From eec8359f0797ef87c6ef6cbed6de08b02073b833 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 14 Jan 2025 14:28:44 +0000 Subject: net: ethtool: add support for configuring hds-thresh The hds-thresh option configures the threshold value of the header-data-split. If a received packet size is larger than this threshold value, a packet will be split into header and payload. The header indicates TCP and UDP header, but it depends on driver spec. The bnxt_en driver supports HDS(Header-Data-Split) configuration at FW level, affecting TCP and UDP too. So, If hds-thresh is set, it affects UDP and TCP packets. Example: # ethtool -G hds-thresh # ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256 # ethtool -g enp14s0f0np0 Ring parameters for enp14s0f0np0: Pre-set maximums: ... HDS thresh: 1023 Current hardware settings: ... TCP data split: on HDS thresh: 256 The default/min/max values are not defined in the ethtool so the drivers should define themself. The 0 value means that all TCP/UDP packets' header and payload will be split. Tested-by: Stanislav Fomichev Signed-off-by: Taehee Yoo Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski --- include/linux/ethtool.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index d79bd201c1c8..e4136b0df892 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -78,6 +78,9 @@ enum { * @cqe_size: Size of TX/RX completion queue event * @tx_push_buf_len: Size of TX push buffer * @tx_push_buf_max_len: Maximum allowed size of TX push buffer + * @hds_thresh: Packet size threshold for header data split (HDS) + * @hds_thresh_max: Maximum supported setting for @hds_threshold + * */ struct kernel_ethtool_ringparam { u32 rx_buf_len; @@ -87,6 +90,8 @@ struct kernel_ethtool_ringparam { u32 cqe_size; u32 tx_push_buf_len; u32 tx_push_buf_max_len; + u32 hds_thresh; + u32 hds_thresh_max; }; /** @@ -97,6 +102,7 @@ struct kernel_ethtool_ringparam { * @ETHTOOL_RING_USE_RX_PUSH: capture for setting rx_push * @ETHTOOL_RING_USE_TX_PUSH_BUF_LEN: capture for setting tx_push_buf_len * @ETHTOOL_RING_USE_TCP_DATA_SPLIT: capture for setting tcp_data_split + * @ETHTOOL_RING_USE_HDS_THRS: capture for setting header-data-split-thresh */ enum ethtool_supported_ring_param { ETHTOOL_RING_USE_RX_BUF_LEN = BIT(0), @@ -105,6 +111,7 @@ enum ethtool_supported_ring_param { ETHTOOL_RING_USE_RX_PUSH = BIT(3), ETHTOOL_RING_USE_TX_PUSH_BUF_LEN = BIT(4), ETHTOOL_RING_USE_TCP_DATA_SPLIT = BIT(5), + ETHTOOL_RING_USE_HDS_THRS = BIT(6), }; #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit)) @@ -1157,6 +1164,7 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev, * @rss_ctx: XArray of custom RSS contexts * @rss_lock: Protects entries in @rss_ctx. May be taken from * within RTNL. + * @hds_thresh: HDS Threshold value. * @hds_config: HDS value from userspace. * @wol_enabled: Wake-on-LAN is enabled * @module_fw_flash_in_progress: Module firmware flashing is in progress. @@ -1164,6 +1172,7 @@ int ethtool_virtdev_set_link_ksettings(struct net_device *dev, struct ethtool_netdev_state { struct xarray rss_ctx; struct mutex rss_lock; + u32 hds_thresh; u8 hds_config; unsigned wol_enabled:1; unsigned module_fw_flash_in_progress:1; -- cgit v1.2.3