From 026331c4d9b526561ea96f95fac4bfc52b69e316 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 15 Feb 2010 12:53:10 +0200 Subject: cfg80211/mac80211: allow registering for and sending action frames This implements a new command to register for action frames that userspace wants to handle instead of the in-kernel rejection. It is then responsible for rejecting ones that it decided not to handle. There is no unregistration, but the socket can be closed for that. Frames that are not registered for will not be forwarded to userspace and will be rejected by the kernel, the cfg80211 API helps implementing that. Additionally, this patch adds a new command that allows doing action frame transmission from userspace. It can be used either to exchange action frames on the current operational channel (e.g., with the AP with which we are currently associated) or to exchange off-channel Public Action frames with the remain-on-channel command. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 41 ++++++++++++++++++++++++++++++++++++++++- include/net/cfg80211.h | 47 ++++++++++++++++++++++++++++++++++++++++++++++- include/net/mac80211.h | 6 +++++- 3 files changed, 91 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 127a73015760..8e6384f8fda6 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -3,7 +3,7 @@ /* * 802.11 netlink interface public header * - * Copyright 2006, 2007, 2008 Johannes Berg + * Copyright 2006-2010 Johannes Berg * Copyright 2008 Michael Wu * Copyright 2008 Luis Carlos Cobo * Copyright 2008 Michael Buesch @@ -299,6 +299,31 @@ * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface * and @NL80211_ATTR_TX_RATES the set of allowed rates. * + * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames + * (via @NL80211_CMD_ACTION) for processing in userspace. This command + * requires an interface index and a match attribute containing the first + * few bytes of the frame that should match, e.g. a single byte for only + * a category match or four bytes for vendor frames including the OUI. + * The registration cannot be dropped, but is removed automatically + * when the netlink socket is closed. Multiple registrations can be made. + * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This + * command is used both as a request to transmit an Action frame and as an + * event indicating reception of an Action frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and + * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on + * which channel the frame is to be transmitted or was received. This + * channel has to be the current channel (remain-on-channel or the + * operational channel). When called, this operation returns a cookie + * (%NL80211_ATTR_COOKIE) that will be included with the TX status event + * pertaining to the TX request. + * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame + * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -387,6 +412,10 @@ enum nl80211_commands { NL80211_CMD_SET_TX_BITRATE_MASK, + NL80211_CMD_REGISTER_ACTION, + NL80211_CMD_ACTION, + NL80211_CMD_ACTION_TX_STATUS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -653,6 +682,12 @@ enum nl80211_commands { * rates based on negotiated supported rates information. This attribute * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -798,6 +833,10 @@ enum nl80211_attrs { NL80211_ATTR_TX_RATES, + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5b3569b2a74c..7188934b64d3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3,7 +3,7 @@ /* * 802.11 device and configuration interface * - * Copyright 2006-2009 Johannes Berg + * Copyright 2006-2010 Johannes Berg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -998,6 +998,7 @@ struct cfg80211_pmksa { * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. * This allows the operation to be terminated prior to timeout based on * the duration value. + * @action: Transmit an action frame * * @testmode_cmd: run a test mode command * @@ -1144,6 +1145,11 @@ struct cfg80211_ops { struct net_device *dev, u64 cookie); + int (*action)(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + const u8 *buf, size_t len, u64 *cookie); + /* some temporary stuff to finish wext */ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); @@ -1445,6 +1451,8 @@ struct cfg80211_cached_keys; * set by driver (if supported) on add_interface BEFORE registering the * netdev and may otherwise be used by driver read-only, will be update * by cfg80211 on change_interface + * @action_registrations: list of registrations for action frames + * @action_registrations_lock: lock for the list */ struct wireless_dev { struct wiphy *wiphy; @@ -1454,6 +1462,9 @@ struct wireless_dev { struct list_head list; struct net_device *netdev; + struct list_head action_registrations; + spinlock_t action_registrations_lock; + struct mutex mtx; struct work_struct cleanup_work; @@ -2291,4 +2302,38 @@ void cfg80211_remain_on_channel_expired(struct net_device *dev, void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo, gfp_t gfp); +/** + * cfg80211_rx_action - notification of received, unprocessed Action frame + * @dev: network device + * @freq: Frequency on which the frame was received in MHz + * @buf: Action frame (header + body) + * @len: length of the frame data + * @gfp: context flags + * Returns %true if a user space application is responsible for rejecting the + * unrecognized Action frame; %false if no such application is registered + * (i.e., the driver is responsible for rejecting the unrecognized Action + * frame) + * + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + */ +bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf, + size_t len, gfp_t gfp); + +/** + * cfg80211_action_tx_status - notification of TX status for Action frame + * @dev: network device + * @cookie: Cookie returned by cfg80211_ops::action() + * @buf: Action frame (header + body) + * @len: length of the frame data + * @ack: Whether frame was acknowledged + * @gfp: context flags + * + * This function is called whenever an Action frame was requested to be + * transmitted with cfg80211_ops::action() to report the TX status of the + * transmission attempt. + */ +void cfg80211_action_tx_status(struct net_device *dev, u64 cookie, + const u8 *buf, size_t len, bool ack, gfp_t gfp); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 314e98173166..80eb7cc42ce9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3,7 +3,7 @@ * * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc - * Copyright 2007-2008 Johannes Berg + * Copyright 2007-2010 Johannes Berg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -264,6 +264,9 @@ struct ieee80211_bss_conf { * be modified again (no seqno assignment, crypto, etc.) * @IEEE80211_TX_INTFL_HAS_RADIOTAP: This frame was injected and still * has a radiotap header at skb->data. + * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211 + * MLME command (internal to mac80211 to figure out whether to send TX + * status to user space) */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -286,6 +289,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), IEEE80211_TX_INTFL_HAS_RADIOTAP = BIT(20), + IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21), }; /** -- cgit v1.2.3 From fbc87d67af5ccd733f894273b215564c67e3a749 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Thu, 11 Feb 2010 17:56:06 -0500 Subject: Introduce PCMCIA_DEVICE_PROD_ID3 ...and use it in hostap_cs and orinoco_cs. Another PCMCIA device with Intersil Prism chipset has been reported: Socket 0: product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA" manfid: 0x02e0, 0x1011 function: 6 (network) As it's the case with some other Prism based devices, the third ID string contains a design name that should be sufficient to identify the card as having Intersil Prism chipset and thus compatible with both orinoco_cs and hostap_cs. Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only. Use it in orinoco_cs and hostap_cs to match cards with the third ID string indicating Prism chipset. Remove corresponding entries that use PCMCIA_DEVICE_PROD_ID123. Reported-by: Ozzy Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_cs.c | 17 ++++------------- drivers/net/wireless/orinoco/orinoco_cs.c | 9 ++++----- include/pcmcia/device_id.h | 5 +++++ 3 files changed, 13 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index c9640a3e02c9..d19748d90aaf 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -793,13 +793,6 @@ static struct pcmcia_device_id hostap_cs_ids[] = { 0x4b801a17), PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), - PCMCIA_DEVICE_PROD_ID123( - "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P", - 0x4b801a17, 0x6345a0bf, 0xc9049a39), - /* D-Link DWL-650 Rev. P1; manfid 0x000b, 0x7110 */ - PCMCIA_DEVICE_PROD_ID123( - "D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10", - 0x1a424a1c, 0x6ea57632, 0xdd97a26b), PCMCIA_DEVICE_PROD_ID123( "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02", 0xe6ec52ce, 0x08649af2, 0x4b74baa0), @@ -833,15 +826,13 @@ static struct pcmcia_device_id hostap_cs_ids[] = { "Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", "Ver. 1.00", 0x5cd01705, 0x4271660f, 0x9d08ee12), - PCMCIA_DEVICE_PROD_ID123( - "corega", "WL PCCL-11", "ISL37300P", - 0xa21501a, 0x59868926, 0xc9049a39), - PCMCIA_DEVICE_PROD_ID123( - "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", - 0xa5f472c2, 0x9c05598d, 0xc9049a39), PCMCIA_DEVICE_PROD_ID123( "Wireless LAN" , "11Mbps PC Card", "Version 01.02", 0x4b8870ff, 0x70e946d1, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), + PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), + PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), + PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), PCMCIA_DEVICE_NULL }; MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index f27bb8367c98..1d4ada188eda 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -407,7 +407,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), - PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), @@ -417,7 +416,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), - PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), @@ -432,7 +430,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), - PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), @@ -445,7 +442,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), - PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), @@ -454,8 +450,11 @@ static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), - PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092), + PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2), + PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b), + PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h index c33ea08352b8..63e5b8f6b7dd 100644 --- a/include/pcmcia/device_id.h +++ b/include/pcmcia/device_id.h @@ -34,6 +34,11 @@ .prod_id = { NULL, (v2), NULL, NULL }, \ .prod_id_hash = { 0, (vh2), 0, 0 }, } +#define PCMCIA_DEVICE_PROD_ID3(v3, vh3) { \ + .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID3, \ + .prod_id = { NULL, NULL, (v3), NULL }, \ + .prod_id_hash = { 0, 0, (vh3), 0 }, } + #define PCMCIA_DEVICE_PROD_ID12(v1, v2, vh1, vh2) { \ .match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \ PCMCIA_DEV_ID_MATCH_PROD_ID2, \ -- cgit v1.2.3 From ffb9eb3d8b450c22bbbc688c6b630141ac476fd9 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Wed, 17 Feb 2010 17:58:10 +0200 Subject: nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 ++++ include/net/cfg80211.h | 7 +-- net/wireless/core.c | 16 +++--- net/wireless/nl80211.c | 131 +++++++++++++++++++++++++++++++++++++++++++++ net/wireless/wext-compat.c | 10 ++-- 5 files changed, 159 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8e6384f8fda6..28ba20fda3e2 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -416,6 +416,9 @@ enum nl80211_commands { NL80211_CMD_ACTION, NL80211_CMD_ACTION_TX_STATUS, + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -837,6 +840,8 @@ enum nl80211_attrs { NL80211_ATTR_ACK, + NL80211_ATTR_PS_STATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1573,4 +1578,9 @@ enum nl80211_band { NL80211_BAND_5GHZ, }; +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7188934b64d3..3d134a1fb96b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1150,7 +1150,6 @@ struct cfg80211_ops { enum nl80211_channel_type channel_type, const u8 *buf, size_t len, u64 *cookie); - /* some temporary stuff to finish wext */ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); }; @@ -1489,6 +1488,9 @@ struct wireless_dev { struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *current_bss; /* associated / joined */ + bool ps; + int ps_timeout; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -1500,8 +1502,7 @@ struct wireless_dev { u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; s8 default_key, default_mgmt_key; - bool ps, prev_bssid_valid; - int ps_timeout; + bool prev_bssid_valid; } wext; #endif }; diff --git a/net/wireless/core.c b/net/wireless/core.c index 51908dc2ea00..7fdb9409ad2a 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -698,19 +698,21 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, wdev->wext.default_key = -1; wdev->wext.default_mgmt_key = -1; wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; +#endif + if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) - wdev->wext.ps = true; + wdev->ps = true; else - wdev->wext.ps = false; - wdev->wext.ps_timeout = 100; + wdev->ps = false; + wdev->ps_timeout = 100; if (rdev->ops->set_power_mgmt) if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, - wdev->wext.ps, - wdev->wext.ps_timeout)) { + wdev->ps, + wdev->ps_timeout)) { /* assume this means it's off */ - wdev->wext.ps = false; + wdev->ps = false; } -#endif + if (!dev->ethtool_ops) dev->ethtool_ops = &cfg80211_ethtool_ops; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 328112081358..b0495a1da22e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -148,6 +148,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { [NL80211_ATTR_FRAME] = { .type = NLA_BINARY, .len = IEEE80211_MAX_DATA_LEN }, [NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, }, + [NL80211_ATTR_PS_STATE] = { .type = NLA_U32 }, }; /* policy for the attributes */ @@ -4663,6 +4664,124 @@ unlock_rtnl: return err; } +static int nl80211_set_power_save(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev; + struct wireless_dev *wdev; + struct net_device *dev; + u8 ps_state; + bool state; + int err; + + if (!info->attrs[NL80211_ATTR_PS_STATE]) { + err = -EINVAL; + goto out; + } + + ps_state = nla_get_u32(info->attrs[NL80211_ATTR_PS_STATE]); + + if (ps_state != NL80211_PS_DISABLED && ps_state != NL80211_PS_ENABLED) { + err = -EINVAL; + goto out; + } + + rtnl_lock(); + + err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev); + if (err) + goto unlock_rdev; + + wdev = dev->ieee80211_ptr; + + if (!rdev->ops->set_power_mgmt) { + err = -EOPNOTSUPP; + goto unlock_rdev; + } + + state = (ps_state == NL80211_PS_ENABLED) ? true : false; + + if (state == wdev->ps) + goto unlock_rdev; + + wdev->ps = state; + + if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, wdev->ps, + wdev->ps_timeout)) + /* assume this means it's off */ + wdev->ps = false; + +unlock_rdev: + cfg80211_unlock_rdev(rdev); + dev_put(dev); + rtnl_unlock(); + +out: + return err; +} + +static int nl80211_get_power_save(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev; + enum nl80211_ps_state ps_state; + struct wireless_dev *wdev; + struct net_device *dev; + struct sk_buff *msg; + void *hdr; + int err; + + rtnl_lock(); + + err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev); + if (err) + goto unlock_rtnl; + + wdev = dev->ieee80211_ptr; + + if (!rdev->ops->set_power_mgmt) { + err = -EOPNOTSUPP; + goto out; + } + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + + hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0, + NL80211_CMD_GET_POWER_SAVE); + if (!hdr) { + err = -ENOMEM; + goto free_msg; + } + + if (wdev->ps) + ps_state = NL80211_PS_ENABLED; + else + ps_state = NL80211_PS_DISABLED; + + NLA_PUT_U32(msg, NL80211_ATTR_PS_STATE, ps_state); + + genlmsg_end(msg, hdr); + err = genlmsg_reply(msg, info); + goto out; + +nla_put_failure: + err = -ENOBUFS; + +free_msg: + nlmsg_free(msg); + +out: + cfg80211_unlock_rdev(rdev); + dev_put(dev); + +unlock_rtnl: + rtnl_unlock(); + + return err; +} + static struct genl_ops nl80211_ops[] = { { .cmd = NL80211_CMD_GET_WIPHY, @@ -4955,6 +5074,18 @@ static struct genl_ops nl80211_ops[] = { .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, }, + { + .cmd = NL80211_CMD_SET_POWER_SAVE, + .doit = nl80211_set_power_save, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, + { + .cmd = NL80211_CMD_GET_POWER_SAVE, + .doit = nl80211_get_power_save, + .policy = nl80211_policy, + /* can be retrieved by unprivileged users */ + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index b17eeae448d5..9ab51838849e 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -1099,8 +1099,8 @@ int cfg80211_wext_siwpower(struct net_device *dev, { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); - bool ps = wdev->wext.ps; - int timeout = wdev->wext.ps_timeout; + bool ps = wdev->ps; + int timeout = wdev->ps_timeout; int err; if (wdev->iftype != NL80211_IFTYPE_STATION) @@ -1133,8 +1133,8 @@ int cfg80211_wext_siwpower(struct net_device *dev, if (err) return err; - wdev->wext.ps = ps; - wdev->wext.ps_timeout = timeout; + wdev->ps = ps; + wdev->ps_timeout = timeout; return 0; @@ -1147,7 +1147,7 @@ int cfg80211_wext_giwpower(struct net_device *dev, { struct wireless_dev *wdev = dev->ieee80211_ptr; - wrq->disabled = !wdev->wext.ps; + wrq->disabled = !wdev->ps; return 0; } -- cgit v1.2.3