io = request_endio; bio->bi_private = &s->cl; - atomic_set(&bio->bi_cnt, 3); + bio_cnt_set(bio, 3); } static void search_free(struct closure *cl) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 96aebf3bcd5b..8e8d1d1e28a5 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -345,7 +345,7 @@ loop_lock: waitqueue_active(&fs_info->async_submit_wait)) wake_up(&fs_info->async_submit_wait); - BUG_ON(atomic_read(&cur->bi_cnt) == 0); + BUG_ON(atomic_read(&cur->__bi_cnt) == 0); /* * if we're doing the sync list, record that our diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index a56960dd1684..095f94c2d8b5 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -356,7 +356,6 @@ xfs_end_bio( { xfs_ioend_t *ioend = bio->bi_private; - ASSERT(atomic_read(&bio->bi_cnt) >= 1); ioend->io_error = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : error; /* Toss bio and pass work off to an xfsdatad thread */ diff --git a/include/linux/bio.h b/include/linux/bio.h index 8bfe9eee6d1a..7486ea103f6e 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -290,7 +290,21 @@ static inline unsigned bio_segments(struct bio *bio) * returns. and then bio would be freed memory when if (bio->bi_flags ...) * runs */ -#define bio_get(bio) atomic_inc(&(bio)->bi_cnt) +static inline void bio_get(struct bio *bio) +{ + bio->bi_flags |= (1 << BIO_REFFED); + smp_mb__before_atomic(); + atomic_inc(&bio->__bi_cnt); +} + +static inline void bio_cnt_set(struct bio *bio, unsigned int count) +{ + if (count != 1) { + bio->bi_flags |= (1 << BIO_REFFED); + smp_mb__before_atomic(); + } + atomic_set(&bio->__bi_cnt, count); +} enum bip_flags { BIP_BLOCK_INTEGRITY = 1 << 0, /* block layer owns integrity data */ diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 8b07e0603887..93d2e7153816 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -92,7 +92,7 @@ struct bio { unsigned short bi_max_vecs; /* max bvl_vecs we can hold */ - atomic_t bi_cnt; /* pin count */ + atomic_t __bi_cnt; /* pin count */ struct bio_vec *bi_io_vec; /* the actual vec list */ @@ -123,6 +123,7 @@ struct bio { #define BIO_QUIET 9 /* Make BIO Quiet */ #define BIO_SNAP_STABLE 10 /* bio data must be snapshotted during write */ #define BIO_CHAIN 11 /* chained bio, ->bi_remaining in effect */ +#define BIO_REFFED 12 /* bio has elevated ->bi_cnt */ /* * Flags starting here get preserved by bio_reset() - this includes -- cgit v1.2.3 From 84be456f883c4685680fba8e5154b5f72e92957e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 1 May 2015 12:46:15 +0200 Subject: remove We don't have any arch specific scatterlist now that parisc switched over to the generic one. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- arch/alpha/include/asm/pci.h | 2 +- arch/arm/include/asm/dma.h | 2 +- arch/arm/mach-footbridge/dma.c | 2 +- arch/blackfin/include/asm/pci.h | 2 +- arch/cris/include/asm/dma-mapping.h | 2 +- arch/cris/include/asm/pci.h | 2 +- arch/frv/include/asm/dma-mapping.h | 2 +- arch/frv/include/asm/pci.h | 2 +- arch/ia64/include/asm/pci.h | 2 +- arch/microblaze/include/asm/pci.h | 2 +- arch/mips/include/asm/dma-mapping.h | 2 +- arch/mips/include/asm/pci.h | 2 +- arch/mn10300/include/asm/pci.h | 2 +- arch/parisc/include/asm/dma-mapping.h | 2 +- arch/parisc/include/asm/pci.h | 2 +- arch/powerpc/include/asm/pci.h | 2 +- arch/powerpc/include/asm/vio.h | 2 +- arch/sparc/kernel/iommu_common.h | 2 +- arch/x86/include/asm/pci.h | 2 +- arch/xtensa/include/asm/pci.h | 2 +- drivers/mmc/host/android-goldfish.c | 2 +- include/asm-generic/scatterlist.h | 34 ------------------------------ include/linux/blkdev.h | 3 +-- include/linux/dmapool.h | 2 +- include/linux/scatterlist.h | 39 ++++++++++++++++++++++++++++------- lib/swiotlb.c | 2 +- 26 files changed, 56 insertions(+), 66 deletions(-) delete mode 100644 include/asm-generic/scatterlist.h (limited to 'include') diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index f7f680f7457d..bf7d97dce9e8 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -5,7 +5,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 99084431d6ae..bb4fa67da541 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,7 +19,7 @@ * It should not be re-used except for that purpose. */ #include -#include +#include #include diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index e2e0df8bcee2..22536b85a81d 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -13,9 +13,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index c737909fba47..14efc0db1ade 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -3,7 +3,7 @@ #ifndef _ASM_BFIN_PCI_H #define _ASM_BFIN_PCI_H -#include +#include #include #include diff --git a/arch/cris/include/asm/dma-mapping.h b/arch/cris/include/asm/dma-mapping.h index 2f0f654f1b44..57f794ee6039 100644 --- a/arch/cris/include/asm/dma-mapping.h +++ b/arch/cris/include/asm/dma-mapping.h @@ -5,10 +5,10 @@ #include #include +#include #include #include -#include #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h index cc2399c175e9..c15b4b4baafa 100644 --- a/arch/cris/include/asm/pci.h +++ b/arch/cris/include/asm/pci.h @@ -29,7 +29,7 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); #include #include -#include +#include #include #include diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h index 1746a2b8e6e7..2840adcd6d92 100644 --- a/arch/frv/include/asm/dma-mapping.h +++ b/arch/frv/include/asm/dma-mapping.h @@ -2,9 +2,9 @@ #define _ASM_DMA_MAPPING_H #include +#include #include #include -#include #include /* diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h index 2035a4d3f9b9..43d224685144 100644 --- a/arch/frv/include/asm/pci.h +++ b/arch/frv/include/asm/pci.h @@ -14,7 +14,7 @@ #define _ASM_FRV_PCI_H #include -#include +#include #include #include diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 52af5ed9f60b..0c0e25d6427a 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -6,9 +6,9 @@ #include #include #include +#include #include -#include #include struct pci_vector_struct { diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 468aca8cec0d..81f27aef979c 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -16,8 +16,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index fd1b4a150759..360b3387182a 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -1,7 +1,7 @@ #ifndef _ASM_DMA_MAPPING_H #define _ASM_DMA_MAPPING_H -#include +#include #include #include #include diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index d9692993fc83..3413b10d833b 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -99,7 +99,7 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, #include #include -#include +#include #include #include #include diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 5f70af25c7d0..393b51d38f36 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -55,7 +55,7 @@ void pcibios_set_master(struct pci_dev *dev); #include #include -#include +#include #include #include diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index d0eae5f2bd87..d8d60a57183f 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -2,8 +2,8 @@ #define _PARISC_DMA_MAPPING_H #include +#include #include -#include /* See Documentation/DMA-API-HOWTO.txt */ struct hppa_dma_ops { diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 20df2b04fc09..794d8820db5d 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -1,7 +1,7 @@ #ifndef __ASM_PARISC_PCI_H #define __ASM_PARISC_PCI_H -#include +#include diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 4aef8d660999..3be43ab63181 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -13,9 +13,9 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h index 4f9b7ca0710f..84286ec77b12 100644 --- a/arch/powerpc/include/asm/vio.h +++ b/arch/powerpc/include/asm/vio.h @@ -19,9 +19,9 @@ #include #include #include +#include #include -#include /* * Architecture-specific constants for drivers to diff --git a/arch/sparc/kernel/iommu_common.h b/arch/sparc/kernel/iommu_common.h index f4be0d724fc6..b40cec252905 100644 --- a/arch/sparc/kernel/iommu_common.h +++ b/arch/sparc/kernel/iommu_common.h @@ -13,9 +13,9 @@ #include #include #include +#include #include -#include /* * These give mapping size of each iommu pte/tlb. diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 4e370a5d8117..81da003df21b 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -5,7 +5,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h index 5d52dc43dfe7..e438a00fbd63 100644 --- a/arch/xtensa/include/asm/pci.h +++ b/arch/xtensa/include/asm/pci.h @@ -33,7 +33,7 @@ extern struct pci_controller* pcibios_alloc_controller(void); #include #include -#include +#include #include #include diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c index 8b4e20a3f16c..b1eac719a4cc 100644 --- a/drivers/mmc/host/android-goldfish.c +++ b/drivers/mmc/host/android-goldfish.c @@ -42,10 +42,10 @@ #include #include #include +#include #include #include -#include #include #include diff --git a/include/asm-generic/scatterlist.h b/include/asm-generic/scatterlist.h deleted file mode 100644 index 5de07355fad4..000000000000 --- a/include/asm-generic/scatterlist.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_GENERIC_SCATTERLIST_H -#define __ASM_GENERIC_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - dma_addr_t dma_address; -#ifdef CONFIG_NEED_SG_DMA_LENGTH - unsigned int dma_length; -#endif -}; - -/* - * These macros should be used after a dma_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) - -#ifdef CONFIG_NEED_SG_DMA_LENGTH -#define sg_dma_len(sg) ((sg)->dma_length) -#else -#define sg_dma_len(sg) ((sg)->length) -#endif - -#endif /* __ASM_GENERIC_SCATTERLIST_H */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7f9a516f24de..504af1e65ce1 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -22,8 +22,7 @@ #include #include #include - -#include +#include struct module; struct scsi_ioctl_command; diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h index 52456aa566a0..e1043f79122f 100644 --- a/include/linux/dmapool.h +++ b/include/linux/dmapool.h @@ -11,8 +11,8 @@ #ifndef LINUX_DMAPOOL_H #define LINUX_DMAPOOL_H +#include #include -#include struct device; diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index ed8f9e70df9b..eca1ec93775c 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -2,13 +2,39 @@ #define _LINUX_SCATTERLIST_H #include +#include #include #include - -#include -#include #include +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; + dma_addr_t dma_address; +#ifdef CONFIG_NEED_SG_DMA_LENGTH + unsigned int dma_length; +#endif +}; + +/* + * These macros should be used after a dma_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries dma_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) + +#ifdef CONFIG_NEED_SG_DMA_LENGTH +#define sg_dma_len(sg) ((sg)->dma_length) +#else +#define sg_dma_len(sg) ((sg)->length) +#endif + struct sg_table { struct scatterlist *sgl; /* the list */ unsigned int nents; /* number of mapped entries */ @@ -18,10 +44,9 @@ struct sg_table { /* * Notes on SG table design. * - * Architectures must provide an unsigned long page_link field in the - * scatterlist struct. We use that to place the page pointer AND encode - * information about the sg table as well. The two lower bits are reserved - * for this information. + * We use the unsigned long page_link field in the scatterlist struct to place + * the page pointer AND encode information about the sg table as well. The two + * lower bits are reserved for this information. * * If bit 0 is set, then the page_link contains a pointer to the next sg * table list. Otherwise the next entry is at sg + 1. diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 4abda074ea45..341268841b31 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -29,10 +29,10 @@ #include #include #include +#include #include #include -#include #include #include -- cgit v1.2.3 From 4f8c9510ba71bb54477841bebb90154ef140860f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:16 +0200 Subject: block: rename REQ_TYPE_SPECIAL to REQ_TYPE_DRV_PRIV Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- drivers/block/paride/pd.c | 4 ++-- drivers/block/sx8.c | 4 ++-- drivers/block/virtio_blk.c | 6 +++--- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-cd.c | 2 +- drivers/ide/ide-cd_ioctl.c | 2 +- drivers/ide/ide-devsets.c | 2 +- drivers/ide/ide-eh.c | 2 +- drivers/ide/ide-floppy.c | 6 +++--- drivers/ide/ide-io.c | 4 ++-- drivers/ide/ide-ioctls.c | 2 +- drivers/ide/ide-park.c | 4 ++-- drivers/ide/ide-tape.c | 4 ++-- include/linux/blkdev.h | 4 ++-- 15 files changed, 26 insertions(+), 26 deletions(-) (limited to 'include') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 39e5f7fae3ef..9cf52ac328fe 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -592,7 +592,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, fsync_bdev(bdev); mutex_lock(&nbd->tx_lock); blk_rq_init(NULL, &sreq); - sreq.cmd_type = REQ_TYPE_SPECIAL; + sreq.cmd_type = REQ_TYPE_DRV_PRIV; nbd_cmd(&sreq) = NBD_CMD_DISC; /* Check again after getting mutex back. */ diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index d48715b287e6..dbb4da1cdca8 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -442,7 +442,7 @@ static char *pd_buf; /* buffer for request in progress */ static enum action do_pd_io_start(void) { - if (pd_req->cmd_type == REQ_TYPE_SPECIAL) { + if (pd_req->cmd_type == REQ_TYPE_DRV_PRIV) { phase = pd_special; return pd_special(); } @@ -725,7 +725,7 @@ static int pd_special_command(struct pd_unit *disk, if (IS_ERR(rq)) return PTR_ERR(rq); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->special = func; err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0); diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index 5d552857de41..59c91d49b14b 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -620,7 +620,7 @@ static int carm_array_info (struct carm_host *host, unsigned int array_idx) spin_unlock_irq(&host->lock); DPRINTK("blk_execute_rq_nowait, tag == %u\n", idx); - crq->rq->cmd_type = REQ_TYPE_SPECIAL; + crq->rq->cmd_type = REQ_TYPE_DRV_PRIV; crq->rq->special = crq; blk_execute_rq_nowait(host->oob_q, NULL, crq->rq, true, NULL); @@ -661,7 +661,7 @@ static int carm_send_special (struct carm_host *host, carm_sspc_t func) crq->msg_bucket = (u32) rc; DPRINTK("blk_execute_rq_nowait, tag == %u\n", idx); - crq->rq->cmd_type = REQ_TYPE_SPECIAL; + crq->rq->cmd_type = REQ_TYPE_DRV_PRIV; crq->rq->special = crq; blk_execute_rq_nowait(host->oob_q, NULL, crq->rq, true, NULL); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 5ea2f0bbbc7c..d4d05f064d39 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -124,7 +124,7 @@ static inline void virtblk_request_done(struct request *req) req->resid_len = virtio32_to_cpu(vblk->vdev, vbr->in_hdr.residual); req->sense_len = virtio32_to_cpu(vblk->vdev, vbr->in_hdr.sense_len); req->errors = virtio32_to_cpu(vblk->vdev, vbr->in_hdr.errors); - } else if (req->cmd_type == REQ_TYPE_SPECIAL) { + } else if (req->cmd_type == REQ_TYPE_DRV_PRIV) { req->errors = (error != 0); } @@ -188,7 +188,7 @@ static int virtio_queue_rq(struct blk_mq_hw_ctx *hctx, vbr->out_hdr.sector = 0; vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req)); break; - case REQ_TYPE_SPECIAL: + case REQ_TYPE_DRV_PRIV: vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID); vbr->out_hdr.sector = 0; vbr->out_hdr.ioprio = cpu_to_virtio32(vblk->vdev, req_get_ioprio(vbr->req)); @@ -251,7 +251,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str) return PTR_ERR(req); } - req->cmd_type = REQ_TYPE_SPECIAL; + req->cmd_type = REQ_TYPE_DRV_PRIV; err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false); blk_put_request(req); diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index fac3d9da2e07..b367300ce479 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -93,7 +93,7 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, int error; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->special = (char *)pc; if (buf && bufflen) { @@ -477,7 +477,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (uptodate == 0) drive->failed_pc = NULL; - if (rq->cmd_type == REQ_TYPE_SPECIAL) { + if (rq->cmd_type == REQ_TYPE_DRV_PRIV) { rq->errors = 0; error = 0; } else { diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 0b510bafd90e..9a32603c6c74 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -799,7 +799,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cdrom_do_block_pc(drive, rq); break; - case REQ_TYPE_SPECIAL: + case REQ_TYPE_DRV_PRIV: /* right now this can only be a reset... */ uptodate = 1; goto out_end; diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 02caa7dd51c8..066e39036518 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -304,7 +304,7 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi) int ret; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->cmd_flags = REQ_QUIET; ret = blk_execute_rq(drive->queue, cd->disk, rq, 0); blk_put_request(rq); diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 9e98122f646e..b05a74d78ef5 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c @@ -166,7 +166,7 @@ int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting, return setting->set(drive, arg); rq = blk_get_request(q, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->cmd_len = 5; rq->cmd[0] = REQ_DEVSET_EXEC; *(int *)&rq->cmd[1] = arg; diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index 32970664c275..19d809c48a8d 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -147,7 +147,7 @@ static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) { struct request *rq = drive->hwif->rq; - if (rq && rq->cmd_type == REQ_TYPE_SPECIAL && + if (rq && rq->cmd_type == REQ_TYPE_DRV_PRIV && rq->cmd[0] == REQ_DRIVE_RESET) { if (err <= 0 && rq->errors == 0) rq->errors = -EIO; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8c6363cdd208..3dbfa5b6db6a 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -97,7 +97,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc) "Aborting request!\n"); } - if (rq->cmd_type == REQ_TYPE_SPECIAL) + if (rq->cmd_type == REQ_TYPE_DRV_PRIV) rq->errors = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; return uptodate; @@ -246,7 +246,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } else printk(KERN_ERR PFX "%s: I/O error\n", drive->name); - if (rq->cmd_type == REQ_TYPE_SPECIAL) { + if (rq->cmd_type == REQ_TYPE_DRV_PRIV) { rq->errors = 0; ide_complete_rq(drive, 0, blk_rq_bytes(rq)); return ide_stopped; @@ -265,7 +265,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); break; - case REQ_TYPE_SPECIAL: + case REQ_TYPE_DRV_PRIV: case REQ_TYPE_SENSE: pc = (struct ide_atapi_pc *)rq->special; break; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 177db6d5b2f5..8e55abd03a24 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -135,7 +135,7 @@ EXPORT_SYMBOL(ide_complete_rq); void ide_kill_rq(ide_drive_t *drive, struct request *rq) { - u8 drv_req = (rq->cmd_type == REQ_TYPE_SPECIAL) && rq->rq_disk; + u8 drv_req = (rq->cmd_type == REQ_TYPE_DRV_PRIV) && rq->rq_disk; u8 media = drive->media; drive->failed_pc = NULL; @@ -353,7 +353,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_rq(drive, rq); return startstop; - } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_SPECIAL) + } else if (!rq->rq_disk && rq->cmd_type == REQ_TYPE_DRV_PRIV) /* * TODO: Once all ULDs have been modified to * check for specific op codes rather than diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index 6233fa2cb8a9..aa2e9b77b20d 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -222,7 +222,7 @@ static int generic_drive_reset(ide_drive_t *drive) int ret = 0; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; if (blk_execute_rq(drive->queue, NULL, rq, 1)) diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index ca958604cda2..c80868520488 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -34,7 +34,7 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) rq = blk_get_request(q, READ, __GFP_WAIT); rq->cmd[0] = REQ_PARK_HEADS; rq->cmd_len = 1; - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->special = &timeout; rc = blk_execute_rq(q, NULL, rq, 1); blk_put_request(rq); @@ -51,7 +51,7 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) rq->cmd[0] = REQ_UNPARK_HEADS; rq->cmd_len = 1; - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; elv_add_request(q, rq, ELEVATOR_INSERT_FRONT); out: diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6eb738ca6d2f..2a5d543db9f5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -576,7 +576,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, rq->cmd[0], (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); - BUG_ON(!(rq->cmd_type == REQ_TYPE_SPECIAL || + BUG_ON(!(rq->cmd_type == REQ_TYPE_DRV_PRIV || rq->cmd_type == REQ_TYPE_SENSE)); /* Retry a failed packet command */ @@ -853,7 +853,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_type = REQ_TYPE_DRV_PRIV; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; rq->__sector = tape->first_frame; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7f9a516f24de..98c90272443b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -79,10 +79,10 @@ enum rq_cmd_type_bits { REQ_TYPE_PM_SUSPEND, /* suspend request */ REQ_TYPE_PM_RESUME, /* resume request */ REQ_TYPE_PM_SHUTDOWN, /* shutdown request */ - REQ_TYPE_SPECIAL, /* driver defined type */ + REQ_TYPE_DRV_PRIV, /* driver defined type */ /* * for ATA/ATAPI devices. this really doesn't belong here, ide should - * use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver + * use REQ_TYPE_DRV_PRIV and use rq->cmd[0] with the range of driver * private REQ_LB opcodes to differentiate what type of request this is */ REQ_TYPE_ATA_TASKFILE, -- cgit v1.2.3 From b42171ef7d938a66fa52e66a3d911ed63770b5ca Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:17 +0200 Subject: block: move REQ_TYPE_ATA_TASKFILE and REQ_TYPE_ATA_PC to ide.h These values are only used by the IDE driver, so move them into it by allowing drivers to take cmd_type values after the first private one. Note that we have to turn cmd_type into a plain unsigned integer so that gcc doesn't complain about mismatching enum types. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 11 ++--------- include/linux/ide.h | 7 +++++++ 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 98c90272443b..9cb4d80a4987 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -79,14 +79,7 @@ enum rq_cmd_type_bits { REQ_TYPE_PM_SUSPEND, /* suspend request */ REQ_TYPE_PM_RESUME, /* resume request */ REQ_TYPE_PM_SHUTDOWN, /* shutdown request */ - REQ_TYPE_DRV_PRIV, /* driver defined type */ - /* - * for ATA/ATAPI devices. this really doesn't belong here, ide should - * use REQ_TYPE_DRV_PRIV and use rq->cmd[0] with the range of driver - * private REQ_LB opcodes to differentiate what type of request this is - */ - REQ_TYPE_ATA_TASKFILE, - REQ_TYPE_ATA_PC, + REQ_TYPE_DRV_PRIV, /* driver defined types from here */ }; #define BLK_MAX_CDB 16 @@ -108,7 +101,7 @@ struct request { struct blk_mq_ctx *mq_ctx; u64 cmd_flags; - enum rq_cmd_type_bits cmd_type; + unsigned cmd_type; unsigned long atomic_flags; int cpu; diff --git a/include/linux/ide.h b/include/linux/ide.h index 93b5ca754b5b..62ac399144a6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -39,6 +39,12 @@ struct device; +/* IDE-specific values for req->cmd_type */ +enum ata_cmd_type_bits { + REQ_TYPE_ATA_TASKFILE = REQ_TYPE_DRV_PRIV + 1, + REQ_TYPE_ATA_PC, +}; + /* Error codes returned in rq->errors to the higher part of the driver. */ enum { IDE_DRV_ERROR_GENERAL = 101, @@ -1551,4 +1557,5 @@ static inline void ide_set_drivedata(ide_drive_t *drive, void *data) #define ide_host_for_each_port(i, port, host) \ for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++) + #endif /* _IDE_H */ -- cgit v1.2.3 From b0b93b48a30e809240ddd7449a6ad60a5ddf7b4d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:18 +0200 Subject: block: move REQ_TYPE_SENSE to the ide driver Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 6 +++--- drivers/ide/ide-cd.c | 8 ++++---- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- include/linux/blkdev.h | 1 - include/linux/ide.h | 1 + 6 files changed, 10 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index b367300ce479..1362ad80a76c 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -191,7 +191,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) BUG_ON(sense_len > sizeof(*sense)); - if (rq->cmd_type == REQ_TYPE_SENSE || drive->sense_rq_armed) + if (rq->cmd_type == REQ_TYPE_ATA_SENSE || drive->sense_rq_armed) return; memset(sense, 0, sizeof(*sense)); @@ -210,7 +210,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; sense_rq->cmd[4] = cmd_len; - sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_type = REQ_TYPE_ATA_SENSE; sense_rq->cmd_flags |= REQ_PREEMPT; if (drive->media == ide_tape) @@ -310,7 +310,7 @@ int ide_cd_get_xferlen(struct request *rq) switch (rq->cmd_type) { case REQ_TYPE_FS: return 32768; - case REQ_TYPE_SENSE: + case REQ_TYPE_ATA_SENSE: case REQ_TYPE_BLOCK_PC: case REQ_TYPE_ATA_PC: return blk_rq_bytes(rq); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 9a32603c6c74..64a6b827b3dd 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -210,7 +210,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* - * For REQ_TYPE_SENSE, "rq->special" points to the original + * For REQ_TYPE_ATA_SENSE, "rq->special" points to the original * failed request. Also, the sense data should be read * directly from rq which might be different from the original * sense buffer if it got copied during mapping. @@ -285,7 +285,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) "stat 0x%x", rq->cmd[0], rq->cmd_type, err, stat); - if (rq->cmd_type == REQ_TYPE_SENSE) { + if (rq->cmd_type == REQ_TYPE_ATA_SENSE) { /* * We got an error trying to get sense info from the drive * (probably while trying to recover from a former error). @@ -526,7 +526,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0; - int sense = (rq->cmd_type == REQ_TYPE_SENSE); + int sense = (rq->cmd_type == REQ_TYPE_ATA_SENSE); unsigned int timeout; u16 len; u8 ireason, stat; @@ -791,7 +791,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, if (cdrom_start_rw(drive, rq) == ide_stopped) goto out_end; break; - case REQ_TYPE_SENSE: + case REQ_TYPE_ATA_SENSE: case REQ_TYPE_BLOCK_PC: case REQ_TYPE_ATA_PC: if (!rq->timeout) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3dbfa5b6db6a..2fb5350c5410 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -266,7 +266,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); break; case REQ_TYPE_DRV_PRIV: - case REQ_TYPE_SENSE: + case REQ_TYPE_ATA_SENSE: pc = (struct ide_atapi_pc *)rq->special; break; case REQ_TYPE_BLOCK_PC: diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2a5d543db9f5..f5d51d1d09ee 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -577,7 +577,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, blk_rq_sectors(rq)); BUG_ON(!(rq->cmd_type == REQ_TYPE_DRV_PRIV || - rq->cmd_type == REQ_TYPE_SENSE)); + rq->cmd_type == REQ_TYPE_ATA_SENSE)); /* Retry a failed packet command */ if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9cb4d80a4987..6076b9e18dcb 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -75,7 +75,6 @@ struct request_list { enum rq_cmd_type_bits { REQ_TYPE_FS = 1, /* fs request */ REQ_TYPE_BLOCK_PC, /* scsi command */ - REQ_TYPE_SENSE, /* sense request */ REQ_TYPE_PM_SUSPEND, /* suspend request */ REQ_TYPE_PM_RESUME, /* resume request */ REQ_TYPE_PM_SHUTDOWN, /* shutdown request */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 62ac399144a6..9856b7d455d9 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -43,6 +43,7 @@ struct device; enum ata_cmd_type_bits { REQ_TYPE_ATA_TASKFILE = REQ_TYPE_DRV_PRIV + 1, REQ_TYPE_ATA_PC, + REQ_TYPE_ATA_SENSE, /* sense request */ }; /* Error codes returned in rq->errors to the higher part of the driver. */ -- cgit v1.2.3 From ac7cdff00a33d48d27217560fa3b16d802e5f535 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:19 +0200 Subject: block: remove REQ_TYPE_PM_SHUTDOWN Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6076b9e18dcb..c2829ba5e738 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -77,7 +77,6 @@ enum rq_cmd_type_bits { REQ_TYPE_BLOCK_PC, /* scsi command */ REQ_TYPE_PM_SUSPEND, /* suspend request */ REQ_TYPE_PM_RESUME, /* resume request */ - REQ_TYPE_PM_SHUTDOWN, /* shutdown request */ REQ_TYPE_DRV_PRIV, /* driver defined types from here */ }; -- cgit v1.2.3 From a7928c1578c550bd6f4dec62d65132e6db226c57 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:20 +0200 Subject: block: move PM request support to IDE This removes the request types and hacks from the block code and into the old IDE driver. There is a small amunt of code duplication due to this, but it's not too bad. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 1 + block/blk-exec.c | 10 --------- block/blk.h | 2 -- drivers/ide/ide-eh.c | 2 +- drivers/ide/ide-io.c | 8 +++---- drivers/ide/ide-pm.c | 56 +++++++++++++++++++++++++++++++++++----------- drivers/ide/ide-taskfile.c | 2 +- include/linux/blkdev.h | 21 +---------------- include/linux/ide.h | 19 ++++++++++++++++ 9 files changed, 70 insertions(+), 51 deletions(-) (limited to 'include') diff --git a/block/blk-core.c b/block/blk-core.c index fd154b94447a..2e5020f37d55 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -285,6 +285,7 @@ inline void __blk_run_queue_uncond(struct request_queue *q) q->request_fn(q); q->request_fn_active--; } +EXPORT_SYMBOL_GPL(__blk_run_queue_uncond); /** * __blk_run_queue - run a single device queue diff --git a/block/blk-exec.c b/block/blk-exec.c index 9924725fa50d..3fec8a29d0fa 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -53,7 +53,6 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, rq_end_io_fn *done) { int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK; - bool is_pm_resume; WARN_ON(irqs_disabled()); WARN_ON(rq->cmd_type == REQ_TYPE_FS); @@ -70,12 +69,6 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, return; } - /* - * need to check this before __blk_run_queue(), because rq can - * be freed before that returns. - */ - is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME; - spin_lock_irq(q->queue_lock); if (unlikely(blk_queue_dying(q))) { @@ -88,9 +81,6 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, __elv_add_request(q, rq, where); __blk_run_queue(q); - /* the queue is stopped so it won't be run */ - if (is_pm_resume) - __blk_run_queue_uncond(q); spin_unlock_irq(q->queue_lock); } EXPORT_SYMBOL_GPL(blk_execute_rq_nowait); diff --git a/block/blk.h b/block/blk.h index 43b036185712..4b48d55e588e 100644 --- a/block/blk.h +++ b/block/blk.h @@ -193,8 +193,6 @@ int blk_try_merge(struct request *rq, struct bio *bio); void blk_queue_congestion_threshold(struct request_queue *q); -void __blk_run_queue_uncond(struct request_queue *q); - int blk_dev_init(void); diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c index 19d809c48a8d..d6da011299f5 100644 --- a/drivers/ide/ide-eh.c +++ b/drivers/ide/ide-eh.c @@ -129,7 +129,7 @@ ide_startstop_t ide_error(ide_drive_t *drive, const char *msg, u8 stat) if (cmd) ide_complete_cmd(drive, cmd, stat, err); - } else if (blk_pm_request(rq)) { + } else if (ata_pm_request(rq)) { rq->errors = 1; ide_complete_pm_rq(drive, rq); return ide_stopped; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 8e55abd03a24..669ea1e45795 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -320,7 +320,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) goto kill_rq; } - if (blk_pm_request(rq)) + if (ata_pm_request(rq)) ide_check_pm_state(drive, rq); drive->hwif->tp_ops->dev_select(drive); @@ -342,8 +342,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); - else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->special; + else if (ata_pm_request(rq)) { + struct ide_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); @@ -538,7 +538,7 @@ repeat: * state machine. */ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && - blk_pm_request(rq) == 0 && + ata_pm_request(rq) == 0 && (rq->cmd_flags & REQ_PREEMPT) == 0) { /* there should be no pending command at this point */ ide_unlock_port(hwif); diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 8d1e32d7cd97..081e43458d50 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -8,7 +8,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; - struct request_pm_state rqpm; + struct ide_pm_state rqpm; int ret; if (ide_port_acpi(hwif)) { @@ -19,7 +19,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_PM_SUSPEND; + rq->cmd_type = REQ_TYPE_ATA_PM_SUSPEND; rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) @@ -38,13 +38,43 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) return ret; } +static void ide_end_sync_rq(struct request *rq, int error) +{ + complete(rq->end_io_data); +} + +static int ide_pm_execute_rq(struct request *rq) +{ + struct request_queue *q = rq->q; + DECLARE_COMPLETION_ONSTACK(wait); + + rq->end_io_data = &wait; + rq->end_io = ide_end_sync_rq; + + spin_lock_irq(q->queue_lock); + if (unlikely(blk_queue_dying(q))) { + rq->cmd_flags |= REQ_QUIET; + rq->errors = -ENXIO; + __blk_end_request_all(rq, rq->errors); + spin_unlock_irq(q->queue_lock); + return -ENXIO; + } + __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT); + __blk_run_queue_uncond(q); + spin_unlock_irq(q->queue_lock); + + wait_for_completion_io(&wait); + + return rq->errors ? -EIO : 0; +} + int generic_ide_resume(struct device *dev) { ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; - struct request_pm_state rqpm; + struct ide_pm_state rqpm; int err; if (ide_port_acpi(hwif)) { @@ -59,13 +89,13 @@ int generic_ide_resume(struct device *dev) memset(&rqpm, 0, sizeof(rqpm)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); - rq->cmd_type = REQ_TYPE_PM_RESUME; + rq->cmd_type = REQ_TYPE_ATA_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; - err = blk_execute_rq(drive->queue, NULL, rq, 1); + err = ide_pm_execute_rq(rq); blk_put_request(rq); if (err == 0 && dev->driver) { @@ -80,7 +110,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->special; + struct ide_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -110,7 +140,7 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->special; + struct ide_pm_state *pm = rq->special; struct ide_cmd cmd = { }; switch (pm->pm_step) { @@ -182,7 +212,7 @@ out_do_tf: void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; - struct request_pm_state *pm = rq->special; + struct ide_pm_state *pm = rq->special; unsigned long flags; ide_complete_power_step(drive, rq); @@ -191,10 +221,10 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) #ifdef DEBUG_PM printk("%s: completing PM request, %s\n", drive->name, - (rq->cmd_type == REQ_TYPE_PM_SUSPEND) ? "suspend" : "resume"); + (rq->cmd_type == REQ_TYPE_ATA_PM_SUSPEND) ? "suspend" : "resume"); #endif spin_lock_irqsave(q->queue_lock, flags); - if (rq->cmd_type == REQ_TYPE_PM_SUSPEND) + if (rq->cmd_type == REQ_TYPE_ATA_PM_SUSPEND) blk_stop_queue(q); else drive->dev_flags &= ~IDE_DFLAG_BLOCKED; @@ -208,13 +238,13 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->special; + struct ide_pm_state *pm = rq->special; - if (rq->cmd_type == REQ_TYPE_PM_SUSPEND && + if (rq->cmd_type == REQ_TYPE_ATA_PM_SUSPEND && pm->pm_step == IDE_PM_START_SUSPEND) /* Mark drive blocked when starting the suspend sequence. */ drive->dev_flags |= IDE_DFLAG_BLOCKED; - else if (rq->cmd_type == REQ_TYPE_PM_RESUME && + else if (rq->cmd_type == REQ_TYPE_ATA_PM_RESUME && pm->pm_step == IDE_PM_START_RESUME) { /* * The first thing we do on wakeup is to wait for BSY bit to diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index dabb88b1cbec..0979e126fff1 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -186,7 +186,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive) tf->command == ATA_CMD_CHK_POWER) { struct request *rq = hwif->rq; - if (blk_pm_request(rq)) + if (ata_pm_request(rq)) ide_complete_pm_rq(drive, rq); else ide_finish_cmd(drive, cmd, stat); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c2829ba5e738..2da818a48097 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -30,7 +30,6 @@ struct scsi_ioctl_command; struct request_queue; struct elevator_queue; -struct request_pm_state; struct blk_trace; struct request; struct sg_io_hdr; @@ -75,8 +74,6 @@ struct request_list { enum rq_cmd_type_bits { REQ_TYPE_FS = 1, /* fs request */ REQ_TYPE_BLOCK_PC, /* scsi command */ - REQ_TYPE_PM_SUSPEND, /* suspend request */ - REQ_TYPE_PM_RESUME, /* resume request */ REQ_TYPE_DRV_PRIV, /* driver defined types from here */ }; @@ -207,19 +204,6 @@ static inline unsigned short req_get_ioprio(struct request *req) return req->ioprio; } -/* - * State information carried for REQ_TYPE_PM_SUSPEND and REQ_TYPE_PM_RESUME - * requests. Some step values could eventually be made generic. - */ -struct request_pm_state -{ - /* PM state machine step value, currently driver specific */ - int pm_step; - /* requested PM state value (S1, S2, S3, S4, ...) */ - u32 pm_state; - void* data; /* for driver use */ -}; - #include struct blk_queue_ctx; @@ -601,10 +585,6 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) (((rq)->cmd_flags & REQ_STARTED) && \ ((rq)->cmd_type == REQ_TYPE_FS)) -#define blk_pm_request(rq) \ - ((rq)->cmd_type == REQ_TYPE_PM_SUSPEND || \ - (rq)->cmd_type == REQ_TYPE_PM_RESUME) - #define blk_rq_cpu_valid(rq) ((rq)->cpu != -1) #define blk_bidi_rq(rq) ((rq)->next_rq != NULL) /* rq->queuelist of dequeued request must be list_empty() */ @@ -838,6 +818,7 @@ extern void blk_stop_queue(struct request_queue *q); extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(struct request_queue *q); extern void __blk_run_queue(struct request_queue *q); +extern void __blk_run_queue_uncond(struct request_queue *q); extern void blk_run_queue(struct request_queue *); extern void blk_run_queue_async(struct request_queue *q); extern int blk_rq_map_user(struct request_queue *, struct request *, diff --git a/include/linux/ide.h b/include/linux/ide.h index 9856b7d455d9..a633898f36ac 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -44,8 +44,14 @@ enum ata_cmd_type_bits { REQ_TYPE_ATA_TASKFILE = REQ_TYPE_DRV_PRIV + 1, REQ_TYPE_ATA_PC, REQ_TYPE_ATA_SENSE, /* sense request */ + REQ_TYPE_ATA_PM_SUSPEND,/* suspend request */ + REQ_TYPE_ATA_PM_RESUME, /* resume request */ }; +#define ata_pm_request(rq) \ + ((rq)->cmd_type == REQ_TYPE_ATA_PM_SUSPEND || \ + (rq)->cmd_type == REQ_TYPE_ATA_PM_RESUME) + /* Error codes returned in rq->errors to the higher part of the driver. */ enum { IDE_DRV_ERROR_GENERAL = 101, @@ -1321,6 +1327,19 @@ struct ide_port_info { u8 udma_mask; }; +/* + * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME + * requests. + */ +struct ide_pm_state { + /* PM state machine step value, currently driver specific */ + int pm_step; + /* requested PM state value (S1, S2, S3, S4, ...) */ + u32 pm_state; + void* data; /* for driver use */ +}; + + int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *); int ide_pci_init_two(struct pci_dev *, struct pci_dev *, const struct ide_port_info *, void *); -- cgit v1.2.3 From 9dc6c806b3c4812619e305685b3c86835bf784ab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Apr 2015 22:37:21 +0200 Subject: nbd: stop using req->cmd Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 48 +++++++++++++++++++++++------------------------- include/uapi/linux/nbd.h | 2 -- 2 files changed, 23 insertions(+), 27 deletions(-) (limited to 'include') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 9cf52ac328fe..83a7ba4a3eec 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -230,29 +230,40 @@ static int nbd_send_req(struct nbd_device *nbd, struct request *req) int result, flags; struct nbd_request request; unsigned long size = blk_rq_bytes(req); + u32 type; + + if (req->cmd_type == REQ_TYPE_DRV_PRIV) + type = NBD_CMD_DISC; + else if (req->cmd_flags & REQ_DISCARD) + type = NBD_CMD_TRIM; + else if (req->cmd_flags & REQ_FLUSH) + type = NBD_CMD_FLUSH; + else if (rq_data_dir(req) == WRITE) + type = NBD_CMD_WRITE; + else + type = NBD_CMD_READ; memset(&request, 0, sizeof(request)); request.magic = htonl(NBD_REQUEST_MAGIC); - request.type = htonl(nbd_cmd(req)); - - if (nbd_cmd(req) != NBD_CMD_FLUSH && nbd_cmd(req) != NBD_CMD_DISC) { + request.type = htonl(type); + if (type != NBD_CMD_FLUSH && type != NBD_CMD_DISC) { request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9); request.len = htonl(size); } memcpy(request.handle, &req, sizeof(req)); dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%s@%llu,%uB)\n", - req, nbdcmd_to_ascii(nbd_cmd(req)), + req, nbdcmd_to_ascii(type), (unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req)); result = sock_xmit(nbd, 1, &request, sizeof(request), - (nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0); + (type == NBD_CMD_WRITE) ? MSG_MORE : 0); if (result <= 0) { dev_err(disk_to_dev(nbd->disk), "Send control failed (result %d)\n", result); return -EIO; } - if (nbd_cmd(req) == NBD_CMD_WRITE) { + if (type == NBD_CMD_WRITE) { struct req_iterator iter; struct bio_vec bvec; /* @@ -352,7 +363,7 @@ static struct request *nbd_read_stat(struct nbd_device *nbd) } dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", req); - if (nbd_cmd(req) == NBD_CMD_READ) { + if (rq_data_dir(req) != WRITE) { struct req_iterator iter; struct bio_vec bvec; @@ -452,23 +463,11 @@ static void nbd_handle_req(struct nbd_device *nbd, struct request *req) if (req->cmd_type != REQ_TYPE_FS) goto error_out; - nbd_cmd(req) = NBD_CMD_READ; - if (rq_data_dir(req) == WRITE) { - if ((req->cmd_flags & REQ_DISCARD)) { - WARN_ON(!(nbd->flags & NBD_FLAG_SEND_TRIM)); - nbd_cmd(req) = NBD_CMD_TRIM; - } else - nbd_cmd(req) = NBD_CMD_WRITE; - if (nbd->flags & NBD_FLAG_READ_ONLY) { - dev_err(disk_to_dev(nbd->disk), - "Write on read-only\n"); - goto error_out; - } - } - - if (req->cmd_flags & REQ_FLUSH) { - BUG_ON(unlikely(blk_rq_sectors(req))); - nbd_cmd(req) = NBD_CMD_FLUSH; + if (rq_data_dir(req) == WRITE && + (nbd->flags & NBD_FLAG_READ_ONLY)) { + dev_err(disk_to_dev(nbd->disk), + "Write on read-only\n"); + goto error_out; } req->errors = 0; @@ -593,7 +592,6 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, mutex_lock(&nbd->tx_lock); blk_rq_init(NULL, &sreq); sreq.cmd_type = REQ_TYPE_DRV_PRIV; - nbd_cmd(&sreq) = NBD_CMD_DISC; /* Check again after getting mutex back. */ if (!nbd->sock) diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h index 4f52549b23ff..e08e413d5f71 100644 --- a/include/uapi/linux/nbd.h +++ b/include/uapi/linux/nbd.h @@ -44,8 +44,6 @@ enum { /* there is a gap here to match userspace */ #define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ -#define nbd_cmd(req) ((req)->cmd[0]) - /* userspace doesn't need the nbd_device structure */ /* These are sent over the network in the request/reply magic fields */ -- cgit v1.2.3 From 2893c379461a208b3059f55dfe4dafa06b4aa46a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 31 Mar 2015 20:16:52 +0200 Subject: clk: make strings in parent name arrays const MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The clk functions and structs declare the parent_name arrays as 'const char **parent_names' which means the parent name strings are const, but the array itself is not. Use 'const char * const * parent_names' instead which also makes the array const. This allows us to put the parent_name arrays into the __initconst section. Signed-off-by: Sascha Hauer Reviewed-by: Krzysztof Kozlowski Tested-by: Krzysztof Kozlowski Acked-by: Uwe Kleine-König [sboyd@codeaurora.org: Squelch 80-character checkpatch warnings] Signed-off-by: Stephen Boyd --- drivers/clk/clk-composite.c | 2 +- drivers/clk/clk-mux.c | 6 ++++-- include/linux/clk-provider.h | 10 ++++++---- 3 files changed, 11 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c index 956b7e54fa1c..077f4c7148f1 100644 --- a/drivers/clk/clk-composite.c +++ b/drivers/clk/clk-composite.c @@ -188,7 +188,7 @@ static void clk_composite_disable(struct clk_hw *hw) } struct clk *clk_register_composite(struct device *dev, const char *name, - const char **parent_names, int num_parents, + const char * const *parent_names, int num_parents, struct clk_hw *mux_hw, const struct clk_ops *mux_ops, struct clk_hw *rate_hw, const struct clk_ops *rate_ops, struct clk_hw *gate_hw, const struct clk_ops *gate_ops, diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 69a094c3783d..6066a01b20ea 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -114,7 +114,8 @@ const struct clk_ops clk_mux_ro_ops = { EXPORT_SYMBOL_GPL(clk_mux_ro_ops); struct clk *clk_register_mux_table(struct device *dev, const char *name, - const char **parent_names, u8 num_parents, unsigned long flags, + const char * const *parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, u8 shift, u32 mask, u8 clk_mux_flags, u32 *table, spinlock_t *lock) { @@ -166,7 +167,8 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name, EXPORT_SYMBOL_GPL(clk_register_mux_table); struct clk *clk_register_mux(struct device *dev, const char *name, - const char **parent_names, u8 num_parents, unsigned long flags, + const char * const *parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock) { diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index df695313f975..5378c2aba4d2 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -209,7 +209,7 @@ struct clk_ops { struct clk_init_data { const char *name; const struct clk_ops *ops; - const char **parent_names; + const char * const *parent_names; u8 num_parents; unsigned long flags; }; @@ -426,12 +426,14 @@ extern const struct clk_ops clk_mux_ops; extern const struct clk_ops clk_mux_ro_ops; struct clk *clk_register_mux(struct device *dev, const char *name, - const char **parent_names, u8 num_parents, unsigned long flags, + const char * const *parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); struct clk *clk_register_mux_table(struct device *dev, const char *name, - const char **parent_names, u8 num_parents, unsigned long flags, + const char * const *parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, u8 shift, u32 mask, u8 clk_mux_flags, u32 *table, spinlock_t *lock); @@ -518,7 +520,7 @@ struct clk_composite { }; struct clk *clk_register_composite(struct device *dev, const char *name, - const char **parent_names, int num_parents, + const char * const *parent_names, int num_parents, struct clk_hw *mux_hw, const struct clk_ops *mux_ops, struct clk_hw *rate_hw, const struct clk_ops *rate_ops, struct clk_hw *gate_hw, const struct clk_ops *gate_ops, -- cgit v1.2.3 From a8aede7948438f3a9c830a5a865ae6a78c5fc4ca Mon Sep 17 00:00:00 2001 From: James Liao Date: Thu, 23 Apr 2015 10:35:41 +0200 Subject: clk: mediatek: Add basic clocks for Mediatek MT8135. This patch adds basic clocks for MT8135, including TOPCKGEN, PLLs, INFRA and PERI clocks. Signed-off-by: James Liao Signed-off-by: Henry Chen Signed-off-by: Sascha Hauer Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-mt8135.c | 644 +++++++++++++++++++++ include/dt-bindings/clock/mt8135-clk.h | 194 +++++++ .../dt-bindings/reset-controller/mt8135-resets.h | 64 ++ 4 files changed, 903 insertions(+) create mode 100644 drivers/clk/mediatek/clk-mt8135.c create mode 100644 include/dt-bindings/clock/mt8135-clk.h create mode 100644 include/dt-bindings/reset-controller/mt8135-resets.h (limited to 'include') diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile index 0b6f1c3c9c69..12ce576e628a 100644 --- a/drivers/clk/mediatek/Makefile +++ b/drivers/clk/mediatek/Makefile @@ -1,2 +1,3 @@ obj-y += clk-mtk.o clk-pll.o clk-gate.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o +obj-y += clk-mt8135.o diff --git a/drivers/clk/mediatek/clk-mt8135.c b/drivers/clk/mediatek/clk-mt8135.c new file mode 100644 index 000000000000..a63435b95822 --- /dev/null +++ b/drivers/clk/mediatek/clk-mt8135.c @@ -0,0 +1,644 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: James Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include "clk-mtk.h" +#include "clk-gate.h" + +static DEFINE_SPINLOCK(mt8135_clk_lock); + +static const struct mtk_fixed_factor root_clk_alias[] __initconst = { + FACTOR(CLK_TOP_DSI0_LNTC_DSICLK, "dsi0_lntc_dsiclk", "clk_null", 1, 1), + FACTOR(CLK_TOP_HDMITX_CLKDIG_CTS, "hdmitx_clkdig_cts", "clk_null", 1, 1), + FACTOR(CLK_TOP_CLKPH_MCK, "clkph_mck", "clk_null", 1, 1), + FACTOR(CLK_TOP_CPUM_TCK_IN, "cpum_tck_in", "clk_null", 1, 1), +}; + +static const struct mtk_fixed_factor top_divs[] __initconst = { + FACTOR(CLK_TOP_MAINPLL_806M, "mainpll_806m", "mainpll", 1, 2), + FACTOR(CLK_TOP_MAINPLL_537P3M, "mainpll_537p3m", "mainpll", 1, 3), + FACTOR(CLK_TOP_MAINPLL_322P4M, "mainpll_322p4m", "mainpll", 1, 5), + FACTOR(CLK_TOP_MAINPLL_230P3M, "mainpll_230p3m", "mainpll", 1, 7), + + FACTOR(CLK_TOP_UNIVPLL_624M, "univpll_624m", "univpll", 1, 2), + FACTOR(CLK_TOP_UNIVPLL_416M, "univpll_416m", "univpll", 1, 3), + FACTOR(CLK_TOP_UNIVPLL_249P6M, "univpll_249p6m", "univpll", 1, 5), + FACTOR(CLK_TOP_UNIVPLL_178P3M, "univpll_178p3m", "univpll", 1, 7), + FACTOR(CLK_TOP_UNIVPLL_48M, "univpll_48m", "univpll", 1, 26), + + FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2), + FACTOR(CLK_TOP_MMPLL_D3, "mmpll_d3", "mmpll", 1, 3), + FACTOR(CLK_TOP_MMPLL_D5, "mmpll_d5", "mmpll", 1, 5), + FACTOR(CLK_TOP_MMPLL_D7, "mmpll_d7", "mmpll", 1, 7), + FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", "mmpll_d2", 1, 2), + FACTOR(CLK_TOP_MMPLL_D6, "mmpll_d6", "mmpll_d3", 1, 2), + + FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll_806m", 1, 1), + FACTOR(CLK_TOP_SYSPLL_D4, "syspll_d4", "mainpll_806m", 1, 2), + FACTOR(CLK_TOP_SYSPLL_D6, "syspll_d6", "mainpll_806m", 1, 3), + FACTOR(CLK_TOP_SYSPLL_D8, "syspll_d8", "mainpll_806m", 1, 4), + FACTOR(CLK_TOP_SYSPLL_D10, "syspll_d10", "mainpll_806m", 1, 5), + FACTOR(CLK_TOP_SYSPLL_D12, "syspll_d12", "mainpll_806m", 1, 6), + FACTOR(CLK_TOP_SYSPLL_D16, "syspll_d16", "mainpll_806m", 1, 8), + FACTOR(CLK_TOP_SYSPLL_D24, "syspll_d24", "mainpll_806m", 1, 12), + + FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "mainpll_537p3m", 1, 1), + + FACTOR(CLK_TOP_SYSPLL_D2P5, "syspll_d2p5", "mainpll_322p4m", 2, 1), + FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll_322p4m", 1, 1), + + FACTOR(CLK_TOP_SYSPLL_D3P5, "syspll_d3p5", "mainpll_230p3m", 2, 1), + + FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_624m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_624m", 1, 4), + FACTOR(CLK_TOP_UNIVPLL1_D6, "univpll1_d6", "univpll_624m", 1, 6), + FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_624m", 1, 8), + FACTOR(CLK_TOP_UNIVPLL1_D10, "univpll1_d10", "univpll_624m", 1, 10), + + FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_416m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_416m", 1, 4), + FACTOR(CLK_TOP_UNIVPLL2_D6, "univpll2_d6", "univpll_416m", 1, 6), + FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_416m", 1, 8), + + FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll_416m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll_249p6m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll_178p3m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D10, "univpll_d10", "univpll_249p6m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univpll_48m", 1, 1), + + FACTOR(CLK_TOP_APLL, "apll_ck", "audpll", 1, 1), + FACTOR(CLK_TOP_APLL_D4, "apll_d4", "audpll", 1, 4), + FACTOR(CLK_TOP_APLL_D8, "apll_d8", "audpll", 1, 8), + FACTOR(CLK_TOP_APLL_D16, "apll_d16", "audpll", 1, 16), + FACTOR(CLK_TOP_APLL_D24, "apll_d24", "audpll", 1, 24), + + FACTOR(CLK_TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2), + FACTOR(CLK_TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4), + FACTOR(CLK_TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8), + + FACTOR(CLK_TOP_LVDSTX_CLKDIG_CT, "lvdstx_clkdig_cts", "lvdspll", 1, 1), + FACTOR(CLK_TOP_VPLL_DPIX, "vpll_dpix_ck", "lvdspll", 1, 1), + + FACTOR(CLK_TOP_TVHDMI_H, "tvhdmi_h_ck", "tvdpll", 1, 1), + + FACTOR(CLK_TOP_HDMITX_CLKDIG_D2, "hdmitx_clkdig_d2", "hdmitx_clkdig_cts", 1, 2), + FACTOR(CLK_TOP_HDMITX_CLKDIG_D3, "hdmitx_clkdig_d3", "hdmitx_clkdig_cts", 1, 3), + + FACTOR(CLK_TOP_TVHDMI_D2, "tvhdmi_d2", "tvhdmi_h_ck", 1, 2), + FACTOR(CLK_TOP_TVHDMI_D4, "tvhdmi_d4", "tvhdmi_h_ck", 1, 4), + + FACTOR(CLK_TOP_MEMPLL_MCK_D4, "mempll_mck_d4", "clkph_mck", 1, 4), +}; + +static const char * const axi_parents[] __initconst = { + "clk26m", + "syspll_d3", + "syspll_d4", + "syspll_d6", + "univpll_d5", + "univpll2_d2", + "syspll_d3p5" +}; + +static const char * const smi_parents[] __initconst = { + "clk26m", + "clkph_mck", + "syspll_d2p5", + "syspll_d3", + "syspll_d8", + "univpll_d5", + "univpll1_d2", + "univpll1_d6", + "mmpll_d3", + "mmpll_d4", + "mmpll_d5", + "mmpll_d6", + "mmpll_d7", + "vdecpll", + "lvdspll" +}; + +static const char * const mfg_parents[] __initconst = { + "clk26m", + "univpll1_d4", + "syspll_d2", + "syspll_d2p5", + "syspll_d3", + "univpll_d5", + "univpll1_d2", + "mmpll_d2", + "mmpll_d3", + "mmpll_d4", + "mmpll_d5", + "mmpll_d6", + "mmpll_d7" +}; + +static const char * const irda_parents[] __initconst = { + "clk26m", + "univpll2_d8", + "univpll1_d6" +}; + +static const char * const cam_parents[] __initconst = { + "clk26m", + "syspll_d3", + "syspll_d3p5", + "syspll_d4", + "univpll_d5", + "univpll2_d2", + "univpll_d7", + "univpll1_d4" +}; + +static const char * const aud_intbus_parents[] __initconst = { + "clk26m", + "syspll_d6", + "univpll_d10" +}; + +static const char * const jpg_parents[] __initconst = { + "clk26m", + "syspll_d5", + "syspll_d4", + "syspll_d3", + "univpll_d7", + "univpll2_d2", + "univpll_d5" +}; + +static const char * const disp_parents[] __initconst = { + "clk26m", + "syspll_d3p5", + "syspll_d3", + "univpll2_d2", + "univpll_d5", + "univpll1_d2", + "lvdspll", + "vdecpll" +}; + +static const char * const msdc30_parents[] __initconst = { + "clk26m", + "syspll_d6", + "syspll_d5", + "univpll1_d4", + "univpll2_d4", + "msdcpll" +}; + +static const char * const usb20_parents[] __initconst = { + "clk26m", + "univpll2_d6", + "univpll1_d10" +}; + +static const char * const venc_parents[] __initconst = { + "clk26m", + "syspll_d3", + "syspll_d8", + "univpll_d5", + "univpll1_d6", + "mmpll_d4", + "mmpll_d5", + "mmpll_d6" +}; + +static const char * const spi_parents[] __initconst = { + "clk26m", + "syspll_d6", + "syspll_d8", + "syspll_d10", + "univpll1_d6", + "univpll1_d8" +}; + +static const char * const uart_parents[] __initconst = { + "clk26m", + "univpll2_d8" +}; + +static const char * const mem_parents[] __initconst = { + "clk26m", + "clkph_mck" +}; + +static const char * const camtg_parents[] __initconst = { + "clk26m", + "univpll_d26", + "univpll1_d6", + "syspll_d16", + "syspll_d8" +}; + +static const char * const audio_parents[] __initconst = { + "clk26m", + "syspll_d24" +}; + +static const char * const fix_parents[] __initconst = { + "rtc32k", + "clk26m", + "univpll_d5", + "univpll_d7", + "univpll1_d2", + "univpll1_d4", + "univpll1_d6", + "univpll1_d8" +}; + +static const char * const vdec_parents[] __initconst = { + "clk26m", + "vdecpll", + "clkph_mck", + "syspll_d2p5", + "syspll_d3", + "syspll_d3p5", + "syspll_d4", + "syspll_d5", + "syspll_d6", + "syspll_d8", + "univpll1_d2", + "univpll2_d2", + "univpll_d7", + "univpll_d10", + "univpll2_d4", + "lvdspll" +}; + +static const char * const ddrphycfg_parents[] __initconst = { + "clk26m", + "axi_sel", + "syspll_d12" +}; + +static const char * const dpilvds_parents[] __initconst = { + "clk26m", + "lvdspll", + "lvdspll_d2", + "lvdspll_d4", + "lvdspll_d8" +}; + +static const char * const pmicspi_parents[] __initconst = { + "clk26m", + "univpll2_d6", + "syspll_d8", + "syspll_d10", + "univpll1_d10", + "mempll_mck_d4", + "univpll_d26", + "syspll_d24" +}; + +static const char * const smi_mfg_as_parents[] __initconst = { + "clk26m", + "smi_sel", + "mfg_sel", + "mem_sel" +}; + +static const char * const gcpu_parents[] __initconst = { + "clk26m", + "syspll_d4", + "univpll_d7", + "syspll_d5", + "syspll_d6" +}; + +static const char * const dpi1_parents[] __initconst = { + "clk26m", + "tvhdmi_h_ck", + "tvhdmi_d2", + "tvhdmi_d4" +}; + +static const char * const cci_parents[] __initconst = { + "clk26m", + "mainpll_537p3m", + "univpll_d3", + "syspll_d2p5", + "syspll_d3", + "syspll_d5" +}; + +static const char * const apll_parents[] __initconst = { + "clk26m", + "apll_ck", + "apll_d4", + "apll_d8", + "apll_d16", + "apll_d24" +}; + +static const char * const hdmipll_parents[] __initconst = { + "clk26m", + "hdmitx_clkdig_cts", + "hdmitx_clkdig_d2", + "hdmitx_clkdig_d3" +}; + +static const struct mtk_composite top_muxes[] __initconst = { + /* CLK_CFG_0 */ + MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, + 0x0140, 0, 3, INVALID_MUX_GATE_BIT), + MUX_GATE(CLK_TOP_SMI_SEL, "smi_sel", smi_parents, 0x0140, 8, 4, 15), + MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0140, 16, 4, 23), + MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x0140, 24, 2, 31), + /* CLK_CFG_1 */ + MUX_GATE(CLK_TOP_CAM_SEL, "cam_sel", cam_parents, 0x0144, 0, 3, 7), + MUX_GATE(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, + 0x0144, 8, 2, 15), + MUX_GATE(CLK_TOP_JPG_SEL, "jpg_sel", jpg_parents, 0x0144, 16, 3, 23), + MUX_GATE(CLK_TOP_DISP_SEL, "disp_sel", disp_parents, 0x0144, 24, 3, 31), + /* CLK_CFG_2 */ + MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents, 0x0148, 0, 3, 7), + MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents, 0x0148, 8, 3, 15), + MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents, 0x0148, 16, 3, 23), + MUX_GATE(CLK_TOP_MSDC30_4_SEL, "msdc30_4_sel", msdc30_parents, 0x0148, 24, 3, 31), + /* CLK_CFG_3 */ + MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x014c, 0, 2, 7), + /* CLK_CFG_4 */ + MUX_GATE(CLK_TOP_VENC_SEL, "venc_sel", venc_parents, 0x0150, 8, 3, 15), + MUX_GATE(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x0150, 16, 3, 23), + MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x0150, 24, 2, 31), + /* CLK_CFG_6 */ + MUX_GATE(CLK_TOP_MEM_SEL, "mem_sel", mem_parents, 0x0158, 0, 2, 7), + MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0158, 8, 3, 15), + MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0158, 24, 2, 31), + /* CLK_CFG_7 */ + MUX_GATE(CLK_TOP_FIX_SEL, "fix_sel", fix_parents, 0x015c, 0, 3, 7), + MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x015c, 8, 4, 15), + MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, + 0x015c, 16, 2, 23), + MUX_GATE(CLK_TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x015c, 24, 3, 31), + /* CLK_CFG_8 */ + MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0164, 0, 3, 7), + MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents, 0x0164, 8, 3, 15), + MUX_GATE(CLK_TOP_SMI_MFG_AS_SEL, "smi_mfg_as_sel", smi_mfg_as_parents, + 0x0164, 16, 2, 23), + MUX_GATE(CLK_TOP_GCPU_SEL, "gcpu_sel", gcpu_parents, 0x0164, 24, 3, 31), + /* CLK_CFG_9 */ + MUX_GATE(CLK_TOP_DPI1_SEL, "dpi1_sel", dpi1_parents, 0x0168, 0, 2, 7), + MUX_GATE(CLK_TOP_CCI_SEL, "cci_sel", cci_parents, 0x0168, 8, 3, 15), + MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel", apll_parents, 0x0168, 16, 3, 23), + MUX_GATE(CLK_TOP_HDMIPLL_SEL, "hdmipll_sel", hdmipll_parents, 0x0168, 24, 2, 31), +}; + +static const struct mtk_gate_regs infra_cg_regs = { + .set_ofs = 0x0040, + .clr_ofs = 0x0044, + .sta_ofs = 0x0048, +}; + +#define GATE_ICG(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &infra_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate infra_clks[] __initconst = { + GATE_ICG(CLK_INFRA_PMIC_WRAP, "pmic_wrap_ck", "axi_sel", 23), + GATE_ICG(CLK_INFRA_PMICSPI, "pmicspi_ck", "pmicspi_sel", 22), + GATE_ICG(CLK_INFRA_CCIF1_AP_CTRL, "ccif1_ap_ctrl", "axi_sel", 21), + GATE_ICG(CLK_INFRA_CCIF0_AP_CTRL, "ccif0_ap_ctrl", "axi_sel", 20), + GATE_ICG(CLK_INFRA_KP, "kp_ck", "axi_sel", 16), + GATE_ICG(CLK_INFRA_CPUM, "cpum_ck", "cpum_tck_in", 15), + GATE_ICG(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8), + GATE_ICG(CLK_INFRA_MFGAXI, "mfgaxi_ck", "axi_sel", 7), + GATE_ICG(CLK_INFRA_DEVAPC, "devapc_ck", "axi_sel", 6), + GATE_ICG(CLK_INFRA_AUDIO, "audio_ck", "aud_intbus_sel", 5), + GATE_ICG(CLK_INFRA_MFG_BUS, "mfg_bus_ck", "axi_sel", 2), + GATE_ICG(CLK_INFRA_SMI, "smi_ck", "smi_sel", 1), + GATE_ICG(CLK_INFRA_DBGCLK, "dbgclk_ck", "axi_sel", 0), +}; + +static const struct mtk_gate_regs peri0_cg_regs = { + .set_ofs = 0x0008, + .clr_ofs = 0x0010, + .sta_ofs = 0x0018, +}; + +static const struct mtk_gate_regs peri1_cg_regs = { + .set_ofs = 0x000c, + .clr_ofs = 0x0014, + .sta_ofs = 0x001c, +}; + +#define GATE_PERI0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +#define GATE_PERI1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate peri_gates[] __initconst = { + /* PERI0 */ + GATE_PERI0(CLK_PERI_I2C5, "i2c5_ck", "axi_sel", 31), + GATE_PERI0(CLK_PERI_I2C4, "i2c4_ck", "axi_sel", 30), + GATE_PERI0(CLK_PERI_I2C3, "i2c3_ck", "axi_sel", 29), + GATE_PERI0(CLK_PERI_I2C2, "i2c2_ck", "axi_sel", 28), + GATE_PERI0(CLK_PERI_I2C1, "i2c1_ck", "axi_sel", 27), + GATE_PERI0(CLK_PERI_I2C0, "i2c0_ck", "axi_sel", 26), + GATE_PERI0(CLK_PERI_UART3, "uart3_ck", "axi_sel", 25), + GATE_PERI0(CLK_PERI_UART2, "uart2_ck", "axi_sel", 24), + GATE_PERI0(CLK_PERI_UART1, "uart1_ck", "axi_sel", 23), + GATE_PERI0(CLK_PERI_UART0, "uart0_ck", "axi_sel", 22), + GATE_PERI0(CLK_PERI_IRDA, "irda_ck", "irda_sel", 21), + GATE_PERI0(CLK_PERI_NLI, "nli_ck", "axi_sel", 20), + GATE_PERI0(CLK_PERI_MD_HIF, "md_hif_ck", "axi_sel", 19), + GATE_PERI0(CLK_PERI_AP_HIF, "ap_hif_ck", "axi_sel", 18), + GATE_PERI0(CLK_PERI_MSDC30_3, "msdc30_3_ck", "msdc30_4_sel", 17), + GATE_PERI0(CLK_PERI_MSDC30_2, "msdc30_2_ck", "msdc30_3_sel", 16), + GATE_PERI0(CLK_PERI_MSDC30_1, "msdc30_1_ck", "msdc30_2_sel", 15), + GATE_PERI0(CLK_PERI_MSDC20_2, "msdc20_2_ck", "msdc30_1_sel", 14), + GATE_PERI0(CLK_PERI_MSDC20_1, "msdc20_1_ck", "msdc30_0_sel", 13), + GATE_PERI0(CLK_PERI_AP_DMA, "ap_dma_ck", "axi_sel", 12), + GATE_PERI0(CLK_PERI_USB1, "usb1_ck", "usb20_sel", 11), + GATE_PERI0(CLK_PERI_USB0, "usb0_ck", "usb20_sel", 10), + GATE_PERI0(CLK_PERI_PWM, "pwm_ck", "axi_sel", 9), + GATE_PERI0(CLK_PERI_PWM7, "pwm7_ck", "axi_sel", 8), + GATE_PERI0(CLK_PERI_PWM6, "pwm6_ck", "axi_sel", 7), + GATE_PERI0(CLK_PERI_PWM5, "pwm5_ck", "axi_sel", 6), + GATE_PERI0(CLK_PERI_PWM4, "pwm4_ck", "axi_sel", 5), + GATE_PERI0(CLK_PERI_PWM3, "pwm3_ck", "axi_sel", 4), + GATE_PERI0(CLK_PERI_PWM2, "pwm2_ck", "axi_sel", 3), + GATE_PERI0(CLK_PERI_PWM1, "pwm1_ck", "axi_sel", 2), + GATE_PERI0(CLK_PERI_THERM, "therm_ck", "axi_sel", 1), + GATE_PERI0(CLK_PERI_NFI, "nfi_ck", "axi_sel", 0), + /* PERI1 */ + GATE_PERI1(CLK_PERI_USBSLV, "usbslv_ck", "axi_sel", 8), + GATE_PERI1(CLK_PERI_USB1_MCU, "usb1_mcu_ck", "axi_sel", 7), + GATE_PERI1(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 6), + GATE_PERI1(CLK_PERI_GCPU, "gcpu_ck", "gcpu_sel", 5), + GATE_PERI1(CLK_PERI_FHCTL, "fhctl_ck", "clk26m", 4), + GATE_PERI1(CLK_PERI_SPI1, "spi1_ck", "spi_sel", 3), + GATE_PERI1(CLK_PERI_AUXADC, "auxadc_ck", "clk26m", 2), + GATE_PERI1(CLK_PERI_PERI_PWRAP, "peri_pwrap_ck", "axi_sel", 1), + GATE_PERI1(CLK_PERI_I2C6, "i2c6_ck", "axi_sel", 0), +}; + +static const char * const uart_ck_sel_parents[] __initconst = { + "clk26m", + "uart_sel", +}; + +static const struct mtk_composite peri_clks[] __initconst = { + MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents, 0x40c, 0, 1), + MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents, 0x40c, 1, 1), + MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents, 0x40c, 2, 1), + MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1), +}; + +static void __init mtk_topckgen_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + void __iomem *base; + int r; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK); + + mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data); + mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data); + mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base, + &mt8135_clk_lock, clk_data); + + clk_prepare_enable(clk_data->clks[CLK_TOP_CCI_SEL]); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8135-topckgen", mtk_topckgen_init); + +static void __init mtk_infrasys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK); + + mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), + clk_data); + + clk_prepare_enable(clk_data->clks[CLK_INFRA_M4U]); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); + + mtk_register_reset_controller(node, 2, 0x30); +} +CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8135-infracfg", mtk_infrasys_init); + +static void __init mtk_pericfg_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + void __iomem *base; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK); + + mtk_clk_register_gates(node, peri_gates, ARRAY_SIZE(peri_gates), + clk_data); + mtk_clk_register_composites(peri_clks, ARRAY_SIZE(peri_clks), base, + &mt8135_clk_lock, clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); + + mtk_register_reset_controller(node, 2, 0); +} +CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8135-pericfg", mtk_pericfg_init); + +#define MT8135_PLL_FMAX (2000 * MHZ) +#define CON0_MT8135_RST_BAR BIT(27) + +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \ + .id = _id, \ + .name = _name, \ + .reg = _reg, \ + .pwr_reg = _pwr_reg, \ + .en_mask = _en_mask, \ + .flags = _flags, \ + .rst_bar_mask = CON0_MT8135_RST_BAR, \ + .fmax = MT8135_PLL_FMAX, \ + .pcwbits = _pcwbits, \ + .pd_reg = _pd_reg, \ + .pd_shift = _pd_shift, \ + .tuner_reg = _tuner_reg, \ + .pcw_reg = _pcw_reg, \ + .pcw_shift = _pcw_shift, \ + } + +static const struct mtk_pll_data plls[] = { + PLL(CLK_APMIXED_ARMPLL1, "armpll1", 0x200, 0x218, 0x80000001, 0, 21, 0x204, 24, 0x0, 0x204, 0), + PLL(CLK_APMIXED_ARMPLL2, "armpll2", 0x2cc, 0x2e4, 0x80000001, 0, 21, 0x2d0, 24, 0x0, 0x2d0, 0), + PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x21c, 0x234, 0xf0000001, HAVE_RST_BAR, 21, 0x21c, 6, 0x0, 0x220, 0), + PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x238, 0x250, 0xf3000001, HAVE_RST_BAR, 7, 0x238, 6, 0x0, 0x238, 9), + PLL(CLK_APMIXED_MMPLL, "mmpll", 0x254, 0x26c, 0xf0000001, HAVE_RST_BAR, 21, 0x254, 6, 0x0, 0x258, 0), + PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x278, 0x290, 0x80000001, 0, 21, 0x278, 6, 0x0, 0x27c, 0), + PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x294, 0x2ac, 0x80000001, 0, 31, 0x294, 6, 0x0, 0x298, 0), + PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x2b0, 0x2c8, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x2b4, 0), + PLL(CLK_APMIXED_AUDPLL, "audpll", 0x2e8, 0x300, 0x80000001, 0, 31, 0x2e8, 6, 0x2f8, 0x2ec, 0), + PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x304, 0x31c, 0x80000001, 0, 21, 0x2b0, 6, 0x0, 0x308, 0), +}; + +static void __init mtk_apmixedsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + + clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls)); + if (!clk_data) + return; + + mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data); +} +CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8135-apmixedsys", + mtk_apmixedsys_init); diff --git a/include/dt-bindings/clock/mt8135-clk.h b/include/dt-bindings/clock/mt8135-clk.h new file mode 100644 index 000000000000..6dac6c091dd2 --- /dev/null +++ b/include/dt-bindings/clock/mt8135-clk.h @@ -0,0 +1,194 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: James Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MT8135_H +#define _DT_BINDINGS_CLK_MT8135_H + +/* TOPCKGEN */ + +#define CLK_TOP_DSI0_LNTC_DSICLK 1 +#define CLK_TOP_HDMITX_CLKDIG_CTS 2 +#define CLK_TOP_CLKPH_MCK 3 +#define CLK_TOP_CPUM_TCK_IN 4 +#define CLK_TOP_MAINPLL_806M 5 +#define CLK_TOP_MAINPLL_537P3M 6 +#define CLK_TOP_MAINPLL_322P4M 7 +#define CLK_TOP_MAINPLL_230P3M 8 +#define CLK_TOP_UNIVPLL_624M 9 +#define CLK_TOP_UNIVPLL_416M 10 +#define CLK_TOP_UNIVPLL_249P6M 11 +#define CLK_TOP_UNIVPLL_178P3M 12 +#define CLK_TOP_UNIVPLL_48M 13 +#define CLK_TOP_MMPLL_D2 14 +#define CLK_TOP_MMPLL_D3 15 +#define CLK_TOP_MMPLL_D5 16 +#define CLK_TOP_MMPLL_D7 17 +#define CLK_TOP_MMPLL_D4 18 +#define CLK_TOP_MMPLL_D6 19 +#define CLK_TOP_SYSPLL_D2 20 +#define CLK_TOP_SYSPLL_D4 21 +#define CLK_TOP_SYSPLL_D6 22 +#define CLK_TOP_SYSPLL_D8 23 +#define CLK_TOP_SYSPLL_D10 24 +#define CLK_TOP_SYSPLL_D12 25 +#define CLK_TOP_SYSPLL_D16 26 +#define CLK_TOP_SYSPLL_D24 27 +#define CLK_TOP_SYSPLL_D3 28 +#define CLK_TOP_SYSPLL_D2P5 29 +#define CLK_TOP_SYSPLL_D5 30 +#define CLK_TOP_SYSPLL_D3P5 31 +#define CLK_TOP_UNIVPLL1_D2 32 +#define CLK_TOP_UNIVPLL1_D4 33 +#define CLK_TOP_UNIVPLL1_D6 34 +#define CLK_TOP_UNIVPLL1_D8 35 +#define CLK_TOP_UNIVPLL1_D10 36 +#define CLK_TOP_UNIVPLL2_D2 37 +#define CLK_TOP_UNIVPLL2_D4 38 +#define CLK_TOP_UNIVPLL2_D6 39 +#define CLK_TOP_UNIVPLL2_D8 40 +#define CLK_TOP_UNIVPLL_D3 41 +#define CLK_TOP_UNIVPLL_D5 42 +#define CLK_TOP_UNIVPLL_D7 43 +#define CLK_TOP_UNIVPLL_D10 44 +#define CLK_TOP_UNIVPLL_D26 45 +#define CLK_TOP_APLL 46 +#define CLK_TOP_APLL_D4 47 +#define CLK_TOP_APLL_D8 48 +#define CLK_TOP_APLL_D16 49 +#define CLK_TOP_APLL_D24 50 +#define CLK_TOP_LVDSPLL_D2 51 +#define CLK_TOP_LVDSPLL_D4 52 +#define CLK_TOP_LVDSPLL_D8 53 +#define CLK_TOP_LVDSTX_CLKDIG_CT 54 +#define CLK_TOP_VPLL_DPIX 55 +#define CLK_TOP_TVHDMI_H 56 +#define CLK_TOP_HDMITX_CLKDIG_D2 57 +#define CLK_TOP_HDMITX_CLKDIG_D3 58 +#define CLK_TOP_TVHDMI_D2 59 +#define CLK_TOP_TVHDMI_D4 60 +#define CLK_TOP_MEMPLL_MCK_D4 61 +#define CLK_TOP_AXI_SEL 62 +#define CLK_TOP_SMI_SEL 63 +#define CLK_TOP_MFG_SEL 64 +#define CLK_TOP_IRDA_SEL 65 +#define CLK_TOP_CAM_SEL 66 +#define CLK_TOP_AUD_INTBUS_SEL 67 +#define CLK_TOP_JPG_SEL 68 +#define CLK_TOP_DISP_SEL 69 +#define CLK_TOP_MSDC30_1_SEL 70 +#define CLK_TOP_MSDC30_2_SEL 71 +#define CLK_TOP_MSDC30_3_SEL 72 +#define CLK_TOP_MSDC30_4_SEL 73 +#define CLK_TOP_USB20_SEL 74 +#define CLK_TOP_VENC_SEL 75 +#define CLK_TOP_SPI_SEL 76 +#define CLK_TOP_UART_SEL 77 +#define CLK_TOP_MEM_SEL 78 +#define CLK_TOP_CAMTG_SEL 79 +#define CLK_TOP_AUDIO_SEL 80 +#define CLK_TOP_FIX_SEL 81 +#define CLK_TOP_VDEC_SEL 82 +#define CLK_TOP_DDRPHYCFG_SEL 83 +#define CLK_TOP_DPILVDS_SEL 84 +#define CLK_TOP_PMICSPI_SEL 85 +#define CLK_TOP_MSDC30_0_SEL 86 +#define CLK_TOP_SMI_MFG_AS_SEL 87 +#define CLK_TOP_GCPU_SEL 88 +#define CLK_TOP_DPI1_SEL 89 +#define CLK_TOP_CCI_SEL 90 +#define CLK_TOP_APLL_SEL 91 +#define CLK_TOP_HDMIPLL_SEL 92 +#define CLK_TOP_NR_CLK 93 + +/* APMIXED_SYS */ + +#define CLK_APMIXED_ARMPLL1 1 +#define CLK_APMIXED_ARMPLL2 2 +#define CLK_APMIXED_MAINPLL 3 +#define CLK_APMIXED_UNIVPLL 4 +#define CLK_APMIXED_MMPLL 5 +#define CLK_APMIXED_MSDCPLL 6 +#define CLK_APMIXED_TVDPLL 7 +#define CLK_APMIXED_LVDSPLL 8 +#define CLK_APMIXED_AUDPLL 9 +#define CLK_APMIXED_VDECPLL 10 +#define CLK_APMIXED_NR_CLK 11 + +/* INFRA_SYS */ + +#define CLK_INFRA_PMIC_WRAP 1 +#define CLK_INFRA_PMICSPI 2 +#define CLK_INFRA_CCIF1_AP_CTRL 3 +#define CLK_INFRA_CCIF0_AP_CTRL 4 +#define CLK_INFRA_KP 5 +#define CLK_INFRA_CPUM 6 +#define CLK_INFRA_M4U 7 +#define CLK_INFRA_MFGAXI 8 +#define CLK_INFRA_DEVAPC 9 +#define CLK_INFRA_AUDIO 10 +#define CLK_INFRA_MFG_BUS 11 +#define CLK_INFRA_SMI 12 +#define CLK_INFRA_DBGCLK 13 +#define CLK_INFRA_NR_CLK 14 + +/* PERI_SYS */ + +#define CLK_PERI_I2C5 1 +#define CLK_PERI_I2C4 2 +#define CLK_PERI_I2C3 3 +#define CLK_PERI_I2C2 4 +#define CLK_PERI_I2C1 5 +#define CLK_PERI_I2C0 6 +#define CLK_PERI_UART3 7 +#define CLK_PERI_UART2 8 +#define CLK_PERI_UART1 9 +#define CLK_PERI_UART0 10 +#define CLK_PERI_IRDA 11 +#define CLK_PERI_NLI 12 +#define CLK_PERI_MD_HIF 13 +#define CLK_PERI_AP_HIF 14 +#define CLK_PERI_MSDC30_3 15 +#define CLK_PERI_MSDC30_2 16 +#define CLK_PERI_MSDC30_1 17 +#define CLK_PERI_MSDC20_2 18 +#define CLK_PERI_MSDC20_1 19 +#define CLK_PERI_AP_DMA 20 +#define CLK_PERI_USB1 21 +#define CLK_PERI_USB0 22 +#define CLK_PERI_PWM 23 +#define CLK_PERI_PWM7 24 +#define CLK_PERI_PWM6 25 +#define CLK_PERI_PWM5 26 +#define CLK_PERI_PWM4 27 +#define CLK_PERI_PWM3 28 +#define CLK_PERI_PWM2 29 +#define CLK_PERI_PWM1 30 +#define CLK_PERI_THERM 31 +#define CLK_PERI_NFI 32 +#define CLK_PERI_USBSLV 33 +#define CLK_PERI_USB1_MCU 34 +#define CLK_PERI_USB0_MCU 35 +#define CLK_PERI_GCPU 36 +#define CLK_PERI_FHCTL 37 +#define CLK_PERI_SPI1 38 +#define CLK_PERI_AUXADC 39 +#define CLK_PERI_PERI_PWRAP 40 +#define CLK_PERI_I2C6 41 +#define CLK_PERI_UART0_SEL 42 +#define CLK_PERI_UART1_SEL 43 +#define CLK_PERI_UART2_SEL 44 +#define CLK_PERI_UART3_SEL 45 +#define CLK_PERI_NR_CLK 46 + +#endif /* _DT_BINDINGS_CLK_MT8135_H */ diff --git a/include/dt-bindings/reset-controller/mt8135-resets.h b/include/dt-bindings/reset-controller/mt8135-resets.h new file mode 100644 index 000000000000..1fb629508db2 --- /dev/null +++ b/include/dt-bindings/reset-controller/mt8135-resets.h @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu, MediaTek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8135 +#define _DT_BINDINGS_RESET_CONTROLLER_MT8135 + +/* INFRACFG resets */ +#define MT8135_INFRA_EMI_REG_RST 0 +#define MT8135_INFRA_DRAMC0_A0_RST 1 +#define MT8135_INFRA_CCIF0_RST 2 +#define MT8135_INFRA_APCIRQ_EINT_RST 3 +#define MT8135_INFRA_APXGPT_RST 4 +#define MT8135_INFRA_SCPSYS_RST 5 +#define MT8135_INFRA_CCIF1_RST 6 +#define MT8135_INFRA_PMIC_WRAP_RST 7 +#define MT8135_INFRA_KP_RST 8 +#define MT8135_INFRA_EMI_RST 32 +#define MT8135_INFRA_DRAMC0_RST 34 +#define MT8135_INFRA_SMI_RST 35 +#define MT8135_INFRA_M4U_RST 36 + +/* PERICFG resets */ +#define MT8135_PERI_UART0_SW_RST 0 +#define MT8135_PERI_UART1_SW_RST 1 +#define MT8135_PERI_UART2_SW_RST 2 +#define MT8135_PERI_UART3_SW_RST 3 +#define MT8135_PERI_IRDA_SW_RST 4 +#define MT8135_PERI_PTP_SW_RST 5 +#define MT8135_PERI_AP_HIF_SW_RST 6 +#define MT8135_PERI_GPCU_SW_RST 7 +#define MT8135_PERI_MD_HIF_SW_RST 8 +#define MT8135_PERI_NLI_SW_RST 9 +#define MT8135_PERI_AUXADC_SW_RST 10 +#define MT8135_PERI_DMA_SW_RST 11 +#define MT8135_PERI_NFI_SW_RST 14 +#define MT8135_PERI_PWM_SW_RST 15 +#define MT8135_PERI_THERM_SW_RST 16 +#define MT8135_PERI_MSDC0_SW_RST 17 +#define MT8135_PERI_MSDC1_SW_RST 18 +#define MT8135_PERI_MSDC2_SW_RST 19 +#define MT8135_PERI_MSDC3_SW_RST 20 +#define MT8135_PERI_I2C0_SW_RST 22 +#define MT8135_PERI_I2C1_SW_RST 23 +#define MT8135_PERI_I2C2_SW_RST 24 +#define MT8135_PERI_I2C3_SW_RST 25 +#define MT8135_PERI_I2C4_SW_RST 26 +#define MT8135_PERI_I2C5_SW_RST 27 +#define MT8135_PERI_I2C6_SW_RST 28 +#define MT8135_PERI_USB_SW_RST 29 +#define MT8135_PERI_SPI1_SW_RST 33 +#define MT8135_PERI_PWRAP_BRIDGE_SW_RST 34 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8135 */ -- cgit v1.2.3 From c1e81a3bef36cb046c079480948fa3e0eca590d6 Mon Sep 17 00:00:00 2001 From: James Liao Date: Thu, 23 Apr 2015 10:35:42 +0200 Subject: clk: mediatek: Add basic clocks for Mediatek MT8173. This patch adds basic clocks for MT8173, including TOPCKGEN, PLLs, INFRA and PERI clocks. Signed-off-by: James Liao Signed-off-by: Henry Chen Signed-off-by: Sascha Hauer Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/Makefile | 1 + drivers/clk/mediatek/clk-mt8173.c | 830 +++++++++++++++++++++ include/dt-bindings/clock/mt8173-clk.h | 235 ++++++ .../dt-bindings/reset-controller/mt8173-resets.h | 63 ++ 4 files changed, 1129 insertions(+) create mode 100644 drivers/clk/mediatek/clk-mt8173.c create mode 100644 include/dt-bindings/clock/mt8173-clk.h create mode 100644 include/dt-bindings/reset-controller/mt8173-resets.h (limited to 'include') diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile index 12ce576e628a..8e4b2a4635b9 100644 --- a/drivers/clk/mediatek/Makefile +++ b/drivers/clk/mediatek/Makefile @@ -1,3 +1,4 @@ obj-y += clk-mtk.o clk-pll.o clk-gate.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o obj-y += clk-mt8135.o +obj-y += clk-mt8173.o diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c new file mode 100644 index 000000000000..357b080eb04f --- /dev/null +++ b/drivers/clk/mediatek/clk-mt8173.c @@ -0,0 +1,830 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: James Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include "clk-mtk.h" +#include "clk-gate.h" + +#include + +static DEFINE_SPINLOCK(mt8173_clk_lock); + +static const struct mtk_fixed_factor root_clk_alias[] __initconst = { + FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1), + FACTOR(CLK_TOP_DPI, "dpi_ck", "clk_null", 1, 1), + FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1), + FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1), +}; + +static const struct mtk_fixed_factor top_divs[] __initconst = { + FACTOR(CLK_TOP_ARMCA7PLL_754M, "armca7pll_754m", "armca7pll", 1, 2), + FACTOR(CLK_TOP_ARMCA7PLL_502M, "armca7pll_502m", "armca7pll", 1, 3), + + FACTOR(CLK_TOP_MAIN_H546M, "main_h546m", "mainpll", 1, 2), + FACTOR(CLK_TOP_MAIN_H364M, "main_h364m", "mainpll", 1, 3), + FACTOR(CLK_TOP_MAIN_H218P4M, "main_h218p4m", "mainpll", 1, 5), + FACTOR(CLK_TOP_MAIN_H156M, "main_h156m", "mainpll", 1, 7), + + FACTOR(CLK_TOP_TVDPLL_445P5M, "tvdpll_445p5m", "tvdpll", 1, 4), + FACTOR(CLK_TOP_TVDPLL_594M, "tvdpll_594m", "tvdpll", 1, 3), + + FACTOR(CLK_TOP_UNIV_624M, "univ_624m", "univpll", 1, 2), + FACTOR(CLK_TOP_UNIV_416M, "univ_416m", "univpll", 1, 3), + FACTOR(CLK_TOP_UNIV_249P6M, "univ_249p6m", "univpll", 1, 5), + FACTOR(CLK_TOP_UNIV_178P3M, "univ_178p3m", "univpll", 1, 7), + FACTOR(CLK_TOP_UNIV_48M, "univ_48m", "univpll", 1, 26), + + FACTOR(CLK_TOP_CLKRTC_EXT, "clkrtc_ext", "clk32k", 1, 1), + FACTOR(CLK_TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793), + FACTOR(CLK_TOP_FPC, "fpc_ck", "clk26m", 1, 1), + + FACTOR(CLK_TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2), + FACTOR(CLK_TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3), + + FACTOR(CLK_TOP_ARMCA7PLL_D2, "armca7pll_d2", "armca7pll_754m", 1, 1), + FACTOR(CLK_TOP_ARMCA7PLL_D3, "armca7pll_d3", "armca7pll_502m", 1, 1), + + FACTOR(CLK_TOP_APLL1, "apll1_ck", "apll1", 1, 1), + FACTOR(CLK_TOP_APLL2, "apll2_ck", "apll2", 1, 1), + + FACTOR(CLK_TOP_DMPLL, "dmpll_ck", "clkph_mck_o", 1, 1), + FACTOR(CLK_TOP_DMPLL_D2, "dmpll_d2", "clkph_mck_o", 1, 2), + FACTOR(CLK_TOP_DMPLL_D4, "dmpll_d4", "clkph_mck_o", 1, 4), + FACTOR(CLK_TOP_DMPLL_D8, "dmpll_d8", "clkph_mck_o", 1, 8), + FACTOR(CLK_TOP_DMPLL_D16, "dmpll_d16", "clkph_mck_o", 1, 16), + + FACTOR(CLK_TOP_LVDSPLL_D2, "lvdspll_d2", "lvdspll", 1, 2), + FACTOR(CLK_TOP_LVDSPLL_D4, "lvdspll_d4", "lvdspll", 1, 4), + FACTOR(CLK_TOP_LVDSPLL_D8, "lvdspll_d8", "lvdspll", 1, 8), + + FACTOR(CLK_TOP_MMPLL, "mmpll_ck", "mmpll", 1, 1), + FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2), + + FACTOR(CLK_TOP_MSDCPLL, "msdcpll_ck", "msdcpll", 1, 1), + FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2), + FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4), + FACTOR(CLK_TOP_MSDCPLL2, "msdcpll2_ck", "msdcpll2", 1, 1), + FACTOR(CLK_TOP_MSDCPLL2_D2, "msdcpll2_d2", "msdcpll2", 1, 2), + FACTOR(CLK_TOP_MSDCPLL2_D4, "msdcpll2_d4", "msdcpll2", 1, 4), + + FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "main_h546m", 1, 1), + FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "main_h546m", 1, 2), + FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "main_h546m", 1, 4), + FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "main_h546m", 1, 8), + FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "main_h546m", 1, 16), + FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "main_h364m", 1, 1), + FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "main_h364m", 1, 2), + FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "main_h364m", 1, 4), + FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "main_h218p4m", 1, 1), + FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "main_h218p4m", 1, 2), + FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "main_h218p4m", 1, 4), + FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "main_h156m", 1, 1), + FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "main_h156m", 1, 2), + FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "main_h156m", 1, 4), + + FACTOR(CLK_TOP_TVDPLL, "tvdpll_ck", "tvdpll_594m", 1, 1), + FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_594m", 1, 2), + FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll_594m", 1, 4), + FACTOR(CLK_TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll_594m", 1, 8), + FACTOR(CLK_TOP_TVDPLL_D16, "tvdpll_d16", "tvdpll_594m", 1, 16), + + FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univ_624m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univ_624m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univ_624m", 1, 4), + FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univ_624m", 1, 8), + FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univ_416m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univ_416m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univ_416m", 1, 4), + FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univ_416m", 1, 8), + FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univ_249p6m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univ_249p6m", 1, 2), + FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univ_249p6m", 1, 4), + FACTOR(CLK_TOP_UNIVPLL3_D8, "univpll3_d8", "univ_249p6m", 1, 8), + FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univ_178p3m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univ_48m", 1, 1), + FACTOR(CLK_TOP_UNIVPLL_D52, "univpll_d52", "univ_48m", 1, 2), + + FACTOR(CLK_TOP_VCODECPLL, "vcodecpll_ck", "vcodecpll", 1, 3), + FACTOR(CLK_TOP_VCODECPLL_370P5, "vcodecpll_370p5", "vcodecpll", 1, 4), + + FACTOR(CLK_TOP_VENCPLL, "vencpll_ck", "vencpll", 1, 1), + FACTOR(CLK_TOP_VENCPLL_D2, "vencpll_d2", "vencpll", 1, 2), + FACTOR(CLK_TOP_VENCPLL_D4, "vencpll_d4", "vencpll", 1, 4), +}; + +static const char * const axi_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll_d5", + "syspll1_d4", + "univpll_d5", + "univpll2_d2", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const mem_parents[] __initconst = { + "clk26m", + "dmpll_ck" +}; + +static const char * const ddrphycfg_parents[] __initconst = { + "clk26m", + "syspll1_d8" +}; + +static const char * const mm_parents[] __initconst = { + "clk26m", + "vencpll_d2", + "main_h364m", + "syspll1_d2", + "syspll_d5", + "syspll1_d4", + "univpll1_d2", + "univpll2_d2", + "dmpll_d2" +}; + +static const char * const pwm_parents[] __initconst = { + "clk26m", + "univpll2_d4", + "univpll3_d2", + "univpll1_d4" +}; + +static const char * const vdec_parents[] __initconst = { + "clk26m", + "vcodecpll_ck", + "tvdpll_445p5m", + "univpll_d3", + "vencpll_d2", + "syspll_d3", + "univpll1_d2", + "mmpll_d2", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const venc_parents[] __initconst = { + "clk26m", + "vcodecpll_ck", + "tvdpll_445p5m", + "univpll_d3", + "vencpll_d2", + "syspll_d3", + "univpll1_d2", + "univpll2_d2", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const mfg_parents[] __initconst = { + "clk26m", + "mmpll_ck", + "dmpll_ck", + "clk26m", + "clk26m", + "clk26m", + "clk26m", + "clk26m", + "clk26m", + "syspll_d3", + "syspll1_d2", + "syspll_d5", + "univpll_d3", + "univpll1_d2", + "univpll_d5", + "univpll2_d2" +}; + +static const char * const camtg_parents[] __initconst = { + "clk26m", + "univpll_d26", + "univpll2_d2", + "syspll3_d2", + "syspll3_d4", + "univpll1_d4" +}; + +static const char * const uart_parents[] __initconst = { + "clk26m", + "univpll2_d8" +}; + +static const char * const spi_parents[] __initconst = { + "clk26m", + "syspll3_d2", + "syspll1_d4", + "syspll4_d2", + "univpll3_d2", + "univpll2_d4", + "univpll1_d8" +}; + +static const char * const usb20_parents[] __initconst = { + "clk26m", + "univpll1_d8", + "univpll3_d4" +}; + +static const char * const usb30_parents[] __initconst = { + "clk26m", + "univpll3_d2", + "usb_syspll_125m", + "univpll2_d4" +}; + +static const char * const msdc50_0_h_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll2_d2", + "syspll4_d2", + "univpll_d5", + "univpll1_d4" +}; + +static const char * const msdc50_0_parents[] __initconst = { + "clk26m", + "msdcpll_ck", + "msdcpll_d2", + "univpll1_d4", + "syspll2_d2", + "syspll_d7", + "msdcpll_d4", + "vencpll_d4", + "tvdpll_ck", + "univpll_d2", + "univpll1_d2", + "mmpll_ck", + "msdcpll2_ck", + "msdcpll2_d2", + "msdcpll2_d4" +}; + +static const char * const msdc30_1_parents[] __initconst = { + "clk26m", + "univpll2_d2", + "msdcpll_d4", + "univpll1_d4", + "syspll2_d2", + "syspll_d7", + "univpll_d7", + "vencpll_d4" +}; + +static const char * const msdc30_2_parents[] __initconst = { + "clk26m", + "univpll2_d2", + "msdcpll_d4", + "univpll1_d4", + "syspll2_d2", + "syspll_d7", + "univpll_d7", + "vencpll_d2" +}; + +static const char * const msdc30_3_parents[] __initconst = { + "clk26m", + "msdcpll2_ck", + "msdcpll2_d2", + "univpll2_d2", + "msdcpll2_d4", + "msdcpll_d4", + "univpll1_d4", + "syspll2_d2", + "syspll_d7", + "univpll_d7", + "vencpll_d4", + "msdcpll_ck", + "msdcpll_d2", + "msdcpll_d4" +}; + +static const char * const audio_parents[] __initconst = { + "clk26m", + "syspll3_d4", + "syspll4_d4", + "syspll1_d16" +}; + +static const char * const aud_intbus_parents[] __initconst = { + "clk26m", + "syspll1_d4", + "syspll4_d2", + "univpll3_d2", + "univpll2_d8", + "dmpll_d4", + "dmpll_d8" +}; + +static const char * const pmicspi_parents[] __initconst = { + "clk26m", + "syspll1_d8", + "syspll3_d4", + "syspll1_d16", + "univpll3_d4", + "univpll_d26", + "dmpll_d8", + "dmpll_d16" +}; + +static const char * const scp_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "univpll_d5", + "syspll_d5", + "dmpll_d2", + "dmpll_d4" +}; + +static const char * const atb_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "univpll_d5", + "dmpll_d2" +}; + +static const char * const venc_lt_parents[] __initconst = { + "clk26m", + "univpll_d3", + "vcodecpll_ck", + "tvdpll_445p5m", + "vencpll_d2", + "syspll_d3", + "univpll1_d2", + "univpll2_d2", + "syspll1_d2", + "univpll_d5", + "vcodecpll_370p5", + "dmpll_ck" +}; + +static const char * const dpi0_parents[] __initconst = { + "clk26m", + "tvdpll_d2", + "tvdpll_d4", + "clk26m", + "clk26m", + "tvdpll_d8", + "tvdpll_d16" +}; + +static const char * const irda_parents[] __initconst = { + "clk26m", + "univpll2_d4", + "syspll2_d4" +}; + +static const char * const cci400_parents[] __initconst = { + "clk26m", + "vencpll_ck", + "armca7pll_754m", + "armca7pll_502m", + "univpll_d2", + "syspll_d2", + "msdcpll_ck", + "dmpll_ck" +}; + +static const char * const aud_1_parents[] __initconst = { + "clk26m", + "apll1_ck", + "univpll2_d4", + "univpll2_d8" +}; + +static const char * const aud_2_parents[] __initconst = { + "clk26m", + "apll2_ck", + "univpll2_d4", + "univpll2_d8" +}; + +static const char * const mem_mfg_in_parents[] __initconst = { + "clk26m", + "mmpll_ck", + "dmpll_ck", + "clk26m" +}; + +static const char * const axi_mfg_in_parents[] __initconst = { + "clk26m", + "axi_sel", + "dmpll_d2" +}; + +static const char * const scam_parents[] __initconst = { + "clk26m", + "syspll3_d2", + "univpll2_d4", + "dmpll_d4" +}; + +static const char * const spinfi_ifr_parents[] __initconst = { + "clk26m", + "univpll2_d8", + "univpll3_d4", + "syspll4_d2", + "univpll2_d4", + "univpll3_d2", + "syspll1_d4", + "univpll1_d4" +}; + +static const char * const hdmi_parents[] __initconst = { + "clk26m", + "hdmitx_dig_cts", + "hdmitxpll_d2", + "hdmitxpll_d3" +}; + +static const char * const dpilvds_parents[] __initconst = { + "clk26m", + "lvdspll", + "lvdspll_d2", + "lvdspll_d4", + "lvdspll_d8", + "fpc_ck" +}; + +static const char * const msdc50_2_h_parents[] __initconst = { + "clk26m", + "syspll1_d2", + "syspll2_d2", + "syspll4_d2", + "univpll_d5", + "univpll1_d4" +}; + +static const char * const hdcp_parents[] __initconst = { + "clk26m", + "syspll4_d2", + "syspll3_d4", + "univpll2_d4" +}; + +static const char * const hdcp_24m_parents[] __initconst = { + "clk26m", + "univpll_d26", + "univpll_d52", + "univpll2_d8" +}; + +static const char * const rtc_parents[] __initconst = { + "clkrtc_int", + "clkrtc_ext", + "clk26m", + "univpll3_d8" +}; + +static const char * const i2s0_m_ck_parents[] __initconst = { + "apll1_div1", + "apll2_div1" +}; + +static const char * const i2s1_m_ck_parents[] __initconst = { + "apll1_div2", + "apll2_div2" +}; + +static const char * const i2s2_m_ck_parents[] __initconst = { + "apll1_div3", + "apll2_div3" +}; + +static const char * const i2s3_m_ck_parents[] __initconst = { + "apll1_div4", + "apll2_div4" +}; + +static const char * const i2s3_b_ck_parents[] __initconst = { + "apll1_div5", + "apll2_div5" +}; + +static const struct mtk_composite top_muxes[] __initconst = { + /* CLK_CFG_0 */ + MUX(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3), + MUX(CLK_TOP_MEM_SEL, "mem_sel", mem_parents, 0x0040, 8, 1), + MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents, 0x0040, 16, 1, 23), + MUX_GATE(CLK_TOP_MM_SEL, "mm_sel", mm_parents, 0x0040, 24, 4, 31), + /* CLK_CFG_1 */ + MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x0050, 0, 2, 7), + MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel", vdec_parents, 0x0050, 8, 4, 15), + MUX_GATE(CLK_TOP_VENC_SEL, "venc_sel", venc_parents, 0x0050, 16, 4, 23), + MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel", mfg_parents, 0x0050, 24, 4, 31), + /* CLK_CFG_2 */ + MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel", camtg_parents, 0x0060, 0, 3, 7), + MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x0060, 8, 1, 15), + MUX_GATE(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x0060, 16, 3, 23), + MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel", usb20_parents, 0x0060, 24, 2, 31), + /* CLK_CFG_3 */ + MUX_GATE(CLK_TOP_USB30_SEL, "usb30_sel", usb30_parents, 0x0070, 0, 2, 7), + MUX_GATE(CLK_TOP_MSDC50_0_H_SEL, "msdc50_0_h_sel", msdc50_0_h_parents, 0x0070, 8, 3, 15), + MUX_GATE(CLK_TOP_MSDC50_0_SEL, "msdc50_0_sel", msdc50_0_parents, 0x0070, 16, 4, 23), + MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_1_parents, 0x0070, 24, 3, 31), + /* CLK_CFG_4 */ + MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_2_parents, 0x0080, 0, 3, 7), + MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_3_parents, 0x0080, 8, 4, 15), + MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", audio_parents, 0x0080, 16, 2, 23), + MUX_GATE(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents, 0x0080, 24, 3, 31), + /* CLK_CFG_5 */ + MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents, 0x0090, 0, 3, 7 /* 7:5 */), + MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", scp_parents, 0x0090, 8, 3, 15), + MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23), + MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31), + /* CLK_CFG_6 */ + MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7), + MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15), + MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23), + MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31), + /* CLK_CFG_7 */ + MUX_GATE(CLK_TOP_AUD_2_SEL, "aud_2_sel", aud_2_parents, 0x00b0, 0, 2, 7), + MUX_GATE(CLK_TOP_MEM_MFG_IN_SEL, "mem_mfg_in_sel", mem_mfg_in_parents, 0x00b0, 8, 2, 15), + MUX_GATE(CLK_TOP_AXI_MFG_IN_SEL, "axi_mfg_in_sel", axi_mfg_in_parents, 0x00b0, 16, 2, 23), + MUX_GATE(CLK_TOP_SCAM_SEL, "scam_sel", scam_parents, 0x00b0, 24, 2, 31), + /* CLK_CFG_12 */ + MUX_GATE(CLK_TOP_SPINFI_IFR_SEL, "spinfi_ifr_sel", spinfi_ifr_parents, 0x00c0, 0, 3, 7), + MUX_GATE(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents, 0x00c0, 8, 2, 15), + MUX_GATE(CLK_TOP_DPILVDS_SEL, "dpilvds_sel", dpilvds_parents, 0x00c0, 24, 3, 31), + /* CLK_CFG_13 */ + MUX_GATE(CLK_TOP_MSDC50_2_H_SEL, "msdc50_2_h_sel", msdc50_2_h_parents, 0x00d0, 0, 3, 7), + MUX_GATE(CLK_TOP_HDCP_SEL, "hdcp_sel", hdcp_parents, 0x00d0, 8, 2, 15), + MUX_GATE(CLK_TOP_HDCP_24M_SEL, "hdcp_24m_sel", hdcp_24m_parents, 0x00d0, 16, 2, 23), + MUX(CLK_TOP_RTC_SEL, "rtc_sel", rtc_parents, 0x00d0, 24, 2), + + DIV_GATE(CLK_TOP_APLL1_DIV0, "apll1_div0", "aud_1_sel", 0x12c, 8, 0x120, 4, 24), + DIV_GATE(CLK_TOP_APLL1_DIV1, "apll1_div1", "aud_1_sel", 0x12c, 9, 0x124, 8, 0), + DIV_GATE(CLK_TOP_APLL1_DIV2, "apll1_div2", "aud_1_sel", 0x12c, 10, 0x124, 8, 8), + DIV_GATE(CLK_TOP_APLL1_DIV3, "apll1_div3", "aud_1_sel", 0x12c, 11, 0x124, 8, 16), + DIV_GATE(CLK_TOP_APLL1_DIV4, "apll1_div4", "aud_1_sel", 0x12c, 12, 0x124, 8, 24), + DIV_GATE(CLK_TOP_APLL1_DIV5, "apll1_div5", "apll1_div4", 0x12c, 13, 0x12c, 4, 0), + + DIV_GATE(CLK_TOP_APLL2_DIV0, "apll2_div0", "aud_2_sel", 0x12c, 16, 0x120, 4, 28), + DIV_GATE(CLK_TOP_APLL2_DIV1, "apll2_div1", "aud_2_sel", 0x12c, 17, 0x128, 8, 0), + DIV_GATE(CLK_TOP_APLL2_DIV2, "apll2_div2", "aud_2_sel", 0x12c, 18, 0x128, 8, 8), + DIV_GATE(CLK_TOP_APLL2_DIV3, "apll2_div3", "aud_2_sel", 0x12c, 19, 0x128, 8, 16), + DIV_GATE(CLK_TOP_APLL2_DIV4, "apll2_div4", "aud_2_sel", 0x12c, 20, 0x128, 8, 24), + DIV_GATE(CLK_TOP_APLL2_DIV5, "apll2_div5", "apll2_div4", 0x12c, 21, 0x12c, 4, 4), + + MUX(CLK_TOP_I2S0_M_SEL, "i2s0_m_ck_sel", i2s0_m_ck_parents, 0x120, 4, 1), + MUX(CLK_TOP_I2S1_M_SEL, "i2s1_m_ck_sel", i2s1_m_ck_parents, 0x120, 5, 1), + MUX(CLK_TOP_I2S2_M_SEL, "i2s2_m_ck_sel", i2s2_m_ck_parents, 0x120, 6, 1), + MUX(CLK_TOP_I2S3_M_SEL, "i2s3_m_ck_sel", i2s3_m_ck_parents, 0x120, 7, 1), + MUX(CLK_TOP_I2S3_B_SEL, "i2s3_b_ck_sel", i2s3_b_ck_parents, 0x120, 8, 1), +}; + +static const struct mtk_gate_regs infra_cg_regs = { + .set_ofs = 0x0040, + .clr_ofs = 0x0044, + .sta_ofs = 0x0048, +}; + +#define GATE_ICG(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &infra_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate infra_clks[] __initconst = { + GATE_ICG(CLK_INFRA_DBGCLK, "infra_dbgclk", "axi_sel", 0), + GATE_ICG(CLK_INFRA_SMI, "infra_smi", "mm_sel", 1), + GATE_ICG(CLK_INFRA_AUDIO, "infra_audio", "aud_intbus_sel", 5), + GATE_ICG(CLK_INFRA_GCE, "infra_gce", "axi_sel", 6), + GATE_ICG(CLK_INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7), + GATE_ICG(CLK_INFRA_M4U, "infra_m4u", "mem_sel", 8), + GATE_ICG(CLK_INFRA_CPUM, "infra_cpum", "clk_null", 15), + GATE_ICG(CLK_INFRA_KP, "infra_kp", "axi_sel", 16), + GATE_ICG(CLK_INFRA_CEC, "infra_cec", "clk26m", 18), + GATE_ICG(CLK_INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22), + GATE_ICG(CLK_INFRA_PMICWRAP, "infra_pmicwrap", "axi_sel", 23), +}; + +static const struct mtk_gate_regs peri0_cg_regs = { + .set_ofs = 0x0008, + .clr_ofs = 0x0010, + .sta_ofs = 0x0018, +}; + +static const struct mtk_gate_regs peri1_cg_regs = { + .set_ofs = 0x000c, + .clr_ofs = 0x0014, + .sta_ofs = 0x001c, +}; + +#define GATE_PERI0(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri0_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +#define GATE_PERI1(_id, _name, _parent, _shift) { \ + .id = _id, \ + .name = _name, \ + .parent_name = _parent, \ + .regs = &peri1_cg_regs, \ + .shift = _shift, \ + .ops = &mtk_clk_gate_ops_setclr, \ + } + +static const struct mtk_gate peri_gates[] __initconst = { + /* PERI0 */ + GATE_PERI0(CLK_PERI_NFI, "peri_nfi", "axi_sel", 0), + GATE_PERI0(CLK_PERI_THERM, "peri_therm", "axi_sel", 1), + GATE_PERI0(CLK_PERI_PWM1, "peri_pwm1", "axi_sel", 2), + GATE_PERI0(CLK_PERI_PWM2, "peri_pwm2", "axi_sel", 3), + GATE_PERI0(CLK_PERI_PWM3, "peri_pwm3", "axi_sel", 4), + GATE_PERI0(CLK_PERI_PWM4, "peri_pwm4", "axi_sel", 5), + GATE_PERI0(CLK_PERI_PWM5, "peri_pwm5", "axi_sel", 6), + GATE_PERI0(CLK_PERI_PWM6, "peri_pwm6", "axi_sel", 7), + GATE_PERI0(CLK_PERI_PWM7, "peri_pwm7", "axi_sel", 8), + GATE_PERI0(CLK_PERI_PWM, "peri_pwm", "axi_sel", 9), + GATE_PERI0(CLK_PERI_USB0, "peri_usb0", "usb20_sel", 10), + GATE_PERI0(CLK_PERI_USB1, "peri_usb1", "usb20_sel", 11), + GATE_PERI0(CLK_PERI_AP_DMA, "peri_ap_dma", "axi_sel", 12), + GATE_PERI0(CLK_PERI_MSDC30_0, "peri_msdc30_0", "msdc50_0_sel", 13), + GATE_PERI0(CLK_PERI_MSDC30_1, "peri_msdc30_1", "msdc30_1_sel", 14), + GATE_PERI0(CLK_PERI_MSDC30_2, "peri_msdc30_2", "msdc30_2_sel", 15), + GATE_PERI0(CLK_PERI_MSDC30_3, "peri_msdc30_3", "msdc30_3_sel", 16), + GATE_PERI0(CLK_PERI_NLI_ARB, "peri_nli_arb", "axi_sel", 17), + GATE_PERI0(CLK_PERI_IRDA, "peri_irda", "irda_sel", 18), + GATE_PERI0(CLK_PERI_UART0, "peri_uart0", "axi_sel", 19), + GATE_PERI0(CLK_PERI_UART1, "peri_uart1", "axi_sel", 20), + GATE_PERI0(CLK_PERI_UART2, "peri_uart2", "axi_sel", 21), + GATE_PERI0(CLK_PERI_UART3, "peri_uart3", "axi_sel", 22), + GATE_PERI0(CLK_PERI_I2C0, "peri_i2c0", "axi_sel", 23), + GATE_PERI0(CLK_PERI_I2C1, "peri_i2c1", "axi_sel", 24), + GATE_PERI0(CLK_PERI_I2C2, "peri_i2c2", "axi_sel", 25), + GATE_PERI0(CLK_PERI_I2C3, "peri_i2c3", "axi_sel", 26), + GATE_PERI0(CLK_PERI_I2C4, "peri_i2c4", "axi_sel", 27), + GATE_PERI0(CLK_PERI_AUXADC, "peri_auxadc", "clk26m", 28), + GATE_PERI0(CLK_PERI_SPI0, "peri_spi0", "spi_sel", 29), + GATE_PERI0(CLK_PERI_I2C5, "peri_i2c5", "axi_sel", 30), + GATE_PERI0(CLK_PERI_NFIECC, "peri_nfiecc", "axi_sel", 31), + /* PERI1 */ + GATE_PERI1(CLK_PERI_SPI, "peri_spi", "spi_sel", 0), + GATE_PERI1(CLK_PERI_IRRX, "peri_irrx", "spi_sel", 1), + GATE_PERI1(CLK_PERI_I2C6, "peri_i2c6", "axi_sel", 2), +}; + +static const char * const uart_ck_sel_parents[] __initconst = { + "clk26m", + "uart_sel", +}; + +static const struct mtk_composite peri_clks[] __initconst = { + MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents, 0x40c, 0, 1), + MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents, 0x40c, 1, 1), + MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents, 0x40c, 2, 1), + MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1), +}; + +static void __init mtk_topckgen_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + void __iomem *base; + int r; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK); + + mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data); + mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data); + mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base, + &mt8173_clk_lock, clk_data); + + clk_prepare_enable(clk_data->clks[CLK_TOP_CCI400_SEL]); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); +} +CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt8173-topckgen", mtk_topckgen_init); + +static void __init mtk_infrasys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + + clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK); + + mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), + clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); + + mtk_register_reset_controller(node, 2, 0x30); +} +CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt8173-infracfg", mtk_infrasys_init); + +static void __init mtk_pericfg_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + int r; + void __iomem *base; + + base = of_iomap(node, 0); + if (!base) { + pr_err("%s(): ioremap failed\n", __func__); + return; + } + + clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK); + + mtk_clk_register_gates(node, peri_gates, ARRAY_SIZE(peri_gates), + clk_data); + mtk_clk_register_composites(peri_clks, ARRAY_SIZE(peri_clks), base, + &mt8173_clk_lock, clk_data); + + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (r) + pr_err("%s(): could not register clock provider: %d\n", + __func__, r); + + mtk_register_reset_controller(node, 2, 0); +} +CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init); + +#define MT8173_PLL_FMAX (3000UL * MHZ) + +#define CON0_MT8173_RST_BAR BIT(24) + +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, _pd_shift, \ + _tuner_reg, _pcw_reg, _pcw_shift) { \ + .id = _id, \ + .name = _name, \ + .reg = _reg, \ + .pwr_reg = _pwr_reg, \ + .en_mask = _en_mask, \ + .flags = _flags, \ + .rst_bar_mask = CON0_MT8173_RST_BAR, \ + .fmax = MT8173_PLL_FMAX, \ + .pcwbits = _pcwbits, \ + .pd_reg = _pd_reg, \ + .pd_shift = _pd_shift, \ + .tuner_reg = _tuner_reg, \ + .pcw_reg = _pcw_reg, \ + .pcw_shift = _pcw_shift, \ + } + +static const struct mtk_pll_data plls[] = { + PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0x00000001, 0, 21, 0x204, 24, 0x0, 0x204, 0), + PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0x00000001, 0, 21, 0x214, 24, 0x0, 0x214, 0), + PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000101, HAVE_RST_BAR, 21, 0x220, 4, 0x0, 0x224, 0), + PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000001, HAVE_RST_BAR, 7, 0x230, 4, 0x0, 0x234, 14), + PLL(CLK_APMIXED_MMPLL, "mmpll", 0x240, 0x24c, 0x00000001, 0, 21, 0x244, 24, 0x0, 0x244, 0), + PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x250, 0x25c, 0x00000001, 0, 21, 0x250, 4, 0x0, 0x254, 0), + PLL(CLK_APMIXED_VENCPLL, "vencpll", 0x260, 0x26c, 0x00000001, 0, 21, 0x260, 4, 0x0, 0x264, 0), + PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x270, 0x27c, 0x00000001, 0, 21, 0x270, 4, 0x0, 0x274, 0), + PLL(CLK_APMIXED_MPLL, "mpll", 0x280, 0x28c, 0x00000001, 0, 21, 0x280, 4, 0x0, 0x284, 0), + PLL(CLK_APMIXED_VCODECPLL, "vcodecpll", 0x290, 0x29c, 0x00000001, 0, 21, 0x290, 4, 0x0, 0x294, 0), + PLL(CLK_APMIXED_APLL1, "apll1", 0x2a0, 0x2b0, 0x00000001, 0, 31, 0x2a0, 4, 0x2a4, 0x2a4, 0), + PLL(CLK_APMIXED_APLL2, "apll2", 0x2b4, 0x2c4, 0x00000001, 0, 31, 0x2b4, 4, 0x2b8, 0x2b8, 0), + PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x2d0, 0x2dc, 0x00000001, 0, 21, 0x2d0, 4, 0x0, 0x2d4, 0), + PLL(CLK_APMIXED_MSDCPLL2, "msdcpll2", 0x2f0, 0x2fc, 0x00000001, 0, 21, 0x2f0, 4, 0x0, 0x2f4, 0), +}; + +static void __init mtk_apmixedsys_init(struct device_node *node) +{ + struct clk_onecell_data *clk_data; + + clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls)); + if (!clk_data) + return; + + mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data); + + clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMCA15PLL]); +} +CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys", + mtk_apmixedsys_init); diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h new file mode 100644 index 000000000000..4ad76ed882ad --- /dev/null +++ b/include/dt-bindings/clock/mt8173-clk.h @@ -0,0 +1,235 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: James Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MT8173_H +#define _DT_BINDINGS_CLK_MT8173_H + +/* TOPCKGEN */ + +#define CLK_TOP_CLKPH_MCK_O 1 +#define CLK_TOP_DPI 2 +#define CLK_TOP_USB_SYSPLL_125M 3 +#define CLK_TOP_HDMITX_DIG_CTS 4 +#define CLK_TOP_ARMCA7PLL_754M 5 +#define CLK_TOP_ARMCA7PLL_502M 6 +#define CLK_TOP_MAIN_H546M 7 +#define CLK_TOP_MAIN_H364M 8 +#define CLK_TOP_MAIN_H218P4M 9 +#define CLK_TOP_MAIN_H156M 10 +#define CLK_TOP_TVDPLL_445P5M 11 +#define CLK_TOP_TVDPLL_594M 12 +#define CLK_TOP_UNIV_624M 13 +#define CLK_TOP_UNIV_416M 14 +#define CLK_TOP_UNIV_249P6M 15 +#define CLK_TOP_UNIV_178P3M 16 +#define CLK_TOP_UNIV_48M 17 +#define CLK_TOP_CLKRTC_EXT 18 +#define CLK_TOP_CLKRTC_INT 19 +#define CLK_TOP_FPC 20 +#define CLK_TOP_HDMITXPLL_D2 21 +#define CLK_TOP_HDMITXPLL_D3 22 +#define CLK_TOP_ARMCA7PLL_D2 23 +#define CLK_TOP_ARMCA7PLL_D3 24 +#define CLK_TOP_APLL1 25 +#define CLK_TOP_APLL2 26 +#define CLK_TOP_DMPLL 27 +#define CLK_TOP_DMPLL_D2 28 +#define CLK_TOP_DMPLL_D4 29 +#define CLK_TOP_DMPLL_D8 30 +#define CLK_TOP_DMPLL_D16 31 +#define CLK_TOP_LVDSPLL_D2 32 +#define CLK_TOP_LVDSPLL_D4 33 +#define CLK_TOP_LVDSPLL_D8 34 +#define CLK_TOP_MMPLL 35 +#define CLK_TOP_MMPLL_D2 36 +#define CLK_TOP_MSDCPLL 37 +#define CLK_TOP_MSDCPLL_D2 38 +#define CLK_TOP_MSDCPLL_D4 39 +#define CLK_TOP_MSDCPLL2 40 +#define CLK_TOP_MSDCPLL2_D2 41 +#define CLK_TOP_MSDCPLL2_D4 42 +#define CLK_TOP_SYSPLL_D2 43 +#define CLK_TOP_SYSPLL1_D2 44 +#define CLK_TOP_SYSPLL1_D4 45 +#define CLK_TOP_SYSPLL1_D8 46 +#define CLK_TOP_SYSPLL1_D16 47 +#define CLK_TOP_SYSPLL_D3 48 +#define CLK_TOP_SYSPLL2_D2 49 +#define CLK_TOP_SYSPLL2_D4 50 +#define CLK_TOP_SYSPLL_D5 51 +#define CLK_TOP_SYSPLL3_D2 52 +#define CLK_TOP_SYSPLL3_D4 53 +#define CLK_TOP_SYSPLL_D7 54 +#define CLK_TOP_SYSPLL4_D2 55 +#define CLK_TOP_SYSPLL4_D4 56 +#define CLK_TOP_TVDPLL 57 +#define CLK_TOP_TVDPLL_D2 58 +#define CLK_TOP_TVDPLL_D4 59 +#define CLK_TOP_TVDPLL_D8 60 +#define CLK_TOP_TVDPLL_D16 61 +#define CLK_TOP_UNIVPLL_D2 62 +#define CLK_TOP_UNIVPLL1_D2 63 +#define CLK_TOP_UNIVPLL1_D4 64 +#define CLK_TOP_UNIVPLL1_D8 65 +#define CLK_TOP_UNIVPLL_D3 66 +#define CLK_TOP_UNIVPLL2_D2 67 +#define CLK_TOP_UNIVPLL2_D4 68 +#define CLK_TOP_UNIVPLL2_D8 69 +#define CLK_TOP_UNIVPLL_D5 70 +#define CLK_TOP_UNIVPLL3_D2 71 +#define CLK_TOP_UNIVPLL3_D4 72 +#define CLK_TOP_UNIVPLL3_D8 73 +#define CLK_TOP_UNIVPLL_D7 74 +#define CLK_TOP_UNIVPLL_D26 75 +#define CLK_TOP_UNIVPLL_D52 76 +#define CLK_TOP_VCODECPLL 77 +#define CLK_TOP_VCODECPLL_370P5 78 +#define CLK_TOP_VENCPLL 79 +#define CLK_TOP_VENCPLL_D2 80 +#define CLK_TOP_VENCPLL_D4 81 +#define CLK_TOP_AXI_SEL 82 +#define CLK_TOP_MEM_SEL 83 +#define CLK_TOP_DDRPHYCFG_SEL 84 +#define CLK_TOP_MM_SEL 85 +#define CLK_TOP_PWM_SEL 86 +#define CLK_TOP_VDEC_SEL 87 +#define CLK_TOP_VENC_SEL 88 +#define CLK_TOP_MFG_SEL 89 +#define CLK_TOP_CAMTG_SEL 90 +#define CLK_TOP_UART_SEL 91 +#define CLK_TOP_SPI_SEL 92 +#define CLK_TOP_USB20_SEL 93 +#define CLK_TOP_USB30_SEL 94 +#define CLK_TOP_MSDC50_0_H_SEL 95 +#define CLK_TOP_MSDC50_0_SEL 96 +#define CLK_TOP_MSDC30_1_SEL 97 +#define CLK_TOP_MSDC30_2_SEL 98 +#define CLK_TOP_MSDC30_3_SEL 99 +#define CLK_TOP_AUDIO_SEL 100 +#define CLK_TOP_AUD_INTBUS_SEL 101 +#define CLK_TOP_PMICSPI_SEL 102 +#define CLK_TOP_SCP_SEL 103 +#define CLK_TOP_ATB_SEL 104 +#define CLK_TOP_VENC_LT_SEL 105 +#define CLK_TOP_DPI0_SEL 106 +#define CLK_TOP_IRDA_SEL 107 +#define CLK_TOP_CCI400_SEL 108 +#define CLK_TOP_AUD_1_SEL 109 +#define CLK_TOP_AUD_2_SEL 110 +#define CLK_TOP_MEM_MFG_IN_SEL 111 +#define CLK_TOP_AXI_MFG_IN_SEL 112 +#define CLK_TOP_SCAM_SEL 113 +#define CLK_TOP_SPINFI_IFR_SEL 114 +#define CLK_TOP_HDMI_SEL 115 +#define CLK_TOP_DPILVDS_SEL 116 +#define CLK_TOP_MSDC50_2_H_SEL 117 +#define CLK_TOP_HDCP_SEL 118 +#define CLK_TOP_HDCP_24M_SEL 119 +#define CLK_TOP_RTC_SEL 120 +#define CLK_TOP_APLL1_DIV0 121 +#define CLK_TOP_APLL1_DIV1 122 +#define CLK_TOP_APLL1_DIV2 123 +#define CLK_TOP_APLL1_DIV3 124 +#define CLK_TOP_APLL1_DIV4 125 +#define CLK_TOP_APLL1_DIV5 126 +#define CLK_TOP_APLL2_DIV0 127 +#define CLK_TOP_APLL2_DIV1 128 +#define CLK_TOP_APLL2_DIV2 129 +#define CLK_TOP_APLL2_DIV3 130 +#define CLK_TOP_APLL2_DIV4 131 +#define CLK_TOP_APLL2_DIV5 132 +#define CLK_TOP_I2S0_M_SEL 133 +#define CLK_TOP_I2S1_M_SEL 134 +#define CLK_TOP_I2S2_M_SEL 135 +#define CLK_TOP_I2S3_M_SEL 136 +#define CLK_TOP_I2S3_B_SEL 137 +#define CLK_TOP_NR_CLK 138 + +/* APMIXED_SYS */ + +#define CLK_APMIXED_ARMCA15PLL 1 +#define CLK_APMIXED_ARMCA7PLL 2 +#define CLK_APMIXED_MAINPLL 3 +#define CLK_APMIXED_UNIVPLL 4 +#define CLK_APMIXED_MMPLL 5 +#define CLK_APMIXED_MSDCPLL 6 +#define CLK_APMIXED_VENCPLL 7 +#define CLK_APMIXED_TVDPLL 8 +#define CLK_APMIXED_MPLL 9 +#define CLK_APMIXED_VCODECPLL 10 +#define CLK_APMIXED_APLL1 11 +#define CLK_APMIXED_APLL2 12 +#define CLK_APMIXED_LVDSPLL 13 +#define CLK_APMIXED_MSDCPLL2 14 +#define CLK_APMIXED_NR_CLK 15 + +/* INFRA_SYS */ + +#define CLK_INFRA_DBGCLK 1 +#define CLK_INFRA_SMI 2 +#define CLK_INFRA_AUDIO 3 +#define CLK_INFRA_GCE 4 +#define CLK_INFRA_L2C_SRAM 5 +#define CLK_INFRA_M4U 6 +#define CLK_INFRA_CPUM 7 +#define CLK_INFRA_KP 8 +#define CLK_INFRA_CEC 9 +#define CLK_INFRA_PMICSPI 10 +#define CLK_INFRA_PMICWRAP 11 +#define CLK_INFRA_NR_CLK 12 + +/* PERI_SYS */ + +#define CLK_PERI_NFI 1 +#define CLK_PERI_THERM 2 +#define CLK_PERI_PWM1 3 +#define CLK_PERI_PWM2 4 +#define CLK_PERI_PWM3 5 +#define CLK_PERI_PWM4 6 +#define CLK_PERI_PWM5 7 +#define CLK_PERI_PWM6 8 +#define CLK_PERI_PWM7 9 +#define CLK_PERI_PWM 10 +#define CLK_PERI_USB0 11 +#define CLK_PERI_USB1 12 +#define CLK_PERI_AP_DMA 13 +#define CLK_PERI_MSDC30_0 14 +#define CLK_PERI_MSDC30_1 15 +#define CLK_PERI_MSDC30_2 16 +#define CLK_PERI_MSDC30_3 17 +#define CLK_PERI_NLI_ARB 18 +#define CLK_PERI_IRDA 19 +#define CLK_PERI_UART0 20 +#define CLK_PERI_UART1 21 +#define CLK_PERI_UART2 22 +#define CLK_PERI_UART3 23 +#define CLK_PERI_I2C0 24 +#define CLK_PERI_I2C1 25 +#define CLK_PERI_I2C2 26 +#define CLK_PERI_I2C3 27 +#define CLK_PERI_I2C4 28 +#define CLK_PERI_AUXADC 29 +#define CLK_PERI_SPI0 30 +#define CLK_PERI_I2C5 31 +#define CLK_PERI_NFIECC 32 +#define CLK_PERI_SPI 33 +#define CLK_PERI_IRRX 34 +#define CLK_PERI_I2C6 35 +#define CLK_PERI_UART0_SEL 36 +#define CLK_PERI_UART1_SEL 37 +#define CLK_PERI_UART2_SEL 38 +#define CLK_PERI_UART3_SEL 39 +#define CLK_PERI_NR_CLK 40 + +#endif /* _DT_BINDINGS_CLK_MT8173_H */ diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset-controller/mt8173-resets.h new file mode 100644 index 000000000000..9464b37cf68c --- /dev/null +++ b/include/dt-bindings/reset-controller/mt8173-resets.h @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu, MediaTek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8173 +#define _DT_BINDINGS_RESET_CONTROLLER_MT8173 + +/* INFRACFG resets */ +#define MT8173_INFRA_EMI_REG_RST 0 +#define MT8173_INFRA_DRAMC0_A0_RST 1 +#define MT8173_INFRA_APCIRQ_EINT_RST 3 +#define MT8173_INFRA_APXGPT_RST 4 +#define MT8173_INFRA_SCPSYS_RST 5 +#define MT8173_INFRA_KP_RST 6 +#define MT8173_INFRA_PMIC_WRAP_RST 7 +#define MT8173_INFRA_MPIP_RST 8 +#define MT8173_INFRA_CEC_RST 9 +#define MT8173_INFRA_EMI_RST 32 +#define MT8173_INFRA_DRAMC0_RST 34 +#define MT8173_INFRA_APMIXEDSYS_RST 35 +#define MT8173_INFRA_MIPI_DSI_RST 36 +#define MT8173_INFRA_TRNG_RST 37 +#define MT8173_INFRA_SYSIRQ_RST 38 +#define MT8173_INFRA_MIPI_CSI_RST 39 +#define MT8173_INFRA_GCE_FAXI_RST 40 +#define MT8173_INFRA_MMIOMMURST 47 + + +/* PERICFG resets */ +#define MT8173_PERI_UART0_SW_RST 0 +#define MT8173_PERI_UART1_SW_RST 1 +#define MT8173_PERI_UART2_SW_RST 2 +#define MT8173_PERI_UART3_SW_RST 3 +#define MT8173_PERI_IRRX_SW_RST 4 +#define MT8173_PERI_PWM_SW_RST 8 +#define MT8173_PERI_AUXADC_SW_RST 10 +#define MT8173_PERI_DMA_SW_RST 11 +#define MT8173_PERI_I2C6_SW_RST 13 +#define MT8173_PERI_NFI_SW_RST 14 +#define MT8173_PERI_THERM_SW_RST 16 +#define MT8173_PERI_MSDC2_SW_RST 17 +#define MT8173_PERI_MSDC3_SW_RST 18 +#define MT8173_PERI_MSDC0_SW_RST 19 +#define MT8173_PERI_MSDC1_SW_RST 20 +#define MT8173_PERI_I2C0_SW_RST 22 +#define MT8173_PERI_I2C1_SW_RST 23 +#define MT8173_PERI_I2C2_SW_RST 24 +#define MT8173_PERI_I2C3_SW_RST 25 +#define MT8173_PERI_I2C4_SW_RST 26 +#define MT8173_PERI_HDMI_SW_RST 29 +#define MT8173_PERI_SPI0_SW_RST 33 + +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8173 */ -- cgit v1.2.3 From fa76a3db7093a527333c380df82a0f158d9b8299 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 9 Apr 2015 11:13:07 +0800 Subject: pinctrl: allow exlusive GPIO/mux pin allocation Disallow simultaneous use of the the GPIO and peripheral mux functions by setting a flag "strict" in struct pinctrl_desc. The blackfin pinmux and gpio controller doesn't allow user to set up a pin for both GPIO and peripheral function. So, add flag strict in struct pinctrl_desc to check both gpio_owner and mux_owner before approving the pin request. v2-changes: - if strict flag is set, check gpio_owner and mux_onwer in if and else clause v3-changes: - add kerneldoc for this struct - augment Documentation/pinctrl.txt Signed-off-by: Sonic Zhang Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 11 +++++++++++ drivers/pinctrl/pinctrl-adi2.c | 1 + drivers/pinctrl/pinmux.c | 13 +++++++++++++ include/linux/pinctrl/pinctrl.h | 3 +++ 4 files changed, 28 insertions(+) (limited to 'include') diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index a9b47163bb5d..d6b2bed94c43 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -73,6 +73,7 @@ static struct pinctrl_desc foo_desc = { .pins = foo_pins, .npins = ARRAY_SIZE(foo_pins), .owner = THIS_MODULE, + .strict = true, }; int __init foo_probe(void) @@ -830,6 +831,11 @@ separate memory range only intended for GPIO driving, and the register range dealing with pin config and pin multiplexing get placed into a different memory range and a separate section of the data sheet. +A flag "strict" in struct pinctrl_desc is available to check and deny +simultaneous access to the same pin from GPIO and pin multiplexing +consumers on hardware of this type. The pinctrl driver should set this flag +accordingly. + (B) pin config @@ -850,6 +856,11 @@ possible that the GPIO, pin config and pin multiplex registers are placed into the same memory range and the same section of the data sheet, although that need not be the case. +In some pin controllers, although the physical pins are designed in the same +way as (B), the GPIO function still can't be enabled at the same time as the +peripheral functions. So again the "strict" flag should be set, denying +simultaneous activation by GPIO and other muxed in devices. + From a kernel point of view, however, these are different aspects of the hardware and shall be put into different subsystems: diff --git a/drivers/pinctrl/pinctrl-adi2.c b/drivers/pinctrl/pinctrl-adi2.c index 8434439c5017..fbd492668da1 100644 --- a/drivers/pinctrl/pinctrl-adi2.c +++ b/drivers/pinctrl/pinctrl-adi2.c @@ -710,6 +710,7 @@ static struct pinctrl_desc adi_pinmux_desc = { .name = DRIVER_NAME, .pctlops = &adi_pctrl_ops, .pmxops = &adi_pinmux_ops, + .strict = true, .owner = THIS_MODULE, }; diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index b874458dcb88..2546fa783464 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -107,6 +107,13 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->gpio_owner, owner); goto out; } + if (pctldev->desc->strict && desc->mux_usecount && + strcmp(desc->mux_owner, owner)) { + dev_err(pctldev->dev, + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->mux_owner, owner); + goto out; + } desc->gpio_owner = owner; } else { @@ -116,6 +123,12 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->mux_owner, owner); goto out; } + if (pctldev->desc->strict && desc->gpio_owner) { + dev_err(pctldev->dev, + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->gpio_owner, owner); + goto out; + } desc->mux_usecount++; if (desc->mux_usecount > 1) diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 66e4697516de..fc6b0348c375 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -114,6 +114,8 @@ struct pinctrl_ops { * of the pins field above * @pctlops: pin control operation vtable, to support global concepts like * grouping of pins, this is optional. + * @strict: check both gpio_owner and mux_owner strictly before approving + the pin request * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver * @confops: pin config operations vtable, if you support pin configuration in * your driver @@ -132,6 +134,7 @@ struct pinctrl_desc { const struct pinctrl_ops *pctlops; const struct pinmux_ops *pmxops; const struct pinconf_ops *confops; + bool strict; struct module *owner; #ifdef CONFIG_GENERIC_PINCONF unsigned int num_custom_params; -- cgit v1.2.3 From 8c4c2016345feefcd289ce2479eb70286d30825a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 6 May 2015 14:19:13 +0200 Subject: pinctrl: move strict option to pinmux_ops While the pinmux_ops are ideally just a vtable for pin mux calls, the "strict" setting belongs so intuitively with the pin multiplexing that we should move it here anyway. Putting it in the top pinctrl_desc makes no sense. Cc: Sonic Zhang Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 2 +- drivers/pinctrl/pinctrl-adi2.c | 2 +- drivers/pinctrl/pinmux.c | 4 ++-- include/linux/pinctrl/pinctrl.h | 3 --- include/linux/pinctrl/pinmux.h | 4 ++++ 5 files changed, 8 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index d6b2bed94c43..4976389e432d 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -73,7 +73,6 @@ static struct pinctrl_desc foo_desc = { .pins = foo_pins, .npins = ARRAY_SIZE(foo_pins), .owner = THIS_MODULE, - .strict = true, }; int __init foo_probe(void) @@ -715,6 +714,7 @@ static struct pinmux_ops foo_pmxops = { .get_function_name = foo_get_fname, .get_function_groups = foo_get_groups, .set_mux = foo_set_mux, + .strict = true, }; /* Pinmux operations are handled by some pin controller */ diff --git a/drivers/pinctrl/pinctrl-adi2.c b/drivers/pinctrl/pinctrl-adi2.c index fbd492668da1..49df9037b41e 100644 --- a/drivers/pinctrl/pinctrl-adi2.c +++ b/drivers/pinctrl/pinctrl-adi2.c @@ -703,6 +703,7 @@ static struct pinmux_ops adi_pinmux_ops = { .get_function_name = adi_pinmux_get_func_name, .get_function_groups = adi_pinmux_get_groups, .gpio_request_enable = adi_pinmux_request_gpio, + .strict = true, }; @@ -710,7 +711,6 @@ static struct pinctrl_desc adi_pinmux_desc = { .name = DRIVER_NAME, .pctlops = &adi_pctrl_ops, .pmxops = &adi_pinmux_ops, - .strict = true, .owner = THIS_MODULE, }; diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 2546fa783464..c58c168b06c2 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -107,7 +107,7 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->gpio_owner, owner); goto out; } - if (pctldev->desc->strict && desc->mux_usecount && + if (ops->strict && desc->mux_usecount && strcmp(desc->mux_owner, owner)) { dev_err(pctldev->dev, "pin %s already requested by %s; cannot claim for %s\n", @@ -123,7 +123,7 @@ static int pin_request(struct pinctrl_dev *pctldev, desc->name, desc->mux_owner, owner); goto out; } - if (pctldev->desc->strict && desc->gpio_owner) { + if (ops->strict && desc->gpio_owner) { dev_err(pctldev->dev, "pin %s already requested by %s; cannot claim for %s\n", desc->name, desc->gpio_owner, owner); diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index fc6b0348c375..66e4697516de 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -114,8 +114,6 @@ struct pinctrl_ops { * of the pins field above * @pctlops: pin control operation vtable, to support global concepts like * grouping of pins, this is optional. - * @strict: check both gpio_owner and mux_owner strictly before approving - the pin request * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver * @confops: pin config operations vtable, if you support pin configuration in * your driver @@ -134,7 +132,6 @@ struct pinctrl_desc { const struct pinctrl_ops *pctlops; const struct pinmux_ops *pmxops; const struct pinconf_ops *confops; - bool strict; struct module *owner; #ifdef CONFIG_GENERIC_PINCONF unsigned int num_custom_params; diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 511bda9ed4bf..d3740fa7073f 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -56,6 +56,9 @@ struct pinctrl_dev; * depending on whether the GPIO is configured as input or output, * a direction selector function may be implemented as a backing * to the GPIO controllers that need pin muxing. + * @strict: do not allow simultaneous use of the same pin for GPIO and another + * function. Check both gpio_owner and mux_owner strictly before approving + * the pin request. */ struct pinmux_ops { int (*request) (struct pinctrl_dev *pctldev, unsigned offset); @@ -79,6 +82,7 @@ struct pinmux_ops { struct pinctrl_gpio_range *range, unsigned offset, bool input); + bool strict; }; #endif /* CONFIG_PINMUX */ -- cgit v1.2.3 From 66eb3bd857f5311f72c7c371f78ddc9c472befba Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Mon, 27 Apr 2015 18:04:05 +0200 Subject: pinctrl: use ERR_CAST instead of ERR_PTR/PTR_ERR Inspired by scripts/coccinelle/api/err_cast.cocci Signed-off-by: Fabian Frederick Signed-off-by: Linus Walleij --- include/linux/pinctrl/consumer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 18eccefea06e..d7e5d608faa7 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -142,7 +142,7 @@ static inline struct pinctrl * __must_check pinctrl_get_select( s = pinctrl_lookup_state(p, name); if (IS_ERR(s)) { pinctrl_put(p); - return ERR_PTR(PTR_ERR(s)); + return ERR_CAST(s); } ret = pinctrl_select_state(p, s); -- cgit v1.2.3 From 5967cb3d87802908fe5ab96aa0b417606bf4ca3b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 1 May 2015 12:37:23 +0100 Subject: ASoC: Correct typo in SOC_VALUE_ENUM_SINGLE macro xnitmes is clearly intended to be xnitems, but all other macros just refer to this as xitems, so change it to that. Signed-off-by: Charles Keepax Reviewed-by: Lars-Peter Clausen Tested-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 7781bfe85c5d..b257a09a98d1 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -190,8 +190,8 @@ #define SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xitems, xtexts, xvalues) \ { .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \ .mask = xmask, .items = xitems, .texts = xtexts, .values = xvalues} -#define SOC_VALUE_ENUM_SINGLE(xreg, xshift, xmask, xnitmes, xtexts, xvalues) \ - SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xnitmes, xtexts, xvalues) +#define SOC_VALUE_ENUM_SINGLE(xreg, xshift, xmask, xitems, xtexts, xvalues) \ + SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xitems, xtexts, xvalues) #define SOC_ENUM_SINGLE_VIRT(xitems, xtexts) \ SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, xitems, xtexts) #define SOC_ENUM(xname, xenum) \ -- cgit v1.2.3 From 561ed680b764b288feeb74a24e1d9fb3da98ec7b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 1 May 2015 12:37:26 +0100 Subject: ASoC: dapm: Add support for autodisable mux controls Commit 57295073b6ac ("ASoC: dapm: Implement mixer input auto-disable") added support for autodisable controls, controls whose values are only written to the hardware when their respective widgets are powered up. But it only added support for controls based on the mixer abstraction. This patch add support for mux controls (DAPM controls based on the enum abstraction) to be auto-disabled as well. As each mux can only have a single control, there is no need to tie the autodisable widget to the inputs (as is done for the mixer controls) it can be tided directly to the mux widget itself. Note that it is assumed that the first entry in a autodisable mux control will always represent the off state for the mux and is what the mux will be set to whilst it is disabled. Signed-off-by: Charles Keepax Reviewed-by: Lars-Peter Clausen Tested-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc.h | 10 +++++++ sound/soc/soc-dapm.c | 78 +++++++++++++++++++++++++++++++++++++++------------- 2 files changed, 69 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index b257a09a98d1..2f2e59e1513e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -192,6 +192,10 @@ .mask = xmask, .items = xitems, .texts = xtexts, .values = xvalues} #define SOC_VALUE_ENUM_SINGLE(xreg, xshift, xmask, xitems, xtexts, xvalues) \ SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xitems, xtexts, xvalues) +#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE(xreg, xshift, xmask, xitems, xtexts, xvalues) \ +{ .reg = xreg, .shift_l = xshift, .shift_r = xshift, \ + .mask = xmask, .items = xitems, .texts = xtexts, \ + .values = xvalues, .autodisable = 1} #define SOC_ENUM_SINGLE_VIRT(xitems, xtexts) \ SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, xitems, xtexts) #define SOC_ENUM(xname, xenum) \ @@ -312,6 +316,11 @@ ARRAY_SIZE(xtexts), xtexts, xvalues) #define SOC_VALUE_ENUM_SINGLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \ SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xmask, xtexts, xvalues) + +#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \ + const struct soc_enum name = SOC_VALUE_ENUM_SINGLE_AUTODISABLE(xreg, \ + xshift, xmask, ARRAY_SIZE(xtexts), xtexts, xvalues) + #define SOC_ENUM_SINGLE_VIRT_DECL(name, xtexts) \ const struct soc_enum name = SOC_ENUM_SINGLE_VIRT(ARRAY_SIZE(xtexts), xtexts) @@ -1188,6 +1197,7 @@ struct soc_enum { unsigned int mask; const char * const *texts; const unsigned int *values; + unsigned int autodisable:1; }; /** diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a0d97f89eb75..79e6cf4b7de1 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -308,6 +308,7 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, { struct dapm_kcontrol_data *data; struct soc_mixer_control *mc; + struct soc_enum *e; const char *name; int ret; @@ -355,6 +356,41 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, } } break; + case snd_soc_dapm_mux: + e = (struct soc_enum *)kcontrol->private_value; + + if (e->autodisable) { + struct snd_soc_dapm_widget template; + + name = kasprintf(GFP_KERNEL, "%s %s", kcontrol->id.name, + "Autodisable"); + if (!name) { + ret = -ENOMEM; + goto err_data; + } + + memset(&template, 0, sizeof(template)); + template.reg = e->reg; + template.mask = e->mask << e->shift_l; + template.shift = e->shift_l; + template.off_val = snd_soc_enum_item_to_val(e, 0); + template.on_val = template.off_val; + template.id = snd_soc_dapm_kcontrol; + template.name = name; + + data->value = template.on_val; + + data->widget = snd_soc_dapm_new_control(widget->dapm, + &template); + if (!data->widget) { + ret = -ENOMEM; + goto err_name; + } + + snd_soc_dapm_add_path(widget->dapm, data->widget, + widget, NULL, NULL); + } + break; default: break; } @@ -418,11 +454,6 @@ static void dapm_kcontrol_add_path(const struct snd_kcontrol *kcontrol, struct dapm_kcontrol_data *data = snd_kcontrol_chip(kcontrol); list_add_tail(&path->list_kcontrol, &data->paths); - - if (data->widget) { - snd_soc_dapm_add_path(data->widget->dapm, data->widget, - path->source, NULL, NULL); - } } static bool dapm_kcontrol_is_powered(const struct snd_kcontrol *kcontrol) @@ -820,6 +851,7 @@ static int dapm_new_mixer(struct snd_soc_dapm_widget *w) { int i, ret; struct snd_soc_dapm_path *path; + struct dapm_kcontrol_data *data; /* add kcontrol */ for (i = 0; i < w->num_kcontrols; i++) { @@ -829,16 +861,20 @@ static int dapm_new_mixer(struct snd_soc_dapm_widget *w) if (path->name != (char *)w->kcontrol_news[i].name) continue; - if (w->kcontrols[i]) { - dapm_kcontrol_add_path(w->kcontrols[i], path); - continue; + if (!w->kcontrols[i]) { + ret = dapm_create_or_share_mixmux_kcontrol(w, i); + if (ret < 0) + return ret; } - ret = dapm_create_or_share_mixmux_kcontrol(w, i); - if (ret < 0) - return ret; - dapm_kcontrol_add_path(w->kcontrols[i], path); + + data = snd_kcontrol_chip(w->kcontrols[i]); + if (data->widget) + snd_soc_dapm_add_path(data->widget->dapm, + data->widget, + path->source, + NULL, NULL); } } @@ -2945,16 +2981,19 @@ int snd_soc_dapm_get_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kcontrol); + struct snd_soc_card *card = dapm->card; struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; unsigned int reg_val, val; - if (e->reg != SND_SOC_NOPM) { + mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + if (e->reg != SND_SOC_NOPM && dapm_kcontrol_is_powered(kcontrol)) { int ret = soc_dapm_read(dapm, e->reg, ®_val); if (ret) return ret; } else { reg_val = dapm_kcontrol_get_value(kcontrol); } + mutex_unlock(&card->dapm_mutex); val = (reg_val >> e->shift_l) & e->mask; ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(e, val); @@ -2984,7 +3023,7 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, struct snd_soc_card *card = dapm->card; struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; unsigned int *item = ucontrol->value.enumerated.item; - unsigned int val, change; + unsigned int val, change, reg_change = 0; unsigned int mask; struct snd_soc_dapm_update update; int ret = 0; @@ -3003,19 +3042,20 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + change = dapm_kcontrol_set_value(kcontrol, val); + if (e->reg != SND_SOC_NOPM) - change = soc_dapm_test_bits(dapm, e->reg, mask, val); - else - change = dapm_kcontrol_set_value(kcontrol, val); + reg_change = soc_dapm_test_bits(dapm, e->reg, mask, val); - if (change) { - if (e->reg != SND_SOC_NOPM) { + if (change || reg_change) { + if (reg_change) { update.kcontrol = kcontrol; update.reg = e->reg; update.mask = mask; update.val = val; card->update = &update; } + change |= reg_change; ret = soc_dapm_mux_update_power(card, kcontrol, item[0], e); -- cgit v1.2.3 From d714f97c5b8c4c5da56b89a7289acb3f12ef7abb Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 1 May 2015 18:02:43 +0200 Subject: ASoC: dapm: Add demux support A demux is conceptually similar to a mux. Where a mux has multiple input and one output and selects one of the inputs to be connected to the output, the demux has one input and multiple outputs and selects one of the outputs to which the input gets connected. This similarity makes it straight forward to support them in DAPM using the existing mux support, we only need to swap sinks and sources when initially setting up the paths. The only slightly tricky part is that there can only be one control per path. Since mixers/muxes are at the sink of a path and a demux is at the source and both types want a control it is not possible to directly connect a demux output to a mixer/mux input. The patch adds some sanity checks to make sure that this does not happen. Drivers who want to model hardware which directly connects a demux output to a mixer/mux input can do this by inserting a dummy widget between the two. E.g.: { "Dummy", "Demux Control", "Demux" }, { "Mixer", "Mixer Control", "Dummy" }, Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 5 +++ sound/soc/soc-dapm.c | 112 ++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 102 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 70216d20e897..96c5e0ec81d1 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -107,6 +107,10 @@ struct device; { .id = snd_soc_dapm_mux, .name = wname, \ SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} +#define SND_SOC_DAPM_DEMUX(wname, wreg, wshift, winvert, wcontrols) \ +{ .id = snd_soc_dapm_demux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1} /* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */ #define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\ @@ -452,6 +456,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_input = 0, /* input pin */ snd_soc_dapm_output, /* output pin */ snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */ + snd_soc_dapm_demux, /* connects the input to one of multiple outputs */ snd_soc_dapm_mixer, /* mixes several analog signals together */ snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */ snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 5c159f4f8097..a2e5f2278caa 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -70,6 +70,7 @@ static int dapm_up_seq[] = { [snd_soc_dapm_aif_out] = 4, [snd_soc_dapm_mic] = 5, [snd_soc_dapm_mux] = 6, + [snd_soc_dapm_demux] = 6, [snd_soc_dapm_dac] = 7, [snd_soc_dapm_switch] = 8, [snd_soc_dapm_mixer] = 8, @@ -100,6 +101,7 @@ static int dapm_down_seq[] = { [snd_soc_dapm_mic] = 7, [snd_soc_dapm_micbias] = 8, [snd_soc_dapm_mux] = 9, + [snd_soc_dapm_demux] = 9, [snd_soc_dapm_aif_in] = 10, [snd_soc_dapm_aif_out] = 10, [snd_soc_dapm_dai_in] = 10, @@ -356,6 +358,7 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, } } break; + case snd_soc_dapm_demux: case snd_soc_dapm_mux: e = (struct soc_enum *)kcontrol->private_value; @@ -639,9 +642,10 @@ out: /* connect mux widget to its interconnecting audio paths */ static int dapm_connect_mux(struct snd_soc_dapm_context *dapm, - struct snd_soc_dapm_path *path, const char *control_name) + struct snd_soc_dapm_path *path, const char *control_name, + struct snd_soc_dapm_widget *w) { - const struct snd_kcontrol_new *kcontrol = &path->sink->kcontrol_news[0]; + const struct snd_kcontrol_new *kcontrol = &w->kcontrol_news[0]; struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; unsigned int val, item; int i; @@ -781,6 +785,7 @@ static int dapm_create_or_share_mixmux_kcontrol(struct snd_soc_dapm_widget *w, wname_in_long_name = false; kcname_in_long_name = true; break; + case snd_soc_dapm_demux: case snd_soc_dapm_mux: wname_in_long_name = true; kcname_in_long_name = false; @@ -886,17 +891,32 @@ static int dapm_new_mux(struct snd_soc_dapm_widget *w) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_dapm_path *path; + struct list_head *paths; + const char *type; int ret; + switch (w->id) { + case snd_soc_dapm_mux: + paths = &w->sources; + type = "mux"; + break; + case snd_soc_dapm_demux: + paths = &w->sinks; + type = "demux"; + break; + default: + return -EINVAL; + } + if (w->num_kcontrols != 1) { dev_err(dapm->dev, - "ASoC: mux %s has incorrect number of controls\n", + "ASoC: %s %s has incorrect number of controls\n", type, w->name); return -EINVAL; } - if (list_empty(&w->sources)) { - dev_err(dapm->dev, "ASoC: mux %s has no paths\n", w->name); + if (list_empty(paths)) { + dev_err(dapm->dev, "ASoC: %s %s has no paths\n", type, w->name); return -EINVAL; } @@ -904,9 +924,16 @@ static int dapm_new_mux(struct snd_soc_dapm_widget *w) if (ret < 0) return ret; - list_for_each_entry(path, &w->sources, list_sink) { - if (path->name) - dapm_kcontrol_add_path(w->kcontrols[0], path); + if (w->id == snd_soc_dapm_mux) { + list_for_each_entry(path, &w->sources, list_sink) { + if (path->name) + dapm_kcontrol_add_path(w->kcontrols[0], path); + } + } else { + list_for_each_entry(path, &w->sinks, list_source) { + if (path->name) + dapm_kcontrol_add_path(w->kcontrols[0], path); + } } return 0; @@ -2414,6 +2441,50 @@ static void dapm_update_widget_flags(struct snd_soc_dapm_widget *w) } } +static int snd_soc_dapm_check_dynamic_path(struct snd_soc_dapm_context *dapm, + struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink, + const char *control) +{ + bool dynamic_source = false; + bool dynamic_sink = false; + + if (!control) + return 0; + + switch (source->id) { + case snd_soc_dapm_demux: + dynamic_source = true; + break; + default: + break; + } + + switch (sink->id) { + case snd_soc_dapm_mux: + case snd_soc_dapm_switch: + case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: + dynamic_sink = true; + break; + default: + break; + } + + if (dynamic_source && dynamic_sink) { + dev_err(dapm->dev, + "Direct connection between demux and mixer/mux not supported for path %s -> [%s] -> %s\n", + source->name, control, sink->name); + return -EINVAL; + } else if (!dynamic_source && !dynamic_sink) { + dev_err(dapm->dev, + "Control not supported for path %s -> [%s] -> %s\n", + source->name, control, sink->name); + return -EINVAL; + } + + return 0; +} + static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, struct snd_soc_dapm_widget *wsource, struct snd_soc_dapm_widget *wsink, const char *control, @@ -2444,6 +2515,10 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, return -EINVAL; } + ret = snd_soc_dapm_check_dynamic_path(dapm, wsource, wsink, control); + if (ret) + return ret; + path = kzalloc(sizeof(struct snd_soc_dapm_path), GFP_KERNEL); if (!path) return -ENOMEM; @@ -2463,10 +2538,19 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, if (control == NULL) { path->connect = 1; } else { - /* connect dynamic paths */ + switch (wsource->id) { + case snd_soc_dapm_demux: + ret = dapm_connect_mux(dapm, path, control, wsource); + if (ret) + goto err; + break; + default: + break; + } + switch (wsink->id) { case snd_soc_dapm_mux: - ret = dapm_connect_mux(dapm, path, control); + ret = dapm_connect_mux(dapm, path, control, wsink); if (ret != 0) goto err; break; @@ -2478,11 +2562,7 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, goto err; break; default: - dev_err(dapm->dev, - "Control not supported for path %s -> [%s] -> %s\n", - wsource->name, control, wsink->name); - ret = -EINVAL; - goto err; + break; } } @@ -2815,6 +2895,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_card *card) dapm_new_mixer(w); break; case snd_soc_dapm_mux: + case snd_soc_dapm_demux: dapm_new_mux(w); break; case snd_soc_dapm_pga: @@ -3219,6 +3300,7 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, w->power_check = dapm_always_on_check_power; break; case snd_soc_dapm_mux: + case snd_soc_dapm_demux: case snd_soc_dapm_switch: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl: -- cgit v1.2.3 From ac4fc3eeb79e06499779db99937522526e863ab6 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Tue, 5 May 2015 21:42:01 +0800 Subject: ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- include/sound/rt5645.h | 3 -- sound/soc/codecs/rt5645.c | 124 ++++++++++++++++++++++------------------------ sound/soc/codecs/rt5645.h | 2 + 3 files changed, 61 insertions(+), 68 deletions(-) (limited to 'include') diff --git a/include/sound/rt5645.h b/include/sound/rt5645.h index 120d9610054e..652cb9e4afe5 100644 --- a/include/sound/rt5645.h +++ b/include/sound/rt5645.h @@ -15,7 +15,6 @@ struct rt5645_platform_data { /* IN2 can optionally be differential */ bool in2_diff; - bool dmic_en; unsigned int dmic1_data_pin; /* 0 = IN2N; 1 = GPIO5; 2 = GPIO11 */ unsigned int dmic2_data_pin; @@ -24,8 +23,6 @@ struct rt5645_platform_data { unsigned int hp_det_gpio; bool gpio_hp_det_active_high; - /* true if codec's jd function is used */ - bool en_jd_func; unsigned int jd_mode; }; diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index a72d9893c209..e4356809f1b9 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2968,7 +2968,7 @@ static int rt5645_probe(struct snd_soc_codec *codec) snd_soc_update_bits(codec, RT5645_CHARGE_PUMP, 0x0300, 0x0200); /* for JD function */ - if (rt5645->pdata.en_jd_func) { + if (rt5645->pdata.jd_mode) { snd_soc_dapm_force_enable_pin(&codec->dapm, "JD Power"); snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2"); snd_soc_dapm_sync(&codec->dapm); @@ -3111,10 +3111,8 @@ MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match); static struct rt5645_platform_data *rt5645_pdata; static struct rt5645_platform_data strago_platform_data = { - .dmic_en = true, - .dmic1_data_pin = -1, + .dmic1_data_pin = RT5645_DMIC1_DISABLE, .dmic2_data_pin = RT5645_DMIC_DATA_IN2P, - .en_jd_func = true, .jd_mode = 3, }; @@ -3214,83 +3212,79 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt5645->regmap, RT5645_IN2_CTRL, RT5645_IN_DF2, RT5645_IN_DF2); - if (rt5645->pdata.dmic_en) { + if (rt5645->pdata.dmic1_data_pin || rt5645->pdata.dmic2_data_pin) { regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, RT5645_GP2_PIN_MASK, RT5645_GP2_PIN_DMIC1_SCL); + } + switch (rt5645->pdata.dmic1_data_pin) { + case RT5645_DMIC_DATA_IN2N: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_IN2N); + break; - switch (rt5645->pdata.dmic1_data_pin) { - case RT5645_DMIC_DATA_IN2N: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_IN2N); - break; - - case RT5645_DMIC_DATA_GPIO5: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO5); - regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, - RT5645_GP5_PIN_MASK, RT5645_GP5_PIN_DMIC1_SDA); - break; - - case RT5645_DMIC_DATA_GPIO11: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO11); - regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, - RT5645_GP11_PIN_MASK, - RT5645_GP11_PIN_DMIC1_SDA); - break; + case RT5645_DMIC_DATA_GPIO5: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO5); + regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, + RT5645_GP5_PIN_MASK, RT5645_GP5_PIN_DMIC1_SDA); + break; - default: - break; - } + case RT5645_DMIC_DATA_GPIO11: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO11); + regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, + RT5645_GP11_PIN_MASK, + RT5645_GP11_PIN_DMIC1_SDA); + break; - switch (rt5645->pdata.dmic2_data_pin) { - case RT5645_DMIC_DATA_IN2P: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_IN2P); - break; + default: + break; + } - case RT5645_DMIC_DATA_GPIO6: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO6); - regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, - RT5645_GP6_PIN_MASK, RT5645_GP6_PIN_DMIC2_SDA); - break; + switch (rt5645->pdata.dmic2_data_pin) { + case RT5645_DMIC_DATA_IN2P: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_IN2P); + break; - case RT5645_DMIC_DATA_GPIO10: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO10); - regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, - RT5645_GP10_PIN_MASK, - RT5645_GP10_PIN_DMIC2_SDA); - break; + case RT5645_DMIC_DATA_GPIO6: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO6); + regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, + RT5645_GP6_PIN_MASK, RT5645_GP6_PIN_DMIC2_SDA); + break; - case RT5645_DMIC_DATA_GPIO12: - regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, - RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12); - regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, - RT5645_GP12_PIN_MASK, - RT5645_GP12_PIN_DMIC2_SDA); - break; + case RT5645_DMIC_DATA_GPIO10: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO10); + regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, + RT5645_GP10_PIN_MASK, + RT5645_GP10_PIN_DMIC2_SDA); + break; - default: - break; - } + case RT5645_DMIC_DATA_GPIO12: + regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1, + RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12); + regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1, + RT5645_GP12_PIN_MASK, + RT5645_GP12_PIN_DMIC2_SDA); + break; + default: + break; } - if (rt5645->pdata.en_jd_func) { + if (rt5645->pdata.jd_mode) { regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3, - RT5645_IRQ_CLK_GATE_CTRL, RT5645_IRQ_CLK_GATE_CTRL); + RT5645_IRQ_CLK_GATE_CTRL, + RT5645_IRQ_CLK_GATE_CTRL); regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, - RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN); + RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN); regmap_update_bits(rt5645->regmap, RT5645_JD_CTRL3, - RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL, - RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL); + RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL, + RT5645_JD_CBJ_EN | RT5645_JD_CBJ_POL); regmap_update_bits(rt5645->regmap, RT5645_MICBIAS, - RT5645_IRQ_CLK_INT, RT5645_IRQ_CLK_INT); - } - - if (rt5645->pdata.jd_mode) { + RT5645_IRQ_CLK_INT, RT5645_IRQ_CLK_INT); regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, RT5645_IRQ_JD_1_1_EN, RT5645_IRQ_JD_1_1_EN); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3, diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index c204861d31d9..9ec4e899795d 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -2145,6 +2145,7 @@ enum { }; enum { + RT5645_DMIC1_DISABLE, RT5645_DMIC_DATA_IN2P, RT5645_DMIC_DATA_GPIO6, RT5645_DMIC_DATA_GPIO10, @@ -2152,6 +2153,7 @@ enum { }; enum { + RT5645_DMIC2_DISABLE, RT5645_DMIC_DATA_IN2N, RT5645_DMIC_DATA_GPIO5, RT5645_DMIC_DATA_GPIO11, -- cgit v1.2.3 From 1d6b98774cff82860a3f044610e956bcbff556c1 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Tue, 31 Mar 2015 15:55:57 +0200 Subject: tty: constify return type of tty_name All users of tty_name pass the result directly to a printf-like function. This means we can actually let tty_name return the literal "NULL tty" or tty->name directly, avoiding the strcpy and a lot of medium-sized stack buffers. In preparation for that, make the return type const char*. While at it, we can also constify the tty parameter. Signed-off-by: Rasmus Villemoes Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 2 +- include/linux/tty.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index e5695467598f..5a49a4a80ebd 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -243,7 +243,7 @@ static void tty_del_file(struct file *file) * Locking: none */ -char *tty_name(struct tty_struct *tty, char *buf) +const char *tty_name(const struct tty_struct *tty, char *buf) { if (!tty) /* Hmm. NULL pointer. That's fun. */ strcpy(buf, "NULL tty"); diff --git a/include/linux/tty.h b/include/linux/tty.h index fe5623c9af71..4cbecfc7b3c9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -421,7 +421,7 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); -extern char *tty_name(struct tty_struct *tty, char *buf); +extern const char *tty_name(const struct tty_struct *tty, char *buf); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int tty_check_change(struct tty_struct *tty); extern void __stop_tty(struct tty_struct *tty); -- cgit v1.2.3 From 429b474990cb4e5e8cfe2352daf649d0599cccb6 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Tue, 31 Mar 2015 15:55:59 +0200 Subject: tty: remove buf parameter from tty_name() tty_name no longer uses the buf parameter, so remove it along with all the 64 byte stack buffers that used to be passed in. Mostly generated by the coccinelle script @depends on patch@ identifier buf; constant C; expression tty; @@ - char buf[C]; <+... - tty_name(tty, buf) + tty_name(tty) ...+> allmodconfig compiles, so I'm fairly confident the stack buffers weren't used for other purposes as well. Signed-off-by: Rasmus Villemoes Reviewed-by: Peter Hurley Acked-by: Jesper Nilsson Acked-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/serio/serport.c | 5 ++--- drivers/tty/amiserial.c | 8 ++------ drivers/tty/cyclades.c | 8 ++------ drivers/tty/n_gsm.c | 3 +-- drivers/tty/n_tty.c | 7 ++----- drivers/tty/serial/crisv10.c | 8 ++------ drivers/tty/serial/serial_core.c | 4 +--- drivers/tty/tty_io.c | 28 +++++++++++----------------- drivers/tty/tty_ioctl.c | 4 +--- drivers/tty/tty_ldisc.c | 8 +++----- include/linux/tty.h | 2 +- 11 files changed, 28 insertions(+), 57 deletions(-) (limited to 'include') diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 69175b825346..9c927d35c1f5 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -167,7 +167,6 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u { struct serport *serport = (struct serport*) tty->disc_data; struct serio *serio; - char name[64]; if (test_and_set_bit(SERPORT_BUSY, &serport->flags)) return -EBUSY; @@ -177,7 +176,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u return -ENOMEM; strlcpy(serio->name, "Serial port", sizeof(serio->name)); - snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name)); + snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty)); serio->id = serport->id; serio->id.type = SERIO_RS232; serio->write = serport_serio_write; @@ -187,7 +186,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u serio->dev.parent = tty->dev; serio_register_port(serport->serio); - printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name)); + printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty)); wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags)); serio_unregister_port(serport->serio); diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index b2d760055952..894d3a84e285 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -966,9 +966,7 @@ static void rs_throttle(struct tty_struct * tty) struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), + printk("throttle %s: %d....\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty)); #endif @@ -991,9 +989,7 @@ static void rs_unthrottle(struct tty_struct * tty) struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", tty_name(tty, buf), + printk("unthrottle %s: %d....\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty)); #endif diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index fd66f57390d0..87f6578c6f4a 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -2861,9 +2861,7 @@ static void cy_throttle(struct tty_struct *tty) unsigned long flags; #ifdef CY_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), + printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty), info->line); #endif @@ -2902,10 +2900,8 @@ static void cy_unthrottle(struct tty_struct *tty) unsigned long flags; #ifdef CY_DEBUG_THROTTLE - char buf[64]; - printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", - tty_name(tty, buf), tty_chars_in_buffer(tty), info->line); + tty_name(tty), tty_chars_in_buffer(tty), info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 91abc00aa833..7e039669fc82 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2274,7 +2274,6 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, const unsigned char *dp; char *f; int i; - char buf[64]; char flags = TTY_NORMAL; if (debug & 4) @@ -2296,7 +2295,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, break; default: WARN_ONCE(1, "%s: unknown flag %d\n", - tty_name(tty, buf), flags); + tty_name(tty), flags); break; } } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cf6e0f2e1331..54da8f49394d 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1179,13 +1179,12 @@ static void n_tty_receive_break(struct tty_struct *tty) static void n_tty_receive_overrun(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - char buf[64]; ldata->num_overrun++; if (time_after(jiffies, ldata->overrun_time + HZ) || time_after(ldata->overrun_time, jiffies)) { printk(KERN_WARNING "%s: %d input overrun(s)\n", - tty_name(tty, buf), + tty_name(tty), ldata->num_overrun); ldata->overrun_time = jiffies; ldata->num_overrun = 0; @@ -1460,8 +1459,6 @@ static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) static void n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) { - char buf[64]; - switch (flag) { case TTY_BREAK: n_tty_receive_break(tty); @@ -1475,7 +1472,7 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) break; default: printk(KERN_ERR "%s: unknown flag %d\n", - tty_name(tty, buf), flag); + tty_name(tty), flag); break; } } diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 0c1825b0b41d..568ea0d2d699 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3216,9 +3216,7 @@ rs_throttle(struct tty_struct * tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %lu....\n", tty_name(tty, buf), + printk("throttle %s: %lu....\n", tty_name(tty), (unsigned long)tty->ldisc.chars_in_buffer(tty)); #endif DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); @@ -3238,9 +3236,7 @@ rs_unthrottle(struct tty_struct * tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %lu....\n", tty_name(tty, buf), + printk("unthrottle %s: %lu....\n", tty_name(tty), (unsigned long)tty->ldisc.chars_in_buffer(tty)); #endif DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0b7bb12dfc68..eec067d8eedb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -894,12 +894,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, * need to rate-limit; it's CAP_SYS_ADMIN only. */ if (uport->flags & UPF_SPD_MASK) { - char buf[64]; - dev_notice(uport->dev, "%s sets custom speed on %s. This is deprecated.\n", current->comm, - tty_name(port->tty, buf)); + tty_name(port->tty)); } uart_change_speed(tty, state, NULL); } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 1eaf0fbd99e4..57fc6ee12332 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -235,7 +235,6 @@ static void tty_del_file(struct file *file) /** * tty_name - return tty naming * @tty: tty structure - * @buf: unused * * Convert a tty structure into a name. The name reflects the kernel * naming policy and if udev is in use may not reflect user space @@ -243,7 +242,7 @@ static void tty_del_file(struct file *file) * Locking: none */ -const char *tty_name(const struct tty_struct *tty, char *buf) +const char *tty_name(const struct tty_struct *tty) { if (!tty) /* Hmm. NULL pointer. That's fun. */ return "NULL tty"; @@ -768,8 +767,7 @@ static void do_tty_hangup(struct work_struct *work) void tty_hangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s hangup...\n", tty_name(tty)); #endif schedule_work(&tty->hangup_work); } @@ -788,9 +786,7 @@ EXPORT_SYMBOL(tty_hangup); void tty_vhangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - - printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty)); #endif __tty_hangup(tty, 0); } @@ -829,9 +825,7 @@ void tty_vhangup_self(void) static void tty_vhangup_session(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - - printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty)); #endif __tty_hangup(tty, 1); } @@ -1767,7 +1761,6 @@ int tty_release(struct inode *inode, struct file *filp) struct tty_struct *o_tty = NULL; int do_sleep, final; int idx; - char buf[64]; long timeout = 0; int once = 1; @@ -1791,7 +1784,7 @@ int tty_release(struct inode *inode, struct file *filp) #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__, - tty_name(tty, buf), tty->count); + tty_name(tty), tty->count); #endif if (tty->ops->close) @@ -1842,7 +1835,7 @@ int tty_release(struct inode *inode, struct file *filp) if (once) { once = 0; printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", - __func__, tty_name(tty, buf)); + __func__, tty_name(tty)); } schedule_timeout_killable(timeout); if (timeout < 120 * HZ) @@ -1854,13 +1847,13 @@ int tty_release(struct inode *inode, struct file *filp) if (o_tty) { if (--o_tty->count < 0) { printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n", - __func__, o_tty->count, tty_name(o_tty, buf)); + __func__, o_tty->count, tty_name(o_tty)); o_tty->count = 0; } } if (--tty->count < 0) { printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n", - __func__, tty->count, tty_name(tty, buf)); + __func__, tty->count, tty_name(tty)); tty->count = 0; } @@ -1903,7 +1896,7 @@ int tty_release(struct inode *inode, struct file *filp) return 0; #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty, buf)); + printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty)); #endif /* * Ask the line discipline code to release its structures @@ -1914,7 +1907,8 @@ int tty_release(struct inode *inode, struct file *filp) tty_flush_works(tty); #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, tty_name(tty, buf)); + printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, + tty_name(tty)); #endif /* * The release_tty function takes care of the details of clearing diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 8e53fe469664..5232fb60b0b1 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -211,9 +211,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) void tty_wait_until_sent(struct tty_struct *tty, long timeout) { #ifdef TTY_DEBUG_WAIT_UNTIL_SENT - char buf[64]; - - printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty)); #endif if (!timeout) timeout = MAX_SCHEDULE_TIMEOUT; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 3737f55272d2..c07fb5d9bcf9 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -22,9 +22,8 @@ #undef LDISC_DEBUG_HANGUP #ifdef LDISC_DEBUG_HANGUP -#define tty_ldisc_debug(tty, f, args...) ({ \ - char __b[64]; \ - printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty, __b), ##args); \ +#define tty_ldisc_debug(tty, f, args...) ({ \ + printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty), ##args); \ }) #else #define tty_ldisc_debug(tty, f, args...) @@ -483,7 +482,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { - char buf[64]; struct tty_ldisc *new_ldisc; int r; @@ -504,7 +502,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) if (r < 0) panic("Couldn't open N_TTY ldisc for " "%s --- error %d.", - tty_name(tty, buf), r); + tty_name(tty), r); } } diff --git a/include/linux/tty.h b/include/linux/tty.h index 4cbecfc7b3c9..9a72c9144d8a 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -421,7 +421,7 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); -extern const char *tty_name(const struct tty_struct *tty, char *buf); +extern const char *tty_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int tty_check_change(struct tty_struct *tty); extern void __stop_tty(struct tty_struct *tty); -- cgit v1.2.3 From 6b3cddccf4eec0883feb065aea28dd9770bb17d0 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sat, 11 Apr 2015 11:02:36 -0400 Subject: serial: core: Fix unused variable warnings from uart_console() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_SERIAL_CORE_CONSOLE=n, build warnings are generated by uart_console() macro expansion: drivers/tty/serial/of_serial.c: In function ‘of_serial_suspend_8250’: drivers/tty/serial/of_serial.c:262:20: warning: unused variable ‘port’ [-Wunused-variable] struct uart_port *port = &port8250->port; ^ drivers/tty/serial/of_serial.c: In function ‘of_serial_resume_8250’: drivers/tty/serial/of_serial.c:272:20: warning: unused variable ‘port’ [-Wunused-variable] struct uart_port *port = &port8250->port; Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 025dad9dcde4..297d4fa1cfe5 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -35,7 +35,7 @@ #define uart_console(port) \ ((port)->cons && (port)->cons->index == (port)->line) #else -#define uart_console(port) (0) +#define uart_console(port) ({ (void)port; 0; }) #endif struct uart_port; -- cgit v1.2.3 From 5d799881391277e52787df06bafe865e91ae8296 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 22 Apr 2015 16:07:38 -0700 Subject: f2fs: export more enums for tracepoint This patch exports newly added enums to userspace. Signed-off-by: Jaegeuk Kim --- include/trace/events/f2fs.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h index e202dec22e1d..7a61ccc90a9c 100644 --- a/include/trace/events/f2fs.h +++ b/include/trace/events/f2fs.h @@ -13,6 +13,10 @@ TRACE_DEFINE_ENUM(NODE); TRACE_DEFINE_ENUM(DATA); TRACE_DEFINE_ENUM(META); TRACE_DEFINE_ENUM(META_FLUSH); +TRACE_DEFINE_ENUM(INMEM); +TRACE_DEFINE_ENUM(INMEM_DROP); +TRACE_DEFINE_ENUM(IPU); +TRACE_DEFINE_ENUM(OPU); TRACE_DEFINE_ENUM(CURSEG_HOT_DATA); TRACE_DEFINE_ENUM(CURSEG_WARM_DATA); TRACE_DEFINE_ENUM(CURSEG_COLD_DATA); @@ -37,6 +41,7 @@ TRACE_DEFINE_ENUM(__REQ_META); TRACE_DEFINE_ENUM(CP_UMOUNT); TRACE_DEFINE_ENUM(CP_FASTBOOT); TRACE_DEFINE_ENUM(CP_SYNC); +TRACE_DEFINE_ENUM(CP_RECOVERY); TRACE_DEFINE_ENUM(CP_DISCARD); #define show_block_type(type) \ -- cgit v1.2.3 From 385f83f85cd9428db82cae5e6f6f786be113b24c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2015 12:21:40 +0200 Subject: dmaengine: Remove Renesas Audio DMAC peri peri platform data Commit 3cd44dcd35a6 ("dmaengine: remove Renesas Audio DMAC peri peri") forgot to remove the header file with the platform data definitions. Signed-off-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-rcar-audmapp.h | 34 -------------------------- 1 file changed, 34 deletions(-) delete mode 100644 include/linux/platform_data/dma-rcar-audmapp.h (limited to 'include') diff --git a/include/linux/platform_data/dma-rcar-audmapp.h b/include/linux/platform_data/dma-rcar-audmapp.h deleted file mode 100644 index 471fffebbeb4..000000000000 --- a/include/linux/platform_data/dma-rcar-audmapp.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This is for Renesas R-Car Audio-DMAC-peri-peri. - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2014 Kuninori Morimoto - * - * This file is based on the include/linux/sh_dma.h - * - * Header for the new SH dmaengine driver - * - * Copyright (C) 2010 Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef SH_AUDMAPP_H -#define SH_AUDMAPP_H - -#include - -struct audmapp_slave_config { - int slave_id; - dma_addr_t src; - dma_addr_t dst; - u32 chcr; -}; - -struct audmapp_pdata { - struct audmapp_slave_config *slave; - int slave_num; -}; - -#endif /* SH_AUDMAPP_H */ -- cgit v1.2.3 From 6ba2bd3da7d3f9af3db83f704ca055943fd9ee40 Mon Sep 17 00:00:00 2001 From: Todd Previte Date: Tue, 21 Apr 2015 11:09:41 -0700 Subject: drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6 Displayport compliance test 4.2.2.6 requires that a source device be capable of detecting a corrupt EDID. The test specification states that the sink device sets up the EDID with an invalid checksum. To do this, the sink sets up an invalid EDID header, expecting the source device to generate the checksum and compare it to the value stored in the last byte of the block data. Unfortunately, the DRM EDID reading and parsing functions are actually too good in this case; the header is fixed before the checksum is computed and thus the test never sees the invalid checksum. This results in a failure to pass the compliance test. To correct this issue, when the EDID code detects that the header is invalid, a flag is set to indicate that the EDID is corrupted. In this case, it sets edid_corrupt flag and continues with its fix-up code. This flag is also set in the case of a more seriously damaged header (fixup score less than the threshold). For consistency, the edid_corrupt flag is also set when the checksum is invalid as well. V2: - Removed the static bool global - Added a bool to the drm_connector struct to reaplce the static one for holding the status of raw edid header corruption detection - Modified the function signature of the is_valid function to take an additional parameter to store the corruption detected value - Fixed the other callers of the above is_valid function V3: - Updated the commit message to be more clear about what and why this patch does what it does. - Added comment in code to clarify the operations there - Removed compliance variable and check_link_status update; those have been moved to a later patch - Removed variable assignment from the bottom of the test handler V4: - Removed i915 tag from subject line as the patch is not i915-specific V5: - Moved code causing a compilation error to this patch where the variable is actually declared - Maintained blank lines / spacing so as to not contaminate the patch V6: - Removed extra debug messages - Added documentation to for the added parameter on drm_edid_block_valid - Fixed more whitespace issues in check_link_status - Added a clear of the header_corrupt flag to the end of the test handler in intel_dp.c - Changed the usage of the new function prototype in several places to use NULL where it is not needed by compliance testing V7: - Updated to account for long_pulse flag propagation V8: - Removed clearing of header_corrupt flag from the test handler in intel_dp.c - Added clearing of header_corrupt flag in the drm_edid_block_valid function V9: - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its value and purpose - Updated commit message V10: - Updated for versioning and patch swizzle - Revised the title to more accurately reflect the nature and contents of the patch - Fixed formatting/whitespace problems - Added set flag when computed checksum is invalid Signed-off-by: Todd Previte Cc: dri-devel@lists.freedesktop.org Acked-by: Dave Airlie Reviewed-by: Alex Deucher Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_edid.c | 32 ++++++++++++++++++++++++++------ drivers/gpu/drm/drm_edid_load.c | 7 +++++-- include/drm/drm_crtc.h | 8 +++++++- 3 files changed, 38 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 53bc7a628909..be6713c2fc9d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1041,13 +1041,15 @@ static bool drm_edid_is_zero(const u8 *in_edid, int length) * @raw_edid: pointer to raw EDID block * @block: type of block to validate (0 for base, extension otherwise) * @print_bad_edid: if true, dump bad EDID blocks to the console + * @edid_corrupt: if true, the header or checksum is invalid * * Validate a base or extension EDID block and optionally dump bad blocks to * the console. * * Return: True if the block is valid, false otherwise. */ -bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid) +bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, + bool *edid_corrupt) { u8 csum; struct edid *edid = (struct edid *)raw_edid; @@ -1060,11 +1062,22 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid) if (block == 0) { int score = drm_edid_header_is_valid(raw_edid); - if (score == 8) ; - else if (score >= edid_fixup) { + if (score == 8) { + if (edid_corrupt) + *edid_corrupt = 0; + } else if (score >= edid_fixup) { + /* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6 + * The corrupt flag needs to be set here otherwise, the + * fix-up code here will correct the problem, the + * checksum is correct and the test fails + */ + if (edid_corrupt) + *edid_corrupt = 1; DRM_DEBUG("Fixing EDID header, your hardware may be failing\n"); memcpy(raw_edid, edid_header, sizeof(edid_header)); } else { + if (edid_corrupt) + *edid_corrupt = 1; goto bad; } } @@ -1075,6 +1088,9 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid) DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum); } + if (edid_corrupt) + *edid_corrupt = 1; + /* allow CEA to slide through, switches mangle this */ if (raw_edid[0] != 0x02) goto bad; @@ -1129,7 +1145,7 @@ bool drm_edid_is_valid(struct edid *edid) return false; for (i = 0; i <= edid->extensions; i++) - if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true)) + if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true, NULL)) return false; return true; @@ -1232,7 +1248,8 @@ struct edid *drm_do_get_edid(struct drm_connector *connector, for (i = 0; i < 4; i++) { if (get_edid_block(data, block, 0, EDID_LENGTH)) goto out; - if (drm_edid_block_valid(block, 0, print_bad_edid)) + if (drm_edid_block_valid(block, 0, print_bad_edid, + &connector->edid_corrupt)) break; if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) { connector->null_edid_counter++; @@ -1257,7 +1274,10 @@ struct edid *drm_do_get_edid(struct drm_connector *connector, block + (valid_extensions + 1) * EDID_LENGTH, j, EDID_LENGTH)) goto out; - if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH, j, print_bad_edid)) { + if (drm_edid_block_valid(block + (valid_extensions + 1) + * EDID_LENGTH, j, + print_bad_edid, + NULL)) { valid_extensions++; break; } diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 4c0aa97aaf03..c5605fe4907e 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -216,7 +216,8 @@ static void *edid_load(struct drm_connector *connector, const char *name, goto out; } - if (!drm_edid_block_valid(edid, 0, print_bad_edid)) { + if (!drm_edid_block_valid(edid, 0, print_bad_edid, + &connector->edid_corrupt)) { connector->bad_edid_counter++; DRM_ERROR("Base block of EDID firmware \"%s\" is invalid ", name); @@ -229,7 +230,9 @@ static void *edid_load(struct drm_connector *connector, const char *name, if (i != valid_extensions + 1) memcpy(edid + (valid_extensions + 1) * EDID_LENGTH, edid + i * EDID_LENGTH, EDID_LENGTH); - if (drm_edid_block_valid(edid + i * EDID_LENGTH, i, print_bad_edid)) + if (drm_edid_block_valid(edid + i * EDID_LENGTH, i, + print_bad_edid, + NULL)) valid_extensions++; } diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index db9a30f10bc4..b9fcdc824997 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -719,6 +719,11 @@ struct drm_connector { int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ unsigned bad_edid_counter; + /* Flag for raw EDID header corruption - used in Displayport + * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 + */ + bool edid_corrupt; + struct dentry *debugfs_entry; struct drm_connector_state *state; @@ -1443,7 +1448,8 @@ extern void drm_set_preferred_mode(struct drm_connector *connector, int hpref, int vpref); extern int drm_edid_header_is_valid(const u8 *raw_edid); -extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid); +extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, + bool *edid_corrupt); extern bool drm_edid_is_valid(struct edid *edid); extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, -- cgit v1.2.3 From 8fb6e7a579670d5b71fc0d5641c1523b3df612e8 Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Mon, 20 Apr 2015 19:22:54 +0100 Subject: drm: Introduce blob_lock Create a new global blob_lock mutex, which protects the blob property list from insertion and/or deletion. Signed-off-by: Daniel Stone Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_crtc.c | 18 +++++++++++++++--- include/drm/drm_crtc.h | 3 +++ 2 files changed, 18 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index fd14db401517..3b6573527e7f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -4216,25 +4216,34 @@ drm_property_create_blob(struct drm_device *dev, size_t length, if (!blob) return NULL; + blob->length = length; + + memcpy(blob->data, data, length); + + mutex_lock(&dev->mode_config.blob_lock); + ret = drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB); if (ret) { kfree(blob); + mutex_unlock(&dev->mode_config.blob_lock); return NULL; } - blob->length = length; + list_add_tail(&blob->head, &dev->mode_config.property_blob_list); - memcpy(blob->data, data, length); + mutex_unlock(&dev->mode_config.blob_lock); - list_add_tail(&blob->head, &dev->mode_config.property_blob_list); return blob; } static void drm_property_destroy_blob(struct drm_device *dev, struct drm_property_blob *blob) { + mutex_lock(&dev->mode_config.blob_lock); drm_mode_object_put(dev, &blob->base); list_del(&blob->head); + mutex_unlock(&dev->mode_config.blob_lock); + kfree(blob); } @@ -4341,6 +4350,7 @@ int drm_mode_getblob_ioctl(struct drm_device *dev, return -EINVAL; drm_modeset_lock_all(dev); + mutex_lock(&dev->mode_config.blob_lock); blob = drm_property_blob_find(dev, out_resp->blob_id); if (!blob) { ret = -ENOENT; @@ -4357,6 +4367,7 @@ int drm_mode_getblob_ioctl(struct drm_device *dev, out_resp->length = blob->length; done: + mutex_unlock(&dev->mode_config.blob_lock); drm_modeset_unlock_all(dev); return ret; } @@ -5490,6 +5501,7 @@ void drm_mode_config_init(struct drm_device *dev) drm_modeset_lock_init(&dev->mode_config.connection_mutex); mutex_init(&dev->mode_config.idr_mutex); mutex_init(&dev->mode_config.fb_lock); + mutex_init(&dev->mode_config.blob_lock); INIT_LIST_HEAD(&dev->mode_config.fb_list); INIT_LIST_HEAD(&dev->mode_config.crtc_list); INIT_LIST_HEAD(&dev->mode_config.connector_list); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index ca71c03143d1..55ed8f9f45be 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1048,6 +1048,7 @@ struct drm_mode_group { * @poll_running: track polling status for this device * @output_poll_work: delayed work for polling in process context * @property_blob_list: list of all the blob property objects + * @blob_lock: mutex for blob property allocation and management * @*_property: core property tracking * @preferred_depth: preferred RBG pixel depth, used by fb helpers * @prefer_shadow: hint to userspace to prefer shadow-fb rendering @@ -1103,6 +1104,8 @@ struct drm_mode_config { bool delayed_event; struct delayed_work output_poll_work; + struct mutex blob_lock; + /* pointers to standard properties */ struct list_head property_blob_list; struct drm_property *edid_property; -- cgit v1.2.3 From ac6f2e29bb08a2313b0480c6cea94b01ab274970 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 8 May 2015 16:15:41 +0200 Subject: drm/edid: Kerneldoc for newly added edid_corrupt Also treat it as a proper boolean. Cc: Todd Previte Cc: Paulo Zanoni Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_edid.c | 8 ++++---- drivers/gpu/drm/i915/intel_dp.c | 2 +- include/drm/drm_crtc.h | 1 + 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index be6713c2fc9d..e426223482fb 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -1064,7 +1064,7 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, int score = drm_edid_header_is_valid(raw_edid); if (score == 8) { if (edid_corrupt) - *edid_corrupt = 0; + *edid_corrupt = false; } else if (score >= edid_fixup) { /* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6 * The corrupt flag needs to be set here otherwise, the @@ -1072,12 +1072,12 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, * checksum is correct and the test fails */ if (edid_corrupt) - *edid_corrupt = 1; + *edid_corrupt = true; DRM_DEBUG("Fixing EDID header, your hardware may be failing\n"); memcpy(raw_edid, edid_header, sizeof(edid_header)); } else { if (edid_corrupt) - *edid_corrupt = 1; + *edid_corrupt = true; goto bad; } } @@ -1089,7 +1089,7 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, } if (edid_corrupt) - *edid_corrupt = 1; + *edid_corrupt = true; /* allow CEA to slide through, switches mangle this */ if (raw_edid[0] != 0x02) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2b1ed66c748f..9cf9208aeaff 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4120,7 +4120,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp) struct drm_connector *connector = &intel_connector->base; if (intel_connector->detect_edid == NULL || - connector->edid_corrupt == 1 || + connector->edid_corrupt || intel_dp->aux.i2c_defer_count > 6) { /* Check EDID read for NACKs, DEFERs and corruption * (DP CTS 1.2 Core r1.1) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index b9fcdc824997..0a4a040d6bb7 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -647,6 +647,7 @@ struct drm_encoder { * @audio_latency: audio latency info from ELD, if found * @null_edid_counter: track sinks that give us all zeros for the EDID * @bad_edid_counter: track sinks that give us an EDID with invalid checksum + * @edid_corrupt: indicates whether the last read EDID was corrupt * @debugfs_entry: debugfs directory for this connector * @state: current atomic state for this connector * @has_tile: is this connector connected to a tiled monitor -- cgit v1.2.3 From 56f13c0d9524c5816f5dc9c91b9d766d6b1064ca Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 9 Apr 2015 12:35:47 +0300 Subject: dmaengine: of_dma: Support for DMA routers DMA routers are transparent devices used to mux DMA requests from peripherals to DMA controllers. They are used when the SoC integrates more devices with DMA requests then their controller can handle. DRA7x is one example of such SoC, where the sDMA can hanlde 128 DMA request lines, but in SoC level it has 205 DMA requests. The of_dma_router will be registered as of_dma_controller with special xlate function and additional parameters. The driver for the router is responsible to craft the dma_spec (in the of_dma_route_allocate callback) which can be used to requests a DMA channel from the real DMA controller. This way the router can be transparent for the system while remaining generic enough to be used in different environments. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/dma.txt | 28 +++++++++ drivers/dma/dmaengine.c | 7 +++ drivers/dma/of-dma.c | 89 +++++++++++++++++++++++++++ include/linux/dmaengine.h | 17 +++++ include/linux/of_dma.h | 21 +++++++ 5 files changed, 162 insertions(+) (limited to 'include') diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt index 82104271e754..6312fb00ce8d 100644 --- a/Documentation/devicetree/bindings/dma/dma.txt +++ b/Documentation/devicetree/bindings/dma/dma.txt @@ -31,6 +31,34 @@ Example: dma-requests = <127>; }; +* DMA router + +DMA routers are transparent IP blocks used to route DMA request lines from +devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals +integrated with DMA requests than what the DMA controller can handle directly. + +Required property: +- dma-masters: phandle of the DMA controller or list of phandles for + the DMA controllers the router can direct the signal to. +- #dma-cells: Must be at least 1. Used to provide DMA router specific + information. See DMA client binding below for more + details. + +Optional properties: +- dma-requests: Number of incoming request lines the router can handle. +- In the node pointed by the dma-masters: + - dma-requests: The router driver might need to look for this in order + to configure the routing. + +Example: + sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; * DMA client diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 0e035a8cf401..9e5949696b1b 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -267,6 +267,13 @@ static void dma_chan_put(struct dma_chan *chan) /* This channel is not in use anymore, free it */ if (!chan->client_count && chan->device->device_free_chan_resources) chan->device->device_free_chan_resources(chan); + + /* If the channel is used via a DMA request router, free the mapping */ + if (chan->router && chan->router->route_free) { + chan->router->route_free(chan->router->dev, chan->route_data); + chan->router = NULL; + chan->route_data = NULL; + } } enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie) diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c index cbd4a8aff120..1e1f2986eba8 100644 --- a/drivers/dma/of-dma.c +++ b/drivers/dma/of-dma.c @@ -44,6 +44,50 @@ static struct of_dma *of_dma_find_controller(struct of_phandle_args *dma_spec) return NULL; } +/** + * of_dma_router_xlate - translation function for router devices + * @dma_spec: pointer to DMA specifier as found in the device tree + * @of_dma: pointer to DMA controller data (router information) + * + * The function creates new dma_spec to be passed to the router driver's + * of_dma_route_allocate() function to prepare a dma_spec which will be used + * to request channel from the real DMA controller. + */ +static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct dma_chan *chan; + struct of_dma *ofdma_target; + struct of_phandle_args dma_spec_target; + void *route_data; + + /* translate the request for the real DMA controller */ + memcpy(&dma_spec_target, dma_spec, sizeof(dma_spec_target)); + route_data = ofdma->of_dma_route_allocate(&dma_spec_target, ofdma); + if (IS_ERR(route_data)) + return NULL; + + ofdma_target = of_dma_find_controller(&dma_spec_target); + if (!ofdma_target) + return NULL; + + chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target); + if (chan) { + chan->router = ofdma->dma_router; + chan->route_data = route_data; + } else { + ofdma->dma_router->route_free(ofdma->dma_router->dev, + route_data); + } + + /* + * Need to put the node back since the ofdma->of_dma_route_allocate + * has taken it for generating the new, translated dma_spec + */ + of_node_put(dma_spec_target.np); + return chan; +} + /** * of_dma_controller_register - Register a DMA controller to DT DMA helpers * @np: device node of DMA controller @@ -109,6 +153,51 @@ void of_dma_controller_free(struct device_node *np) } EXPORT_SYMBOL_GPL(of_dma_controller_free); +/** + * of_dma_router_register - Register a DMA router to DT DMA helpers as a + * controller + * @np: device node of DMA router + * @of_dma_route_allocate: setup function for the router which need to + * modify the dma_spec for the DMA controller to + * use and to set up the requested route. + * @dma_router: pointer to dma_router structure to be used when + * the route need to be free up. + * + * Returns 0 on success or appropriate errno value on error. + * + * Allocated memory should be freed with appropriate of_dma_controller_free() + * call. + */ +int of_dma_router_register(struct device_node *np, + void *(*of_dma_route_allocate) + (struct of_phandle_args *, struct of_dma *), + struct dma_router *dma_router) +{ + struct of_dma *ofdma; + + if (!np || !of_dma_route_allocate || !dma_router) { + pr_err("%s: not enough information provided\n", __func__); + return -EINVAL; + } + + ofdma = kzalloc(sizeof(*ofdma), GFP_KERNEL); + if (!ofdma) + return -ENOMEM; + + ofdma->of_node = np; + ofdma->of_dma_xlate = of_dma_router_xlate; + ofdma->of_dma_route_allocate = of_dma_route_allocate; + ofdma->dma_router = dma_router; + + /* Now queue of_dma controller structure in list */ + mutex_lock(&of_dma_lock); + list_add_tail(&ofdma->of_dma_controllers, &of_dma_list); + mutex_unlock(&of_dma_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(of_dma_router_register); + /** * of_dma_match_channel - Check if a DMA specifier matches name * @np: device node to look for DMA channels diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index ad419757241f..abf63ceabef9 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -221,6 +221,16 @@ struct dma_chan_percpu { unsigned long bytes_transferred; }; +/** + * struct dma_router - DMA router structure + * @dev: pointer to the DMA router device + * @route_free: function to be called when the route can be disconnected + */ +struct dma_router { + struct device *dev; + void (*route_free)(struct device *dev, void *route_data); +}; + /** * struct dma_chan - devices supply DMA channels, clients use them * @device: ptr to the dma device who supplies this channel, always !%NULL @@ -232,6 +242,8 @@ struct dma_chan_percpu { * @local: per-cpu pointer to a struct dma_chan_percpu * @client_count: how many clients are using this channel * @table_count: number of appearances in the mem-to-mem allocation table + * @router: pointer to the DMA router structure + * @route_data: channel specific data for the router * @private: private data for certain client-channel associations */ struct dma_chan { @@ -247,6 +259,11 @@ struct dma_chan { struct dma_chan_percpu __percpu *local; int client_count; int table_count; + + /* DMA router */ + struct dma_router *router; + void *route_data; + void *private; }; diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h index 56bc026c143f..98ba7525929e 100644 --- a/include/linux/of_dma.h +++ b/include/linux/of_dma.h @@ -23,6 +23,9 @@ struct of_dma { struct device_node *of_node; struct dma_chan *(*of_dma_xlate) (struct of_phandle_args *, struct of_dma *); + void *(*of_dma_route_allocate) + (struct of_phandle_args *, struct of_dma *); + struct dma_router *dma_router; void *of_dma_data; }; @@ -37,12 +40,20 @@ extern int of_dma_controller_register(struct device_node *np, (struct of_phandle_args *, struct of_dma *), void *data); extern void of_dma_controller_free(struct device_node *np); + +extern int of_dma_router_register(struct device_node *np, + void *(*of_dma_route_allocate) + (struct of_phandle_args *, struct of_dma *), + struct dma_router *dma_router); +#define of_dma_router_free of_dma_controller_free + extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np, const char *name); extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma); extern struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec, struct of_dma *ofdma); + #else static inline int of_dma_controller_register(struct device_node *np, struct dma_chan *(*of_dma_xlate) @@ -56,6 +67,16 @@ static inline void of_dma_controller_free(struct device_node *np) { } +static inline int of_dma_router_register(struct device_node *np, + void *(*of_dma_route_allocate) + (struct of_phandle_args *, struct of_dma *), + struct dma_router *dma_router) +{ + return -ENODEV; +} + +#define of_dma_router_free of_dma_controller_free + static inline struct dma_chan *of_dma_request_slave_channel(struct device_node *np, const char *name) { -- cgit v1.2.3 From 34ef33f7da6b00900d3a896d33522a035a930245 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2015 14:04:07 +0200 Subject: usb: phy: Remove the phy-rcar-gen2-usb driver The phy-rcar-gen2-usb driver, which supports legacy platform data only, is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"). This driver was superseded by the DT-only phy-rcar-gen2 driver, which was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY driver"). Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/Kconfig | 13 -- drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-rcar-gen2-usb.c | 246 ------------------------ include/linux/platform_data/usb-rcar-gen2-phy.h | 22 --- 4 files changed, 282 deletions(-) delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h (limited to 'include') diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2175678e674e..3cd3bee54ca6 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -186,19 +186,6 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called phy-rcar-usb. -config USB_RCAR_GEN2_PHY - tristate "Renesas R-Car Gen2 USB PHY support" - depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST - select USB_PHY - help - Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver. - It is typically used to control internal USB PHY for USBHS, - and to configure shared USB channels 0 and 2. - This driver supports R8A7790 and R8A7791. - - To compile this driver as a module, choose M here: the - module will be called phy-rcar-gen2-usb. - config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 75f2bba58c84..e36ab1d46d8b 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o -obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c deleted file mode 100644 index f81800b6562a..000000000000 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Renesas R-Car Gen2 USB phy driver - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -struct rcar_gen2_usb_phy_priv { - struct usb_phy phy; - void __iomem *base; - struct clk *clk; - spinlock_t lock; - int usecount; - u32 ugctrl2; -}; - -#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy) - -/* Low Power Status register */ -#define USBHS_LPSTS_REG 0x02 -#define USBHS_LPSTS_SUSPM (1 << 14) - -/* USB General control register */ -#define USBHS_UGCTRL_REG 0x80 -#define USBHS_UGCTRL_CONNECT (1 << 2) -#define USBHS_UGCTRL_PLLRESET (1 << 0) - -/* USB General control register 2 */ -#define USBHS_UGCTRL2_REG 0x84 -#define USBHS_UGCTRL2_USB0_PCI (1 << 4) -#define USBHS_UGCTRL2_USB0_HS (3 << 4) -#define USBHS_UGCTRL2_USB2_PCI (0 << 31) -#define USBHS_UGCTRL2_USB2_SS (1 << 31) - -/* USB General status register */ -#define USBHS_UGSTS_REG 0x88 -#define USBHS_UGSTS_LOCK (1 << 8) - -/* Enable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) -{ - u32 val; - int i; - - /* USBHS PHY power on */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val |= USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - for (i = 0; i < 20; i++) { - val = ioread32(base + USBHS_UGSTS_REG); - if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; - } - udelay(1); - } - - /* Timed out waiting for the PLL lock */ - return -ETIMEDOUT; -} - -/* Disable USBHS internal phy */ -static int __rcar_gen2_usbhs_phy_disable(void __iomem *base) -{ - u32 val; - - /* USBHS PHY power off */ - val = ioread32(base + USBHS_UGCTRL_REG); - val &= ~USBHS_UGCTRL_CONNECT; - iowrite32(val, base + USBHS_UGCTRL_REG); - - val = ioread16(base + USBHS_LPSTS_REG); - val &= ~USBHS_LPSTS_SUSPM; - iowrite16(val, base + USBHS_LPSTS_REG); - - val = ioread32(base + USBHS_UGCTRL_REG); - val |= USBHS_UGCTRL_PLLRESET; - iowrite32(val, base + USBHS_UGCTRL_REG); - return 0; -} - -/* Setup USB channels */ -static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) -{ - u32 val; - - clk_prepare_enable(priv->clk); - - /* Set USB channels in the USBHS UGCTRL2 register */ - val = ioread32(priv->base + USBHS_UGCTRL2_REG); - val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); - val |= priv->ugctrl2; - iowrite32(val, priv->base + USBHS_UGCTRL2_REG); -} - -/* Shutdown USB channels */ -static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv) -{ - __rcar_gen2_usbhs_phy_disable(priv->base); - clk_disable_unprepare(priv->clk); -} - -static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - int retval; - - spin_lock_irqsave(&priv->lock, flags); - retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) : - __rcar_gen2_usbhs_phy_enable(priv->base); - spin_unlock_irqrestore(&priv->lock, flags); - return retval; -} - -static int rcar_gen2_usb_phy_init(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - /* - * Enable the clock and setup USB channels - * if it's the first user - */ - if (!priv->usecount++) - __rcar_gen2_usb_phy_init(priv); - spin_unlock_irqrestore(&priv->lock, flags); - return 0; -} - -static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy) -{ - struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!priv->usecount) { - dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n"); - goto out; - } - - /* Disable everything if it's the last user */ - if (!--priv->usecount) - __rcar_gen2_usb_phy_shutdown(priv); -out: - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct rcar_gen2_phy_platform_data *pdata; - struct rcar_gen2_usb_phy_priv *priv; - struct resource *res; - void __iomem *base; - struct clk *clk; - int retval; - - pdata = dev_get_platdata(dev); - if (!pdata) { - dev_err(dev, "No platform data\n"); - return -EINVAL; - } - - clk = devm_clk_get(dev, "usbhs"); - if (IS_ERR(clk)) { - dev_err(dev, "Can't get the clock\n"); - return PTR_ERR(clk); - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - spin_lock_init(&priv->lock); - priv->clk = clk; - priv->base = base; - priv->ugctrl2 = pdata->chan0_pci ? - USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS; - priv->ugctrl2 |= pdata->chan2_pci ? - USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS; - priv->phy.dev = dev; - priv->phy.label = dev_name(dev); - priv->phy.init = rcar_gen2_usb_phy_init; - priv->phy.shutdown = rcar_gen2_usb_phy_shutdown; - priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend; - - retval = usb_add_phy_dev(&priv->phy); - if (retval < 0) { - dev_err(dev, "Failed to add USB phy\n"); - return retval; - } - - platform_set_drvdata(pdev, priv); - - return retval; -} - -static int rcar_gen2_usb_phy_remove(struct platform_device *pdev) -{ - struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev); - - usb_remove_phy(&priv->phy); - - return 0; -} - -static struct platform_driver rcar_gen2_usb_phy_driver = { - .driver = { - .name = "usb_phy_rcar_gen2", - }, - .probe = rcar_gen2_usb_phy_probe, - .remove = rcar_gen2_usb_phy_remove, -}; - -module_platform_driver(rcar_gen2_usb_phy_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy"); -MODULE_AUTHOR("Valentine Barshak "); diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h deleted file mode 100644 index dd3ba46c0d90..000000000000 --- a/include/linux/platform_data/usb-rcar-gen2-phy.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __USB_RCAR_GEN2_PHY_H -#define __USB_RCAR_GEN2_PHY_H - -#include - -struct rcar_gen2_phy_platform_data { - /* USB channel 0 configuration */ - bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */ - /* USB channel 2 configuration */ - bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */ -}; - -#endif -- cgit v1.2.3 From 1c5841e832e2d7563c31de4946118e78baf573a3 Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Tue, 28 Apr 2015 21:40:32 +0800 Subject: tty: serial: 8250: export early_serial8250_setup function 8250-like uart driver may call early_serial8250_setup to reuse 8250_early.c character output function. Signed-off-by: Eddie Huang Tested-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_early.c | 2 +- include/linux/serial_8250.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 6c0fd8b9d1c3..771dda29a0f8 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -131,7 +131,7 @@ static void __init init_port(struct earlycon_device *device) serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init early_serial8250_setup(struct earlycon_device *device, +int __init early_serial8250_setup(struct earlycon_device *device, const char *options) { if (!(device->port.membase || device->port.iobase)) diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 78097e7a330a..f0c68d88b6f4 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -137,6 +137,8 @@ extern int early_serial_setup(struct uart_port *port); extern unsigned int serial8250_early_in(struct uart_port *port, int offset); extern void serial8250_early_out(struct uart_port *port, int offset, int value); +extern int early_serial8250_setup(struct earlycon_device *device, + const char *options); extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); extern int serial8250_do_startup(struct uart_port *port); -- cgit v1.2.3 From c27ffc1080179c3f3b85e1e194fa61f1c9923b62 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 30 Apr 2015 18:21:25 +0200 Subject: serial: sh-sci: Move private definitions to private header file Move private register definitions and enums from the public header file to the driver private "sh-sci.h" header file. The common Serial Control Register definitions are left in the public header file, as they're needed to fill in plat_sci_port.scscr on legacy systems not using DT. Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.h | 83 +++++++++++++++++++++++++++++++++++++++++---- include/linux/serial_sci.h | 67 +----------------------------------- 2 files changed, 77 insertions(+), 73 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 350717404507..238ad0c5584b 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,6 +2,82 @@ #include #include +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + + +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ + + SCIx_NR_REGS, +}; + + +/* SCSMR (Serial Mode Register) */ +#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ +#define SCSMR_PE (1 << 5) /* Parity Enable */ +#define SCSMR_ODD (1 << 4) /* Odd Parity */ +#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Control Register, SCIFA/SCIFB only bits */ +#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ +#define SCI_RDRF 0x40 /* Receive Data Register Full */ +#define SCI_ORER 0x20 /* Overrun Error */ +#define SCI_FER 0x10 /* Framing Error */ +#define SCI_PER 0x08 /* Parity Error */ +#define SCI_TEND 0x04 /* Transmit End */ + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR (Serial Status Register) on SCIF, HSCIF */ +#define SCIF_ER 0x0080 /* Receive Error */ +#define SCIF_TEND 0x0040 /* Transmission End */ +#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ +#define SCIF_BRK 0x0010 /* Break Detect */ +#define SCIF_FER 0x0008 /* Framing Error */ +#define SCIF_PER 0x0004 /* Parity Error */ +#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ +#define SCIF_DR 0x0001 /* Receive Data Ready */ + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + +/* SCFCR (FIFO Control Register) */ +#define SCFCR_MCE 0x0008 +#define SCFCR_TFRST 0x0004 +#define SCFCR_RFRST 0x0002 +#define SCFCR_LOOP (1 << 0) /* Loopback Test */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ + +/* HSSRR HSCIF */ +#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ + + #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) @@ -28,10 +104,3 @@ # define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) #endif -/* SCFCR */ -#define SCFCR_RFRST 0x0002 -#define SCFCR_TFRST 0x0004 -#define SCFCR_MCE 0x0008 - -#define SCI_MAJOR 204 -#define SCI_MINOR_START 8 diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 6c5e3bb282b0..395fceb8c060 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -10,13 +10,6 @@ #define SCIx_NOT_SUPPORTED (-1) -/* SCSMR (Serial Mode Register) */ -#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ -#define SCSMR_PE (1 << 5) /* Parity Enable */ -#define SCSMR_ODD (1 << 4) /* Odd Parity */ -#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ -#define SCSMR_CKS 0x0003 /* Clock Select */ - /* Serial Control Register (@ = not supported by all parts) */ #define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ #define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ @@ -26,43 +19,7 @@ #define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ #define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ #define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ -/* SCIFA/SCIFB only */ -#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ -#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ - -/* SCxSR (Serial Status Register) on SCI */ -#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ -#define SCI_RDRF 0x40 /* Receive Data Register Full */ -#define SCI_ORER 0x20 /* Overrun Error */ -#define SCI_FER 0x10 /* Framing Error */ -#define SCI_PER 0x08 /* Parity Error */ -#define SCI_TEND 0x04 /* Transmit End */ - -#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) - -/* SCxSR (Serial Status Register) on SCIF, HSCIF */ -#define SCIF_ER 0x0080 /* Receive Error */ -#define SCIF_TEND 0x0040 /* Transmission End */ -#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ -#define SCIF_BRK 0x0010 /* Break Detect */ -#define SCIF_FER 0x0008 /* Framing Error */ -#define SCIF_PER 0x0004 /* Parity Error */ -#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ -#define SCIF_DR 0x0001 /* Receive Data Ready */ - -#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) - -/* SCFCR (FIFO Control Register) */ -#define SCFCR_LOOP (1 << 0) /* Loopback Test */ - -/* SCSPTR (Serial Port Register), optional */ -#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ -#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ -#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ -#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ - -/* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ + enum { SCIx_PROBE_REGTYPE, @@ -82,28 +39,6 @@ enum { SCIx_NR_REGTYPES, }; -/* - * SCI register subset common for all port types. - * Not all registers will exist on all parts. - */ -enum { - SCSMR, /* Serial Mode Register */ - SCBRR, /* Bit Rate Register */ - SCSCR, /* Serial Control Register */ - SCxSR, /* Serial Status Register */ - SCFCR, /* FIFO Control Register */ - SCFDR, /* FIFO Data Count Register */ - SCxTDR, /* Transmit (FIFO) Data Register */ - SCxRDR, /* Receive (FIFO) Data Register */ - SCLSR, /* Line Status Register */ - SCTFDR, /* Transmit FIFO Data Count Register */ - SCRFDR, /* Receive FIFO Data Count Register */ - SCSPTR, /* Serial Port Register */ - HSSRR, /* Sampling Rate Register */ - - SCIx_NR_REGS, -}; - struct device; struct plat_sci_port_ops { -- cgit v1.2.3 From d94a0a3857987c76c37a8095977fe554799ab69d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 30 Apr 2015 18:21:29 +0200 Subject: serial: sh-sci: Standardize on using the BIT() macro to define register bits Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.h | 73 +++++++++++++++++++++++---------------------- include/linux/serial_sci.h | 19 ++++++------ 2 files changed, 47 insertions(+), 45 deletions(-) (limited to 'include') diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 1586d68470b6..5282738375ae 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -1,3 +1,4 @@ +#include #include #include #include @@ -32,62 +33,62 @@ enum { /* SCSMR (Serial Mode Register) */ -#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ -#define SCSMR_PE (1 << 5) /* Parity Enable */ -#define SCSMR_ODD (1 << 4) /* Odd Parity */ -#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ -#define SCSMR_CKS 0x0003 /* Clock Select */ +#define SCSMR_CHR BIT(6) /* 7-bit Character Length */ +#define SCSMR_PE BIT(5) /* Parity Enable */ +#define SCSMR_ODD BIT(4) /* Odd Parity */ +#define SCSMR_STOP BIT(3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ /* Serial Control Register, SCIFA/SCIFB only bits */ -#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ -#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ +#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ /* SCxSR (Serial Status Register) on SCI */ -#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ -#define SCI_RDRF 0x40 /* Receive Data Register Full */ -#define SCI_ORER 0x20 /* Overrun Error */ -#define SCI_FER 0x10 /* Framing Error */ -#define SCI_PER 0x08 /* Parity Error */ -#define SCI_TEND 0x04 /* Transmit End */ +#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ +#define SCI_RDRF BIT(6) /* Receive Data Register Full */ +#define SCI_ORER BIT(5) /* Overrun Error */ +#define SCI_FER BIT(4) /* Framing Error */ +#define SCI_PER BIT(3) /* Parity Error */ +#define SCI_TEND BIT(2) /* Transmit End */ #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) /* SCxSR (Serial Status Register) on SCIF, HSCIF */ -#define SCIF_ER 0x0080 /* Receive Error */ -#define SCIF_TEND 0x0040 /* Transmission End */ -#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ -#define SCIF_BRK 0x0010 /* Break Detect */ -#define SCIF_FER 0x0008 /* Framing Error */ -#define SCIF_PER 0x0004 /* Parity Error */ -#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ -#define SCIF_DR 0x0001 /* Receive Data Ready */ +#define SCIF_ER BIT(7) /* Receive Error */ +#define SCIF_TEND BIT(6) /* Transmission End */ +#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ +#define SCIF_BRK BIT(4) /* Break Detect */ +#define SCIF_FER BIT(3) /* Framing Error */ +#define SCIF_PER BIT(2) /* Parity Error */ +#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ +#define SCIF_DR BIT(0) /* Receive Data Ready */ #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) /* SCFCR (FIFO Control Register) */ -#define SCFCR_MCE 0x0008 /* Modem Control Enable */ -#define SCFCR_TFRST 0x0004 /* Transmit FIFO Data Register Reset */ -#define SCFCR_RFRST 0x0002 /* Receive FIFO Data Register Reset */ -#define SCFCR_LOOP (1 << 0) /* Loopback Test */ +#define SCFCR_MCE BIT(3) /* Modem Control Enable */ +#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ +#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ +#define SCFCR_LOOP BIT(0) /* Loopback Test */ /* SCSPTR (Serial Port Register), optional */ -#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ -#define SCSPTR_RTSDT (1 << 6) /* Serial Port RTS Pin Data */ -#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ -#define SCSPTR_CTSDT (1 << 4) /* Serial Port CTS Pin Data */ -#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ -#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ +#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS Pin Data */ +#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS Pin Data */ +#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ /* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ +#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ -#define SCPCR_RTSC (1 << 4) /* Serial Port RTS Pin / Output Pin */ -#define SCPCR_CTSC (1 << 3) /* Serial Port CTS Pin / Input Pin */ +#define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */ +#define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */ /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ -#define SCPDR_RTSD (1 << 4) /* Serial Port RTS Output Pin Data */ -#define SCPDR_CTSD (1 << 3) /* Serial Port CTS Input Pin Data */ +#define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ +#define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 395fceb8c060..7c536ac5be05 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -1,6 +1,7 @@ #ifndef __LINUX_SERIAL_SCI_H #define __LINUX_SERIAL_SCI_H +#include #include #include @@ -11,14 +12,14 @@ #define SCIx_NOT_SUPPORTED (-1) /* Serial Control Register (@ = not supported by all parts) */ -#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ -#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ -#define SCSCR_TE (1 << 5) /* Transmit Enable */ -#define SCSCR_RE (1 << 4) /* Receive Enable */ -#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */ -#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ -#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ -#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ +#define SCSCR_TIE BIT(7) /* Transmit Interrupt Enable */ +#define SCSCR_RIE BIT(6) /* Receive Interrupt Enable */ +#define SCSCR_TE BIT(5) /* Transmit Enable */ +#define SCSCR_RE BIT(4) /* Receive Enable */ +#define SCSCR_REIE BIT(3) /* Receive Error Interrupt Enable @ */ +#define SCSCR_TOIE BIT(2) /* Timeout Interrupt Enable @ */ +#define SCSCR_CKE1 BIT(1) /* Clock Enable 1 */ +#define SCSCR_CKE0 BIT(0) /* Clock Enable 0 */ enum { @@ -48,7 +49,7 @@ struct plat_sci_port_ops { /* * Port-specific capabilities */ -#define SCIx_HAVE_RTSCTS (1 << 0) +#define SCIx_HAVE_RTSCTS BIT(0) /* * Platform device specific platform_data struct -- cgit v1.2.3 From bd63364caa8df38bad2b25b11b2a1b849475cce5 Mon Sep 17 00:00:00 2001 From: Scot Doyle Date: Thu, 26 Mar 2015 13:54:39 +0000 Subject: vt: add cursor blink interval escape sequence Add an escape sequence to specify the current console's cursor blink interval. The interval is specified as a number of milliseconds until the next cursor display state toggle, from 50 to 65535. /proc/loadavg did not show a difference with a one msec interval, but the lower bound is set to 50 msecs since slower hardware wasn't tested. Store the interval in the vc_data structure for later access by fbcon, initializing the value to fbcon's current hardcoded value of 200 msecs. Signed-off-by: Scot Doyle Acked-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 9 +++++++++ include/linux/console_struct.h | 1 + 2 files changed, 10 insertions(+) (limited to 'include') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4a24eb2b0ede..b075489f314e 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -135,6 +135,7 @@ const struct consw *conswitchp; */ #define DEFAULT_BELL_PITCH 750 #define DEFAULT_BELL_DURATION (HZ/8) +#define DEFAULT_CURSOR_BLINK_MS 200 struct vc vc_cons [MAX_NR_CONSOLES]; @@ -1590,6 +1591,13 @@ static void setterm_command(struct vc_data *vc) case 15: /* activate the previous console */ set_console(last_console); break; + case 16: /* set cursor blink duration in msec */ + if (vc->vc_npar >= 1 && vc->vc_par[1] >= 50 && + vc->vc_par[1] <= USHRT_MAX) + vc->vc_cur_blink_ms = vc->vc_par[1]; + else + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; + break; } } @@ -1717,6 +1725,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_bell_pitch = DEFAULT_BELL_PITCH; vc->vc_bell_duration = DEFAULT_BELL_DURATION; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; gotoxy(vc, 0, 0); save_cur(vc); diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index e859c98d1767..e329ee2667e1 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -104,6 +104,7 @@ struct vc_data { unsigned int vc_resize_user; /* resize request from user */ unsigned int vc_bell_pitch; /* Console bell pitch */ unsigned int vc_bell_duration; /* Console bell duration */ + unsigned short vc_cur_blink_ms; /* Cursor blink duration */ struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ struct uni_pagedir *vc_uni_pagedir; struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ -- cgit v1.2.3 From faaa44955dedc661f083636d816af90975a359ee Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 29 Apr 2015 21:16:39 +0300 Subject: iio: core: Introduce IIO_CHAN_INFO_OVERSAMPLING_RATIO Some magnetometers can perform a number of repetitions in HW for each measurement to increase accuracy. One example is Bosch BMC150: http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf. Introduce an interface to set the oversampling ratio for these devices. Signed-off-by: Irina Tirdea Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio | 12 ++++++++++++ drivers/iio/industrialio-core.c | 1 + include/linux/iio/iio.h | 1 + 3 files changed, 14 insertions(+) (limited to 'include') diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 866b4ec4aab6..e46c71fbd047 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1375,3 +1375,15 @@ Description: The emissivity ratio of the surface in the field of view of the contactless temperature sensor. Emissivity varies from 0 to 1, with 1 being the emissivity of a black body. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied number of measurements for acquiring one + data point. The HW will do [_name]_oversampling_ratio + measurements and return the average value as output data. Each + value resulted from [_name]_oversampling_ratio measurements + is considered as one sample for [_name]_sampling_frequency. diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 7c98bc1504e6..dfa81db3b910 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -129,6 +129,7 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_DEBOUNCE_COUNT] = "debounce_count", [IIO_CHAN_INFO_DEBOUNCE_TIME] = "debounce_time", [IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity", + [IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio", }; /** diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index b1e46ae89aa7..058441da4984 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -44,6 +44,7 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_DEBOUNCE_COUNT, IIO_CHAN_INFO_DEBOUNCE_TIME, IIO_CHAN_INFO_CALIBEMISSIVITY, + IIO_CHAN_INFO_OVERSAMPLING_RATIO, }; enum iio_shared_by { -- cgit v1.2.3 From 1c2a7eb7169b855f6c3e9db036c6767052528ffe Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Mar 2015 19:55:58 +0100 Subject: ARM: shmobile: r8a73a4: Add IRQC clock to device tree Link the external IRQ controllers irqc0 and irqc1 to the IRQC module clock, so they can be power managed using that clock. Signed-off-by: Geert Uytterhoeven [horms: corrected typo in changelog to refer to r8a73a4] Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 11 +++++++---- include/dt-bindings/clock/r8a73a4-clock.h | 1 + 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 0fd889f88109..7ee22a41c6c9 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -163,6 +163,7 @@ <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>, <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -197,6 +198,7 @@ <0 55 IRQ_TYPE_LEVEL_HIGH>, <0 56 IRQ_TYPE_LEVEL_HIGH>, <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -724,15 +726,16 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + clocks = <&main_div2_clk>, <&main_div2_clk>, + <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks R8A73A4_CLK_HP>; #clock-cells = <1>; clock-indices = < - R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 - R8A73A4_CLK_IIC3 + R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5 + R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3 >; clock-output-names = - "iic5", "iic4", "iic3"; + "irqc", "iic5", "iic4", "iic3"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h index 9a4b4c9ca44a..dd11ecdf837e 100644 --- a/include/dt-bindings/clock/r8a73a4-clock.h +++ b/include/dt-bindings/clock/r8a73a4-clock.h @@ -54,6 +54,7 @@ #define R8A73A4_CLK_IIC3 11 #define R8A73A4_CLK_IIC4 10 #define R8A73A4_CLK_IIC5 9 +#define R8A73A4_CLK_IRQC 7 /* MSTP5 */ #define R8A73A4_CLK_THERMAL 22 -- cgit v1.2.3 From 61624caf2479732beb42ea88a6b6ca3c7ae59cd7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Mar 2015 19:55:59 +0100 Subject: ARM: shmobile: r8a7790: Add IRQC clock to device tree Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 9 +++++++++ include/dt-bindings/clock/r8a7790-clock.h | 3 +++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index f3b8430070b6..22e73906ec88 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -252,6 +252,7 @@ <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7790_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -1158,6 +1159,14 @@ "iic0", "pciec", "iic1", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 3f2c6b198d4a..ff7ca3584e16 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -79,6 +79,9 @@ #define R8A7790_CLK_USBDMAC0 30 #define R8A7790_CLK_USBDMAC1 31 +/* MSTP4 */ +#define R8A7790_CLK_IRQC 7 + /* MSTP5 */ #define R8A7790_CLK_AUDIO_DMAC1 1 #define R8A7790_CLK_AUDIO_DMAC0 2 -- cgit v1.2.3 From 62d386c04b1cb9df430c955b309406175d26b6b3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Mar 2015 19:56:00 +0100 Subject: ARM: shmobile: r8a7791: Add IRQC clock to device tree Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 9 +++++++++ include/dt-bindings/clock/r8a7791-clock.h | 3 +++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 3e9f824797e7..d2c41ad701cc 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -239,6 +239,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7791_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -1160,6 +1161,14 @@ "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 8fc5dc8faeea..402268384b99 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -70,6 +70,9 @@ #define R8A7791_CLK_USBDMAC0 30 #define R8A7791_CLK_USBDMAC1 31 +/* MSTP4 */ +#define R8A7791_CLK_IRQC 7 + /* MSTP5 */ #define R8A7791_CLK_AUDIO_DMAC1 1 #define R8A7791_CLK_AUDIO_DMAC0 2 -- cgit v1.2.3 From 1c5ca5db11edd7ff27ad8a98ffb2ac61bfd520b6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Mar 2015 19:56:01 +0100 Subject: ARM: shmobile: r8a7794: Add IRQC clock to device tree Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 9 +++++++++ include/dt-bindings/clock/r8a7794-clock.h | 3 +++ 2 files changed, 12 insertions(+) (limited to 'include') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7a3ffa51a8bf..01cf54f70501 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -105,6 +105,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7794_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -625,6 +626,14 @@ "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "irqc"; + }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index d63323032d6e..09da38a58776 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -60,6 +60,9 @@ #define R8A7794_CLK_USBDMAC0 30 #define R8A7794_CLK_USBDMAC1 31 +/* MSTP4 */ +#define R8A7794_CLK_IRQC 7 + /* MSTP5 */ #define R8A7794_CLK_THERMAL 22 #define R8A7794_CLK_PWM 23 -- cgit v1.2.3 From 6be109b31ccdb9c98e7be12687171f6602527a5d Mon Sep 17 00:00:00 2001 From: Arun Ramamurthy Date: Wed, 22 Apr 2015 16:04:11 -0700 Subject: phy: core: Add devm_of_phy_get_by_index to phy-core Some generic drivers, such as ehci, may use multiple phys and for such drivers referencing phy(s) by name(s) does not make sense. Instead of inventing new naming schemes and using custom code to iterate through them, such drivers are better of using nameless phy bindings and using this newly introduced API to iterate through them. Signed-off-by: Arun Ramamurthy Reviewed-by: Ray Jui Reviewed-by: Scott Branden [kishon@ti.com: fix compilation errors] Signed-off-by: Kishon Vijay Abraham I --- Documentation/phy.txt | 7 ++++++- drivers/phy/phy-core.c | 32 ++++++++++++++++++++++++++++++++ include/linux/phy/phy.h | 9 +++++++++ 3 files changed, 47 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/Documentation/phy.txt b/Documentation/phy.txt index 371361c69a4b..b388c5af9e72 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -76,6 +76,8 @@ struct phy *phy_get(struct device *dev, const char *string); struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); struct phy *devm_phy_optional_get(struct device *dev, const char *string); +struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, + int index); phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can be used to get the PHY. In the case of dt boot, the string arguments @@ -86,7 +88,10 @@ successful PHY get. On driver detach, release function is invoked on the the devres data and devres data is freed. phy_optional_get and devm_phy_optional_get should be used when the phy is optional. These two functions will never return -ENODEV, but instead returns NULL when -the phy cannot be found. +the phy cannot be found.Some generic drivers, such as ehci, may use multiple +phys and for such drivers referencing phy(s) by name(s) does not make sense. In +this case, devm_of_phy_get_by_index can be used to get a phy reference based on +the index. It should be noted that NULL is a valid phy reference. All phy consumer calls on the NULL phy become NOPs. That is the release calls, diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 3791838f4bd4..964a84d5a580 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -622,6 +622,38 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, } EXPORT_SYMBOL_GPL(devm_of_phy_get); +/** + * devm_of_phy_get_by_index() - lookup and obtain a reference to a phy by index. + * @dev: device that requests this phy + * @np: node containing the phy + * @index: index of the phy + * + * Gets the phy using _of_phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + * + */ +struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, + int index) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = _of_phy_get(np, index); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_of_phy_get_by_index); + /** * phy_create() - create a new phy * @dev: device that is creating the new phy diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index a0197fa1b116..8cf05e341cff 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -133,6 +133,8 @@ struct phy *devm_phy_get(struct device *dev, const char *string); struct phy *devm_phy_optional_get(struct device *dev, const char *string); struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, const char *con_id); +struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, + int index); void phy_put(struct phy *phy); void devm_phy_put(struct device *dev, struct phy *phy); struct phy *of_phy_get(struct device_node *np, const char *con_id); @@ -261,6 +263,13 @@ static inline struct phy *devm_of_phy_get(struct device *dev, return ERR_PTR(-ENOSYS); } +static inline struct phy *devm_of_phy_get_by_index(struct device *dev, + struct device_node *np, + int index) +{ + return ERR_PTR(-ENOSYS); +} + static inline void phy_put(struct phy *phy) { } -- cgit v1.2.3 From 9d0be7f4810257a9b0fc78fff641f14409f14ab3 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Mon, 11 May 2015 19:34:23 -0700 Subject: thermal: support slope and offset coefficients It is common to have a linear extrapolation from the current sensor readings and the actual temperature value. This is specially the case when the sensor is in use to extrapolate hotspots. This patch adds slope and offset constants for single sensor linear extrapolation equation. Because the same sensor can be use in different locations, from board to board, these constants are added as part of thermal_zone_params. The constants are available through sysfs. It is up to the device driver to determine the usage of these values. Signed-off-by: Eduardo Valentin --- Documentation/thermal/sysfs-api.txt | 16 ++++++++++++++++ drivers/thermal/thermal_core.c | 4 ++++ include/linux/thermal.h | 11 +++++++++++ 3 files changed, 31 insertions(+) (limited to 'include') diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 7d44d7f1a71b..c1f6864a8c5d 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -190,6 +190,8 @@ Thermal zone device sys I/F, created once it's registered: |---k_i: PID's integral term in the power allocator gov |---k_d: PID's derivative term in the power allocator |---integral_cutoff: Offset above which errors are accumulated + |---slope: Slope constant applied as linear extrapolation + |---offset: Offset constant applied as linear extrapolation Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: @@ -359,6 +361,20 @@ integral_cutoff Documentation/thermal/power_allocator.txt RW, Optional +slope + The slope constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + RW, Optional + +offset + The offset constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + RW, Optional + ***************************** * Cooling device attributes * ***************************** diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 962de1847cc0..04659bfb888b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -944,6 +944,8 @@ create_s32_tzp_attr(k_pu); create_s32_tzp_attr(k_i); create_s32_tzp_attr(k_d); create_s32_tzp_attr(integral_cutoff); +create_s32_tzp_attr(slope); +create_s32_tzp_attr(offset); #undef create_s32_tzp_attr static struct device_attribute *dev_tzp_attrs[] = { @@ -953,6 +955,8 @@ static struct device_attribute *dev_tzp_attrs[] = { &dev_attr_k_i, &dev_attr_k_d, &dev_attr_integral_cutoff, + &dev_attr_slope, + &dev_attr_offset, }; static int create_tzp_attrs(struct device *dev) diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 6bbe11c97cea..037e9df2f610 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -302,6 +302,17 @@ struct thermal_zone_params { /* threshold below which the error is no longer accumulated */ s32 integral_cutoff; + + /* + * @slope: slope of a linear temperature adjustment curve. + * Used by thermal zone drivers. + */ + int slope; + /* + * @offset: offset of a linear temperature adjustment curve. + * Used by thermal zone drivers (default 0). + */ + int offset; }; struct thermal_genl_event { -- cgit v1.2.3 From 05ae797566a66d159cf1e2ee11bf3f6fae40c8eb Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Mon, 4 May 2015 10:36:35 -0700 Subject: mailbox: Make mbox_chan_ops const The mailbox controller's channel ops ought to be read-only. Update all the mailbox drivers to make their mbox_chan_ops const as well. Signed-off-by: Andrew Bresticker Cc: Ashwin Chaugule Cc: Ley Foon Tan Acked-by: Suman Anna Signed-off-by: Jassi Brar --- drivers/mailbox/arm_mhu.c | 2 +- drivers/mailbox/mailbox-altera.c | 2 +- drivers/mailbox/omap-mailbox.c | 2 +- drivers/mailbox/pcc.c | 2 +- include/linux/mailbox_controller.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/drivers/mailbox/arm_mhu.c b/drivers/mailbox/arm_mhu.c index ac693c635357..d9e99f981aa9 100644 --- a/drivers/mailbox/arm_mhu.c +++ b/drivers/mailbox/arm_mhu.c @@ -110,7 +110,7 @@ static void mhu_shutdown(struct mbox_chan *chan) free_irq(mlink->irq, chan); } -static struct mbox_chan_ops mhu_ops = { +static const struct mbox_chan_ops mhu_ops = { .send_data = mhu_send_data, .startup = mhu_startup, .shutdown = mhu_shutdown, diff --git a/drivers/mailbox/mailbox-altera.c b/drivers/mailbox/mailbox-altera.c index a266265677d3..bb682c926b0a 100644 --- a/drivers/mailbox/mailbox-altera.c +++ b/drivers/mailbox/mailbox-altera.c @@ -285,7 +285,7 @@ static void altera_mbox_shutdown(struct mbox_chan *chan) } } -static struct mbox_chan_ops altera_mbox_ops = { +static const struct mbox_chan_ops altera_mbox_ops = { .send_data = altera_mbox_send_data, .startup = altera_mbox_startup, .shutdown = altera_mbox_shutdown, diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c index 0f332c178b07..03f8545ba037 100644 --- a/drivers/mailbox/omap-mailbox.c +++ b/drivers/mailbox/omap-mailbox.c @@ -604,7 +604,7 @@ static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data) return ret; } -static struct mbox_chan_ops omap_mbox_chan_ops = { +static const struct mbox_chan_ops omap_mbox_chan_ops = { .startup = omap_mbox_chan_startup, .send_data = omap_mbox_chan_send_data, .shutdown = omap_mbox_chan_shutdown, diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index 7e91d68a3ac3..26d121d1d501 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -198,7 +198,7 @@ static int pcc_send_data(struct mbox_chan *chan, void *data) return 0; } -static struct mbox_chan_ops pcc_chan_ops = { +static const struct mbox_chan_ops pcc_chan_ops = { .send_data = pcc_send_data, }; diff --git a/include/linux/mailbox_controller.h b/include/linux/mailbox_controller.h index d4cf96f07cfc..68c42454439b 100644 --- a/include/linux/mailbox_controller.h +++ b/include/linux/mailbox_controller.h @@ -72,7 +72,7 @@ struct mbox_chan_ops { */ struct mbox_controller { struct device *dev; - struct mbox_chan_ops *ops; + const struct mbox_chan_ops *ops; struct mbox_chan *chans; int num_chans; bool txdone_irq; -- cgit v1.2.3 From 3c4ed7bdf5997d8020cbb8d4abbef2fcfb9f1284 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Sat, 2 May 2015 15:10:46 -0700 Subject: LSM: Split security.h The security.h header file serves two purposes, interfaces for users of the security modules and interfaces for security modules. Users of the security modules don't need to know about what's in the security_operations structure, so pull it out into it's own header, lsm_hooks.h Signed-off-by: Casey Schaufler Acked-by: John Johansen Acked-by: Kees Cook Acked-by: Paul Moore Acked-by: Stephen Smalley Acked-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/lsm_hooks.h | 358 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/security.h | 305 --------------------------------------- security/apparmor/lsm.c | 2 +- security/capability.c | 2 +- security/security.c | 2 +- security/selinux/hooks.c | 2 +- security/smack/smack.h | 2 +- security/tomoyo/tomoyo.c | 2 +- security/yama/yama_lsm.c | 2 +- 9 files changed, 365 insertions(+), 312 deletions(-) create mode 100644 include/linux/lsm_hooks.h (limited to 'include') diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h new file mode 100644 index 000000000000..c60f81b2d18c --- /dev/null +++ b/include/linux/lsm_hooks.h @@ -0,0 +1,358 @@ +/* + * Linux Security Module interfaces + * + * Copyright (C) 2001 WireX Communications, Inc + * Copyright (C) 2001 Greg Kroah-Hartman + * Copyright (C) 2001 Networks Associates Technology, Inc + * Copyright (C) 2001 James Morris + * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group) + * Copyright (C) 2015 Intel Corporation. + * Copyright (C) 2015 Casey Schaufler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Due to this file being licensed under the GPL there is controversy over + * whether this permits you to write a module that #includes this file + * without placing your module under the GPL. Please consult a lawyer for + * advice before doing this. + * + */ + +#ifndef __LINUX_LSM_HOOKS_H +#define __LINUX_LSM_HOOKS_H + +#include + +/* Maximum number of letters for an LSM name string */ +#define SECURITY_NAME_MAX 10 + +#ifdef CONFIG_SECURITY + +struct security_operations { + char name[SECURITY_NAME_MAX + 1]; + + int (*binder_set_context_mgr)(struct task_struct *mgr); + int (*binder_transaction)(struct task_struct *from, + struct task_struct *to); + int (*binder_transfer_binder)(struct task_struct *from, + struct task_struct *to); + int (*binder_transfer_file)(struct task_struct *from, + struct task_struct *to, + struct file *file); + + int (*ptrace_access_check)(struct task_struct *child, + unsigned int mode); + int (*ptrace_traceme)(struct task_struct *parent); + int (*capget)(struct task_struct *target, kernel_cap_t *effective, + kernel_cap_t *inheritable, kernel_cap_t *permitted); + int (*capset)(struct cred *new, const struct cred *old, + const kernel_cap_t *effective, + const kernel_cap_t *inheritable, + const kernel_cap_t *permitted); + int (*capable)(const struct cred *cred, struct user_namespace *ns, + int cap, int audit); + int (*quotactl)(int cmds, int type, int id, struct super_block *sb); + int (*quota_on)(struct dentry *dentry); + int (*syslog)(int type); + int (*settime)(const struct timespec *ts, const struct timezone *tz); + int (*vm_enough_memory)(struct mm_struct *mm, long pages); + + int (*bprm_set_creds)(struct linux_binprm *bprm); + int (*bprm_check_security)(struct linux_binprm *bprm); + int (*bprm_secureexec)(struct linux_binprm *bprm); + void (*bprm_committing_creds)(struct linux_binprm *bprm); + void (*bprm_committed_creds)(struct linux_binprm *bprm); + + int (*sb_alloc_security)(struct super_block *sb); + void (*sb_free_security)(struct super_block *sb); + int (*sb_copy_data)(char *orig, char *copy); + int (*sb_remount)(struct super_block *sb, void *data); + int (*sb_kern_mount)(struct super_block *sb, int flags, void *data); + int (*sb_show_options)(struct seq_file *m, struct super_block *sb); + int (*sb_statfs)(struct dentry *dentry); + int (*sb_mount)(const char *dev_name, struct path *path, + const char *type, unsigned long flags, void *data); + int (*sb_umount)(struct vfsmount *mnt, int flags); + int (*sb_pivotroot)(struct path *old_path, struct path *new_path); + int (*sb_set_mnt_opts)(struct super_block *sb, + struct security_mnt_opts *opts, + unsigned long kern_flags, + unsigned long *set_kern_flags); + int (*sb_clone_mnt_opts)(const struct super_block *oldsb, + struct super_block *newsb); + int (*sb_parse_opts_str)(char *options, struct security_mnt_opts *opts); + int (*dentry_init_security)(struct dentry *dentry, int mode, + struct qstr *name, void **ctx, + u32 *ctxlen); + + +#ifdef CONFIG_SECURITY_PATH + int (*path_unlink)(struct path *dir, struct dentry *dentry); + int (*path_mkdir)(struct path *dir, struct dentry *dentry, + umode_t mode); + int (*path_rmdir)(struct path *dir, struct dentry *dentry); + int (*path_mknod)(struct path *dir, struct dentry *dentry, + umode_t mode, unsigned int dev); + int (*path_truncate)(struct path *path); + int (*path_symlink)(struct path *dir, struct dentry *dentry, + const char *old_name); + int (*path_link)(struct dentry *old_dentry, struct path *new_dir, + struct dentry *new_dentry); + int (*path_rename)(struct path *old_dir, struct dentry *old_dentry, + struct path *new_dir, + struct dentry *new_dentry); + int (*path_chmod)(struct path *path, umode_t mode); + int (*path_chown)(struct path *path, kuid_t uid, kgid_t gid); + int (*path_chroot)(struct path *path); +#endif + + int (*inode_alloc_security)(struct inode *inode); + void (*inode_free_security)(struct inode *inode); + int (*inode_init_security)(struct inode *inode, struct inode *dir, + const struct qstr *qstr, + const char **name, void **value, + size_t *len); + int (*inode_create)(struct inode *dir, struct dentry *dentry, + umode_t mode); + int (*inode_link)(struct dentry *old_dentry, struct inode *dir, + struct dentry *new_dentry); + int (*inode_unlink)(struct inode *dir, struct dentry *dentry); + int (*inode_symlink)(struct inode *dir, struct dentry *dentry, + const char *old_name); + int (*inode_mkdir)(struct inode *dir, struct dentry *dentry, + umode_t mode); + int (*inode_rmdir)(struct inode *dir, struct dentry *dentry); + int (*inode_mknod)(struct inode *dir, struct dentry *dentry, + umode_t mode, dev_t dev); + int (*inode_rename)(struct inode *old_dir, struct dentry *old_dentry, + struct inode *new_dir, + struct dentry *new_dentry); + int (*inode_readlink)(struct dentry *dentry); + int (*inode_follow_link)(struct dentry *dentry, struct nameidata *nd); + int (*inode_permission)(struct inode *inode, int mask); + int (*inode_setattr)(struct dentry *dentry, struct iattr *attr); + int (*inode_getattr)(const struct path *path); + int (*inode_setxattr)(struct dentry *dentry, const char *name, + const void *value, size_t size, int flags); + void (*inode_post_setxattr)(struct dentry *dentry, const char *name, + const void *value, size_t size, + int flags); + int (*inode_getxattr)(struct dentry *dentry, const char *name); + int (*inode_listxattr)(struct dentry *dentry); + int (*inode_removexattr)(struct dentry *dentry, const char *name); + int (*inode_need_killpriv)(struct dentry *dentry); + int (*inode_killpriv)(struct dentry *dentry); + int (*inode_getsecurity)(const struct inode *inode, const char *name, + void **buffer, bool alloc); + int (*inode_setsecurity)(struct inode *inode, const char *name, + const void *value, size_t size, + int flags); + int (*inode_listsecurity)(struct inode *inode, char *buffer, + size_t buffer_size); + void (*inode_getsecid)(const struct inode *inode, u32 *secid); + + int (*file_permission)(struct file *file, int mask); + int (*file_alloc_security)(struct file *file); + void (*file_free_security)(struct file *file); + int (*file_ioctl)(struct file *file, unsigned int cmd, + unsigned long arg); + int (*mmap_addr)(unsigned long addr); + int (*mmap_file)(struct file *file, unsigned long reqprot, + unsigned long prot, unsigned long flags); + int (*file_mprotect)(struct vm_area_struct *vma, unsigned long reqprot, + unsigned long prot); + int (*file_lock)(struct file *file, unsigned int cmd); + int (*file_fcntl)(struct file *file, unsigned int cmd, + unsigned long arg); + void (*file_set_fowner)(struct file *file); + int (*file_send_sigiotask)(struct task_struct *tsk, + struct fown_struct *fown, int sig); + int (*file_receive)(struct file *file); + int (*file_open)(struct file *file, const struct cred *cred); + + int (*task_create)(unsigned long clone_flags); + void (*task_free)(struct task_struct *task); + int (*cred_alloc_blank)(struct cred *cred, gfp_t gfp); + void (*cred_free)(struct cred *cred); + int (*cred_prepare)(struct cred *new, const struct cred *old, + gfp_t gfp); + void (*cred_transfer)(struct cred *new, const struct cred *old); + int (*kernel_act_as)(struct cred *new, u32 secid); + int (*kernel_create_files_as)(struct cred *new, struct inode *inode); + int (*kernel_fw_from_file)(struct file *file, char *buf, size_t size); + int (*kernel_module_request)(char *kmod_name); + int (*kernel_module_from_file)(struct file *file); + int (*task_fix_setuid)(struct cred *new, const struct cred *old, + int flags); + int (*task_setpgid)(struct task_struct *p, pid_t pgid); + int (*task_getpgid)(struct task_struct *p); + int (*task_getsid)(struct task_struct *p); + void (*task_getsecid)(struct task_struct *p, u32 *secid); + int (*task_setnice)(struct task_struct *p, int nice); + int (*task_setioprio)(struct task_struct *p, int ioprio); + int (*task_getioprio)(struct task_struct *p); + int (*task_setrlimit)(struct task_struct *p, unsigned int resource, + struct rlimit *new_rlim); + int (*task_setscheduler)(struct task_struct *p); + int (*task_getscheduler)(struct task_struct *p); + int (*task_movememory)(struct task_struct *p); + int (*task_kill)(struct task_struct *p, struct siginfo *info, + int sig, u32 secid); + int (*task_wait)(struct task_struct *p); + int (*task_prctl)(int option, unsigned long arg2, unsigned long arg3, + unsigned long arg4, unsigned long arg5); + void (*task_to_inode)(struct task_struct *p, struct inode *inode); + + int (*ipc_permission)(struct kern_ipc_perm *ipcp, short flag); + void (*ipc_getsecid)(struct kern_ipc_perm *ipcp, u32 *secid); + + int (*msg_msg_alloc_security)(struct msg_msg *msg); + void (*msg_msg_free_security)(struct msg_msg *msg); + + int (*msg_queue_alloc_security)(struct msg_queue *msq); + void (*msg_queue_free_security)(struct msg_queue *msq); + int (*msg_queue_associate)(struct msg_queue *msq, int msqflg); + int (*msg_queue_msgctl)(struct msg_queue *msq, int cmd); + int (*msg_queue_msgsnd)(struct msg_queue *msq, struct msg_msg *msg, + int msqflg); + int (*msg_queue_msgrcv)(struct msg_queue *msq, struct msg_msg *msg, + struct task_struct *target, long type, + int mode); + + int (*shm_alloc_security)(struct shmid_kernel *shp); + void (*shm_free_security)(struct shmid_kernel *shp); + int (*shm_associate)(struct shmid_kernel *shp, int shmflg); + int (*shm_shmctl)(struct shmid_kernel *shp, int cmd); + int (*shm_shmat)(struct shmid_kernel *shp, char __user *shmaddr, + int shmflg); + + int (*sem_alloc_security)(struct sem_array *sma); + void (*sem_free_security)(struct sem_array *sma); + int (*sem_associate)(struct sem_array *sma, int semflg); + int (*sem_semctl)(struct sem_array *sma, int cmd); + int (*sem_semop)(struct sem_array *sma, struct sembuf *sops, + unsigned nsops, int alter); + + int (*netlink_send)(struct sock *sk, struct sk_buff *skb); + + void (*d_instantiate)(struct dentry *dentry, struct inode *inode); + + int (*getprocattr)(struct task_struct *p, char *name, char **value); + int (*setprocattr)(struct task_struct *p, char *name, void *value, + size_t size); + int (*ismaclabel)(const char *name); + int (*secid_to_secctx)(u32 secid, char **secdata, u32 *seclen); + int (*secctx_to_secid)(const char *secdata, u32 seclen, u32 *secid); + void (*release_secctx)(char *secdata, u32 seclen); + + int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen); + int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen); + int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen); + +#ifdef CONFIG_SECURITY_NETWORK + int (*unix_stream_connect)(struct sock *sock, struct sock *other, + struct sock *newsk); + int (*unix_may_send)(struct socket *sock, struct socket *other); + + int (*socket_create)(int family, int type, int protocol, int kern); + int (*socket_post_create)(struct socket *sock, int family, int type, + int protocol, int kern); + int (*socket_bind)(struct socket *sock, struct sockaddr *address, + int addrlen); + int (*socket_connect)(struct socket *sock, struct sockaddr *address, + int addrlen); + int (*socket_listen)(struct socket *sock, int backlog); + int (*socket_accept)(struct socket *sock, struct socket *newsock); + int (*socket_sendmsg)(struct socket *sock, struct msghdr *msg, + int size); + int (*socket_recvmsg)(struct socket *sock, struct msghdr *msg, + int size, int flags); + int (*socket_getsockname)(struct socket *sock); + int (*socket_getpeername)(struct socket *sock); + int (*socket_getsockopt)(struct socket *sock, int level, int optname); + int (*socket_setsockopt)(struct socket *sock, int level, int optname); + int (*socket_shutdown)(struct socket *sock, int how); + int (*socket_sock_rcv_skb)(struct sock *sk, struct sk_buff *skb); + int (*socket_getpeersec_stream)(struct socket *sock, + char __user *optval, + int __user *optlen, unsigned len); + int (*socket_getpeersec_dgram)(struct socket *sock, + struct sk_buff *skb, u32 *secid); + int (*sk_alloc_security)(struct sock *sk, int family, gfp_t priority); + void (*sk_free_security)(struct sock *sk); + void (*sk_clone_security)(const struct sock *sk, struct sock *newsk); + void (*sk_getsecid)(struct sock *sk, u32 *secid); + void (*sock_graft)(struct sock *sk, struct socket *parent); + int (*inet_conn_request)(struct sock *sk, struct sk_buff *skb, + struct request_sock *req); + void (*inet_csk_clone)(struct sock *newsk, + const struct request_sock *req); + void (*inet_conn_established)(struct sock *sk, struct sk_buff *skb); + int (*secmark_relabel_packet)(u32 secid); + void (*secmark_refcount_inc)(void); + void (*secmark_refcount_dec)(void); + void (*req_classify_flow)(const struct request_sock *req, + struct flowi *fl); + int (*tun_dev_alloc_security)(void **security); + void (*tun_dev_free_security)(void *security); + int (*tun_dev_create)(void); + int (*tun_dev_attach_queue)(void *security); + int (*tun_dev_attach)(struct sock *sk, void *security); + int (*tun_dev_open)(void *security); +#endif /* CONFIG_SECURITY_NETWORK */ + +#ifdef CONFIG_SECURITY_NETWORK_XFRM + int (*xfrm_policy_alloc_security)(struct xfrm_sec_ctx **ctxp, + struct xfrm_user_sec_ctx *sec_ctx, + gfp_t gfp); + int (*xfrm_policy_clone_security)(struct xfrm_sec_ctx *old_ctx, + struct xfrm_sec_ctx **new_ctx); + void (*xfrm_policy_free_security)(struct xfrm_sec_ctx *ctx); + int (*xfrm_policy_delete_security)(struct xfrm_sec_ctx *ctx); + int (*xfrm_state_alloc)(struct xfrm_state *x, + struct xfrm_user_sec_ctx *sec_ctx); + int (*xfrm_state_alloc_acquire)(struct xfrm_state *x, + struct xfrm_sec_ctx *polsec, + u32 secid); + void (*xfrm_state_free_security)(struct xfrm_state *x); + int (*xfrm_state_delete_security)(struct xfrm_state *x); + int (*xfrm_policy_lookup)(struct xfrm_sec_ctx *ctx, u32 fl_secid, + u8 dir); + int (*xfrm_state_pol_flow_match)(struct xfrm_state *x, + struct xfrm_policy *xp, + const struct flowi *fl); + int (*xfrm_decode_session)(struct sk_buff *skb, u32 *secid, int ckall); +#endif /* CONFIG_SECURITY_NETWORK_XFRM */ + + /* key management security hooks */ +#ifdef CONFIG_KEYS + int (*key_alloc)(struct key *key, const struct cred *cred, + unsigned long flags); + void (*key_free)(struct key *key); + int (*key_permission)(key_ref_t key_ref, const struct cred *cred, + unsigned perm); + int (*key_getsecurity)(struct key *key, char **_buffer); +#endif /* CONFIG_KEYS */ + +#ifdef CONFIG_AUDIT + int (*audit_rule_init)(u32 field, u32 op, char *rulestr, + void **lsmrule); + int (*audit_rule_known)(struct audit_krule *krule); + int (*audit_rule_match)(u32 secid, u32 field, u32 op, void *lsmrule, + struct audit_context *actx); + void (*audit_rule_free)(void *lsmrule); +#endif /* CONFIG_AUDIT */ +}; + +/* prototypes */ +extern int security_module_enable(struct security_operations *ops); +extern int register_security(struct security_operations *ops); +extern void __init security_fixup_ops(struct security_operations *ops); +extern void reset_security_ops(void); + +#endif /* CONFIG_SECURITY */ + +#endif /* ! __LINUX_LSM_HOOKS_H */ diff --git a/include/linux/security.h b/include/linux/security.h index 18264ea9e314..f3d42c636f27 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -116,8 +116,6 @@ struct seq_file; extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb); -void reset_security_ops(void); - #ifdef CONFIG_MMU extern unsigned long mmap_min_addr; extern unsigned long dac_mmap_min_addr; @@ -1457,312 +1455,9 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @ctxlen points to the place to put the length of @ctx. * This is the main security structure. */ -struct security_operations { - char name[SECURITY_NAME_MAX + 1]; - - int (*binder_set_context_mgr) (struct task_struct *mgr); - int (*binder_transaction) (struct task_struct *from, - struct task_struct *to); - int (*binder_transfer_binder) (struct task_struct *from, - struct task_struct *to); - int (*binder_transfer_file) (struct task_struct *from, - struct task_struct *to, struct file *file); - - int (*ptrace_access_check) (struct task_struct *child, unsigned int mode); - int (*ptrace_traceme) (struct task_struct *parent); - int (*capget) (struct task_struct *target, - kernel_cap_t *effective, - kernel_cap_t *inheritable, kernel_cap_t *permitted); - int (*capset) (struct cred *new, - const struct cred *old, - const kernel_cap_t *effective, - const kernel_cap_t *inheritable, - const kernel_cap_t *permitted); - int (*capable) (const struct cred *cred, struct user_namespace *ns, - int cap, int audit); - int (*quotactl) (int cmds, int type, int id, struct super_block *sb); - int (*quota_on) (struct dentry *dentry); - int (*syslog) (int type); - int (*settime) (const struct timespec *ts, const struct timezone *tz); - int (*vm_enough_memory) (struct mm_struct *mm, long pages); - - int (*bprm_set_creds) (struct linux_binprm *bprm); - int (*bprm_check_security) (struct linux_binprm *bprm); - int (*bprm_secureexec) (struct linux_binprm *bprm); - void (*bprm_committing_creds) (struct linux_binprm *bprm); - void (*bprm_committed_creds) (struct linux_binprm *bprm); - - int (*sb_alloc_security) (struct super_block *sb); - void (*sb_free_security) (struct super_block *sb); - int (*sb_copy_data) (char *orig, char *copy); - int (*sb_remount) (struct super_block *sb, void *data); - int (*sb_kern_mount) (struct super_block *sb, int flags, void *data); - int (*sb_show_options) (struct seq_file *m, struct super_block *sb); - int (*sb_statfs) (struct dentry *dentry); - int (*sb_mount) (const char *dev_name, struct path *path, - const char *type, unsigned long flags, void *data); - int (*sb_umount) (struct vfsmount *mnt, int flags); - int (*sb_pivotroot) (struct path *old_path, - struct path *new_path); - int (*sb_set_mnt_opts) (struct super_block *sb, - struct security_mnt_opts *opts, - unsigned long kern_flags, - unsigned long *set_kern_flags); - int (*sb_clone_mnt_opts) (const struct super_block *oldsb, - struct super_block *newsb); - int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts); - int (*dentry_init_security) (struct dentry *dentry, int mode, - struct qstr *name, void **ctx, - u32 *ctxlen); - - -#ifdef CONFIG_SECURITY_PATH - int (*path_unlink) (struct path *dir, struct dentry *dentry); - int (*path_mkdir) (struct path *dir, struct dentry *dentry, umode_t mode); - int (*path_rmdir) (struct path *dir, struct dentry *dentry); - int (*path_mknod) (struct path *dir, struct dentry *dentry, umode_t mode, - unsigned int dev); - int (*path_truncate) (struct path *path); - int (*path_symlink) (struct path *dir, struct dentry *dentry, - const char *old_name); - int (*path_link) (struct dentry *old_dentry, struct path *new_dir, - struct dentry *new_dentry); - int (*path_rename) (struct path *old_dir, struct dentry *old_dentry, - struct path *new_dir, struct dentry *new_dentry); - int (*path_chmod) (struct path *path, umode_t mode); - int (*path_chown) (struct path *path, kuid_t uid, kgid_t gid); - int (*path_chroot) (struct path *path); -#endif - - int (*inode_alloc_security) (struct inode *inode); - void (*inode_free_security) (struct inode *inode); - int (*inode_init_security) (struct inode *inode, struct inode *dir, - const struct qstr *qstr, const char **name, - void **value, size_t *len); - int (*inode_create) (struct inode *dir, - struct dentry *dentry, umode_t mode); - int (*inode_link) (struct dentry *old_dentry, - struct inode *dir, struct dentry *new_dentry); - int (*inode_unlink) (struct inode *dir, struct dentry *dentry); - int (*inode_symlink) (struct inode *dir, - struct dentry *dentry, const char *old_name); - int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, umode_t mode); - int (*inode_rmdir) (struct inode *dir, struct dentry *dentry); - int (*inode_mknod) (struct inode *dir, struct dentry *dentry, - umode_t mode, dev_t dev); - int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry, - struct inode *new_dir, struct dentry *new_dentry); - int (*inode_readlink) (struct dentry *dentry); - int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd); - int (*inode_permission) (struct inode *inode, int mask); - int (*inode_setattr) (struct dentry *dentry, struct iattr *attr); - int (*inode_getattr) (const struct path *path); - int (*inode_setxattr) (struct dentry *dentry, const char *name, - const void *value, size_t size, int flags); - void (*inode_post_setxattr) (struct dentry *dentry, const char *name, - const void *value, size_t size, int flags); - int (*inode_getxattr) (struct dentry *dentry, const char *name); - int (*inode_listxattr) (struct dentry *dentry); - int (*inode_removexattr) (struct dentry *dentry, const char *name); - int (*inode_need_killpriv) (struct dentry *dentry); - int (*inode_killpriv) (struct dentry *dentry); - int (*inode_getsecurity) (const struct inode *inode, const char *name, void **buffer, bool alloc); - int (*inode_setsecurity) (struct inode *inode, const char *name, const void *value, size_t size, int flags); - int (*inode_listsecurity) (struct inode *inode, char *buffer, size_t buffer_size); - void (*inode_getsecid) (const struct inode *inode, u32 *secid); - - int (*file_permission) (struct file *file, int mask); - int (*file_alloc_security) (struct file *file); - void (*file_free_security) (struct file *file); - int (*file_ioctl) (struct file *file, unsigned int cmd, - unsigned long arg); - int (*mmap_addr) (unsigned long addr); - int (*mmap_file) (struct file *file, - unsigned long reqprot, unsigned long prot, - unsigned long flags); - int (*file_mprotect) (struct vm_area_struct *vma, - unsigned long reqprot, - unsigned long prot); - int (*file_lock) (struct file *file, unsigned int cmd); - int (*file_fcntl) (struct file *file, unsigned int cmd, - unsigned long arg); - void (*file_set_fowner) (struct file *file); - int (*file_send_sigiotask) (struct task_struct *tsk, - struct fown_struct *fown, int sig); - int (*file_receive) (struct file *file); - int (*file_open) (struct file *file, const struct cred *cred); - - int (*task_create) (unsigned long clone_flags); - void (*task_free) (struct task_struct *task); - int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp); - void (*cred_free) (struct cred *cred); - int (*cred_prepare)(struct cred *new, const struct cred *old, - gfp_t gfp); - void (*cred_transfer)(struct cred *new, const struct cred *old); - int (*kernel_act_as)(struct cred *new, u32 secid); - int (*kernel_create_files_as)(struct cred *new, struct inode *inode); - int (*kernel_fw_from_file)(struct file *file, char *buf, size_t size); - int (*kernel_module_request)(char *kmod_name); - int (*kernel_module_from_file)(struct file *file); - int (*task_fix_setuid) (struct cred *new, const struct cred *old, - int flags); - int (*task_setpgid) (struct task_struct *p, pid_t pgid); - int (*task_getpgid) (struct task_struct *p); - int (*task_getsid) (struct task_struct *p); - void (*task_getsecid) (struct task_struct *p, u32 *secid); - int (*task_setnice) (struct task_struct *p, int nice); - int (*task_setioprio) (struct task_struct *p, int ioprio); - int (*task_getioprio) (struct task_struct *p); - int (*task_setrlimit) (struct task_struct *p, unsigned int resource, - struct rlimit *new_rlim); - int (*task_setscheduler) (struct task_struct *p); - int (*task_getscheduler) (struct task_struct *p); - int (*task_movememory) (struct task_struct *p); - int (*task_kill) (struct task_struct *p, - struct siginfo *info, int sig, u32 secid); - int (*task_wait) (struct task_struct *p); - int (*task_prctl) (int option, unsigned long arg2, - unsigned long arg3, unsigned long arg4, - unsigned long arg5); - void (*task_to_inode) (struct task_struct *p, struct inode *inode); - - int (*ipc_permission) (struct kern_ipc_perm *ipcp, short flag); - void (*ipc_getsecid) (struct kern_ipc_perm *ipcp, u32 *secid); - - int (*msg_msg_alloc_security) (struct msg_msg *msg); - void (*msg_msg_free_security) (struct msg_msg *msg); - - int (*msg_queue_alloc_security) (struct msg_queue *msq); - void (*msg_queue_free_security) (struct msg_queue *msq); - int (*msg_queue_associate) (struct msg_queue *msq, int msqflg); - int (*msg_queue_msgctl) (struct msg_queue *msq, int cmd); - int (*msg_queue_msgsnd) (struct msg_queue *msq, - struct msg_msg *msg, int msqflg); - int (*msg_queue_msgrcv) (struct msg_queue *msq, - struct msg_msg *msg, - struct task_struct *target, - long type, int mode); - - int (*shm_alloc_security) (struct shmid_kernel *shp); - void (*shm_free_security) (struct shmid_kernel *shp); - int (*shm_associate) (struct shmid_kernel *shp, int shmflg); - int (*shm_shmctl) (struct shmid_kernel *shp, int cmd); - int (*shm_shmat) (struct shmid_kernel *shp, - char __user *shmaddr, int shmflg); - - int (*sem_alloc_security) (struct sem_array *sma); - void (*sem_free_security) (struct sem_array *sma); - int (*sem_associate) (struct sem_array *sma, int semflg); - int (*sem_semctl) (struct sem_array *sma, int cmd); - int (*sem_semop) (struct sem_array *sma, - struct sembuf *sops, unsigned nsops, int alter); - - int (*netlink_send) (struct sock *sk, struct sk_buff *skb); - - void (*d_instantiate) (struct dentry *dentry, struct inode *inode); - - int (*getprocattr) (struct task_struct *p, char *name, char **value); - int (*setprocattr) (struct task_struct *p, char *name, void *value, size_t size); - int (*ismaclabel) (const char *name); - int (*secid_to_secctx) (u32 secid, char **secdata, u32 *seclen); - int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid); - void (*release_secctx) (char *secdata, u32 seclen); - - int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen); - int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen); - int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen); - -#ifdef CONFIG_SECURITY_NETWORK - int (*unix_stream_connect) (struct sock *sock, struct sock *other, struct sock *newsk); - int (*unix_may_send) (struct socket *sock, struct socket *other); - - int (*socket_create) (int family, int type, int protocol, int kern); - int (*socket_post_create) (struct socket *sock, int family, - int type, int protocol, int kern); - int (*socket_bind) (struct socket *sock, - struct sockaddr *address, int addrlen); - int (*socket_connect) (struct socket *sock, - struct sockaddr *address, int addrlen); - int (*socket_listen) (struct socket *sock, int backlog); - int (*socket_accept) (struct socket *sock, struct socket *newsock); - int (*socket_sendmsg) (struct socket *sock, - struct msghdr *msg, int size); - int (*socket_recvmsg) (struct socket *sock, - struct msghdr *msg, int size, int flags); - int (*socket_getsockname) (struct socket *sock); - int (*socket_getpeername) (struct socket *sock); - int (*socket_getsockopt) (struct socket *sock, int level, int optname); - int (*socket_setsockopt) (struct socket *sock, int level, int optname); - int (*socket_shutdown) (struct socket *sock, int how); - int (*socket_sock_rcv_skb) (struct sock *sk, struct sk_buff *skb); - int (*socket_getpeersec_stream) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len); - int (*socket_getpeersec_dgram) (struct socket *sock, struct sk_buff *skb, u32 *secid); - int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority); - void (*sk_free_security) (struct sock *sk); - void (*sk_clone_security) (const struct sock *sk, struct sock *newsk); - void (*sk_getsecid) (struct sock *sk, u32 *secid); - void (*sock_graft) (struct sock *sk, struct socket *parent); - int (*inet_conn_request) (struct sock *sk, struct sk_buff *skb, - struct request_sock *req); - void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req); - void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb); - int (*secmark_relabel_packet) (u32 secid); - void (*secmark_refcount_inc) (void); - void (*secmark_refcount_dec) (void); - void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl); - int (*tun_dev_alloc_security) (void **security); - void (*tun_dev_free_security) (void *security); - int (*tun_dev_create) (void); - int (*tun_dev_attach_queue) (void *security); - int (*tun_dev_attach) (struct sock *sk, void *security); - int (*tun_dev_open) (void *security); -#endif /* CONFIG_SECURITY_NETWORK */ - -#ifdef CONFIG_SECURITY_NETWORK_XFRM - int (*xfrm_policy_alloc_security) (struct xfrm_sec_ctx **ctxp, - struct xfrm_user_sec_ctx *sec_ctx, gfp_t gfp); - int (*xfrm_policy_clone_security) (struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctx); - void (*xfrm_policy_free_security) (struct xfrm_sec_ctx *ctx); - int (*xfrm_policy_delete_security) (struct xfrm_sec_ctx *ctx); - int (*xfrm_state_alloc) (struct xfrm_state *x, - struct xfrm_user_sec_ctx *sec_ctx); - int (*xfrm_state_alloc_acquire) (struct xfrm_state *x, - struct xfrm_sec_ctx *polsec, - u32 secid); - void (*xfrm_state_free_security) (struct xfrm_state *x); - int (*xfrm_state_delete_security) (struct xfrm_state *x); - int (*xfrm_policy_lookup) (struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir); - int (*xfrm_state_pol_flow_match) (struct xfrm_state *x, - struct xfrm_policy *xp, - const struct flowi *fl); - int (*xfrm_decode_session) (struct sk_buff *skb, u32 *secid, int ckall); -#endif /* CONFIG_SECURITY_NETWORK_XFRM */ - - /* key management security hooks */ -#ifdef CONFIG_KEYS - int (*key_alloc) (struct key *key, const struct cred *cred, unsigned long flags); - void (*key_free) (struct key *key); - int (*key_permission) (key_ref_t key_ref, - const struct cred *cred, - unsigned perm); - int (*key_getsecurity)(struct key *key, char **_buffer); -#endif /* CONFIG_KEYS */ - -#ifdef CONFIG_AUDIT - int (*audit_rule_init) (u32 field, u32 op, char *rulestr, void **lsmrule); - int (*audit_rule_known) (struct audit_krule *krule); - int (*audit_rule_match) (u32 secid, u32 field, u32 op, void *lsmrule, - struct audit_context *actx); - void (*audit_rule_free) (void *lsmrule); -#endif /* CONFIG_AUDIT */ -}; /* prototypes */ extern int security_init(void); -extern int security_module_enable(struct security_operations *ops); -extern int register_security(struct security_operations *ops); -extern void __init security_fixup_ops(struct security_operations *ops); - /* Security operations */ int security_binder_set_context_mgr(struct task_struct *mgr); diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index e5f1561439db..fead41bd0440 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -12,7 +12,7 @@ * License. */ -#include +#include #include #include #include diff --git a/security/capability.c b/security/capability.c index 0d03fcc489a4..513015feffd7 100644 --- a/security/capability.c +++ b/security/capability.c @@ -10,7 +10,7 @@ * */ -#include +#include static int cap_binder_set_context_mgr(struct task_struct *mgr) { diff --git a/security/security.c b/security/security.c index 8e9b1f4b9b45..9c95fe0c8d75 100644 --- a/security/security.c +++ b/security/security.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 7dade28affba..40e3f7757ec7 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/security/smack/smack.h b/security/smack/smack.h index 49eada6266ec..262dad8dfbc6 100644 --- a/security/smack/smack.h +++ b/security/smack/smack.h @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include #include diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 57c88d52ffa5..2f7b46855f48 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -4,7 +4,7 @@ * Copyright (C) 2005-2011 NTT DATA CORPORATION */ -#include +#include #include "common.h" /** diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index 24aae2ae2b30..14557ffa7b4d 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -12,7 +12,7 @@ * */ -#include +#include #include #include #include -- cgit v1.2.3 From fe7bb272ee72b5cc377e02b556d0d718d12bbede Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Sat, 2 May 2015 15:10:53 -0700 Subject: LSM: Add the comment to lsm_hooks.h Add the large comment describing the content of the security_operations structure to lsm_hooks.h. This wasn't done in the previous (1/7) patch because it would have exceeded the mail list size limits. Signed-off-by: Casey Schaufler Acked-by: John Johansen Acked-by: Kees Cook Acked-by: Paul Moore Acked-by: Stephen Smalley Acked-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/lsm_hooks.h | 1279 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1279 insertions(+) (limited to 'include') diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h index c60f81b2d18c..b4c91de510c2 100644 --- a/include/linux/lsm_hooks.h +++ b/include/linux/lsm_hooks.h @@ -31,6 +31,1285 @@ #ifdef CONFIG_SECURITY +/** + * struct security_operations - main security structure + * + * Security module identifier. + * + * @name: + * A string that acts as a unique identifier for the LSM with max number + * of characters = SECURITY_NAME_MAX. + * + * Security hooks for program execution operations. + * + * @bprm_set_creds: + * Save security information in the bprm->security field, typically based + * on information about the bprm->file, for later use by the apply_creds + * hook. This hook may also optionally check permissions (e.g. for + * transitions between security domains). + * This hook may be called multiple times during a single execve, e.g. for + * interpreters. The hook can tell whether it has already been called by + * checking to see if @bprm->security is non-NULL. If so, then the hook + * may decide either to retain the security information saved earlier or + * to replace it. + * @bprm contains the linux_binprm structure. + * Return 0 if the hook is successful and permission is granted. + * @bprm_check_security: + * This hook mediates the point when a search for a binary handler will + * begin. It allows a check the @bprm->security value which is set in the + * preceding set_creds call. The primary difference from set_creds is + * that the argv list and envp list are reliably available in @bprm. This + * hook may be called multiple times during a single execve; and in each + * pass set_creds is called first. + * @bprm contains the linux_binprm structure. + * Return 0 if the hook is successful and permission is granted. + * @bprm_committing_creds: + * Prepare to install the new security attributes of a process being + * transformed by an execve operation, based on the old credentials + * pointed to by @current->cred and the information set in @bprm->cred by + * the bprm_set_creds hook. @bprm points to the linux_binprm structure. + * This hook is a good place to perform state changes on the process such + * as closing open file descriptors to which access will no longer be + * granted when the attributes are changed. This is called immediately + * before commit_creds(). + * @bprm_committed_creds: + * Tidy up after the installation of the new security attributes of a + * process being transformed by an execve operation. The new credentials + * have, by this point, been set to @current->cred. @bprm points to the + * linux_binprm structure. This hook is a good place to perform state + * changes on the process such as clearing out non-inheritable signal + * state. This is called immediately after commit_creds(). + * @bprm_secureexec: + * Return a boolean value (0 or 1) indicating whether a "secure exec" + * is required. The flag is passed in the auxiliary table + * on the initial stack to the ELF interpreter to indicate whether libc + * should enable secure mode. + * @bprm contains the linux_binprm structure. + * + * Security hooks for filesystem operations. + * + * @sb_alloc_security: + * Allocate and attach a security structure to the sb->s_security field. + * The s_security field is initialized to NULL when the structure is + * allocated. + * @sb contains the super_block structure to be modified. + * Return 0 if operation was successful. + * @sb_free_security: + * Deallocate and clear the sb->s_security field. + * @sb contains the super_block structure to be modified. + * @sb_statfs: + * Check permission before obtaining filesystem statistics for the @mnt + * mountpoint. + * @dentry is a handle on the superblock for the filesystem. + * Return 0 if permission is granted. + * @sb_mount: + * Check permission before an object specified by @dev_name is mounted on + * the mount point named by @nd. For an ordinary mount, @dev_name + * identifies a device if the file system type requires a device. For a + * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a + * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the + * pathname of the object being mounted. + * @dev_name contains the name for object being mounted. + * @path contains the path for mount point object. + * @type contains the filesystem type. + * @flags contains the mount flags. + * @data contains the filesystem-specific data. + * Return 0 if permission is granted. + * @sb_copy_data: + * Allow mount option data to be copied prior to parsing by the filesystem, + * so that the security module can extract security-specific mount + * options cleanly (a filesystem may modify the data e.g. with strsep()). + * This also allows the original mount data to be stripped of security- + * specific options to avoid having to make filesystems aware of them. + * @type the type of filesystem being mounted. + * @orig the original mount data copied from userspace. + * @copy copied data which will be passed to the security module. + * Returns 0 if the copy was successful. + * @sb_remount: + * Extracts security system specific mount options and verifies no changes + * are being made to those options. + * @sb superblock being remounted + * @data contains the filesystem-specific data. + * Return 0 if permission is granted. + * @sb_umount: + * Check permission before the @mnt file system is unmounted. + * @mnt contains the mounted file system. + * @flags contains the unmount flags, e.g. MNT_FORCE. + * Return 0 if permission is granted. + * @sb_pivotroot: + * Check permission before pivoting the root filesystem. + * @old_path contains the path for the new location of the + * current root (put_old). + * @new_path contains the path for the new root (new_root). + * Return 0 if permission is granted. + * @sb_set_mnt_opts: + * Set the security relevant mount options used for a superblock + * @sb the superblock to set security mount options for + * @opts binary data structure containing all lsm mount data + * @sb_clone_mnt_opts: + * Copy all security options from a given superblock to another + * @oldsb old superblock which contain information to clone + * @newsb new superblock which needs filled in + * @sb_parse_opts_str: + * Parse a string of security data filling in the opts structure + * @options string containing all mount options known by the LSM + * @opts binary data structure usable by the LSM + * @dentry_init_security: + * Compute a context for a dentry as the inode is not yet available + * since NFSv4 has no label backed by an EA anyway. + * @dentry dentry to use in calculating the context. + * @mode mode used to determine resource type. + * @name name of the last path component used to create file + * @ctx pointer to place the pointer to the resulting context in. + * @ctxlen point to place the length of the resulting context. + * + * + * Security hooks for inode operations. + * + * @inode_alloc_security: + * Allocate and attach a security structure to @inode->i_security. The + * i_security field is initialized to NULL when the inode structure is + * allocated. + * @inode contains the inode structure. + * Return 0 if operation was successful. + * @inode_free_security: + * @inode contains the inode structure. + * Deallocate the inode security structure and set @inode->i_security to + * NULL. + * @inode_init_security: + * Obtain the security attribute name suffix and value to set on a newly + * created inode and set up the incore security field for the new inode. + * This hook is called by the fs code as part of the inode creation + * transaction and provides for atomic labeling of the inode, unlike + * the post_create/mkdir/... hooks called by the VFS. The hook function + * is expected to allocate the name and value via kmalloc, with the caller + * being responsible for calling kfree after using them. + * If the security module does not use security attributes or does + * not wish to put a security attribute on this particular inode, + * then it should return -EOPNOTSUPP to skip this processing. + * @inode contains the inode structure of the newly created inode. + * @dir contains the inode structure of the parent directory. + * @qstr contains the last path component of the new object + * @name will be set to the allocated name suffix (e.g. selinux). + * @value will be set to the allocated attribute value. + * @len will be set to the length of the value. + * Returns 0 if @name and @value have been successfully set, + * -EOPNOTSUPP if no security attribute is needed, or + * -ENOMEM on memory allocation failure. + * @inode_create: + * Check permission to create a regular file. + * @dir contains inode structure of the parent of the new file. + * @dentry contains the dentry structure for the file to be created. + * @mode contains the file mode of the file to be created. + * Return 0 if permission is granted. + * @inode_link: + * Check permission before creating a new hard link to a file. + * @old_dentry contains the dentry structure for an existing + * link to the file. + * @dir contains the inode structure of the parent directory + * of the new link. + * @new_dentry contains the dentry structure for the new link. + * Return 0 if permission is granted. + * @path_link: + * Check permission before creating a new hard link to a file. + * @old_dentry contains the dentry structure for an existing link + * to the file. + * @new_dir contains the path structure of the parent directory of + * the new link. + * @new_dentry contains the dentry structure for the new link. + * Return 0 if permission is granted. + * @inode_unlink: + * Check the permission to remove a hard link to a file. + * @dir contains the inode structure of parent directory of the file. + * @dentry contains the dentry structure for file to be unlinked. + * Return 0 if permission is granted. + * @path_unlink: + * Check the permission to remove a hard link to a file. + * @dir contains the path structure of parent directory of the file. + * @dentry contains the dentry structure for file to be unlinked. + * Return 0 if permission is granted. + * @inode_symlink: + * Check the permission to create a symbolic link to a file. + * @dir contains the inode structure of parent directory of + * the symbolic link. + * @dentry contains the dentry structure of the symbolic link. + * @old_name contains the pathname of file. + * Return 0 if permission is granted. + * @path_symlink: + * Check the permission to create a symbolic link to a file. + * @dir contains the path structure of parent directory of + * the symbolic link. + * @dentry contains the dentry structure of the symbolic link. + * @old_name contains the pathname of file. + * Return 0 if permission is granted. + * @inode_mkdir: + * Check permissions to create a new directory in the existing directory + * associated with inode structure @dir. + * @dir contains the inode structure of parent of the directory + * to be created. + * @dentry contains the dentry structure of new directory. + * @mode contains the mode of new directory. + * Return 0 if permission is granted. + * @path_mkdir: + * Check permissions to create a new directory in the existing directory + * associated with path structure @path. + * @dir contains the path structure of parent of the directory + * to be created. + * @dentry contains the dentry structure of new directory. + * @mode contains the mode of new directory. + * Return 0 if permission is granted. + * @inode_rmdir: + * Check the permission to remove a directory. + * @dir contains the inode structure of parent of the directory + * to be removed. + * @dentry contains the dentry structure of directory to be removed. + * Return 0 if permission is granted. + * @path_rmdir: + * Check the permission to remove a directory. + * @dir contains the path structure of parent of the directory to be + * removed. + * @dentry contains the dentry structure of directory to be removed. + * Return 0 if permission is granted. + * @inode_mknod: + * Check permissions when creating a special file (or a socket or a fifo + * file created via the mknod system call). Note that if mknod operation + * is being done for a regular file, then the create hook will be called + * and not this hook. + * @dir contains the inode structure of parent of the new file. + * @dentry contains the dentry structure of the new file. + * @mode contains the mode of the new file. + * @dev contains the device number. + * Return 0 if permission is granted. + * @path_mknod: + * Check permissions when creating a file. Note that this hook is called + * even if mknod operation is being done for a regular file. + * @dir contains the path structure of parent of the new file. + * @dentry contains the dentry structure of the new file. + * @mode contains the mode of the new file. + * @dev contains the undecoded device number. Use new_decode_dev() to get + * the decoded device number. + * Return 0 if permission is granted. + * @inode_rename: + * Check for permission to rename a file or directory. + * @old_dir contains the inode structure for parent of the old link. + * @old_dentry contains the dentry structure of the old link. + * @new_dir contains the inode structure for parent of the new link. + * @new_dentry contains the dentry structure of the new link. + * Return 0 if permission is granted. + * @path_rename: + * Check for permission to rename a file or directory. + * @old_dir contains the path structure for parent of the old link. + * @old_dentry contains the dentry structure of the old link. + * @new_dir contains the path structure for parent of the new link. + * @new_dentry contains the dentry structure of the new link. + * Return 0 if permission is granted. + * @path_chmod: + * Check for permission to change DAC's permission of a file or directory. + * @dentry contains the dentry structure. + * @mnt contains the vfsmnt structure. + * @mode contains DAC's mode. + * Return 0 if permission is granted. + * @path_chown: + * Check for permission to change owner/group of a file or directory. + * @path contains the path structure. + * @uid contains new owner's ID. + * @gid contains new group's ID. + * Return 0 if permission is granted. + * @path_chroot: + * Check for permission to change root directory. + * @path contains the path structure. + * Return 0 if permission is granted. + * @inode_readlink: + * Check the permission to read the symbolic link. + * @dentry contains the dentry structure for the file link. + * Return 0 if permission is granted. + * @inode_follow_link: + * Check permission to follow a symbolic link when looking up a pathname. + * @dentry contains the dentry structure for the link. + * @nd contains the nameidata structure for the parent directory. + * Return 0 if permission is granted. + * @inode_permission: + * Check permission before accessing an inode. This hook is called by the + * existing Linux permission function, so a security module can use it to + * provide additional checking for existing Linux permission checks. + * Notice that this hook is called when a file is opened (as well as many + * other operations), whereas the file_security_ops permission hook is + * called when the actual read/write operations are performed. + * @inode contains the inode structure to check. + * @mask contains the permission mask. + * Return 0 if permission is granted. + * @inode_setattr: + * Check permission before setting file attributes. Note that the kernel + * call to notify_change is performed from several locations, whenever + * file attributes change (such as when a file is truncated, chown/chmod + * operations, transferring disk quotas, etc). + * @dentry contains the dentry structure for the file. + * @attr is the iattr structure containing the new file attributes. + * Return 0 if permission is granted. + * @path_truncate: + * Check permission before truncating a file. + * @path contains the path structure for the file. + * Return 0 if permission is granted. + * @inode_getattr: + * Check permission before obtaining file attributes. + * @mnt is the vfsmount where the dentry was looked up + * @dentry contains the dentry structure for the file. + * Return 0 if permission is granted. + * @inode_setxattr: + * Check permission before setting the extended attributes + * @value identified by @name for @dentry. + * Return 0 if permission is granted. + * @inode_post_setxattr: + * Update inode security field after successful setxattr operation. + * @value identified by @name for @dentry. + * @inode_getxattr: + * Check permission before obtaining the extended attributes + * identified by @name for @dentry. + * Return 0 if permission is granted. + * @inode_listxattr: + * Check permission before obtaining the list of extended attribute + * names for @dentry. + * Return 0 if permission is granted. + * @inode_removexattr: + * Check permission before removing the extended attribute + * identified by @name for @dentry. + * Return 0 if permission is granted. + * @inode_getsecurity: + * Retrieve a copy of the extended attribute representation of the + * security label associated with @name for @inode via @buffer. Note that + * @name is the remainder of the attribute name after the security prefix + * has been removed. @alloc is used to specify of the call should return a + * value via the buffer or just the value length Return size of buffer on + * success. + * @inode_setsecurity: + * Set the security label associated with @name for @inode from the + * extended attribute value @value. @size indicates the size of the + * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0. + * Note that @name is the remainder of the attribute name after the + * security. prefix has been removed. + * Return 0 on success. + * @inode_listsecurity: + * Copy the extended attribute names for the security labels + * associated with @inode into @buffer. The maximum size of @buffer + * is specified by @buffer_size. @buffer may be NULL to request + * the size of the buffer required. + * Returns number of bytes used/required on success. + * @inode_need_killpriv: + * Called when an inode has been changed. + * @dentry is the dentry being changed. + * Return <0 on error to abort the inode change operation. + * Return 0 if inode_killpriv does not need to be called. + * Return >0 if inode_killpriv does need to be called. + * @inode_killpriv: + * The setuid bit is being removed. Remove similar security labels. + * Called with the dentry->d_inode->i_mutex held. + * @dentry is the dentry being changed. + * Return 0 on success. If error is returned, then the operation + * causing setuid bit removal is failed. + * @inode_getsecid: + * Get the secid associated with the node. + * @inode contains a pointer to the inode. + * @secid contains a pointer to the location where result will be saved. + * In case of failure, @secid will be set to zero. + * + * Security hooks for file operations + * + * @file_permission: + * Check file permissions before accessing an open file. This hook is + * called by various operations that read or write files. A security + * module can use this hook to perform additional checking on these + * operations, e.g. to revalidate permissions on use to support privilege + * bracketing or policy changes. Notice that this hook is used when the + * actual read/write operations are performed, whereas the + * inode_security_ops hook is called when a file is opened (as well as + * many other operations). + * Caveat: Although this hook can be used to revalidate permissions for + * various system call operations that read or write files, it does not + * address the revalidation of permissions for memory-mapped files. + * Security modules must handle this separately if they need such + * revalidation. + * @file contains the file structure being accessed. + * @mask contains the requested permissions. + * Return 0 if permission is granted. + * @file_alloc_security: + * Allocate and attach a security structure to the file->f_security field. + * The security field is initialized to NULL when the structure is first + * created. + * @file contains the file structure to secure. + * Return 0 if the hook is successful and permission is granted. + * @file_free_security: + * Deallocate and free any security structures stored in file->f_security. + * @file contains the file structure being modified. + * @file_ioctl: + * @file contains the file structure. + * @cmd contains the operation to perform. + * @arg contains the operational arguments. + * Check permission for an ioctl operation on @file. Note that @arg + * sometimes represents a user space pointer; in other cases, it may be a + * simple integer value. When @arg represents a user space pointer, it + * should never be used by the security module. + * Return 0 if permission is granted. + * @mmap_addr : + * Check permissions for a mmap operation at @addr. + * @addr contains virtual address that will be used for the operation. + * Return 0 if permission is granted. + * @mmap_file : + * Check permissions for a mmap operation. The @file may be NULL, e.g. + * if mapping anonymous memory. + * @file contains the file structure for file to map (may be NULL). + * @reqprot contains the protection requested by the application. + * @prot contains the protection that will be applied by the kernel. + * @flags contains the operational flags. + * Return 0 if permission is granted. + * @file_mprotect: + * Check permissions before changing memory access permissions. + * @vma contains the memory region to modify. + * @reqprot contains the protection requested by the application. + * @prot contains the protection that will be applied by the kernel. + * Return 0 if permission is granted. + * @file_lock: + * Check permission before performing file locking operations. + * Note: this hook mediates both flock and fcntl style locks. + * @file contains the file structure. + * @cmd contains the posix-translated lock operation to perform + * (e.g. F_RDLCK, F_WRLCK). + * Return 0 if permission is granted. + * @file_fcntl: + * Check permission before allowing the file operation specified by @cmd + * from being performed on the file @file. Note that @arg sometimes + * represents a user space pointer; in other cases, it may be a simple + * integer value. When @arg represents a user space pointer, it should + * never be used by the security module. + * @file contains the file structure. + * @cmd contains the operation to be performed. + * @arg contains the operational arguments. + * Return 0 if permission is granted. + * @file_set_fowner: + * Save owner security information (typically from current->security) in + * file->f_security for later use by the send_sigiotask hook. + * @file contains the file structure to update. + * Return 0 on success. + * @file_send_sigiotask: + * Check permission for the file owner @fown to send SIGIO or SIGURG to the + * process @tsk. Note that this hook is sometimes called from interrupt. + * Note that the fown_struct, @fown, is never outside the context of a + * struct file, so the file structure (and associated security information) + * can always be obtained: + * container_of(fown, struct file, f_owner) + * @tsk contains the structure of task receiving signal. + * @fown contains the file owner information. + * @sig is the signal that will be sent. When 0, kernel sends SIGIO. + * Return 0 if permission is granted. + * @file_receive: + * This hook allows security modules to control the ability of a process + * to receive an open file descriptor via socket IPC. + * @file contains the file structure being received. + * Return 0 if permission is granted. + * @file_open + * Save open-time permission checking state for later use upon + * file_permission, and recheck access if anything has changed + * since inode_permission. + * + * Security hooks for task operations. + * + * @task_create: + * Check permission before creating a child process. See the clone(2) + * manual page for definitions of the @clone_flags. + * @clone_flags contains the flags indicating what should be shared. + * Return 0 if permission is granted. + * @task_free: + * @task task being freed + * Handle release of task-related resources. (Note that this can be called + * from interrupt context.) + * @cred_alloc_blank: + * @cred points to the credentials. + * @gfp indicates the atomicity of any memory allocations. + * Only allocate sufficient memory and attach to @cred such that + * cred_transfer() will not get ENOMEM. + * @cred_free: + * @cred points to the credentials. + * Deallocate and clear the cred->security field in a set of credentials. + * @cred_prepare: + * @new points to the new credentials. + * @old points to the original credentials. + * @gfp indicates the atomicity of any memory allocations. + * Prepare a new set of credentials by copying the data from the old set. + * @cred_transfer: + * @new points to the new credentials. + * @old points to the original credentials. + * Transfer data from original creds to new creds + * @kernel_act_as: + * Set the credentials for a kernel service to act as (subjective context). + * @new points to the credentials to be modified. + * @secid specifies the security ID to be set + * The current task must be the one that nominated @secid. + * Return 0 if successful. + * @kernel_create_files_as: + * Set the file creation context in a set of credentials to be the same as + * the objective context of the specified inode. + * @new points to the credentials to be modified. + * @inode points to the inode to use as a reference. + * The current task must be the one that nominated @inode. + * Return 0 if successful. + * @kernel_fw_from_file: + * Load firmware from userspace (not called for built-in firmware). + * @file contains the file structure pointing to the file containing + * the firmware to load. This argument will be NULL if the firmware + * was loaded via the uevent-triggered blob-based interface exposed + * by CONFIG_FW_LOADER_USER_HELPER. + * @buf pointer to buffer containing firmware contents. + * @size length of the firmware contents. + * Return 0 if permission is granted. + * @kernel_module_request: + * Ability to trigger the kernel to automatically upcall to userspace for + * userspace to load a kernel module with the given name. + * @kmod_name name of the module requested by the kernel + * Return 0 if successful. + * @kernel_module_from_file: + * Load a kernel module from userspace. + * @file contains the file structure pointing to the file containing + * the kernel module to load. If the module is being loaded from a blob, + * this argument will be NULL. + * Return 0 if permission is granted. + * @task_fix_setuid: + * Update the module's state after setting one or more of the user + * identity attributes of the current process. The @flags parameter + * indicates which of the set*uid system calls invoked this hook. If + * @new is the set of credentials that will be installed. Modifications + * should be made to this rather than to @current->cred. + * @old is the set of credentials that are being replaces + * @flags contains one of the LSM_SETID_* values. + * Return 0 on success. + * @task_setpgid: + * Check permission before setting the process group identifier of the + * process @p to @pgid. + * @p contains the task_struct for process being modified. + * @pgid contains the new pgid. + * Return 0 if permission is granted. + * @task_getpgid: + * Check permission before getting the process group identifier of the + * process @p. + * @p contains the task_struct for the process. + * Return 0 if permission is granted. + * @task_getsid: + * Check permission before getting the session identifier of the process + * @p. + * @p contains the task_struct for the process. + * Return 0 if permission is granted. + * @task_getsecid: + * Retrieve the security identifier of the process @p. + * @p contains the task_struct for the process and place is into @secid. + * In case of failure, @secid will be set to zero. + * + * @task_setnice: + * Check permission before setting the nice value of @p to @nice. + * @p contains the task_struct of process. + * @nice contains the new nice value. + * Return 0 if permission is granted. + * @task_setioprio + * Check permission before setting the ioprio value of @p to @ioprio. + * @p contains the task_struct of process. + * @ioprio contains the new ioprio value + * Return 0 if permission is granted. + * @task_getioprio + * Check permission before getting the ioprio value of @p. + * @p contains the task_struct of process. + * Return 0 if permission is granted. + * @task_setrlimit: + * Check permission before setting the resource limits of the current + * process for @resource to @new_rlim. The old resource limit values can + * be examined by dereferencing (current->signal->rlim + resource). + * @resource contains the resource whose limit is being set. + * @new_rlim contains the new limits for @resource. + * Return 0 if permission is granted. + * @task_setscheduler: + * Check permission before setting scheduling policy and/or parameters of + * process @p based on @policy and @lp. + * @p contains the task_struct for process. + * @policy contains the scheduling policy. + * @lp contains the scheduling parameters. + * Return 0 if permission is granted. + * @task_getscheduler: + * Check permission before obtaining scheduling information for process + * @p. + * @p contains the task_struct for process. + * Return 0 if permission is granted. + * @task_movememory + * Check permission before moving memory owned by process @p. + * @p contains the task_struct for process. + * Return 0 if permission is granted. + * @task_kill: + * Check permission before sending signal @sig to @p. @info can be NULL, + * the constant 1, or a pointer to a siginfo structure. If @info is 1 or + * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming + * from the kernel and should typically be permitted. + * SIGIO signals are handled separately by the send_sigiotask hook in + * file_security_ops. + * @p contains the task_struct for process. + * @info contains the signal information. + * @sig contains the signal value. + * @secid contains the sid of the process where the signal originated + * Return 0 if permission is granted. + * @task_wait: + * Check permission before allowing a process to reap a child process @p + * and collect its status information. + * @p contains the task_struct for process. + * Return 0 if permission is granted. + * @task_prctl: + * Check permission before performing a process control operation on the + * current process. + * @option contains the operation. + * @arg2 contains a argument. + * @arg3 contains a argument. + * @arg4 contains a argument. + * @arg5 contains a argument. + * Return -ENOSYS if no-one wanted to handle this op, any other value to + * cause prctl() to return immediately with that value. + * @task_to_inode: + * Set the security attributes for an inode based on an associated task's + * security attributes, e.g. for /proc/pid inodes. + * @p contains the task_struct for the task. + * @inode contains the inode structure for the inode. + * + * Security hooks for Netlink messaging. + * + * @netlink_send: + * Save security information for a netlink message so that permission + * checking can be performed when the message is processed. The security + * information can be saved using the eff_cap field of the + * netlink_skb_parms structure. Also may be used to provide fine + * grained control over message transmission. + * @sk associated sock of task sending the message. + * @skb contains the sk_buff structure for the netlink message. + * Return 0 if the information was successfully saved and message + * is allowed to be transmitted. + * + * Security hooks for Unix domain networking. + * + * @unix_stream_connect: + * Check permissions before establishing a Unix domain stream connection + * between @sock and @other. + * @sock contains the sock structure. + * @other contains the peer sock structure. + * @newsk contains the new sock structure. + * Return 0 if permission is granted. + * @unix_may_send: + * Check permissions before connecting or sending datagrams from @sock to + * @other. + * @sock contains the socket structure. + * @other contains the peer socket structure. + * Return 0 if permission is granted. + * + * The @unix_stream_connect and @unix_may_send hooks were necessary because + * Linux provides an alternative to the conventional file name space for Unix + * domain sockets. Whereas binding and connecting to sockets in the file name + * space is mediated by the typical file permissions (and caught by the mknod + * and permission hooks in inode_security_ops), binding and connecting to + * sockets in the abstract name space is completely unmediated. Sufficient + * control of Unix domain sockets in the abstract name space isn't possible + * using only the socket layer hooks, since we need to know the actual target + * socket, which is not looked up until we are inside the af_unix code. + * + * Security hooks for socket operations. + * + * @socket_create: + * Check permissions prior to creating a new socket. + * @family contains the requested protocol family. + * @type contains the requested communications type. + * @protocol contains the requested protocol. + * @kern set to 1 if a kernel socket. + * Return 0 if permission is granted. + * @socket_post_create: + * This hook allows a module to update or allocate a per-socket security + * structure. Note that the security field was not added directly to the + * socket structure, but rather, the socket security information is stored + * in the associated inode. Typically, the inode alloc_security hook will + * allocate and and attach security information to + * sock->inode->i_security. This hook may be used to update the + * sock->inode->i_security field with additional information that wasn't + * available when the inode was allocated. + * @sock contains the newly created socket structure. + * @family contains the requested protocol family. + * @type contains the requested communications type. + * @protocol contains the requested protocol. + * @kern set to 1 if a kernel socket. + * @socket_bind: + * Check permission before socket protocol layer bind operation is + * performed and the socket @sock is bound to the address specified in the + * @address parameter. + * @sock contains the socket structure. + * @address contains the address to bind to. + * @addrlen contains the length of address. + * Return 0 if permission is granted. + * @socket_connect: + * Check permission before socket protocol layer connect operation + * attempts to connect socket @sock to a remote address, @address. + * @sock contains the socket structure. + * @address contains the address of remote endpoint. + * @addrlen contains the length of address. + * Return 0 if permission is granted. + * @socket_listen: + * Check permission before socket protocol layer listen operation. + * @sock contains the socket structure. + * @backlog contains the maximum length for the pending connection queue. + * Return 0 if permission is granted. + * @socket_accept: + * Check permission before accepting a new connection. Note that the new + * socket, @newsock, has been created and some information copied to it, + * but the accept operation has not actually been performed. + * @sock contains the listening socket structure. + * @newsock contains the newly created server socket for connection. + * Return 0 if permission is granted. + * @socket_sendmsg: + * Check permission before transmitting a message to another socket. + * @sock contains the socket structure. + * @msg contains the message to be transmitted. + * @size contains the size of message. + * Return 0 if permission is granted. + * @socket_recvmsg: + * Check permission before receiving a message from a socket. + * @sock contains the socket structure. + * @msg contains the message structure. + * @size contains the size of message structure. + * @flags contains the operational flags. + * Return 0 if permission is granted. + * @socket_getsockname: + * Check permission before the local address (name) of the socket object + * @sock is retrieved. + * @sock contains the socket structure. + * Return 0 if permission is granted. + * @socket_getpeername: + * Check permission before the remote address (name) of a socket object + * @sock is retrieved. + * @sock contains the socket structure. + * Return 0 if permission is granted. + * @socket_getsockopt: + * Check permissions before retrieving the options associated with socket + * @sock. + * @sock contains the socket structure. + * @level contains the protocol level to retrieve option from. + * @optname contains the name of option to retrieve. + * Return 0 if permission is granted. + * @socket_setsockopt: + * Check permissions before setting the options associated with socket + * @sock. + * @sock contains the socket structure. + * @level contains the protocol level to set options for. + * @optname contains the name of the option to set. + * Return 0 if permission is granted. + * @socket_shutdown: + * Checks permission before all or part of a connection on the socket + * @sock is shut down. + * @sock contains the socket structure. + * @how contains the flag indicating how future sends and receives + * are handled. + * Return 0 if permission is granted. + * @socket_sock_rcv_skb: + * Check permissions on incoming network packets. This hook is distinct + * from Netfilter's IP input hooks since it is the first time that the + * incoming sk_buff @skb has been associated with a particular socket, @sk. + * Must not sleep inside this hook because some callers hold spinlocks. + * @sk contains the sock (not socket) associated with the incoming sk_buff. + * @skb contains the incoming network data. + * @socket_getpeersec_stream: + * This hook allows the security module to provide peer socket security + * state for unix or connected tcp sockets to userspace via getsockopt + * SO_GETPEERSEC. For tcp sockets this can be meaningful if the + * socket is associated with an ipsec SA. + * @sock is the local socket. + * @optval userspace memory where the security state is to be copied. + * @optlen userspace int where the module should copy the actual length + * of the security state. + * @len as input is the maximum length to copy to userspace provided + * by the caller. + * Return 0 if all is well, otherwise, typical getsockopt return + * values. + * @socket_getpeersec_dgram: + * This hook allows the security module to provide peer socket security + * state for udp sockets on a per-packet basis to userspace via + * getsockopt SO_GETPEERSEC. The application must first have indicated + * the IP_PASSSEC option via getsockopt. It can then retrieve the + * security state returned by this hook for a packet via the SCM_SECURITY + * ancillary message type. + * @skb is the skbuff for the packet being queried + * @secdata is a pointer to a buffer in which to copy the security data + * @seclen is the maximum length for @secdata + * Return 0 on success, error on failure. + * @sk_alloc_security: + * Allocate and attach a security structure to the sk->sk_security field, + * which is used to copy security attributes between local stream sockets. + * @sk_free_security: + * Deallocate security structure. + * @sk_clone_security: + * Clone/copy security structure. + * @sk_getsecid: + * Retrieve the LSM-specific secid for the sock to enable caching + * of network authorizations. + * @sock_graft: + * Sets the socket's isec sid to the sock's sid. + * @inet_conn_request: + * Sets the openreq's sid to socket's sid with MLS portion taken + * from peer sid. + * @inet_csk_clone: + * Sets the new child socket's sid to the openreq sid. + * @inet_conn_established: + * Sets the connection's peersid to the secmark on skb. + * @secmark_relabel_packet: + * check if the process should be allowed to relabel packets to + * the given secid + * @security_secmark_refcount_inc + * tells the LSM to increment the number of secmark labeling rules loaded + * @security_secmark_refcount_dec + * tells the LSM to decrement the number of secmark labeling rules loaded + * @req_classify_flow: + * Sets the flow's sid to the openreq sid. + * @tun_dev_alloc_security: + * This hook allows a module to allocate a security structure for a TUN + * device. + * @security pointer to a security structure pointer. + * Returns a zero on success, negative values on failure. + * @tun_dev_free_security: + * This hook allows a module to free the security structure for a TUN + * device. + * @security pointer to the TUN device's security structure + * @tun_dev_create: + * Check permissions prior to creating a new TUN device. + * @tun_dev_attach_queue: + * Check permissions prior to attaching to a TUN device queue. + * @security pointer to the TUN device's security structure. + * @tun_dev_attach: + * This hook can be used by the module to update any security state + * associated with the TUN device's sock structure. + * @sk contains the existing sock structure. + * @security pointer to the TUN device's security structure. + * @tun_dev_open: + * This hook can be used by the module to update any security state + * associated with the TUN device's security structure. + * @security pointer to the TUN devices's security structure. + * + * Security hooks for XFRM operations. + * + * @xfrm_policy_alloc_security: + * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy + * Database used by the XFRM system. + * @sec_ctx contains the security context information being provided by + * the user-level policy update program (e.g., setkey). + * Allocate a security structure to the xp->security field; the security + * field is initialized to NULL when the xfrm_policy is allocated. + * Return 0 if operation was successful (memory to allocate, legal context) + * @gfp is to specify the context for the allocation + * @xfrm_policy_clone_security: + * @old_ctx contains an existing xfrm_sec_ctx. + * @new_ctxp contains a new xfrm_sec_ctx being cloned from old. + * Allocate a security structure in new_ctxp that contains the + * information from the old_ctx structure. + * Return 0 if operation was successful (memory to allocate). + * @xfrm_policy_free_security: + * @ctx contains the xfrm_sec_ctx + * Deallocate xp->security. + * @xfrm_policy_delete_security: + * @ctx contains the xfrm_sec_ctx. + * Authorize deletion of xp->security. + * @xfrm_state_alloc: + * @x contains the xfrm_state being added to the Security Association + * Database by the XFRM system. + * @sec_ctx contains the security context information being provided by + * the user-level SA generation program (e.g., setkey or racoon). + * Allocate a security structure to the x->security field; the security + * field is initialized to NULL when the xfrm_state is allocated. Set the + * context to correspond to sec_ctx. Return 0 if operation was successful + * (memory to allocate, legal context). + * @xfrm_state_alloc_acquire: + * @x contains the xfrm_state being added to the Security Association + * Database by the XFRM system. + * @polsec contains the policy's security context. + * @secid contains the secid from which to take the mls portion of the + * context. + * Allocate a security structure to the x->security field; the security + * field is initialized to NULL when the xfrm_state is allocated. Set the + * context to correspond to secid. Return 0 if operation was successful + * (memory to allocate, legal context). + * @xfrm_state_free_security: + * @x contains the xfrm_state. + * Deallocate x->security. + * @xfrm_state_delete_security: + * @x contains the xfrm_state. + * Authorize deletion of x->security. + * @xfrm_policy_lookup: + * @ctx contains the xfrm_sec_ctx for which the access control is being + * checked. + * @fl_secid contains the flow security label that is used to authorize + * access to the policy xp. + * @dir contains the direction of the flow (input or output). + * Check permission when a flow selects a xfrm_policy for processing + * XFRMs on a packet. The hook is called when selecting either a + * per-socket policy or a generic xfrm policy. + * Return 0 if permission is granted, -ESRCH otherwise, or -errno + * on other errors. + * @xfrm_state_pol_flow_match: + * @x contains the state to match. + * @xp contains the policy to check for a match. + * @fl contains the flow to check for a match. + * Return 1 if there is a match. + * @xfrm_decode_session: + * @skb points to skb to decode. + * @secid points to the flow key secid to set. + * @ckall says if all xfrms used should be checked for same secid. + * Return 0 if ckall is zero or all xfrms used have the same secid. + * + * Security hooks affecting all Key Management operations + * + * @key_alloc: + * Permit allocation of a key and assign security data. Note that key does + * not have a serial number assigned at this point. + * @key points to the key. + * @flags is the allocation flags + * Return 0 if permission is granted, -ve error otherwise. + * @key_free: + * Notification of destruction; free security data. + * @key points to the key. + * No return value. + * @key_permission: + * See whether a specific operational right is granted to a process on a + * key. + * @key_ref refers to the key (key pointer + possession attribute bit). + * @cred points to the credentials to provide the context against which to + * evaluate the security data on the key. + * @perm describes the combination of permissions required of this key. + * Return 0 if permission is granted, -ve error otherwise. + * @key_getsecurity: + * Get a textual representation of the security context attached to a key + * for the purposes of honouring KEYCTL_GETSECURITY. This function + * allocates the storage for the NUL-terminated string and the caller + * should free it. + * @key points to the key to be queried. + * @_buffer points to a pointer that should be set to point to the + * resulting string (if no label or an error occurs). + * Return the length of the string (including terminating NUL) or -ve if + * an error. + * May also return 0 (and a NULL buffer pointer) if there is no label. + * + * Security hooks affecting all System V IPC operations. + * + * @ipc_permission: + * Check permissions for access to IPC + * @ipcp contains the kernel IPC permission structure + * @flag contains the desired (requested) permission set + * Return 0 if permission is granted. + * @ipc_getsecid: + * Get the secid associated with the ipc object. + * @ipcp contains the kernel IPC permission structure. + * @secid contains a pointer to the location where result will be saved. + * In case of failure, @secid will be set to zero. + * + * Security hooks for individual messages held in System V IPC message queues + * @msg_msg_alloc_security: + * Allocate and attach a security structure to the msg->security field. + * The security field is initialized to NULL when the structure is first + * created. + * @msg contains the message structure to be modified. + * Return 0 if operation was successful and permission is granted. + * @msg_msg_free_security: + * Deallocate the security structure for this message. + * @msg contains the message structure to be modified. + * + * Security hooks for System V IPC Message Queues + * + * @msg_queue_alloc_security: + * Allocate and attach a security structure to the + * msq->q_perm.security field. The security field is initialized to + * NULL when the structure is first created. + * @msq contains the message queue structure to be modified. + * Return 0 if operation was successful and permission is granted. + * @msg_queue_free_security: + * Deallocate security structure for this message queue. + * @msq contains the message queue structure to be modified. + * @msg_queue_associate: + * Check permission when a message queue is requested through the + * msgget system call. This hook is only called when returning the + * message queue identifier for an existing message queue, not when a + * new message queue is created. + * @msq contains the message queue to act upon. + * @msqflg contains the operation control flags. + * Return 0 if permission is granted. + * @msg_queue_msgctl: + * Check permission when a message control operation specified by @cmd + * is to be performed on the message queue @msq. + * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO. + * @msq contains the message queue to act upon. May be NULL. + * @cmd contains the operation to be performed. + * Return 0 if permission is granted. + * @msg_queue_msgsnd: + * Check permission before a message, @msg, is enqueued on the message + * queue, @msq. + * @msq contains the message queue to send message to. + * @msg contains the message to be enqueued. + * @msqflg contains operational flags. + * Return 0 if permission is granted. + * @msg_queue_msgrcv: + * Check permission before a message, @msg, is removed from the message + * queue, @msq. The @target task structure contains a pointer to the + * process that will be receiving the message (not equal to the current + * process when inline receives are being performed). + * @msq contains the message queue to retrieve message from. + * @msg contains the message destination. + * @target contains the task structure for recipient process. + * @type contains the type of message requested. + * @mode contains the operational flags. + * Return 0 if permission is granted. + * + * Security hooks for System V Shared Memory Segments + * + * @shm_alloc_security: + * Allocate and attach a security structure to the shp->shm_perm.security + * field. The security field is initialized to NULL when the structure is + * first created. + * @shp contains the shared memory structure to be modified. + * Return 0 if operation was successful and permission is granted. + * @shm_free_security: + * Deallocate the security struct for this memory segment. + * @shp contains the shared memory structure to be modified. + * @shm_associate: + * Check permission when a shared memory region is requested through the + * shmget system call. This hook is only called when returning the shared + * memory region identifier for an existing region, not when a new shared + * memory region is created. + * @shp contains the shared memory structure to be modified. + * @shmflg contains the operation control flags. + * Return 0 if permission is granted. + * @shm_shmctl: + * Check permission when a shared memory control operation specified by + * @cmd is to be performed on the shared memory region @shp. + * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO. + * @shp contains shared memory structure to be modified. + * @cmd contains the operation to be performed. + * Return 0 if permission is granted. + * @shm_shmat: + * Check permissions prior to allowing the shmat system call to attach the + * shared memory segment @shp to the data segment of the calling process. + * The attaching address is specified by @shmaddr. + * @shp contains the shared memory structure to be modified. + * @shmaddr contains the address to attach memory region to. + * @shmflg contains the operational flags. + * Return 0 if permission is granted. + * + * Security hooks for System V Semaphores + * + * @sem_alloc_security: + * Allocate and attach a security structure to the sma->sem_perm.security + * field. The security field is initialized to NULL when the structure is + * first created. + * @sma contains the semaphore structure + * Return 0 if operation was successful and permission is granted. + * @sem_free_security: + * deallocate security struct for this semaphore + * @sma contains the semaphore structure. + * @sem_associate: + * Check permission when a semaphore is requested through the semget + * system call. This hook is only called when returning the semaphore + * identifier for an existing semaphore, not when a new one must be + * created. + * @sma contains the semaphore structure. + * @semflg contains the operation control flags. + * Return 0 if permission is granted. + * @sem_semctl: + * Check permission when a semaphore operation specified by @cmd is to be + * performed on the semaphore @sma. The @sma may be NULL, e.g. for + * IPC_INFO or SEM_INFO. + * @sma contains the semaphore structure. May be NULL. + * @cmd contains the operation to be performed. + * Return 0 if permission is granted. + * @sem_semop + * Check permissions before performing operations on members of the + * semaphore set @sma. If the @alter flag is nonzero, the semaphore set + * may be modified. + * @sma contains the semaphore structure. + * @sops contains the operations to perform. + * @nsops contains the number of operations to perform. + * @alter contains the flag indicating whether changes are to be made. + * Return 0 if permission is granted. + * + * @binder_set_context_mgr + * Check whether @mgr is allowed to be the binder context manager. + * @mgr contains the task_struct for the task being registered. + * Return 0 if permission is granted. + * @binder_transaction + * Check whether @from is allowed to invoke a binder transaction call + * to @to. + * @from contains the task_struct for the sending task. + * @to contains the task_struct for the receiving task. + * @binder_transfer_binder + * Check whether @from is allowed to transfer a binder reference to @to. + * @from contains the task_struct for the sending task. + * @to contains the task_struct for the receiving task. + * @binder_transfer_file + * Check whether @from is allowed to transfer @file to @to. + * @from contains the task_struct for the sending task. + * @file contains the struct file being transferred. + * @to contains the task_struct for the receiving task. + * + * @ptrace_access_check: + * Check permission before allowing the current process to trace the + * @child process. + * Security modules may also want to perform a process tracing check + * during an execve in the set_security or apply_creds hooks of + * tracing check during an execve in the bprm_set_creds hook of + * binprm_security_ops if the process is being traced and its security + * attributes would be changed by the execve. + * @child contains the task_struct structure for the target process. + * @mode contains the PTRACE_MODE flags indicating the form of access. + * Return 0 if permission is granted. + * @ptrace_traceme: + * Check that the @parent process has sufficient permission to trace the + * current process before allowing the current process to present itself + * to the @parent process for tracing. + * @parent contains the task_struct structure for debugger process. + * Return 0 if permission is granted. + * @capget: + * Get the @effective, @inheritable, and @permitted capability sets for + * the @target process. The hook may also perform permission checking to + * determine if the current process is allowed to see the capability sets + * of the @target process. + * @target contains the task_struct structure for target process. + * @effective contains the effective capability set. + * @inheritable contains the inheritable capability set. + * @permitted contains the permitted capability set. + * Return 0 if the capability sets were successfully obtained. + * @capset: + * Set the @effective, @inheritable, and @permitted capability sets for + * the current process. + * @new contains the new credentials structure for target process. + * @old contains the current credentials structure for target process. + * @effective contains the effective capability set. + * @inheritable contains the inheritable capability set. + * @permitted contains the permitted capability set. + * Return 0 and update @new if permission is granted. + * @capable: + * Check whether the @tsk process has the @cap capability in the indicated + * credentials. + * @cred contains the credentials to use. + * @ns contains the user namespace we want the capability in + * @cap contains the capability . + * @audit: Whether to write an audit message or not + * Return 0 if the capability is granted for @tsk. + * @syslog: + * Check permission before accessing the kernel message ring or changing + * logging to the console. + * See the syslog(2) manual page for an explanation of the @type values. + * @type contains the type of action. + * @from_file indicates the context of action (if it came from /proc). + * Return 0 if permission is granted. + * @settime: + * Check permission to change the system time. + * struct timespec and timezone are defined in include/linux/time.h + * @ts contains new time + * @tz contains new timezone + * Return 0 if permission is granted. + * @vm_enough_memory: + * Check permissions for allocating a new virtual mapping. + * @mm contains the mm struct it is being added to. + * @pages contains the number of pages. + * Return 0 if permission is granted. + * + * @ismaclabel: + * Check if the extended attribute specified by @name + * represents a MAC label. Returns 1 if name is a MAC + * attribute otherwise returns 0. + * @name full extended attribute name to check against + * LSM as a MAC label. + * + * @secid_to_secctx: + * Convert secid to security context. If secdata is NULL the length of + * the result will be returned in seclen, but no secdata will be returned. + * This does mean that the length could change between calls to check the + * length and the next call which actually allocates and returns the + * secdata. + * @secid contains the security ID. + * @secdata contains the pointer that stores the converted security + * context. + * @seclen pointer which contains the length of the data + * @secctx_to_secid: + * Convert security context to secid. + * @secid contains the pointer to the generated security ID. + * @secdata contains the security context. + * + * @release_secctx: + * Release the security context. + * @secdata contains the security context. + * @seclen contains the length of the security context. + * + * Security hooks for Audit + * + * @audit_rule_init: + * Allocate and initialize an LSM audit rule structure. + * @field contains the required Audit action. + * Fields flags are defined in include/linux/audit.h + * @op contains the operator the rule uses. + * @rulestr contains the context where the rule will be applied to. + * @lsmrule contains a pointer to receive the result. + * Return 0 if @lsmrule has been successfully set, + * -EINVAL in case of an invalid rule. + * + * @audit_rule_known: + * Specifies whether given @rule contains any fields related to + * current LSM. + * @rule contains the audit rule of interest. + * Return 1 in case of relation found, 0 otherwise. + * + * @audit_rule_match: + * Determine if given @secid matches a rule previously approved + * by @audit_rule_known. + * @secid contains the security id in question. + * @field contains the field which relates to current LSM. + * @op contains the operator that will be used for matching. + * @rule points to the audit rule that will be checked against. + * @actx points to the audit context associated with the check. + * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure. + * + * @audit_rule_free: + * Deallocate the LSM audit rule structure previously allocated by + * audit_rule_init. + * @rule contains the allocated rule + * + * @inode_notifysecctx: + * Notify the security module of what the security context of an inode + * should be. Initializes the incore security context managed by the + * security module for this inode. Example usage: NFS client invokes + * this hook to initialize the security context in its incore inode to the + * value provided by the server for the file when the server returned the + * file's attributes to the client. + * + * Must be called with inode->i_mutex locked. + * + * @inode we wish to set the security context of. + * @ctx contains the string which we wish to set in the inode. + * @ctxlen contains the length of @ctx. + * + * @inode_setsecctx: + * Change the security context of an inode. Updates the + * incore security context managed by the security module and invokes the + * fs code as needed (via __vfs_setxattr_noperm) to update any backing + * xattrs that represent the context. Example usage: NFS server invokes + * this hook to change the security context in its incore inode and on the + * backing filesystem to a value provided by the client on a SETATTR + * operation. + * + * Must be called with inode->i_mutex locked. + * + * @dentry contains the inode we wish to set the security context of. + * @ctx contains the string which we wish to set in the inode. + * @ctxlen contains the length of @ctx. + * + * @inode_getsecctx: + * On success, returns 0 and fills out @ctx and @ctxlen with the security + * context for the given @inode. + * + * @inode we wish to get the security context of. + * @ctx is a pointer in which to place the allocated security context. + * @ctxlen points to the place to put the length of @ctx. + * This is the main security structure. + */ + struct security_operations { char name[SECURITY_NAME_MAX + 1]; -- cgit v1.2.3 From 346033a28fb16b83dac2a74d8025ff8ee64a2c9b Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Sat, 2 May 2015 15:11:14 -0700 Subject: LSM: Remove a comment from security.h Remove the large comment describing the content of the security_operations structure from security.h. This wasn't done in the previous (2/7) patch because it would have exceeded the mail list size limits. Signed-off-by: Casey Schaufler Acked-by: John Johansen Acked-by: Kees Cook Acked-by: Paul Moore Acked-by: Stephen Smalley Acked-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/security.h | 1270 ---------------------------------------------- 1 file changed, 1270 deletions(-) (limited to 'include') diff --git a/include/linux/security.h b/include/linux/security.h index f3d42c636f27..a2a100e7ac6e 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -186,1276 +186,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) opts->num_mnt_opts = 0; } -/** - * struct security_operations - main security structure - * - * Security module identifier. - * - * @name: - * A string that acts as a unique identifier for the LSM with max number - * of characters = SECURITY_NAME_MAX. - * - * Security hooks for program execution operations. - * - * @bprm_set_creds: - * Save security information in the bprm->security field, typically based - * on information about the bprm->file, for later use by the apply_creds - * hook. This hook may also optionally check permissions (e.g. for - * transitions between security domains). - * This hook may be called multiple times during a single execve, e.g. for - * interpreters. The hook can tell whether it has already been called by - * checking to see if @bprm->security is non-NULL. If so, then the hook - * may decide either to retain the security information saved earlier or - * to replace it. - * @bprm contains the linux_binprm structure. - * Return 0 if the hook is successful and permission is granted. - * @bprm_check_security: - * This hook mediates the point when a search for a binary handler will - * begin. It allows a check the @bprm->security value which is set in the - * preceding set_creds call. The primary difference from set_creds is - * that the argv list and envp list are reliably available in @bprm. This - * hook may be called multiple times during a single execve; and in each - * pass set_creds is called first. - * @bprm contains the linux_binprm structure. - * Return 0 if the hook is successful and permission is granted. - * @bprm_committing_creds: - * Prepare to install the new security attributes of a process being - * transformed by an execve operation, based on the old credentials - * pointed to by @current->cred and the information set in @bprm->cred by - * the bprm_set_creds hook. @bprm points to the linux_binprm structure. - * This hook is a good place to perform state changes on the process such - * as closing open file descriptors to which access will no longer be - * granted when the attributes are changed. This is called immediately - * before commit_creds(). - * @bprm_committed_creds: - * Tidy up after the installation of the new security attributes of a - * process being transformed by an execve operation. The new credentials - * have, by this point, been set to @current->cred. @bprm points to the - * linux_binprm structure. This hook is a good place to perform state - * changes on the process such as clearing out non-inheritable signal - * state. This is called immediately after commit_creds(). - * @bprm_secureexec: - * Return a boolean value (0 or 1) indicating whether a "secure exec" - * is required. The flag is passed in the auxiliary table - * on the initial stack to the ELF interpreter to indicate whether libc - * should enable secure mode. - * @bprm contains the linux_binprm structure. - * - * Security hooks for filesystem operations. - * - * @sb_alloc_security: - * Allocate and attach a security structure to the sb->s_security field. - * The s_security field is initialized to NULL when the structure is - * allocated. - * @sb contains the super_block structure to be modified. - * Return 0 if operation was successful. - * @sb_free_security: - * Deallocate and clear the sb->s_security field. - * @sb contains the super_block structure to be modified. - * @sb_statfs: - * Check permission before obtaining filesystem statistics for the @mnt - * mountpoint. - * @dentry is a handle on the superblock for the filesystem. - * Return 0 if permission is granted. - * @sb_mount: - * Check permission before an object specified by @dev_name is mounted on - * the mount point named by @nd. For an ordinary mount, @dev_name - * identifies a device if the file system type requires a device. For a - * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a - * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the - * pathname of the object being mounted. - * @dev_name contains the name for object being mounted. - * @path contains the path for mount point object. - * @type contains the filesystem type. - * @flags contains the mount flags. - * @data contains the filesystem-specific data. - * Return 0 if permission is granted. - * @sb_copy_data: - * Allow mount option data to be copied prior to parsing by the filesystem, - * so that the security module can extract security-specific mount - * options cleanly (a filesystem may modify the data e.g. with strsep()). - * This also allows the original mount data to be stripped of security- - * specific options to avoid having to make filesystems aware of them. - * @type the type of filesystem being mounted. - * @orig the original mount data copied from userspace. - * @copy copied data which will be passed to the security module. - * Returns 0 if the copy was successful. - * @sb_remount: - * Extracts security system specific mount options and verifies no changes - * are being made to those options. - * @sb superblock being remounted - * @data contains the filesystem-specific data. - * Return 0 if permission is granted. - * @sb_umount: - * Check permission before the @mnt file system is unmounted. - * @mnt contains the mounted file system. - * @flags contains the unmount flags, e.g. MNT_FORCE. - * Return 0 if permission is granted. - * @sb_pivotroot: - * Check permission before pivoting the root filesystem. - * @old_path contains the path for the new location of the current root (put_old). - * @new_path contains the path for the new root (new_root). - * Return 0 if permission is granted. - * @sb_set_mnt_opts: - * Set the security relevant mount options used for a superblock - * @sb the superblock to set security mount options for - * @opts binary data structure containing all lsm mount data - * @sb_clone_mnt_opts: - * Copy all security options from a given superblock to another - * @oldsb old superblock which contain information to clone - * @newsb new superblock which needs filled in - * @sb_parse_opts_str: - * Parse a string of security data filling in the opts structure - * @options string containing all mount options known by the LSM - * @opts binary data structure usable by the LSM - * @dentry_init_security: - * Compute a context for a dentry as the inode is not yet available - * since NFSv4 has no label backed by an EA anyway. - * @dentry dentry to use in calculating the context. - * @mode mode used to determine resource type. - * @name name of the last path component used to create file - * @ctx pointer to place the pointer to the resulting context in. - * @ctxlen point to place the length of the resulting context. - * - * - * Security hooks for inode operations. - * - * @inode_alloc_security: - * Allocate and attach a security structure to @inode->i_security. The - * i_security field is initialized to NULL when the inode structure is - * allocated. - * @inode contains the inode structure. - * Return 0 if operation was successful. - * @inode_free_security: - * @inode contains the inode structure. - * Deallocate the inode security structure and set @inode->i_security to - * NULL. - * @inode_init_security: - * Obtain the security attribute name suffix and value to set on a newly - * created inode and set up the incore security field for the new inode. - * This hook is called by the fs code as part of the inode creation - * transaction and provides for atomic labeling of the inode, unlike - * the post_create/mkdir/... hooks called by the VFS. The hook function - * is expected to allocate the name and value via kmalloc, with the caller - * being responsible for calling kfree after using them. - * If the security module does not use security attributes or does - * not wish to put a security attribute on this particular inode, - * then it should return -EOPNOTSUPP to skip this processing. - * @inode contains the inode structure of the newly created inode. - * @dir contains the inode structure of the parent directory. - * @qstr contains the last path component of the new object - * @name will be set to the allocated name suffix (e.g. selinux). - * @value will be set to the allocated attribute value. - * @len will be set to the length of the value. - * Returns 0 if @name and @value have been successfully set, - * -EOPNOTSUPP if no security attribute is needed, or - * -ENOMEM on memory allocation failure. - * @inode_create: - * Check permission to create a regular file. - * @dir contains inode structure of the parent of the new file. - * @dentry contains the dentry structure for the file to be created. - * @mode contains the file mode of the file to be created. - * Return 0 if permission is granted. - * @inode_link: - * Check permission before creating a new hard link to a file. - * @old_dentry contains the dentry structure for an existing link to the file. - * @dir contains the inode structure of the parent directory of the new link. - * @new_dentry contains the dentry structure for the new link. - * Return 0 if permission is granted. - * @path_link: - * Check permission before creating a new hard link to a file. - * @old_dentry contains the dentry structure for an existing link - * to the file. - * @new_dir contains the path structure of the parent directory of - * the new link. - * @new_dentry contains the dentry structure for the new link. - * Return 0 if permission is granted. - * @inode_unlink: - * Check the permission to remove a hard link to a file. - * @dir contains the inode structure of parent directory of the file. - * @dentry contains the dentry structure for file to be unlinked. - * Return 0 if permission is granted. - * @path_unlink: - * Check the permission to remove a hard link to a file. - * @dir contains the path structure of parent directory of the file. - * @dentry contains the dentry structure for file to be unlinked. - * Return 0 if permission is granted. - * @inode_symlink: - * Check the permission to create a symbolic link to a file. - * @dir contains the inode structure of parent directory of the symbolic link. - * @dentry contains the dentry structure of the symbolic link. - * @old_name contains the pathname of file. - * Return 0 if permission is granted. - * @path_symlink: - * Check the permission to create a symbolic link to a file. - * @dir contains the path structure of parent directory of - * the symbolic link. - * @dentry contains the dentry structure of the symbolic link. - * @old_name contains the pathname of file. - * Return 0 if permission is granted. - * @inode_mkdir: - * Check permissions to create a new directory in the existing directory - * associated with inode structure @dir. - * @dir contains the inode structure of parent of the directory to be created. - * @dentry contains the dentry structure of new directory. - * @mode contains the mode of new directory. - * Return 0 if permission is granted. - * @path_mkdir: - * Check permissions to create a new directory in the existing directory - * associated with path structure @path. - * @dir contains the path structure of parent of the directory - * to be created. - * @dentry contains the dentry structure of new directory. - * @mode contains the mode of new directory. - * Return 0 if permission is granted. - * @inode_rmdir: - * Check the permission to remove a directory. - * @dir contains the inode structure of parent of the directory to be removed. - * @dentry contains the dentry structure of directory to be removed. - * Return 0 if permission is granted. - * @path_rmdir: - * Check the permission to remove a directory. - * @dir contains the path structure of parent of the directory to be - * removed. - * @dentry contains the dentry structure of directory to be removed. - * Return 0 if permission is granted. - * @inode_mknod: - * Check permissions when creating a special file (or a socket or a fifo - * file created via the mknod system call). Note that if mknod operation - * is being done for a regular file, then the create hook will be called - * and not this hook. - * @dir contains the inode structure of parent of the new file. - * @dentry contains the dentry structure of the new file. - * @mode contains the mode of the new file. - * @dev contains the device number. - * Return 0 if permission is granted. - * @path_mknod: - * Check permissions when creating a file. Note that this hook is called - * even if mknod operation is being done for a regular file. - * @dir contains the path structure of parent of the new file. - * @dentry contains the dentry structure of the new file. - * @mode contains the mode of the new file. - * @dev contains the undecoded device number. Use new_decode_dev() to get - * the decoded device number. - * Return 0 if permission is granted. - * @inode_rename: - * Check for permission to rename a file or directory. - * @old_dir contains the inode structure for parent of the old link. - * @old_dentry contains the dentry structure of the old link. - * @new_dir contains the inode structure for parent of the new link. - * @new_dentry contains the dentry structure of the new link. - * Return 0 if permission is granted. - * @path_rename: - * Check for permission to rename a file or directory. - * @old_dir contains the path structure for parent of the old link. - * @old_dentry contains the dentry structure of the old link. - * @new_dir contains the path structure for parent of the new link. - * @new_dentry contains the dentry structure of the new link. - * Return 0 if permission is granted. - * @path_chmod: - * Check for permission to change DAC's permission of a file or directory. - * @dentry contains the dentry structure. - * @mnt contains the vfsmnt structure. - * @mode contains DAC's mode. - * Return 0 if permission is granted. - * @path_chown: - * Check for permission to change owner/group of a file or directory. - * @path contains the path structure. - * @uid contains new owner's ID. - * @gid contains new group's ID. - * Return 0 if permission is granted. - * @path_chroot: - * Check for permission to change root directory. - * @path contains the path structure. - * Return 0 if permission is granted. - * @inode_readlink: - * Check the permission to read the symbolic link. - * @dentry contains the dentry structure for the file link. - * Return 0 if permission is granted. - * @inode_follow_link: - * Check permission to follow a symbolic link when looking up a pathname. - * @dentry contains the dentry structure for the link. - * @nd contains the nameidata structure for the parent directory. - * Return 0 if permission is granted. - * @inode_permission: - * Check permission before accessing an inode. This hook is called by the - * existing Linux permission function, so a security module can use it to - * provide additional checking for existing Linux permission checks. - * Notice that this hook is called when a file is opened (as well as many - * other operations), whereas the file_security_ops permission hook is - * called when the actual read/write operations are performed. - * @inode contains the inode structure to check. - * @mask contains the permission mask. - * Return 0 if permission is granted. - * @inode_setattr: - * Check permission before setting file attributes. Note that the kernel - * call to notify_change is performed from several locations, whenever - * file attributes change (such as when a file is truncated, chown/chmod - * operations, transferring disk quotas, etc). - * @dentry contains the dentry structure for the file. - * @attr is the iattr structure containing the new file attributes. - * Return 0 if permission is granted. - * @path_truncate: - * Check permission before truncating a file. - * @path contains the path structure for the file. - * Return 0 if permission is granted. - * @inode_getattr: - * Check permission before obtaining file attributes. - * @mnt is the vfsmount where the dentry was looked up - * @dentry contains the dentry structure for the file. - * Return 0 if permission is granted. - * @inode_setxattr: - * Check permission before setting the extended attributes - * @value identified by @name for @dentry. - * Return 0 if permission is granted. - * @inode_post_setxattr: - * Update inode security field after successful setxattr operation. - * @value identified by @name for @dentry. - * @inode_getxattr: - * Check permission before obtaining the extended attributes - * identified by @name for @dentry. - * Return 0 if permission is granted. - * @inode_listxattr: - * Check permission before obtaining the list of extended attribute - * names for @dentry. - * Return 0 if permission is granted. - * @inode_removexattr: - * Check permission before removing the extended attribute - * identified by @name for @dentry. - * Return 0 if permission is granted. - * @inode_getsecurity: - * Retrieve a copy of the extended attribute representation of the - * security label associated with @name for @inode via @buffer. Note that - * @name is the remainder of the attribute name after the security prefix - * has been removed. @alloc is used to specify of the call should return a - * value via the buffer or just the value length Return size of buffer on - * success. - * @inode_setsecurity: - * Set the security label associated with @name for @inode from the - * extended attribute value @value. @size indicates the size of the - * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0. - * Note that @name is the remainder of the attribute name after the - * security. prefix has been removed. - * Return 0 on success. - * @inode_listsecurity: - * Copy the extended attribute names for the security labels - * associated with @inode into @buffer. The maximum size of @buffer - * is specified by @buffer_size. @buffer may be NULL to request - * the size of the buffer required. - * Returns number of bytes used/required on success. - * @inode_need_killpriv: - * Called when an inode has been changed. - * @dentry is the dentry being changed. - * Return <0 on error to abort the inode change operation. - * Return 0 if inode_killpriv does not need to be called. - * Return >0 if inode_killpriv does need to be called. - * @inode_killpriv: - * The setuid bit is being removed. Remove similar security labels. - * Called with the dentry->d_inode->i_mutex held. - * @dentry is the dentry being changed. - * Return 0 on success. If error is returned, then the operation - * causing setuid bit removal is failed. - * @inode_getsecid: - * Get the secid associated with the node. - * @inode contains a pointer to the inode. - * @secid contains a pointer to the location where result will be saved. - * In case of failure, @secid will be set to zero. - * - * Security hooks for file operations - * - * @file_permission: - * Check file permissions before accessing an open file. This hook is - * called by various operations that read or write files. A security - * module can use this hook to perform additional checking on these - * operations, e.g. to revalidate permissions on use to support privilege - * bracketing or policy changes. Notice that this hook is used when the - * actual read/write operations are performed, whereas the - * inode_security_ops hook is called when a file is opened (as well as - * many other operations). - * Caveat: Although this hook can be used to revalidate permissions for - * various system call operations that read or write files, it does not - * address the revalidation of permissions for memory-mapped files. - * Security modules must handle this separately if they need such - * revalidation. - * @file contains the file structure being accessed. - * @mask contains the requested permissions. - * Return 0 if permission is granted. - * @file_alloc_security: - * Allocate and attach a security structure to the file->f_security field. - * The security field is initialized to NULL when the structure is first - * created. - * @file contains the file structure to secure. - * Return 0 if the hook is successful and permission is granted. - * @file_free_security: - * Deallocate and free any security structures stored in file->f_security. - * @file contains the file structure being modified. - * @file_ioctl: - * @file contains the file structure. - * @cmd contains the operation to perform. - * @arg contains the operational arguments. - * Check permission for an ioctl operation on @file. Note that @arg - * sometimes represents a user space pointer; in other cases, it may be a - * simple integer value. When @arg represents a user space pointer, it - * should never be used by the security module. - * Return 0 if permission is granted. - * @mmap_addr : - * Check permissions for a mmap operation at @addr. - * @addr contains virtual address that will be used for the operation. - * Return 0 if permission is granted. - * @mmap_file : - * Check permissions for a mmap operation. The @file may be NULL, e.g. - * if mapping anonymous memory. - * @file contains the file structure for file to map (may be NULL). - * @reqprot contains the protection requested by the application. - * @prot contains the protection that will be applied by the kernel. - * @flags contains the operational flags. - * Return 0 if permission is granted. - * @file_mprotect: - * Check permissions before changing memory access permissions. - * @vma contains the memory region to modify. - * @reqprot contains the protection requested by the application. - * @prot contains the protection that will be applied by the kernel. - * Return 0 if permission is granted. - * @file_lock: - * Check permission before performing file locking operations. - * Note: this hook mediates both flock and fcntl style locks. - * @file contains the file structure. - * @cmd contains the posix-translated lock operation to perform - * (e.g. F_RDLCK, F_WRLCK). - * Return 0 if permission is granted. - * @file_fcntl: - * Check permission before allowing the file operation specified by @cmd - * from being performed on the file @file. Note that @arg sometimes - * represents a user space pointer; in other cases, it may be a simple - * integer value. When @arg represents a user space pointer, it should - * never be used by the security module. - * @file contains the file structure. - * @cmd contains the operation to be performed. - * @arg contains the operational arguments. - * Return 0 if permission is granted. - * @file_set_fowner: - * Save owner security information (typically from current->security) in - * file->f_security for later use by the send_sigiotask hook. - * @file contains the file structure to update. - * Return 0 on success. - * @file_send_sigiotask: - * Check permission for the file owner @fown to send SIGIO or SIGURG to the - * process @tsk. Note that this hook is sometimes called from interrupt. - * Note that the fown_struct, @fown, is never outside the context of a - * struct file, so the file structure (and associated security information) - * can always be obtained: - * container_of(fown, struct file, f_owner) - * @tsk contains the structure of task receiving signal. - * @fown contains the file owner information. - * @sig is the signal that will be sent. When 0, kernel sends SIGIO. - * Return 0 if permission is granted. - * @file_receive: - * This hook allows security modules to control the ability of a process - * to receive an open file descriptor via socket IPC. - * @file contains the file structure being received. - * Return 0 if permission is granted. - * @file_open - * Save open-time permission checking state for later use upon - * file_permission, and recheck access if anything has changed - * since inode_permission. - * - * Security hooks for task operations. - * - * @task_create: - * Check permission before creating a child process. See the clone(2) - * manual page for definitions of the @clone_flags. - * @clone_flags contains the flags indicating what should be shared. - * Return 0 if permission is granted. - * @task_free: - * @task task being freed - * Handle release of task-related resources. (Note that this can be called - * from interrupt context.) - * @cred_alloc_blank: - * @cred points to the credentials. - * @gfp indicates the atomicity of any memory allocations. - * Only allocate sufficient memory and attach to @cred such that - * cred_transfer() will not get ENOMEM. - * @cred_free: - * @cred points to the credentials. - * Deallocate and clear the cred->security field in a set of credentials. - * @cred_prepare: - * @new points to the new credentials. - * @old points to the original credentials. - * @gfp indicates the atomicity of any memory allocations. - * Prepare a new set of credentials by copying the data from the old set. - * @cred_transfer: - * @new points to the new credentials. - * @old points to the original credentials. - * Transfer data from original creds to new creds - * @kernel_act_as: - * Set the credentials for a kernel service to act as (subjective context). - * @new points to the credentials to be modified. - * @secid specifies the security ID to be set - * The current task must be the one that nominated @secid. - * Return 0 if successful. - * @kernel_create_files_as: - * Set the file creation context in a set of credentials to be the same as - * the objective context of the specified inode. - * @new points to the credentials to be modified. - * @inode points to the inode to use as a reference. - * The current task must be the one that nominated @inode. - * Return 0 if successful. - * @kernel_fw_from_file: - * Load firmware from userspace (not called for built-in firmware). - * @file contains the file structure pointing to the file containing - * the firmware to load. This argument will be NULL if the firmware - * was loaded via the uevent-triggered blob-based interface exposed - * by CONFIG_FW_LOADER_USER_HELPER. - * @buf pointer to buffer containing firmware contents. - * @size length of the firmware contents. - * Return 0 if permission is granted. - * @kernel_module_request: - * Ability to trigger the kernel to automatically upcall to userspace for - * userspace to load a kernel module with the given name. - * @kmod_name name of the module requested by the kernel - * Return 0 if successful. - * @kernel_module_from_file: - * Load a kernel module from userspace. - * @file contains the file structure pointing to the file containing - * the kernel module to load. If the module is being loaded from a blob, - * this argument will be NULL. - * Return 0 if permission is granted. - * @task_fix_setuid: - * Update the module's state after setting one or more of the user - * identity attributes of the current process. The @flags parameter - * indicates which of the set*uid system calls invoked this hook. If - * @new is the set of credentials that will be installed. Modifications - * should be made to this rather than to @current->cred. - * @old is the set of credentials that are being replaces - * @flags contains one of the LSM_SETID_* values. - * Return 0 on success. - * @task_setpgid: - * Check permission before setting the process group identifier of the - * process @p to @pgid. - * @p contains the task_struct for process being modified. - * @pgid contains the new pgid. - * Return 0 if permission is granted. - * @task_getpgid: - * Check permission before getting the process group identifier of the - * process @p. - * @p contains the task_struct for the process. - * Return 0 if permission is granted. - * @task_getsid: - * Check permission before getting the session identifier of the process - * @p. - * @p contains the task_struct for the process. - * Return 0 if permission is granted. - * @task_getsecid: - * Retrieve the security identifier of the process @p. - * @p contains the task_struct for the process and place is into @secid. - * In case of failure, @secid will be set to zero. - * - * @task_setnice: - * Check permission before setting the nice value of @p to @nice. - * @p contains the task_struct of process. - * @nice contains the new nice value. - * Return 0 if permission is granted. - * @task_setioprio - * Check permission before setting the ioprio value of @p to @ioprio. - * @p contains the task_struct of process. - * @ioprio contains the new ioprio value - * Return 0 if permission is granted. - * @task_getioprio - * Check permission before getting the ioprio value of @p. - * @p contains the task_struct of process. - * Return 0 if permission is granted. - * @task_setrlimit: - * Check permission before setting the resource limits of the current - * process for @resource to @new_rlim. The old resource limit values can - * be examined by dereferencing (current->signal->rlim + resource). - * @resource contains the resource whose limit is being set. - * @new_rlim contains the new limits for @resource. - * Return 0 if permission is granted. - * @task_setscheduler: - * Check permission before setting scheduling policy and/or parameters of - * process @p based on @policy and @lp. - * @p contains the task_struct for process. - * @policy contains the scheduling policy. - * @lp contains the scheduling parameters. - * Return 0 if permission is granted. - * @task_getscheduler: - * Check permission before obtaining scheduling information for process - * @p. - * @p contains the task_struct for process. - * Return 0 if permission is granted. - * @task_movememory - * Check permission before moving memory owned by process @p. - * @p contains the task_struct for process. - * Return 0 if permission is granted. - * @task_kill: - * Check permission before sending signal @sig to @p. @info can be NULL, - * the constant 1, or a pointer to a siginfo structure. If @info is 1 or - * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming - * from the kernel and should typically be permitted. - * SIGIO signals are handled separately by the send_sigiotask hook in - * file_security_ops. - * @p contains the task_struct for process. - * @info contains the signal information. - * @sig contains the signal value. - * @secid contains the sid of the process where the signal originated - * Return 0 if permission is granted. - * @task_wait: - * Check permission before allowing a process to reap a child process @p - * and collect its status information. - * @p contains the task_struct for process. - * Return 0 if permission is granted. - * @task_prctl: - * Check permission before performing a process control operation on the - * current process. - * @option contains the operation. - * @arg2 contains a argument. - * @arg3 contains a argument. - * @arg4 contains a argument. - * @arg5 contains a argument. - * Return -ENOSYS if no-one wanted to handle this op, any other value to - * cause prctl() to return immediately with that value. - * @task_to_inode: - * Set the security attributes for an inode based on an associated task's - * security attributes, e.g. for /proc/pid inodes. - * @p contains the task_struct for the task. - * @inode contains the inode structure for the inode. - * - * Security hooks for Netlink messaging. - * - * @netlink_send: - * Save security information for a netlink message so that permission - * checking can be performed when the message is processed. The security - * information can be saved using the eff_cap field of the - * netlink_skb_parms structure. Also may be used to provide fine - * grained control over message transmission. - * @sk associated sock of task sending the message. - * @skb contains the sk_buff structure for the netlink message. - * Return 0 if the information was successfully saved and message - * is allowed to be transmitted. - * - * Security hooks for Unix domain networking. - * - * @unix_stream_connect: - * Check permissions before establishing a Unix domain stream connection - * between @sock and @other. - * @sock contains the sock structure. - * @other contains the peer sock structure. - * @newsk contains the new sock structure. - * Return 0 if permission is granted. - * @unix_may_send: - * Check permissions before connecting or sending datagrams from @sock to - * @other. - * @sock contains the socket structure. - * @other contains the peer socket structure. - * Return 0 if permission is granted. - * - * The @unix_stream_connect and @unix_may_send hooks were necessary because - * Linux provides an alternative to the conventional file name space for Unix - * domain sockets. Whereas binding and connecting to sockets in the file name - * space is mediated by the typical file permissions (and caught by the mknod - * and permission hooks in inode_security_ops), binding and connecting to - * sockets in the abstract name space is completely unmediated. Sufficient - * control of Unix domain sockets in the abstract name space isn't possible - * using only the socket layer hooks, since we need to know the actual target - * socket, which is not looked up until we are inside the af_unix code. - * - * Security hooks for socket operations. - * - * @socket_create: - * Check permissions prior to creating a new socket. - * @family contains the requested protocol family. - * @type contains the requested communications type. - * @protocol contains the requested protocol. - * @kern set to 1 if a kernel socket. - * Return 0 if permission is granted. - * @socket_post_create: - * This hook allows a module to update or allocate a per-socket security - * structure. Note that the security field was not added directly to the - * socket structure, but rather, the socket security information is stored - * in the associated inode. Typically, the inode alloc_security hook will - * allocate and and attach security information to - * sock->inode->i_security. This hook may be used to update the - * sock->inode->i_security field with additional information that wasn't - * available when the inode was allocated. - * @sock contains the newly created socket structure. - * @family contains the requested protocol family. - * @type contains the requested communications type. - * @protocol contains the requested protocol. - * @kern set to 1 if a kernel socket. - * @socket_bind: - * Check permission before socket protocol layer bind operation is - * performed and the socket @sock is bound to the address specified in the - * @address parameter. - * @sock contains the socket structure. - * @address contains the address to bind to. - * @addrlen contains the length of address. - * Return 0 if permission is granted. - * @socket_connect: - * Check permission before socket protocol layer connect operation - * attempts to connect socket @sock to a remote address, @address. - * @sock contains the socket structure. - * @address contains the address of remote endpoint. - * @addrlen contains the length of address. - * Return 0 if permission is granted. - * @socket_listen: - * Check permission before socket protocol layer listen operation. - * @sock contains the socket structure. - * @backlog contains the maximum length for the pending connection queue. - * Return 0 if permission is granted. - * @socket_accept: - * Check permission before accepting a new connection. Note that the new - * socket, @newsock, has been created and some information copied to it, - * but the accept operation has not actually been performed. - * @sock contains the listening socket structure. - * @newsock contains the newly created server socket for connection. - * Return 0 if permission is granted. - * @socket_sendmsg: - * Check permission before transmitting a message to another socket. - * @sock contains the socket structure. - * @msg contains the message to be transmitted. - * @size contains the size of message. - * Return 0 if permission is granted. - * @socket_recvmsg: - * Check permission before receiving a message from a socket. - * @sock contains the socket structure. - * @msg contains the message structure. - * @size contains the size of message structure. - * @flags contains the operational flags. - * Return 0 if permission is granted. - * @socket_getsockname: - * Check permission before the local address (name) of the socket object - * @sock is retrieved. - * @sock contains the socket structure. - * Return 0 if permission is granted. - * @socket_getpeername: - * Check permission before the remote address (name) of a socket object - * @sock is retrieved. - * @sock contains the socket structure. - * Return 0 if permission is granted. - * @socket_getsockopt: - * Check permissions before retrieving the options associated with socket - * @sock. - * @sock contains the socket structure. - * @level contains the protocol level to retrieve option from. - * @optname contains the name of option to retrieve. - * Return 0 if permission is granted. - * @socket_setsockopt: - * Check permissions before setting the options associated with socket - * @sock. - * @sock contains the socket structure. - * @level contains the protocol level to set options for. - * @optname contains the name of the option to set. - * Return 0 if permission is granted. - * @socket_shutdown: - * Checks permission before all or part of a connection on the socket - * @sock is shut down. - * @sock contains the socket structure. - * @how contains the flag indicating how future sends and receives are handled. - * Return 0 if permission is granted. - * @socket_sock_rcv_skb: - * Check permissions on incoming network packets. This hook is distinct - * from Netfilter's IP input hooks since it is the first time that the - * incoming sk_buff @skb has been associated with a particular socket, @sk. - * Must not sleep inside this hook because some callers hold spinlocks. - * @sk contains the sock (not socket) associated with the incoming sk_buff. - * @skb contains the incoming network data. - * @socket_getpeersec_stream: - * This hook allows the security module to provide peer socket security - * state for unix or connected tcp sockets to userspace via getsockopt - * SO_GETPEERSEC. For tcp sockets this can be meaningful if the - * socket is associated with an ipsec SA. - * @sock is the local socket. - * @optval userspace memory where the security state is to be copied. - * @optlen userspace int where the module should copy the actual length - * of the security state. - * @len as input is the maximum length to copy to userspace provided - * by the caller. - * Return 0 if all is well, otherwise, typical getsockopt return - * values. - * @socket_getpeersec_dgram: - * This hook allows the security module to provide peer socket security - * state for udp sockets on a per-packet basis to userspace via - * getsockopt SO_GETPEERSEC. The application must first have indicated - * the IP_PASSSEC option via getsockopt. It can then retrieve the - * security state returned by this hook for a packet via the SCM_SECURITY - * ancillary message type. - * @skb is the skbuff for the packet being queried - * @secdata is a pointer to a buffer in which to copy the security data - * @seclen is the maximum length for @secdata - * Return 0 on success, error on failure. - * @sk_alloc_security: - * Allocate and attach a security structure to the sk->sk_security field, - * which is used to copy security attributes between local stream sockets. - * @sk_free_security: - * Deallocate security structure. - * @sk_clone_security: - * Clone/copy security structure. - * @sk_getsecid: - * Retrieve the LSM-specific secid for the sock to enable caching of network - * authorizations. - * @sock_graft: - * Sets the socket's isec sid to the sock's sid. - * @inet_conn_request: - * Sets the openreq's sid to socket's sid with MLS portion taken from peer sid. - * @inet_csk_clone: - * Sets the new child socket's sid to the openreq sid. - * @inet_conn_established: - * Sets the connection's peersid to the secmark on skb. - * @secmark_relabel_packet: - * check if the process should be allowed to relabel packets to the given secid - * @security_secmark_refcount_inc - * tells the LSM to increment the number of secmark labeling rules loaded - * @security_secmark_refcount_dec - * tells the LSM to decrement the number of secmark labeling rules loaded - * @req_classify_flow: - * Sets the flow's sid to the openreq sid. - * @tun_dev_alloc_security: - * This hook allows a module to allocate a security structure for a TUN - * device. - * @security pointer to a security structure pointer. - * Returns a zero on success, negative values on failure. - * @tun_dev_free_security: - * This hook allows a module to free the security structure for a TUN - * device. - * @security pointer to the TUN device's security structure - * @tun_dev_create: - * Check permissions prior to creating a new TUN device. - * @tun_dev_attach_queue: - * Check permissions prior to attaching to a TUN device queue. - * @security pointer to the TUN device's security structure. - * @tun_dev_attach: - * This hook can be used by the module to update any security state - * associated with the TUN device's sock structure. - * @sk contains the existing sock structure. - * @security pointer to the TUN device's security structure. - * @tun_dev_open: - * This hook can be used by the module to update any security state - * associated with the TUN device's security structure. - * @security pointer to the TUN devices's security structure. - * @skb_owned_by: - * This hook sets the packet's owning sock. - * @skb is the packet. - * @sk the sock which owns the packet. - * - * Security hooks for XFRM operations. - * - * @xfrm_policy_alloc_security: - * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy - * Database used by the XFRM system. - * @sec_ctx contains the security context information being provided by - * the user-level policy update program (e.g., setkey). - * Allocate a security structure to the xp->security field; the security - * field is initialized to NULL when the xfrm_policy is allocated. - * Return 0 if operation was successful (memory to allocate, legal context) - * @gfp is to specify the context for the allocation - * @xfrm_policy_clone_security: - * @old_ctx contains an existing xfrm_sec_ctx. - * @new_ctxp contains a new xfrm_sec_ctx being cloned from old. - * Allocate a security structure in new_ctxp that contains the - * information from the old_ctx structure. - * Return 0 if operation was successful (memory to allocate). - * @xfrm_policy_free_security: - * @ctx contains the xfrm_sec_ctx - * Deallocate xp->security. - * @xfrm_policy_delete_security: - * @ctx contains the xfrm_sec_ctx. - * Authorize deletion of xp->security. - * @xfrm_state_alloc: - * @x contains the xfrm_state being added to the Security Association - * Database by the XFRM system. - * @sec_ctx contains the security context information being provided by - * the user-level SA generation program (e.g., setkey or racoon). - * Allocate a security structure to the x->security field; the security - * field is initialized to NULL when the xfrm_state is allocated. Set the - * context to correspond to sec_ctx. Return 0 if operation was successful - * (memory to allocate, legal context). - * @xfrm_state_alloc_acquire: - * @x contains the xfrm_state being added to the Security Association - * Database by the XFRM system. - * @polsec contains the policy's security context. - * @secid contains the secid from which to take the mls portion of the - * context. - * Allocate a security structure to the x->security field; the security - * field is initialized to NULL when the xfrm_state is allocated. Set the - * context to correspond to secid. Return 0 if operation was successful - * (memory to allocate, legal context). - * @xfrm_state_free_security: - * @x contains the xfrm_state. - * Deallocate x->security. - * @xfrm_state_delete_security: - * @x contains the xfrm_state. - * Authorize deletion of x->security. - * @xfrm_policy_lookup: - * @ctx contains the xfrm_sec_ctx for which the access control is being - * checked. - * @fl_secid contains the flow security label that is used to authorize - * access to the policy xp. - * @dir contains the direction of the flow (input or output). - * Check permission when a flow selects a xfrm_policy for processing - * XFRMs on a packet. The hook is called when selecting either a - * per-socket policy or a generic xfrm policy. - * Return 0 if permission is granted, -ESRCH otherwise, or -errno - * on other errors. - * @xfrm_state_pol_flow_match: - * @x contains the state to match. - * @xp contains the policy to check for a match. - * @fl contains the flow to check for a match. - * Return 1 if there is a match. - * @xfrm_decode_session: - * @skb points to skb to decode. - * @secid points to the flow key secid to set. - * @ckall says if all xfrms used should be checked for same secid. - * Return 0 if ckall is zero or all xfrms used have the same secid. - * - * Security hooks affecting all Key Management operations - * - * @key_alloc: - * Permit allocation of a key and assign security data. Note that key does - * not have a serial number assigned at this point. - * @key points to the key. - * @flags is the allocation flags - * Return 0 if permission is granted, -ve error otherwise. - * @key_free: - * Notification of destruction; free security data. - * @key points to the key. - * No return value. - * @key_permission: - * See whether a specific operational right is granted to a process on a - * key. - * @key_ref refers to the key (key pointer + possession attribute bit). - * @cred points to the credentials to provide the context against which to - * evaluate the security data on the key. - * @perm describes the combination of permissions required of this key. - * Return 0 if permission is granted, -ve error otherwise. - * @key_getsecurity: - * Get a textual representation of the security context attached to a key - * for the purposes of honouring KEYCTL_GETSECURITY. This function - * allocates the storage for the NUL-terminated string and the caller - * should free it. - * @key points to the key to be queried. - * @_buffer points to a pointer that should be set to point to the - * resulting string (if no label or an error occurs). - * Return the length of the string (including terminating NUL) or -ve if - * an error. - * May also return 0 (and a NULL buffer pointer) if there is no label. - * - * Security hooks affecting all System V IPC operations. - * - * @ipc_permission: - * Check permissions for access to IPC - * @ipcp contains the kernel IPC permission structure - * @flag contains the desired (requested) permission set - * Return 0 if permission is granted. - * @ipc_getsecid: - * Get the secid associated with the ipc object. - * @ipcp contains the kernel IPC permission structure. - * @secid contains a pointer to the location where result will be saved. - * In case of failure, @secid will be set to zero. - * - * Security hooks for individual messages held in System V IPC message queues - * @msg_msg_alloc_security: - * Allocate and attach a security structure to the msg->security field. - * The security field is initialized to NULL when the structure is first - * created. - * @msg contains the message structure to be modified. - * Return 0 if operation was successful and permission is granted. - * @msg_msg_free_security: - * Deallocate the security structure for this message. - * @msg contains the message structure to be modified. - * - * Security hooks for System V IPC Message Queues - * - * @msg_queue_alloc_security: - * Allocate and attach a security structure to the - * msq->q_perm.security field. The security field is initialized to - * NULL when the structure is first created. - * @msq contains the message queue structure to be modified. - * Return 0 if operation was successful and permission is granted. - * @msg_queue_free_security: - * Deallocate security structure for this message queue. - * @msq contains the message queue structure to be modified. - * @msg_queue_associate: - * Check permission when a message queue is requested through the - * msgget system call. This hook is only called when returning the - * message queue identifier for an existing message queue, not when a - * new message queue is created. - * @msq contains the message queue to act upon. - * @msqflg contains the operation control flags. - * Return 0 if permission is granted. - * @msg_queue_msgctl: - * Check permission when a message control operation specified by @cmd - * is to be performed on the message queue @msq. - * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO. - * @msq contains the message queue to act upon. May be NULL. - * @cmd contains the operation to be performed. - * Return 0 if permission is granted. - * @msg_queue_msgsnd: - * Check permission before a message, @msg, is enqueued on the message - * queue, @msq. - * @msq contains the message queue to send message to. - * @msg contains the message to be enqueued. - * @msqflg contains operational flags. - * Return 0 if permission is granted. - * @msg_queue_msgrcv: - * Check permission before a message, @msg, is removed from the message - * queue, @msq. The @target task structure contains a pointer to the - * process that will be receiving the message (not equal to the current - * process when inline receives are being performed). - * @msq contains the message queue to retrieve message from. - * @msg contains the message destination. - * @target contains the task structure for recipient process. - * @type contains the type of message requested. - * @mode contains the operational flags. - * Return 0 if permission is granted. - * - * Security hooks for System V Shared Memory Segments - * - * @shm_alloc_security: - * Allocate and attach a security structure to the shp->shm_perm.security - * field. The security field is initialized to NULL when the structure is - * first created. - * @shp contains the shared memory structure to be modified. - * Return 0 if operation was successful and permission is granted. - * @shm_free_security: - * Deallocate the security struct for this memory segment. - * @shp contains the shared memory structure to be modified. - * @shm_associate: - * Check permission when a shared memory region is requested through the - * shmget system call. This hook is only called when returning the shared - * memory region identifier for an existing region, not when a new shared - * memory region is created. - * @shp contains the shared memory structure to be modified. - * @shmflg contains the operation control flags. - * Return 0 if permission is granted. - * @shm_shmctl: - * Check permission when a shared memory control operation specified by - * @cmd is to be performed on the shared memory region @shp. - * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO. - * @shp contains shared memory structure to be modified. - * @cmd contains the operation to be performed. - * Return 0 if permission is granted. - * @shm_shmat: - * Check permissions prior to allowing the shmat system call to attach the - * shared memory segment @shp to the data segment of the calling process. - * The attaching address is specified by @shmaddr. - * @shp contains the shared memory structure to be modified. - * @shmaddr contains the address to attach memory region to. - * @shmflg contains the operational flags. - * Return 0 if permission is granted. - * - * Security hooks for System V Semaphores - * - * @sem_alloc_security: - * Allocate and attach a security structure to the sma->sem_perm.security - * field. The security field is initialized to NULL when the structure is - * first created. - * @sma contains the semaphore structure - * Return 0 if operation was successful and permission is granted. - * @sem_free_security: - * deallocate security struct for this semaphore - * @sma contains the semaphore structure. - * @sem_associate: - * Check permission when a semaphore is requested through the semget - * system call. This hook is only called when returning the semaphore - * identifier for an existing semaphore, not when a new one must be - * created. - * @sma contains the semaphore structure. - * @semflg contains the operation control flags. - * Return 0 if permission is granted. - * @sem_semctl: - * Check permission when a semaphore operation specified by @cmd is to be - * performed on the semaphore @sma. The @sma may be NULL, e.g. for - * IPC_INFO or SEM_INFO. - * @sma contains the semaphore structure. May be NULL. - * @cmd contains the operation to be performed. - * Return 0 if permission is granted. - * @sem_semop - * Check permissions before performing operations on members of the - * semaphore set @sma. If the @alter flag is nonzero, the semaphore set - * may be modified. - * @sma contains the semaphore structure. - * @sops contains the operations to perform. - * @nsops contains the number of operations to perform. - * @alter contains the flag indicating whether changes are to be made. - * Return 0 if permission is granted. - * - * @binder_set_context_mgr - * Check whether @mgr is allowed to be the binder context manager. - * @mgr contains the task_struct for the task being registered. - * Return 0 if permission is granted. - * @binder_transaction - * Check whether @from is allowed to invoke a binder transaction call - * to @to. - * @from contains the task_struct for the sending task. - * @to contains the task_struct for the receiving task. - * @binder_transfer_binder - * Check whether @from is allowed to transfer a binder reference to @to. - * @from contains the task_struct for the sending task. - * @to contains the task_struct for the receiving task. - * @binder_transfer_file - * Check whether @from is allowed to transfer @file to @to. - * @from contains the task_struct for the sending task. - * @file contains the struct file being transferred. - * @to contains the task_struct for the receiving task. - * - * @ptrace_access_check: - * Check permission before allowing the current process to trace the - * @child process. - * Security modules may also want to perform a process tracing check - * during an execve in the set_security or apply_creds hooks of - * tracing check during an execve in the bprm_set_creds hook of - * binprm_security_ops if the process is being traced and its security - * attributes would be changed by the execve. - * @child contains the task_struct structure for the target process. - * @mode contains the PTRACE_MODE flags indicating the form of access. - * Return 0 if permission is granted. - * @ptrace_traceme: - * Check that the @parent process has sufficient permission to trace the - * current process before allowing the current process to present itself - * to the @parent process for tracing. - * @parent contains the task_struct structure for debugger process. - * Return 0 if permission is granted. - * @capget: - * Get the @effective, @inheritable, and @permitted capability sets for - * the @target process. The hook may also perform permission checking to - * determine if the current process is allowed to see the capability sets - * of the @target process. - * @target contains the task_struct structure for target process. - * @effective contains the effective capability set. - * @inheritable contains the inheritable capability set. - * @permitted contains the permitted capability set. - * Return 0 if the capability sets were successfully obtained. - * @capset: - * Set the @effective, @inheritable, and @permitted capability sets for - * the current process. - * @new contains the new credentials structure for target process. - * @old contains the current credentials structure for target process. - * @effective contains the effective capability set. - * @inheritable contains the inheritable capability set. - * @permitted contains the permitted capability set. - * Return 0 and update @new if permission is granted. - * @capable: - * Check whether the @tsk process has the @cap capability in the indicated - * credentials. - * @cred contains the credentials to use. - * @ns contains the user namespace we want the capability in - * @cap contains the capability . - * @audit: Whether to write an audit message or not - * Return 0 if the capability is granted for @tsk. - * @syslog: - * Check permission before accessing the kernel message ring or changing - * logging to the console. - * See the syslog(2) manual page for an explanation of the @type values. - * @type contains the type of action. - * @from_file indicates the context of action (if it came from /proc). - * Return 0 if permission is granted. - * @settime: - * Check permission to change the system time. - * struct timespec and timezone are defined in include/linux/time.h - * @ts contains new time - * @tz contains new timezone - * Return 0 if permission is granted. - * @vm_enough_memory: - * Check permissions for allocating a new virtual mapping. - * @mm contains the mm struct it is being added to. - * @pages contains the number of pages. - * Return 0 if permission is granted. - * - * @ismaclabel: - * Check if the extended attribute specified by @name - * represents a MAC label. Returns 1 if name is a MAC - * attribute otherwise returns 0. - * @name full extended attribute name to check against - * LSM as a MAC label. - * - * @secid_to_secctx: - * Convert secid to security context. If secdata is NULL the length of - * the result will be returned in seclen, but no secdata will be returned. - * This does mean that the length could change between calls to check the - * length and the next call which actually allocates and returns the secdata. - * @secid contains the security ID. - * @secdata contains the pointer that stores the converted security context. - * @seclen pointer which contains the length of the data - * @secctx_to_secid: - * Convert security context to secid. - * @secid contains the pointer to the generated security ID. - * @secdata contains the security context. - * - * @release_secctx: - * Release the security context. - * @secdata contains the security context. - * @seclen contains the length of the security context. - * - * Security hooks for Audit - * - * @audit_rule_init: - * Allocate and initialize an LSM audit rule structure. - * @field contains the required Audit action. Fields flags are defined in include/linux/audit.h - * @op contains the operator the rule uses. - * @rulestr contains the context where the rule will be applied to. - * @lsmrule contains a pointer to receive the result. - * Return 0 if @lsmrule has been successfully set, - * -EINVAL in case of an invalid rule. - * - * @audit_rule_known: - * Specifies whether given @rule contains any fields related to current LSM. - * @rule contains the audit rule of interest. - * Return 1 in case of relation found, 0 otherwise. - * - * @audit_rule_match: - * Determine if given @secid matches a rule previously approved - * by @audit_rule_known. - * @secid contains the security id in question. - * @field contains the field which relates to current LSM. - * @op contains the operator that will be used for matching. - * @rule points to the audit rule that will be checked against. - * @actx points to the audit context associated with the check. - * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure. - * - * @audit_rule_free: - * Deallocate the LSM audit rule structure previously allocated by - * audit_rule_init. - * @rule contains the allocated rule - * - * @inode_notifysecctx: - * Notify the security module of what the security context of an inode - * should be. Initializes the incore security context managed by the - * security module for this inode. Example usage: NFS client invokes - * this hook to initialize the security context in its incore inode to the - * value provided by the server for the file when the server returned the - * file's attributes to the client. - * - * Must be called with inode->i_mutex locked. - * - * @inode we wish to set the security context of. - * @ctx contains the string which we wish to set in the inode. - * @ctxlen contains the length of @ctx. - * - * @inode_setsecctx: - * Change the security context of an inode. Updates the - * incore security context managed by the security module and invokes the - * fs code as needed (via __vfs_setxattr_noperm) to update any backing - * xattrs that represent the context. Example usage: NFS server invokes - * this hook to change the security context in its incore inode and on the - * backing filesystem to a value provided by the client on a SETATTR - * operation. - * - * Must be called with inode->i_mutex locked. - * - * @dentry contains the inode we wish to set the security context of. - * @ctx contains the string which we wish to set in the inode. - * @ctxlen contains the length of @ctx. - * - * @inode_getsecctx: - * On success, returns 0 and fills out @ctx and @ctxlen with the security - * context for the given @inode. - * - * @inode we wish to get the security context of. - * @ctx is a pointer in which to place the allocated security context. - * @ctxlen points to the place to put the length of @ctx. - * This is the main security structure. - */ - /* prototypes */ extern int security_init(void); -- cgit v1.2.3 From e20b043a6902ecb61c2c84355c3bae5149f391db Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Sat, 2 May 2015 15:11:36 -0700 Subject: LSM: Add security module hook list heads Add a list header for each security hook. They aren't used until later in the patch series. They are grouped together in a structure so that there doesn't need to be an external address for each. Macro-ize the initialization of the security_operations for each security module in anticipation of changing out the security_operations structure. Signed-off-by: Casey Schaufler Acked-by: John Johansen Acked-by: Kees Cook Acked-by: Paul Moore Acked-by: Stephen Smalley Acked-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/lsm_hooks.h | 220 +++++++++++++++++++++++++ security/apparmor/lsm.c | 84 +++++----- security/selinux/hooks.c | 398 +++++++++++++++++++++++---------------------- security/smack/smack_lsm.c | 258 ++++++++++++++--------------- security/tomoyo/tomoyo.c | 58 +++---- security/yama/yama_lsm.c | 10 +- 6 files changed, 626 insertions(+), 402 deletions(-) (limited to 'include') diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h index b4c91de510c2..27dd6fcacccc 100644 --- a/include/linux/lsm_hooks.h +++ b/include/linux/lsm_hooks.h @@ -1626,6 +1626,226 @@ struct security_operations { #endif /* CONFIG_AUDIT */ }; +struct security_hook_heads { + struct list_head binder_set_context_mgr; + struct list_head binder_transaction; + struct list_head binder_transfer_binder; + struct list_head binder_transfer_file; + struct list_head ptrace_access_check; + struct list_head ptrace_traceme; + struct list_head capget; + struct list_head capset; + struct list_head capable; + struct list_head quotactl; + struct list_head quota_on; + struct list_head syslog; + struct list_head settime; + struct list_head vm_enough_memory; + struct list_head bprm_set_creds; + struct list_head bprm_check_security; + struct list_head bprm_secureexec; + struct list_head bprm_committing_creds; + struct list_head bprm_committed_creds; + struct list_head sb_alloc_security; + struct list_head sb_free_security; + struct list_head sb_copy_data; + struct list_head sb_remount; + struct list_head sb_kern_mount; + struct list_head sb_show_options; + struct list_head sb_statfs; + struct list_head sb_mount; + struct list_head sb_umount; + struct list_head sb_pivotroot; + struct list_head sb_set_mnt_opts; + struct list_head sb_clone_mnt_opts; + struct list_head sb_parse_opts_str; + struct list_head dentry_init_security; +#ifdef CONFIG_SECURITY_PATH + struct list_head path_unlink; + struct list_head path_mkdir; + struct list_head path_rmdir; + struct list_head path_mknod; + struct list_head path_truncate; + struct list_head path_symlink; + struct list_head path_link; + struct list_head path_rename; + struct list_head path_chmod; + struct list_head path_chown; + struct list_head path_chroot; +#endif + struct list_head inode_alloc_security; + struct list_head inode_free_security; + struct list_head inode_init_security; + struct list_head inode_create; + struct list_head inode_link; + struct list_head inode_unlink; + struct list_head inode_symlink; + struct list_head inode_mkdir; + struct list_head inode_rmdir; + struct list_head inode_mknod; + struct list_head inode_rename; + struct list_head inode_readlink; + struct list_head inode_follow_link; + struct list_head inode_permission; + struct list_head inode_setattr; + struct list_head inode_getattr; + struct list_head inode_setxattr; + struct list_head inode_post_setxattr; + struct list_head inode_getxattr; + struct list_head inode_listxattr; + struct list_head inode_removexattr; + struct list_head inode_need_killpriv; + struct list_head inode_killpriv; + struct list_head inode_getsecurity; + struct list_head inode_setsecurity; + struct list_head inode_listsecurity; + struct list_head inode_getsecid; + struct list_head file_permission; + struct list_head file_alloc_security; + struct list_head file_free_security; + struct list_head file_ioctl; + struct list_head mmap_addr; + struct list_head mmap_file; + struct list_head file_mprotect; + struct list_head file_lock; + struct list_head file_fcntl; + struct list_head file_set_fowner; + struct list_head file_send_sigiotask; + struct list_head file_receive; + struct list_head file_open; + struct list_head task_create; + struct list_head task_free; + struct list_head cred_alloc_blank; + struct list_head cred_free; + struct list_head cred_prepare; + struct list_head cred_transfer; + struct list_head kernel_act_as; + struct list_head kernel_create_files_as; + struct list_head kernel_fw_from_file; + struct list_head kernel_module_request; + struct list_head kernel_module_from_file; + struct list_head task_fix_setuid; + struct list_head task_setpgid; + struct list_head task_getpgid; + struct list_head task_getsid; + struct list_head task_getsecid; + struct list_head task_setnice; + struct list_head task_setioprio; + struct list_head task_getioprio; + struct list_head task_setrlimit; + struct list_head task_setscheduler; + struct list_head task_getscheduler; + struct list_head task_movememory; + struct list_head task_kill; + struct list_head task_wait; + struct list_head task_prctl; + struct list_head task_to_inode; + struct list_head ipc_permission; + struct list_head ipc_getsecid; + struct list_head msg_msg_alloc_security; + struct list_head msg_msg_free_security; + struct list_head msg_queue_alloc_security; + struct list_head msg_queue_free_security; + struct list_head msg_queue_associate; + struct list_head msg_queue_msgctl; + struct list_head msg_queue_msgsnd; + struct list_head msg_queue_msgrcv; + struct list_head shm_alloc_security; + struct list_head shm_free_security; + struct list_head shm_associate; + struct list_head shm_shmctl; + struct list_head shm_shmat; + struct list_head sem_alloc_security; + struct list_head sem_free_security; + struct list_head sem_associate; + struct list_head sem_semctl; + struct list_head sem_semop; + struct list_head netlink_send; + struct list_head d_instantiate; + struct list_head getprocattr; + struct list_head setprocattr; + struct list_head ismaclabel; + struct list_head secid_to_secctx; + struct list_head secctx_to_secid; + struct list_head release_secctx; + struct list_head inode_notifysecctx; + struct list_head inode_setsecctx; + struct list_head inode_getsecctx; +#ifdef CONFIG_SECURITY_NETWORK + struct list_head unix_stream_connect; + struct list_head unix_may_send; + struct list_head socket_create; + struct list_head socket_post_create; + struct list_head socket_bind; + struct list_head socket_connect; + struct list_head socket_listen; + struct list_head socket_accept; + struct list_head socket_sendmsg; + struct list_head socket_recvmsg; + struct list_head socket_getsockname; + struct list_head socket_getpeername; + struct list_head socket_getsockopt; + struct list_head socket_setsockopt; + struct list_head socket_shutdown; + struct list_head socket_sock_rcv_skb; + struct list_head socket_getpeersec_stream; + struct list_head socket_getpeersec_dgram; + struct list_head sk_alloc_security; + struct list_head sk_free_security; + struct list_head sk_clone_security; + struct list_head sk_getsecid; + struct list_head sock_graft; + struct list_head inet_conn_request; + struct list_head inet_csk_clone; + struct list_head inet_conn_established; + struct list_head secmark_relabel_packet; + struct list_head secmark_refcount_inc; + struct list_head secmark_refcount_dec; + struct list_head req_classify_flow; + struct list_head tun_dev_alloc_security; + struct list_head tun_dev_free_security; + struct list_head tun_dev_create; + struct list_head tun_dev_attach_queue; + struct list_head tun_dev_attach; + struct list_head tun_dev_open; + struct list_head skb_owned_by; +#endif /* CONFIG_SECURITY_NETWORK */ +#ifdef CONFIG_SECURITY_NETWORK_XFRM + struct list_head xfrm_policy_alloc_security; + struct list_head xfrm_policy_clone_security; + struct list_head xfrm_policy_free_security; + struct list_head xfrm_policy_delete_security; + struct list_head xfrm_state_alloc; + struct list_head xfrm_state_alloc_acquire; + struct list_head xfrm_state_free_security; + struct list_head xfrm_state_delete_security; + struct list_head xfrm_policy_lookup; + struct list_head xfrm_state_pol_flow_match; + struct list_head xfrm_decode_session; +#endif /* CONFIG_SECURITY_NETWORK_XFRM */ +#ifdef CONFIG_KEYS + struct list_head key_alloc; + struct list_head key_free; + struct list_head key_permission; + struct list_head key_getsecurity; +#endif /* CONFIG_KEYS */ +#ifdef CONFIG_AUDIT + struct list_head audit_rule_init; + struct list_head audit_rule_known; + struct list_head audit_rule_match; + struct list_head audit_rule_free; +#endif /* CONFIG_AUDIT */ +}; + +/* + * Initializing a security_hook_list structure takes + * up a lot of space in a source file. This macro takes + * care of the common case and reduces the amount of + * text involved. + * Casey says: Comment is true in the next patch. + */ +#define LSM_HOOK_INIT(HEAD, HOOK) .HEAD = HOOK + /* prototypes */ extern int security_module_enable(struct security_operations *ops); extern int register_security(struct security_operations *ops); diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index fead41bd0440..f54253258fb8 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -616,48 +616,48 @@ static int apparmor_task_setrlimit(struct task_struct *task, } static struct security_operations apparmor_ops = { - .name = "apparmor", - - .ptrace_access_check = apparmor_ptrace_access_check, - .ptrace_traceme = apparmor_ptrace_traceme, - .capget = apparmor_capget, - .capable = apparmor_capable, - - .path_link = apparmor_path_link, - .path_unlink = apparmor_path_unlink, - .path_symlink = apparmor_path_symlink, - .path_mkdir = apparmor_path_mkdir, - .path_rmdir = apparmor_path_rmdir, - .path_mknod = apparmor_path_mknod, - .path_rename = apparmor_path_rename, - .path_chmod = apparmor_path_chmod, - .path_chown = apparmor_path_chown, - .path_truncate = apparmor_path_truncate, - .inode_getattr = apparmor_inode_getattr, - - .file_open = apparmor_file_open, - .file_permission = apparmor_file_permission, - .file_alloc_security = apparmor_file_alloc_security, - .file_free_security = apparmor_file_free_security, - .mmap_file = apparmor_mmap_file, - .mmap_addr = cap_mmap_addr, - .file_mprotect = apparmor_file_mprotect, - .file_lock = apparmor_file_lock, - - .getprocattr = apparmor_getprocattr, - .setprocattr = apparmor_setprocattr, - - .cred_alloc_blank = apparmor_cred_alloc_blank, - .cred_free = apparmor_cred_free, - .cred_prepare = apparmor_cred_prepare, - .cred_transfer = apparmor_cred_transfer, - - .bprm_set_creds = apparmor_bprm_set_creds, - .bprm_committing_creds = apparmor_bprm_committing_creds, - .bprm_committed_creds = apparmor_bprm_committed_creds, - .bprm_secureexec = apparmor_bprm_secureexec, - - .task_setrlimit = apparmor_task_setrlimit, + LSM_HOOK_INIT(name, "apparmor"), + + LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check), + LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme), + LSM_HOOK_INIT(capget, apparmor_capget), + LSM_HOOK_INIT(capable, apparmor_capable), + + LSM_HOOK_INIT(path_link, apparmor_path_link), + LSM_HOOK_INIT(path_unlink, apparmor_path_unlink), + LSM_HOOK_INIT(path_symlink, apparmor_path_symlink), + LSM_HOOK_INIT(path_mkdir, apparmor_path_mkdir), + LSM_HOOK_INIT(path_rmdir, apparmor_path_rmdir), + LSM_HOOK_INIT(path_mknod, apparmor_path_mknod), + LSM_HOOK_INIT(path_rename, apparmor_path_rename), + LSM_HOOK_INIT(path_chmod, apparmor_path_chmod), + LSM_HOOK_INIT(path_chown, apparmor_path_chown), + LSM_HOOK_INIT(path_truncate, apparmor_path_truncate), + LSM_HOOK_INIT(inode_getattr, apparmor_inode_getattr), + + LSM_HOOK_INIT(file_open, apparmor_file_open), + LSM_HOOK_INIT(file_permission, apparmor_file_permission), + LSM_HOOK_INIT(file_alloc_security, apparmor_file_alloc_security), + LSM_HOOK_INIT(file_free_security, apparmor_file_free_security), + LSM_HOOK_INIT(mmap_file, apparmor_mmap_file), + LSM_HOOK_INIT(mmap_addr, cap_mmap_addr), + LSM_HOOK_INIT(file_mprotect, apparmor_file_mprotect), + LSM_HOOK_INIT(file_lock, apparmor_file_lock), + + LSM_HOOK_INIT(getprocattr, apparmor_getprocattr), + LSM_HOOK_INIT(setprocattr, apparmor_setprocattr), + + LSM_HOOK_INIT(cred_alloc_blank, apparmor_cred_alloc_blank), + LSM_HOOK_INIT(cred_free, apparmor_cred_free), + LSM_HOOK_INIT(cred_prepare, apparmor_cred_prepare), + LSM_HOOK_INIT(cred_transfer, apparmor_cred_transfer), + + LSM_HOOK_INIT(bprm_set_creds, apparmor_bprm_set_creds), + LSM_HOOK_INIT(bprm_committing_creds, apparmor_bprm_committing_creds), + LSM_HOOK_INIT(bprm_committed_creds, apparmor_bprm_committed_creds), + LSM_HOOK_INIT(bprm_secureexec, apparmor_bprm_secureexec), + + LSM_HOOK_INIT(task_setrlimit, apparmor_task_setrlimit), }; /* diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 40e3f7757ec7..0cf105f346d4 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -5841,211 +5841,215 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer) #endif static struct security_operations selinux_ops = { - .name = "selinux", - - .binder_set_context_mgr = selinux_binder_set_context_mgr, - .binder_transaction = selinux_binder_transaction, - .binder_transfer_binder = selinux_binder_transfer_binder, - .binder_transfer_file = selinux_binder_transfer_file, - - .ptrace_access_check = selinux_ptrace_access_check, - .ptrace_traceme = selinux_ptrace_traceme, - .capget = selinux_capget, - .capset = selinux_capset, - .capable = selinux_capable, - .quotactl = selinux_quotactl, - .quota_on = selinux_quota_on, - .syslog = selinux_syslog, - .vm_enough_memory = selinux_vm_enough_memory, - - .netlink_send = selinux_netlink_send, - - .bprm_set_creds = selinux_bprm_set_creds, - .bprm_committing_creds = selinux_bprm_committing_creds, - .bprm_committed_creds = selinux_bprm_committed_creds, - .bprm_secureexec = selinux_bprm_secureexec, - - .sb_alloc_security = selinux_sb_alloc_security, - .sb_free_security = selinux_sb_free_security, - .sb_copy_data = selinux_sb_copy_data, - .sb_remount = selinux_sb_remount, - .sb_kern_mount = selinux_sb_kern_mount, - .sb_show_options = selinux_sb_show_options, - .sb_statfs = selinux_sb_statfs, - .sb_mount = selinux_mount, - .sb_umount = selinux_umount, - .sb_set_mnt_opts = selinux_set_mnt_opts, - .sb_clone_mnt_opts = selinux_sb_clone_mnt_opts, - .sb_parse_opts_str = selinux_parse_opts_str, - - .dentry_init_security = selinux_dentry_init_security, - - .inode_alloc_security = selinux_inode_alloc_security, - .inode_free_security = selinux_inode_free_security, - .inode_init_security = selinux_inode_init_security, - .inode_create = selinux_inode_create, - .inode_link = selinux_inode_link, - .inode_unlink = selinux_inode_unlink, - .inode_symlink = selinux_inode_symlink, - .inode_mkdir = selinux_inode_mkdir, - .inode_rmdir = selinux_inode_rmdir, - .inode_mknod = selinux_inode_mknod, - .inode_rename = selinux_inode_rename, - .inode_readlink = selinux_inode_readlink, - .inode_follow_link = selinux_inode_follow_link, - .inode_permission = selinux_inode_permission, - .inode_setattr = selinux_inode_setattr, - .inode_getattr = selinux_inode_getattr, - .inode_setxattr = selinux_inode_setxattr, - .inode_post_setxattr = selinux_inode_post_setxattr, - .inode_getxattr = selinux_inode_getxattr, - .inode_listxattr = selinux_inode_listxattr, - .inode_removexattr = selinux_inode_removexattr, - .inode_getsecurity = selinux_inode_getsecurity, - .inode_setsecurity = selinux_inode_setsecurity, - .inode_listsecurity = selinux_inode_listsecurity, - .inode_getsecid = selinux_inode_getsecid, - - .file_permission = selinux_file_permission, - .file_alloc_security = selinux_file_alloc_security, - .file_free_security = selinux_file_free_security, - .file_ioctl = selinux_file_ioctl, - .mmap_file = selinux_mmap_file, - .mmap_addr = selinux_mmap_addr, - .file_mprotect = selinux_file_mprotect, - .file_lock = selinux_file_lock, - .file_fcntl = selinux_file_fcntl, - .file_set_fowner = selinux_file_set_fowner, - .file_send_sigiotask = selinux_file_send_sigiotask, - .file_receive = selinux_file_receive, - - .file_open = selinux_file_open, - - .task_create = selinux_task_create, - .cred_alloc_blank = selinux_cred_alloc_blank, - .cred_free = selinux_cred_free, - .cred_prepare = selinux_cred_prepare, - .cred_transfer = selinux_cred_transfer, - .kernel_act_as = selinux_kernel_act_as, - .kernel_create_files_as = selinux_kernel_create_files_as, - .kernel_module_request = selinux_kernel_module_request, - .task_setpgid = selinux_task_setpgid, - .task_getpgid = selinux_task_getpgid, - .task_getsid = selinux_task_getsid, - .task_getsecid = selinux_task_getsecid, - .task_setnice = selinux_task_setnice, - .task_setioprio = selinux_task_setioprio, - .task_getioprio = selinux_task_getioprio, - .task_setrlimit = selinux_task_setrlimit, - .task_setscheduler = selinux_task_setscheduler, - .task_getscheduler = selinux_task_getscheduler, - .task_movememory = selinux_task_movememory, - .task_kill = selinux_task_kill, - .task_wait = selinux_task_wait, - .task_to_inode = selinux_task_to_inode, - - .ipc_permission = selinux_ipc_permission, - .ipc_getsecid = selinux_ipc_getsecid, - - .msg_msg_alloc_security = selinux_msg_msg_alloc_security, - .msg_msg_free_security = selinux_msg_msg_free_security, - - .msg_queue_alloc_security = selinux_msg_queue_alloc_security, - .msg_queue_free_security = selinux_msg_queue_free_security, - .msg_queue_associate = selinux_msg_queue_associate, - .msg_queue_msgctl = selinux_msg_queue_msgctl, - .msg_queue_msgsnd = selinux_msg_queue_msgsnd, - .msg_queue_msgrcv = selinux_msg_queue_msgrcv, - - .shm_alloc_security = selinux_shm_alloc_security, - .shm_free_security = selinux_shm_free_security, - .shm_associate = selinux_shm_associate, - .shm_shmctl = selinux_shm_shmctl, - .shm_shmat = selinux_shm_shmat, - - .sem_alloc_security = selinux_sem_alloc_security, - .sem_free_security = selinux_sem_free_security, - .sem_associate = selinux_sem_associate, - .sem_semctl = selinux_sem_semctl, - .sem_semop = selinux_sem_semop, - - .d_instantiate = selinux_d_instantiate, - - .getprocattr = selinux_getprocattr, - .setprocattr = selinux_setprocattr, - - .ismaclabel = selinux_ismaclabel, - .secid_to_secctx = selinux_secid_to_secctx, - .secctx_to_secid = selinux_secctx_to_secid, - .release_secctx = selinux_release_secctx, - .inode_notifysecctx = selinux_inode_notifysecctx, - .inode_setsecctx = selinux_inode_setsecctx, - .inode_getsecctx = selinux_inode_getsecctx, - - .unix_stream_connect = selinux_socket_unix_stream_connect, - .unix_may_send = selinux_socket_unix_may_send, - - .socket_create = selinux_socket_create, - .socket_post_create = selinux_socket_post_create, - .socket_bind = selinux_socket_bind, - .socket_connect = selinux_socket_connect, - .socket_listen = selinux_socket_listen, - .socket_accept = selinux_socket_accept, - .socket_sendmsg = selinux_socket_sendmsg, - .socket_recvmsg = selinux_socket_recvmsg, - .socket_getsockname = selinux_socket_getsockname, - .socket_getpeername = selinux_socket_getpeername, - .socket_getsockopt = selinux_socket_getsockopt, - .socket_setsockopt = selinux_socket_setsockopt, - .socket_shutdown = selinux_socket_shutdown, - .socket_sock_rcv_skb = selinux_socket_sock_rcv_skb, - .socket_getpeersec_stream = selinux_socket_getpeersec_stream, - .socket_getpeersec_dgram = selinux_socket_getpeersec_dgram, - .sk_alloc_security = selinux_sk_alloc_security, - .sk_free_security = selinux_sk_free_security, - .sk_clone_security = selinux_sk_clone_security, - .sk_getsecid = selinux_sk_getsecid, - .sock_graft = selinux_sock_graft, - .inet_conn_request = selinux_inet_conn_request, - .inet_csk_clone = selinux_inet_csk_clone, - .inet_conn_established = selinux_inet_conn_established, - .secmark_relabel_packet = selinux_secmark_relabel_packet, - .secmark_refcount_inc = selinux_secmark_refcount_inc, - .secmark_refcount_dec = selinux_secmark_refcount_dec, - .req_classify_flow = selinux_req_classify_flow, - .tun_dev_alloc_security = selinux_tun_dev_alloc_security, - .tun_dev_free_security = selinux_tun_dev_free_security, - .tun_dev_create = selinux_tun_dev_create, - .tun_dev_attach_queue = selinux_tun_dev_attach_queue, - .tun_dev_attach = selinux_tun_dev_attach, - .tun_dev_open = selinux_tun_dev_open, + LSM_HOOK_INIT(name, "selinux"), + + LSM_HOOK_INIT(binder_set_context_mgr, selinux_binder_set_context_mgr), + LSM_HOOK_INIT(binder_transaction, selinux_binder_transaction), + LSM_HOOK_INIT(binder_transfer_binder, selinux_binder_transfer_binder), + LSM_HOOK_INIT(binder_transfer_file, selinux_binder_transfer_file), + + LSM_HOOK_INIT(ptrace_access_check, selinux_ptrace_access_check), + LSM_HOOK_INIT(ptrace_traceme, selinux_ptrace_traceme), + LSM_HOOK_INIT(capget, selinux_capget), + LSM_HOOK_INIT(capset, selinux_capset), + LSM_HOOK_INIT(capable, selinux_capable), + LSM_HOOK_INIT(quotactl, selinux_quotactl), + LSM_HOOK_INIT(quota_on, selinux_quota_on), + LSM_HOOK_INIT(syslog, selinux_syslog), + LSM_HOOK_INIT(vm_enough_memory, selinux_vm_enough_memory), + + LSM_HOOK_INIT(netlink_send, selinux_netlink_send), + + LSM_HOOK_INIT(bprm_set_creds, selinux_bprm_set_creds), + LSM_HOOK_INIT(bprm_committing_creds, selinux_bprm_committing_creds), + LSM_HOOK_INIT(bprm_committed_creds, selinux_bprm_committed_creds), + LSM_HOOK_INIT(bprm_secureexec, selinux_bprm_secureexec), + + LSM_HOOK_INIT(sb_alloc_security, selinux_sb_alloc_security), + LSM_HOOK_INIT(sb_free_security, selinux_sb_free_security), + LSM_HOOK_INIT(sb_copy_data, selinux_sb_copy_data), + LSM_HOOK_INIT(sb_remount, selinux_sb_remount), + LSM_HOOK_INIT(sb_kern_mount, selinux_sb_kern_mount), + LSM_HOOK_INIT(sb_show_options, selinux_sb_show_options), + LSM_HOOK_INIT(sb_statfs, selinux_sb_statfs), + LSM_HOOK_INIT(sb_mount, selinux_mount), + LSM_HOOK_INIT(sb_umount, selinux_umount), + LSM_HOOK_INIT(sb_set_mnt_opts, selinux_set_mnt_opts), + LSM_HOOK_INIT(sb_clone_mnt_opts, selinux_sb_clone_mnt_opts), + LSM_HOOK_INIT(sb_parse_opts_str, selinux_parse_opts_str), + + LSM_HOOK_INIT(dentry_init_security, selinux_dentry_init_security), + + LSM_HOOK_INIT(inode_alloc_security, selinux_inode_alloc_security), + LSM_HOOK_INIT(inode_free_security, selinux_inode_free_security), + LSM_HOOK_INIT(inode_init_security, selinux_inode_init_security), + LSM_HOOK_INIT(inode_create, selinux_inode_create), + LSM_HOOK_INIT(inode_link, selinux_inode_link), + LSM_HOOK_INIT(inode_unlink, selinux_inode_unlink), + LSM_HOOK_INIT(inode_symlink, selinux_inode_symlink), + LSM_HOOK_INIT(inode_mkdir, selinux_inode_mkdir), + LSM_HOOK_INIT(inode_rmdir, selinux_inode_rmdir), + LSM_HOOK_INIT(inode_mknod, selinux_inode_mknod), + LSM_HOOK_INIT(inode_rename, selinux_inode_rename), + LSM_HOOK_INIT(inode_readlink, selinux_inode_readlink), + LSM_HOOK_INIT(inode_follow_link, selinux_inode_follow_link), + LSM_HOOK_INIT(inode_permission, selinux_inode_permission), + LSM_HOOK_INIT(inode_setattr, selinux_inode_setattr), + LSM_HOOK_INIT(inode_getattr, selinux_inode_getattr), + LSM_HOOK_INIT(inode_setxattr, selinux_inode_setxattr), + LSM_HOOK_INIT(inode_post_setxattr, selinux_inode_post_setxattr), + LSM_HOOK_INIT(inode_getxattr, selinux_inode_getxattr), + LSM_HOOK_INIT(inode_listxattr, selinux_inode_listxattr), + LSM_HOOK_INIT(inode_removexattr, selinux_inode_removexattr), + LSM_HOOK_INIT(inode_getsecurity, selinux_inode_getsecurity), + LSM_HOOK_INIT(inode_setsecurity, selinux_inode_setsecurity), + LSM_HOOK_INIT(inode_listsecurity, selinux_inode_listsecurity), + LSM_HOOK_INIT(inode_getsecid, selinux_inode_getsecid), + + LSM_HOOK_INIT(file_permission, selinux_file_permission), + LSM_HOOK_INIT(file_alloc_security, selinux_file_alloc_security), + LSM_HOOK_INIT(file_free_security, selinux_file_free_security), + LSM_HOOK_INIT(file_ioctl, selinux_file_ioctl), + LSM_HOOK_INIT(mmap_file, selinux_mmap_file), + LSM_HOOK_INIT(mmap_addr, selinux_mmap_addr), + LSM_HOOK_INIT(file_mprotect, selinux_file_mprotect), + LSM_HOOK_INIT(file_lock, selinux_file_lock), + LSM_HOOK_INIT(file_fcntl, selinux_file_fcntl), + LSM_HOOK_INIT(file_set_fowner, selinux_file_set_fowner), + LSM_HOOK_INIT(file_send_sigiotask, selinux_file_send_sigiotask), + LSM_HOOK_INIT(file_receive, selinux_file_receive), + + LSM_HOOK_INIT(file_open, selinux_file_open), + + LSM_HOOK_INIT(task_create, selinux_task_create), + LSM_HOOK_INIT(cred_alloc_blank, selinux_cred_alloc_blank), + LSM_HOOK_INIT(cred_free, selinux_cred_free), + LSM_HOOK_INIT(cred_prepare, selinux_cred_prepare), + LSM_HOOK_INIT(cred_transfer, selinux_cred_transfer), + LSM_HOOK_INIT(kernel_act_as, selinux_kernel_act_as), + LSM_HOOK_INIT(kernel_create_files_as, selinux_kernel_create_files_as), + LSM_HOOK_INIT(kernel_module_request, selinux_kernel_module_request), + LSM_HOOK_INIT(task_setpgid, selinux_task_setpgid), + LSM_HOOK_INIT(task_getpgid, selinux_task_getpgid), + LSM_HOOK_INIT(task_getsid, selinux_task_getsid), + LSM_HOOK_INIT(task_getsecid, selinux_task_getsecid), + LSM_HOOK_INIT(task_setnice, selinux_task_setnice), + LSM_HOOK_INIT(task_setioprio, selinux_task_setioprio), + LSM_HOOK_INIT(task_getioprio, selinux_task_getioprio), + LSM_HOOK_INIT(task_setrlimit, selinux_task_setrlimit), + LSM_HOOK_INIT(task_setscheduler, selinux_task_setscheduler), + LSM_HOOK_INIT(task_getscheduler, selinux_task_getscheduler), + LSM_HOOK_INIT(task_movememory, selinux_task_movememory), + LSM_HOOK_INIT(task_kill, selinux_task_kill), + LSM_HOOK_INIT(task_wait, selinux_task_wait), + LSM_HOOK_INIT(task_to_inode, selinux_task_to_inode), + + LSM_HOOK_INIT(ipc_permission, selinux_ipc_permission), + LSM_HOOK_INIT(ipc_getsecid, selinux_ipc_getsecid), + + LSM_HOOK_INIT(msg_msg_alloc_security, selinux_msg_msg_alloc_security), + LSM_HOOK_INIT(msg_msg_free_security, selinux_msg_msg_free_security), + + LSM_HOOK_INIT(msg_queue_alloc_security, + selinux_msg_queue_alloc_security), + LSM_HOOK_INIT(msg_queue_free_security, selinux_msg_queue_free_security), + LSM_HOOK_INIT(msg_queue_associate, selinux_msg_queue_associate), + LSM_HOOK_INIT(msg_queue_msgctl, selinux_msg_queue_msgctl), + LSM_HOOK_INIT(msg_queue_msgsnd, selinux_msg_queue_msgsnd), + LSM_HOOK_INIT(msg_queue_msgrcv, selinux_msg_queue_msgrcv), + + LSM_HOOK_INIT(shm_alloc_security, selinux_shm_alloc_security), + LSM_HOOK_INIT(shm_free_security, selinux_shm_free_security), + LSM_HOOK_INIT(shm_associate, selinux_shm_associate), + LSM_HOOK_INIT(shm_shmctl, selinux_shm_shmctl), + LSM_HOOK_INIT(shm_shmat, selinux_shm_shmat), + + LSM_HOOK_INIT(sem_alloc_security, selinux_sem_alloc_security), + LSM_HOOK_INIT(sem_free_security, selinux_sem_free_security), + LSM_HOOK_INIT(sem_associate, selinux_sem_associate), + LSM_HOOK_INIT(sem_semctl, selinux_sem_semctl), + LSM_HOOK_INIT(sem_semop, selinux_sem_semop), + + LSM_HOOK_INIT(d_instantiate, selinux_d_instantiate), + + LSM_HOOK_INIT(getprocattr, selinux_getprocattr), + LSM_HOOK_INIT(setprocattr, selinux_setprocattr), + + LSM_HOOK_INIT(ismaclabel, selinux_ismaclabel), + LSM_HOOK_INIT(secid_to_secctx, selinux_secid_to_secctx), + LSM_HOOK_INIT(secctx_to_secid, selinux_secctx_to_secid), + LSM_HOOK_INIT(release_secctx, selinux_release_secctx), + LSM_HOOK_INIT(inode_notifysecctx, selinux_inode_notifysecctx), + LSM_HOOK_INIT(inode_setsecctx, selinux_inode_setsecctx), + LSM_HOOK_INIT(inode_getsecctx, selinux_inode_getsecctx), + + LSM_HOOK_INIT(unix_stream_connect, selinux_socket_unix_stream_connect), + LSM_HOOK_INIT(unix_may_send, selinux_socket_unix_may_send), + + LSM_HOOK_INIT(socket_create, selinux_socket_create), + LSM_HOOK_INIT(socket_post_create, selinux_socket_post_create), + LSM_HOOK_INIT(socket_bind, selinux_socket_bind), + LSM_HOOK_INIT(socket_connect, selinux_socket_connect), + LSM_HOOK_INIT(socket_listen, selinux_socket_listen), + LSM_HOOK_INIT(socket_accept, selinux_socket_accept), + LSM_HOOK_INIT(socket_sendmsg, selinux_socket_sendmsg), + LSM_HOOK_INIT(socket_recvmsg, selinux_socket_recvmsg), + LSM_HOOK_INIT(socket_getsockname, selinux_socket_getsockname), + LSM_HOOK_INIT(socket_getpeername, selinux_socket_getpeername), + LSM_HOOK_INIT(socket_getsockopt, selinux_socket_getsockopt), + LSM_HOOK_INIT(socket_setsockopt, selinux_socket_setsockopt), + LSM_HOOK_INIT(socket_shutdown, selinux_socket_shutdown), + LSM_HOOK_INIT(socket_sock_rcv_skb, selinux_socket_sock_rcv_skb), + LSM_HOOK_INIT(socket_getpeersec_stream, + selinux_socket_getpeersec_stream), + LSM_HOOK_INIT(socket_getpeersec_dgram, selinux_socket_getpeersec_dgram), + LSM_HOOK_INIT(sk_alloc_security, selinux_sk_alloc_security), + LSM_HOOK_INIT(sk_free_security, selinux_sk_free_security), + LSM_HOOK_INIT(sk_clone_security, selinux_sk_clone_security), + LSM_HOOK_INIT(sk_getsecid, selinux_sk_getsecid), + LSM_HOOK_INIT(sock_graft, selinux_sock_graft), + LSM_HOOK_INIT(inet_conn_request, selinux_inet_conn_request), + LSM_HOOK_INIT(inet_csk_clone, selinux_inet_csk_clone), + LSM_HOOK_INIT(inet_conn_established, selinux_inet_conn_established), + LSM_HOOK_INIT(secmark_relabel_packet, selinux_secmark_relabel_packet), + LSM_HOOK_INIT(secmark_refcount_inc, selinux_secmark_refcount_inc), + LSM_HOOK_INIT(secmark_refcount_dec, selinux_secmark_refcount_dec), + LSM_HOOK_INIT(req_classify_flow, selinux_req_classify_flow), + LSM_HOOK_INIT(tun_dev_alloc_security, selinux_tun_dev_alloc_security), + LSM_HOOK_INIT(tun_dev_free_security, selinux_tun_dev_free_security), + LSM_HOOK_INIT(tun_dev_create, selinux_tun_dev_create), + LSM_HOOK_INIT(tun_dev_attach_queue, selinux_tun_dev_attach_queue), + LSM_HOOK_INIT(tun_dev_attach, selinux_tun_dev_attach), + LSM_HOOK_INIT(tun_dev_open, selinux_tun_dev_open), #ifdef CONFIG_SECURITY_NETWORK_XFRM - .xfrm_policy_alloc_security = selinux_xfrm_policy_alloc, - .xfrm_policy_clone_security = selinux_xfrm_policy_clone, - .xfrm_policy_free_security = selinux_xfrm_policy_free, - .xfrm_policy_delete_security = selinux_xfrm_policy_delete, - .xfrm_state_alloc = selinux_xfrm_state_alloc, - .xfrm_state_alloc_acquire = selinux_xfrm_state_alloc_acquire, - .xfrm_state_free_security = selinux_xfrm_state_free, - .xfrm_state_delete_security = selinux_xfrm_state_delete, - .xfrm_policy_lookup = selinux_xfrm_policy_lookup, - .xfrm_state_pol_flow_match = selinux_xfrm_state_pol_flow_match, - .xfrm_decode_session = selinux_xfrm_decode_session, + LSM_HOOK_INIT(xfrm_policy_alloc_security, selinux_xfrm_policy_alloc), + LSM_HOOK_INIT(xfrm_policy_clone_security, selinux_xfrm_policy_clone), + LSM_HOOK_INIT(xfrm_policy_free_security, selinux_xfrm_policy_free), + LSM_HOOK_INIT(xfrm_policy_delete_security, selinux_xfrm_policy_delete), + LSM_HOOK_INIT(xfrm_state_alloc, selinux_xfrm_state_alloc), + LSM_HOOK_INIT(xfrm_state_alloc_acquire, + selinux_xfrm_state_alloc_acquire), + LSM_HOOK_INIT(xfrm_state_free_security, selinux_xfrm_state_free), + LSM_HOOK_INIT(xfrm_state_delete_security, selinux_xfrm_state_delete), + LSM_HOOK_INIT(xfrm_policy_lookup, selinux_xfrm_policy_lookup), + LSM_HOOK_INIT(xfrm_state_pol_flow_match, + selinux_xfrm_state_pol_flow_match), + LSM_HOOK_INIT(xfrm_decode_session, selinux_xfrm_decode_session), #endif #ifdef CONFIG_KEYS - .key_alloc = selinux_key_alloc, - .key_free = selinux_key_free, - .key_permission = selinux_key_permission, - .key_getsecurity = selinux_key_getsecurity, + LSM_HOOK_INIT(key_alloc, selinux_key_alloc), + LSM_HOOK_INIT(key_free, selinux_key_free), + LSM_HOOK_INIT(key_permission, selinux_key_permission), + LSM_HOOK_INIT(key_getsecurity, selinux_key_getsecurity), #endif #ifdef CONFIG_AUDIT - .audit_rule_init = selinux_audit_rule_init, - .audit_rule_known = selinux_audit_rule_known, - .audit_rule_match = selinux_audit_rule_match, - .audit_rule_free = selinux_audit_rule_free, + LSM_HOOK_INIT(audit_rule_init, selinux_audit_rule_init), + LSM_HOOK_INIT(audit_rule_known, selinux_audit_rule_known), + LSM_HOOK_INIT(audit_rule_match, selinux_audit_rule_match), + LSM_HOOK_INIT(audit_rule_free, selinux_audit_rule_free), #endif }; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index b644757886bc..4313bf44c3f0 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -4267,146 +4267,146 @@ static int smack_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen) } struct security_operations smack_ops = { - .name = "smack", - - .ptrace_access_check = smack_ptrace_access_check, - .ptrace_traceme = smack_ptrace_traceme, - .syslog = smack_syslog, - - .sb_alloc_security = smack_sb_alloc_security, - .sb_free_security = smack_sb_free_security, - .sb_copy_data = smack_sb_copy_data, - .sb_kern_mount = smack_sb_kern_mount, - .sb_statfs = smack_sb_statfs, - - .bprm_set_creds = smack_bprm_set_creds, - .bprm_committing_creds = smack_bprm_committing_creds, - .bprm_secureexec = smack_bprm_secureexec, - - .inode_alloc_security = smack_inode_alloc_security, - .inode_free_security = smack_inode_free_security, - .inode_init_security = smack_inode_init_security, - .inode_link = smack_inode_link, - .inode_unlink = smack_inode_unlink, - .inode_rmdir = smack_inode_rmdir, - .inode_rename = smack_inode_rename, - .inode_permission = smack_inode_permission, - .inode_setattr = smack_inode_setattr, - .inode_getattr = smack_inode_getattr, - .inode_setxattr = smack_inode_setxattr, - .inode_post_setxattr = smack_inode_post_setxattr, - .inode_getxattr = smack_inode_getxattr, - .inode_removexattr = smack_inode_removexattr, - .inode_getsecurity = smack_inode_getsecurity, - .inode_setsecurity = smack_inode_setsecurity, - .inode_listsecurity = smack_inode_listsecurity, - .inode_getsecid = smack_inode_getsecid, - - .file_permission = smack_file_permission, - .file_alloc_security = smack_file_alloc_security, - .file_free_security = smack_file_free_security, - .file_ioctl = smack_file_ioctl, - .file_lock = smack_file_lock, - .file_fcntl = smack_file_fcntl, - .mmap_file = smack_mmap_file, - .mmap_addr = cap_mmap_addr, - .file_set_fowner = smack_file_set_fowner, - .file_send_sigiotask = smack_file_send_sigiotask, - .file_receive = smack_file_receive, - - .file_open = smack_file_open, - - .cred_alloc_blank = smack_cred_alloc_blank, - .cred_free = smack_cred_free, - .cred_prepare = smack_cred_prepare, - .cred_transfer = smack_cred_transfer, - .kernel_act_as = smack_kernel_act_as, - .kernel_create_files_as = smack_kernel_create_files_as, - .task_setpgid = smack_task_setpgid, - .task_getpgid = smack_task_getpgid, - .task_getsid = smack_task_getsid, - .task_getsecid = smack_task_getsecid, - .task_setnice = smack_task_setnice, - .task_setioprio = smack_task_setioprio, - .task_getioprio = smack_task_getioprio, - .task_setscheduler = smack_task_setscheduler, - .task_getscheduler = smack_task_getscheduler, - .task_movememory = smack_task_movememory, - .task_kill = smack_task_kill, - .task_wait = smack_task_wait, - .task_to_inode = smack_task_to_inode, - - .ipc_permission = smack_ipc_permission, - .ipc_getsecid = smack_ipc_getsecid, - - .msg_msg_alloc_security = smack_msg_msg_alloc_security, - .msg_msg_free_security = smack_msg_msg_free_security, - - .msg_queue_alloc_security = smack_msg_queue_alloc_security, - .msg_queue_free_security = smack_msg_queue_free_security, - .msg_queue_associate = smack_msg_queue_associate, - .msg_queue_msgctl = smack_msg_queue_msgctl, - .msg_queue_msgsnd = smack_msg_queue_msgsnd, - .msg_queue_msgrcv = smack_msg_queue_msgrcv, - - .shm_alloc_security = smack_shm_alloc_security, - .shm_free_security = smack_shm_free_security, - .shm_associate = smack_shm_associate, - .shm_shmctl = smack_shm_shmctl, - .shm_shmat = smack_shm_shmat, - - .sem_alloc_security = smack_sem_alloc_security, - .sem_free_security = smack_sem_free_security, - .sem_associate = smack_sem_associate, - .sem_semctl = smack_sem_semctl, - .sem_semop = smack_sem_semop, - - .d_instantiate = smack_d_instantiate, - - .getprocattr = smack_getprocattr, - .setprocattr = smack_setprocattr, - - .unix_stream_connect = smack_unix_stream_connect, - .unix_may_send = smack_unix_may_send, - - .socket_post_create = smack_socket_post_create, + LSM_HOOK_INIT(name, "smack"), + + LSM_HOOK_INIT(ptrace_access_check, smack_ptrace_access_check), + LSM_HOOK_INIT(ptrace_traceme, smack_ptrace_traceme), + LSM_HOOK_INIT(syslog, smack_syslog), + + LSM_HOOK_INIT(sb_alloc_security, smack_sb_alloc_security), + LSM_HOOK_INIT(sb_free_security, smack_sb_free_security), + LSM_HOOK_INIT(sb_copy_data, smack_sb_copy_data), + LSM_HOOK_INIT(sb_kern_mount, smack_sb_kern_mount), + LSM_HOOK_INIT(sb_statfs, smack_sb_statfs), + + LSM_HOOK_INIT(bprm_set_creds, smack_bprm_set_creds), + LSM_HOOK_INIT(bprm_committing_creds, smack_bprm_committing_creds), + LSM_HOOK_INIT(bprm_secureexec, smack_bprm_secureexec), + + LSM_HOOK_INIT(inode_alloc_security, smack_inode_alloc_security), + LSM_HOOK_INIT(inode_free_security, smack_inode_free_security), + LSM_HOOK_INIT(inode_init_security, smack_inode_init_security), + LSM_HOOK_INIT(inode_link, smack_inode_link), + LSM_HOOK_INIT(inode_unlink, smack_inode_unlink), + LSM_HOOK_INIT(inode_rmdir, smack_inode_rmdir), + LSM_HOOK_INIT(inode_rename, smack_inode_rename), + LSM_HOOK_INIT(inode_permission, smack_inode_permission), + LSM_HOOK_INIT(inode_setattr, smack_inode_setattr), + LSM_HOOK_INIT(inode_getattr, smack_inode_getattr), + LSM_HOOK_INIT(inode_setxattr, smack_inode_setxattr), + LSM_HOOK_INIT(inode_post_setxattr, smack_inode_post_setxattr), + LSM_HOOK_INIT(inode_getxattr, smack_inode_getxattr), + LSM_HOOK_INIT(inode_removexattr, smack_inode_removexattr), + LSM_HOOK_INIT(inode_getsecurity, smack_inode_getsecurity), + LSM_HOOK_INIT(inode_setsecurity, smack_inode_setsecurity), + LSM_HOOK_INIT(inode_listsecurity, smack_inode_listsecurity), + LSM_HOOK_INIT(inode_getsecid, smack_inode_getsecid), + + LSM_HOOK_INIT(file_permission, smack_file_permission), + LSM_HOOK_INIT(file_alloc_security, smack_file_alloc_security), + LSM_HOOK_INIT(file_free_security, smack_file_free_security), + LSM_HOOK_INIT(file_ioctl, smack_file_ioctl), + LSM_HOOK_INIT(file_lock, smack_file_lock), + LSM_HOOK_INIT(file_fcntl, smack_file_fcntl), + LSM_HOOK_INIT(mmap_file, smack_mmap_file), + LSM_HOOK_INIT(mmap_addr, cap_mmap_addr), + LSM_HOOK_INIT(file_set_fowner, smack_file_set_fowner), + LSM_HOOK_INIT(file_send_sigiotask, smack_file_send_sigiotask), + LSM_HOOK_INIT(file_receive, smack_file_receive), + + LSM_HOOK_INIT(file_open, smack_file_open), + + LSM_HOOK_INIT(cred_alloc_blank, smack_cred_alloc_blank), + LSM_HOOK_INIT(cred_free, smack_cred_free), + LSM_HOOK_INIT(cred_prepare, smack_cred_prepare), + LSM_HOOK_INIT(cred_transfer, smack_cred_transfer), + LSM_HOOK_INIT(kernel_act_as, smack_kernel_act_as), + LSM_HOOK_INIT(kernel_create_files_as, smack_kernel_create_files_as), + LSM_HOOK_INIT(task_setpgid, smack_task_setpgid), + LSM_HOOK_INIT(task_getpgid, smack_task_getpgid), + LSM_HOOK_INIT(task_getsid, smack_task_getsid), + LSM_HOOK_INIT(task_getsecid, smack_task_getsecid), + LSM_HOOK_INIT(task_setnice, smack_task_setnice), + LSM_HOOK_INIT(task_setioprio, smack_task_setioprio), + LSM_HOOK_INIT(task_getioprio, smack_task_getioprio), + LSM_HOOK_INIT(task_setscheduler, smack_task_setscheduler), + LSM_HOOK_INIT(task_getscheduler, smack_task_getscheduler), + LSM_HOOK_INIT(task_movememory, smack_task_movememory), + LSM_HOOK_INIT(task_kill, smack_task_kill), + LSM_HOOK_INIT(task_wait, smack_task_wait), + LSM_HOOK_INIT(task_to_inode, smack_task_to_inode), + + LSM_HOOK_INIT(ipc_permission, smack_ipc_permission), + LSM_HOOK_INIT(ipc_getsecid, smack_ipc_getsecid), + + LSM_HOOK_INIT(msg_msg_alloc_security, smack_msg_msg_alloc_security), + LSM_HOOK_INIT(msg_msg_free_security, smack_msg_msg_free_security), + + LSM_HOOK_INIT(msg_queue_alloc_security, smack_msg_queue_alloc_security), + LSM_HOOK_INIT(msg_queue_free_security, smack_msg_queue_free_security), + LSM_HOOK_INIT(msg_queue_associate, smack_msg_queue_associate), + LSM_HOOK_INIT(msg_queue_msgctl, smack_msg_queue_msgctl), + LSM_HOOK_INIT(msg_queue_msgsnd, smack_msg_queue_msgsnd), + LSM_HOOK_INIT(msg_queue_msgrcv, smack_msg_queue_msgrcv), + + LSM_HOOK_INIT(shm_alloc_security, smack_shm_alloc_security), + LSM_HOOK_INIT(shm_free_security, smack_shm_free_security), + LSM_HOOK_INIT(shm_associate, smack_shm_associate), + LSM_HOOK_INIT(shm_shmctl, smack_shm_shmctl), + LSM_HOOK_INIT(shm_shmat, smack_shm_shmat), + + LSM_HOOK_INIT(sem_alloc_security, smack_sem_alloc_security), + LSM_HOOK_INIT(sem_free_security, smack_sem_free_security), + LSM_HOOK_INIT(sem_associate, smack_sem_associate), + LSM_HOOK_INIT(sem_semctl, smack_sem_semctl), + LSM_HOOK_INIT(sem_semop, smack_sem_semop), + + LSM_HOOK_INIT(d_instantiate, smack_d_instantiate), + + LSM_HOOK_INIT(getprocattr, smack_getprocattr), + LSM_HOOK_INIT(setprocattr, smack_setprocattr), + + LSM_HOOK_INIT(unix_stream_connect, smack_unix_stream_connect), + LSM_HOOK_INIT(unix_may_send, smack_unix_may_send), + + LSM_HOOK_INIT(socket_post_create, smack_socket_post_create), #ifndef CONFIG_SECURITY_SMACK_NETFILTER - .socket_bind = smack_socket_bind, + LSM_HOOK_INIT(socket_bind, smack_socket_bind), #endif /* CONFIG_SECURITY_SMACK_NETFILTER */ - .socket_connect = smack_socket_connect, - .socket_sendmsg = smack_socket_sendmsg, - .socket_sock_rcv_skb = smack_socket_sock_rcv_skb, - .socket_getpeersec_stream = smack_socket_getpeersec_stream, - .socket_getpeersec_dgram = smack_socket_getpeersec_dgram, - .sk_alloc_security = smack_sk_alloc_security, - .sk_free_security = smack_sk_free_security, - .sock_graft = smack_sock_graft, - .inet_conn_request = smack_inet_conn_request, - .inet_csk_clone = smack_inet_csk_clone, + LSM_HOOK_INIT(socket_connect, smack_socket_connect), + LSM_HOOK_INIT(socket_sendmsg, smack_socket_sendmsg), + LSM_HOOK_INIT(socket_sock_rcv_skb, smack_socket_sock_rcv_skb), + LSM_HOOK_INIT(socket_getpeersec_stream, smack_socket_getpeersec_stream), + LSM_HOOK_INIT(socket_getpeersec_dgram, smack_socket_getpeersec_dgram), + LSM_HOOK_INIT(sk_alloc_security, smack_sk_alloc_security), + LSM_HOOK_INIT(sk_free_security, smack_sk_free_security), + LSM_HOOK_INIT(sock_graft, smack_sock_graft), + LSM_HOOK_INIT(inet_conn_request, smack_inet_conn_request), + LSM_HOOK_INIT(inet_csk_clone, smack_inet_csk_clone), /* key management security hooks */ #ifdef CONFIG_KEYS - .key_alloc = smack_key_alloc, - .key_free = smack_key_free, - .key_permission = smack_key_permission, - .key_getsecurity = smack_key_getsecurity, + LSM_HOOK_INIT(key_alloc, smack_key_alloc), + LSM_HOOK_INIT(key_free, smack_key_free), + LSM_HOOK_INIT(key_permission, smack_key_permission), + LSM_HOOK_INIT(key_getsecurity, smack_key_getsecurity), #endif /* CONFIG_KEYS */ /* Audit hooks */ #ifdef CONFIG_AUDIT - .audit_rule_init = smack_audit_rule_init, - .audit_rule_known = smack_audit_rule_known, - .audit_rule_match = smack_audit_rule_match, - .audit_rule_free = smack_audit_rule_free, + LSM_HOOK_INIT(audit_rule_init, smack_audit_rule_init), + LSM_HOOK_INIT(audit_rule_known, smack_audit_rule_known), + LSM_HOOK_INIT(audit_rule_match, smack_audit_rule_match), + LSM_HOOK_INIT(audit_rule_free, smack_audit_rule_free), #endif /* CONFIG_AUDIT */ - .ismaclabel = smack_ismaclabel, - .secid_to_secctx = smack_secid_to_secctx, - .secctx_to_secid = smack_secctx_to_secid, - .release_secctx = smack_release_secctx, - .inode_notifysecctx = smack_inode_notifysecctx, - .inode_setsecctx = smack_inode_setsecctx, - .inode_getsecctx = smack_inode_getsecctx, + LSM_HOOK_INIT(ismaclabel, smack_ismaclabel), + LSM_HOOK_INIT(secid_to_secctx, smack_secid_to_secctx), + LSM_HOOK_INIT(secctx_to_secid, smack_secctx_to_secid), + LSM_HOOK_INIT(release_secctx, smack_release_secctx), + LSM_HOOK_INIT(inode_notifysecctx, smack_inode_notifysecctx), + LSM_HOOK_INIT(inode_setsecctx, smack_inode_setsecctx), + LSM_HOOK_INIT(inode_getsecctx, smack_inode_getsecctx), }; diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 2f7b46855f48..bce13583efda 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -503,35 +503,35 @@ static int tomoyo_socket_sendmsg(struct socket *sock, struct msghdr *msg, * registering TOMOYO. */ static struct security_operations tomoyo_security_ops = { - .name = "tomoyo", - .cred_alloc_blank = tomoyo_cred_alloc_blank, - .cred_prepare = tomoyo_cred_prepare, - .cred_transfer = tomoyo_cred_transfer, - .cred_free = tomoyo_cred_free, - .bprm_set_creds = tomoyo_bprm_set_creds, - .bprm_check_security = tomoyo_bprm_check_security, - .file_fcntl = tomoyo_file_fcntl, - .file_open = tomoyo_file_open, - .path_truncate = tomoyo_path_truncate, - .path_unlink = tomoyo_path_unlink, - .path_mkdir = tomoyo_path_mkdir, - .path_rmdir = tomoyo_path_rmdir, - .path_symlink = tomoyo_path_symlink, - .path_mknod = tomoyo_path_mknod, - .path_link = tomoyo_path_link, - .path_rename = tomoyo_path_rename, - .inode_getattr = tomoyo_inode_getattr, - .file_ioctl = tomoyo_file_ioctl, - .path_chmod = tomoyo_path_chmod, - .path_chown = tomoyo_path_chown, - .path_chroot = tomoyo_path_chroot, - .sb_mount = tomoyo_sb_mount, - .sb_umount = tomoyo_sb_umount, - .sb_pivotroot = tomoyo_sb_pivotroot, - .socket_bind = tomoyo_socket_bind, - .socket_connect = tomoyo_socket_connect, - .socket_listen = tomoyo_socket_listen, - .socket_sendmsg = tomoyo_socket_sendmsg, + LSM_HOOK_INIT(name, "tomoyo"), + LSM_HOOK_INIT(cred_alloc_blank, tomoyo_cred_alloc_blank), + LSM_HOOK_INIT(cred_prepare, tomoyo_cred_prepare), + LSM_HOOK_INIT(cred_transfer, tomoyo_cred_transfer), + LSM_HOOK_INIT(cred_free, tomoyo_cred_free), + LSM_HOOK_INIT(bprm_set_creds, tomoyo_bprm_set_creds), + LSM_HOOK_INIT(bprm_check_security, tomoyo_bprm_check_security), + LSM_HOOK_INIT(file_fcntl, tomoyo_file_fcntl), + LSM_HOOK_INIT(file_open, tomoyo_file_open), + LSM_HOOK_INIT(path_truncate, tomoyo_path_truncate), + LSM_HOOK_INIT(path_unlink, tomoyo_path_unlink), + LSM_HOOK_INIT(path_mkdir, tomoyo_path_mkdir), + LSM_HOOK_INIT(path_rmdir, tomoyo_path_rmdir), + LSM_HOOK_INIT(path_symlink, tomoyo_path_symlink), + LSM_HOOK_INIT(path_mknod, tomoyo_path_mknod), + LSM_HOOK_INIT(path_link, tomoyo_path_link), + LSM_HOOK_INIT(path_rename, tomoyo_path_rename), + LSM_HOOK_INIT(inode_getattr, tomoyo_inode_getattr), + LSM_HOOK_INIT(file_ioctl, tomoyo_file_ioctl), + LSM_HOOK_INIT(path_chmod, tomoyo_path_chmod), + LSM_HOOK_INIT(path_chown, tomoyo_path_chown), + LSM_HOOK_INIT(path_chroot, tomoyo_path_chroot), + LSM_HOOK_INIT(sb_mount, tomoyo_sb_mount), + LSM_HOOK_INIT(sb_umount, tomoyo_sb_umount), + LSM_HOOK_INIT(sb_pivotroot, tomoyo_sb_pivotroot), + LSM_HOOK_INIT(socket_bind, tomoyo_socket_bind), + LSM_HOOK_INIT(socket_connect, tomoyo_socket_connect), + LSM_HOOK_INIT(socket_listen, tomoyo_socket_listen), + LSM_HOOK_INIT(socket_sendmsg, tomoyo_socket_sendmsg), }; /* Lock for GC. */ diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index 14557ffa7b4d..23dd4c6246b2 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -366,12 +366,12 @@ int yama_ptrace_traceme(struct task_struct *parent) #ifndef CONFIG_SECURITY_YAMA_STACKED static struct security_operations yama_ops = { - .name = "yama", + LSM_HOOK_INIT(name, "yama"), - .ptrace_access_check = yama_ptrace_access_check, - .ptrace_traceme = yama_ptrace_traceme, - .task_prctl = yama_task_prctl, - .task_free = yama_task_free, + LSM_HOOK_INIT(ptrace_access_check, yama_ptrace_access_check), + LSM_HOOK_INIT(ptrace_traceme, yama_ptrace_traceme), + LSM_HOOK_INIT(task_prctl, yama_task_prctl), + LSM_HOOK_INIT(task_free, yama_task_free), }; #endif -- cgit v1.2.3 From b1d9e6b0646d0e5ee5d9050bd236b6c65d66faef Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Sat, 2 May 2015 15:11:42 -0700 Subject: LSM: Switch to lists of hooks Instead of using a vector of security operations with explicit, special case stacking of the capability and yama hooks use lists of hooks with capability and yama hooks included as appropriate. The security_operations structure is no longer required. Instead, there is a union of the function pointers that allows all the hooks lists to use a common mechanism for list management while retaining typing. Each module supplies an array describing the hooks it provides instead of a sparsely populated security_operations structure. The description includes the element that gets put on the hook list, avoiding the issues surrounding individual element allocation. The method for registering security modules is changed to reflect the information available. The method for removing a module, currently only used by SELinux, has also changed. It should be generic now, however if there are potential race conditions based on ordering of hook removal that needs to be addressed by the calling module. The security hooks are called from the lists and the first failure is returned. Signed-off-by: Casey Schaufler Acked-by: John Johansen Acked-by: Kees Cook Acked-by: Paul Moore Acked-by: Stephen Smalley Acked-by: Tetsuo Handa Signed-off-by: James Morris --- include/linux/lsm_hooks.h | 77 ++++-- include/linux/security.h | 46 +--- security/Makefile | 2 +- security/apparmor/domain.c | 12 +- security/apparmor/lsm.c | 51 ++-- security/commoncap.c | 41 +++- security/security.c | 570 +++++++++++++++++++++++++++++++++++++-------- security/selinux/hooks.c | 94 ++------ security/smack/smack.h | 2 - security/smack/smack_lsm.c | 53 +---- security/smack/smackfs.c | 2 +- security/tomoyo/tomoyo.c | 14 +- security/yama/yama_lsm.c | 50 ++-- 13 files changed, 627 insertions(+), 387 deletions(-) (limited to 'include') diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h index 27dd6fcacccc..f014f2596e22 100644 --- a/include/linux/lsm_hooks.h +++ b/include/linux/lsm_hooks.h @@ -25,21 +25,10 @@ #define __LINUX_LSM_HOOKS_H #include - -/* Maximum number of letters for an LSM name string */ -#define SECURITY_NAME_MAX 10 - -#ifdef CONFIG_SECURITY +#include +#include /** - * struct security_operations - main security structure - * - * Security module identifier. - * - * @name: - * A string that acts as a unique identifier for the LSM with max number - * of characters = SECURITY_NAME_MAX. - * * Security hooks for program execution operations. * * @bprm_set_creds: @@ -1310,9 +1299,7 @@ * This is the main security structure. */ -struct security_operations { - char name[SECURITY_NAME_MAX + 1]; - +union security_list_options { int (*binder_set_context_mgr)(struct task_struct *mgr); int (*binder_transaction)(struct task_struct *from, struct task_struct *to); @@ -1837,21 +1824,63 @@ struct security_hook_heads { #endif /* CONFIG_AUDIT */ }; +/* + * Security module hook list structure. + * For use with generic list macros for common operations. + */ +struct security_hook_list { + struct list_head list; + struct list_head *head; + union security_list_options hook; +}; + /* * Initializing a security_hook_list structure takes * up a lot of space in a source file. This macro takes * care of the common case and reduces the amount of * text involved. - * Casey says: Comment is true in the next patch. */ -#define LSM_HOOK_INIT(HEAD, HOOK) .HEAD = HOOK +#define LSM_HOOK_INIT(HEAD, HOOK) \ + { .head = &security_hook_heads.HEAD, .hook = { .HEAD = HOOK } } + +extern struct security_hook_heads security_hook_heads; + +static inline void security_add_hooks(struct security_hook_list *hooks, + int count) +{ + int i; -/* prototypes */ -extern int security_module_enable(struct security_operations *ops); -extern int register_security(struct security_operations *ops); -extern void __init security_fixup_ops(struct security_operations *ops); -extern void reset_security_ops(void); + for (i = 0; i < count; i++) + list_add_tail_rcu(&hooks[i].list, hooks[i].head); +} -#endif /* CONFIG_SECURITY */ +#ifdef CONFIG_SECURITY_SELINUX_DISABLE +/* + * Assuring the safety of deleting a security module is up to + * the security module involved. This may entail ordering the + * module's hook list in a particular way, refusing to disable + * the module once a policy is loaded or any number of other + * actions better imagined than described. + * + * The name of the configuration option reflects the only module + * that currently uses the mechanism. Any developer who thinks + * disabling their module is a good idea needs to be at least as + * careful as the SELinux team. + */ +static inline void security_delete_hooks(struct security_hook_list *hooks, + int count) +{ + int i; + + for (i = 0; i < count; i++) + list_del_rcu(&hooks[i].list); +} +#endif /* CONFIG_SECURITY_SELINUX_DISABLE */ + +extern int __init security_module_enable(const char *module); +extern void __init capability_add_hooks(void); +#ifdef CONFIG_SECURITY_YAMA_STACKED +void __init yama_add_hooks(void); +#endif #endif /* ! __LINUX_LSM_HOOKS_H */ diff --git a/include/linux/security.h b/include/linux/security.h index a2a100e7ac6e..8c8175d41b4c 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -27,6 +27,7 @@ #include #include #include +#include struct linux_binprm; struct cred; @@ -54,9 +55,6 @@ struct xattr; struct xfrm_sec_ctx; struct mm_struct; -/* Maximum number of letters for an LSM name string */ -#define SECURITY_NAME_MAX 10 - /* If capable should audit the security request */ #define SECURITY_CAP_NOAUDIT 0 #define SECURITY_CAP_AUDIT 1 @@ -69,10 +67,7 @@ struct audit_krule; struct user_namespace; struct timezone; -/* - * These functions are in security/capability.c and are used - * as the default capabilities functions - */ +/* These functions are in security/commoncap.c */ extern int cap_capable(const struct cred *cred, struct user_namespace *ns, int cap, int audit); extern int cap_settime(const struct timespec *ts, const struct timezone *tz); @@ -114,8 +109,6 @@ struct xfrm_state; struct xfrm_user_sec_ctx; struct seq_file; -extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb); - #ifdef CONFIG_MMU extern unsigned long mmap_min_addr; extern unsigned long dac_mmap_min_addr; @@ -472,7 +465,7 @@ static inline int security_settime(const struct timespec *ts, static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) { - return cap_vm_enough_memory(mm, pages); + return __vm_enough_memory(mm, pages, cap_vm_enough_memory(mm, pages)); } static inline int security_bprm_set_creds(struct linux_binprm *bprm) @@ -1075,7 +1068,7 @@ static inline int security_setprocattr(struct task_struct *p, char *name, void * static inline int security_netlink_send(struct sock *sk, struct sk_buff *skb) { - return cap_netlink_send(sk, skb); + return 0; } static inline int security_ismaclabel(const char *name) @@ -1643,36 +1636,5 @@ static inline void free_secdata(void *secdata) { } #endif /* CONFIG_SECURITY */ -#ifdef CONFIG_SECURITY_YAMA -extern int yama_ptrace_access_check(struct task_struct *child, - unsigned int mode); -extern int yama_ptrace_traceme(struct task_struct *parent); -extern void yama_task_free(struct task_struct *task); -extern int yama_task_prctl(int option, unsigned long arg2, unsigned long arg3, - unsigned long arg4, unsigned long arg5); -#else -static inline int yama_ptrace_access_check(struct task_struct *child, - unsigned int mode) -{ - return 0; -} - -static inline int yama_ptrace_traceme(struct task_struct *parent) -{ - return 0; -} - -static inline void yama_task_free(struct task_struct *task) -{ -} - -static inline int yama_task_prctl(int option, unsigned long arg2, - unsigned long arg3, unsigned long arg4, - unsigned long arg5) -{ - return -ENOSYS; -} -#endif /* CONFIG_SECURITY_YAMA */ - #endif /* ! __LINUX_SECURITY_H */ diff --git a/security/Makefile b/security/Makefile index 05f1c934d74b..c9bfbc84ff50 100644 --- a/security/Makefile +++ b/security/Makefile @@ -14,7 +14,7 @@ obj-y += commoncap.o obj-$(CONFIG_MMU) += min_addr.o # Object file lists -obj-$(CONFIG_SECURITY) += security.o capability.o +obj-$(CONFIG_SECURITY) += security.o obj-$(CONFIG_SECURITYFS) += inode.o obj-$(CONFIG_SECURITY_SELINUX) += selinux/ obj-$(CONFIG_SECURITY_SMACK) += smack/ diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c index d97cba3e3849..dc0027b28b04 100644 --- a/security/apparmor/domain.c +++ b/security/apparmor/domain.c @@ -347,9 +347,7 @@ int apparmor_bprm_set_creds(struct linux_binprm *bprm) file_inode(bprm->file)->i_mode }; const char *name = NULL, *target = NULL, *info = NULL; - int error = cap_bprm_set_creds(bprm); - if (error) - return error; + int error = 0; if (bprm->cred_prepared) return 0; @@ -531,15 +529,13 @@ cleanup: */ int apparmor_bprm_secureexec(struct linux_binprm *bprm) { - int ret = cap_bprm_secureexec(bprm); - /* the decision to use secure exec is computed in set_creds * and stored in bprm->unsafe. */ - if (!ret && (bprm->unsafe & AA_SECURE_X_NEEDED)) - ret = 1; + if (bprm->unsafe & AA_SECURE_X_NEEDED) + return 1; - return ret; + return 0; } /** diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index f54253258fb8..5696874e8062 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -96,19 +96,11 @@ static void apparmor_cred_transfer(struct cred *new, const struct cred *old) static int apparmor_ptrace_access_check(struct task_struct *child, unsigned int mode) { - int error = cap_ptrace_access_check(child, mode); - if (error) - return error; - return aa_ptrace(current, child, mode); } static int apparmor_ptrace_traceme(struct task_struct *parent) { - int error = cap_ptrace_traceme(parent); - if (error) - return error; - return aa_ptrace(parent, current, PTRACE_MODE_ATTACH); } @@ -123,10 +115,10 @@ static int apparmor_capget(struct task_struct *target, kernel_cap_t *effective, cred = __task_cred(target); profile = aa_cred_profile(cred); - *effective = cred->cap_effective; - *inheritable = cred->cap_inheritable; - *permitted = cred->cap_permitted; - + /* + * cap_capget is stacked ahead of this and will + * initialize effective and permitted. + */ if (!unconfined(profile) && !COMPLAIN_MODE(profile)) { *effective = cap_intersect(*effective, profile->caps.allow); *permitted = cap_intersect(*permitted, profile->caps.allow); @@ -140,13 +132,11 @@ static int apparmor_capable(const struct cred *cred, struct user_namespace *ns, int cap, int audit) { struct aa_profile *profile; - /* cap_capable returns 0 on success, else -EPERM */ - int error = cap_capable(cred, ns, cap, audit); - if (!error) { - profile = aa_cred_profile(cred); - if (!unconfined(profile)) - error = aa_capable(profile, cap, audit); - } + int error = 0; + + profile = aa_cred_profile(cred); + if (!unconfined(profile)) + error = aa_capable(profile, cap, audit); return error; } @@ -615,9 +605,7 @@ static int apparmor_task_setrlimit(struct task_struct *task, return error; } -static struct security_operations apparmor_ops = { - LSM_HOOK_INIT(name, "apparmor"), - +static struct security_hook_list apparmor_hooks[] = { LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme), LSM_HOOK_INIT(capget, apparmor_capget), @@ -640,7 +628,6 @@ static struct security_operations apparmor_ops = { LSM_HOOK_INIT(file_alloc_security, apparmor_file_alloc_security), LSM_HOOK_INIT(file_free_security, apparmor_file_free_security), LSM_HOOK_INIT(mmap_file, apparmor_mmap_file), - LSM_HOOK_INIT(mmap_addr, cap_mmap_addr), LSM_HOOK_INIT(file_mprotect, apparmor_file_mprotect), LSM_HOOK_INIT(file_lock, apparmor_file_lock), @@ -898,7 +885,7 @@ static int __init apparmor_init(void) { int error; - if (!apparmor_enabled || !security_module_enable(&apparmor_ops)) { + if (!apparmor_enabled || !security_module_enable("apparmor")) { aa_info_message("AppArmor disabled by boot time parameter"); apparmor_enabled = 0; return 0; @@ -913,17 +900,10 @@ static int __init apparmor_init(void) error = set_init_cxt(); if (error) { AA_ERROR("Failed to set context on init task\n"); - goto register_security_out; - } - - error = register_security(&apparmor_ops); - if (error) { - struct cred *cred = (struct cred *)current->real_cred; - aa_free_task_context(cred_cxt(cred)); - cred_cxt(cred) = NULL; - AA_ERROR("Unable to register AppArmor\n"); - goto register_security_out; + aa_free_root_ns(); + goto alloc_out; } + security_add_hooks(apparmor_hooks, ARRAY_SIZE(apparmor_hooks)); /* Report that AppArmor successfully initialized */ apparmor_initialized = 1; @@ -936,9 +916,6 @@ static int __init apparmor_init(void) return error; -register_security_out: - aa_free_root_ns(); - alloc_out: aa_destroy_aafs(); diff --git a/security/commoncap.c b/security/commoncap.c index f2875cd9f677..d103f5a4043d 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -53,11 +53,6 @@ static void warn_setuid_and_fcaps_mixed(const char *fname) } } -int cap_netlink_send(struct sock *sk, struct sk_buff *skb) -{ - return 0; -} - /** * cap_capable - Determine whether a task has a particular effective capability * @cred: The credentials to use @@ -941,7 +936,7 @@ int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3, * @pages: The size of the mapping * * Determine whether the allocation of a new virtual mapping by the current - * task is permitted, returning 0 if permission is granted, -ve if not. + * task is permitted, returning 1 if permission is granted, 0 if not. */ int cap_vm_enough_memory(struct mm_struct *mm, long pages) { @@ -950,7 +945,7 @@ int cap_vm_enough_memory(struct mm_struct *mm, long pages) if (cap_capable(current_cred(), &init_user_ns, CAP_SYS_ADMIN, SECURITY_CAP_NOAUDIT) == 0) cap_sys_admin = 1; - return __vm_enough_memory(mm, pages, cap_sys_admin); + return cap_sys_admin; } /* @@ -981,3 +976,33 @@ int cap_mmap_file(struct file *file, unsigned long reqprot, { return 0; } + +#ifdef CONFIG_SECURITY + +struct security_hook_list capability_hooks[] = { + LSM_HOOK_INIT(capable, cap_capable), + LSM_HOOK_INIT(settime, cap_settime), + LSM_HOOK_INIT(ptrace_access_check, cap_ptrace_access_check), + LSM_HOOK_INIT(ptrace_traceme, cap_ptrace_traceme), + LSM_HOOK_INIT(capget, cap_capget), + LSM_HOOK_INIT(capset, cap_capset), + LSM_HOOK_INIT(bprm_set_creds, cap_bprm_set_creds), + LSM_HOOK_INIT(bprm_secureexec, cap_bprm_secureexec), + LSM_HOOK_INIT(inode_need_killpriv, cap_inode_need_killpriv), + LSM_HOOK_INIT(inode_killpriv, cap_inode_killpriv), + LSM_HOOK_INIT(mmap_addr, cap_mmap_addr), + LSM_HOOK_INIT(mmap_file, cap_mmap_file), + LSM_HOOK_INIT(task_fix_setuid, cap_task_fix_setuid), + LSM_HOOK_INIT(task_prctl, cap_task_prctl), + LSM_HOOK_INIT(task_setscheduler, cap_task_setscheduler), + LSM_HOOK_INIT(task_setioprio, cap_task_setioprio), + LSM_HOOK_INIT(task_setnice, cap_task_setnice), + LSM_HOOK_INIT(vm_enough_memory, cap_vm_enough_memory), +}; + +void __init capability_add_hooks(void) +{ + security_add_hooks(capability_hooks, ARRAY_SIZE(capability_hooks)); +} + +#endif /* CONFIG_SECURITY */ diff --git a/security/security.c b/security/security.c index 02dc72006afa..bd4c5f6a5b78 100644 --- a/security/security.c +++ b/security/security.c @@ -29,24 +29,13 @@ #define MAX_LSM_EVM_XATTR 2 +/* Maximum number of letters for an LSM name string */ +#define SECURITY_NAME_MAX 10 + /* Boot-time LSM user choice */ static __initdata char chosen_lsm[SECURITY_NAME_MAX + 1] = CONFIG_DEFAULT_SECURITY; -static struct security_operations *security_ops; -static struct security_operations default_security_ops = { - .name = "default", -}; - -static inline int __init verify(struct security_operations *ops) -{ - /* verify the security_operations structure exists */ - if (!ops) - return -EINVAL; - security_fixup_ops(ops); - return 0; -} - static void __init do_security_initcalls(void) { initcall_t *call; @@ -64,20 +53,27 @@ static void __init do_security_initcalls(void) */ int __init security_init(void) { - printk(KERN_INFO "Security Framework initialized\n"); + pr_info("Security Framework initialized\n"); - security_fixup_ops(&default_security_ops); - security_ops = &default_security_ops; + /* + * Always load the capability module. + */ + capability_add_hooks(); +#ifdef CONFIG_SECURITY_YAMA_STACKED + /* + * If Yama is configured for stacking load it next. + */ + yama_add_hooks(); +#endif + /* + * Load the chosen module if there is one. + * This will also find yama if it is stacking + */ do_security_initcalls(); return 0; } -void reset_security_ops(void) -{ - security_ops = &default_security_ops; -} - /* Save user chosen LSM */ static int __init choose_lsm(char *str) { @@ -88,7 +84,7 @@ __setup("security=", choose_lsm); /** * security_module_enable - Load given security module on boot ? - * @ops: a pointer to the struct security_operations that is to be checked. + * @module: the name of the module * * Each LSM must pass this method before registering its own operations * to avoid security registration races. This method may also be used @@ -100,41 +96,13 @@ __setup("security=", choose_lsm); * choose an alternate LSM at boot time. * Otherwise, return false. */ -int __init security_module_enable(struct security_operations *ops) +int __init security_module_enable(const char *module) { - return !strcmp(ops->name, chosen_lsm); -} - -/** - * register_security - registers a security framework with the kernel - * @ops: a pointer to the struct security_options that is to be registered - * - * This function allows a security module to register itself with the - * kernel security subsystem. Some rudimentary checking is done on the @ops - * value passed to this function. You'll need to check first if your LSM - * is allowed to register its @ops by calling security_module_enable(@ops). - * - * If there is already a security module registered with the kernel, - * an error will be returned. Otherwise %0 is returned on success. - */ -int __init register_security(struct security_operations *ops) -{ - if (verify(ops)) { - printk(KERN_DEBUG "%s could not verify " - "security_operations structure.\n", __func__); - return -EINVAL; - } - - if (security_ops != &default_security_ops) - return -EAGAIN; - - security_ops = ops; - - return 0; + return !strcmp(module, chosen_lsm); } /* - * Hook operation macros. + * Hook list operation macros. * * call_void_hook: * This is a hook that does not return a value. @@ -143,8 +111,27 @@ int __init register_security(struct security_operations *ops) * This is a hook that returns a value. */ -#define call_void_hook(FUNC, ...) security_ops->FUNC(__VA_ARGS__) -#define call_int_hook(FUNC, IRC, ...) security_ops->FUNC(__VA_ARGS__) +#define call_void_hook(FUNC, ...) \ + do { \ + struct security_hook_list *P; \ + \ + list_for_each_entry(P, &security_hook_heads.FUNC, list) \ + P->hook.FUNC(__VA_ARGS__); \ + } while (0) + +#define call_int_hook(FUNC, IRC, ...) ({ \ + int RC = IRC; \ + do { \ + struct security_hook_list *P; \ + \ + list_for_each_entry(P, &security_hook_heads.FUNC, list) { \ + RC = P->hook.FUNC(__VA_ARGS__); \ + if (RC != 0) \ + break; \ + } \ + } while (0); \ + RC; \ +}) /* Security operations */ @@ -173,23 +160,11 @@ int security_binder_transfer_file(struct task_struct *from, int security_ptrace_access_check(struct task_struct *child, unsigned int mode) { -#ifdef CONFIG_SECURITY_YAMA_STACKED - int rc; - rc = yama_ptrace_access_check(child, mode); - if (rc) - return rc; -#endif return call_int_hook(ptrace_access_check, 0, child, mode); } int security_ptrace_traceme(struct task_struct *parent) { -#ifdef CONFIG_SECURITY_YAMA_STACKED - int rc; - rc = yama_ptrace_traceme(parent); - if (rc) - return rc; -#endif return call_int_hook(ptrace_traceme, 0, parent); } @@ -245,7 +220,25 @@ int security_settime(const struct timespec *ts, const struct timezone *tz) int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) { - return call_int_hook(vm_enough_memory, 0, mm, pages); + struct security_hook_list *hp; + int cap_sys_admin = 1; + int rc; + + /* + * The module will respond with a positive value if + * it thinks the __vm_enough_memory() call should be + * made with the cap_sys_admin set. If all of the modules + * agree that it should be set it will. If any module + * thinks it should not be set it won't. + */ + list_for_each_entry(hp, &security_hook_heads.vm_enough_memory, list) { + rc = hp->hook.vm_enough_memory(mm, pages); + if (rc <= 0) { + cap_sys_admin = 0; + break; + } + } + return __vm_enough_memory(mm, pages, cap_sys_admin); } int security_bprm_set_creds(struct linux_binprm *bprm) @@ -335,8 +328,9 @@ int security_sb_set_mnt_opts(struct super_block *sb, unsigned long kern_flags, unsigned long *set_kern_flags) { - return call_int_hook(sb_set_mnt_opts, 0, sb, opts, kern_flags, - set_kern_flags); + return call_int_hook(sb_set_mnt_opts, + opts->num_mnt_opts ? -EOPNOTSUPP : 0, sb, + opts, kern_flags, set_kern_flags); } EXPORT_SYMBOL(security_sb_set_mnt_opts); @@ -369,8 +363,8 @@ int security_dentry_init_security(struct dentry *dentry, int mode, struct qstr *name, void **ctx, u32 *ctxlen) { - return call_int_hook(dentry_init_security, 0, dentry, mode, name, - ctx, ctxlen); + return call_int_hook(dentry_init_security, -EOPNOTSUPP, dentry, mode, + name, ctx, ctxlen); } EXPORT_SYMBOL(security_dentry_init_security); @@ -390,7 +384,7 @@ int security_inode_init_security(struct inode *inode, struct inode *dir, NULL, NULL, NULL); memset(new_xattrs, 0, sizeof(new_xattrs)); lsm_xattr = new_xattrs; - ret = call_int_hook(inode_init_security, 0, inode, dir, qstr, + ret = call_int_hook(inode_init_security, -EOPNOTSUPP, inode, dir, qstr, &lsm_xattr->name, &lsm_xattr->value, &lsm_xattr->value_len); @@ -636,8 +630,15 @@ int security_inode_setxattr(struct dentry *dentry, const char *name, if (unlikely(IS_PRIVATE(d_backing_inode(dentry)))) return 0; - ret = call_int_hook(inode_setxattr, 0, dentry, name, value, size, + /* + * SELinux and Smack integrate the cap call, + * so assume that all LSMs supplying this call do so. + */ + ret = call_int_hook(inode_setxattr, 1, dentry, name, value, size, flags); + + if (ret == 1) + ret = cap_inode_setxattr(dentry, name, value, size, flags); if (ret) return ret; ret = ima_inode_setxattr(dentry, name, value, size); @@ -675,7 +676,13 @@ int security_inode_removexattr(struct dentry *dentry, const char *name) if (unlikely(IS_PRIVATE(d_backing_inode(dentry)))) return 0; - ret = call_int_hook(inode_removexattr, 0, dentry, name); + /* + * SELinux and Smack integrate the cap call, + * so assume that all LSMs supplying this call do so. + */ + ret = call_int_hook(inode_removexattr, 1, dentry, name); + if (ret == 1) + ret = cap_inode_removexattr(dentry, name); if (ret) return ret; ret = ima_inode_removexattr(dentry, name); @@ -698,15 +705,16 @@ int security_inode_getsecurity(const struct inode *inode, const char *name, void { if (unlikely(IS_PRIVATE(inode))) return -EOPNOTSUPP; - return call_int_hook(inode_getsecurity, 0, inode, name, buffer, alloc); + return call_int_hook(inode_getsecurity, -EOPNOTSUPP, inode, name, + buffer, alloc); } int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags) { if (unlikely(IS_PRIVATE(inode))) return -EOPNOTSUPP; - return call_int_hook(inode_setsecurity, 0, inode, name, value, size, - flags); + return call_int_hook(inode_setsecurity, -EOPNOTSUPP, inode, name, + value, size, flags); } int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size) @@ -847,9 +855,6 @@ int security_task_create(unsigned long clone_flags) void security_task_free(struct task_struct *task) { -#ifdef CONFIG_SECURITY_YAMA_STACKED - yama_task_free(task); -#endif call_void_hook(task_free, task); } @@ -932,6 +937,7 @@ int security_task_getsid(struct task_struct *p) void security_task_getsecid(struct task_struct *p, u32 *secid) { + *secid = 0; call_void_hook(task_getsecid, p, secid); } EXPORT_SYMBOL(security_task_getsecid); @@ -986,13 +992,19 @@ int security_task_wait(struct task_struct *p) int security_task_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { -#ifdef CONFIG_SECURITY_YAMA_STACKED - int rc; - rc = yama_task_prctl(option, arg2, arg3, arg4, arg5); - if (rc != -ENOSYS) - return rc; -#endif - return call_int_hook(task_prctl, 0, option, arg2, arg3, arg4, arg5); + int thisrc; + int rc = -ENOSYS; + struct security_hook_list *hp; + + list_for_each_entry(hp, &security_hook_heads.task_prctl, list) { + thisrc = hp->hook.task_prctl(option, arg2, arg3, arg4, arg5); + if (thisrc != -ENOSYS) { + rc = thisrc; + if (thisrc != 0) + break; + } + } + return rc; } void security_task_to_inode(struct task_struct *p, struct inode *inode) @@ -1007,6 +1019,7 @@ int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag) void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid) { + *secid = 0; call_void_hook(ipc_getsecid, ipcp, secid); } @@ -1113,12 +1126,12 @@ EXPORT_SYMBOL(security_d_instantiate); int security_getprocattr(struct task_struct *p, char *name, char **value) { - return call_int_hook(getprocattr, 0, p, name, value); + return call_int_hook(getprocattr, -EINVAL, p, name, value); } int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size) { - return call_int_hook(setprocattr, 0, p, name, value, size); + return call_int_hook(setprocattr, -EINVAL, p, name, value, size); } int security_netlink_send(struct sock *sk, struct sk_buff *skb) @@ -1134,12 +1147,14 @@ EXPORT_SYMBOL(security_ismaclabel); int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) { - return call_int_hook(secid_to_secctx, 0, secid, secdata, seclen); + return call_int_hook(secid_to_secctx, -EOPNOTSUPP, secid, secdata, + seclen); } EXPORT_SYMBOL(security_secid_to_secctx); int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid) { + *secid = 0; return call_int_hook(secctx_to_secid, 0, secdata, seclen, secid); } EXPORT_SYMBOL(security_secctx_to_secid); @@ -1164,7 +1179,7 @@ EXPORT_SYMBOL(security_inode_setsecctx); int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen) { - return call_int_hook(inode_getsecctx, 0, inode, ctx, ctxlen); + return call_int_hook(inode_getsecctx, -EOPNOTSUPP, inode, ctx, ctxlen); } EXPORT_SYMBOL(security_inode_getsecctx); @@ -1259,8 +1274,8 @@ EXPORT_SYMBOL(security_sock_rcv_skb); int security_socket_getpeersec_stream(struct socket *sock, char __user *optval, int __user *optlen, unsigned len) { - return call_int_hook(socket_getpeersec_stream, 0, sock, optval, - optlen, len); + return call_int_hook(socket_getpeersec_stream, -ENOPROTOOPT, sock, + optval, optlen, len); } int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid) @@ -1438,7 +1453,24 @@ int security_xfrm_state_pol_flow_match(struct xfrm_state *x, struct xfrm_policy *xp, const struct flowi *fl) { - return call_int_hook(xfrm_state_pol_flow_match, 0, x, xp, fl); + struct security_hook_list *hp; + int rc = 1; + + /* + * Since this function is expected to return 0 or 1, the judgment + * becomes difficult if multiple LSMs supply this call. Fortunately, + * we can use the first LSM's judgment because currently only SELinux + * supplies this call. + * + * For speed optimization, we explicitly break the loop rather than + * using the macro + */ + list_for_each_entry(hp, &security_hook_heads.xfrm_state_pol_flow_match, + list) { + rc = hp->hook.xfrm_state_pol_flow_match(x, xp, fl); + break; + } + return rc; } int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid) @@ -1478,6 +1510,7 @@ int security_key_permission(key_ref_t key_ref, int security_key_getsecurity(struct key *key, char **_buffer) { + *_buffer = NULL; return call_int_hook(key_getsecurity, 0, key, _buffer); } @@ -1506,5 +1539,350 @@ int security_audit_rule_match(u32 secid, u32 field, u32 op, void *lsmrule, return call_int_hook(audit_rule_match, 0, secid, field, op, lsmrule, actx); } +#endif /* CONFIG_AUDIT */ +struct security_hook_heads security_hook_heads = { + .binder_set_context_mgr = + LIST_HEAD_INIT(security_hook_heads.binder_set_context_mgr), + .binder_transaction = + LIST_HEAD_INIT(security_hook_heads.binder_transaction), + .binder_transfer_binder = + LIST_HEAD_INIT(security_hook_heads.binder_transfer_binder), + .binder_transfer_file = + LIST_HEAD_INIT(security_hook_heads.binder_transfer_file), + + .ptrace_access_check = + LIST_HEAD_INIT(security_hook_heads.ptrace_access_check), + .ptrace_traceme = + LIST_HEAD_INIT(security_hook_heads.ptrace_traceme), + .capget = LIST_HEAD_INIT(security_hook_heads.capget), + .capset = LIST_HEAD_INIT(security_hook_heads.capset), + .capable = LIST_HEAD_INIT(security_hook_heads.capable), + .quotactl = LIST_HEAD_INIT(security_hook_heads.quotactl), + .quota_on = LIST_HEAD_INIT(security_hook_heads.quota_on), + .syslog = LIST_HEAD_INIT(security_hook_heads.syslog), + .settime = LIST_HEAD_INIT(security_hook_heads.settime), + .vm_enough_memory = + LIST_HEAD_INIT(security_hook_heads.vm_enough_memory), + .bprm_set_creds = + LIST_HEAD_INIT(security_hook_heads.bprm_set_creds), + .bprm_check_security = + LIST_HEAD_INIT(security_hook_heads.bprm_check_security), + .bprm_secureexec = + LIST_HEAD_INIT(security_hook_heads.bprm_secureexec), + .bprm_committing_creds = + LIST_HEAD_INIT(security_hook_heads.bprm_committing_creds), + .bprm_committed_creds = + LIST_HEAD_INIT(security_hook_heads.bprm_committed_creds), + .sb_alloc_security = + LIST_HEAD_INIT(security_hook_heads.sb_alloc_security), + .sb_free_security = + LIST_HEAD_INIT(security_hook_heads.sb_free_security), + .sb_copy_data = LIST_HEAD_INIT(security_hook_heads.sb_copy_data), + .sb_remount = LIST_HEAD_INIT(security_hook_heads.sb_remount), + .sb_kern_mount = + LIST_HEAD_INIT(security_hook_heads.sb_kern_mount), + .sb_show_options = + LIST_HEAD_INIT(security_hook_heads.sb_show_options), + .sb_statfs = LIST_HEAD_INIT(security_hook_heads.sb_statfs), + .sb_mount = LIST_HEAD_INIT(security_hook_heads.sb_mount), + .sb_umount = LIST_HEAD_INIT(security_hook_heads.sb_umount), + .sb_pivotroot = LIST_HEAD_INIT(security_hook_heads.sb_pivotroot), + .sb_set_mnt_opts = + LIST_HEAD_INIT(security_hook_heads.sb_set_mnt_opts), + .sb_clone_mnt_opts = + LIST_HEAD_INIT(security_hook_heads.sb_clone_mnt_opts), + .sb_parse_opts_str = + LIST_HEAD_INIT(security_hook_heads.sb_parse_opts_str), + .dentry_init_security = + LIST_HEAD_INIT(security_hook_heads.dentry_init_security), +#ifdef CONFIG_SECURITY_PATH + .path_unlink = LIST_HEAD_INIT(security_hook_heads.path_unlink), + .path_mkdir = LIST_HEAD_INIT(security_hook_heads.path_mkdir), + .path_rmdir = LIST_HEAD_INIT(security_hook_heads.path_rmdir), + .path_mknod = LIST_HEAD_INIT(security_hook_heads.path_mknod), + .path_truncate = + LIST_HEAD_INIT(security_hook_heads.path_truncate), + .path_symlink = LIST_HEAD_INIT(security_hook_heads.path_symlink), + .path_link = LIST_HEAD_INIT(security_hook_heads.path_link), + .path_rename = LIST_HEAD_INIT(security_hook_heads.path_rename), + .path_chmod = LIST_HEAD_INIT(security_hook_heads.path_chmod), + .path_chown = LIST_HEAD_INIT(security_hook_heads.path_chown), + .path_chroot = LIST_HEAD_INIT(security_hook_heads.path_chroot), +#endif + .inode_alloc_security = + LIST_HEAD_INIT(security_hook_heads.inode_alloc_security), + .inode_free_security = + LIST_HEAD_INIT(security_hook_heads.inode_free_security), + .inode_init_security = + LIST_HEAD_INIT(security_hook_heads.inode_init_security), + .inode_create = LIST_HEAD_INIT(security_hook_heads.inode_create), + .inode_link = LIST_HEAD_INIT(security_hook_heads.inode_link), + .inode_unlink = LIST_HEAD_INIT(security_hook_heads.inode_unlink), + .inode_symlink = + LIST_HEAD_INIT(security_hook_heads.inode_symlink), + .inode_mkdir = LIST_HEAD_INIT(security_hook_heads.inode_mkdir), + .inode_rmdir = LIST_HEAD_INIT(security_hook_heads.inode_rmdir), + .inode_mknod = LIST_HEAD_INIT(security_hook_heads.inode_mknod), + .inode_rename = LIST_HEAD_INIT(security_hook_heads.inode_rename), + .inode_readlink = + LIST_HEAD_INIT(security_hook_heads.inode_readlink), + .inode_follow_link = + LIST_HEAD_INIT(security_hook_heads.inode_follow_link), + .inode_permission = + LIST_HEAD_INIT(security_hook_heads.inode_permission), + .inode_setattr = + LIST_HEAD_INIT(security_hook_heads.inode_setattr), + .inode_getattr = + LIST_HEAD_INIT(security_hook_heads.inode_getattr), + .inode_setxattr = + LIST_HEAD_INIT(security_hook_heads.inode_setxattr), + .inode_post_setxattr = + LIST_HEAD_INIT(security_hook_heads.inode_post_setxattr), + .inode_getxattr = + LIST_HEAD_INIT(security_hook_heads.inode_getxattr), + .inode_listxattr = + LIST_HEAD_INIT(security_hook_heads.inode_listxattr), + .inode_removexattr = + LIST_HEAD_INIT(security_hook_heads.inode_removexattr), + .inode_need_killpriv = + LIST_HEAD_INIT(security_hook_heads.inode_need_killpriv), + .inode_killpriv = + LIST_HEAD_INIT(security_hook_heads.inode_killpriv), + .inode_getsecurity = + LIST_HEAD_INIT(security_hook_heads.inode_getsecurity), + .inode_setsecurity = + LIST_HEAD_INIT(security_hook_heads.inode_setsecurity), + .inode_listsecurity = + LIST_HEAD_INIT(security_hook_heads.inode_listsecurity), + .inode_getsecid = + LIST_HEAD_INIT(security_hook_heads.inode_getsecid), + .file_permission = + LIST_HEAD_INIT(security_hook_heads.file_permission), + .file_alloc_security = + LIST_HEAD_INIT(security_hook_heads.file_alloc_security), + .file_free_security = + LIST_HEAD_INIT(security_hook_heads.file_free_security), + .file_ioctl = LIST_HEAD_INIT(security_hook_heads.file_ioctl), + .mmap_addr = LIST_HEAD_INIT(security_hook_heads.mmap_addr), + .mmap_file = LIST_HEAD_INIT(security_hook_heads.mmap_file), + .file_mprotect = + LIST_HEAD_INIT(security_hook_heads.file_mprotect), + .file_lock = LIST_HEAD_INIT(security_hook_heads.file_lock), + .file_fcntl = LIST_HEAD_INIT(security_hook_heads.file_fcntl), + .file_set_fowner = + LIST_HEAD_INIT(security_hook_heads.file_set_fowner), + .file_send_sigiotask = + LIST_HEAD_INIT(security_hook_heads.file_send_sigiotask), + .file_receive = LIST_HEAD_INIT(security_hook_heads.file_receive), + .file_open = LIST_HEAD_INIT(security_hook_heads.file_open), + .task_create = LIST_HEAD_INIT(security_hook_heads.task_create), + .task_free = LIST_HEAD_INIT(security_hook_heads.task_free), + .cred_alloc_blank = + LIST_HEAD_INIT(security_hook_heads.cred_alloc_blank), + .cred_free = LIST_HEAD_INIT(security_hook_heads.cred_free), + .cred_prepare = LIST_HEAD_INIT(security_hook_heads.cred_prepare), + .cred_transfer = + LIST_HEAD_INIT(security_hook_heads.cred_transfer), + .kernel_act_as = + LIST_HEAD_INIT(security_hook_heads.kernel_act_as), + .kernel_create_files_as = + LIST_HEAD_INIT(security_hook_heads.kernel_create_files_as), + .kernel_fw_from_file = + LIST_HEAD_INIT(security_hook_heads.kernel_fw_from_file), + .kernel_module_request = + LIST_HEAD_INIT(security_hook_heads.kernel_module_request), + .kernel_module_from_file = + LIST_HEAD_INIT(security_hook_heads.kernel_module_from_file), + .task_fix_setuid = + LIST_HEAD_INIT(security_hook_heads.task_fix_setuid), + .task_setpgid = LIST_HEAD_INIT(security_hook_heads.task_setpgid), + .task_getpgid = LIST_HEAD_INIT(security_hook_heads.task_getpgid), + .task_getsid = LIST_HEAD_INIT(security_hook_heads.task_getsid), + .task_getsecid = + LIST_HEAD_INIT(security_hook_heads.task_getsecid), + .task_setnice = LIST_HEAD_INIT(security_hook_heads.task_setnice), + .task_setioprio = + LIST_HEAD_INIT(security_hook_heads.task_setioprio), + .task_getioprio = + LIST_HEAD_INIT(security_hook_heads.task_getioprio), + .task_setrlimit = + LIST_HEAD_INIT(security_hook_heads.task_setrlimit), + .task_setscheduler = + LIST_HEAD_INIT(security_hook_heads.task_setscheduler), + .task_getscheduler = + LIST_HEAD_INIT(security_hook_heads.task_getscheduler), + .task_movememory = + LIST_HEAD_INIT(security_hook_heads.task_movememory), + .task_kill = LIST_HEAD_INIT(security_hook_heads.task_kill), + .task_wait = LIST_HEAD_INIT(security_hook_heads.task_wait), + .task_prctl = LIST_HEAD_INIT(security_hook_heads.task_prctl), + .task_to_inode = + LIST_HEAD_INIT(security_hook_heads.task_to_inode), + .ipc_permission = + LIST_HEAD_INIT(security_hook_heads.ipc_permission), + .ipc_getsecid = LIST_HEAD_INIT(security_hook_heads.ipc_getsecid), + .msg_msg_alloc_security = + LIST_HEAD_INIT(security_hook_heads.msg_msg_alloc_security), + .msg_msg_free_security = + LIST_HEAD_INIT(security_hook_heads.msg_msg_free_security), + .msg_queue_alloc_security = + LIST_HEAD_INIT(security_hook_heads.msg_queue_alloc_security), + .msg_queue_free_security = + LIST_HEAD_INIT(security_hook_heads.msg_queue_free_security), + .msg_queue_associate = + LIST_HEAD_INIT(security_hook_heads.msg_queue_associate), + .msg_queue_msgctl = + LIST_HEAD_INIT(security_hook_heads.msg_queue_msgctl), + .msg_queue_msgsnd = + LIST_HEAD_INIT(security_hook_heads.msg_queue_msgsnd), + .msg_queue_msgrcv = + LIST_HEAD_INIT(security_hook_heads.msg_queue_msgrcv), + .shm_alloc_security = + LIST_HEAD_INIT(security_hook_heads.shm_alloc_security), + .shm_free_security = + LIST_HEAD_INIT(security_hook_heads.shm_free_security), + .shm_associate = + LIST_HEAD_INIT(security_hook_heads.shm_associate), + .shm_shmctl = LIST_HEAD_INIT(security_hook_heads.shm_shmctl), + .shm_shmat = LIST_HEAD_INIT(security_hook_heads.shm_shmat), + .sem_alloc_security = + LIST_HEAD_INIT(security_hook_heads.sem_alloc_security), + .sem_free_security = + LIST_HEAD_INIT(security_hook_heads.sem_free_security), + .sem_associate = + LIST_HEAD_INIT(security_hook_heads.sem_associate), + .sem_semctl = LIST_HEAD_INIT(security_hook_heads.sem_semctl), + .sem_semop = LIST_HEAD_INIT(security_hook_heads.sem_semop), + .netlink_send = LIST_HEAD_INIT(security_hook_heads.netlink_send), + .d_instantiate = + LIST_HEAD_INIT(security_hook_heads.d_instantiate), + .getprocattr = LIST_HEAD_INIT(security_hook_heads.getprocattr), + .setprocattr = LIST_HEAD_INIT(security_hook_heads.setprocattr), + .ismaclabel = LIST_HEAD_INIT(security_hook_heads.ismaclabel), + .secid_to_secctx = + LIST_HEAD_INIT(security_hook_heads.secid_to_secctx), + .secctx_to_secid = + LIST_HEAD_INIT(security_hook_heads.secctx_to_secid), + .release_secctx = + LIST_HEAD_INIT(security_hook_heads.release_secctx), + .inode_notifysecctx = + LIST_HEAD_INIT(security_hook_heads.inode_notifysecctx), + .inode_setsecctx = + LIST_HEAD_INIT(security_hook_heads.inode_setsecctx), + .inode_getsecctx = + LIST_HEAD_INIT(security_hook_heads.inode_getsecctx), +#ifdef CONFIG_SECURITY_NETWORK + .unix_stream_connect = + LIST_HEAD_INIT(security_hook_heads.unix_stream_connect), + .unix_may_send = + LIST_HEAD_INIT(security_hook_heads.unix_may_send), + .socket_create = + LIST_HEAD_INIT(security_hook_heads.socket_create), + .socket_post_create = + LIST_HEAD_INIT(security_hook_heads.socket_post_create), + .socket_bind = LIST_HEAD_INIT(security_hook_heads.socket_bind), + .socket_connect = + LIST_HEAD_INIT(security_hook_heads.socket_connect), + .socket_listen = + LIST_HEAD_INIT(security_hook_heads.socket_listen), + .socket_accept = + LIST_HEAD_INIT(security_hook_heads.socket_accept), + .socket_sendmsg = + LIST_HEAD_INIT(security_hook_heads.socket_sendmsg), + .socket_recvmsg = + LIST_HEAD_INIT(security_hook_heads.socket_recvmsg), + .socket_getsockname = + LIST_HEAD_INIT(security_hook_heads.socket_getsockname), + .socket_getpeername = + LIST_HEAD_INIT(security_hook_heads.socket_getpeername), + .socket_getsockopt = + LIST_HEAD_INIT(security_hook_heads.socket_getsockopt), + .socket_setsockopt = + LIST_HEAD_INIT(security_hook_heads.socket_setsockopt), + .socket_shutdown = + LIST_HEAD_INIT(security_hook_heads.socket_shutdown), + .socket_sock_rcv_skb = + LIST_HEAD_INIT(security_hook_heads.socket_sock_rcv_skb), + .socket_getpeersec_stream = + LIST_HEAD_INIT(security_hook_heads.socket_getpeersec_stream), + .socket_getpeersec_dgram = + LIST_HEAD_INIT(security_hook_heads.socket_getpeersec_dgram), + .sk_alloc_security = + LIST_HEAD_INIT(security_hook_heads.sk_alloc_security), + .sk_free_security = + LIST_HEAD_INIT(security_hook_heads.sk_free_security), + .sk_clone_security = + LIST_HEAD_INIT(security_hook_heads.sk_clone_security), + .sk_getsecid = LIST_HEAD_INIT(security_hook_heads.sk_getsecid), + .sock_graft = LIST_HEAD_INIT(security_hook_heads.sock_graft), + .inet_conn_request = + LIST_HEAD_INIT(security_hook_heads.inet_conn_request), + .inet_csk_clone = + LIST_HEAD_INIT(security_hook_heads.inet_csk_clone), + .inet_conn_established = + LIST_HEAD_INIT(security_hook_heads.inet_conn_established), + .secmark_relabel_packet = + LIST_HEAD_INIT(security_hook_heads.secmark_relabel_packet), + .secmark_refcount_inc = + LIST_HEAD_INIT(security_hook_heads.secmark_refcount_inc), + .secmark_refcount_dec = + LIST_HEAD_INIT(security_hook_heads.secmark_refcount_dec), + .req_classify_flow = + LIST_HEAD_INIT(security_hook_heads.req_classify_flow), + .tun_dev_alloc_security = + LIST_HEAD_INIT(security_hook_heads.tun_dev_alloc_security), + .tun_dev_free_security = + LIST_HEAD_INIT(security_hook_heads.tun_dev_free_security), + .tun_dev_create = + LIST_HEAD_INIT(security_hook_heads.tun_dev_create), + .tun_dev_attach_queue = + LIST_HEAD_INIT(security_hook_heads.tun_dev_attach_queue), + .tun_dev_attach = + LIST_HEAD_INIT(security_hook_heads.tun_dev_attach), + .tun_dev_open = LIST_HEAD_INIT(security_hook_heads.tun_dev_open), + .skb_owned_by = LIST_HEAD_INIT(security_hook_heads.skb_owned_by), +#endif /* CONFIG_SECURITY_NETWORK */ +#ifdef CONFIG_SECURITY_NETWORK_XFRM + .xfrm_policy_alloc_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_policy_alloc_security), + .xfrm_policy_clone_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_policy_clone_security), + .xfrm_policy_free_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_policy_free_security), + .xfrm_policy_delete_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_policy_delete_security), + .xfrm_state_alloc = + LIST_HEAD_INIT(security_hook_heads.xfrm_state_alloc), + .xfrm_state_alloc_acquire = + LIST_HEAD_INIT(security_hook_heads.xfrm_state_alloc_acquire), + .xfrm_state_free_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_state_free_security), + .xfrm_state_delete_security = + LIST_HEAD_INIT(security_hook_heads.xfrm_state_delete_security), + .xfrm_policy_lookup = + LIST_HEAD_INIT(security_hook_heads.xfrm_policy_lookup), + .xfrm_state_pol_flow_match = + LIST_HEAD_INIT(security_hook_heads.xfrm_state_pol_flow_match), + .xfrm_decode_session = + LIST_HEAD_INIT(security_hook_heads.xfrm_decode_session), +#endif /* CONFIG_SECURITY_NETWORK_XFRM */ +#ifdef CONFIG_KEYS + .key_alloc = LIST_HEAD_INIT(security_hook_heads.key_alloc), + .key_free = LIST_HEAD_INIT(security_hook_heads.key_free), + .key_permission = + LIST_HEAD_INIT(security_hook_heads.key_permission), + .key_getsecurity = + LIST_HEAD_INIT(security_hook_heads.key_getsecurity), +#endif /* CONFIG_KEYS */ +#ifdef CONFIG_AUDIT + .audit_rule_init = + LIST_HEAD_INIT(security_hook_heads.audit_rule_init), + .audit_rule_known = + LIST_HEAD_INIT(security_hook_heads.audit_rule_known), + .audit_rule_match = + LIST_HEAD_INIT(security_hook_heads.audit_rule_match), + .audit_rule_free = + LIST_HEAD_INIT(security_hook_heads.audit_rule_free), #endif /* CONFIG_AUDIT */ +}; diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 0cf105f346d4..06c9dd962c3c 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1990,12 +1990,6 @@ static int selinux_binder_transfer_file(struct task_struct *from, static int selinux_ptrace_access_check(struct task_struct *child, unsigned int mode) { - int rc; - - rc = cap_ptrace_access_check(child, mode); - if (rc) - return rc; - if (mode & PTRACE_MODE_READ) { u32 sid = current_sid(); u32 csid = task_sid(child); @@ -2007,25 +2001,13 @@ static int selinux_ptrace_access_check(struct task_struct *child, static int selinux_ptrace_traceme(struct task_struct *parent) { - int rc; - - rc = cap_ptrace_traceme(parent); - if (rc) - return rc; - return task_has_perm(parent, current, PROCESS__PTRACE); } static int selinux_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted) { - int error; - - error = current_has_perm(target, PROCESS__GETCAP); - if (error) - return error; - - return cap_capget(target, effective, inheritable, permitted); + return current_has_perm(target, PROCESS__GETCAP); } static int selinux_capset(struct cred *new, const struct cred *old, @@ -2033,13 +2015,6 @@ static int selinux_capset(struct cred *new, const struct cred *old, const kernel_cap_t *inheritable, const kernel_cap_t *permitted) { - int error; - - error = cap_capset(new, old, - effective, inheritable, permitted); - if (error) - return error; - return cred_has_perm(old, new, PROCESS__SETCAP); } @@ -2056,12 +2031,6 @@ static int selinux_capset(struct cred *new, const struct cred *old, static int selinux_capable(const struct cred *cred, struct user_namespace *ns, int cap, int audit) { - int rc; - - rc = cap_capable(cred, ns, cap, audit); - if (rc) - return rc; - return cred_has_capability(cred, cap, audit); } @@ -2139,12 +2108,12 @@ static int selinux_vm_enough_memory(struct mm_struct *mm, long pages) { int rc, cap_sys_admin = 0; - rc = selinux_capable(current_cred(), &init_user_ns, CAP_SYS_ADMIN, - SECURITY_CAP_NOAUDIT); + rc = cred_has_capability(current_cred(), CAP_SYS_ADMIN, + SECURITY_CAP_NOAUDIT); if (rc == 0) cap_sys_admin = 1; - return __vm_enough_memory(mm, pages, cap_sys_admin); + return cap_sys_admin; } /* binprm security operations */ @@ -2193,10 +2162,6 @@ static int selinux_bprm_set_creds(struct linux_binprm *bprm) struct inode *inode = file_inode(bprm->file); int rc; - rc = cap_bprm_set_creds(bprm); - if (rc) - return rc; - /* SELinux context only depends on initial program or script and not * the script interpreter */ if (bprm->cred_prepared) @@ -2320,7 +2285,7 @@ static int selinux_bprm_secureexec(struct linux_binprm *bprm) PROCESS__NOATSECURE, NULL); } - return (atsecure || cap_bprm_secureexec(bprm)); + return !!atsecure; } static int match_file(const void *p, struct file *file, unsigned fd) @@ -3132,8 +3097,11 @@ static int selinux_inode_getsecurity(const struct inode *inode, const char *name * and lack of permission just means that we fall back to the * in-core context value, not a denial. */ - error = selinux_capable(current_cred(), &init_user_ns, CAP_MAC_ADMIN, - SECURITY_CAP_NOAUDIT); + error = cap_capable(current_cred(), &init_user_ns, CAP_MAC_ADMIN, + SECURITY_CAP_NOAUDIT); + if (!error) + error = cred_has_capability(current_cred(), CAP_MAC_ADMIN, + SECURITY_CAP_NOAUDIT); if (!error) error = security_sid_to_context_force(isec->sid, &context, &size); @@ -3318,12 +3286,7 @@ error: static int selinux_mmap_addr(unsigned long addr) { - int rc; - - /* do DAC check on address space usage */ - rc = cap_mmap_addr(addr); - if (rc) - return rc; + int rc = 0; if (addr < CONFIG_LSM_MMAP_MIN_ADDR) { u32 sid = current_sid(); @@ -3639,23 +3602,11 @@ static void selinux_task_getsecid(struct task_struct *p, u32 *secid) static int selinux_task_setnice(struct task_struct *p, int nice) { - int rc; - - rc = cap_task_setnice(p, nice); - if (rc) - return rc; - return current_has_perm(p, PROCESS__SETSCHED); } static int selinux_task_setioprio(struct task_struct *p, int ioprio) { - int rc; - - rc = cap_task_setioprio(p, ioprio); - if (rc) - return rc; - return current_has_perm(p, PROCESS__SETSCHED); } @@ -3681,12 +3632,6 @@ static int selinux_task_setrlimit(struct task_struct *p, unsigned int resource, static int selinux_task_setscheduler(struct task_struct *p) { - int rc; - - rc = cap_task_setscheduler(p); - if (rc) - return rc; - return current_has_perm(p, PROCESS__SETSCHED); } @@ -5097,12 +5042,6 @@ static unsigned int selinux_ipv6_postroute(const struct nf_hook_ops *ops, static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb) { - int err; - - err = cap_netlink_send(sk, skb); - if (err) - return err; - return selinux_nlmsg_perm(sk, skb); } @@ -5840,9 +5779,7 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer) #endif -static struct security_operations selinux_ops = { - LSM_HOOK_INIT(name, "selinux"), - +static struct security_hook_list selinux_hooks[] = { LSM_HOOK_INIT(binder_set_context_mgr, selinux_binder_set_context_mgr), LSM_HOOK_INIT(binder_transaction, selinux_binder_transaction), LSM_HOOK_INIT(binder_transfer_binder, selinux_binder_transfer_binder), @@ -6055,7 +5992,7 @@ static struct security_operations selinux_ops = { static __init int selinux_init(void) { - if (!security_module_enable(&selinux_ops)) { + if (!security_module_enable("selinux")) { selinux_enabled = 0; return 0; } @@ -6077,8 +6014,7 @@ static __init int selinux_init(void) 0, SLAB_PANIC, NULL); avc_init(); - if (register_security(&selinux_ops)) - panic("SELinux: Unable to register with kernel.\n"); + security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks)); if (avc_add_callback(selinux_netcache_avc_callback, AVC_CALLBACK_RESET)) panic("SELinux: Unable to register AVC netcache callback\n"); @@ -6206,7 +6142,7 @@ int selinux_disable(void) selinux_disabled = 1; selinux_enabled = 0; - reset_security_ops(); + security_delete_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks)); /* Try to destroy the avc node cache */ avc_disable(); diff --git a/security/smack/smack.h b/security/smack/smack.h index 262dad8dfbc6..b8c1a869d85e 100644 --- a/security/smack/smack.h +++ b/security/smack/smack.h @@ -276,8 +276,6 @@ extern struct mutex smack_known_lock; extern struct list_head smack_known_list; extern struct list_head smk_netlbladdr_list; -extern struct security_operations smack_ops; - #define SMACK_HASH_SLOTS 16 extern struct hlist_head smack_known_hash[SMACK_HASH_SLOTS]; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 4313bf44c3f0..5eae42c8d0d5 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -436,17 +436,11 @@ static int smk_ptrace_rule_check(struct task_struct *tracer, */ static int smack_ptrace_access_check(struct task_struct *ctp, unsigned int mode) { - int rc; struct smack_known *skp; - rc = cap_ptrace_access_check(ctp, mode); - if (rc != 0) - return rc; - skp = smk_of_task_struct(ctp); - rc = smk_ptrace_rule_check(current, skp, mode, __func__); - return rc; + return smk_ptrace_rule_check(current, skp, mode, __func__); } /** @@ -462,10 +456,6 @@ static int smack_ptrace_traceme(struct task_struct *ptp) int rc; struct smack_known *skp; - rc = cap_ptrace_traceme(ptp); - if (rc != 0) - return rc; - skp = smk_of_task(current_security()); rc = smk_ptrace_rule_check(ptp, skp, PTRACE_MODE_ATTACH, __func__); @@ -721,10 +711,6 @@ static int smack_bprm_set_creds(struct linux_binprm *bprm) struct inode_smack *isp; int rc; - rc = cap_bprm_set_creds(bprm); - if (rc != 0) - return rc; - if (bprm->cred_prepared) return 0; @@ -779,12 +765,11 @@ static void smack_bprm_committing_creds(struct linux_binprm *bprm) static int smack_bprm_secureexec(struct linux_binprm *bprm) { struct task_smack *tsp = current_security(); - int ret = cap_bprm_secureexec(bprm); - if (!ret && (tsp->smk_task != tsp->smk_forked)) - ret = 1; + if (tsp->smk_task != tsp->smk_forked) + return 1; - return ret; + return 0; } /* @@ -1934,12 +1919,7 @@ static void smack_task_getsecid(struct task_struct *p, u32 *secid) */ static int smack_task_setnice(struct task_struct *p, int nice) { - int rc; - - rc = cap_task_setnice(p, nice); - if (rc == 0) - rc = smk_curacc_on_task(p, MAY_WRITE, __func__); - return rc; + return smk_curacc_on_task(p, MAY_WRITE, __func__); } /** @@ -1951,12 +1931,7 @@ static int smack_task_setnice(struct task_struct *p, int nice) */ static int smack_task_setioprio(struct task_struct *p, int ioprio) { - int rc; - - rc = cap_task_setioprio(p, ioprio); - if (rc == 0) - rc = smk_curacc_on_task(p, MAY_WRITE, __func__); - return rc; + return smk_curacc_on_task(p, MAY_WRITE, __func__); } /** @@ -1980,12 +1955,7 @@ static int smack_task_getioprio(struct task_struct *p) */ static int smack_task_setscheduler(struct task_struct *p) { - int rc; - - rc = cap_task_setscheduler(p); - if (rc == 0) - rc = smk_curacc_on_task(p, MAY_WRITE, __func__); - return rc; + return smk_curacc_on_task(p, MAY_WRITE, __func__); } /** @@ -4266,9 +4236,7 @@ static int smack_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen) return 0; } -struct security_operations smack_ops = { - LSM_HOOK_INIT(name, "smack"), - +struct security_hook_list smack_hooks[] = { LSM_HOOK_INIT(ptrace_access_check, smack_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, smack_ptrace_traceme), LSM_HOOK_INIT(syslog, smack_syslog), @@ -4451,7 +4419,7 @@ static __init int smack_init(void) struct cred *cred; struct task_smack *tsp; - if (!security_module_enable(&smack_ops)) + if (!security_module_enable("smack")) return 0; smack_enabled = 1; @@ -4481,8 +4449,7 @@ static __init int smack_init(void) /* * Register with LSM */ - if (register_security(&smack_ops)) - panic("smack: Unable to register with kernel.\n"); + security_add_hooks(smack_hooks, ARRAY_SIZE(smack_hooks)); return 0; } diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index d9682985349e..4aa12c8d3c63 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -2547,7 +2547,7 @@ static int __init init_smk_fs(void) int err; int rc; - if (!security_module_enable(&smack_ops)) + if (!security_module_enable("smack")) return 0; err = smk_init_sysfs(); diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index bce13583efda..cbf3df422c87 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -72,12 +72,6 @@ static void tomoyo_cred_free(struct cred *cred) */ static int tomoyo_bprm_set_creds(struct linux_binprm *bprm) { - int rc; - - rc = cap_bprm_set_creds(bprm); - if (rc) - return rc; - /* * Do only if this function is called for the first time of an execve * operation. @@ -502,8 +496,7 @@ static int tomoyo_socket_sendmsg(struct socket *sock, struct msghdr *msg, * tomoyo_security_ops is a "struct security_operations" which is used for * registering TOMOYO. */ -static struct security_operations tomoyo_security_ops = { - LSM_HOOK_INIT(name, "tomoyo"), +static struct security_hook_list tomoyo_hooks[] = { LSM_HOOK_INIT(cred_alloc_blank, tomoyo_cred_alloc_blank), LSM_HOOK_INIT(cred_prepare, tomoyo_cred_prepare), LSM_HOOK_INIT(cred_transfer, tomoyo_cred_transfer), @@ -546,11 +539,10 @@ static int __init tomoyo_init(void) { struct cred *cred = (struct cred *) current_cred(); - if (!security_module_enable(&tomoyo_security_ops)) + if (!security_module_enable("tomoyo")) return 0; /* register ourselves with the security framework */ - if (register_security(&tomoyo_security_ops)) - panic("Failure registering TOMOYO Linux"); + security_add_hooks(tomoyo_hooks, ARRAY_SIZE(tomoyo_hooks)); printk(KERN_INFO "TOMOYO Linux initialized\n"); cred->security = &tomoyo_kernel_domain; tomoyo_mm_init(); diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index 23dd4c6246b2..9ed32502470e 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -154,13 +154,9 @@ void yama_task_free(struct task_struct *task) int yama_task_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { - int rc; + int rc = -ENOSYS; struct task_struct *myself = current; - rc = cap_task_prctl(option, arg2, arg3, arg4, arg5); - if (rc != -ENOSYS) - return rc; - switch (option) { case PR_SET_PTRACER: /* Since a thread can call prctl(), find the group leader @@ -279,17 +275,10 @@ static int ptracer_exception_found(struct task_struct *tracer, * * Returns 0 if following the ptrace is allowed, -ve on error. */ -int yama_ptrace_access_check(struct task_struct *child, +static int yama_ptrace_access_check(struct task_struct *child, unsigned int mode) { - int rc; - - /* If standard caps disallows it, so does Yama. We should - * only tighten restrictions further. - */ - rc = cap_ptrace_access_check(child, mode); - if (rc) - return rc; + int rc = 0; /* require ptrace target be a child of ptracer on attach */ if (mode == PTRACE_MODE_ATTACH) { @@ -335,14 +324,7 @@ int yama_ptrace_access_check(struct task_struct *child, */ int yama_ptrace_traceme(struct task_struct *parent) { - int rc; - - /* If standard caps disallows it, so does Yama. We should - * only tighten restrictions further. - */ - rc = cap_ptrace_traceme(parent); - if (rc) - return rc; + int rc = 0; /* Only disallow PTRACE_TRACEME on more aggressive settings. */ switch (ptrace_scope) { @@ -364,16 +346,17 @@ int yama_ptrace_traceme(struct task_struct *parent) return rc; } -#ifndef CONFIG_SECURITY_YAMA_STACKED -static struct security_operations yama_ops = { - LSM_HOOK_INIT(name, "yama"), - +static struct security_hook_list yama_hooks[] = { LSM_HOOK_INIT(ptrace_access_check, yama_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, yama_ptrace_traceme), LSM_HOOK_INIT(task_prctl, yama_task_prctl), LSM_HOOK_INIT(task_free, yama_task_free), }; -#endif + +void __init yama_add_hooks(void) +{ + security_add_hooks(yama_hooks, ARRAY_SIZE(yama_hooks)); +} #ifdef CONFIG_SYSCTL static int yama_dointvec_minmax(struct ctl_table *table, int write, @@ -418,16 +401,13 @@ static struct ctl_table yama_sysctl_table[] = { static __init int yama_init(void) { #ifndef CONFIG_SECURITY_YAMA_STACKED - if (!security_module_enable(&yama_ops)) + /* + * If yama is being stacked this is already taken care of. + */ + if (!security_module_enable("yama")) return 0; #endif - - printk(KERN_INFO "Yama: becoming mindful.\n"); - -#ifndef CONFIG_SECURITY_YAMA_STACKED - if (register_security(&yama_ops)) - panic("Yama: kernel registration failed.\n"); -#endif + pr_info("Yama: becoming mindful.\n"); #ifdef CONFIG_SYSCTL if (!register_sysctl_paths(yama_sysctl_path, yama_sysctl_table)) -- cgit v1.2.3 From dc199241624a2fd85d9b0d8303babd60feadd0e6 Mon Sep 17 00:00:00 2001 From: Peter Seiderer Date: Mon, 4 May 2015 07:51:05 -0300 Subject: [media] videodev2: Add V4L2_BUF_FLAG_LAST This v4l2_buffer flag can be used by drivers to mark a capture buffer as the last generated buffer, for example after a V4L2_DEC_CMD_STOP command was issued. Signed-off-by: Peter Seiderer Signed-off-by: Philipp Zabel Acked-by: Hans Verkuil Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- include/trace/events/v4l2.h | 3 ++- include/uapi/linux/videodev2.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/trace/events/v4l2.h b/include/trace/events/v4l2.h index 20112170ff11..89d0497c058a 100644 --- a/include/trace/events/v4l2.h +++ b/include/trace/events/v4l2.h @@ -83,7 +83,8 @@ SHOW_FIELD { V4L2_BUF_FLAG_TIMESTAMP_MASK, "TIMESTAMP_MASK" }, \ { V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN, "TIMESTAMP_UNKNOWN" }, \ { V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC, "TIMESTAMP_MONOTONIC" }, \ - { V4L2_BUF_FLAG_TIMESTAMP_COPY, "TIMESTAMP_COPY" }) + { V4L2_BUF_FLAG_TIMESTAMP_COPY, "TIMESTAMP_COPY" }, \ + { V4L2_BUF_FLAG_LAST, "LAST" }) #define show_timecode_flags(flags) \ __print_flags(flags, "|", \ diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index fa376f7666ba..0f5a4673f3e4 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -810,6 +810,8 @@ struct v4l2_buffer { #define V4L2_BUF_FLAG_TSTAMP_SRC_MASK 0x00070000 #define V4L2_BUF_FLAG_TSTAMP_SRC_EOF 0x00000000 #define V4L2_BUF_FLAG_TSTAMP_SRC_SOE 0x00010000 +/* mem2mem encoder/decoder */ +#define V4L2_BUF_FLAG_LAST 0x00100000 /** * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor -- cgit v1.2.3 From c16218402a000bb25c1277c43ae98c11bcb59bd1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 4 May 2015 07:51:06 -0300 Subject: [media] videobuf2: return -EPIPE from DQBUF after the last buffer If the last buffer was dequeued from a capture queue, let poll return immediately and let DQBUF return -EPIPE to signal there will no more buffers to dequeue until STREAMOFF. The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST. To reenable dequeuing on the capture queue, the driver must explicitly call vb2_clear_last_buffer_queued. The last buffer queued flag is cleared automatically during STREAMOFF. Signed-off-by: Philipp Zabel Acked-by: Hans Verkuil Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-mem2mem.c | 10 +++++++++- drivers/media/v4l2-core/videobuf2-core.c | 19 ++++++++++++++++++- include/media/videobuf2-core.h | 13 +++++++++++++ 3 files changed, 40 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index 73824a5ada83..cbef15c07e53 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -564,8 +564,16 @@ unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, if (list_empty(&src_q->done_list)) poll_wait(file, &src_q->done_wq, wait); - if (list_empty(&dst_q->done_list)) + if (list_empty(&dst_q->done_list)) { + /* + * If the last buffer was dequeued from the capture queue, + * return immediately. DQBUF will return -EPIPE. + */ + if (dst_q->last_buffer_dequeued) + return rc | POLLIN | POLLRDNORM; + poll_wait(file, &dst_q->done_wq, wait); + } if (m2m_ctx->m2m_dev->m2m_ops->lock) m2m_ctx->m2m_dev->m2m_ops->lock(m2m_ctx->priv); diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 20cdbc0900ea..552d7e127c39 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1943,6 +1943,11 @@ static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking) return -EIO; } + if (q->last_buffer_dequeued) { + dprintk(3, "last buffer dequeued already, will not wait for buffers\n"); + return -EPIPE; + } + if (!list_empty(&q->done_list)) { /* * Found a buffer that we were waiting for. @@ -2098,6 +2103,9 @@ static int vb2_internal_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool n /* Remove from videobuf queue */ list_del(&vb->queued_entry); q->queued_count--; + if (!V4L2_TYPE_IS_OUTPUT(q->type) && + vb->v4l2_buf.flags & V4L2_BUF_FLAG_LAST) + q->last_buffer_dequeued = true; /* go back to dequeued state */ __vb2_dqbuf(vb); @@ -2311,6 +2319,7 @@ static int vb2_internal_streamoff(struct vb2_queue *q, enum v4l2_buf_type type) */ __vb2_queue_cancel(q); q->waiting_for_buffers = !V4L2_TYPE_IS_OUTPUT(q->type); + q->last_buffer_dequeued = false; dprintk(3, "successful\n"); return 0; @@ -2653,8 +2662,16 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) if (V4L2_TYPE_IS_OUTPUT(q->type) && q->queued_count < q->num_buffers) return res | POLLOUT | POLLWRNORM; - if (list_empty(&q->done_list)) + if (list_empty(&q->done_list)) { + /* + * If the last buffer was dequeued from a capture queue, + * return immediately. DQBUF will return -EPIPE. + */ + if (q->last_buffer_dequeued) + return res | POLLIN | POLLRDNORM; + poll_wait(file, &q->done_wq, wait); + } /* * Take first buffer available for dequeuing. diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index a5790fd5d125..22a44c2f5963 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -381,6 +381,9 @@ struct v4l2_fh; * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for * buffers. Only set for capture queues if qbuf has not yet been * called since poll() needs to return POLLERR in that situation. + * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the + * last decoded buffer was already dequeued. Set for capture queues + * when a buffer with the V4L2_BUF_FLAG_LAST is dequeued. * @fileio: file io emulator internal data, used only if emulator is active * @threadio: thread io internal data, used only if thread is active */ @@ -423,6 +426,7 @@ struct vb2_queue { unsigned int start_streaming_called:1; unsigned int error:1; unsigned int waiting_for_buffers:1; + unsigned int last_buffer_dequeued:1; struct vb2_fileio_data *fileio; struct vb2_threadio_data *threadio; @@ -603,6 +607,15 @@ static inline bool vb2_start_streaming_called(struct vb2_queue *q) return q->start_streaming_called; } +/** + * vb2_clear_last_buffer_dequeued() - clear last buffer dequeued flag of queue + * @q: videobuf queue + */ +static inline void vb2_clear_last_buffer_dequeued(struct vb2_queue *q) +{ + q->last_buffer_dequeued = false; +} + /* * The following functions are not part of the vb2 core API, but are simple * helper functions that you can use in your struct v4l2_file_operations, -- cgit v1.2.3 From 6bcacf51d050d412e5c302e0dd5e582212c5f7be Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Mon, 20 Apr 2015 19:22:55 +0100 Subject: drm: Add reference counting to blob properties Reference-count drm_property_blob objects, changing the API to ref/unref. Signed-off-by: Daniel Stone Reviewed-by: Maarten Lankhorst [danvet: Squash in kerneldoc fixup from Daniel Stone.] [danvet: Squash in Oops fix from Thiery Reding.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_crtc.c | 163 +++++++++++++++++++++++++++++++++++++++++---- include/drm/drm_crtc.h | 17 ++--- 2 files changed, 158 insertions(+), 22 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 3b6573527e7f..2e26988a9762 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -352,7 +352,9 @@ static struct drm_mode_object *_object_find(struct drm_device *dev, if (obj && obj->id != id) obj = NULL; /* don't leak out unref'd fb's */ - if (obj && (obj->type == DRM_MODE_OBJECT_FB)) + if (obj && + (obj->type == DRM_MODE_OBJECT_FB || + obj->type == DRM_MODE_OBJECT_BLOB)) obj = NULL; mutex_unlock(&dev->mode_config.idr_mutex); @@ -377,7 +379,7 @@ struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, /* Framebuffers are reference counted and need their own lookup * function.*/ - WARN_ON(type == DRM_MODE_OBJECT_FB); + WARN_ON(type == DRM_MODE_OBJECT_FB || type == DRM_MODE_OBJECT_BLOB); obj = _object_find(dev, id, type); return obj; } @@ -4202,7 +4204,7 @@ done: return ret; } -static struct drm_property_blob * +struct drm_property_blob * drm_property_create_blob(struct drm_device *dev, size_t length, const void *data) { @@ -4217,6 +4219,7 @@ drm_property_create_blob(struct drm_device *dev, size_t length, return NULL; blob->length = length; + blob->dev = dev; memcpy(blob->data, data, length); @@ -4229,24 +4232,146 @@ drm_property_create_blob(struct drm_device *dev, size_t length, return NULL; } + kref_init(&blob->refcount); + list_add_tail(&blob->head, &dev->mode_config.property_blob_list); mutex_unlock(&dev->mode_config.blob_lock); return blob; } +EXPORT_SYMBOL(drm_property_create_blob); -static void drm_property_destroy_blob(struct drm_device *dev, - struct drm_property_blob *blob) +/** + * drm_property_free_blob - Blob property destructor + * + * Internal free function for blob properties; must not be used directly. + * + * @param kref Reference + */ +static void drm_property_free_blob(struct kref *kref) { - mutex_lock(&dev->mode_config.blob_lock); - drm_mode_object_put(dev, &blob->base); + struct drm_property_blob *blob = + container_of(kref, struct drm_property_blob, refcount); + + WARN_ON(!mutex_is_locked(&blob->dev->mode_config.blob_lock)); + list_del(&blob->head); - mutex_unlock(&dev->mode_config.blob_lock); + drm_mode_object_put(blob->dev, &blob->base); kfree(blob); } +/** + * drm_property_unreference_blob - Unreference a blob property + * + * Drop a reference on a blob property. May free the object. + * + * @param blob Pointer to blob property + */ +void drm_property_unreference_blob(struct drm_property_blob *blob) +{ + struct drm_device *dev; + + if (!blob) + return; + + dev = blob->dev; + + DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount)); + + if (kref_put_mutex(&blob->refcount, drm_property_free_blob, + &dev->mode_config.blob_lock)) + mutex_unlock(&dev->mode_config.blob_lock); + else + might_lock(&dev->mode_config.blob_lock); + +} +EXPORT_SYMBOL(drm_property_unreference_blob); + +/** + * drm_property_unreference_blob_locked - Unreference a blob property with blob_lock held + * + * Drop a reference on a blob property. May free the object. This must be + * called with blob_lock held. + * + * @param dev Device the blob was created on + * @param blob Pointer to blob property + */ +static void drm_property_unreference_blob_locked(struct drm_property_blob *blob) +{ + if (!blob) + return; + + DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount)); + + kref_put(&blob->refcount, drm_property_free_blob); +} + +/** + * drm_property_reference_blob - Take a reference on an existing property + * + * Take a new reference on an existing blob property. + * + * @param blob Pointer to blob property + */ +struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob) +{ + DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount)); + kref_get(&blob->refcount); + return blob; +} +EXPORT_SYMBOL(drm_property_reference_blob); + +/* + * Like drm_property_lookup_blob, but does not return an additional reference. + * Must be called with blob_lock held. + */ +static struct drm_property_blob *__drm_property_lookup_blob(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *obj = NULL; + struct drm_property_blob *blob; + + WARN_ON(!mutex_is_locked(&dev->mode_config.blob_lock)); + + mutex_lock(&dev->mode_config.idr_mutex); + obj = idr_find(&dev->mode_config.crtc_idr, id); + if (!obj || (obj->type != DRM_MODE_OBJECT_BLOB) || (obj->id != id)) + blob = NULL; + else + blob = obj_to_blob(obj); + mutex_unlock(&dev->mode_config.idr_mutex); + + return blob; +} + +/** + * drm_property_lookup_blob - look up a blob property and take a reference + * @dev: drm device + * @id: id of the blob property + * + * If successful, this takes an additional reference to the blob property. + * callers need to make sure to eventually unreference the returned property + * again, using @drm_property_unreference_blob. + */ +struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, + uint32_t id) +{ + struct drm_property_blob *blob; + + mutex_lock(&dev->mode_config.blob_lock); + blob = __drm_property_lookup_blob(dev, id); + if (blob) { + if (!kref_get_unless_zero(&blob->refcount)) + blob = NULL; + } + mutex_unlock(&dev->mode_config.blob_lock); + + return blob; +} +EXPORT_SYMBOL(drm_property_lookup_blob); + /** * drm_property_replace_global_blob - atomically replace existing blob property * @dev: drm device @@ -4313,14 +4438,14 @@ static int drm_property_replace_global_blob(struct drm_device *dev, } if (old_blob) - drm_property_destroy_blob(dev, old_blob); + drm_property_unreference_blob(old_blob); *replace = new_blob; return 0; err_created: - drm_property_destroy_blob(dev, new_blob); + drm_property_unreference_blob(new_blob); return ret; } @@ -4351,7 +4476,7 @@ int drm_mode_getblob_ioctl(struct drm_device *dev, drm_modeset_lock_all(dev); mutex_lock(&dev->mode_config.blob_lock); - blob = drm_property_blob_find(dev, out_resp->blob_id); + blob = __drm_property_lookup_blob(dev, out_resp->blob_id); if (!blob) { ret = -ENOENT; goto done; @@ -4515,8 +4640,18 @@ bool drm_property_change_valid_get(struct drm_property *property, valid_mask |= (1ULL << property->values[i]); return !(value & ~valid_mask); } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) { - /* Only the driver knows */ - return true; + struct drm_property_blob *blob; + + if (value == 0) + return true; + + blob = drm_property_lookup_blob(property->dev, value); + if (blob) { + *ref = &blob->base; + return true; + } else { + return false; + } } else if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { /* a zero value for an object property translates to null: */ if (value == 0) @@ -5566,7 +5701,7 @@ void drm_mode_config_cleanup(struct drm_device *dev) list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list, head) { - drm_property_destroy_blob(dev, blob); + drm_property_unreference_blob(blob); } /* diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 55ed8f9f45be..5626191f3af0 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -216,6 +216,8 @@ struct drm_framebuffer { struct drm_property_blob { struct drm_mode_object base; + struct drm_device *dev; + struct kref refcount; struct list_head head; size_t length; unsigned char data[]; @@ -1365,6 +1367,13 @@ struct drm_property *drm_property_create_object(struct drm_device *dev, int flags, const char *name, uint32_t type); struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, const char *name); +struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, + size_t length, + const void *data); +struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, + uint32_t id); +struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob); +void drm_property_unreference_blob(struct drm_property_blob *blob); extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); extern int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name); @@ -1528,14 +1537,6 @@ static inline struct drm_property *drm_property_find(struct drm_device *dev, return mo ? obj_to_property(mo) : NULL; } -static inline struct drm_property_blob * -drm_property_blob_find(struct drm_device *dev, uint32_t id) -{ - struct drm_mode_object *mo; - mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_BLOB); - return mo ? obj_to_blob(mo) : NULL; -} - /* Plane list iterator for legacy (overlay only) planes. */ #define drm_for_each_legacy_plane(plane, planelist) \ list_for_each_entry(plane, planelist, head) \ -- cgit v1.2.3 From 45a110a1377d9f7afbbf53e351b72cf813ac426e Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 11 May 2015 13:50:30 +0100 Subject: ASoC: dapm: Add cache to speed up adding of routes Some CODECs have a significant number of DAPM routes and for each route, when it is added to the card, the entire card widget list must be searched. When adding routes it is very likely, however, that adjacent routes will require adjacent widgets. For example all the routes for a mux are likely added in a block and the sink widget will be the same each time and it is also quite likely that the source widgets are sequential located in the widget list. This patch adds a cache to the DAPM context, this cache will hold the source and sink widgets from the last call to snd_soc_dapm_add_route for that context. A small search of the widget list will be made from those points for both the sink and source. Currently this search only checks both the last widget and the one adjacent to it. On wm8280 which has approximately 500 widgets and 30000 routes (one of the largest CODECs in mainline), the number of paths that hit the cache is 24000, which significantly improves probe time. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 7 +++++++ sound/soc/soc-dapm.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 96c5e0ec81d1..b9170e2bc5ab 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -593,6 +593,10 @@ struct snd_soc_dapm_update { int val; }; +struct snd_soc_dapm_wcache { + struct snd_soc_dapm_widget *widget; +}; + /* DAPM context */ struct snd_soc_dapm_context { enum snd_soc_bias_level bias_level; @@ -614,6 +618,9 @@ struct snd_soc_dapm_context { int (*set_bias_level)(struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level); + struct snd_soc_dapm_wcache path_sink_cache; + struct snd_soc_dapm_wcache path_source_cache; + #ifdef CONFIG_DEBUG_FS struct dentry *debugfs_dapm; #endif diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 63748526d630..10fb7087c405 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -572,6 +572,35 @@ static void soc_dapm_async_complete(struct snd_soc_dapm_context *dapm) snd_soc_component_async_complete(dapm->component); } +static struct snd_soc_dapm_widget * +dapm_wcache_lookup(struct snd_soc_dapm_wcache *wcache, const char *name) +{ + struct snd_soc_dapm_widget *w = wcache->widget; + struct list_head *wlist; + const int depth = 2; + int i = 0; + + if (w) { + wlist = &w->dapm->card->widgets; + + list_for_each_entry_from(w, wlist, list) { + if (!strcmp(name, w->name)) + return w; + + if (++i == depth) + break; + } + } + + return NULL; +} + +static inline void dapm_wcache_update(struct snd_soc_dapm_wcache *wcache, + struct snd_soc_dapm_widget *w) +{ + wcache->widget = w; +} + /** * snd_soc_dapm_force_bias_level() - Sets the DAPM bias level * @dapm: The DAPM context for which to set the level @@ -2610,6 +2639,12 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, source = route->source; } + wsource = dapm_wcache_lookup(&dapm->path_source_cache, source); + wsink = dapm_wcache_lookup(&dapm->path_sink_cache, sink); + + if (wsink && wsource) + goto skip_search; + /* * find src and dest widgets over all widgets but favor a widget from * current DAPM context @@ -2650,6 +2685,10 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, return -ENODEV; } +skip_search: + dapm_wcache_update(&dapm->path_sink_cache, wsink); + dapm_wcache_update(&dapm->path_source_cache, wsource); + ret = snd_soc_dapm_add_path(dapm, wsource, wsink, route->control, route->connected); if (ret) -- cgit v1.2.3 From 755a27e7e4c817dd51ade41668b380f26026899c Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Sun, 3 May 2015 18:18:02 +0800 Subject: tracing: remove unused ftrace_output_event() prototype The prototype of ftrace_output_event was added by commit 1d6bae966e90 ("tracing: Move raw output code from macro to standalone function") but this function was not defined anywhere, and is still nowhere to be found. Link: http://lkml.kernel.org/r/1430648282-25792-1-git-send-email-nicolas.iooss_linux@m4x.org Signed-off-by: Nicolas Iooss Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index f9ecf63d47f1..65ce6de91307 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -219,9 +219,6 @@ struct ftrace_event_class { extern int ftrace_event_reg(struct ftrace_event_call *event, enum trace_reg type, void *data); -int ftrace_output_event(struct trace_iterator *iter, struct ftrace_event_call *event, - char *fmt, ...); - int ftrace_event_define_field(struct ftrace_event_call *call, char *type, int len, char *item, int offset, int field_size, int sign, int filter); -- cgit v1.2.3 From 9abdffe286c1532a54d5aee31571d3029be4026c Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Tue, 5 May 2015 14:56:15 +0530 Subject: dma-buf: add ref counting for module as exporter Add reference counting on a kernel module that exports dma-buf and implements its operations. This prevents the module from being unloaded while DMABUF file is in use. The original patch [1] was submitted by Tomasz Stanislawski, but this is a simpler way to do it. v3: call module_put() as late as possible, per gregkh's comment. v2: move owner to struct dma_buf, and use DEFINE_DMA_BUF_EXPORT_INFO macro to simplify the change. Acked-by: Greg Kroah-Hartman Signed-off-by: Sumit Semwal [1]: https://lkml.org/lkml/2012/8/8/163 --- drivers/dma-buf/dma-buf.c | 10 +++++++++- include/linux/dma-buf.h | 10 ++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index c5a9138a6a8d..63a9914e42b8 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -72,6 +73,7 @@ static int dma_buf_release(struct inode *inode, struct file *file) if (dmabuf->resv == (struct reservation_object *)&dmabuf[1]) reservation_object_fini(dmabuf->resv); + module_put(dmabuf->owner); kfree(dmabuf); return 0; } @@ -302,14 +304,20 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) return ERR_PTR(-EINVAL); } + if (!try_module_get(exp_info->owner)) + return ERR_PTR(-ENOENT); + dmabuf = kzalloc(alloc_size, GFP_KERNEL); - if (dmabuf == NULL) + if (!dmabuf) { + module_put(exp_info->owner); return ERR_PTR(-ENOMEM); + } dmabuf->priv = exp_info->priv; dmabuf->ops = exp_info->ops; dmabuf->size = exp_info->size; dmabuf->exp_name = exp_info->exp_name; + dmabuf->owner = exp_info->owner; init_waitqueue_head(&dmabuf->poll); dmabuf->cb_excl.poll = dmabuf->cb_shared.poll = &dmabuf->poll; dmabuf->cb_excl.active = dmabuf->cb_shared.active = 0; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 2f0b431b73e0..f98bd7068d55 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -115,6 +115,8 @@ struct dma_buf_ops { * @attachments: list of dma_buf_attachment that denotes all devices attached. * @ops: dma_buf_ops associated with this buffer object. * @exp_name: name of the exporter; useful for debugging. + * @owner: pointer to exporter module; used for refcounting when exporter is a + * kernel module. * @list_node: node for dma_buf accounting and debugging. * @priv: exporter specific private data for this buffer object. * @resv: reservation object linked to this dma-buf @@ -129,6 +131,7 @@ struct dma_buf { unsigned vmapping_counter; void *vmap_ptr; const char *exp_name; + struct module *owner; struct list_head list_node; void *priv; struct reservation_object *resv; @@ -164,7 +167,8 @@ struct dma_buf_attachment { /** * struct dma_buf_export_info - holds information needed to export a dma_buf - * @exp_name: name of the exporting module - useful for debugging. + * @exp_name: name of the exporter - useful for debugging. + * @owner: pointer to exporter module - used for refcounting kernel module * @ops: Attach allocator-defined dma buf ops to the new buffer * @size: Size of the buffer * @flags: mode flags for the file @@ -176,6 +180,7 @@ struct dma_buf_attachment { */ struct dma_buf_export_info { const char *exp_name; + struct module *owner; const struct dma_buf_ops *ops; size_t size; int flags; @@ -187,7 +192,8 @@ struct dma_buf_export_info { * helper macro for exporters; zeros and fills in most common values */ #define DEFINE_DMA_BUF_EXPORT_INFO(a) \ - struct dma_buf_export_info a = { .exp_name = KBUILD_MODNAME } + struct dma_buf_export_info a = { .exp_name = KBUILD_MODNAME, \ + .owner = THIS_MODULE } /** * get_dma_buf - convenience wrapper for get_file. -- cgit v1.2.3 From 4c18d3010bb722e6ab7d0b80fcf78dd6f95a5a15 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 12 May 2015 15:27:37 +0200 Subject: drm/atomic-helpers: Export drm_atomic_helper_update_legacy_modeset_state This is useful for drivers which have their own modeset infrastructure but want to reuse most of the legacy state frobbery from the helpers. i915 wants this. v2: Add header declaration. Cc: Maarten Lankhorst Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_atomic_helper.c | 23 ++++++++++++++++++++--- include/drm/drm_atomic_helper.h | 4 ++++ 2 files changed, 24 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index d414e9eea9d8..1bcd700e3baa 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -619,8 +619,22 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) } } -static void -set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state) +/** + * drm_atomic_helper_update_legacy_modeset_state - update legacy modeset state + * @dev: DRM device + * @old_state: atomic state object with old state structures + * + * This function updates all the various legacy modeset state pointers in + * connectors, encoders and crtcs. It also updates the timestamping constants + * used for precise vblank timestamps by calling + * drm_calc_timestamping_constants(). + * + * Drivers can use this for building their own atomic commit if they don't have + * a pure helper-based modeset implementation. + */ +void +drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, + struct drm_atomic_state *old_state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state; @@ -663,6 +677,7 @@ set_routing_links(struct drm_device *dev, struct drm_atomic_state *old_state) &crtc->state->adjusted_mode); } } +EXPORT_SYMBOL(drm_atomic_helper_update_legacy_modeset_state); static void crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state) @@ -741,7 +756,9 @@ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *old_state) { disable_outputs(dev, old_state); - set_routing_links(dev, old_state); + + drm_atomic_helper_update_legacy_modeset_state(dev, old_state); + crtc_set_mode(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables); diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index d665781eb542..6ee0ee5b6143 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -43,6 +43,10 @@ int drm_atomic_helper_commit(struct drm_device *dev, void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, struct drm_atomic_state *old_state); +void +drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, + struct drm_atomic_state *old_state); + void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, -- cgit v1.2.3 From 1b26a5e1932beb34c4213934d8faf02217fc40e4 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 13 May 2015 10:37:25 +0200 Subject: drm/atomic: add drm_atomic_get_existing_*_state helpers There are cases where we want to test if a given object is part of the state, but don't want to add them if they're not. Signed-off-by: Maarten Lankhorst Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_atomic.c | 18 +++++++--------- include/drm/drm_atomic.h | 50 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 6e3b78ee7d16..c6277a4a1f2f 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -203,13 +203,12 @@ struct drm_crtc_state * drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc) { - int ret, index; + int ret, index = drm_crtc_index(crtc); struct drm_crtc_state *crtc_state; - index = drm_crtc_index(crtc); - - if (state->crtc_states[index]) - return state->crtc_states[index]; + crtc_state = drm_atomic_get_existing_crtc_state(state, crtc); + if (crtc_state) + return crtc_state; ret = drm_modeset_lock(&crtc->mutex, state->acquire_ctx); if (ret) @@ -337,13 +336,12 @@ struct drm_plane_state * drm_atomic_get_plane_state(struct drm_atomic_state *state, struct drm_plane *plane) { - int ret, index; + int ret, index = drm_plane_index(plane); struct drm_plane_state *plane_state; - index = drm_plane_index(plane); - - if (state->plane_states[index]) - return state->plane_states[index]; + plane_state = drm_atomic_get_existing_plane_state(state, plane); + if (plane_state) + return plane_state; ret = drm_modeset_lock(&plane->mutex, state->acquire_ctx); if (ret) diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index c157103492b0..d78543067700 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -54,6 +54,56 @@ int drm_atomic_connector_set_property(struct drm_connector *connector, struct drm_connector_state *state, struct drm_property *property, uint64_t val); +/** + * drm_atomic_get_existing_crtc_state - get crtc state, if it exists + * @state: global atomic state object + * @crtc: crtc to grab + * + * This function returns the crtc state for the given crtc, or NULL + * if the crtc is not part of the global atomic state. + */ +static inline struct drm_crtc_state * +drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state, + struct drm_crtc *crtc) +{ + return state->crtc_states[drm_crtc_index(crtc)]; +} + +/** + * drm_atomic_get_existing_plane_state - get plane state, if it exists + * @state: global atomic state object + * @plane: plane to grab + * + * This function returns the plane state for the given plane, or NULL + * if the plane is not part of the global atomic state. + */ +static inline struct drm_plane_state * +drm_atomic_get_existing_plane_state(struct drm_atomic_state *state, + struct drm_plane *plane) +{ + return state->plane_states[drm_plane_index(plane)]; +} + +/** + * drm_atomic_get_existing_connector_state - get connector state, if it exists + * @state: global atomic state object + * @connector: connector to grab + * + * This function returns the connector state for the given connector, + * or NULL if the connector is not part of the global atomic state. + */ +static inline struct drm_connector_state * +drm_atomic_get_existing_connector_state(struct drm_atomic_state *state, + struct drm_connector *connector) +{ + int index = drm_connector_index(connector); + + if (index >= state->num_connector) + return NULL; + + return state->connector_states[index]; +} + int __must_check drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state, struct drm_crtc *crtc); -- cgit v1.2.3 From 42c86547f4e5c2e81616c76ce9a2badce515c41f Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Wed, 11 Mar 2015 11:34:25 +0100 Subject: clk: Expose clk_hw_reparent() to providers To be used by clock implementations for switching to a new parent during rate change. Signed-off-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/clk/clk.c | 8 ++++++++ include/linux/clk-provider.h | 1 + 2 files changed, 9 insertions(+) (limited to 'include') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 459ce9da13e0..5315a273eae9 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -2020,6 +2020,14 @@ static void clk_core_reparent(struct clk_core *clk, __clk_recalc_rates(clk, POST_RATE_CHANGE); } +void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent) +{ + if (!hw) + return; + + clk_core_reparent(hw->core, !new_parent ? NULL : new_parent->core); +} + /** * clk_has_parent - check if a clock is a possible parent for another * @clk: clock source diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index df695313f975..51efb9ec3e37 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -589,6 +589,7 @@ long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate, unsigned long max_rate, unsigned long *best_parent_rate, struct clk_hw **best_parent_p); +void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent); static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src) { -- cgit v1.2.3 From 289fcff4bcdb1dcc0ce8788b7ea0f58a9e4a495f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 13 May 2015 15:26:42 +0300 Subject: usb: add bus type for USB ULPI UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi --- MAINTAINERS | 7 ++ drivers/usb/common/Makefile | 1 + drivers/usb/common/ulpi.c | 255 ++++++++++++++++++++++++++++++++++++++ drivers/usb/core/Kconfig | 20 +++ include/linux/mod_devicetable.h | 6 + include/linux/ulpi/driver.h | 60 +++++++++ include/linux/ulpi/interface.h | 23 ++++ include/linux/ulpi/regs.h | 130 +++++++++++++++++++ include/linux/usb/ulpi.h | 134 +------------------- scripts/mod/devicetable-offsets.c | 4 + scripts/mod/file2alias.c | 13 ++ 11 files changed, 521 insertions(+), 132 deletions(-) create mode 100644 drivers/usb/common/ulpi.c create mode 100644 include/linux/ulpi/driver.h create mode 100644 include/linux/ulpi/interface.h create mode 100644 include/linux/ulpi/regs.h (limited to 'include') diff --git a/MAINTAINERS b/MAINTAINERS index 2e5bbc0d68b2..2202e9194d83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10453,6 +10453,13 @@ S: Maintained F: Documentation/video4linux/zr364xx.txt F: drivers/media/usb/zr364xx/ +ULPI BUS +M: Heikki Krogerus +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/common/ulpi.c +F: include/linux/ulpi/ + USER-MODE LINUX (UML) M: Jeff Dike M: Richard Weinberger diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index ca2f8bd0e431..6bbb3ec17018 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -7,3 +7,4 @@ usb-common-y += common.o usb-common-$(CONFIG_USB_LED_TRIG) += led.o obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o +obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c new file mode 100644 index 000000000000..0e6f968e93fe --- /dev/null +++ b/drivers/usb/common/ulpi.c @@ -0,0 +1,255 @@ +/** + * ulpi.c - USB ULPI PHY bus + * + * Copyright (C) 2015 Intel Corporation + * + * Author: Heikki Krogerus + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/* -------------------------------------------------------------------------- */ + +int ulpi_read(struct ulpi *ulpi, u8 addr) +{ + return ulpi->ops->read(ulpi->ops, addr); +} +EXPORT_SYMBOL_GPL(ulpi_read); + +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) +{ + return ulpi->ops->write(ulpi->ops, addr, val); +} +EXPORT_SYMBOL_GPL(ulpi_write); + +/* -------------------------------------------------------------------------- */ + +static int ulpi_match(struct device *dev, struct device_driver *driver) +{ + struct ulpi_driver *drv = to_ulpi_driver(driver); + struct ulpi *ulpi = to_ulpi_dev(dev); + const struct ulpi_device_id *id; + + for (id = drv->id_table; id->vendor; id++) + if (id->vendor == ulpi->id.vendor && + id->product == ulpi->id.product) + return 1; + + return 0; +} + +static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct ulpi *ulpi = to_ulpi_dev(dev); + + if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x", + ulpi->id.vendor, ulpi->id.product)) + return -ENOMEM; + return 0; +} + +static int ulpi_probe(struct device *dev) +{ + struct ulpi_driver *drv = to_ulpi_driver(dev->driver); + + return drv->probe(to_ulpi_dev(dev)); +} + +static int ulpi_remove(struct device *dev) +{ + struct ulpi_driver *drv = to_ulpi_driver(dev->driver); + + if (drv->remove) + drv->remove(to_ulpi_dev(dev)); + + return 0; +} + +static struct bus_type ulpi_bus = { + .name = "ulpi", + .match = ulpi_match, + .uevent = ulpi_uevent, + .probe = ulpi_probe, + .remove = ulpi_remove, +}; + +/* -------------------------------------------------------------------------- */ + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ulpi *ulpi = to_ulpi_dev(dev); + + return sprintf(buf, "ulpi:v%04xp%04x\n", + ulpi->id.vendor, ulpi->id.product); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *ulpi_dev_attrs[] = { + &dev_attr_modalias.attr, + NULL +}; + +static struct attribute_group ulpi_dev_attr_group = { + .attrs = ulpi_dev_attrs, +}; + +static const struct attribute_group *ulpi_dev_attr_groups[] = { + &ulpi_dev_attr_group, + NULL +}; + +static void ulpi_dev_release(struct device *dev) +{ + kfree(to_ulpi_dev(dev)); +} + +static struct device_type ulpi_dev_type = { + .name = "ulpi_device", + .groups = ulpi_dev_attr_groups, + .release = ulpi_dev_release, +}; + +/* -------------------------------------------------------------------------- */ + +/** + * ulpi_register_driver - register a driver with the ULPI bus + * @drv: driver being registered + * + * Registers a driver with the ULPI bus. + */ +int ulpi_register_driver(struct ulpi_driver *drv) +{ + if (!drv->probe) + return -EINVAL; + + drv->driver.bus = &ulpi_bus; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(ulpi_register_driver); + +/** + * ulpi_unregister_driver - unregister a driver with the ULPI bus + * @drv: driver to unregister + * + * Unregisters a driver with the ULPI bus. + */ +void ulpi_unregister_driver(struct ulpi_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(ulpi_unregister_driver); + +/* -------------------------------------------------------------------------- */ + +static int ulpi_register(struct device *dev, struct ulpi *ulpi) +{ + int ret; + + /* Test the interface */ + ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); + if (ret < 0) + return ret; + + ret = ulpi_read(ulpi, ULPI_SCRATCH); + if (ret < 0) + return ret; + + if (ret != 0xaa) + return -ENODEV; + + ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW); + ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8; + + ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); + ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; + + ulpi->dev.parent = dev; + ulpi->dev.bus = &ulpi_bus; + ulpi->dev.type = &ulpi_dev_type; + dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); + + ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev)); + + request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); + + ret = device_register(&ulpi->dev); + if (ret) + return ret; + + dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", + ulpi->id.vendor, ulpi->id.product); + + return 0; +} + +/** + * ulpi_register_interface - instantiate new ULPI device + * @dev: USB controller's device interface + * @ops: ULPI register access + * + * Allocates and registers a ULPI device and an interface for it. Called from + * the USB controller that provides the ULPI interface. + */ +struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) +{ + struct ulpi *ulpi; + int ret; + + ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL); + if (!ulpi) + return ERR_PTR(-ENOMEM); + + ulpi->ops = ops; + ops->dev = dev; + + ret = ulpi_register(dev, ulpi); + if (ret) { + kfree(ulpi); + return ERR_PTR(ret); + } + + return ulpi; +} +EXPORT_SYMBOL_GPL(ulpi_register_interface); + +/** + * ulpi_unregister_interface - unregister ULPI interface + * @intrf: struct ulpi_interface + * + * Unregisters a ULPI device and it's interface that was created with + * ulpi_create_interface(). + */ +void ulpi_unregister_interface(struct ulpi *ulpi) +{ + device_unregister(&ulpi->dev); +} +EXPORT_SYMBOL_GPL(ulpi_unregister_interface); + +/* -------------------------------------------------------------------------- */ + +static int __init ulpi_init(void) +{ + return bus_register(&ulpi_bus); +} +module_init(ulpi_init); + +static void __exit ulpi_exit(void) +{ + bus_unregister(&ulpi_bus); +} +module_exit(ulpi_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB ULPI PHY bus"); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index cc0ced08bae2..a99c89e78126 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -84,3 +84,23 @@ config USB_OTG_FSM Implements OTG Finite State Machine as specified in On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification. +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + depends on USB_SUPPORT + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 3bfd56778c29..7ab00d61d30a 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -629,4 +629,10 @@ struct mcb_device_id { kernel_ulong_t driver_data; }; +struct ulpi_device_id { + __u16 vendor; + __u16 product; + kernel_ulong_t driver_data; +}; + #endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h new file mode 100644 index 000000000000..388f6e08b9d4 --- /dev/null +++ b/include/linux/ulpi/driver.h @@ -0,0 +1,60 @@ +#ifndef __LINUX_ULPI_DRIVER_H +#define __LINUX_ULPI_DRIVER_H + +#include + +#include + +struct ulpi_ops; + +/** + * struct ulpi - describes ULPI PHY device + * @id: vendor and product ids for ULPI device + * @ops: I/O access + * @dev: device interface + */ +struct ulpi { + struct ulpi_device_id id; + struct ulpi_ops *ops; + struct device dev; +}; + +#define to_ulpi_dev(d) container_of(d, struct ulpi, dev) + +static inline void ulpi_set_drvdata(struct ulpi *ulpi, void *data) +{ + dev_set_drvdata(&ulpi->dev, data); +} + +static inline void *ulpi_get_drvdata(struct ulpi *ulpi) +{ + return dev_get_drvdata(&ulpi->dev); +} + +/** + * struct ulpi_driver - describes a ULPI PHY driver + * @id_table: array of device identifiers supported by this driver + * @probe: binds this driver to ULPI device + * @remove: unbinds this driver from ULPI device + * @driver: the name and owner members must be initialized by the drivers + */ +struct ulpi_driver { + const struct ulpi_device_id *id_table; + int (*probe)(struct ulpi *ulpi); + void (*remove)(struct ulpi *ulpi); + struct device_driver driver; +}; + +#define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver) + +int ulpi_register_driver(struct ulpi_driver *drv); +void ulpi_unregister_driver(struct ulpi_driver *drv); + +#define module_ulpi_driver(__ulpi_driver) \ + module_driver(__ulpi_driver, ulpi_register_driver, \ + ulpi_unregister_driver) + +int ulpi_read(struct ulpi *ulpi, u8 addr); +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val); + +#endif /* __LINUX_ULPI_DRIVER_H */ diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h new file mode 100644 index 000000000000..4de8ab491038 --- /dev/null +++ b/include/linux/ulpi/interface.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_ULPI_INTERFACE_H +#define __LINUX_ULPI_INTERFACE_H + +#include + +struct ulpi; + +/** + * struct ulpi_ops - ULPI register access + * @dev: the interface provider + * @read: read operation for ULPI register access + * @write: write operation for ULPI register access + */ +struct ulpi_ops { + struct device *dev; + int (*read)(struct ulpi_ops *ops, u8 addr); + int (*write)(struct ulpi_ops *ops, u8 addr, u8 val); +}; + +struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *); +void ulpi_unregister_interface(struct ulpi *); + +#endif /* __LINUX_ULPI_INTERFACE_H */ diff --git a/include/linux/ulpi/regs.h b/include/linux/ulpi/regs.h new file mode 100644 index 000000000000..b5b8b8804560 --- /dev/null +++ b/include/linux/ulpi/regs.h @@ -0,0 +1,130 @@ +#ifndef __LINUX_ULPI_REGS_H +#define __LINUX_ULPI_REGS_H + +/* + * Macros for Set and Clear + * See ULPI 1.1 specification to find the registers with Set and Clear offsets + */ +#define ULPI_SET(a) (a + 1) +#define ULPI_CLR(a) (a + 2) + +/* + * Register Map + */ +#define ULPI_VENDOR_ID_LOW 0x00 +#define ULPI_VENDOR_ID_HIGH 0x01 +#define ULPI_PRODUCT_ID_LOW 0x02 +#define ULPI_PRODUCT_ID_HIGH 0x03 +#define ULPI_FUNC_CTRL 0x04 +#define ULPI_IFC_CTRL 0x07 +#define ULPI_OTG_CTRL 0x0a +#define ULPI_USB_INT_EN_RISE 0x0d +#define ULPI_USB_INT_EN_FALL 0x10 +#define ULPI_USB_INT_STS 0x13 +#define ULPI_USB_INT_LATCH 0x14 +#define ULPI_DEBUG 0x15 +#define ULPI_SCRATCH 0x16 +/* Optional Carkit Registers */ +#define ULPI_CARKIT_CTRL 0x19 +#define ULPI_CARKIT_INT_DELAY 0x1c +#define ULPI_CARKIT_INT_EN 0x1d +#define ULPI_CARKIT_INT_STS 0x20 +#define ULPI_CARKIT_INT_LATCH 0x21 +#define ULPI_CARKIT_PLS_CTRL 0x22 +/* Other Optional Registers */ +#define ULPI_TX_POS_WIDTH 0x25 +#define ULPI_TX_NEG_WIDTH 0x26 +#define ULPI_POLARITY_RECOVERY 0x27 +/* Access Extended Register Set */ +#define ULPI_ACCESS_EXTENDED 0x2f +/* Vendor Specific */ +#define ULPI_VENDOR_SPECIFIC 0x30 +/* Extended Registers */ +#define ULPI_EXT_VENDOR_SPECIFIC 0x80 + +/* + * Register Bits + */ + +/* Function Control */ +#define ULPI_FUNC_CTRL_XCVRSEL BIT(0) +#define ULPI_FUNC_CTRL_XCVRSEL_MASK 0x3 +#define ULPI_FUNC_CTRL_HIGH_SPEED 0x0 +#define ULPI_FUNC_CTRL_FULL_SPEED 0x1 +#define ULPI_FUNC_CTRL_LOW_SPEED 0x2 +#define ULPI_FUNC_CTRL_FS4LS 0x3 +#define ULPI_FUNC_CTRL_TERMSELECT BIT(2) +#define ULPI_FUNC_CTRL_OPMODE BIT(3) +#define ULPI_FUNC_CTRL_OPMODE_MASK (0x3 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0x0 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (0x1 << 3) +#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (0x2 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (0x3 << 3) +#define ULPI_FUNC_CTRL_RESET BIT(5) +#define ULPI_FUNC_CTRL_SUSPENDM BIT(6) + +/* Interface Control */ +#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE BIT(0) +#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE BIT(1) +#define ULPI_IFC_CTRL_CARKITMODE BIT(2) +#define ULPI_IFC_CTRL_CLOCKSUSPENDM BIT(3) +#define ULPI_IFC_CTRL_AUTORESUME BIT(4) +#define ULPI_IFC_CTRL_EXTERNAL_VBUS BIT(5) +#define ULPI_IFC_CTRL_PASSTHRU BIT(6) +#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE BIT(7) + +/* OTG Control */ +#define ULPI_OTG_CTRL_ID_PULLUP BIT(0) +#define ULPI_OTG_CTRL_DP_PULLDOWN BIT(1) +#define ULPI_OTG_CTRL_DM_PULLDOWN BIT(2) +#define ULPI_OTG_CTRL_DISCHRGVBUS BIT(3) +#define ULPI_OTG_CTRL_CHRGVBUS BIT(4) +#define ULPI_OTG_CTRL_DRVVBUS BIT(5) +#define ULPI_OTG_CTRL_DRVVBUS_EXT BIT(6) +#define ULPI_OTG_CTRL_EXTVBUSIND BIT(7) + +/* USB Interrupt Enable Rising, + * USB Interrupt Enable Falling, + * USB Interrupt Status and + * USB Interrupt Latch + */ +#define ULPI_INT_HOST_DISCONNECT BIT(0) +#define ULPI_INT_VBUS_VALID BIT(1) +#define ULPI_INT_SESS_VALID BIT(2) +#define ULPI_INT_SESS_END BIT(3) +#define ULPI_INT_IDGRD BIT(4) + +/* Debug */ +#define ULPI_DEBUG_LINESTATE0 BIT(0) +#define ULPI_DEBUG_LINESTATE1 BIT(1) + +/* Carkit Control */ +#define ULPI_CARKIT_CTRL_CARKITPWR BIT(0) +#define ULPI_CARKIT_CTRL_IDGNDDRV BIT(1) +#define ULPI_CARKIT_CTRL_TXDEN BIT(2) +#define ULPI_CARKIT_CTRL_RXDEN BIT(3) +#define ULPI_CARKIT_CTRL_SPKLEFTEN BIT(4) +#define ULPI_CARKIT_CTRL_SPKRIGHTEN BIT(5) +#define ULPI_CARKIT_CTRL_MICEN BIT(6) + +/* Carkit Interrupt Enable */ +#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE BIT(0) +#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL BIT(1) +#define ULPI_CARKIT_INT_EN_CARINTDET BIT(2) +#define ULPI_CARKIT_INT_EN_DP_RISE BIT(3) +#define ULPI_CARKIT_INT_EN_DP_FALL BIT(4) + +/* Carkit Interrupt Status and + * Carkit Interrupt Latch + */ +#define ULPI_CARKIT_INT_IDFLOAT BIT(0) +#define ULPI_CARKIT_INT_CARINTDET BIT(1) +#define ULPI_CARKIT_INT_DP BIT(2) + +/* Carkit Pulse Control*/ +#define ULPI_CARKIT_PLS_CTRL_TXPLSEN BIT(0) +#define ULPI_CARKIT_PLS_CTRL_RXPLSEN BIT(1) +#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN BIT(2) +#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN BIT(3) + +#endif /* __LINUX_ULPI_REGS_H */ diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 5c295c26ad37..5f07407a367a 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -12,6 +12,8 @@ #define __LINUX_USB_ULPI_H #include +#include + /*-------------------------------------------------------------------------*/ /* @@ -49,138 +51,6 @@ /*-------------------------------------------------------------------------*/ -/* - * Macros for Set and Clear - * See ULPI 1.1 specification to find the registers with Set and Clear offsets - */ -#define ULPI_SET(a) (a + 1) -#define ULPI_CLR(a) (a + 2) - -/*-------------------------------------------------------------------------*/ - -/* - * Register Map - */ -#define ULPI_VENDOR_ID_LOW 0x00 -#define ULPI_VENDOR_ID_HIGH 0x01 -#define ULPI_PRODUCT_ID_LOW 0x02 -#define ULPI_PRODUCT_ID_HIGH 0x03 -#define ULPI_FUNC_CTRL 0x04 -#define ULPI_IFC_CTRL 0x07 -#define ULPI_OTG_CTRL 0x0a -#define ULPI_USB_INT_EN_RISE 0x0d -#define ULPI_USB_INT_EN_FALL 0x10 -#define ULPI_USB_INT_STS 0x13 -#define ULPI_USB_INT_LATCH 0x14 -#define ULPI_DEBUG 0x15 -#define ULPI_SCRATCH 0x16 -/* Optional Carkit Registers */ -#define ULPI_CARCIT_CTRL 0x19 -#define ULPI_CARCIT_INT_DELAY 0x1c -#define ULPI_CARCIT_INT_EN 0x1d -#define ULPI_CARCIT_INT_STS 0x20 -#define ULPI_CARCIT_INT_LATCH 0x21 -#define ULPI_CARCIT_PLS_CTRL 0x22 -/* Other Optional Registers */ -#define ULPI_TX_POS_WIDTH 0x25 -#define ULPI_TX_NEG_WIDTH 0x26 -#define ULPI_POLARITY_RECOVERY 0x27 -/* Access Extended Register Set */ -#define ULPI_ACCESS_EXTENDED 0x2f -/* Vendor Specific */ -#define ULPI_VENDOR_SPECIFIC 0x30 -/* Extended Registers */ -#define ULPI_EXT_VENDOR_SPECIFIC 0x80 - -/*-------------------------------------------------------------------------*/ - -/* - * Register Bits - */ - -/* Function Control */ -#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0) -#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0) -#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0) -#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0) -#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0) -#define ULPI_FUNC_CTRL_FS4LS (3 << 0) -#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2) -#define ULPI_FUNC_CTRL_OPMODE (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3) -#define ULPI_FUNC_CTRL_RESET (1 << 5) -#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6) - -/* Interface Control */ -#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0) -#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1) -#define ULPI_IFC_CTRL_CARKITMODE (1 << 2) -#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3) -#define ULPI_IFC_CTRL_AUTORESUME (1 << 4) -#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5) -#define ULPI_IFC_CTRL_PASSTHRU (1 << 6) -#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7) - -/* OTG Control */ -#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0) -#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1) -#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2) -#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3) -#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4) -#define ULPI_OTG_CTRL_DRVVBUS (1 << 5) -#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6) -#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7) - -/* USB Interrupt Enable Rising, - * USB Interrupt Enable Falling, - * USB Interrupt Status and - * USB Interrupt Latch - */ -#define ULPI_INT_HOST_DISCONNECT (1 << 0) -#define ULPI_INT_VBUS_VALID (1 << 1) -#define ULPI_INT_SESS_VALID (1 << 2) -#define ULPI_INT_SESS_END (1 << 3) -#define ULPI_INT_IDGRD (1 << 4) - -/* Debug */ -#define ULPI_DEBUG_LINESTATE0 (1 << 0) -#define ULPI_DEBUG_LINESTATE1 (1 << 1) - -/* Carkit Control */ -#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) -#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) -#define ULPI_CARKIT_CTRL_TXDEN (1 << 2) -#define ULPI_CARKIT_CTRL_RXDEN (1 << 3) -#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) -#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) -#define ULPI_CARKIT_CTRL_MICEN (1 << 6) - -/* Carkit Interrupt Enable */ -#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) -#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) -#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) -#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) -#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) - -/* Carkit Interrupt Status and - * Carkit Interrupt Latch - */ -#define ULPI_CARKIT_INT_IDFLOAT (1 << 0) -#define ULPI_CARKIT_INT_CARINTDET (1 << 1) -#define ULPI_CARKIT_INT_DP (1 << 2) - -/* Carkit Pulse Control*/ -#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) -#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) -#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) -#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) - -/*-------------------------------------------------------------------------*/ - #if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index fce36d0f6898..ada8417362c7 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -189,5 +189,9 @@ int main(void) DEVID_FIELD(rio_device_id, asm_did); DEVID_FIELD(rio_device_id, asm_vid); + DEVID(ulpi_device_id); + DEVID_FIELD(ulpi_device_id, vendor); + DEVID_FIELD(ulpi_device_id, product); + return 0; } diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 78691d51a479..a7a8560db44d 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1192,6 +1192,19 @@ static int do_rio_entry(const char *filename, } ADD_TO_DEVTABLE("rapidio", rio_device_id, do_rio_entry); +/* Looks like: ulpi:vNpN */ +static int do_ulpi_entry(const char *filename, void *symval, + char *alias) +{ + DEF_FIELD(symval, ulpi_device_id, vendor); + DEF_FIELD(symval, ulpi_device_id, product); + + sprintf(alias, "ulpi:v%04xp%04x", vendor, product); + + return 1; +} +ADD_TO_DEVTABLE("ulpi", ulpi_device_id, do_ulpi_entry); + /* Does namelen bytes of name exactly match the symbol? */ static bool sym_is(const char *name, unsigned namelen, const char *symbol) { -- cgit v1.2.3 From f267caab44451baa70d25fa3191a68bb79ad1b08 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 13 May 2015 14:03:51 -0400 Subject: tracing: Remove unused prototype ftrace_event_define_field() ftrace_event_define_field() has a prototype defined but never used. Remove it. Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 65ce6de91307..f8465d65f3c7 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -219,10 +219,6 @@ struct ftrace_event_class { extern int ftrace_event_reg(struct ftrace_event_call *event, enum trace_reg type, void *data); -int ftrace_event_define_field(struct ftrace_event_call *call, - char *type, int len, char *item, int offset, - int field_size, int sign, int filter); - struct ftrace_event_buffer { struct ring_buffer *buffer; struct ring_buffer_event *event; @@ -238,10 +234,6 @@ void *ftrace_event_buffer_reserve(struct ftrace_event_buffer *fbuffer, void ftrace_event_buffer_commit(struct ftrace_event_buffer *fbuffer); -int ftrace_event_define_field(struct ftrace_event_call *call, - char *type, int len, char *item, int offset, - int field_size, int sign, int filter); - enum { TRACE_EVENT_FL_FILTERED_BIT, TRACE_EVENT_FL_CAP_ANY_BIT, -- cgit v1.2.3 From 2167ae727215714d25fe44945cdbe6157f7ac481 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 29 Apr 2015 09:57:36 -0400 Subject: tracing: Rename trace/ftrace.h to trace/trace_events.h The name "ftrace" really refers to the function hook infrastructure. It is not about the TRACE_EVENT() macros. The file trace/ftrace.h was originally written to be mostly focused toward the "ftrace" code (that in kernel/trace/) but ended up being generic and used by perf and others. Rename the file to be less confusing about what infrastructure it belongs to. Signed-off-by: Steven Rostedt --- include/trace/define_trace.h | 2 +- include/trace/ftrace.h | 859 ------------------------------------------- include/trace/trace_events.h | 859 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 860 insertions(+), 860 deletions(-) delete mode 100644 include/trace/ftrace.h create mode 100644 include/trace/trace_events.h (limited to 'include') diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h index 02e1003568a4..b13ba2fc76f7 100644 --- a/include/trace/define_trace.h +++ b/include/trace/define_trace.h @@ -87,7 +87,7 @@ #define DECLARE_TRACE(name, proto, args) #ifdef CONFIG_EVENT_TRACING -#include +#include #endif #undef TRACE_EVENT diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h deleted file mode 100644 index 37d4b10b111d..000000000000 --- a/include/trace/ftrace.h +++ /dev/null @@ -1,859 +0,0 @@ -/* - * Stage 1 of the trace events. - * - * Override the macros in to include the following: - * - * struct ftrace_raw_ { - * struct trace_entry ent; - * ; - * []; - * [...] - * }; - * - * The is created by the __field(type, item) macro or - * the __array(type2, item2, len) macro. - * We simply do "type item;", and that will create the fields - * in the structure. - */ - -#include - -#ifndef TRACE_SYSTEM_VAR -#define TRACE_SYSTEM_VAR TRACE_SYSTEM -#endif - -#define __app__(x, y) str__##x##y -#define __app(x, y) __app__(x, y) - -#define TRACE_SYSTEM_STRING __app(TRACE_SYSTEM_VAR,__trace_system_name) - -#define TRACE_MAKE_SYSTEM_STR() \ - static const char TRACE_SYSTEM_STRING[] = \ - __stringify(TRACE_SYSTEM) - -TRACE_MAKE_SYSTEM_STR(); - -#undef TRACE_DEFINE_ENUM -#define TRACE_DEFINE_ENUM(a) \ - static struct trace_enum_map __used __initdata \ - __##TRACE_SYSTEM##_##a = \ - { \ - .system = TRACE_SYSTEM_STRING, \ - .enum_string = #a, \ - .enum_value = a \ - }; \ - static struct trace_enum_map __used \ - __attribute__((section("_ftrace_enum_map"))) \ - *TRACE_SYSTEM##_##a = &__##TRACE_SYSTEM##_##a - -/* - * DECLARE_EVENT_CLASS can be used to add a generic function - * handlers for events. That is, if all events have the same - * parameters and just have distinct trace points. - * Each tracepoint can be defined with DEFINE_EVENT and that - * will map the DECLARE_EVENT_CLASS to the tracepoint. - * - * TRACE_EVENT is a one to one mapping between tracepoint and template. - */ -#undef TRACE_EVENT -#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \ - DECLARE_EVENT_CLASS(name, \ - PARAMS(proto), \ - PARAMS(args), \ - PARAMS(tstruct), \ - PARAMS(assign), \ - PARAMS(print)); \ - DEFINE_EVENT(name, name, PARAMS(proto), PARAMS(args)); - - -#undef __field -#define __field(type, item) type item; - -#undef __field_ext -#define __field_ext(type, item, filter_type) type item; - -#undef __field_struct -#define __field_struct(type, item) type item; - -#undef __field_struct_ext -#define __field_struct_ext(type, item, filter_type) type item; - -#undef __array -#define __array(type, item, len) type item[len]; - -#undef __dynamic_array -#define __dynamic_array(type, item, len) u32 __data_loc_##item; - -#undef __string -#define __string(item, src) __dynamic_array(char, item, -1) - -#undef __bitmask -#define __bitmask(item, nr_bits) __dynamic_array(char, item, -1) - -#undef TP_STRUCT__entry -#define TP_STRUCT__entry(args...) args - -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print) \ - struct ftrace_raw_##name { \ - struct trace_entry ent; \ - tstruct \ - char __data[0]; \ - }; \ - \ - static struct ftrace_event_class event_class_##name; - -#undef DEFINE_EVENT -#define DEFINE_EVENT(template, name, proto, args) \ - static struct ftrace_event_call __used \ - __attribute__((__aligned__(4))) event_##name - -#undef DEFINE_EVENT_FN -#define DEFINE_EVENT_FN(template, name, proto, args, reg, unreg) \ - DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args)) - -#undef DEFINE_EVENT_PRINT -#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \ - DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args)) - -/* Callbacks are meaningless to ftrace. */ -#undef TRACE_EVENT_FN -#define TRACE_EVENT_FN(name, proto, args, tstruct, \ - assign, print, reg, unreg) \ - TRACE_EVENT(name, PARAMS(proto), PARAMS(args), \ - PARAMS(tstruct), PARAMS(assign), PARAMS(print)) \ - -#undef TRACE_EVENT_FLAGS -#define TRACE_EVENT_FLAGS(name, value) \ - __TRACE_EVENT_FLAGS(name, value) - -#undef TRACE_EVENT_PERF_PERM -#define TRACE_EVENT_PERF_PERM(name, expr...) \ - __TRACE_EVENT_PERF_PERM(name, expr) - -#include TRACE_INCLUDE(TRACE_INCLUDE_FILE) - -/* - * Stage 2 of the trace events. - * - * Include the following: - * - * struct ftrace_data_offsets_ { - * u32 ; - * u32 ; - * [...] - * }; - * - * The __dynamic_array() macro will create each u32 , this is - * to keep the offset of each array from the beginning of the event. - * The size of an array is also encoded, in the higher 16 bits of . - */ - -#undef TRACE_DEFINE_ENUM -#define TRACE_DEFINE_ENUM(a) - -#undef __field -#define __field(type, item) - -#undef __field_ext -#define __field_ext(type, item, filter_type) - -#undef __field_struct -#define __field_struct(type, item) - -#undef __field_struct_ext -#define __field_struct_ext(type, item, filter_type) - -#undef __array -#define __array(type, item, len) - -#undef __dynamic_array -#define __dynamic_array(type, item, len) u32 item; - -#undef __string -#define __string(item, src) __dynamic_array(char, item, -1) - -#undef __bitmask -#define __bitmask(item, nr_bits) __dynamic_array(unsigned long, item, -1) - -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ - struct ftrace_data_offsets_##call { \ - tstruct; \ - }; - -#undef DEFINE_EVENT -#define DEFINE_EVENT(template, name, proto, args) - -#undef DEFINE_EVENT_PRINT -#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \ - DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args)) - -#undef TRACE_EVENT_FLAGS -#define TRACE_EVENT_FLAGS(event, flag) - -#undef TRACE_EVENT_PERF_PERM -#define TRACE_EVENT_PERF_PERM(event, expr...) - -#include TRACE_INCLUDE(TRACE_INCLUDE_FILE) - -/* - * Stage 3 of the trace events. - * - * Override the macros in to include the following: - * - * enum print_line_t - * ftrace_raw_output_(struct trace_iterator *iter, int flags) - * { - * struct trace_seq *s = &iter->seq; - * struct ftrace_raw_ *field; <-- defined in stage 1 - * struct trace_entry *entry; - * struct trace_seq *p = &iter->tmp_seq; - * int ret; - * - * entry = iter->ent; - * - * if (entry->type != event_->event.type) { - * WARN_ON_ONCE(1); - * return TRACE_TYPE_UNHANDLED; - * } - * - * field = (typeof(field))entry; - * - * trace_seq_init(p); - * ret = trace_seq_printf(s, "%s: ", ); - * if (ret) - * ret = trace_seq_printf(s, "\n"); - * if (!ret) - * return TRACE_TYPE_PARTIAL_LINE; - * - * return TRACE_TYPE_HANDLED; - * } - * - * This is the method used to print the raw event to the trace - * output format. Note, this is not needed if the data is read - * in binary. - */ - -#undef __entry -#define __entry field - -#undef TP_printk -#define TP_printk(fmt, args...) fmt "\n", args - -#undef __get_dynamic_array -#define __get_dynamic_array(field) \ - ((void *)__entry + (__entry->__data_loc_##field & 0xffff)) - -#undef __get_dynamic_array_len -#define __get_dynamic_array_len(field) \ - ((__entry->__data_loc_##field >> 16) & 0xffff) - -#undef __get_str -#define __get_str(field) (char *)__get_dynamic_array(field) - -#undef __get_bitmask -#define __get_bitmask(field) \ - ({ \ - void *__bitmask = __get_dynamic_array(field); \ - unsigned int __bitmask_size; \ - __bitmask_size = __get_dynamic_array_len(field); \ - ftrace_print_bitmask_seq(p, __bitmask, __bitmask_size); \ - }) - -#undef __print_flags -#define __print_flags(flag, delim, flag_array...) \ - ({ \ - static const struct trace_print_flags __flags[] = \ - { flag_array, { -1, NULL }}; \ - ftrace_print_flags_seq(p, delim, flag, __flags); \ - }) - -#undef __print_symbolic -#define __print_symbolic(value, symbol_array...) \ - ({ \ - static const struct trace_print_flags symbols[] = \ - { symbol_array, { -1, NULL }}; \ - ftrace_print_symbols_seq(p, value, symbols); \ - }) - -#undef __print_symbolic_u64 -#if BITS_PER_LONG == 32 -#define __print_symbolic_u64(value, symbol_array...) \ - ({ \ - static const struct trace_print_flags_u64 symbols[] = \ - { symbol_array, { -1, NULL } }; \ - ftrace_print_symbols_seq_u64(p, value, symbols); \ - }) -#else -#define __print_symbolic_u64(value, symbol_array...) \ - __print_symbolic(value, symbol_array) -#endif - -#undef __print_hex -#define __print_hex(buf, buf_len) ftrace_print_hex_seq(p, buf, buf_len) - -#undef __print_array -#define __print_array(array, count, el_size) \ - ({ \ - BUILD_BUG_ON(el_size != 1 && el_size != 2 && \ - el_size != 4 && el_size != 8); \ - ftrace_print_array_seq(p, array, count, el_size); \ - }) - -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ -static notrace enum print_line_t \ -ftrace_raw_output_##call(struct trace_iterator *iter, int flags, \ - struct trace_event *trace_event) \ -{ \ - struct trace_seq *s = &iter->seq; \ - struct trace_seq __maybe_unused *p = &iter->tmp_seq; \ - struct ftrace_raw_##call *field; \ - int ret; \ - \ - field = (typeof(field))iter->ent; \ - \ - ret = ftrace_raw_output_prep(iter, trace_event); \ - if (ret != TRACE_TYPE_HANDLED) \ - return ret; \ - \ - trace_seq_printf(s, print); \ - \ - return trace_handle_return(s); \ -} \ -static struct trace_event_functions ftrace_event_type_funcs_##call = { \ - .trace = ftrace_raw_output_##call, \ -}; - -#undef DEFINE_EVENT_PRINT -#define DEFINE_EVENT_PRINT(template, call, proto, args, print) \ -static notrace enum print_line_t \ -ftrace_raw_output_##call(struct trace_iterator *iter, int flags, \ - struct trace_event *event) \ -{ \ - struct ftrace_raw_##template *field; \ - struct trace_entry *entry; \ - struct trace_seq *p = &iter->tmp_seq; \ - \ - entry = iter->ent; \ - \ - if (entry->type != event_##call.event.type) { \ - WARN_ON_ONCE(1); \ - return TRACE_TYPE_UNHANDLED; \ - } \ - \ - field = (typeof(field))entry; \ - \ - trace_seq_init(p); \ - return ftrace_output_call(iter, #call, print); \ -} \ -static struct trace_event_functions ftrace_event_type_funcs_##call = { \ - .trace = ftrace_raw_output_##call, \ -}; - -#include TRACE_INCLUDE(TRACE_INCLUDE_FILE) - -#undef __field_ext -#define __field_ext(type, item, filter_type) \ - ret = trace_define_field(event_call, #type, #item, \ - offsetof(typeof(field), item), \ - sizeof(field.item), \ - is_signed_type(type), filter_type); \ - if (ret) \ - return ret; - -#undef __field_struct_ext -#define __field_struct_ext(type, item, filter_type) \ - ret = trace_define_field(event_call, #type, #item, \ - offsetof(typeof(field), item), \ - sizeof(field.item), \ - 0, filter_type); \ - if (ret) \ - return ret; - -#undef __field -#define __field(type, item) __field_ext(type, item, FILTER_OTHER) - -#undef __field_struct -#define __field_struct(type, item) __field_struct_ext(type, item, FILTER_OTHER) - -#undef __array -#define __array(type, item, len) \ - do { \ - char *type_str = #type"["__stringify(len)"]"; \ - BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \ - ret = trace_define_field(event_call, type_str, #item, \ - offsetof(typeof(field), item), \ - sizeof(field.item), \ - is_signed_type(type), FILTER_OTHER); \ - if (ret) \ - return ret; \ - } while (0); - -#undef __dynamic_array -#define __dynamic_array(type, item, len) \ - ret = trace_define_field(event_call, "__data_loc " #type "[]", #item, \ - offsetof(typeof(field), __data_loc_##item), \ - sizeof(field.__data_loc_##item), \ - is_signed_type(type), FILTER_OTHER); - -#undef __string -#define __string(item, src) __dynamic_array(char, item, -1) - -#undef __bitmask -#define __bitmask(item, nr_bits) __dynamic_array(unsigned long, item, -1) - -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, func, print) \ -static int notrace __init \ -ftrace_define_fields_##call(struct ftrace_event_call *event_call) \ -{ \ - struct ftrace_raw_##call field; \ - int ret; \ - \ - tstruct; \ - \ - return ret; \ -} - -#undef DEFINE_EVENT -#define DEFINE_EVENT(template, name, proto, args) - -#undef DEFINE_EVENT_PRINT -#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \ - DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args)) - -#include TRACE_INCLUDE(TRACE_INCLUDE_FILE) - -/* - * remember the offset of each array from the beginning of the event. - */ - -#undef __entry -#define __entry entry - -#undef __field -#define __field(type, item) - -#undef __field_ext -#define __field_ext(type, item, filter_type) - -#undef __field_struct -#define __field_struct(type, item) - -#undef __field_struct_ext -#define __field_struct_ext(type, item, filter_type) - -#undef __array -#define __array(type, item, len) - -#undef __dynamic_array -#define __dynamic_array(type, item, len) \ - __item_length = (len) * sizeof(type); \ - __data_offsets->item = __data_size + \ - offsetof(typeof(*entry), __data); \ - __data_offsets->item |= __item_length << 16; \ - __data_size += __item_length; - -#undef __string -#define __string(item, src) __dynamic_array(char, item, \ - strlen((src) ? (const char *)(src) : "(null)") + 1) - -/* - * __bitmask_size_in_bytes_raw is the number of bytes needed to hold - * num_possible_cpus(). - */ -#define __bitmask_size_in_bytes_raw(nr_bits) \ - (((nr_bits) + 7) / 8) - -#define __bitmask_size_in_longs(nr_bits) \ - ((__bitmask_size_in_bytes_raw(nr_bits) + \ - ((BITS_PER_LONG / 8) - 1)) / (BITS_PER_LONG / 8)) - -/* - * __bitmask_size_in_bytes is the number of bytes needed to hold - * num_possible_cpus() padded out to the nearest long. This is what - * is saved in the buffer, just to be consistent. - */ -#define __bitmask_size_in_bytes(nr_bits) \ - (__bitmask_size_in_longs(nr_bits) * (BITS_PER_LONG / 8)) - -#undef __bitmask -#define __bitmask(item, nr_bits) __dynamic_array(unsigned long, item, \ - __bitmask_size_in_longs(nr_bits)) - -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ -static inline notrace int ftrace_get_offsets_##call( \ - struct ftrace_data_offsets_##call *__data_offsets, proto) \ -{ \ - int __data_size = 0; \ - int __maybe_unused __item_length; \ - struct ftrace_raw_##call __maybe_unused *entry; \ - \ - tstruct; \ - \ - return __data_size; \ -} - -#undef DEFINE_EVENT -#define DEFINE_EVENT(template, name, proto, args) - -#undef DEFINE_EVENT_PRINT -#define DEFINE_EVENT_PRINT(template, name, proto, args, print) \ - DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args)) - -#include TRACE_INCLUDE(TRACE_INCLUDE_FILE) - -/* - * Stage 4 of the trace events. - * - * Override the macros in to include the following: - * - * For those macros defined with TRACE_EVENT: - * - * static struct ftrace_event_call event_; - * - * static void ftrace_raw_event_(void *__data, proto) - * { - * struct ftrace_event_file *ftrace_file = __data; - * struct ftrace_event_call *event_call = ftrace_file->event_call; - * struct ftrace_data_offsets_ __maybe_unused __data_offsets; - * unsigned long eflags = ftrace_file->flags; - * enum event_trigger_type __tt = ETT_NONE; - * struct ring_buffer_event *event; - * struct ftrace_raw_ *entry; <-- defined in stage 1 - * struct ring_buffer *buffer; - * unsigned long irq_flags; - * int __data_size; - * int pc; - * - * if (!(eflags & FTRACE_EVENT_FL_TRIGGER_COND)) { - * if (eflags & FTRACE_EVENT_FL_TRIGGER_MODE) - * event_triggers_call(ftrace_file, NULL); - * if (eflags & FTRACE_EVENT_FL_SOFT_DISABLED) - * return; - * } - * - * local_save_flags(irq_flags); - * pc = preempt_count(); - * - * __data_size = ftrace_get_offsets_(&__data_offsets, args); - * - * event = trace_event_buffer_lock_reserve(&buffer, ftrace_file, - * event_->event.type, - * sizeof(*entry) + __data_size, - * irq_flags, pc); - * if (!event) - * return; - * entry = ring_buffer_event_data(event); - * - * { ; } <-- Here we assign the entries by the __field and - * __array macros. - * - * if (eflags & FTRACE_EVENT_FL_TRIGGER_COND) - * __tt = event_triggers_call(ftrace_file, entry); - * - * if (test_bit(FTRACE_EVENT_FL_SOFT_DISABLED_BIT, - * &ftrace_file->flags)) - * ring_buffer_discard_commit(buffer, event); - * else if (!filter_check_discard(ftrace_file, entry, buffer, event)) - * trace_buffer_unlock_commit(buffer, event, irq_flags, pc); - * - * if (__tt) - * event_triggers_post_call(ftrace_file, __tt); - * } - * - * static struct trace_event ftrace_event_type_ = { - * .trace = ftrace_raw_output_, <-- stage 2 - * }; - * - * static char print_fmt_[] = ; - * - * static struct ftrace_event_class __used event_class_