From f360d88a2efddf2d2a2d01a8ac76fded34d624b4 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 2 Apr 2014 00:10:16 +0300 Subject: IB/mlx5: Add block multicast loopback support Add support for the block multicast loopback QP creation flag along the proper firmware API for that. Signed-off-by: Eli Cohen Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- include/linux/mlx5/device.h | 1 + include/linux/mlx5/qp.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 407bdb67fd4f..3406cfb1267a 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -179,6 +179,7 @@ enum { MLX5_DEV_CAP_FLAG_BAD_QKEY_CNTR = 1LL << 9, MLX5_DEV_CAP_FLAG_APM = 1LL << 17, MLX5_DEV_CAP_FLAG_ATOMIC = 1LL << 18, + MLX5_DEV_CAP_FLAG_BLOCK_MCAST = 1LL << 23, MLX5_DEV_CAP_FLAG_ON_DMND_PG = 1LL << 24, MLX5_DEV_CAP_FLAG_CQ_MODER = 1LL << 29, MLX5_DEV_CAP_FLAG_RESIZE_CQ = 1LL << 30, diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h index f829ad80ff28..9709b30e2d69 100644 --- a/include/linux/mlx5/qp.h +++ b/include/linux/mlx5/qp.h @@ -146,6 +146,7 @@ enum { enum { MLX5_QP_LAT_SENSITIVE = 1 << 28, + MLX5_QP_BLOCK_MCAST = 1 << 30, MLX5_QP_ENABLE_SIG = 1 << 31, }; -- cgit v1.2.3 From b9d12085f2f531fdea67f0361564e0812696227c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 15 Apr 2014 15:50:19 +0200 Subject: net: phy: add minimal support for QSGMII PHY This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/ethernet.txt | 2 +- include/linux/phy.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 9ecd43d8792c..3fc360523bc9 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers: - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). - phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", + "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto standard property; - phy-connection-type: the same as "phy-mode" property but described in ePAPR; diff --git a/include/linux/phy.h b/include/linux/phy.h index 24126c4b27b5..4d0221fd0688 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -75,6 +75,7 @@ typedef enum { PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -116,6 +117,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "xgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; + case PHY_INTERFACE_MODE_QSGMII: + return "qsgmii"; default: return "unknown"; } -- cgit v1.2.3 From 33ac1257ff0dee2e9c7f009b1c1914b7990217b2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Jan 2014 08:57:31 -0500 Subject: sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner() All device_schedule_callback_owner() users are converted to use device_remove_file_self(). Remove now unused {sysfs|device}_schedule_callback_owner(). Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 33 ------------------ fs/sysfs/file.c | 92 -------------------------------------------------- include/linux/device.h | 11 +----- include/linux/sysfs.h | 9 ----- 4 files changed, 1 insertion(+), 144 deletions(-) (limited to 'include/linux') diff --git a/drivers/base/core.c b/drivers/base/core.c index 0dd65281cc65..20da3ad1696b 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -614,39 +614,6 @@ void device_remove_bin_file(struct device *dev, } EXPORT_SYMBOL_GPL(device_remove_bin_file); -/** - * device_schedule_callback_owner - helper to schedule a callback for a device - * @dev: device. - * @func: callback function to invoke later. - * @owner: module owning the callback routine - * - * Attribute methods must not unregister themselves or their parent device - * (which would amount to the same thing). Attempts to do so will deadlock, - * since unregistration is mutually exclusive with driver callbacks. - * - * Instead methods can call this routine, which will attempt to allocate - * and schedule a workqueue request to call back @func with @dev as its - * argument in the workqueue's process context. @dev will be pinned until - * @func returns. - * - * This routine is usually called via the inline device_schedule_callback(), - * which automatically sets @owner to THIS_MODULE. - * - * Returns 0 if the request was submitted, -ENOMEM if storage could not - * be allocated, -ENODEV if a reference to @owner isn't available. - * - * NOTE: This routine won't work if CONFIG_SYSFS isn't set! It uses an - * underlying sysfs routine (since it is intended for use by attribute - * methods), and if sysfs isn't available you'll get nothing but -ENOSYS. - */ -int device_schedule_callback_owner(struct device *dev, - void (*func)(struct device *), struct module *owner) -{ - return sysfs_schedule_callback(&dev->kobj, - (void (*)(void *)) func, dev, owner); -} -EXPORT_SYMBOL_GPL(device_schedule_callback_owner); - static void klist_children_get(struct klist_node *n) { struct device_private *p = to_device_private_parent(n); diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 1b8b91b67fdb..28cc1acd5439 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -453,95 +453,3 @@ void sysfs_remove_bin_file(struct kobject *kobj, kernfs_remove_by_name(kobj->sd, attr->attr.name); } EXPORT_SYMBOL_GPL(sysfs_remove_bin_file); - -struct sysfs_schedule_callback_struct { - struct list_head workq_list; - struct kobject *kobj; - void (*func)(void *); - void *data; - struct module *owner; - struct work_struct work; -}; - -static struct workqueue_struct *sysfs_workqueue; -static DEFINE_MUTEX(sysfs_workq_mutex); -static LIST_HEAD(sysfs_workq); -static void sysfs_schedule_callback_work(struct work_struct *work) -{ - struct sysfs_schedule_callback_struct *ss = container_of(work, - struct sysfs_schedule_callback_struct, work); - - (ss->func)(ss->data); - kobject_put(ss->kobj); - module_put(ss->owner); - mutex_lock(&sysfs_workq_mutex); - list_del(&ss->workq_list); - mutex_unlock(&sysfs_workq_mutex); - kfree(ss); -} - -/** - * sysfs_schedule_callback - helper to schedule a callback for a kobject - * @kobj: object we're acting for. - * @func: callback function to invoke later. - * @data: argument to pass to @func. - * @owner: module owning the callback code - * - * sysfs attribute methods must not unregister themselves or their parent - * kobject (which would amount to the same thing). Attempts to do so will - * deadlock, since unregistration is mutually exclusive with driver - * callbacks. - * - * Instead methods can call this routine, which will attempt to allocate - * and schedule a workqueue request to call back @func with @data as its - * argument in the workqueue's process context. @kobj will be pinned - * until @func returns. - * - * Returns 0 if the request was submitted, -ENOMEM if storage could not - * be allocated, -ENODEV if a reference to @owner isn't available, - * -EAGAIN if a callback has already been scheduled for @kobj. - */ -int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), - void *data, struct module *owner) -{ - struct sysfs_schedule_callback_struct *ss, *tmp; - - if (!try_module_get(owner)) - return -ENODEV; - - mutex_lock(&sysfs_workq_mutex); - list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list) - if (ss->kobj == kobj) { - module_put(owner); - mutex_unlock(&sysfs_workq_mutex); - return -EAGAIN; - } - mutex_unlock(&sysfs_workq_mutex); - - if (sysfs_workqueue == NULL) { - sysfs_workqueue = create_singlethread_workqueue("sysfsd"); - if (sysfs_workqueue == NULL) { - module_put(owner); - return -ENOMEM; - } - } - - ss = kmalloc(sizeof(*ss), GFP_KERNEL); - if (!ss) { - module_put(owner); - return -ENOMEM; - } - kobject_get(kobj); - ss->kobj = kobj; - ss->func = func; - ss->data = data; - ss->owner = owner; - INIT_WORK(&ss->work, sysfs_schedule_callback_work); - INIT_LIST_HEAD(&ss->workq_list); - mutex_lock(&sysfs_workq_mutex); - list_add_tail(&ss->workq_list, &sysfs_workq); - mutex_unlock(&sysfs_workq_mutex); - queue_work(sysfs_workqueue, &ss->work); - return 0; -} -EXPORT_SYMBOL_GPL(sysfs_schedule_callback); diff --git a/include/linux/device.h b/include/linux/device.h index 233bbbeb768d..d1d1c055b48e 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -566,12 +566,6 @@ extern int __must_check device_create_bin_file(struct device *dev, const struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, const struct bin_attribute *attr); -extern int device_schedule_callback_owner(struct device *dev, - void (*func)(struct device *dev), struct module *owner); - -/* This is a macro to avoid include problems with THIS_MODULE */ -#define device_schedule_callback(dev, func) \ - device_schedule_callback_owner(dev, func, THIS_MODULE) /* device resource management */ typedef void (*dr_release_t)(struct device *dev, void *res); @@ -932,10 +926,7 @@ extern int device_online(struct device *dev); extern struct device *__root_device_register(const char *name, struct module *owner); -/* - * This is a macro to avoid include problems with THIS_MODULE, - * just as per what is done for device_schedule_callback() above. - */ +/* This is a macro to avoid include problems with THIS_MODULE */ #define root_device_register(name) \ __root_device_register(name, THIS_MODULE) diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 084354b0e814..5ffaa3443712 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -179,9 +179,6 @@ struct sysfs_ops { #ifdef CONFIG_SYSFS -int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), - void *data, struct module *owner); - int __must_check sysfs_create_dir_ns(struct kobject *kobj, const void *ns); void sysfs_remove_dir(struct kobject *kobj); int __must_check sysfs_rename_dir_ns(struct kobject *kobj, const char *new_name, @@ -255,12 +252,6 @@ static inline void sysfs_enable_ns(struct kernfs_node *kn) #else /* CONFIG_SYSFS */ -static inline int sysfs_schedule_callback(struct kobject *kobj, - void (*func)(void *), void *data, struct module *owner) -{ - return -ENOSYS; -} - static inline int sysfs_create_dir_ns(struct kobject *kobj, const void *ns) { return 0; -- cgit v1.2.3 From 1d2514818a2c3d94dd250e6027cb928a4e192548 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 15 Apr 2014 19:16:41 -0700 Subject: net: mdio-gpio: Add support for active low gpio pins Some systems using mdio-gpio may use active-low gpio pins (eg with inverters or FETs connected to all or some of the gpio pins). Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 19 +++++++++++++------ include/linux/mdio-gpio.h | 3 +++ 2 files changed, 16 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index e853066c805a..fac211a5001e 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -33,28 +33,32 @@ struct mdio_gpio_info { struct mdiobb_ctrl ctrl; int mdc, mdio; + int mdc_active_low, mdio_active_low; }; static void *mdio_gpio_of_get_data(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct mdio_gpio_platform_data *pdata; + enum of_gpio_flags flags; int ret; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; - ret = of_get_gpio(np, 0); + ret = of_get_gpio_flags(np, 0, &flags); if (ret < 0) return NULL; pdata->mdc = ret; + pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW; - ret = of_get_gpio(np, 1); + ret = of_get_gpio_flags(np, 1, &flags); if (ret < 0) return NULL; pdata->mdio = ret; + pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW; return pdata; } @@ -65,7 +69,8 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) container_of(ctrl, struct mdio_gpio_info, ctrl); if (dir) - gpio_direction_output(bitbang->mdio, 1); + gpio_direction_output(bitbang->mdio, + 1 ^ bitbang->mdio_active_low); else gpio_direction_input(bitbang->mdio); } @@ -75,7 +80,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - return gpio_get_value(bitbang->mdio); + return gpio_get_value(bitbang->mdio) ^ bitbang->mdio_active_low; } static void mdio_set(struct mdiobb_ctrl *ctrl, int what) @@ -83,7 +88,7 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpio_set_value(bitbang->mdio, what); + gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -91,7 +96,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpio_set_value(bitbang->mdc, what); + gpio_set_value(bitbang->mdc, what ^ bitbang->mdc_active_low); } static struct mdiobb_ops mdio_gpio_ops = { @@ -117,7 +122,9 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, bitbang->ctrl.ops = &mdio_gpio_ops; bitbang->ctrl.reset = pdata->reset; bitbang->mdc = pdata->mdc; + bitbang->mdc_active_low = pdata->mdc_active_low; bitbang->mdio = pdata->mdio; + bitbang->mdio_active_low = pdata->mdio_active_low; new_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!new_bus) diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h index 7c9fe3c2be73..57e57fe6055c 100644 --- a/include/linux/mdio-gpio.h +++ b/include/linux/mdio-gpio.h @@ -18,6 +18,9 @@ struct mdio_gpio_platform_data { unsigned int mdc; unsigned int mdio; + bool mdc_active_low; + bool mdio_active_low; + unsigned int phy_mask; int irqs[PHY_MAX_ADDR]; /* reset callback */ -- cgit v1.2.3 From f1d54c47502f42f5c4b89dacbe845ecd87ca002e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 15 Apr 2014 19:16:42 -0700 Subject: net: mdio-gpio: Add support for separate MDI and MDO gpio pins This is for a system with fixed assignments of input and output pins (various variants of Kontron COMe). Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 34 +++++++++++++++++++++++++++++++--- include/linux/mdio-gpio.h | 2 ++ 2 files changed, 33 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index fac211a5001e..9c4defdec67b 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -32,8 +32,8 @@ struct mdio_gpio_info { struct mdiobb_ctrl ctrl; - int mdc, mdio; - int mdc_active_low, mdio_active_low; + int mdc, mdio, mdo; + int mdc_active_low, mdio_active_low, mdo_active_low; }; static void *mdio_gpio_of_get_data(struct platform_device *pdev) @@ -60,6 +60,12 @@ static void *mdio_gpio_of_get_data(struct platform_device *pdev) pdata->mdio = ret; pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW; + ret = of_get_gpio_flags(np, 2, &flags); + if (ret > 0) { + pdata->mdo = ret; + pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW; + } + return pdata; } @@ -68,6 +74,16 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); + if (bitbang->mdo) { + /* Separate output pin. Always set its value to high + * when changing direction. If direction is input, + * assume the pin serves as pull-up. If direction is + * output, the default value is high. + */ + gpio_set_value(bitbang->mdo, 1 ^ bitbang->mdo_active_low); + return; + } + if (dir) gpio_direction_output(bitbang->mdio, 1 ^ bitbang->mdio_active_low); @@ -88,7 +104,10 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low); + if (bitbang->mdo) + gpio_set_value(bitbang->mdo, what ^ bitbang->mdo_active_low); + else + gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -125,6 +144,8 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, bitbang->mdc_active_low = pdata->mdc_active_low; bitbang->mdio = pdata->mdio; bitbang->mdio_active_low = pdata->mdio_active_low; + bitbang->mdo = pdata->mdo; + bitbang->mdo_active_low = pdata->mdo_active_low; new_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!new_bus) @@ -151,6 +172,13 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, if (devm_gpio_request(dev, bitbang->mdio, "mdio")) goto out_free_bus; + if (bitbang->mdo) { + if (devm_gpio_request(dev, bitbang->mdo, "mdo")) + goto out_free_bus; + gpio_direction_output(bitbang->mdo, 1); + gpio_direction_input(bitbang->mdio); + } + gpio_direction_output(bitbang->mdc, 0); dev_set_drvdata(dev, new_bus); diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h index 57e57fe6055c..66c30a763b10 100644 --- a/include/linux/mdio-gpio.h +++ b/include/linux/mdio-gpio.h @@ -17,9 +17,11 @@ struct mdio_gpio_platform_data { /* GPIO numbers for bus pins */ unsigned int mdc; unsigned int mdio; + unsigned int mdo; bool mdc_active_low; bool mdio_active_low; + bool mdo_active_low; unsigned int phy_mask; int irqs[PHY_MAX_ADDR]; -- cgit v1.2.3 From 03367ef5ea811475187a0732aada068919e14d61 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 3 Apr 2014 18:02:45 -0700 Subject: Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the VMBUS protocol. Signed-off-by: K. Y. Srinivasan Cc: [3.9+] Signed-off-by: Greg Kroah-Hartman --- drivers/hv/connection.c | 5 ++++- include/linux/hyperv.h | 4 +++- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index f2d7bf90c9fe..2e7801af466e 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -55,6 +55,9 @@ static __u32 vmbus_get_next_version(__u32 current_version) case (VERSION_WIN8): return VERSION_WIN7; + case (VERSION_WIN8_1): + return VERSION_WIN8; + case (VERSION_WS2008): default: return VERSION_INVAL; @@ -77,7 +80,7 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, msg->interrupt_page = virt_to_phys(vmbus_connection.int_page); msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]); msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]); - if (version == VERSION_WIN8) + if (version == VERSION_WIN8_1) msg->target_vcpu = hv_context.vp_index[smp_processor_id()]; /* diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index ab7359fde987..2d7b4f139c32 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -147,15 +147,17 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, * 0 . 13 (Windows Server 2008) * 1 . 1 (Windows 7) * 2 . 4 (Windows 8) + * 3 . 0 (Windows 8 R2) */ #define VERSION_WS2008 ((0 << 16) | (13)) #define VERSION_WIN7 ((1 << 16) | (1)) #define VERSION_WIN8 ((2 << 16) | (4)) +#define VERSION_WIN8_1 ((3 << 16) | (0)) #define VERSION_INVAL -1 -#define VERSION_CURRENT VERSION_WIN8 +#define VERSION_CURRENT VERSION_WIN8_1 /* Make maximum size of pipe payload of 16K */ #define MAX_PIPE_DATA_PAYLOAD (sizeof(u8) * 16384) -- cgit v1.2.3 From 89986496de141213206d49450ffdd36098d41209 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Mon, 14 Apr 2014 09:46:54 -0500 Subject: ipmi: Turn off all activity on an idle ipmi interface The IPMI driver would wake up periodically looking for events and watchdog pretimeouts. If there is nothing waiting for these events, it's really kind of pointless to be checking for them. So modify the driver so the message handler can pass down if it needs the lower layer to be waiting for these. Modify the system interface lower layer to turn off all timer and thread activity if the upper layer doesn't need anything and it is not currently handling messages. And modify the message handler to not restart the timer if its timer is not needed. The timers and kthread will still be enabled if: - the SI interface is handling a message. - a user has enabled watching for events. - the IPMI watchdog timer is in use (since it uses pretimeouts). - the message handler is waiting on a remote response. - a user has registered to receive commands. This mostly affects interfaces without interrupts. Interfaces with interrupts already don't use CPU in the system interface when the interface is idle. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 219 ++++++++++++++++++++++-------------- drivers/char/ipmi/ipmi_si_intf.c | 51 +++++++-- include/linux/ipmi.h | 2 +- include/linux/ipmi_smi.h | 7 ++ 4 files changed, 182 insertions(+), 97 deletions(-) (limited to 'include/linux') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index ec4e10fcf1a5..872c4ec79bf4 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -55,6 +55,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); static void smi_recv_tasklet(unsigned long); static void handle_new_recv_msgs(ipmi_smi_t intf); +static void need_waiter(ipmi_smi_t intf); static int initialized; @@ -73,6 +74,20 @@ static struct proc_dir_entry *proc_ipmi_root; */ #define MAX_MSG_TIMEOUT 60000 +/* Call every ~1000 ms. */ +#define IPMI_TIMEOUT_TIME 1000 + +/* How many jiffies does it take to get to the timeout time. */ +#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) + +/* + * Request events from the queue every second (this is the number of + * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the + * future, IPMI will add a way to know immediately if an event is in + * the queue and this silliness can go away. + */ +#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) + /* * The main "user" data structure. */ @@ -92,7 +107,7 @@ struct ipmi_user { ipmi_smi_t intf; /* Does this interface receive IPMI events? */ - int gets_events; + bool gets_events; }; struct cmd_rcvr { @@ -383,6 +398,9 @@ struct ipmi_smi { unsigned int waiting_events_count; /* How many events in queue? */ char delivering_events; char event_msg_printed; + atomic_t event_waiters; + unsigned int ticks_to_req_ev; + int last_needs_timer; /* * The event receiver for my BMC, only really used at panic @@ -451,7 +469,6 @@ static DEFINE_MUTEX(ipmi_interfaces_mutex); static LIST_HEAD(smi_watchers); static DEFINE_MUTEX(smi_watchers_mutex); - #define ipmi_inc_stat(intf, stat) \ atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat]) #define ipmi_get_stat(intf, stat) \ @@ -772,6 +789,7 @@ static int intf_next_seq(ipmi_smi_t intf, *seq = i; *seqid = intf->seq_table[i].seqid; intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; + need_waiter(intf); } else { rv = -EAGAIN; } @@ -941,7 +959,7 @@ int ipmi_create_user(unsigned int if_num, new_user->handler = handler; new_user->handler_data = handler_data; new_user->intf = intf; - new_user->gets_events = 0; + new_user->gets_events = false; if (!try_module_get(intf->handlers->owner)) { rv = -ENODEV; @@ -966,6 +984,11 @@ int ipmi_create_user(unsigned int if_num, spin_lock_irqsave(&intf->seq_lock, flags); list_add_rcu(&new_user->link, &intf->users); spin_unlock_irqrestore(&intf->seq_lock, flags); + if (handler->ipmi_watchdog_pretimeout) { + /* User wants pretimeouts, so make sure to watch for them. */ + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } *user = new_user; return 0; @@ -1021,6 +1044,12 @@ int ipmi_destroy_user(ipmi_user_t user) user->valid = 0; + if (user->handler->ipmi_watchdog_pretimeout) + atomic_dec(&intf->event_waiters); + + if (user->gets_events) + atomic_dec(&intf->event_waiters); + /* Remove the user from the interface's sequence table. */ spin_lock_irqsave(&intf->seq_lock, flags); list_del_rcu(&user->link); @@ -1184,7 +1213,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) } EXPORT_SYMBOL(ipmi_set_maintenance_mode); -int ipmi_set_gets_events(ipmi_user_t user, int val) +int ipmi_set_gets_events(ipmi_user_t user, bool val) { unsigned long flags; ipmi_smi_t intf = user->intf; @@ -1194,8 +1223,18 @@ int ipmi_set_gets_events(ipmi_user_t user, int val) INIT_LIST_HEAD(&msgs); spin_lock_irqsave(&intf->events_lock, flags); + if (user->gets_events == val) + goto out; + user->gets_events = val; + if (val) { + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } else { + atomic_dec(&intf->event_waiters); + } + if (intf->delivering_events) /* * Another thread is delivering events for this, so @@ -1289,6 +1328,9 @@ int ipmi_register_for_cmd(ipmi_user_t user, goto out_unlock; } + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); out_unlock: @@ -1330,6 +1372,7 @@ int ipmi_unregister_for_cmd(ipmi_user_t user, mutex_unlock(&intf->cmd_rcvrs_mutex); synchronize_rcu(); while (rcvrs) { + atomic_dec(&intf->event_waiters); rcvr = rcvrs; rcvrs = rcvr->next; kfree(rcvr); @@ -2876,6 +2919,8 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, (unsigned long) intf); atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0); spin_lock_init(&intf->events_lock); + atomic_set(&intf->event_waiters, 0); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; INIT_LIST_HEAD(&intf->waiting_events); intf->waiting_events_count = 0; mutex_init(&intf->cmd_rcvrs_mutex); @@ -3965,7 +4010,8 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, struct list_head *timeouts, long timeout_period, - int slot, unsigned long *flags) + int slot, unsigned long *flags, + unsigned int *waiting_msgs) { struct ipmi_recv_msg *msg; struct ipmi_smi_handlers *handlers; @@ -3977,8 +4023,10 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, return; ent->timeout -= timeout_period; - if (ent->timeout > 0) + if (ent->timeout > 0) { + (*waiting_msgs)++; return; + } if (ent->retries_left == 0) { /* The message has used all its retries. */ @@ -3995,6 +4043,8 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, struct ipmi_smi_msg *smi_msg; /* More retries, send again. */ + (*waiting_msgs)++; + /* * Start with the max timer, set to normal timer after * the message is sent. @@ -4040,117 +4090,118 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, } } -static void ipmi_timeout_handler(long timeout_period) +static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period) { - ipmi_smi_t intf; struct list_head timeouts; struct ipmi_recv_msg *msg, *msg2; unsigned long flags; int i; + unsigned int waiting_msgs = 0; - rcu_read_lock(); - list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { - tasklet_schedule(&intf->recv_tasklet); - - /* - * Go through the seq table and find any messages that - * have timed out, putting them in the timeouts - * list. - */ - INIT_LIST_HEAD(&timeouts); - spin_lock_irqsave(&intf->seq_lock, flags); - for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) - check_msg_timeout(intf, &(intf->seq_table[i]), - &timeouts, timeout_period, i, - &flags); - spin_unlock_irqrestore(&intf->seq_lock, flags); + /* + * Go through the seq table and find any messages that + * have timed out, putting them in the timeouts + * list. + */ + INIT_LIST_HEAD(&timeouts); + spin_lock_irqsave(&intf->seq_lock, flags); + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) + check_msg_timeout(intf, &(intf->seq_table[i]), + &timeouts, timeout_period, i, + &flags, &waiting_msgs); + spin_unlock_irqrestore(&intf->seq_lock, flags); - list_for_each_entry_safe(msg, msg2, &timeouts, link) - deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); + list_for_each_entry_safe(msg, msg2, &timeouts, link) + deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); - /* - * Maintenance mode handling. Check the timeout - * optimistically before we claim the lock. It may - * mean a timeout gets missed occasionally, but that - * only means the timeout gets extended by one period - * in that case. No big deal, and it avoids the lock - * most of the time. - */ + /* + * Maintenance mode handling. Check the timeout + * optimistically before we claim the lock. It may + * mean a timeout gets missed occasionally, but that + * only means the timeout gets extended by one period + * in that case. No big deal, and it avoids the lock + * most of the time. + */ + if (intf->auto_maintenance_timeout > 0) { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); if (intf->auto_maintenance_timeout > 0) { - spin_lock_irqsave(&intf->maintenance_mode_lock, flags); - if (intf->auto_maintenance_timeout > 0) { - intf->auto_maintenance_timeout - -= timeout_period; - if (!intf->maintenance_mode - && (intf->auto_maintenance_timeout <= 0)) { - intf->maintenance_mode_enable = 0; - maintenance_mode_update(intf); - } + intf->auto_maintenance_timeout + -= timeout_period; + if (!intf->maintenance_mode + && (intf->auto_maintenance_timeout <= 0)) { + intf->maintenance_mode_enable = 0; + maintenance_mode_update(intf); } - spin_unlock_irqrestore(&intf->maintenance_mode_lock, - flags); } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); } - rcu_read_unlock(); + + tasklet_schedule(&intf->recv_tasklet); + + return waiting_msgs; } -static void ipmi_request_event(void) +static void ipmi_request_event(ipmi_smi_t intf) { - ipmi_smi_t intf; struct ipmi_smi_handlers *handlers; - rcu_read_lock(); - /* - * Called from the timer, no need to check if handlers is - * valid. - */ - list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { - /* No event requests when in maintenance mode. */ - if (intf->maintenance_mode_enable) - continue; + /* No event requests when in maintenance mode. */ + if (intf->maintenance_mode_enable) + return; - handlers = intf->handlers; - if (handlers) - handlers->request_events(intf->send_info); - } - rcu_read_unlock(); + handlers = intf->handlers; + if (handlers) + handlers->request_events(intf->send_info); } static struct timer_list ipmi_timer; -/* Call every ~1000 ms. */ -#define IPMI_TIMEOUT_TIME 1000 - -/* How many jiffies does it take to get to the timeout time. */ -#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) - -/* - * Request events from the queue every second (this is the number of - * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the - * future, IPMI will add a way to know immediately if an event is in - * the queue and this silliness can go away. - */ -#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) - static atomic_t stop_operation; -static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; static void ipmi_timeout(unsigned long data) { + ipmi_smi_t intf; + int nt = 0; + if (atomic_read(&stop_operation)) return; - ticks_to_req_ev--; - if (ticks_to_req_ev == 0) { - ipmi_request_event(); - ticks_to_req_ev = IPMI_REQUEST_EV_TIME; - } + rcu_read_lock(); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + int lnt = 0; + + if (atomic_read(&intf->event_waiters)) { + intf->ticks_to_req_ev--; + if (intf->ticks_to_req_ev == 0) { + ipmi_request_event(intf); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + } + lnt++; + } - ipmi_timeout_handler(IPMI_TIMEOUT_TIME); + lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME); - mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); + lnt = !!lnt; + if (lnt != intf->last_needs_timer && + intf->handlers->set_need_watch) + intf->handlers->set_need_watch(intf->send_info, lnt); + intf->last_needs_timer = lnt; + + nt += lnt; + } + rcu_read_unlock(); + + if (nt) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); } +static void need_waiter(ipmi_smi_t intf) +{ + /* Racy, but worst case we start the timer twice. */ + if (!timer_pending(&ipmi_timer)) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); +} static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 25a1436a4291..444ea548dfe3 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -257,6 +257,9 @@ struct smi_info { /* Used to gracefully stop the timer without race conditions. */ atomic_t stop_operation; + /* Are we waiting for the events, pretimeouts, received msgs? */ + atomic_t need_watch; + /* * The driver will disable interrupts when it gets into a * situation where it cannot handle messages due to lack of @@ -862,6 +865,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, return si_sm_result; } +static void check_start_timer_thread(struct smi_info *smi_info) +{ + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); + + if (smi_info->thread) + wake_up_process(smi_info->thread); + + start_next_msg(smi_info); + smi_event_handler(smi_info, 0); + } +} + static void sender(void *send_info, struct ipmi_smi_msg *msg, int priority) @@ -915,15 +931,7 @@ static void sender(void *send_info, else list_add_tail(&msg->link, &smi_info->xmit_msgs); - if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { - smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); - - if (smi_info->thread) - wake_up_process(smi_info->thread); - - start_next_msg(smi_info); - smi_event_handler(smi_info, 0); - } + check_start_timer_thread(smi_info); spin_unlock_irqrestore(&smi_info->si_lock, flags); } @@ -1023,9 +1031,15 @@ static int ipmi_thread(void *data) ; /* do nothing */ else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) schedule(); - else if (smi_result == SI_SM_IDLE) - schedule_timeout_interruptible(100); - else + else if (smi_result == SI_SM_IDLE) { + if (atomic_read(&smi_info->need_watch)) { + schedule_timeout_interruptible(100); + } else { + /* Wait to be woken up when we are needed. */ + __set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + } else schedule_timeout_interruptible(1); } return 0; @@ -1061,6 +1075,17 @@ static void request_events(void *send_info) atomic_set(&smi_info->req_events, 1); } +static void set_need_watch(void *send_info, int enable) +{ + struct smi_info *smi_info = send_info; + unsigned long flags; + + atomic_set(&smi_info->need_watch, enable); + spin_lock_irqsave(&smi_info->si_lock, flags); + check_start_timer_thread(smi_info); + spin_unlock_irqrestore(&smi_info->si_lock, flags); +} + static int initialized; static void smi_timeout(unsigned long data) @@ -1212,6 +1237,7 @@ static struct ipmi_smi_handlers handlers = { .get_smi_info = get_smi_info, .sender = sender, .request_events = request_events, + .set_need_watch = set_need_watch, .set_maintenance_mode = set_maintenance_mode, .set_run_to_completion = set_run_to_completion, .poll = poll, @@ -3352,6 +3378,7 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->interrupt_disabled = 1; atomic_set(&new_smi->stop_operation, 0); + atomic_set(&new_smi->need_watch, 0); new_smi->intf_num = smi_num; smi_num++; diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 1f9f56e28851..76d2acbfa7c6 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -237,7 +237,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode); * The first user that sets this to TRUE will receive all events that * have been queued while no one was waiting for events. */ -int ipmi_set_gets_events(ipmi_user_t user, int val); +int ipmi_set_gets_events(ipmi_user_t user, bool val); /* * Called when a new SMI is registered. This will also be called on diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 8ea3fe0b9759..2a7ff302d990 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -109,6 +109,13 @@ struct ipmi_smi_handlers { events from the BMC we are attached to. */ void (*request_events)(void *send_info); + /* Called by the upper layer when some user requires that the + interface watch for events, received messages, watchdog + pretimeouts, or not. Used by the SMI to know if it should + watch for these. This may be NULL if the SMI does not + implement it. */ + void (*set_need_watch)(void *send_info, int enable); + /* Called when the interface should go into "run to completion" mode. If this call sets the value to true, the interface should make sure that all messages are flushed -- cgit v1.2.3 From 7aefac26fc67158cb8826a5f5bfc2a5086a7d962 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Mon, 14 Apr 2014 09:46:56 -0500 Subject: ipmi: boolify some things Convert some ints to bools. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 22 ++++++++-------- drivers/char/ipmi/ipmi_si_intf.c | 50 ++++++++++++++++++------------------- include/linux/ipmi_smi.h | 6 ++--- 3 files changed, 38 insertions(+), 40 deletions(-) (limited to 'include/linux') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 872c4ec79bf4..e6db9381b2c7 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -94,8 +94,8 @@ static struct proc_dir_entry *proc_ipmi_root; struct ipmi_user { struct list_head link; - /* Set to "0" when the user is destroyed. */ - int valid; + /* Set to false when the user is destroyed. */ + bool valid; struct kref refcount; @@ -413,7 +413,7 @@ struct ipmi_smi { /* For handling of maintenance mode. */ int maintenance_mode; - int maintenance_mode_enable; + bool maintenance_mode_enable; int auto_maintenance_timeout; spinlock_t maintenance_mode_lock; /* Used in a timer... */ @@ -980,7 +980,7 @@ int ipmi_create_user(unsigned int if_num, */ mutex_unlock(&ipmi_interfaces_mutex); - new_user->valid = 1; + new_user->valid = true; spin_lock_irqsave(&intf->seq_lock, flags); list_add_rcu(&new_user->link, &intf->users); spin_unlock_irqrestore(&intf->seq_lock, flags); @@ -1042,7 +1042,7 @@ int ipmi_destroy_user(ipmi_user_t user) struct cmd_rcvr *rcvr; struct cmd_rcvr *rcvrs = NULL; - user->valid = 0; + user->valid = false; if (user->handler->ipmi_watchdog_pretimeout) atomic_dec(&intf->event_waiters); @@ -1184,25 +1184,23 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) if (intf->maintenance_mode != mode) { switch (mode) { case IPMI_MAINTENANCE_MODE_AUTO: - intf->maintenance_mode = mode; intf->maintenance_mode_enable = (intf->auto_maintenance_timeout > 0); break; case IPMI_MAINTENANCE_MODE_OFF: - intf->maintenance_mode = mode; - intf->maintenance_mode_enable = 0; + intf->maintenance_mode_enable = false; break; case IPMI_MAINTENANCE_MODE_ON: - intf->maintenance_mode = mode; - intf->maintenance_mode_enable = 1; + intf->maintenance_mode_enable = true; break; default: rv = -EINVAL; goto out_unlock; } + intf->maintenance_mode = mode; maintenance_mode_update(intf); } @@ -1578,7 +1576,7 @@ static int i_ipmi_request(ipmi_user_t user, = IPMI_MAINTENANCE_MODE_TIMEOUT; if (!intf->maintenance_mode && !intf->maintenance_mode_enable) { - intf->maintenance_mode_enable = 1; + intf->maintenance_mode_enable = true; maintenance_mode_update(intf); } spin_unlock_irqrestore(&intf->maintenance_mode_lock, @@ -4129,7 +4127,7 @@ static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period) -= timeout_period; if (!intf->maintenance_mode && (intf->auto_maintenance_timeout <= 0)) { - intf->maintenance_mode_enable = 0; + intf->maintenance_mode_enable = false; maintenance_mode_update(intf); } } diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 444ea548dfe3..1c4bb4f6ce93 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -217,7 +217,7 @@ struct smi_info { unsigned char msg_flags; /* Does the BMC have an event buffer? */ - char has_event_buffer; + bool has_event_buffer; /* * If set to true, this will request events the next time the @@ -230,7 +230,7 @@ struct smi_info { * call. Generally used after a panic to make sure stuff goes * out. */ - int run_to_completion; + bool run_to_completion; /* The I/O port of an SI interface. */ int port; @@ -266,7 +266,7 @@ struct smi_info { * memory. Once that situation clears up, it will re-enable * interrupts. */ - int interrupt_disabled; + bool interrupt_disabled; /* From the get device id response... */ struct ipmi_device_id device_id; @@ -279,7 +279,7 @@ struct smi_info { * True if we allocated the device, false if it came from * someplace else (like PCI). */ - int dev_registered; + bool dev_registered; /* Slave address, could be reported from DMI. */ unsigned char slave_addr; @@ -303,19 +303,19 @@ struct smi_info { static int force_kipmid[SI_MAX_PARMS]; static int num_force_kipmid; #ifdef CONFIG_PCI -static int pci_registered; +static bool pci_registered; #endif #ifdef CONFIG_ACPI -static int pnp_registered; +static bool pnp_registered; #endif #ifdef CONFIG_PARISC -static int parisc_registered; +static bool parisc_registered; #endif static unsigned int kipmid_max_busy_us[SI_MAX_PARMS]; static int num_max_busy_us; -static int unload_when_empty = 1; +static bool unload_when_empty = true; static int add_smi(struct smi_info *smi); static int try_smi_init(struct smi_info *smi); @@ -457,7 +457,7 @@ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { start_disable_irq(smi_info); - smi_info->interrupt_disabled = 1; + smi_info->interrupt_disabled = true; if (!atomic_read(&smi_info->stop_operation)) smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); } @@ -467,7 +467,7 @@ static inline void enable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (smi_info->interrupt_disabled)) { start_enable_irq(smi_info); - smi_info->interrupt_disabled = 0; + smi_info->interrupt_disabled = false; } } @@ -712,7 +712,7 @@ static void handle_transaction_done(struct smi_info *smi_info) dev_warn(smi_info->dev, "Maybe ok, but ipmi might run very slowly.\n"); } else - smi_info->interrupt_disabled = 0; + smi_info->interrupt_disabled = false; smi_info->si_state = SI_NORMAL; break; } @@ -935,7 +935,7 @@ static void sender(void *send_info, spin_unlock_irqrestore(&smi_info->si_lock, flags); } -static void set_run_to_completion(void *send_info, int i_run_to_completion) +static void set_run_to_completion(void *send_info, bool i_run_to_completion) { struct smi_info *smi_info = send_info; enum si_sm_result result; @@ -1050,7 +1050,7 @@ static void poll(void *send_info) { struct smi_info *smi_info = send_info; unsigned long flags = 0; - int run_to_completion = smi_info->run_to_completion; + bool run_to_completion = smi_info->run_to_completion; /* * Make sure there is some delay in the poll loop so we can @@ -1075,7 +1075,7 @@ static void request_events(void *send_info) atomic_set(&smi_info->req_events, 1); } -static void set_need_watch(void *send_info, int enable) +static void set_need_watch(void *send_info, bool enable) { struct smi_info *smi_info = send_info; unsigned long flags; @@ -1223,7 +1223,7 @@ static int get_smi_info(void *send_info, struct ipmi_smi_info *data) return 0; } -static void set_maintenance_mode(void *send_info, int enable) +static void set_maintenance_mode(void *send_info, bool enable) { struct smi_info *smi_info = send_info; @@ -1364,7 +1364,7 @@ module_param_array(force_kipmid, int, &num_force_kipmid, 0); MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or" " disabled(0). Normally the IPMI driver auto-detects" " this, but the value may be overridden by this parm."); -module_param(unload_when_empty, int, 0); +module_param(unload_when_empty, bool, 0); MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are" " specified or found, default is 1. Setting to 0" " is useful for hot add of devices using hotmod."); @@ -3372,11 +3372,11 @@ static int try_smi_init(struct smi_info *new_smi) INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs)); new_smi->curr_msg = NULL; atomic_set(&new_smi->req_events, 0); - new_smi->run_to_completion = 0; + new_smi->run_to_completion = false; for (i = 0; i < SI_NUM_STATS; i++) atomic_set(&new_smi->stats[i], 0); - new_smi->interrupt_disabled = 1; + new_smi->interrupt_disabled = true; atomic_set(&new_smi->stop_operation, 0); atomic_set(&new_smi->need_watch, 0); new_smi->intf_num = smi_num; @@ -3384,7 +3384,7 @@ static int try_smi_init(struct smi_info *new_smi) rv = try_enable_event_buffer(new_smi); if (rv == 0) - new_smi->has_event_buffer = 1; + new_smi->has_event_buffer = true; /* * Start clearing the flags before we enable interrupts or the @@ -3418,7 +3418,7 @@ static int try_smi_init(struct smi_info *new_smi) rv); goto out_err; } - new_smi->dev_registered = 1; + new_smi->dev_registered = true; } rv = ipmi_register_smi(&handlers, @@ -3467,7 +3467,7 @@ static int try_smi_init(struct smi_info *new_smi) wait_for_timer_and_thread(new_smi); out_err: - new_smi->interrupt_disabled = 1; + new_smi->interrupt_disabled = true; if (new_smi->intf) { ipmi_unregister_smi(new_smi->intf); @@ -3503,7 +3503,7 @@ static int try_smi_init(struct smi_info *new_smi) if (new_smi->dev_registered) { platform_device_unregister(new_smi->pdev); - new_smi->dev_registered = 0; + new_smi->dev_registered = false; } return rv; @@ -3558,14 +3558,14 @@ static int init_ipmi_si(void) printk(KERN_ERR PFX "Unable to register " "PCI driver: %d\n", rv); else - pci_registered = 1; + pci_registered = true; } #endif #ifdef CONFIG_ACPI if (si_tryacpi) { pnp_register_driver(&ipmi_pnp_driver); - pnp_registered = 1; + pnp_registered = true; } #endif @@ -3581,7 +3581,7 @@ static int init_ipmi_si(void) #ifdef CONFIG_PARISC register_parisc_driver(&ipmi_parisc_driver); - parisc_registered = 1; + parisc_registered = true; /* poking PC IO addresses will crash machine, don't do it */ si_trydefaults = 0; #endif diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 2a7ff302d990..bd349240d50e 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -114,14 +114,14 @@ struct ipmi_smi_handlers { pretimeouts, or not. Used by the SMI to know if it should watch for these. This may be NULL if the SMI does not implement it. */ - void (*set_need_watch)(void *send_info, int enable); + void (*set_need_watch)(void *send_info, bool enable); /* Called when the interface should go into "run to completion" mode. If this call sets the value to true, the interface should make sure that all messages are flushed out and that none are pending, and any new requests are run to completion immediately. */ - void (*set_run_to_completion)(void *send_info, int run_to_completion); + void (*set_run_to_completion)(void *send_info, bool run_to_completion); /* Called to poll for work to do. This is so upper layers can poll for operations during things like crash dumps. */ @@ -132,7 +132,7 @@ struct ipmi_smi_handlers { setting. The message handler does the mode handling. Note that this is called from interrupt context, so it cannot block. */ - void (*set_maintenance_mode)(void *send_info, int enable); + void (*set_maintenance_mode)(void *send_info, bool enable); /* Tell the handler that we are using it/not using it. The message handler get the modules that this handler belongs -- cgit v1.2.3 From 20cd477c398decd6a8461ac48609b6c0ab4c7567 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 16 Apr 2014 10:49:20 +0400 Subject: of: add empty of_find_node_by_path() for !OF Add an empty version of of_find_node_by_path(). This fixes following build error for asoc tree: sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_probe': sound/soc/fsl/fsl_ssi.c:1471:2: error: implicit declaration of function 'of_find_node_by_path' [-Werror=implicit-function-declaration] sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL); Reported-by: Stephen Rothwell Signed-off-by: Alexander Shiyan Signed-off-by: Rob Herring --- include/linux/of.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 919bf211877d..3bad8d106e0e 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -374,6 +374,11 @@ static inline struct device_node *of_find_matching_node_and_match( return NULL; } +static inline struct device_node *of_find_node_by_path(const char *path) +{ + return NULL; +} + static inline struct device_node *of_get_parent(const struct device_node *node) { return NULL; -- cgit v1.2.3 From 9cc236827fde5e254fd995a0023c05c5ee3a3ba6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 18 Apr 2014 15:07:16 -0700 Subject: Shiraz has moved shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar Cc: Shiraz Hashim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .mailmap | 1 + MAINTAINERS | 2 +- arch/arm/boot/dts/spear320-hmi.dts | 2 +- arch/arm/mach-spear/headsmp.S | 2 +- arch/arm/mach-spear/platsmp.c | 2 +- arch/arm/mach-spear/time.c | 2 +- drivers/gpio/gpio-spear-spics.c | 4 ++-- drivers/irqchip/spear-shirq.c | 2 +- drivers/mtd/devices/spear_smi.c | 4 ++-- drivers/pwm/pwm-spear.c | 4 ++-- include/linux/mtd/spear_smi.h | 2 +- 11 files changed, 14 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/.mailmap b/.mailmap index 658003aa9446..df1baba43a64 100644 --- a/.mailmap +++ b/.mailmap @@ -99,6 +99,7 @@ Sachin P Sant Sam Ravnborg Sascha Hauer S.Çağlar Onur +Shiraz Hashim Simon Kelley Stéphane Witzmann Stephen Hemminger diff --git a/MAINTAINERS b/MAINTAINERS index 80399fff805d..e67ea2442041 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8315,7 +8315,7 @@ F: include/linux/compiler.h SPEAR PLATFORM SUPPORT M: Viresh Kumar -M: Shiraz Hashim +M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 3075d2d3a8be..0aa6fef5ce22 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Shiraz Hashim + * Copyright 2012 Shiraz Hashim * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S index ed85473a047f..c52192dc3d9f 100644 --- a/arch/arm/mach-spear/headsmp.S +++ b/arch/arm/mach-spear/headsmp.S @@ -3,7 +3,7 @@ * * Picked from realview * Copyright (c) 2012 ST Microelectronics Limited - * Shiraz Hashim + * Shiraz Hashim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 5c4a19887b2b..c19751fff2c6 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -4,7 +4,7 @@ * based upon linux/arch/arm/mach-realview/platsmp.c * * Copyright (C) 2012 ST Microelectronics Ltd. - * Shiraz Hashim + * Shiraz Hashim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 218ba5b67d92..64790353951f 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -2,7 +2,7 @@ * arch/arm/plat-spear/time.c * * Copyright (C) 2010 ST Microelectronics - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c index e9a0415834ea..30bcc539425d 100644 --- a/drivers/gpio/gpio-spear-spics.c +++ b/drivers/gpio/gpio-spear-spics.c @@ -2,7 +2,7 @@ * SPEAr platform SPI chipselect abstraction over gpiolib * * Copyright (C) 2012 ST Microelectronics - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -205,6 +205,6 @@ static int __init spics_gpio_init(void) } subsys_initcall(spics_gpio_init); -MODULE_AUTHOR("Shiraz Hashim "); +MODULE_AUTHOR("Shiraz Hashim "); MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction"); MODULE_LICENSE("GPL"); diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c index 8527743b5cef..3fdda3a40269 100644 --- a/drivers/irqchip/spear-shirq.c +++ b/drivers/irqchip/spear-shirq.c @@ -5,7 +5,7 @@ * Viresh Kumar * * Copyright (C) 2012 ST Microelectronics - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 363da96e6891..c4176b0f382d 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -6,7 +6,7 @@ * * Copyright © 2010 STMicroelectronics. * Ashish Priyadarshi - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -1089,5 +1089,5 @@ static struct platform_driver spear_smi_driver = { module_platform_driver(spear_smi_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim "); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim "); MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c index 8ad26b8bf418..cb2d4f0f9711 100644 --- a/drivers/pwm/pwm-spear.c +++ b/drivers/pwm/pwm-spear.c @@ -2,7 +2,7 @@ * ST Microelectronics SPEAr Pulse Width Modulator driver * * Copyright (C) 2012 ST Microelectronics - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -264,6 +264,6 @@ static struct platform_driver spear_pwm_driver = { module_platform_driver(spear_pwm_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Shiraz Hashim "); +MODULE_AUTHOR("Shiraz Hashim "); MODULE_AUTHOR("Viresh Kumar "); MODULE_ALIAS("platform:spear-pwm"); diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h index 8ae1726044c3..581603ac1277 100644 --- a/include/linux/mtd/spear_smi.h +++ b/include/linux/mtd/spear_smi.h @@ -1,6 +1,6 @@ /* * Copyright © 2010 ST Microelectronics - * Shiraz Hashim + * Shiraz Hashim * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any -- cgit v1.2.3 From 8b32201de1f87878ace971bfdc2846a4f3a5bb2b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 18 Apr 2014 15:07:17 -0700 Subject: wait: explain the shadowing and type inconsistencies Stick in a comment before someone else tries to fix the sparse warning this generates. Suggested-by: Andrew Morton Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.org Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/wait.h b/include/linux/wait.h index e7d9d9ed14f5..bd68819f0815 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -191,11 +191,23 @@ wait_queue_head_t *bit_waitqueue(void *, int); (!__builtin_constant_p(state) || \ state == TASK_INTERRUPTIBLE || state == TASK_KILLABLE) \ +/* + * The below macro ___wait_event() has an explicit shadow of the __ret + * variable when used from the wait_event_*() macros. + * + * This is so that both can use the ___wait_cond_timeout() construct + * to wrap the condition. + * + * The type inconsistency of the wait_event_*() __ret variable is also + * on purpose; we use long where we can return timeout values and int + * otherwise. + */ + #define ___wait_event(wq, condition, state, exclusive, ret, cmd) \ ({ \ __label__ __out; \ wait_queue_t __wait; \ - long __ret = ret; \ + long __ret = ret; /* explicit shadow */ \ \ INIT_LIST_HEAD(&__wait.task_list); \ if (exclusive) \ -- cgit v1.2.3