From 68ac64cd3fd89fdaa091701f6ab98a9065e9b1b5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Apr 2006 11:13:50 +0100 Subject: [SERIAL] Clean up serial locking when obtaining a reference to a port The locking for the uart_port is over complicated, and can be simplified if we introduce a flag to indicate that a port is "dead" and will be removed. This also helps the validator because it removes a case of non-nested unlock ordering. Signed-off-by: Russell King Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index c32e60e79dea..bd14858121ea 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -254,6 +254,7 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) +#define UPF_DEAD ((__force upf_t) (1 << 30)) #define UPF_IOREMAP ((__force upf_t) (1 << 31)) #define UPF_CHANGE_MASK ((__force upf_t) (0x17fff)) -- cgit v1.2.3 From 37be4e7809e0581db85387e126ae4da68c3d6286 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 May 2006 17:24:59 +0100 Subject: [MMC] extend data timeout for writes The CSD contains a "read2write factor" which determines the multiplier to be applied to the read timeout to obtain the write timeout. We were ignoring this parameter, resulting in the possibility for writes being timed out too early. Signed-off-by: Russell King --- drivers/mmc/mmc.c | 2 ++ drivers/mmc/mmc_block.c | 6 ++++++ include/linux/mmc/card.h | 1 + 3 files changed, 9 insertions(+) (limited to 'include/linux') diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index da6ddd910fc5..05aa4d6b4f24 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -549,6 +549,7 @@ static void mmc_decode_csd(struct mmc_card *card) csd->read_partial = UNSTUFF_BITS(resp, 79, 1); csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); } else { @@ -583,6 +584,7 @@ static void mmc_decode_csd(struct mmc_card *card) csd->read_partial = UNSTUFF_BITS(resp, 79, 1); csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); } diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 8eb2a2ede64b..06bd1f4cb9b1 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -187,6 +187,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.cmd.opcode = MMC_WRITE_BLOCK; brq.data.flags |= MMC_DATA_WRITE; brq.data.blocks = 1; + + /* + * Scale up the timeout by the r2w factor + */ + brq.data.timeout_ns <<= card->csd.r2w_factor; + brq.data.timeout_clks <<= card->csd.r2w_factor; } if (brq.data.blocks > 1) { diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 30dd978c1ec8..991a37382a22 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -28,6 +28,7 @@ struct mmc_csd { unsigned short cmdclass; unsigned short tacc_clks; unsigned int tacc_ns; + unsigned int r2w_factor; unsigned int max_dtr; unsigned int read_blkbits; unsigned int write_blkbits; -- cgit v1.2.3 From 6e1976961c9bd9a3dc368139fab1883961efc879 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sat, 29 Apr 2006 23:06:00 +0400 Subject: [PATCH] ppc32 CPM_UART: fixes and improvements A number of small issues are fixed, and added the header file, missed from the original series. With this, driver should be pretty stable as tested among both platform-device-driven and "old way" boards. Also added missing GPL statement , and updated year field on existing ones to reflect code update. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/platforms/mpc866ads_setup.c | 2 +- drivers/serial/cpm_uart/cpm_uart.h | 19 ++++++++--- drivers/serial/cpm_uart/cpm_uart_core.c | 31 +++++++++++++---- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 2 ++ drivers/serial/cpm_uart/cpm_uart_cpm2.c | 2 ++ include/linux/fs_uart_pd.h | 60 +++++++++++++++++++++++++++++++++ 6 files changed, 104 insertions(+), 12 deletions(-) create mode 100644 include/linux/fs_uart_pd.h (limited to 'include/linux') diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 6ce3b842defe..d919dab61347 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -378,7 +378,7 @@ int __init mpc866ads_init(void) ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); #endif -#ifdef CONFIG_SERIAL_CPM_SMCer +#ifdef CONFIG_SERIAL_CPM_SMC ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index aa5eb7ddeda9..3b35cb779539 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -5,6 +5,13 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * */ #ifndef CPM_UART_H #define CPM_UART_H @@ -101,12 +108,13 @@ static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo int offset; u32 val = (u32)addr; /* sane check */ - if ((val >= (u32)pinfo->mem_addr) && + if (likely((val >= (u32)pinfo->mem_addr)) && (val<((u32)pinfo->mem_addr + pinfo->mem_size))) { offset = val - (u32)pinfo->mem_addr; return pinfo->dma_addr+offset; } - printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + /* something nasty happened */ + BUG(); return 0; } @@ -115,12 +123,13 @@ static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo int offset; u32 val = addr; /* sane check */ - if ((val >= pinfo->dma_addr) && - (val<(pinfo->dma_addr + pinfo->mem_size))) { + if (likely((val >= pinfo->dma_addr) && + (val<(pinfo->dma_addr + pinfo->mem_size)))) { offset = val - (u32)pinfo->dma_addr; return (void*)(pinfo->mem_addr+offset); } - printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + /* something nasty happened */ + BUG(); return 0; } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index b9d1185df20c..969f94900431 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -12,7 +12,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. - * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -81,7 +82,7 @@ early_uart_get_pdev(int index) } -void cpm_uart_count(void) +static void cpm_uart_count(void) { cpm_uart_nr = 0; #ifdef CONFIG_SERIAL_CPM_SMC1 @@ -104,6 +105,21 @@ void cpm_uart_count(void) #endif } +/* Get UART number by its id */ +static int cpm_uart_id2nr(int id) +{ + int i; + if (id < UART_NR) { + for (i=0; ifs_no; line++); + line = cpm_uart_id2nr(idx); + if(line < 0) { + printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx); + return -1; + } pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; @@ -1245,8 +1265,7 @@ static int cpm_uart_drv_probe(struct device *dev) } pdata = pdev->dev.platform_data; - pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", - cpm_uart_port_map[pdata->fs_no]); + pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) return ret; @@ -1265,7 +1284,7 @@ static int cpm_uart_drv_remove(struct device *dev) struct fs_uart_platform_info *pdata = pdev->dev.platform_data; pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n", - cpm_uart_port_map[pdata->fs_no]); + cpm_uart_id2nr(pdata->fs_no)); uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); return 0; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index a5a30622637a..17406a05ce1f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -8,6 +8,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 7c6b07aeea92..4b2de08f46d0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -8,6 +8,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h new file mode 100644 index 000000000000..f5975126b712 --- /dev/null +++ b/include/linux/fs_uart_pd.h @@ -0,0 +1,60 @@ +/* + * Platform information definitions for the CPM Uart driver. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_UART_PD_H +#define FS_UART_PD_H + +#include +#include + +enum fs_uart_id { + fsid_smc1_uart, + fsid_smc2_uart, + fsid_scc1_uart, + fsid_scc2_uart, + fsid_scc3_uart, + fsid_scc4_uart, + fs_uart_nr, +}; + +static inline int fs_uart_id_scc2fsid(int id) +{ + return fsid_scc1_uart + id - 1; +} + +static inline int fs_uart_id_fsid2scc(int id) +{ + return id - fsid_scc1_uart + 1; +} + +static inline int fs_uart_id_smc2fsid(int id) +{ + return fsid_smc1_uart + id - 1; +} + +static inline int fs_uart_id_fsid2smc(int id) +{ + return id - fsid_smc1_uart + 1; +} + +struct fs_uart_platform_info { + void(*init_ioports)(void); + /* device specific information */ + int fs_no; /* controller index */ + u32 uart_clk; + u8 tx_num_fifo; + u8 tx_buf_size; + u8 rx_num_fifo; + u8 rx_buf_size; + u8 brg; +}; + +#endif -- cgit v1.2.3 From 1432873af7ae29d4bb3c56114c05b539d078ca62 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 3 May 2006 10:35:26 +0200 Subject: [PATCH] splice: LRU fixups Nick says that the current construct isn't safe. This goes back to the original, but sets PIPE_BUF_FLAG_LRU on user pages as well as they all seem to be on the LRU in the first place. Signed-off-by: Jens Axboe --- fs/splice.c | 33 +++++++++++---------------------- include/linux/pipe_fs_i.h | 5 +++-- 2 files changed, 14 insertions(+), 24 deletions(-) (limited to 'include/linux') diff --git a/fs/splice.c b/fs/splice.c index 27f5e3738a7b..0b202425b0b5 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -78,6 +78,7 @@ static int page_cache_pipe_buf_steal(struct pipe_inode_info *info, return 1; } + buf->flags |= PIPE_BUF_FLAG_LRU; return 0; } @@ -85,6 +86,7 @@ static void page_cache_pipe_buf_release(struct pipe_inode_info *info, struct pipe_buffer *buf) { page_cache_release(buf->page); + buf->flags &= ~PIPE_BUF_FLAG_LRU; } static int page_cache_pipe_buf_pin(struct pipe_inode_info *info, @@ -141,6 +143,7 @@ static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe, if (!(buf->flags & PIPE_BUF_FLAG_GIFT)) return 1; + buf->flags |= PIPE_BUF_FLAG_LRU; return generic_pipe_buf_steal(pipe, buf); } @@ -566,37 +569,23 @@ static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf, */ if ((sd->flags & SPLICE_F_MOVE) && this_len == PAGE_CACHE_SIZE) { /* - * If steal succeeds, buf->page is now pruned from the vm - * side (page cache) and we can reuse it. The page will also - * be locked on successful return. + * If steal succeeds, buf->page is now pruned from the + * pagecache and we can reuse it. The page will also be + * locked on successful return. */ if (buf->ops->steal(info, buf)) goto find_page; page = buf->page; - page_cache_get(page); - - /* - * page must be on the LRU for adding to the pagecache. - * Check this without grabbing the zone lock, if it isn't - * the do grab the zone lock, recheck, and add if necessary. - */ - if (!PageLRU(page)) { - struct zone *zone = page_zone(page); - - spin_lock_irq(&zone->lru_lock); - if (!PageLRU(page)) { - SetPageLRU(page); - add_page_to_inactive_list(zone, page); - } - spin_unlock_irq(&zone->lru_lock); - } - if (add_to_page_cache(page, mapping, index, gfp_mask)) { - page_cache_release(page); unlock_page(page); goto find_page; } + + page_cache_get(page); + + if (!(buf->flags & PIPE_BUF_FLAG_LRU)) + lru_cache_add(page); } else { find_page: page = find_lock_page(mapping, index); diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index ba73108cbf8b..ea4f7cd7bfd8 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -5,8 +5,9 @@ #define PIPE_BUFFERS (16) -#define PIPE_BUF_FLAG_ATOMIC 0x01 /* was atomically mapped */ -#define PIPE_BUF_FLAG_GIFT 0x02 /* page is a gift */ +#define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ +#define PIPE_BUF_FLAG_ATOMIC 0x02 /* was atomically mapped */ +#define PIPE_BUF_FLAG_GIFT 0x04 /* page is a gift */ struct pipe_buffer { struct page *page; -- cgit v1.2.3 From 7582e9d17edbabab6cbe59467c5d1b5e8c04fca8 Mon Sep 17 00:00:00 2001 From: Jing Min Zhao Date: Wed, 3 May 2006 23:19:59 -0700 Subject: [NETFILTER]: H.323 helper: Change author's email address Signed-off-by: Jing Min Zhao Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h | 2 +- net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h b/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h index 0bd828081c0c..c6e9a0b6d30b 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h +++ b/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h @@ -2,7 +2,7 @@ * ip_conntrack_helper_h323_asn1.h - BER and PER decoding library for H.323 * conntrack/NAT module. * - * Copyright (c) 2006 by Jing Min Zhao + * Copyright (c) 2006 by Jing Min Zhao * * This source code is licensed under General Public License version 2. * diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c index f52d2c45a6ae..355a53a5b6cd 100644 --- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c +++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c @@ -2,7 +2,7 @@ * ip_conntrack_helper_h323_asn1.c - BER and PER decoding library for H.323 * conntrack/NAT module. * - * Copyright (c) 2006 by Jing Min Zhao + * Copyright (c) 2006 by Jing Min Zhao * * This source code is licensed under General Public License version 2. * -- cgit v1.2.3 From 1498221d51a43d5fa1a580618591497d90f957d9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 6 May 2006 17:55:11 -0700 Subject: [CLASS DEVICE]: add attribute_group creation Extend the support of attribute groups in class_device's to allow groups to be created as part of the registration process. This allows network device's to avoid race between registration and creating groups. Note that unlike attributes that are a property of the class object, the groups are a property of the class_device object. This is done because there are different types of network devices (wireless for example). Signed-off-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/base/class.c | 32 ++++++++++++++++++++++++++++++++ include/linux/device.h | 2 ++ 2 files changed, 34 insertions(+) (limited to 'include/linux') diff --git a/drivers/base/class.c b/drivers/base/class.c index 0e71dff327cd..b1ea4df85c7d 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -456,6 +456,35 @@ static void class_device_remove_attrs(struct class_device * cd) } } +static int class_device_add_groups(struct class_device * cd) +{ + int i; + int error = 0; + + if (cd->groups) { + for (i = 0; cd->groups[i]; i++) { + error = sysfs_create_group(&cd->kobj, cd->groups[i]); + if (error) { + while (--i >= 0) + sysfs_remove_group(&cd->kobj, cd->groups[i]); + goto out; + } + } + } +out: + return error; +} + +static void class_device_remove_groups(struct class_device * cd) +{ + int i; + if (cd->groups) { + for (i = 0; cd->groups[i]; i++) { + sysfs_remove_group(&cd->kobj, cd->groups[i]); + } + } +} + static ssize_t show_dev(struct class_device *class_dev, char *buf) { return print_dev_t(buf, class_dev->devt); @@ -559,6 +588,8 @@ int class_device_add(struct class_device *class_dev) class_name); } + class_device_add_groups(class_dev); + kobject_uevent(&class_dev->kobj, KOBJ_ADD); /* notify any interfaces this device is now here */ @@ -672,6 +703,7 @@ void class_device_del(struct class_device *class_dev) if (class_dev->devt_attr) class_device_remove_file(class_dev, class_dev->devt_attr); class_device_remove_attrs(class_dev); + class_device_remove_groups(class_dev); kobject_uevent(&class_dev->kobj, KOBJ_REMOVE); kobject_del(&class_dev->kobj); diff --git a/include/linux/device.h b/include/linux/device.h index f6e72a65a3f2..e8e53b9accc6 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -200,6 +200,7 @@ extern int class_device_create_file(struct class_device *, * @node: for internal use by the driver core only. * @kobj: for internal use by the driver core only. * @devt_attr: for internal use by the driver core only. + * @groups: optional additional groups to be created * @dev: if set, a symlink to the struct device is created in the sysfs * directory for this struct class device. * @class_data: pointer to whatever you want to store here for this struct @@ -228,6 +229,7 @@ struct class_device { struct device * dev; /* not necessary, but nice to have */ void * class_data; /* class-specific data */ struct class_device *parent; /* parent of this child device, if there is one */ + struct attribute_group ** groups; /* optional groups */ void (*release)(struct class_device *dev); int (*uevent)(struct class_device *dev, char **envp, -- cgit v1.2.3 From fe9925b551a95fae6ec61470c79f8b701a2fe928 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 6 May 2006 17:56:03 -0700 Subject: [NET]: Create netdev attribute_groups with class_device_add Atomically create attributes when class device is added. This avoids the race between registering class_device (which generates hotplug event), and the creation of attribute groups. Signed-off-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ net/core/dev.c | 2 +- net/core/net-sysfs.c | 49 ++++++++++++----------------------------------- 3 files changed, 15 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 01db7b88a2b1..309f9190a922 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -506,6 +506,8 @@ struct net_device /* class/net/name entry */ struct class_device class_dev; + /* space for optional statistics and wireless sysfs groups */ + struct attribute_group *sysfs_groups[3]; }; #define NETDEV_ALIGN 32 diff --git a/net/core/dev.c b/net/core/dev.c index 3bad1afc89fa..9ab3cfa58466 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3043,11 +3043,11 @@ void netdev_run_todo(void) switch(dev->reg_state) { case NETREG_REGISTERING: - dev->reg_state = NETREG_REGISTERED; err = netdev_register_sysfs(dev); if (err) printk(KERN_ERR "%s: failed sysfs registration (%d)\n", dev->name, err); + dev->reg_state = NETREG_REGISTERED; break; case NETREG_UNREGISTERING: diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index c12990c9c603..47a6fceb6771 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -29,7 +29,7 @@ static const char fmt_ulong[] = "%lu\n"; static inline int dev_isalive(const struct net_device *dev) { - return dev->reg_state == NETREG_REGISTERED; + return dev->reg_state <= NETREG_REGISTERED; } /* use same locking rules as GIF* ioctl's */ @@ -445,58 +445,33 @@ static struct class net_class = { void netdev_unregister_sysfs(struct net_device * net) { - struct class_device * class_dev = &(net->class_dev); - - if (net->get_stats) - sysfs_remove_group(&class_dev->kobj, &netstat_group); - -#ifdef WIRELESS_EXT - if (net->get_wireless_stats || (net->wireless_handlers && - net->wireless_handlers->get_wireless_stats)) - sysfs_remove_group(&class_dev->kobj, &wireless_group); -#endif - class_device_del(class_dev); - + class_device_del(&(net->class_dev)); } /* Create sysfs entries for network device. */ int netdev_register_sysfs(struct net_device *net) { struct class_device *class_dev = &(net->class_dev); - int ret; + struct attribute_group **groups = net->sysfs_groups; + class_device_initialize(class_dev); class_dev->class = &net_class; class_dev->class_data = net; + class_dev->groups = groups; + BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ); strlcpy(class_dev->class_id, net->name, BUS_ID_SIZE); - if ((ret = class_device_register(class_dev))) - goto out; - if (net->get_stats && - (ret = sysfs_create_group(&class_dev->kobj, &netstat_group))) - goto out_unreg; + if (net->get_stats) + *groups++ = &netstat_group; #ifdef WIRELESS_EXT - if (net->get_wireless_stats || (net->wireless_handlers && - net->wireless_handlers->get_wireless_stats)) { - ret = sysfs_create_group(&class_dev->kobj, &wireless_group); - if (ret) - goto out_cleanup; - } - return 0; -out_cleanup: - if (net->get_stats) - sysfs_remove_group(&class_dev->kobj, &netstat_group); -#else - return 0; + if (net->get_wireless_stats + || (net->wireless_handlers && net->wireless_handlers->get_wireless_stats)) + *groups++ = &wireless_group; #endif -out_unreg: - printk(KERN_WARNING "%s: sysfs attribute registration failed %d\n", - net->name, ret); - class_device_unregister(class_dev); -out: - return ret; + return class_device_add(class_dev); } int netdev_sysfs_init(void) -- cgit v1.2.3 From d324031245abbb54e4e0321004430826052b6c37 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 8 May 2006 15:11:26 -0700 Subject: sky2: backout NAPI reschedule This is a backout of earlier patch. The whole rescheduling hack was a bad idea. It doesn't really solve the problem and it makes the code more complicated for no good reason. Signed-off-by: Stephen Hemminger --- drivers/net/sky2.c | 20 ++++---------------- include/linux/netdevice.h | 18 ++++++++---------- 2 files changed, 12 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 227df9876a2c..76da74fbe859 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2105,7 +2105,6 @@ static int sky2_poll(struct net_device *dev0, int *budget) int work_done = 0; u32 status = sky2_read32(hw, B0_Y2_SP_EISR); - restart_poll: if (unlikely(status & ~Y2_IS_STAT_BMU)) { if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); @@ -2136,7 +2135,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) } if (status & Y2_IS_STAT_BMU) { - work_done += sky2_status_intr(hw, work_limit - work_done); + work_done = sky2_status_intr(hw, work_limit); *budget -= work_done; dev0->quota -= work_done; @@ -2148,22 +2147,9 @@ static int sky2_poll(struct net_device *dev0, int *budget) mod_timer(&hw->idle_timer, jiffies + HZ); - local_irq_disable(); - __netif_rx_complete(dev0); + netif_rx_complete(dev0); status = sky2_read32(hw, B0_Y2_SP_LISR); - - if (unlikely(status)) { - /* More work pending, try and keep going */ - if (__netif_rx_schedule_prep(dev0)) { - __netif_rx_reschedule(dev0, work_done); - status = sky2_read32(hw, B0_Y2_SP_EISR); - local_irq_enable(); - goto restart_poll; - } - } - - local_irq_enable(); return 0; } @@ -2181,6 +2167,8 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) prefetch(&hw->st_le[hw->st_idx]); if (likely(__netif_rx_schedule_prep(dev0))) __netif_rx_schedule(dev0); + else + printk(KERN_DEBUG PFX "irq race detected\n"); return IRQ_HANDLED; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 309f9190a922..a461b51d6076 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -831,21 +831,19 @@ static inline void netif_rx_schedule(struct net_device *dev) __netif_rx_schedule(dev); } - -static inline void __netif_rx_reschedule(struct net_device *dev, int undo) -{ - dev->quota += undo; - list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list); - __raise_softirq_irqoff(NET_RX_SOFTIRQ); -} - -/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). */ +/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). + * Do not inline this? + */ static inline int netif_rx_reschedule(struct net_device *dev, int undo) { if (netif_rx_schedule_prep(dev)) { unsigned long flags; + + dev->quota += undo; + local_irq_save(flags); - __netif_rx_reschedule(dev, undo); + list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list); + __raise_softirq_irqoff(NET_RX_SOFTIRQ); local_irq_restore(flags); return 1; } -- cgit v1.2.3 From b17a7c179dd3ce7d04373fddf660eda21efc9db9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 10 May 2006 13:21:17 -0700 Subject: [NET]: Do sysfs registration as part of register_netdevice. The last step of netdevice registration was being done by a delayed call, but because it was delayed, it was impossible to return any error code if the class_device registration failed. Side effects: * one state in registration process is unnecessary. * register_netdevice can sleep inside class_device registration/hotplug * code in netdev_run_todo only does unregistration so it is simpler. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +-- net/core/dev.c | 63 ++++++++++++++++++++--------------------------- 2 files changed, 28 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a461b51d6076..f4169bbb60eb 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -433,8 +433,7 @@ struct net_device /* register/unregister state machine */ enum { NETREG_UNINITIALIZED=0, - NETREG_REGISTERING, /* called register_netdevice */ - NETREG_REGISTERED, /* completed register todo */ + NETREG_REGISTERED, /* completed register_netdevice */ NETREG_UNREGISTERING, /* called unregister_netdevice */ NETREG_UNREGISTERED, /* completed unregister todo */ NETREG_RELEASED, /* called free_netdev */ diff --git a/net/core/dev.c b/net/core/dev.c index ced57430f6d8..2dce673a039b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2777,6 +2777,8 @@ int register_netdevice(struct net_device *dev) BUG_ON(dev_boot_phase); ASSERT_RTNL(); + might_sleep(); + /* When net_device's are persistent, this will be fatal. */ BUG_ON(dev->reg_state != NETREG_UNINITIALIZED); @@ -2863,6 +2865,11 @@ int register_netdevice(struct net_device *dev) if (!dev->rebuild_header) dev->rebuild_header = default_rebuild_header; + ret = netdev_register_sysfs(dev); + if (ret) + goto out_err; + dev->reg_state = NETREG_REGISTERED; + /* * Default initial state at registry is that the * device is present. @@ -2878,14 +2885,11 @@ int register_netdevice(struct net_device *dev) hlist_add_head(&dev->name_hlist, head); hlist_add_head(&dev->index_hlist, dev_index_hash(dev->ifindex)); dev_hold(dev); - dev->reg_state = NETREG_REGISTERING; write_unlock_bh(&dev_base_lock); /* Notify protocols, that a new device appeared. */ raw_notifier_call_chain(&netdev_chain, NETDEV_REGISTER, dev); - /* Finish registration after unlock */ - net_set_todo(dev); ret = 0; out: @@ -3008,7 +3012,7 @@ static void netdev_wait_allrefs(struct net_device *dev) * * We are invoked by rtnl_unlock() after it drops the semaphore. * This allows us to deal with problems: - * 1) We can create/delete sysfs objects which invoke hotplug + * 1) We can delete sysfs objects which invoke hotplug * without deadlocking with linkwatch via keventd. * 2) Since we run with the RTNL semaphore not held, we can sleep * safely in order to wait for the netdev refcnt to drop to zero. @@ -3017,8 +3021,6 @@ static DEFINE_MUTEX(net_todo_run_mutex); void netdev_run_todo(void) { struct list_head list = LIST_HEAD_INIT(list); - int err; - /* Need to guard against multiple cpu's getting out of order. */ mutex_lock(&net_todo_run_mutex); @@ -3041,40 +3043,29 @@ void netdev_run_todo(void) = list_entry(list.next, struct net_device, todo_list); list_del(&dev->todo_list); - switch(dev->reg_state) { - case NETREG_REGISTERING: - err = netdev_register_sysfs(dev); - if (err) - printk(KERN_ERR "%s: failed sysfs registration (%d)\n", - dev->name, err); - dev->reg_state = NETREG_REGISTERED; - break; - - case NETREG_UNREGISTERING: - netdev_unregister_sysfs(dev); - dev->reg_state = NETREG_UNREGISTERED; - - netdev_wait_allrefs(dev); + if (unlikely(dev->reg_state != NETREG_UNREGISTERING)) { + printk(KERN_ERR "network todo '%s' but state %d\n", + dev->name, dev->reg_state); + dump_stack(); + continue; + } - /* paranoia */ - BUG_ON(atomic_read(&dev->refcnt)); - BUG_TRAP(!dev->ip_ptr); - BUG_TRAP(!dev->ip6_ptr); - BUG_TRAP(!dev->dn_ptr); + netdev_unregister_sysfs(dev); + dev->reg_state = NETREG_UNREGISTERED; + netdev_wait_allrefs(dev); - /* It must be the very last action, - * after this 'dev' may point to freed up memory. - */ - if (dev->destructor) - dev->destructor(dev); - break; + /* paranoia */ + BUG_ON(atomic_read(&dev->refcnt)); + BUG_TRAP(!dev->ip_ptr); + BUG_TRAP(!dev->ip6_ptr); + BUG_TRAP(!dev->dn_ptr); - default: - printk(KERN_ERR "network todo '%s' but state %d\n", - dev->name, dev->reg_state); - break; - } + /* It must be the very last action, + * after this 'dev' may point to freed up memory. + */ + if (dev->destructor) + dev->destructor(dev); } out: -- cgit v1.2.3 From 4c1b46226ce4424a93b8ac544e37afb26c8a72c6 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 10 May 2006 12:48:57 -0700 Subject: dl2k: use DMA_48BIT_MASK constant Typo will be harder with this one. Signed-off-by: Francois Romieu Signed-off-by: Stephen Hemminger --- drivers/net/dl2k.c | 12 ++++++------ include/linux/dma-mapping.h | 1 + 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 1f3627470c95..1ddefd281213 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -765,7 +765,7 @@ rio_free_tx (struct net_device *dev, int irq) break; skb = np->tx_skbuff[entry]; pci_unmap_single (np->pdev, - np->tx_ring[entry].fraginfo & 0xffffffffffff, + np->tx_ring[entry].fraginfo & DMA_48BIT_MASK, skb->len, PCI_DMA_TODEVICE); if (irq) dev_kfree_skb_irq (skb); @@ -893,7 +893,7 @@ receive_packet (struct net_device *dev) /* Small skbuffs for short packets */ if (pkt_len > copy_thresh) { pci_unmap_single (np->pdev, - desc->fraginfo & 0xffffffffffff, + desc->fraginfo & DMA_48BIT_MASK, np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put (skb = np->rx_skbuff[entry], pkt_len); @@ -901,7 +901,7 @@ receive_packet (struct net_device *dev) } else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) { pci_dma_sync_single_for_cpu(np->pdev, desc->fraginfo & - 0xffffffffffff, + DMA_48BIT_MASK, np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb->dev = dev; @@ -913,7 +913,7 @@ receive_packet (struct net_device *dev) skb_put (skb, pkt_len); pci_dma_sync_single_for_device(np->pdev, desc->fraginfo & - 0xffffffffffff, + DMA_48BIT_MASK, np->rx_buf_sz, PCI_DMA_FROMDEVICE); } @@ -1800,7 +1800,7 @@ rio_close (struct net_device *dev) skb = np->rx_skbuff[i]; if (skb) { pci_unmap_single(np->pdev, - np->rx_ring[i].fraginfo & 0xffffffffffff, + np->rx_ring[i].fraginfo & DMA_48BIT_MASK, skb->len, PCI_DMA_FROMDEVICE); dev_kfree_skb (skb); np->rx_skbuff[i] = NULL; @@ -1810,7 +1810,7 @@ rio_close (struct net_device *dev) skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pdev, - np->tx_ring[i].fraginfo & 0xffffffffffff, + np->tx_ring[i].fraginfo & DMA_48BIT_MASK, skb->len, PCI_DMA_TODEVICE); dev_kfree_skb (skb); np->tx_skbuff[i] = NULL; diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index ff61817082fa..635690cf3e3d 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -14,6 +14,7 @@ enum dma_data_direction { }; #define DMA_64BIT_MASK 0xffffffffffffffffULL +#define DMA_48BIT_MASK 0x0000ffffffffffffULL #define DMA_40BIT_MASK 0x000000ffffffffffULL #define DMA_39BIT_MASK 0x0000007fffffffffULL #define DMA_32BIT_MASK 0x00000000ffffffffULL -- cgit v1.2.3 From 986733e01d258c26107f1da9d8d47c718349ad2f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 15 May 2006 09:43:58 -0700 Subject: [PATCH] RCU: introduce rcu_needs_cpu() interface With "Paul E. McKenney" Introduce rcu_needs_cpu() interface. This can be used to tell if there will be a new rcu batch on a cpu soon by looking at the curlist pointer. This can be used to avoid to enter a tickless idle state where the cpu would miss that a new batch is ready when rcu_start_batch would be called on a different cpu. Signed-off-by: Heiko Carstens Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rcupdate.h | 1 + kernel/rcupdate.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 5673008b61e1..970284f571a6 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int cpu) } extern int rcu_pending(int cpu); +extern int rcu_needs_cpu(int cpu); /** * rcu_read_lock - mark the beginning of an RCU read-side critical section. diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 6d32ff26f948..2058f88c7bbb 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -479,12 +479,31 @@ static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp) return 0; } +/* + * Check to see if there is any immediate RCU-related work to be done + * by the current CPU, returning 1 if so. This function is part of the + * RCU implementation; it is -not- an exported member of the RCU API. + */ int rcu_pending(int cpu) { return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) || __rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu)); } +/* + * Check to see if any future RCU-related work will need to be done + * by the current CPU, even if none need be done immediately, returning + * 1 if so. This function is part of the RCU implementation; it is -not- + * an exported member of the RCU API. + */ +int rcu_needs_cpu(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + struct rcu_data *rdp_bh = &per_cpu(rcu_bh_data, cpu); + + return (!!rdp->curlist || !!rdp_bh->curlist || rcu_pending(cpu)); +} + void rcu_check_callbacks(int cpu, int user) { if (user || -- cgit v1.2.3 From 5e376613899076396d0c97de67ad072587267370 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 15 May 2006 09:44:06 -0700 Subject: [PATCH] symbol_put_addr() locks kernel Even since a previous patch: Fix race between CONFIG_DEBUG_SLABALLOC and modules Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000) http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe The function symbol_put_addr() will deadlock the kernel. symbol_put_addr() would acquire modlist_lock, then while holding the lock call two functions kernel_text_address() and module_text_address() which also try to acquire the same lock. This deadlocks the kernel of course. This patch changes symbol_put_addr() to not acquire the modlist_lock, it doesn't need it since it never looks at the module list directly. Also, it now uses core_kernel_text() instead of kernel_text_address(). The latter has an additional check for addr inside a module, but we don't need to do that since we call module_text_address() (the same function kernel_text_address uses) ourselves. Signed-off-by: Trent Piepho Cc: Zwane Mwaikambo Acked-by: Rusty Russell Cc: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 1 + kernel/extable.c | 2 +- kernel/module.c | 12 ++++++------ 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e1bd0842f6a1..f4fc576ed4c4 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -124,6 +124,7 @@ extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); extern unsigned long long memparse(char *ptr, char **retptr); +extern int core_kernel_text(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); extern int session_of_pgrp(int pgrp); diff --git a/kernel/extable.c b/kernel/extable.c index 7501b531ceed..7fe262855317 100644 --- a/kernel/extable.c +++ b/kernel/extable.c @@ -40,7 +40,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr) return e; } -static int core_kernel_text(unsigned long addr) +int core_kernel_text(unsigned long addr) { if (addr >= (unsigned long)_stext && addr <= (unsigned long)_etext) diff --git a/kernel/module.c b/kernel/module.c index d24deb0dbbc9..bbe04862e1b0 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -705,14 +705,14 @@ EXPORT_SYMBOL(__symbol_put); void symbol_put_addr(void *addr) { - unsigned long flags; + struct module *modaddr; - spin_lock_irqsave(&modlist_lock, flags); - if (!kernel_text_address((unsigned long)addr)) - BUG(); + if (core_kernel_text((unsigned long)addr)) + return; - module_put(module_text_address((unsigned long)addr)); - spin_unlock_irqrestore(&modlist_lock, flags); + if (!(modaddr = module_text_address((unsigned long)addr))) + BUG(); + module_put(modaddr); } EXPORT_SYMBOL_GPL(symbol_put_addr); -- cgit v1.2.3 From 39d24e64263cd3211705d3b61ea4171c65030921 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 15 May 2006 09:44:13 -0700 Subject: [PATCH] add slab_is_available() routine for boot code slab_is_available() indicates slab based allocators are available for use. SPARSEMEM code needs to know this as it can be called at various times during the boot process. Signed-off-by: Mike Kravetz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 1 + mm/slab.c | 8 ++++++++ mm/sparse.c | 2 +- 3 files changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 3af03b19c983..2d985d59c7b8 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) extern void kfree(const void *); extern unsigned int ksize(const void *); +extern int slab_is_available(void); #ifdef CONFIG_NUMA extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node); diff --git a/mm/slab.c b/mm/slab.c index c32af7e7581e..b1d643b5238d 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -700,6 +700,14 @@ static enum { FULL } g_cpucache_up; +/* + * used by boot code to determine if it can use slab based allocator + */ +int slab_is_available(void) +{ + return g_cpucache_up == FULL; +} + static DEFINE_PER_CPU(struct work_struct, reap_work); static void free_block(struct kmem_cache *cachep, void **objpp, int len, diff --git a/mm/sparse.c b/mm/sparse.c index d7c32de99ee8..c5e89eb9ac8f 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -32,7 +32,7 @@ static struct mem_section *sparse_index_alloc(int nid) unsigned long array_size = SECTIONS_PER_ROOT * sizeof(struct mem_section); - if (system_state == SYSTEM_RUNNING) + if (slab_is_available()) section = kmalloc_node(array_size, GFP_KERNEL, nid); else section = alloc_bootmem_node(NODE_DATA(nid), array_size); -- cgit v1.2.3 From e6333fd4ddf7a583480017f535b9ea53c116ab81 Mon Sep 17 00:00:00 2001 From: Hua Zhong Date: Mon, 15 May 2006 09:44:22 -0700 Subject: [PATCH] fix can_share_swap_page() when !CONFIG_SWAP can_share_swap_page() is used to check if the page has the last reference. This avoids allocating a new page for COW if it's the last page. However, if CONFIG_SWAP is not set, can_share_swap_page() is defined as 0, thus always causes a copy for the last COW page. The below simple patch fixes it. Signed-off-by: Hua Zhong Cc: David Howells Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/swap.h b/include/linux/swap.h index 5b1fdf1cff4f..f03c24719302 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -296,7 +296,7 @@ static inline void disable_swap_token(void) #define read_swap_cache_async(swp,vma,addr) NULL #define lookup_swap_cache(swp) NULL #define valid_swaphandles(swp, off) 0 -#define can_share_swap_page(p) 0 +#define can_share_swap_page(p) (page_mapcount(p) == 1) #define move_to_swap_cache(p, swp) 1 #define move_from_swap_cache(p, i, m) 1 #define __delete_from_swap_cache(p) /*NOTHING*/ -- cgit v1.2.3 From 4cff33f94fefcce1b3c01a9d1da6bb85fe3cbdfa Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 17 Feb 2006 10:02:18 -0800 Subject: [PATCH] SPI: per-transfer overrides for wordsize and clocking Some protocols (like one for some bitmap displays) require different clock speed or word size settings for each transfer in an SPI message. This adds those parameters to struct spi_transfer. They are to be used when they are nonzero; otherwise the defaults from spi_device are to be used. The patch also adds a setup_transfer callback to spi_bitbang, uses it for messages that use those overrides, and implements it so that the pure bitbanging code can help resolve any questions about how it should work. Signed-off-by: Imre Deak Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 77 +++++++++++++++++++++++++++++++++-------- include/linux/spi/spi.h | 8 +++++ include/linux/spi/spi_bitbang.h | 6 ++++ 3 files changed, 77 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index f037e5593269..0525c99118c3 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -138,6 +138,43 @@ static unsigned bitbang_txrx_32( return t->len - count; } +static int +bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + u8 bits_per_word; + u32 hz; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } else { + bits_per_word = 0; + hz = 0; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + if (bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* nsecs = (clock period)/2 */ + if (!hz) + hz = spi->max_speed_hz; + cs->nsecs = (1000000000/2) / hz; + if (cs->nsecs > MAX_UDELAY_MS * 1000) + return -EINVAL; + + return 0; +} + /** * spi_bitbang_setup - default setup for per-word I/O loops */ @@ -145,6 +182,7 @@ int spi_bitbang_setup(struct spi_device *spi) { struct spi_bitbang_cs *cs = spi->controller_state; struct spi_bitbang *bitbang; + int retval; if (!spi->max_speed_hz) return -EINVAL; @@ -160,25 +198,14 @@ int spi_bitbang_setup(struct spi_device *spi) if (!spi->bits_per_word) spi->bits_per_word = 8; - /* spi_transfer level calls that work per-word */ - if (spi->bits_per_word <= 8) - cs->txrx_bufs = bitbang_txrx_8; - else if (spi->bits_per_word <= 16) - cs->txrx_bufs = bitbang_txrx_16; - else if (spi->bits_per_word <= 32) - cs->txrx_bufs = bitbang_txrx_32; - else - return -EINVAL; - /* per-word shift register access, in hardware or bitbanging */ cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; if (!cs->txrx_word) return -EINVAL; - /* nsecs = (clock period)/2 */ - cs->nsecs = (1000000000/2) / (spi->max_speed_hz); - if (cs->nsecs > MAX_UDELAY_MS * 1000) - return -EINVAL; + retval = bitbang_transfer_setup(spi, NULL); + if (retval < 0) + return retval; dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), @@ -246,6 +273,8 @@ static void bitbang_work(void *_bitbang) unsigned tmp; unsigned cs_change; int status; + int (*setup_transfer)(struct spi_device *, + struct spi_transfer *); m = container_of(bitbang->queue.next, struct spi_message, queue); @@ -262,6 +291,7 @@ static void bitbang_work(void *_bitbang) tmp = 0; cs_change = 1; status = 0; + setup_transfer = NULL; list_for_each_entry (t, &m->transfers, transfer_list) { if (bitbang->shutdown) { @@ -269,6 +299,20 @@ static void bitbang_work(void *_bitbang) break; } + /* override or restore speed and wordsize */ + if (t->speed_hz || t->bits_per_word) { + setup_transfer = bitbang->setup_transfer; + if (!setup_transfer) { + status = -ENOPROTOOPT; + break; + } + } + if (setup_transfer) { + status = setup_transfer(spi, t); + if (status < 0) + break; + } + /* set up default clock polarity, and activate chip; * this implicitly updates clock and spi modes as * previously recorded for this device via setup(). @@ -325,6 +369,10 @@ static void bitbang_work(void *_bitbang) m->status = status; m->complete(m->context); + /* restore speed and wordsize */ + if (setup_transfer) + setup_transfer(spi, NULL); + /* normally deactivate chipselect ... unless no error and * cs_change has hinted that the next message will probably * be for this chip too. @@ -406,6 +454,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; if (!bitbang->master->setup) { + bitbang->setup_transfer = bitbang_transfer_setup; bitbang->master->setup = spi_bitbang_setup; bitbang->master->cleanup = spi_bitbang_cleanup; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b05f1463a267..caa4665e3fa2 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -31,6 +31,7 @@ extern struct bus_type spi_bus_type; * @master: SPI controller used with the device. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. + * The spi_transfer.speed_hz can override this for each transfer. * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. @@ -38,6 +39,7 @@ extern struct bus_type spi_bus_type; * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. + * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state @@ -268,6 +270,10 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) + * @speed_hz: Select a speed other then the device default for this + * transfer. If 0 the default (from spi_device) is used. + * @bits_per_word: select a bits_per_word other then the device default + * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting @@ -322,7 +328,9 @@ struct spi_transfer { dma_addr_t rx_dma; unsigned cs_change:1; + u8 bits_per_word; u16 delay_usecs; + u32 speed_hz; struct list_head transfer_list; }; diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c961fe9bf3eb..c954557b757c 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -30,6 +30,12 @@ struct spi_bitbang { struct spi_master *master; + /* setup_transfer() changes clock and/or wordsize to match settings + * for this transfer; zeroes restore defaults from spi_device. + */ + int (*setup_transfer)(struct spi_device *spi, + struct spi_transfer *t); + void (*chipselect)(struct spi_device *spi, int is_on); #define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ #define BITBANG_CS_INACTIVE 0 -- cgit v1.2.3 From 747d844ee9a183ff3067bb1181f2a25c50649538 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 2 Apr 2006 10:33:37 -0800 Subject: [PATCH] SPI: spi whitespace fixes This removes superfluous whitespace in the header. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index caa4665e3fa2..082006714b85 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -36,15 +36,15 @@ extern struct bus_type spi_bus_type; * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. * @bits_per_word: Data transfers involve one or more words; word sizes - * like eight or 12 bits are common. In-memory wordsizes are + * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive - * interrupts from this device. + * interrupts from this device. * @controller_state: Controller's runtime state * @controller_data: Board-specific definitions for controller, such as - * FIFO initialization parameters; from board_info.controller_data + * FIFO initialization parameters; from board_info.controller_data * * An spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -145,13 +145,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * struct spi_master - interface to SPI master controller * @cdev: class interface to this driver * @bus_num: board-specific (and often SOC-specific) identifier for a - * given SPI controller. + * given SPI controller. * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. + * SPI slaves, and are numbered from zero to num_chipselects. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. * @setup: updates the device mode and clocking records used by a - * device's SPI controller; protocol code may call this. + * device's SPI controller; protocol code may call this. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @@ -276,8 +276,8 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before - * (optionally) changing the chipselect status, then starting - * the next transfer or completing this spi_message. + * (optionally) changing the chipselect status, then starting + * the next transfer or completing this spi_message. * @transfer_list: transfers are sequenced through spi_message.transfers * * SPI transfers always write the same number of bytes as they read. @@ -364,7 +364,7 @@ struct spi_transfer { * and its transfers, ignore them until its completion callback. */ struct spi_message { - struct list_head transfers; + struct list_head transfers; struct spi_device *spi; @@ -382,7 +382,7 @@ struct spi_message { */ /* completion is reported through a callback */ - void (*complete)(void *context); + void (*complete)(void *context); void *context; unsigned actual_length; int status; -- cgit v1.2.3 From ff9f4771b5f017ee0f57629488b6cd7a6ef3d19b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 2 Apr 2006 16:06:35 -0500 Subject: [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it Renamed bitbang_transfer_setup to follow convention of other exported symbols from spi-bitbang. Exported spi_bitbang_setup_transfer to allow users of spi-bitbang to use the function in their own setup_transfer. Signed-off-by: Kumar Gala Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 10 ++++++---- include/linux/spi/spi_bitbang.h | 2 ++ 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 0525c99118c3..6c3da64d609a 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -138,8 +138,7 @@ static unsigned bitbang_txrx_32( return t->len - count; } -static int -bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) +int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { struct spi_bitbang_cs *cs = spi->controller_state; u8 bits_per_word; @@ -174,6 +173,7 @@ bitbang_transfer_setup(struct spi_device *spi, struct spi_transfer *t) return 0; } +EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer); /** * spi_bitbang_setup - default setup for per-word I/O loops @@ -203,7 +203,7 @@ int spi_bitbang_setup(struct spi_device *spi) if (!cs->txrx_word) return -EINVAL; - retval = bitbang_transfer_setup(spi, NULL); + retval = spi_bitbang_setup_transfer(spi, NULL); if (retval < 0) return retval; @@ -454,7 +454,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) bitbang->use_dma = 0; bitbang->txrx_bufs = spi_bitbang_bufs; if (!bitbang->master->setup) { - bitbang->setup_transfer = bitbang_transfer_setup; + if (!bitbang->setup_transfer) + bitbang->setup_transfer = + spi_bitbang_setup_transfer; bitbang->master->setup = spi_bitbang_setup; bitbang->master->cleanup = spi_bitbang_cleanup; } diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c954557b757c..16ce178f54d7 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -57,6 +57,8 @@ struct spi_bitbang { extern int spi_bitbang_setup(struct spi_device *spi); extern void spi_bitbang_cleanup(const struct spi_device *spi); extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); +extern int spi_bitbang_setup_transfer(struct spi_device *spi, + struct spi_transfer *t); /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); -- cgit v1.2.3 From ccf77cc4af5b048e20cfd9327fcc286cb69c34cc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:46:22 -0700 Subject: [PATCH] SPI: devices can require LSB-first encodings Add spi_device hook for LSB-first word encoding, and update all the (in-tree) controller drivers to reject such devices. Eventually, some controller drivers will be updated to support lsb-first encodings on the wire; no current drivers need this. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi_bitbang.c | 11 ++++++++++- include/linux/spi/spi.h | 7 +++++-- 2 files changed, 15 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c index 6c3da64d609a..0f7f5c64391c 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi_bitbang.c @@ -187,13 +187,22 @@ int spi_bitbang_setup(struct spi_device *spi) if (!spi->max_speed_hz) return -EINVAL; + bitbang = spi_master_get_devdata(spi->master); + + /* REVISIT: some systems will want to support devices using lsb-first + * bit encodings on the wire. In pure software that would be trivial, + * just bitbang_txrx_le_cphaX() routines shifting the other way, and + * some hardware controllers also have this support. + */ + if ((spi->mode & SPI_LSB_FIRST) != 0) + return -EINVAL; + if (!cs) { cs = kzalloc(sizeof *cs, SLAB_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; } - bitbang = spi_master_get_devdata(spi->master); if (!spi->bits_per_word) spi->bits_per_word = 8; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 082006714b85..77add901691d 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -35,10 +35,13 @@ extern struct bus_type spi_bus_type; * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. + * The "active low" default for chipselect mode can be overridden, + * as can the "MSB first" default for each word in a transfer. * @bits_per_word: Data transfers involve one or more words; word sizes * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). - * This may be changed by the device's driver. + * This may be changed by the device's driver, or left at the + * default (0) indicating protocol words are eight bit bytes. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. @@ -67,6 +70,7 @@ struct spi_device { #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) #define SPI_CS_HIGH 0x04 /* chipselect active high? */ +#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ u8 bits_per_word; int irq; void *controller_state; @@ -75,7 +79,6 @@ struct spi_device { // likely need more hooks for more protocol options affecting how // the controller talks to each chip, like: - // - bit order (default is wordwise msb-first) // - memory packing (12 bit samples into low bits, others zeroed) // - priority // - drop chipselect after each word -- cgit v1.2.3 From a020ed7521a9737bcf3e34eb880867c60c3c68d0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:49:04 -0700 Subject: [PATCH] SPI: busnum == 0 needs to work We need to be able to have a "SPI bus 0" matching chip numbering; but that number was wrongly used to flag dynamic allocation of a bus number. This patch resolves that issue; now negative numbers trigger dynamic alloc. It also updates the how-to-write-a-controller-driver overview to mention this stuff. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/spi/spi-summary | 34 +++++++++++++++++++++++++++++++++- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 6 +++--- 3 files changed, 38 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index a5ffba33a351..068732d32276 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -414,7 +414,33 @@ to get the driver-private data allocated for that device. The driver will initialize the fields of that spi_master, including the bus number (maybe the same as the platform device ID) and three methods used to interact with the SPI core and SPI protocol drivers. It will -also initialize its own internal state. +also initialize its own internal state. (See below about bus numbering +and those methods.) + +After you initialize the spi_master, then use spi_register_master() to +publish it to the rest of the system. At that time, device nodes for +the controller and any predeclared spi devices will be made available, +and the driver model core will take care of binding them to drivers. + +If you need to remove your SPI controller driver, spi_unregister_master() +will reverse the effect of spi_register_master(). + + +BUS NUMBERING + +Bus numbering is important, since that's how Linux identifies a given +SPI bus (shared SCK, MOSI, MISO). Valid bus numbers start at zero. On +SOC systems, the bus numbers should match the numbers defined by the chip +manufacturer. For example, hardware controller SPI2 would be bus number 2, +and spi_board_info for devices connected to it would use that number. + +If you don't have such hardware-assigned bus number, and for some reason +you can't just assign them, then provide a negative bus number. That will +then be replaced by a dynamically assigned number. You'd then need to treat +this as a non-static configuration (see above). + + +SPI MASTER METHODS master->setup(struct spi_device *spi) This sets up the device clock rate, SPI mode, and word sizes. @@ -431,6 +457,9 @@ also initialize its own internal state. state it dynamically associates with that device. If you do that, be sure to provide the cleanup() method to free that state. + +SPI MESSAGE QUEUE + The bulk of the driver will be managing the I/O queue fed by transfer(). That queue could be purely conceptual. For example, a driver used only @@ -440,6 +469,9 @@ But the queue will probably be very real, using message->queue, PIO, often DMA (especially if the root filesystem is in SPI flash), and execution contexts like IRQ handlers, tasklets, or workqueues (such as keventd). Your driver can be as fancy, or as simple, as you need. +Such a transfer() method would normally just add the message to a +queue, and then start some asynchronous transfer engine (unless it's +already running). THANKS TO diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1168ef015887..7a3f733051e9 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master); int __init_or_module spi_register_master(struct spi_master *master) { - static atomic_t dyn_bus_id = ATOMIC_INIT(0); + static atomic_t dyn_bus_id = ATOMIC_INIT((1<<16) - 1); struct device *dev = master->cdev.dev; int status = -ENODEV; int dynamic = 0; @@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master) return -ENODEV; /* convention: dynamically assigned bus IDs count down from the max */ - if (master->bus_num == 0) { + if (master->bus_num < 0) { master->bus_num = atomic_dec_return(&dyn_bus_id); dynamic = 1; } diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 77add901691d..e928c0dcc297 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -172,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) struct spi_master { struct class_device cdev; - /* other than zero (== assign one dynamically), bus_num is fully + /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. - * example: one SOC has three SPI controllers, numbered 1..3, + * example: one SOC has three SPI controllers, numbered 0..2, * and one board's schematics might show it using SPI-2. software * would normally use bus_num=2 for that controller. */ - u16 bus_num; + s16 bus_num; /* chipselects will be integral to many controllers; some others * might use board-specific GPIOs. -- cgit v1.2.3 From 2c171bf13423dc5293188cea7f6c2da1720926e2 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 19 May 2006 21:48:03 +0100 Subject: [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups Patch from Pavel Pisa There has been problems that for some paths that clock are not stopped during new command programming and initiation. Result is issuing of incorrect command to the card. Some other problems are cleaned too. Noisy report of known ERRATUM #4 has been suppressed. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- drivers/mmc/au1xmmc.c | 6 +++--- drivers/mmc/imxmmc.c | 24 ++++++++++++++---------- drivers/mmc/mmc.c | 1 + drivers/mmc/mmc_block.c | 1 + drivers/mmc/pxamci.c | 4 ++-- drivers/mmc/wbsd.c | 8 ++++---- include/linux/mmc/mmc.h | 1 + 7 files changed, 26 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 914d62b24064..5dc4bee7abeb 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) } else data->bytes_xfered = - (data->blocks * (1 << data->blksz_bits)) - + (data->blocks * data->blksz) - host->pio.len; } @@ -575,7 +575,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) { - int datalen = data->blocks * (1 << data->blksz_bits); + int datalen = data->blocks * data->blksz; if (dma != 0) host->flags |= HOST_F_DMA; @@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) if (host->dma.len == 0) return MMC_ERR_TIMEOUT; - au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host)); + au_writel(data->blksz - 1, HOST_BLKSIZE(host)); if (host->flags & HOST_F_DMA) { int i; diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 79358e223f57..a4eb1d0e7a71 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host, if(!loops) return 0; - dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); + /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ + if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000)) + dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", + loops, where, *pstat, stat_mask); return loops; } @@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, WARN_ON(host->cmd != NULL); host->cmd = cmd; + /* Ensure, that clock are stopped else command programming and start fails */ + imxmci_stop_clock(host); + if (cmd->flags & MMC_RSP_BUSY) cmdat |= CMD_DAT_CONT_BUSY; @@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) int trans_done = 0; unsigned int stat = *pstat; - if(host->actual_bus_width == MMC_BUS_WIDTH_4) + if(host->actual_bus_width != MMC_BUS_WIDTH_4) burst_len = 16; else burst_len = 64; @@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) stat = MMC_STATUS; /* Flush extra bytes from FIFO */ - while(flush_len >= 2){ - flush_len -= 2; + while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ i = MMC_BUFFER_ACCESS; stat = MMC_STATUS; stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ @@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data) data_dir_mask = STATUS_DATA_TRANS_DONE; } - imxmci_busy_wait_for_status(host, &stat, - data_dir_mask, - 50, "imxmci_tasklet_fnc data"); - if(stat & data_dir_mask) { clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); imxmci_data_done(host, stat); @@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) imxmci_stop_clock(host); MMC_CLK_RATE = (prescaler<<3) | clk; - imxmci_start_clock(host); + /* + * Under my understanding, clock should not be started there, because it would + * initiate SDHC sequencer and send last or random command into card + */ + /*imxmci_start_clock(host);*/ dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE); } else { diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1ca2c8b9c9b5..6201f3086a02 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host) data.timeout_ns = card->csd.tacc_ns * 10; data.timeout_clks = card->csd.tacc_clks * 10; data.blksz_bits = 3; + data.blksz = 1 << 3; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 06bd1f4cb9b1..e39cc05c64c2 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.timeout_ns = card->csd.tacc_ns * 10; brq.data.timeout_clks = card->csd.tacc_clks * 10; brq.data.blksz_bits = md->block_bits; + brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); brq.stop.opcode = MMC_STOP_TRANSMISSION; brq.stop.arg = 0; diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index f97b472085cb..b49368fd96b8 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) nob = 0xffff; writel(nob, host->base + MMC_NOB); - writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); + writel(data->blksz, host->base + MMC_BLKLEN); clks = (unsigned long long)data->timeout_ns * CLOCKRATE; do_div(clks, 1000000000UL); @@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) * data blocks as being in error. */ if (data->error == MMC_ERR_NONE) - data->bytes_xfered = data->blocks << data->blksz_bits; + data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 39b3d97f891e..8167332d4013 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) unsigned long dmaflags; DBGF("blksz %04x blks %04x flags %08x\n", - 1 << data->blksz_bits, data->blocks, data->flags); + data->blksz, data->blocks, data->flags); DBGF("tsac %d ms nsac %d clk\n", data->timeout_ns / 1000000, data->timeout_clks); /* * Calculate size. */ - host->size = data->blocks << data->blksz_bits; + host->size = data->blocks * data->blksz; /* * Check timeout values for overflow. @@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) * Two bytes are needed for each data line. */ if (host->bus_width == MMC_BUS_WIDTH_1) { - blksize = (1 << data->blksz_bits) + 2; + blksize = data->blksz + 2; wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0); wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); } else if (host->bus_width == MMC_BUS_WIDTH_4) { - blksize = (1 << data->blksz_bits) + 2 * 4; + blksize = data->blksz + 2 * 4; wbsd_write_index(host, WBSD_IDX_PBSMSB, ((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index bdc556d88498..03a14a30c46a 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -69,6 +69,7 @@ struct mmc_data { unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */ unsigned int timeout_clks; /* data timeout (in clocks) */ unsigned int blksz_bits; /* data block size */ + unsigned int blksz; /* data block size */ unsigned int blocks; /* number of blocks */ unsigned int error; /* data error */ unsigned int flags; -- cgit v1.2.3