From a4f606ea73d56d15f28653d2242e54d58bb612e5 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Mon, 11 Jun 2012 11:59:36 +0800 Subject: {nl,cfg,mac}80211: fix the coding style related to mesh parameters fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 6 +-- include/linux/nl80211.h | 98 ++++++++++++++++++++++++----------------------- 2 files changed, 54 insertions(+), 50 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af8918514..f831078182de 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1443,7 +1443,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1455,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,7 +1467,7 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 970afdf5a605..c61e1621822c 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2090,78 +2090,80 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2203,34 +2205,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ -- cgit v1.2.3 From 535588e61a007416f46cf08b4ccb6cc73b3f6fb0 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 11 Jun 2012 18:14:16 -0700 Subject: ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f831078182de..98c86ff657bb 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1589,6 +1589,8 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_MICROSOFT 0x0050f2 +#define WLAN_OUI_TYPE_MICROSOFT_WPA 1 /* * WMM/802.11e Tspec Element -- cgit v1.2.3 From 4a4ab0d7c9abe4e403bcea6ae2fc5d3f28a64a29 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Jun 2012 11:17:11 +0200 Subject: nl80211: fix sched scan match attribute name It should be NL80211_SCHED_SCAN_MATCH_ATTR_SSID as documented, not NL80211_ATTR_SCHED_SCAN_MATCH_SSID. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 5 ++++- net/wireless/nl80211.c | 4 ++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c61e1621822c..e7b1fc1fe26b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1963,7 +1963,7 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1971,6 +1971,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index dd94ee5fb40a..7db0aee8cd5b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -250,7 +250,7 @@ nl80211_rekey_policy[NUM_NL80211_REKEY_DATA] = { static const struct nla_policy nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = { - [NL80211_ATTR_SCHED_SCAN_MATCH_SSID] = { .type = NLA_BINARY, + [NL80211_SCHED_SCAN_MATCH_ATTR_SSID] = { .type = NLA_BINARY, .len = IEEE80211_MAX_SSID_LEN }, }; @@ -4253,7 +4253,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX, nla_data(attr), nla_len(attr), nl80211_match_policy); - ssid = tb[NL80211_ATTR_SCHED_SCAN_MATCH_SSID]; + ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]; if (ssid) { if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; -- cgit v1.2.3 From 73c3df3ba3f2d7fe3ea47f944282f3cda31c5505 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Jun 2012 11:17:14 +0200 Subject: cfg80211/nl80211: fix kernel-doc Add missing entries to nl80211.h and fix the kernel-doc notation in cfg80211.h. Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 33 ++++++++++++++++++++++++++++----- include/net/cfg80211.h | 8 ++++---- 2 files changed, 32 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e7b1fc1fe26b..e4f41bdebc07 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -277,6 +277,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -456,6 +462,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -771,6 +781,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -1006,6 +1023,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1063,7 +1082,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1087,10 +1106,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1117,7 +1136,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1184,7 +1203,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -2507,6 +2525,11 @@ enum nl80211_band { NL80211_BAND_5GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 778e533a9734..76d54725ea31 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -627,10 +627,10 @@ struct sta_bss_parameters { * @llid: mesh local link id * @plid: mesh peer link id * @plink_state: mesh peer link state - * @signal: the signal strength, type depends on the wiphy's signal_type - NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. - * @signal_avg: avg signal strength, type depends on the wiphy's signal_type - NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal: The signal strength, type depends on the wiphy's signal_type. + * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. + * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station -- cgit v1.2.3 From ac1073a61d73b6277794d2efc872eb7e1b706b5c Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:06 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout Add the mesh configuration parameters dot11MeshHWMProotInterval and dot11MeshHWMPactivePathToRootTimeout to be used by proactive PREQ mechanism. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 9 +++++++++ include/net/cfg80211.h | 9 +++++++++ net/mac80211/cfg.c | 6 ++++++ net/mac80211/debugfs_netdev.c | 6 ++++++ net/wireless/mesh.c | 4 ++++ net/wireless/nl80211.c | 15 ++++++++++++++- 6 files changed, 48 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e4f41bdebc07..6936fabe8797 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2185,6 +2185,13 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2211,6 +2218,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 76d54725ea31..e52b38d7b1b6 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -842,6 +842,13 @@ struct bss_parameters { * @rssi_threshold: the threshold for average signal strength of candidate * station to establish a peer link * @ht_opmode: mesh HT protection mode + * + * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs + * receiving a proactive PREQ shall consider the forwarding information to + * the root mesh STA to be valid. + * + * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive + * PREQs are transmitted. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -866,6 +873,8 @@ struct mesh_config { bool dot11MeshForwarding; s32 rssi_threshold; u16 ht_opmode; + u32 dot11MeshHWMPactivePathToRootTimeout; + u16 dot11MeshHWMProotInterval; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index cd8b1fb05d42..d93cda1c4215 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1590,6 +1590,12 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); } + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask)) + conf->dot11MeshHWMPactivePathToRootTimeout = + nconf->dot11MeshHWMPactivePathToRootTimeout; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask)) + conf->dot11MeshHWMProotInterval = + nconf->dot11MeshHWMProotInterval; return 0; } diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index c429417e1322..a8cea70902e4 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -510,6 +510,10 @@ IEEE80211_IF_FILE(dot11MeshHWMPRannInterval, IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC); IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC); IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC); +IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout, + u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC); +IEEE80211_IF_FILE(dot11MeshHWMProotInterval, + u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC); #endif #define DEBUGFS_ADD_MODE(name, mode) \ @@ -611,6 +615,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(dot11MeshGateAnnouncementProtocol); MESHPARAMS_ADD(rssi_threshold); MESHPARAMS_ADD(ht_opmode); + MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout); + MESHPARAMS_ADD(dot11MeshHWMProotInterval); #undef MESHPARAMS_ADD } #endif diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index b44c736bf9cf..2f141cfd581e 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -14,6 +14,8 @@ #define MESH_PATH_TIMEOUT 5000 #define MESH_RANN_INTERVAL 5000 +#define MESH_PATH_TO_ROOT_TIMEOUT 6000 +#define MESH_ROOT_INTERVAL 5000 /* * Minimum interval between two consecutive PREQs originated by the same @@ -62,6 +64,8 @@ const struct mesh_config default_mesh_config = { .dot11MeshForwarding = true, .rssi_threshold = MESH_RSSI_THRESHOLD, .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, + .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, + .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, }; const struct mesh_setup default_mesh_setup = { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7db0aee8cd5b..f8930db613df 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3469,7 +3469,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD, cur_params.rssi_threshold) || nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE, - cur_params.ht_opmode)) + cur_params.ht_opmode) || + nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + cur_params.dot11MeshHWMPactivePathToRootTimeout) || + nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + cur_params.dot11MeshHWMProotInterval)) goto nla_put_failure; nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); @@ -3505,6 +3509,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 }, [NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 }, [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 }, + [NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 }, + [NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 }, }; static const struct nla_policy @@ -3612,6 +3618,13 @@ do {\ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout, + mask, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + nla_get_u32); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, + mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + nla_get_u16); if (mask_out) *mask_out = mask; -- cgit v1.2.3 From a69cc44fe9ebb806c5f3f8bd83fb4a50ca63647b Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:07 +0800 Subject: mac80211: implement the proactive PREQ generation Generate the proactive PREQ element as defined in Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012 based on the selection of dot11MeshHWMPRootMode as follow: dot11MeshHWMPRootMode (2) is proactivePREQnoPREP dot11MeshHWMPRootMode (3) is proactivePREQwithPREP The proactive PREQ is generated based on the interval defined by dot11MeshHWMProotInterval. With this change, proactive RANN element is now generated if the dot11MeshHWMPRootMode is set to (4) instead of (1). Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 42 ++++++++++++++++++++++++++++++++++++++++++ net/mac80211/mesh.c | 10 ++++++++-- net/mac80211/mesh_hwmp.c | 27 ++++++++++++++++++++++++--- 3 files changed, 74 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 98c86ff657bb..6e0601189db9 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -567,6 +567,26 @@ struct ieee80211s_hdr { #define MESH_FLAGS_AE 0x3 #define MESH_FLAGS_PS_DEEP 0x4 +/** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + /** * struct ieee80211_quiet_ie * @@ -1474,6 +1494,28 @@ enum { IEEE80211_PATH_METRIC_VENDOR = 255, }; +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; /* * IEEE 802.11-2007 7.3.2.9 Country information element diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 7cf19509fb68..6bff3c4d17dd 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -541,11 +541,17 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + u32 interval; mesh_path_tx_root_frame(sdata); + + if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) + interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; + else + interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; + mod_timer(&ifmsh->mesh_path_root_timer, - round_jiffies(TU_TO_EXP_TIME( - ifmsh->mshcfg.dot11MeshHWMPRannInterval))); + round_jiffies(TU_TO_EXP_TIME(interval))); } #ifdef CONFIG_PM diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 9b6da2de660d..a6b08f5c4612 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1154,13 +1154,34 @@ mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; u32 interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; - u8 flags; + u8 flags, target_flags = 0; flags = (ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol) ? RANN_FLAG_IS_GATE : 0; - mesh_path_sel_frame_tx(MPATH_RANN, flags, sdata->vif.addr, + + switch (ifmsh->mshcfg.dot11MeshHWMPRootMode) { + case IEEE80211_PROACTIVE_RANN: + mesh_path_sel_frame_tx(MPATH_RANN, flags, sdata->vif.addr, cpu_to_le32(++ifmsh->sn), 0, NULL, 0, broadcast_addr, - 0, sdata->u.mesh.mshcfg.element_ttl, + 0, ifmsh->mshcfg.element_ttl, cpu_to_le32(interval), 0, 0, sdata); + break; + case IEEE80211_PROACTIVE_PREQ_WITH_PREP: + flags |= IEEE80211_PREQ_PROACTIVE_PREP_FLAG; + case IEEE80211_PROACTIVE_PREQ_NO_PREP: + interval = ifmsh->mshcfg.dot11MeshHWMPactivePathToRootTimeout; + target_flags |= IEEE80211_PREQ_TO_FLAG | + IEEE80211_PREQ_USN_FLAG; + mesh_path_sel_frame_tx(MPATH_PREQ, flags, sdata->vif.addr, + cpu_to_le32(++ifmsh->sn), target_flags, + (u8 *) broadcast_addr, 0, broadcast_addr, + 0, ifmsh->mshcfg.element_ttl, + cpu_to_le32(interval), + 0, cpu_to_le32(ifmsh->preq_id++), sdata); + break; + default: + mhwmp_dbg("Proactive mechanism not supported"); + return; + } } -- cgit v1.2.3 From 728b19e5fb9bbebbd580784a092b786fe379ed8e Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 14 Jun 2012 02:06:10 +0800 Subject: {nl,cfg,mac}80211: implement dot11MeshHWMPconfirmationInterval As defined in section 13.10.9.3 Case D (802.11-2012), this control variable is used to limit the mesh STA to send only one PREQ to a root mesh STA within this interval of time (in TUs). The default value for this variable is set to 2000 TUs. However, for current implementation, the maximum configurable of dot11MeshHWMPconfirmationInterval is restricted by dot11MeshHWMPactivePathTimeout. Signed-off-by: Chun-Yeow Yeoh [line-break commit log] Signed-off-by: Johannes Berg --- include/linux/nl80211.h | 5 +++++ include/net/cfg80211.h | 4 ++++ net/mac80211/cfg.c | 3 +++ net/mac80211/debugfs_netdev.c | 3 +++ net/mac80211/mesh.h | 2 ++ net/mac80211/mesh_hwmp.c | 7 ++++++- net/wireless/mesh.c | 2 ++ net/wireless/nl80211.c | 9 ++++++++- 8 files changed, 33 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 6936fabe8797..b7c3b737ddde 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2192,6 +2192,10 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between * proactive PREQs are transmitted. * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2220,6 +2224,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HT_OPMODE, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e52b38d7b1b6..f0163a10b8ce 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -849,6 +849,9 @@ struct bss_parameters { * * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive * PREQs are transmitted. + * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) + * during which a mesh STA can send only one Action frame containing + * a PREQ element for root path confirmation. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -875,6 +878,7 @@ struct mesh_config { u16 ht_opmode; u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; + u16 dot11MeshHWMPconfirmationInterval; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5bd316c0a63d..6e25ac4873c7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1596,6 +1596,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask)) conf->dot11MeshHWMProotInterval = nconf->dot11MeshHWMProotInterval; + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) + conf->dot11MeshHWMPconfirmationInterval = + nconf->dot11MeshHWMPconfirmationInterval; return 0; } diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index a8cea70902e4..512c894893d6 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -514,6 +514,8 @@ IEEE80211_IF_FILE(dot11MeshHWMPactivePathToRootTimeout, u.mesh.mshcfg.dot11MeshHWMPactivePathToRootTimeout, DEC); IEEE80211_IF_FILE(dot11MeshHWMProotInterval, u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC); +IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval, + u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC); #endif #define DEBUGFS_ADD_MODE(name, mode) \ @@ -617,6 +619,7 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(ht_opmode); MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout); MESHPARAMS_ADD(dot11MeshHWMProotInterval); + MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval); #undef MESHPARAMS_ADD } #endif diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index c7400a23b64b..faaa39bcfd10 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -104,6 +104,7 @@ enum mesh_deferred_task_flags { * an mpath to a hash bucket on a path table. * @rann_snd_addr: the RANN sender address * @rann_metric: the aggregated path metric towards the root node + * @last_preq_to_root: Timestamp of last PREQ sent to root * @is_root: the destination station of this path is a root node * @is_gate: the destination station of this path is a mesh gate * @@ -131,6 +132,7 @@ struct mesh_path { spinlock_t state_lock; u8 rann_snd_addr[ETH_ALEN]; u32 rann_metric; + unsigned long last_preq_to_root; bool is_root; bool is_gate; }; diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 35e3acbe2262..bea52479e3aa 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -98,6 +98,8 @@ static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) #define max_preq_retries(s) (s->u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries) #define disc_timeout_jiff(s) \ msecs_to_jiffies(sdata->u.mesh.mshcfg.min_discovery_timeout) +#define root_path_confirmation_jiffies(s) \ + msecs_to_jiffies(sdata->u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval) enum mpath_frame_type { MPATH_PREQ = 0, @@ -811,11 +813,14 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, } if ((!(mpath->flags & (MESH_PATH_ACTIVE | MESH_PATH_RESOLVING)) || - time_after(jiffies, mpath->exp_time - 1*HZ)) && + (time_after(jiffies, mpath->last_preq_to_root + + root_path_confirmation_jiffies(sdata)) || + time_before(jiffies, mpath->last_preq_to_root))) && !(mpath->flags & MESH_PATH_FIXED)) { mhwmp_dbg("%s time to refresh root mpath %pM", sdata->name, orig_addr); mesh_queue_preq(mpath, PREQ_Q_F_START | PREQ_Q_F_REFRESH); + mpath->last_preq_to_root = jiffies; } if ((SN_LT(mpath->sn, orig_sn) || (mpath->sn == orig_sn && diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2f141cfd581e..3b73b07486cf 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -16,6 +16,7 @@ #define MESH_RANN_INTERVAL 5000 #define MESH_PATH_TO_ROOT_TIMEOUT 6000 #define MESH_ROOT_INTERVAL 5000 +#define MESH_ROOT_CONFIRMATION_INTERVAL 2000 /* * Minimum interval between two consecutive PREQs originated by the same @@ -66,6 +67,7 @@ const struct mesh_config default_mesh_config = { .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, + .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, }; const struct mesh_setup default_mesh_setup = { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f8930db613df..a363ca17bfc5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3473,7 +3473,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, nla_put_u32(msg, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, cur_params.dot11MeshHWMPactivePathToRootTimeout) || nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, - cur_params.dot11MeshHWMProotInterval)) + cur_params.dot11MeshHWMProotInterval) || + nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + cur_params.dot11MeshHWMPconfirmationInterval)) goto nla_put_failure; nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); @@ -3511,6 +3513,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 }, [NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 }, [NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 }, + [NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 }, }; static const struct nla_policy @@ -3625,6 +3628,10 @@ do {\ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, + dot11MeshHWMPconfirmationInterval, mask, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + nla_get_u16); if (mask_out) *mask_out = mask; -- cgit v1.2.3