From bd77375097357b46af00db1316ceab5e82ccbc8b Mon Sep 17 00:00:00 2001 From: Kavita Kavita Date: Fri, 27 Feb 2026 00:25:51 +0530 Subject: wifi: cfg80211: add support for IEEE 802.1X Authentication Protocol Add an extended feature flag NL80211_EXT_FEATURE_IEEE8021X_AUTH to allow a driver to indicate support for the IEEE 802.1X authentication protocol in non-AP STA mode, as defined in "IEEE P802.11bi/D4.0, 12.16.5". In case of SME in userspace, the Authentication frame body is prepared in userspace while the driver finalizes the Authentication frame once it receives the required fields and elements. The driver indicates support for IEEE 802.1X authentication using the extended feature flag so that userspace can initiate IEEE 802.1X authentication. When the feature flag is set, process IEEE 802.1X Authentication frames from userspace in non-AP STA mode. If the flag is not set, reject IEEE 802.1X Authentication frames. Define a new authentication type NL80211_AUTHTYPE_IEEE8021X for IEEE 802.1X authentication. Signed-off-by: Kavita Kavita Link: https://patch.msgid.link/20260226185553.1516290-4-kavita.kavita@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0aa2fb8f88de..1bf806f85372 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1358,6 +1358,7 @@ struct ieee80211_tdls_data { #define WLAN_AUTH_FILS_SK 4 #define WLAN_AUTH_FILS_SK_PFS 5 #define WLAN_AUTH_FILS_PK 6 +#define WLAN_AUTH_IEEE8021X 8 #define WLAN_AUTH_EPPKE 9 #define WLAN_AUTH_LEAP 128 -- cgit v1.2.3 From 9347878b1513beee1a26bb249f5dc8326d450f75 Mon Sep 17 00:00:00 2001 From: Kavita Kavita Date: Fri, 27 Feb 2026 00:25:52 +0530 Subject: wifi: mac80211: Add support for IEEE 802.1X authentication protocol in non-AP STA mode Add support for the IEEE 802.1X authentication protocol in non-AP STA mode, as specified in "IEEE P802.11bi/D4.0, 12.16.5". IEEE 802.1X authentication involves multiple Authentication frame exchanges, with the non-AP STA and AP alternating transaction sequence numbers. The number of Authentication frame exchanges depends on the EAP method in use. For IEEE 802.1X authentication, process only Authentication frames with the expected transaction sequence number. For IEEE 802.1X Authentication, Table 9-71 specifies that the Encapsulation Length field as specified in Clause 9.4.1.82 shall be present in all IEEE 802.1X Authentication frames. Drop the frame in the mac80211 if the Encapsulation Length field is missing. After receiving the final Authentication frame with status code WLAN_STATUS_8021X_AUTH_SUCCESS from the AP, mac80211 marks the state as authenticated, as it indicates the EAP handshake has completed successfully over the Authentication frames as specified in Clause 12.16.5. In the PMKSA caching case, only two Authentication frames are exchanged if the AP identifies a valid PMKSA, then as specified in Clause 12.16.8.3, the AP shall set the Status Code to WLAN_STATUS_SUCCESS in the final Authentication frame and must not include an encapsulated EAPOL PDU. This frame will be the final Authentication frame from the AP when PMKSA caching is enabled, and mac80211 marks the state as authenticated. In case of authentication success or failure, forward the Authentication frame to userspace(e.g. wpa_supplicant), and let userspace validate the Authentication frame from the AP as per the specification. Signed-off-by: Kavita Kavita Link: https://patch.msgid.link/20260226185553.1516290-5-kavita.kavita@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 1 + net/mac80211/mlme.c | 78 +++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 73 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 1bf806f85372..3651b2e6c518 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1508,6 +1508,7 @@ enum ieee80211_statuscode { WLAN_STATUS_SAE_PK = 127, WLAN_STATUS_DENIED_TID_TO_LINK_MAPPING = 133, WLAN_STATUS_PREF_TID_TO_LINK_MAPPING_SUGGESTED = 134, + WLAN_STATUS_8021X_AUTH_SUCCESS = 153, }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 810bea1aacc5..7957eacc5ab7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4920,7 +4920,7 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - u16 auth_alg, auth_transaction, status_code; + u16 auth_alg, auth_transaction, status_code, encap_len; struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = AUTH_EVENT, @@ -4929,6 +4929,7 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, .subtype = IEEE80211_STYPE_AUTH, }; bool sae_need_confirm = false; + bool auth_fail = false; lockdep_assert_wiphy(sdata->local->hw.wiphy); @@ -4945,6 +4946,15 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); status_code = le16_to_cpu(mgmt->u.auth.status_code); + /* + * IEEE 802.1X Authentication: + * Header + Authentication Algorithm Number(2 byte) + Authentication + * Transaction Sequence Number(2 byte) + Status Code(2 byte) + + * Encapsulation Length(2 byte). + */ + if (auth_alg == WLAN_AUTH_IEEE8021X && len < 24 + 8) + return; + info.link_id = ifmgd->auth_data->link_id; if (auth_alg != ifmgd->auth_data->algorithm || @@ -4960,7 +4970,24 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, goto notify_driver; } - if (status_code != WLAN_STATUS_SUCCESS) { + switch (auth_alg) { + case WLAN_AUTH_IEEE8021X: + if (status_code != WLAN_STATUS_SUCCESS && + status_code != WLAN_STATUS_8021X_AUTH_SUCCESS) + auth_fail = true; + + if (!auth_fail) { + /* Indicates length of encapsulated EAPOL PDU */ + encap_len = get_unaligned_le16(mgmt->u.auth.variable); + } + break; + default: + if (status_code != WLAN_STATUS_SUCCESS) + auth_fail = true; + break; + } + + if (auth_fail) { cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); if (auth_alg == WLAN_AUTH_SAE && @@ -4997,6 +5024,7 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, case WLAN_AUTH_FILS_SK_PFS: case WLAN_AUTH_FILS_PK: case WLAN_AUTH_EPPKE: + case WLAN_AUTH_IEEE8021X: break; case WLAN_AUTH_SHARED_KEY: if (ifmgd->auth_data->expected_transaction != 4) { @@ -5017,8 +5045,37 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || (auth_transaction == 2 && ifmgd->auth_data->expected_transaction == 2)) { - if (!ieee80211_mark_sta_auth(sdata)) - return; /* ignore frame -- wait for timeout */ + switch (ifmgd->auth_data->algorithm) { + case WLAN_AUTH_IEEE8021X: + /* + * IEEE 802.1X authentication: + * - When the full EAP handshake completes over the + * Authentication process, the responder sets the + * Status Code to WLAN_STATUS_8021X_AUTH_SUCCESS as + * specified in "IEEE P802.11bi/D4.0, 12.16.5". + * + * - In the PMKSA caching case, only two Authentication + * frames are exchanged if the responder (e.g., AP) + * identifies a valid PMKSA, then as specified in + * "IEEE P802.11bi/D4.0, 12.16.8.3", the responder + * shall set the Status Code to SUCCESS in the final + * Authentication frame and must not include an + * encapsulated EAPOL PDU. + * + * Both conditions are treated as successful + * authentication, so mark the state to Authenticated. + */ + if (status_code != WLAN_STATUS_8021X_AUTH_SUCCESS && + !(status_code == WLAN_STATUS_SUCCESS && + encap_len == 0)) + break; + fallthrough; + default: + if (!ieee80211_mark_sta_auth(sdata)) + return; /* ignore frame -- wait for timeout */ + + break; + } } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && auth_transaction == 1) { sae_need_confirm = true; @@ -8460,6 +8517,10 @@ static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) } else if (auth_data->algorithm == WLAN_AUTH_EPPKE) { trans = auth_data->trans; status = auth_data->status; + } else if (auth_data->algorithm == WLAN_AUTH_IEEE8021X) { + trans = auth_data->trans; + status = auth_data->status; + auth_data->expected_transaction = trans + 1; } if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) @@ -9117,7 +9178,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, } if (ifmgd->auth_data && - ifmgd->auth_data->algorithm == WLAN_AUTH_EPPKE) + (ifmgd->auth_data->algorithm == WLAN_AUTH_EPPKE || + ifmgd->auth_data->algorithm == WLAN_AUTH_IEEE8021X)) new_sta->sta.epp_peer = true; new_sta->sta.mlo = mlo; @@ -9377,6 +9439,9 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, case NL80211_AUTHTYPE_EPPKE: auth_alg = WLAN_AUTH_EPPKE; break; + case NL80211_AUTHTYPE_IEEE8021X: + auth_alg = WLAN_AUTH_IEEE8021X; + break; default: return -EOPNOTSUPP; } @@ -9402,7 +9467,8 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, if (req->auth_data_len >= 4) { if (req->auth_type == NL80211_AUTHTYPE_SAE || - req->auth_type == NL80211_AUTHTYPE_EPPKE) { + req->auth_type == NL80211_AUTHTYPE_EPPKE || + req->auth_type == NL80211_AUTHTYPE_IEEE8021X) { __le16 *pos = (__le16 *) req->auth_data; auth_data->trans = le16_to_cpu(pos[0]); -- cgit v1.2.3 From 44d93cf1abb6a85d65c3b4b027c82d44263de6a5 Mon Sep 17 00:00:00 2001 From: Karthikeyan Kathirvel Date: Wed, 4 Mar 2026 14:23:42 +0530 Subject: wifi: UHR: define DPS/DBE/P-EDCA elements and fix size parsing Add UHR Operation and Capability definitions and parsing helpers: - Define ieee80211_uhr_dps_info, ieee80211_uhr_dbe_info, ieee80211_uhr_p_edca_info with masks. - Update ieee80211_uhr_oper_size_ok() to account for optional DPS/DBE/P-EDCA blocks. - Move NPCA pointer position after DPS Operation Parameter if it is present in ieee80211_uhr_oper_size_ok(). - Move NPCA pointer position after DPS info if it is present in ieee80211_uhr_npca_info(). Signed-off-by: Karthikeyan Kathirvel Link: https://patch.msgid.link/20260304085343.1093993-2-karthikeyan.kathirvel@oss.qualcomm.com Signed-off-by: Johannes Berg --- include/linux/ieee80211-uhr.h | 271 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 265 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211-uhr.h b/include/linux/ieee80211-uhr.h index 132acced7d79..9729d23e4766 100644 --- a/include/linux/ieee80211-uhr.h +++ b/include/linux/ieee80211-uhr.h @@ -29,11 +29,216 @@ struct ieee80211_uhr_operation { #define IEEE80211_UHR_NPCA_PARAMS_MOPLEN 0x00400000 #define IEEE80211_UHR_NPCA_PARAMS_DIS_SUBCH_BMAP_PRES 0x00800000 +/** + * struct ieee80211_uhr_npca_info - npca operation information + * + * This structure is the "NPCA Operation Parameters field format" of "UHR + * Operation Element" fields as described in P802.11bn_D1.3 + * subclause 9.4.2.353. See Figure 9-aa4. + * + * Refer to IEEE80211_UHR_NPCA* + * @params: + * NPCA Primary Channel - NPCA primary channel + * NPCA_Min Duration Threshold - Minimum duration of inter-BSS activity + * NPCA Switching Delay - + * Time needed by an NPCA AP to switch from the + * BSS primary channel to the NPCA primary channel + * in the unit of 4 µs. + * NPCA Switching Back Delay - + * Time to switch from the NPCA primary channel + * to the BSS primary channel in the unit of 4 µs. + * NPCA Initial QSRC - + * Initialize the EDCAF QSRC[AC] variables + * when an NPCA STA in the BSS + * switches to NPCA operation. + * NPCA MOPLEN - + * Indicates which conditions can be used to + * initiate an NPCA operation, + * 1 -> both PHYLEN NPCA operation and MOPLEN + * NPCA operation are + * permitted in the BSS + * 0 -> only PHYLEN NPCA operation is allowed in the BSS. + * NPCA Disabled Subchannel Bitmap Present - + * Indicates whether the NPCA Disabled Subchannel + * Bitmap field is present. A 1 in this field indicates that + * the NPCA Disabled Subchannel Bitmap field is present + * @dis_subch_bmap: + * A bit in the bitmap that lies within the BSS bandwidth is set + * to 1 to indicate that the corresponding 20 MHz subchannel is + * punctured and is set to 0 to indicate that the corresponding + * 20 MHz subchannel is not punctured. A bit in the bitmap that + * falls outside of the BSS bandwidth is reserved. This field is + * present when the value of the NPCA Disabled Subchannel Bitmap + * Field Present field is equal to 1, and not present, otherwise + */ struct ieee80211_uhr_npca_info { __le32 params; __le16 dis_subch_bmap[]; } __packed; +#define IEEE80211_UHR_DPS_PADDING_DELAY 0x0000003F +#define IEEE80211_UHR_DPS_TRANSITION_DELAY 0x00003F00 +#define IEEE80211_UHR_DPS_ICF_REQUIRED 0x00010000 +#define IEEE80211_UHR_DPS_PARAMETERIZED_FLAG 0x00020000 +#define IEEE80211_UHR_DPS_LC_MODE_BW 0x001C0000 +#define IEEE80211_UHR_DPS_LC_MODE_NSS 0x01E00000 +#define IEEE80211_UHR_DPS_LC_MODE_MCS 0x1E000000 +#define IEEE80211_UHR_DPS_MOBILE_AP_DPS_STATIC_HCM 0x20000000 + +/** + * struct ieee80211_uhr_dps_info - DPS operation information + * + * This structure is the "DPS Operation Parameter field" of "UHR + * Operation Element" fields as described in P802.11bn_D1.3 + * subclause 9.4.1.87. See Figure 9-207u. + * + * Refer to IEEE80211_UHR_DPS* + * @params: + * DPS Padding Delay - + * Indicates the minimum MAC padding + * duration that is required by a DPS STA + * in an ICF to cause the STA to transition + * from the lower capability mode to the + * higher capability mode. The DPS Padding + * Delay field is in units of 4 µs. + * DPS Transition Delay - + * Indicates the amount of time required by a + * DPS STA to transition from the higher + * capability mode to the lower capability + * mode. The DPS Transition Delay field is in + * units of 4 µs. + * ICF Required - + * Indicates when the DPS assisting STA needs + * to transmit an ICF frame to the peer DPS STA + * before performing the frame exchanges with + * the peer DPS STA in a TXOP. + * 1 -> indicates that the transmission of the + * ICF frame to the peer DPS STA prior to + * any frame exchange is needed. + * 0 -> ICF transmission before the frame + * exchanges with the peer DPS STA is only + * needed if the frame exchange is performed + * in the HC mode. + * Parameterized Flag - + * 0 -> indicates that only 20 MHz, 1 SS, + * non-HT PPDU format with the data + * rate of 6, 12, and 24 Mb/s as the + * default mode are supported by the + * DPS STA in the LC mode + * 1 -> indicates that a bandwidth up to the + * bandwidth indicated in the LC Mode + * Bandwidth field, a number of spatial + * streams up to the NSS indicated in + * the LC Mode Nss field, and an MCS up + * to the MCS indicated in the LC Mode + * MCS fields are supported by the DPS + * STA in the LC mode as the + * parameterized mode. + * LC Mode Bandwidth - + * Indicates the maximum bandwidth supported + * by the STA in the LC mode. + * LC Mode NSS - + * Indicates the maximum number of the spatial + * streams supported by the STA in the LC mode. + * LC Mode MCS - + * Indicates the highest MCS supported by the STA + * in the LC mode. + * Mobile AP DPS Static HCM - + * 1 -> indicates that it will remain in the DPS high + * capability mode until the next TBTT on that + * link. + * 0 -> otherwise. + */ +struct ieee80211_uhr_dps_info { + __le32 params; +} __packed; + +#define IEEE80211_UHR_DBE_OPER_BANDWIDTH 0x07 +#define IEEE80211_UHR_DBE_OPER_DIS_SUBCHANNEL_BITMAP_PRES 0x08 + +/** + * enum ieee80211_uhr_dbe_oper_bw - DBE Operational Bandwidth + * + * Encoding for the DBE Operational Bandwidth field in the UHR Operation + * element (DBE Operation Parameters). + * + * @IEEE80211_UHR_DBE_OPER_BW_40: 40 MHz operational DBE bandwidth + * @IEEE80211_UHR_DBE_OPER_BW_80: 80 MHz operational DBE bandwidth + * @IEEE80211_UHR_DBE_OPER_BW_160: 160 MHz operational DBE bandwidth + * @IEEE80211_UHR_DBE_OPER_BW_320_1: 320-1 MHz operational DBE bandwidth + * @IEEE80211_UHR_DBE_OPER_BW_320_2: 320-2 MHz operational DBE bandwidth + */ +enum ieee80211_uhr_dbe_oper_bw { + IEEE80211_UHR_DBE_OPER_BW_40 = 1, + IEEE80211_UHR_DBE_OPER_BW_80 = 2, + IEEE80211_UHR_DBE_OPER_BW_160 = 3, + IEEE80211_UHR_DBE_OPER_BW_320_1 = 4, + IEEE80211_UHR_DBE_OPER_BW_320_2 = 5, +}; + +/** + * struct ieee80211_uhr_dbe_info - DBE operation information + * + * This structure is the "DBE Operation Parameters field" of + * "UHR Operation Element" fields as described in P802.11bn_D1.3 + * subclause 9.4.2.353. See Figure 9-aa6. + * + * Refer to IEEE80211_UHR_DBE_OPER* + * @params: + * B0-B2 - DBE Operational Bandwidth field, see + * "enum ieee80211_uhr_dbe_oper_bw" for values. + * Value 0 is reserved. + * Value 1 indicates 40 MHz operational DBE bandwidth. + * Value 2 indicates 80 MHz operational DBE bandwidth. + * Value 3 indicates 160 MHz operational DBE bandwidth. + * Value 4 indicates 320-1 MHz operational DBE bandwidth. + * Value 5 indicates 320-2 MHz operational DBE bandwidth. + * Values 6 to 7 are reserved. + * B3 - DBE Disabled Subchannel Bitmap Present. + * @dis_subch_bmap: DBE Disabled Subchannel Bitmap field is set to indicate + * disabled 20 MHz subchannels within the DBE Bandwidth. + */ +struct ieee80211_uhr_dbe_info { + u8 params; + __le16 dis_subch_bmap[]; +} __packed; + +#define IEEE80211_UHR_P_EDCA_ECWMIN 0x0F +#define IEEE80211_UHR_P_EDCA_ECWMAX 0xF0 +#define IEEE80211_UHR_P_EDCA_AIFSN 0x000F +#define IEEE80211_UHR_P_EDCA_CW_DS 0x0030 +#define IEEE80211_UHR_P_EDCA_PSRC_THRESHOLD 0x01C0 +#define IEEE80211_UHR_P_EDCA_QSRC_THRESHOLD 0x0600 + +/** + * struct ieee80211_uhr_p_edca_info - P-EDCA operation information + * + * This structure is the "P-EDCA Operation Parameters field" of + * "UHR Operation Element" fields as described in P802.11bn_D1.3 + * subclause 9.4.2.353. See Figure 9-aa5. + * + * Refer to IEEE80211_UHR_P_EDCA* + * @p_edca_ec: P-EDCA ECWmin and ECWmax. + * These fields indicate the CWmin and CWmax values used by a + * P-EDCA STA during P-EDCA contention. + * @params: AIFSN, CW DS, PSRC threshold, and QSRC threshold. + * - The AIFSN field indicates the AIFSN value used by a P-EDCA STA + * during P-EDCA contention. + * - The CW DS field indicates the value used for randomization of the + * transmission slot of the DS-CTS frame. The value 3 is reserved. + * The value 0 indicates that randomization is not enabled. + * - The P-EDCA PSRC threshold field indicates the maximum number of + * allowed consecutive DS-CTS transmissions. The value 0 and values + * greater than 4 are reserved. + * - The P-EDCA QSRC threshold field indicates the value of the + * QSRC[AC_VO] counter required to start P-EDCA contention. The + * value 0 is reserved. + */ +struct ieee80211_uhr_p_edca_info { + u8 p_edca_ec; + __le16 params; +} __packed; + static inline bool ieee80211_uhr_oper_size_ok(const u8 *data, u8 len, bool beacon) { @@ -47,19 +252,52 @@ static inline bool ieee80211_uhr_oper_size_ok(const u8 *data, u8 len, if (beacon) return true; - /* FIXME: DPS, DBE, P-EDCA (consider order, also relative to NPCA) */ + /* DPS Operation Parameters (fixed 4 bytes) */ + if (oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_DPS_ENA)) { + needed += sizeof(struct ieee80211_uhr_dps_info); + if (len < needed) + return false; + } + /* NPCA Operation Parameters (fixed 4 bytes + optional 2 bytes) */ if (oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_NPCA_ENA)) { const struct ieee80211_uhr_npca_info *npca = - (const void *)oper->variable; + (const void *)(data + needed); needed += sizeof(*npca); - if (len < needed) return false; - if (npca->params & cpu_to_le32(IEEE80211_UHR_NPCA_PARAMS_DIS_SUBCH_BMAP_PRES)) + if (npca->params & + cpu_to_le32(IEEE80211_UHR_NPCA_PARAMS_DIS_SUBCH_BMAP_PRES)) { needed += sizeof(npca->dis_subch_bmap[0]); + if (len < needed) + return false; + } + } + + /* P-EDCA Operation Parameters (fixed 3 bytes) */ + if (oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_PEDCA_ENA)) { + needed += sizeof(struct ieee80211_uhr_p_edca_info); + if (len < needed) + return false; + } + + /* DBE Operation Parameters (fixed 1 byte + optional 2 bytes) */ + if (oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_DBE_ENA)) { + const struct ieee80211_uhr_dbe_info *dbe = + (const void *)(data + needed); + + needed += sizeof(*dbe); + if (len < needed) + return false; + + if (dbe->params & + IEEE80211_UHR_DBE_OPER_DIS_SUBCHANNEL_BITMAP_PRES) { + needed += sizeof(dbe->dis_subch_bmap[0]); + if (len < needed) + return false; + } } return len >= needed; @@ -72,12 +310,15 @@ static inline bool ieee80211_uhr_oper_size_ok(const u8 *data, u8 len, static inline const struct ieee80211_uhr_npca_info * ieee80211_uhr_npca_info(const struct ieee80211_uhr_operation *oper) { + const u8 *pos = oper->variable; + if (!(oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_NPCA_ENA))) return NULL; - /* FIXME: DPS */ + if (oper->params & cpu_to_le16(IEEE80211_UHR_OPER_PARAMS_DPS_ENA)) + pos += sizeof(struct ieee80211_uhr_dps_info); - return (const void *)oper->variable; + return (const void *)pos; } static inline const __le16 * @@ -131,6 +372,24 @@ ieee80211_uhr_npca_dis_subch_bitmap(const struct ieee80211_uhr_operation *oper) #define IEEE80211_UHR_MAC_CAP_DBE_EHT_MCS_MAP_160_PRES 0x08 #define IEEE80211_UHR_MAC_CAP_DBE_EHT_MCS_MAP_320_PRES 0x10 +/** + * enum ieee80211_uhr_dbe_max_supported_bw - DBE Maximum Supported Bandwidth + * + * As per spec P802.11bn_D1.3 "Table 9-bb5—Encoding of the DBE Maximum + * Supported Bandwidth field". + * + * @IEEE80211_UHR_DBE_MAX_BW_40: Indicates 40 MHz DBE max supported bw + * @IEEE80211_UHR_DBE_MAX_BW_80: Indicates 80 MHz DBE max supported bw + * @IEEE80211_UHR_DBE_MAX_BW_160: Indicates 160 MHz DBE max supported bw + * @IEEE80211_UHR_DBE_MAX_BW_320: Indicates 320 MHz DBE max supported bw + */ +enum ieee80211_uhr_dbe_max_supported_bw { + IEEE80211_UHR_DBE_MAX_BW_40 = 1, + IEEE80211_UHR_DBE_MAX_BW_80 = 2, + IEEE80211_UHR_DBE_MAX_BW_160 = 3, + IEEE80211_UHR_DBE_MAX_BW_320 = 4, +}; + struct ieee80211_uhr_cap_mac { u8 mac_cap[5]; } __packed; -- cgit v1.2.3