From 743fcce0a89e04dc511b4ea40eba8e3f7cec92d4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 2 Jun 2013 01:33:56 +0400 Subject: ehci-platform: add pre_setup() method to platform data Sometimes there is a need to initialize some non-standard registers mapped to the EHCI region before accessing the standard EHCI registers. Add pre_setup() method with 'struct usb_hcd *' parameter to be called just before ehci_setup() to the 'ehci-platform' driver's platform data for this purpose... While at it, add the missing incomplete declaration of 'struct platform_device' to ... The patch has been tested on the Marzen and BOCK-W boards. Suggested-by: Alan Stern Signed-off-by: Sergei Shtylyov Acked-by: Kuninori Morimoto Acked-by: Alan Stern Signed-off-by: Simon Horman --- include/linux/usb/ehci_pdriver.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index 99238b096f7e..7eb4dcd0d386 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -19,6 +19,9 @@ #ifndef __USB_CORE_EHCI_PDRIVER_H #define __USB_CORE_EHCI_PDRIVER_H +struct platform_device; +struct usb_hcd; + /** * struct usb_ehci_pdata - platform_data for generic ehci driver * @@ -50,6 +53,7 @@ struct usb_ehci_pdata { /* Turn on only VBUS suspend power and hotplug detection, * turn off everything else */ void (*power_suspend)(struct platform_device *pdev); + int (*pre_setup)(struct usb_hcd *hcd); }; #endif /* __USB_CORE_EHCI_PDRIVER_H */ -- cgit v1.2.3 From 6a82e2a83e568dc121326b4bab24035ce7a2f50e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 2 Jun 2013 01:52:28 +0400 Subject: phy-rcar-usb: add platform data Currently the driver hard-codes USBPCTRL0 register to 0. It is wrong since this register contains board-specific USB ports configuration and so its value should be somehow passed via the platform data. Add the global header file containing 'struct rcar_phy_platform_data' consisting of the various bit fields describing USB ports' pin configuration. Signed-off-by: Sergei Shtylyov Acked-by: Kuninori Morimoto Acked-by: Felipe Balbi Signed-off-by: Simon Horman --- include/linux/platform_data/usb-rcar-phy.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/platform_data/usb-rcar-phy.h (limited to 'include/linux') diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h new file mode 100644 index 000000000000..c49f35ab14c7 --- /dev/null +++ b/include/linux/platform_data/usb-rcar-phy.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_PHY_H +#define __USB_RCAR_PHY_H + +#include + +struct rcar_phy_platform_data { + bool port1_func:1; /* true: port 1 used by function, false: host */ + unsigned penc1:1; /* Output of the PENC1 pin in function mode */ + struct { /* Overcurrent pin control for ports 0..2 */ + bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */ + /* Set to false on port 1 in function mode */ + bool active_high:1; /* true: active high, false: active low */ + /* Set to true on port 1 in function mode */ + } ovc_pin[3]; +}; + +#endif /* __USB_RCAR_PHY_H */ -- cgit v1.2.3 From 54407f190c8d542572a9547ba5460d811810b6e4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 9 Jun 2013 00:34:36 +0400 Subject: phy-rcar-usb: add R8A7778 support The driver currently only supports R8A7779 SoC. Compared to it, R8A7778 USB-PHY has extra register range containing two high-speed signal quality characteristic control registers which should be set up during USB-PHY startup depending on whether a ferrite bead is in use or not. So, we now handle an optional second memory range in the driver's probe method, add the 'ferrite_bead' field to the driver's platform data, and add an extra (optional) step to the USB-PHY startup routine which sets up the extended registers. Also mark in the driver's Kconfig section that R8A7778 is now supported and generally clarify that section, uppercasing the word "phy" and also changing the module name that got lost in the big driver rename, while at it... The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov Acked-by: Felipe Balbi Signed-off-by: Simon Horman --- drivers/usb/phy/Kconfig | 10 ++++---- drivers/usb/phy/phy-rcar-usb.c | 37 +++++++++++++++++++++++++----- include/linux/platform_data/usb-rcar-phy.h | 4 +++- 3 files changed, 39 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 371d0e74e909..ac0b98f78c70 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -181,15 +181,15 @@ config USB_MXS_PHY MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. config USB_RCAR_PHY - tristate "Renesas R-Car USB phy support" + tristate "Renesas R-Car USB PHY support" depends on USB || USB_GADGET help - Say Y here to add support for the Renesas R-Car USB phy driver. - This chip is typically used as USB phy for USB host, gadget. - This driver supports: R8A7779 + Say Y here to add support for the Renesas R-Car USB common PHY driver. + This chip is typically used as USB PHY for USB host, gadget. + This driver supports R8A7778 and R8A7779. To compile this driver as a module, choose M here: the - module will be called rcar-phy. + module will be called phy-rcar-usb. config USB_ULPI bool "Generic ULPI Transceiver Driver" diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index 823b2bb807d2..ae909408958d 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -26,15 +26,21 @@ #define USBOH0 0x1C #define USBCTL0 0x58 +/* High-speed signal quality characteristic control registers (R8A7778 only) */ +#define HSQCTL1 0x24 +#define HSQCTL2 0x28 + /* USBPCTRL0 */ -#define OVC2 (1 << 10) /* Switches the OVC input pin for port 2: */ +#define OVC2 (1 << 10) /* (R8A7779 only) */ + /* Switches the OVC input pin for port 2: */ /* 1: USB_OVC2, 0: OVC2 */ #define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */ /* 1: USB_OVC1, 0: OVC1/VBUS1 */ /* Function mode: set to 0 */ #define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */ /* 1: USB_OVC0 pin, 0: OVC0 */ -#define OVC2_ACT (1 << 6) /* Host mode: OVC2 polarity: */ +#define OVC2_ACT (1 << 6) /* (R8A7779 only) */ + /* Host mode: OVC2 polarity: */ /* 1: active-high, 0: active-low */ #define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */ /* 1: high, 0: low */ @@ -59,6 +65,7 @@ struct rcar_usb_phy_priv { spinlock_t lock; void __iomem *reg0; + void __iomem *reg1; int counter; }; @@ -78,6 +85,7 @@ static int rcar_usb_phy_init(struct usb_phy *phy) struct device *dev = phy->dev; struct rcar_phy_platform_data *pdata = dev->platform_data; void __iomem *reg0 = priv->reg0; + void __iomem *reg1 = priv->reg1; static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT }; int i; u32 val; @@ -96,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy) /* (2) start USB-PHY internal PLL */ iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); - /* (3) USB module status check */ + /* (3) set USB-PHY in accord with the conditions of usage */ + if (reg1) { + u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0; + u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7; + + iowrite32(hsqctl1, reg1 + HSQCTL1); + iowrite32(hsqctl2, reg1 + HSQCTL2); + } + + /* (4) USB module status check */ for (i = 0; i < 1024; i++) { udelay(10); val = ioread32(reg0 + USBST); @@ -109,7 +126,7 @@ static int rcar_usb_phy_init(struct usb_phy *phy) goto phy_init_end; } - /* (4) USB-PHY reset clear */ + /* (5) USB-PHY reset clear */ iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); /* Board specific port settings */ @@ -162,9 +179,9 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy) static int rcar_usb_phy_probe(struct platform_device *pdev) { struct rcar_usb_phy_priv *priv; - struct resource *res0; + struct resource *res0, *res1; struct device *dev = &pdev->dev; - void __iomem *reg0; + void __iomem *reg0, *reg1 = NULL; int ret; if (!pdev->dev.platform_data) { @@ -182,6 +199,13 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(reg0)) return PTR_ERR(reg0); + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res1) { + reg1 = devm_ioremap_resource(dev, res1); + if (IS_ERR(reg1)) + return PTR_ERR(reg1); + } + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) { dev_err(dev, "priv data allocation error\n"); @@ -189,6 +213,7 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) } priv->reg0 = reg0; + priv->reg1 = reg1; priv->counter = 0; priv->phy.dev = dev; priv->phy.label = dev_name(dev); diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h index c49f35ab14c7..8ec6964a32a5 100644 --- a/include/linux/platform_data/usb-rcar-phy.h +++ b/include/linux/platform_data/usb-rcar-phy.h @@ -13,6 +13,8 @@ #include struct rcar_phy_platform_data { + bool ferrite_bead:1; /* (R8A7778 only) */ + bool port1_func:1; /* true: port 1 used by function, false: host */ unsigned penc1:1; /* Output of the PENC1 pin in function mode */ struct { /* Overcurrent pin control for ports 0..2 */ @@ -20,7 +22,7 @@ struct rcar_phy_platform_data { /* Set to false on port 1 in function mode */ bool active_high:1; /* true: active high, false: active low */ /* Set to true on port 1 in function mode */ - } ovc_pin[3]; + } ovc_pin[3]; /* (R8A7778 only has 2 ports) */ }; #endif /* __USB_RCAR_PHY_H */ -- cgit v1.2.3