From 81077e82c3f591578625805dd6464a27a9ff56ec Mon Sep 17 00:00:00 2001
From: Lukáš Turek <8an@praha12.net>
Date: Mon, 21 Dec 2009 22:50:47 +0100
Subject: nl80211: Add new WIPHY attribute COVERAGE_CLASS

The new attribute NL80211_ATTR_WIPHY_COVERAGE_CLASS sets IEEE 802.11
Coverage Class, which depends on maximum distance of nodes in a
wireless network. It's required for long distance links (more than a few
hundred meters).

The attribute is now ignored by two non-mac80211 drivers, rndis and
iwmc3200wifi, together with WIPHY_PARAM_RETRY_SHORT and
WIPHY_PARAM_RETRY_LONG. If it turns out to be a problem, we could split
set_wiphy_params callback or add new capability bits.

Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2bfbe88837ef..d4c556de7170 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -430,6 +430,8 @@ enum nl80211_commands {
  * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
  *	larger than or equal to this use RTS/CTS handshake); allowed range:
  *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ *	section 7.3.2.9; dot11CoverageClass; u8
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -779,6 +781,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_COOKIE,
 
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
-- 
cgit v1.2.3


From 13ae75b103e07304a34ab40c9136e9f53e06475c Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Tue, 29 Dec 2009 12:59:45 +0200
Subject: nl80211: New command for setting TX rate mask for rate control

Add a new NL80211_CMD_SET_TX_BITRATE_MASK command and related
attributes to provide support for setting TX rate mask for rate
control. This uses the existing cfg80211 set_bitrate_mask operation
that was previously used only with WEXT compat code (SIOCSIWRATE). The
nl80211 command allows more generic configuration of allowed rates as
a mask instead of fixed/max rate.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  44 +++++++++++++++++++
 include/net/cfg80211.h  |   4 +-
 net/wireless/nl80211.c  | 111 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 157 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index d4c556de7170..7a1c8c145b22 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -295,6 +295,10 @@
  *	This command is also used as an event to notify when a requested
  *	remain-on-channel duration has expired.
  *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -381,6 +385,8 @@ enum nl80211_commands {
 	NL80211_CMD_REMAIN_ON_CHANNEL,
 	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
 
+	NL80211_CMD_SET_TX_BITRATE_MASK,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -640,6 +646,13 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
  *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ *	enum nl80211_band value is used as the index (nla_type() of the nested
+ *	data. If a band is not included, it will be configured to allow all
+ *	rates based on negotiated supported rates information. This attribute
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -783,6 +796,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
 
+	NL80211_ATTR_TX_RATES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1482,4 +1497,33 @@ enum nl80211_key_attributes {
 	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ *	1 = 500 kbps) but without the IE length restriction (at most
+ *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+	__NL80211_TXRATE_INVALID,
+	NL80211_TXRATE_LEGACY,
+
+	/* keep last */
+	__NL80211_TXRATE_AFTER_LAST,
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
+ */
+enum nl80211_band {
+	NL80211_BAND_2GHZ,
+	NL80211_BAND_5GHZ,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 22e062afb5a1..0d734413b5fb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -39,8 +39,8 @@
  * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
  */
 enum ieee80211_band {
-	IEEE80211_BAND_2GHZ,
-	IEEE80211_BAND_5GHZ,
+	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
 
 	/* keep last */
 	IEEE80211_NUM_BANDS
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c09fbcd278fb..b804062e0179 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -144,6 +144,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 				 .len = WLAN_PMKID_LEN },
 	[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
 	[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
+	[NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
 };
 
 /* policy for the attributes */
@@ -575,6 +576,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	CMD(del_pmksa, DEL_PMKSA);
 	CMD(flush_pmksa, FLUSH_PMKSA);
 	CMD(remain_on_channel, REMAIN_ON_CHANNEL);
+	CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
 	if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
 		i++;
 		NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
@@ -4438,6 +4440,109 @@ static int nl80211_cancel_remain_on_channel(struct sk_buff *skb,
 	return err;
 }
 
+static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
+			   u8 *rates, u8 rates_len)
+{
+	u8 i;
+	u32 mask = 0;
+
+	for (i = 0; i < rates_len; i++) {
+		int rate = (rates[i] & 0x7f) * 5;
+		int ridx;
+		for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
+			struct ieee80211_rate *srate =
+				&sband->bitrates[ridx];
+			if (rate == srate->bitrate) {
+				mask |= 1 << ridx;
+				break;
+			}
+		}
+		if (ridx == sband->n_bitrates)
+			return 0; /* rate not found */
+	}
+
+	return mask;
+}
+
+static struct nla_policy
+nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] __read_mostly = {
+	[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+				    .len = NL80211_MAX_SUPP_RATES },
+};
+
+static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
+				       struct genl_info *info)
+{
+	struct nlattr *tb[NL80211_TXRATE_MAX + 1];
+	struct cfg80211_registered_device *rdev;
+	struct cfg80211_bitrate_mask mask;
+	int err, rem, i;
+	struct net_device *dev;
+	struct nlattr *tx_rates;
+	struct ieee80211_supported_band *sband;
+
+	if (info->attrs[NL80211_ATTR_TX_RATES] == NULL)
+		return -EINVAL;
+
+	rtnl_lock();
+
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+	if (err)
+		goto unlock_rtnl;
+
+	if (!rdev->ops->set_bitrate_mask) {
+		err = -EOPNOTSUPP;
+		goto unlock;
+	}
+
+	memset(&mask, 0, sizeof(mask));
+	/* Default to all rates enabled */
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		sband = rdev->wiphy.bands[i];
+		mask.control[i].legacy =
+			sband ? (1 << sband->n_bitrates) - 1 : 0;
+	}
+
+	/*
+	 * The nested attribute uses enum nl80211_band as the index. This maps
+	 * directly to the enum ieee80211_band values used in cfg80211.
+	 */
+	nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem)
+	{
+		enum ieee80211_band band = nla_type(tx_rates);
+		if (band < 0 || band >= IEEE80211_NUM_BANDS) {
+			err = -EINVAL;
+			goto unlock;
+		}
+		sband = rdev->wiphy.bands[band];
+		if (sband == NULL) {
+			err = -EINVAL;
+			goto unlock;
+		}
+		nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
+			  nla_len(tx_rates), nl80211_txattr_policy);
+		if (tb[NL80211_TXRATE_LEGACY]) {
+			mask.control[band].legacy = rateset_to_mask(
+				sband,
+				nla_data(tb[NL80211_TXRATE_LEGACY]),
+				nla_len(tb[NL80211_TXRATE_LEGACY]));
+			if (mask.control[band].legacy == 0) {
+				err = -EINVAL;
+				goto unlock;
+			}
+		}
+	}
+
+	err = rdev->ops->set_bitrate_mask(&rdev->wiphy, dev, NULL, &mask);
+
+ unlock:
+	dev_put(dev);
+	cfg80211_unlock_rdev(rdev);
+ unlock_rtnl:
+	rtnl_unlock();
+	return err;
+}
+
 static struct genl_ops nl80211_ops[] = {
 	{
 		.cmd = NL80211_CMD_GET_WIPHY,
@@ -4712,6 +4817,12 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_SET_TX_BITRATE_MASK,
+		.doit = nl80211_set_tx_bitrate_mask,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
-- 
cgit v1.2.3


From 7044cc565b45a898c140fb185174a66f2d68a163 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 5 Jan 2010 20:16:19 +0200
Subject: mac80211: add functions to create PS Poll and Nullfunc templates

Some hardware, for example wl1251 and wl1271, handle the transmission
of power save related frames in hardware, but the driver is responsible
for creating the templates. It's better to create the templates in mac80211,
that way all drivers can benefit from this.

Add two new functions, ieee80211_pspoll_get() and ieee80211_nullfunc_get()
which drivers need to call to get the frame. Drivers are also responsible
for updating the templates after each association.

Also new struct ieee80211_hdr_3addr is added to ieee80211.h to make it
easy to calculate length of the Nullfunc frame.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h |  9 ++++++
 include/net/mac80211.h    | 30 ++++++++++++++++++
 net/mac80211/tx.c         | 78 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index aeea282bd2fe..602c0692c3fc 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -130,6 +130,15 @@ struct ieee80211_hdr {
 	u8 addr4[6];
 } __attribute__ ((packed));
 
+struct ieee80211_hdr_3addr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+} __attribute__ ((packed));
+
 /**
  * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
  * @fc: frame control bytes in little-endian byteorder
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7e5af6d90b93..75f46e26ad60 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1874,6 +1874,36 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
 }
 
+/**
+ * ieee80211_pspoll_get - retrieve a PS Poll template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a PS Poll a template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * AID, BSSID and MAC address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit.
+ */
+struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_nullfunc_get - retrieve a nullfunc template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Nullfunc template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * BSSID and address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ */
+struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif);
+
 /**
  * ieee80211_rts_get - RTS frame generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d3a44812f8bf..055b45b146d9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2200,6 +2200,84 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL(ieee80211_beacon_get_tim);
 
+struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_managed *ifmgd;
+	struct ieee80211_pspoll *pspoll;
+	struct ieee80211_local *local;
+	struct sk_buff *skb;
+
+	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
+		return NULL;
+
+	sdata = vif_to_sdata(vif);
+	ifmgd = &sdata->u.mgd;
+	local = sdata->local;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll));
+	if (!skb) {
+		printk(KERN_DEBUG "%s: failed to allocate buffer for "
+		       "pspoll template\n", sdata->name);
+		return NULL;
+	}
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	pspoll = (struct ieee80211_pspoll *) skb_put(skb, sizeof(*pspoll));
+	memset(pspoll, 0, sizeof(*pspoll));
+	pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
+					    IEEE80211_STYPE_PSPOLL);
+	pspoll->aid = cpu_to_le16(ifmgd->aid);
+
+	/* aid in PS-Poll has its two MSBs each set to 1 */
+	pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14);
+
+	memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN);
+	memcpy(pspoll->ta, vif->addr, ETH_ALEN);
+
+	return skb;
+}
+EXPORT_SYMBOL(ieee80211_pspoll_get);
+
+struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif)
+{
+	struct ieee80211_hdr_3addr *nullfunc;
+	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_managed *ifmgd;
+	struct ieee80211_local *local;
+	struct sk_buff *skb;
+
+	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
+		return NULL;
+
+	sdata = vif_to_sdata(vif);
+	ifmgd = &sdata->u.mgd;
+	local = sdata->local;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*nullfunc));
+	if (!skb) {
+		printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc "
+		       "template\n", sdata->name);
+		return NULL;
+	}
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = (struct ieee80211_hdr_3addr *) skb_put(skb,
+							  sizeof(*nullfunc));
+	memset(nullfunc, 0, sizeof(*nullfunc));
+	nullfunc->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					      IEEE80211_STYPE_NULLFUNC |
+					      IEEE80211_FCTL_TODS);
+	memcpy(nullfunc->addr1, ifmgd->bssid, ETH_ALEN);
+	memcpy(nullfunc->addr2, vif->addr, ETH_ALEN);
+	memcpy(nullfunc->addr3, ifmgd->bssid, ETH_ALEN);
+
+	return skb;
+}
+EXPORT_SYMBOL(ieee80211_nullfunc_get);
+
 void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       const void *frame, size_t frame_len,
 		       const struct ieee80211_tx_info *frame_txctl,
-- 
cgit v1.2.3


From 34a6eddbabd704b3c7dae9362234552267573be2 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <j@w1.fi>
Date: Wed, 6 Jan 2010 16:19:24 +0200
Subject: cfg80211: Store IEs from both Beacon and Probe Response frames

Store information elements from Beacon and Probe Response frames in
separate buffers to allow both sets to be made available through
nl80211. This allows user space applications to get access to IEs from
Beacon frames even if we have received Probe Response frames from the
BSS. Previously, the IEs from Probe Response frames would have
overridden the IEs from Beacon frames.

This feature is of somewhat limited use since most protocols include
the same (or extended) information in Probe Response frames. However,
there are couple of exceptions where the IEs from Beacon frames could
be of some use: TIM IE is only included in Beacon frames (and it would
be needed to figure out the DTIM period used in the BSS) and at least
some implementations of Wireless Provisioning Services seem to include
the full IE only in Beacon frames).

The new BSS attribute for scan results is added to allow both the IE
sets to be delivered. This is done in a way that maintains the
previously used behavior for applications that are not aware of the
new NL80211_BSS_BEACON_IES attribute.

Signed-off-by: Jouni Malinen <j@w1.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/nl80211.h |  10 +++-
 include/net/cfg80211.h  |  12 ++++-
 net/wireless/core.h     |   3 +-
 net/wireless/nl80211.c  |   4 ++
 net/wireless/scan.c     | 120 ++++++++++++++++++++++++++++++++++++------------
 5 files changed, 116 insertions(+), 33 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 7a1c8c145b22..127a73015760 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1378,13 +1378,20 @@ enum nl80211_channel_type {
  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- *	raw information elements from the probe response/beacon (bin)
+ *	raw information elements from the probe response/beacon (bin);
+ *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ *	from a Probe Response frame; otherwise they are from a Beacon frame.
+ *	However, if the driver does not indicate the source of the IEs, these
+ *	IEs may be from either frame subtype.
  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
  *	in mBm (100 * dBm) (s32)
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
  *	in unspecified units, scaled to 0..100 (u8)
  * @NL80211_BSS_STATUS: status, if this BSS is "used"
  * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
+ *	yet been received
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -1400,6 +1407,7 @@ enum nl80211_bss {
 	NL80211_BSS_SIGNAL_UNSPEC,
 	NL80211_BSS_STATUS,
 	NL80211_BSS_SEEN_MS_AGO,
+	NL80211_BSS_BEACON_IES,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0d734413b5fb..2af52704e670 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -626,8 +626,14 @@ enum cfg80211_signal_type {
  * @beacon_interval: the beacon interval as from the frame
  * @capability: the capability field in host byte order
  * @information_elements: the information elements (Note that there
- *	is no guarantee that these are well-formed!)
+ *	is no guarantee that these are well-formed!); this is a pointer to
+ *	either the beacon_ies or proberesp_ies depending on whether Probe
+ *	Response frame has been received
  * @len_information_elements: total length of the information elements
+ * @beacon_ies: the information elements from the last Beacon frame
+ * @len_beacon_ies: total length of the beacon_ies
+ * @proberesp_ies: the information elements from the last Probe Response frame
+ * @len_proberesp_ies: total length of the proberesp_ies
  * @signal: signal strength value (type depends on the wiphy's signal_type)
  * @free_priv: function pointer to free private data
  * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
@@ -641,6 +647,10 @@ struct cfg80211_bss {
 	u16 capability;
 	u8 *information_elements;
 	size_t len_information_elements;
+	u8 *beacon_ies;
+	size_t len_beacon_ies;
+	u8 *proberesp_ies;
+	size_t len_proberesp_ies;
 
 	s32 signal;
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 30ec95f05b52..2d6a6b9c0c43 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -111,7 +111,8 @@ struct cfg80211_internal_bss {
 	unsigned long ts;
 	struct kref ref;
 	atomic_t hold;
-	bool ies_allocated;
+	bool beacon_ies_allocated;
+	bool proberesp_ies_allocated;
 
 	/* must be last because of priv member */
 	struct cfg80211_bss pub;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b804062e0179..4af7991a9ec8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3163,6 +3163,10 @@ static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		NLA_PUT(msg, NL80211_BSS_INFORMATION_ELEMENTS,
 			res->len_information_elements,
 			res->information_elements);
+	if (res->beacon_ies && res->len_beacon_ies &&
+	    res->beacon_ies != res->information_elements)
+		NLA_PUT(msg, NL80211_BSS_BEACON_IES,
+			res->len_beacon_ies, res->beacon_ies);
 	if (res->tsf)
 		NLA_PUT_U64(msg, NL80211_BSS_TSF, res->tsf);
 	if (res->beacon_interval)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 0c2cbbebca95..06b0231ee5e3 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -100,8 +100,10 @@ static void bss_release(struct kref *ref)
 	if (bss->pub.free_priv)
 		bss->pub.free_priv(&bss->pub);
 
-	if (bss->ies_allocated)
-		kfree(bss->pub.information_elements);
+	if (bss->beacon_ies_allocated)
+		kfree(bss->pub.beacon_ies);
+	if (bss->proberesp_ies_allocated)
+		kfree(bss->pub.proberesp_ies);
 
 	BUG_ON(atomic_read(&bss->hold));
 
@@ -375,8 +377,7 @@ rb_find_bss(struct cfg80211_registered_device *dev,
 
 static struct cfg80211_internal_bss *
 cfg80211_bss_update(struct cfg80211_registered_device *dev,
-		    struct cfg80211_internal_bss *res,
-		    bool overwrite)
+		    struct cfg80211_internal_bss *res)
 {
 	struct cfg80211_internal_bss *found = NULL;
 	const u8 *meshid, *meshcfg;
@@ -418,28 +419,64 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 		found->pub.capability = res->pub.capability;
 		found->ts = res->ts;
 
-		/* overwrite IEs */
-		if (overwrite) {
+		/* Update IEs */
+		if (res->pub.proberesp_ies) {
 			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
-			size_t ielen = res->pub.len_information_elements;
+			size_t ielen = res->pub.len_proberesp_ies;
+
+			if (found->pub.proberesp_ies &&
+			    !found->proberesp_ies_allocated &&
+			    ksize(found) >= used + ielen) {
+				memcpy(found->pub.proberesp_ies,
+				       res->pub.proberesp_ies, ielen);
+				found->pub.len_proberesp_ies = ielen;
+			} else {
+				u8 *ies = found->pub.proberesp_ies;
+
+				if (found->proberesp_ies_allocated)
+					ies = krealloc(ies, ielen, GFP_ATOMIC);
+				else
+					ies = kmalloc(ielen, GFP_ATOMIC);
+
+				if (ies) {
+					memcpy(ies, res->pub.proberesp_ies,
+					       ielen);
+					found->proberesp_ies_allocated = true;
+					found->pub.proberesp_ies = ies;
+					found->pub.len_proberesp_ies = ielen;
+				}
+			}
 
-			if (!found->ies_allocated && ksize(found) >= used + ielen) {
-				memcpy(found->pub.information_elements,
-				       res->pub.information_elements, ielen);
-				found->pub.len_information_elements = ielen;
+			/* Override possible earlier Beacon frame IEs */
+			found->pub.information_elements =
+				found->pub.proberesp_ies;
+			found->pub.len_information_elements =
+				found->pub.len_proberesp_ies;
+		}
+		if (res->pub.beacon_ies) {
+			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
+			size_t ielen = res->pub.len_beacon_ies;
+
+			if (found->pub.beacon_ies &&
+			    !found->beacon_ies_allocated &&
+			    ksize(found) >= used + ielen) {
+				memcpy(found->pub.beacon_ies,
+				       res->pub.beacon_ies, ielen);
+				found->pub.len_beacon_ies = ielen;
 			} else {
-				u8 *ies = found->pub.information_elements;
+				u8 *ies = found->pub.beacon_ies;
 
-				if (found->ies_allocated)
+				if (found->beacon_ies_allocated)
 					ies = krealloc(ies, ielen, GFP_ATOMIC);
 				else
 					ies = kmalloc(ielen, GFP_ATOMIC);
 
 				if (ies) {
-					memcpy(ies, res->pub.information_elements, ielen);
-					found->ies_allocated = true;
-					found->pub.information_elements = ies;
-					found->pub.len_information_elements = ielen;
+					memcpy(ies, res->pub.beacon_ies,
+					       ielen);
+					found->beacon_ies_allocated = true;
+					found->pub.beacon_ies = ies;
+					found->pub.len_beacon_ies = ielen;
 				}
 			}
 		}
@@ -489,14 +526,26 @@ cfg80211_inform_bss(struct wiphy *wiphy,
 	res->pub.tsf = timestamp;
 	res->pub.beacon_interval = beacon_interval;
 	res->pub.capability = capability;
-	/* point to after the private area */
-	res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
-	memcpy(res->pub.information_elements, ie, ielen);
-	res->pub.len_information_elements = ielen;
+	/*
+	 * Since we do not know here whether the IEs are from a Beacon or Probe
+	 * Response frame, we need to pick one of the options and only use it
+	 * with the driver that does not provide the full Beacon/Probe Response
+	 * frame. Use Beacon frame pointer to avoid indicating that this should
+	 * override the information_elements pointer should we have received an
+	 * earlier indication of Probe Response data.
+	 *
+	 * The initial buffer for the IEs is allocated with the BSS entry and
+	 * is located after the private area.
+	 */
+	res->pub.beacon_ies = (u8 *)res + sizeof(*res) + privsz;
+	memcpy(res->pub.beacon_ies, ie, ielen);
+	res->pub.len_beacon_ies = ielen;
+	res->pub.information_elements = res->pub.beacon_ies;
+	res->pub.len_information_elements = res->pub.len_beacon_ies;
 
 	kref_init(&res->ref);
 
-	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, 0);
+	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res);
 	if (!res)
 		return NULL;
 
@@ -517,7 +566,6 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 	struct cfg80211_internal_bss *res;
 	size_t ielen = len - offsetof(struct ieee80211_mgmt,
 				      u.probe_resp.variable);
-	bool overwrite;
 	size_t privsz = wiphy->bss_priv_size;
 
 	if (WARN_ON(wiphy->signal_type == NL80211_BSS_SIGNAL_UNSPEC &&
@@ -538,16 +586,28 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 	res->pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
 	res->pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
 	res->pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
-	/* point to after the private area */
-	res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
-	memcpy(res->pub.information_elements, mgmt->u.probe_resp.variable, ielen);
-	res->pub.len_information_elements = ielen;
+	/*
+	 * The initial buffer for the IEs is allocated with the BSS entry and
+	 * is located after the private area.
+	 */
+	if (ieee80211_is_probe_resp(mgmt->frame_control)) {
+		res->pub.proberesp_ies = (u8 *) res + sizeof(*res) + privsz;
+		memcpy(res->pub.proberesp_ies, mgmt->u.probe_resp.variable,
+		       ielen);
+		res->pub.len_proberesp_ies = ielen;
+		res->pub.information_elements = res->pub.proberesp_ies;
+		res->pub.len_information_elements = res->pub.len_proberesp_ies;
+	} else {
+		res->pub.beacon_ies = (u8 *) res + sizeof(*res) + privsz;
+		memcpy(res->pub.beacon_ies, mgmt->u.beacon.variable, ielen);
+		res->pub.len_beacon_ies = ielen;
+		res->pub.information_elements = res->pub.beacon_ies;
+		res->pub.len_information_elements = res->pub.len_beacon_ies;
+	}
 
 	kref_init(&res->ref);
 
-	overwrite = ieee80211_is_probe_resp(mgmt->frame_control);
-
-	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, overwrite);
+	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res);
 	if (!res)
 		return NULL;
 
-- 
cgit v1.2.3


From ab13315af97919fae0e014748105fdc2e30afb2d Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 12 Jan 2010 10:42:31 +0200
Subject: mac80211: add U-APSD client support

Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The
idea is that the data frames from the client trigger AP to send the buffered
frames with ACs which have U-APSD enabled. This decreases latency and makes it
possible to save even more power.

Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current
implementation assumes that firmware takes care of the wakeup and
hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported.

Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running
various test traffic with ping.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h  | 18 ++++++++++++++++++
 include/net/mac80211.h     |  7 +++++++
 net/mac80211/cfg.c         |  7 +++++++
 net/mac80211/ieee80211_i.h | 13 ++++++++++++-
 net/mac80211/main.c        |  4 ++++
 net/mac80211/mlme.c        | 31 ++++++++++++++++++++++++++++---
 net/mac80211/scan.c        | 18 ++++++++++++++++++
 net/mac80211/util.c        |  2 ++
 net/mac80211/work.c        | 12 ++++++++++--
 9 files changed, 106 insertions(+), 6 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 602c0692c3fc..a8c6069a0d9f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -120,6 +120,24 @@
 #define IEEE80211_QOS_CTL_TID_MASK	0x000F
 #define IEEE80211_QOS_CTL_TAG1D_MASK	0x0007
 
+/* U-APSD queue for WMM IEs sent by AP */
+#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
+
+/* U-APSD queues for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO	(1<<0)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI	(1<<1)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK	(1<<2)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE	(1<<3)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK	0x0f
+
+/* U-APSD max SP length for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL	0x00
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2	0x01
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4	0x02
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT	5
+
 struct ieee80211_hdr {
 	__le16 frame_control;
 	__le16 duration_id;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e1e73c6abeff..f313a3cbabda 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -113,6 +113,7 @@ struct ieee80211_tx_queue_params {
 	u16 cw_min;
 	u16 cw_max;
 	u8 aifs;
+	bool uapsd;
 };
 
 /**
@@ -929,6 +930,11 @@ enum ieee80211_tkip_key_type {
  *	Hardware supports dynamic spatial multiplexing powersave,
  *	ie. can turn off all but one chain and then wake the rest
  *	up as required after, for example, rts/cts handshake.
+ *
+ * @IEEE80211_HW_SUPPORTS_UAPSD:
+ *	Hardware supports Unscheduled Automatic Power Save Delivery
+ *	(U-APSD) in managed mode. The mode is configured with
+ *	conf_tx() operation.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -948,6 +954,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_BEACON_FILTER			= 1<<14,
 	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
 	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
+	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index dc12e9466ffd..8286df5822d5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1128,6 +1128,13 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 	p.cw_max = params->cwmax;
 	p.cw_min = params->cwmin;
 	p.txop = params->txop;
+
+	/*
+	 * Setting tx queue params disables u-apsd because it's only
+	 * called in master mode.
+	 */
+	p.uapsd = false;
+
 	if (drv_conf_tx(local, params->queue, &p)) {
 		printk(KERN_DEBUG "%s: failed to set TX queue "
 		       "parameters for queue %d\n",
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 3e4ac3f30857..3468e378509a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -58,6 +58,15 @@ struct ieee80211_local;
 
 #define TU_TO_EXP_TIME(x)	(jiffies + usecs_to_jiffies((x) * 1024))
 
+#define IEEE80211_DEFAULT_UAPSD_QUEUES \
+	(IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |	\
+	 IEEE80211_WMM_IE_STA_QOSINFO_AC_BE |	\
+	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |	\
+	 IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+
+#define IEEE80211_DEFAULT_MAX_SP_LEN		\
+	IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
+
 struct ieee80211_fragment_entry {
 	unsigned long first_frag_time;
 	unsigned int seq;
@@ -78,6 +87,7 @@ struct ieee80211_bss {
 	u8 dtim_period;
 
 	bool wmm_used;
+	bool uapsd_supported;
 
 	unsigned long last_probe_resp;
 
@@ -285,7 +295,7 @@ struct ieee80211_work {
 			u8 ssid[IEEE80211_MAX_SSID_LEN];
 			u8 ssid_len;
 			u8 supp_rates_len;
-			bool wmm_used, use_11n;
+			bool wmm_used, use_11n, uapsd_used;
 		} assoc;
 		struct {
 			u32 duration;
@@ -306,6 +316,7 @@ enum ieee80211_sta_flags {
 	IEEE80211_STA_DISABLE_11N	= BIT(4),
 	IEEE80211_STA_CSA_RECEIVED	= BIT(5),
 	IEEE80211_STA_MFP_ENABLED	= BIT(6),
+	IEEE80211_STA_UAPSD_ENABLED	= BIT(7),
 };
 
 struct ieee80211_if_managed {
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 468829143991..0054bba08ce1 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -491,6 +491,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 
+	WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
+	     && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
+	     "U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
+
 	/*
 	 * Calculate scan IE length -- we need this to alloc
 	 * memory and to subtract from the driver limit. It
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 86f025bc9456..39c27d83a4f2 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -569,7 +569,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 	struct ieee80211_tx_queue_params params;
 	size_t left;
 	int count;
-	u8 *pos;
+	u8 *pos, uapsd_queues = 0;
 
 	if (local->hw.queues < 4)
 		return;
@@ -579,6 +579,10 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 
 	if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
 		return;
+
+	if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
+		uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
+
 	count = wmm_param[6] & 0x0f;
 	if (count == ifmgd->wmm_last_param_set)
 		return;
@@ -593,6 +597,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 	for (; left >= 4; left -= 4, pos += 4) {
 		int aci = (pos[0] >> 5) & 0x03;
 		int acm = (pos[0] >> 4) & 0x01;
+		bool uapsd = false;
 		int queue;
 
 		switch (aci) {
@@ -600,22 +605,30 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 			queue = 3;
 			if (acm)
 				local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+				uapsd = true;
 			break;
 		case 2: /* AC_VI */
 			queue = 1;
 			if (acm)
 				local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+				uapsd = true;
 			break;
 		case 3: /* AC_VO */
 			queue = 0;
 			if (acm)
 				local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+				uapsd = true;
 			break;
 		case 0: /* AC_BE */
 		default:
 			queue = 2;
 			if (acm)
 				local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
+			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+				uapsd = true;
 			break;
 		}
 
@@ -623,11 +636,14 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 		params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
 		params.cw_min = ecw2cw(pos[1] & 0x0f);
 		params.txop = get_unaligned_le16(pos + 2);
+		params.uapsd = uapsd;
+
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
-		       "cWmin=%d cWmax=%d txop=%d\n",
+		       "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
 		       wiphy_name(local->hw.wiphy), queue, aci, acm,
-		       params.aifs, params.cw_min, params.cw_max, params.txop);
+		       params.aifs, params.cw_min, params.cw_max, params.txop,
+		       params.uapsd);
 #endif
 		if (drv_conf_tx(local, queue, &params) && local->ops->conf_tx)
 			printk(KERN_DEBUG "%s: failed to set TX queue "
@@ -1906,6 +1922,15 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 	wk->assoc.ht_information_ie =
 		ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_INFORMATION);
 
+	if (bss->wmm_used && bss->uapsd_supported &&
+	    (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
+		wk->assoc.uapsd_used = true;
+		ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
+	} else {
+		wk->assoc.uapsd_used = false;
+		ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
+	}
+
 	ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
 	memcpy(wk->assoc.ssid, ssid + 2, ssid[1]);
 	wk->assoc.ssid_len = ssid[1];
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 30cb62bb45b3..9afe2f9885dc 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -54,6 +54,23 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local,
 	cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv));
 }
 
+static bool is_uapsd_supported(struct ieee802_11_elems *elems)
+{
+	u8 qos_info;
+
+	if (elems->wmm_info && elems->wmm_info_len == 7
+	    && elems->wmm_info[5] == 1)
+		qos_info = elems->wmm_info[6];
+	else if (elems->wmm_param && elems->wmm_param_len == 24
+		 && elems->wmm_param[5] == 1)
+		qos_info = elems->wmm_param[6];
+	else
+		/* no valid wmm information or parameter element found */
+		return false;
+
+	return qos_info & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD;
+}
+
 struct ieee80211_bss *
 ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_rx_status *rx_status,
@@ -117,6 +134,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 	}
 
 	bss->wmm_used = elems->wmm_param || elems->wmm_info;
+	bss->uapsd_supported = is_uapsd_supported(elems);
 
 	if (!beacon)
 		bss->last_probe_resp = jiffies;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index a2ba6e29bd9a..e278f97c8305 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -792,6 +792,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata)
 			break;
 		}
 
+		qparam.uapsd = false;
+
 		drv_conf_tx(local, queue, &qparam);
 	}
 }
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index 7c5d95b1bc04..a74fd6ee0083 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -202,7 +202,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
-	u8 *pos;
+	u8 *pos, qos_info;
 	const u8 *ies;
 	size_t offset = 0, noffset;
 	int i, len, count, rates_len, supp_rates_len;
@@ -375,6 +375,14 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (wk->assoc.wmm_used && local->hw.queues >= 4) {
+		if (wk->assoc.uapsd_used) {
+			qos_info = IEEE80211_DEFAULT_UAPSD_QUEUES;
+			qos_info |= (IEEE80211_DEFAULT_MAX_SP_LEN <<
+				     IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
+		} else {
+			qos_info = 0;
+		}
+
 		pos = skb_put(skb, 9);
 		*pos++ = WLAN_EID_VENDOR_SPECIFIC;
 		*pos++ = 7; /* len */
@@ -384,7 +392,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		*pos++ = 2; /* WME */
 		*pos++ = 0; /* WME info */
 		*pos++ = 1; /* WME ver */
-		*pos++ = 0;
+		*pos++ = qos_info;
 	}
 
 	/* add any remaining custom (i.e. vendor specific here) IEs */
-- 
cgit v1.2.3


From 558a6669d7cb407fbb0b5aec184b5c3b9a893d30 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@nokia.com>
Date: Tue, 12 Jan 2010 10:43:00 +0200
Subject: ieee80211: add struct ieee80211_hdr_qos

The header can be used to create qos nullfunc frames, for example.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/linux/ieee80211.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a8c6069a0d9f..842701906ae9 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -157,6 +157,16 @@ struct ieee80211_hdr_3addr {
 	__le16 seq_ctrl;
 } __attribute__ ((packed));
 
+struct ieee80211_qos_hdr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+	__le16 qos_ctrl;
+} __attribute__ ((packed));
+
 /**
  * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
  * @fc: frame control bytes in little-endian byteorder
-- 
cgit v1.2.3