From 0c317a02ca982ca093e71bf07cb562265ba40032 Mon Sep 17 00:00:00 2001
From: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
Date: Wed, 12 Oct 2016 18:26:51 +0530
Subject: cfg80211: support virtual interfaces with different beacon intervals

This commit provides a mechanism for the host drivers to advertise the
support for different beacon intervals among the respective interface
combinations in a group, through NL80211_IFACE_COMB_BI_MIN_GCD (u32).

This value will be compared against GCD of all beaconing interfaces of
matching combinations.

If the driver doesn't advertise this value, the old behaviour where
all beacon intervals must be identical is retained.

If it is specified, then any beacon interval for an interface in the
interface combination as well as the GCD of all active beacon intervals
in the combination must be greater or equal to this value.

Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
[change commit message, some variable names, small other things]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/uapi/linux/nl80211.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'include/uapi/linux')

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 56368e9b4622..1362d24957b5 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4280,6 +4280,9 @@ enum nl80211_iface_limit_attrs {
  *	of supported channel widths for radar detection.
  * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
  *	of supported regulatory regions for radar detection.
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
+ *	different beacon intervals supported by all the interface combinations
+ *	in this group (if not present, all beacon intervals be identical).
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -4287,8 +4290,8 @@ enum nl80211_iface_limit_attrs {
  *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
  *	=> allows an AP and a STA that must match BIs
  *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- *	=> allows 8 of AP/GO
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
+ *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
  *
  *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
  *	=> allows two STAs on different channels
@@ -4314,6 +4317,7 @@ enum nl80211_if_combination_attrs {
 	NL80211_IFACE_COMB_NUM_CHANNELS,
 	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+	NL80211_IFACE_COMB_BI_MIN_GCD,
 
 	/* keep last */
 	NUM_NL80211_IFACE_COMB,
-- 
cgit v1.2.3


From 11b6b5a4ced2f2c76073b97ee08ca0eab8358fde Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Thu, 27 Oct 2016 00:41:58 +0300
Subject: cfg80211: Rename SAE_DATA to more generic AUTH_DATA

This adds defines and nl80211 extensions to allow FILS Authentication to
be implemented similarly to SAE. FILS does not need the special rules
for the Authentication transaction number and Status code fields, but it
does need to add non-IE fields. The previously used
NL80211_ATTR_SAE_DATA can be reused for this to avoid having to
duplicate that implementation. Rename that attribute to more generic
NL80211_ATTR_AUTH_DATA (with backwards compatibility define for
NL80211_SAE_DATA).

Also document the special rules related to the Authentication
transaction number and Status code fiels.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h       | 12 +++++++-----
 include/uapi/linux/nl80211.h | 15 ++++++++++++---
 net/mac80211/mlme.c          | 12 ++++++------
 net/wireless/core.h          |  2 +-
 net/wireless/mlme.c          |  6 +++---
 net/wireless/nl80211.c       | 18 +++++++++---------
 6 files changed, 38 insertions(+), 27 deletions(-)

(limited to 'include/uapi/linux')

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d1ffbc3a8e55..dffc265a4fd6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1785,9 +1785,11 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
  * @key_len: length of WEP key for shared key authentication
  * @key_idx: index of WEP key for shared key authentication
  * @key: WEP key for shared key authentication
- * @sae_data: Non-IE data to use with SAE or %NULL. This starts with
- *	Authentication transaction sequence number field.
- * @sae_data_len: Length of sae_data buffer in octets
+ * @auth_data: Fields and elements in Authentication frames. This contains
+ *	the authentication frame body (non-IE and IE data), excluding the
+ *	Authentication algorithm number, i.e., starting at the Authentication
+ *	transaction sequence number field.
+ * @auth_data_len: Length of auth_data buffer in octets
  */
 struct cfg80211_auth_request {
 	struct cfg80211_bss *bss;
@@ -1796,8 +1798,8 @@ struct cfg80211_auth_request {
 	enum nl80211_auth_type auth_type;
 	const u8 *key;
 	u8 key_len, key_idx;
-	const u8 *sae_data;
-	size_t sae_data_len;
+	const u8 *auth_data;
+	size_t auth_data_len;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1362d24957b5..18bcf44899aa 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1638,8 +1638,16 @@ enum nl80211_commands {
  *	the connection request from a station. nl80211_connect_failed_reason
  *	enum has different reasons of connection failure.
  *
- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
- *	with the Authentication transaction sequence number field.
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
+ *	This contains the authentication frame body (non-IE and IE data),
+ *	excluding the Authentication algorithm number, i.e., starting at the
+ *	Authentication transaction sequence number field. It is used with
+ *	authentication algorithms that need special fields to be added into
+ *	the frames (SAE and FILS). Currently, only the SAE cases use the
+ *	initial two fields (Authentication transaction sequence number and
+ *	Status code). However, those fields are included in the attribute data
+ *	for all authentication algorithms to keep the attribute definition
+ *	consistent.
  *
  * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -2195,7 +2203,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_CONN_FAILED_REASON,
 
-	NL80211_ATTR_SAE_DATA,
+	NL80211_ATTR_AUTH_DATA,
 
 	NL80211_ATTR_VHT_CAPABILITY,
 
@@ -2347,6 +2355,7 @@ enum nl80211_attrs {
 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
 #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c8d3a9b02fb6..32fd29581d4d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4483,20 +4483,20 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
 		return -EOPNOTSUPP;
 	}
 
-	auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
+	auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
 			    req->ie_len, GFP_KERNEL);
 	if (!auth_data)
 		return -ENOMEM;
 
 	auth_data->bss = req->bss;
 
-	if (req->sae_data_len >= 4) {
-		__le16 *pos = (__le16 *) req->sae_data;
+	if (req->auth_data_len >= 4) {
+		__le16 *pos = (__le16 *) req->auth_data;
 		auth_data->sae_trans = le16_to_cpu(pos[0]);
 		auth_data->sae_status = le16_to_cpu(pos[1]);
-		memcpy(auth_data->data, req->sae_data + 4,
-		       req->sae_data_len - 4);
-		auth_data->data_len += req->sae_data_len - 4;
+		memcpy(auth_data->data, req->auth_data + 4,
+		       req->auth_data_len - 4);
+		auth_data->data_len += req->auth_data_len - 4;
 	}
 
 	if (req->ie && req->ie_len) {
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 21e31888cfa9..fb2fcd5581fe 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -345,7 +345,7 @@ int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 		       const u8 *ssid, int ssid_len,
 		       const u8 *ie, int ie_len,
 		       const u8 *key, int key_len, int key_idx,
-		       const u8 *sae_data, int sae_data_len);
+		       const u8 *auth_data, int auth_data_len);
 int cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
 			struct net_device *dev,
 			struct ieee80211_channel *chan,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index cbb48e26a871..bd1f7a159d6a 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -204,14 +204,14 @@ int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 		       const u8 *ssid, int ssid_len,
 		       const u8 *ie, int ie_len,
 		       const u8 *key, int key_len, int key_idx,
-		       const u8 *sae_data, int sae_data_len)
+		       const u8 *auth_data, int auth_data_len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_auth_request req = {
 		.ie = ie,
 		.ie_len = ie_len,
-		.sae_data = sae_data,
-		.sae_data_len = sae_data_len,
+		.auth_data = auth_data,
+		.auth_data_len = auth_data_len,
 		.auth_type = auth_type,
 		.key = key,
 		.key_len = key_len,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7e746c90156e..704851142eed 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -357,7 +357,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_BG_SCAN_PERIOD] = { .type = NLA_U16 },
 	[NL80211_ATTR_WDEV] = { .type = NLA_U64 },
 	[NL80211_ATTR_USER_REG_HINT_TYPE] = { .type = NLA_U32 },
-	[NL80211_ATTR_SAE_DATA] = { .type = NLA_BINARY, },
+	[NL80211_ATTR_AUTH_DATA] = { .type = NLA_BINARY, },
 	[NL80211_ATTR_VHT_CAPABILITY] = { .len = NL80211_VHT_CAPABILITY_LEN },
 	[NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 },
 	[NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 },
@@ -7729,8 +7729,8 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
 	struct ieee80211_channel *chan;
-	const u8 *bssid, *ssid, *ie = NULL, *sae_data = NULL;
-	int err, ssid_len, ie_len = 0, sae_data_len = 0;
+	const u8 *bssid, *ssid, *ie = NULL, *auth_data = NULL;
+	int err, ssid_len, ie_len = 0, auth_data_len = 0;
 	enum nl80211_auth_type auth_type;
 	struct key_parse key;
 	bool local_state_change;
@@ -7811,16 +7811,16 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 
 	if (auth_type == NL80211_AUTHTYPE_SAE &&
-	    !info->attrs[NL80211_ATTR_SAE_DATA])
+	    !info->attrs[NL80211_ATTR_AUTH_DATA])
 		return -EINVAL;
 
-	if (info->attrs[NL80211_ATTR_SAE_DATA]) {
+	if (info->attrs[NL80211_ATTR_AUTH_DATA]) {
 		if (auth_type != NL80211_AUTHTYPE_SAE)
 			return -EINVAL;
-		sae_data = nla_data(info->attrs[NL80211_ATTR_SAE_DATA]);
-		sae_data_len = nla_len(info->attrs[NL80211_ATTR_SAE_DATA]);
+		auth_data = nla_data(info->attrs[NL80211_ATTR_AUTH_DATA]);
+		auth_data_len = nla_len(info->attrs[NL80211_ATTR_AUTH_DATA]);
 		/* need to include at least Auth Transaction and Status Code */
-		if (sae_data_len < 4)
+		if (auth_data_len < 4)
 			return -EINVAL;
 	}
 
@@ -7837,7 +7837,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	err = cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid,
 				 ssid, ssid_len, ie, ie_len,
 				 key.p.key, key.p.key_len, key.idx,
-				 sae_data, sae_data_len);
+				 auth_data, auth_data_len);
 	wdev_unlock(dev->ieee80211_ptr);
 	return err;
 }
-- 
cgit v1.2.3


From 60b8084e844814631b57da3d35f272e0ff799ab2 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Thu, 27 Oct 2016 00:42:00 +0300
Subject: cfg80211: Add feature flag for Fast Initial Link Setup (FILS) as STA

This defines a feature flag that drivers can use to indicate that they
support FILS authentication/association (IEEE 802.11ai) when using user
space SME (NL80211_CMD_AUTHENTICATE) in station mode.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/uapi/linux/nl80211.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'include/uapi/linux')

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 18bcf44899aa..7825fd4db19e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4647,6 +4647,8 @@ enum nl80211_feature_flags {
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
  *	configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
+ *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4661,6 +4663,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
 	NL80211_EXT_FEATURE_BEACON_RATE_HT,
 	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+	NL80211_EXT_FEATURE_FILS_STA,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
-- 
cgit v1.2.3


From 631810603a20874554b2f17adf42b72d0f15eda5 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Thu, 27 Oct 2016 00:42:02 +0300
Subject: cfg80211: Add Fast Initial Link Setup (FILS) auth algs

This defines authentication algorithms for FILS (IEEE 802.11ai).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h    |  3 +++
 include/uapi/linux/nl80211.h |  6 ++++++
 net/wireless/nl80211.c       | 21 +++++++++++++++++++--
 3 files changed, 28 insertions(+), 2 deletions(-)

(limited to 'include/uapi/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d428adf51446..793a0174ba29 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1576,6 +1576,9 @@ struct ieee80211_vht_operation {
 #define WLAN_AUTH_SHARED_KEY 1
 #define WLAN_AUTH_FT 2
 #define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_FILS_SK 4
+#define WLAN_AUTH_FILS_SK_PFS 5
+#define WLAN_AUTH_FILS_PK 6
 #define WLAN_AUTH_LEAP 128
 
 #define WLAN_AUTH_CHALLENGE_LEN 128
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 7825fd4db19e..4dc21265cd12 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3669,6 +3669,9 @@ enum nl80211_bss_status {
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
  * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -3681,6 +3684,9 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FT,
 	NL80211_AUTHTYPE_NETWORK_EAP,
 	NL80211_AUTHTYPE_SAE,
+	NL80211_AUTHTYPE_FILS_SK,
+	NL80211_AUTHTYPE_FILS_SK_PFS,
+	NL80211_AUTHTYPE_FILS_PK,
 
 	/* keep last */
 	__NL80211_AUTHTYPE_NUM,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 704851142eed..ff798620e929 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3778,12 +3778,23 @@ static bool nl80211_valid_auth_type(struct cfg80211_registered_device *rdev,
 		if (!(rdev->wiphy.features & NL80211_FEATURE_SAE) &&
 		    auth_type == NL80211_AUTHTYPE_SAE)
 			return false;
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+					     NL80211_EXT_FEATURE_FILS_STA) &&
+		    (auth_type == NL80211_AUTHTYPE_FILS_SK ||
+		     auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
+		     auth_type == NL80211_AUTHTYPE_FILS_PK))
+			return false;
 		return true;
 	case NL80211_CMD_CONNECT:
 	case NL80211_CMD_START_AP:
 		/* SAE not supported yet */
 		if (auth_type == NL80211_AUTHTYPE_SAE)
 			return false;
+		/* FILS not supported yet */
+		if (auth_type == NL80211_AUTHTYPE_FILS_SK ||
+		    auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
+		    auth_type == NL80211_AUTHTYPE_FILS_PK)
+			return false;
 		return true;
 	default:
 		return false;
@@ -7810,12 +7821,18 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	if (!nl80211_valid_auth_type(rdev, auth_type, NL80211_CMD_AUTHENTICATE))
 		return -EINVAL;
 
-	if (auth_type == NL80211_AUTHTYPE_SAE &&
+	if ((auth_type == NL80211_AUTHTYPE_SAE ||
+	     auth_type == NL80211_AUTHTYPE_FILS_SK ||
+	     auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
+	     auth_type == NL80211_AUTHTYPE_FILS_PK) &&
 	    !info->attrs[NL80211_ATTR_AUTH_DATA])
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_AUTH_DATA]) {
-		if (auth_type != NL80211_AUTHTYPE_SAE)
+		if (auth_type != NL80211_AUTHTYPE_SAE &&
+		    auth_type != NL80211_AUTHTYPE_FILS_SK &&
+		    auth_type != NL80211_AUTHTYPE_FILS_SK_PFS &&
+		    auth_type != NL80211_AUTHTYPE_FILS_PK)
 			return -EINVAL;
 		auth_data = nla_data(info->attrs[NL80211_ATTR_AUTH_DATA]);
 		auth_data_len = nla_len(info->attrs[NL80211_ATTR_AUTH_DATA]);
-- 
cgit v1.2.3


From 348bd456699801920a309c66e382380809fbdf41 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Thu, 27 Oct 2016 00:42:03 +0300
Subject: cfg80211: Add KEK/nonces for FILS association frames

The new nl80211 attributes can be used to provide KEK and nonces to
allow the driver to encrypt and decrypt FILS (Re)Association
Request/Response frames in station mode.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/linux/ieee80211.h    |  3 +++
 include/net/cfg80211.h       |  9 +++++++++
 include/uapi/linux/nl80211.h |  8 ++++++++
 net/wireless/nl80211.c       | 12 ++++++++++++
 4 files changed, 32 insertions(+)

(limited to 'include/uapi/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 793a0174ba29..fe849329511a 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2096,6 +2096,9 @@ enum ieee80211_key_len {
 #define IEEE80211_GCMP_MIC_LEN		16
 #define IEEE80211_GCMP_PN_LEN		6
 
+#define FILS_NONCE_LEN			16
+#define FILS_MAX_KEK_LEN		64
+
 /* Public action codes */
 enum ieee80211_pub_actioncode {
 	WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 8ca2e9f354f7..738b4d8a4666 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1840,6 +1840,12 @@ enum cfg80211_assoc_req_flags {
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
  * @vht_capa: VHT capability override
  * @vht_capa_mask: VHT capability mask indicating which fields to use
+ * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or
+ *	%NULL if FILS is not used.
+ * @fils_kek_len: Length of fils_kek in octets
+ * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
+ *	Request/Response frame or %NULL if FILS is not used. This field starts
+ *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -1851,6 +1857,9 @@ struct cfg80211_assoc_request {
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
 	struct ieee80211_vht_cap vht_capa, vht_capa_mask;
+	const u8 *fils_kek;
+	size_t fils_kek_len;
+	const u8 *fils_nonces;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 4dc21265cd12..a268a009528a 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1944,6 +1944,11 @@ enum nl80211_commands {
  *	attribute.
  * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
  *	See &enum nl80211_nan_match_attributes.
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
+ *	protection.
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
+ *	Request/Response frame protection. This attribute contains the 16 octet
+ *	STA Nonce followed by 16 octets of AP Nonce.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2344,6 +2349,9 @@ enum nl80211_attrs {
 	NL80211_ATTR_NAN_FUNC,
 	NL80211_ATTR_NAN_MATCH,
 
+	NL80211_ATTR_FILS_KEK,
+	NL80211_ATTR_FILS_NONCES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ff798620e929..667d5f719c22 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -414,6 +414,9 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_NAN_MASTER_PREF] = { .type = NLA_U8 },
 	[NL80211_ATTR_NAN_DUAL] = { .type = NLA_U8 },
 	[NL80211_ATTR_NAN_FUNC] = { .type = NLA_NESTED },
+	[NL80211_ATTR_FILS_KEK] = { .type = NLA_BINARY,
+				    .len = FILS_MAX_KEK_LEN },
+	[NL80211_ATTR_FILS_NONCES] = { .len = 2 * FILS_NONCE_LEN },
 };
 
 /* policy for the key attributes */
@@ -8033,6 +8036,15 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		req.flags |= ASSOC_REQ_USE_RRM;
 	}
 
+	if (info->attrs[NL80211_ATTR_FILS_KEK]) {
+		req.fils_kek = nla_data(info->attrs[NL80211_ATTR_FILS_KEK]);
+		req.fils_kek_len = nla_len(info->attrs[NL80211_ATTR_FILS_KEK]);
+		if (!info->attrs[NL80211_ATTR_FILS_NONCES])
+			return -EINVAL;
+		req.fils_nonces =
+			nla_data(info->attrs[NL80211_ATTR_FILS_NONCES]);
+	}
+
 	err = nl80211_crypto_settings(rdev, info, &req.crypto, 1);
 	if (!err) {
 		wdev_lock(dev->ieee80211_ptr);
-- 
cgit v1.2.3


From ce0ce13a1c89ff8b94b7f8fb32eb4c43e111c82e Mon Sep 17 00:00:00 2001
From: Michael Braun <michael-dev@fami-braun.de>
Date: Mon, 10 Oct 2016 19:12:22 +0200
Subject: cfg80211: configure multicast to unicast for AP interfaces

Add the ability to configure if an AP (and associated VLANs) will
do multicast-to-unicast conversion for ARP, IPv4 and IPv6 frames
(possibly within 802.1Q). If enabled, such frames are to be sent
to each station separately, with the DA replaced by their own MAC
address rather than the group address.

Note that this may break certain expectations of the receiver,
such as the ability to drop unicast IP packets received within
multicast L2 frames, or the ability to not send ICMP destination
unreachable messages for packets received in L2 multicast (which
is required, but the receiver can't tell the difference if this
new option is enabled.)

This also doesn't implement the 802.11 DMS (directed multicast
service).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
[fix disabling, add better documentation & commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h       |  6 ++++++
 include/uapi/linux/nl80211.h | 21 +++++++++++++++++++++
 net/wireless/nl80211.c       | 35 +++++++++++++++++++++++++++++++++++
 net/wireless/rdev-ops.h      | 12 ++++++++++++
 net/wireless/trace.h         | 19 +++++++++++++++++++
 5 files changed, 93 insertions(+)

(limited to 'include/uapi/linux')

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 738b4d8a4666..41ae3f500957 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2742,6 +2742,8 @@ struct cfg80211_nan_func {
  * @nan_change_conf: changes NAN configuration. The changed parameters must
  *	be specified in @changes (using &enum cfg80211_nan_conf_changes);
  *	All other parameters must be ignored.
+ *
+ * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3018,6 +3020,10 @@ struct cfg80211_ops {
 				   struct wireless_dev *wdev,
 				   struct cfg80211_nan_conf *conf,
 				   u32 changes);
+
+	int	(*set_multicast_to_unicast)(struct wiphy *wiphy,
+					    struct net_device *dev,
+					    const bool enabled);
 };
 
 /*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index a268a009528a..e21d23dcb588 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -600,6 +600,20 @@
  *
  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
  *
+ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+ *	multicast to unicast conversion. When enabled, all multicast packets
+ *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
+ *	will be sent out to each station once with the destination (multicast)
+ *	MAC address replaced by the station's MAC address. Note that this may
+ *	break certain expectations of the receiver, e.g. the ability to drop
+ *	unicast IP packets encapsulated in multicast L2 frames, or the ability
+ *	to not send destination unreachable messages in such cases.
+ *	This can only be toggled per BSS. Configure this on an interface of
+ *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
+ *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
+ *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
+ *	command, the feature is disabled.
+ *
  * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
  *	mesh config parameters may be given.
  * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
@@ -1069,6 +1083,8 @@ enum nl80211_commands {
 	NL80211_CMD_CHANGE_NAN_CONFIG,
 	NL80211_CMD_NAN_MATCH,
 
+	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1950,6 +1966,9 @@ enum nl80211_commands {
  *	Request/Response frame protection. This attribute contains the 16 octet
  *	STA Nonce followed by 16 octets of AP Nonce.
  *
+ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
+ *	packets should be send out as unicast to all stations (flag attribute).
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2352,6 +2371,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_FILS_KEK,
 	NL80211_ATTR_FILS_NONCES,
 
+	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 667d5f719c22..0c9d00c9cef1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -417,6 +417,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_FILS_KEK] = { .type = NLA_BINARY,
 				    .len = FILS_MAX_KEK_LEN },
 	[NL80211_ATTR_FILS_NONCES] = { .len = 2 * FILS_NONCE_LEN },
+	[NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED] = { .type = NLA_FLAG, },
 };
 
 /* policy for the key attributes */
@@ -1659,6 +1660,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			if (rdev->wiphy.features &
 					NL80211_FEATURE_SUPPORTS_WMM_ADMISSION)
 				CMD(add_tx_ts, ADD_TX_TS);
+			CMD(set_multicast_to_unicast, SET_MULTICAST_TO_UNICAST);
 		}
 #undef CMD
 
@@ -11766,6 +11768,31 @@ static int nl80211_tdls_cancel_channel_switch(struct sk_buff *skb,
 	return 0;
 }
 
+static int nl80211_set_multicast_to_unicast(struct sk_buff *skb,
+					    struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	const struct nlattr *nla;
+	bool enabled;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	if (!rdev->ops->set_multicast_to_unicast)
+		return -EOPNOTSUPP;
+
+	if (wdev->iftype != NL80211_IFTYPE_AP &&
+	    wdev->iftype != NL80211_IFTYPE_P2P_GO)
+		return -EOPNOTSUPP;
+
+	nla = info->attrs[NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED];
+	enabled = nla_get_flag(nla);
+
+	return rdev_set_multicast_to_unicast(rdev, dev, enabled);
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -12625,6 +12652,14 @@ static const struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+		.doit = nl80211_set_multicast_to_unicast,
+		.policy = nl80211_policy,
+		.flags = GENL_UNS_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 /* notification functions */
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 11cf83c8ad4f..e9ecf23e7942 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -562,6 +562,18 @@ static inline int rdev_set_wds_peer(struct cfg80211_registered_device *rdev,
 	return ret;
 }
 
+static inline int
+rdev_set_multicast_to_unicast(struct cfg80211_registered_device *rdev,
+			      struct net_device *dev,
+			      const bool enabled)
+{
+	int ret;
+	trace_rdev_set_multicast_to_unicast(&rdev->wiphy, dev, enabled);
+	ret = rdev->ops->set_multicast_to_unicast(&rdev->wiphy, dev, enabled);
+	trace_rdev_return_int(&rdev->wiphy, ret);
+	return ret;
+}
+
 static inline void rdev_rfkill_poll(struct cfg80211_registered_device *rdev)
 {
 	trace_rdev_rfkill_poll(&rdev->wiphy);
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index a3d0a91b1e09..25f8318b3e0b 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3030,6 +3030,25 @@ DEFINE_EVENT(wiphy_wdev_evt, rdev_abort_scan,
 	TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev),
 	TP_ARGS(wiphy, wdev)
 );
+
+TRACE_EVENT(rdev_set_multicast_to_unicast,
+	TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+		 const bool enabled),
+	TP_ARGS(wiphy, netdev, enabled),
+	TP_STRUCT__entry(
+		WIPHY_ENTRY
+		NETDEV_ENTRY
+		__field(bool, enabled)
+	),
+	TP_fast_assign(
+		WIPHY_ASSIGN;
+		NETDEV_ASSIGN;
+		__entry->enabled = enabled;
+	),
+	TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", unicast: %s",
+		  WIPHY_PR_ARG, NETDEV_PR_ARG,
+		  BOOL_TO_STR(__entry->enabled))
+);
 #endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
 
 #undef TRACE_INCLUDE_PATH
-- 
cgit v1.2.3


From 088e8df82f91a24728d49d9532cab7ebdee5117f Mon Sep 17 00:00:00 2001
From: vamsi krishna <vamsin@qti.qualcomm.com>
Date: Thu, 27 Oct 2016 16:51:11 +0300
Subject: cfg80211: Add support to update connection parameters

Add functionality to update the connection parameters when in connected
state, so that driver/firmware uses the updated parameters for
subsequent roaming. This is for drivers that support internal BSS
selection and roaming. The new command does not change the current
association state, i.e., it can be used to update IE contents for future
(re)associations without causing an immediate disassociation or
reassociation with the current BSS.

This commit implements the required functionality for updating IEs for
(Re)Association Request frame only. Other parameters can be added in
future when required.

Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/cfg80211.h       | 24 ++++++++++++++++++++++++
 include/uapi/linux/nl80211.h |  8 ++++++++
 net/wireless/nl80211.c       | 40 ++++++++++++++++++++++++++++++++++++++++
 net/wireless/rdev-ops.h      | 12 ++++++++++++
 net/wireless/trace.h         | 18 ++++++++++++++++++
 5 files changed, 102 insertions(+)

(limited to 'include/uapi/linux')

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 41ae3f500957..c575583b50fb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2050,6 +2050,18 @@ struct cfg80211_connect_params {
 	const u8 *prev_bssid;
 };
 
+/**
+ * enum cfg80211_connect_params_changed - Connection parameters being updated
+ *
+ * This enum provides information of all connect parameters that
+ * have to be updated as part of update_connect_params() call.
+ *
+ * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated
+ */
+enum cfg80211_connect_params_changed {
+	UPDATE_ASSOC_IES		= BIT(0),
+};
+
 /**
  * enum wiphy_params_flags - set_wiphy_params bitfield values
  * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
@@ -2571,6 +2583,14 @@ struct cfg80211_nan_func {
  *	cases, the result of roaming is indicated with a call to
  *	cfg80211_roamed() or cfg80211_roamed_bss().
  *	(invoked with the wireless_dev mutex held)
+ * @update_connect_params: Update the connect parameters while connected to a
+ *	BSS. The updated parameters can be used by driver/firmware for
+ *	subsequent BSS selection (roaming) decisions and to form the
+ *	Authentication/(Re)Association Request frames. This call does not
+ *	request an immediate disassociation or reassociation with the current
+ *	BSS, i.e., this impacts only subsequent (re)associations. The bits in
+ *	changed are defined in &enum cfg80211_connect_params_changed.
+ *	(invoked with the wireless_dev mutex held)
  * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if
  *      connection is in progress. Once done, call cfg80211_disconnected() in
  *      case connection was already established (invoked with the
@@ -2858,6 +2878,10 @@ struct cfg80211_ops {
 
 	int	(*connect)(struct wiphy *wiphy, struct net_device *dev,
 			   struct cfg80211_connect_params *sme);
+	int	(*update_connect_params)(struct wiphy *wiphy,
+					 struct net_device *dev,
+					 struct cfg80211_connect_params *sme,
+					 u32 changed);
 	int	(*disconnect)(struct wiphy *wiphy, struct net_device *dev,
 			      u16 reason_code);
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e21d23dcb588..259c9c77fdc1 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -888,6 +888,12 @@
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
  *
+ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
+ *	for subsequent roaming cases if the driver or firmware uses internal
+ *	BSS selection. This command can be issued only while connected and it
+ *	does not result in a change for the current association. Currently,
+ *	only the %NL80211_ATTR_IE data is used and updated with this command.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1085,6 +1091,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
 
+	NL80211_CMD_UPDATE_CONNECT_PARAMS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0c9d00c9cef1..bb30fa1969f9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1661,6 +1661,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 					NL80211_FEATURE_SUPPORTS_WMM_ADMISSION)
 				CMD(add_tx_ts, ADD_TX_TS);
 			CMD(set_multicast_to_unicast, SET_MULTICAST_TO_UNICAST);
+			CMD(update_connect_params, UPDATE_CONNECT_PARAMS);
 		}
 #undef CMD
 
@@ -8779,6 +8780,37 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+static int nl80211_update_connect_params(struct sk_buff *skb,
+					 struct genl_info *info)
+{
+	struct cfg80211_connect_params connect = {};
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	u32 changed = 0;
+	int ret;
+
+	if (!rdev->ops->update_connect_params)
+		return -EOPNOTSUPP;
+
+	if (info->attrs[NL80211_ATTR_IE]) {
+		if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+			return -EINVAL;
+		connect.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+		connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+		changed |= UPDATE_ASSOC_IES;
+	}
+
+	wdev_lock(dev->ieee80211_ptr);
+	if (!wdev->current_bss)
+		ret = -ENOLINK;
+	else
+		ret = rdev_update_connect_params(rdev, dev, &connect, changed);
+	wdev_unlock(dev->ieee80211_ptr);
+
+	return ret;
+}
+
 static int nl80211_disconnect(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -12231,6 +12263,14 @@ static const struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_UPDATE_CONNECT_PARAMS,
+		.doit = nl80211_update_connect_params,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 	{
 		.cmd = NL80211_CMD_DISCONNECT,
 		.doit = nl80211_disconnect,
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index e9ecf23e7942..2f425075ada8 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -490,6 +490,18 @@ static inline int rdev_connect(struct cfg80211_registered_device *rdev,
 	return ret;
 }
 
+static inline int
+rdev_update_connect_params(struct cfg80211_registered_device *rdev,
+			   struct net_device *dev,
+			   struct cfg80211_connect_params *sme, u32 changed)
+{
+	int ret;
+	trace_rdev_update_connect_params(&rdev->wiphy, dev, sme, changed);
+	ret = rdev->ops->update_connect_params(&rdev->wiphy, dev, sme, changed);
+	trace_rdev_return_int(&rdev->wiphy, ret);
+	return ret;
+}
+
 static inline int rdev_disconnect(struct cfg80211_registered_device *rdev,
 				  struct net_device *dev, u16 reason_code)
 {
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 25f8318b3e0b..ea1b47e04fa4 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1281,6 +1281,24 @@ TRACE_EVENT(rdev_connect,
 		  __entry->wpa_versions, __entry->flags, MAC_PR_ARG(prev_bssid))
 );
 
+TRACE_EVENT(rdev_update_connect_params,
+	TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+		 struct cfg80211_connect_params *sme, u32 changed),
+	TP_ARGS(wiphy, netdev, sme, changed),
+	TP_STRUCT__entry(
+		WIPHY_ENTRY
+		NETDEV_ENTRY
+		__field(u32, changed)
+	),
+	TP_fast_assign(
+		WIPHY_ASSIGN;
+		NETDEV_ASSIGN;
+		__entry->changed = changed;
+	),
+	TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", parameters changed: %u",
+		  WIPHY_PR_ARG, NETDEV_PR_ARG,  __entry->changed)
+);
+
 TRACE_EVENT(rdev_set_cqm_rssi_config,
 	TP_PROTO(struct wiphy *wiphy,
 		 struct net_device *netdev, s32 rssi_thold,
-- 
cgit v1.2.3