From 98104fdeda63d57631c9f89e90a7b83b58fcee40 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 16 Jun 2012 00:19:54 +0200 Subject: cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2f3878806403..458416279347 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -565,6 +565,14 @@ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with + * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the + * P2P Device can be used for P2P operations, e.g. remain-on-channel and + * public action frame TX. + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -708,6 +716,9 @@ enum nl80211_commands { NL80211_CMD_CH_SWITCH_NOTIFY, + NL80211_CMD_START_P2P_DEVICE, + NL80211_CMD_STOP_P2P_DEVICE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1575,6 +1586,10 @@ enum nl80211_attrs { * @NL80211_IFTYPE_MESH_POINT: mesh point * @NL80211_IFTYPE_P2P_CLIENT: P2P client * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -1593,6 +1608,7 @@ enum nl80211_iftype { NL80211_IFTYPE_MESH_POINT, NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, /* keep last */ NUM_NL80211_IFTYPES, @@ -2994,12 +3010,18 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active + * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel + * in the interface combinations, even when it's only used for scan + * and remain-on-channel. This could be due to, for example, the + * remain-on-channel implementation requiring a channel context. */ enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, - NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, - NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, }; /** -- cgit v1.2.3 From 06d7de831dab8b93adb86e039a2f3d36604a9197 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 26 Jul 2012 09:51:08 +0800 Subject: Revert "rfkill: remove dead code" This reverts commit 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68. Those functions are needed and should not be removed, or there is no way to set the rfkill led trigger name. Signed-off-by: AceLan Kao Signed-off-by: Johannes Berg --- include/linux/rfkill.h | 31 +++++++++++++++++++++++++++++++ net/rfkill/core.c | 14 ++++++++++++++ 2 files changed, 45 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 6fdf02737e9d..0ec590bb3611 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -354,6 +354,37 @@ static inline bool rfkill_blocked(struct rfkill *rfkill) } #endif /* RFKILL || RFKILL_MODULE */ + +#ifdef CONFIG_RFKILL_LEDS +/** + * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. + * This function might return a NULL pointer if registering of the + * LED trigger failed. Use this as "default_trigger" for the LED. + */ +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); + +/** + * rfkill_set_led_trigger_name -- set the LED trigger name + * @rfkill: rfkill struct + * @name: LED trigger name + * + * This function sets the LED trigger name of the radio LED + * trigger that rfkill creates. It is optional, but if called + * must be called before rfkill_register() to be effective. + */ +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); +#else +static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ + return NULL; +} + +static inline void +rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ +} +#endif + #endif /* __KERNEL__ */ #endif /* RFKILL_H */ diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 752b72360ebc..c275bad12068 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -150,6 +150,20 @@ static void rfkill_led_trigger_activate(struct led_classdev *led) rfkill_led_trigger_event(rfkill); } +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ + return rfkill->led_trigger.name; +} +EXPORT_SYMBOL(rfkill_get_led_trigger_name); + +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ + BUG_ON(!rfkill); + + rfkill->ledtrigname = name; +} +EXPORT_SYMBOL(rfkill_set_led_trigger_name); + static int rfkill_led_trigger_register(struct rfkill *rfkill) { rfkill->led_trigger.name = rfkill->ledtrigname -- cgit v1.2.3 From d57ef3a6a2eeb88df47e892c66692e3f59722ffe Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 10 Aug 2012 21:23:53 +0200 Subject: bcma: detect and register serial flash device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/Kconfig | 2 +- drivers/bcma/bcma_private.h | 1 + drivers/bcma/driver_chipcommon_sflash.c | 123 +++++++++++++++++++++++++++- drivers/bcma/main.c | 9 ++ include/linux/bcma/bcma_driver_chipcommon.h | 13 +++ include/linux/bcma/bcma_regs.h | 2 + 6 files changed, 146 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig index 06b3207adebd..cf6e4dd22fd2 100644 --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -48,7 +48,7 @@ config BCMA_DRIVER_MIPS config BCMA_SFLASH bool - depends on BCMA_DRIVER_MIPS && BROKEN + depends on BCMA_DRIVER_MIPS default y config BCMA_NFLASH diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 3cf9cc923cd2..94bf07c54a43 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -54,6 +54,7 @@ u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); #ifdef CONFIG_BCMA_SFLASH /* driver_chipcommon_sflash.c */ int bcma_sflash_init(struct bcma_drv_cc *cc); +extern struct platform_device bcma_sflash_dev; #else static inline int bcma_sflash_init(struct bcma_drv_cc *cc) { diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c index 6e157a58a1d7..2c4eec2ca5a0 100644 --- a/drivers/bcma/driver_chipcommon_sflash.c +++ b/drivers/bcma/driver_chipcommon_sflash.c @@ -5,15 +5,132 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include #include -#include -#include #include "bcma_private.h" +static struct resource bcma_sflash_resource = { + .name = "bcma_sflash", + .start = BCMA_SFLASH, + .end = 0, + .flags = IORESOURCE_MEM | IORESOURCE_READONLY, +}; + +struct platform_device bcma_sflash_dev = { + .name = "bcma_sflash", + .resource = &bcma_sflash_resource, + .num_resources = 1, +}; + +struct bcma_sflash_tbl_e { + char *name; + u32 id; + u32 blocksize; + u16 numblocks; +}; + +static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { + { "", 0x14, 0x10000, 32, }, + { 0 }, +}; + +static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { + { 0 }, +}; + +static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { + { 0 }, +}; + +static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) +{ + int i; + bcma_cc_write32(cc, BCMA_CC_FLASHCTL, + BCMA_CC_FLASHCTL_START | opcode); + for (i = 0; i < 1000; i++) { + if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & + BCMA_CC_FLASHCTL_BUSY)) + return; + cpu_relax(); + } + bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); +} + /* Initialize serial flash access */ int bcma_sflash_init(struct bcma_drv_cc *cc) { - bcma_err(cc->core->bus, "Serial flash support is broken\n"); + struct bcma_bus *bus = cc->core->bus; + struct bcma_sflash *sflash = &cc->sflash; + struct bcma_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { + case BCMA_CC_FLASHT_STSER: + bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); + + bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); + bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); + id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); + + bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); + bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); + id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); + + switch (id) { + case 0xbf: + for (e = bcma_sflash_sst_tbl; e->name; e++) { + if (e->id == id2) + break; + } + break; + default: + for (e = bcma_sflash_st_tbl; e->name; e++) { + if (e->id == id) + break; + } + break; + } + if (!e->name) { + bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2); + return -ENOTSUPP; + } + + break; + case BCMA_CC_FLASHT_ATSER: + bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); + id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; + + for (e = bcma_sflash_at_tbl; e->name; e++) { + if (e->id == id) + break; + } + if (!e->name) { + bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id); + return -ENOTSUPP; + } + + break; + default: + bcma_err(bus, "Unsupported flash type\n"); + return -ENOTSUPP; + } + + sflash->window = BCMA_SFLASH; + sflash->blocksize = e->blocksize; + sflash->numblocks = e->numblocks; + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + + bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", + e->name, sflash->size / 1024, sflash->blocksize, + sflash->numblocks); + + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ + bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start + + sflash->size; + bcma_sflash_dev.dev.platform_data = sflash; + return 0; } diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 758af9ccdef0..a501d259287c 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -7,6 +7,7 @@ #include "bcma_private.h" #include +#include #include #include @@ -136,6 +137,14 @@ static int bcma_register_cores(struct bcma_bus *bus) dev_id++; } +#ifdef CONFIG_BCMA_SFLASH + if (bus->drv_cc.sflash.present) { + err = platform_device_register(&bcma_sflash_dev); + if (err) + bcma_err(bus, "Error registering serial flash\n"); + } +#endif + return 0; } diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index fcb06fb284eb..bed89694c5f9 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -509,6 +509,16 @@ struct bcma_pflash { u32 window_size; }; +#ifdef CONFIG_BCMA_SFLASH +struct bcma_sflash { + bool present; + u32 window; + u32 blocksize; + u16 numblocks; + u32 size; +}; +#endif + struct bcma_serial_port { void *regs; unsigned long clockspeed; @@ -529,6 +539,9 @@ struct bcma_drv_cc { struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash pflash; +#ifdef CONFIG_BCMA_SFLASH + struct bcma_sflash sflash; +#endif int nr_serial_ports; struct bcma_serial_port serial_ports[4]; diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index a393e82bf7bf..6c9cb93ae3de 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -85,4 +85,6 @@ * (2 ZettaBytes), high 32 bits */ +#define BCMA_SFLASH 0x1c000000 + #endif /* LINUX_BCMA_REGS_H_ */ -- cgit v1.2.3 From 371a00448f95adaa612cf1a0b31a11e7093bc706 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 12 Aug 2012 13:08:05 +0200 Subject: bcma: detect and register NAND flash device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/Kconfig | 2 +- drivers/bcma/bcma_private.h | 1 + drivers/bcma/driver_chipcommon_nflash.c | 28 +++++++++++++++++++++++++--- drivers/bcma/main.c | 8 ++++++++ include/linux/bcma/bcma_driver_chipcommon.h | 13 +++++++++++++ 5 files changed, 48 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig index cf6e4dd22fd2..a533af218368 100644 --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -53,7 +53,7 @@ config BCMA_SFLASH config BCMA_NFLASH bool - depends on BCMA_DRIVER_MIPS && BROKEN + depends on BCMA_DRIVER_MIPS default y config BCMA_DRIVER_GMAC_CMN diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 94bf07c54a43..169fc58427d3 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -66,6 +66,7 @@ static inline int bcma_sflash_init(struct bcma_drv_cc *cc) #ifdef CONFIG_BCMA_NFLASH /* driver_chipcommon_nflash.c */ int bcma_nflash_init(struct bcma_drv_cc *cc); +extern struct platform_device bcma_nflash_dev; #else static inline int bcma_nflash_init(struct bcma_drv_cc *cc) { diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index 574d62435bc2..9042781edec3 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -5,15 +5,37 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include #include -#include -#include #include "bcma_private.h" +struct platform_device bcma_nflash_dev = { + .name = "bcma_nflash", + .num_resources = 0, +}; + /* Initialize NAND flash access */ int bcma_nflash_init(struct bcma_drv_cc *cc) { - bcma_err(cc->core->bus, "NAND flash support is broken\n"); + struct bcma_bus *bus = cc->core->bus; + + if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && + cc->core->id.rev != 0x38) { + bcma_err(bus, "NAND flash on unsupported board!\n"); + return -ENOTSUPP; + } + + if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) { + bcma_err(bus, "NAND flash not present according to ChipCommon\n"); + return -ENODEV; + } + + cc->nflash.present = true; + + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ + bcma_nflash_dev.dev.platform_data = &cc->nflash; + return 0; } diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index a501d259287c..a8f570d69075 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -145,6 +145,14 @@ static int bcma_register_cores(struct bcma_bus *bus) } #endif +#ifdef CONFIG_BCMA_NFLASH + if (bus->drv_cc.nflash.present) { + err = platform_device_register(&bcma_nflash_dev); + if (err) + bcma_err(bus, "Error registering NAND flash\n"); + } +#endif + return 0; } diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index bed89694c5f9..9810d4b29abf 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -519,6 +519,16 @@ struct bcma_sflash { }; #endif +#ifdef CONFIG_BCMA_NFLASH +struct mtd_info; + +struct bcma_nflash { + bool present; + + struct mtd_info *mtd; +}; +#endif + struct bcma_serial_port { void *regs; unsigned long clockspeed; @@ -542,6 +552,9 @@ struct bcma_drv_cc { #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif +#ifdef CONFIG_BCMA_NFLASH + struct bcma_nflash nflash; +#endif int nr_serial_ports; struct bcma_serial_port serial_ports[4]; -- cgit v1.2.3