From b59320cc5a5e6ceaa17f0895ffbe0711ebad7adf Mon Sep 17 00:00:00 2001 From: Daniel Jeong Date: Mon, 17 Dec 2012 10:24:06 +0900 Subject: regulator: lp8755: new driver for LP8755 This patch is for new lp8755 regulator dirver and several unsed variables were deleted and then test was done. LP8755 : The LP8755 is a high performance power management unit.It contains six step-down DC-DC converters which can can be filexibly bundled together in multiphase converters as required by application. www.ti.com Signed-off-by: Daniel Jeong Signed-off-by: Mark Brown --- include/linux/platform_data/lp8755.h | 71 ++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 include/linux/platform_data/lp8755.h (limited to 'include/linux') diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h new file mode 100644 index 000000000000..a7fd0776c9bf --- /dev/null +++ b/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong + * G.Shark Jeong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif -- cgit v1.2.3 From c8520b4c5d25eb7b8b54f1ae9ba7da71375f2b2c Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 18 Dec 2012 09:30:10 +0800 Subject: regulator: core: Allow specify apply_[reg|bit] for regmap based voltage_sel operations Some DVM regulators needs to update apply_bit after setting vsel_reg to initiate voltage change on the output. This patch adds apply_reg and apply_bit to struct regulator_desc and update regulator_set_voltage_sel_regmap() to set apply_bit of apply_reg when apply_bit is set. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/core.c | 12 +++++++++++- include/linux/regulator/driver.h | 6 ++++++ 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0f65b246cc0c..571ce0f1c06e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2074,10 +2074,20 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); */ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) { + int ret; + sel <<= ffs(rdev->desc->vsel_mask) - 1; - return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, rdev->desc->vsel_mask, sel); + if (ret) + return ret; + + if (rdev->desc->apply_bit) + ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg, + rdev->desc->apply_bit, + rdev->desc->apply_bit); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d10bb0f39c5e..23070fd83872 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -193,6 +193,10 @@ enum regulator_type { * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @apply_reg: Register for initiate voltage change on the output when + * using regulator_set_voltage_sel_regmap + * @apply_bit: Register bitfield used for initiate voltage change on the + * output when using regulator_set_voltage_sel_regmap * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops * @@ -218,6 +222,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int apply_reg; + unsigned int apply_bit; unsigned int enable_reg; unsigned int enable_mask; unsigned int bypass_reg; -- cgit v1.2.3 From 26aec009f6b61c077c6de1a96cca7a5132851dbe Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Sun, 3 Feb 2013 15:49:47 -0800 Subject: regulator: add device tree support for s5m8767 This device tree support is added for PMIC block of S5m8767 multi function driver. The usage detail is added in the device tree documentation section. This change is tested on exynos5250 based arndale platform by regulator voltage set/get API's. Reviewed-by: Thomas Abraham Signed-off-by: Amit Daniel Kachhap Tested-by: Sachin Kamat Signed-off-by: Mark Brown --- .../bindings/regulator/s5m8767-regulator.txt | 152 +++++++++++++++++ drivers/mfd/sec-core.c | 75 ++++++++- drivers/regulator/s5m8767.c | 186 ++++++++++++++++++++- include/linux/mfd/samsung/core.h | 11 +- 4 files changed, 417 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt new file mode 100644 index 000000000000..a35ff99003a5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -0,0 +1,152 @@ +* Samsung S5M8767 Voltage and Current Regulator + +The Samsung S5M8767 is a multi-function device which includes volatage and +current regulators, rtc, charger controller and other sub-blocks. It is +interfaced to the host controller using a i2c interface. Each sub-block is +addressed by the host system using different i2c slave address. This document +describes the bindings for 'pmic' sub-block of s5m8767. + +Required properties: +- compatible: Should be "samsung,s5m8767-pmic". +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck3 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck4 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. + +[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s5m8767 are delivered to. +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for 'irq1' interrupt. + - Second interrupt specifier is for 'alert' interrupt. +- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. +- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. +- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: + +- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + +- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + +Regulators: The regulators of s5m8767 that have to be instantiated should be +included in a sub-node named 'regulators'. Regulator nodes included in this +sub-node should be of the format as listed below. + + regulator_name { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + }; +The above regulator entries are defined in regulator bindings documentation +except op_mode description. + - op_mode: describes the different operating modes of the LDO's with + power mode change in SOC. The different possible values are, + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + +The following are the names of the regulators that the s5m8767 pmic block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of s5m8767. + + - LDOn + - valid values for n are 1 to 28 + - Example: LDO0, LD01, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 + +The bindings inside the regulator nodes use the standard regulator bindings +which are documented elsewhere. + +Example: + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-uses-gpio-dvs; + s5m8767,pmic-buck3-uses-gpio-dvs; + s5m8767,pmic-buck4-uses-gpio-dvs; + + s5m8767,pmic-buck-default-dvs-idx = <0>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */ + <&gpx0 1 1 0 0>, /* DVS2 */ + <&gpx0 2 1 0 0>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */ + <&gpx2 4 1 0 0>, /* SET2 */ + <&gpx2 5 1 0 0>; /* SET3 */ + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 49d361a618d0..ae029834d0a0 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -60,6 +61,15 @@ static struct mfd_cell s2mps11_devs[] = { }, }; +#ifdef CONFIG_OF +static struct of_device_id sec_dt_match[] = { + { .compatible = "samsung,s5m8767-pmic", + .data = (void *)S5M8767X, + }, + {}, +}; +#endif + int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest) { return regmap_read(sec_pmic->regmap, reg, dest); @@ -95,6 +105,57 @@ static struct regmap_config sec_regmap_config = { .val_bits = 8, }; + +#ifdef CONFIG_OF +/* + * Only the common platform data elements for s5m8767 are parsed here from the + * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and + * others have to parse their own platform data elements from device tree. + * + * The s5m8767 platform data structure is instantiated here and the drivers for + * the sub-modules need not instantiate another instance while parsing their + * platform data. + */ +static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( + struct device *dev) +{ + struct sec_platform_data *pd; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* + * ToDo: the 'wakeup' member in the platform data is more of a linux + * specfic information. Hence, there is no binding for that yet and + * not parsed here. + */ + + return pd; +} +#else +static struct sec_platform_data *sec_i2c_parse_dt_pdata( + struct device *dev) +{ + return 0; +} +#endif + +static inline int sec_i2c_get_driver_data(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ +#ifdef CONFIG_OF + if (i2c->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(sec_dt_match, i2c->dev.of_node); + return (int)match->data; + } +#endif + return (int)id->driver_data; +} + static int sec_pmic_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -111,13 +172,22 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_pmic->dev = &i2c->dev; sec_pmic->i2c = i2c; sec_pmic->irq = i2c->irq; - sec_pmic->type = id->driver_data; - + sec_pmic->type = sec_i2c_get_driver_data(i2c, id); + + if (sec_pmic->dev->of_node) { + pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev); + if (IS_ERR(pdata)) { + ret = PTR_ERR(pdata); + return ret; + } + pdata->device_type = sec_pmic->type; + } if (pdata) { sec_pmic->device_type = pdata->device_type; sec_pmic->ono = pdata->ono; sec_pmic->irq_base = pdata->irq_base; sec_pmic->wakeup = pdata->wakeup; + sec_pmic->pdata = pdata; } sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config); @@ -192,6 +262,7 @@ static struct i2c_driver sec_pmic_driver = { .driver = { .name = "sec_pmic", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sec_dt_match), }, .probe = sec_pmic_probe, .remove = sec_pmic_remove, diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index aa0ccef5c31c..1250cef43d7b 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,6 +22,9 @@ #include #include #include +#include + +#define S5M8767_OPMODE_NORMAL_MODE 0x1 struct s5m8767_info { struct device *dev; @@ -474,15 +478,194 @@ static struct regulator_desc regulators[] = { s5m8767_regulator_desc(BUCK9), }; +#ifdef CONFIG_OF +static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata, + struct device_node *pmic_np) +{ + int i, gpio; + + for (i = 0; i < 3; i++) { + gpio = of_get_named_gpio(pmic_np, + "s5m8767,pmic-buck-dvs-gpios", i); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); + return -EINVAL; + } + pdata->buck_gpios[i] = gpio; + } + return 0; +} + +static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata, + struct device_node *pmic_np) +{ + int i, gpio; + + for (i = 0; i < 3; i++) { + gpio = of_get_named_gpio(pmic_np, + "s5m8767,pmic-buck-ds-gpios", i); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); + return -EINVAL; + } + pdata->buck_ds[i] = gpio; + } + return 0; +} + +static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata) +{ + struct device_node *pmic_np, *regulators_np, *reg_np; + struct sec_regulator_data *rdata; + struct sec_opmode_data *rmode; + unsigned int i, dvs_voltage_nr = 1, ret; + + pmic_np = iodev->dev->of_node; + if (!pmic_np) { + dev_err(iodev->dev, "could not find pmic sub-node\n"); + return -ENODEV; + } + + regulators_np = of_find_node_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = 0; + for_each_child_of_node(regulators_np, reg_np) + pdata->num_regulators++; + + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator data\n"); + return -ENOMEM; + } + + rmode = devm_kzalloc(iodev->dev, sizeof(*rmode) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator mode\n"); + return -ENOMEM; + } + + pdata->regulators = rdata; + pdata->opmode = rmode; + for_each_child_of_node(regulators_np, reg_np) { + for (i = 0; i < ARRAY_SIZE(regulators); i++) + if (!of_node_cmp(reg_np->name, regulators[i].name)) + break; + + if (i == ARRAY_SIZE(regulators)) { + dev_warn(iodev->dev, + "don't know how to configure regulator %s\n", + reg_np->name); + continue; + } + + rdata->id = i; + rdata->initdata = of_get_regulator_init_data( + iodev->dev, reg_np); + rdata->reg_node = reg_np; + rdata++; + rmode->id = i; + if (of_property_read_u32(reg_np, "op_mode", + &rmode->mode)) { + dev_warn(iodev->dev, + "no op_mode property property at %s\n", + reg_np->full_name); + + rmode->mode = S5M8767_OPMODE_NORMAL_MODE; + } + rmode++; + } + + if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) + pdata->buck2_gpiodvs = true; + + if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL)) + pdata->buck3_gpiodvs = true; + + if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL)) + pdata->buck4_gpiodvs = true; + + if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || + pdata->buck4_gpiodvs) { + ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_property_read_u32(pmic_np, + "s5m8767,pmic-buck-default-dvs-idx", + &pdata->buck_default_idx)) { + pdata->buck_default_idx = 0; + } else { + if (pdata->buck_default_idx >= 8) { + pdata->buck_default_idx = 0; + dev_info(iodev->dev, + "invalid value for default dvs index, use 0\n"); + } + } + dvs_voltage_nr = 8; + } + + ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck2-dvs-voltage", + pdata->buck2_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck2 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck3-dvs-voltage", + pdata->buck3_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck3 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck4-dvs-voltage", + pdata->buck4_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck4 voltages not specified\n"); + return -EINVAL; + } + + return 0; +} +#else +static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + static int s5m8767_pmic_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); + struct sec_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; struct regulator_dev **rdev; struct s5m8767_info *s5m8767; int i, ret, size, buck_init; + if (iodev->dev->of_node) { + ret = s5m8767_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } + if (!pdata) { dev_err(pdev->dev.parent, "Platform data not supplied\n"); return -ENODEV; @@ -726,6 +909,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.init_data = pdata->regulators[i].initdata; config.driver_data = s5m8767; config.regmap = iodev->regmap; + config.of_node = pdata->regulators[i].reg_node; rdev[i] = regulator_register(®ulators[id], &config); if (IS_ERR(rdev[i])) { diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index b50c38f8bc48..f0f4de3b4ccc 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -26,6 +26,7 @@ enum sec_device_type { /** * struct sec_pmic_dev - s5m87xx master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) + * @pdata: pointer to private data used to pass platform data to child * @i2c: i2c client private data for regulator * @rtc: i2c client private data for rtc * @iolock: mutex for serializing io access @@ -39,6 +40,7 @@ enum sec_device_type { */ struct sec_pmic_dev { struct device *dev; + struct sec_platform_data *pdata; struct regmap *regmap; struct i2c_client *i2c; struct i2c_client *rtc; @@ -82,11 +84,11 @@ struct sec_platform_data { int buck_gpios[3]; int buck_ds[3]; - int buck2_voltage[8]; + unsigned int buck2_voltage[8]; bool buck2_gpiodvs; - int buck3_voltage[8]; + unsigned int buck3_voltage[8]; bool buck3_gpiodvs; - int buck4_voltage[8]; + unsigned int buck4_voltage[8]; bool buck4_gpiodvs; int buck_set1; @@ -127,6 +129,7 @@ struct sec_platform_data { struct sec_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; /* @@ -136,7 +139,7 @@ struct sec_regulator_data { */ struct sec_opmode_data { int id; - int mode; + unsigned int mode; }; /* -- cgit v1.2.3