From 6ecec74520d8a357726e6c12f99080dbe7b347dd Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 26 Sep 2012 12:49:27 -0600 Subject: NVMe: Define SMART log This data structure is defined in the NVMe specification. It's not used by the kernel, but is available for use by userspace software. Signed-off-by: Keith Busch Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index c25cccaa555a..4fa3b0b9b071 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -137,6 +137,34 @@ enum { NVME_LBAF_RP_DEGRADED = 3, }; +struct nvme_smart_log { + __u8 critical_warning; + __u8 temperature[2]; + __u8 avail_spare; + __u8 spare_thresh; + __u8 percent_used; + __u8 rsvd6[26]; + __u8 data_units_read[16]; + __u8 data_units_written[16]; + __u8 host_reads[16]; + __u8 host_writes[16]; + __u8 ctrl_busy_time[16]; + __u8 power_cycles[16]; + __u8 power_on_hours[16]; + __u8 unsafe_shutdowns[16]; + __u8 media_errors[16]; + __u8 num_err_log_entries[16]; + __u8 rsvd192[320]; +}; + +enum { + NVME_SMART_CRIT_SPARE = 1 << 0, + NVME_SMART_CRIT_TEMPERATURE = 1 << 1, + NVME_SMART_CRIT_RELIABILITY = 1 << 2, + NVME_SMART_CRIT_MEDIA = 1 << 3, + NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4, +}; + struct nvme_lba_range_type { __u8 type; __u8 attributes; -- cgit v1.2.3 From 5a4d729139b4e94f670288a3505657311f95c886 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 1 Mar 2013 15:57:00 +0000 Subject: iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_IIO_TRIGGER is defined but CONFIG_IIO_BUFFER is not, the following build error is seen. drivers/iio/common/st_sensors/st_sensors_trigger.c:21:5: error: redefinition of ‘st_sensors_allocate_trigger’ In file included from drivers/iio/common/st_sensors/st_sensors_trigger.c:18:0: include/linux/iio/common/st_sensors.h:239:19: note: previous definition of ‘st_sensors_allocate_trigger’ was here drivers/iio/common/st_sensors/st_sensors_trigger.c:65:6: error: redefinition of ‘st_sensors_deallocate_trigger’ In file included from drivers/iio/common/st_sensors/st_sensors_trigger.c:18:0: include/linux/iio/common/st_sensors.h:244:20: note: previous definition of ‘st_sensors_deallocate_trigger’ was here This occurs because st_sensors_deallocate_trigger is built if CONFIG_IIO_TRIGGER is defined, but the dummy function is compiled if CONFIG_IIO_BUFFER is defined. Signed-off-by: Guenter Roeck Acked-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 1f86a97ab2e2..8bd12be0b02f 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -227,14 +227,17 @@ struct st_sensor_data { }; #ifdef CONFIG_IIO_BUFFER +irqreturn_t st_sensors_trigger_handler(int irq, void *p); + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); +#endif + +#ifdef CONFIG_IIO_TRIGGER int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops); void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); -irqreturn_t st_sensors_trigger_handler(int irq, void *p); - -int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); #else static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) -- cgit v1.2.3 From 43febb27dcdaf9a15e2f362a6d09b0f191c4dcea Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 4 Mar 2013 16:52:38 -0600 Subject: usb: gadget: composite: fix kernel-doc warnings A few trivial fixes for composite driver: Warning(include/linux/usb/composite.h:165): No description found for parameter 'fs_descriptors' Warning(include/linux/usb/composite.h:165): Excess struct/union/enum/typedef member 'descriptors' description in 'usb_function' Warning(include/linux/usb/composite.h:321): No description found for parameter 'gadget_driver' Warning(drivers/usb/gadget/composite.c:1777): Excess function parameter 'bind' description in 'usb_composite_probe' Cc: Greg Kroah-Hartman Cc: Jiri Kosina Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 5 +---- include/linux/usb/composite.h | 3 ++- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 7c821de8ce3d..c0d62b278610 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1757,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = { /** * usb_composite_probe() - register a composite driver * @driver: the driver to register - * @bind: the callback used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. + * * Context: single threaded during gadget setup * * This function is used to register drivers using the composite driver diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 3c671c1b37f6..8860594d6364 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -60,7 +60,7 @@ struct usb_configuration; * @name: For diagnostics, identifies the function. * @strings: tables of strings, keyed by identifiers assigned during bind() * and by language IDs provided in control requests - * @descriptors: Table of full (or low) speed descriptors, using interface and + * @fs_descriptors: Table of full (or low) speed descriptors, using interface and * string identifiers assigned during @bind(). If this pointer is null, * the function will not be available at full speed (or at low speed). * @hs_descriptors: Table of high speed descriptors, using interface and @@ -290,6 +290,7 @@ enum { * after function notifications * @resume: Notifies configuration when the host restarts USB traffic, * before function notifications + * @gadget_driver: Gadget driver controlling this driver * * Devices default to reporting self powered operation. Devices which rely * on bus powered operation should report this in their @bind method. -- cgit v1.2.3 From df545d1cd01aab3ba3f687d5423e6c3687b069d8 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 1 Mar 2013 20:13:46 +0530 Subject: mfd: palmas: Provide irq flags through DT/platform data Currently driver sets the irq type to IRQF_TRIGGER_LOW which is causing interrupt registration failure in ARM based SoCs as: [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0) [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 Provide the irq flags through platform data if device is registered through board file or get the irq type from DT node property in place of hardcoding the irq flag in driver to support multiple platforms. Also configure the device to generate the interrupt signal according to flag type. Signed-off-by: Laxman Dewangan Signed-off-by: Samuel Ortiz --- drivers/mfd/palmas.c | 36 +++++++++++++++++++++++++++++++++--- include/linux/mfd/palmas.h | 1 + 2 files changed, 34 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index bbdbc50a3cca..73bf76df1044 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -257,9 +257,24 @@ static struct regmap_irq_chip palmas_irq_chip = { PALMAS_INT1_MASK), }; -static void palmas_dt_to_pdata(struct device_node *node, +static int palmas_set_pdata_irq_flag(struct i2c_client *i2c, struct palmas_platform_data *pdata) { + struct irq_data *irq_data = irq_get_irq_data(i2c->irq); + if (!irq_data) { + dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq); + return -EINVAL; + } + + pdata->irq_flags = irqd_get_trigger_type(irq_data); + dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags); + return 0; +} + +static void palmas_dt_to_pdata(struct i2c_client *i2c, + struct palmas_platform_data *pdata) +{ + struct device_node *node = i2c->dev.of_node; int ret; u32 prop; @@ -283,6 +298,8 @@ static void palmas_dt_to_pdata(struct device_node *node, pdata->power_ctrl = PALMAS_POWER_CTRL_NSLEEP_MASK | PALMAS_POWER_CTRL_ENABLE1_MASK | PALMAS_POWER_CTRL_ENABLE2_MASK; + if (i2c->irq) + palmas_set_pdata_irq_flag(i2c, pdata); } static int palmas_i2c_probe(struct i2c_client *i2c, @@ -304,7 +321,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c, if (!pdata) return -ENOMEM; - palmas_dt_to_pdata(node, pdata); + palmas_dt_to_pdata(i2c, pdata); } if (!pdata) @@ -344,6 +361,19 @@ static int palmas_i2c_probe(struct i2c_client *i2c, } } + /* Change interrupt line output polarity */ + if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH) + reg = PALMAS_POLARITY_CTRL_INT_POLARITY; + else + reg = 0; + ret = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE, + PALMAS_POLARITY_CTRL, PALMAS_POLARITY_CTRL_INT_POLARITY, + reg); + if (ret < 0) { + dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret); + goto err; + } + /* Change IRQ into clear on read mode for efficiency */ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE); addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL); @@ -352,7 +382,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c, regmap_write(palmas->regmap[slave], addr, reg); ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, 0, &palmas_irq_chip, + IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip, &palmas->irq_data); if (ret < 0) goto err; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index a4d13d7cd001..3bbda22721ea 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -221,6 +221,7 @@ struct palmas_clk_platform_data { }; struct palmas_platform_data { + int irq_flags; int gpio_base; /* bit value to be loaded to the POWER_CTRL register */ -- cgit v1.2.3 From 80e4e6716e43500c5c7d4ff4f73fc1b56f024083 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 2 Mar 2013 15:25:50 +0800 Subject: mfd: tps65912: Declare and use tps65912_irq_exit() Clean up interrupts on exit, silencing a sparse warning caused by tps65912_irq_exit() being defined but not prototyped as we go. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65912-core.c | 1 + include/linux/mfd/tps65912.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 4658b5bdcd84..aeb8e40ab424 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -169,6 +169,7 @@ err: void tps65912_device_exit(struct tps65912 *tps65912) { mfd_remove_devices(tps65912->dev); + tps65912_irq_exit(tps65912); kfree(tps65912); } diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h index aaceab402ec5..6d309032dc0d 100644 --- a/include/linux/mfd/tps65912.h +++ b/include/linux/mfd/tps65912.h @@ -323,5 +323,6 @@ int tps65912_device_init(struct tps65912 *tps65912); void tps65912_device_exit(struct tps65912 *tps65912); int tps65912_irq_init(struct tps65912 *tps65912, int irq, struct tps65912_platform_data *pdata); +int tps65912_irq_exit(struct tps65912 *tps65912); #endif /* __LINUX_MFD_TPS65912_H */ -- cgit v1.2.3 From fd860195a4f9d661754345bd06a3adb30d12d882 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 8 Mar 2013 10:47:21 +0800 Subject: mfd: wm831x: Don't forward declare enum wm831x_auxadc We can't forward declare enums. Signed-off-by: Andrew Morton Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/auxadc.h | 2 ++ include/linux/mfd/wm831x/core.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h index b132067e9e99..867aa23f9370 100644 --- a/include/linux/mfd/wm831x/auxadc.h +++ b/include/linux/mfd/wm831x/auxadc.h @@ -15,6 +15,8 @@ #ifndef __MFD_WM831X_AUXADC_H__ #define __MFD_WM831X_AUXADC_H__ +struct wm831x; + /* * R16429 (0x402D) - AuxADC Data */ diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 4a3b83a77614..76c22648436f 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -20,6 +20,7 @@ #include #include #include +#include /* * Register values. @@ -355,7 +356,6 @@ enum wm831x_parent { }; struct wm831x; -enum wm831x_auxadc; typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x, enum wm831x_auxadc input); -- cgit v1.2.3 From 5857f70c8a62377c2304d8ad27e579881728fc5a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 4 Mar 2013 14:32:54 -0800 Subject: idr: fix new kernel-doc warnings Fix new kernel-doc warnings in idr: Warning(include/linux/idr.h:113): No description found for parameter 'idr' Warning(include/linux/idr.h:113): Excess function parameter 'idp' description in 'idr_find' Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc' Warning(lib/idr.c:232): Excess function parameter 'id' description in 'sub_alloc' Signed-off-by: Randy Dunlap Acked-by: Tejun Heo Signed-off-by: Linus Torvalds --- include/linux/idr.h | 2 +- lib/idr.c | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/idr.h b/include/linux/idr.h index a6f38b5c34e4..8c1f81f823c8 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -99,7 +99,7 @@ static inline void idr_preload_end(void) /** * idr_find - return pointer for given id - * @idp: idr handle + * @idr: idr handle * @id: lookup key * * Return the pointer given the id it has been registered with. A %NULL diff --git a/lib/idr.c b/lib/idr.c index 00739aaf95a2..4f82a284c6a2 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -214,7 +214,6 @@ EXPORT_SYMBOL(idr_pre_get); * sub_alloc - try to allocate an id without growing the tree depth * @idp: idr handle * @starting_id: id to start search at - * @id: pointer to the allocated handle * @pa: idr_layer[MAX_IDR_LEVEL] used as backtrack buffer * @gfp_mask: allocation mask for idr_layer_alloc() * @layer_idr: optional idr passed to idr_layer_alloc() -- cgit v1.2.3 From ebf47beb660e5580df7bee06d5cf9d37c0f22fac Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 13 Mar 2013 14:59:30 -0700 Subject: include/linux/res_counter.h needs errno.h alpha allmodconfig: In file included from mm/memcontrol.c:28: include/linux/res_counter.h: In function 'res_counter_set_limit': include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function) include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once include/linux/res_counter.h:203: error: for each function it appears in.) Cc: Kamezawa Hiroyuki Cc: Glauber Costa Cc: Tejun Heo Cc: Frederic Weisbecker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 5ae8456d9670..c23099413ad6 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -14,6 +14,7 @@ */ #include +#include /* * The core object. the cgroup that wishes to account for some -- cgit v1.2.3 From c8615d3716fe327c2540cf514a34b227dc9b39e8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 13 Mar 2013 14:59:42 -0700 Subject: idr: deprecate idr_pre_get() and idr_get_new[_above]() Now that all in-kernel users are converted to ues the new alloc interface, mark the old interface deprecated. We should be able to remove these in a few releases. Signed-off-by: Tejun Heo Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/idr.h | 66 ++++++++++++++++++++++++++++++++++++++++------------- lib/idr.c | 41 ++++----------------------------- 2 files changed, 55 insertions(+), 52 deletions(-) (limited to 'include/linux') diff --git a/include/linux/idr.h b/include/linux/idr.h index 8c1f81f823c8..2640c7e99e51 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -73,8 +73,6 @@ struct idr { */ void *idr_find_slowpath(struct idr *idp, int id); -int idr_pre_get(struct idr *idp, gfp_t gfp_mask); -int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id); void idr_preload(gfp_t gfp_mask); int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask); int idr_for_each(struct idr *idp, @@ -119,19 +117,6 @@ static inline void *idr_find(struct idr *idr, int id) return idr_find_slowpath(idr, id); } -/** - * idr_get_new - allocate new idr entry - * @idp: idr handle - * @ptr: pointer you want associated with the id - * @id: pointer to the allocated handle - * - * Simple wrapper around idr_get_new_above() w/ @starting_id of zero. - */ -static inline int idr_get_new(struct idr *idp, void *ptr, int *id) -{ - return idr_get_new_above(idp, ptr, 0, id); -} - /** * idr_for_each_entry - iterate over an idr's elements of a given type * @idp: idr handle @@ -143,7 +128,56 @@ static inline int idr_get_new(struct idr *idp, void *ptr, int *id) entry != NULL; \ ++id, entry = (typeof(entry))idr_get_next((idp), &(id))) -void __idr_remove_all(struct idr *idp); /* don't use */ +/* + * Don't use the following functions. These exist only to suppress + * deprecated warnings on EXPORT_SYMBOL()s. + */ +int __idr_pre_get(struct idr *idp, gfp_t gfp_mask); +int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id); +void __idr_remove_all(struct idr *idp); + +/** + * idr_pre_get - reserve resources for idr allocation + * @idp: idr handle + * @gfp_mask: memory allocation flags + * + * Part of old alloc interface. This is going away. Use + * idr_preload[_end]() and idr_alloc() instead. + */ +static inline int __deprecated idr_pre_get(struct idr *idp, gfp_t gfp_mask) +{ + return __idr_pre_get(idp, gfp_mask); +} + +/** + * idr_get_new_above - allocate new idr entry above or equal to a start id + * @idp: idr handle + * @ptr: pointer you want associated with the id + * @starting_id: id to start search at + * @id: pointer to the allocated handle + * + * Part of old alloc interface. This is going away. Use + * idr_preload[_end]() and idr_alloc() instead. + */ +static inline int __deprecated idr_get_new_above(struct idr *idp, void *ptr, + int starting_id, int *id) +{ + return __idr_get_new_above(idp, ptr, starting_id, id); +} + +/** + * idr_get_new - allocate new idr entry + * @idp: idr handle + * @ptr: pointer you want associated with the id + * @id: pointer to the allocated handle + * + * Part of old alloc interface. This is going away. Use + * idr_preload[_end]() and idr_alloc() instead. + */ +static inline int __deprecated idr_get_new(struct idr *idp, void *ptr, int *id) +{ + return __idr_get_new_above(idp, ptr, 0, id); +} /** * idr_remove_all - remove all ids from the given idr tree diff --git a/lib/idr.c b/lib/idr.c index 4f82a284c6a2..c6fb8295507b 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -184,20 +184,7 @@ static void idr_mark_full(struct idr_layer **pa, int id) } } -/** - * idr_pre_get - reserve resources for idr allocation - * @idp: idr handle - * @gfp_mask: memory allocation flags - * - * This function should be called prior to calling the idr_get_new* functions. - * It preallocates enough memory to satisfy the worst possible allocation. The - * caller should pass in GFP_KERNEL if possible. This of course requires that - * no spinning locks be held. - * - * If the system is REALLY out of memory this function returns %0, - * otherwise %1. - */ -int idr_pre_get(struct idr *idp, gfp_t gfp_mask) +int __idr_pre_get(struct idr *idp, gfp_t gfp_mask) { while (idp->id_free_cnt < MAX_IDR_FREE) { struct idr_layer *new; @@ -208,7 +195,7 @@ int idr_pre_get(struct idr *idp, gfp_t gfp_mask) } return 1; } -EXPORT_SYMBOL(idr_pre_get); +EXPORT_SYMBOL(__idr_pre_get); /** * sub_alloc - try to allocate an id without growing the tree depth @@ -375,25 +362,7 @@ static void idr_fill_slot(struct idr *idr, void *ptr, int id, idr_mark_full(pa, id); } -/** - * idr_get_new_above - allocate new idr entry above or equal to a start id - * @idp: idr handle - * @ptr: pointer you want associated with the id - * @starting_id: id to start search at - * @id: pointer to the allocated handle - * - * This is the allocate id function. It should be called with any - * required locks. - * - * If allocation from IDR's private freelist fails, idr_get_new_above() will - * return %-EAGAIN. The caller should retry the idr_pre_get() call to refill - * IDR's preallocation and then retry the idr_get_new_above() call. - * - * If the idr is full idr_get_new_above() will return %-ENOSPC. - * - * @id returns a value in the range @starting_id ... %0x7fffffff - */ -int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id) +int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id) { struct idr_layer *pa[MAX_IDR_LEVEL + 1]; int rv; @@ -406,7 +375,7 @@ int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id) *id = rv; return 0; } -EXPORT_SYMBOL(idr_get_new_above); +EXPORT_SYMBOL(__idr_get_new_above); /** * idr_preload - preload for idr_alloc() @@ -907,7 +876,7 @@ static void free_bitmap(struct ida *ida, struct ida_bitmap *bitmap) int ida_pre_get(struct ida *ida, gfp_t gfp_mask) { /* allocate idr_layers */ - if (!idr_pre_get(&ida->idr, gfp_mask)) + if (!__idr_pre_get(&ida->idr, gfp_mask)) return 0; /* allocate free_bitmap */ -- cgit v1.2.3 From 5bc7c33ca93a285dcfe7b7fd64970f6314440ad1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 13 Mar 2013 09:51:31 -0700 Subject: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e ("mtd: nand: kill NAND_NO_READRDY"). In that patch I overlooked a few things. The original documentation for NAND_NO_READRDY included "True for all large page devices, as they do not support autoincrement." I was conflating "not support autoincrement" with the NAND_NO_AUTOINCR option, which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I concluded that I then could harmlessly drop NAND_NO_READRDY. But of course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean NAND_NO_READRDY was doing nothing... So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied only to those few remaining small-page NAND which needed it in the first place. Cc: stable@kernel.org [3.5+] Reported-by: Alexander Shiyan Tested-by: Alexander Shiyan Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 16 +++++++++ drivers/mtd/nand/nand_ids.c | 80 +++++++++++++++++++++++--------------------- include/linux/mtd/nand.h | 7 ++++ 3 files changed, 64 insertions(+), 39 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 43214151b882..42c63927609d 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1523,6 +1523,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, oobreadlen -= toread; } } + + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); + } } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; @@ -1787,6 +1795,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); + } + readlen -= len; if (!readlen) break; diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index e3aa2748a6e7..9c612388e5de 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -22,49 +22,51 @@ * 512 512 Byte page size */ struct nand_flash_dev nand_flash_ids[] = { +#define SP_OPTIONS NAND_NEED_READRDY +#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16) #ifdef CONFIG_MTD_NAND_MUSEUM_IDS - {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, - {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, - {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, - {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, - - {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, - {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, - {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS}, + {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS}, + {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS}, + + {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS}, + {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16}, + {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16}, #endif - {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, - {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, - {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, - {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, - {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, - {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, - {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, - {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, + {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS}, + {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS}, + {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16}, + {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16}, + + {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS}, + {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS}, + {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16}, + {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16}, + + {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS}, + {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS}, + {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16}, + {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16}, + + {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS}, + {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16}, + {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16}, + + {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS}, /* * These are the new chips with large page size. The pagesize and the diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7ccb3c59ed60..ef52d9c91459 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -187,6 +187,13 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 +/* + * Chip requires ready check on read (for auto-incremented sequential read). + * True only for small page devices; large page devices do not support + * autoincrement. + */ +#define NAND_NEED_READRDY 0x00000100 + /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 -- cgit v1.2.3 From 16fad69cfe4adbbfa813de516757b87bcae36d93 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 14 Mar 2013 05:40:32 +0000 Subject: tcp: fix skb_availroom() Chrome OS team reported a crash on a Pixel ChromeBook in TCP stack : https://code.google.com/p/chromium/issues/detail?id=182056 commit a21d45726acac (tcp: avoid order-1 allocations on wifi and tx path) did a poor choice adding an 'avail_size' field to skb, while what we really needed was a 'reserved_tailroom' one. It would have avoided commit 22b4a4f22da (tcp: fix retransmit of partially acked frames) and this commit. Crash occurs because skb_split() is not aware of the 'avail_size' management (and should not be aware) Signed-off-by: Eric Dumazet Reported-by: Mukesh Agrawal Signed-off-by: David S. Miller --- include/linux/skbuff.h | 7 +++++-- net/ipv4/tcp.c | 2 +- net/ipv4/tcp_output.c | 1 - 3 files changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 821c7f45d2a7..6f2bb860e051 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -500,7 +500,7 @@ struct sk_buff { union { __u32 mark; __u32 dropcount; - __u32 avail_size; + __u32 reserved_tailroom; }; sk_buff_data_t inner_transport_header; @@ -1447,7 +1447,10 @@ static inline int skb_tailroom(const struct sk_buff *skb) */ static inline int skb_availroom(const struct sk_buff *skb) { - return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len; + if (skb_is_nonlinear(skb)) + return 0; + + return skb->end - skb->tail - skb->reserved_tailroom; } /** diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 47e854fcae24..e22020790709 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -775,7 +775,7 @@ struct sk_buff *sk_stream_alloc_skb(struct sock *sk, int size, gfp_t gfp) * Make sure that we have exactly size bytes * available to the caller, no more, no less. */ - skb->avail_size = size; + skb->reserved_tailroom = skb->end - skb->tail - size; return skb; } __kfree_skb(skb); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index e2b4461074da..817fbb396bc8 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1298,7 +1298,6 @@ static void __pskb_trim_head(struct sk_buff *skb, int len) eat = min_t(int, len, skb_headlen(skb)); if (eat) { __skb_pull(skb, eat); - skb->avail_size -= eat; len -= eat; if (!len) return; -- cgit v1.2.3 From cca7af3889bfa343d33d5e657a38d876abd10e58 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 14 Mar 2013 03:29:40 +0000 Subject: skb: Propagate pfmemalloc on skb from head page only Hi. I'm trying to send big chunks of memory from application address space via TCP socket using vmsplice + splice like this mem = mmap(128Mb); vmsplice(pipe[1], mem); /* splice memory into pipe */ splice(pipe[0], tcp_socket); /* send it into network */ When I'm lucky and a huge page splices into the pipe and then into the socket _and_ client and server ends of the TCP connection are on the same host, communicating via lo, the whole connection gets stuck! The sending queue becomes full and app stops writing/splicing more into it, but the receiving queue remains empty, and that's why. The __skb_fill_page_desc observes a tail page of a huge page and erroneously propagates its page->pfmemalloc value onto socket (the pfmemalloc on tail pages contain garbage). Then this skb->pfmemalloc leaks through lo and due to the tcp_v4_rcv sk_filter if (skb->pfmemalloc && !sock_flag(sk, SOCK_MEMALLOC)) /* true */ return -ENOMEM goto release_and_discard; no packets reach the socket. Even TCP re-transmits are dropped by this, as skb cloning clones the pfmemalloc flag as well. That said, here's the proper page->pfmemalloc propagation onto socket: we must check the huge-page's head page only, other pages' pfmemalloc and mapping values do not contain what is expected in this place. However, I'm not sure whether this fix is _complete_, since pfmemalloc propagation via lo also oesn't look great. Both, bit propagation from page to skb and this check in sk_filter, were introduced by c48a11c7 (netvm: propagate page->pfmemalloc to skb), in v3.5 so Mel and stable@ are in Cc. Signed-off-by: Pavel Emelyanov Acked-by: Eric Dumazet Acked-by: Mel Gorman Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6f2bb860e051..441f5bfdab8e 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1288,11 +1288,13 @@ static inline void __skb_fill_page_desc(struct sk_buff *skb, int i, * do not lose pfmemalloc information as the pages would not be * allocated using __GFP_MEMALLOC. */ - if (page->pfmemalloc && !page->mapping) - skb->pfmemalloc = true; frag->page.p = page; frag->page_offset = off; skb_frag_size_set(frag, size); + + page = compound_head(page); + if (page->pfmemalloc && !page->mapping) + skb->pfmemalloc = true; } /** -- cgit v1.2.3 From f65846a1800ef8c48d1ae1973c30dae4c356a800 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 9 Mar 2013 07:38:41 -0800 Subject: list: Fix double fetch of pointer in hlist_entry_safe() The current version of hlist_entry_safe() fetches the pointer twice, once to test for NULL and the other to compute the offset back to the enclosing structure. This is OK for normal lock-based use because in that case, the pointer cannot change. However, when the pointer is protected by RCU (as in "rcu_dereference(p)"), then the pointer can change at any time. This use case can result in the following sequence of events: 1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected pointer as sees that it is non-NULL. 2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0 just fetched a pointer to. Because this is the last entry in the list, the pointer fetched by CPU 0 is now NULL. 3. CPU 0 refetches the pointer, obtains NULL, and then gets a NULL-pointer crash. This commit therefore applies gcc's "({ })" statement expression to create a temporary variable so that the specified pointer is fetched only once, avoiding the above sequence of events. Please note that it is the caller's responsibility to use rcu_dereference() as needed. This allows RCU-protected uses to work correctly without imposing any additional overhead on the non-RCU case. Many thanks to Eric Dumazet for spotting root cause! Reported-by: CAI Qian Reported-by: Eric Dumazet Signed-off-by: Paul E. McKenney Tested-by: Li Zefan --- include/linux/list.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/list.h b/include/linux/list.h index d991cc147c98..6a1f8df9144b 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -667,7 +667,9 @@ static inline void hlist_move_list(struct hlist_head *old, pos = n) #define hlist_entry_safe(ptr, type, member) \ - (ptr) ? hlist_entry(ptr, type, member) : NULL + ({ typeof(ptr) ____ptr = (ptr); \ + ____ptr ? hlist_entry(____ptr, type, member) : NULL; \ + }) /** * hlist_for_each_entry - iterate over list of given type -- cgit v1.2.3 From 1d9d8639c063caf6efc2447f5f26aa637f844ff6 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 15 Mar 2013 14:26:07 +0100 Subject: perf,x86: fix kernel crash with PEBS/BTS after suspend/resume This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: Linus Torvalds Signed-off-by: Stephane Eranian Signed-off-by: Linus Torvalds --- arch/x86/kernel/cpu/perf_event_intel_ds.c | 8 ++++++++ arch/x86/power/cpu.c | 2 ++ include/linux/perf_event.h | 2 ++ 3 files changed, 12 insertions(+) (limited to 'include/linux') diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 826054a4f2ee..0e9bdd3cb01e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -729,3 +729,11 @@ void intel_ds_init(void) } } } + +void perf_restore_debug_store(void) +{ + if (!x86_pmu.bts && !x86_pmu.pebs) + return; + + init_debug_store_on_cpu(smp_processor_id()); +} diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 120cee1c3f8d..3c68768d7a75 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -228,6 +229,7 @@ static void __restore_processor_state(struct saved_context *ctxt) do_fpu_end(); x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); + perf_restore_debug_store(); } /* Needed by apm.c */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index e47ee462c2f2..71caed8626be 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -758,6 +758,7 @@ extern void perf_event_enable(struct perf_event *event); extern void perf_event_disable(struct perf_event *event); extern int __perf_event_disable(void *info); extern void perf_event_task_tick(void); +extern void perf_restore_debug_store(void); #else static inline void perf_event_task_sched_in(struct task_struct *prev, @@ -797,6 +798,7 @@ static inline void perf_event_enable(struct perf_event *event) { } static inline void perf_event_disable(struct perf_event *event) { } static inline int __perf_event_disable(void *info) { return -1; } static inline void perf_event_task_tick(void) { } +static inline void perf_restore_debug_store(void) { } #endif #define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x)) -- cgit v1.2.3 From 1eef1282549d7accdd33ee36d409b039b1f911fb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 11 Mar 2013 09:07:46 -0300 Subject: amd64_edac: Correct DIMM sizes We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC: Fix csrow size reported in sysfs") tried to address the issue. It fixed the report with the old API but not with the new one. Correct it for the new API too. Signed-off-by: Mauro Carvalho Chehab [ make it a per-csrow accounting regardless of ->channel_count ] Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 14 +++++++++----- drivers/edac/edac_mc_sysfs.c | 13 +++---------- include/linux/edac.h | 1 - 3 files changed, 12 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 910b0116c128..532de775a184 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2048,12 +2048,18 @@ static int init_csrows(struct mem_ctl_info *mci) edac_dbg(1, "MC node: %d, csrow: %d\n", pvt->mc_node_id, i); - if (row_dct0) + if (row_dct0) { nr_pages = amd64_csrow_nr_pages(pvt, 0, i); + csrow->channels[0]->dimm->nr_pages = nr_pages; + } /* K8 has only one DCT */ - if (boot_cpu_data.x86 != 0xf && row_dct1) - nr_pages += amd64_csrow_nr_pages(pvt, 1, i); + if (boot_cpu_data.x86 != 0xf && row_dct1) { + int row_dct1_pages = amd64_csrow_nr_pages(pvt, 1, i); + + csrow->channels[1]->dimm->nr_pages = row_dct1_pages; + nr_pages += row_dct1_pages; + } mtype = amd64_determine_memory_type(pvt, i); @@ -2072,9 +2078,7 @@ static int init_csrows(struct mem_ctl_info *mci) dimm = csrow->channels[j]->dimm; dimm->mtype = mtype; dimm->edac_mode = edac_mode; - dimm->nr_pages = nr_pages; } - csrow->nr_pages = nr_pages; } return empty; diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 0cbf670efa23..4c50a4760db7 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -180,9 +180,6 @@ static ssize_t csrow_size_show(struct device *dev, int i; u32 nr_pages = 0; - if (csrow->mci->csbased) - return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages)); - for (i = 0; i < csrow->nr_channels; i++) nr_pages += csrow->channels[i]->dimm->nr_pages; return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages)); @@ -778,14 +775,10 @@ static ssize_t mci_size_mb_show(struct device *dev, for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) { struct csrow_info *csrow = mci->csrows[csrow_idx]; - if (csrow->mci->csbased) { - total_pages += csrow->nr_pages; - } else { - for (j = 0; j < csrow->nr_channels; j++) { - struct dimm_info *dimm = csrow->channels[j]->dimm; + for (j = 0; j < csrow->nr_channels; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; - total_pages += dimm->nr_pages; - } + total_pages += dimm->nr_pages; } } diff --git a/include/linux/edac.h b/include/linux/edac.h index 4fd4999ccb5b..ab1ea98e767c 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -561,7 +561,6 @@ struct csrow_info { u32 ue_count; /* Uncorrectable Errors for this csrow */ u32 ce_count; /* Correctable Errors for this csrow */ - u32 nr_pages; /* combined pages count of all channels */ struct mem_ctl_info *mci; /* the parent */ -- cgit v1.2.3 From 9713faecff3d071de1208b081d4943b002e9cb1c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 11 Mar 2013 09:28:48 -0300 Subject: EDAC: Merge mci.mem_is_per_rank with mci.csbased Both mci.mem_is_per_rank and mci.csbased denote the same thing: the memory controller is csrows based. Merge both fields into one. There's no need for the driver to actually fill it, as the core detects it by checking if one of the layers has the csrows type as part of the memory hierarchy: if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) per_rank = true; Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 1 - drivers/edac/edac_mc.c | 6 +++--- drivers/edac/edac_mc_sysfs.c | 2 +- include/linux/edac.h | 6 ++---- 4 files changed, 6 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 532de775a184..e1d13c463c90 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2423,7 +2423,6 @@ static int amd64_init_one_instance(struct pci_dev *F2) mci->pvt_info = pvt; mci->pdev = &pvt->F2->dev; - mci->csbased = 1; setup_mci_misc_attrs(mci, fam_type); diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index cdb81aa73ab7..27e86d938262 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -86,7 +86,7 @@ static void edac_mc_dump_dimm(struct dimm_info *dimm, int number) edac_dimm_info_location(dimm, location, sizeof(location)); edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n", - dimm->mci->mem_is_per_rank ? "rank" : "dimm", + dimm->mci->csbased ? "rank" : "dimm", number, location, dimm->csrow, dimm->cschannel); edac_dbg(4, " dimm = %p\n", dimm); edac_dbg(4, " dimm->label = '%s'\n", dimm->label); @@ -341,7 +341,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, memcpy(mci->layers, layers, sizeof(*layer) * n_layers); mci->nr_csrows = tot_csrows; mci->num_cschannel = tot_channels; - mci->mem_is_per_rank = per_rank; + mci->csbased = per_rank; /* * Alocate and fill the csrow/channels structs @@ -1235,7 +1235,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, * incrementing the compat API counters */ edac_dbg(4, "%s csrows map: (%d,%d)\n", - mci->mem_is_per_rank ? "rank" : "dimm", + mci->csbased ? "rank" : "dimm", dimm->csrow, dimm->cschannel); if (row == -1) row = dimm->csrow; diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 4c50a4760db7..5899a76eec3b 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -609,7 +609,7 @@ static int edac_create_dimm_object(struct mem_ctl_info *mci, device_initialize(&dimm->dev); dimm->dev.parent = &mci->dev; - if (mci->mem_is_per_rank) + if (mci->csbased) dev_set_name(&dimm->dev, "rank%d", index); else dev_set_name(&dimm->dev, "dimm%d", index); diff --git a/include/linux/edac.h b/include/linux/edac.h index ab1ea98e767c..0b763276f619 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -675,11 +675,11 @@ struct mem_ctl_info { * sees memory sticks ("dimms"), and the ones that sees memory ranks. * All old memory controllers enumerate memories per rank, but most * of the recent drivers enumerate memories per DIMM, instead. - * When the memory controller is per rank, mem_is_per_rank is true. + * When the memory controller is per rank, csbased is true. */ unsigned n_layers; struct edac_mc_layer *layers; - bool mem_is_per_rank; + bool csbased; /* * DIMM info. Will eventually remove the entire csrows_info some day @@ -740,8 +740,6 @@ struct mem_ctl_info { u32 fake_inject_ue; u16 fake_inject_count; #endif - __u8 csbased : 1, /* csrow-based memory controller */ - __resv : 7; }; #endif -- cgit v1.2.3 From 1e8bbe6cd02fc300c88bd48244ce61ad9c7d1776 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 14 Mar 2013 01:05:13 +0000 Subject: net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") introduced a new policy, preferring MBIM for dual NCM/MBIM functions if the cdc_mbim driver was enabled. This caused a regression for users wanting to use NCM. Devices implementing NCM backwards compatibility according to section 3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single USB function, using different altsettings. The cdc_ncm and cdc_mbim drivers will both probe such functions, and must agree on a common policy for selecting either MBIM or NCM. Until now, this policy has been set at build time based on CONFIG_USB_NET_CDC_MBIM. Use a module parameter to set the system policy at runtime, allowing the user to prefer NCM on systems with the cdc_mbim driver. Cc: Greg Suarez Cc: Alexey Orishko Reported-by: Geir Haatveit Reported-by: Tommi Kyntola Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_mbim.c | 11 +--------- drivers/net/usb/cdc_ncm.c | 49 +++++++++++++++++++++++++++++---------------- include/linux/usb/cdc_ncm.h | 1 + 3 files changed, 34 insertions(+), 27 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 248d2dc765a5..16c842997291 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -68,18 +68,9 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf) struct cdc_ncm_ctx *ctx; struct usb_driver *subdriver = ERR_PTR(-ENODEV); int ret = -ENODEV; - u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM; + u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf); struct cdc_mbim_state *info = (void *)&dev->data; - /* see if interface supports MBIM alternate setting */ - if (intf->num_altsetting == 2) { - if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) - usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM); - data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM; - } - /* Probably NCM, defer for cdc_ncm_bind */ if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) goto err; diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 61b74a2b89ac..4709fa3497cf 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -55,6 +55,14 @@ #define DRIVER_VERSION "14-Mar-2012" +#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM) +static bool prefer_mbim = true; +#else +static bool prefer_mbim; +#endif +module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions"); + static void cdc_ncm_txpath_bh(unsigned long param); static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx); static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer); @@ -550,9 +558,12 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) } EXPORT_SYMBOL_GPL(cdc_ncm_unbind); -static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) +/* Select the MBIM altsetting iff it is preferred and available, + * returning the number of the corresponding data interface altsetting + */ +u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf) { - int ret; + struct usb_host_interface *alt; /* The MBIM spec defines a NCM compatible default altsetting, * which we may have matched: @@ -568,23 +579,27 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) * endpoint descriptors, shall be constructed according to * the rules given in section 6 (USB Device Model) of this * specification." - * - * Do not bind to such interfaces, allowing cdc_mbim to handle - * them */ -#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM) - if ((intf->num_altsetting == 2) && - !usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_MBIM)) { - if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) - return -ENODEV; - else - usb_set_interface(dev->udev, - intf->cur_altsetting->desc.bInterfaceNumber, - CDC_NCM_COMM_ALTSETTING_NCM); + if (prefer_mbim && intf->num_altsetting == 2) { + alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM); + if (alt && cdc_ncm_comm_intf_is_mbim(alt) && + !usb_set_interface(dev->udev, + intf->cur_altsetting->desc.bInterfaceNumber, + CDC_NCM_COMM_ALTSETTING_MBIM)) + return CDC_NCM_DATA_ALTSETTING_MBIM; } -#endif + return CDC_NCM_DATA_ALTSETTING_NCM; +} +EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting); + +static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + + /* MBIM backwards compatible function? */ + cdc_ncm_select_altsetting(dev, intf); + if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) + return -ENODEV; /* NCM data altsetting is always 1 */ ret = cdc_ncm_bind_common(dev, intf, 1); diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 3b8f9d4fc3fe..cc25b70af33c 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -127,6 +127,7 @@ struct cdc_ncm_ctx { u16 connected; }; +extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf); extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign); -- cgit v1.2.3 From 6c4d3bc99b3341067775efd4d9d13cc8e655fd7c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Sun, 17 Mar 2013 15:49:10 -0700 Subject: perf,x86: fix link failure for non-Intel configs Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- include/linux/perf_event.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 71caed8626be..1d795df6f4cf 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -758,7 +758,6 @@ extern void perf_event_enable(struct perf_event *event); extern void perf_event_disable(struct perf_event *event); extern int __perf_event_disable(void *info); extern void perf_event_task_tick(void); -extern void perf_restore_debug_store(void); #else static inline void perf_event_task_sched_in(struct task_struct *prev, @@ -798,6 +797,11 @@ static inline void perf_event_enable(struct perf_event *event) { } static inline void perf_event_disable(struct perf_event *event) { } static inline int __perf_event_disable(void *info) { return -1; } static inline void perf_event_task_tick(void) { } +#endif + +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL) +extern void perf_restore_debug_store(void); +#else static inline void perf_restore_debug_store(void) { } #endif -- cgit v1.2.3 From 65c10553552b487a71bf5e4676743435046fae6f Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 14 Mar 2013 20:52:30 +0900 Subject: kprobes: Make hash_64() as always inlined Because hash_64() is called from the get_kprobe() inside int3 handler, kernel causes int3 recursion and crashes if kprobes user puts a probe on it. Usually hash_64() is inlined into caller function, but in some cases, it has instances by gcc's interprocedural constant propagation. This patch uses __always_inline instead of inline to prevent gcc from doing such things. Reported-by: Timo Juhani Lindfors Signed-off-by: Masami Hiramatsu Acked-by: Ananth N Mavinakayanahalli Cc: Pavel Emelyanov Cc: Jiri Kosina Cc: Nadia Yvette Chambers Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20130314115230.19690.39387.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar --- include/linux/hash.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hash.h b/include/linux/hash.h index 61c97ae22e01..f09a0ae4d858 100644 --- a/include/linux/hash.h +++ b/include/linux/hash.h @@ -15,6 +15,7 @@ */ #include +#include /* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */ #define GOLDEN_RATIO_PRIME_32 0x9e370001UL @@ -31,7 +32,7 @@ #error Wordsize not 32 or 64 #endif -static inline u64 hash_64(u64 val, unsigned int bits) +static __always_inline u64 hash_64(u64 val, unsigned int bits) { u64 hash = val; -- cgit v1.2.3 From f445f11eb2cc265dd47da5b2e864df46cd6e5a82 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 14 Mar 2013 17:13:46 -0700 Subject: KVM: allow host header to be included even for !CONFIG_KVM The new context tracking subsystem unconditionally includes kvm_host.h headers for the guest enter/exit macros. This causes a compile failure when KVM is not enabled. Fix by adding an IS_ENABLED(CONFIG_KVM) check to kvm_host so it can be included/compiled even when KVM is not enabled. Cc: Frederic Weisbecker Signed-off-by: Kevin Hilman Signed-off-by: Marcelo Tosatti --- include/linux/kvm_host.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index cad77fe09d77..a9428635c9fd 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -1,6 +1,8 @@ #ifndef __KVM_HOST_H #define __KVM_HOST_H +#if IS_ENABLED(CONFIG_KVM) + /* * This work is licensed under the terms of the GNU GPL, version 2. See * the COPYING file in the top-level directory. @@ -1055,5 +1057,8 @@ static inline bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu) } #endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */ +#else +static inline void __guest_enter(void) { return; } +static inline void __guest_exit(void) { return; } +#endif /* IS_ENABLED(CONFIG_KVM) */ #endif - -- cgit v1.2.3 From 7fa4cd1a78ea5af688ffce45553abbee9d7afd84 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2013 10:35:44 -0300 Subject: usb: ulpi: Define a *otg_ulpi_create no-op Building a kernel for imx_v4_v5_defconfig with CONFIG_USB_ULPI disabled, results in the following error: arch/arm/mach-imx/built-in.o: In function 'pca100_init': platform-mx2-emma.c:(.init.text+0x6788): undefined reference to 'otg_ulpi_create' platform-mx2-emma.c:(.init.text+0x682c): undefined reference to 'mxc_ulpi_access_ops' Fix this by providing a no-op definition of *otg_ulpi_create for the case when CONFIG_USB_ULPI is not defined. Acked-by: Igor Grinberg Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi --- include/linux/usb/ulpi.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 6f033a415ecb..5c295c26ad37 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -181,8 +181,16 @@ /*-------------------------------------------------------------------------*/ +#if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); +#else +static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, + unsigned int flags) +{ + return NULL; +} +#endif #ifdef CONFIG_USB_ULPI_VIEWPORT /* access ops for controllers with a viewport register */ -- cgit v1.2.3 From e5b33dc9d16053c2ae4c2c669cf008829530364b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 19 Mar 2013 09:21:10 +0100 Subject: USB: serial: add modem-status-change wait queue Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index ef9be7e1e190..1819b59aab2a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -66,6 +66,7 @@ * port. * @flags: usb serial port flags * @write_wait: a wait_queue_head_t used by the port. + * @delta_msr_wait: modem-status-change wait queue * @work: work queue entry for the line discipline waking up. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us @@ -112,6 +113,7 @@ struct usb_serial_port { unsigned long flags; wait_queue_head_t write_wait; + wait_queue_head_t delta_msr_wait; struct work_struct work; char throttled; char throttle_req; -- cgit v1.2.3 From 09a6e1f4ad32243989b30485f78985c0923284cd Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 22 Mar 2013 08:08:06 -0300 Subject: Revert "KVM: allow host header to be included even for !CONFIG_KVM" This reverts commit f445f11eb2cc265dd47da5b2e864df46cd6e5a82 as it breaks PPC with CONFIG_KVM=n. Signed-off-by: Marcelo Tosatti --- include/linux/kvm_host.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index a9428635c9fd..cad77fe09d77 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -1,8 +1,6 @@ #ifndef __KVM_HOST_H #define __KVM_HOST_H -#if IS_ENABLED(CONFIG_KVM) - /* * This work is licensed under the terms of the GNU GPL, version 2. See * the COPYING file in the top-level directory. @@ -1057,8 +1055,5 @@ static inline bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu) } #endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */ -#else -static inline void __guest_enter(void) { return; } -static inline void __guest_exit(void) { return; } -#endif /* IS_ENABLED(CONFIG_KVM) */ #endif + -- cgit v1.2.3 From fe8d52614bd419cedef85ef55850fd090373f481 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 22 Mar 2013 15:04:37 -0700 Subject: irq_work.h: fix warning when CONFIG_IRQ_WORK=n A randconfig caught repeated compiler warnings when CONFIG_IRQ_WORK=n due to the definition of a non-inline static function in : include/linux/irq_work.h +40 : warning: 'irq_work_needs_cpu' defined but not used Make it inline to supress the warning. This is caused commit 00b42959106a ("irq_work: Don't stop the tick with pending works") merged in v3.9-rc1. Signed-off-by: James Hogan Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/irq_work.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h index f5dbce50466e..66017028dcb3 100644 --- a/include/linux/irq_work.h +++ b/include/linux/irq_work.h @@ -37,7 +37,7 @@ void irq_work_sync(struct irq_work *work); #ifdef CONFIG_IRQ_WORK bool irq_work_needs_cpu(void); #else -static bool irq_work_needs_cpu(void) { return false; } +static inline bool irq_work_needs_cpu(void) { return false; } #endif #endif /* _LINUX_IRQ_WORK_H */ -- cgit v1.2.3 From dc72c32e1fd872a9a4fdfe645283c9dcd68e556d Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 22 Mar 2013 15:04:39 -0700 Subject: printk: Provide a wake_up_klogd() off-case wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk() nor printk_sched() are in use and there are actually no waiter on log_wait waitqueue. It should be a stub in this case for users like bust_spinlocks(). Otherwise this results in this warning when CONFIG_PRINTK=n and CONFIG_IRQ_WORK=n: kernel/built-in.o In function `wake_up_klogd': (.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue' To fix this, provide an off-case for wake_up_klogd() when CONFIG_PRINTK=n. There is much more from console_unlock() and other console related code in printk.c that should be moved under CONFIG_PRINTK. But for now, focus on a minimal fix as we passed the merged window already. [akpm@linux-foundation.org: include printk.h in bust_spinlocks.c] Signed-off-by: Frederic Weisbecker Reported-by: James Hogan Cc: James Hogan Cc: Steven Rostedt Cc: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 1 - include/linux/printk.h | 6 ++++ kernel/printk.c | 80 ++++++++++++++++++++++++-------------------------- lib/bust_spinlocks.c | 3 +- 4 files changed, 46 insertions(+), 44 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 80d36874689b..79fdd80a42d4 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -390,7 +390,6 @@ extern struct pid *session_of_pgrp(struct pid *pgrp); unsigned long int_sqrt(unsigned long); extern void bust_spinlocks(int yes); -extern void wake_up_klogd(void); extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ extern int panic_timeout; extern int panic_on_oops; diff --git a/include/linux/printk.h b/include/linux/printk.h index 1249a54d17e0..822171fcb1c8 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -134,6 +134,8 @@ extern int printk_delay_msec; extern int dmesg_restrict; extern int kptr_restrict; +extern void wake_up_klogd(void); + void log_buf_kexec_setup(void); void __init setup_log_buf(int early); #else @@ -162,6 +164,10 @@ static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, return false; } +static inline void wake_up_klogd(void) +{ +} + static inline void log_buf_kexec_setup(void) { } diff --git a/kernel/printk.c b/kernel/printk.c index 0b31715f335a..abbdd9e2ac82 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -63,8 +63,6 @@ void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...) #define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */ #define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */ -DECLARE_WAIT_QUEUE_HEAD(log_wait); - int console_printk[4] = { DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */ DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */ @@ -224,6 +222,7 @@ struct log { static DEFINE_RAW_SPINLOCK(logbuf_lock); #ifdef CONFIG_PRINTK +DECLARE_WAIT_QUEUE_HEAD(log_wait); /* the next printk record to read by syslog(READ) or /proc/kmsg */ static u64 syslog_seq; static u32 syslog_idx; @@ -1957,45 +1956,6 @@ int is_console_locked(void) return console_locked; } -/* - * Delayed printk version, for scheduler-internal messages: - */ -#define PRINTK_BUF_SIZE 512 - -#define PRINTK_PENDING_WAKEUP 0x01 -#define PRINTK_PENDING_SCHED 0x02 - -static DEFINE_PER_CPU(int, printk_pending); -static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf); - -static void wake_up_klogd_work_func(struct irq_work *irq_work) -{ - int pending = __this_cpu_xchg(printk_pending, 0); - - if (pending & PRINTK_PENDING_SCHED) { - char *buf = __get_cpu_var(printk_sched_buf); - printk(KERN_WARNING "[sched_delayed] %s", buf); - } - - if (pending & PRINTK_PENDING_WAKEUP) - wake_up_interruptible(&log_wait); -} - -static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = { - .func = wake_up_klogd_work_func, - .flags = IRQ_WORK_LAZY, -}; - -void wake_up_klogd(void) -{ - preempt_disable(); - if (waitqueue_active(&log_wait)) { - this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP); - irq_work_queue(&__get_cpu_var(wake_up_klogd_work)); - } - preempt_enable(); -} - static void console_cont_flush(char *text, size_t size) { unsigned long flags; @@ -2458,6 +2418,44 @@ static int __init printk_late_init(void) late_initcall(printk_late_init); #if defined CONFIG_PRINTK +/* + * Delayed printk version, for scheduler-internal messages: + */ +#define PRINTK_BUF_SIZE 512 + +#define PRINTK_PENDING_WAKEUP 0x01 +#define PRINTK_PENDING_SCHED 0x02 + +static DEFINE_PER_CPU(int, printk_pending); +static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf); + +static void wake_up_klogd_work_func(struct irq_work *irq_work) +{ + int pending = __this_cpu_xchg(printk_pending, 0); + + if (pending & PRINTK_PENDING_SCHED) { + char *buf = __get_cpu_var(printk_sched_buf); + printk(KERN_WARNING "[sched_delayed] %s", buf); + } + + if (pending & PRINTK_PENDING_WAKEUP) + wake_up_interruptible(&log_wait); +} + +static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = { + .func = wake_up_klogd_work_func, + .flags = IRQ_WORK_LAZY, +}; + +void wake_up_klogd(void) +{ + preempt_disable(); + if (waitqueue_active(&log_wait)) { + this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP); + irq_work_queue(&__get_cpu_var(wake_up_klogd_work)); + } + preempt_enable(); +} int printk_sched(const char *fmt, ...) { diff --git a/lib/bust_spinlocks.c b/lib/bust_spinlocks.c index 9681d54b95d1..f8e0e5367398 100644 --- a/lib/bust_spinlocks.c +++ b/lib/bust_spinlocks.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -28,5 +29,3 @@ void __attribute__((weak)) bust_spinlocks(int yes) wake_up_klogd(); } } - - -- cgit v1.2.3 From f9228b204f789493117e458d2fefae937edb7272 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Fri, 22 Mar 2013 15:04:43 -0700 Subject: mm: zone_end_pfn is too small Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output below). The key hint is "page 4294967296 outside zone". 4294967296 = 0x100000000 (bit 32 is set). The problem is in include/linux/mmzone.h: 530 static inline unsigned zone_end_pfn(const struct zone *zone) 531 { 532 return zone->zone_start_pfn + zone->spanned_pages; 533 } zone_end_pfn is "unsigned" (32 bits). Changing it to "unsigned long" (64 bits) fixes the problem. zone_end_pfn() was added recently in commit 108bcc96ef70 ("mm: add & use zone_end_pfn() and zone_spans_pfn()") Output from the failure. No AGP bridge found page 4294967296 outside zone [ 4294967296 - 4327469056 ] ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:552! invalid opcode: 0000 [#1] SMP Modules linked in: CPU 0 Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10 RIP: free_one_page+0x382/0x430 Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420) Call Trace: __free_pages_ok+0x96/0xb0 __free_pages+0x25/0x50 __free_pages_bootmem+0x8a/0x8c __free_memory_core+0xea/0x131 free_low_memory_core_early+0x4a/0x98 free_all_bootmem+0x45/0x47 mem_init+0x7b/0x14c start_kernel+0x216/0x433 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x144/0x153 Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49 Signed-off-by: Russ Anderson Reported-by: George Beshers Acked-by: Hedi Berriche Cc: Cody P Schafer Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index ede274957e05..c74092eebf5c 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -527,7 +527,7 @@ static inline int zone_is_oom_locked(const struct zone *zone) return test_bit(ZONE_OOM_LOCKED, &zone->flags); } -static inline unsigned zone_end_pfn(const struct zone *zone) +static inline unsigned long zone_end_pfn(const struct zone *zone) { return zone->zone_start_pfn + zone->spanned_pages; } -- cgit v1.2.3