From 49011e0c1555dd7a689d0f32fd78c1ecd43e59cd Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Mon, 14 Jun 2021 06:31:25 +0200 Subject: net: phy: micrel: ksz886x/ksz8081: add cabletest support This patch support for cable test for the ksz886x switches and the ksz8081 PHY. The patch was tested on a KSZ8873RLL switch with following results: - port 1: - provides invalid values, thus return -ENOTSUPP (Errata: DS80000830A: "LinkMD does not work on Port 1", http://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8873-Errata-DS80000830A.pdf) - port 2: - can detect distance - can detect open on each wire of pair A (wire 1 and 2) - can detect open only on one wire of pair B (only wire 3) - can detect short between wires of a pair (wires 1 + 2 or 3 + 6) - short between pairs is detected as open. For example short between wires 2 + 3 is detected as open. Signed-off-by: Oleksij Rempel Signed-off-by: David S. Miller --- include/linux/micrel_phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 58370abd9f4f..3d43c60b49fa 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -39,6 +39,7 @@ /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_FXEN 0x00000002 +#define MICREL_KSZ8_P1_ERRATA 0x00000003 #define MICREL_KSZ9021_EXTREG_CTRL 0xB #define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC -- cgit v1.2.3