From b8a6d9980f75cf5401a5ab23834eace1cb23c4f1 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 14 Sep 2012 10:35:54 +0800 Subject: dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h The header ipu.h really belongs to dma subsystem rather than imx platform. Rename it to ipu-dma.h and put it into include/linux/dma/. Signed-off-by: Shawn Guo Acked-by: Guennadi Liakhovetski Acked-by: Sascha Hauer Acked-by: Arnd Bergmann Cc: Vinod Koul Cc: Florian Tobias Schandinat Cc: linux-media@vger.kernel.org Cc: linux-fbdev@vger.kernel.org --- include/linux/dma/ipu-dma.h | 177 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 include/linux/dma/ipu-dma.h (limited to 'include/linux') diff --git a/include/linux/dma/ipu-dma.h b/include/linux/dma/ipu-dma.h new file mode 100644 index 000000000000..18031115c668 --- /dev/null +++ b/include/linux/dma/ipu-dma.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_DMA_IPU_DMA_H +#define __LINUX_DMA_IPU_DMA_H + +#include +#include + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif /* __LINUX_DMA_IPU_DMA_H */ -- cgit v1.2.3 From e51d0f0ac4b7f513808743c6a62f0387eebd0144 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 15 Sep 2012 21:11:28 +0800 Subject: dma: imx-dma: remove cpu_is_xxx by using platform_device_id It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer Acked-by: Arnd Bergmann Tested-by: Javier Martin Cc: Vinod Koul --- arch/arm/mach-imx/clk-imx1.c | 3 +- arch/arm/mach-imx/clk-imx21.c | 4 +-- arch/arm/mach-imx/clk-imx27.c | 4 +-- arch/arm/mach-imx/devices/devices-common.h | 2 +- arch/arm/mach-imx/devices/platform-imx-dma.c | 4 +-- arch/arm/mach-imx/mm-imx1.c | 3 +- arch/arm/mach-imx/mm-imx21.c | 3 +- arch/arm/mach-imx/mm-imx27.c | 3 +- drivers/dma/imx-dma.c | 54 ++++++++++++++++++++++++---- include/linux/platform_data/dma-imx.h | 4 ++- 10 files changed, 66 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 1cc7a735ed19..49a74440bc48 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -83,7 +83,8 @@ int __init mx1_clocks_init(unsigned long fref) pr_err("imx1 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma"); + clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); + clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); clk_register_clkdev(clk[mma_gate], "mma", NULL); clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 96a4788032d1..8aec572f84fe 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -163,8 +163,8 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0"); clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0"); clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0"); - clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma"); + clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0"); clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 86a0c4262471..a5f0e3b6dec6 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -242,8 +242,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0"); clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma"); + clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0"); clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0"); diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index e4368f6c5fb4..36eb3f09f5d7 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -329,7 +329,7 @@ struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); -struct platform_device *imx_add_imx_dma(resource_size_t iobase, +struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c index f9003e4d0f57..ccdb5dc4ddbd 100644 --- a/arch/arm/mach-imx/devices/platform-imx-dma.c +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -8,7 +8,7 @@ */ #include "devices-common.h" -struct platform_device __init __maybe_unused *imx_add_imx_dma( +struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err) { struct resource res[] = { @@ -28,7 +28,7 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma( }; return platform_device_register_resndata(&mxc_ahb_bus, - "imx-dma", -1, res, ARRAY_SIZE(res), NULL, 0); + name, -1, res, ARRAY_SIZE(res), NULL, 0); } struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 9de81bf6de96..79f6c0b8f69f 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -60,6 +60,7 @@ void __init imx1_soc_init(void) MX1_GPIO_INT_PORTC, 0); mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTD, 0); - imx_add_imx_dma(MX1_DMA_BASE_ADDR, MX1_DMA_INT, MX1_DMA_ERR); + imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, + MX1_DMA_INT, MX1_DMA_ERR); pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 1c295154c296..3b97ea63b5fb 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -90,7 +90,8 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(MX21_DMA_BASE_ADDR, MX21_INT_DMACH0, 0); /* No ERR irq */ + imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, + MX21_INT_DMACH0, 0); /* No ERR irq */ platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index d389f4af33c0..91e8da832810 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -91,7 +91,8 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(MX27_DMA_BASE_ADDR, MX27_INT_DMACH0, 0); /* No ERR irq */ + imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, + MX27_INT_DMACH0, 0); /* No ERR irq */ /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 88e8a8d89b56..a3a8270e76fb 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -29,7 +29,6 @@ #include #include -#include #include "dmaengine.h" #define IMXDMA_MAX_CHAN_DESCRIPTORS 16 @@ -167,6 +166,12 @@ struct imxdma_channel { int slot_2d; }; +enum imx_dma_type { + IMX1_DMA, + IMX21_DMA, + IMX27_DMA, +}; + struct imxdma_engine { struct device *dev; struct device_dma_parameters dma_parms; @@ -177,8 +182,40 @@ struct imxdma_engine { spinlock_t lock; struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS]; struct imxdma_channel channel[IMX_DMA_CHANNELS]; + enum imx_dma_type devtype; }; +static struct platform_device_id imx_dma_devtype[] = { + { + .name = "imx1-dma", + .driver_data = IMX1_DMA, + }, { + .name = "imx21-dma", + .driver_data = IMX21_DMA, + }, { + .name = "imx27-dma", + .driver_data = IMX27_DMA, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_dma_devtype); + +static inline int is_imx1_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX1_DMA; +} + +static inline int is_imx21_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX21_DMA; +} + +static inline int is_imx27_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX27_DMA; +} + static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan) { return container_of(chan, struct imxdma_channel, chan); @@ -212,7 +249,9 @@ static unsigned imx_dmav1_readl(struct imxdma_engine *imxdma, unsigned offset) static int imxdma_hw_chain(struct imxdma_channel *imxdmac) { - if (cpu_is_mx27()) + struct imxdma_engine *imxdma = imxdmac->imxdma; + + if (is_imx27_dma(imxdma)) return imxdmac->hw_chaining; else return 0; @@ -267,7 +306,7 @@ static void imxdma_enable_hw(struct imxdma_desc *d) imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) | CCR_CEN | CCR_ACRPT, DMA_CCR(channel)); - if ((cpu_is_mx21() || cpu_is_mx27()) && + if (!is_imx1_dma(imxdma) && d->sg && imxdma_hw_chain(imxdmac)) { d->sg = sg_next(d->sg); if (d->sg) { @@ -436,7 +475,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) struct imxdma_engine *imxdma = dev_id; int i, disr; - if (cpu_is_mx21() || cpu_is_mx27()) + if (!is_imx1_dma(imxdma)) imxdma_err_handler(irq, dev_id); disr = imx_dmav1_readl(imxdma, DMA_DISR); @@ -967,6 +1006,8 @@ static int __init imxdma_probe(struct platform_device *pdev) if (!imxdma) return -ENOMEM; + imxdma->devtype = pdev->id_entry->driver_data; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); imxdma->base = devm_request_and_ioremap(&pdev->dev, res); if (!imxdma->base) @@ -990,7 +1031,7 @@ static int __init imxdma_probe(struct platform_device *pdev) /* reset DMA module */ imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR); - if (cpu_is_mx1()) { + if (is_imx1_dma(imxdma)) { ret = devm_request_irq(&pdev->dev, irq, dma_irq_handler, 0, "DMA", imxdma); if (ret) { @@ -1038,7 +1079,7 @@ static int __init imxdma_probe(struct platform_device *pdev) for (i = 0; i < IMX_DMA_CHANNELS; i++) { struct imxdma_channel *imxdmac = &imxdma->channel[i]; - if (cpu_is_mx21() || cpu_is_mx27()) { + if (!is_imx1_dma(imxdma)) { ret = devm_request_irq(&pdev->dev, irq + i, dma_irq_handler, 0, "DMA", imxdma); if (ret) { @@ -1118,6 +1159,7 @@ static struct platform_driver imxdma_driver = { .driver = { .name = "imx-dma", }, + .id_table = imx_dma_devtype, .remove = __exit_p(imxdma_remove), }; diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 1b9080385b46..f6d30cc1cb77 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -61,7 +61,9 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); + !strcmp(dev_name(chan->device->dev), "imx1-dma") || + !strcmp(dev_name(chan->device->dev), "imx21-dma") || + !strcmp(dev_name(chan->device->dev), "imx27-dma"); } #endif -- cgit v1.2.3 From 1e66210a3135b544713a9455e78e36f6f8d1bf77 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 16 Sep 2012 22:16:44 +0800 Subject: ARM: imx: remove header file mach/irqs.h The only mach/irqs.h user outside arch/arm/mach-imx is sound/soc/fsl/imx-pcm-fiq.c, which refers to mxc_set_irq_fiq(). Move the declaration into include/linux/platform_data/asoc-imx-ssi.h, so that we can remove mach/irqs.h includsion from imx-pcm-fiq.c. Inside arch/arm/mach-imx, the only users to mach/irqs.h are avic.c and tzic.c for referring to macro FIQ_START. Let's move the macro into irq-common.h and get rid of mach/irqs.h completely. Signed-off-by: Shawn Guo Acked-by: Sascha Hauer Acked-by: Arnd Bergmann Acked-by: Mark Brown Cc: alsa-devel@alsa-project.org --- arch/arm/mach-imx/avic.c | 1 - arch/arm/mach-imx/include/mach/irqs.h | 21 --------------------- arch/arm/mach-imx/irq-common.h | 3 +++ arch/arm/mach-imx/tzic.c | 2 -- include/linux/platform_data/asoc-imx-ssi.h | 2 ++ sound/soc/fsl/imx-pcm-fiq.c | 1 - 6 files changed, 5 insertions(+), 25 deletions(-) delete mode 100644 arch/arm/mach-imx/include/mach/irqs.h (limited to 'include/linux') diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index adc64bc5b343..0eff23ed92b9 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "common.h" #include "hardware.h" diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h deleted file mode 100644 index d73f5e8ea9cb..000000000000 --- a/arch/arm/mach-imx/include/mach/irqs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch between IRQ and FIQ */ -extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/mach-imx/irq-common.h b/arch/arm/mach-imx/irq-common.h index 6ccb3a14c693..5b2dabba330f 100644 --- a/arch/arm/mach-imx/irq-common.h +++ b/arch/arm/mach-imx/irq-common.h @@ -19,6 +19,9 @@ #ifndef __PLAT_MXC_IRQ_COMMON_H__ #define __PLAT_MXC_IRQ_COMMON_H__ +/* all normal IRQs can be FIQs */ +#define FIQ_START 0 + struct mxc_extra_irq { int (*set_priority)(unsigned char irq, unsigned char prio); diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index c7625b4a916b..9721161f208f 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -21,8 +21,6 @@ #include #include -#include - #include "common.h" #include "hardware.h" #include "irq-common.h" diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h index 63f3c2804239..92c7fd72f636 100644 --- a/include/linux/platform_data/asoc-imx-ssi.h +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -17,5 +17,7 @@ struct imx_ssi_platform_data { void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + #endif /* __MACH_SSI_H */ diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index 22c6130957ba..9ffc9e66308f 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -29,7 +29,6 @@ #include -#include #include #include "imx-ssi.h" -- cgit v1.2.3 From 2eb2478d471e45e1d0c8bb3defbf82bf7204e13d Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 5 Oct 2012 13:04:40 -0400 Subject: uio: uio_pruss: replace private SRAM API with genalloc Remove the use of the private DaVinci SRAM API in favor of genalloc. The pool to be used is provided by platform data. Signed-off-by: Matt Porter Signed-off-by: "Hans J. Koch" Signed-off-by: Sekhar Nori --- drivers/uio/Kconfig | 1 + drivers/uio/uio_pruss.c | 24 +++++++++++++++++------- include/linux/platform_data/uio_pruss.h | 3 ++- 3 files changed, 20 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 6f3ea9bbc818..c48b93813fc1 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -97,6 +97,7 @@ config UIO_NETX config UIO_PRUSS tristate "Texas Instruments PRUSS driver" depends on ARCH_DAVINCI_DA850 + select GENERIC_ALLOCATOR help PRUSS driver for OMAPL138/DA850/AM18XX devices PRUSS driver requires user space components, examples and user space diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 33a7a273b453..f8738de342be 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -65,10 +65,11 @@ struct uio_pruss_dev { dma_addr_t sram_paddr; dma_addr_t ddr_paddr; void __iomem *prussio_vaddr; - void *sram_vaddr; + unsigned long sram_vaddr; void *ddr_vaddr; unsigned int hostirq_start; unsigned int pintc_base; + struct gen_pool *sram_pool; }; static irqreturn_t pruss_handler(int irq, struct uio_info *info) @@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev, gdev->ddr_paddr); } if (gdev->sram_vaddr) - sram_free(gdev->sram_vaddr, sram_pool_sz); + gen_pool_free(gdev->sram_pool, + gdev->sram_vaddr, + sram_pool_sz); kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -152,10 +155,17 @@ static int __devinit pruss_probe(struct platform_device *dev) goto out_free; } - gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr)); - if (!gdev->sram_vaddr) { - dev_err(&dev->dev, "Could not allocate SRAM pool\n"); - goto out_free; + if (pdata->sram_pool) { + gdev->sram_pool = pdata->sram_pool; + gdev->sram_vaddr = + gen_pool_alloc(gdev->sram_pool, sram_pool_sz); + if (!gdev->sram_vaddr) { + dev_err(&dev->dev, "Could not allocate SRAM pool\n"); + goto out_free; + } + gdev->sram_paddr = + gen_pool_virt_to_phys(gdev->sram_pool, + gdev->sram_vaddr); } gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz, diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140aabc6f..3d47d219827f 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ -- cgit v1.2.3 From 873e698067cfa21420576632e1c3387c0f90ce4a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 31 Oct 2012 09:54:56 -0700 Subject: ARM: OMAP: Remove NEED_MACH_GPIO_H Omap no longer needs this option, mach/gpio.h is empty. Also remove mach/irqs.h from gpio-omap.h and include it directly from the related omap1 gpio init files. Otherwise omap2+ build fails for MULTI_PLATFORM. Cc: Peter Ujfalusi Cc: Jarkko Nikula Cc: Liam Girdwood Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/Kconfig | 1 - arch/arm/mach-omap1/gpio15xx.c | 2 ++ arch/arm/mach-omap1/gpio16xx.c | 2 ++ arch/arm/mach-omap1/gpio7xx.c | 2 ++ arch/arm/mach-omap1/include/mach/gpio.h | 3 --- arch/arm/mach-omap2/include/mach/gpio.h | 3 --- include/linux/platform_data/gpio-omap.h | 1 - sound/soc/omap/am3517evm.c | 2 -- sound/soc/omap/n810.c | 1 - sound/soc/omap/osk5912.c | 1 - sound/soc/omap/sdp3430.c | 2 -- sound/soc/omap/zoom2.c | 3 --- 12 files changed, 6 insertions(+), 17 deletions(-) delete mode 100644 arch/arm/mach-omap1/include/mach/gpio.h delete mode 100644 arch/arm/mach-omap2/include/mach/gpio.h (limited to 'include/linux') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067efd4845..6207cf734b2b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -937,7 +937,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..02b3eb2e201c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..b9952a258d82 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..f5819b2b7cbe 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f46..000000000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f4..000000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index e8741c2678d5..5d50b25a73d7 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -26,7 +26,6 @@ #include #include -#include #define OMAP1_MPUIO_BASE 0xfffb5000 diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c index fad350682ca2..c1900b2a6f28 100644 --- a/sound/soc/omap/am3517evm.c +++ b/sound/soc/omap/am3517evm.c @@ -25,8 +25,6 @@ #include #include -#include -#include #include #include "omap-mcbsp.h" diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 521bfc3d2b2b..230b8c144848 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index 3960e8df9c76..06ef8d67ed1c 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 597cae769cea..b462a2c9385f 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -31,8 +31,6 @@ #include #include -#include -#include #include #include diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index 677b567935f8..27c501c301b7 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -26,9 +26,6 @@ #include #include -#include -#include -#include #include /* Register descriptions for twl4030 codec part */ -- cgit v1.2.3 From cc95e347cbba3a29c6f8c95ec737624afe489d8e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 19 Sep 2012 15:51:01 -0600 Subject: ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/ We wish to empty arch/arm/mach-tegra/include/mach/ as much as possible to enable single zImage. Move tegra-ahb.h to a more central location (suggested by Arnd, OK'd by Greg KH), and actually make tegra-ahb.c include the header to ensure client and provider agree on the prototype. Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/include/mach/tegra-ahb.h | 19 ------------------- drivers/amba/tegra-ahb.c | 1 + drivers/iommu/tegra-smmu.c | 3 +-- include/linux/tegra-ahb.h | 19 +++++++++++++++++++ 4 files changed, 21 insertions(+), 21 deletions(-) delete mode 100644 arch/arm/mach-tegra/include/mach/tegra-ahb.h create mode 100644 include/linux/tegra-ahb.h (limited to 'include/linux') diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h deleted file mode 100644 index e0f8c84b1d8c..000000000000 --- a/arch/arm/mach-tegra/include/mach/tegra-ahb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __MACH_TEGRA_AHB_H__ -#define __MACH_TEGRA_AHB_H__ - -extern int tegra_ahb_enable_smmu(struct device_node *ahb); - -#endif /* __MACH_TEGRA_AHB_H__ */ diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c index 0b6f0b28a487..bd5de08ad6fd 100644 --- a/drivers/amba/tegra-ahb.c +++ b/drivers/amba/tegra-ahb.c @@ -24,6 +24,7 @@ #include #include #include +#include #define DRV_NAME "tegra-ahb" diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 3fb95dde20f5..41678639b7e3 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -34,12 +34,11 @@ #include #include #include +#include #include #include -#include - enum smmu_hwgrp { HWGRP_AFI, HWGRP_AVPC, diff --git a/include/linux/tegra-ahb.h b/include/linux/tegra-ahb.h new file mode 100644 index 000000000000..f1cd075ceee1 --- /dev/null +++ b/include/linux/tegra-ahb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_AHB_H__ +#define __LINUX_AHB_H__ + +extern int tegra_ahb_enable_smmu(struct device_node *ahb); + +#endif /* __LINUX_AHB_H__ */ -- cgit v1.2.3 From 9aadd70aed60b47e367e7a1a6b9068daba04fe05 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 6 Nov 2012 16:31:32 +0000 Subject: Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints" This reverts commit 3db11feffc1ad2ab9dea27789e6b5b3032827adc (ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints). This commit causes I2C timeouts to appear on several OMAP3430/3530-based boards: http://marc.info/?l=linux-arm-kernel&m=135071372426971&w=2 http://marc.info/?l=linux-arm-kernel&m=135067558415214&w=2 http://marc.info/?l=linux-arm-kernel&m=135216013608196&w=2 and appears to have been sent for merging before one of its prerequisites was merged: http://marc.info/?l=linux-arm-kernel&m=135219411617621&w=2 Signed-off-by: Paul Walmsley Acked-by: Jean Pihet Signed-off-by: Wolfram Sang --- arch/arm/plat-omap/i2c.c | 21 +++++++++++++++++++++ drivers/i2c/busses/i2c-omap.c | 32 ++++++++++++++------------------ include/linux/i2c-omap.h | 1 + 3 files changed, 36 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..6013831a043e 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,12 +26,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include #define OMAP_I2C_SIZE 0x3f @@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index db31eaed6ea5..0b0254312d21 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,7 +43,6 @@ #include #include #include -#include /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -187,8 +186,9 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum MPU wkup latency */ - struct pm_qos_request pm_qos_request; + u32 latency; /* maximum mpu wkup latency */ + void (*set_mpu_wkup_lat)(struct device *dev, + long latency); u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); } /* @@ -629,16 +631,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - */ - if (dev->latency) - pm_qos_add_request(&dev->pm_qos_request, - PM_QOS_CPU_DMA_LATENCY, - dev->latency); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -646,8 +640,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->latency) - pm_qos_remove_request(&dev->pm_qos_request); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, -1); if (r == 0) r = num; @@ -1104,6 +1098,7 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; + dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1159,8 +1154,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index df804ba73e0b..92a0dc75bc74 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -34,6 +34,7 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif -- cgit v1.2.3 From 45aa2c27ada4829bc91bd80455bc67059ac06bc5 Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Tue, 13 Nov 2012 17:26:48 -0600 Subject: clk: Add support for fundamental zynq clks Provide simplified models for the necessary clocks on the zynq-7000 platform. Currently, the PLLs, the CPU clock network, and the basic peripheral clock networks (for SDIO, SMC, SPI, QSPI, UART) are modelled. OF bindings are also provided and documented. Signed-off-by: Josh Cartwright Signed-off-by: Soren Brinkmann Acked-by: Mike Turquette Acked-by: Michal Simek --- .../devicetree/bindings/clock/zynq-7000.txt | 55 +++ drivers/clk/clk-zynq.c | 383 +++++++++++++++++++++ include/linux/clk/zynq.h | 24 ++ 3 files changed, 462 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/zynq-7000.txt create mode 100644 drivers/clk/clk-zynq.c create mode 100644 include/linux/clk/zynq.h (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt new file mode 100644 index 000000000000..23ae1db1bc13 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -0,0 +1,55 @@ +Device Tree Clock bindings for the Zynq 7000 EPP + +The Zynq EPP has several different clk providers, each with there own bindings. +The purpose of this document is to document their usage. + +See clock_bindings.txt for more information on the generic clock bindings. +See Chapter 25 of Zynq TRM for more information about Zynq clocks. + +== PLLs == + +Used to describe the ARM_PLL, DDR_PLL, and IO_PLL. + +Required properties: +- #clock-cells : shall be 0 (only one clock is output from this node) +- compatible : "xlnx,zynq-pll" +- reg : pair of u32 values, which are the address offsets within the SLCR + of the relevant PLL_CTRL register and PLL_CFG register respectively +- clocks : phandle for parent clock. should be the phandle for ps_clk + +Optional properties: +- clock-output-names : name of the output clock + +Example: + armpll: armpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x100 0x110>; + clock-output-names = "armpll"; + }; + +== Peripheral clocks == + +Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks. + +Required properties: +- #clock-cells : shall be 1 +- compatible : "xlnx,zynq-periph-clock" +- reg : a single u32 value, describing the offset within the SLCR where + the CLK_CTRL register is found for this peripheral +- clocks : phandle for parent clocks. should hold phandles for + the IO_PLL, ARM_PLL, and DDR_PLL in order +- clock-output-names : names of the output clock(s). For peripherals that have + two output clocks (for example, the UART), two clocks + should be listed. + +Example: + uart_clk: uart_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-periph-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x154>; + clock-output-names = "uart0_ref_clk", + "uart1_ref_clk"; + }; diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c new file mode 100644 index 000000000000..37a30514fd66 --- /dev/null +++ b/drivers/clk/clk-zynq.c @@ -0,0 +1,383 @@ +/* + * Copyright (c) 2012 National Instruments + * + * Josh Cartwright + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#include +#include +#include +#include +#include + +static void __iomem *slcr_base; + +struct zynq_pll_clk { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_cfg; +}; + +#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) + +#define CTRL_PLL_FDIV(x) ((x) >> 12) + +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); + return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); +} + +static const struct clk_ops zynq_pll_clk_ops = { + .recalc_rate = zynq_pll_recalc_rate, +}; + +static void __init zynq_pll_clk_setup(struct device_node *np) +{ + struct clk_init_data init; + struct zynq_pll_clk *pll; + const char *parent_name; + struct clk *clk; + u32 regs[2]; + int ret; + + ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); + if (WARN_ON(ret)) + return; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (WARN_ON(!pll)) + return; + + pll->pll_ctrl = slcr_base + regs[0]; + pll->pll_cfg = slcr_base + regs[1]; + + of_property_read_string(np, "clock-output-names", &init.name); + + init.ops = &zynq_pll_clk_ops; + parent_name = of_clk_get_parent_name(np, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(ret)) + return; +} + +struct zynq_periph_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *gates[2]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) + +static const u8 periph_clk_parent_map[] = { + 0, 0, 1, 2 +}; +#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) +#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); +} + +static u8 zynq_periph_get_parent(struct clk_hw *hw) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); +} + +static const struct clk_ops zynq_periph_clk_ops = { + .recalc_rate = zynq_periph_recalc_rate, + .get_parent = zynq_periph_get_parent, +}; + +static void __init zynq_periph_clk_setup(struct device_node *np) +{ + struct zynq_periph_clk *periph; + const char *parent_names[3]; + struct clk_init_data init; + int clk_num = 0, err; + const char *name; + struct clk *clk; + u32 reg; + int i; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + periph = kzalloc(sizeof(*periph), GFP_KERNEL); + if (WARN_ON(!periph)) + return; + + periph->clk_ctrl = slcr_base + reg; + spin_lock_init(&periph->clkact_lock); + + init.name = np->name; + init.ops = &zynq_periph_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + periph->hw.init = &init; + + clk = clk_register(NULL, &periph->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + err = of_property_read_string_index(np, "clock-output-names", 0, + &name); + if (WARN_ON(err)) + return; + + periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 0, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[0]))) + return; + clk_num++; + + /* some periph clks have 2 downstream gates */ + err = of_property_read_string_index(np, "clock-output-names", 1, + &name); + if (err != -ENODATA) { + periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 1, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[1]))) + return; + clk_num++; + } + + periph->onecell_data.clks = periph->gates; + periph->onecell_data.clk_num = clk_num; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &periph->onecell_data); + if (WARN_ON(err)) + return; +} + +/* CPU Clock domain is modelled as a mux with 4 children subclks, whose + * derivative rates depend on CLK_621_TRUE + */ + +struct zynq_cpu_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *subclks[4]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) + +static const u8 zynq_cpu_clk_parent_map[] = { + 1, 1, 2, 0 +}; +#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) +#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); +} + +static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); +} + +static const struct clk_ops zynq_cpu_clk_ops = { + .get_parent = zynq_cpu_clk_get_parent, + .recalc_rate = zynq_cpu_clk_recalc_rate, +}; + +struct zynq_cpu_subclk { + struct clk_hw hw; + void __iomem *clk_621; + enum { + CPU_SUBCLK_6X4X, + CPU_SUBCLK_3X2X, + CPU_SUBCLK_2X, + CPU_SUBCLK_1X, + } which; +}; + +#define CLK_621_TRUE(x) ((x) & 1) + +#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); + +static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long uninitialized_var(rate); + struct zynq_cpu_subclk *subclk; + bool is_621; + + subclk = to_zynq_cpu_subclk(hw) + is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); + + switch (subclk->which) { + case CPU_SUBCLK_6X4X: + rate = parent_rate; + break; + case CPU_SUBCLK_3X2X: + rate = parent_rate / 2; + break; + case CPU_SUBCLK_2X: + rate = parent_rate / (is_621 ? 3 : 2); + break; + case CPU_SUBCLK_1X: + rate = parent_rate / (is_621 ? 6 : 4); + break; + }; + + return rate; +} + +static const struct clk_ops zynq_cpu_subclk_ops = { + .recalc_rate = zynq_cpu_subclk_recalc_rate, +}; + +static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, + void __iomem *clk_621) +{ + struct zynq_cpu_subclk *subclk; + struct clk_init_data init; + struct clk *clk; + int err; + + err = of_property_read_string_index(np, "clock-output-names", + which, &init.name); + if (WARN_ON(err)) + goto err_read_output_name; + + subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); + if (!subclk) + goto err_subclk_alloc; + + subclk->clk_621 = clk_621; + subclk->which = which; + + init.ops = &zynq_cpu_subclk_ops; + init.parent_names = &np->name; + init.num_parents = 1; + + subclk->hw.init = &init; + + clk = clk_register(NULL, &subclk->hw); + if (WARN_ON(IS_ERR(clk))) + goto err_clk_register; + + return clk; + +err_clk_register: + kfree(subclk); +err_subclk_alloc: +err_read_output_name: + return ERR_PTR(-EINVAL); +} + +static void __init zynq_cpu_clk_setup(struct device_node *np) +{ + struct zynq_cpu_clk *cpuclk; + const char *parent_names[3]; + struct clk_init_data init; + void __iomem *clk_621; + struct clk *clk; + u32 reg[2]; + int err; + int i; + + err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); + if (WARN_ON(err)) + return; + + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); + if (WARN_ON(!cpuclk)) + return; + + cpuclk->clk_ctrl = slcr_base + reg[0]; + clk_621 = slcr_base + reg[1]; + spin_lock_init(&cpuclk->clkact_lock); + + init.name = np->name; + init.ops = &zynq_cpu_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + cpuclk->hw.init = &init; + + clk = clk_register(NULL, &cpuclk->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + for (i = 0; i < 4; i++) { + cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); + if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) + return; + } + + cpuclk->onecell_data.clks = cpuclk->subclks; + cpuclk->onecell_data.clk_num = i; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &cpuclk->onecell_data); + if (WARN_ON(err)) + return; +} + +static const __initconst struct of_device_id zynq_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, }, + { .compatible = "xlnx,zynq-periph-clock", + .data = zynq_periph_clk_setup, }, + { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, }, + {} +}; + +void __init xilinx_zynq_clocks_init(void __iomem *slcr) +{ + slcr_base = slcr; + of_clk_init(zynq_clk_match); +} diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h new file mode 100644 index 000000000000..56be7cd9aa8b --- /dev/null +++ b/include/linux/clk/zynq.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 National Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_CLK_ZYNQ_H_ +#define __LINUX_CLK_ZYNQ_H_ + +void __init xilinx_zynq_clocks_init(void __iomem *slcr); + +#endif -- cgit v1.2.3 From 40fc3bb56ed125aa22c0a85c816ae0f923519146 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 28 Sep 2012 11:34:49 -0500 Subject: ARM: OMAP: Add platform data header for DMTIMERs Move definition of dmtimer platform data structure in to its own header under . Signed-off-by: Jon Hunter --- arch/arm/mach-omap1/timer.c | 1 + arch/arm/mach-omap2/timer.c | 2 ++ arch/arm/plat-omap/dmtimer.c | 2 ++ arch/arm/plat-omap/include/plat/dmtimer.h | 8 -------- include/linux/platform_data/dmtimer-omap.h | 31 ++++++++++++++++++++++++++++++ 5 files changed, 36 insertions(+), 8 deletions(-) create mode 100644 include/linux/platform_data/dmtimer-omap.h (limited to 'include/linux') diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index cdeb9d3ef640..bde7a35e5000 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -25,6 +25,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 1a662dfdda11..4daa8b41c522 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -39,6 +39,8 @@ #include #include #include +#include +#include #include #include diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index efe47744b491..89585c293554 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index b3cd91b60a2e..a3fbc48c332e 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -124,14 +124,6 @@ struct omap_dm_timer { struct list_head node; }; -struct dmtimer_platform_data { - /* set_timer_src - Only used for OMAP1 devices */ - int (*set_timer_src)(struct platform_device *pdev, int source); - u32 timer_errata; - u32 timer_capability; - int (*get_context_loss_count)(struct device *); -}; - int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h new file mode 100644 index 000000000000..a19b78d826e9 --- /dev/null +++ b/include/linux/platform_data/dmtimer-omap.h @@ -0,0 +1,31 @@ +/* + * DMTIMER platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Jon Hunter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ +#define __PLATFORM_DATA_DMTIMER_OMAP_H__ + +struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ + int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_capability; + u32 timer_errata; + int (*get_context_loss_count)(struct device *); +}; + +#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */ -- cgit v1.2.3 From c4f4925439f13a243aecfb36c693613603c0bfbd Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 20 Nov 2012 23:00:10 -0800 Subject: Input: ads7846 - enable pendown GPIO debounce time setting Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 6 +++++- include/linux/spi/ads7846.h | 5 +++-- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index f02028ec3db6..78e5d9ab0ba7 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -955,7 +955,8 @@ static int ads7846_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume); -static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts) +static int __devinit ads7846_setup_pendown(struct spi_device *spi, + struct ads7846 *ts) { struct ads7846_platform_data *pdata = spi->dev.platform_data; int err; @@ -981,6 +982,9 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 ts->gpio_pendown = pdata->gpio_pendown; + if (pdata->gpio_pendown_debounce) + gpio_set_debounce(pdata->gpio_pendown, + pdata->gpio_pendown_debounce); } else { dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); return -EINVAL; diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index c64de9dd7631..2f694f3846a9 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -46,8 +46,9 @@ struct ads7846_platform_data { u16 debounce_rep; /* additional consecutive good readings * required after the first two */ int gpio_pendown; /* the GPIO used to decide the pendown - * state if get_pendown_state == NULL - */ + * state if get_pendown_state == NULL */ + int gpio_pendown_debounce; /* platform specific debounce time for + * the gpio_pendown */ int (*get_pendown_state)(void); int (*filter_init) (const struct ads7846_platform_data *pdata, void **filter_data); -- cgit v1.2.3 From 0e622d39197f0b64b9e043fe75ac3634bf9f3a05 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Fri, 23 Nov 2012 12:24:09 +0100 Subject: of/address: sparc: Declare of_iomap as an extern function for sparc again This bug-fix makes sure that of_iomap is defined extern for sparc so that the sparc-specific implementation of_iomap is once again used when including include/linux/of_address.h in a sparc context. OF_GPIO that is now available for sparc relies on this. The bug was inadvertently introduced in a850a75, "of/address: add empty static inlines for !CONFIG_OF", that added a static dummy inline for of_iomap when !CONFIG_OF_ADDRESS. However, CONFIG_OF_ADDRESS is never defined for sparc, but there is a sparc-specific implementation /arch/sparc/kernel/of_device_common.c. This fix takes the same approach as 0bce04b that solved the equivalent problem for of_address_to_resource. Signed-off-by: Andreas Larsson Acked-by: David Miller Signed-off-by: Grant Likely --- arch/sparc/include/asm/prom.h | 5 ++++- include/linux/of_address.h | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h index f93003123bce..67c62578d170 100644 --- a/arch/sparc/include/asm/prom.h +++ b/arch/sparc/include/asm/prom.h @@ -63,10 +63,13 @@ extern char *of_console_options; extern void irq_trans_init(struct device_node *dp); extern char *build_path_component(struct device_node *dp); -/* SPARC has a local implementation */ +/* SPARC has local implementations */ extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); #define of_address_to_resource of_address_to_resource +void __iomem *of_iomap(struct device_node *node, int index); +#define of_iomap of_iomap + #endif /* __KERNEL__ */ #endif /* _SPARC_PROM_H */ diff --git a/include/linux/of_address.h b/include/linux/of_address.h index e20e3af68fb6..0506eb53519b 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -42,10 +42,12 @@ static inline struct device_node *of_find_matching_node_by_address( { return NULL; } +#ifndef of_iomap static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } +#endif static inline const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { -- cgit v1.2.3 From 45c3eb7d3a07eb08d1b5b0f5983a996d41610b84 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 30 Nov 2012 08:41:50 -0800 Subject: ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King cc: Kevin Hilman cc: "Benoît Cousson" cc: Herbert Xu cc: "David S. Miller" cc: Vinod Koul cc: Dan Williams cc: Mauro Carvalho Chehab cc: Laurent Pinchart cc: Guennadi Liakhovetski cc: David Woodhouse cc: Kyungmin Park cc: Greg Kroah-Hartman cc: Tomi Valkeinen cc: Florian Tobias Schandinat cc: Hans Verkuil cc: Vaibhav Hiremath cc: Lokesh Vutla cc: Rusty Russell cc: Artem Bityutskiy cc: Afzal Mohammed cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/dma.c | 2 +- arch/arm/mach-omap1/io.c | 2 +- arch/arm/mach-omap1/lcd_dma.c | 2 +- arch/arm/mach-omap1/mcbsp.c | 2 +- arch/arm/mach-omap1/pm.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/dma.c | 2 +- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 3 +- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 3 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/include/plat-omap/dma-omap.h | 377 --------------------- drivers/crypto/omap-aes.c | 2 +- drivers/crypto/omap-sham.c | 2 +- drivers/dma/omap-dma.c | 2 - drivers/media/platform/omap/omap_vout.c | 2 +- drivers/media/platform/omap/omap_vout_vrfb.c | 2 +- drivers/media/platform/omap3isp/ispstat.h | 2 +- drivers/media/platform/soc_camera/omap1_camera.c | 2 +- drivers/mtd/nand/omap2.c | 1 - drivers/mtd/onenand/omap2.c | 2 +- drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/musb/tusb6010_omap.c | 2 +- drivers/video/omap/lcdc.c | 2 +- drivers/video/omap/omapfb_main.c | 2 +- drivers/video/omap/sossi.c | 2 +- include/linux/omap-dma.h | 366 ++++++++++++++++++++ 45 files changed, 408 insertions(+), 422 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat-omap/dma-omap.h (limited to 'include/linux') diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9134b646f01b..dcf364d1a8b1 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index bf213d1d8075..b3fcdedb44ca 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 584b6fab894b..c33dceb46607 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index fbc986bfe69e..2948b0ee4be8 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 60d917a93763..7a05895c0be3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 1ebc7e08d6e5..20ed52ae1714 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 978aed85d328..e190611e4b46 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 5a3b80617a11..499b8accb83d 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 7ed8c1857d56..77924be37d41 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index c6d8fdf92e9c..b0d4723c9a90 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include "soc.h" #include diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 66d663a6ef3a..7a7690ab6cb8 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -52,7 +52,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 6601754f9512..7b201546834d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,7 @@ #include #include "common.h" -#include +#include #include