From 4534874a8720a361845dce47d310a98e9aac8aeb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 8 Oct 2012 15:11:21 +0200 Subject: USB: EHCI: add no_io_watchdog platform_data parameter to ehci-platform Enhance the ehci-platform driver to also accept no_io_watchdog as a platform data parameter. When no_io_watchdog is set to 1, the ehci controller will set ehci->need_io_watchdog to 0. Since most EHCI controllers do need the I/O watchdog to be on, only let those which need it to turn the watchdog off. Make sure that we change need_io_watchdog after the call to ehci_setup() because ehci_setup() will unconditionnaly set need_io_watchdog to 1. Signed-off-by: Florian Fainelli Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_pdriver.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index c9d09f8b7ff2..67ac74bde6d0 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -29,6 +29,8 @@ * initialization. * @port_power_off: set to 1 if the controller needs to be powered down * after initialization. + * @no_io_watchdog: set to 1 if the controller does not need the I/O + * watchdog to run. * * These are general configuration options for the EHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -41,6 +43,7 @@ struct usb_ehci_pdata { unsigned big_endian_mmio:1; unsigned port_power_on:1; unsigned port_power_off:1; + unsigned no_io_watchdog:1; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); -- cgit v1.2.3