From 3d5afd324a4bf9f64f59599bf1e93cd7dd1dc97a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 27 Oct 2008 12:16:15 +0100 Subject: HID: fix oops during suspend of unbound HID devices Usbhid structure is allocated on start invoked only from probe of some driver. When there is no driver, the structure is null and causes null-dereference oopses. Fix it by allocating the structure on probe and disconnect of the device itself. Also make sure we won't race between start and resume or stop and suspend respectively. References: http://bugzilla.kernel.org/show_bug.cgi?id=11827 Signed-off-by: Jiri Slaby Cc: Johannes Berg Cc: Andreas Schwab Signed-off-by: Jiri Kosina --- include/linux/hid.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 5355ca4b939e..e5780f8c934a 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -410,6 +410,7 @@ struct hid_output_fifo { #define HID_SUSPENDED 5 #define HID_CLEAR_HALT 6 #define HID_DISCONNECTED 7 +#define HID_STARTED 8 struct hid_input { struct list_head list; -- cgit v1.2.3 From 8175fe2dda1c93a9c596921c8ed4a0b4baccdefe Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sun, 26 Oct 2008 00:30:18 +0200 Subject: HID: fix hid_device_id for cross compiling struct hid_device_id contains hidden padding which is bad for cross compiling. Make the padding explicit and consistent across architectures. Signed-off-by: Andreas Schwab Signed-off-by: Jiri Kosina --- include/linux/mod_devicetable.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index eb71b45fdf5a..97b91d1abb43 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -135,6 +135,7 @@ struct usb_device_id { struct hid_device_id { __u16 bus; + __u16 pad1; __u32 vendor; __u32 product; kernel_ulong_t driver_data -- cgit v1.2.3 From 3f5e26cee443eb4d3900cd3085664c3e51b72135 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Oct 2008 15:02:51 -0700 Subject: adjust init section definitions Add rodata equivalents for assembly use, and fix the section attributes used by __REFCONST. Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- include/linux/init.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 0c1264668be0..68cb0265d009 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -112,21 +112,25 @@ #define __FINIT .previous #define __INITDATA .section ".init.data","aw" +#define __INITRODATA .section ".init.rodata","a" #define __FINITDATA .previous #define __DEVINIT .section ".devinit.text", "ax" #define __DEVINITDATA .section ".devinit.data", "aw" +#define __DEVINITRODATA .section ".devinit.rodata", "a" #define __CPUINIT .section ".cpuinit.text", "ax" #define __CPUINITDATA .section ".cpuinit.data", "aw" +#define __CPUINITRODATA .section ".cpuinit.rodata", "a" #define __MEMINIT .section ".meminit.text", "ax" #define __MEMINITDATA .section ".meminit.data", "aw" +#define __MEMINITRODATA .section ".meminit.rodata", "a" /* silence warnings when references are OK */ #define __REF .section ".ref.text", "ax" #define __REFDATA .section ".ref.data", "aw" -#define __REFCONST .section ".ref.rodata", "aw" +#define __REFCONST .section ".ref.rodata", "a" #ifndef __ASSEMBLY__ /* -- cgit v1.2.3 From 0833422274ff00729a603b020fac297e69a03e40 Mon Sep 17 00:00:00 2001 From: Kurt Garloff Date: Wed, 29 Oct 2008 14:00:48 -0700 Subject: mm: increase the default mlock limit from 32k to 64k By default, non-privileged tasks can only mlock() a small amount of memory to avoid a DoS attack by ordinary users. The Linux kernel defaulted to 32k (on a 4k page size system) to accommodate the needs of gpg. However, newer gpg2 needs 64k in various circumstances and otherwise fails miserably, see bnc#329675. Change the default to 64k, and make it more agnostic to PAGE_SIZE. Signed-off-by: Kurt Garloff Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/resource.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/resource.h b/include/linux/resource.h index aaa423a6f3d9..40fc7e626082 100644 --- a/include/linux/resource.h +++ b/include/linux/resource.h @@ -59,10 +59,10 @@ struct rlimit { #define _STK_LIM (8*1024*1024) /* - * GPG wants 32kB of mlocked memory, to make sure pass phrases + * GPG2 wants 64kB of mlocked memory, to make sure pass phrases * and other sensitive information are never written to disk. */ -#define MLOCK_LIMIT (8 * PAGE_SIZE) +#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) /* * Due to binary compatibility, the actual resource numbers -- cgit v1.2.3 From 00c2e63c31d0f431952ff2a671c5c6997dd4f8b2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 29 Oct 2008 14:00:53 -0700 Subject: freezer_cg: use thaw_process() in unfreeze_cgroup() Don't duplicate the implementation of thaw_process(). [akpm@linux-foundation.org: make __thaw_process() static] Signed-off-by: Li Zefan Cc: Cedric Le Goater Acked-by: Matt Helsley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/freezer.h | 5 ----- kernel/cgroup_freezer.c | 15 ++++----------- kernel/freezer.c | 20 ++++++++++---------- 3 files changed, 14 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 8f225339eee9..5a361f85cfec 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -44,11 +44,6 @@ static inline bool should_send_signal(struct task_struct *p) return !(p->flags & PF_FREEZER_NOSIG); } -/* - * Wake up a frozen process - */ -extern int __thaw_process(struct task_struct *p); - /* Takes and releases task alloc lock using task_lock() */ extern int thaw_process(struct task_struct *p); diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index e9c856a265c9..5e6d26b66e88 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -275,25 +275,18 @@ static int try_to_freeze_cgroup(struct cgroup *cgroup, struct freezer *freezer) return num_cant_freeze_now ? -EBUSY : 0; } -static int unfreeze_cgroup(struct cgroup *cgroup, struct freezer *freezer) +static void unfreeze_cgroup(struct cgroup *cgroup, struct freezer *freezer) { struct cgroup_iter it; struct task_struct *task; cgroup_iter_start(cgroup, &it); while ((task = cgroup_iter_next(cgroup, &it))) { - int do_wake; - - task_lock(task); - do_wake = __thaw_process(task); - task_unlock(task); - if (do_wake) - wake_up_process(task); + thaw_process(task); } cgroup_iter_end(cgroup, &it); - freezer->state = CGROUP_THAWED; - return 0; + freezer->state = CGROUP_THAWED; } static int freezer_change_state(struct cgroup *cgroup, @@ -320,7 +313,7 @@ static int freezer_change_state(struct cgroup *cgroup, } /* state == FREEZING and goal_state == THAWED, so unfreeze */ case CGROUP_FROZEN: - retval = unfreeze_cgroup(cgroup, freezer); + unfreeze_cgroup(cgroup, freezer); break; default: break; diff --git a/kernel/freezer.c b/kernel/freezer.c index ba6248b323ef..2f4936cf7083 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -121,16 +121,7 @@ void cancel_freezing(struct task_struct *p) } } -/* - * Wake up a frozen process - * - * task_lock() is needed to prevent the race with refrigerator() which may - * occur if the freezing of tasks fails. Namely, without the lock, if the - * freezing of tasks failed, thaw_tasks() might have run before a task in - * refrigerator() could call frozen_process(), in which case the task would be - * frozen and no one would thaw it. - */ -int __thaw_process(struct task_struct *p) +static int __thaw_process(struct task_struct *p) { if (frozen(p)) { p->flags &= ~PF_FROZEN; @@ -140,6 +131,15 @@ int __thaw_process(struct task_struct *p) return 0; } +/* + * Wake up a frozen process + * + * task_lock() is needed to prevent the race with refrigerator() which may + * occur if the freezing of tasks fails. Namely, without the lock, if the + * freezing of tasks failed, thaw_tasks() might have run before a task in + * refrigerator() could call frozen_process(), in which case the task would be + * frozen and no one would thaw it. + */ int thaw_process(struct task_struct *p) { task_lock(p); -- cgit v1.2.3 From 9b913735e53ab0da4a792bac0de8e178cc13dcfb Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 29 Oct 2008 14:00:54 -0700 Subject: cgroups: tiny cleanups - remove 'private' field from struct subsys - remove cgroup_init_smp() Signed-off-by: Li Zefan Acked-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 8b00f6643e93..1164963c3a85 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -25,7 +25,6 @@ struct cgroup; extern int cgroup_init_early(void); extern int cgroup_init(void); -extern void cgroup_init_smp(void); extern void cgroup_lock(void); extern bool cgroup_lock_live_group(struct cgroup *cgrp); extern void cgroup_unlock(void); @@ -348,8 +347,6 @@ struct cgroup_subsys { struct cgroupfs_root *root; struct list_head sibling; - - void *private; }; #define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys; @@ -410,7 +407,6 @@ void cgroup_mm_owner_callbacks(struct task_struct *old, static inline int cgroup_init_early(void) { return 0; } static inline int cgroup_init(void) { return 0; } -static inline void cgroup_init_smp(void) {} static inline void cgroup_fork(struct task_struct *p) {} static inline void cgroup_fork_callbacks(struct task_struct *p) {} static inline void cgroup_post_fork(struct task_struct *p) {} -- cgit v1.2.3 From 4e02ed4b4a2fae34aae766a5bb93ae235f60adb8 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 29 Oct 2008 14:00:55 -0700 Subject: fs: remove prepare_write/commit_write Nothing uses prepare_write or commit_write. Remove them from the tree completely. [akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting] Signed-off-by: Nick Piggin Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 12 +- Documentation/filesystems/vfs.txt | 39 +----- drivers/block/loop.c | 5 +- fs/fat/inode.c | 2 +- fs/libfs.c | 2 +- fs/ocfs2/file.c | 3 +- fs/splice.c | 4 +- include/linux/fs.h | 7 -- mm/filemap.c | 242 +------------------------------------- 9 files changed, 23 insertions(+), 293 deletions(-) (limited to 'include/linux') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 8362860e21a7..23d2f4460deb 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -161,8 +161,12 @@ prototypes: int (*set_page_dirty)(struct page *page); int (*readpages)(struct file *filp, struct address_space *mapping, struct list_head *pages, unsigned nr_pages); - int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); - int (*commit_write)(struct file *, struct page *, unsigned, unsigned); + int (*write_begin)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata); + int (*write_end)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata); sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); int (*releasepage) (struct page *, int); @@ -180,8 +184,6 @@ sync_page: no maybe writepages: no set_page_dirty no no readpages: no -prepare_write: no yes yes -commit_write: no yes yes write_begin: no locks the page yes write_end: no yes, unlocks yes perform_write: no n/a yes @@ -191,7 +193,7 @@ releasepage: no yes direct_IO: no launder_page: no yes - ->prepare_write(), ->commit_write(), ->sync_page() and ->readpage() + ->write_begin(), ->write_end(), ->sync_page() and ->readpage() may be called from the request handler (/dev/loop). ->readpage() unlocks the page, either synchronously or via I/O diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index c4d348dabe94..5579bda58a6d 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -492,7 +492,7 @@ written-back to storage typically in whole pages, however the address_space has finer control of write sizes. The read process essentially only requires 'readpage'. The write -process is more complicated and uses prepare_write/commit_write or +process is more complicated and uses write_begin/write_end or set_page_dirty to write data into the address_space, and writepage, sync_page, and writepages to writeback data to storage. @@ -521,8 +521,6 @@ struct address_space_operations { int (*set_page_dirty)(struct page *page); int (*readpages)(struct file *filp, struct address_space *mapping, struct list_head *pages, unsigned nr_pages); - int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); - int (*commit_write)(struct file *, struct page *, unsigned, unsigned); int (*write_begin)(struct file *, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata); @@ -598,37 +596,7 @@ struct address_space_operations { readpages is only used for read-ahead, so read errors are ignored. If anything goes wrong, feel free to give up. - prepare_write: called by the generic write path in VM to set up a write - request for a page. This indicates to the address space that - the given range of bytes is about to be written. The - address_space should check that the write will be able to - complete, by allocating space if necessary and doing any other - internal housekeeping. If the write will update parts of - any basic-blocks on storage, then those blocks should be - pre-read (if they haven't been read already) so that the - updated blocks can be written out properly. - The page will be locked. - - Note: the page _must not_ be marked uptodate in this function - (or anywhere else) unless it actually is uptodate right now. As - soon as a page is marked uptodate, it is possible for a concurrent - read(2) to copy it to userspace. - - commit_write: If prepare_write succeeds, new data will be copied - into the page and then commit_write will be called. It will - typically update the size of the file (if appropriate) and - mark the inode as dirty, and do any other related housekeeping - operations. It should avoid returning an error if possible - - errors should have been handled by prepare_write. - - write_begin: This is intended as a replacement for prepare_write. The - key differences being that: - - it returns a locked page (in *pagep) rather than being - given a pre locked page; - - it must be able to cope with short writes (where the - length passed to write_begin is greater than the number - of bytes copied into the page). - + write_begin: Called by the generic buffered write code to ask the filesystem to prepare to write len bytes at the given offset in the file. The address_space should check that the write will be able to complete, @@ -640,6 +608,9 @@ struct address_space_operations { The filesystem must return the locked pagecache page for the specified offset, in *pagep, for the caller to write into. + It must be able to cope with short writes (where the length passed to + write_begin is greater than the number of bytes copied into the page). + flags is a field for AOP_FLAG_xxx flags, described in include/linux/fs.h. diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3f09cd8bcc38..5c4ee70d5cf3 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -40,8 +40,7 @@ * Heinz Mauelshagen , Feb 2002 * * Support for falling back on the write file operation when the address space - * operations prepare_write and/or commit_write are not available on the - * backing filesystem. + * operations write_begin is not available on the backing filesystem. * Anton Altaparmakov, 16 Feb 2005 * * Still To Fix: @@ -765,7 +764,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, */ if (!file->f_op->splice_read) goto out_putf; - if (aops->prepare_write || aops->write_begin) + if (aops->write_begin) lo_flags |= LO_FLAGS_USE_AOPS; if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write) lo_flags |= LO_FLAGS_READ_ONLY; diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 19eafbe3c379..2b2eec1283bf 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -175,7 +175,7 @@ static ssize_t fat_direct_IO(int rw, struct kiocb *iocb, if (rw == WRITE) { /* - * FIXME: blockdev_direct_IO() doesn't use ->prepare_write(), + * FIXME: blockdev_direct_IO() doesn't use ->write_begin(), * so we need to update the ->mmu_private to block boundary. * * But we must fill the remaining area or hole by nul for diff --git a/fs/libfs.c b/fs/libfs.c index 74688598bcf7..e960a8321902 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -814,7 +814,7 @@ EXPORT_SYMBOL(simple_getattr); EXPORT_SYMBOL(simple_link); EXPORT_SYMBOL(simple_lookup); EXPORT_SYMBOL(simple_pin_fs); -EXPORT_SYMBOL(simple_prepare_write); +EXPORT_UNUSED_SYMBOL(simple_prepare_write); EXPORT_SYMBOL(simple_readpage); EXPORT_SYMBOL(simple_release_fs); EXPORT_SYMBOL(simple_rename); diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8d3225a78073..7efe937a415f 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -679,8 +679,7 @@ leave: /* Some parts of this taken from generic_cont_expand, which turned out * to be too fragile to do exactly what we need without us having to - * worry about recursive locking in ->prepare_write() and - * ->commit_write(). */ + * worry about recursive locking in ->write_begin() and ->write_end(). */ static int ocfs2_write_zero_page(struct inode *inode, u64 size) { diff --git a/fs/splice.c b/fs/splice.c index a1e701c27156..1abab5cee4ba 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -731,8 +731,8 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, }; /* - * The actor worker might be calling ->prepare_write and - * ->commit_write. Most of the time, these expect i_mutex to + * The actor worker might be calling ->write_begin and + * ->write_end. Most of the time, these expect i_mutex to * be held. Since this may result in an ABBA deadlock with * pipe->inode, we have to order lock acquiry here. */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 5b248d61430c..0dcdd9458f4b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -489,13 +489,6 @@ struct address_space_operations { int (*readpages)(struct file *filp, struct address_space *mapping, struct list_head *pages, unsigned nr_pages); - /* - * ext3 requires that a successful prepare_write() call be followed - * by a commit_write() call - they must be balanced - */ - int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); - int (*commit_write)(struct file *, struct page *, unsigned, unsigned); - int (*write_begin)(struct file *, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, struct page **pagep, void **fsdata); diff --git a/mm/filemap.c b/mm/filemap.c index ab8553658af3..f3e5f8944d17 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2029,48 +2029,8 @@ int pagecache_write_begin(struct file *file, struct address_space *mapping, { const struct address_space_operations *aops = mapping->a_ops; - if (aops->write_begin) { - return aops->write_begin(file, mapping, pos, len, flags, + return aops->write_begin(file, mapping, pos, len, flags, pagep, fsdata); - } else { - int ret; - pgoff_t index = pos >> PAGE_CACHE_SHIFT; - unsigned offset = pos & (PAGE_CACHE_SIZE - 1); - struct inode *inode = mapping->host; - struct page *page; -again: - page = __grab_cache_page(mapping, index); - *pagep = page; - if (!page) - return -ENOMEM; - - if (flags & AOP_FLAG_UNINTERRUPTIBLE && !PageUptodate(page)) { - /* - * There is no way to resolve a short write situation - * for a !Uptodate page (except by double copying in - * the caller done by generic_perform_write_2copy). - * - * Instead, we have to bring it uptodate here. - */ - ret = aops->readpage(file, page); - page_cache_release(page); - if (ret) { - if (ret == AOP_TRUNCATED_PAGE) - goto again; - return ret; - } - goto again; - } - - ret = aops->prepare_write(file, page, offset, offset+len); - if (ret) { - unlock_page(page); - page_cache_release(page); - if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); - } - return ret; - } } EXPORT_SYMBOL(pagecache_write_begin); @@ -2079,32 +2039,9 @@ int pagecache_write_end(struct file *file, struct address_space *mapping, struct page *page, void *fsdata) { const struct address_space_operations *aops = mapping->a_ops; - int ret; - - if (aops->write_end) { - mark_page_accessed(page); - ret = aops->write_end(file, mapping, pos, len, copied, - page, fsdata); - } else { - unsigned offset = pos & (PAGE_CACHE_SIZE - 1); - struct inode *inode = mapping->host; - - flush_dcache_page(page); - ret = aops->commit_write(file, page, offset, offset+len); - unlock_page(page); - mark_page_accessed(page); - page_cache_release(page); - - if (ret < 0) { - if (pos + len > inode->i_size) - vmtruncate(inode, inode->i_size); - } else if (ret > 0) - ret = min_t(size_t, copied, ret); - else - ret = copied; - } - return ret; + mark_page_accessed(page); + return aops->write_end(file, mapping, pos, len, copied, page, fsdata); } EXPORT_SYMBOL(pagecache_write_end); @@ -2226,174 +2163,6 @@ repeat: } EXPORT_SYMBOL(__grab_cache_page); -static ssize_t generic_perform_write_2copy(struct file *file, - struct iov_iter *i, loff_t pos) -{ - struct address_space *mapping = file->f_mapping; - const struct address_space_operations *a_ops = mapping->a_ops; - struct inode *inode = mapping->host; - long status = 0; - ssize_t written = 0; - - do { - struct page *src_page; - struct page *page; - pgoff_t index; /* Pagecache index for current page */ - unsigned long offset; /* Offset into pagecache page */ - unsigned long bytes; /* Bytes to write to page */ - size_t copied; /* Bytes copied from user */ - - offset = (pos & (PAGE_CACHE_SIZE - 1)); - index = pos >> PAGE_CACHE_SHIFT; - bytes = min_t(unsigned long, PAGE_CACHE_SIZE - offset, - iov_iter_count(i)); - - /* - * a non-NULL src_page indicates that we're doing the - * copy via get_user_pages and kmap. - */ - src_page = NULL; - - /* - * Bring in the user page that we will copy from _first_. - * Otherwise there's a nasty deadlock on copying from the - * same page as we're writing to, without it being marked - * up-to-date. - * - * Not only is this an optimisation, but it is also required - * to check that the address is actually valid, when atomic - * usercopies are used, below. - */ - if (unlikely(iov_iter_fault_in_readable(i, bytes))) { - status = -EFAULT; - break; - } - - page = __grab_cache_page(mapping, index); - if (!page) { - status = -ENOMEM; - break; - } - - /* - * non-uptodate pages cannot cope with short copies, and we - * cannot take a pagefault with the destination page locked. - * So pin the source page to copy it. - */ - if (!PageUptodate(page) && !segment_eq(get_fs(), KERNEL_DS)) { - unlock_page(page); - - src_page = alloc_page(GFP_KERNEL); - if (!src_page) { - page_cache_release(page); - status = -ENOMEM; - break; - } - - /* - * Cannot get_user_pages with a page locked for the - * same reason as we can't take a page fault with a - * page locked (as explained below). - */ - copied = iov_iter_copy_from_user(src_page, i, - offset, bytes); - if (unlikely(copied == 0)) { - status = -EFAULT; - page_cache_release(page); - page_cache_release(src_page); - break; - } - bytes = copied; - - lock_page(page); - /* - * Can't handle the page going uptodate here, because - * that means we would use non-atomic usercopies, which - * zero out the tail of the page, which can cause - * zeroes to become transiently visible. We could just - * use a non-zeroing copy, but the APIs aren't too - * consistent. - */ - if (unlikely(!page->mapping || PageUptodate(page))) { - unlock_page(page); - page_cache_release(page); - page_cache_release(src_page); - continue; - } - } - - status = a_ops->prepare_write(file, page, offset, offset+bytes); - if (unlikely(status)) - goto fs_write_aop_error; - - if (!src_page) { - /* - * Must not enter the pagefault handler here, because - * we hold the page lock, so we might recursively - * deadlock on the same lock, or get an ABBA deadlock - * against a different lock, or against the mmap_sem - * (which nests outside the page lock). So increment - * preempt count, and use _atomic usercopies. - * - * The page is uptodate so we are OK to encounter a - * short copy: if unmodified parts of the page are - * marked dirty and written out to disk, it doesn't - * really matter. - */ - pagefault_disable(); - copied = iov_iter_copy_from_user_atomic(page, i, - offset, bytes); - pagefault_enable(); - } else { - void *src, *dst; - src = kmap_atomic(src_page, KM_USER0); - dst = kmap_atomic(page, KM_USER1); - memcpy(dst + offset, src + offset, bytes); - kunmap_atomic(dst, KM_USER1); - kunmap_atomic(src, KM_USER0); - copied = bytes; - } - flush_dcache_page(page); - - status = a_ops->commit_write(file, page, offset, offset+bytes); - if (unlikely(status < 0)) - goto fs_write_aop_error; - if (unlikely(status > 0)) /* filesystem did partial write */ - copied = min_t(size_t, copied, status); - - unlock_page(page); - mark_page_accessed(page); - page_cache_release(page); - if (src_page) - page_cache_release(src_page); - - iov_iter_advance(i, copied); - pos += copied; - written += copied; - - balance_dirty_pages_ratelimited(mapping); - cond_resched(); - continue; - -fs_write_aop_error: - unlock_page(page); - page_cache_release(page); - if (src_page) - page_cache_release(src_page); - - /* - * prepare_write() may have instantiated a few blocks - * outside i_size. Trim these off again. Don't need - * i_size_read because we hold i_mutex. - */ - if (pos + bytes > inode->i_size) - vmtruncate(inode, inode->i_size); - break; - } while (iov_iter_count(i)); - - return written ? written : status; -} - static ssize_t generic_perform_write(struct file *file, struct iov_iter *i, loff_t pos) { @@ -2494,10 +2263,7 @@ generic_file_buffered_write(struct kiocb *iocb, const struct iovec *iov, struct iov_iter i; iov_iter_init(&i, iov, nr_segs, count, written); - if (a_ops->write_begin) - status = generic_perform_write(file, &i, pos); - else - status = generic_perform_write_2copy(file, &i, pos); + status = generic_perform_write(file, &i, pos); if (likely(status >= 0)) { written += status; -- cgit v1.2.3 From 7106a27b52940085c2c3f6e42742d3a2a84d872a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 14:01:15 -0700 Subject: kernel.h: fix might_sleep kernel-doc Put the kernel-doc for might_sleep() _immediately_ before the macro (no intervening lines). Otherwise kernel-doc complains like so: Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'file' Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'line' because kernel-doc is looking at the wrong function prototype (i.e., __might_sleep). [Yes, I have a todo note to myself to check/warn for that inconsistency in scripts/kernel-doc.] Signed-off-by: Randy Dunlap Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 396a350b87a6..fba141d3ca07 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -116,6 +116,8 @@ extern int _cond_resched(void); # define might_resched() do { } while (0) #endif +#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP + void __might_sleep(char *file, int line); /** * might_sleep - annotation for functions that can sleep * @@ -126,8 +128,6 @@ extern int _cond_resched(void); * be bitten later when the calling function happens to sleep when it is not * supposed to. */ -#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP - void __might_sleep(char *file, int line); # define might_sleep() \ do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0) #else -- cgit v1.2.3 From 731572d39fcd3498702eda4600db4c43d51e0b26 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 29 Oct 2008 14:01:20 -0700 Subject: nfsd: fix vm overcommit crash Junjiro R. Okajima reported a problem where knfsd crashes if you are using it to export shmemfs objects and run strict overcommit. In this situation the current->mm based modifier to the overcommit goes through a NULL pointer. We could simply check for NULL and skip the modifier but we've caught other real bugs in the past from mm being NULL here - cases where we did need a valid mm set up (eg the exec bug about a year ago). To preserve the checks and get the logic we want shuffle the checking around and add a new helper to the vm_ security wrappers Also fix a current->mm reference in nommu that should use the passed mm [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix build] Reported-by: Junjiro R. Okajima Acked-by: James Morris Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/security.h | 6 ++++++ mm/mmap.c | 3 ++- mm/nommu.c | 3 ++- mm/shmem.c | 8 ++++---- security/security.c | 9 +++++++++ 5 files changed, 23 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index f5c4a51eb42e..c13f1cec9abb 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1585,6 +1585,7 @@ int security_syslog(int type); int security_settime(struct timespec *ts, struct timezone *tz); int security_vm_enough_memory(long pages); int security_vm_enough_memory_mm(struct mm_struct *mm, long pages); +int security_vm_enough_memory_kern(long pages); int security_bprm_alloc(struct linux_binprm *bprm); void security_bprm_free(struct linux_binprm *bprm); void security_bprm_apply_creds(struct linux_binprm *bprm, int unsafe); @@ -1820,6 +1821,11 @@ static inline int security_vm_enough_memory(long pages) return cap_vm_enough_memory(current->mm, pages); } +static inline int security_vm_enough_memory_kern(long pages) +{ + return cap_vm_enough_memory(current->mm, pages); +} + static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) { return cap_vm_enough_memory(mm, pages); diff --git a/mm/mmap.c b/mm/mmap.c index 74f4d158022e..de14ac21e5b5 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -175,7 +175,8 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) /* Don't let a single process grow too big: leave 3% of the size of this process for other processes */ - allowed -= mm->total_vm / 32; + if (mm) + allowed -= mm->total_vm / 32; /* * cast `allowed' as a signed long because vm_committed_space diff --git a/mm/nommu.c b/mm/nommu.c index 2696b24f2bb3..7695dc850785 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1454,7 +1454,8 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) /* Don't let a single process grow too big: leave 3% of the size of this process for other processes */ - allowed -= current->mm->total_vm / 32; + if (mm) + allowed -= mm->total_vm / 32; /* * cast `allowed' as a signed long because vm_committed_space diff --git a/mm/shmem.c b/mm/shmem.c index d38d7e61fcd0..0ed075215e5f 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -161,8 +161,8 @@ static inline struct shmem_sb_info *SHMEM_SB(struct super_block *sb) */ static inline int shmem_acct_size(unsigned long flags, loff_t size) { - return (flags & VM_ACCOUNT)? - security_vm_enough_memory(VM_ACCT(size)): 0; + return (flags & VM_ACCOUNT) ? + security_vm_enough_memory_kern(VM_ACCT(size)) : 0; } static inline void shmem_unacct_size(unsigned long flags, loff_t size) @@ -179,8 +179,8 @@ static inline void shmem_unacct_size(unsigned long flags, loff_t size) */ static inline int shmem_acct_block(unsigned long flags) { - return (flags & VM_ACCOUNT)? - 0: security_vm_enough_memory(VM_ACCT(PAGE_CACHE_SIZE)); + return (flags & VM_ACCOUNT) ? + 0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)); } static inline void shmem_unacct_blocks(unsigned long flags, long pages) diff --git a/security/security.c b/security/security.c index 255b08559b2b..c0acfa7177e5 100644 --- a/security/security.c +++ b/security/security.c @@ -198,14 +198,23 @@ int security_settime(struct timespec *ts, struct timezone *tz) int security_vm_enough_memory(long pages) { + WARN_ON(current->mm == NULL); return security_ops->vm_enough_memory(current->mm, pages); } int security_vm_enough_memory_mm(struct mm_struct *mm, long pages) { + WARN_ON(mm == NULL); return security_ops->vm_enough_memory(mm, pages); } +int security_vm_enough_memory_kern(long pages) +{ + /* If current->mm is a kernel thread then we will pass NULL, + for this specific case that is fine */ + return security_ops->vm_enough_memory(current->mm, pages); +} + int security_bprm_alloc(struct linux_binprm *bprm) { return security_ops->bprm_alloc_security(bprm); -- cgit v1.2.3 From effdb9492de01a51f8123e62e87e3330688f9bf1 Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Wed, 29 Oct 2008 14:01:21 -0700 Subject: spi: fix compile error Fix compile error below: LD drivers/spi/built-in.o CC [M] drivers/spi/spi_gpio.o In file included from drivers/spi/spi_gpio.c:26: include/linux/spi/spi_bitbang.h:23: error: field `work' has incomplete type make[2]: *** [drivers/spi/spi_gpio.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Fernando Luis Vazquez Cao Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi_bitbang.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index b8db32cea1de..bf8de281b4ed 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -18,6 +18,9 @@ * duplex (MicroWire) controllers. Provide chipslect() and txrx_bufs(), * and custom setup()/cleanup() methods. */ + +#include + struct spi_bitbang { struct workqueue_struct *workqueue; struct work_struct work; -- cgit v1.2.3 From c132419e560a2ecd3c8cf77f9c37e103e74b3754 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Oct 2008 18:17:06 -0700 Subject: gianfar: Fix race in TBI/SerDes configuration The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by: Trent Piepho CC: Andy Fleming Signed-off-by: Jeff Garzik --- arch/powerpc/sysdev/fsl_soc.c | 26 ++++++++++++++++++++++++++ drivers/net/gianfar.c | 7 +++++++ drivers/net/gianfar_mii.c | 21 +++++++++++++++++++++ drivers/net/gianfar_mii.h | 3 +++ include/linux/fsl_devices.h | 3 ++- 5 files changed, 59 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 01b884b25696..26ecb96f9731 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -223,6 +223,8 @@ static int gfar_mdio_of_init_one(struct device_node *np) if (ret) return ret; + /* The gianfar device will try to use the same ID created below to find + * this bus, to coordinate register access (since they share). */ mdio_dev = platform_device_register_simple("fsl-gianfar_mdio", res.start&0xfffff, &res, 1); if (IS_ERR(mdio_dev)) @@ -394,6 +396,30 @@ static int __init gfar_of_init(void) of_node_put(mdio); } + /* Get MDIO bus controlled by this eTSEC, if any. Normally only + * eTSEC 1 will control an MDIO bus, not necessarily the same + * bus that its PHY is on ('mdio' above), so we can't just use + * that. What we do is look for a gianfar mdio device that has + * overlapping registers with this device. That's really the + * whole point, to find the device sharing our registers to + * coordinate access with it. + */ + for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") { + if (of_address_to_resource(mdio, 0, &res)) + continue; + + if (res.start >= r[0].start && res.end <= r[0].end) { + /* Get the ID the mdio bus platform device was + * registered with. gfar_data.bus_id is + * different because it's for finding a PHY, + * while this is for finding a MII bus. + */ + gfar_data.mdio_bus = res.start&0xfffff; + of_node_put(mdio); + break; + } + } + ret = platform_device_add_data(gfar_dev, &gfar_data, sizeof(struct diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 64b201134fdb..249541a1814b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -586,6 +586,10 @@ static void gfar_configure_serdes(struct net_device *dev) struct gfar_mii __iomem *regs = (void __iomem *)&priv->regs->gfar_mii_regs; int tbipa = gfar_read(&priv->regs->tbipa); + struct mii_bus *bus = gfar_get_miibus(priv); + + if (bus) + mutex_lock(&bus->mdio_lock); /* Single clk mode, mii mode off(for serdes communication) */ gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); @@ -596,6 +600,9 @@ static void gfar_configure_serdes(struct net_device *dev) gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + if (bus) + mutex_unlock(&bus->mdio_lock); } static void init_registers(struct net_device *dev) diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index bf73eea98010..0e2595d24933 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -269,6 +269,27 @@ static struct device_driver gianfar_mdio_driver = { .remove = gfar_mdio_remove, }; +static int match_mdio_bus(struct device *dev, void *data) +{ + const struct gfar_private *priv = data; + const struct platform_device *pdev = to_platform_device(dev); + + return !strcmp(pdev->name, gianfar_mdio_driver.name) && + pdev->id == priv->einfo->mdio_bus; +} + +/* Given a gfar_priv structure, find the mii_bus controlled by this device (not + * necessarily the same as the bus the gfar's PHY is on), if one exists. + * Normally only the first gianfar controls a mii_bus. */ +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv) +{ + /*const*/ struct device *d; + + d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv, + match_mdio_bus); + return d ? dev_get_drvdata(d) : NULL; +} + int __init gfar_mdio_init(void) { return driver_register(&gianfar_mdio_driver); diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 2af28b16a0e2..02dc970ca1ff 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -18,6 +18,8 @@ #ifndef __GIANFAR_MII_H #define __GIANFAR_MII_H +struct gfar_private; /* forward ref */ + #define MIIMIND_BUSY 0x00000001 #define MIIMIND_NOTVALID 0x00000004 @@ -44,6 +46,7 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); int __init gfar_mdio_init(void); void gfar_mdio_exit(void); #endif /* GIANFAR_PHY_H */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 4e625e0094c8..708bab58d8d0 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -49,7 +49,8 @@ struct gianfar_platform_data { u32 device_flags; /* board specific information */ u32 board_flags; - char bus_id[MII_BUS_ID_SIZE]; + int mdio_bus; /* Bus controlled by us */ + char bus_id[MII_BUS_ID_SIZE]; /* Bus PHY is on */ u32 phy_id; u8 mac_addr[6]; phy_interface_t interface; -- cgit v1.2.3 From 9ce8e3073d9cfd6f859c22a25441db41b85cbf6e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 27 Aug 2008 15:23:18 +0200 Subject: libata: add whitelist for devices with known good pata-sata bridges libata currently imposes a UDMA5 max transfer rate and 200 sector max transfer size for SATA devices that sit behind a pata-sata bridge. Lots of devices have known good bridges that don't need this limit applied. The MTRON SSD disks are such devices. Transfer rates are increased by 20-30% with the restriction removed. So add a "blacklist" entry for the MTRON devices, with a flag indicating that the bridge is known good. Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 7 +++++++ include/linux/libata.h | 1 + 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8824c8da3f2f..82af7011f2dd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2158,6 +2158,10 @@ retry: static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; + + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) + return 0; + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } @@ -4062,6 +4066,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + /* Devices that do not need bridging limits applied */ + { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* End Marker */ { } }; diff --git a/include/linux/libata.h b/include/linux/libata.h index 507f53ef8038..f5441edee55f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -372,6 +372,7 @@ enum { ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ + ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From ad1d967c88e349c7e822ad75dd3247a2a50d2ea3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 30 Oct 2008 23:54:35 -0700 Subject: net: delete excess kernel-doc notation Remove excess kernel-doc function parameters from networking header & driver files: Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release' Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock' Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/wan/z85230.c | 1 - include/linux/netdevice.h | 1 - include/net/sock.h | 1 - 3 files changed, 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index ccd9cd35ecbe..5bf7e01ef0e9 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -695,7 +695,6 @@ EXPORT_SYMBOL(z8530_nop); * z8530_interrupt - Handle an interrupt from a Z8530 * @irq: Interrupt number * @dev_id: The Z8530 device that is interrupting. - * @regs: unused * * A Z85[2]30 device has stuck its hand in the air for attention. * We scan both the channels on the chip for events and then call diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c8bcb59adfdf..9d77b1d7dca8 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1537,7 +1537,6 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) /** * netif_tx_lock - grab network device transmit lock * @dev: network device - * @cpu: cpu number of lock owner * * Get network device transmit lock */ diff --git a/include/net/sock.h b/include/net/sock.h index ada50c04d09f..c04f9e18ea22 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -936,7 +936,6 @@ extern void sock_init_data(struct socket *sock, struct sock *sk); /** * sk_filter_release: Release a socket filter - * @sk: socket * @fp: filter to remove * * Remove a filter from a socket and release its resources. -- cgit v1.2.3 From 4ac96572f1f6abe44b5e02e80fdfb5a990129613 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 2 Nov 2008 09:51:27 -0500 Subject: linux/string.h: fix comment typo s/user/used/ Signed-off-by: Jeff Garzik Signed-off-by: Linus Torvalds --- include/linux/string.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/string.h b/include/linux/string.h index 810d80df0a1d..d18fc198aa2f 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -1,7 +1,7 @@ #ifndef _LINUX_STRING_H_ #define _LINUX_STRING_H_ -/* We don't want strings.h stuff being user by user stuff by accident */ +/* We don't want strings.h stuff being used by user stuff by accident */ #ifndef __KERNEL__ #include -- cgit v1.2.3